Custom Query (10423 matches)

installed 3.10.0 - can't log onto ftp sites. Give me access to previous build!

Error: The data connection could not be established: ECONNREFUSED - Connection refused by server Error: Connection timed out Error: Failed to retrieve directory listing

FileZilla Client

Version: 3.10.0

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-01-07 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.20 SQLite: 3.8.7.2

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

Version 3.9.0.6 .has been working just fine. I updated to version 3.10 on my desktop iMac (about 1 year old). Now when I connect to my ftp site using Site Manager nothing happens on the right hand side - it simply says Not connected to any server, If try again using Site Manager I get "FileZilla is already connected".

I've gone back to the previous version so I am able to keep working.

Thank you for your support for this fine product.

Status: Resolving address of ftp.bodingh.se Status: Connecting to 62.20.1.132:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Error: GnuTLS error -12: A TLS fatal alert has been received. Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of ftp.bodingh.se Status: Connecting to 62.20.1.132:21... Status: Connection established, waiting for welcome message... Response: 220 FTP service Command: AUTH TLS Response: 234 Proceed with negotiation. Status: Initializing TLS... Error: GnuTLS error -12: A TLS fatal alert has been received. Error: Could not connect to server

Problem is with 3.10.0 Version 3.9.0.6 works fine, see below:

Status: Connecting to 62.20.1.132:21... Status: Connection established, waiting for welcome message... Response: 220 FTP service Command: USER d3854 Response: 331 Please specify the password. Command: PASS Response: 230 Login successful. Command: SYST Response: 215 UNIX Type: L8 Command: FEAT Response: 211-Features: Response: AUTH SSL Response: AUTH TLS Response: EPRT Response: EPSV Response: MDTM Response: PASV Response: PBSZ Response: PROT Response: REST STREAM Response: SIZE Response: TVFS Response: UTF8 Response: 211 End Command: OPTS UTF8 ON Response: 200 Always in UTF8 mode. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" Command: TYPE I Response: 200 Switching to Binary mode. Command: PASV Response: 227 Entering Passive Mode (62,20,1,132,192,221). Command: LIST Response: 150 Here comes the directory listing. Response: 226 Directory send OK. Status: Directory listing successful

I'm getting what this user is getting in ticket #9737 (​http://trac.filezilla-project.org/ticket/9737), except I have upgraded to 3.10.0. Please advise. Thanks!

Since many month I can´t update my FileZilla. Whats wrong?

08:39:22: XRC error: XRC resource "ID_MENUBAR" (class "wxMenuBar") not found 08:39:22: XRC error: XRC resource "ID_TOOLBAR" (class "wxToolBar") not found 08:39:22: Werkzeugleiste kann nicht aus Ressourcendatei geladen werden 08:39:22: XRC error: XRC resource "ID_QUICKCONNECTBAR" (class "wxPanel") not found 08:39:22: Quickconnect-Leiste kann nicht aus Ressourcendatei geladen werden 08:39:23: XRC error: XRC resource "ID_WELCOME" (class "wxDialog") not found

To any ftp server.

Since the new update recently I am having serious issues with connecting and dropping out while transferring files to hosting server. If and when it does connect it fails after attempting to enter any other folders.

Error: Connection timed out Error: Failed to retrieve directory listing Response: 421 Too many connections (8) from this IP Error: Could not connect to server

I have already been in contact with my hosting service and everything is working there.

Can you tell me how long a fix will be done and a new update as I need to upload within the next 72 hours client files to server.

Kind regards.

Status: Connecting to 68.232.178.230:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Command: USER 1047881 Response: 331 Username ok, send password. Command: PASS * Response: 530 Invalid user Error: Critical error: Could not connect to server

it has been since the update.i am new at this please help or advised how to fix i went as far as unistall and clean install.no luck

Hello,

After upgrading to the latest version of Filezilla, 3.10.0, it no longer allows me to download or edit files on servers.

The status claims success: Status: File transfer successful, transferred 1,017 bytes in 1 second

This behavior happens regardless of how I download the file (right click download, drag & drop, right click and "edit")

When I drag and drop, it appears in the target folder briefly, but disappears.

Up to this morning I have had no difficulties with Filezilla either when uploading or downloading to a site I have been using for year. This morning I updated Filezilla. Immediately I had a popup notice informing me that the licence to this site was not recognised. The notice allowed me to override this. However, I noticed that the check box allowing me to indicate that this site can be trusted in future had not been enabled.

The site I am trying to connect to is run by Freeola.com, and I was attempting a connection to vip4.freeola.net.

This is the log of the attempted connection:-

Status: Resolving address of vip4.freeola.net Status: Connecting to 193.0.158.4:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (193,0,158,4,182,147) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing.

I have included an attachment which is the licence warning I received on a pop up screen.

I am concerned that up to noon today I was able to use your software to connect to this site, as I have been doing for several years, and then with the 'improved' update it is now effectively useless to me.

I've just updated to the latest version of FileZilla. Now it times out everytime and I have been unable to do a successful upload. I know it's the version of FileZilla at fault, because I then tried again, on my laptop, with the previous version still installed and succeeded without any problem at all. Here is the sequence showing where it times out:- Status: Resolving address of hannahmarco.co.uk Status: Connecting to 173.254.28.74:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (173,254,28,74,81,14) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

Status: Resolving address of ftp Status: Connecting to .... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate...

This version of Filezilla is telling me "Unknown sertificate" on remote server

Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing of "/public_html"...

hangs here for like 10-15 secs

Command: CWD /public_html Response: 250 OK. Current directory is /public_html Command: PWD Response: 257 "/public_html" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (212,125,204,217,125,118) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

It stops here..

FileZilla Client

Version: 3.10.0

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-01-07 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.20 SQLite: 3.8.7.2

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

Previous version worked fine, then desided to upgrade after having done my transfers, and it is now borked. In advance, Thanks for fixing.

Since I upgraded to the latest version, I can no longer access my FTP site. It says:

Status: Resolving address of ftp.XXXX.com Status: Connecting to XX.XXX.XXX.XXX:XX... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing of "/public_html/XXXX/XXXXX"... Command: CWD /public_html/ Response: 250 OK. Current directory is /public_html/XXXX/XXXXX Command: PWD Response: 257 "/public_html/XXXX/XXXXX" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (XX,XXX,XXX,XXX,XXX,XX) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

Receiving the current error message after update. Also had another message advising that the certificate was unknown. I overrided this and selected always trust for future sessions, but I don't think this helped.

Please advise a solution.

Status: Resolving address of majestixmedia.com.au Status: Connecting to 112.140.176.160:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (112,140,176,160,16,41) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

I just installed the 3.10.0.1 version and since then couldn't connect to server. Then I downgraded to version 3.8.1 and it works again. Cheers

When I try to access a client it times out at Status: Initializing TLS....

Hope this message finds you well. I have been using your software for many years to manage my website without any problems. However, after updating the ftp client today, I get errors pasted below. I have already asked for help from my ISP who suggested I turn off passive mode which I have tried to do to no avail. I also attached screen grabs of my passive and active mode settings. I hope this helps. Thank you.

Start of session log

Status: Resolving address of www.thefittingstudio.co.uk

Status: Connecting to 195.238.172.209:21...

Status: Connection established, waiting for welcome message...

Status: Initializing TLS...

Status: Verifying certificate...

Status: TLS connection established.

Status: Server does not support non-ASCII characters.

Status: Connected

Status: Retrieving directory listing...

Command: PWD

Response: 257 "/" is your current location

Command: TYPE I

Response: 200 TYPE is now 8-bit binary

Command: PASV

Response: 227 Entering Passive Mode (195,238,172,209,72,250)

Command: MLSD

Error: Connection timed out

Error: Failed to retrieve directory listing

End of session log

after updating your latest version will not connect to most of my sites. my other computer has an older version and it works great.

it hooks up then: Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

I upgraded to newer version today and now it won't work.

Getting errors such as: -server not supporting ASCII characters -Certificate unknown

First upgrade was to 3.10.0.0, picked up a virus from 3rd party download that knocked out Norton (Ticket #10029), that problem has been resolved, the upgrade to 3.10.0.1. still not working:

Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing of "/public_html/xxxxxx/temp"... Command: CWD /public_html/xxxxxx/temp Response: 250 OK. Current directory is /public_html/xxxxxx/temp Command: PWD Response: 257 "/public_html/xxxxxx/temp" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (xx,xxx,xxx,xxx,209,89) Command: MLSD Error: The data connection could not be established: ETIMEDOUT - Connection attempt timed out

Hello,

I believe to have discovered a bug with the following:

If I access an ftp server in passive mode, that return its internal address instead of the public address after a PASV command, FileZilla with the “Use the server external IP address instead” option selected (under the Passive mode) does exactly that and the connection works (expected behavior).

When FileZilla is setup to use a FTP Generic Proxy (socks 5), that behavior seems to break and I can see in a wireshark trace, FileZilla requesting to the Proxy server to make a connection to the incorrect internal address instead of the external address.

Version of FileZilla: 3.10.0.1 Proxy server used : CCproxy 8.0 - ​http://www.youngzsoft.net/ccproxy/

Thank you, Franck Fuziol | Director IT, Infrastructure Architecture| Seminole Gaming phone: +1 954.327.7708; mobile: +1 954.520.0357

I updated FileZilla when prompted today but receive an error message

I am not able to connect to the server, filezilla requests confirmation on some not certified server, after to accept it, the directory listing is not complete and the connection fails.

I reverted to 3.9.0.6 and it is working properly.

This new version fails to connect to previously accounts set up in Site Manager using version 3.9.0.6 and earlier. Failure is the result of "Server does not support non-ASCI character".

I am seeing a recurring issue whereby navigating to a remote folder after initially loading FileZilla client results in the corresponding commands in the command log at the top overwriting the icon toolbar. I have attached a screen capture.

My issue seems to be similar to tickets #9989 and #10025. When the recent update was installed, I could no longer connect to a particular directory on my server. I have numerous directories, however this is the only non SSL directory that I have. I can connect to all my other directories. To isolate the problem as much as possible, I installed a different FTP program, and am able to connect with no problem. Below is the log i get when I try to connect.

Status: Connecting to 204.10.79.185:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220 Serv-U FTP Server v14.0 ready... Trace: CFtpControlSocket::SendNextCommand() Command: AUTH TLS Trace: CRealControlSocket::OnClose(0) Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Error: Could not connect to server Status: Waiting to retry... Status: Connecting to 204.10.79.185:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220 Serv-U FTP Server v14.0 ready... Trace: CFtpControlSocket::SendNextCommand() Command: AUTH TLS Trace: CRealControlSocket::OnClose(0) Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Error: Could not connect to server

Ubuntu 14.10 x64, Intel Core i7

I've ran into an issue where I cant use certain keyboard keys within any of the input boxes. When trying to enter control-a for example, my cpu spikes for about 30 seconds, and then either all of the text is selected (as its suppose to) or the command is just ignored.

Examples of keys/commands with issue: control-a control-x control-y backspace home/end

Note: The same behavior happens when I use Ubuntu's On Screen keyboard.

Hello,

Since OSX Mountain Lion, Apple added the fullscreen mode ​http://support.apple.com/kb/PH11359

I would be very pleased to use Filezilla in his own screen. I hope you could do that :)

Hello,

Could you add a new set of icons for OSX theme in OSX Yosemite style ?

cf. ​http://www.apple.com/osx/design/

It would be a refreshing interface.

Thank you.

I updated my program last night and I have not been able to connect to our server since. I am using the same settings and access type as before my update. Each time I try to connect I get two errors.

GnuTLS -15: An unexpected TLS packet was received. Could not connect to server

I haven't changed anything in my credentials or log in information. I am unsure as to why the program will not allow me to log in.

Client version is 3.10.0.1

When started the debug level is 0. Go to Edit -> Settings... -> Debug section. Change 'Debug information in message log:' drop-down from '0-None' to any other, eg '1-Warning' Click OK. Changes applied then. Bot they are valid only for current instance of the client. If you exit the client and start it again the debug level will revert to 0-None

Also there isn't any key to store the value in %appdata%\FileZilla\filezilla.xml

The issue is reproduced both for fresh installation and for upgrading.

In version 3.10.0.1 any existing sites defined in site manager are now set to "Use explicit FTP over TLS if available" instead of whatever settings were previously in use. To clear up the issue they must go toe Site Manager and change the encryption back to the previous setting.

This is causing many problems as users can no longer connect to sites that were previously defined and do not support encryption.

I am running Windows 7 64 bit. Here is the information from "about"

FileZilla Client

Version: 3.10.0.1

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-01-12 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.20 SQLite: 3.8.7.2

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

Site Manager dropdown list of sits to connect to doesn't scroll nor does it expand sideways into multiple columns. it doesn't fit vertically on my 1440x900 screen. the menu has some sort of disabled control at the top. but I cannot view or select any of the bottom 7 or so items at the bottom of the list. they are not visible and cannot be reached.

This bug is same as Ticket #9542.

Operation steps:

When browse the FTP directories, if the directories' name is Chinese words, and double click someone directory in the file list window, then the "remote site" and the "directory-name" of remote-directory-tree are all show "Unrecognizable Code".

Environment: FTP Server side software: Xlight FTP Server v3.7.3 Server OS: Windows 2003 server, Language: zh_CN (Simplified)

FTP Client side software: FileZilla Client v3.10.0.1 Client OS: Windows 7 64bit, Language: zh_CN (Simplified)

add a FTP site in Site Manager window, use the DEFAULT setting (NOT do any setting) for the character-set: Auto check.

connect to FTP server, browse and double click someone directory in the file list view which has some Chinese words, then the "remote site" and the directory-name of the directory-tree are showed the "Unrecognizable Code". (like Ticket #10096)

When I set character-set to "Use the custom character-set" [set the value is: GBK] in Site Manager, and re-do the above operations, the "remote site" and the directory-name of the directory-tree are all showed the correct Chinese words.

So.., I guess the issue comes from the function of Auto-Check character-set.

(My environment informations of the server and client are all in the Ticket #10096)

When I try to overwrite a file (either because I'm uploading a file that already exists on the server, or the other way around), I get the following notification:

An assertion failed! ./src/common/dpycmn.cpp(119): assert "n < GetCount()" failed in wxDisplay(): An invalid index was passed to wxDisplay

(backtrace attached)

After clicking continue (twice), the up/download seems to further work as expected.

I think this was introduced when switching to wxWidgets 3, which was done with FileZilla 3.9.

I am using FileZilla 3.10.0.2 on Arch Linux x86_64, and there is at least one Arch user that has the same problem (​report). There is also a ​report from a Debian user with the same problem, also with FileZilla 3.9.

I have a site, with a bookmark in my site manager. I wish to delete the bookmark but am unable to do so.

After deleting the bookmark, its information is still displayed in the main area of the site manager. If I then click OK to save changes, or if click another site in the list, I get an error message "Site Manager - Invalid Data: You have to enter a hostname", and am unable to do anything else, except hit cancel, and revert the bookmark deletion. All of my other sites do still have valid hostnames, so I am not sure what the error is referring to.

Thus, there is currently no way to just delete a bookmark, without deleting the entire site it is attached to and then readding the site.

FileZilla Client

Version: 3.10.0.1

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-01-12 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.20 SQLite: 3.8.7.2

Operating system:

Name: Windows 8.1 (build 9600), 64-bit edition Version: 6.3 Platform: 64-bit system

That is about it, I installed the upgrade and came up with a blank list of FTP sites when I opened Site Manager.

not a great restart when I was trying to get some price changes posted...

Thanks for looking into it.

I saw one ticket on this but it was marked resolved...

Filezilla is opened and a connection is made to my remote server. I CMD-click multiple files and click EDIT (my editor is Text Wrangler on Mac). All appears fine except some of the files are not opened. I re-select one of the files that did not open and click EDIT again which produces "Opening failed. The file <filepath> could not be opened: The associated command failed." Repeated attempts produce the same error.

If I rename the file from Filezilla (and even rename back to the original filename) then Filezilla will properly open the file.

Hello,

When i have right click into the detailed window have a look into the screenshot.

Photo: ​http://i.imgur.com/5ueuMiH.png

• thanks!

When I try to create a Custom Filetype Association in the settings, FileZilla strips out the space when I try to specify

php "/Applications/Sublime Text.app"

. I get a pop-error window which reads:

Failed to validate settings Associated program not found: "/Applications/Sublime

I've tried entering the following different specifications:

php "/Applications/Sublime Text.app" -open
php /Applications/Sublime\ Text.app -open
php ""/Applications/Sublime Text.app"" -open
php '/Applications/Sublime Text.app' -open
php "/Applications/Sublime\ Text.app" -open
php "/Applications/Sublime\\ Text.app" -open
php /Applications/Sublime\\ Text.app -open

(As well as other variations without the "-open") Interestingly, double quotes and double backslash got VERY close.

Since there are work-arounds (I believe), this is not a barn-burner. It may be a documentation issue, I just have not able to google an answer that works.

BTW, cut'n'Paste is very quirky /and/or not working in this settings dialog as well as the error message window.

...Wait a minit! Now the double quote double back slash does not preserve the space. I swear it did-- Is this related to the cut'n'paste issue? I must be loosing my mind!

I have just installed the latest version of FileZilla. When I attempt 'Site manager - connect' I get error messages: Fails to retrieve directory listing & Not connected to any server.

Hello.

Apologies if this has already been reported - but I couldn't find anything when I did a search.

Anyway, after the latest Filezilla update to 3.10.0.2, a server I transfer files from has numerous files of over 2GB in size (a PVR with an inbuilt FTP client) - however - should there be a problem and the file needs to be resumed I am told in the message log that "Server does not support resume of files over > 2GB". Prior to the latest Filezilla update, there was no problem transferring files of any size - the server that the files are being transferred from has not had any software changes prior to or after the latest Filezilla update. The previous version of Filezilla that was installed was 3.10.0

updated to 3.10.0.1 last week Failed to login Today updated to 3.10.0.2 Failed to login

Seems to be same as Bug ticket #10089

Log:

Status: Resolving address of www.cairnsholidayhomes.com.au Status: Connecting to 113.20.1.106:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Error: Connection timed out Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of www.cairnsholidayhomes.com.au Status: Connecting to 113.20.1.106:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 2 of 50 allowed. Response: 220-Local time is now 18:35. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220 You will be disconnected after 15 minutes of inactivity. Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: Connection timed out Error: Could not connect to server Status: Resolving address of www.cairnsholidayhomes.com.au Status: Connecting to 113.20.1.106:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Error: Connection timed out Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of www.cairnsholidayhomes.com.au Status: Connecting to 113.20.1.106:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 1 of 50 allowed. Response: 220-Local time is now 18:36. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220 You will be disconnected after 15 minutes of inactivity. Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: Connection timed out Error: Could not connect to server

Autoupdate works fine except that it places the finished app in the Documents folder. From memory it indicates it will be in the Downloads folder, but really it would be preferable if it went directly into the Applications folder, but would then have to handle replacing the current version or keeping both

Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (46,249,54,133,138,49). Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

Recently updated FileZilla Client from version 3.9.0.6 to 3.10.0.2. After I updating FileZilla, I opened FileZilla, clicked on quick connect, selected an external ftp whose information I'd already stored, and got the following response:

Status: Resolving address of externalftp.gensler.com Status: Connecting to 138.208.5.15:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Error: GnuTLS error -15: An unexpected TLS packet was received. Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of externalftp.gensler.com Status: Connecting to 138.208.5.15:21... Status: Connection established, waiting for welcome message... Response: 220-Connected to Gensler External FTP ... Response: Response: Welcome to the Gensler FTP site. Information on this site is NOT BACKED UP. Files not accessed for 90 days will be automatically deleted. Response: Response: All transfers are logged with your host name and IP address. Use of this site is monitored and logged. Your use of this site constitutes consent to monitoring. Response: Response: Gensler makes no explicit or implied warranties on any files on our ftp servers. Your access to these files means that you understand this. Response: 220 Command: AUTH TLS Response: 234 AUTH command ok; starting SSL connection. Status: Initializing TLS... Error: GnuTLS error -15: An unexpected TLS packet was received. Error: Could not connect to server

Version: Client 3.10.0.2 Build information: Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknwn-linux-gnu Build date: 2015-01-16 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against wxWidgets: 3.0.3 GnuTLS: 3.2.20 SQLite: 3.8.7.2

Operating System Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

I have not experienced this error prior to the version 3.10.0. (I was previously using 3.9.0.6).

Running Filezilla Client 3.10.0.2:

Status: Resolving address of ftp.xxxxxxxxxxxxxxxx.com Status: Connecting to 192.xx.xx.xx:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Error: Connection timed out Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of ftp.virtualinstruments.com Status: Connecting to 192.xxx.xx.xx:21... Status: Connection established, waiting for welcome message... Response: 220 ftp.xxxxxxxxxxxxx.com X2 WS_FTP Server 7.5.1(58991250) Command: AUTH TLS Response: 234 SSL enabled and waiting for negotiation Status: Initializing TLS... Error: Connection timed out Error: Could not connect to server

Running Filezilla Client 3.10.0.2:

Status: Resolving address of ftp.xxxxxxxxxxxxxxxx.com Status: Connecting to 192.xx.xx.xx:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Error: Connection timed out Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of ftp.virtualinstruments.com Status: Connecting to 192.xxx.xx.xx:21... Status: Connection established, waiting for welcome message... Response: 220 ftp.xxxxxxxxxxxxx.com X2 WS_FTP Server 7.5.1(58991250) Command: AUTH TLS Response: 234 SSL enabled and waiting for negotiation Status: Initializing TLS... Error: Connection timed out Error: Could not connect to server

I cannot access the ftp site of my client after installing you
last 2 versions. I accept the security message and then I cannot
access the site any more.

see below log file of attempt:

Status: Resolving address of ftp2.europe.welocalize.com Status: Connecting to 185.5.242.181:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Connected Status: Retrieving directory listing... Status: Server sent passive reply with unroutable address. Using server address instead. Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing Status: Resolving address of ftp2.europe.welocalize.com Status: Connecting to 185.5.242.181:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Connected Trace: Measured latency of 516 ms Status: Retrieving directory listing... Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/" is the current directory Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: TYPE I Trace: CFtpControlSocket::OnReceive() Response: 200 Type Binary Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (10,9,8,60,43,13) Trace: CFtpControlSocket::TransferParseResponse() Status: Server sent passive reply with unroutable address. Using server address instead. Trace: Reply: 10.9.8.60, peer: 185.5.242.181 Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: MLSD Error: Connection timed out Trace: CFtpControlSocket::ResetOperation(2114) Trace: CControlSocket::ResetOperation(2114) Trace: CFtpControlSocket::ResetOperation(2114) Trace: CControlSocket::ResetOperation(2114) Error: Failed to retrieve directory listing

Since upgrade to version 3.10.0.2 connection to server times out. Failed to retrieve directory listing. All settings are correct as I'm using them with Smart FTP at this time.

Cannot connect to site that worked with previous version of FileZilla. Here is the message log (debug level 3):

Status: Resolving address of Status: Connecting to ... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Trace: Measured latency of 61 ms Status: Retrieving directory listing of "/"... Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: CWD / Trace: CFtpControlSocket::OnReceive() Response: 250 OK. Current directory is / Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/" is your current location Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: TYPE I Trace: CFtpControlSocket::OnReceive() Response: 200 TYPE is now 8-bit binary Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (64,31,54,152,164,161) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: MLSD Error: Connection timed out Trace: CFtpControlSocket::ResetOperation(2114) Trace: CControlSocket::ResetOperation(2114) Trace: CFtpControlSocket::ResetOperation(2114) Trace: CControlSocket::ResetOperation(2114) Error: Failed to retrieve directory listing

• - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

FileZilla Client

Version: 3.10.0.2

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-01-16 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.20 SQLite: 3.8.7.2

Operating system:

Name: Windows 8.1 (build 9600), 64-bit edition Version: 6.3 Platform: 64-bit system

I have noticed a problem when I move files from a workstation on the network server, the data transfer will stop frequently when there is no longer one second remaining. This arrest may take up to 90 seconds, but usually shorter period of Time. If I transfer files from the server to the workstation so the same problem does not exist. Why?

Client and server are on the same home network (192.168. ...) And the number of simultaneous users is not.

Running Server on Windows7, client of Linux Mint 16.

I once transferred files to and from c:/This/That directory.

Now when I reconnect Linux -> Windows the Windows file tree is 'stuck' at c:/This/That as the root (/) of what can be seen.

Entering the name of That's parent - ie This produces an error saying that This is not found as a subdirectory of That.

Using .. leaves me only at That, not This as I had hoped. Thanks for any and all advice and assistance. Cheers

Running FileZilla on a Win7 netbook with a screen resolution of 1024 x 600 is no problem. However, when checking for a software update, a new window pops up (indicating that a new version is available), but the buttons allowing to choose to install this update (or cancel) are not visible (should be at the bottom of the screen), and there is no way of navigating there (the window is taking up the full screen height already, but no scrollbar appears).

The local file listing takes about a second per item in the folder to show up when I browse "local" VPN folders. Filezilla is the only program that seems to have this problem browsing my VPN drives. When I browse local or LAN folders the speed is normal.

I just downloaded the latest version 3.10.0.2 and it wouldn't work. My ISP worked on the problem for a long while today and finally called to say that the new version doesn't authenticate with a PLESK Web host.

This is the error message:

Status: Resolving address of xxxxxxx.com Status: Connecting to 216.235.225.28:21... Status: Connection established, waiting for welcome message... Response: 220 ProFTPD 1.3.4c Server (ProFTPD) [216.235.225.28] Command: AUTH TLS Response: 234 AUTH TLS successful Status: Initializing TLS... Error: GnuTLS error -12: A TLS fatal alert has been received. Error: Could not connect to server

My system is:

FileZilla Client

Version: 3.10.0.2

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-01-16 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.20 SQLite: 3.8.7.2

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

when I try to connect to my ftp server, I receive a time out during the directory listing. Following is the session information:

Status: Resolving address of ftp.smith-home.info Status: Connecting to 185.28.23.25:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (185,28,23,25,57,3) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

Ftp server works fine with other software.

Barry

Processor: Intel Core I7 3770k 3.50GHz

Seems that there is an error in the last version 3.10.0.2

When there are 2 or more files to upload in queue, the first file is uploaded successful but the upload of second file and the others fail.

I tested upload the same files using other ftp client (Core FTP - ​http://www.coreftp.com/ ) and all files of queue where uploaded without error.

I attached a txt file of Filezilla log with the error message.

We uses a combination of KeePass and FileZilla to access our client FTPs so we cant just use site manager to configure the correct Encryption type.

A new command line switch that would allow us to choose the encryption(or plain ftp) would be useful.

Status: Connecting to 208.88.77.233:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current directory. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,88,77,233,4,9). Command: LIST Response: 534 Protection level negotiation failed. Error: Failed to retrieve directory listing

If I download the FileZilla version from the filezilla-project.org website (through Source Forge), that works fine on my computer. That is version is 3.9.0.6. However, when I install it I get a message saying that there's a new version (3.10.0.2). If I upgrade to 3.10.0.2, suddenly FileZilla times out after the MLSD command.

Here is the information I get when trying to use version 3.10.0.2 that results in a timeout:

Status: Resolving address of ftp.kgshultz.com Status: Connecting to 69.195.124.172:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (69,195,124,172,100,165) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

I did some searching around online and found lots of people saying that MLSD timeouts might be because there was a problem with my router. I tried logging on in several different locations with different routers, and I still have the same problem. Not to mention, it works fine using version 3.9.0.6.

I'm at a bit of a loss now and the only solution I've found is to stick with version 3.9.0.6. I'm nervous that there will be another upgrade (beyond 3.10.0.2) that will cause me the same problems, but I will no longer be able to download 3.9.0.6 from the website.

Every time I close FileZilla, I get "File 'C:\Users\Rich\AppData\Roaming\FileZilla\filezilla.xml~' couldn't be removed (error 0: the operation completed successfully.)"

It's mostly a nuisance, but it's unclear to me why this transpires, and error success seems like incorrect behavior.

I have uploaded to my server the following html file ​http://mapage.noos.fr/mecitoyen/france/ROUAGES/livre.htm When I then accessed it, either by Firefox or by Internet Explorer, it was displayed in what appeared to be chinese or japanese characters. In the source code, I noted that the original line-breaks had been replaced by a character represented by square with four tiny characters, in it.ⴀ䔀儀唀䤀 I downloaded the file back again, through Filezilla,onto my PC, and the result is like my original file except it dispolys line-breaks had been replaced by a character represented by a thin vertical rectangle.The source code contains the original french characters but with the squares: "acteurs de laഀ mondialisation" How can I eliminate that unwanted transformation ?(which I imagine is due to some kinf of compression, the file is 728K )

Hi

I'm using FZ version 3.10.0.2 on OSX Yosemite 10.10.1 (Screenshot of about page here if needed - ​http://puu.sh/eUSkv/3e8a32fc64.png ). FZ was installed today so as far as I can see this is the most recent official release I can use (and was an auto update).

Details of the issue

• Connect to remote server
• Search using the following details (changing 'custom_template' to the necessary name

As you can see, this correctly displays the list of files and directories containing the keywords. Note the directory is completely empty.

I then select all items, and right click -> download... with the following details and hit OK. I am then left with this structure locally Note the directory has been placed at the root, not in the catalog/view/theme/default/template/ directory

Not sure if it's related, but if I remove the "Filename" rule in the search, it doesn't find the empty directory. That may be intended, but thought it was worth noting. Please correct me if that's not the case

Thanks in advance Jay

I get this error message after closing Filezilla

Directory ... couldn't be deleted (error 66: Directory not empty) see attached screen shot

Doesn't make sense to me

Dear Sirs, During the last update I got a blue screen. Two more attempts to update resulted in further crashes. Dowloaded the update file from your site but same problems. Uninstalled Filezilla. Ran registry cleaner. Tried installing Filezilla - blue screen (twice). Seems the initial crash resulted in some damaged registry files which will need to be removed manually. Are you able to help? OS Windows7 x64 Many thanks, Sylvio www.lifestylephotography.co.uk

FileZilla Client

Version: 3.10.0.2

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-01-16 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.20 SQLite: 3.8.7.2

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

Hello, please bear with me, I am very much a newbie. I barely know how to upload files, but have been doing that through you for a while and all was going fine until recently when I updated my version of FileZilla. I keep getting error messages, such as "Failed to retrieve directory listing", and can't connect to my website(s)on my main computer. I called GoDaddy for help, and they thought it might be my browser or firewall, but nothing changed and I don't think that's it. Then I tried to upload via my laptop, which had an older version of FileZilla, and it worked fine. I asked my friend who told me about FileZilla a few years ago, and he suggested I report the issue, because maybe no one else has noticed it. I can't imagine that I'd be the only one, but don't know what else to do. Here is the message I've been getting: " Status: Connecting to 160.153.59.0:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (160,153,59,0,198,14) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing"

Can you help? Bear in mind it's hard for me to comprehend much of this at all. I hope I am using the proper protocol to ask for help. Thank you very much for your time and consideration. Steve

Since version 3.10.0, connections through SFTP always ignore any proxy settings I might have configured. 3.9.6 and older do not.

I've got it configured to use a HTTP proxy, over port 443. The "Bypass Proxy" setting for the connection I use is not checked.

The console shows the following lines (after enabling detailed output):

Response:	fzSftp started
Command:	proxy 1 "proxy.domain.com" 443
Command:	open "user@site.com" 2222

But then it actually does a direct connection instead. I confirmed this by looking at my firewall's network connections view, netstat, and by the fact that I'm no longer speed-limited by the proxy.

I've downgraded until the issue disappeared, and found that the proxy 3.9.6 and older versions do not have this issue.

I assume it's caused by the "Updated SFTP components from PuTTY" change introduced in 3.10.0-beta3, but I might be wrong.

The FileZilla installer ignores the user directory preference and always defaults the installation directory to the default directory.

If the program is already installed and to a user defined directory the installer should use the user defined directory by default.

Hello, within search function you have to select "does not contain" in order to find files that "conatin" specific characters within filenames.

therefore you have to select "contain" to find files that does not contain spoecific characters.

Regards Stefan

PS 3.10.0.2

Hi, I have noticed an issue with the file sizes on a remote server. Most of the files on the remote end have a size that's the real size of the file minus 4x1024^{3 (4gb). The files are fine on the remote SFTP server but the sizes displayed in FileZilla are wrong. Most of the files are between 4gb and 8gb in size.}

Here's some more information:

• Client: Windows 7 x64 with FileZilla 3.10.0.2 (latest)
• Server: RHEL6.6 server reached/browsed through SFTP.

I tried changing the server type from 'Default (Autodetect)' to 'Unix' but there was no noticeable difference. I also tried using the 'Raw listing' in the debug menu but to no avail.

This makes things a little wacky when resuming a transfer or calculating a transfer duration..

Please do not hesitate to contact me if there's need for extra info.

Regards,

Vincent

My New FileZilla version 3.10.0.2 every time asking for accept connection is secure while my server is already secure.

and file uploading is also slow in new version

Response: 234 AUTH TLS successful Status: Initializing TLS... Error: GnuTLS error -12: A TLS fatal alert has been received. Error: Could not connect to server

Could you copy IP address, username, password and port to fields after choosing a connection from a quick connection list? It would be useful, after program start, when connecting to many devices with same login, just different IP addresses.

Directory comparison and synchronised browsing are great features in Filezilla but the one thing that is missing is the ability to quickly do a diff between the server and the client versions of a file.

This feature could be implemented by downloading the server version into a temporary file and then doing a diff using whatever diffing utility that the user has installed (meld, winmerge, beyondcompare, etc..)

FileZilla would need some UI to allow the user to be able to select their diff tool of choice.

If the user then makes changes to the temporary file then FileZilla should offer to upload those changes to the server. To implement this, FileZilla would need to watch the process that was opened for the diff tool and wait till it closes.

The request and the reasoning is described in this forum article quite well.

​https://forum.filezilla-project.org/viewtopic.php?t=10824

I did a quick check and did not find any actual ticket for this issue.

I have a customer who owns a website that I take care of. When I updated to 3.10 today I got this popup that said the certification ticket was expired. I have never seen that in the 8 years I have been using FileZilla. I am attaching both the log and a png file of the popup itself.

I have a customer who owns a website that I take care of. When I updated to 3.10 today I got this popup that said the certification ticket was expired. I have never seen that in the 8 years I have been using FileZilla. I am attaching both the log and a png file of the popup itself.

FZ worked fine. When I accepted to install the upgrade I received the a.m. error message

Status: Connecting to 66.96.147.115:21... Status: Connection established, waiting for welcome message... Status: Insecure server, it does not support FTP over TLS. Status: Connected Status: Retrieving directory listing of "/schnieder-web/photos"... Command: CWD /schnieder-web/photos Response: 250 CWD command successful Command: PWD Response: 257 "/schnieder-web/photos" is the current directory Command: TYPE I Response: 200 Type set to I Command: PORT 192,168,178,27,192,43 Response: 200 PORT command successful Command: MLSD Response: 425 Unable to build data connection: Connection refused Error: Failed to retrieve directory listing Status: Sending keep-alive command

That's really it. At first, I just thought maybe something was wrong on the website. So to see, I just uninstalled the latest version (FileZilla_3.10.0.2_win32-setup.exe or whatever was the latest as of a day or two ago), and then reinstalled a previous version (which does not have the problem), which is:

FileZilla Client

Version: 3.8.0

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2014-03-28 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 3.2.12 SQLite: 3.7.16.2

Operating system:

Name: Windows NT 6.1 (build 7601, Service Pack 1) Version: 6.1 Platform: 64 bit system

Thanks! Roger

This is the error that is displayed:

Microsoft visual studio error message: Unhandled exception at 0x002567BD in filezilla.exe: 0xC0000005: Access violation reading location 0x00000000.

We are running filezilla 3.7.3 and we have a customer that keeps getting this error when he tries to store files. We have tried a number of things but it randomly crashes. After encountering the error, filezilla shuts down. This is transferring Windows files to Linux based storage system.

I did perform a search and found a similiar bug but not exactly like this one.

GnuTLS error -15: An unexpected TLS packet was received. Errore: Impossibile collegarsi al server

I can not put this site online. me error only on account ATTOLLO everything worked fine before the upgrade

Hello FZ team,

This latest build is not quite right. Have never had issues with anything before.

#1 - Constantly have to close and re-launch FileZilla to avoid "couldn't open filename.ext" errors when editing files locally.

#2 - When connecting to server fails there is no error message / indication. It just acts as if you never attempted to connect

Thanks for all you do, Thomas

Actually, if you have reinstalled your OS Win7/8/8.1 FZS isn't able to convert the stored values in FileZilla Server.xml to %appdata%/FileZilla Server/FileZilla Server Interface.xml

If I try to manually add the config the programm isn't able to read them correctly.

Beacuse an import/export function is currently missing I report this as an Bug with the highest priority which has to bef ixed in the next few day's!

I can't accept that a programm with stored config values in XML don't have an import/export function - this is the first thing/function which MUST BE ADDED!

Your FZC has this function but why is it not included in FZS?

Priority: CRITICAL!!! Solved until: Next few days!!!

How do I get the address to connect using Quick Connect?

Thanks

I have been seeing this for a number of FileZilla Client versions... kind of annoying.

It would be very helpful if the following features were available in FileZilla Client:

1. Being able to apply a style to edited files to visually indicated their edited state. For example, I would like to make those files show up with bold text. Ideally, this would apply to the corresponding remote files in the remote pane, also.

2. Being able to apply custom, user-specified styles (text/background color, bold/italic, etc.) to files by their file extension, or even better, using a filename pattern. (e.g., system*.log). Thus the file entries would show up in the local and remote panels with those styles.

3. Being able to specify a default style for files in the local and remote panels.

These would allow users to more quickly spot relevant files in a long list of files.

After upgrading to 3.10.1.1 experienced a problem with editing file with the same name. As far as I can see it's a know issue which should be fixed with this relase, but it is not.

"2015-02-01 - FileZilla Client 3.10.1.1 released Bugfixes and minor changes: Fix editing of files with the same name in different directories"

Downgrading to 3.10.0.2 fixed the issue.

Steps to reproduce:

• View/Edit folder1/file1.php
• View/Edit filder2/file1.php
• File has changed dialog appears even if it is not changed

Using editor Notepad++ (not upgraded recently)

I connect to a server, then establish a connection to a different server in a new tab.

(See screenshot 1.)

Instead of creating a new tab alongside the old one, it creates a new screen that overlays the old one, but is slightly smaller.

There is no way to switch between the two tabs.

(See screenshot 2.)

This has been a problem since FileZilla version 3.9.0.6. I am now using FileZilla version 3.10.1.1, and the problem remains.

Original forum discussion: ​https://forum.filezilla-project.org/viewtopic.php?f=2&t=34409

after installing update to v 3.10.1.1 i receive certificate notification on some of the servers I connect to. Once I hit ok to ignore the cert error, I am unable to connect to that server

after installing update to v 3.10.1.1 i receive certificate notification on some of the servers I connect to. Once I hit ok to ignore the cert error, I am unable to connect to that server

After updating this morning I got this error when using Quickconnect to a VM runing AIX 6.1. FileZilla version:FileZilla Client

Version: 3.10.1.1

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-02-01 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.21 SQLite: 3.8.8.2

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

Message log: Status: Resolving address of riaix61v1 Status: Connecting to 10.120.55.45:21... Status: Connection established, waiting for welcome message... Response: 220 riaix61v1 FTP server (Version 4.2 Mon Jun 11 13:04:13 CDT 2012) ready. Command: AUTH TLS Response: 234 Using authentication type TLSv1 Status: Initializing TLS... Error: GnuTLS error -15: An unexpected TLS packet was received. Error: Could not connect to server

The AIX is a VM on VIOS 2.2.2.1. Works fine with 3.9.0.5.

Hi, for about 3 months or more I have problem when I try drag&drop folder/file to my Explorer, so I have to download it to current local directory set in FileZilla :/ I am updating with releases continously, so FileZilla is reinstalled very often. I hope you could help me. Let me know if any logs/raports are needed. Greetings

after update v3.10.1.1 i cannot connect my servers problem is

Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: Connection timed out Error: Could not connect to server

after update v3.10.1.1 i cannot connect my servers problem is

Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: Connection timed out Error: Could not connect to server

after update v3.10.1.1 i cannot connect my servers problem is

Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: Connection timed out Error: Could not connect to server

we are using active directory and roaming profile, because of this %appdata% is
fileserver\appdata$\Administrator\AppData\Roaming

even the domain admin, which has a local admin rights on the machine where filezilla is runnign is giving

error writing xml file could not write
fileserver\appdata$\Administrator\AppData\Roaming\filezilla\filezilla.xml": failed to write xml file error

we don not have any problem with all the other software we use.

Repro:

1. Start a big file download.
2. Reboot the server to force the connection to drop. I used a Windows 2012 R2 IIS FTP site and rebooted the entire machine.
3. Observe, that the file transfer starts anew. This is a problem if the file takes a few days to download. A lot of progress is lost.

Note, that the typical dialog asking the user how to resolve a conflict (skip, overwrite, resume, ...) did not appear.

Desired behavior: Ask the user or simply resume the file download.

The Filezilla log showed the following during the connection outage:

Some earlier connection problem that apparently was resolved by restarting:

Command: RETR FILENAME Response: 150 Opening BINARY mode data connection. Response: 226 Transfer complete. Command: PASV Response: 227 Entering Passive Mode (IP,216,163). Command: REST 50930845561 Response: 350 Restarting at 50930845561. Command: RETR FILENAME Response: 150 Opening BINARY mode data connection. Error: Disconnected from server: ECONNABORTED - Connection aborted Error: File transfer failed after transferring 2 GB in 39888 seconds Status: Resolving address of HOSTNAME Status: Connecting to IP:PORT... Status: Connection established, waiting for welcome message... Status: Insecure server, it does not support FTP over TLS. Status: Connected Status: Starting download of PATH/FILENAME Status: Testing resume capabilities of server Command: TYPE I Response: 200 Type set to I. Command: PASV

... A few hours later the server reboot:

Command: RETR FILENAME Response: 150 Opening BINARY mode data connection. Error: Could not read from transfer socket: ECONNRESET - Connection reset by peer Error: Connection timed out Error: File transfer failed after transferring 8 GB in 3380 seconds Status: Resolving address of HOSTNAME Status: Connecting to IP:PORT... Error: Connection timed out Error: Could not connect to server Status: Delaying connection for 5 seconds due to previously failed connection attempt... Status: Resolving address of HOSTNAME Status: Connecting to IP:PORT... Error: Connection timed out

These messages were repeated a lot. Lots of retries. Now Filezilla gives up to restart:

Status: Connecting to IP:PORT... Status: Connection established, waiting for welcome message... Status: Insecure server, it does not support FTP over TLS. Status: Connected Status: Starting download of PATH/FILENAME Status: Testing resume capabilities of server Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (IP,192,4). Command: REST 162230556159 Response: 350 Restarting at 162230556159. Command: RETR FILENAME Response: 125 Data connection already open; Transfer starting. Response: 226 Transfer complete. Command: PASV Response: 227 Entering Passive Mode (IP,192,5). Command: REST 62409403658 Response: 350 Restarting at 62409403658. Command: RETR FILENAME Response: 150 Opening BINARY mode data connection. Error: Connection timed out Error: File transfer failed after transferring 93 MB in 35 seconds Status: Resolving address of HOSTNAME Status: Connecting to IP:PORT... Status: Connection established, waiting for welcome message... Status: Insecure server, it does not support FTP over TLS. Status: Connected Status: Starting download of PATH/FILENAME Status: Testing resume capabilities of server Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (IP,192,13). Command: REST 162230556159 Response: 350 Restarting at 162230556159. Command: RETR FILENAME Response: 150 Opening BINARY mode data connection. Error: Connection timed out Error: File transfer failed Status: Resolving address of HOSTNAME Status: Connecting to IP:PORT... Status: Connection established, waiting for welcome message... Status: Insecure server, it does not support FTP over TLS. Status: Connected Status: Starting download of PATH/FILENAME Command: CWD PATH Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (IP,192,14). Command: RETR FILENAME Error: Connection timed out Error: File transfer failed Status: Resolving address of HOSTNAME Status: Connecting to IP:PORT... Status: Connection established, waiting for welcome message... Status: Insecure server, it does not support FTP over TLS. Status: Connected Status: Starting download of PATH/FILENAME Command: CWD PATH Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (IP,192,15). Command: RETR FILENAME Response: 125 Data connection already open; Transfer starting. Error: Connection timed out Error: File transfer failed after transferring 4 MB in 12 seconds Status: Resolving address of HOSTNAME Status: Connecting to IP:PORT... Status: Connection established, waiting for welcome message... Status: Insecure server, it does not support FTP over TLS. Status: Connected Status: Starting download of PATH/FILENAME

Should be easy to repro. I have had this problem many times already.

Sometimes, sleeping the client machine at night and resuming it in the morning also causes this issue.

Version: 3.10.02. Has been happening for a long time, though. Nothing new.

My local macports repo build of FileZilla broke between 3.10.0.2 and 3.10.1.1. The build broke on tlssocket.h being included in a couple of files because ECONNABORTED was not defined. This broke in r6382.

Attached is a patch to include errno.h so that it is defined.