Custom Query (4044 matches)

Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing...

Loggin in hangs at this point. Looks like people are saying to change an FTP setting in site manager, and that works, but I want to be able to access my 2 sites the old way -- using the quick connect bar.

If this can't be resolved quickly, how can I download the previous working version (people are complaining about the last TWO updates).

Thanks, Jason

What do I change in settings to make it work again?

Since upgrade to version 3.10.0.2 connection to server times out. Failed to retrieve directory listing. All settings are correct as I'm using them with Smart FTP at this time.

Cannot connect to site that worked with previous version of FileZilla. Here is the message log (debug level 3):

Status: Resolving address of Status: Connecting to ... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Trace: Measured latency of 61 ms Status: Retrieving directory listing of "/"... Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: CWD / Trace: CFtpControlSocket::OnReceive() Response: 250 OK. Current directory is / Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/" is your current location Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: TYPE I Trace: CFtpControlSocket::OnReceive() Response: 200 TYPE is now 8-bit binary Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (64,31,54,152,164,161) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: MLSD Error: Connection timed out Trace: CFtpControlSocket::ResetOperation(2114) Trace: CControlSocket::ResetOperation(2114) Trace: CFtpControlSocket::ResetOperation(2114) Trace: CControlSocket::ResetOperation(2114) Error: Failed to retrieve directory listing

• - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

FileZilla Client

Version: 3.10.0.2

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-01-16 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.20 SQLite: 3.8.7.2

Operating system:

Name: Windows 8.1 (build 9600), 64-bit edition Version: 6.3 Platform: 64-bit system

I have noticed a problem when I move files from a workstation on the network server, the data transfer will stop frequently when there is no longer one second remaining. This arrest may take up to 90 seconds, but usually shorter period of Time. If I transfer files from the server to the workstation so the same problem does not exist. Why?

Client and server are on the same home network (192.168. ...) And the number of simultaneous users is not.

Like others since upgrading to version 3.10.0.2 my connection to server times out. Failed to retrieve directory listing. All settings are correct as I'm using them with Smart FTP at this time. I still have the previous version on my home computer and it works fine.

Before this versions, everything was ok during a year.

Now (IP and domain mangled):

Status: Resolving address of ....net Status: Connecting to 77.77.77.77:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 2 of 50 allowed. Response: 220-Local time is now 16:06. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: AUTH TLS Error: Connection timed out Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of ....net Status: Connecting to 77.77.77.77:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 3 of 50 allowed. Response: 220-Local time is now 16:06. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: AUTH TLS Error: Connection timed out Error: Could not connect to server

Status: Resolving address of didar93.com Status: Connecting to 158.58.186.227:4916... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Error: GnuTLS error -12: A TLS fatal alert has been received. Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of didar93.com Status: Connecting to 158.58.186.227:4916... Status: Connection established, waiting for welcome message... Response: 220 ProFTPD 1.3.5 Server ready. Command: AUTH TLS Response: 234 AUTH TLS successful Status: Initializing TLS... Error: GnuTLS error -12: A TLS fatal alert has been received. Error: Could not connect to server

The local file listing takes about a second per item in the folder to show up when I browse "local" VPN folders. Filezilla is the only program that seems to have this problem browsing my VPN drives. When I browse local or LAN folders the speed is normal.

When I try to connect to my hosting, tries connect and then disconnect me and does not show the file list.

Status: Resolving address xxxxxxxxxxxxxxxxxxxx.xxx Status: Connecting to xxx.xxx.xxx.xxx:21 ... Status: Connection established, waiting for welcome message ... Status: Initializing TLS ... Status: Verifying certificate ... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Online Status: Retrieving directory listing ... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (108,61,29,155,37,151) Command: MLSD Error: Connection timed wait Error: Failed to retrieve directory listing Status: Resolving address xxxxxxxxxxxxxxxxxxxx.xxx Status: Connecting to xxx.xxx.xxx.xxx:21 ... Status: Connection established, waiting for welcome message ... Status: Initializing TLS ... Status: Verifying certificate ... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Online Status: Retrieving directory listing ... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (108,61,29,155,218,184) Command: MLSD Error: Connection timed wait Error: Failed to retrieve directory listing

I made the mistake of upgrading the FileZilla client this morning and now I get nothing but errors when attempting to connect to my server and upload files. I get certificate warnings when I connect to the server. I get recurring "421 too many connections..." error messages, followed by "Could not connect to the server". When I can get connected, the process of getting a directory listing from the server is incredibly slow. If I do get a listing, then attempting to upload a file goes nowhere. None of these things was a problem yesterday. So, thanks.

I just downloaded the latest version 3.10.0.2 and it wouldn't work. My ISP worked on the problem for a long while today and finally called to say that the new version doesn't authenticate with a PLESK Web host.

This is the error message:

Status: Resolving address of xxxxxxx.com Status: Connecting to 216.235.225.28:21... Status: Connection established, waiting for welcome message... Response: 220 ProFTPD 1.3.4c Server (ProFTPD) [216.235.225.28] Command: AUTH TLS Response: 234 AUTH TLS successful Status: Initializing TLS... Error: GnuTLS error -12: A TLS fatal alert has been received. Error: Could not connect to server

Just accepted the auto update to version 3.10.0.2 Now can not connect to any of my sites. Error is shown below. Was this version properly tested properly before release?

I get a pop up about an unknown certificate. Then I get: Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (n,n,n,n,n) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

Will try and re install previous version.

Failed to retrieve directory listing when connecting to my Synology. Version:3.9.0.6 is the last working fine version.

Processor: Intel Core I7 3770k 3.50GHz

Seems that there is an error in the last version 3.10.0.2

When there are 2 or more files to upload in queue, the first file is uploaded successful but the upload of second file and the others fail.

I tested upload the same files using other ftp client (Core FTP - ​http://www.coreftp.com/ ) and all files of queue where uploaded without error.

I attached a txt file of Filezilla log with the error message.

Hi,

I have been unable to connect to my usual servers after I updated FileZilla yesterday. It was working fine before the update.

Error message: Connection timed out ... Could not connect to server.

I ran tracer command to see if I could reach the server — and I could. So it's not a machine or external connectivity issue.

Furthermore, I could reach the server and do normal upload functions via FireFTP, which is not my first choice. I definitely prefer FileZilla.

Thanks.

Anu

Status: Connecting to 208.88.77.233:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current directory. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,88,77,233,4,9). Command: LIST Response: 534 Protection level negotiation failed. Error: Failed to retrieve directory listing

I have uploaded to my server the following html file ​http://mapage.noos.fr/mecitoyen/france/ROUAGES/livre.htm When I then accessed it, either by Firefox or by Internet Explorer, it was displayed in what appeared to be chinese or japanese characters. In the source code, I noted that the original line-breaks had been replaced by a character represented by square with four tiny characters, in it.ⴀ䔀儀唀䤀 I downloaded the file back again, through Filezilla,onto my PC, and the result is like my original file except it dispolys line-breaks had been replaced by a character represented by a thin vertical rectangle.The source code contains the original french characters but with the squares: "acteurs de laഀ mondialisation" How can I eliminate that unwanted transformation ?(which I imagine is due to some kinf of compression, the file is 728K )

Dear Sirs, During the last update I got a blue screen. Two more attempts to update resulted in further crashes. Dowloaded the update file from your site but same problems. Uninstalled Filezilla. Ran registry cleaner. Tried installing Filezilla - blue screen (twice). Seems the initial crash resulted in some damaged registry files which will need to be removed manually. Are you able to help? OS Windows7 x64 Many thanks, Sylvio www.lifestylephotography.co.uk

I recently downgraded to the newest version 3.10.0.2 and now I can no longer connect to my website.

Here is what happens when trying to connect:

Status: Resolving address of ftp.noblecontrols.com Status: Connecting to 173.254.28.18:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (173,254,28,18,176,83) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

Here is the version Information: FileZilla Client

Version: 3.10.0.2

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-01-16 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.20 SQLite: 3.8.7.2

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

FileZilla Client

Version: 3.10.0.2

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-01-16 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.20 SQLite: 3.8.7.2

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

Hello, please bear with me, I am very much a newbie. I barely know how to upload files, but have been doing that through you for a while and all was going fine until recently when I updated my version of FileZilla. I keep getting error messages, such as "Failed to retrieve directory listing", and can't connect to my website(s)on my main computer. I called GoDaddy for help, and they thought it might be my browser or firewall, but nothing changed and I don't think that's it. Then I tried to upload via my laptop, which had an older version of FileZilla, and it worked fine. I asked my friend who told me about FileZilla a few years ago, and he suggested I report the issue, because maybe no one else has noticed it. I can't imagine that I'd be the only one, but don't know what else to do. Here is the message I've been getting: " Status: Connecting to 160.153.59.0:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (160,153,59,0,198,14) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing"

Can you help? Bear in mind it's hard for me to comprehend much of this at all. I hope I am using the proper protocol to ask for help. Thank you very much for your time and consideration. Steve

Since version 3.10.0, connections through SFTP always ignore any proxy settings I might have configured. 3.9.6 and older do not.

I've got it configured to use a HTTP proxy, over port 443. The "Bypass Proxy" setting for the connection I use is not checked.

The console shows the following lines (after enabling detailed output):

Response:	fzSftp started
Command:	proxy 1 "proxy.domain.com" 443
Command:	open "user@site.com" 2222

But then it actually does a direct connection instead. I confirmed this by looking at my firewall's network connections view, netstat, and by the fact that I'm no longer speed-limited by the proxy.

I've downgraded until the issue disappeared, and found that the proxy 3.9.6 and older versions do not have this issue.

I assume it's caused by the "Updated SFTP components from PuTTY" change introduced in 3.10.0-beta3, but I might be wrong.

Hello, within search function you have to select "does not contain" in order to find files that "conatin" specific characters within filenames.

therefore you have to select "contain" to find files that does not contain spoecific characters.

Regards Stefan

PS 3.10.0.2

Hi, I have noticed an issue with the file sizes on a remote server. Most of the files on the remote end have a size that's the real size of the file minus 4x1024^{3 (4gb). The files are fine on the remote SFTP server but the sizes displayed in FileZilla are wrong. Most of the files are between 4gb and 8gb in size.}

Here's some more information:

• Client: Windows 7 x64 with FileZilla 3.10.0.2 (latest)
• Server: RHEL6.6 server reached/browsed through SFTP.

I tried changing the server type from 'Default (Autodetect)' to 'Unix' but there was no noticeable difference. I also tried using the 'Raw listing' in the debug menu but to no avail.

This makes things a little wacky when resuming a transfer or calculating a transfer duration..

Please do not hesitate to contact me if there's need for extra info.

Regards,

Vincent

My New FileZilla version 3.10.0.2 every time asking for accept connection is secure while my server is already secure.

and file uploading is also slow in new version

Response: 234 AUTH TLS successful Status: Initializing TLS... Error: GnuTLS error -12: A TLS fatal alert has been received. Error: Could not connect to server

I have a customer who owns a website that I take care of. When I updated to 3.10 today I got this popup that said the certification ticket was expired. I have never seen that in the 8 years I have been using FileZilla. I am attaching both the log and a png file of the popup itself.

I have a customer who owns a website that I take care of. When I updated to 3.10 today I got this popup that said the certification ticket was expired. I have never seen that in the 8 years I have been using FileZilla. I am attaching both the log and a png file of the popup itself.

That's really it. At first, I just thought maybe something was wrong on the website. So to see, I just uninstalled the latest version (FileZilla_3.10.0.2_win32-setup.exe or whatever was the latest as of a day or two ago), and then reinstalled a previous version (which does not have the problem), which is:

FileZilla Client

Version: 3.8.0

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2014-03-28 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 3.2.12 SQLite: 3.7.16.2

Operating system:

Name: Windows NT 6.1 (build 7601, Service Pack 1) Version: 6.1 Platform: 64 bit system

Thanks! Roger

This is the error that is displayed:

Microsoft visual studio error message: Unhandled exception at 0x002567BD in filezilla.exe: 0xC0000005: Access violation reading location 0x00000000.

We are running filezilla 3.7.3 and we have a customer that keeps getting this error when he tries to store files. We have tried a number of things but it randomly crashes. After encountering the error, filezilla shuts down. This is transferring Windows files to Linux based storage system.

I did perform a search and found a similiar bug but not exactly like this one.

Have been using FileZilla. FTP had been working fine. Perhaps last update of FileZilla changed something – They updated yesterday. It does connect, and I do get the file listing at the Remote site. However:

During a file update (upload) I get a message: Response: 150 Opening ASCII mode data connection. Response: 550 The supplied message is incomplete. The signature was not verified. Error: File transfer failed

• If the file to be updated is already at the Remote Site, I will have seen something happening at the Remote Site view of FileZila, then the target file disappears.

• Now if the target file of that name is not there, if I try again, it does upload the desired file … keep in mind, however, that I still get that error message.

This is true with other hosts I am using also.

My webhost website has an alternative, Cyberduck, and the update worked with that, but... I strongly prefer FileZilla interface.

Here is the error message:

ommand: TYPE A Response: 200 Type set to A. Command: PASV Response: 227 Entering Passive Mode (216,250,122,86,248,79). Command: STOR schedule.htm Response: 150 Opening ASCII mode data connection. Response: 550 The supplied message is incomplete. The signature was not verified. Error: File transfer failed

Here is the FileZilla info:

FileZilla Client

Version: 3.10.0.2

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-01-16 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.20 SQLite: 3.8.7.2

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

Hello FZ team,

This latest build is not quite right. Have never had issues with anything before.

#1 - Constantly have to close and re-launch FileZilla to avoid "couldn't open filename.ext" errors when editing files locally.

#2 - When connecting to server fails there is no error message / indication. It just acts as if you never attempted to connect

Thanks for all you do, Thomas

On new FileZilla_3.10.1, there is a temp files corruption problem with editing 2 files with same name.

I edit myftp/include/myfile.php I edit myftp/anotherpath/anotherfolder/myfile.php

Filezilla take my second file for my first file and see my first file as modified and ask me to update it on server ...

At the end result myftp/anotherpath/anotherfolder/myfiles.php = myftp/include/myfiles.php

This problem is not present in FileZilla 3.10.0.2 and previous ...

Myfile.php is open as temp file Myfile.php and /anotherfolder/Myfile.php as Myfile2.php

I have been seeing this for a number of FileZilla Client versions... kind of annoying.

First I connect to the server with the client and it is fast and no problems. I open the folders on server and on my pc so I can make a transfer. I doubleclick to transfer a file, and it reacts allright, but then it reports an error and for a slight second I can see the file in the list on the serverfolder and then it disappears. So instead of updating the file on the server the file is now missing!!!! I tried several times. This occured just after upgrading the client on automatic suggestion. Which I have done before without problems. Now this is extra annoying as it is the last thing I wanted to do before going on a travel tomorrow morning. And now instead of having an updated website I have a website with 2 missing files. Here is a copy of the report:

Status: Resolving address of s219191705.onlinehome.fr Status: Connecting to 82.165.174.120:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Connected Status: Retrieving directory listing... Status: Calculating timezone offset of server... Status: Timezone offsets: Server: 3600 seconds. Local: 3600 seconds. Difference: 0 seconds. Status: Directory listing of "/u46581113" successful Status: Resolving address of s219191705.onlinehome.fr Status: Connecting to 82.165.174.120:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Connected Status: Starting upload of E:\Hallon\Hemsidor\Brocante Albinque\sieges.htm Command: CWD /u46581113 Response: 250 CWD command successful. Command: PWD Response: 257 "/u46581113" is current directory. Command: TYPE A Response: 200 Type set to A. Command: PASV Response: 227 Entering Passive Mode (82,165,174,120,202,118). Command: STOR sieges.htm Response: 150 Opening ASCII mode data connection. Response: 550 The supplied message is incomplete. The signature was not verified. Error: File transfer failed Status: Starting upload of E:\Hallon\Hemsidor\Brocante Albinque\sieges.htm Status: Retrieving directory listing of "/u46581113"... Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (82,165,174,120,202,122). Command: LIST Response: 150 Opening BINARY mode data connection. Response: 226 Transfer complete. Command: TYPE A Response: 200 Type set to A. Command: PASV Response: 227 Entering Passive Mode (82,165,174,120,202,123). Command: STOR sieges.htm Response: 150 Opening ASCII mode data connection. Response: 550 The supplied message is incomplete. The signature was not verified. Error: File transfer failed Status: Starting upload of E:\Hallon\Hemsidor\Brocante Albinque\sieges.htm Status: Retrieving directory listing of "/u46581113"... Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (82,165,174,120,202,133). Command: LIST Response: 150 Opening BINARY mode data connection. Response: 226 Transfer complete. Command: TYPE A Response: 200 Type set to A. Command: PASV Response: 227 Entering Passive Mode (82,165,174,120,202,135). Command: STOR sieges.htm Response: 150 Opening ASCII mode data connection. Response: 550 The supplied message is incomplete. The signature was not verified. Error: File transfer failed Status: Retrieving directory listing of "/u46581113"... Status: Directory listing of "/u46581113" successful

After upgrading to 3.10.1.1 experienced a problem with editing file with the same name. As far as I can see it's a know issue which should be fixed with this relase, but it is not.

"2015-02-01 - FileZilla Client 3.10.1.1 released Bugfixes and minor changes: Fix editing of files with the same name in different directories"

Downgrading to 3.10.0.2 fixed the issue.

Steps to reproduce:

• View/Edit folder1/file1.php
• View/Edit filder2/file1.php
• File has changed dialog appears even if it is not changed

Using editor Notepad++ (not upgraded recently)

I have Filezilla 3.10.1.1 When I try to connect to some server appear this message:

Status: Resolving address of server02.4more.it Status: Connecting to 46.16.88.36:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (46,16,88,36,105,69) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

This error appear for EVERY server... But when i try to connect with Filezilla 3.9.0.6 nothing error appear and i can work in FTP.... WHY?!

after installing update to v 3.10.1.1 i receive certificate notification on some of the servers I connect to. Once I hit ok to ignore the cert error, I am unable to connect to that server

after installing update to v 3.10.1.1 i receive certificate notification on some of the servers I connect to. Once I hit ok to ignore the cert error, I am unable to connect to that server

I have just installed Filezilla 3.10.1.1

When I try to connect to a server I get a Certificate notification

and then I am unable to remain connected to the server.

Server messages: Status: Connecting to 154.42.65.15:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing of "/"... Command: CWD / Response: 250 OK. Current directory is / Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (154,42,65,15,71,37) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

This happens every time.

Your new version update is giving me ERROR messages.

FILEZILLA DETAILS

FileZilla Client

Version: 3.10.1.1

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-02-01 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.21 SQLite: 3.8.8.2

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

_

FIRST ATTEMPT TO LOGIN

Status: Resolving address of www.ekamcentre.com Status: Connecting to 210.48.154.8:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 1 of 50 allowed. Response: 220-Local time is now 10:37. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: AUTH TLS Error: Connection timed out Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of www.ekamcentre.com Status: Connecting to 210.48.154.8:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 1 of 50 allowed. Response: 220-Local time is now 10:37. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: AUTH TLS Error: Could not connect to server

_

SECOND ATTEMPT TO LOGIN

Status: Resolving address of www.ekamcentre.com Status: Connection attempt failed with "EAI_NODATA - No address associated with nodename". Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of www.ekamcentre.com Status: Connection attempt failed with "EAI_NODATA - No address associated with nodename".

After updating this morning I got this error when using Quickconnect to a VM runing AIX 6.1. FileZilla version:FileZilla Client

Version: 3.10.1.1

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-02-01 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.21 SQLite: 3.8.8.2

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

Message log: Status: Resolving address of riaix61v1 Status: Connecting to 10.120.55.45:21... Status: Connection established, waiting for welcome message... Response: 220 riaix61v1 FTP server (Version 4.2 Mon Jun 11 13:04:13 CDT 2012) ready. Command: AUTH TLS Response: 234 Using authentication type TLSv1 Status: Initializing TLS... Error: GnuTLS error -15: An unexpected TLS packet was received. Error: Could not connect to server

The AIX is a VM on VIOS 2.2.2.1. Works fine with 3.9.0.5.

Hi, for about 3 months or more I have problem when I try drag&drop folder/file to my Explorer, so I have to download it to current local directory set in FileZilla :/ I am updating with releases continously, so FileZilla is reinstalled very often. I hope you could help me. Let me know if any logs/raports are needed. Greetings

after update v3.10.1.1 i cannot connect my servers problem is

Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: Connection timed out Error: Could not connect to server

after update v3.10.1.1 i cannot connect my servers problem is

Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: Connection timed out Error: Could not connect to server

we are using active directory and roaming profile, because of this %appdata% is
fileserver\appdata$\Administrator\AppData\Roaming

even the domain admin, which has a local admin rights on the machine where filezilla is runnign is giving

error writing xml file could not write
fileserver\appdata$\Administrator\AppData\Roaming\filezilla\filezilla.xml": failed to write xml file error

we don not have any problem with all the other software we use.

Repro:

1. Start a big file download.
2. Reboot the server to force the connection to drop. I used a Windows 2012 R2 IIS FTP site and rebooted the entire machine.
3. Observe, that the file transfer starts anew. This is a problem if the file takes a few days to download. A lot of progress is lost.

Note, that the typical dialog asking the user how to resolve a conflict (skip, overwrite, resume, ...) did not appear.

Desired behavior: Ask the user or simply resume the file download.

The Filezilla log showed the following during the connection outage:

Some earlier connection problem that apparently was resolved by restarting:

Command: RETR FILENAME Response: 150 Opening BINARY mode data connection. Response: 226 Transfer complete. Command: PASV Response: 227 Entering Passive Mode (IP,216,163). Command: REST 50930845561 Response: 350 Restarting at 50930845561. Command: RETR FILENAME Response: 150 Opening BINARY mode data connection. Error: Disconnected from server: ECONNABORTED - Connection aborted Error: File transfer failed after transferring 2 GB in 39888 seconds Status: Resolving address of HOSTNAME Status: Connecting to IP:PORT... Status: Connection established, waiting for welcome message... Status: Insecure server, it does not support FTP over TLS. Status: Connected Status: Starting download of PATH/FILENAME Status: Testing resume capabilities of server Command: TYPE I Response: 200 Type set to I. Command: PASV

... A few hours later the server reboot:

Command: RETR FILENAME Response: 150 Opening BINARY mode data connection. Error: Could not read from transfer socket: ECONNRESET - Connection reset by peer Error: Connection timed out Error: File transfer failed after transferring 8 GB in 3380 seconds Status: Resolving address of HOSTNAME Status: Connecting to IP:PORT... Error: Connection timed out Error: Could not connect to server Status: Delaying connection for 5 seconds due to previously failed connection attempt... Status: Resolving address of HOSTNAME Status: Connecting to IP:PORT... Error: Connection timed out

These messages were repeated a lot. Lots of retries. Now Filezilla gives up to restart:

Status: Connecting to IP:PORT... Status: Connection established, waiting for welcome message... Status: Insecure server, it does not support FTP over TLS. Status: Connected Status: Starting download of PATH/FILENAME Status: Testing resume capabilities of server Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (IP,192,4). Command: REST 162230556159 Response: 350 Restarting at 162230556159. Command: RETR FILENAME Response: 125 Data connection already open; Transfer starting. Response: 226 Transfer complete. Command: PASV Response: 227 Entering Passive Mode (IP,192,5). Command: REST 62409403658 Response: 350 Restarting at 62409403658. Command: RETR FILENAME Response: 150 Opening BINARY mode data connection. Error: Connection timed out Error: File transfer failed after transferring 93 MB in 35 seconds Status: Resolving address of HOSTNAME Status: Connecting to IP:PORT... Status: Connection established, waiting for welcome message... Status: Insecure server, it does not support FTP over TLS. Status: Connected Status: Starting download of PATH/FILENAME Status: Testing resume capabilities of server Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (IP,192,13). Command: REST 162230556159 Response: 350 Restarting at 162230556159. Command: RETR FILENAME Response: 150 Opening BINARY mode data connection. Error: Connection timed out Error: File transfer failed Status: Resolving address of HOSTNAME Status: Connecting to IP:PORT... Status: Connection established, waiting for welcome message... Status: Insecure server, it does not support FTP over TLS. Status: Connected Status: Starting download of PATH/FILENAME Command: CWD PATH Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (IP,192,14). Command: RETR FILENAME Error: Connection timed out Error: File transfer failed Status: Resolving address of HOSTNAME Status: Connecting to IP:PORT... Status: Connection established, waiting for welcome message... Status: Insecure server, it does not support FTP over TLS. Status: Connected Status: Starting download of PATH/FILENAME Command: CWD PATH Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (IP,192,15). Command: RETR FILENAME Response: 125 Data connection already open; Transfer starting. Error: Connection timed out Error: File transfer failed after transferring 4 MB in 12 seconds Status: Resolving address of HOSTNAME Status: Connecting to IP:PORT... Status: Connection established, waiting for welcome message... Status: Insecure server, it does not support FTP over TLS. Status: Connected Status: Starting download of PATH/FILENAME

Should be easy to repro. I have had this problem many times already.

Sometimes, sleeping the client machine at night and resuming it in the morning also causes this issue.

Version: 3.10.02. Has been happening for a long time, though. Nothing new.

Hello. I got an update recently which messed up my secure FTP functionality. As such, I installed the previous version of Filezilla client (btw, with one slip of the finger I was "rewarded" with extra software that was extremely annoying and was quite difficult to fully uninstall, nearly malware. I guess that's how Sourceforge rolls now, probably not your fault.)

Anyway...because of the above, I tried the feature where in Settings... Updates you can choose "Never". This apparently doesn't work. Now I'm nagged every single time I use the program. And yes, I already know that there was some fix that deals with secure connections, so I might try my luck and see if the program works again for secure stuff.

So I'd call it non-urgent priority, even though it's super annoying. :)

Thanks for your help.

Ever since that last 2 updates I've been unable to connect to any remove hosts. I keep getting similar failures. For some reason it times out retrieve the directories. I've tried 2 other FTP clients and they resolve with no issue.

Status: Resolving address of ftp.spierce-1.bluehoststaff.com Status: Connecting to 50.87.230.172:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (50,87,230,172,218,171) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

Hi We have a few clients that receive the message "Failed to load SSL libraries" when trying to connect to our FileZilla Server. Our Users are currently running FileZilla 3.10.1.1 and our FileZilla Server version is 0.9.43. We understand that there are newer versions of the FileZilla Server, but since this server is in production we do not want upgrade (which will affect other clients) until we know for sure other that it will address this issue. Other Technical information about this issue is:

We have currently set up the Server to use FTPS on Port 990. The Server Certificate is a FileZilla generated cert using TLS 1.2 On the Server when the connection fails we can see a message in the log: "431 Could not initialize SSL connection"

The clients are set to use: Protocol: FTP- File Transfer Protocal Encryption: Require implicit FTP over TLS Logon Type: Normal

Additional information can be provided. ANY help with this issue will be greatly appreciated! Good Day, Chris K

Directory listing worked before on this site. Works from command line ftp. FileZilla Client

Version: 3.10.1.1

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-02-01 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.21 SQLite: 3.8.8.2

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

Log: Status: Resolving address of ftp.kotan.com Status: Connecting to 50.31.3.169:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (50,31,3,169,138,83) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

Directory listing worked before on this site. Works from command line ftp. FileZilla Client

Version: 3.10.1.1

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-02-01 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.21 SQLite: 3.8.8.2

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

Log: Status: Resolving address of ftp.kotan.com Status: Connecting to 50.31.3.169:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (50,31,3,169,138,83) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

Directory listing worked before on this site. Works from command line ftp. FileZilla Client

Version: 3.10.1.1

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-02-01 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.21 SQLite: 3.8.8.2

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

Log: Status: Resolving address of ftp.kotan.com Status: Connecting to 50.31.3.169:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (50,31,3,169,138,83) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

Directory listing worked before on this site. Works from command line ftp. FileZilla Client

Version: 3.10.1.1

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-02-01 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.21 SQLite: 3.8.8.2

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

Log: Status: Resolving address of ftp.kotan.com Status: Connecting to 50.31.3.169:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (50,31,3,169,138,83) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

Directory listing worked before on this site. Works from command line ftp. FileZilla Client

Version: 3.10.1.1

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-02-01 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.21 SQLite: 3.8.8.2

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

Log: Status: Resolving address of ftp.kotan.com Status: Connecting to 50.31.3.169:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (50,31,3,169,138,83) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

Directory listing worked before on this site. Works from command line ftp. FileZilla Client

Version: 3.10.1.1

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-02-01 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.21 SQLite: 3.8.8.2

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

Log: Status: Resolving address of ftp.kotan.com Status: Connecting to 50.31.3.169:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (50,31,3,169,138,83) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

Several times with all version of FZ I have encountered messages saying the source file already exists in an otherwise empty directory I am populating.

Searching the source for duplicates does not produce any. This most usually happens with very large uploads (3000 or more files) The timestamp on the source file is always older than the destination one. My solution has been to set "overwrite if source is newer which leaves the original transfer alone but the problem for me is it often takes hours to do this and sometimes it is next day before I find the message. FZ version 1.10.11 also shows occasional failed transfers :Could not start transfer.

Problems uploading since new version of FZ updated Insecure server messages never had before, files don't load or fail. I had an older version of FZ on another PC and it is fine. Also more stable when dragging and dropping files, new version skips down remote directory files

I have not been able to access this server with the updated versions of FileZilla - I have asked host and they agree that certificate is there and is correct and in date etc and therefore I should be able to access via TLS and thus a filezilla bug (?)

my version and details

FileZilla Client
----------------

Version:          3.10.1.1

Build information:
  Compiled for:   i686-w64-mingw32
  Compiled on:    x86_64-unknown-linux-gnu
  Build date:     2015-02-01
  Compiled with:  i686-w64-mingw32-gcc (GCC) 4.9.1
  Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:
  wxWidgets:      3.0.3
  GnuTLS:         3.2.21
  SQLite:         3.8.8.2

Operating system:
  Name:           Windows 7 (build 7601, Service Pack 1)
  Version:        6.1
  Platform:       32-bit system

and debug log report - I have to abort it as it sits there and does nothing!

DEBUG

Error:	Directory listing aborted by user
Status:	Resolving address of ftp.websq.uk
Status:	Connecting to 185.52.24.183:21...
Status:	Connection established, waiting for welcome message...
Status:	Initializing TLS...
Status:	Verifying certificate...
Status:	TLS connection established.
Status:	Server does not support non-ASCII characters.
Status:	Connected
Status:	Retrieving directory listing...
Status:	Disconnected from server
Command:	PWD
Response:	257 "/" is your current location
Command:	TYPE I
Response:	200 TYPE is now 8-bit binary
Command:	PASV
Response:	227 Entering Passive Mode (185,52,24,183,85,246)
Command:	MLSD
Error:	Directory listing aborted by user

I can only access via unsecure route which I would rather not

Thank you Sarah

Since updating FileZilla Client from v3.10.0.2 to v3.10.1.1, when FileZilla prompts for my 'Unknown certificate' it no longer shows the checkbox for 'Always trust certificate for future sessions'.

Certificate is within the Validity period and host address matches the SAN. This is self-signed, with many SAN entries to cover all accessible hostnames the FTP is accessed from internally and externally.

I can only assume because of the number of SAN in the list, it pushes the checkbox off screen, and doesn't have anything to do with any problem or expiration of the certificate.

Only other issues I found similar to this were expired certificates where the checkbox was visible, but not selectable.

For me, it's not even visible.

Unable to install Filezilla (tried 3.10.1.1 or 3.9.0.6) on my desktop. Getting ....win32-setup.exe is not a valid Win32 application. Help will be appreciated.

I get a virus alert from Norton when I try to download either the client or the server file.

After updating this morning, the new version failed to login on my Server. Restoring the system - and everything worked perfectly - with the old version 3.9.0.2

When I attempt to install the client v3.10.1.1 I receive the following error and the installation fails:

"Product Configuration is Missing"

How do I resolve this issue

I just upgraded to the current version today and now I can't communicate with the FTP service. Here is the command line summary:

Status: Resolving address of rjwagner49.com Status: Connecting to 74.220.207.135:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (74,220,207,135,73,188) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

I made no changes to the log-in information, but now it won't get the directory listing.

Description of problem:

Upload of folders: FileZilla creates the list of files (to be uploaded) and starts uploading the first one. When 100% ready, then it starts with the same file from the beginning.

Upgraded and now get the error "Failed to retrieve directory listing" from MediaTemple servers. Most others I get the same error but I have one that will work.

Something has changed with the update I did today. Another machine that I did NOT upgrade FZ on is working fine.

Status: Resolving address of www.killeringenuity.com Status: Connecting to 70.32.68.105:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (70,32,68,105,234,27) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

After upgrading to version 3.10.0.0 then 3.10.0.1 and now 3.10.1.1 program times out after failing to retrieve directory listing. Have needed to downgrade to version 3.9.0.6 to establish connection and use program. FileZilla Client

Version: 3.10.1.1

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-02-01 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.21 SQLite: 3.8.8.2

Operating system:

Name: Windows 8.1 (build 9600), 64-bit edition Version: 6.3 Platform: 64-bit system

2015-02-16 20:35:12 5156 1 Status: Resolving address of ftp.allstyle-bathrooms.com.au 2015-02-16 20:35:12 5156 1 Status: Connecting to 116.0.23.214:21... 2015-02-16 20:35:12 5156 1 Status: Connection established, waiting for welcome message... 2015-02-16 20:35:12 5156 1 Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- 2015-02-16 20:35:12 5156 1 Response: 220-You are user number 5 of 50 allowed. 2015-02-16 20:35:12 5156 1 Response: 220-Local time is now 20:34. Server port: 21. 2015-02-16 20:35:12 5156 1 Response: 220-IPv6 connections are also welcome on this server. 2015-02-16 20:35:12 5156 1 Response: 220 You will be disconnected after 15 minutes of inactivity. 2015-02-16 20:35:12 5156 1 Command: AUTH TLS 2015-02-16 20:35:12 5156 1 Response: 234 AUTH TLS OK. 2015-02-16 20:35:12 5156 1 Status: Initializing TLS... 2015-02-16 20:35:12 5156 1 Status: Verifying certificate... 2015-02-16 20:35:12 5156 1 Status: TLS connection established. 2015-02-16 20:35:12 5156 1 Command: USER all49915 2015-02-16 20:35:12 5156 1 Response: 331 User all49915 OK. Password required 2015-02-16 20:35:12 5156 1 Command: PASS * 2015-02-16 20:35:13 5156 1 Response: 230 OK. Current restricted directory is / 2015-02-16 20:35:13 5156 1 Command: SYST 2015-02-16 20:35:13 5156 1 Response: 215 UNIX Type: L8 2015-02-16 20:35:13 5156 1 Command: FEAT 2015-02-16 20:35:13 5156 1 Response: 211-Extensions supported: 2015-02-16 20:35:13 5156 1 Response: EPRT 2015-02-16 20:35:13 5156 1 Response: IDLE 2015-02-16 20:35:13 5156 1 Response: MDTM 2015-02-16 20:35:13 5156 1 Response: SIZE 2015-02-16 20:35:13 5156 1 Response: MFMT 2015-02-16 20:35:13 5156 1 Response: REST STREAM 2015-02-16 20:35:13 5156 1 Response: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; 2015-02-16 20:35:13 5156 1 Response: MLSD 2015-02-16 20:35:13 5156 1 Response: AUTH TLS 2015-02-16 20:35:13 5156 1 Response: PBSZ 2015-02-16 20:35:13 5156 1 Response: PROT 2015-02-16 20:35:13 5156 1 Response: TVFS 2015-02-16 20:35:13 5156 1 Response: ESTA 2015-02-16 20:35:13 5156 1 Response: PASV 2015-02-16 20:35:13 5156 1 Response: EPSV 2015-02-16 20:35:13 5156 1 Response: SPSV 2015-02-16 20:35:13 5156 1 Response: ESTP 2015-02-16 20:35:13 5156 1 Response: 211 End. 2015-02-16 20:35:13 5156 1 Status: Server does not support non-ASCII characters. 2015-02-16 20:35:13 5156 1 Command: PBSZ 0 2015-02-16 20:35:13 5156 1 Response: 200 PBSZ=0 2015-02-16 20:35:13 5156 1 Command: PROT P 2015-02-16 20:35:13 5156 1 Response: 200 Data protection level set to "private" 2015-02-16 20:35:13 5156 1 Status: Connected 2015-02-16 20:35:13 5156 1 Status: Retrieving directory listing of "/public_html"... 2015-02-16 20:35:13 5156 1 Command: CWD /public_html 2015-02-16 20:35:13 5156 1 Response: 250 OK. Current directory is /public_html 2015-02-16 20:35:13 5156 1 Command: PWD 2015-02-16 20:35:13 5156 1 Response: 257 "/public_html" is your current location 2015-02-16 20:35:13 5156 1 Command: TYPE I 2015-02-16 20:35:13 5156 1 Response: 200 TYPE is now 8-bit binary 2015-02-16 20:35:13 5156 1 Command: PASV 2015-02-16 20:35:13 5156 1 Response: 227 Entering Passive Mode (116,0,23,214,33,198) 2015-02-16 20:35:13 5156 1 Command: MLSD 2015-02-16 20:35:33 5156 1 Error: Connection timed out 2015-02-16 20:35:33 5156 1 Error: Failed to retrieve directory listing

blue screen when installing latest filezilla version , does anybody know how to fix this<

Hello, Since a couple of weeks, when I set a "speed limit" to my downloads, they start but about 5 minutes later, they "stop". Actually, the current transfer still appears, nothing apparently changes, but the speed freezes at its last value and the transfer stops in reality. I can stop the queue processing... I mean Filezilla is not "frozen".

I can close and restart Filezilla to get it working again, but with the same problem 5 minutes later. Everything is ok if no speed limit is enabled.

Any idea ? Thanks from France !

Previous updates have gone smoothly Now Status: Connecting to 65.175.112.233:21... Status: Connection attempt failed with "EACCES - Permission denied". Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of ftp.acbtexas.org Status: Connecting to 65.175.112.233:21... Status: Connection attempt failed with "EACCES - Permission denied".

FileZilla Client

Version: 3.10.1.1

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-02-01 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.21 SQLite: 3.8.8.2

Operating system:

Name: Windows Vista (build 6002, Service Pack 2) Version: 6.0 Platform: 32-bit system

After this update in cannot connect to my sever. it gives me some unknown certificate error and cannot connect to server. I downgraded to the previous version and its working fine.

Hello,

I have upgraded filezilla to 3.10.1.1 and from then i am not able to connect ftp server. Please advise to resolve this issue asap.

Currently you can only hide the local tree view. I don't use the local section. I only use the remote section and drag & drop.

Is there a way to hide the entire local section? It's extra space that I could use.

Sadly it only collapses so far and that's it.

I would like to hide the entire local section. If my attachment works it will be marked red.

I'm using the version of MinGW specified in the build notes for Windows. As part of r6137, a process.h was included in FileZilla 3; this conflicts with the process.h that is shipped with MinGW, causing the build to fail (it fails with a bunch of undefined symbols; the root cause here is pthread.h is including process.h, picking up the FileZilla one instead of the MinGW one and causing the errors).

I renamed the FileZilla process.h to fzprocess.h and changed the include files everywhere, and that seemed to solve the problem.

When downloading to USB drive in Windows 7, if the drive disconnects for any reason the file download stops and does not restart when the drive reconnects. The file name of the partially downloaded file is moved to the successfully downloaded window instead of the download failed window. This makes you believe you downloaded the entire file successfully but instead you only downloaded part of the file and you have to check each file to make sure you downloaded all of the file.

It used to work correctly in older versions of the client.

I am using the following version:

Version: 3.10.1.1

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-02-01 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.21 SQLite: 3.8.8.2

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

When importing a Site Manager entry, the Base64-encoded password entry is treated as a plain-text password.

Steps to reproduce (3.10.1.1 and 3.10.2-rc2): 1) File -> Export -> Export Site Manager entries 2) XML file contains a Base64-encoded password string, which correctly decodes to the plain-text password 3) Import the Site Manager entry 4) Password to the FTP site is not accepted anymore by the remote server 5) Repeat Site Manager Export 6) XML file contains a different, longer Base64-encoded password string, which decodes to a Base64-encoded password string from step 2, not the correct plain-text password

After editing a file locally and hitting 'yes' on the dialog to upload the changed file with 'delete local copy' checked, and then the file fails to transfer to the server, the file gets deleted anyway and there's no way to recover it.

Hi i looked through the tracker and it seams this was reported more than once but still not properly working.

The directory listing works with Internet Explorer but filezilla doesn't show all files.

I've attached the log. Sorry but i had to obfuscate my ftp host and the IP in the passive transfer.

Hi i looked through the tracker and it seems this was reported more than once but still not properly working.

The directory listing works with Internet Explorer but filezilla doesn't show all files.

I've attached the log. Sorry but i had to obfuscate my ftp host and the IP in the passive transfer.

If I do, I can't connect to an FTP site. I always time out. So I then have to just reinstall 3.7.3 which works properly.

When downloading in

with Speedlimit e.g. parameters Down 400 KiB/s Up 200 KiB/s archive-Files like ZIP or GZ are downloaded in correct file size but are sometimes, but not always corrupt, this depends on the file size. The bigger in size the more sure the file will be corrupt. When trying to extract such a file with 7Zip the error message will be either "Data error in archived_filename. File is broken" or "Can not open ArchiveFilename as an archive" or "An attempt was made to move the file pointer before the beginning of the file."

FileZilla Client

Version: 3.10.2

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-03-02 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -msse -mfpmath=sse -O2 -g -Wall -g -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.3.13 SQLite: 3.8.8.3

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

Disclaimer: This is very similar to tickets ​4204 and ​7340, which both got rejected.

I've just tried using FileZilla v3.10.2 to connect to ftp.cisco.com

When I run nslookup, it says:

Non-authoritative answer:
Name:    ftp.cisco.com
Addresses:  2001:420:1101:9::a
          72.163.7.54

FileZilla then says:

Status:	Resolving address of ftp.cisco.com
Status:	Connecting to [2001:420:1101:9::a]:21...
Error:	Connection timed out after 20 seconds of inactivity
Error:	Could not connect to server
Status:	Waiting to retry...
Status:	Resolving address of ftp.cisco.com
Status:	Connecting to [2001:420:1101:9::a]:21...
Error:	Connection timed out after 20 seconds of inactivity
Error:	Could not connect to server

I am using IPv4 and IPv6 on my internal network, but I don't have IPv6 internet access (yet). By contrast, www.cisco.com currently has 3 addresses: 2a02:26f0:ca:286::90 2a02:26f0:ca:290::90 23.195.11.243

I can connect to that website, because the web browser (IE/Firefox) realises that the IPv6 address is inaccessible and so it uses IPv4 instead. I think that FileZilla should behave the same way for FTP sites.

As a workaround, I typed in the IPv4 address for ftp.cisco.com (72.163.7.54) and then FileZilla connected successfully.

When trying to FTP to Plesk 12.0 using Avtive or Passive mode we get the same issues.

Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Connected Status: Retrieving directory listing... Status: Server sent passive reply with unroutable address. Using server address instead. Command: LIST Response: 534 Protection level negotiation failed. Error: Failed to retrieve directory listing

The OS of the server is Server 2012.

When trying an alternative FTP client FTP Voyager we are able too FTP

After updating to the new version 3.10.2 on March 5, 2015 I am no longer able to view the directory listing thus unable to perform either uploads or downloads. This does not happen with my connection to GoDaddy.

I recently installed the FTP Client. After this I had an application called "super optimizer" installed and running without my authorization or having installed this application knowingly myself. I can only surmise that it came with the Filezilla installation. It blocked access to my desktop by displaying a dark grey window which could not be closed.
Removing the Super Optimizer was difficult because it infiltrated a lot in the Registry. I like to install the FTP Server as well but hesitate to do so with the above experience.
Are you aware of this Super Optimizer possibly being installed with FileZilla free downloads?

Just upgrade to new version; now i cannot log into server (previous version 2+ years old 3.6.02 and worked fine).

"Command: MSLD Connection timed out afer 20 second of inactivity Failed to retrieve directory listing"

config: FileZilla Client

Version: 3.10.2

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-03-02 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -msse -mfpmath=sse -O2 -g -Wall -g -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.3.13 SQLite: 3.8.8.3

Operating system:

Name: Windows 7 (build 7601, Service Pack 1) Version: 6.1 Platform: 32-bit system

========================= Trying to open a new connection, app says it already has a connection. But directory list does not succeed. Old version 3.6 works fine.

1) 2 days ago I tried to install FZ on the computer of a friend. This was a new installation.

Environment: Windows 8 + internet Explorer (IE) + Kapersky as antivirus I analyzed the exe installation file once downloaded with Kapersky, no issue reported. When I executed the file, it was hanging with an empty or black pop-up windows openening. I had to stop the computer and restart it

I think the file was around 700 ko ( the same size than the one mentioned by IE while confirming the download).

2) Today on my computer, where FZ is installed since a long time, and is runing as expected, I received an update and I see that FileZilla_3.10.2_win32-setup.exe is around 6064 Ko I got no issue while installing an using this new update.

Then I tried to download FileZilla from FZ site on my computer: Windows 7 + Chrome + Norton

Norton stopped the downloading sending messages as : "c90f.tmp (suspicious.Cloud9) deleted"

At the end no file is downloaded

the file c90f.tmp is loaded from ​http://cdn.qualitycontenthouse.com

Is the downloaded file corrupted? or is it a malware? I have no more access to the Windows 8 environment and hope to have not installed a malware on this computer which is not mine.

In both cases I started the download from: ​https://forum.filezilla-project.org/ and was redirected to sourceforge

Thanks for your time

When attempting to upload using FileZilla the server access does not list the directories. Unable to list directories is the error. At first I thought it was my problem then discovered after the update from my older version (3.9.0.5) is when the problem began. I rolled back to the 3.9.0.5 version and the app began to work correctly. I now ignore the prompt to update each time it loads. I have other clients that use FileZilla and I recommend to them not to update until further notice about this problem being solved.

As connection proceeds, it comes up with a "certificate expired" for the server. Whether or not this is 'OK'd' it then moves on, makes a complaint about non ascii characters and finally holds and times out at 'failed to read directory listing: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. (what non-ascii characters??) Status: Connected Status: Retrieving directory listing..

(there may be some extra lines here but they don't wait around long enough to be copied)

Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (173,254,28,147,20,170) Command: MLSD Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listing

Have installed v 3.9.0.5 on another PC and it works fine. Seems to be a problen with 3.10.2

Hi There,

I have been experiencing an error lately when I attempt to drop files into folders that are intended to replace outdated files. Perhaps some context will help...

We operate an online storefront for Neighborhood Health Plan. They have thousands of products which are identified by product codes. For example, one item might be labeled "11020". Each product has a thumbnail and full sized image which we drop into a directory in Filezilla, which we pull from when "creating the product". Thumbnail images have a _2 suffix, with _1 for the full sized image.

Now, lets say they print a new version of 11020 with new graphics, new colors, etc.. In this case we would need to create and drop in new thumbnails. So I would Scale and crop the image, save as 11020_1 and 11020_2, and drop it into the appropriate directory. When I do this, I see a prompt asking me If I want to replace the existing files with these new ones. I click yes to replace, but the file never gets swapped out. I find that the only option I have is to change the suffix to _T and _F for the new file to be available.

There are several other ramifications for this replace file bug, but I figured this was the easiest way to describe it.

US time change was on 3/8. Ever since then modified dates are an hour off.

Hi, I am facing severe problem in uploading TS files which are in encrypted form but when we upload files to the NAS server the size of the file gets changed while copying to NAS. This is happening with encrypted files only rest of the files remains same.Please assist in solving the issue. I have almost 10G of data which i need it like anything please help me out Thanks, Mohit

I love FileZilla and have used this program for years. I've never had an issue until this latest batch of updates. The last version that works for me is 3.9.0.6. Anything after that installs and opens fine. However, when trying to connect to my saved website (as I always have in the past - changing nothing), I get the message that it is "Retrieving directory listing...". It sits there for almost 30 seconds, then quickly spools through a few commands and ends with the red "Error: Connection timed out" and "Error: Failed to retrieve directory listing". Nothing in the settings for the connection has been changed, yet every version after the one listed gives me this problem. I have resorted to downgrading to the last working build to be able to access my websites. What is happening and how can I fix it?

Alwasy when I am uploading something to my server it does not show in the right side box (remote site:). It only appears when I click "REFRESH" seems it is not automatic have to do it manually.

Even in the left side box (local site:) it is not refreshing automatically. i have to do it manually to show the update on the left side box.

Hello,

I get a GnuTLS - 15 error on Windows 8.

Same trying on another PC under Windows 7 on the same network works.

FileZilla Client

Version: 3.10.2

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-03-02 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -msse -mfpmath=sse -O2 -g -Wall -g -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.3.13 SQLite: 3.8.8.3

Operating system:

Name: Windows 8.1 (build 9600), 64-bit edition Version: 6.3 Platform: 64-bit system

Log: 2015-03-13 08:38:19 3492 1 Status: Resolving address of ftp.car-pass.be 2015-03-13 08:38:19 3492 1 Status: Connecting to 85.112.27.122:990... 2015-03-13 08:38:19 3492 1 Status: Connection established, initializing TLS... 2015-03-13 08:38:19 3492 1 Error: GnuTLS error -15: An unexpected TLS packet was received. 2015-03-13 08:38:19 3492 1 Error: Could not connect to server 2015-03-13 08:38:19 3492 1 Status: Waiting to retry... 2015-03-13 08:38:24 3492 1 Status: Resolving address of ftp.car-pass.be 2015-03-13 08:38:24 3492 1 Status: Connecting to 85.112.27.122:990... 2015-03-13 08:38:24 3492 1 Status: Connection established, initializing TLS... 2015-03-13 08:38:24 3492 1 Error: GnuTLS error -15: An unexpected TLS packet was received. 2015-03-13 08:38:24 3492 1 Error: Could not connect to server

Any idea?

Kind regards

Status: Resolving address of server.kdimachine.com Status: Connecting to 50.76.186.9:21... Status: Connection established, waiting for welcome message... Status: Insecure server, it does not support FTP over TLS. Command: USER blixberg Response: 331 Please specify the password. Command: PASS Response: 530 Login incorrect. Error: Critical error: Could not connect to server

Status: Resolving address of server.kdimachine.com Status: Connecting to 50.76.186.9:21... Status: Connection established, waiting for welcome message... Status: Insecure server, it does not support FTP over TLS. Command: USER blixberg Response: 331 Please specify the password. Command: PASS Response: 530 Login incorrect. Error: Critical error: Could not connect to server

Status: Resolving address of server.kdimachine.com Status: Connecting to 50.76.186.9:21... Status: Connection established, waiting for welcome message... Status: Insecure server, it does not support FTP over TLS. Command: USER blixberg Response: 331 Please specify the password. Command: PASS Response: 530 Login incorrect. Error: Critical error: Could not connect to server

Upon upgrading to version 3.10.2 I receive the following message upon connecting:

"Server sent passive reply with unroutable address. Using server address instead."

The application then proceeds to time out after 20 seconds with this message:

"Error: Connection timed out after 20 seconds of inactivity

Error: Failed to retrieve directory listing."

This is my second attempt to do an upgrade to 3.10.2 - with identical results. I am returning to my previous version (3.8.0) which works fine. I will ignore the update offer which automatically pops up when I open the application - a bit of a nuisance!

Thanks