Custom Query (10426 matches)

around version 3.10.0, Encryption on all Site Manager connections get reset on the upgrade to Use explicit FTP over TLS if available. it's a real pain to put them back on 200 entries one by one. I begin to wonder if somehow the setting in the XML file got globally set to this new value or the encryption setting simply got ignored due to a bug either in reading or writing the xml file.

if I change the entry, it stays changed, so I am guessing it only happened during the upgrade process.

strangely enough, I looked through the sitemanager.xml file, and nowhere do I see my Encryption type saved. so I guess it got dropped from some previous or current version. edited sample: <Server>

<Host>192.168.1.1</Host> <Port>21</Port> <Protocol>0</Protocol> <Type>0</Type> <User>JOE PALOOKA</User> <Pass>ABCDEF</Pass> <Logontype>1</Logontype> <TimezoneOffset>0</TimezoneOffset> <PasvMode>MODE_ACTIVE</PasvMode> <MaximumMultipleConnections>0</MaximumMultipleConnections> <EncodingType>Auto</EncodingType> <BypassProxy>0</BypassProxy> <Name>jim 2</Name> <Comments /> <LocalDir /> <RemoteDir /> <SyncBrowsing>0</SyncBrowsing>jim 2

</Server>

I am getting recurring file open errors for local files that have been opened once already.

I was not getting these in the prior version.

A screen excerpt with the error is attached.

Cannot connect with quick connect, always timeout. In site Manager, I can connect but everytime must enter password even the remember password box is check. This problem only happens with this new version. How to correct?

Since the new update recently I am having serious issues with connecting and dropping out while transferring files to hosting server. If and when it does connect it fails after attempting to enter any other folders.

Error: Connection timed out Error: Failed to retrieve directory listing Response: 421 Too many connections (8) from this IP Error: Could not connect to server

I have already been in contact with my hosting service and everything is working there.

Can you tell me how long a fix will be done and a new update as I need to upload within the next 72 hours client files to server.

Kind regards.

Resolving address of ftp.keandf.com Status: Connecting to 74.220.207.155:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (74,220,207,155,111,227) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing Status: Resolving address of ftp.keandf.com Status: Connecting to 74.220.207.155:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (74,220,207,155,93,18) Command: MLSD Error: The data connection could not be established: ETIMEDOUT - Connection attempt timed out Error: Connection timed out Error: Failed to retrieve directory listing

I can't edit again a same file. msg :

"Opening failed The file 'xxxxx' could not be opened : the associated command failed."

But when i start again Fillezilla, i can edit just one time the file or another file. The associated command is good one time.

Just started receiving an error 'The associated command failed' when right clicking a local file to edit once the file had previously been edited opened via FileZilla. I would expect to see the message like "This file is already open for editing..". This behaviour reoccurs without success.

FileZilla Client

Version: 3.10.0.1

Build information:

Compiled for: i386-apple-darwin13.2.0 Compiled on: i386-apple-darwin13.2.0 Build date: 2015-01-12 Compiled with: Apple LLVM version 6.0 (clang-600.0.56) (based on LLVM 3.5svn) Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.20 SQLite: 3.8.6

Operating system:

Name: Mac OS X (Darwin 14.0.0 x86_64) Version: 10.10

First I open a file to edit, using right mouse click and choose "Edit". Then Notepad (the associated program) opens. When I close Notepad and then again choose "Edit" I get a warning: (translated from Dutch) File can't be opened. The corresponding command has failed.

This happened after I upgraded FileZilla Client to version 3.10.0.

After updating to 3.10.0.1 if i upload a file as root (to centos) the permissions are blanked - just set to dashes - reverting to previous version fixes the issue

installed newest version automatically...3.10....now a certain site we use everyday comes up with encrypted certificate and won't let us connect to it. rolled back to 3.09xxx and the site works fine?

Upgraded to 3.10.0.1 New files uploaded to server via SFPT now get no permissions where they used to be given default folder permissions.

Hello,

On OSX 10.9.5 Maverciks, Filezilla 3.9 and 3.10 fails to auto upgrade itself.

1- It downloads a package in ~/FileZilla_3.10.0.1_macosx-x86.app.tar.bz2 2- then extract it as ~/FileZilla_3.10.0.1_macosx-x86.app 3- It fails to replace (maybe because Filezilla is still opened) /Applications/Filezilla.app

I have several other problems with this mecanism : 1- The downloaded path should be : ~/Downloads/FileZilla_3.10.0.1_macosx-x86.app.tar.bz2 instead of ~/FileZilla_3.10.0.1_macosx-x86.app.tar.bz2 Or maybe provide a settings to choose the download path

2- After I tried to manually extract ~/FileZilla_3.10.0.1_macosx-x86.app.tar.bz2 When I doubleclick on ~/FileZilla_3.10.0.1_macosx-x86.app OSX error said package is broken.

But I can rightclick and then choose explore package in order to find the Filezilla.app file.

For now I still upgrade Filezilla manually...

I think the autoupgrade method could be slightly enahanced...

Thanx.

We use FileZilla as our FTP interface, uploading files to our server. As soon as we installed version 3.10.0.1 we were no longer able to connect to our server. Here is the string we get each time:

Status: Resolving address of support.multicamusa.com Status: Connecting to 65.60.63.168:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Error: Connection timed out Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of support.multicamusa.com Status: Connecting to 65.60.63.168:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 1 of 50 allowed. Response: 220-Local time is now 08:07. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: Connection timed out Error: Could not connect to server

#9993: Latest update problem

Reporter: Richard | Owner:

Type: Bug report | Status: new

Priority: high | Component: FileZilla Client Keywords: Latest update | Os: Windows

Os_version: windows 7 |

i just updated Filezilla 3.10.0 and now none of my 20 or so website will download any files, it keeps timing out.

I'f there is no quick fix can i some how roll back to the last version?

It won't be anything my end ass my websites are with many different servers and i am a long term user of Filezilla

I downloaded the latest version of Filezilla. All of my connections work except the one for the test Sybase Interface Engine. I get this error - Connection attempt failed with "EAI_NODATA - No address associated with nodename".

I have updated to the latest version of FileZilla 3.10.0.1 and i have found that new files i upload to my server all have no permissions what so ever.

I know it is not an issue with my server as i tested this with Transit and it worked as normal. I have used filezilla for as long as i can remember and this is the first time i have seen this issue. I wonder if anyone else is experiencing the same issues as i am.

I have updated to the latest version of FileZilla 3.10.0.1 and i have found that new files i upload to my server all have no permissions what so ever.

I know it is not an issue with my server as i tested this with Transit and it worked as normal. I have used filezilla for as long as i can remember and this is the first time i have seen this issue. I wonder if anyone else is experiencing the same issues as i am.

In versions 3.10.0.1 and 3.10.0.2 the programm doesn´t allow to list the directory content in ACTIVE mode. This is the log in 3.10.0.2 versión:

Status: Resolving address of controlsoft.com.co Status: Connecting to 192.99.41.241:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current directory. Command: TYPE I Response: 200 Type set to I. Command: PORT 192,168,1,3,181,112 Response: 501 Server cannot accept argument. Command: PASV Response: 227 Entering Passive Mode (192,99,41,241,217,47). Command: LIST Response: 150 Opening BINARY mode data connection. Error: Connection timed out Error: Failed to retrieve directory listing

This is the log on 3.9.0.6, which works fine.

Status: Resolving address of controlsoft.com.co Status: Connecting to 192.99.41.241:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER descargas Response: 331 Password required for descargas. Command: PASS * Response: 230 User logged in. Command: SYST Response: 215 Windows_NT Command: FEAT Response: 211-Extended features supported: Response: LANG EN* Response: UTF8 Response: AUTH TLS;TLS-C;SSL;TLS-P; Response: PBSZ Response: PROT C;P; Response: CCC Response: HOST Response: SIZE Response: MDTM Response: REST STREAM Response: 211 END Command: OPTS UTF8 ON Response: 200 OPTS UTF8 command successful - UTF8 encoding now ON. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current directory. Command: TYPE I Response: 200 Type set to I. Command: PORT 192,168,1,3,181,207 Response: 200 PORT command successful. Command: LIST Response: 125 Data connection already open; Transfer starting. Response: 226 Transfer complete. Status: Calculating timezone offset of server... Command: MDTM 2D_BarCode.zip Response: 213 20120930143838 Status: Timezone offsets: Server: -18000 seconds. Local: -18000 seconds. Difference: 0 seconds. Status: Directory listing successful

I have been using FileZilla for years but latest updates has caused problems: Status: Connecting to 96.30.4.72:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (96,30,4,72,117,127) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing I'm now using another program but want to get back to Filezilla

I've updated to the latest version but now I can't get onto any of my sites because it just keeps timing out.

Error: Connection timed out Error: Failed to retrieve directory listing

Is this a bug or is there something I need to change. If it's a bug can anyone suggest a free alternative until it gets fixed?

Many thanks!

When editing a local file trough an external editor 'notepad++' first time it opens the file. Ok after closed the file trying to edit it again will show (filezilla error window) 'Associated command failed'. ​http://grab.by/DVtE It only can be opened again after restarting filezilla or renaming parent folder. (Note: must be connected to an ftp on secondary window.) It worked before 2 updates. Now is version filezilla 3.10.0.2

Hi,

I have been unable to connect to my usual servers after I updated FileZilla yesterday. It was working fine before the update.

Error message: Connection timed out ... Could not connect to server.

I ran tracer command to see if I could reach the server — and I could. So it's not a machine or external connectivity issue.

Furthermore, I could reach the server and do normal upload functions via FireFTP, which is not my first choice. I definitely prefer FileZilla.

Thanks.

Anu

I updated filezilla today (See below): I use GoDaddy with Plesk. Never had any problems in the past, however today when i tried updating website pages after connecting (connecting is fine), it not only deletes the old versions from the server but won't upload the new versions... It comes up with a failed transfer log and says "failed to start transfer".

Restarting filezilla etc does not fix the problem. Please advise!

FileZilla Client

Version: 3.10.0.2

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-01-16 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.20 SQLite: 3.8.7.2

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

Have been using FileZilla. FTP had been working fine. Perhaps last update of FileZilla changed something – They updated yesterday. It does connect, and I do get the file listing at the Remote site. However:

During a file update (upload) I get a message: Response: 150 Opening ASCII mode data connection. Response: 550 The supplied message is incomplete. The signature was not verified. Error: File transfer failed

• If the file to be updated is already at the Remote Site, I will have seen something happening at the Remote Site view of FileZila, then the target file disappears.

• Now if the target file of that name is not there, if I try again, it does upload the desired file … keep in mind, however, that I still get that error message.

This is true with other hosts I am using also.

My webhost website has an alternative, Cyberduck, and the update worked with that, but... I strongly prefer FileZilla interface.

The latest update is having issues connecting to my web host server...I am not the only one having this issue!!! Please can you fix this as soon as possible while I continue using the previous version.

First I connect to the server with the client and it is fast and no problems. I open the folders on server and on my pc so I can make a transfer. I doubleclick to transfer a file, and it reacts allright, but then it reports an error and for a slight second I can see the file in the list on the serverfolder and then it disappears. So instead of updating the file on the server the file is now missing!!!! I tried several times. This occured just after upgrading the client on automatic suggestion. Which I have done before without problems. Now this is extra annoying as it is the last thing I wanted to do before going on a travel tomorrow morning. And now instead of having an updated website I have a website with 2 missing files. Here is a copy of the report:

Status: Resolving address of s219191705.onlinehome.fr Status: Connecting to 82.165.174.120:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Connected Status: Retrieving directory listing... Status: Calculating timezone offset of server... Status: Timezone offsets: Server: 3600 seconds. Local: 3600 seconds. Difference: 0 seconds. Status: Directory listing of "/u46581113" successful Status: Resolving address of s219191705.onlinehome.fr Status: Connecting to 82.165.174.120:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Connected Status: Starting upload of E:\Hallon\Hemsidor\Brocante Albinque\sieges.htm Command: CWD /u46581113 Response: 250 CWD command successful. Command: PWD Response: 257 "/u46581113" is current directory. Command: TYPE A Response: 200 Type set to A. Command: PASV Response: 227 Entering Passive Mode (82,165,174,120,202,118). Command: STOR sieges.htm Response: 150 Opening ASCII mode data connection. Response: 550 The supplied message is incomplete. The signature was not verified. Error: File transfer failed Status: Starting upload of E:\Hallon\Hemsidor\Brocante Albinque\sieges.htm Status: Retrieving directory listing of "/u46581113"... Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (82,165,174,120,202,122). Command: LIST Response: 150 Opening BINARY mode data connection. Response: 226 Transfer complete. Command: TYPE A Response: 200 Type set to A. Command: PASV Response: 227 Entering Passive Mode (82,165,174,120,202,123). Command: STOR sieges.htm Response: 150 Opening ASCII mode data connection. Response: 550 The supplied message is incomplete. The signature was not verified. Error: File transfer failed Status: Starting upload of E:\Hallon\Hemsidor\Brocante Albinque\sieges.htm Status: Retrieving directory listing of "/u46581113"... Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (82,165,174,120,202,133). Command: LIST Response: 150 Opening BINARY mode data connection. Response: 226 Transfer complete. Command: TYPE A Response: 200 Type set to A. Command: PASV Response: 227 Entering Passive Mode (82,165,174,120,202,135). Command: STOR sieges.htm Response: 150 Opening ASCII mode data connection. Response: 550 The supplied message is incomplete. The signature was not verified. Error: File transfer failed Status: Retrieving directory listing of "/u46581113"... Status: Directory listing of "/u46581113" successful

Your new version update is giving me ERROR messages.

FILEZILLA DETAILS

FileZilla Client

Version: 3.10.1.1

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-02-01 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.21 SQLite: 3.8.8.2

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

_

FIRST ATTEMPT TO LOGIN

Status: Resolving address of www.ekamcentre.com Status: Connecting to 210.48.154.8:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 1 of 50 allowed. Response: 220-Local time is now 10:37. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: AUTH TLS Error: Connection timed out Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of www.ekamcentre.com Status: Connecting to 210.48.154.8:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 1 of 50 allowed. Response: 220-Local time is now 10:37. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: AUTH TLS Error: Could not connect to server

_

SECOND ATTEMPT TO LOGIN

Status: Resolving address of www.ekamcentre.com Status: Connection attempt failed with "EAI_NODATA - No address associated with nodename". Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of www.ekamcentre.com Status: Connection attempt failed with "EAI_NODATA - No address associated with nodename".

FZ 3.10.1.1 build fails in two .cpp files which include engine/tlssocket.h due to the ECONNABORTED reference in the latter. Attached patch includes errno.h in tlssocket.h since.

Ever since that last 2 updates I've been unable to connect to any remove hosts. I keep getting similar failures. For some reason it times out retrieve the directories. I've tried 2 other FTP clients and they resolve with no issue.

Status: Resolving address of ftp.spierce-1.bluehoststaff.com Status: Connecting to 50.87.230.172:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (50,87,230,172,218,171) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

Hey,

since last updates to newest version (3.10.1.1) it´s not longer to connect to FTP. It initialize TLS connection wich is not used. We try it with and without certificate.

FileZilla Client

Version: 3.10.1.1

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-02-01 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.21 SQLite: 3.8.8.2

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

Server used Plesk 11.5 on Linux Debian (try it with other hostings too).

Status: Resolving address of XXX-XXX.com Status: Connecting to 87.XXX.XX.XX:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (87,120,91,25,182,21). Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

Since updating FileZilla Client from v3.10.0.2 to v3.10.1.1, when FileZilla prompts for my 'Unknown certificate' it no longer shows the checkbox for 'Always trust certificate for future sessions'.

Certificate is within the Validity period and host address matches the SAN. This is self-signed, with many SAN entries to cover all accessible hostnames the FTP is accessed from internally and externally.

I can only assume because of the number of SAN in the list, it pushes the checkbox off screen, and doesn't have anything to do with any problem or expiration of the certificate.

Only other issues I found similar to this were expired certificates where the checkbox was visible, but not selectable.

For me, it's not even visible.

blue screen when installing latest filezilla version , does anybody know how to fix this<

After this update in cannot connect to my sever. it gives me some unknown certificate error and cannot connect to server. I downgraded to the previous version and its working fine.

I'm using the version of MinGW specified in the build notes for Windows. As part of r6137, a process.h was included in FileZilla 3; this conflicts with the process.h that is shipped with MinGW, causing the build to fail (it fails with a bunch of undefined symbols; the root cause here is pthread.h is including process.h, picking up the FileZilla one instead of the MinGW one and causing the errors).

I renamed the FileZilla process.h to fzprocess.h and changed the include files everywhere, and that seemed to solve the problem.

When importing a Site Manager entry, the Base64-encoded password entry is treated as a plain-text password.

Steps to reproduce (3.10.1.1 and 3.10.2-rc2): 1) File -> Export -> Export Site Manager entries 2) XML file contains a Base64-encoded password string, which correctly decodes to the plain-text password 3) Import the Site Manager entry 4) Password to the FTP site is not accepted anymore by the remote server 5) Repeat Site Manager Export 6) XML file contains a different, longer Base64-encoded password string, which decodes to a Base64-encoded password string from step 2, not the correct plain-text password

After editing a file locally and hitting 'yes' on the dialog to upload the changed file with 'delete local copy' checked, and then the file fails to transfer to the server, the file gets deleted anyway and there's no way to recover it.

When trying to FTP to Plesk 12.0 using Avtive or Passive mode we get the same issues.

Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Connected Status: Retrieving directory listing... Status: Server sent passive reply with unroutable address. Using server address instead. Command: LIST Response: 534 Protection level negotiation failed. Error: Failed to retrieve directory listing

The OS of the server is Server 2012.

When trying an alternative FTP client FTP Voyager we are able too FTP

US time change was on 3/8. Ever since then modified dates are an hour off.

Hi,

I wonder if there is a setting in filezilla that change the order of files in uploaded folders ? I got myself a new mp3 player and it is making playlists directly from the folders.

I numbered the songs so they would appear natural order. But when I come to mp3 number 10 it goes in under number 1 ?? So the playlist is completely spoiled.

Is there a setting in filezilla that corrects this ?

FileZilla Client

Version: 3.7.3

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2013-08-07 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 3.1.11 SQLite: 3.7.16.2

Operating system:

Name: Windows NT 6.1 (build 7601, Service Pack 1) Version: 6.1 Platform: 64 bit system

Status: Insecure server, it does not support FTP over TLS. Command: USER mirprepmain Response: 331 Password required for mirprepmain. Command: PASS Response: 530 User mirprepmain cannot log in. Error: Critical error: Could not connect to server

Status: Insecure server, it does not support FTP over TLS. Command: USER mirprepmain Response: 331 Password required for mirprepmain. Command: PASS Response: 530 User mirprepmain cannot log in. Error: Critical error: Could not connect to server

Hai

i try to connect my domain but server is not connecting please.. server is not connecting i got the error message as could not connect the server..pls i need an needful help its urgent pls

Hi there,

My Wordpress site is down and Im not even able to access the Wordpress admin login page. I tried using FTP to access it, it wouldnt connect either. Im getting the following error in Filezilla. Request you to help me with this asap.

Status: Resolving address of xxxxxx.com Status: Connecting to 108.167.142.41:21... Status: Connection established, waiting for welcome message... Status: Insecure server, it does not support FTP over TLS. Command: USER xxxxx Response: 331 User xxxxx OK. Password required Command: PASS Response: 530 Login authentication failed Error: Critical error: Could not connect to server

Dear Support I have problem access with my Filezilla last version (3.10.3) , if I used the version (3.9.0.6) login OK

here is the error in my apps (3.10.3)

##################################### Status: Connecting to 202.169.44.161:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (202,169,44,161,128,177) Command: MLSD Error: The data connection could not be established: ECONNREFUSED - Connection refused by server

i just updated today and never before had my filezila stopped downloading before finish error message : filezila has stoped working then it aborts the task

i tried the download a backup of a webshop 4 times now and it keeps stopping/aborting the task

Hi, I've lost a password, but all the old tricks for recovering passwords on windows don't work in this version.

What can I do?

I am on Windows 7. Thanks.

Filezilla Version: 3.10.3 FTP Server: WS_FTP 7.6.2 Transfer protocol: FTP Transfer from this country to another country, there are about 9000 files and folders need to be transferred. All of them are pdf or office files. When I transferred half of them, Filezilla client stop transferring, I can use other FTP client to connect to the FTP server. I can do nothing except cancelling the task. It happens three times today.

i cant connect to server on win 8 i start Filezilla as admin and there are errors:

Status:	Ustalanie adresu IP dla serwer1370279.home.pl
Status:	Łączenie z 89.161.160.15:21...
Status:	Połączenie nawiązanie, oczekiwanie na wiadomość powitalną...
Status:	Inicjowanie TLS...
Błąd:	Otrzymano z serwera sygnał TLS: Handshake failed (40)
Błąd:	Nie można połączyć się z serwerem
Status:	Oczekiwanie na ponowienie...
Status:	Ustalanie adresu IP dla serwer1370279.home.pl
Status:	Łączenie z 89.161.160.15:21...
Status:	Połączenie nawiązanie, oczekiwanie na wiadomość powitalną...
Odpowiedź	220-Idea FTP Server v0.80 (serwer1370279.home.pl) [89.161.160.15]
Odpowiedź	220 Ready
Polecenie:	AUTH TLS
Odpowiedź	234 AUTH command successful.
Status:	Inicjowanie TLS...
Błąd:	Otrzymano z serwera sygnał TLS: Handshake failed (40)
Błąd:	Nie można połączyć się z serwerem

Upgraded FileZilla Client to 3.10.3, starting receiving the following error:

Initializing TLS... Error: Received TLS alert from the server: Handshake failed (40) Error: Could not connect to server

FTP sites stopped connecting, but external sftp sites were connecting properly.

Uninstalled 3.10.3 and reinstalled 3.9. To remain secure, is there a fix/patch that will allow us to use 3.10? If not, is there another solution?

Hi ! My name is Boris, I was installed the MAC OSX Malverick there is little and I also installed the FileZilla Client 3.10.3 ​http://img11.hostingpics.net/pics/856656Capturede769cran20150525a768023905.png but I have a problem when I click "update" for 3.11.0.1 version. ​http://img11.hostingpics.net/pics/347072Capturede769cran20150525a768023854.png After unpacking the "FileZilla_3.11.0.1_macosx-x86.app.tar.bz2" The file "FileZilla_3.11.0.1_macosx-x86.app" is corrupted... impossible launch FileZilla... ​http://img11.hostingpics.net/pics/936835Capturede769cran20150525a768023927.png ​http://img11.hostingpics.net/pics/429643Capturede769cran20150525a768024013.png

Where is a problem?

Regard, Boris

Hello, could you create this simple feature? Just replace upload dialog with direct upload without prompt?

I tried to find how to do it, but no luck. I am surprised.

From my point of view, this is the reason why a lot of developers are using another FTP client. So help us and save our time, please.

Thank you!

Random instances of uploading using SFTP on a CUSTOM PORT working fine then upon a single or multiple file upload, we receive this message.

07:37:44 Error: Received unexpected end-of-file from SFTP server 07:37:44 Error: Could not connect to server 07:37:44 Status: Delaying connection for 5 seconds due to previously failed connection attempt...

Repeated a few times in message window.

We are using iMacs running 10.7 10.8 running latest Filezilla 3.11.0.1 This began happening in previous version.

Generally we have to wait 5-10 minutes or so and after many reconnection/restart attempts we can again upload for a while. Seems to not matter how many or how few people are connected.

PERMISSIONS being set As a side note we are now also seeing files we upload all having no read or write permissions. We have to manually reset permissions. Server is a Dedicated Linux server we have been using in this way for a few years without these issues.

We rely on the Last Modified Date and Time column. Currently the time stamp is hours off. I last modified a report at 7:54 AM and the time stamp shows 3:54 AM. In the settings menu under the Date/Time format section, both Date and Time formatting options are set to "Use System Defaults". My system date and time is accurate for my time zone.

I have tested this on multiple FTP sites and have found a four hour time difference is displayed when uploading a file. This has caused issues with customers of ours who utilize this program on their files. Attached is a picture of a file I uploaded with the time it said it was uploaded 4:41 AM and the computer time 8:40 AM. I did not adjust any settings to the application or to my computer.

Hi,

I am facing this error since the latest update, everytime i connect to sever it displays XML error

First Pop-up { Title : Error Writing XML File Content : Could Not Write "C:\Users\Administrator\AppData\Roaming\FileZilla\recentservers.xml" : Failed To Write. }

Second Pop-up {

Title : FileZilla Error Content : 10:53:46 AM: can't open file 'C:\Users\Administrator\AppData\Roaming\FileZilla\recentservers.xml' (error 0: the operation completed successfully.) 10:53:46 AM: File 'C:\Users\Administrator\AppData\Roaming\FileZilla\recentservers.xml' couldn't be removed (error 0: the operation completed successfully.)

Not able to drag and drop from Filezilla into Windows explorer window

Error message says could not determine target for drag and drop , shell extension is not installed correctly or the target is not an explorer window

Have tried to re-register the shell extension as recommended here ​https://forum.filezilla-project.org/viewtopic.php?t=8607

Registration is successful but makes no difference to the problem

Could you advise if there is anything else that i can try

Best

M

Not able to drag and drop from Filezilla into Windows explorer window

Error message says could not determine target for drag and drop , shell extension is not installed correctly or the target is not an explorer window

Have tried to re-register the shell extension as recommended here ​https://forum.filezilla-project.org/viewtopic.php?t=8607

Registration is successful but makes no difference to the problem

Could you advise if there is anything else that i can try

Best

M

Not able to drag and drop from Filezilla into Windows explorer window

Error message says could not determine target for drag and drop , shell extension is not installed correctly or the target is not an explorer window

Have tried to re-register the shell extension as recommended here ​https://forum.filezilla-project.org/viewtopic.php?t=8607

Registration is successful but makes no difference to the problem

Could you advise if there is anything else that i can try

Best

M

With the latest version of the client (3.12), Asian filenames aren't shown properly anymore.

With Version 3.11.0.2 With version 3.12

I just upgraded to the new 3.12.0.1 release and discovered that it does not recognize folders in the server file listing as folders. It only shows them as files and tries to download them when double clicked on. The only way to access the folders is if you have the Synchronized browsing on and have the same folders in the local computer.

Bonjour,

Nous avions un site sur wix que j'ai supprimé. Le nom de domaine est sur ovh. J'ai totalement supprimé le site six et j'ai refait tout un site hébergé chez ovh. J'ai tout mis en ligne via filezilla. Pourtant, lorsque je tape le nom de domaine sur internet, c'est toujours une page wix qui apparait disant que le site a été supprimé. Je ne comprends pas pourquoi il ne prend pas le nouveau site. J'ai pris contact avec eux et ov, ainsi qu'avace vous pour voir ce qui se passe. ftp.brusselsiloveyou.com

In the easiest form of server-to-server transferring I could think of is by opening multiple instances of filezilla client, then dragging and dropping between the clients.

Linux to Linux (to start)?!

My system (just for reference, but i want to copy files from one linux server to another without downloading to windows in between):

FileZilla Client

Version: 3.12.0.2

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-07-09 Compiled with: x86_64-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.4.2 SQLite: 3.8.10.2

Operating system:

Name: Windows NT 10.0 (build 10240), 64-bit edition Version: 10.0 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 Settings dir: C:\Users\Mike\FileZilla\

Filezilla fails to connect to an AIX system from a windows client. Tested cuteftp - same environment no issues.

Status: Connecting to 10.241.209.195:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Error: GnuTLS error -15: An unexpected TLS packet was received. Error: Could not connect to server Status: Waiting to retry... Status: Connecting to 10.241.209.195:21... Status: Connection established, waiting for welcome message... Response: 220 bono FTP server (Version 4.2 Thu Apr 17 02:03:14 CDT 2008) ready. Command: AUTH TLS Response: 234 Using authentication type TLSv1 Status: Initializing TLS... Error: GnuTLS error -15: An unexpected TLS packet was received. Error: Could not connect to server

Hi,

I've downloded the source code from here https://filezilla-project.org/download.php?show_all=1

​http://sourceforge.net/projects/filezilla/files/FileZilla_Client/3.13.0/FileZilla_3.13.0_src.tar.bz2/download?nowrap

And started to compile on Fedora 21. There's a file mizzing in the src distribution fzputtygen_interface.h

However I donwloaded the src from SVN and there wasn't any issue when compiling.

There seems to be a problem with the Icons of Filezilla 3.14 running under Mac OS X 10.11 (El Capitan)

View this screenshot:

FileZilla Client

Version: 3.14.0

Build information:

Compiled for: x86_64-apple-darwin14.5.0 Compiled on: x86_64-apple-darwin14.5.0 Build date: 2015-09-16 Compiled with: Apple LLVM version 6.1.0 (clang-602.0.53) (based on LLVM 3.6.0svn) Compiler flags: -g -O2 -Wall -g -std=gnu++14

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.4.4 SQLite: 3.8.11.1

Operating system:

Name: Mac OS X (Darwin 15.0.0 x86_64) Version: 10.11 CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx aes pclmulqdq rdrnd Settings dir: /Users/hubert/.filezilla/

I typed 121.0.0.1 instead of 127.0.0.1 and told it to use this all the time. It does. I uninstalled, rebooted and reinstalled several times and it always tries 121.0.0.1 and won't let me change it.

<?xml version="1.0" encoding="UTF-8" standalone="true"?> <FileZilla3>

<Servers>

<Server>

<Host>ftp.dreamblitz.com</Host> <Port>21098</Port> <Protocol>sftp</Protocol> <Type>2</Type> <User>dreaqkjc</User> <Logontype>2</Logontype> <TimezoneOffset>0</TimezoneOffset> <PasvMode>MODE_DEFAULT</PasvMode> <MaximumMultipleConnections>0</MaximumMultipleConnections> <EncodingType>Auto</EncodingType> <BypassProxy>0</BypassProxy>

. <Name>ftp.dreamblitz.com</Name>

<Comments/> <LocalDir/>

<SyncBrowsing>0</SyncBrowsing> ftp.dreamblitz.com

</Server>

</Servers>

</FileZilla3>

So My name is Arthur and I accedentally changed the word press url, cause I was alittle spooked that the both my site url and my wordpress url, so I had validating in WC3 validator and it show that I needed to get and 404 error and...come to find out that needed to get rid of the redirect, in the config_wp.php file...it also revealed great reviews.code writer.

Please help me access my website. I took the liberty of removing the the redirect located in this post, as well as a line maker.

Message recommends I move to trash and that its broken? I see previous ticket reports the same thing but I'm not using Apple app store for this. I'm downloading from source forge? Any ideas?

Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 1 of 150 allowed. Response: 220-Local time is now 16:46. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 5 minutes of inactivity. Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server

Filezilla Server does not accept filenames like db-backup.10.5.4-4.brightmail.Feb-08-16-11-49.full.manual.tar when uploading such files --> 550 invalid filename

Filezilla should accept all valid Windows filenames

I cannot upload a file with the name db-backup.10.5.4-4.brightmail.Feb-08-16-11-49.full.manual.tar.bz2

(000001) 08.02.2016 11:49:39 - spamfilter (192.168.201.122)> STOR /backup/db-backup.10.5.4-4.brightmail.Feb-08-16-11-49.full.manual.tar.bz2

(000001) 08.02.2016 11:49:39 - spamfilter (192.168.201.122)> 550 Filename invalid

(000003) 08.02.2016 12:49:31 - spamfilter (192.168.201.122)> 150 Opening data channel for file upload to server of "/db-backup.10.5.4-4.brightmail.Feb-08-16-12-49.full.manual.tar.bz2"

(000003) 08.02.2016 12:49:31 - spamfilter (192.168.201.122)> 550 can't access file.

(000007) 08.02.2016 13:21:12 - spamfilter (172.26.100.100)> STOR db-backup.10.5.4-4.brightmail.Feb-08-16-11-49.full.manual.tar.bz2.txt

(000007) 08.02.2016 13:21:12 - spamfilter (172.26.100.100)> 150 Opening data channel for file upload to server of "/db-backup.10.5.4-4.brightmail.Feb-08-16-11-49.full.manual.tar.bz2.txt" (000007) 08.02.2016 13:21:12 - spamfilter (172.26.100.100)> 550 can't access file.

I can upload other files with more normal filenames successfully in the same session. The problem must have to do with the filename. Windows is able to handle this filename properly, so I think Filezilla should also be able to do that.

Regards Steingau

Hi,

I create xml output on windows pc and transfer my another work pc (ubuntu 14.04), and start problem right here :)

if my password just numeric or string or alpaNumeric, is fine, not problem

but if my password contain any chracter, (* ~ % & ^{etc) , then password not working before transfer.}

I was test many times.

Hi, I have 20 MBPS Leased line conncetion, even then the upload speed in filezilla i am getting is 20 KB, why is this? in order to upload files to our servers it's now taking hours

For More info, file zilla details, is below: FileZilla Client

Version: 3.16.0

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2016-02-29 Compiled with: x86_64-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -std=gnu++14

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.4.9 SQLite: 3.10.2

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx aes pclmulqdq Settings dir: C:\Users\srikanth.LOCAL\AppData\Roaming\FileZilla\

Hello,

Using FZ for years, to manage web sites on hosted servers. With proper settings, FZ always preserved timestamps on upload as expected.

Each time FZ proposes to update, I do it. Currently I am on version 3.16.0 (last one). Today I do major updates and detects that timestamps on hosted server are NOT preserved. I have checked that setting IS active (see capture).

Of course, I can not control whether some change on hosted server is the origin of the issue.

What can I do for further investigation? I have activated log, but no data yet, I have to do some more uploads ...

Hello,

I am trying to upgrade latest version of filezilla 3.16.1 but it is giving error in Windows vista and the upgradation stops in between and corrupts the older version too.

It took me 2 hours to find an older version and reinstall.

With Best Regards Atul Gupta

On my Mac I noticed that when uploading files with german umlauts in their names to Linux or Windows servers, those filenames are not recognized the same as already existing ones with that same name. I end up having them duplicated, two files with seemlingsly the same name and a lot of encoding problems and troubles.

Cause of this seems to be that Mac filesystems save all unicode characters in decomposed state, while Windows and Linux use composed ones. FileZilla for Mac should abstract this by normalizing all unicode filenames to composed version on upload. The mac filesystem on the other hand does automatically decompose characters, so that shouldn't be a problem.

While processing a download queue, if a local disk becomes full, FileZilla aborts downloading to this disk and reports these files as successful.

Please see attached file for:

a) FileZilla build details and system details b) A sample log excerpt from a FileZilla session. Approximately 24 files were being downloaded, each between 150 MiB and 250 MiB. Names, paths and hostnames were redacted. No lines within this excerpt were omitted.

Expected behaviour: When target local disk is full, files being downloaded to this disk are reported as failed and show up in Failed transfers. Subsequent file downloads in the queue, to the same disk, should also be reported as failed. FileZilla's notification, when the queue is processed, should report an error.

Actual behaviour: All affected files are reported as Successful, show up in the Successful transfers list, and the FileZilla tooltip reports that all files transferred successfully.

Observations: The files being downloaded when disk becomes full are truncated, as expected. Other files in the queue are created as zero-byte files.

Hi,

Could you Please suggest the steps to recover my username and password details

My website: www.ExcelGuruji.com

Thanks Makk

I can't resize the window. I have tried everything. I can click on the view button on the top of the screen and enter full screen, but I can't resize the window on the desktop. I just downloaded this program yesterday, so it is the latest version.

Here is a screen shot of the bug:

​https://www.dropbox.com/s/228q865pllllvyd/Screenshot%202016-05-13%2021.29.33.png?dl=0

Virtually all Mac programs have a Window menu option at the top of the screen that lets you choose 'Zoom', but FileZilla only has 'View', and 'View doesn't have the 'Zoom' feature that would fix this problem.

If the Window menu was added, this would fix the problem because we could manually zoom the window if the zoom button is hidden, like it is on my machine.

Thank you.

Status: Disconnected from server Status: Resolving address of g-ewebdesign.com Status: Connecting to 184.168.237.1:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Command: USER lmwedmund Response: 331 User lmwedmund OK. Password required Command: PASS Response: 530 Login authentication failed Error: Critical error: Could not connect to server

Several of us in our office upgraded to the latest and now it won't connect. I can access our Web/FTP server through Dreamweaver, a trial version of SmartFTP and Windows Explorer with no problems. I tried to uninstall FileZilla with RevoInstaller and tried to install an older version number that I know is working on another computer. No luck though. It still won’t connect for some reason, even though it works just fine on the older version on the other computer??? I have tried uninstalling and reinstalling the latest version, no joy. I have turned off all firewalls on both client and server, no joy. I have made sure our IP is not in the banned list, it's not.

when i am trying to download file via ftp i am receiving /key/hdspace.txt error

When you select several files in the Remote Site window and click on the option "Copy URL(s) to clipboard", only one of the URLs is copied.

FileZilla Client

Version: 3.18.0

Build information:

Compiled for: x86_64-apple-darwin15.5.0 Compiled on: x86_64-apple-darwin15.5.0 Build date: 2016-05-27 Compiled with: Apple LLVM version 7.3.0 (clang-703.0.31) Compiler flags: -g -O2 -Wall -g -std=gnu++14

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.4.10 SQLite: 3.11.1

Operating system:

Name: Mac OS X (Darwin 15.5.0 x86_64) Version: 10.11 CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi2 bmi2 Settings dir: /Users/alexandremoreteau/.config/filezilla/

German / Deutsch Fehlermeldung 12797 bei Starten des Programmes. Auch können keine Mehreren URLS in die Zwischenspeicher gelegt werden. Es wird anstelle einer vielzahl an Auswahlen immer nur die zuletzt ausgewählte Kopiert. Ich besonders Schlecht wenn man eine Vielzahl an URLS von Daten benötigt. Ich bitte das zu Korrigieren.

English / Englisch Error message 12797 when starting the program. Also no Multiple URLs can be placed in the cache. It is instead a variety of selections are only the most recently selected Copies. I particularly bad if you need a large number of URLs of data. I ask the to correct.

We have try to login more time our ftb but can't able to login ,we enter correct details but again getting error clout can't connect. so please find the issues

login details :host sthrielite..co.in username:dhilipkumar password :Dhilip#666

Hi All,

we need some changes to this client, it has been sometime now without any major features:

1- To be able to autoupdate the files. 2- Site manager search, the domains i have is more than 100, it would a good feature to be able to search the site manager for a specific domain or user 3- Security, i need to protect the site manager somehow, maybe a login and password? 4- Shortcuts, example when i have a site that can work via ssh, i can add the shortcut on the menu and it will execute the desired ex: terminal ssh root@*.com -u {user} -p {password}

This last request can replace all, to be able to add script to run on filezilla, just like mac scripts, we will handle the rest, simply a plugin feature.

Thanks in advance

FileZilla just downloaded update 3.19.0-rc1 (2016-06-20). This update has not yet been installed. It's just sitting there in my Downloads folder. However, ever since the download of the update, when I try to open the Site Manager, it gives me this very scary warning:

Detected newer version of FileZilla

The file 'C:\...\FileZilla\sitemanager.xml' has been created by a more recent version of FileZilla. Loading files created by newer versions can result in loss of data. Do you want to continue?

First of all, we cannot copy-paste the error message, which sucks. Second of all, the error message is obviously wrong. The newer version is only downloaded, not installed yet, so how on earth can we ever have used it to create a new sitemanager.xml?? Third, *why* would data loss ever ensue from *loading* a file?? Data loss normally happens when we save a file...

This error message is very scary, because it basically tells you: Either press No and be unable to use FileZilla, or press Yes and ignore this warning at your own peril...

Took me some time to gather the courage to just press Yes...

Now today it happened again and I'm pretty sure now that this dialog is actually just testing the presence of something silly (such as a folder existing, or reg key or whatever) and is not actually looking at which version is installed. Once I install the downloaded update, the error disappears..

Maybe save the version of FileZilla in the sitemanager.xml? And maybe just make reading/writing sitemanager.xml more robust? It's XML. There is no real reason it should ever go corrupt just because some flag was not saved or was saved but not recognized...

I'd say prio is high because this happens every time you guys push an update and it's giving a very scary warning message that talks of corrupted data...

Hello everyone~ What does " Multiple-level wildcards are not supported" means? I'm encountering this message when I'm attempting to delete a file the file is undeletable. But after all, I can delete the file when I access ftp with WinSCP with the same account, I can't find any information on the internet about this,It would very thankful for helping me!

Despite having updated it to 3.9.10.

No problem accessing it to view and download from !

Help please !

Regards, Otto.

Not only is the file not copied to the correct location, when calling this file using ajax, an old version of a completely different PHP file is accessed. If you are using pointers, I would look there. I confirmed this is a FileZilla problem by using a different FTP program (WinSCP) which correctly uploads and calls the file.

The program asks for but does not recognize it when I allow the use of a site with an old certificate. The program previously worked properly without asking for old certificate approval at all.

When downloading a file from server to local directory and the filename already exists, selecting the 'Rename' option displays a pop-up and allows a new file name to be entered.

However when submitting that new file name input by hitting 'Enter' or clicking on 'OK' to download using the new file name, no download occurs and the 'Target file already exists' window pops up again.

Essentially this function which has worked for years is now experiencing a bug issue in that it does not register the new file name and therefore does not download a renamed file.

Conversely though, when uploading a local file to the server, the Rename tool works as expected.

Не доступно подключение к папкам имеющие в именах файлов "(" , ")" "пробел" В более ранних версиях такой проблемы не было!

Not available connection folders with file names "(", ")", "blank" In earlier versions, this problem was not!

В настоящий момент:

FileZilla Client

Version: 3.20.0

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2016-07-27 Compiled with: x86_64-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -std=gnu++14

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.4.14 SQLite: 3.11.1

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 Settings dir: C:\Users\Sanetschka\AppData\Roaming\FileZilla\

Status: Resolving address of testsite.ms.gov Status: Connecting to 10.12.27.120:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Error: GnuTLS error -15: An unexpected TLS packet was received. Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of testsite.ms.gov Status: Connecting to 10.12.27.120:21... Status: Connection established, waiting for welcome message... Response: 220 msiasd01 FTP server (Version 4.2 Mon Jan 5 10:10:01 CST 2015) ready. Command: AUTH TLS Response: 234 Using authentication type TLSv1 Status: Initializing TLS... Error: GnuTLS error -110: The TLS connection was non-properly terminated. Status: Server did not properly shut down TLS connection Error: Could not connect to server

FileZilla Server 0.9.58 beta Copyright 2001-2016 by Tim Kosse (tim.kosse@…) https://filezilla-project.org/ Connecting to server testsite.ms.gov:14147... Trying to reconnect in 5 seconds Error: Connection to server lost... Connecting to server testsite.ms.gov:14147... Trying to reconnect in 5 seconds Error: Connection to server lost...

FileZilla is a great tool and I have seen the former arguments to refuse the improvement of Password Security and I understood them fully.

Yes, it is not possible to have a tool that is 100% secure. But the point is to have a tool that is as secure as possible with respect to functions and usability.

The argument against a master password was, that an intruder or malicious code could capture the master password entry "as easy as reading out the config with the stored passwords".

Is it really exactly the same? No, it isn´t.

The probability for an intruder or malicious code to successfully read out the config is much higher then the probability to stay undiscovered in the system (for hours, days or weeks) an then be able to successfully capture the entering of a master password and then read out the passwords.

So FileZilla would with a small improvement be much more secure than today!

So please think over the old convictions and PLEASE add a Master Password to FileZilla to protect the FTP-account passwords in a better way than today.

Symptoms: Log onto remote site : occasionally remote folders and file listings do not show - (remote panel completely blank). However, if the app window is re-sized, folders & file list suddenly shows correctly. Seemingly random, often initial login is ok - folders & files all listed. But click on a remote folder and the remote pane shows blank or is 'half filled' with listing.

Causes/triggers: Can't see a pattern / can't identify any particular folder attributes that trigger it.

Workaround: But always re-sizing of the Filezilla app will magically fix it (for that view only), folders & files will appear as normal. But go into another folder and the problem is back.

Very frustrating - v. difficult to work with this issue.

Tested across two machines, two different users: exactly the same problem - both users have same OS and Filezilla Versions.

When transferring files successfully the notification that tells you when ALL files have been transferred while you aren't in the FileZilla windows appears to be delayed and does not appear when the transfer has finished for another 1-2min.

The issue with this is that it locks my taskbar and I cannot use it until this notification is displayed.

Previously, Success message are shown in green and failure messages are shown in red, now all output log are shown in black. This only occurs in new version 3.21.0 and there's no way to change this in settings.

sir, my issue is filezilla server is not connecting on AIRTEL 4G Dongle network, (For web hosting of www.peumumbaiwou.com) On other networks working fine, here i Had attached error code details.

Status: Resolving address of peumumbaiwou.com Status: Connecting to 204.93.160.58:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: AUTH TLS Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of peumumbaiwou.com Status: Connecting to 204.93.160.58:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: AUTH TLS Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server