Custom Query (4044 matches)

If I type /tmp/ in Local site, it works fine. if I then type ~ in Local site, it says: '/tmp/~' does not exist or cannot be accessed.

It seems to look for ~ as a subdirectory of the current directory.

This is on Filezilla 3.7.3

Hi i looked through the tracker and it seems this was reported more than once but still not properly working.

The directory listing works with Internet Explorer but filezilla doesn't show all files.

I've attached the log. Sorry but i had to obfuscate my ftp host and the IP in the passive transfer.

When trying to FTP to Plesk 12.0 using Avtive or Passive mode we get the same issues.

Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Connected Status: Retrieving directory listing... Status: Server sent passive reply with unroutable address. Using server address instead. Command: LIST Response: 534 Protection level negotiation failed. Error: Failed to retrieve directory listing

The OS of the server is Server 2012.

When trying an alternative FTP client FTP Voyager we are able too FTP

Sorry, but I've been reporting this for a couple of years. It happens with every version of FZ, including the latest (30.10.1.1)

I recently installed the FTP Client. After this I had an application called "super optimizer" installed and running without my authorization or having installed this application knowingly myself. I can only surmise that it came with the Filezilla installation. It blocked access to my desktop by displaying a dark grey window which could not be closed.
Removing the Super Optimizer was difficult because it infiltrated a lot in the Registry. I like to install the FTP Server as well but hesitate to do so with the above experience.
Are you aware of this Super Optimizer possibly being installed with FileZilla free downloads?

I love FileZilla and have used this program for years. I've never had an issue until this latest batch of updates. The last version that works for me is 3.9.0.6. Anything after that installs and opens fine. However, when trying to connect to my saved website (as I always have in the past - changing nothing), I get the message that it is "Retrieving directory listing...". It sits there for almost 30 seconds, then quickly spools through a few commands and ends with the red "Error: Connection timed out" and "Error: Failed to retrieve directory listing". Nothing in the settings for the connection has been changed, yet every version after the one listed gives me this problem. I have resorted to downgrading to the last working build to be able to access my websites. What is happening and how can I fix it?

Hello,

I get a GnuTLS - 15 error on Windows 8.

Same trying on another PC under Windows 7 on the same network works.

FileZilla Client

Version: 3.10.2

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-03-02 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -msse -mfpmath=sse -O2 -g -Wall -g -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.3.13 SQLite: 3.8.8.3

Operating system:

Name: Windows 8.1 (build 9600), 64-bit edition Version: 6.3 Platform: 64-bit system

Log: 2015-03-13 08:38:19 3492 1 Status: Resolving address of ftp.car-pass.be 2015-03-13 08:38:19 3492 1 Status: Connecting to 85.112.27.122:990... 2015-03-13 08:38:19 3492 1 Status: Connection established, initializing TLS... 2015-03-13 08:38:19 3492 1 Error: GnuTLS error -15: An unexpected TLS packet was received. 2015-03-13 08:38:19 3492 1 Error: Could not connect to server 2015-03-13 08:38:19 3492 1 Status: Waiting to retry... 2015-03-13 08:38:24 3492 1 Status: Resolving address of ftp.car-pass.be 2015-03-13 08:38:24 3492 1 Status: Connecting to 85.112.27.122:990... 2015-03-13 08:38:24 3492 1 Status: Connection established, initializing TLS... 2015-03-13 08:38:24 3492 1 Error: GnuTLS error -15: An unexpected TLS packet was received. 2015-03-13 08:38:24 3492 1 Error: Could not connect to server

Any idea?

Kind regards

Status: Resolving address of server.kdimachine.com Status: Connecting to 50.76.186.9:21... Status: Connection established, waiting for welcome message... Status: Insecure server, it does not support FTP over TLS. Command: USER blixberg Response: 331 Please specify the password. Command: PASS Response: 530 Login incorrect. Error: Critical error: Could not connect to server

Upon upgrading to version 3.10.2 I receive the following message upon connecting:

"Server sent passive reply with unroutable address. Using server address instead."

The application then proceeds to time out after 20 seconds with this message:

"Error: Connection timed out after 20 seconds of inactivity

Error: Failed to retrieve directory listing."

This is my second attempt to do an upgrade to 3.10.2 - with identical results. I am returning to my previous version (3.8.0) which works fine. I will ignore the update offer which automatically pops up when I open the application - a bit of a nuisance!

Thanks

Hi

I got the error

sizeformatting_base.cpp(55): assert "size >= 0" failed in Format().

while uploading a file to my FTP server (overwriting an allegedly reported zero byte file).

FileZilla Client

Version: 3.10.2

Build information:

Compiled for: x86_64-pc-linux-gnu Compiled on: x86_64-pc-linux-gnu Build date: 2015-03-05 Compiled with: gcc (Ubuntu 4.9.1-16ubuntu6) 4.9.1 Compiler flags: -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wall -g -std=gnu++11

Linked against:

wxWidgets: 3.0.2 GnuTLS: 3.2.16 SQLite: 3.8.6

Operating system:

Name: Linux 3.16.0-32-generic x86_64 Version: 3.16

Best Regards, Ettore Atalan

After I'v udpated Filezilla with the latets version, I recieve a fatal error on all hostings.

How can I fix this?

Hello

I have recently upgraded to the latest version of FileZilla Client and it seems that there is a bug when it comes to uploading images. Since I had upgraded to the latest version, all images I upload to my server has been detected as corrupt. It was fine before the upgrade.

I did a test and when I use the server web uploader, the images are being detected fine and I can use them. When uploading with Filezilla, the images turn out to be corrupt.

Here is my version details:

FileZilla Client

Version: 3.10.3-beta2

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-03-16 Compiled with: x86_64-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.3.13 SQLite: 3.8.8.3

Operating system:

Name: Windows 8.1 (build 9600), 64-bit edition Version: 6.3 Platform: 64-bit system

Please fix this bug asap.

Thanks

The installer creates a Utilties folder in the start menu. Utilties is spelled incorrectly - it should be Utilities.

Hi,

Error Response: 550 The supplied message is incomplete. The signature was not verified. Error: File transfer failed Status: Retrieving directory listing of "/httpdocs"... Status: Directory listing of "/httpdocs" successful.

Settings on filezilla Protocol: FTP Encryption: Require explicit FTP over TLS Logon Type: Normal

Filezilla version: 3.10.0

Able to upload file on linux server but not on windows server.

Kindly help.

Regards,

After i installed the 3.10 version all my passwords was base64 encoded. Now i can't connect to any server in the list. Passwords are longer than before.

I downgraded to 3.9.0.6 but i always get the login error. Stato: Contenuto cartella letto con successo Stato: Risoluzione dell'indirizzo IP ftp.restaurant39.com in corso Stato: Connessione a 84.19.170.226:21... Stato: Connessione stabilita, in attesa del messaggio di benvenuto... Risposta: 220 ProFTPD 1.3.4c Server (ProFTPD) [84.19.170.226] Comando: USER restaurant Risposta: 331 Password required for restaurant Comando: PASS Risposta: 530 Login incorrect. Errore: Errore critico: Impossibile collegarsi al server

How can i retrieve my passwords? I'm trying with base64 decoder online. But it doesn't work. If i re-set passwords manually it works. The problem is that i don't have all my old password's clients. Anyone can help me?

Hi there,

My Wordpress site is down and Im not even able to access the Wordpress admin login page. I tried using FTP to access it, it wouldnt connect either. Im getting the following error in Filezilla. Request you to help me with this asap.

Status: Resolving address of xxxxxx.com Status: Connecting to 108.167.142.41:21... Status: Connection established, waiting for welcome message... Status: Insecure server, it does not support FTP over TLS. Command: USER xxxxx Response: 331 User xxxxx OK. Password required Command: PASS Response: 530 Login authentication failed Error: Critical error: Could not connect to server

Status: Resolving address of clev14.com Status: Connecting to 184.154.227.2:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Error: Received TLS alert from the server: Handshake failed (40) Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of clev14.com Status: Connecting to 184.154.227.2:21... Status: Connection established, waiting for welcome message... Response: 220-######################################################### Response: 220-Please upload your web files to the public_html directory. Response: 220-Note that letters are case sensitive. Response: 220-######################################################### Response: 220 This is a private system - No anonymous login Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: Received TLS alert from the server: Handshake failed (40) Error: Could not connect to server

Since updates from last few months FileZilla has been unable to connect to my web page

The Web page providers acknowledge that other FileZilla customers are experiencing the same problem and suggest I move to CuteFTP.

Are you aware of any problems connecting to these guys? The web site information is WebCity, They are in Parramatta and their phone number is 1300 655 590

Dear Support I have problem access with my Filezilla last version (3.10.3) , if I used the version (3.9.0.6) login OK

here is the error in my apps (3.10.3)

##################################### Status: Connecting to 202.169.44.161:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (202,169,44,161,128,177) Command: MLSD Error: The data connection could not be established: ECONNREFUSED - Connection refused by server

Using this version I have no problem uploading my files to the HP support ftp site

FileZilla Client

Version: 3.9.0.5

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2014-09-06 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.2 GnuTLS: 3.2.17 SQLite: 3.8.6

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64 bit system

Status: Adres bepalen van h1.usa.hp.com Status: Verbinden met 15.201.164.54:21... Status: Verbinding aangemaakt, welkomsbericht afwachten... Antwoord: 220------------------------------------------------------------------ Antwoord: 220- The HPRC FTP dropbox system is intended for Hewlett-Packard Antwoord: 220- company business with authorized partners and customers. The Antwoord: 220- terms and conditions for use of the system are published at Antwoord: 220- ​http://h1.usa.hp.com/ Antwoord: 220- Use of HPRC implies acceptance of these terms and conditions. Antwoord: 220- -- Thank you. Antwoord: 220------------------------------------------------------------------ Antwoord: 220 HPRC FTP Server System Opdracht: USER estio877 Antwoord: 331 Password required for estio877 Opdracht: PASS Antwoord: 230------------------------------------------------------------------ Antwoord: 230- HPRC F T P S e r v e r Antwoord: 230------------------------------------------------------------------ Antwoord: 230- Welcome to HP's ftp service. Use of this service requires Antwoord: 230- agreement with HP representatives and implies consent to the Antwoord: 230- Terms of Use (see ​http://h1.usa.hp.com/TermsOfService.html). Antwoord: 230- You are user #28 at Fri Apr 03 09:26:11 2015. Antwoord: 230------------------------------------------------------------------ Antwoord: 230- NOTE: If your FTP client implementation supports PASSIVE Antwoord: 230- mode, it is recommended that you enable it prior to Antwoord: 230- continuing. Antwoord: 230------------------------------------------------------------------ Antwoord: 230 User estio877 logged in Opdracht: SYST Antwoord: 215 UNIX Type: L8 Opdracht: FEAT Antwoord: 211-Features: Antwoord: AUTH TLS Antwoord: REST STREAM Antwoord: EPRT Antwoord: EPSV Antwoord: MDTM Antwoord: SSCN Antwoord: SIZE Antwoord: PROT Antwoord: CCC Antwoord: PBSZ Antwoord: 211 End Status: Server ondersteunt geen niet-ASCII tekens. Status: Verbonden Status: Mappenlijst ophalen... Opdracht: CWD / Antwoord: 250 CWD command successful Opdracht: PWD Antwoord: 257 "/" is the current directory Opdracht: TYPE I Antwoord: 200 Type set to I Opdracht: PASV Antwoord: 227 Entering Passive Mode (15,201,164,54,240,178). Opdracht: LIST Antwoord: 150 Opening BINARY mode data connection for file list Antwoord: 226 Transfer complete Status: Tijdzoneverschil van server berekenen... Opdracht: MDTM 2015-03-19T12_08_44Z()05d217c491830709a3fb8def343a0572.zip Antwoord: 213 20150319122635 Status: Tijdzoneverschillen: server - 0 seconden. Lokaal - 7200 seconden. Verschil: 7200 seconden. Status: Mappenlijst opmaken geslaagd Status: Adres bepalen van h1.usa.hp.com Status: Adres bepalen van h1.usa.hp.com Status: Verbinden met 15.201.164.54:21... Status: Verbinden met 15.201.164.54:21... Status: Verbinding aangemaakt, welkomsbericht afwachten... Status: Verbinding aangemaakt, welkomsbericht afwachten... Antwoord: 220------------------------------------------------------------------ Antwoord: 220- The HPRC FTP dropbox system is intended for Hewlett-Packard Antwoord: 220- company business with authorized partners and customers. The Antwoord: 220- terms and conditions for use of the system are published at Antwoord: 220- ​http://h1.usa.hp.com/ Antwoord: 220- Use of HPRC implies acceptance of these terms and conditions. Antwoord: 220- -- Thank you. Antwoord: 220------------------------------------------------------------------ Antwoord: 220 HPRC FTP Server System Opdracht: USER estio877 Antwoord: 220------------------------------------------------------------------ Antwoord: 220- The HPRC FTP dropbox system is intended for Hewlett-Packard Antwoord: 220- company business with authorized partners and customers. The Antwoord: 220- terms and conditions for use of the system are published at Antwoord: 220- ​http://h1.usa.hp.com/ Antwoord: 220- Use of HPRC implies acceptance of these terms and conditions. Antwoord: 220- -- Thank you. Antwoord: 220------------------------------------------------------------------ Antwoord: 220 HPRC FTP Server System Opdracht: USER estio877 Antwoord: 331 Password required for estio877 Opdracht: PASS Antwoord: 331 Password required for estio877 Opdracht: PASS Antwoord: 230------------------------------------------------------------------ Antwoord: 230- HPRC F T P S e r v e r Antwoord: 230------------------------------------------------------------------ Antwoord: 230- Welcome to HP's ftp service. Use of this service requires Antwoord: 230- agreement with HP representatives and implies consent to the Antwoord: 230- Terms of Use (see ​http://h1.usa.hp.com/TermsOfService.html). Antwoord: 230- You are user #28 at Fri Apr 03 09:26:39 2015. Antwoord: 230------------------------------------------------------------------ Antwoord: 230- NOTE: If your FTP client implementation supports PASSIVE Antwoord: 230- mode, it is recommended that you enable it prior to Antwoord: 230- continuing. Antwoord: 230------------------------------------------------------------------ Antwoord: 230 User estio877 logged in Status: Server ondersteunt geen niet-ASCII tekens. Status: Verbonden Status: Upload van P:\TEMP\EINLHlog\Performance_LHCLS-02_EINLHGRP-01_04_01_2015_12_00_31_CEST.csv starten Opdracht: CWD / Antwoord: 230------------------------------------------------------------------ Antwoord: 230- HPRC F T P S e r v e r Antwoord: 230------------------------------------------------------------------ Antwoord: 230- Welcome to HP's ftp service. Use of this service requires Antwoord: 230- agreement with HP representatives and implies consent to the Antwoord: 230- Terms of Use (see ​http://h1.usa.hp.com/TermsOfService.html). Antwoord: 230- You are user #29 at Fri Apr 03 09:26:39 2015. Antwoord: 230------------------------------------------------------------------ Antwoord: 230- NOTE: If your FTP client implementation supports PASSIVE Antwoord: 230- mode, it is recommended that you enable it prior to Antwoord: 230- continuing. Antwoord: 230------------------------------------------------------------------ Antwoord: 230 User estio877 logged in Status: Server ondersteunt geen niet-ASCII tekens. Status: Verbonden Status: Upload van P:\TEMP\EINLHlog\Performance_LHCLS-02_EINLHGRP-01_03_26_2015_12_04_15_CET.csv starten Antwoord: 250 CWD command successful Opdracht: TYPE I Opdracht: CWD / Antwoord: 200 Type set to I Opdracht: PASV Antwoord: 250 CWD command successful Opdracht: TYPE I Antwoord: 227 Entering Passive Mode (15,201,164,54,243,128). Opdracht: STOR Performance_LHCLS-02_EINLHGRP-01_04_01_2015_12_00_31_CEST.csv Antwoord: 200 Type set to I Opdracht: PASV Antwoord: 227 Entering Passive Mode (15,201,164,54,220,176). Opdracht: STOR Performance_LHCLS-02_EINLHGRP-01_03_26_2015_12_04_15_CET.csv Antwoord: 150 Opening BINARY mode data connection for Performance_LHCLS-02_EINLHGRP-01_04_01_2015_12_00_31_CEST.csv Antwoord: 150 Opening BINARY mode data connection for Performance_LHCLS-02_EINLHGRP-01_03_26_2015_12_04_15_CET.csv Antwoord: 226 Transfer complete Status: Bestandsoverdracht geslaagd, 112.756.464 bytes naar 81 seconden overgedragen Status: Upload van P:\TEMP\EINLHlog\2015-04-03T_6_20_44Z()05d217c491830709a3fb8def343a0572.zip starten Opdracht: PASV Antwoord: 227 Entering Passive Mode (15,201,164,54,221,111). Opdracht: STOR 2015-04-03T_6_20_44Z()05d217c491830709a3fb8def343a0572.zip Antwoord: 150 Opening BINARY mode data connection for 2015-04-03T_6_20_44Z()05d217c491830709a3fb8def343a0572.zip Antwoord: 226 Transfer complete Status: Bestandsoverdracht geslaagd, 32.295.279 bytes naar 23 seconden overgedragen Antwoord: 226 Transfer complete Status: Bestandsoverdracht geslaagd, 103.263.288 bytes naar 118 seconden overgedragen Status: Mappenlijst ophalen... Opdracht: PASV Antwoord: 227 Entering Passive Mode (15,201,164,54,206,149). Opdracht: LIST Antwoord: 150 Opening BINARY mode data connection for file list Antwoord: 226 Transfer complete Status: Mappenlijst opmaken geslaagd Status: Verbinding met server verbroken Status: Verbinding met server verbroken

======================

Using this version I cannot get the folder info on the ftp server. After a connection is made I get an "error" about the certificate used. I accept that message using the Ok button. After that the connection continues but then stops at the LIST command. This does not seem to be related to the certificate error but I am not sure. However, Filezilla 3.9.x has no problem using the site. In case it is relevant, the (Dutch) warning is: Het certificaat van de server is onbekend. Controleer het certificaat zorgvuldig om vast te stellen of de server vertrouwd kan worden.

It says the certificat is unknow. Should that be the certificate or the certificate chain as it seems to be a normal Verisign certificate. It is a RSA-SHA-1 2048bit certificate in case that is relevant.

FileZilla Client

Version: 3.10.3

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-03-29 Compiled with: x86_64-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.3.13 SQLite: 3.8.8.3

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

Status: Adres bepalen van h1.usa.hp.com Status: Verbinden met 15.201.164.54:21... Status: Verbinding aangemaakt, welkomsbericht afwachten... Status: TLS initialiseren... Status: Certificaat controleren.... Status: TLS-verbinding opgezet. Status: Server ondersteunt geen niet-ASCII tekens. Status: Verbonden Status: Mappenlijst van "/" ophalen... Opdracht: CWD / Antwoord: 250 CWD command successful Opdracht: PWD Antwoord: 257 "/" is the current directory Opdracht: TYPE I Antwoord: 200 Type set to I Opdracht: PASV Antwoord: 227 Entering Passive Mode (15,201,164,54,212,117). Opdracht: LIST Fout: Connection timed out after 20 seconds of inactivity Fout: Ontvangen van mappenlijst is mislukt

Greetings FileZilla Support Team Each time I upload a file I get the same little delay and message. I have uninstalled then installed the latest version with no effect. The programme did not used to do this. Here is the info you request:- message first, then details about version, systems etc.

Sincerely Graham Hawkes

Status: Resolving address of members.iinet.net.au Status: Connecting to 203.0.178.90:21... Status: Connection established, waiting for welcome

message... Status: Insecure server, it does not support FTP over TLS. Status: Connected Status: Retrieving directory listing of "/"... Status: Invalid character sequence received, disabling UTF-

8. Select UTF-8 option in site manager to force UTF-8.

Status: Directory listing of "/" successful

FileZilla Client

Version: 3.10.3

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-03-29 Compiled with: x86_64-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.3.13 SQLite: 3.8.8.3

Operating system:

Name: Windows 7 (build 7601, Service Pack 1),

64-bit edition

Version: 6.1 Platform: 64-bit system

Newest version hangs retrieving directory listing on several servers, but not all. Strangely, godaddy ftp works.

Normal access with other FTP programs like Cyberduck, so it's definitely FileZilla problem.

Pain in the butt asking for certificate approval every time. What's up with that?

This version is awful. Wish I could go back to previous.

I am also a victim of latest released version of Filezilla FTP Client 3.10.* bug which totally crashed/changed all of my FTP account informations (nearly 100 +) stored in the SiteManager.xml file encoded with base64 secure password mode from normal insecure mode and also changed each/every encryption mode to Use Explicit FTP over if TLS available.

I have seen lot of tickets raised by so many users regarding the latest release version bug and response/reply provided by Filezilla Development team for the tickets showing their irresponsibility, inability, incapability and inexperience in handling/ providing a solution for the reported issue. Also trying to escape from the issue without providing a solid/concrete solution.

Why wouldn't the process of automated backup of SiteManager file not being included for each and every updation of filezilla FTP client. If it is included or available which keeps avoiding many complications occur after updation and also easiest for the users to revert back to working version using the backup-ed version of sitemanager without spending so much time in research process after updation and waiting to hear an permanent solution from your end which never going to happen.

Status: Resolving address of ftp.augustabenelux.nl Status: Connecting to 46.44.148.131:21... Status: Connection established, waiting for welcome message... Response: 220 Titan FTP Server 10.01.1740 Ready. Command: AUTH TLS Error: Could not connect to server

Status: Waiting to retry... Status: Resolving address of ftp.augustabenelux.nl Status: Connecting to 46.44.148.131:21... Status: Connection established, waiting for welcome message... Response: 220 Titan FTP Server 10.01.1740 Ready. Command: AUTH TLS Error: Could not connect to server

==> "AUTH TLS" command is killing the login process on some FTP server when using "Quick Connect" on FileZilla. TLS should not be enforced on simple ​ftp:// login, or you should add a checkbox to activate/deactivate TLS, just next to the "Quickconnect" button. I don't know if this is a bug report or a feature request~ it is certainly a problem for inexperienced users.

==> Login works fine when: a) Using the FileZilla Site Manager and picking the "Only use plain FTP (insecure)" option b) Adding a network location within Windows c) Using Internet Explorer

Since upgrading to v3.10.3 Filezilla has become slower and slower when connecting to my two main servers

It connects and then hangs on 'waiting for welcome message' after about 40 seconds it then displays the directory - once connected, switching between the directories is rapid, but as soon as it needs to reconnect (or upload a file) there is that long delay.

Both servers are running Centos 5 Linux - I have tried using both normal FTP (unsecured) and FTP with TLS, neither make a difference.

The problem was exacerbated in v3.10.3 (the previous v3.10 was not quite as bad), so I have had to uninstall the program and revert to an earlier version

Rich

FileZilla Client

Version: 3.10.3

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-03-29 Compiled with: x86_64-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.3.13 SQLite: 3.8.8.3

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

Filezilla Version: 3.10.3 FTP Server: WS_FTP 7.6.2 Transfer protocol: FTP Transfer from this country to another country, there are about 9000 files and folders need to be transferred. All of them are pdf or office files. When I transferred half of them, Filezilla client stop transferring, I can use other FTP client to connect to the FTP server. I can do nothing except cancelling the task. It happens three times today.

I have switched to using ftpes with a server I connect to very often. I connect, can upload etc but all of a sudden, I see this in the logging: 09:32:01 Opdracht: PORT 192,168,188,31,252,91 09:32:01 Antwoord: 500 Illegal PORT command 09:32:01 Opdracht: PASV 09:32:01 Antwoord: 227 Entering Passive Mode (212,26,193,125,235,92). 09:32:01 Opdracht: MLSD 09:32:01 Antwoord: 150 Opening ASCII mode data connection for MLSD 09:32:01 Antwoord: 425 Unable to build data connection: Operation not permitted 09:32:01 Fout: Ontvangen van mappenlijst is mislukt

The ftp server has an IP in the 212 range so it is not local, the PORT command is something local but gets an 'Illegal PORT command' as response. Connection is then lost and I need to disconnect and reconnect to proceed.

i cant connect to server on win 8 i start Filezilla as admin and there are errors:

Status:	Ustalanie adresu IP dla serwer1370279.home.pl
Status:	Łączenie z 89.161.160.15:21...
Status:	Połączenie nawiązanie, oczekiwanie na wiadomość powitalną...
Status:	Inicjowanie TLS...
Błąd:	Otrzymano z serwera sygnał TLS: Handshake failed (40)
Błąd:	Nie można połączyć się z serwerem
Status:	Oczekiwanie na ponowienie...
Status:	Ustalanie adresu IP dla serwer1370279.home.pl
Status:	Łączenie z 89.161.160.15:21...
Status:	Połączenie nawiązanie, oczekiwanie na wiadomość powitalną...
Odpowiedź	220-Idea FTP Server v0.80 (serwer1370279.home.pl) [89.161.160.15]
Odpowiedź	220 Ready
Polecenie:	AUTH TLS
Odpowiedź	234 AUTH command successful.
Status:	Inicjowanie TLS...
Błąd:	Otrzymano z serwera sygnał TLS: Handshake failed (40)
Błąd:	Nie można połączyć się z serwerem

When I am connected FTP show error

Status: Connecting to 184.164.144.133:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server Status: Waiting to retry... Status: Connecting to 184.164.144.133:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 3 of 50 allowed. Response: 220-Local time is now 02:15. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server Status: Connecting to 184.164.144.133:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server Status: Waiting to retry... Status: Connecting to 184.164.144.133:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 5 of 50 allowed. Response: 220-Local time is now 02:17. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server

Large files (>about 200Mb) get to 100% download and then after a short time commence downloading again. The resultant downloaded file is exactly twice the size of the original file. This does not seem to happen with smaller files and happens with transfer settings at both Auto and Binary. I am using Version 3.10.3

When I retrieve from my server a very large file, in this case 4.42GB, filezilla reads the size wrong, ~260 MB. The download goes succesfully (I guess it doesn't stop until it reaches EOF) but I get the >100% message which is annoying since I dont know if its about to finish/ever going to.

Its not a server error becuase my android ftp client reads the size correctly.

Upgraded FileZilla Client to 3.10.3, starting receiving the following error:

Initializing TLS... Error: Received TLS alert from the server: Handshake failed (40) Error: Could not connect to server

FTP sites stopped connecting, but external sftp sites were connecting properly.

Uninstalled 3.10.3 and reinstalled 3.9. To remain secure, is there a fix/patch that will allow us to use 3.10? If not, is there another solution?

Hi,

We have tried the new version 3.11.0 on multiple PCs and receive the same error when trying to connect to outside server. Does connect on MAC. This is the list of messages we get when trying to connect:

Status: Resolving address of ftp.suncast.com Status: Connecting to 67.36.217.197:21... Status: Connection established, waiting for welcome message... Status: Insecure server, it does not support FTP over TLS. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current folder. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (67,36,217,197,32,48). Command: MLSD Error: The data connection could not be established: ENETUNREACH - Network unreachable Response: 150 Opening BINARY mode data connection for MLSD /.

Na update kan ik niet meer sites openen. Krijg de volgende melding De dataverbinding kan niet tot stand worden gebracht: ENETUNREACH - Netwerk onbereikbaar

Dears,

I install the new version of Filezilla 3.11.0.1, follow my configurations: ​https://gist.github.com/anonymous/ddc5d3f886d23c4c6d51

When i tried access an determinate site, using FTP, i had a problem ENETUNREACH - Network inaccessible, follow error: ​https://gist.github.com/anonymous/e1a9a6a44628c56ea1c7

Its is a bug? What i should do to solve this problem?

Thanks a lot!

Clients running KES10 MR1 upgraded to Filezilla 3.11.0.1 and were no longer able to access FTP sites. Disabling KES seemed to fix the issue temporarily. Downgrading to FZ 3.10.2 resolved the issue.

It's logged in successfully but 95 % times it's got failed to retrieve directory listing. The problem was not available till version 3.9.0.6.

The log - Status: Connecting to xxx.xx.xx.xx:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing of "/public_html"... Command: CWD /public_html Response: 250 OK. Current directory is /public_html Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (xxx,xx,xx,xx,162,66) Command: MLSD Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listing

I receive a Connection attempt failed with "EACCES - Permission denied".

I have changed nothing in my setup or login parameters.

Log says:

Status: Connecting to 116.213.5.25:21... Status: Connection attempt failed with "EACCES - Permission denied". Error: Could not connect to server

Version 3.11.0.1 Multiple remote file deletions fail after about 500 files - reports "Connection closed by server". These files on the server are all in one directory - they are approximately 50k jpg files.

I suppose this could be a "server problem", but this always worked ok in the past. Seems like this has happened for the past year. I keep updating versions, but the problem persists. Not a big deal, it just takes longer.

After install versions 3.11.00, 3.11.01 and 3.11.02 I receive the following error: Status: Connecting to 187.45.210.92:21... Status: Connection established, waiting for welcome message... Status: Insecure server, it does not support FTP over TLS. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (187,45,210,92,234,237). Command: MLSD Error: The data connection could not be established: ENETUNREACH - Network unreachable

If I remove the version 3.11.02 and install version

FileZilla_3.10.2_win32-setup.exe

all is Ok.

Hi,

I am facing this error since the latest update, everytime i connect to sever it displays XML error

First Pop-up { Title : Error Writing XML File Content : Could Not Write "C:\Users\Administrator\AppData\Roaming\FileZilla\recentservers.xml" : Failed To Write. }

Second Pop-up {

Title : FileZilla Error Content : 10:53:46 AM: can't open file 'C:\Users\Administrator\AppData\Roaming\FileZilla\recentservers.xml' (error 0: the operation completed successfully.) 10:53:46 AM: File 'C:\Users\Administrator\AppData\Roaming\FileZilla\recentservers.xml' couldn't be removed (error 0: the operation completed successfully.)

Export xml in Windows 7 and Imort in Ubuntu 14 results encoding violation

... following is LAST working version:

FileZilla Client
----------------

Version:          3.10.3

Build information:
  Compiled for:   x86_64-unknown-linux-gnu
  Compiled on:    x86_64-unknown-linux-gnu
  Build date:     2015-03-29
  Compiled with:  gcc (Debian 4.7.2-5) 4.7.2
  Compiler flags: -g -O2 -Wall -g -std=gnu++11

Linked against:
  wxWidgets:      3.0.3
  GnuTLS:         3.3.13
  SQLite:         3.8.8.3

Operating system:
  Name:           Linux 3.10.0-229.4.2.el7.x86_64 x86_64
  Version:        3.10

next version is no longer working (won't even launch):

[alexus@wcmisdlin02 bin]$ ./filezilla 
./filezilla: /lib64/libstdc++.so.6: version `CXXABI_1.3.8' not found (required by ./filezilla)
./filezilla: /lib64/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by ./filezilla)
[alexus@wcmisdlin02 bin]$

Hi, I am using version 3.11.02. With this recent set of updates, the time stamp that is posted when we post the file is wrong.

For example: I have a file that I posted on 06/18/15 at 2:11 pm central time zone and it says it was posted at 9:11 AM

Thanks, Cheryl

Version 3.10.x functions properly. Version 3.11.x does not function properly.

I am showing an incorrect time stamp on the remote server. The remote server shows the correct time as does my laptop. A report was processed at 6:30 pm which only takes a few moments to process and the time stamp shows a time of 2:30 pm.

когда работаешь по ФТП через файлзила на Виндовс8 то виндовс превращает код или некоторые русские буквы в кракозябры а на 7 и ХР все было нормально кто нибудь знает как решить эту проблему? звонил в тех-поддержку виндовс но они отказались помочь дескать это стороннее программное обеспечение(FileZilla) и мы за него не отвечаем

Bonjour,

Nous avions un site sur wix que j'ai supprimé. Le nom de domaine est sur ovh. J'ai totalement supprimé le site six et j'ai refait tout un site hébergé chez ovh. J'ai tout mis en ligne via filezilla. Pourtant, lorsque je tape le nom de domaine sur internet, c'est toujours une page wix qui apparait disant que le site a été supprimé. Je ne comprends pas pourquoi il ne prend pas le nouveau site. J'ai pris contact avec eux et ov, ainsi qu'avace vous pour voir ce qui se passe. ftp.brusselsiloveyou.com

Running FileZilla 3.12.0.2, Client is Windows 7 x64. When we attempt to log in with a valid credentials, we always get the following log. We can connect with other FTP client software, including Core FTP and Windows command-line FTP with no problems. There is a timeout delay after the message it is trying to get a directory listing of the start directory ("/array1").

Status: Resolving address of ftp.internal.inceptra.com Status: Connecting to <server-ip-address>:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing of "/array1"... Status: Server sent passive reply with unroutable address. Using server address instead. Command: MLSD Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listing Status: Disconnected from server Status: Resolving address of <our-ftp-hostname> Status: Connecting to <server-ip-address>:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing of "/array1"... Status: Server sent passive reply with unroutable address. Using server address instead. Command: MLSD Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listing

This has also happened on earlier versions.

Filezilla gives the message "Failed to retrieve directory listing" during connect. I can get around this by accessing my Cable Modem's Administrator function and changing my Firewall setting to "Minimum". I have to keep it at this level during the entire FileZilla session, through and including Disconnect.

Naturally, I do not appreciate having to leave myself vulnerable, even for a relatively short window. I'd prefer to keep the higher level set at all times.

The log, in its entirety, [minus the particulars of my site] reads:

Status:	Resolving address of [XXXXXXXXXX.XXX]
Status:	Connecting to [YY.YY.YY.YY]:21...
Status:	Connection established, waiting for welcome message...
Status:	Initializing TLS...
Status:	Verifying certificate...
Status:	TLS connection established.
Status:	Connected
Status:	Retrieving directory listing...
Command:	PWD
Response:	257 "/" is your current location
Command:	TYPE I
Response:	200 TYPE is now 8-bit binary
Command:	PASV
Response:	227 Entering Passive Mode ([YY,YY,YY,YY],197,52)
Command:	MLSD
Error:	Connection timed out after 20 seconds of inactivity
Error:	Failed to retrieve directory listing
Status:	Disconnected from server

... and it repeats once, except the second time, one line is different:

Command:	PASV
Response:	227 Entering Passive Mode ([YY,YY,YY,YY],197,46)

This is the only web-site to which I connect.

I do not know if this is a function of FileZilla in general, of my site in particular, or of my Site Manager configuration.

As to the latter, I do not have a Port specified. I don't know if the ":21..." refers to the default port, or what the ",197,52" or "197,46" means.

I would like to know if: (a) Specifying a particular Port number will clear up this problem. (And, if so, what port number?) (b) This is a "Bug" or a Feature", and (c) If the former, can it be fixed?

Thank you.

Filezilla fails to connect to an AIX system from a windows client. Tested cuteftp - same environment no issues.

Status: Connecting to 10.241.209.195:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Error: GnuTLS error -15: An unexpected TLS packet was received. Error: Could not connect to server Status: Waiting to retry... Status: Connecting to 10.241.209.195:21... Status: Connection established, waiting for welcome message... Response: 220 bono FTP server (Version 4.2 Thu Apr 17 02:03:14 CDT 2008) ready. Command: AUTH TLS Response: 234 Using authentication type TLSv1 Status: Initializing TLS... Error: GnuTLS error -15: An unexpected TLS packet was received. Error: Could not connect to server

I am able to login to a lot of servers with FZ later the version 3.9.0.6, but one server refuses access. I have tried all versions but it is only that old version that is able to login to that server. I do not own the server. Log files attached.

Getting this error ever since the last update and can not connect. Others in my office who did not do the latest update are able to connect just fine.

Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (98,139,135,37,210,236) Command: MLSD Error: The data connection could not be established: ENETUNREACH - Network unreachable Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listing

When I open a site that has a certificate problem, the Unknown certificate window pops up. But the "Always trust certificate in future sessions" checkbox is not enabled so the next time I open FileZilla, I have to verify the site again. This only started happening in 3.13.1

The site I am trying to access is ktlcanada.com Other sites seem to not do this.

FileZilla Client

Version: 3.13.1

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-08-24 Compiled with: x86_64-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -std=gnu++14

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.4.4 SQLite: 3.8.11.1

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx aes pclmulqdq Settings dir: C:\Users\farley.HOLLAND\AppData\Roaming\FileZilla\

I've been using FileZilla very happily for quite some time but since I've run the update today I can no longer connect to one of my servers. When I first tried to it came up with a warning message for me to check over server information (screenshot attached) which I said 'ok' to, then when I've gone to connect via site manager it just hangs, saying the site name at the top of FileZilla but "Not connected to any server" in the right hand pane. A colleague who's not run the update yet is still able to connect fine so I don't think it's an issue with our server.

Since I updated to the latest version (3.13.1), I could no longer connect to one of my FTP servers using sftp. There were no changes on the server side, and nothing out of the blue seems to happening.

This issue was also in the 3.13 version, though I did not report the bug at the time. The last working version that was able to connect to the server is 3.12.0.2.

Here is log from filezilla:

2015-08-30 15:30:13 16608 1 Status: Connecting to 139.255.47.238... 2015-08-30 15:30:13 16608 1 Response: fzSftp started, protocol_version=3 2015-08-30 15:30:13 16608 1 Command: open "user@139.255.47.238" 22 2015-08-30 15:30:13 16608 1 Error: Network error: Software caused connection abort 2015-08-30 15:30:13 16608 1 Error: Could not connect to server 2015-08-30 15:30:13 16608 1 Status: Waiting to retry... 2015-08-30 15:30:18 16608 1 Status: Connecting to 139.255.47.238... 2015-08-30 15:30:18 16608 1 Response: fzSftp started, protocol_version=3 2015-08-30 15:30:18 16608 1 Command: open "user@139.255.47.238" 22 2015-08-30 15:30:18 16608 1 Error: Network error: Software caused connection abort 2015-08-30 15:30:18 16608 1 Error: Could not connect to server 2015-08-30 15:30:18 16608 1 Status: Waiting to retry... 2015-08-30 15:30:23 16608 1 Status: Connecting to 139.255.47.238... 2015-08-30 15:30:23 16608 1 Response: fzSftp started, protocol_version=3 2015-08-30 15:30:23 16608 1 Command: open "user@139.255.47.238" 22 2015-08-30 15:30:23 16608 1 Error: Network error: Connection reset by peer 2015-08-30 15:30:23 16608 1 Error: Could not connect to server 2015-08-30 15:30:23 16608 1 Status: Waiting to retry... 2015-08-30 15:30:28 16608 1 Status: Connecting to 139.255.47.238... 2015-08-30 15:30:28 16608 1 Response: fzSftp started, protocol_version=3 2015-08-30 15:30:28 16608 1 Command: open "user@139.255.47.238" 22 2015-08-30 15:30:28 16608 1 Error: Network error: Software caused connection abort 2015-08-30 15:30:28 16608 1 Error: Could not connect to server 2015-08-30 15:30:28 16608 1 Status: Waiting to retry... 2015-08-30 15:30:33 16608 1 Status: Connecting to 139.255.47.238... 2015-08-30 15:30:33 16608 1 Response: fzSftp started, protocol_version=3 2015-08-30 15:30:33 16608 1 Command: open "user@139.255.47.238" 22 2015-08-30 15:30:34 16608 1 Error: Network error: Software caused connection abort 2015-08-30 15:30:34 16608 1 Error: Could not connect to server 2015-08-30 15:30:34 16608 1 Status: Waiting to retry... 2015-08-30 15:30:39 16608 1 Status: Connecting to 139.255.47.238... 2015-08-30 15:30:39 16608 1 Response: fzSftp started, protocol_version=3 2015-08-30 15:30:39 16608 1 Command: open "user@139.255.47.238" 22 2015-08-30 15:30:40 16608 1 Error: Connection attempt interrupted by user

I'm running on Mac OSX, and I don't recall having this problem with FileZilla on PC.

Please fix this ASAP or I'll have to abandon your fantastic, amazing project.

My project is very large and accesses many files on the server. When I backup the server via FileZilla, this limit causes me to miss backing up files without even knowing it.

Date: 10/8/2015 user: odesk host: edi.csnstores.com OS: Windows 7 x86 Ultimate Latest ver of Filezilla Description:

The 'Download' option whenever I right click a folder/file the 'Download' option is grayed out.

Filezilla has been compiling fine until recently. About two or three updates ago the Ubuntu compiles started to fail on the Latest SVN download 3.14.0 #7097 Error:

checking for LIBFILEZILLA... no configure: error: libfilezilla not found. make: * No targets specified and no makefile found. Stop. bash: ./filezilla: No such file or directory

GCC version: gcc (Ubuntu 4.9.2-0ubuntu1~14.04) 4.9.2

I also tried on Ubuntu 15.04 with a newer GCC and got the same problem. Do you guys compile for Ubuntu?

Server: Proftpd rel 1.3.5a on a CentOS 6 distro (x64) Client: Filezilla client 3.12.0.2 on a Ubuntu 15.10 distro (x64).

Sympthom: MLSD command is correctly issued, and give the correct results, when using GUI, but it fails when the same sequence of command are issued in raw mode, using Server->Enter custom command The sequence of command is listed in the logs file attached. It seems that the client (in passive mode) does not initiate the data connection after the MLSD command to the client. The same issue arise with Filezilla client 3.15 on a windows 7 SP1(x64). Regards

I have used another program (NetTerm) to successfully push files from Windows to Toshiba 4690 OS and it is able to maintain the original timestamp. I could push a file to 4690 OS and capture the session using Wireshark if that would help to determine how it's working for NetTerm (SecureNetTerm actually) and send that to you.

Here is the sequence to reproduce:

• r-click on file owned by another user, select Edit (I use Notepad++).
• File opens in editor
• Make changes, save and close file
• Window pops up on FZ saying File has changed / Upload this file back to the server? Checked box saying Finish editing and delete local file / click Yes
• Pop-ups asking to Overwrite on server, etc. Check Overwrite and click OK
• Same pop-up appears again, make same selections
• r-click on same file and select Edit to make additional changes, message box pops up saying

Title: Cannot view/edit selected file Message: A file with that name is already being transferred.

Data in status pane shows error: Command: put "C:\Users\user\AppData\Local\Temp\fz3temp-1\filename" "hosts_ta" Error: /path/to/file/on/server/filename: open for write: permission denied Error: File transfer failed

• If upon pop-up saying File has changed / Upload this file back to the server? And leave check box UNCHECKED, then get secondary pop up window

Title: Selected file already being edited Message: The selected file is already being edited

Action to perform (Reopen local file or Discard localo file then download and edit file anew). Select Discard, click OK = opens file for editing.

So either the upload checkbox is unclear as to the functionality to be performed - message/checkbox implies this will succinctly update file on server and remove temp file from FZ temp directory. But can't open again to edit more.

Hi. With de last versions, when i use Filezilla (after 1-2 minutes), MAC OS Crash and rebooted. If i configure Filezilla with Spanish Language, the icon of the toolbar are "artefacts". If i configure in English, all is right, but the crash continue...

I attached the Mac Report after crash and image from toolbar. Thanks u

Command: PASV Response: 227 Entering Passive Mode (64,71,35,56,164,131). Command: STOR CPI composite.png Response: 553 Could not create file. Error: Critical file transfer error Status: Disconnected from server

Used FZ for years. Newest update, windows 10, HO laptop one year old. FTP everyday-rarely an issue. Problem started right after your new update. REgular update file FTP fine but creating new image file (about 5 per day) no longer works. Have rebooted, done computer scan for malware, etc. No problems with servers that I can see.

Suddenly I can't upload any files with Google Verification Codes in them. I can upload anything else. Very bizarre. I just upgraded to this FileZilla version. I get a bubble at the bottom of the screen saying such and such number of files could not be transferred but it doesn't say why. This happens if I use the head-tag code in my index page or if I upload the html that google gives me.

Greetings , I have this annoying problem which came recently that it says:

Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] ---------- Response: 220-You are user number 47 of 500 allowed. Response: 220-Local time is now 12:35. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220 You will be disconnected after 3 minutes of inactivity. Command: USER a9944696 Response: 331 User a9944696 OK. Password required Command: PASS * Response: 530 Login authentication failed Error: Critical error: Could not connect to server

Im 100% sure that the username and password are correct. I tried from 3 different accounts and still nothing. My windows firewall is off , my antivirus aswell. I would really appriciate if you help me resolve this problem since i really need to do that !

Hello,

Using FZ for years, to manage web sites on hosted servers. With proper settings, FZ always preserved timestamps on upload as expected.

Each time FZ proposes to update, I do it. Currently I am on version 3.16.0 (last one). Today I do major updates and detects that timestamps on hosted server are NOT preserved. I have checked that setting IS active (see capture).

Of course, I can not control whether some change on hosted server is the origin of the issue.

What can I do for further investigation? I have activated log, but no data yet, I have to do some more uploads ...

I have been using FileZilla with <<Use explicit FTP over TLS if available>> with a server that does NOT support TLS/SSL encryption for many years. With the new version 3.16.1 last week apparently defaulting to plain FTP fails. If I change to <<Use only plain ftp (insecure)>> I get properly connected.

The server operator states: "Our FTP server does not (and never has) support TLS/SSL encryption. Also, our FTP server software has not been updated since Jan 2008, so I can confirm nothing on our end has changed."

Log files attached.

Instead of writing "dotfiles" would it not be better to write "hidden files"?

msgid "&Treat dotfiles as ASCII files"

msgid "&Treat hidden files as ASCII files"

msgid "Dotfiles are filenames starting with a dot, e.g. .htaccess"

msgid "Hidden files are filenames starting with a dot, e.g. .htaccess"

Hi,

Could you Please suggest the steps to recover my username and password details

My website: www.ExcelGuruji.com

Thanks Makk

Running on:

• Fully patched windows 7
• Browser: Chrome Version 50.0.2661.75 m (64-bit)
• FileZilla:3.17.0

On long FTP's with large number of files, the top window where the status of the FTP is provided will scroll over the Windows Menu bar. This happens if the window is left open for a long time and no other windows are brought over the FileZilla window.

To correct, minimize then maximize the FileZilla window and the menu bar is re-displayed with the FTP File status scrolling only to the size of the area it should.

To be clear:

• The Bar that shows the Host, Username, Passcode, Quickconnect prompts gets overwritten
• The Bar with the Action Icons above the previous bar gets overwritten
• The File, Edit, ... text bar does not get over written

I am unable to connect and now receiving these errors immediately after installing the latest update (I was able to connect just fine right before I did).

Status: Connecting to hugo.arbor-associates.com... Response: fzSftp started, protocol_version=5 Command: open "cpm@…" 22 Error: The first key-exchange algorithm supported by the server is diffie-hellman-group1-sha1, which is no longer secure. Aborting connection. Error: Could not connect to server Status: Waiting to retry... Status: Connecting to hugo.arbor-associates.com... Response: fzSftp started, protocol_version=5 Command: open "cpm@…" 22 Error: The first key-exchange algorithm supported by the server is diffie-hellman-group1-sha1, which is no longer secure. Aborting connection. Error: Could not connect to server Status: Disconnected from server

Status: Disconnected from server Status: Resolving address of g-ewebdesign.com Status: Connecting to 184.168.237.1:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Command: USER lmwedmund Response: 331 User lmwedmund OK. Password required Command: PASS Response: 530 Login authentication failed Error: Critical error: Could not connect to server

v3.16.1 gives an update for 3.17.0.1, even with the "check for update"-setting disabled. I am often abroad on a mobile pay-per-byte connection, and both dialog and mobile data costs pretty annoying.

I am aware of the general rule to install the latest version and try again before reporting the bug, which would ofcourse ' ' ' solve ' ' ' the problem as in not showing that there's a newer version.

My config (relevant sections):

<Setting name="Update Check">0</Setting> <Setting name="Update Check Interval">7</Setting> <Setting name="Last automatic update check">2016-05-16 23:01:59</Setting> <Setting name="Update Check New Version">nightly 2016-05-09 ​http://filezilla-project.org/nightlies/2016-05-09/x86_64-w64-mingw32/FileZilla_3_setup.exe 7088584 sha512 4c0b208c0d37cf4c0e24bea9dde489c0a6485692b2bf13b770769b4d7c7213d05af9110319d6f9ab73cdbd105bb95d3eb3fe60e69bd01307077d8c7bb98d23f4

release 3.17.0.1 ​http://downloads.sourceforge.net/filezilla/FileZilla_3.17.0.1_win64-setup.exe 6513888 sha512 4d5e5d426af9dd689cb8c070d528c849719dc18544de194475bf3a0f5e35f8c9d449749fb2074a68292579b267ee2b23d1e2b31bae20d7185aa44061cca6981c

3.17.0.1 (2016-05-09) ... I removed 'whatsnew' items for bug report brevity ... </Setting>

<Setting name="Update Check Check Beta">0</Setting>

Since Release 3.18.0 (actual release) in german there is a "no such file or Directory" answer if i try to get files with a german character (äöü) in the path or the name. If i rename the path without These characters, everything works fine.

After changing root drive into B:\ by commnad CWD, I faced Critical file transfer error when download a file.

Reproduction step

1. enter custom command "CWD B:\" (default A:\)
2. refresh for list B:\ drive
3. download one of files in B:\ drive root

Expectation downloaded successfully

Actual Action Critical file transfer error

Attaching log file

FileZilla just downloaded update 3.19.0-rc1 (2016-06-20). This update has not yet been installed. It's just sitting there in my Downloads folder. However, ever since the download of the update, when I try to open the Site Manager, it gives me this very scary warning:

Detected newer version of FileZilla

The file 'C:\...\FileZilla\sitemanager.xml' has been created by a more recent version of FileZilla. Loading files created by newer versions can result in loss of data. Do you want to continue?

First of all, we cannot copy-paste the error message, which sucks. Second of all, the error message is obviously wrong. The newer version is only downloaded, not installed yet, so how on earth can we ever have used it to create a new sitemanager.xml?? Third, *why* would data loss ever ensue from *loading* a file?? Data loss normally happens when we save a file...

This error message is very scary, because it basically tells you: Either press No and be unable to use FileZilla, or press Yes and ignore this warning at your own peril...

Took me some time to gather the courage to just press Yes...

Now today it happened again and I'm pretty sure now that this dialog is actually just testing the presence of something silly (such as a folder existing, or reg key or whatever) and is not actually looking at which version is installed. Once I install the downloaded update, the error disappears..

Maybe save the version of FileZilla in the sitemanager.xml? And maybe just make reading/writing sitemanager.xml more robust? It's XML. There is no real reason it should ever go corrupt just because some flag was not saved or was saved but not recognized...

I'd say prio is high because this happens every time you guys push an update and it's giving a very scary warning message that talks of corrupted data...

Despite having updated it to 3.9.10.

No problem accessing it to view and download from !

Help please !

Regards, Otto.

Status: Resolving address of pmsby.uiic.in Status: Connecting to 210.212.234.11:990... Status: Connection established, initializing TLS... Status: Verifying certificate... Status: TLS connection established, waiting for welcome message... Response: 220-FileZilla Server version 0.9.23 beta Response: 220 UIIC - PMSBY File Upload Server Command: USER dccb Response: 331 Password required for dccb Command: PASS * Response: 530 Login or password incorrect! Error: Critical error: Could not connect to server

The OS X FileZilla window name shows the FTP account description and the username as a window title. It seems that you're using URL-encoding, at least partially. E.g., a username containing the + character will instead display %2.

The file 'C:\Users\jmilton\AppData\Roaming\FileZilla\FileZilla.xml' could not be loaded. No document element found at offset 8987

For this session the default settings will be used. Any changes to the settings will not be saved.

This error first appeared when I upgrade to the previous version and still appears with the latest version as well.

Running win10 on 32 bit platform.

The program asks for but does not recognize it when I allow the use of a site with an old certificate. The program previously worked properly without asking for old certificate approval at all.

After upgrading from FileZilla Client version 3.19.0 to 3.20.0, a secured connection to a ftp server is no more possible. Status: Resolving address of lidame.lima-ftp.de Status: Connecting to 62.113.217.13:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Error: Received certificate chain could not be verified. Verification status is 66. Error: Could not connect to server

Version 3.20.0 added a new feature called "Stricter certificate chain validation to supplement the Tofu model". Maybe there is an bug or a side effect? Version 3.19.0 works pretty well.

In recent weeks, my picture remote file no longer has the rights accès.550 Can not change directory to / www / orion_images: Permission denied. I tried to change the attributes of the file in 705 unsuccessful. I am annoyed because on my website there is no longer displayed images. I hope there is a solution to edit the file. Thank you for the help you can give me.

constant error message Waiting to retry... Status: Resolving address of florencechefph.wordpress.com Status: Connecting to 192.0.78.13:21... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server

We have several computers that use FileZilla to transmit files via FTP to different sites. After the Windows 10 version update, we cannot connect to this one site. The computers that have not had the Version 1607 update applied, can still transmit to the site. Is it something at the other end or what.

I have attached the log file and the about information is also in the log file.

Thanks

I have some servers using SFTP to access them. After new update to Rev. 3.21.0 it stopped working. The problem occurs on Login that don't even have a chance to type Password, then Timeout occurs.

It was necessary to downgrade to previous released revision.

Thanks.

I was installing the latest update from my previous version and when it was finishing, it threw a .Net error message. Unfortunately I did think to grab what the previous version of FileZilla I was using.

The setup information is below.

FileZilla Client

Version: 3.21.0

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2016-08-23 Compiled with: x86_64-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -std=gnu++14

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.4.14 SQLite: 3.11.1

Operating system:

Name: Windows 10 (build 10586), 64-bit edition Version: 10.0 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi2 bmi2 Settings dir: C:\Users\(username)\AppData\Roaming\FileZilla\

See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.

Exception Text System.Runtime.InteropServices.COMException (0x8004010F): The attempted operation failed. An object could not be found.

at Microsoft.Office.Interop.Outlook.NameSpaceClass.GetDefaultFolder(OlDefaultFolders FolderType) at TeamViewerMeetingAddIn.AddIn.DoStartup() at TeamViewerMeetingAddIn.AddIn.CheckOnlineTimer(Object sender, EventArgs e) at System.Windows.Forms.Timer.OnTick(EventArgs e) at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

Loaded Assemblies mscorlib

Assembly Version: 4.0.0.0 Win32 Version: 4.6.1080.0 built by: NETFXREL3STAGE CodeBase: ​file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll

ManagedAggregator

Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 CodeBase: ​file:///C:/Program%20Files%20(x86)/TeamViewer/outlook/ManagedAggregator.DLL

TeamViewerMeetingAddIn

Assembly Version: 10.0.47484.0 Win32 Version: 10.0.47484.0 CodeBase: ​file:///C:/Program%20Files%20(x86)/TeamViewer/outlook/TeamViewerMeetingAddIn.DLL

System.Windows.Forms

Assembly Version: 4.0.0.0 Win32 Version: 4.6.1038.0 built by: NETFXREL2 CodeBase: ​file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll

System

Assembly Version: 4.0.0.0 Win32 Version: 4.6.1081.0 built by: NETFXREL3STAGE CodeBase: ​file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll

System.Drawing

Assembly Version: 4.0.0.0 Win32 Version: 4.6.1078.0 built by: NETFXREL3STAGE CodeBase: ​file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll

Microsoft.Office.Interop.Outlook

Assembly Version: 15.0.0.0 Win32 Version: 15.0.4569.1506 CodeBase: ​file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.Office.Interop.Outlook/15.0.0.0__71e9bce111e9429c/Microsoft.Office.Interop.Outlook.dll

System.Core

Assembly Version: 4.0.0.0 Win32 Version: 4.6.1038.0 built by: NETFXREL2 CodeBase: ​file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll

office

Assembly Version: 15.0.0.0 Win32 Version: 15.0.4849.1000 CodeBase: ​file:///C:/WINDOWS/assembly/GAC_MSIL/office/15.0.0.0__71e9bce111e9429c/office.dll

System.Configuration

Assembly Version: 4.0.0.0 Win32 Version: 4.6.1038.0 built by: NETFXREL2 CodeBase: ​file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll

System.Xml

Assembly Version: 4.0.0.0 Win32 Version: 4.6.1064.2 built by: NETFXREL3STAGE CodeBase: ​file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll

WindowsBase

Assembly Version: 4.0.0.0 Win32 Version: 4.6.1080.0 built by: NETFXREL3STAGE CodeBase: ​file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/WindowsBase/v4.0_4.0.0.0__31bf3856ad364e35/WindowsBase.dll

JIT Debugging To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled.

For example:

<configuration>

<system.windows.forms jitDebugging="true" />

</configuration>

When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.

Problem arose after updating to latest version of fz. No problems with previous versions.

When uploading an mp3 file, size 962040, only 212,992 transferred.

Tried with numerous different mp3 files with same result.

Log file:

Status: Resolving address of ftp.daretolivewithoutlimits.com Status: Connecting to 66.55.157.227:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Logged in Status: Starting upload of C:\Bryan Work\Audio Book\Motivational Minute\MP3 Files\With Music\MotivationalMinute.mp3 Command: CWD /daretolivewithoutlimits.com/wwwroot/MP3 Files Response: 250 CWD successful. "/daretolivewithoutlimits.com/wwwroot/MP3 Files" is current directory. Command: PWD Response: 257 "/daretolivewithoutlimits.com/wwwroot/MP3 Files" is current directory. Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (66,55,157,227,19,157) Command: STOR MotivationalMinute.mp3 Response: 150 Connection accepted Response: 550 can't access file. Error: File transfer failed after transferring 278,528 bytes in 1 second Status: Starting upload of C:\Bryan Work\Audio Book\Motivational Minute\MP3 Files\With Music\MotivationalMinute.mp3 Status: Retrieving directory listing of "/daretolivewithoutlimits.com/wwwroot/MP3 Files"... Command: PASV Response: 227 Entering Passive Mode (66,55,157,227,19,158) Command: MLSD Response: 150 Connection accepted Response: 226 Transfer OK Command: PASV Response: 227 Entering Passive Mode (66,55,157,227,19,159) Command: REST 212992 Response: 350 Rest supported. Restarting at 212992 Command: STOR MotivationalMinute.mp3 Response: 150 Connection accepted, restarting at offset 212992 Response: 550 can't access file. Error: File transfer failed after transferring 81,920 bytes in 1 second Status: Starting upload of C:\Bryan Work\Audio Book\Motivational Minute\MP3 Files\With Music\MotivationalMinute.mp3 Status: Retrieving directory listing of "/daretolivewithoutlimits.com/wwwroot/MP3 Files"... Command: PASV Response: 227 Entering Passive Mode (66,55,157,227,19,160) Command: REST 0 Response: 350 Rest supported. Restarting at 0 Command: MLSD Response: 150 Connection accepted Response: 226 Transfer OK Command: PASV Response: 227 Entering Passive Mode (66,55,157,227,19,161) Command: REST 212992 Response: 350 Rest supported. Restarting at 212992 Command: STOR MotivationalMinute.mp3 Response: 150 Connection accepted, restarting at offset 212992 Response: 550 can't access file. Error: File transfer failed after transferring 81,920 bytes in 1 second Status: Starting upload of C:\Bryan Work\Audio Book\Motivational Minute\MP3 Files\With Music\MotivationalMinute.mp3 Status: Retrieving directory listing of "/daretolivewithoutlimits.com/wwwroot/MP3 Files"... Command: PASV Response: 227 Entering Passive Mode (66,55,157,227,19,162) Command: REST 0 Response: 350 Rest supported. Restarting at 0 Command: MLSD Response: 150 Connection accepted Response: 226 Transfer OK Command: PASV Response: 227 Entering Passive Mode (66,55,157,227,19,163) Command: STOR MotivationalMinute.mp3 Response: 150 Connection accepted Response: 550 can't access file. Error: File transfer failed after transferring 294,912 bytes in 1 second Status: Starting upload of C:\Bryan Work\Audio Book\Motivational Minute\MP3 Files\With Music\MotivationalMinute.mp3 Status: Retrieving directory listing of "/daretolivewithoutlimits.com/wwwroot/MP3 Files"... Command: PASV Response: 227 Entering Passive Mode (66,55,157,227,19,164) Command: MLSD Response: 150 Connection accepted Response: 226 Transfer OK Command: PASV Response: 227 Entering Passive Mode (66,55,157,227,19,165) Command: REST 212992 Response: 350 Rest supported. Restarting at 212992 Command: STOR MotivationalMinute.mp3 Response: 150 Connection accepted, restarting at offset 212992 Response: 550 can't access file. Error: File transfer failed after transferring 81,920 bytes in 1 second Status: Starting upload of C:\Bryan Work\Audio Book\Motivational Minute\MP3 Files\With Music\MotivationalMinute.mp3 Status: Retrieving directory listing of "/daretolivewithoutlimits.com/wwwroot/MP3 Files"... Command: PASV Response: 227 Entering Passive Mode (66,55,157,227,19,166) Command: REST 0 Response: 350 Rest supported. Restarting at 0 Command: MLSD Response: 150 Connection accepted Response: 226 Transfer OK Command: PASV Response: 227 Entering Passive Mode (66,55,157,227,19,167) Command: STOR MotivationalMinute.mp3 Response: 150 Connection accepted Error: GnuTLS error -110: The TLS connection was non-properly terminated. Status: Server did not properly shut down TLS connection Error: Could not write to transfer socket: ENOTCONN - Socket not connected Response: 550 can't access file. Error: File transfer failed after transferring 278,528 bytes in 1 second Status: Starting upload of C:\Bryan Work\Audio Book\Motivational Minute\MP3 Files\With Music\MotivationalMinute.mp3 Status: Retrieving directory listing of "/daretolivewithoutlimits.com/wwwroot/MP3 Files"... Command: PASV Response: 227 Entering Passive Mode (66,55,157,227,19,168) Command: MLSD Response: 150 Connection accepted Response: 226 Transfer OK Command: PASV Response: 227 Entering Passive Mode (66,55,157,227,19,169) Command: REST 212992 Response: 350 Rest supported. Restarting at 212992 Command: STOR MotivationalMinute.mp3 Response: 150 Connection accepted, restarting at offset 212992 Response: 550 can't access file. Error: File transfer failed after transferring 81,920 bytes in 1 second Status: Starting upload of C:\Bryan Work\Audio Book\Motivational Minute\MP3 Files\With Music\MotivationalMinute.mp3 Status: Retrieving directory listing of "/daretolivewithoutlimits.com/wwwroot/MP3 Files"... Command: PASV Response: 227 Entering Passive Mode (66,55,157,227,19,170) Command: REST 0 Response: 350 Rest supported. Restarting at 0 Command: MLSD Response: 150 Connection accepted Response: 226 Transfer OK Command: PASV Response: 227 Entering Passive Mode (66,55,157,227,19,171) Command: REST 212992 Response: 350 Rest supported. Restarting at 212992 Command: STOR MotivationalMinute.mp3 Response: 150 Connection accepted, restarting at offset 212992 Response: 550 can't access file. Error: File transfer failed after transferring 81,920 bytes in 1 second Status: Retrieving directory listing of "/daretolivewithoutlimits.com/wwwroot/MP3 Files"... Status: Directory listing of "/daretolivewithoutlimits.com/wwwroot/MP3 Files" successful Status: Disconnected from server Status: Connection closed by server

When transferring files successfully the notification that tells you when ALL files have been transferred while you aren't in the FileZilla windows appears to be delayed and does not appear when the transfer has finished for another 1-2min.

The issue with this is that it locks my taskbar and I cannot use it until this notification is displayed.

I used FZ before with no problem. Since I changed computer and downloaded the latest FZ version I can no longer connect. I tried to connect to both of my sites with no success. I had changed the passwords to both the administration sites but my old FZ connected with the old (default) passwords. Now I tried to connect using both, old and new passwords but to no avail. I get different response for each site connection attempt (see the screenshots). I also tried to find answers in the internet to those problems but didn't manage to resolve the connection problem. Thank you for your time, Mike

For the second site (uniek-vakanties.eu) the login credentials are correct, I checked them myself (screenshot). But when I enter those credentials to the FZ, I still get the Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server message (second screenshot)

Previously, Success message are shown in green and failure messages are shown in red, now all output log are shown in black. This only occurs in new version 3.21.0 and there's no way to change this in settings.

I resolved the second site's login problem s well. I tried to login myself and worked fine (screenshot). But when entering the same login credentials into FZ I got the same response (screenshot). Therefore the problem is not in the login credentials but elsewhere.

FileZilla Client

Version: 3.21.0

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2016-08-23 Compiled with: x86_64-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -std=gnu++14

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.4.14 SQLite: 3.11.1

Operating system:

Name: Windows 10 (build 10586), 64-bit edition Version: 10.0 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi2 bmi2 Settings dir: C:\Users\Marshall\AppData\Roaming\FileZilla\

+++++++++++++++++++++

Why is the server path not showing the home/myservername/public_html/mywebsite like it used to and now only shows the public_html/mywebsite in remote file path

sir, my issue is filezilla server is not connecting on AIRTEL 4G Dongle network, (For web hosting of www.peumumbaiwou.com) On other networks working fine, here i Had attached error code details.

Status: Resolving address of peumumbaiwou.com Status: Connecting to 204.93.160.58:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: AUTH TLS Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of peumumbaiwou.com Status: Connecting to 204.93.160.58:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: AUTH TLS Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server

System randomly shuts down when using FileZilla.

One of my users upgraded FileZilla on her Windows PC to version 3.22.0.

When she tries to connect to an AIX server she gets the following message:

Status: Waiting to retry... Status: Resolving address of hostname Status: Connecting to IP_address:21... Status: Connection established, waiting for welcome message... Response: 220 damgapp1 FTP server (Version 4.2 Mon Dec 3 10:30:51 CST 2012) ready. Command: AUTH TLS Response: 234 Using authentication type TLSv1 Status: Initializing TLS... Error: GnuTLS error -15: An unexpected TLS packet was received. Error: Could not connect to server

Note: hostname and IP_address removed for security reasons

On my Windows PC, I'm running FileZilla 3.7.1.1 and have no problems connecting to the AIX server.

What changed between FileZilla 3.7.1.1 and 3.22.0. ?

since Fedora switched to building FileZilla against GTK3, the scroll buttons require repeated clicks to initiate a scroll of a single tick. 4-7 clicks required per tick in my testing, depending apparently on how much scrolling is available.