Custom Query (8183 matches)

You will must make that call but it doesn't "borrow" the copyrighted designs on the ​breitling replica watches, though inspecting a prospective ​tag heuer replica you should verify that brand names are really spelled properly.

Dear FileZilla Team:

I am getting an error while connecting to SFTP server from Filezilla, hope you could help me. Please find the error below:

"server host key did not match the signature supplied"

If I named a folder on my ftp server like "[Movie]",then I can't use FileZilla Client to acdcess it,it will give me an error message like "550 Unable to handle command". if I change the folder name to "Movie", then everything goes on well.

I just tried to upload my site files with Filezilla and everything uploaded correctly except my .js javascript files. I tried to research the problem online and found a lot of useless comments about the file type and ASCII or binary, but no instructions or help on actually overcoming the issue. Can I change some settings in Filezilla, i.e. change the way .js files are read, or is there some way to reformat my files before uploading?

Filezilla client version: 3.3.4.1 windows Ftp server: OpenVMS v7.1

always failure after transferring 2,016 bytes when download certain file from OpenVMS ftpserver. have try using both BIN and ASCII but still result the same error ('550 RMS read failure' )

Please help to investigate FTP log is on the attachment

My company (Flatirons Solutions Corp.) uses FileZilla for their hosting. I have had the same password for over a year now, and even signed in the other day, but for some reason my acct is locked out now? How do I unlock that? Thanks, Kate

Whenever I try to replace my index.html file and attached folders and such from updated ones in my documents folder, they don't overwrite.

The overwrite window gets brought up, I always pick: "Overwrite", and it doesn't replace it because the file size stays how it was before the file transfer.

I've tried uploading it to the root folder and then moving to the public_html folder but nothing works. Actually what I've noticed is that initially when it's uploaded, for a split second, it replaces, then the file size goes back to normal.

Even removing the index.html file and going to the site in my browser still seems as though the index file is still uploaded when it's not.

Any help would be greatly appreciated.

I am trying to download files and after 5 minutes connection is aborted. The files are about 1.5 GB. Previously the time estimate was 1.5 hours. Now it is over 8. This has been going on for about week. Possibly occuring after the leatest version was downloaded.

Connection established, waiting for welcome message...

Trace: CFtpControlSocket::OnReceive() Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 2 of 50 allowed. Response: 220-Local time is now 08:06. Server port: 21. Response: 220 You will be disconnected after 15 minutes of inactivity. Trace: CFtpControlSocket::SendNextCommand() Command: USER susan09 Trace: CFtpControlSocket::OnReceive() Response: 331 User susan09 OK. Password required Trace: CFtpControlSocket::SendNextCommand() Command: PASS * Trace: CFtpControlSocket::OnReceive() Response: 230 OK. Current restricted directory is / Trace: CFtpControlSocket::SendNextCommand() Command: SYST Trace: CFtpControlSocket::OnReceive() Response: 215 UNIX Type: L8 Trace: CFtpControlSocket::SendNextCommand() Command: FEAT Trace: CFtpControlSocket::OnReceive() Response: 211-Extensions supported: Response: EPRT Response: IDLE Response: MDTM Response: SIZE Response: REST STREAM Response: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; Response: MLSD Response: AUTH TLS Response: PBSZ Response: PROT Response: ESTA Response: PASV Response: EPSV Response: SPSV Response: ESTP Response: 211 End. Status: Connected Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Retrieving directory listing... Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/" is your current location Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: TYPE I Trace: CFtpControlSocket::OnReceive() Response: 200 TYPE is now 8-bit binary Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (174,120,31,220,34,92) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: MLSD Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Accepted data connection Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CFtpControlSocket::OnReceive() Response: 226-Options: -a -l Response: 226 51 matches total Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: CWD /.backup Trace: CFtpControlSocket::OnReceive() Response: 250 OK. Current directory is /.backup Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/.backup" is your current location Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (174,120,31,220,59,184) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: MLSD Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Accepted data connection Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CFtpControlSocket::OnReceive() Response: 226-Options: -a -l Response: 226 19 matches total Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Resolving address of forum..com Status: Connecting to 174.120.31.220:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 3 of 50 allowed. Response: 220-Local time is now 08:07. Server port: 21. Response: 220 You will be disconnected after 15 minutes of inactivity. Trace: CFtpControlSocket::SendNextCommand() Command: USER susan09 Trace: CFtpControlSocket::OnReceive() Response: 331 User susan09 OK. Password required Trace: CFtpControlSocket::SendNextCommand() Command: PASS * Trace: CFtpControlSocket::OnReceive() Response: 230 OK. Current restricted directory is / Status: Connected Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::FileTransfer() Status: Starting download of .sql Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: CWD /.backup Trace: CFtpControlSocket::OnReceive() Response: 250 OK. Current directory is /.backup Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: FileTransferSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: FileTransferSend() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: TYPE A Trace: CFtpControlSocket::OnReceive() Response: 200 TYPE is now ASCII Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (174,120,31,220,31,82) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: RETR (I have deleted the connection info name)120405.sql Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150-Accepted data connection Response: 150 1128366.0 kbytes to download Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CRealControlSocket::OnClose(10053) Error: Disconnected from server: ECONNABORTED - Connection aborted Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66)

With an account I connect to via SFTP, which has a section sign (§) in its password, I can not authenticate. If I remove just that single character from the password, it works though.

Authentication and usage works with other Client WinSCP; so it is very probably an issue of FileZilla.

when ı want to change upload folders permission ı noticed permission didn't change.

Earthlink changed "something" on the FTP process, and now I cannot connect to my webhosted domain using FileZilla 3.5.3

I can connect using Chrome/Firefox/Net2FTP. Using: Host=ftp.bizmarts.com User=bizmarts.com PW: {not disclosed} Port: 21

I made a theme using 24x24 icons (like others windows toolbars). Unfortunately the suported icons size are hardcoded in file : /FileZilla3/trunk/src/interface/themeprovider.cpp

It's can be a good idea to add support to all other formats or at least 20x20, 24x24 and 64x64 sizes.

I find the remote file search very useful but also restricting. For example, I often search for error logs and having several subdomains I end up with a long list.

Invariably I want to open a file to see, and often edit its contents but I can't do so without waiting for the search to finish (or stopping the search).

Could I suggest one or more of the following in order of preference:

1. To be able to click on a file in the list and read/edit it.
2. For the search results form not to be a fixed dialog so that one can perform other functions whilst it is running (for example open and edit a file from the main FZ screens).
3. Export a copy of the search results so that they can easily be referred to outside FZ (say in notebook)

I cannot connect to server, my IP Address was block by filezilla

Can we get a tool to count the total usage at an FTP site? I use comcast, and they limit me to 2 GB. However, they have no way to tell my my usage. So when I try to put something on their site, they truncate it to keep me below the 2GB limit. Since I maintain several folders, I cannot tell, using FileZilla, just how much storage I have used.

In the version 2.x of FileZilla, we have the functionnality of "SOCKS 4" in the Proxy.

Some Proxy like Microsoft TMG use only SOCKS 4 and not SOCKS 5, so we can't use FileZilla with this software and it is a missing.

Could you re-add this functionnality ?

Hi, I accidently deleted my public-html. How do I get it back?

Every time I tried to upload a file from the Local Site (my usb or local hard drive) to the Remote Site I have been denied access. Up until a couple months ago, this was never a problem and then one day the FileZilla client denied me access. It has been this way ever since then. I have tried downloading the client onto other computers and tried uploading from there. I am the only one who accesses FileZilla.

I checked the permissions of the remote file and when I checked the properties, the settings is on "777" but I'm still not allowed to move any local files into the remote files. Thoughts on how to proceed?

Using the 5/24 nightly - when I open a connection from the site manager toolbar button and choose to open in new tab, the server console area is not resized to account for the tab bar and it draws over the toolbar. Screenshot attached

I scanned my local server with nessus and got an interesting warning:

"Synopsis: It may be possible to obtain sensitive information from the remote host with SSL/TLS-enabled services. Description: A vulnerability exists in SSL 3.0 and TLS 1.0 that could allow information disclosure if an attacker intercepts encrypted traffic served from an affected system. TLS 1.1, TLS 1.2, and all cipher suites that do not use CBC mode are not affected. This script tries to establish an SSL/TLS remote connection using an affected SSL version and cipher suite, and then solicits return data. If returned application data is not fragmented with an empty or one-byte record, it is likely vulnerable. OpenSSL uses empty fragments as a countermeasure unless the 'SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS' option is specified when OpenSSL is initialized. Solution: Configure SSL/TLS servers to only use TLS 1.1 or TLS 1.2 if supported.Configure SSL/TLS servers to only support cipher suites that do not use block ciphers. Apply patches if available. See Also: ​http://www.openssl.org/~bodo/tls-cbc.txt ​http://vnhacker.blogspot.com/2011/09/beast.html ​http://technet.microsoft.com/en-us/security/bulletin/ms12-006 ​http://support.microsoft.com/kb/2643584 ​http://blogs.msdn.com/b/kaushal/archive/2012/01/21/fixing-the-beast.aspx "

I am not sure, if this issue is really a security issue. A possible solution should be, to disable TLS 1.0 support. I understand, that this is a compatibility problem, but perhaps you could add an option to disable it. So everybody can decide, if he wants compatibility or more security. I am running Filezilla Server Version 0.9.41 with FTP over SSL/TLS enabled.

Hello! Please just forgive me for my English.

When you connect to any FTP, is the imposition of one screen to another. Version of the most recent. Windows 7 x64.

I am very impressed with your FTP client, but unfortunately these errors interfere with work. I suspect that it's not just me that. I would be very happy if you fix them. Best regards, Maxim!

I received a verification email which I have activated, however I have not received an email with details of the hostname and port on.. I have checked my spam but nothing has come through.

Hello, i have a bug which i have to admit, is annoying me alot!

When my server disconnects me after inactivity (SFTP connection) i get the "Status: Disconnected from server" and all, but if i then click on a file or folder, such as ".." it will go to "Command: cd ".."" and not first reconnect to the server and then go to that folder.

A temporary fix is to press "Disconnect from current server" button, then press it again.

On Windows platforms newer than WinXP besides SetFilePointer+SetEndOfFile preallocation method which fills required disk space with zeros which might take a lot of time in case of a very large file, there is another literally instant function: SetFileValidData (see MSDN), it just claims disk space leaving intact whatever data there was.

Despite common belief that fragmentation isn't an issue, it's quite the opposite - 1+GB files downloaded in such applications as FileZilla Client which doesn't preallocate disk space, are extremely slow to copy and work with when mounted and impose absolutely unnecessary huge load on HDD due to a lot of disk seeks.

Apparently only a few win32 ftp clients can preallocate space and none of them uses SetFileValidData. Out of about 20 most popular ftp clients I've tested, only Flashget and NetTransport had the feature. Actually I've searched all files on my PC and out of hundreds of small and large win32 apps that constantly deal with creation of files, large and small, only VirtualDub and uTorrent use SetFileValidData, also the latter allows user to select whether he prefers instant preallocation, complete with zeroing or none of the two.

There was a similar ticket (#1486) 7 years ago and now it's already 2012 but FileZilla Client still doesn't preallocate space.

Would be nice to have an option to upload files in upper or lower case.

Some computer systems are case sensitive; that is; *.JPG are not the same as *.jpg and these files are not recognized.

I have used other FTP programs that have this handy option.

Original file name: "RT cycles 1.csv" FileZilla Server reported the following error: (000088)6/14/2012 8:32:13 AM - nicholas (127.0.0.1)> SIZE /LWO 16349 Error Files/RT cycles 1.csv (000088)6/14/2012 8:32:13 AM - nicholas (127.0.0.1)> 550 File not found (000088)6/14/2012 8:32:13 AM - nicholas (127.0.0.1)> RETR /LWO 16349 Error Files/RT cycles 1.csv (000088)6/14/2012 8:32:13 AM - nicholas (127.0.0.1)> 550 File not found (000088)6/14/2012 8:32:13 AM - nicholas (127.0.0.1)> CWD /LWO 16349 Error Files/RT cycles 1.csv (000088)6/14/2012 8:32:13 AM - nicholas (127.0.0.1)> 550 CWD failed. "/LWO 16349 Error Files/RT cycles 1.csv": directory not found.

FileZilla operated correctly when the space was removed - ie from "RT cycles 1.csv" to "RT cycles1.csv"

Status: Resolving address of files4.cyberlynk.net Status: Connecting to 66.185.19.4:21.. Error: Connection timed out Error: Could not connect to server

When doing drag & drop upload / download(i.e. from the left file list to right file list or vice versa) in Mint Linux 12, Cinnamon 1.4, a segmentation fault is thrown and the application crashed.

On three occasions now I have gotten into a supposed drag state in the server tab with no intention and no cue (that I noticed) that I was in that state. The first time a whole document root and thus its site "disappeared" for a while. After finding it, I assumed I must indeed have dragged it into the adjacent folder in haste with a sloppy-slidy click or double-click, because I was rushing half an hour before a big demo.

But now I see it is possible somehow to unknowingly initiate a drag state (by sloppy click?), then scroll around for a while (many seconds) with no mouse button held, then click on a folder and Filezilla "drops" or attempts to drop the folder it thought you were dragging. At least in the server tab. I'm reluctant to experiment too much with trying to duplicate this.

I haven't been experiencing this in any other application.

It's dangerous enough that I looked all around for an option to disable dragging of files or folders in Filezilla but apparently it can't be disabled.

I really like FZ but now I'm very nervous I'll damage a site again without noticing. This third time, the only reason it didn't happen was because the folder I clicked was a subfolder of -- again -- the document root. A less obvious moved folder could go unnoticed.

FileZilla Client

Version: 3.5.3

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2012-01-08 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 2.10.4

Operating system:

Name: Windows XP (build 2600, Service Pack 3) Version: 5.1 Platform: 32 bit system

Hi,

I have been trying to logon to FileZilla since friday but I keep getting the message "ETIMEDOUT - Connection attempt timed out". My host is 202.125.161.11:21.

I update to the most recent version but am still receiving the message.

Could you please look into what is hapenning.

THANK YOU

I am using Windows 7 Ultimate, English version and latest version of FileZilla, FileZilla Client. Suddenly, I have one folder I cannot delete. I can rename it, but not delete it. We have tried from several computers in different locations. Here is the full information below as requested.

Version: 3.5.3 Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2012-01-08 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 2.10.4

Operating system:

Name: Windows NT 6.1 (build 7601, Service Pack 1) Version: 6.1 Platform: 64 bit system

This is the folder I cannot delete: ​ftp://pbllp@ftp2.modernguesthouseliving.com/Staff_Files/Can't%20Delete

We all get the message "critical error" "could not connect to server" Have the newest version. What is the problem? Chuck

In the settings "File doubleclock action" and "Dir doubleclock action" should be the word doubleclock replaced with doubleclick.

Filezilla version: 3.5.3

I am connecting to two server over LAN. When I queue and process file downloads from both servers concurrently in a FZ client session, the client freezes and must be force-closed.

The servers are slightly unusual in that they are embedded servers in Topcon GPS receivers. The server software enforces a strict limit of one connection per receiver. I have configured this limitation in the Site Manager (Limit Number of Simultaneous Connections = 1).

If a subsequent connection is attempted, the receiver will return a 530 error message and disconnect. This behavior has been observed using Topcon NetG3A receivers as well as Topcon GB1000.

I have tried this using multiple client PCs (Asus netbooks, Dell desktops, laptops) using various operating systems from Vista to XP to Windows 7.

By contrast, if I open two separate filezilla client instances, and start a concurrent queue of downloads in each of these separate filezilla instances, the downloads work just fine. So this seems to point to some kind of race condition, or perhaps a connection isn't getting closed in the right order, when downloading within the same filezilla instance.

Toolbar disappears after site connection.. I toggle "Toolbar" and it reappears..

FileZilla Client

Version: 3.5.3 Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2012-01-08 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 2.10.4

Operating system:

Name: Windows NT 6.1 (build 7601, Service Pack 1) Version: 6.1 Platform: 64 bit system

• -

Hi! I have FileZilla 3.5.3, and it uses GnuTLS library (​http://www.gnu.org/software/gnutls/gnutls.html) to provide the secure connection. Since their where several improvements made on the GnuTLS, since 2.10.4 version (the one currently present in FileZilla 3.5.3) is it possible to upgrade to the most update 2.12.20, or to the 3.0.20 (if it doesn't brake things of course).

I request this because it seems to have problems connecting to the ftp.servage.net servers (after sending many files, like 700 of them) and seems to be something related to the GnuTLS... I'm not completely sure, but in the logs GnuTLS seems part of the problem.

After 2 days of repairing a hacking attack to some of my Internet-Domains I found out that filezilla stores my passwords in plain text by default. So I try to avoid this for future now. I found out that there is a Setting "Kiosk Mode" to control this behaviour. But when I try to set Kiosk Mode to 1 or 2 instead of 0, my Client seems to ignore this setting. I uninstalled the old version of Filezilla. I installed the current version Filezilla 3.5.3 from scratch Same behaviour.

Do you have any idea, what I could do else to make working my filezilla-client installation accepting my overridings of the default-settings (especially this hacker-friendly password-default-option) by using my fzdefaults.xml, which I located in .../Documents and Settings/<username>/Application Data/Filezilla/ ?

See the content of my fzdefaults.xml below or the full file in attachment ... <FileZilla3>

<Settings>

<Setting name="Config Location">$SOMEDIR/filezilla/</Setting> <Setting name="Kiosk mode">2</Setting> <Setting name="Disable update check">0</Setting>

</Settings> <Servers>

<Server>

<Host>ftp.gnu.org</Host> <Port>21</Port> <Protocol>0</Protocol> <Type>0</Type> <Logontype>0</Logontype> <User>anonymous</User> <Pass>someone@…</Pass> <TimezoneOffset>0</TimezoneOffset> <PasvMode>MODE_DEFAULT</PasvMode> <MaximumMultipleConnections>0</MaximumMultipleConnections> <EncodingType>Auto</EncodingType> <Comments></Comments> <LocalDir></LocalDir> <RemoteDir></RemoteDir>Primary GNU download server

</Server>

</Servers>

</FileZilla3>

Like other users, I cannot delete files using a Mac. "Files" are files added from the left hand part of the FileZilla screen (which shows my folders and my desktop, including all the files I want to build into the website) by dragging and dropping them into the right hand part of the screen after I've chosen the specific place I want to save them (in my case, a file called "NewTest" in "Public HTML". (FileZilla doesn't give this screen a name; it's the one that has username, password, and port on the top.)

In the course of the project, we have uploaded various files from preliminary versions of the website we're building. They have served their purpose, and leaving them on the system will now cause only chaos and confusion. So they need to be deleted, and then replaced by newer files.

Now, I am working with a html/web guru who uses a Windows machine, and she deletes files from FileZilla very easily, by highlighting them and pressing the delete key.

That, however, does NOT work with my Mac (a MacBook Pro running MacOS 10.5.8) and a Safari browser. At this URL

​http://forum.filezilla-project.org/viewtopic.php?f=2&t=12541&hilit=deleting+files

another Filezilla user reports the same problem with their Mac, and their experience is the same as my own. In fact, I ran down the same list of possibiliities and workarounds, and none of them work.

Highlighting and pressing delete does NOT delete FileZilla files with a Mac.

1. Can you tell me how to delete files using a Mac?
2. I will have to migrate to another company if FileZilla can't solve the problem. Of course, I'd rather not do that, but we can't work with a non-functional server.

Timothy Perper perpcorn@… (I am a paying customer -- we've paid FileZilla for website access,)

I've set up my server to enable implicit FTPS (port 990) but the unsecure connection method is still accepted too.

When I try to connect to the server using unencrypted method, everything works fine, no matter if I'm local or internet originated. But for FTPS, it's different. From local network, everything is fine, from the internet side the connection goes as far as switching to passive (PASV) mode. From there on, connection hangs. I checked the logs on my client and believe to know the cause (but not the solution): Upon switching to PASV mode, my client is given the local IP-address instead of the real 'outside' ip-address. It is as if the server suddenly believes this connection to be on the local net and thus not send the 'real' address.

I.o.w. when using FTPS and PASV mode enabled for all but local connections, Filezilla server is still sending the local ip-address together with the port nr to use for the passive connection to an external client trying to connect. This isn't so for unsecure connections and therefore I believe this to be a bug.

Hebrew is shown reverse

Hebrew is the opposite of increases in the down line

See photo

This issue has been discussed on the forums in several threads, but I don't think a formal bug report has ever been filed.

I don't think we know the exact cause or the exact repro steps, but sometimes Filezilla Server will report the wrong timestamp for files in the LIST reponse. The incorrect timestamp is always 7-8 minutes behind the real timestamp.

This thread in the forum has some more discussion and verification that others have hit this problem too:

​http://forum.filezilla-project.org/viewtopic.php?f=6&t=21800

This post in particular includes some specific timestamps that trigger the issue:

​http://forum.filezilla-project.org/viewtopic.php?f=6&t=21800#p84916

Good morning

I am having trouble logging onto to Filezilla. I am using the following data :

Address: www.basingstokephotographicstudio.co.uk User: basingstokephotographicstudio.co.uk Password: Portrait2011

The information above is what I am using, could some one please confirm I am using the correct data so I can update my website.

Kind Regards

Bill

Status: Connecting to 207.191.225.160:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 6 of 50 allowed. Response: 220-Local time is now 17:47. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER propertyupload@… Response: 331 User propertyupload@… OK. Password required Command: PASS Response: 230 OK. Current restricted directory is / Command: SYST Response: 215 UNIX Type: L8 Command: FEAT Response: 211-Extensions supported: Response: EPRT Response: IDLE Response: MDTM Response: SIZE Response: MFMT Response: REST STREAM Response: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; Response: MLSD Response: AUTH TLS Response: PBSZ Response: PROT Response: ESTA Response: PASV Response: EPSV Response: SPSV Response: ESTP Response: 211 End. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (207,191,225,160,18,31) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing Status: Connecting to 207.191.225.160:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 7 of 50 allowed. Response: 220-Local time is now 17:48. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER investin Response: 331 User investin OK. Password required Command: PASS Response: 230 OK. Current restricted directory is / Command: SYST Response: 215 UNIX Type: L8 Command: FEAT Response: 211-Extensions supported: Response: EPRT Response: IDLE Response: MDTM Response: SIZE Response: MFMT Response: REST STREAM Response: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; Response: MLSD Response: AUTH TLS Response: PBSZ Response: PROT Response: ESTA Response: PASV Response: EPSV Response: SPSV Response: ESTP Response: 211 End. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (207,191,225,160,115,220) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing Status: Connecting to 207.191.225.160:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 7 of 50 allowed. Response: 220-Local time is now 17:49. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER investin Response: 331 User investin OK. Password required Command: PASS Response: 230 OK. Current restricted directory is / Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (207,191,225,160,167,184) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

Hello :)

at frist - sry for my bad english but i will try my best.

if i connect to my webspace und edit a file with my default editor, after edit i save this file.

is it possible that this file will automatical upload back to my webspace without any questions like "Realy upload this file?"

My Operatin System is Windows 7 and Mac OSX Lion

I am a total noob, please help, Filezilla was setup for me and I have used it without problems for some months.

I followed a promp to upgrade to 3.5.3 from 3.5.2, As it said none of my settings would be altered I thought it would be fine.

Now when i go to log onto a server I get an error saying.....

Status: Initializing TLS... Error: GnuTLS error -12: A TLS fatal alert has been received. Error: Could not connect to server

I have found my settings for the server, port, port, login, password etc and they are all fine.

PLEASE HELP!!!!!

I've updated a local file and even after hitting f5, right click and 'refresh' and closing and reopening filezilla, it's caching the old version of the file. I've checked in file explorer and it's seeing the new version, but filezilla is trapped in the past!

The only way I can upload my new file is to save it in a different location on my harddrive and then upload it.

version: 3.5.3

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2012-01-08 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

when i right click on the file the download option was diasble, can any one help how to enable the download option to download the files into my PC from server.

Annoyance level bug. I connect from a machine in PDT Timezone, to a server (Linux, CentOS) in same PDT Timezone. FileZilla shows my times are an hour different. Both machines report they are PDT. For some reason, I can see at the beginning of the session this calculation (which is wrong):

Status: Calculating timezone offset of server... Command: mtime "alp3" Response: 1330985224 Status: Timezone offsets: Server: -28800 seconds. Local: -25200 seconds. Difference: 3600 seconds.

My Windows 7 Professional machine clearly states it is PDT, as well my Linux server reports the same.

File transfer was not a problem except for my webpage displaying Asian characters instead of the proper text and links.

When I test to connect to the server it writes : Host does not exist AND Can not connect to server

But why ? is it a bug ?

Hello,

I find useful to have one more level of flexibility in the file exist action options: "overwrite if newer else resume if sizes differ".

I modified the source code (starting from svn rev. 4716) in that direction and I'm submitting the related patch for the convenience of all the other users.

Cheers, Paolo.

With FileZilla 3.5.3, I can't download a file with 0 bytes.

Messages/Logs:

Statut : Résolution de l'adresse de xxx.yyy.fr Statut : Connexion à aaa.bb.cc.d:21... Statut : Connexion établie, attente du message d'accueil... Réponse : 220 Serveur de mise a jour des pages perso AAA version [Apr 27 2011 11:43:55] Commande : USER login Réponse : 331 Password required for login. Commande : PASS Réponse : 230 User login logged in. Statut : Connecté Statut : Démarrage du téléchargement de /site-v1/Flash/wordpress/wp-includes/js/codepress/engines/older.js Commande : CWD /site-v1/Flash/wordpress/wp-includes/js/codepress/engines Réponse : 250 CWD command successful. Commande : TYPE A Réponse : 200 Type set to A Commande : PASV Réponse : 227 Entering Passive Mode (aaa,bb,cc,d,96,169). Commande : RETR older.js Réponse : 150 Opening ASCII mode data connection for older.js Réponse : 226 Transfer complete. Erreur : Délai d'attente expiré Erreur : Echec du transfert du fichier

It works good with "Allway Sync" .

Currently, if you specify multiple "--site" command line parameters, FileZilla opens only the last one.

It would be great if FileZilla could support multiple "--site", opening a new tab for each one.

Thank you

Michele

Hi

Thank you for this great product.

I would like to have this feature add to the application. The feature required is to allow us to stop processing the queue once the current upload/download finish.

Enter my host name, user name and password, but won't connect. I recently had to buy a new PC as my other one crshed. It's been a few months since I've tried to use it. I intended to login and then download my wordpress files to my new PC. Can't seem to connect. Im a newbie so please let me know what is needed in very layman's terms. Host name is proxima-centauri.dreamhost.com User helimom PW iwtbaw2011 Port 21

Generally happy with FZ (3.5.3) but I get random corruptions on upload of PHP files to server - and then even if I delete the server file and re-upload it is still corrupt. Using another technique - eg uploading via the server's cPanel File Manager - and it works OK

Add the ability to save and restore opened tabs, and possibly modify command line argument "--site" so that it was possible to connect to multiple servers in a separate tabs.

After no problems for years using FZ daily, over the past 2 weeks I've had consistent problems downloading files using SFTP/SSH from my shared hostgator server. During batch downloading, it always downloads a few files, then posts the "software causing abort" (or words to that effect) during about the 4th file.

Happens every time now over past 2 weeks. Never happened in the past.

Making all in . make[1]: Entering directory `/home/slemmens/Downloads/software/filezilla-3.5.3' make[1]: Nothing to be done for `all-am'. make[1]: Leaving directory `/home/slemmens/Downloads/software/filezilla-3.5.3' Making all in src make[1]: Entering directory `/home/slemmens/Downloads/software/filezilla-3.5.3/src' Making all in include make[2]: Entering directory `/home/slemmens/Downloads/software/filezilla-3.5.3/src/include' make all-am make[3]: Entering directory `/home/slemmens/Downloads/software/filezilla-3.5.3/src/include' make[3]: Nothing to be done for `all-am'. make[3]: Leaving directory `/home/slemmens/Downloads/software/filezilla-3.5.3/src/include' make[2]: Leaving directory `/home/slemmens/Downloads/software/filezilla-3.5.3/src/include' Making all in engine make[2]: Entering directory `/home/slemmens/Downloads/software/filezilla-3.5.3/src/engine' make all-am make[3]: Entering directory `/home/slemmens/Downloads/software/filezilla-3.5.3/src/engine' g++ -DHAVE_CONFIG_H -I. -I../../src/include -I./../include -I/home/slemmens/local/include -I/home/slemmens/locallib/wx/include/gtk2-unicode-release-2.8 -I/home/slemmens/localinclude/wx-2.8 -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -DWXGTK -I/home/slemmens/local/include -fpch-preprocess -g -O2 -Wall -g -fexceptions -std=gnu++0x -MT libengine_a-FileZillaEngine.o -MD -MP -MF .deps/libengine_a-FileZillaEngine.Tpo -c -o libengine_a-FileZillaEngine.o test -f 'FileZillaEngine.cpp' || echo './'FileZillaEngine.cpp /usr/include/c++/4.3/ext/new_allocator.h: In member function ‘void gnu_cxx::new_allocator<_Tp>::construct(_Tp*, _Args&& ...) [with _Args = int, _Tp = CNotification*]’: /usr/include/c++/4.3/bits/stl_list.h:480: instantiated from ‘std::_List_node<_Tp>* std::list<_Tp, _Alloc>::_M_create_node(_Args&& ...) [with _Args = int, _Tp = CNotification*, _Alloc = std::allocator<CNotification*>]’ /usr/include/c++/4.3/bits/stl_list.h:1349: instantiated from ‘void std::list<_Tp, _Alloc>::_M_insert(std::_List_iterator<_Tp>, _Args&& ...) [with _Args = int, _Tp = CNotification*, _Alloc = std::allocator<CNotification*>]’ /usr/include/c++/4.3/bits/stl_list.h:881: instantiated from ‘void std::list<_Tp, _Alloc>::push_back(_Args&& ...) [with _Args = int, _Tp = CNotification*, _Alloc = std::allocator<CNotification*>]’ FileZillaEngine.cpp:111: instantiated from here /usr/include/c++/4.3/ext/new_allocator.h:114: error: invalid conversion from ‘int’ to ‘CNotification*’ make[3]: * [libengine_a-FileZillaEngine.o] Error 1 make[3]: Leaving directory `/home/slemmens/Downloads/software/filezilla-3.5.3/src/engine' make[2]: * [all] Error 2 make[2]: Leaving directory `/home/slemmens/Downloads/software/filezilla-3.5.3/src/engine' make[1]: * [all-recursive] Error 1 make[1]: Leaving directory `/home/slemmens/Downloads/software/filezilla-3.5.3/src' make: * [all-recursive] Error 1

Configured with: ./configure --prefix=/home/slemmens/local/ CPPFLAGS=-I/home/slemmens/local/include --with-idn-lib=/home/slemmens/local/lib/libidn.so PKG_CONFIG_PATH=/home/slemmens/local/lib/pkgconfig/ --with-tinyxml=builtin --without-dbus

wxWidgets configuration: ./configure --prefix=/home/slemmens/local/ --with-gtk --enable-unicode

Dependencies: gettext-0.18.1.1 gmp-5.0.5 gnutls-2.12.20 libidn-1.25 nettle-2.5 p11-kit-0.13 sqlite-autoconf-3071300 wxWidgets-2.8.12 xdg-utils-1.1.0-rc1

GCC: gcc -v Using built-in specs. Target: x86_64-suse-linux Configured with: ../configure --prefix=/usr --infodir=/usr/share/info --mandir=/usr/share/man --libdir=/usr/lib64 --libexecdir=/usr/lib64 --enable-languages=c,c++,objc,fortran,obj-c++,java,ada --enable-checking=release --with-gxx-include-dir=/usr/include/c++/4.3 --enable-ssp --disable-libssp --with-bugurl=​http://bugs.opensuse.org/ --with-pkgversion='SUSE Linux' --disable-libgcj --disable-libmudflap --with-slibdir=/lib64 --with-system-zlib --enable-cxa_atexit --enable-libstdcxx-allocator=new --disable-libstdcxx-pch --enable-version-specific-runtime-libs --program-suffix=-4.3 --enable-linux-futex --without-system-libunwind --with-cpu=generic --build=x86_64-suse-linux Thread model: posix gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux)

Filezilla lags really hard if operations with a lot of files are executed(like upload 100K files with skipping existing files). This happens because wxWidgets event queue gets jammed and everything gets stuck in processing pending events.

This can be fixed by supporting wxWidgets 2.9 and using QueueEvent instead of PostEvent or with fix I attached(it makes sure that only some events are processed from pending event queue in one iteration).

The commands I need most often are "delete all files in the queue" and "new folder". I have discovered that by right-clicking I can get both of these options, but as you undoubtedly know from the many help requests, beginning users do not know about the right-clicking. Please add these two important items to your toolbar. They are more commonly needed than any of the other toolbar items.

If the setting for Connection/Generic Proxy/Proxy Host has a trailing space, FileZilla does not connect. Similar to #1054.

Failure log:

Status: Connecting to example.net... Response: fzSftp started Command: proxy 1 "proxy.example.com " 3128 Command: open "user@…" 22 Error: ssh_init: Proxy error: Unable to resolve proxy host name Error: Could not connect to server

Working once proxy name fixed:

Status: Connecting to example.net... Response: fzSftp started Command: proxy 1 "proxy.example.com" 3128 Command: open "user@…" 22 Command: Trust new Hostkey: Once Command: Pass: Status: Connected to example.net

Of course there may be other parameters as well that don't strip trailing spaces. It's a minor issue, but took quite a while to diagnose.

Filezilla gets unhandled exception errors on occasion. I have added a program to the service to restart the service on failure, but it does not execute because of the two popup boxes that appear. Is there a way to suppress these boxes? When I hit OK on the two boxes, my program runs and restarts successfully.

hi,

FZ detects changing of a local opend file and asks, to reupload. could this be automated? maybe a checkbox in settings? would be great. thanks

I donwloaded FileZilla Server 0.9.41 and tried it on two different Windows machines (Windows 7 and 2008 R2). Connecting to the server did not work, neither with Microsoft Windows ftp client nor with FileZilla Windows client. When a connection attempt is made, server sends back to the client some binary garbage starting with characters FSZ (or may be FZS) and then non-ASCII.

I often would like to be able to plan transfers for a defined time.

It should be able to be defined for every file transferred and should propose to define a date based on the PC's date which is when the file will be downloaded/uploaded.

Optionally, it could be proposed to define the date as a countdown (like "the file will be transferred in : .. [seconds/minutes/hours/days]"). It could also define an OS scheduled job.

Thanks for your job !

In windows 8 RTM, if filezilla server is installed to "manually" start the server service, the "start filezille service" shortcut created by the installer does not work.

However, one can go to control panel -> services and start it there, and it filezilla server will work without issue.

Version: 0.9.41beta

File is not visible

File name: .~lock.Längen für Kupfer-LAN Kabel.ods# File size: 168 Bytes This temporary file is generated while using OpenOffice.org File attributes: only the archive bit is set. The file is not locked and it is displayed in the GUI of the server as well as in other file explorer when the memory is moved from the server to a computer. With FileZilla the folder that contents the not shown file can not be deleted but the folder can be moved including the invisible file. After moving the folder the file is still invisible in FileZilla.

FileZilla Client: 3.5.3 (2012-01-08)   OS: 3 Registered Windows XP Prof., Version 2002, Service Pack 3 Hardware: 3 different computer with AMD and Intel CPU   FTP server: Fonera 2.0 N Memory: FAT32

If more than one tabs of fileZilla are opened and changes are made in the Host name, Username or Password field in any tab, it is reflected in every tabs. The latest entered values are shown in every tabs.

Open two tabs (at least) with the local directory listing of the same folder.

Delete a file from that local directory from one of the tabs. It doesn't reflect in the other tab until we Refresh the directory.

I am using FileZila, I was working and I just disconnect it, and again reconnect, this time it is giving me an error Connection timed out and Could not connect to server.

Status: Resolving address of ftp.edenparkgems.com Status: Connecting to 174.120.189.222:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 7 of 50 allowed. Response: 220-Local time is now 19:09. Server port: 21. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER edenpark Response: 331 User edenpark OK. Password required Command: PASS Error: Connection timed out Error: Could not connect to server

Please help me.

Hi Sir/Mam,

I am using below filezilla command from dos to upload file to ftp server but I am getting Unknown option u.

C:\Program Files (x86)\FileZilla FTP Client>filezilla.exe -u "c:\Program Files ( x86)\FileZilla FTP Client\filezilla.exe" ​sftp://username:password@xxx.xxx.xxx:xxxx/"Scheduled Upload" -f c:\testfilezilla.txt

On selecting files from either site, local or remote, when I select one file by clicking from the files that already selected, then the information pane does not update. For example, on Local Directory, if I select 3 files, and then I select one of the file from those 3 files by clicking, then information pane, don't get updated. It still shows "Selected 3 files. Total size: xxxx bytes"

Hi,

FileZilla Client

Version: 3.5.3

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2012-01-08 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 2.10.4

Operating system:

Name: Windows NT 6.1 (build 7601, Service Pack 1) Version: 6.1 Platform: 64 bit system

Statut : Connexion à 192.168.1.100:21... Statut : Connexion établie, attente du message d'accueil... Réponse : 220-FTPSERVE IBM VM Level 540 at PHOENIX.dassault-aviation.co, 14:27:57 EDT SATURDAY 2012-09-08 Réponse : 220 Connection will close if idle for more than 5 minutes. Commande : USER anonymou Réponse : 230 ANONYMOU logged in; working directory = /../VMBFS:DWSYS:ANONYMOU/ Statut : Connecté Statut : Récupération du contenu du dossier... Commande : PWD Réponse : 257 "/../VMBFS:DWSYS:ANONYMOU/" is working directory Erreur : Impossible d'analyser le chemin retourné. Erreur : Impossible de récupérer le contenu du dossier

With a previous version of filezilla we have at work, I can do what I want. Now with this one from home I can't... The deal is to send windows files to a z/VM mainframe. The target is BFS file architecture.

Able to test/send anything you ask me.

Regards Alain

Hi, I would like to ask your assistance about the issue being encountered using FileZilla. Files from a specific channel, several times files are corupted.

In addition to the ability to overwrite a changed file using my Filezilla client during a file compare (my computer to the file server), is there the ability to delete files on the server that no longer exist on my client during a file compare?

Folder on a FTP Server with äöü/ÄÖÜ (German umlaut) in Foldername aren't shown on FileZilla Client 3.5.3 for Mac. I tried the Windows FileZilla Client 3.5.3 and recognized, that there is no bug. It Is only a Bug at the Mac Version 3.5.3.

Hi FileZilla:

I've been trying to get FileZilla (v.3.5.3) through to tripod.com in order to upload my files to my website located there (​http://australianart.tripod.com/). Tripod assert, over and over, that they can ftp access my website without any problems from their end. However I cannot access my website and have been trying for over 3 weeks now without success and always with the below-listed error message:

Status: Resolving address of ftp.tripod.com Status: Connecting to 209.202.252.54:21... Status: Connection established, waiting for welcome message... Response: 220 Welcome to Tripod us FTP. Command: USER australianart Response: 331 Username set to australianart . Now enter your password. Command: PASS Response: 501 Please verify your Password Error: Critical error Error: Could not connect to server

I wonder if you have any ideas as to what the problem might be? I can ftp access all my other sites (around 6 of them) without any issues.

Regards, Murray Thompson (an otherwise very happy FileZilla user)

I was trying to upload photos from my PC and when I finish I cant open my website,show me this message

Warning: Division by zero in /home/rainbiz/public_html/files/rotateimage.php on line 0

I want to know if this is a problem with FileZilla or no?

Thanks

Problem: My use of the FileZilla client frequently consists of downloading several large files and uploading a few small files in return. Most generally the file to be uploaded is time sensitive and must occur as soon as possible.

With the current queue process as it is now and the number of simultaneous file transfers is set to a limited amount; in order to upload an unspecified amount of fiels while downloading the maximum transferable limit of files or more, I must do the following:

1. Set the priority the the upload files higher than the download files. (Not always possible)
2. Increase the transfer queue by the amount of files that I need to upload. (This can be an inconvenience because I have to go count all of the files to be uploaded)
3. Once all upload file transfers have started the transfer process, I must go and revert the concurrent transfer limit to the previous value before any of the upload transfers are finished so as to not start another download transfer. (At times the uploaded files can be very small in size and that can make this step nearly impossible.)

Proposed solution: Have an option in the settings dialog that will support the ability to have separate upload and download queues and speed/count transfer limits for both.

Justification: Majority of, if not all, internet connections allow for data to be both uploaded and downloaded concurrently. I have not heard of an FTP protocol nor an ftp server side implementation that cannot handle simultaneous upload and download of data. (I'm nearly positive that the FTP protocol must talk both ways in order to function properly). Therefore upload and download transfers should be treated as separate entities as they can be operated simultaneously.

Restrictions to proposed solution: There may be a limit of concurrent connections that can be established per single user credentials to a specific FTP server. If this is the case, then it will be the user's responsibility set the transfer limits accordingly.

System details: FileZilla Client version: 3.5.3 OS: Windows Server 2008R2 SP1 (VM on top of ESXi 4.1)

I have been trying for months to delete old files off your server but I keep getting an "access denied" error message.

Interesting. looks like i'm the 1st guy to raise this question. when will FileZilla support retina display for macbook pro?

thanks.

Hi, Please let me ask a simple technical question. It is not a bug or problem with filezilla; It is more technical behavior of Filezilla Client and a FTP server like Filezilla Server. As the subject can goes in different ways; Please let me explain my qestion in three sub parts. I'm sure the answer is such easy for Filezilla technical guys (but much important for me).

We have two different conception is FTP conections: 1. Number of parallel connections in term of file to a server (If I'm right the maximum number of files at the same time can be define in the Server like Filzeilla-server; as well we can limit it in the client too like filezilla-client between 1 and 10)

2. Number of simultaneous connection (threads) for a file; which means during Doanload/Upload a file; the file can be seperated in N-parts (N threads)and each part be downloaded in parallel with other parts. This subject can be see in clear in FTP clients like DAP(download accelerator Plus) in loawer part of DL window; but n Filezilla can not be seen. I didn't see such definition in Filezilla client or server for clustering a file and donwloading it in parrallel. (please don't donfond this subject with parralell download/upload of sever files (in part.1)

Regarding to part.1 it is clear that both in Server and client we can define the maximum number of parralel files (number of parallel simultaneous file connection) at the same time and surely server limit overcomes the client limit)

QUESTION: Regarding to part.2,

May I know if it is Server or client (or both) that activates possiblity of slotting a file for DL/UL ? (I call that number of parallel simultaneous parts OR Thread)

Why Can not I see this value in the Filezilla client or Server ?

If it is not clear such option for the users; May i know what is written as code in filezilla Server or client or both for this subject ?

If it is automatically controlled by Client or Server as advanced feature; May I know how it is controlled and how I can limit it on a fix value ? (please don't confond it with number of parallel files) (DAP window shows such possibility, so for me it exists) (for me DOS command FTP; performs DL or UL with just 1 file at the moment and with 1 thread) (please take into account that my target is not proving that we go to highest throughput. More I want to know how it is controlled and can be set; for example if I want to do DL/UL just with 1 file in 1 thread. So the subject is just managing the session)

The plaform can be considerd windows 7, vista or XP. It seems in recent versions of Filezilla, such option doesn't exist more.

Thanks in advance for your answers and support. Best Regards,

Hi, we have been using Filezilla FTP for 12 mths with no problems. It was last used successfully Tues 18 September to upload my bridge club Mornington BC results. I have not been able to connect since then, despite repeated attempts. We have the latest version of Filezilla. Can you help? I have attached a phot of the screen with the error.

I am trying to connect to an sFTP Server and download a file that is 155,515 bytes. It fails after 32,768 bytes and disconnects from the server.

I am using FileZilla 3.53 on Windows NT Operating System. FileZilla Client

Version: 3.5.3

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2012-01-08 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 2.10.4

Operating system:

Name: Windows XP (build 2600, Service Pack 3) Version: 5.1 Platform: 32 bit system

From another computer Running Windows 7, I am able to download the file successfully.

FileZilla Client

Version: 3.5.3

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2012-01-08 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 2.10.4

Operating system:

Name: Windows XP (build 7601, Service Pack 1) Version: 6.1 Platform: 64 bit system

Just wodnering how I can get the Windows XP Computer to Function Properly. (this isn't just happening for me, many users trying to connect to our systems are having the same issue).

Feel free to contact me at (312) 444-3848 or at kw97@… if you need further information or if you would like to discuss.

Thank You, Kim

I am trying to connect to an sFTP Server and download a file that is 155,515 bytes. It fails after 32,768 bytes and disconnects from the server.

I am using FileZilla 3.53 on Windows NT Operating System. FileZilla Client

Version: 3.5.3

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2012-01-08 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 2.10.4

Operating system:

Name: Windows XP (build 2600, Service Pack 3) Version: 5.1 Platform: 32 bit system

From another computer Running Windows 7, I am able to download the file successfully.

FileZilla Client

Version: 3.5.3

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2012-01-08 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 2.10.4

Operating system:

Name: Windows XP (build 7601, Service Pack 1) Version: 6.1 Platform: 64 bit system

Just wodnering how I can get the Windows XP Computer to Function Properly. (this isn't just happening for me, many users trying to connect to our systems are having the same issue).

Feel free to contact me at (312) 444-3848 or at kw97@… if you need further information or if you would like to discuss.

Thank You, Kim

I transfered .htpasswd file to remote server selecting option as ascii. Hoever, when i access the transfered file, I see it as 'unknown file type(binary file) How to make sure the file is transfered only as ascii only.

hi i have filezilla client what is limit for concurrent downloads

i have internet download manager like max connections number i set 4 i have FTP Server server allow max 8 i like set 4 limit dont want server problem to get crash

limit for concurrent downloads if i set 4 so connection will be 4 received if set 0 mean 100 connection connected like max high

I have noticed that I cannot depend upon Filezilla to upload files reliably. I just spent an hour with GoDaddy technical support to discover that even though my FileZilla upload screen showed (RH panel)that files were being uploaded, that they were in fact noton the destination server.

I verified this with GoDaddy's FTP program and also the CoffeeCup FTP program

When a folder has more than 10,000 files FileZilla count and list them to 9,998 files after that file are not counted and showed.

Feature Request

It would be really wonderful to search for remote files based on the modified date and time. As a case in point, I uploaded an entire project, then change a few files on the same day. Now, a month later, it is really difficult to find these few files that were modified a few hours after the initial upload.

I can currently use remote file search to find files by the modified date, but this does not seem to take into account the modified time.

From a programming perspective, I don't think this would be very difficult to implement... It already accepts a date and time, so we just need to extend the comparison to look at the time as well as the date.

Thanks in advance for your consideration!!!

• Adam

A happy FileZilla user

I've facing problem like connection refused by server from downloaded filezilla client..... Filezilla is essentially for my day to day work activities to be get ftp download/upload file from ISP server...

as per below error is coming since download, kindly give support to me to clear this issues ...

Status: Waiting to retry... Status: Connecting to 218.248.255.137:21... Status: Connection attempt failed with "ECONNREFUSED - Connection refused by server". Error: Could not connect to server

Expecting valuable feedback from technical/exp people....

Oxygen is the default theme used in most Qt applications and the KDE environment.

This is a FileZilla theme utilizing those icons: ​http://kde-look.org/content/show.php/?content=141546

The license for this theme is dual licensed, CC and GPL. Their terms are available here: ​http://www.oxygen-icons.org/?page_id=4

I've been testing this theme on my system, and all seems to work well with it.

Continually receive server connection errors:

Status: Connecting to stg-upload.vrli.com... Response: fzSftp started Command: open "Assurant_Loss_Draft@…" 22 Error: Server unexpectedly closed network connection Error: Could not connect to server Status: Waiting to retry... Status: Connecting to stg-upload.vrli.com... Response: fzSftp started Command: open "Assurant_Loss_Draft@…" 22 Command: Pass: Error: Authentication failed. Error: Critical error Error: Could not connect to server

Can't download an empty file from the FTP server to my local computer. Using Filezilla 3.5.3

Hi

I have a ftp server (vsftpd) on a Amazon Web Services EC2 virtual machine in a production environment. It's behind a Load Balancer, I access it using filezilla in passive mode for datas (vsftpd is configured to give the direct ip instead of using the load balancer for datas). Data and control channel thus have different ips. I use classic ftp (no ssl or whatever).

After exactly 60 seconds of transfer (upload or download, juste big enough to last more than 60seconds) i get a "server closed connection" error, for any version of filezilla (>=3) that didnt segfault i tried. But VSFTPD never actually closed the connection...

I looked into filezilla source code, the problem seems to come around in src/engine/ftpcontrolsocket.cpp. There is a control that seems to provoke the bug in CFtpControlSocket::OnReceive... By commenting it the problem disappear

if (!read)

{

LogMessage(::Error, _("Connection closed by server")); DoClose(); <= there i commented return;

}

the transfers stall a few seconds in the end of the transfer (it might be this test purpose) but i dont lose my connexion and the file transfered is ok.

Without the ELB (using the same ip for control and data) i dont get the initial problem.

I dont think this a good fix, but it does fix the problem for me.

User name u501037784 FAILED attempt TO UPLOAD FILES to host 31.170.166.105

Error message: Command: STOR Crisis.html Reply: 552 Disk full - please upload later

src/interface/resources/filezilla.svg not included in the source tarball for 3.6.0-beta1

I have created patch to support wxWidgets 2.9, tested it on Windows 7 Visual Studio build and Kubuntu Linux wxGtk build.

Hello. when i open a ftp and make the program idle for a minute or so, then it cant refresh, edit, delete, rename the files(but it accepts new uploads!). it says a command (for exapmle): CWD myfolder

and freezes. i have to re-login to website to be able to continue working with my ftp. i have changed options from preferences (made the disconnect period 1000 minutes), but it doesnt work.