Custom Query (10423 matches)

FileZilla updated while I was away from my download session, and now I can't drag and drop files at all.

I hope this wasn't intentional - a couple of hours ago I was able to drag things freely to the desktop.

Thanks, Chris Benson

create directory and enter it actualy creates the dir, but pretends nothing happened. you always get the error dialog "(!) another remote operation is already in progress, cannot change directory now."

Status: Resolving address of Status: Connecting to ... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 1 of 50 allowed. Response: 220-Local time is now 05:56. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER Response: 331 User OK. Password required Command: PASS Response: 230 OK. Current restricted directory is / Command: SYST Response: 215 UNIX Type: L8 Command: FEAT Response: 211-Extensions supported: Response: EPRT Response: IDLE Response: MDTM Response: SIZE Response: MFMT Response: REST STREAM Response: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; Response: MLSD Response: AUTH TLS Response: PBSZ Response: PROT Response: TVFS Response: ESTA Response: PASV Response: EPSV Response: SPSV Response: ESTP Response: 211 End. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: CWD /public_html Response: 250 OK. Current directory is /public_html Command: PWD Response: 257 "/public_html" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (69,65,27,131,45,69) Command: MLSD Response: 150 Accepted data connection Response: 226-Options: -a -l Response: 226 266 matches total Status: Directory listing successful Status: Creating directory '/public_html/photography'... Command: MKD photography Response: 550 Can't create directory: File exists Status: Retrieving directory listing... Command: CWD /public_html/photography Response: 250 OK. Current directory is /public_html/photography Command: PWD Response: 257 "/public_html/photography" is your current location Command: PASV Response: 227 Entering Passive Mode (69,65,27,131,176,131) Command: MLSD Response: 150 Accepted data connection Response: 226-Options: -a -l Response: 226 2 matches total Status: Directory listing successful Status: Resolving address of Status: Connecting to Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 2 of 50 allowed. Response: 220-Local time is now 05:57. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER Response: 331 User OK. Password required Command: PASS Response: 230 OK. Current restricted directory is / Status: Server does not support non-ASCII characters. Status: Connected Status: Starting upload of d:\www\jimm\photography\index.html Command: CWD /public_html/photography Response: 250 OK. Current directory is /public_html/photography Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (69,65,27,131,130,78) Command: STOR index.html Response: 150 Accepted data connection Response: 226-File successfully transferred Response: 226 0.138 seconds (measured here), 73.52 Kbytes per second Status: File transfer successful, transferred 10,414 bytes in 1 second Status: Retrieving directory listing... Command: PASV Response: 227 Entering Passive Mode (69,65,27,131,246,162) Command: MLSD Response: 150 Accepted data connection Response: 226-Options: -a -l Response: 226 3 matches total Status: Directory listing successful Status: Disconnected from server Status: Disconnected from server

1.sync browsing on 2.connect 3.dig into a subfolder, just 1 is fine, any will do. 4.right click on the folder you are currently in on the local side and upload it

actual: it will become a subdirectory copy underneath the current directory on the remote side. so now you have 2 copies of the dir tree, one inside itself.

expected: should have uploaded the same directory and replaced any files that were existing and added any new dirs, touched or copied dir dates as appropriate because they were being accessed. it's almost like a replace, but you don't lose files in this kind of replace. essentially, files with same name get replaced. new files get added. I don't know if a replace does this or not. probably does.

When transferring a large batch of files on 3.9.0 (hundreds of files averaging between 2KB and 300KB), 10 simultaneous transfers at once, the UI locks up (although the app is still downloading and the command echo window is still scrolling through commands). The downloading slows to approximately 5-10% of available network speed (and I can see the echo window slows commands to this rate as well). Once all files have been downloaded, the UI becomes accessible again.

Note, I had no problems performing the same actions above on 3.8.1. On that older version, downloads were at full speed and the UI never locked up.

I confirmed that this is a new issue introduced since v3.8.1. I recreated the issue on 3.9.0, then I downgraded from 3.9.0 back to 3.8.1 and the issue went away (speeds went back to normal and UI was accessible during this download process). So that rules out an issue with my computer, OS, network or server.

I have not tested if this affects multiple simultaneous uploads as well.

I installed the latest FileZilla Client 3.9.0.1 yesterday, and every time I open a new directory now the screen goes black for a second, and I get a warning that says the Windows driver had recovered from a problem. If I try to do anything even slightly complex, I get the blue screen of death and have to restart (x3 so far today). Hopefully a patch will come through to correct this issue. Sorry, I wish I knew something more specific to tell you, but please email me if I can help.

Hi, we have the problem that filezilla opens a new controll session when starting a filetransfer. So the server will disconnect the first controll session and filezilla got an error about that. The filetransfer gos on and end with no errors.

Thank you

Previous to the most recent update, upon completion of file upload the window focus remained in the local side with the files still selected, making it easy to simply hit 'return' to quickly upload those same files again. Now after a file is uploaded the window focus changes to the Host input box.

My current setup:

FileZilla Client Version: 3.9.0.1

Build information:

Compiled for: x86_64-apple-darwin13.3.0 Compiled on: x86_64-apple-darwin13.3.0 Build date: 2014-07-22 Compiled with: Apple LLVM version 6.0 (clang-600.0.38) (based on LLVM 3.5svn) Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.2 GnuTLS: 3.2.15 SQLite: 3.8.5

Operating system:

Name: Mac OS X (Darwin 12.5.0 x86_64) Version: 10.8

Ever since I updated from 3.8.1 to 3.9.0.1 i can not drag and drop to the desktop i get the circle with the line through it. This has happen on other computers as well

I have a directory lager than 300 File with 58MB, when i upload up to 200 file, Filezilla continue loop info in console log with no upload process and unresponding, so that i must force with application and try many time, but same result. Hoping this info useful for you, thank

I updated to FileZilla 3.9.0.1 today and am now accidentally downloading a ton of files because if you left click and then immediately right click a file it's treated as a double left click and is downloaded. Normally I will left click a file, then right click so I can edit it and this is disrupting my workflow pretty significantly because I have to wait several seconds before right clicking so I don't accidentally download it.

I have just updated FZ client to new version, noticed that the date format has changed to mm/dd/yy. Before update this was dd/mm/yy as per system settings (UK, Windows 8, 64-bit). Checked the setting in Filezilla and the default is selected (use system default). It seems this is being ignored.

hello i change my password for filezilla client but its not leting me do a password reset im not sure what happen i need some help thanks

As of the recent update to 3.9.0.1, when I connect to a site, my screen goes black and windows reports that the display adapter has crashed. It then comes back on with FileZilla not as the window in focus, but still open and I can push/pull files at that point. If I click F5 to refresh a directory listing the same thing happens.

You have specified an incorrect username. Please check your username and try again. If you continue to have problems please contact the Board Administrator. its not leting access user control panel

On tab "Failed transfers" Context menu element "Reset and requeue all"(Очистить все и добавить снова) named as "Reset and requeue selected files"(Очистить выбранные и получить снова) On english language is no problem

Filezilla Client 3.9.0.1

On file /locales/ru.po Strings 779-781

#: resources.h:619 msgid "&Reset and requeue all" msgstr "&Очистить выбранные и получить снова"

must

#: resources.h:619 msgid "&Reset and requeue all" msgstr "&Очистить все и получить снова"

FileZilla just updated itself to the latest version (3.9.0.1) and when it restarted I've found the interface is around (see screenshot). This did not happen on the previous version.

I guess it is because my Windows' location is set to Israel which has a right-to-left language setting, so it messed up the interface.

I have a global environment variable LC_ALL set to en-US for things like GIMP but it doesn't seem to be a solution for FileZilla.

I only have English as the language of choice installed in FileZilla.

Hi, since the last release (3.9.0.1), the focus on the last selected file ist lost if I use another app and come back to Filezilla. This is frustrating as I need to use the mouse to select the file again. A similar problem occurs when I open the Site Manager : i cannot simply press "Enter" anymore to connect to the last Site I connected to. It was also possible with the previous release.

Our company uses FileZilla to all our FTP accounts with all our employees on Windows 7. Up to 3.8.1, we have been running our accounts off a soft symbolically linked sitemanager.xml ( via mklink in cmd )file that is backed up offsite, and thus available to all our employees as they work on their specific version of FileZilla. When we updated to 3.9.1, FileZilla is now unable to see the mklink'd file's contents, and returns 0 bytes. As this has happened across all our computers, and we've re-linked the files numerous times with no success, we've reverted back to 3.8.1 so our business can continue to operate.

As a clarification, the file itself is not located on an internal server, as some of our employees do not work in the office. It has been setup on each pc's with a soft symbolic link that references a file in a local folder that is backed up offsite and each of our pc's have that cloned folder ( Dropbox ).

We'd love to provide any additional information to assist in this bug's resolution, as it is and has been an intricate part of our development model for many years.

Thank you for all that you do. FileZilla is the best solution out there for what we do, paid or free.

The latest version of FileZilla (3.9.0.1) seems can't copy or transfer file from windows directory to server directly, drag a file from windows explorer instead of local tree (the left side of filezilla) has no use at all. It's too not convenient if can only transfer via the left side of filezilla since we need to find the directory path every time we want transfer a file.

I am running Filezilla Client version 3.9.0.1 on my Mac. I am unable to open multiple server sessions in different tabs. I connect to one server but when I connect to another it just opens in the first tab and the other tab says "Not Connected." I have tried this with multiple servers with the same thing happening each time, the server that is open in the first tab is closed and the new one I selected opens in it's place. Please see attached image.

I was able to do it in the previous version but something happened in this current update.

Since updating to FileZilla 3.9.0.1, I am no longer able to copy and past the local site path to the Remote site path like I have been able to in the past. Was this feature disabled on purpose and if so would you tell me the reason?

I keep the same path on my local drive as I do on my server and it just means less typing.

Thank you for a great product.

Filezilla 3.9.0.1

You can no longer use the numpad enter button to initiate a file transfer. You can use the numpad enter button to confirm a file transfer though.

Filezilla 3.9.0.1

You can no longer copy or paste the local or remote Path

Hi,

I update to the latest patch 3.9.0.1 and for now on I got driver problem, my screen goes to black and windows show me a message with a driver issue problem. I update my windows, I uninstall FileZilla, reboot and re-install and still got this problem.

I also have a problem with the drag&drop outside the application, this is not working.

Please help and fix.

While the File Queue Tab and the Failed Transfers Tab correctly show files in queue and files that failed to transfer, respectively, the Succeeded Transfers Tab stays completely empty.

This error occured since version 3.9.0.0

Note: the actual Tab names may be a little different, since my Filezilla Client is a brazilian portuguese version and I just freely translated the tab names from protuguese to english.

FileZilla Client

Version: 3.9.0.1

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2014-07-22 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.0 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.2 GnuTLS: 3.2.15 SQLite: 3.8.4.3

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64 bit system

Trying to save settings to send to client. Click on Export, FileZilla immediately closes, without saving any data.

This is the little problem but most required. 1) i selected local files 2) press "TAB" 2 times 3) now i am in list of files on FTP 4) Select files/dir of ftp 5) now go back by press "SHIFT + TAB" to local files list 6) when focus go to this local files list it set focus on local dir list where selected MY COMPUTER and drives list in files list box.

there should display on got focus opened files list which was displayed before got focus. after i update file zila this is happening.

Thank You

I've updated filezilla to 3.9.0.1 and all my sites under 'site management' where lost.

I use a symlink to a dropbox account to sync my sites over several computers. When i copy the sitemanager.xml to C:\Users\[USERNAME]\AppData\Roaming\FileZilla everything works. However, when I create a symlink from that location to the dropbox location, no sites are available.

It worked like a charm in the previous version, can you fix it?

Once I upgraded to 3.9.x on my mac I can no longer copy and paste from/to site directory bars [i.e. where local site: / remote site: are]. Previously keyboard shortcuts [i.e <ctrl>+c and <ctrl>+v] would allow you to copy and paste there.

This seems like a bug that was introduced recently.

Hi,

I generally like copying pasting paths in the local site / remote site path between my tabs. This was possible until the latest version came out. It's now no longer possible in the MAC Filezilla client. Is that a bug or a feature that was removed?

Aaron.

Open bookmark in new tab doesn't seem to work. The new tab becomes Not connected and it uses my current one.

After updating to 3.9.0.1 I could no longer view/edit certain file types which previously had proper filetype associations. I went into filetype associations to add them in again. when adding: filetype "/Applications/Sublime Text.app" I would get the error "Cannot find application "/Application/Sublime " There was essentially no way for me to View/Edit files on a server and therefore I reverted back to the older version I had installed, 3.8.1 where everything was working fine before I re-added the filetype associations that seemed to have gone missing, checked that they worked, and then re-installed 3.9.0.1. Now I can view/edit most files I need but it still won't allow me to add Sublime text within the custom filetype associations.

Today (7-31-14) I upgraded to the latest version of filezilla and was unable to upload a 13.4 mb mp3 file. It uploaded about .25 mb and quit after a couple of minutes. I tried changing various settings, but nothing helped. It kept stopping the upload and cutting the file way short, a tiny fraction of what it should have uploaded.

I uninstalled Filezilla and installed an older version, 3.7.4.1 and the upload completed successfully, working as it has in the past.

The file is being uploaded to an Apache server that is set to limit uploads to five minutes, but I've been able to routinely run uploads on this server that take upwards of half an hour. Upload speed is quite slow, averaging only about 11kbs, so the 13.4mb upload today took 20 minutes.

It would save a lot of time for users if it were possible to remove individual entries from the Quickconnect bar. Right now the only option is to clear the entire bar, and then reenter each server's information, a tedious and (should be) uneccessary procedure. I have old, unused servers still in there because it's such a hassle to reenter them after clearing the Quickconnect bar. Please consider this.

when opening a 2nd connection, it is not showing under Ubuntu 14.10 (i.e. Establish connection in a new tab)

I use FZ 3.9.0.2 in Windows 7, service pack 1, 64 bit edition.

display driver not responding and recovered. Happens quite often when FZ is open, other times, it is functioning normally.

Today only upgraded to 3.9.0.2. Thanks

When browsing the "local site" file browser using only a keyboard, the focus is lost after the "Target file already exists" dialog is closed.

The focus jumps into the "host" field forcing the user to either use the mouse or press TAB many times until the focus is back in the local site file browser.

Same thing also happens when browsing the "remote site" file browser and downloading a file. The focus jumps to the field "host" after hitting RETURN in the "Target already exists" dialog.

Dear developer,

I have strange problems with FileZillas connection.

2 days ago the function worked fine and everything was uploaded to my webpage.

Today when I noticed that I need to do some more filetransfers to my websites (in total I have 9-10 websites) at Crystone.com it just give me error;

"530 Sorry, the maximum number of clients (5) from your host are already connected."

So I have done following route cause checks;

1. Re-started FileZilla (several times)
2. Re-started my modem and router
3. Checked wit Crystone support if their servers was ok and everything was set up correctly.

3a. I have tested with log on by "domain" or by "IP". 3b. Changed user login 3c. Enter a new user on the specific domain in the Crystone Control panel.

Please tell if their is anything that I could do more or if it is a bug or error in FileZilla.

Or if it exist a instruction that explains what to do in these cases (couldn't find any at your FAQ)

Hi,

my Filezilla window moved out of my screen upwards today and I wasn't able to rearrange it. Even when I uninstalled and reinstalled Filzilla I couldn't place the window so that I could see the Icons in the top part..

It worked finally when I installed an older version and then there came a informtion window telling me that there is a newer verison available, which for some reasen also rearranged the main filezilla window into place. (took me about 3h to get there)

Most of the other programs have the menu called "window" next to "help" where there is a function called "zoom", which rearranges the window to fullscreen. This would be great

I'm using a mac book with a second sreen. (OS: Mavericks)

when adding a private key of SFTP , if you adding a key from an Unicode path, meaning, path with Hebrew folder names and space between the name. filezilla client will not connect to the server with that key. only from English no space path. please add a Unicode and space at names in folder for adding a key, and maybe for other things that i miss. Thanks again, Tal.

UI at 3.9.0.1 is right to left out of order. I will put a screen shot for more information.

UI at 3.9.0.1 is right to left out of order. I will put a screen shot for more information.

Since I updated Filezilla, I get the following error reports : Statut : Résolution de l'adresse de ftp.evrypalestine.org Statut : Connexion à 91.216.107.150:21... Erreur : Délai d'attente expiré Erreur : Impossible d'établir une connexion au serveur

I tried with another FTP client, and it works. so the problem seems to be with Filezilla. Regards, Bertrand bertrand.heilbronn@…

When using TLS, transfer speed is slow (around 100KB/s)

I have tried use client version 3.9.0 and 3.9.0.2, server is FileZilla Server 0.9.45. During transferring, CPU usage is <10% (2.6Ghz).

But FileZilla client in a Windows PC works fine when connect to the same server, the speed is > 1MB/s.

I normally am in my IDE and then Alt+Tab into FileZilla. The file I'm working on is typically highlighted at the top of the local pane (have it sorted by Last Modified).

However, in 3.9.0.1 or 3.9.0.2, it looks like the highlight on the file is gray instead of blue. And thus, when I hit Enter to upload it to my server, nothing happens.

it used to be that I could just Alt+Tab and hit Enter and the file uploaded. It was a super fast process, but now, can't do it and that's frustrating as you can imagine. Not sure why that changed, so I assume it's a bug.

Open FileZilla to an existing site. Local site is on left as a folder in Windows C: drive file system. Remote site is on right. From a Windows Explorer window, attempt to copy a file from an arbitrary folder on the local drive to the Local Site folder by drag and dropping into the file list in FileZilla on the Local Site side. The Windows default is to Move, not Copy, for drag/drop on the same drive. The common technique for achieving the non-default operation (in this case copy), is to drag with a right mouse click. This works between Explorer windows and folders, but does not work with FileZilla. Right-click-dragging a file into the Local Site folder on the same drive results in the "Move file" dialog (incorrect), not the "Copy File" dialog (expected).

Workaround is to open an additional Windows Explorer window to the same folder as the Local Site in FileZilla. Then right-click-drag-drop of the file to the local site results in a context menu offering the choice of Move here, Copy here, or Create Shortcut here.

Where in Windows 7 are the sites stored for site manager? I want to delete them all before importing a new filezilla.xml file.

I uninstalled the program and reinstalled and the sites are still there.

The display is aligned to right and the punctuation order is wrong as you can see in the attachement. I have the latest version. The view in the previous version was correct. I have Hebrew and English installed.

The display is aligned to right and the punctuation order is wrong as you can see in the attachement. I have the latest version. The view in the previous version was correct. I have Hebrew and English installed.

The display is aligned to right and the punctuation order is wrong as you can see in the attachement. I have the latest version. The view in the previous version was correct. I have Hebrew and English installed.

The attached file shows the error message that keeps appearing it seems when I have uploaded a file, often when I move between directories. This has been happening now for the last 2 revisions of your code and I am running the latest version as I always do.

I created a directory " Test" in Linux. Filezilla client displays as "Test" and will not enter.

When switching between multiple certs in a chain, the text appears to overlap text from the previously viewed cert, making it difficult to read.

Version 3.9.0.1 had a problem in that it was not possible to drag a file from the Filezilla server pane to one's desktop or other folder in the local file system except by dragging it into the local pane of Filezilla. Version 3.0.0.2 which I understand should have corrected that problem has not corrected it. Now, instead of simply nothing happening as in 3.9.0.1, a message as follows appears: "Could not determine the target of the Drag&Drop operation. Either the shell extension is not installed properly or you didn't drop the files into an Explorer window." Simultaneous with this message, an empty folder with a folder name such as fz3-14072449932070 appears in the local system where the file should have appeared.

Without the local drag and drop and drop feature, Filezilla becomes a real pain to use since it requires changing the local panel directory to a suitable drop location and thus navigating away from the default local directory from which one would typically wish to upload files.

In past versions of Filezilla, I could use the tab key to go from the local site panel to the list of files below, and then to the remote list, and then to the list of files below that. Now (to the best of my understanding), I cannot use the tab key to get to either of the lists of files (I can use the tab key to get to the path of the local and remote sites).

I quite relied on using the tab key in this way -- now I have to use the mouse and it's much slower! Could you return the tab order to what it was two versions ago?

Thank you very much, Leah

The hover text for the Sites Manager icon says that right-clicking will show a list of sites. This works for me on my other (linux) laptop, but on my Macbook, it is not working (nothing happens). Left-click still opens the Site Manager, but right-click does not pop up a list of sites.

FileZilla Client

Version: 3.9.0.2

Build information:

Compiled for: x86_64-apple-darwin13.3.0 Compiled on: x86_64-apple-darwin13.3.0 Build date: 2014-07-31 Compiled with: Apple LLVM version 5.1 (clang-503.0.40) (based on LLVM 3.4svn) Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.2 GnuTLS: 3.2.15 SQLite: 3.8.5

Operating system:

Name: Mac OS X (Darwin 13.3.0 x86_64) Version: 10.9

With current Filezilla 3.9.0.2, drag & drop files to the Desktop doesn't work. The attached error dialog is shown.

Drag & Drop to other folders works well!

The error screenshot is in german, so here's a rough translation:

Couldn't find the destination of the drag & drop operation. Either you don't have the shell extension installed properly or you haven't dropped the files to an explorer window.

After this, I reinstalled the whole FileZilla Client and double checked that the shell extensions are beeing installed as well, but the error stays!

I read a closed ticket with the same issue that I started getting on my Alienware laptop as well. The only program on my computer that creates the display driver issue is Filezilla. I don't know how coincidental it is that I also got this issue as the other person. Even with the recent update it's still doing it. I've never had this issue before.

The window is stuck on top, cannot maximize or minimize or lower, so cannot see about 1 inch on top.

I'm trying to build filezilla 3.9.0.2 on Arch Linux and I get the attached build errors (starting around line 200). I'm building against wxgtk 3.0.1.

Is this an issue with wxgtk or filezilla?

In the mac installer for the client (This has happened in the past few versions), the progress bar and text below it appears to be going off the screen. Pic: ​http://gyazo.com/a871a628f4af030be8a0a0d323e14272

SourceForge has been serving virsues up on the auto-download links and has infected machines here, I still see it offering 724K instead of the 5+MB installer for FileZilla, you may want to look into this as people are trying to download your client and ending up with malware and viruses. One must click the "direct" download link like when the 5 second countdown didn't work. I e-mailed SourceForge a month ago and still I believe this problem remains. It also happened for Greenshot, and may happen for many sourceforge links.

Please investigate.

I built FileZilla 3.9.0.2 against wxWidgets 3.0.1, but i don't see any information displayed in the Message Log Panel

Here's my build parameter:

LDFLAGS="-ldl" \ CFLAGS="$SLKCFLAGS" \ CXXFLAGS="$SLKCFLAGS" \ ./configure \

--prefix=/usr \ --libdir=/usr/lib64 \ --sysconfdir=/etc \ --localstatedir=/var \ --mandir=/usr/man \ --docdir=/usr/doc/filezilla-3.9.0.2 \ --disable-static \ --disable-manualupdatecheck \ --disable-autoupdatecheck \ --enable-locales \ --build=$ARCH-slackware-linux

Other info: Slackware 14.1 / current GCC 4.8.3 GTK+3-3.8.2 gnutls-3.2.15 sqlite-3.7.17

When connecting to the server using SFTP, the following two processes are created on the server:

UID PID PPID C STIME TTY TIME CMD username 23563 23560 0 19:16 ? 00:00:00 sshd: username@notty username 23564 23563 0 19:16 ? 00:00:00 /usr/lib/openssh/sftp-server

They remain active even after the connection closes (ie: disconnecting from FileZilla or closing FileZilla). The next time a new connection is invoked, those two processes are recreated, until they clog the process list.

Tested with FileZilla 3.9.0.2, on two Linux servers, one is CentOS 6.5, the other is Debian 6.0.6.

Using Cyberduck on the same machines, the processes disappear immediately when disconnecting.

Filezilla window is off screen, top left. Can't see close/zoom red yellow green buttons or window header.

Probably related to me having two monitors (one 1920p main monitor, smaller MacPro laptop acting as second monitor).

Most apps have a Window menu with the zoom option so I can fix this, FileZilla doesn't. Tried closing and opening the app. Tried changing desktop res. No go.

I was working fine with just the previous versión of filezilla as son as I have updated to this last version 3.9.0.2 I start to get get next error: receiving a directory list it fails by timeout. the server is working well the failure happens in different directories ramdomly, that is, sometimes it Works fine in directory aaaa but other times not

it Works fine using regular commands from a cmd window

I have observed the same problemin an old versión but it was fixed in last versions (sorry that I can not be more precise)

Estado: Conectando a 213.165.71.109:21... Estado: Conexión establecida, esperando el mensaje de bienvenida... Respuesta: 220-FileZilla Server version 0.9.34 beta Respuesta: 220-written by Tim Kosse (Tim.Kosse@…) Respuesta: 220 Please visit ​http://sourceforge.net/projects/filezilla/ Comando: USER ftpuser Respuesta: 331 Password required for ftpuser Comando: PASS * Respuesta: 230 Logged on Comando: SYST Respuesta: 215 UNIX emulated by FileZilla Comando: FEAT Respuesta: 211-Features: Respuesta: MDTM Respuesta: REST STREAM Respuesta: SIZE Respuesta: MLST type*;size*;modify*; Respuesta: MLSD Respuesta: UTF8 Respuesta: CLNT Respuesta: MFMT Respuesta: 211 End Estado: Conectado Estado: Recuperando el listado del directorio... Comando: CWD /SoftwareRecibido Respuesta: 550 CWD failed. "/SoftwareRecibido": directory not found. Comando: PWD Respuesta: 257 "/" is current directory. Comando: TYPE I Respuesta: 200 Type set to I Comando: PORT 192,168,1,35,62,225 Respuesta: 200 Port command successful Comando: MLSD Respuesta: 150 Opening data channel for directory list. Respuesta: 226 Transfer OK Estado: Directorio listado correctamente Estado: Recuperando el listado del directorio... Comando: CWD TauroPlatform Respuesta: 250 CWD successful. "/TauroPlatform" is current directory. Comando: PWD Respuesta: 257 "/TauroPlatform" is current directory. Comando: PORT 192,168,1,35,62,249 Respuesta: 200 Port command successful Comando: MLSD Respuesta: 150 Opening data channel for directory list. Respuesta: 226 Transfer OK Error: Conexión superó el tiempo de espera Error: Error al recuperar el listado del directorio

Hi,

Since I update to 3.9.0.2 the folder "Documents and settings" of my local C drive is considered as a file (even if it still shown as a folder).

And so when I sort the local drive by name, "Documents and settings" is under every other folders which it shouldn't be. And if there is a file beginning by a letter before "D" then the file is shown before the folder "Documents and settings". So the folder "Documents and settings" appears in the middle of the files list !!!

I revert back to 3.9.0.1, everything is back to normal.

Bye

Mr Strange

I uploaded folder and files in Windows XP 3.9.0.1 client without issues. Folder [Képek] with special character (é) is not listed in OSX 10.9 client 3.9.0.2. Other ftp clients could list as [K�pek]

Response: 227 Entering Passive Mode (199,190,235,20,9,222) Command: STOR 08112014 WITH T1019.txt.gpg Response: 550 08112014 WITH T1019.txt.gpg: Permission denied on server. (Filename (accept)) Error: Critical file transfer error Status: Disconnected from server

Keep showing this, when I'm turn off the firewall or on.

Hi, this could be considered an enhancement request to the current version or perhaps a bug report as the Filezilla client for Mac used to work this way. When you select and hit enter on a file to upload it to the server, then click over to another window such as a text editor, when you click back on the Filezilla client the previously selected file is highlighted in gray. But you can't simply press enter to re-upload the file. You have to physically click on the file again to get it highlighted in blue and then you can hit enter to upload it.

This seems minor, but it has slowed my workflow as I typically edit a local file but need to test it right away on remote test server as I don't have a local MAMP setup.

Hello all,

FileZilla client fails to download a file with a space as first character in SFTP mode. When starting the transfert, file is added to "Queued files" and then moved to "Failed transfers" with message "Could not start transfer"

Sorry if it's a duplicate...

client info from Help/About menu :

FileZilla Client

Version: 3.9.0.1

Build information:

Compiled for: x86_64-pc-linux-gnu Compiled on: x86_64-pc-linux-gnu Build date: 2014-07-24 Compiled with: gcc (Debian 4.9.1-1) 4.9.1 Compiler flags: -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.1 GnuTLS: 3.2.16 SQLite: 3.8.5

Operating system:

Name: Linux 3.14-2-amd64 x86_64 Version: 3.14

Hello, I think a good feature missing from Filezilla is an "Auto Shutdown" feature; This would include in the following circumstances,

Completed Upload(s) Completed Download(s)

Installing new version receive message error "Error writing temporary file. Make sure temp folder is valid." C:\Temp is there! Toshiba 64 bit system

When using FileZilla, I randomly get an error message stating that filezilla.xml could not be removed, then in brackets it says the file was removed successfully. See the attached file for a screenshot.

I can't tell what causes this error - it seems to just have begun happening since 3.9.0 was released and sometimes occurs when changing directories, starting an upload, completing an upload, or switching back to the application when using something else. It appears to have no effect on the operation of the software - it's just an annoying error message that frequently appears.

To help conserve network bandwidth, a great feature would be to have the speed limits change based on the time of day entered by the user. These would change automatically based on the system clock and the user-defined times.

For example, let's say that between 6AM-11PM we have the family using the internet and we don't want to have filezilla taking all the bandwidth. We do want to allow filezilla to have no speed limit after 11PM but the next day, at 6AM, we want the limit to return:

(These are totally user defined, but this example is just to give a use case):

Time = 6AM-11PM Download limit = 300 KB/s Upload limit = 300 KB/s

Time = 11PM-6AM Download limit = unlimited Upload limit = unlimited

Dear all,

When using the remote file search - the result in the dialog window can not be downloaded nor deleted.

When clicking on a file in the result of my search I normally get two options: Download or Delete - but when clicking one of them - the sub-window does not open. There is no action at all.

Thank you!

/Henrick

I use a helper in my macbook and when I close the lid of it and turn off the monitor when you reopen the lid and turn on the monitor toolbar display remains hidden. Ai can not drag the window filezilla. What I realized is that most applications for Mac possesses a menu called "Window", this menu is to minimize the window options, restore, etc ... could you put this option for those occasions

Hi Team, I was able to login successfully last time but cannot login this time. I am using the correct login credentials, however, I still receive connection server issue. Please find attached the screenshot of the issue received. Please could you look into this.

Thanks.

Best Regards, Aditi

Hi,

When you try to rename something while already in rename mode, the client crashes.

e.g. When you're browsing files in the file list, whether local or online, it's possible to click a file and then click it again to rename it,

but right before the filename gets selected and 'rename mode' is entered, it's possible to right-click the file and get the normal context menu.

By then clicking 'Rename', the client crashes.

Screenshots:

Please see attached image for details of error.

I had to downgrade to 3.8.1 from both 3.9.0.1 3.9.0.3 Only 3.8.1 was stable against a problem I started to have with the new version with the display driver. Every time the display needed to refresh using FileZilla, like connecting to server or confirming overwrite, the display would go black before FileZilla next screen refreshes and the display driver recovers and shows the new screen

In my use-case, I often have to connect to many FTP servers so I usually just rely on quick connect to connect. But sometimes I find myself visiting some server frequently and I want to open the quick connect history and right click an item and import it as a site.

I should not have to re-enter the password and details because I usually get them on phone or through email and it's sometimes very hard getting a hold of that login info again.

Upon connecting to a remote server, clicking the binocular icon to use remote file search, and then performing a search, attempting to right click a file or folder and then selecting download will not perform the action. The file/folder will not be added to the download queue. If "Delete" is selected instead of "Download", that file/folder will also not be deleted.

FileZilla Client

Version: 3.9.0.3

Build information:

Compiled for: x86_64-apple-darwin13.3.0 Compiled on: x86_64-apple-darwin13.3.0 Build date: 2014-08-13 Compiled with: Apple LLVM version 5.1 (clang-503.0.40) (based on LLVM 3.4svn) Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.2 GnuTLS: 3.2.15 SQLite: 3.8.5

Operating system:

Name: Mac OS X (Darwin 14.0.0 x86_64) Version: 10.10

Contacted Yahoo support... They indicated they suspect Filezilla has a bug, because they have received many calls this past week where customers are no longer able to FTPS to manage their small business hosting. Suggested contacting Filezilla support... This behavior is the exact same from any of three different servers I have, on three different networks, at 3 separate locations... Note: I also have another hosting account with different credentials that also will not connect, from any location.

authentication is the same as my mail account, so I have confirmed many times that the account works for mail...

Status: Resolving address of ftp.aztecura.com Status: Connecting to 67.195.61.90:21... Status: Connection established, waiting for welcome message... Response: 220-Welcome to the Yahoo! Web Hosting FTP server Response: 220-Need help? Get all details at: Response: 220-​http://help.yahoo.com/help/us/webhosting/gftp/ Response: 220- Response: 220-No anonymous logins accepted. Response: 220-Yahoo! Response: 220-Local time is now 07:06. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220 You will be disconnected after 5 minutes of inactivity. Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Status: Verifying certificate... Command: USER tcxnieman@… Status: TLS/SSL connection established. Response: 331 User tcxnieman@… OK. Password required Command: PASS Response: 530 Login authentication failed Error: Critical error: Could not connect to server

I updated my fileZilla to newest version, after that i get FTP folders listed many times. One folder ex. named "folder002" is listed 9 times, one by one, like: folder002 folder002 folder002 folder002 folder002 folder002 folder002 folder002 folder002

This happened after program update.

When I upgraded to 3.9.0.3 (using the update feature within the program so should be a legitimate update) connections failed each time on the two separate FTP servers I connect to (see files). IF I uninstall 3.9.0.3 and re-install 3.9.0.2 (I kept both install packages on my machine) the same servers work fine and connect with no problems. This is a repeatable fault as I have now switched between the two versions a number of times and BOTH sets of settings in the Connection Managers appear to be identical in both versions of the software.

I accidentally dragged over the wrong folder to transfer to my computer (huge number of files and folders in it), and I clicked the Cancel button (red flag with X in it) but it did nothing, then I clicked the Disconnect button (mouse with X over it), and the files kept transferring. I had to close FileZilla to get it to stop (which thankfully stopped the process).

Are these buttons not actually supposed to cancel a transfer or disconnect from the server? If I'm not using it contextually correctly, what exactly is the "current" server it refers to if they're highlighted? I was actually only connected to one server at the time.

A fail or prompt, alert. Anything really would be nice.

Hello,

In the past few versions I'm unable to paste the password into the dialog box displayed when I want to connect to one of the sites from site manager.

I'm using FileZilla 3.9.0.3 on OSX Mavericks.

Is this a bug or I am missing something?

Thanks!

I have been looking for FileZilla Server for Linux everywhere, but so far, no one has created or compiled a version. I checked the forums, but everything I saw was related to the Client software.

I would like to see the ability to remove entries from the Quickconnect menu without having to clear all the entries

I use the FileZilla client to both place and retrieve files on a secure server.

The client is changing the YEAR portion of the timestamp on files from 2014 to 2013.

I have my settings to "preserve timestamp" and the month, day and time remain correct, but the YEAR is changed from 2014 to 2013.

When I transfer a file from my network location to the server, the YEAR changes to 2013.

When I transfer a file from the server to my network, the same thing happens.

DISPLAY observations:

When I simply VIEW files newly placed on the server by a sender other than myself, in FileZilla the YEAR appears changed to 2013. However, when I VIEW that same file on the server with a different FTP tool (such as WinSCP) the YEAR on the file correctly appears as 2014.

Files on my own network that I simply VIEW in FileZilla remain unchanged with the correct 2014 YEAR. The YEAR on my files changes from 2014 to 2013 when I transfer to the server side using FileZilla.

This is NOT solely a display issue, because on files I transfer off the server to my network, the YEAR is actually changed on the file timestamp.

FileZilla Client Version Information:

Version: 3.9.0.3

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2014-08-13 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.2 GnuTLS: 3.2.16 SQLite: 3.8.4.3

Operating system:

Name: Windows 7 (build 7601, Service Pack 1) Version: 6.1 Platform: 32 bit system

Dear Sirs,

Filezilla seems to install the update in normal operating mode but every time i close the app and then open it again it want's to upgrade to version current. this installation is accepted for the duration of the usage but when the program is closed and opened again the update is no longer active.

Although, when you run it in Admin mode it works well.

PS; you guys are really kidding when you have the reams and reams of information how to submit a fault report? Do you really think people are going to read all that to fix a fault? It's easier to get a different product.... Please consider.

Copy of Updte confirm; FileZilla Client

Version: 3.9.0.3

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2014-08-13 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.2 GnuTLS: 3.2.16 SQLite: 3.8.4.3

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64 bit system

Dear Sirs,

Filezilla seems to install the update in normal operating mode but every time i close the app and then open it again it want's to upgrade to version current. this installation is accepted for the duration of the usage but when the program is closed and opened again the update is no longer active.

Although, when you run it in Admin mode it works well.

PS; you guys are really kidding when you have the reams and reams of information how to submit a fault report? Do you really think people are going to read all that to fix a fault? It's easier to get a different product.... Please consider.

Copy of Updte confirm; FileZilla Client

Version: 3.9.0.3

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2014-08-13 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.2 GnuTLS: 3.2.16 SQLite: 3.8.4.3

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64 bit system

When I use FileZilla 3.9.0.3 to log into my CentOS 6 server via SFTP, it seems that
I cannot move files between folders if the file size are large.

Log:-

10:29:10	Status:	Renaming '/root/[subbed by myKSN.NET]RM.E211.140831.HDTV.H264.720p.mp4' to '/home/azunyan/rm/[subbed by myKSN.NET]RM.E211.140831.HDTV.H264.720p.mp4'
10:29:10	Trace:	CSftpControlSocket::SendNextCommand()
10:29:10	Trace:	CSftpControlSocket::RenameSend()
10:29:10	Command:	mv "[subbed by myKSN.NET]RM.E211.140831.HDTV.H264.720p.mp4" "/home/azunyan/rm/[subbed by myKSN.NET]RM.E211.140831.HDTV.H264.720p.mp4"
10:29:12	Error:	mv /root/[subbed by myKSN.NET]RM.E211.140831.HDTV.H264.720p.mp4 /home/azunyan/rm/[subbed by myKSN.NET]RM.E211.140831.HDTV.H264.720p.mp4: failure
10:29:12	Trace:	CSftpControlSocket::ResetOperation(2)
10:29:12	Trace:	CControlSocket::ResetOperation(2)
10:29:12	Status:	Renaming '/root/[subbed by myKSN.Net]Running.Man.E210.140824.HDTV.x264.720p.mp4' to '/home/azunyan/rm/[subbed by myKSN.Net]Running.Man.E210.140824.HDTV.x264.720p.mp4'
10:29:12	Trace:	CSftpControlSocket::SendNextCommand()
10:29:12	Trace:	CSftpControlSocket::RenameSend()
10:29:12	Command:	mv "[subbed by myKSN.Net]Running.Man.E210.140824.HDTV.x264.720p.mp4" "/home/azunyan/rm/[subbed by myKSN.Net]Running.Man.E210.140824.HDTV.x264.720p.mp4"
10:29:13	Error:	mv /root/[subbed by myKSN.Net]Running.Man.E210.140824.HDTV.x264.720p.mp4 /home/azunyan/rm/[subbed by myKSN.Net]Running.Man.E210.140824.HDTV.x264.720p.mp4: failure
10:29:13	Trace:	CSftpControlSocket::ResetOperation(2)
10:29:13	Trace:	CControlSocket::ResetOperation(2)

Using the 'mv' command itself in a SSH session and it works fine.
If the file size are small (less than 50Mb or so), the moving process will work OK.
The files in the log above is at least 1.5GB in size.

I have monitor set to 1080 resolution but the new file zilla client 3.9.0.3 blinks when I click the remote host folder to list contents in SFTP session. Eventually after several incidents the system crashes with blue screen of death

The last two times I did an update I was unable to connect. Eventually, after a week or so it started working again and had no issues connecting until the next update. Now I am getting the same error as last time

Status: Connecting to 184.168.152.24:21... Error: Connection timed out Error: Could not connect to server Status: Waiting to retry... Status: Connecting to 184.168.152.24:21...

After installing a new update 3.9.0.5 my quick connect data is lost and I have to enter all the data and passwords etc again.

Last use of Filezilla mid July. Now using it again I was offered an update. I confirmed, update was done, but then all my 5 server addresses stored in the old version had gone. Is there a possibility to get them back? Actual version is 3.9.0.5, Win 7 ultimate.

When I open FileZilla, A dialog opens, letting me know version 3.9.0.5 is available. I click 'Install new version', It downloads and unzips a .tar.bz2. And then tells me a new version is available. When I click 'Install new version', It downloads and unzips a .tar.bz2. And then tells me a new version is available. When I click 'Install new version', It downloads and unzips a .tar.bz2. And then tells me a new version is available. When I click ...