Custom Query (4044 matches)

I connect to SCO UNIX ftp server. I use polish version of FileZilla Client. Files/directories with modification date in October ('październik' in polish) have wrong name in server side view panel. I can't use this files/directories (get, open, ...). I think diacritical character 'ź' is the reason for this bug. Name of directory is: 'mounth day time realname', for example: 'paź 21 9:21 adm' (modification date of this file/directory is 21st October)

Example of this situation you can see on attached picture.

Sorry for my English.

I connect to a FTP via "Quick Connect" or using the "Site Manager" (in Spanish "Conexión rápida" and "Gestor de Sitios", respectively), then disconnect and close FileZilla and open FileZilla again, pressing Ctrl + R automatically reconnects to the last ftp server, without asking password.

I have not told filezilla to save any password, nor did in the past. I tried to Quick Connect to a server I've never connected in the past, and then closing, opening and reconnecting still did the login without password.

If I don't have told explicitly to do so, FileZilla should not remember any password. So, even at 'Reconnect', FileZilla should ask me for the password.

When a new tab is opened the synchronized browsing button stays on, but synchronized browsing is off

Randomly wont resume on uploading. Starts from the beginning. also happened in 3.3.0.0 prior versions to this never saw this fault. seems to do the directory listing and sizes right. FTP port 21 mode. windows XP

PC Platform: Vista 64 Home Premium FileZilla Client

Version: 3.3.0

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2009-11-09 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.10 GnuTLS: 2.8.3

During synch browsing, created new directory in server-side tree; click-dragged existing file from lower in the same tree into the new file folder depicted in server side of the display window; I did not create concurrent client-side directory first (planned on downloading as a unit); when click-dropped old file into new directory (once again, this is all occurring on the server side of the display window) Zilla stopped responding immediately.

I have found FileZilla to be very stable. I just installed v. 3.3.0.1 amd it crashed the first time I used it.

I have attached the crash report XP created in case it helps...

Regards,

John

Since I received the last version of FZ, I can't upload files on my URL without a message ("file already exist : enter a new name") I tried to change my settings concerning new files but it's staying with the same bug ?

The Automatic Update feature fails to save the downloaded setup if you specify a name other than it's original name and/or if you try to save it to a folddeer other than the default folder(Tried all combinations).

I don't have a lot of experience with the update log that Filezilla generates but, at a glance, it seems to indicate a successfull download (i have included the last download attempt log for review).

When name contains polish character such as: ółęćż [I tested only such cases] I'm not able to download this file.[ sample name: Skóra.mp3]. I got enough privileges.

Hello,

This is an issue which seems to be previously solved, but I believe it re-appeared at version 3. (The previous ticket #: 4052)

On Solaris 9, when the locale settings are as follows (in /etc/default/init)

LC_COLLATE=tr_TR.UTF-8 LC_CTYPE=tr_TR.UTF-8 LC_MESSAGES=C LC_MONETARY=tr_TR.UTF-8 LC_NUMERIC=tr_TR.UTF-8 LC_TIME=tr_TR.UTF-8

the folder list is incorrectly parsed and the filenames shows like this:

Kas 16 13:47 .bash_history Eki 23 2008 .profile

(This part is the datetime part: Kas 16 13:47)

In FileZilla 3 I get the following Errors: Error: Could not read from transfer socket: ECONNRESET - Connection reset by peer Error: Failed to retrieve directory listing

This only happens on one server I connect to and I can connect and do a directory listing successfully to other servers on the same domain. It doesn't happen in FileZilla version 2 and I can connect and do a file listing on this server with KFTPGrabber so it seems to be an issue with FileZilla 3. I have found that if I go to the view menu and click refresh that sometimes it will reconnect and the directory listing will work but sometimes it won't. It's a difficult bug to squash I'll bet. I have seen others having this same issue in the forum. So just to be clear, I can connect, the error occurs when FileZilla attempts to execute the directory listing on the remote FTP server. The remote FTP server is running Microsoft FTP Service (Version 5.0).

Hello

You will find below the report that shows the connection error I found since 3.2.3 version of the software.

To read you, thank you

Statut : Connexion à 10.10.10.10:21... Statut : Connexion établie, attente du message d'accueil... Réponse : 220 Gene6 FTP Server v3.10.0 (Build 2) ready... Bienvenue sur le serveur ftp de BDM architectes Commande : USER PAYSAGE Réponse : 331 Password required for PAYSAGE. Commande : PASS * Réponse : 230 User PAYSAGE logged in. Commande : SYST Réponse : 215 UNIX Type: L8 Commande : FEAT Réponse : 211-Extensions supported: Réponse : AUTH TLS Réponse : CCC Réponse : CLNT Réponse : CPSV Réponse : EPRT Réponse : EPSV Réponse : MDTM Réponse : MFCT Réponse : MFMT Réponse : MLST type*;size*;create;modify*; Réponse : PASV Réponse : PBSZ Réponse : PROT Réponse : REST STREAM Réponse : SIZE Réponse : SSCN Réponse : TVFS Réponse : UTF8 Réponse : XCRC "filename" SP EP Réponse : XMD5 "filename" SP EP Réponse : XSHA1 "filename" SP EP Réponse : 211 End. Commande : CLNT FileZilla Réponse : 200 Noted. Commande : OPTS UTF8 ON Réponse : 200 UTF8 OPTS ON Statut : Connecté Statut : Récupération du contenu du dossier... Commande : PWD Réponse : 257 "/" is current directory. Commande : TYPE I Réponse : 200 Type set to I. Commande : PASV Réponse : 227 Entering Passive Mode (10,10,10,10,88,80) Commande : MLSD Erreur : Déconnecté du serveur : ECONNABORTED - Connection aborted Erreur : Échec lors de la récupération du contenu du dossier

Download set to auto resume, queue the file twice, then start download. it will download in 2 different thread, to the same location, same local file(auto rename disabled). the result file is corrupt. Using FIlezilla 3.3.0.1

During file transfer the message loop is not running enough frequently, so it looks like FileZilla is frozen because of file transfer, but it works. The progress bar refreshes only in every 5-30 seconds, or more. Resizing, moving the app. window takes long time.

It did not freeze, just does not like to communicate with the user. :-)

Servertype: FTPES - FTP over explicit TLS/SSL. With standard / simple servers works ok.

When processing a large queue of thousands of files, the process will often get stuck after transfering the first 4096 bytes of a file. The process can be manually unstuck by stopping and restarting the processing of the queue.

Filezilla v3.3.0.1 Windows XP 32-bit, fully patched.

In site mananger I have a profile with "[x] Use Synchronized Browsing" set. After disconnecting,

• using "Reconnnect to last used server" (icon)
• or Server -> Reconnect

synchronization is lost.

Works fine, of course, when reconnect through Site manager.

I am trying to GET a file from a remote FTP site to my local hard drive by dragging and dropping the file from the right pane to the left pane. The transfer works fine on regular file names in the exact same folder that only have normal English characters in them.

However, the filenames that have French characters in them are not transmitted because the foreign symbols are confusing the parser and turning into question marks (?).

How can I transfer these files with French characters in them?

Thank you.

Here is my Log:

16:54:55 Command: TYPE I 16:54:55 Response: 200 Type set to IMAGE. 16:55:02 Status: Resolving address of ftp.canadapost.ca 16:55:02 Status: Connecting to 66.110.6.55:21... 16:55:02 Status: Connection established, waiting for welcome message... 16:55:02 Response: 220 frontend.canadapost.ca X2 WS_FTP Server 5.0.5 (3420342155) 16:55:02 Command: USER 3pvendor 16:55:02 Response: 331 Password required 16:55:02 Command: PASS 16:55:02 Response: 230 user logged in 16:55:02 Command: OPTS UTF8 ON 16:55:02 Response: 501 invalid option 16:55:02 Status: Connected 16:55:02 Status: Starting download of /users/3pvendor/CACOMMON/2. Specifications/2.1 Labels and Customs Forms/2.1.1 Domestic Label Specifications/3509A F_Code à barres bidimensionnel à grille de données pour les produits de distribution du régime intérieur de la SCP.pdf 16:55:02 Command: CWD /users/3pvendor/CACOMMON/2. Specifications/2.1 Labels and Customs Forms/2.1.1 Domestic Label Specifications 16:55:02 Response: 250 CWD successful 16:55:02 Command: TYPE I 16:55:02 Response: 200 Type set to IMAGE. 16:55:02 Command: PASV 16:55:02 Response: 227 Entering Passive Mode (66,110,6,55,157,65) 16:55:02 Command: RETR 3509A F_Code à barres bidimensionnel à grille de données pour les produits de distribution du régime intérieur de la SCP.pdf 16:55:02 Response: 550 3509A F_Code ?? barres bidimensionnel ?? grille de donn??es pour les produits de distribution du r??gime int??rieur de la SCP.pdf: cannot find specified file 16:55:02 Error: Critical error

Some subs (long names or including spaces in names) are invisible for Mac users of FilZilla. Thanks

When remote file search is initiated after connecting to a remote UNIX server; and the relevent file name is put and SERACH button is pressed : the dialog box named "Target file already exists" appears for each file in that remote directory.

e.g. if I serach for test.scr file and the remote directory has 100 .scr files; that dialog box appears again and again for each of the files.

Since, this is only a SEARCH operation and we are not transferring a file; the above metioned dialog box should not appear when we serach for file.

Since upgrading to 3.3.0.1, the shell extension for drag and drop isn't functional anymore. Dragging files from remote side to desktop gets a "no smoking" symbol.

Reboot didn't help.

Uninstall and re-install (triple checking that shell extension was installed) + reboot didn't help.

No error messages, it just doesn't allow drag and drop.

I am using the mac version of filezilla.

When i click on a folder it sometimes opens up the dialog that allows me to edit the name of the folder. But if you leave that dialog open then double click the same folder it takes you to that folders contents and the folder or file at the same position as the previous dialog is still open, deselected that folder makes the name change. Thus saving the file/folder with the incorrect name.

Hi,

Since the 3 last versions (3.3.0.1, 3.3.0 and 3.2.8.1), from time time, when I download from my server (Ubuntu Desktop 8.04) a list of files, the download stops without any error message and without reason. I just do a right click, then uncheck 'Traiter la file d'attente' and then recheck and the download restart until it stops again at a later time, on the same file or not. I was unable to focus a type of file, a file size or something.

I never have this problem with the 3.2.8 and previous versions.

FileZilla Client

Version: 3.3.0.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2009-11-15 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.10 GnuTLS: 2.8.3

I'm a chinese. When I download files from my own Nas server. My server's language setting is Chinese (unicode 8). When I use Cuteftp8.3 , My directory and files'name could be display correctly. But when I use Filezilla, it is displayed correctly begin. But when I doubleclick my chinese filename or directory's name, It is displayed as messy code.

When FileZilla updates on Windows automatically (latest update was to 3.3.0.1), it uninstalls the previous version first.

This is annoying, because the startmenu sorting is broken afterwards when sorted alphabetically. It also forgets the folder "Local site:", which needs to be set again manually after an update.

The NSIS installer should be changed to just overwrite what needs to be overwritten without uninstalling the previous version first.

Using FileZilla 3.3.0.1 connecting to the popular FTP server vsftpd, we cannot access directories with trailing spaces.

Reading the changelog of 3.2.8rc1 suggested this has been fixed, but it is not.

Digging in deeper in all the tickets revealed that the server needs MLDS support, which vsftpd does not, so this has not been fixed for this case.

FileZilla Version: 3.3.0.1 After making Counter-Strike Map named map4.bsp, using filezilla transferred it to godaddy webserver(successfully,)attempted to send it to gameserver via ftp/filezilla. Filezilla transferred 0 byte file multiple times, finally stopping with a 0byte file correctly named. Solutions tried deletion of file on server, and client recompiling the map and attempted to upload again same results.

It takes 1 - 15 mins. to start FileZilla after clicking on the icon.

It is installed on 5 computers, and it the same on all of them.

It is not all the times it takes long time to start. But most of the times it is.

All the computers is: WinXp + SP3 Kaspersky Antivirus/Firewall. (Have try to disable it)

I have try many differen version of the FileZille but it is the same on all of them.

Every time I download a file, it gets to 100% and then stays there. I have used checksums to verify that the download has completed and then remove the download but when I add a new one it says: "ftpcontrolsocket.cpp(1819): Waiting for replies to skip before sending next command... caller=0p2e53e08" this happens in version 3.3.0.1 on Windows and Linux ( the caller is different under linux)

Hello I am running windows 7 and was using version 3.2.8.1 which was working OK, then I upgraded to 3.3.0.1 and it ran after the upgrade. But after closing the program, I always get the message missing mingvw10.dll and please reinstall the program. The mingvm10.dll is in the FileZilla folder. I have tried to reinstall the old version and now I have the same problem. I have to reinstall the program to get it to work one time.

Any Ideas?

Thanks

Ray

Error: Critical error Error: Could not connect to server

This happens while the logon process to several servers since the update to 3.3.0.1

FileZilla Client

Version: 3.3.0.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2009-11-15 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.10 GnuTLS: 2.8.3

I got disapointed to discover that the "Host" field in Filezilla Site Manager DOES NOT accept the string "ftp." preceding the domain.

MOST FAMOUS ftp clients as Cute FTP, allow you to use this syntax for HOST: "ftp.site.com" BUT filezilla seems to be unable to connect just because of this "ignorable" redundance in the HOST typed.

I believe that with a few lines of code you could ignore "ftp." or even alert the user: "Please inform only the domain!" what makes no sense, because if the program noticed that the user input has "ftp." in the beginning, it should simply remove internally by code and SIMPLY CONNECT SUCCESSFULLY.

I am starting to use Filezilla (as I am Open Source lover) but I found it so ridiculous that the program DOESN'T connect JUST because you wrote "ftp." before the domain, because MOST ftp programs accept this and it is NOT incorrect.

I didn't test it on Linux, so I can not afirm that the behaviour is Windows-only or not.

Please add this little intelligence in Filezilla, it is so bad that the program is unable to see that "ftp.site.com" is the ftp of "site.com"

Please read the following situation:

• 2 PCs one with win7 x64 and one with XP Pro. x86
• 1:1 FTP Config on both computers
• more than 5 ftp servers, which work on both PCs

The Problem:

• one ftp server (vsftpd) work only on Win XP !
• one both computers ftp on browser works with this vsftpd ftp server...

That mean ​ftp://user:pw@host works

• the problem occurs at different networks

So you see the problem is filezilla :(

Antwort: 230 Login successful. Befehl: OPTS UTF8 ON Antwort: 200 Always in UTF8 mode. Status: Verbunden Status: Empfange Verzeichnisinhalt... Befehl: PWD Antwort: 257 "/" Befehl: TYPE I Antwort: 200 Switching to Binary mode. Befehl: PASV Antwort: 227 Entering Passive Mode (192,168,4,101,108,36) Status: Vom Server gesendete Adresse für den Passiv-Modus ist nicht routingfähig. Passiv-Modus fehlgeschlagen. Befehl: PORT 141,70,82,221,195,127 Antwort: 200 PORT command successful. Consider using PASV. Befehl: LIST Fehler: Zeitüberschreitung der Verbindung Fehler: Verzeichnisinhalt konnte nicht empfangen werden

Evry time I try to upgrade to the latest version I get "Timer Creation Failed. This has been happenening for evry update I try

I select one folder or file by clicking once, it shows highlighted with blue bar. Then when i again clicks for drag and drop the selected file/folder name becomes text box for renaming it, even though drag and drop works fine.

I think if I clicked another time after some delay then it should not become editable, right?

i get the following error when i try to connect with file zila to my system i.

Response: 257 "QGPL" is current library. Error: Failed to retrieve directory listing Error: Disconnected from server: ECONNABORTED - Connection aborted.

is FTP(file zila) support working with IBM as400)

I recently noticed that a .txt file from a Unix machine was download as binary to a windows machine, even though "txt" is in the ASCII file list. The file is named like filename.20091204.165157742.txt. I am guessing that the reason for this is because it sees the text after the first "." as the extension and not the text after the last "." as the extension. I would contend that only the text after the last "." should be looked at for the extension. This is consistent with how windows works (don't know about other OSes).

In the partial log below, A Windows -> Windows transfer occured. Transfer -> Transfer Type is set to auto. ASP, ASPX, ASPX.CS, and ASPX.VB are text files and should be transferred as ASCII.

Status: Starting upload of C:\...\thankyou.aspx Command: PORT 172,16,1,250,5,97 Response: 200 PORT command successful. Command: STOR thankyou.aspx Response: 150 Opening BINARY mode data connection for thankyou.aspx. Response: 226 Transfer complete. Status: File transfer successful Status: Starting upload of C:\...\thankyou.aspx.vb Command: PORT 172,16,1,250,5,98 Response: 200 PORT command successful. Command: STOR thankyou.aspx.vb Response: 150 Opening BINARY mode data connection for thankyou.aspx.vb. Response: 226 Transfer complete. Status: File transfer successful

We have a file that is 2200600481 bytes. When using the FileZilla client (3.3.0.1), that large file is not displayed. It is displayed using other FTP clients.

FileZilla 3.3.0.1 has been working fine until today. The software update was from Apple to update Airport Utility. But I don't think that would cause FileZilla not to launch.

Attached is the crash report sent to Apple and also the FileZilla Diagnostic report.

My System: MacPro 3,1 (Early 2008) Processors: 2 x 2.8GHz 8 core Intel Xeon Kernel Mode: 64-bit Memory: 18GB Disks: 1 x 320GB, 2 x 1TB, 1 x 2TB Optical Drive: Apple SuperDrive WebCam: Logitech Pro-9000 Modem: Apple External Network: 1GB Ethernet Network drive: 1 x Apple 2TB Time Capsule

Thank you, Don Leckie

Edit->Settings->File exist action

Set the value of Downloads to "Overwrite file if size differs or source file is newer" behave incorrectly as "Ask for action". It worked correctly if set to "Overwrite file source file is newer".

Howdy, I believe I've found some bugs with this matter, my steps are:

Test 1: -Created a file with name: pois.. a á é ã lção.txt -Used Windows commandline to upload the file -Open FileZilla client to download the file, but, got this:

--- When i entered the directory to where i uploaded the file got:

Command: PASV Response: 227 Entering Passive Mode (195,23,114,74,244,101). Command: MLSD Response: 150 Opening ASCII mode data connection for MLSD Status: Invalid character sequence received, disabling UTF-8. Select UTF-8 option in site manager to force UTF-8. Response: 226 Transfer complete Status: Directory listing successful

When i try to download the file i get:

Command: RETR pois.. a á é ã lção.txt Response: 550 pois.. a á é ã lção.txt: No such file or directory Error: Critical error

but is i try to delete the file, it is able to do it:

Command: DELE pois.. a á é ã lção.txt Response: 250 DELE command successful ---

Test 2: -Created a file with name: aaaaaaaapois.. a á é ã lção.txt -Uploaded with Windows command line, but i set this parameters: ftp> quote opts utf8 on 200 UTF8 set to on ftp> mput aaa* 200 PORT command successful 150 Opening BINARY mode data connection for aaaaaaaapois.. a ß Ú Ò lþÒo.txt 226 Transfer complete

-Tried to download it via Filezilla client, but when i entered the dir where the file was uploaded, i get the same: Command: CWD /bugs Response: 250 CWD command successful Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (195,23,114,74,246,167). Command: MLSD Response: 150 Opening ASCII mode data connection for MLSD Status: Invalid character sequence received, disabling UTF-8. Select UTF-8 option in site manager to force UTF-8. Response: 226 Transfer complete Status: Directory listing successful

if i try to download it, it doesn't work like in test 1, but delete works aswell.

Command: RETR aaaaaaaapois.. a á é ã lção.txt Response: 550 aaaaaaaapois.. a á é ã lção.txt: No such file or directory Error: Critical error Command: DELE aaaaaaaapois.. a á é ã lção.txt Response: 250 DELE command successful

FileZilla versios is: 3.3.0.1

maybe Filezilla client, show not use the UTF8 option, or maybe:

-IT could exist an option, in configuration, to enable or disable the: -When download fails, try to download the file without UTF8

An ideia that maybe could resolve this issue.

My Setup: FileZilla Client 3.3.0.1 on Windows 7 and Windows Server 2008 R2, Apple's FTP sharing server on MacOSX 10.6.2, working in gigabit local area network.

After I updated FileZilla to the current version on Win7, I successfully transfered 5 files to the FTP server. It was always the same file, I just modified it multiple times between the uploads. So after uploading this file 5 times, I tried to upload it another time. FileZilla tried to start the download, but instantly after starting, the network connection gets broken - I don't have any connection to my network now. I can use Windows' "troubleshoot problems" feature from the network icon's context menu, which will say the following:

Problems found The connection between your access point, router, or dable modem and the Internet is broken -- Detected The default gateway is not available -- Fixed

After that, the network connection works fine. But as soon as I start a transfer with FileZilla, it breaks every time. This is permanent, restarting FileZilla or rebooting Windows does not help.

FTP transfers with the Windows Explorer work fine.

I also tested this on Windows Server 2008 R2. The issue is quite the same except that instead of breaking the network connection, FileZilla instantly freezes the whole OS when uploading the file for the 6th time and afterwards. There isn't even a bluescreen, and no way to recover except for the reset button on my PC. The server is installed on the same hardware as 7. I had Windows XP installed on it before, and there were no issues with FileZilla.

I had an older version of FileZilla (can't remember which one) installed on Windows 7 before updating to 3.3.0.1, it showed the same behaviour. After updating, it did 5 successful transfers and then re-entered this permanent error state.

It might be a driver problem, but I see no reason why the transfer would succeed the first 5 times and fail afterwards - there has to be some FileZilla-specific problem behind it. Also, there are no problems with the Windows Explorer FTP feature.

I had some folders in which were uploaded some hidden linux files *.*~ (with a trailing tilde). I was unable to view these files and delete folders that contained them. (I solved using winscp who recognize them)

Hello,

I am creating hosts in the Site Manager portion of Filezilla but the port numbers for some sites that do not use the default port 21 are not saving. I am having to connect to some SSL/TLS connections and they require port 990. After I manually put in port 990 in Site Manager for a site that requires an SSL/TLS connection I am able to connect but if I restart Filezilla the port number is lost and it tries to revert back to using port 21.

The verion of Filezilla I am running is 3.3.0.1. Any help is greatly appreciated.

Regards, Troy

Sometimes (from time to time, maybe this depend on mix utf8 and iso-8859-2 coding and server configuration) I have a problem with download files contains specific characters such as ą,ę,ł,ż,ź,ć,ń (from polish language). These names of files are displayed correctly but transfer ends in failure.

Hello.

When I connect to my FTP, or what its called, I get this message at the end: Error: Failed to retrieve directory listing

How can I fix that? I really want to transfer files from my FTP to my PC.

Server ftp in UTF8 mode. The problem is that I have many files with the same foreign char in name (as ą or ł or ć or ż, etc.) but only a few of them (of files) are not able to download. So when I take such kind of file from "failed transfers" and rename it (get rid of the char from name) and restore back the name (again rename and write the missing char) I'm able to download this file.

This has been the case for several versions now. I have some subdirectories in my web account that begin with a period/dot ".". I can enter the directories manually in the address bar of FZ, but they otherwise will not show in the server file list.

I see two tickets concerning Filezilla and Comcast have been closed with the comment that it must be a server issue. I can log on with version 2.1.13a which I've kept around specifically for this purpose, however, none of the 3 builds will.

2.2.13a: Status: Connecting to upload.comcast.net ... Status: Connected with upload.comcast.net. Waiting for welcome message... Response: 220 FTP server (Version 5.339PWS/AI) ready. Command: USER jonljacobi Response: 331 Password required for jonljacobi. Command: PASS Response: 230 User jonljacobi logged in. Command: FEAT Response: 500 'FEAT': command not understood. Command: SYST Response: 215 UNIX Type: L8 Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current directory. Command: PORT 192,168,1,101,6,86 Response: 200 PORT command successful. Command: TYPE A Response: 200 Type set to A. Command: LIST Response: 150 Opening ASCII mode data connection for /bin/ls. Response: 226 Transfer complete. Status: Directory listing successful

3.3.0.1: Status: Resolving address of upload.comcast.net Status: Connecting to 216.87.188.9:21... Status: Connection established, waiting for welcome message... Response: 220 FTP server (Version 5.339PWS/AI) ready. Command: USER jonljacobi Response: 331 Password required for jonljacobi. Command: PASS Response: 230 User jonljacobi logged in. Command: SYST Response: 215 UNIX Type: L8 Command: FEAT Response: 500 'FEAT': command not understood. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current directory. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (216,87,188,9,217,140) Command: LIST Response: 150 Opening BINARY mode data connection for /bin/ls. Response: 426 Data connection error: No child processes. Error: Failed to retrieve directory listing Error: Connection closed by server

I'm not real up on ftp, but the one is opening an ASCII connection and the other binary. I've tried forcing ASCII with the transfer menu but it seems to have no effect.

If this is a server issue (no other FTP client fails to list but I do see the child processes message with Firefox) please let me know what it is so I can speak with knowledge to the tech people.

operating system Win XP sp 3 on a daul core Intel processor

I often use many files for editing at the same time in one editor session( Textpad 5.3.1 from Helois Softwae solutions) . In the editor is the option 'Allow multiple instances to run' set to NO. When I open a selection of files the editor runs more than one time with a varying number of files opened. Quite annoying when one has to do the same changes for each opened session. I don't meet this problem when I use Explorer or WS-FTP 95 LE

When I click the tab on the remote server to sort by FILENAME, the list comes up in 2 sections, both alphabetized. Why does the list go A-Z and then start over at A-Z???

Screen capture here: ​http://www.gonegraphics.com/misc/filezilla.jpg

When a connection is done by entering the server, user, password and port, the background of the quick connect bar and of the menu bar gets overriden by the status information.

when connecting to SFTP-Filezilla Server, I can not resume files anymore. It always starts from the beginning. This used to work with older versions. Server configuration has not been changed, just client updated. Log is attached.

FileZilla Client version 3.3.1:

Version: 3.3.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2010-01-03 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.10 GnuTLS: 2.8.3

- FileZilla Server version 0.9.31 beta

When under Remote Desktop session, attempt to bring FileZilla from the system tray will hang FileZilla.

I keep geting this error.

Response: 530 User topupdepot cannot log in. Error: Critical error Error: Could not connect to serve

I had problems due to a bad translated item in the Portuguese language because the term used to translate the act of "entering a directory" (In portuguese up to now shows "Inserir diretório" - what is wrong in my oppinion) means "insert" and entering is one thing and inserting is another very different thing.

The way it is now ("Inserir diretório") suggests that clicking the folder, a NEW SUB DIRECTORY will be created inside the folder instead of opening it.

IMHO the best translation for the act of "entering/browsing a directory/folder" would be "Entrar no diretório" that means to "Go into the directory".

This words "Inserir diretório" must be changed, this expression is only valid when you are CREATING a sub directory not when you are just browsing it.

The correct translation for this item is "Entrar no diretório"

I cannot delete a file because I do not have permissions to. I chmod the file to 777 but the response is: Command: SITE CHMOD 744 index.php Response: 550 Could not change perms on index.php: Operation not permitted

Chmod the directory to recurse into the file doesn't work either.

I have multiple accounts for a variety of different people and it is sometimes necessary to switch to another account using the filezilla client. Generally when I do this the directory listing of the previous connection is still displayed even though I have opened a new connection. The only way I can display the new listing is by exiting the filezilla client and restarting it using the new connection.

I use Filezilla client 3.3.1 on XP. I can view the ftp site through IE shows correct year but in Filezilla shows everything 2010 instead.

I attach picture as 1st screen print is from IE and 2nd screen print from Filzilla

hi, when i type filezilla in terminal it opens unstable and terminates with "Segmentation fault" stderr; i know i could chroot and set W/D to /user/lib/filezilla3 ( though never tried that )

just an unexpected behavior, not a bug

Hi,

1) We have a rapidSSL wildcard SSL certificate such as *.domainname.com and when I connect to something.domainname.com, filezilla still gives me the warning, even though it is a valid SSL certificate which is recognized without warning by both firefox and internet explorer over regular https.

Once we accept the certificate once, we never have the issue again (as long as we select to save our answer so it doesn't ask again)

however, it would be nice if filezilla could authenticate wildcard certs similar to what IE and firefox do over regular https for wildcard certs.

2) There is no way to see the downloaded SSL certificates so that you can review the list / clear it if necessary to force an full SSL cert check again at the next connection. (If there is a way, I couldn't find it).

hello i've got a problem with filezilla and it hasn't been corrected with the last release. my problem is: when i send more than one file on my 'freebox' (wich is a multimedia box gaved by my internet provider 'free' in france) make me a windows blue error with memory cache copy on the hardisk. I didn't have that problem before with vista but it have appeared with my new operating system windows 7 v7100. my computer is a vaio vgn-fw11M

When I drag and drop a file from the windows browser on to the FileZilla window (open on the FTP server page) the file uploads corretly. However after it is completed, I get another pop-up asking to overwrite the file. It seems that a second upload wants to start with the same file.

This started happening about 1-2 weeks ago,

Pressing TAB cycles the keyboard focus between the UI elements of the screen, including the Quickconnect toolbar, Local site and Remote site paths, directory trees, and file lists.

Pressing CTRL+TAB should change tabs, but instead it functions the same as TAB, until/unless the focus is currently on the Local site or Remote site path fields, at which point it functions normally until focus changes.

Product FileZilla Client 3.3.1 ​https://www.ohloh.net/projects/filezilla/download?filename=FileZilla_3.3.1_win32.zip

The client version was downloaded on Wednesday, January 06, 2010, 6:47:07 PM.

The client file name: FileZilla_3.3.1_win32.zip

The link used to get the file: ​http://d10xg45o6p6dbl.cloudfront.net/projects/f/filezilla/FileZilla_3.3.1_win32.zip

Originally, the file as shown by Windows XP, displayed a file size of 15,569 bytes. I uploaded the file to the Linux server and FileZilla read a file size of 15,501 bytes even though Windows reported a 15,569 byte file size.

I discovered that one specific character within the file caused the problems. I believe it was a null (character 0) character that caused the problems. Anyways, I do not know if FileZilla 3.3.1 failed to report the size correctly or if the Linux OS failed to report the size correctly. FileZilla showed two different sizes for the files on the two different systems.

I copied and pasted what I thought was text to a file but it had a character in it that SciTE accepted (but displayed as a space character Hex:20h, Decimal:32). I ran into this problem once before a long time ago, but I believe I used WS-FTP32 in that case.

Anyways, the problem that exists with FileZilla, as I see it, is that FileZilla would be a little better if it analyzed the file before it uploaded it, and if FileZilla found a binary character in an ASCII (text) file, it probably should alert the user.

One other thing, if it detects that the uploaded file is 15,501 bytes while the file to get uploaded (the source) is 15,569, I feel it should report that to the user with a possible explanation for the differences in size.

Thank you for your time.

-- James Carlock aka, Jim Carlock

When i doubleclick an afp-file the file will be transferred to the temporary folder and the associated program (AFPBROWSE.exe from Beta Systems) is started, but the browser does not open the file.

Hello,
I've got a folder on my FTP server, with a space as name. It is impossible to access this folder using FileZilla Client. It looks like FileZilla takes the last modified date in a weird format (Jan 18 15:38) as "name" (and doesn't show anything in the "last modified" column), so the folder is "not found" when I'm trying to do anything with it.
I hope you can fix this annoying bug...

Hi Earlier,

One of my user is able to connect to one site through filezilla.But some days back when my network engineer did a change in routing.He is unable to connect to it.

However i am able to connect to the site from same office with freshly installed filezilla.Is there any option to clean the old value stored in users pc.I have uninstalled and reinstalled filezilla in the user pc but still no luck.

Regards sk

With filezilla set to passive mode, a new connection to the server is created. This session will remain logged in for the duration of the server timeout setting. However, if a file is transfered during this session, as soon as the file is uploaded, we see about 55 seconds before the connection times out. For whatever reason, the time out seems to change after a file is uploaded.

I have my default "File Exists Action" set to "Ask For Action". I connect to a server by FTP. The first time I upload a file it asks me what action to take and I choose "Overwrite" and I do not select the "Always use this action" box. I can repeat this upload many times and it behaves correctly allowing me to choose to overwrite. After I have worked on something else for a while while leaving Filezilla running, making code modifications, for example, I then upload the same file again and it has forgotten that I want to be asked about overwriting.

The client continues to fail to prompt me until I restart the application, then it behaves properly again for an undefined period of time. The method I am using to trigger an upload is to drag a file from an Explorer window into the file list box of the Filezilla GUI. The times it has occurred, Filezilla has always been partially hidden behind other applications but I don't know how that affects it.

I will try some additional testing and see if I can reliably reproduce the problem.

Hello !

It's really bad:I cannot connect to any server and it's not a firewall issue [the build-in windows ftp-client CAN!]. So far I remember, a do not know which previous version was usable for me.

Would be great, someone has a look onto this.

Thanks, --mabra

Updated my installation to version 3.3.1 on Saturday.

FileZilla Client

Version: 3.3.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2010-01-03 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.10 GnuTLS: 2.8.3

I maintain three Windows Sites at AMHOSTING.COM. These all require ACTIVE transfer mode. Now, all three sites no longer work with FileZilla.

The earlier version worked fine. Native FTP sessions with (from Windows NT; Windows Vista 32 and 64 bit) FTP sessions using SMARTFTP (using ACTIVE transfer) work fine.

Your latest version doesn't work. Here is a log Filezilla ... and SMARTFTP

Filezilla =================================== Status: Resolving address of www.powersportsads.net Status: Connecting to 204.10.137.244:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER XXXXXXX Response: 331 Password required for XXXXXX. Command: PASS Response: 230 User XXXXXX logged in. Status: Connected Status: Retrieving directory listing... Command: CWD /httpdocs Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PORT 24,211,50,212,5,57 Response: 500 Invalid PORT Command. Command: PASV Response: 227 Entering Passive Mode (204,10,137,244,10,195). Command: LIST Response: 425 Can't open data connection. Error: Failed to retrieve directory listing

SMARTFTP [03:49:21] SmartFTP v4.0.1072.0 [03:49:21] Resolving host name "www.powersportsads.net" [03:49:21] Connecting to 204.10.137.244 Port: 21 [03:49:21] Connected to www.powersportsads.net. [03:49:21] 220 Microsoft FTP Service [03:49:21] USER XXXXXX [03:49:21] 331 Password required for XXXXXX. [03:49:21] PASS (hidden) [03:49:21] 230 User XXXXXX logged in. [03:49:21] SYST [03:49:21] 215 Windows_NT [03:49:21] Detected Server Type: Windows NT [03:49:21] RTT: 124.972 ms [03:49:21] FEAT [03:49:22] 211-FEAT [03:49:22] SIZE [03:49:22] MDTM [03:49:22] 211 END [03:49:22] TYPE I [03:49:22] 200 Type set to I. [03:49:22] REST 0 [03:49:22] 350 Restarting at 0. [03:49:22] PWD [03:49:22] 257 "/" is current directory. [03:49:22] CWD /httpdocs [03:49:23] 250 CWD command successful. [03:49:23] PWD [03:49:23] 257 "/httpdocs" is current directory. [03:49:23] TYPE A [03:49:23] 200 Type set to A. [03:49:23] PORT 192,168,1,104,5,62 [03:49:23] 200 PORT command successful. [03:49:23] LIST -aL [03:49:23] 150 Opening ASCII mode data connection for /bin/ls. [03:49:23] 3296 bytes transferred. (24.7 KB/s) (130 ms) [03:49:23] 226 Transfer complete. [03:49:23] MDTM _vti_inf.html [03:49:24] 213 20091110104827 [03:49:24] Time zone offset: -28800 seconds (-8.0 hours)

HOPE THIS HELPS

I am trying to connect to a server that must be in active mode due to the firewall. I have changed the transfer setting from default to active. FZ during the connection sends a passive mode command to the server and then I get dumped out. We have verified all the settings for the transfer, but when the passive command gets sent the connection fails.

I am running Win <font style='color:black; background-color:Yellow;'>XP</font> <font style='color:black; background-color:Yellow;'>SP2</font> <font style='color:black; background-color:Yellow;'><font style='color:black; background-color:Yellow;'>Filezilla</font></font> <font style='color:black; background-color:Yellow;'>v3</font>.3.1

First of all when clicking the toggle processing of the transfer queue button on the toolbar doesn't stay depressed. Also if I double click on any local file it immediately transfers the file even though the button doesn't indicate that processing is enabled AND there is no check on the Transfer > Process Queue menu item. When there are files being transferred then both button and menu change to show that they are enabled from the disabled state. So what's the point? I would like to halt all processing and set up a transfer queue and once I'm done adding and removing files from the queue, I would like to toggle the processing and let <font style='color:black; background-color:Yellow;'><font style='color:black; background-color:Yellow;'>Filezilla</font></font> do its magic.

I would also like to export/import a queue and I'm assuming that's what the menu items do but unfortunately I can't stop <font style='color:black; background-color:Yellow;'><font style='color:black; background-color:Yellow;'>Filezilla</font></font> from transferring in time to test that.

Also if I manage to quickly hit the toggle button while it's transferring I can stop it, but as soon as I add something else to the queue it start back up on its own without any indication that I want it to.

Thank you for all your hard work. <font style='color:black; background-color:Yellow;'><font style='color:black; background-color:Yellow;'>Filezilla</font></font> is an amazing utility.

I got this error when i tried to remote edit a file.

The file 'index.php' cannot be opened: The associated program (WX_DDE#"C:\Program Files\Adobe\Adobe Dreamweaver CS4\Dreamweaver.exe","index.php"##System#) could not be found.

I use Windows 7 and everytime I scroll completely down on the client side to show the last file, Filezilla Client hangs up and all I can do is to close the process. So I won't be able to upload the last item to the server.

Been getting the following message pretty regular since the latest update: FileZilla Client

Version: 3.3.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2010-01-03 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.10 GnuTLS: 2.8.3

Problem:

1st popup: "failed to write xml"

2nd popup: "can't open file 'C:\Users\[myuseracctname]\AppData\Roaming\filezilla\filezilla.xml' (error 1224: the requested orperation cannot be performed on a file with a user-mapped section open.)

!!! I don't recall having user-mapped anything, let alone filezilla.xml !!!

When transfering complex subdirectory structures from a Linux server to Windows 7 Ultimate 64bit, FileZilla client leaks considerable amounts of memory, several kByte per file transferred: after 104245 files in 9000 subdirectories, memory consumption rises to 260 MByte. Further transfers then take hours to complete.

Steps i did: 1)Open filezilla verion 3.2.4.1 2)Click "Nieuwe versie beschikbaar!" button (Im using the Dutch version) 3)Select 3.3.1 (only option available) 4)press volgende (Next) 5)press Opslaan (Save) (without changing default download settings, set to <usernam>/downloads) Result: Popup screen saying "Time creation failed"

When I attempt to connect to Windows 2008 IIS ftp server I manage to connect, however when FileZilla attempts to list the directory contents it fails. Settings the debug level to 4 I see:

Command: LIST Trace: CTransferSocket::OnConnect Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 425 Can't open data connection. Trace: CFtpControlSocket::TransferParseResponse() Trace: code = 4 Trace: state = 4 Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: CFtpControlSocket::ListSubcommandResult() Trace: state = 3 Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Error: Failed to retrieve directory listing Trace: CFileZillaEnginePrivate::ResetOperation(2)

Using the Windows FTP client, I am able to connect and list the directory contents without any error.

I'm not sure if it's relevant or not, but the user ID I have to use includes the domain (i.e. username = <domain>\<user ID>).

we use Filezilla Version 3.3.1 and a generic proxy with socks 5 (dante). the problem is, that the servername will be cut after the 16. character. when we try to connect "emma.tv5paris.org" we get the messages "Could not connect to server" in Filezilla and in the dante-logfile we find "Jan 26 14:48:58 (1264513738) danted[8539]: sockshost2sockaddr(): gethostbyname(emma.tv5paris.or): Unknown host".

Damn you make this hard. When I installed the latest version, it stopped retaining the port number in quickconnnect. If I try to copy the about box I get an error.

Version: 3.3.1 OS: Windows 7 Pro in Windows 2003 domain IPv6 is enabled Editor: UltraEdit 15.20 System: QuadCore AMD 2.8 GHz CPU, 8G RAM, 1TB HDD

Lorsque j'essaie de me connecter avec la version 3.3.1, le logiciel me répond :

Réponse : 421 Vous ne pouvez avoir que 2 connexions simultannees Erreur : Impossible d'établir une connexion au serveur Statut : Délai d'attente de 5 secondes suite à l'échec de la précédente tentative de connexion...

Je n'avais pas ce problème avec la version 2.2.32

I downloaded the new version of FZ as prompted just now. Everything installed as expected, but if I select a server via Site Manager, the address is resolved to an I.P. but the connection is not made. FZ is not hanging or crashing, it's still operable on the client side, but it will not make the connection to the remote server. I've checked access to servers by going through browser and pinging sites etc, so internet connection is good. _ FileZilla Client

Version: 3.3.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2010-01-03 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.10 GnuTLS: 2.8.3

The previous version worked fine. I should have kept it. When I install version 3.3.1 it works fine - once. The next time I try to use it, I get the error, "The application has failed to start because mingwm10.dll was not found. Re-installing the application may fix this problem."

I re-install 3.3.1 and it works - once. Then I have to go through this process again. Why is this happening?

I use Windows XP Media Center Edition 2005 with all updates applied except Service Pack 3.

Bob Pegram San Jose, CA

I am using site specific bookmarks but these are effective only on the local site but not on the remote site of the FTP connection. Are there any rules to specify the remote directory in a bookmark ? I have Filezilla client 3.3.1

Add a site via Site Manager and the password is stored in the sitemanager.xml file in plain text:

<Server>

<Host>testhost</Host> <Port>21</Port> <Protocol>0</Protocol> <Type>0</Type> <User>testuser</User> <Pass>testpwd</Pass> <Logontype>1</Logontype> <TimezoneOffset>0</TimezoneOffset> <PasvMode>MODE_DEFAULT</PasvMode> <MaximumMultipleConnections>0</MaximumMultipleConnections> <EncodingType>Auto</EncodingType> <BypassProxy>0</BypassProxy> <Name>test_security</Name> <Comments /> <LocalDir /> <RemoteDir /> <SyncBrowsing>0</SyncBrowsing> test_security </Server>

Build information: Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2010-01-03 Compiled with: i586-mingw32msvc-gcc(GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against: wxWidgets: 2.8.10 GnuTLS: 2.8.3

When selecting multiple files or folders using Ctrl+Shift in the local or server file browser, the number of Selected files/folders is shown wrong. It seems that the real number of selected files is just added to the previously displayed number of selected files.

Example: Selected 3 files e.g. using Shift (FZ displays "Selected 3 files."). If you go on selecting 2 more files with Ctrl+Shift there are 5 files selected but FZ shows "Selected 8 files." (5 real + 3 form before). Go on selecting 2 more files, FZ shows "Selected 15 files." (7 real + 8 thought from before). And so on..

Version: 3.3.1

(Screenshot attached)

This is not the problem tracked and solved (I searched). This is a new one. Using 3.3.1. When on the remote side there is a file that has a leading blank in the name AND the first letter is a capital one, transfer fails. Using ftpd on FreeBSD 7.2 p4 x86 on remote server. Steps to reproduce:

• go in console on the ftp server and enter the ftp root
• cp any file from the system: cp /var/log/messages .
• from the client all works ok and can transfer messages file
• mv messages \ messages
• from the client it is ok again, with leading space
• mv \ messages \ Messages
• the client fails to transfer the file

Tried with any kind of file/permission combo, blank+capital seems to be the culprit. HTH Bye

FileZilla Client

Version: 3.3.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2010-01-03 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.10 GnuTLS: 2.8.3

There seems to be a bug in directory listening.

The problem folder is named " #complete# ". Using no ssl connection there is no problem with listening this directory, but if I use FTPES the status window gives following error message:

Fehler: GnuTLS error -9: A TLS packet with unexpected length was received. Status: Server hat die TLS-Verbindung nicht ordnungsgemäß geschlossen Fehler: Could not read from transfer socket: ECONNABORTED - Connection aborted

All other directorys work fine. Even subfolders from #complete# are accessible via the direct url.

To solve the problem I tried to force utf8 characters in servermanager settings. This had no effect.

Would be nice if you could resolve this bug.

I can't open anyway catalog with cyrillic titles. I wrote about this bug before. And you send me report — bug fixed. But he still here.)) You can see this on this picture [ ​http://s3.sendpic.ru/i/1022/i/0ZK.jpeg.html] I use XP64bit with all last updates. Also FireFox (Mozilla/5.0 (Windows; U; Windows NT 5.2; en-US; rv:1.9.2) Gecko/20100115 Firefox/3.6 (.NET CLR 3.5.30729) ) too incorrect display those folders. I give to You this link ​ftp://80.64.109.251/ but i don't know how You can enter on it. I think this is part of your local net. And maybe you can't enter in this ftp. Best regards Valentin. Peace!

When navigating through folders a single click very often leads to a file or folder renaming. More than that, sometimes when I double click on the folder - it requests this folder's contents AND activates renaming feature, so when it finishes listing new folder - old renaming box stays on the screen, as if now you are renaming a file or a folder inside this new listed folder. If you hit Return - then a file in this new folder will be renamed to the name of a file from a previous folder.

I think it's a high priority bug, since I had to stop using Filezilla completely.

When visiting a sequence of sites to download log files your system requires a second entry of a password despite the box to remember the password being ticked. Sequence of events -

1. Log onto first site, download, no problem.
2. Log onto second site, closing first option.
3. download but one file requires second entry of password whereas the rest don't.
4. Happens on every subsequent site visited during the session.

Also, why force users to go through several barriers to entry before they can report a bug. I have often not bothered becuase of your beaurocratic insistence on accounts. As a result bugs are not reported on time or at all.

I have written a SHA512 implementation for my own use, and I could not get get the right test results with integer calculations using gcc -O2 or -O3. So I am saying that gcc -O2 and gcc -O3 both generate corrupt, improper code. gcc -O generates good code.

SHA512 involves a lot of shifts, multiplies, adds. I understand packets (if you are doing that) require calculations as well, for calculating length, size, checksums, etc. so there may be some similarities in the calculations.

I suggest you stay away from using -O2 or -O3 and stick with -O for compiler optimization.

You may find some bugs disappear once you switch to -O.

Suggest you do the same with FileZilla Server.

I also use mingw. I used to use mingw, but now I use mingw-w64, since it has TR1 and it can compile 64-bit code.

There is also a known compiler bug I discovered (gcc folk won't fix it - talk to them?) that -fpack-struct does not work with iostream, locale, fstream C++ libraries. It will generate huge numbers of errors. They said something like it is not supposed to work together or something like that. (bolderdash)

These are not a problem with microsoft or borland commercial compilers.

I am basing this bug on the information I obtained in the Help|About dialog where it says "Compiler Flags":

FileZilla Client

Version: 3.3.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2010-01-03 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.10 GnuTLS: 2.8.3

Im using latest Filezilla 3.3.1 version

When i open the filezilla ftp client, it shows the following error.

"​http://..../filezilla.xml not loaded The XML file is not well-formed. Error Reading end tag"

Please advice me on this.

Thanks Dinesh ​http://www.nkdweb.com

If Internet connection breaks, any queue breaks too! There is no way to resume that transfer besides closing FZ, restarting, and new uploading then resume works BUT not always sending the file then completely! File broken! Stopping Queue and then starting again gets always an error: ftpcontrolsocket.cpp(1819): Waiting for replies to skip before sending next command... caller=0x10ae028

I would real recommend to add to the Process Queue etc; something like Pause Queue, and Resume Queue, and to secure that if any Internet connection was broken whilst transferring, that after some timeout and Internet connection is resumed transfer is restarting automatically and not as now crash the connection with that ftpcontrolsocket error! Our Internet connection cuts often off and comes back after 1-2 minutes only...

while dragging files to move them to another folder, if the target folder is above on the list (for instance "..") the panel listing the does not scroll to the top even if you drag near the top (or bottom) of the panel

On a side note: Love your work and been with you for years and will be a whole lot more. Keep up the excellent work

After downloading and starting the new setup for version 3.3.1, I got a dialog window with inconsistent dutch language. (I guess the version number is irrelevant here.)

Controleren op updates

​http://downloads.sourceforge.net/filezilla/FileZilla_3.3.1_win32-setup.exe downloaden

Bestandsoverdracht succesvol

De nieuwste versie is gedownload. Klik op 'Voltooien' om FileZilla af te sluiten en de installatie te starten.

[ < Vorige ] [ Afronden ] [ Annuleren ]

It says "Click on button 'Voltooien'" and then shows the (corresponding) button 'Afronden'. See attached file

Not all icons shown in the various design-skins are shown in the toolbar. Where I can edit my own toolbar - there is no way to do it.

e.g. I'm looking for the button to copy all selected files to my server. (from the left to the right)

Kind regards KH (sorry for my english)

Resume worked in earlier versions tried. This is now version 3.3.1.

I connect to the server, which failed on a 5GB upload with a timeout. When I resume, it starts and immediately fails claiming the user aborted. In debug logging, instead it says:

08:21:36 Error: Disconnected from server: ECONNABORTED - Connection aborted

It then repeats the whole cycle, over and over until I actually do abort it.

Attached is the full log from connection to giving up.

08:21:00 Status: Resolving address of rbac.com 08:21:00 Status: Connecting to 208.68.104.122:21... 08:21:00 Status: Connection established, waiting for welcome message... 08:21:00 Trace: CFtpControlSocket::OnReceive() 08:21:00 Response: 220 192.168.30.26 FTP server ready 08:21:00 Trace: CFtpControlSocket::SendNextCommand() 08:21:00 Command: USER rbacinc 08:21:00 Trace: CFtpControlSocket::OnReceive() 08:21:00 Response: 331 Password required for rbacinc. 08:21:00 Trace: CFtpControlSocket::SendNextCommand() 08:21:00 Command: PASS 08:21:00 Trace: CFtpControlSocket::OnReceive() 08:21:00 Response: 230 User rbacinc logged in. 08:21:00 Trace: CFtpControlSocket::SendNextCommand() 08:21:00 Command: SYST 08:21:00 Trace: CFtpControlSocket::OnReceive() 08:21:00 Response: 215 UNIX Type: L8 08:21:00 Trace: CFtpControlSocket::SendNextCommand() 08:21:00 Command: FEAT 08:21:00 Trace: CFtpControlSocket::OnReceive() 08:21:00 Response: 211-Features: 08:21:00 Trace: CFtpControlSocket::OnReceive() 08:21:00 Response: MDTM 08:21:00 Trace: CFtpControlSocket::OnReceive() 08:21:00 Response: REST STREAM 08:21:00 Response: SIZE 08:21:00 Response: 211 End 08:21:00 Status: Connected 08:21:00 Trace: CFtpControlSocket::ResetOperation(0) 08:21:00 Trace: CControlSocket::ResetOperation(0) 08:21:00 Trace: CFileZillaEnginePrivate::ResetOperation(0) 08:21:00 Status: Retrieving directory listing... 08:21:00 Trace: CFtpControlSocket::SendNextCommand() 08:21:00 Trace: CFtpControlSocket::ChangeDirSend() 08:21:00 Command: CWD /Viewpoints 08:21:01 Trace: CFtpControlSocket::OnReceive() 08:21:01 Response: 250 CWD command successful 08:21:01 Trace: CFtpControlSocket::SendNextCommand() 08:21:01 Trace: CFtpControlSocket::ChangeDirSend() 08:21:01 Command: PWD 08:21:01 Trace: CFtpControlSocket::OnReceive() 08:21:01 Response: 257 "/Viewpoints" is current directory. 08:21:01 Trace: CFtpControlSocket::ResetOperation(0) 08:21:01 Trace: CControlSocket::ResetOperation(0) 08:21:01 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:01 Trace: CFtpControlSocket::ListSubcommandResult() 08:21:01 Trace: state = 1 08:21:01 Trace: CFtpControlSocket::SendNextCommand() 08:21:01 Trace: CFtpControlSocket::TransferSend() 08:21:01 Trace: state = 1 08:21:01 Command: TYPE I 08:21:01 Trace: CFtpControlSocket::OnReceive() 08:21:01 Response: 200 Type set to I 08:21:01 Trace: CFtpControlSocket::TransferParseResponse() 08:21:01 Trace: code = 2 08:21:01 Trace: state = 1 08:21:01 Trace: CFtpControlSocket::SendNextCommand() 08:21:01 Trace: CFtpControlSocket::TransferSend() 08:21:01 Trace: state = 2 08:21:01 Command: PASV 08:21:01 Trace: CFtpControlSocket::OnReceive() 08:21:01 Response: 227 Entering Passive Mode (208,68,104,122,150,29). 08:21:01 Trace: CFtpControlSocket::TransferParseResponse() 08:21:01 Trace: code = 2 08:21:01 Trace: state = 2 08:21:01 Trace: CFtpControlSocket::SendNextCommand() 08:21:01 Trace: CFtpControlSocket::TransferSend() 08:21:01 Trace: state = 4 08:21:01 Command: LIST 08:21:01 Trace: CTransferSocket::OnConnect 08:21:01 Trace: CTransferSocket::OnReceive(), m_transferMode=0 08:21:01 Trace: CFtpControlSocket::OnReceive() 08:21:01 Response: 150 Opening ASCII mode data connection for file list 08:21:01 Trace: CFtpControlSocket::TransferParseResponse() 08:21:01 Trace: code = 1 08:21:01 Trace: state = 4 08:21:01 Trace: CFtpControlSocket::SendNextCommand() 08:21:01 Trace: CFtpControlSocket::TransferSend() 08:21:01 Trace: state = 5 08:21:01 Trace: CTransferSocket::OnReceive(), m_transferMode=0 08:21:01 Trace: CTransferSocket::TransferEnd(1) 08:21:01 Trace: CFtpControlSocket::TransferEnd() 08:21:01 Trace: CFtpControlSocket::OnReceive() 08:21:01 Response: 226 Transfer complete. 08:21:01 Trace: CFtpControlSocket::TransferParseResponse() 08:21:01 Trace: code = 2 08:21:01 Trace: state = 7 08:21:01 Trace: CFtpControlSocket::ResetOperation(0) 08:21:01 Trace: CControlSocket::ResetOperation(0) 08:21:01 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:01 Trace: CFtpControlSocket::ListSubcommandResult() 08:21:01 Trace: state = 3 08:21:01 Trace: CFtpControlSocket::SendNextCommand() 08:21:01 Trace: CFtpControlSocket::ListSend() 08:21:01 Trace: state = 4 08:21:01 Status: Calculating timezone offset of server... 08:21:01 Command: MDTM 2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:02 Trace: CFtpControlSocket::OnReceive() 08:21:02 Response: 213 20100209050928 08:21:02 Trace: CFtpControlSocket::ListParseResponse() 08:21:02 Status: Timezone offsets: Server: 0 seconds. Local: -28800 seconds. Difference: -28800 seconds. 08:21:02 Trace: CFtpControlSocket::ResetOperation(0) 08:21:02 Trace: CControlSocket::ResetOperation(0) 08:21:02 Status: Directory listing successful 08:21:02 Trace: CFileZillaEnginePrivate::ResetOperation(0) 08:21:05 Status: Resolving address of rbac.com 08:21:05 Status: Connecting to 208.68.104.122:21... 08:21:05 Status: Connection established, waiting for welcome message... 08:21:05 Trace: CFtpControlSocket::OnReceive() 08:21:05 Response: 220 192.168.30.26 FTP server ready 08:21:05 Trace: CFtpControlSocket::SendNextCommand() 08:21:05 Command: USER rbacinc 08:21:05 Trace: CFtpControlSocket::OnReceive() 08:21:05 Response: 331 Password required for rbacinc. 08:21:05 Trace: CFtpControlSocket::SendNextCommand() 08:21:05 Command: PASS 08:21:05 Trace: CFtpControlSocket::OnReceive() 08:21:05 Response: 230 User rbacinc logged in. 08:21:05 Status: Connected 08:21:05 Trace: CFtpControlSocket::ResetOperation(0) 08:21:05 Trace: CControlSocket::ResetOperation(0) 08:21:05 Trace: CFileZillaEnginePrivate::ResetOperation(0) 08:21:05 Trace: CFtpControlSocket::FileTransfer() 08:21:05 Status: Starting upload of F:\rbac db\2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:05 Trace: CFtpControlSocket::SendNextCommand() 08:21:05 Trace: CFtpControlSocket::ChangeDirSend() 08:21:05 Command: CWD /Viewpoints 08:21:05 Trace: CFtpControlSocket::OnReceive() 08:21:05 Response: 250 CWD command successful 08:21:05 Trace: CFtpControlSocket::ResetOperation(0) 08:21:05 Trace: CControlSocket::ResetOperation(0) 08:21:05 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:05 Trace: FileTransferSubcommandResult() 08:21:15 Trace: CFtpControlSocket::SendNextCommand() 08:21:15 Trace: FileTransferSend() 08:21:15 Trace: CFtpControlSocket::SendNextCommand() 08:21:15 Trace: CFtpControlSocket::TransferSend() 08:21:15 Trace: state = 1 08:21:15 Command: TYPE I 08:21:15 Trace: CFtpControlSocket::OnReceive() 08:21:15 Response: 200 Type set to I 08:21:15 Trace: CFtpControlSocket::TransferParseResponse() 08:21:15 Trace: code = 2 08:21:15 Trace: state = 1 08:21:15 Trace: CFtpControlSocket::SendNextCommand() 08:21:15 Trace: CFtpControlSocket::TransferSend() 08:21:15 Trace: state = 2 08:21:15 Command: PASV 08:21:16 Trace: CFtpControlSocket::OnReceive() 08:21:16 Response: 227 Entering Passive Mode (208,68,104,122,150,37). 08:21:16 Trace: CFtpControlSocket::TransferParseResponse() 08:21:16 Trace: code = 2 08:21:16 Trace: state = 2 08:21:16 Trace: CFtpControlSocket::SendNextCommand() 08:21:16 Trace: CFtpControlSocket::TransferSend() 08:21:16 Trace: state = 3 08:21:16 Command: REST 2147483647 08:21:16 Trace: CFtpControlSocket::OnReceive() 08:21:16 Response: 350 Restarting at 2147483647. Send STORE or RETRIEVE to initiate transfer 08:21:16 Trace: CFtpControlSocket::TransferParseResponse() 08:21:16 Trace: code = 3 08:21:16 Trace: state = 3 08:21:16 Trace: CFtpControlSocket::SendNextCommand() 08:21:16 Trace: CFtpControlSocket::TransferSend() 08:21:16 Trace: state = 4 08:21:16 Command: STOR 2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:16 Trace: CTransferSocket::OnConnect 08:21:16 Trace: First EAGAIN in CTransferSocket::OnSend() 08:21:16 Trace: CTransferSocket::OnReceive(), m_transferMode=1 08:21:16 Trace: CFtpControlSocket::OnReceive() 08:21:16 Response: 150 Opening BINARY mode data connection for 2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:16 Trace: CFtpControlSocket::TransferParseResponse() 08:21:16 Trace: code = 1 08:21:16 Trace: state = 4 08:21:16 Trace: CFtpControlSocket::SendNextCommand() 08:21:16 Trace: CFtpControlSocket::TransferSend() 08:21:16 Trace: state = 5 08:21:16 Trace: CRealControlSocket::OnClose(10053) 08:21:16 Error: Disconnected from server: ECONNABORTED - Connection aborted 08:21:16 Trace: CControlSocket::DoClose(64) 08:21:16 Trace: CFtpControlSocket::ResetOperation(66) 08:21:16 Trace: CControlSocket::ResetOperation(66) 08:21:16 Trace: CFtpControlSocket::ResetOperation(66) 08:21:16 Trace: CControlSocket::ResetOperation(66) 08:21:16 Trace: CFileZillaEnginePrivate::ResetOperation(66) 08:21:16 Trace: CControlSocket::DoClose(64) 08:21:16 Trace: CControlSocket::DoClose(64) 08:21:16 Status: Resolving address of rbac.com 08:21:16 Status: Connecting to 208.68.104.122:21... 08:21:16 Status: Connection established, waiting for welcome message... 08:21:16 Trace: CFtpControlSocket::OnReceive() 08:21:16 Response: 220 192.168.30.26 FTP server ready 08:21:16 Trace: CFtpControlSocket::SendNextCommand() 08:21:16 Command: USER rbacinc 08:21:16 Trace: CFtpControlSocket::OnReceive() 08:21:16 Response: 331 Password required for rbacinc. 08:21:16 Trace: CFtpControlSocket::SendNextCommand() 08:21:16 Command: PASS 08:21:17 Trace: CFtpControlSocket::OnReceive() 08:21:17 Response: 230 User rbacinc logged in. 08:21:17 Status: Connected 08:21:17 Trace: CFtpControlSocket::ResetOperation(0) 08:21:17 Trace: CControlSocket::ResetOperation(0) 08:21:17 Trace: CFileZillaEnginePrivate::ResetOperation(0) 08:21:17 Trace: CFtpControlSocket::FileTransfer() 08:21:17 Status: Starting upload of F:\rbac db\2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:17 Trace: CFtpControlSocket::SendNextCommand() 08:21:17 Trace: CFtpControlSocket::ChangeDirSend() 08:21:17 Command: CWD /Viewpoints 08:21:17 Trace: CFtpControlSocket::OnReceive() 08:21:17 Response: 250 CWD command successful 08:21:17 Trace: CFtpControlSocket::ResetOperation(0) 08:21:17 Trace: CControlSocket::ResetOperation(0) 08:21:17 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:17 Trace: FileTransferSubcommandResult() 08:21:17 Status: Retrieving directory listing... 08:21:17 Trace: ftpcontrolsocket.cpp(1275): List called from other command caller=0p16d1950 08:21:17 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:17 Trace: CFtpControlSocket::ListSubcommandResult() 08:21:17 Trace: state = 1 08:21:17 Trace: CFtpControlSocket::SendNextCommand() 08:21:17 Trace: CFtpControlSocket::TransferSend() 08:21:17 Trace: state = 1 08:21:17 Command: TYPE I 08:21:17 Trace: CFtpControlSocket::OnReceive() 08:21:17 Response: 200 Type set to I 08:21:17 Trace: CFtpControlSocket::TransferParseResponse() 08:21:17 Trace: code = 2 08:21:17 Trace: state = 1 08:21:17 Trace: CFtpControlSocket::SendNextCommand() 08:21:17 Trace: CFtpControlSocket::TransferSend() 08:21:17 Trace: state = 2 08:21:17 Command: PASV 08:21:17 Trace: CFtpControlSocket::OnReceive() 08:21:17 Response: 227 Entering Passive Mode (208,68,104,122,150,42). 08:21:17 Trace: CFtpControlSocket::TransferParseResponse() 08:21:17 Trace: code = 2 08:21:17 Trace: state = 2 08:21:17 Trace: CFtpControlSocket::SendNextCommand() 08:21:17 Trace: CFtpControlSocket::TransferSend() 08:21:17 Trace: state = 4 08:21:17 Command: LIST 08:21:17 Trace: CTransferSocket::OnConnect 08:21:17 Trace: CTransferSocket::OnReceive(), m_transferMode=0 08:21:17 Trace: CFtpControlSocket::OnReceive() 08:21:17 Response: 150 Opening ASCII mode data connection for file list 08:21:17 Trace: CFtpControlSocket::TransferParseResponse() 08:21:17 Trace: code = 1 08:21:17 Trace: state = 4 08:21:17 Trace: CFtpControlSocket::SendNextCommand() 08:21:17 Trace: CFtpControlSocket::TransferSend() 08:21:17 Trace: state = 5 08:21:17 Trace: CTransferSocket::OnReceive(), m_transferMode=0 08:21:17 Trace: CTransferSocket::TransferEnd(1) 08:21:17 Trace: CFtpControlSocket::TransferEnd() 08:21:17 Trace: CFtpControlSocket::OnReceive() 08:21:17 Response: 226 Transfer complete. 08:21:17 Trace: CFtpControlSocket::TransferParseResponse() 08:21:17 Trace: code = 2 08:21:17 Trace: state = 7 08:21:17 Trace: CFtpControlSocket::ResetOperation(0) 08:21:17 Trace: CControlSocket::ResetOperation(0) 08:21:17 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:17 Trace: CFtpControlSocket::ListSubcommandResult() 08:21:17 Trace: state = 3 08:21:17 Trace: CFtpControlSocket::ResetOperation(0) 08:21:17 Trace: CControlSocket::ResetOperation(0) 08:21:17 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:17 Trace: FileTransferSubcommandResult() 08:21:17 Trace: CFtpControlSocket::SendNextCommand() 08:21:17 Trace: FileTransferSend() 08:21:17 Trace: CFtpControlSocket::SendNextCommand() 08:21:17 Trace: CFtpControlSocket::TransferSend() 08:21:17 Trace: state = 2 08:21:17 Command: PASV 08:21:18 Trace: CFtpControlSocket::OnReceive() 08:21:18 Response: 227 Entering Passive Mode (208,68,104,122,150,43). 08:21:18 Trace: CFtpControlSocket::TransferParseResponse() 08:21:18 Trace: code = 2 08:21:18 Trace: state = 2 08:21:18 Trace: CFtpControlSocket::SendNextCommand() 08:21:18 Trace: CFtpControlSocket::TransferSend() 08:21:18 Trace: state = 3 08:21:18 Command: REST 2147483647 08:21:18 Trace: CFtpControlSocket::OnReceive() 08:21:18 Response: 350 Restarting at 2147483647. Send STORE or RETRIEVE to initiate transfer 08:21:18 Trace: CFtpControlSocket::TransferParseResponse() 08:21:18 Trace: code = 3 08:21:18 Trace: state = 3 08:21:18 Trace: CFtpControlSocket::SendNextCommand() 08:21:18 Trace: CFtpControlSocket::TransferSend() 08:21:18 Trace: state = 4 08:21:18 Command: STOR 2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:18 Trace: CTransferSocket::OnConnect 08:21:18 Trace: First EAGAIN in CTransferSocket::OnSend() 08:21:18 Trace: CTransferSocket::OnReceive(), m_transferMode=1 08:21:18 Trace: CFtpControlSocket::OnReceive() 08:21:18 Response: 150 Opening BINARY mode data connection for 2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:18 Trace: CFtpControlSocket::TransferParseResponse() 08:21:18 Trace: code = 1 08:21:18 Trace: state = 4 08:21:18 Trace: CFtpControlSocket::SendNextCommand() 08:21:18 Trace: CFtpControlSocket::TransferSend() 08:21:18 Trace: state = 5 08:21:18 Trace: CRealControlSocket::OnClose(10053) 08:21:18 Error: Disconnected from server: ECONNABORTED - Connection aborted 08:21:18 Trace: CControlSocket::DoClose(64) 08:21:18 Trace: CFtpControlSocket::ResetOperation(66) 08:21:18 Trace: CControlSocket::ResetOperation(66) 08:21:18 Trace: CFtpControlSocket::ResetOperation(66) 08:21:18 Trace: CControlSocket::ResetOperation(66) 08:21:18 Trace: CFileZillaEnginePrivate::ResetOperation(66) 08:21:18 Trace: CControlSocket::DoClose(64) 08:21:18 Trace: CControlSocket::DoClose(64) 08:21:18 Status: Resolving address of rbac.com 08:21:18 Status: Connecting to 208.68.104.122:21... 08:21:18 Status: Connection established, waiting for welcome message... 08:21:18 Trace: CFtpControlSocket::OnReceive() 08:21:18 Response: 220 192.168.30.26 FTP server ready 08:21:18 Trace: CFtpControlSocket::SendNextCommand() 08:21:18 Command: USER rbacinc 08:21:18 Trace: CFtpControlSocket::OnReceive() 08:21:18 Response: 331 Password required for rbacinc. 08:21:18 Trace: CFtpControlSocket::SendNextCommand() 08:21:18 Command: PASS 08:21:18 Trace: CFtpControlSocket::OnReceive() 08:21:18 Response: 230 User rbacinc logged in. 08:21:18 Status: Connected 08:21:18 Trace: CFtpControlSocket::ResetOperation(0) 08:21:18 Trace: CControlSocket::ResetOperation(0) 08:21:18 Trace: CFileZillaEnginePrivate::ResetOperation(0) 08:21:18 Trace: CFtpControlSocket::FileTransfer() 08:21:18 Status: Starting upload of F:\rbac db\2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:18 Trace: CFtpControlSocket::SendNextCommand() 08:21:18 Trace: CFtpControlSocket::ChangeDirSend() 08:21:18 Command: CWD /Viewpoints 08:21:19 Trace: CFtpControlSocket::OnReceive() 08:21:19 Response: 250 CWD command successful 08:21:19 Trace: CFtpControlSocket::ResetOperation(0) 08:21:19 Trace: CControlSocket::ResetOperation(0) 08:21:19 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:19 Trace: FileTransferSubcommandResult() 08:21:19 Status: Retrieving directory listing... 08:21:19 Trace: ftpcontrolsocket.cpp(1275): List called from other command caller=0p16d1950 08:21:19 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:19 Trace: CFtpControlSocket::ListSubcommandResult() 08:21:19 Trace: state = 1 08:21:19 Trace: CFtpControlSocket::SendNextCommand() 08:21:19 Trace: CFtpControlSocket::TransferSend() 08:21:19 Trace: state = 1 08:21:19 Command: TYPE I 08:21:19 Trace: CFtpControlSocket::OnReceive() 08:21:19 Response: 200 Type set to I 08:21:19 Trace: CFtpControlSocket::TransferParseResponse() 08:21:19 Trace: code = 2 08:21:19 Trace: state = 1 08:21:19 Trace: CFtpControlSocket::SendNextCommand() 08:21:19 Trace: CFtpControlSocket::TransferSend() 08:21:19 Trace: state = 2 08:21:19 Command: PASV 08:21:19 Trace: CFtpControlSocket::OnReceive() 08:21:19 Response: 227 Entering Passive Mode (208,68,104,122,150,46). 08:21:19 Trace: CFtpControlSocket::TransferParseResponse() 08:21:19 Trace: code = 2 08:21:19 Trace: state = 2 08:21:19 Trace: CFtpControlSocket::SendNextCommand() 08:21:19 Trace: CFtpControlSocket::TransferSend() 08:21:19 Trace: state = 4 08:21:19 Command: LIST 08:21:19 Trace: CTransferSocket::OnConnect 08:21:19 Trace: CTransferSocket::OnReceive(), m_transferMode=0 08:21:19 Trace: CFtpControlSocket::OnReceive() 08:21:19 Response: 150 Opening ASCII mode data connection for file list 08:21:19 Trace: CFtpControlSocket::TransferParseResponse() 08:21:19 Trace: code = 1 08:21:19 Trace: state = 4 08:21:19 Trace: CFtpControlSocket::SendNextCommand() 08:21:19 Trace: CFtpControlSocket::TransferSend() 08:21:19 Trace: state = 5 08:21:19 Trace: CTransferSocket::OnReceive(), m_transferMode=0 08:21:19 Trace: CTransferSocket::TransferEnd(1) 08:21:19 Trace: CFtpControlSocket::TransferEnd() 08:21:19 Trace: CFtpControlSocket::OnReceive() 08:21:19 Response: 226 Transfer complete. 08:21:19 Trace: CFtpControlSocket::TransferParseResponse() 08:21:19 Trace: code = 2 08:21:19 Trace: state = 7 08:21:19 Trace: CFtpControlSocket::ResetOperation(0) 08:21:19 Trace: CControlSocket::ResetOperation(0) 08:21:19 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:19 Trace: CFtpControlSocket::ListSubcommandResult() 08:21:19 Trace: state = 3 08:21:19 Trace: CFtpControlSocket::ResetOperation(0) 08:21:19 Trace: CControlSocket::ResetOperation(0) 08:21:19 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:19 Trace: FileTransferSubcommandResult() 08:21:31 Trace: CFtpControlSocket::SendNextCommand() 08:21:31 Trace: FileTransferSend() 08:21:31 Trace: CFtpControlSocket::SendNextCommand() 08:21:31 Trace: CFtpControlSocket::TransferSend() 08:21:31 Trace: state = 2 08:21:31 Command: PASV 08:21:31 Trace: CFtpControlSocket::OnReceive() 08:21:31 Response: 227 Entering Passive Mode (208,68,104,122,150,86). 08:21:31 Trace: CFtpControlSocket::TransferParseResponse() 08:21:31 Trace: code = 2 08:21:31 Trace: state = 2 08:21:31 Trace: CFtpControlSocket::SendNextCommand() 08:21:31 Trace: CFtpControlSocket::TransferSend() 08:21:31 Trace: state = 3 08:21:31 Command: REST 2147483647 08:21:31 Trace: CFtpControlSocket::OnReceive() 08:21:31 Response: 350 Restarting at 2147483647. Send STORE or RETRIEVE to initiate transfer 08:21:31 Trace: CFtpControlSocket::TransferParseResponse() 08:21:31 Trace: code = 3 08:21:31 Trace: state = 3 08:21:31 Trace: CFtpControlSocket::SendNextCommand() 08:21:31 Trace: CFtpControlSocket::TransferSend() 08:21:31 Trace: state = 4 08:21:31 Command: STOR 2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:32 Trace: CTransferSocket::OnConnect 08:21:32 Trace: First EAGAIN in CTransferSocket::OnSend() 08:21:32 Trace: CTransferSocket::OnReceive(), m_transferMode=1 08:21:32 Trace: CFtpControlSocket::OnReceive() 08:21:32 Response: 150 Opening BINARY mode data connection for 2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:32 Trace: CFtpControlSocket::TransferParseResponse() 08:21:32 Trace: code = 1 08:21:32 Trace: state = 4 08:21:32 Trace: CFtpControlSocket::SendNextCommand() 08:21:32 Trace: CFtpControlSocket::TransferSend() 08:21:32 Trace: state = 5 08:21:32 Trace: CRealControlSocket::OnClose(10053) 08:21:32 Error: Disconnected from server: ECONNABORTED - Connection aborted 08:21:32 Trace: CControlSocket::DoClose(64) 08:21:32 Trace: CFtpControlSocket::ResetOperation(66) 08:21:32 Trace: CControlSocket::ResetOperation(66) 08:21:32 Trace: CFtpControlSocket::ResetOperation(66) 08:21:32 Trace: CControlSocket::ResetOperation(66) 08:21:32 Trace: CFileZillaEnginePrivate::ResetOperation(66) 08:21:32 Trace: CControlSocket::DoClose(64) 08:21:32 Trace: CControlSocket::DoClose(64) 08:21:32 Status: Resolving address of rbac.com 08:21:32 Status: Connecting to 208.68.104.122:21... 08:21:32 Status: Connection established, waiting for welcome message... 08:21:32 Trace: CFtpControlSocket::OnReceive() 08:21:32 Response: 220 192.168.30.26 FTP server ready 08:21:32 Trace: CFtpControlSocket::SendNextCommand() 08:21:32 Command: USER rbacinc 08:21:32 Trace: CFtpControlSocket::OnReceive() 08:21:32 Response: 331 Password required for rbacinc. 08:21:32 Trace: CFtpControlSocket::SendNextCommand() 08:21:32 Command: PASS 08:21:32 Trace: CFtpControlSocket::OnReceive() 08:21:32 Response: 230 User rbacinc logged in. 08:21:32 Status: Connected 08:21:32 Trace: CFtpControlSocket::ResetOperation(0) 08:21:32 Trace: CControlSocket::ResetOperation(0) 08:21:32 Trace: CFileZillaEnginePrivate::ResetOperation(0) 08:21:32 Trace: CFtpControlSocket::FileTransfer() 08:21:32 Status: Starting upload of F:\rbac db\2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:32 Trace: CFtpControlSocket::SendNextCommand() 08:21:32 Trace: CFtpControlSocket::ChangeDirSend() 08:21:32 Command: CWD /Viewpoints 08:21:32 Trace: CFtpControlSocket::OnReceive() 08:21:32 Response: 250 CWD command successful 08:21:32 Trace: CFtpControlSocket::ResetOperation(0) 08:21:32 Trace: CControlSocket::ResetOperation(0) 08:21:32 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:32 Trace: FileTransferSubcommandResult() 08:21:32 Status: Retrieving directory listing... 08:21:32 Trace: ftpcontrolsocket.cpp(1275): List called from other command caller=0p16d1950 08:21:32 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:32 Trace: CFtpControlSocket::ListSubcommandResult() 08:21:32 Trace: state = 1 08:21:32 Trace: CFtpControlSocket::SendNextCommand() 08:21:32 Trace: CFtpControlSocket::TransferSend() 08:21:32 Trace: state = 1 08:21:32 Command: TYPE I 08:21:33 Trace: CFtpControlSocket::OnReceive() 08:21:33 Response: 200 Type set to I 08:21:33 Trace: CFtpControlSocket::TransferParseResponse() 08:21:33 Trace: code = 2 08:21:33 Trace: state = 1 08:21:33 Trace: CFtpControlSocket::SendNextCommand() 08:21:33 Trace: CFtpControlSocket::TransferSend() 08:21:33 Trace: state = 2 08:21:33 Command: PASV 08:21:33 Trace: CFtpControlSocket::OnReceive() 08:21:33 Response: 227 Entering Passive Mode (208,68,104,122,150,89). 08:21:33 Trace: CFtpControlSocket::TransferParseResponse() 08:21:33 Trace: code = 2 08:21:33 Trace: state = 2 08:21:33 Trace: CFtpControlSocket::SendNextCommand() 08:21:33 Trace: CFtpControlSocket::TransferSend() 08:21:33 Trace: state = 4 08:21:33 Command: LIST 08:21:33 Trace: CTransferSocket::OnConnect 08:21:33 Trace: CTransferSocket::OnReceive(), m_transferMode=0 08:21:33 Trace: CFtpControlSocket::OnReceive() 08:21:33 Response: 150 Opening ASCII mode data connection for file list 08:21:33 Trace: CFtpControlSocket::TransferParseResponse() 08:21:33 Trace: code = 1 08:21:33 Trace: state = 4 08:21:33 Trace: CFtpControlSocket::SendNextCommand() 08:21:33 Trace: CFtpControlSocket::TransferSend() 08:21:33 Trace: state = 5 08:21:33 Trace: CTransferSocket::OnReceive(), m_transferMode=0 08:21:33 Trace: CTransferSocket::TransferEnd(1) 08:21:33 Trace: CFtpControlSocket::TransferEnd() 08:21:33 Trace: CFtpControlSocket::OnReceive() 08:21:33 Response: 226 Transfer complete. 08:21:33 Trace: CFtpControlSocket::TransferParseResponse() 08:21:33 Trace: code = 2 08:21:33 Trace: state = 7 08:21:33 Trace: CFtpControlSocket::ResetOperation(0) 08:21:33 Trace: CControlSocket::ResetOperation(0) 08:21:33 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:33 Trace: CFtpControlSocket::ListSubcommandResult() 08:21:33 Trace: state = 3 08:21:33 Trace: CFtpControlSocket::ResetOperation(0) 08:21:33 Trace: CControlSocket::ResetOperation(0) 08:21:33 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:33 Trace: FileTransferSubcommandResult() 08:21:33 Trace: CFtpControlSocket::SendNextCommand() 08:21:33 Trace: FileTransferSend() 08:21:33 Trace: CFtpControlSocket::SendNextCommand() 08:21:33 Trace: CFtpControlSocket::TransferSend() 08:21:33 Trace: state = 2 08:21:33 Command: PASV 08:21:33 Trace: CFtpControlSocket::OnReceive() 08:21:33 Response: 227 Entering Passive Mode (208,68,104,122,150,91). 08:21:33 Trace: CFtpControlSocket::TransferParseResponse() 08:21:33 Trace: code = 2 08:21:33 Trace: state = 2 08:21:33 Trace: CFtpControlSocket::SendNextCommand() 08:21:33 Trace: CFtpControlSocket::TransferSend() 08:21:33 Trace: state = 3 08:21:33 Command: REST 2147483647 08:21:33 Trace: CFtpControlSocket::OnReceive() 08:21:33 Response: 350 Restarting at 2147483647. Send STORE or RETRIEVE to initiate transfer 08:21:33 Trace: CFtpControlSocket::TransferParseResponse() 08:21:33 Trace: code = 3 08:21:33 Trace: state = 3 08:21:33 Trace: CFtpControlSocket::SendNextCommand() 08:21:33 Trace: CFtpControlSocket::TransferSend() 08:21:33 Trace: state = 4 08:21:33 Command: STOR 2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:33 Trace: CTransferSocket::OnConnect 08:21:33 Trace: First EAGAIN in CTransferSocket::OnSend() 08:21:33 Trace: CTransferSocket::OnReceive(), m_transferMode=1 08:21:34 Trace: CFtpControlSocket::OnReceive() 08:21:34 Response: 150 Opening BINARY mode data connection for 2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:34 Trace: CFtpControlSocket::TransferParseResponse() 08:21:34 Trace: code = 1 08:21:34 Trace: state = 4 08:21:34 Trace: CFtpControlSocket::SendNextCommand() 08:21:34 Trace: CFtpControlSocket::TransferSend() 08:21:34 Trace: state = 5 08:21:34 Trace: CRealControlSocket::OnClose(10053) 08:21:34 Error: Disconnected from server: ECONNABORTED - Connection aborted 08:21:34 Trace: CControlSocket::DoClose(64) 08:21:34 Trace: CFtpControlSocket::ResetOperation(66) 08:21:34 Trace: CControlSocket::ResetOperation(66) 08:21:34 Trace: CFtpControlSocket::ResetOperation(66) 08:21:34 Trace: CControlSocket::ResetOperation(66) 08:21:34 Trace: CFileZillaEnginePrivate::ResetOperation(66) 08:21:34 Trace: CControlSocket::DoClose(64) 08:21:34 Trace: CControlSocket::DoClose(64) 08:21:34 Status: Resolving address of rbac.com 08:21:34 Status: Connecting to 208.68.104.122:21... 08:21:34 Status: Connection established, waiting for welcome message... 08:21:34 Trace: CFtpControlSocket::OnReceive() 08:21:34 Response: 220 192.168.30.26 FTP server ready 08:21:34 Trace: CFtpControlSocket::SendNextCommand() 08:21:34 Command: USER rbacinc 08:21:34 Trace: CFtpControlSocket::OnReceive() 08:21:34 Response: 331 Password required for rbacinc. 08:21:34 Trace: CFtpControlSocket::SendNextCommand() 08:21:34 Command: PASS 08:21:34 Trace: CFtpControlSocket::OnReceive() 08:21:34 Response: 230 User rbacinc logged in. 08:21:34 Status: Connected 08:21:34 Trace: CFtpControlSocket::ResetOperation(0) 08:21:34 Trace: CControlSocket::ResetOperation(0) 08:21:34 Trace: CFileZillaEnginePrivate::ResetOperation(0) 08:21:34 Trace: CFtpControlSocket::FileTransfer() 08:21:34 Status: Starting upload of F:\rbac db\2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:34 Trace: CFtpControlSocket::SendNextCommand() 08:21:34 Trace: CFtpControlSocket::ChangeDirSend() 08:21:34 Command: CWD /Viewpoints 08:21:34 Trace: CFtpControlSocket::OnReceive() 08:21:34 Response: 250 CWD command successful 08:21:34 Trace: CFtpControlSocket::ResetOperation(0) 08:21:34 Trace: CControlSocket::ResetOperation(0) 08:21:34 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:34 Trace: FileTransferSubcommandResult() 08:21:34 Status: Retrieving directory listing... 08:21:34 Trace: ftpcontrolsocket.cpp(1275): List called from other command caller=0p16d1950 08:21:34 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:34 Trace: CFtpControlSocket::ListSubcommandResult() 08:21:34 Trace: state = 1 08:21:34 Trace: CFtpControlSocket::SendNextCommand() 08:21:34 Trace: CFtpControlSocket::TransferSend() 08:21:34 Trace: state = 1 08:21:34 Command: TYPE I 08:21:35 Trace: CFtpControlSocket::OnReceive() 08:21:35 Response: 200 Type set to I 08:21:35 Trace: CFtpControlSocket::TransferParseResponse() 08:21:35 Trace: code = 2 08:21:35 Trace: state = 1 08:21:35 Trace: CFtpControlSocket::SendNextCommand() 08:21:35 Trace: CFtpControlSocket::TransferSend() 08:21:35 Trace: state = 2 08:21:35 Command: PASV 08:21:35 Trace: CFtpControlSocket::OnReceive() 08:21:35 Response: 227 Entering Passive Mode (208,68,104,122,150,101). 08:21:35 Trace: CFtpControlSocket::TransferParseResponse() 08:21:35 Trace: code = 2 08:21:35 Trace: state = 2 08:21:35 Trace: CFtpControlSocket::SendNextCommand() 08:21:35 Trace: CFtpControlSocket::TransferSend() 08:21:35 Trace: state = 4 08:21:35 Command: LIST 08:21:35 Trace: CTransferSocket::OnConnect 08:21:35 Trace: CTransferSocket::OnReceive(), m_transferMode=0 08:21:35 Trace: CFtpControlSocket::OnReceive() 08:21:35 Response: 150 Opening ASCII mode data connection for file list 08:21:35 Trace: CFtpControlSocket::TransferParseResponse() 08:21:35 Trace: code = 1 08:21:35 Trace: state = 4 08:21:35 Trace: CFtpControlSocket::SendNextCommand() 08:21:35 Trace: CFtpControlSocket::TransferSend() 08:21:35 Trace: state = 5 08:21:35 Trace: CTransferSocket::OnReceive(), m_transferMode=0 08:21:35 Trace: CTransferSocket::TransferEnd(1) 08:21:35 Trace: CFtpControlSocket::TransferEnd() 08:21:35 Trace: CFtpControlSocket::OnReceive() 08:21:35 Response: 226 Transfer complete. 08:21:35 Trace: CFtpControlSocket::TransferParseResponse() 08:21:35 Trace: code = 2 08:21:35 Trace: state = 7 08:21:35 Trace: CFtpControlSocket::ResetOperation(0) 08:21:35 Trace: CControlSocket::ResetOperation(0) 08:21:35 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:35 Trace: CFtpControlSocket::ListSubcommandResult() 08:21:35 Trace: state = 3 08:21:35 Trace: CFtpControlSocket::ResetOperation(0) 08:21:35 Trace: CControlSocket::ResetOperation(0) 08:21:35 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:35 Trace: FileTransferSubcommandResult() 08:21:35 Trace: CFtpControlSocket::SendNextCommand() 08:21:35 Trace: FileTransferSend() 08:21:35 Trace: CFtpControlSocket::SendNextCommand() 08:21:35 Trace: CFtpControlSocket::TransferSend() 08:21:35 Trace: state = 2 08:21:35 Command: PASV 08:21:35 Trace: CFtpControlSocket::OnReceive() 08:21:35 Response: 227 Entering Passive Mode (208,68,104,122,150,102). 08:21:35 Trace: CFtpControlSocket::TransferParseResponse() 08:21:35 Trace: code = 2 08:21:35 Trace: state = 2 08:21:35 Trace: CFtpControlSocket::SendNextCommand() 08:21:35 Trace: CFtpControlSocket::TransferSend() 08:21:35 Trace: state = 3 08:21:35 Command: REST 2147483647 08:21:35 Trace: CFtpControlSocket::OnReceive() 08:21:35 Response: 350 Restarting at 2147483647. Send STORE or RETRIEVE to initiate transfer 08:21:35 Trace: CFtpControlSocket::TransferParseResponse() 08:21:35 Trace: code = 3 08:21:35 Trace: state = 3 08:21:35 Trace: CFtpControlSocket::SendNextCommand() 08:21:35 Trace: CFtpControlSocket::TransferSend() 08:21:35 Trace: state = 4 08:21:35 Command: STOR 2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:36 Trace: CTransferSocket::OnConnect 08:21:36 Trace: First EAGAIN in CTransferSocket::OnSend() 08:21:36 Trace: CTransferSocket::OnReceive(), m_transferMode=1 08:21:36 Trace: CFtpControlSocket::OnReceive() 08:21:36 Response: 150 Opening BINARY mode data connection for 2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:36 Trace: CFtpControlSocket::TransferParseResponse() 08:21:36 Trace: code = 1 08:21:36 Trace: state = 4 08:21:36 Trace: CFtpControlSocket::SendNextCommand() 08:21:36 Trace: CFtpControlSocket::TransferSend() 08:21:36 Trace: state = 5 08:21:36 Trace: CRealControlSocket::OnClose(10053) 08:21:36 Error: Disconnected from server: ECONNABORTED - Connection aborted 08:21:36 Trace: CControlSocket::DoClose(64) 08:21:36 Trace: CFtpControlSocket::ResetOperation(66) 08:21:36 Trace: CControlSocket::ResetOperation(66) 08:21:36 Trace: CFtpControlSocket::ResetOperation(66) 08:21:36 Trace: CControlSocket::ResetOperation(66) 08:21:36 Trace: CFileZillaEnginePrivate::ResetOperation(66) 08:21:36 Trace: CControlSocket::DoClose(64) 08:21:36 Trace: CControlSocket::DoClose(64) 08:21:36 Status: Resolving address of rbac.com 08:21:36 Status: Connecting to 208.68.104.122:21... 08:21:36 Status: Connection established, waiting for welcome message... 08:21:36 Trace: CFtpControlSocket::OnReceive() 08:21:36 Response: 220 192.168.30.26 FTP server ready 08:21:36 Trace: CFtpControlSocket::SendNextCommand() 08:21:36 Command: USER rbacinc 08:21:36 Trace: CFtpControlSocket::OnReceive() 08:21:36 Response: 331 Password required for rbacinc. 08:21:36 Trace: CFtpControlSocket::SendNextCommand() 08:21:36 Command: PASS 08:21:36 Trace: CFtpControlSocket::OnReceive() 08:21:36 Response: 230 User rbacinc logged in. 08:21:36 Status: Connected 08:21:36 Trace: CFtpControlSocket::ResetOperation(0) 08:21:36 Trace: CControlSocket::ResetOperation(0) 08:21:36 Trace: CFileZillaEnginePrivate::ResetOperation(0) 08:21:36 Trace: CFtpControlSocket::FileTransfer() 08:21:36 Status: Starting upload of F:\rbac db\2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:36 Trace: CFtpControlSocket::SendNextCommand() 08:21:36 Trace: CFtpControlSocket::ChangeDirSend() 08:21:36 Command: CWD /Viewpoints 08:21:36 Trace: CFtpControlSocket::OnReceive() 08:21:36 Response: 250 CWD command successful 08:21:36 Trace: CFtpControlSocket::ResetOperation(0) 08:21:36 Trace: CControlSocket::ResetOperation(0) 08:21:36 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:36 Trace: FileTransferSubcommandResult() 08:21:36 Status: Retrieving directory listing... 08:21:36 Trace: ftpcontrolsocket.cpp(1275): List called from other command caller=0p16d1950 08:21:36 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:36 Trace: CFtpControlSocket::ListSubcommandResult() 08:21:36 Trace: state = 1 08:21:36 Trace: CFtpControlSocket::SendNextCommand() 08:21:36 Trace: CFtpControlSocket::TransferSend() 08:21:36 Trace: state = 1 08:21:36 Command: TYPE I 08:21:37 Trace: CFtpControlSocket::OnReceive() 08:21:37 Response: 200 Type set to I 08:21:37 Trace: CFtpControlSocket::TransferParseResponse() 08:21:37 Trace: code = 2 08:21:37 Trace: state = 1 08:21:37 Trace: CFtpControlSocket::SendNextCommand() 08:21:37 Trace: CFtpControlSocket::TransferSend() 08:21:37 Trace: state = 2 08:21:37 Command: PASV 08:21:37 Trace: CFtpControlSocket::OnReceive() 08:21:37 Response: 227 Entering Passive Mode (208,68,104,122,150,105). 08:21:37 Trace: CFtpControlSocket::TransferParseResponse() 08:21:37 Trace: code = 2 08:21:37 Trace: state = 2 08:21:37 Trace: CFtpControlSocket::SendNextCommand() 08:21:37 Trace: CFtpControlSocket::TransferSend() 08:21:37 Trace: state = 4 08:21:37 Command: LIST 08:21:37 Trace: CTransferSocket::OnConnect 08:21:37 Trace: CTransferSocket::OnReceive(), m_transferMode=0 08:21:37 Trace: CFtpControlSocket::OnReceive() 08:21:37 Response: 150 Opening ASCII mode data connection for file list 08:21:37 Trace: CFtpControlSocket::TransferParseResponse() 08:21:37 Trace: code = 1 08:21:37 Trace: state = 4 08:21:37 Trace: CFtpControlSocket::SendNextCommand() 08:21:37 Trace: CFtpControlSocket::TransferSend() 08:21:37 Trace: state = 5 08:21:37 Trace: CTransferSocket::OnReceive(), m_transferMode=0 08:21:37 Trace: CTransferSocket::TransferEnd(1) 08:21:37 Trace: CFtpControlSocket::TransferEnd() 08:21:37 Trace: CFtpControlSocket::OnReceive() 08:21:37 Response: 226 Transfer complete. 08:21:37 Trace: CFtpControlSocket::TransferParseResponse() 08:21:37 Trace: code = 2 08:21:37 Trace: state = 7 08:21:37 Trace: CFtpControlSocket::ResetOperation(0) 08:21:37 Trace: CControlSocket::ResetOperation(0) 08:21:37 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:37 Trace: CFtpControlSocket::ListSubcommandResult() 08:21:37 Trace: state = 3 08:21:37 Trace: CFtpControlSocket::ResetOperation(0) 08:21:37 Trace: CControlSocket::ResetOperation(0) 08:21:37 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:37 Trace: FileTransferSubcommandResult() 08:21:40 Status: Skipping upload of F:\rbac db\2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:40 Trace: CFtpControlSocket::ResetOperation(0) 08:21:40 Trace: CControlSocket::ResetOperation(0) 08:21:40 Status: File transfer successful 08:21:40 Trace: CFileZillaEnginePrivate::ResetOperation(0) 08:21:40 Trace: CFileZillaEnginePrivate::ResetOperation(0) 08:22:40 Status: Disconnected from server 08:22:40 Trace: CControlSocket::DoClose(64) 08:22:40 Trace: CFtpControlSocket::ResetOperation(66) 08:22:40 Trace: CControlSocket::ResetOperation(66) 08:22:40 Trace: CFileZillaEnginePrivate::ResetOperation(66) 08:22:40 Trace: CControlSocket::DoClose(64) 08:22:40 Trace: CControlSocket::DoClose(64) 08:22:40 Trace: CFileZillaEnginePrivate::ResetOperation(0)