Custom Query (10423 matches)

Hi It was impossible to use FileZilla Client behind a Microsoft Firewall (TMG, Threat Management Gateway, successor of ISA Firewall) with default FTP settings.

They allow only specific "Read" FTP commands and filter the others. So "MSLD" ("List Directory") produced "550 Access denied". A FTP session was not possible.

Interestingly "FtpExplorer" could list the directory but failed later by creating a directory on the remote server.

Here is a link to a MS blog describing exactly the problem I had and with a list of commands they block/allow. ​http://blogs.technet.com/b/isablog/archive/2013/03/05/access-to-remote-ftp-server-through-tmg-2010-may-fail-with-error-550-access-denied.aspx

Would be very cool if FileZilla could use the "right" commands as client so it just works without the need to convince a paranoid admin to change the TMG settings "Hey, these settings are ok, they are from MS, you know! And what shi OpenSource you dare to use!!!". You perhaps know the tone...Well, perhaps the Microsoft settings are f*&% up. This may be the case.

Would be great if it is possible to change Filezilla commands.

At last: Thanks a lot for FileZilla. best regards Ben

In a filter, I specified: to be excluded if it "contains" a "~".

I have several DIRECTORIES named ".../UBS~/..." or ".../~Stuff/..." which the filter is not excluding. I also tried "begins with" and "ends with", but neither of those seem to work either.

In CentOS if filezilla is minimize or not active and queue completes its show small notification on top right corner of screen.

It helps if we working on somthing still files upload or doing some operation

How In win 7 we will get this feature?

(In Magento after every update in code we need to delete files from cache directories. so we need to check again and again in filezilla to check status. This feature helps so many developer to use this time in productive work)

Thanks and regards,

Sandesh

I am using Filezilla for sending some files from my pc to MVS system. My pc file is bigger than my mvs file and I am using SITE TRUNCATE command for truncating rows. But this command is not working with filezilla.

You can find log below.

14:07:30 Komut: SITE TRUNCATE 14:07:30 Yanıt: 200 SITE command was accepted 14:07:47 Durum: tsta için adres çözümleniyor 14:07:47 Durum: 10.24.64.1:21 bağlantısı kuruluyor... 14:07:47 Durum: Bağlandı, hoşgeldin iletisi bekleniyor... 14:07:47 Yanıt: 220-FTPD1 IBM FTP CS V1R13 at test.FW.GARANTI.COM.TR, 14:07:45 on 2013-08-06. 14:07:47 Yanıt: 220 Connection will close if idle for more than 5 minutes. 14:07:47 Komut: AUTH TLS 14:07:47 Yanıt: 234 Security environment established - ready for negotiation 14:07:47 Durum: TLS başlatılıyor... 14:07:47 Durum: Sertifika onaylanıyor... 14:07:47 Komut: USER noc1 14:07:47 Durum: TLS/SSL bağlantısı sağlandı. 14:07:47 Yanıt: 331 Send password please. 14:07:47 Komut: PASS * 14:07:47 Yanıt: 230 NOC1 is logged on. Working directory is "NOC1.". 14:07:47 Komut: OPTS UTF8 ON 14:07:47 Yanıt: 501 command OPTS aborted -- no options supported for UTF8 14:07:47 Komut: PBSZ 0 14:07:47 Yanıt: 200 Protection buffer size accepted 14:07:47 Komut: PROT P 14:07:47 Yanıt: 200 Data connection protection set to private 14:07:47 Durum: Bağlandı 14:07:47 Durum: C:\ftptest\CASS_TR_EFTFileFX_20130802.TXT karşıya yüklemesi başlıyor 14:07:47 Komut: CWD 'NOC1.PGAR.DNTMP.WRK.' 14:07:47 Yanıt: 250 "NOC1.PGAR.DNTMP.WRK." is the working directory name prefix. 14:07:47 Komut: PWD 14:07:47 Yanıt: 257 "'NOC1.PGAR.DNTMP.WRK.'" is working directory. 14:07:47 Durum: Klasör listesi alınıyor... 14:07:47 Komut: TYPE I 14:07:47 Yanıt: 200 Representation type is Image 14:07:47 Komut: PASV 14:07:47 Yanıt: 227 Entering Passive Mode (10,24,64,1,253,85) 14:07:47 Komut: LIST 14:07:47 Yanıt: 125 List started OK 14:07:47 Yanıt: 250 List completed successfully. 14:07:49 Komut: TYPE A 14:07:49 Yanıt: 200 Representation type is Ascii NonPrint 14:07:49 Komut: PASV 14:07:49 Yanıt: 227 Entering Passive Mode (10,24,64,1,250,221) 14:07:49 Komut: STOR INP4123 14:07:49 Yanıt: 125 Storing data set NOC1.PGAR.DNTMP.WRK.INP4123 14:07:49 Yanıt: 451-File transfer failed. File contains records that are longer than the LRECL of the new file. 14:07:49 Yanıt: 451 Transfer aborted due to file error. 14:07:49 Hata: Dosya aktarılamadı

Upgraded from 3.7.1 to 3.7.2. Installed. Main and welcome screen appeared. Clicked on "Quickconnect" drop down arrow and selected (already existing) account and Filezilla crashes.

An attempt to restart Filezilla displays the message "Could not find the resource files for FileZilla, closing FileZilla. / You can set the data directory of FileZilla using the '--datadir <custompath>' commandline option or by setting the FZ_DATADIR environment variable."

Downgraded to 3.7.1 which works for me without problem.

I upgraded my OS to Windows 7. Ever since then the message log window in my Filezilla client is in this extremely small font. It is not like this in any other application so changing the font size in Windows will change applications which are displaying correctly. My version of Filezilla is 3.7.3. I have attached a picture of the Filezilla as well as the clipboard of the message log.

When running the firewall and router configuiration wizard the final step "opening connection" fails and settings are not saved.

Connecting to probe.filezilla-project.org Response: 220 FZ router and firewall tester ready USER FileZilla Response: 331 Give any password. PASS 3.7.3 Response: 230 logged on. Checking for correct external IP address IP XXXXXXXXXXXXX id-bae-bce-cbh Response: 200 OK PREP 56214 Response: 200 Using port 56214, data token 1650060435 PORT XXXXXXXXXXXXXXXX Response: 200 PORT command successful LIST Response: 150 opening data connection Response: 503 Failure of data connection. Server sent unexpected reply. Connection closed

I have no direct connection to the Internet and I`m using "Generic proxy". Check for program updates hangs when connecting through a proxy server eg TinyProxy on starting TLS connection(Why TLS?).

Please add "Resume download" item to context menu on files and folders under the "Download" item, because its very often daily operation resume download very big log files with out many unneeded clicks and wasted time for wait directory scans with many files.

Please add "Bypass proxy" on/off button on the toolbar to quickly switch enable/disable generic proxy to ftp connections without waste time for open settings dialog every time foreach host.

Setup-desciption:

Internet= [Cisco WLan-distribution-system (EAP)] =WLAN= [Win7-GW-PC] =LAN= [Internal-LAN; Work-PC(Win7)]...

Appartmenthouse-Installation with Cisco-Routers, authentication: Enterprise-AES-EAP

The Win7-GW-PC connects to the Cisco-Router through WLAN and is configured to share the internet-connection of the WLAN-interface through a second (LAN-) interface to the internal LAN

A PC connected to this LAN can do everything, even DL via Firefox-Browser like: "​ftp://userid:pw@filezilla-server-address.net"

No connection can be established to the same filezilla-server using the filezilla-client. It stalls at the "211-Features" response:

..... ..... ..... Trace: CFtpControlSocket::SendNextCommand() Command: FEAT Trace: CFtpControlSocket::OnReceive() Response: 211-Features: Trace: CRealControlSocket::OnClose(10053) Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Error: Could not connect to server Status: Waiting to retry... Status: Delaying connection for 1 second due to previously failed connection attempt... Status: Resolving address of makroma-one.net Status: Connecting to 91.67.250.131:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220 Welcome to MAKROMA ! Be aware: This is not a public server! If you are not Trace: CFtpControlSocket::SendNextCommand() Command: USER makromax Trace: CFtpControlSocket::OnReceive() Response: 331 Password required for makromax Trace: CFtpControlSocket::SendNextCommand() Command: PASS Trace: CFtpControlSocket::OnReceive() Response: 230 Logged on Trace: CFtpControlSocket::SendNextCommand() Command: FEAT Trace: CFtpControlSocket::OnReceive() Response: 211-Features:

(Using filezilla-client on the [Win7-GW-PC] itself works fine.)

Hint: After setting debug-mode to 3 for testing and a restarting the filezilla-client just one time the directory was displayed correctly, but that could not be reproduced yet. This might have been a coincidence but leads me to the assumption that timing might be an issue here.

Mike Knife

Hello, There is if a feature I'm missing in FileZilla: Creating a Site profile with:

• Auth type = Normal/Interactive/Ask for Username
• no username
• a password

I connect often to a support sftp server where the login is the TikectID (as username) and a personal password.

If this feature is implemented then upon connection FileZilla will ask for the username and complete the login.

Thanks, Opher.

Building FileZilla on Mac OS X fails with fzputtygen: No such file or directory because of the wrong building order:

cp -f fzsftp ../../FileZilla.app/Contents/MacOS/fzsftp
cp -f fzputtygen ../../FileZilla.app/Contents/MacOS/fzputtygen
cp: fzputtygen: No such file or directory
make[3]: *** [../../FileZilla.app/Contents/MacOS/fzsftp] Error 1
make[3]: *** Waiting for unfinished jobs....
libtool: link: /usr/bin/clang -pipe -Os -arch x86_64 -Wall -g -fexceptions -Wl,-headerpad_max_install_names -arch x86_64 -o fzputtygen fzputtygen-cmdgen.o fzputtygen-import.o fzputtygen-notiming.o fzputtygen-tree234.o  -L/opt/local/lib unix/libfzputtycommon_ux.a libfzputtycommon.a

The following trivial patch for version 3.7.3 should probably fix it:

--- a/src/putty/Makefile.am
+++ b/src/putty/Makefile.am
@@ -81,7 +81,7 @@ if MACAPPBUNDLE
 noinst_DATA = $(top_builddir)/FileZilla.app/Contents/MacOS/fzsftp$(EXEEXT)
 endif
  
-$(top_builddir)/FileZilla.app/Contents/MacOS/fzsftp$(EXEEXT): fzsftp
+$(top_builddir)/FileZilla.app/Contents/MacOS/fzsftp$(EXEEXT): fzsftp fzputtygen
 	mkdir -p $(top_builddir)/FileZilla.app/Contents/MacOS
 	cp -f fzsftp $(top_builddir)/FileZilla.app/Contents/MacOS/fzsftp
 	cp -f fzputtygen $(top_builddir)/FileZilla.app/Contents/MacOS/fzputtygen

As there are lots of broken servers out there, an option to disable the timezone detection completely seems to be reasonable. The effect simply is that all dates parsed are considered UTC.

FileZilla Client only has to copy the URL address of the FTP, it would be great if the ability to make available also copy the URL of the HTTP address, would greatly facilitate our lives. Eg

FTP URL: ​ftp://host @ ftp.host.com / www / menu.php (this feature already exists) HTTP URL: ​http://www.host.com/menu.php (this feature does not exist)

dirparsertest gives the wrong month (7 for september), makes the test fail.

In FZ v3.7.3 (and the last few prior versions), I've noticed that after I've uploaded files via drag-and-drop, the shortcut keys don't work for the menus (Alt+F for File menu, etc.). I must use the mouse to access them---and you know how we keyboard geeks dislike that. :?)

I have downloaded FileZilla 3.7.3 but can't install it. I get the following pop up:

“You must be connected to the internet to complete your installation. Please connect and try again”

I've tested my connection and was definitely connected to the internet. I disabled my firewall and virus protection, but got the same result again and again. Can you help please? Kind regards.

Jan.

I have downloaded FileZilla 3.7.3 but can't install it. I get the following pop up:

“You must be connected to the internet to complete your installation. Please connect and try again”

I've tested my connection and was definitely connected to the internet. I disabled my firewall and virus protection, but got the same result again and again. Can you help please? Kind regards.

Jan.

Hey there i have 2 directory that wont delete in filezilla they are:

Dexter.S08E06.A.Little.Reflection.1080p.WEB-DL.DD5.1.H.264-BS Dexter.S08E06.A.Little.Reflection.720p.WEB-DL.DD5.1.H.264-BS I tried refreshing the directory also force showing directory nothing works for those two directory. I right click on them and press yes to delete then i get this respone: 550 failed to change directory & error faile to retrive directory listing.

Could you fix that for me and delete those 2 directory

thanks

With more developers using GIT or similar Version Control Systems, I have files and folders in my local folders which I must retain, but which I would not want/need to upload to my FTP server.

Similarly, some other developers (working on the same projects, or who have created plugins or other software which I am using) may have failed to properly sanitise their files, resulting in files being on the server which cannot be seen when I have a Filter applied, and which prevent the deletion of some folders (because the folders, containing these hidden files, are not empty).

Attempting to apply a Filter, where "CVS and SVN directories" are filtered locally (so I don't upload them) and not remotely (so I can see them and delete them as needed), when I try and apply Directory Comparison, I get an error:

---------------------------
Directory comparison failed
---------------------------
Cannot compare directories, different filters for local and remote directories are enabled
---------------------------
OK   
---------------------------

Could this alert be modified so that the buttons are "OK" and "Ignore"? Allowing users who want to apply different local and remote filters to do so, but warning other users that they may not be seeing a correct reflection of the local and remote files?

"Response: 552 Disk full - please upload later Error: Critical file transfer error", I keep getting this error, I've tried re-installing, and it didn't work. Please help, I can't upload any files until this ticket is answered. Thank you, for taking the time to read my problem.

After updated to Filezilla Client ver. 3.7.3, the Chinese characters (Chinese (TW))that can displayed correctly in previous version becomes 'Symbols" now. It can only display English characters even I changed language option in "Preference" from system default to Chinese (TW).

I use many connection at the same time to the same servers. If I close Filezilla, and reopen it, I have to manually start them all one after the other. It would be great to have the option so that at startup, the last open sessions are reopened (or at least the tabs are preserved).

I'm using capistrano for deployment.

This creates a datestamp-named folder and updates a symlink called "current".

In FileZilla, refreshing the directory containing this symlink doesn't update the target.

I guess that the destination of the symlink is cached, but can't be in this situation.

Hello,

When you have at least 2 tabs, there is a little cross on the right side of the tab, presumably to close the tab. But when you click on it, it doesn't work. The tab can be right clicked to be closed.

Steps to reproduce : Open two tabs Click the cross to close a tab Expected : the tab closes Bug : nothing happens.

This bug is present in version 3.7.3 on GNU/Linux plateform. I can't reproduce it on Mac OS X.

My window manager is Awesome WM.

it would be nice, when Filezilla client can give a sound when connection is established with a server or when the download is finished. Maybe this can be optional and that the user can browse to a wav file for these actions. I am using Filezilla client version 3.7.3

Entering a password for the FTP proxy containing an ampersand (&), the ampersand character gets discarded, means it does not appear in filezilla.xml . Example password to test with: wRk8!uN3&UHeQ%h Gets stored in filezilla.xml as: wRk8!uN3UHeQ%h Entering the password as wRk8!uN3&amp;UHeQ%h in filezilla.xml does not solve the issue, so retrieving the FTP proxy password with an &amp; entity is also an issue.

FileZilla makes icons fuzzy, when non-default DPI resolution is set on Windows. Look at the example (125% of default 96 DPI):

It's not duplicate of #5604. It was about text scaling, which is fine here.

Good Morning, today I noticed several times the same problem: copying a lot of files (500~1000) to an empty folder I receive (randomly) the message: "the target file already exists, please chose an action ..." In the message box the first file has the correct size, the second file has a size of ZERO byte. I think may be a problem in the creation and copy of the file. I am using the version 3.7.3 on a 64 bit system with win 7. Best regards

I get an "error writing xml file" and several others attached when I try to launch the program. Downloaded it 3X and same thing each time. Wouldn't quit. Had to force quit to move on. Worked fine on the PC.

So.. i just want to upload my files to my website, but the FileZilla wont upload it as what the files like. it's broken. i just hate it. i need to upload a big file more than one time...

I have one of my users complaining that they are getting that message of "No data received" after downloading two files. Is this a known bug?

When you have directory comparison toggled ON and delete a folder from the remote site panel the directory comparison untoggles itself.

Expected behavior would be to keep directory comparisons toggled ON.

Filezilla is a really nice prgram. I think it needs a search and merging module very much.

When transferring a file, saved with ANSI encoding,from my pc to the server (z/OS), the danish national language characters in the file isn't translated correctly (as it used to be in older FZ versions). Å is being translated to $ Æ is being translated to [ Ø is being translated to @

after installing filezilla i changed the default texteditor from notepad to notepad++ Filezilla shows the notepad++ icon on files associated with it, but still opens the files with notepad.

I upload 3 files at the same time(300~700KiB/s per file, >300MB files), it sometimes cause the whole operating system lag.

Add git a filter rule to ignore the .git directory to the filter "CVS and SVN directories". Probably we would also add mercurial at this point thus also ignore .hg directories. A rename then would be adequate: "Ignore source control directories (CVS, SVN, Git, Hg)"

This is an issue that we have observed over the past several years, but have worked around. I just figured perhaps I should inform you because the workaround is getting to be a pain. We use Filezilla to move data folders from our Nuclear Magnetic Resonance spectrometers to individual students' and researchers' computers for data processing. These folders contain a mixture of ASCII and Binary files. When one downloads a data folder with the Transfer Type set to "Auto" the result is corrupted data, presumably because Filezilla fails to recognize the Binary files as distinct from the ASCII files. When one sets the transfer type to "Binary", everything works just fine. The thing is, "Auto" should recognize these files and it apparently does NOT. Each year we introduce a new crop of students to using our spectrometers and the concepts of moving data and inevitably the need to switch data modes gets lost in the shuffle. I would really appreciate it if you guys could fix this.

I have attached a typical data set for you to look at.

Scenario I enable directory comparison and both "compare file size" and "compare time modification" show lots of hilights on directories whose content is absolutely the same.

This happens because Filezilla compares directories the same way it compares files but directories can't be aligned client/server side because their modification time is actually the creation time of the first upload. So, AS SOON as I upload a new directory, it becomes always NEWER than the original and so marked green server side. On the contrary, if I upload a dir, then I delete and recreate it client side, it will be always newer than server side, unless I delete that on the server and upload again. But in this case we get back to the previous problem: on the server I'll have a newer dir. So there is no chance to have it working.

SOLUTION I don't ask you a complex/heavy content recursive analysis (as asked e.g. here ​http://trac.filezilla-project.org/ticket/4424). I don't ask you to to more, I ask you to do less, adding a very much simpler option: "Test only files" which can however do the job for me.

This can probably be implemented in minutes and can save the eyes of millions of users. :-)

PS: I work on Linux client side and server side with the option "preserve timestamp". Everything it's OK for me except these useless hilights on directories.

I have had to reinstall all my softwares after having reinstalled Windows Vista on my computer. Since then, I cannot log to Filezilla. I wonder why. Here find the log: Status: Resolving address of ftp.centreparamita.org Status: Connecting to 67.205.22.147:21... Error: Connection timed out Trace: CFtpControlSocket::ResetOperation(2114) Trace: CControlSocket::ResetOperation(2114) Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of ftp.centreparamita.org Status: Connecting to 67.205.22.147:21... Error: Connection timed out Trace: CFtpControlSocket::ResetOperation(2114) Trace: CControlSocket::ResetOperation(2114) Error: Could not connect to server

Can you answer me to helene@… please?

Procedure: 1) Select filezilla Edit > Settings > 2) In Settings window select Generic proxy 3) In Generic proxy select 'HTTP/1.1 using CONNECT method' enter proxy host eg. 10.9.8.123 enter proxy port: 8080 4) click ok 5) close filezilla client 6) re-launch filezilla client 7) Select Edit > Settings > 8) In Settings window select Generic proxy 9) the host and port details previously entered have been lost. host field is empty and port field states 0

FileZilla Client

Version: 3.7.3

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2013-08-07 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 3.1.11 SQLite: 3.7.16.2

Operating system:

Name: Windows NT 6.1 (build 7601, Service Pack 1) Version: 6.1 Platform: 32 bit system

Version 3.7.3 of Filezilla. Explicit TLS connection to FTP server. Passive mode. Directory listing fails for any directory. Trace attached with sensitive information removed.

I'm using FileZilla client version 3.7.3 and trying to connect to a FTP server. I can connect to the server just fine manually via command shell FTP from my system. I can tell it's running FileZilla server because the output of 'remotehelp server' tells me so.

My FileZilla client never shows folders/files in the remote pane. There's just a message that says 'Not connected to any server'. During the connect process the activity log shows the following and just keeps re-attempting over and over again:

Status: Connecting to [IP Address]... Status: Connection established, waiting for welcome message... Response: 220- Response: 220-* Response: 220 * Command: USER [the user] Response: 331 Password required for [the user] Command: PASS Response: 230 Logged on Command: CLNT FileZilla Error: Could not connect to server

The settings on my client are..... General Tab: Ftp Protocol, Use Plain FTP, Logon Type is Normal. Username & Password set. Advanced Tab: Default (AutoDetect) for server. Nothing else set. Transfer Settings: Transfer mode is Default. Nothing else set. Charset: autodetect. Nothing else set.

I don't have access to the server files to be able to apply the workaround for the preceding seemingly well known issue. Any idea if someone is working on a permanent fix?

I am being forced to use WinSCP ....

GnuTLS error -12: A TLS fatal alert has been received. Error: Could not connect to server

Thank you all for the help.

Hello

There is one setting which I very often change: the max. number of parallel file transfers

It would be great to have an up/down spinner control in the Toolbar to directly change this setting with one mouse click.

Thanks a lot, kind regards, Thomas

Hello

If I create a Directory, I always change to this new directory.

Therefore it would be great to have an additional context menu command: "Create and enter directory". It creates a directory - and automatically change the path into it.

Thanks a lot, kind regards, Thomas

i set a max of 1 connection for a server in site manager and after connecting i see filezilla uploading with 5 connections simultaneously to that server.

Use the delete key to delete a large directory on the server with 1000 or more files in it

Start an upload using drag and drop from the left hand local machine directory pane into another directory

The delete is aborted in mid progress

Try it the other way around - with a long upload in progress - delete a different directory - upsets the upload but can recover

I regularly upload 5000 plus files - there is a mix of small ones (under 100k) and large ones (over 50M)and several files that have not changed at all - so use overwrite only if changed

You operate two parallel ftp channels. These tend to be response time limit when dealing with short files and bandwidth limited when transferring large files.

By selecting one channel only to do the biggest files first and the other to do smallest files first, you will get better use of bandwidth

I regularly upload 5000 plus files - there is a mix of small ones (under 100k) and large ones (over 50M)and several files that have not changed at all - so use overwrite only if changed

You operate two parallel ftp channels. These tend to be response time limit when dealing with short files and bandwidth limited when transferring large files.

By selecting one channel only to do the biggest files first and the other to do smallest files first, you will get better use of bandwidth

I regularly upload 5000 plus files - there is a mix of small ones (under 100k) and large ones (over 50M)and several files that have not changed at all - so use overwrite only if changed

You operate two parallel ftp channels. These tend to be response time limit when dealing with short files and bandwidth limited when transferring large files.

By selecting one channel only to do the biggest files first and the other to do smallest files first, you will get better use of bandwidth

Also note with a 60M line running more channels goes faster (test done by running two Filezilla instances concurrently)

I have a large number of websites with the same or very similar directory structures. There is a risk I make errors and upload from the wrong directory.

On the local site pane, could you consider placing a user controlled optional padlock against a directory such that you cannot, when padlocked, navigate outside that directory and its children. Then have that directory included in the remembered profile for a particular ftp address.

Now when you open an ftp address you will have the relevant local file area showing.

I am transferring files from one computer to another and it does not preserve the date/time information. Under transfer, I have a checkmark by the line to preserve that information.

When I use FileZilla to transmit large .txt files, it sometimes sends them over and over again until I catch it. Obviously this causes problems in my workflow and that might be the case for other people too.

This is very similar to bug 4667: ​http://trac.filezilla-project.org/ticket/4667 but I think it is very important to bring this up again, as the excuse that the code relies on a clearly inadequate API is, IMHO, not acceptable for this actually DANGEROUS behaviour! I copied a file from one directory to another, decided I didn't want it there, and subsequently deleted it - only to discover that the file was NOT copied but instead moved, despite visual indications to the contrary, thus removing the only instance of that file entirely!

In fact, I'm not even convinced by the argument that the Windows drag-and-drop cursor cannot not display a plus sign - it regularly doesn't when I am MOVING files in Windows Explorer. Or if you are correct in that it doesn't, then a different icon system should be used. You mention that FTP can't do copy - that's fine if it can't, but you should give users any sort of visual indication that this is the case!

And before anyone says it, the fact that I should have had a backup is not applicable in this case - the copy was an effort to MAKE a backup! It your tool informs you, quite clearly, that you have TWO copies of a file, when it is hiding the fact that you only have one, then the tool is at fault and needs correcting!

Patch that fixes #2978, natural sorting like Windows Explorer & Nautilus for Filezilla client

allow to define generic proxy per site. the rule is:

1. if define generic proxy per site, it will use it (ignore bypass proxy setting)
2. if no generic proxy per site, and if bypass proxy, it will connect directly
3. if no generic proxy per site, and if not bypass proxy, it will use system's generic proxy if defined.

When using the Windows command line ftp program, I am successful in connecting to a site, getting a directory listing, and transferring a file. However, after successfully loggin in, the FileZilla GUI fails when it asks for a directory listing.

Status: Connecting to 141.157.27.118:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220-FileZilla Server version 0.9.40 beta Trace: CFtpControlSocket::OnReceive() Response: 220-written by Tim Kosse (Tim.Kosse@…) Trace: CFtpControlSocket::OnReceive() Response: 220 Please visit ​http://sourceforge.net/projects/filezilla/ Trace: CFtpControlSocket::SendNextCommand() Command: USER Samsung Trace: CFtpControlSocket::OnReceive() Response: 331 Password required for samsung Trace: CFtpControlSocket::SendNextCommand() Command: PASS * Trace: CFtpControlSocket::OnReceive() Response: 230 Logged on Status: Connected Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: Measured latency of 207 ms Status: Retrieving directory listing... Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: CWD /users/ftp/Samsung Trace: CFtpControlSocket::OnReceive() Response: 550 CWD failed. "/users/ftp/Samsung": directory not found. Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/" is current directory. Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: TYPE I Trace: CFtpControlSocket::OnReceive() Response: 200 Type set to I Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (141,157,27,118,7,15) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: MLSD Trace: CFtpControlSocket::OnReceive() Response: 425 Can't open data connection. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Error: Failed to retrieve directory listing Trace: CFtpControlSocket::OnReceive() Response: 421 Connection timed out. Trace: Unexpected reply, no reply was pending. Trace: CRealControlSocket::OnClose(0) Error: Connection closed by server

These ciphers and MAC were added to OpenSSH 6.2 release. Unfortunately, FileZilla 3.7.3 wont connect via SFTP protocol to my servers that exclusively use these ciphers and MAC.

when we currently paste such ftp path (s)​ftp://user:password@host/directory into filezilla it's extracted in the way:

user password host /directory

the last part is not corrected it should be just "directory" without leading slash

why it make different?

on most ftp systems, root directory == user directory (and it make no difference)

when - for security reasons - account is chrooted, then slash from beginning point outside user directory and the path can't be found

example:

(s)​ftp://user:password@host/directory

on our system (with chroot) /bin /data (it's user "home" directory) /data/directory /dev /etc ....

so runing cd /directory will fail, but when you login (your current directory is set to /data) and try cd directory (relative path) everything will work fine.

so the whole bug is about removing 1st slash from directory path. (only 1st, because path like (s)​ftp://user:password@host//data/directory should work - in this case your using absolute path)

such way of parsing path is used for example in FF (and other programs)

if you have any questions please let me know.

I can also prepare test (valid for 24h) account on our system (but I can't share it by ticketing system, so please mail me if such account would be helpful)

Regards, Bartosz

i have this new problem Could not write to transfer socket: ECONNABORTED

I saw the other postings but links are expired patch, was also another version of filezilla, and this post is new, new version of filezilla, please help Thank you.

Please try to block the user maskodok and delete the spam (last message) in ticket #8272. I noticed ​http://trac.filezilla-project.org/wiki/SpamLog, but I don't have sufficient rights to add the ticket to the list.

Need an option for more log files.

Having 1 complete long running log file is great for debugging, but what about people who need to process those things, or even just try to figure them out.

I propose at the Program Preferences level, X options,

1. Keep what it currently uses, 1 big file limited by MB.
2. Create a Log file for each Site (FZ-Client_Log_[SITENAME]_[DATETIME].log)
3. Both 1 & 2.
4. Keep NO LOG FILE! (Warning, no log file = no chance in getting quality support from filezilla-project.org.

Then at the Site Level Preferences, At this level, give users some options, what to log, log name format.

This all stems from trying to sort through a massive log file, that includes data from dozens of sites. It's nuts. I know I'm having a problem with 1 site, I just want to see that 1 sites log.

Or is there a Log File Anal-yzer that can handle this?

Thanks for your time.

I last used filezilla in Sept 2012 with no problems, now I cannot log in.

Status: Resolving address of www.fabuloso-splendido.co.uk Status: Connecting to 193.227.106.105:21... Status: Connection established, waiting for welcome message... Response: 220 Gene6 FTP Server v3.10.0 (Build 2) ready... Command: USER fabuloso-splendido.co.uk Response: 331 Password required for fabuloso-splendido.co.uk. Command: PASS Response: 530 Login or Password incorrect. Error: Critical error Error: Could not connect to server

I'm using windows 7 and the latest version of filezilla 3.7.3 My site is hosted with Mrsite Ive tried my password in both upper and lowercase my firewall is set to allow filezilla through although I have tied with my firewall turned off completely but that had no affect. I have also tried shortening my user to fabuloso-splendido and fabuloso-splendido.c as Mr site says: If your website address is longer than 20 letters (e.g.myfirstwebsiteishere.com) then your FTP username will be the first 20 letters only (so, you would use myfirstwebsiteishere). The password is your original Mr Site activation code in UPPER case.

I have also tried switching between passive and active modes, with all variations of above and still no affect.

when using the config wizard this is the report Connecting to probe.filezilla-project.org Response: 220 FZ router and firewall tester ready USER FileZilla Response: 331 Give any password. PASS 3.7.3 Response: 230 logged on. Checking for correct external IP address Retrieving external IP address from ​http://ip.filezilla-project.org/ip.php Checking for correct external IP address IP 90.216.214.187 ja-cbg-cbe-bih Response: 200 OK PREP 62325 Response: 200 Using port 62325, data token 746320053 PORT 90,216,214,187,243,117 Response: 200 PORT command successful LIST Response: 150 opening data connection

Would really appreciate some help please. Thanks

When trying to do multi-select by clicking on an empty spot in the file list, rather than bringing up the drag lines, the pointer flies to the top-right corner of the screen and scrolls the file list to the top. This occurs in both the local and remote file lists.

This is only on empty space where a file would not be selected. If a file is selected on click this issue does not occur. It also only occurs if the file list has more files than will fit without scrolling, and if it has been scrolled down.

I tried to make a user with password 123 . i made it then i opened up the filezilla client , i entered user's name and the password (wich was 123) then it said Login Incorrect . But when i went back to the Server i saw that the password was changed to some random numbers wich are 20 chars long . Please help .

If there is only one host, it would be nice if FileZilla automatically connected when it was launched, instead of having to do so manually. This could be an enable/disable feature, also with a "default" host if there's more than one. - Thanks!

After downloading the setup file for 3.7.3, I try to run and get an error message, "Error writing temporary file. Make sure your temp folder is valid." Which temp folder is this referring to and how does one make it valid?

Previously, I would like to say thank you very much for this great application. I find it so helpful to me by using this application. So, I would like to help by reporting a bug.

Bug's Trigger :

1. Do a Site Connect by clicking on the Site Manager's dropdown button and choose the site I want to connect
2. Connection occurs
3. After a successful connection, the bug appears on the Toolbar
4. Look of the Toolbar seems to be weird / not normal
5. I tried to change the theme by going to Edit > Settings > Interface > Themes > and select the other theme options than those currently in use
6. Look of the Toolbar return to normal view

System Detail FileZilla Client

Version: 3.7.3

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2013-08-07 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 3.1.11 SQLite: 3.7.16.2

Operating system:

Name: Windows NT 6.1 (build 7600) Version: 6.1 Platform: 32 bit system

Status: Resolving address of ftp.centreparamita.org Status: Connecting to 67.205.22.147:21... Status: Connection attempt failed with "ETIMEDOUT - Connection attempt timed out". Trace: CRealControlSocket::OnClose(10060) Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Error: Could not connect to server Status: Waiting to retry... Status: Delaying connection for 1 second due to previously failed connection attempt... Status: Resolving address of ftp.centreparamita.org Status: Connecting to 67.205.22.147:21... Status: Connection attempt failed with "ETIMEDOUT - Connection attempt timed out". Trace: CRealControlSocket::OnClose(10060) Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Error: Could not connect to server Status: Resolving address of ftp.centreparamita.org Status: Connecting to 67.205.22.147:21... Status: Connection attempt failed with "ETIMEDOUT - Connection attempt timed out". Trace: CRealControlSocket::OnClose(10060) Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of ftp.centreparamita.org Status: Connecting to 67.205.22.147:21... Status: Connection attempt failed with "ETIMEDOUT - Connection attempt timed out". Trace: CRealControlSocket::OnClose(10060) Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Error: Could not connect to server Status: Resolving address of ftp.centreparamita.org Status: Connecting to 67.205.22.147:21... Status: Connection attempt failed with "ETIMEDOUT - Connection attempt timed out". Trace: CRealControlSocket::OnClose(10060) Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of ftp.centreparamita.org Status: Connecting to 67.205.22.147:21... Status: Connection attempt failed with "ETIMEDOUT - Connection attempt timed out". Trace: CRealControlSocket::OnClose(10060) Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Error: Could not connect to server

When we login with Filezill all time stamps that we FTP'd show 7 hours behind PST. GMT is 7 hours ahead. PST time 2:22PM time of file Filezilla 7:22AM GMT is 9:22PM

How do we fix this?

corrupted files even though say OK. here is screenshot so you can see the size of files are different, note the G4 SY Master.xmp which has completed. Seems to be related to a "resume" since I was disconnected and the transfer restarted automatically.

Here is log: Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Command: SYST Response: 215 Windows_NT Command: FEAT Response: 211-Extended features supported: Response: SIZE Response: MDTM Response: 211 END Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current directory. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,143). Command: LIST Response: 125 Data connection already open; Transfer starting. Response: 226 Transfer complete. Status: Directory listing successful Status: Retrieving directory listing... Command: CWD NEW EXPORTS FROM REN Error: Connection timed out Error: Failed to retrieve directory listing Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: CWD / Response: 250 CWD command successful. Command: PWD Response: 257 "/" is current directory. Command: CWD NEW EXPORTS FROM REN Response: 250 CWD command successful. Command: PWD Response: 257 "/NEW EXPORTS FROM REN" is current directory. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,146). Command: LIST Response: 125 Data connection already open; Transfer starting. Response: 226 Transfer complete. Status: Directory listing successful Status: Retrieving directory listing... Command: CWD G4 SY Dvd Assets new Response: 250 CWD command successful. Command: PWD Response: 257 "/NEW EXPORTS FROM REN/G4 SY Dvd Assets new" is current directory. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,147). Command: LIST Response: 125 Data connection already open; Transfer starting. Response: 226 Transfer complete. Status: Calculating timezone offset of server... Command: MDTM G4 SY Master.m2v Response: 213 20131024121555 Status: Timezone offsets: Server: -14400 seconds. Local: -14400 seconds. Difference: 0 seconds. Status: Directory listing successful Status: Connecting to 208.124.197.26:21... Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.xmp Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.wav Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 250 CWD command successful. Command: PWD Response: 257 "/NEW EXPORTS FROM REN/G4 SY Dvd Assets new" is current directory. Command: TYPE I Response: 250 CWD command successful. Command: PWD Response: 200 Type set to I. Command: PASV Response: 257 "/NEW EXPORTS FROM REN/G4 SY Dvd Assets new" is current directory. Command: TYPE I Response: 227 Entering Passive Mode (208,124,197,26,21,148). Command: RETR G4 SY Master.wav Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,149). Command: RETR G4 SY Master.xmp Response: 125 Data connection already open; Transfer starting. Response: 125 Data connection already open; Transfer starting. Error: Connection timed out Error: File transfer failed after transferring 36,400 bytes in 35 seconds Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.xmp Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,150). Command: REST 36400 Response: 350 Restarting at 36400. Command: RETR G4 SY Master.xmp Response: 125 Data connection already open; Transfer starting. Response: 421 Timeout (120 seconds): closing control connection. Response: 421 Terminating connection. Error: Connection closed by server Response: 226 Transfer complete. Status: File transfer successful, transferred 1,295,147 bytes in 138 seconds Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.m2v Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,151). Command: REST 0 Response: 350 Restarting at 0. Command: RETR G4 SY Master.m2v Response: 125 Data connection already open; Transfer starting. Error: Connection timed out Error: File transfer failed after transferring 5,401,141 bytes in 610 seconds Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.wav Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,152). Command: REST 5401141 Response: 350 Restarting at 5401141. Command: RETR G4 SY Master.wav Response: 125 Data connection already open; Transfer starting. Error: Connection timed out Error: File transfer failed after transferring 8,477,636 bytes in 979 seconds Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.m2v Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,153). Command: REST 8477636 Response: 350 Restarting at 8477636. Command: RETR G4 SY Master.m2v Response: 125 Data connection already open; Transfer starting. Error: Transfer connection interrupted: ECONNABORTED - Connection aborted Error: Disconnected from server: ECONNABORTED - Connection aborted Error: File transfer failed after transferring 35,355,767 bytes in 18779 seconds Error: Transfer connection interrupted: ECONNABORTED - Connection aborted Error: Disconnected from server: ECONNABORTED - Connection aborted Error: File transfer failed after transferring 39,832,699 bytes in 19329 seconds Status: Connecting to 208.124.197.26:21... Status: Connection attempt failed with "EHOSTUNREACH - No route to host". Error: Could not connect to server Status: Connecting to 208.124.197.26:21... Status: Connection attempt failed with "EHOSTUNREACH - No route to host". Error: Could not connect to server Status: Delaying connection for 5 seconds due to previously failed connection attempt... Status: Delaying connection for 5 seconds due to previously failed connection attempt... Status: Connecting to 208.124.197.26:21... Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.wav Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.m2v Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 250 CWD command successful. Response: 250 CWD command successful. Command: TYPE I Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,200). Command: REST 45233840 Response: 227 Entering Passive Mode (208,124,197,26,21,201). Command: REST 43833403 Response: 350 Restarting at 45233840. Command: RETR G4 SY Master.wav Response: 350 Restarting at 43833403. Command: RETR G4 SY Master.m2v Response: 125 Data connection already open; Transfer starting. Response: 125 Data connection already open; Transfer starting. Error: Connection timed out Error: File transfer failed after transferring 52,762,887 bytes in 1781 seconds Status: Connecting to 208.124.197.26:21... Error: Connection timed out Error: File transfer failed after transferring 51,105,114 bytes in 1782 seconds Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.wav Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.m2v Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 250 CWD command successful. Response: 250 CWD command successful. Command: TYPE I Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,220). Command: REST 97996727 Response: 227 Entering Passive Mode (208,124,197,26,21,221). Command: REST 94938517 Response: 350 Restarting at 97996727. Command: RETR G4 SY Master.wav Response: 350 Restarting at 94938517. Command: RETR G4 SY Master.m2v Response: 125 Data connection already open; Transfer starting. Response: 125 Data connection already open; Transfer starting. Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,222). Command: LIST Response: 125 Data connection already open; Transfer starting. Response: 226 Transfer complete. Status: Directory listing successful Status: Retrieving directory listing... Command: CDUP Response: 250 CWD command successful. Command: PWD Response: 257 "/NEW EXPORTS FROM REN" is current directory. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,223). Command: LIST Response: 125 Data connection already open; Transfer starting. Response: 226 Transfer complete. Status: Directory listing successful Error: Connection timed out Error: File transfer failed after transferring 32,266,124 bytes in 2091 seconds Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.wav Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,227). Command: REST 130262851 Response: 350 Restarting at 130262851. Command: RETR G4 SY Master.wav Response: 125 Data connection already open; Transfer starting. Error: Connection timed out Error: File transfer failed after transferring 37,412,485 bytes in 2792 seconds Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.m2v Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,228). Command: REST 132351002 Response: 350 Restarting at 132351002. Command: RETR G4 SY Master.m2v Response: 125 Data connection already open; Transfer starting. Error: Connection timed out Error: File transfer failed after transferring 7,832,393 bytes in 893 seconds Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.wav Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,232). Command: REST 138095244 Response: 350 Restarting at 138095244. Command: RETR G4 SY Master.wav Response: 125 Data connection already open; Transfer starting. Error: Connection timed out Error: File transfer failed after transferring 1,676,733 bytes in 219 seconds Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.m2v Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,233). Command: REST 134027735 Response: 350 Restarting at 134027735. Command: RETR G4 SY Master.m2v Response: 125 Data connection already open; Transfer starting. Error: Connection timed out Error: File transfer failed after transferring 16,715,824 bytes in 1676 seconds Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.m2v Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,234). Command: REST 150743559 Response: 350 Restarting at 150743559. Command: RETR G4 SY Master.m2v Response: 125 Data connection already open; Transfer starting. Error: Connection timed out Error: File transfer failed after transferring 11,362,324 bytes in 1047 seconds Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.m2v Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,235). Command: REST 162105883 Response: 350 Restarting at 162105883. Command: RETR G4 SY Master.m2v Response: 125 Data connection already open; Transfer starting. Error: Disconnected from server: ECONNABORTED - Connection aborted Error: Disconnected from server: ECONNABORTED - Connection aborted Error: File transfer failed after transferring 102,786,797 bytes in 7211 seconds Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.wav Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,22,0). Command: REST 240882041 Response: 350 Restarting at 240882041. Command: RETR G4 SY Master.wav Response: 125 Data connection already open; Transfer starting. Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,22,2). Command: LIST Response: 125 Data connection already open; Transfer starting. Response: 226 Transfer complete. Status: Directory listing successful

When deleting only one file (maybe few more) maybe it is better to show which files about to delete? At now filezilla only shows Yes or No prompt.

Hi,

Could you please add forward/back and up/down directory buttons to the local and remote pane headers. Currently, the only way seems to be to either edit the file path, or to scroll to the top of the directory listing and click on the up one level .. icon, neither of which is efficient. I came to FileZilla from CuteFTP and your application is superior in most respects, except for this detail.

Thanks in advance and keep up the good work, Pete Clayton

I'm using Filezilla for a couple of years now to copy files to and from my mediacenter hard-drive. Everything worked fine till today. When connecting to the disk (in this case acting as an ftp server), it shows all my drives as files. And therefore they won't open up in Filezilla. I'm just getting odd error messages like "file copy failed". I tried another FTP-application and it opens up fine, also when using Firefox, there are no problems at all.

I also tried re-installing Filezilla and we are using the latest version of the software on Windows 7 Professional SP1.

I'm trying to upload a directory (with files and subdirectories) from an external USB HD. FileZilla doesn't create the directory structure. This results in a failure of the upload. When trying to upload the same files from the local drive everything works.

I have this structure locally:

C is the local Drive, F the external USB HD.

C:/folder/file.txt F:/folder/file.txt

I have this structure remotely:

/

The action I've tried:

1. Local F:/folder --Drag--> Remote / : fails
2. Remote make directory folder/ and local F:/folder/file.txt --Drag--> remove /folder : works
3. local C:/folder --Drag--> remote / : works
4. local F:/folder/file.txt --Drag--> remote / : works

I hope this is sufficient information.

After installing the latest version of Filezilla (version info at the bottom) I noticed that I cannot move the FileZilla window around the desktop. It is fixed in the location in which it opened.

I've tried clickng and dragging, closing and reopening FileZilla to no avail. The window is stuck in a single location. I click & hold on the top of the window (as you normally would) to move the window and nothing happens.

Sorry I can give yo more detials but that's pretty much it.

FileZilla Client

Version: 3.7.3

Build information:

Compiled for: i686-apple-darwin9 Compiled on: i386-apple-darwin9.8.0 Build date: 2013-08-07 Compiled with: i686-apple-darwin9-gcc-4.2.1 (GCC) 4.2.1 (Apple Inc. build 5577) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 3.1.11 SQLite: 3.7.6.2

Operating system:

Name: Mac OS X (Darwin 13.0.0 x86_64) Version: 16.144

FileZilla Client: 3.7.3 Protocol: SFTP Server type: Unix Problem: a directory listing in Polish server locale fails when the returned dates are in the month October and in the "short-month-name day hour:minute" form, e.g. -rw-------. 1 owner group 345306 paź 14 21:17 file-name FileZilla Client will see this object as a file named "paź 14 21:17 file-name" with no date/time assigned. You can't download such file or browse to such directory, because the name FileZilla shows and uses doesn't actually exist on the server. The reason for this is the Polish "ź" letter in the "paź" word (which is Polish for "Oct"). FileZilla doesn't seem to recognise the encoding. Changing the encoding in FileZilla doesn't help. Changing the server type in FileZilla doesn't help either. Possible solutions:

• use listing that displays dates in a predefined format, e.g. YYYY-MM-DD, if possible,
• allow the user to specify the command to use for listing, if possible,
• add the problematic character to the codes to have it recognised.

The patch that will be attached to this ticket adds support for ISO-8859-2 and UTF-8 encodings for the letter and additionally adds the sequence that the particular problematic server sent. Tested, works.

When I chose an option from my servers list, the option I chose stays on the screen, like floating. Check the image for more info. Quitting FZ doesn't remove it.

I know this has been asked for in the past - there is a reason that the DEBUG file does not provide the desired output... The DEBUG file is the step by step FTP commands that execute during a session. The [Results] frame in the [Remote file search] dialog includes the full path associated with the (filename) result in the same line - in DEBUG file the directory listing COMMAND is a completely different line in the output. My request is to add a button or right-click option to [export to csv] like function. I will add files with details...

I am having a similar issue with certificates signed by DigiCert. The certificate is not trusted despite it originating from a trusted CA. Other clients handle this perfectly (Transmit, Fetch, Cyberduck - even PHPStorm allows for connections over TLS using this certificate chain).

This has been confirmed on both OSX and Windows 7 running the latest Filezilla release of 3.7.3.

In Windows 7 (and maybe Vista) they introduced the recently used popup on applications. For example, if you go to Microsoft Word on the start menu, there is a little arrow to the right of it that will popup recently opened or pinned documents.

It would be nice if Filezilla would use this for recently connected to sites.

When I upload a file it uploads fully then restarts the upload infinitely. It will not save to location. I've tried all the different options for "action after queue completion" but none seem to let the fully uploaded file enter my directory.

Here is the report: "Status: Resolving address of ftp.w3e.subsplash.com Status: Connecting to 206.130.130.221:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [TLS] ---------- Response: 220-Local time is now 09:33. Server port: 21. Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 2 minutes of inactivity. Command: USER 5KJB2V Response: 331 User 5KJB2V OK. Password required Command: PASS Response: 230-User 5KJB2V has group access to: 403 402 12 61 Response: 230- 482 Response: 230-OK. Current directory is / Response: 230 2095032 Kbytes used (99%) - authorized: 2097152 Kb Command: SYST Response: 215 UNIX Type: L8 Command: FEAT Response: 211-Extensions supported: Response: EPRT Response: IDLE Response: MDTM Response: SIZE Response: REST STREAM Response: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; Response: MLSD Response: ESTP Response: PASV Response: EPSV Response: SPSV Response: ESTA Response: AUTH TLS Response: PBSZ Response: PROT Response: UTF8 Response: 211 End. Command: OPTS UTF8 ON Response: 200 OK, UTF-8 enabled Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (206,130,130,221,184,175) Command: MLSD Response: 150 Accepted data connection Response: 226-ASCII Response: 226-Options: -l Response: 226 70 matches total Status: Directory listing successful Command: DELE 01 Growth.mp3 Response: 250-2088440 Kbytes used (99%) - authorized: 2097152 Kb Response: 250 Deleted 01 Growth.mp3 Status: Resolving address of ftp.w3e.subsplash.com Status: Connecting to 206.130.130.221:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [TLS] ---------- Response: 220-Local time is now 09:34. Server port: 21. Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 2 minutes of inactivity. Command: USER 5KJB2V Response: 331 User 5KJB2V OK. Password required Command: PASS Response: 230-User 5KJB2V has group access to: 403 402 12 61 Response: 230- 482 Response: 230-OK. Current directory is / Response: 230 2088440 Kbytes used (99%) - authorized: 2097152 Kb Command: OPTS UTF8 ON Response: 200 OK, UTF-8 enabled Status: Connected Status: Starting upload of C:\Users\Jeff\Music\iTunes\iTunes Media\Podcasts\Park Valley Church\01 Growth.mp3 Command: CWD / Response: 250 OK. Current directory is / Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (206,130,130,221,141,123) Command: STOR 01 Growth.mp3 Response: 150 Accepted data connection Response: 550-Quota exceeded: 01 Growth.mp3 won't be saved Response: 550 2088440 Kbytes used (99%) - authorized: 2097152 Kb Error: File transfer failed after transferring 33,682,048 bytes in 56 seconds Status: Starting upload of C:\Users\Jeff\Music\iTunes\iTunes Media\Podcasts\Park Valley Church\01 Growth.mp3 Status: Retrieving directory listing... Command: PASV Response: 227 Entering Passive Mode (206,130,130,221,50,183) Command: MLSD Response: 150 Accepted data connection Response: 226-ASCII Response: 226-Options: -l Response: 226 69 matches total Command: PASV Response: 227 Entering Passive Mode (206,130,130,221,36,183) Command: STOR 01 Growth.mp3 Response: 150 Accepted data connection Status: Retrieving directory listing... Command: CDUP Response: 250 OK. Current directory is / Command: PWD Response: 257 "/" is your current location Status: Directory listing successful Response: 550-Quota exceeded: 01 Growth.mp3 won't be saved Response: 550 2088440 Kbytes used (99%) - authorized: 2097152 Kb Error: File transfer failed after transferring 33,682,048 bytes in 59 seconds Status: Starting upload of C:\Users\Jeff\Music\iTunes\iTunes Media\Podcasts\Park Valley Church\01 Growth.mp3 Status: Retrieving directory listing... Command: PASV Response: 227 Entering Passive Mode (206,130,130,221,250,107) Command: MLSD Response: 150 Accepted data connection Response: 226-ASCII Response: 226-Options: -l Response: 226 69 matches total Command: PASV Response: 227 Entering Passive Mode (206,130,130,221,142,181) Command: STOR 01 Growth.mp3 Response: 150 Accepted data connection Response: 550-Quota exceeded: 01 Growth.mp3 won't be saved Response: 550 2088440 Kbytes used (99%) - authorized: 2097152 Kb Error: File transfer failed after transferring 33,682,048 bytes in 55 seconds Status: Starting upload of C:\Users\Jeff\Music\iTunes\iTunes Media\Podcasts\Park Valley Church\01 Growth.mp3 Status: Retrieving directory listing... Command: PASV Response: 227 Entering Passive Mode (206,130,130,221,47,253) Command: MLSD Response: 150 Accepted data connection Response: 226-ASCII Response: 226-Options: -l Response: 226 69 matches total Command: PASV Response: 227 Entering Passive Mode (206,130,130,221,93,136) Command: STOR 01 Growth.mp3 Response: 150 Accepted data connection Error: Connection closed by server Response: 550-Quota exceeded: 01 Growth.mp3 won't be saved Response: 550 2088440 Kbytes used (99%) - authorized: 2097152 Kb Error: File transfer failed after transferring 33,682,048 bytes in 55 seconds Status: Starting upload of C:\Users\Jeff\Music\iTunes\iTunes Media\Podcasts\Park Valley Church\01 Growth.mp3 Status: Retrieving directory listing... Command: PASV Response: 227 Entering Passive Mode (206,130,130,221,255,96) Command: MLSD Response: 150 Accepted data connection Response: 226-ASCII Response: 226-Options: -l Response: 226 69 matches total Command: PASV Response: 227 Entering Passive Mode (206,130,130,221,58,185) Command: STOR 01 Growth.mp3 Response: 150 Accepted data connection Error: File transfer aborted by user after transferring 3,604,480 bytes in 6 seconds Response: 226-2091960 Kbytes used (99%) - authorized: 2097152 Kb Response: 226-File successfully transferred Response: 226 6.695 seconds (measured here), 0.51 Mbytes per second Status: Disconnected from server Status: Resolving address of ftp.w3e.subsplash.com Status: Connecting to 206.130.130.221:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [TLS] ---------- Response: 220-Local time is now 09:41. Server port: 21. Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 2 minutes of inactivity. Command: USER 5KJB2V Response: 331 User 5KJB2V OK. Password required Command: PASS Response: 230-User 5KJB2V has group access to: 403 402 12 61 Response: 230- 482 Response: 230-OK. Current directory is / Response: 230 2091960 Kbytes used (99%) - authorized: 2097152 Kb Command: OPTS UTF8 ON Response: 200 OK, UTF-8 enabled Status: Connected Status: Starting upload of C:\Users\Jeff\Music\iTunes\iTunes Media\Podcasts\Park Valley Church\01 Growth.mp3 Command: CWD / Response: 250 OK. Current directory is / Status: Retrieving directory listing... Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (206,130,130,221,244,170) Command: MLSD Response: 150 Accepted data connection Response: 226-ASCII Response: 226-Options: -l Response: 226 70 matches total Command: PASV Response: 227 Entering Passive Mode (206,130,130,221,238,150) Command: STOR 01 Growth.mp3 Response: 150 Accepted data connection Status: Resolving address of ftp.w3e.subsplash.com Status: Connecting to 206.130.130.221:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [TLS] ---------- Response: 220-Local time is now 09:41. Server port: 21. Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 2 minutes of inactivity. Command: USER 5KJB2V Response: 331 User 5KJB2V OK. Password required Command: PASS Response: 230-User 5KJB2V has group access to: 403 402 12 61 Response: 230- 482 Response: 230-OK. Current directory is / Response: 230 2088440 Kbytes used (99%) - authorized: 2097152 Kb Command: OPTS UTF8 ON Response: 200 OK, UTF-8 enabled Status: Connected Response: 550-Quota exceeded: 01 Growth.mp3 won't be saved Response: 550 2088440 Kbytes used (99%) - authorized: 2097152 Kb Error: File transfer failed after transferring 33,682,048 bytes in 94 seconds Status: Starting upload of C:\Users\Jeff\Music\iTunes\iTunes Media\Podcasts\Park Valley Church\01 Growth.mp3 Status: Retrieving directory listing... Command: PASV Response: 227 Entering Passive Mode (206,130,130,221,239,30) Command: MLSD Response: 150 Accepted data connection Response: 226-ASCII Response: 226-Options: -l Response: 226 69 matches total Command: PASV Response: 227 Entering Passive Mode (206,130,130,221,94,29) Command: STOR 01 Growth.mp3 Response: 150 Accepted data connection Error: File transfer aborted by user after transferring 4,128,768 bytes in 10 seconds Response: 226-2092472 Kbytes used (99%) - authorized: 2097152 Kb Response: 226-File successfully transferred Response: 226 10.584 seconds (measured here), 380.95 Kbytes per second Status: Starting download of /01 Growth.mp3 Status: Retrieving directory listing... Command: PASV Response: 227 Entering Passive Mode (206,130,130,221,66,19) Command: MLSD Response: 150 Accepted data connection Response: 226-ASCII Response: 226-Options: -l Response: 226 70 matches total Status: Skipping download of /01 Growth.mp3 Status: File transfer successful, transferred 9,313 bytes in 3 seconds"

Is there no way to copy a listing of the files in a directory to a text file or spreadsheet? There is frequently a need for me to manage, sort, compare and so on, files within my directories. I realize that they can be "clicked" and the filename copied one at a time, but that's really time consuming. I'm really surprised that there isn't such a feature. Especially since I've seen others asking for it.

Add the Right Mouse Button actions menu in the Edited Dialog (Ctrl+E) please, and hotkey ctrl+a. coz its very slow to use buttons/

I have installed two sftp servers in windows 7. I always use filezilla client for any connection and all works right. But in this special case with windows, I got the problem that the date reported in remote sever by filezilla was very wrong. The client reports a datetime near in 1969 year, but the files were modified in this year 2013.

By the way I'm using ubuntu.

I tried another client GFTP and the date error dissapeared. Please fix it.

cliente Filezilla v. 3.5.3 server: windows 7 professional / Core FTP Server I used before fresSSHd server with the same result.

For Windows systems, please show "desktop" as the highest folder in the left column.

Output from the LIST command is not sorted. I think the assumption is that the FTP client will sort it if necessary. Unfortunately, this is not always the case. We're trying to use it with old numerical controllers on the factory floor that do not sort the output. Makes it very difficult to find your NC program file in a long listing.

It'd be nice if the FileZilla Server had an option to sort the LIST output before sending it to the client. The option could be on for any FTP connection, by group or by user.

FTP is used a lot for automated internal data transfers between systems at night, etc. Some of these systems have a need to parse the LIST output. This can be hard to do when each FTP server's output is slightly different. See attachment.

What would make FileZilla Server extremely powerful would be if the user could define the format of LIST output, for those cases where it's not possible to define it on the client system. For example:

1 type 2 perms 12 links 15 user 24 group 32 size 42 date 55 filename:

1 2 3 4 5 6 7 8

12345678901234567890123456789012345678901234567890123456789012345678901234567890 -r-xr-xr-x 1 noone nogroup 148943 Apr 29 2013 042913 -r-xr-xr-x 1 noone nogroup 53 Aug 30 2012 1 -r-xr-xr-x 1 noone nogroup 2492297 Oct 18 14:05 10181301 -r-xr-xr-x 1 noone nogroup 88260 Oct 18 14:10 10181302

Would define which column each field should be displayed. Unlisted fields would not be displayed:

1 filename 14 size 25 date

1 2 3 4

1234567890123456789012345678901234567890

Would look like this:

042913 148943 Apr 29 2013 ABCDEFGH.EXT 53 Aug 30 2012 10181301 2492297 Oct 18 14:05 10181302 88260 Oct 18 14:10 10181303 798 Oct 18 14:19

The format string could be specified by the admin in the settings area of FileZilla. It be most useful if there is a global setting and also each login could have it's own format to override the global definition.

EMET 4.1 SimExecFlow triggers an "appcrash" with exception code c000001d in fzsftp.exe.

FileZilla Client 3.7.3 OS: Windows 7 SP1 x64

it is possible in the transfert options to add the ability to choose the priority of transfer based on the size of the file by setting the maximum size that the file I need to be transferred first

Upon switching from one file to another to upload, recently I have been receiving the following error messages every time:

Error: Network error: Software caused connection abort Error: Failed to retrieve directory listing

Downloads not following que in the order they were added

SFTP Server is IBM Sterling proprietary SFTP Server, The GUI explorer modify date column mixed with path name, see attachments screenshots, I have no problem with other SFTP client

When connecting via FTP to an OpenVMS server, the "last modified" column is showing the file creation date.

This is a resurrection of client bug #790 (which was closed due to inactivity). I was not the person who filed that originally. I am the senior FTP support specialist with Novell Worldwide Support. I will base this report description on the older one, but will update it:

Novell's FTP server software allows one to access the files on ANY Novell file server in their directory tree, using this syntax: cwd server/volume/dir/subdir

And some Novell FTP servers will even let someone's home directory be in that format.

This feature is sometimes referred to at Novell as a "FTP Gateway" where one FTP server can give users access to an entire Directory Tree of servers. We also call it our "remote server" feature.

Novell FTP server is (to my knowledge) the only FTP server in the world to provide this feature. So admittedly, this effects only a subset of your user base. But when FileZilla (3.7.3) sees such a syntax (through pwd output), or when you enter a path into Filezilla's "remote site" field, such as "server1/volume1/path/" Filezilla often strips off the first '/' character. This seems to especially be a problem when using the QuickConnect button to start a session, rather than Site Manager. But I've had customers complain of it even when using Site Manager.

Because of this, anytime Filezille wants to reference the absolute path in a command, it references "/server1/..." instead of "server1/...". This difference causes the Novell FTP server to look for a local path (local to the FTP server) called "/server1/..." rather than access the separate host machine "server1". And thereby, it returns a '550 invalid path' error, or similar.

I would be happy to work closely with you to pursue this issue. Many of our common customer would benefit from having Filezilla know that (at least with Novell servers) it should preserve double-slash syntax rather than strip it off. Also, please note that not every Novell FTP server would be using this syntax. So it wouldn't be as simple as saying, "build every absolute path for Novell beginning with a double slash." Instead, it will be a matter of looking at what syntax is given (via PWD or via user input) and if it begins with "" preserve that rather than strip it to "/".

I will quote the following from the older bug as well, though I have not verified all of this:

Another FTP client, NCFtp (www.ncftp.com) had the same issue a few versions back, but has since been fixed. WS_FTP on Windows, Fetch and Transmit on Mac OSX, and the command line FTP program on any Mac/Linux/Windows system all work correctly with this functionality and do not have this issue.

That is not to say that all those clients fully understand and automatically correctly use the "" syntax. But in many cases, clients don't insist on referencing the absolute path as much as Filezilla does, so they will often "just work" where Filezilla doesn't.

Here's a log of a Filezilla FTP session to a Novell FTP server, demonstrating this:

Status: Connecting to 151.155.214.77:21... Status: Connection established, waiting for welcome message... Response: 220-Welcome to Pure-FTPd. Response: 220-You are user number 1 of 1000 allowed. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER admin Response: 331 User admin OK. Password required Command: PASS * Response: 230-User admin has group access to: admingroup Response: 230 OK. Current directory is dp-sles11sp2VOL1\sub2 Command: OPTS UTF8 ON Response: 200 OK, UTF-8 enabled Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "dp-sles11sp2/VOL1\sub2" is your current location Status: Directory listing successful Status: Connecting to 151.155.214.77:21... Status: Connection established, waiting for welcome message... Response: 220-Welcome to Pure-FTPd. Response: 220-You are user number 2 of 1000 allowed. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER admin Response: 331 User admin OK. Password required Command: PASS * Response: 230-User admin has group access to: admingroup Response: 230 OK. Current directory is dp-sles11sp2VOL1\sub2 Command: OPTS UTF8 ON Response: 200 OK, UTF-8 enabled Status: Connected Status: Starting upload of C:\Users\dpartrid\Desktop\add5.pdf Command: CWD /dp-sles11sp2/VOL1\sub2 Response: 550 Can't change directory to /dp-sles11sp2/VOL1/sub2: No such file or directory Command: CWD /dp-sles11sp2 Response: 550 Can't change directory to /dp-sles11sp2: No such file or directory Command: CWD / Response: 250 OK. Current directory is / Command: MKD dp-sles11sp2 Response: 550 Can't create directory: Permission denied Command: MKD /dp-sles11sp2/VOL1\sub2 Response: 550 Can't create directory: No such file or directory Command: CWD /dp-sles11sp2/VOL1\sub2 Response: 550 Can't change directory to /dp-sles11sp2/VOL1/sub2: No such file or directory Command: SIZE /dp-sles11sp2/VOL1\sub2/add5.pdf Response: 550 Can't check for file existence

After installing filezilla ftp my ip address changed, now there's an ip address conflict and I cannot open the Internet. What can I do to change it back? Ìve tried everything. Thank you.