Custom Query (10423 matches)

I am using 64 bit processor system and facing this problem

Status: Connecting to 50.62.160.55:21... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server Status: Waiting to retry... Status: Connecting to 50.62.160.55:21... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server

FileZilla is great of greatest. I only wish it could get greatest of greatest. I wish there was a new layout with only single layout (only remote view where folder and file are in a tree view. It'd be very much of Mac friendly.

Hi there... We've found Filezilla to be a fantastic tool, but after your recent update, one of your more helpful features, prioritization, no longer works. It appears that once files are uploaded, Filezilla only deals with one server at a time in chronological order. Highest priority files are ignored for ones that were put in the queue first. Thus, we've had a lot of low priority files consuming time and bandwidth. Please address this. It's very challenging to use FZ without this feature working. Thanks.

Status: Resolving address of ftp.augustabenelux.nl Status: Connecting to 46.44.148.131:21... Status: Connection established, waiting for welcome message... Response: 220 Titan FTP Server 10.01.1740 Ready. Command: AUTH TLS Error: Could not connect to server

Status: Waiting to retry... Status: Resolving address of ftp.augustabenelux.nl Status: Connecting to 46.44.148.131:21... Status: Connection established, waiting for welcome message... Response: 220 Titan FTP Server 10.01.1740 Ready. Command: AUTH TLS Error: Could not connect to server

==> "AUTH TLS" command is killing the login process on some FTP server when using "Quick Connect" on FileZilla. TLS should not be enforced on simple ​ftp:// login, or you should add a checkbox to activate/deactivate TLS, just next to the "Quickconnect" button. I don't know if this is a bug report or a feature request~ it is certainly a problem for inexperienced users.

==> Login works fine when: a) Using the FileZilla Site Manager and picking the "Only use plain FTP (insecure)" option b) Adding a network location within Windows c) Using Internet Explorer

I can sftp to my server using filezilla which is running SLES 11 SP2.

I have a VM running SLES 12 and it cannot sftp to it. I verified both sshd_config and they are identical and sftp is enabled.

I can use SFTP option in winscp and it works fine with SLES 12 VM guest but FileZilla sftp timed out as shown below. I guess that many people have this problem reported on web but no answer.

Every machine is behind firewall and when WinSCP using SFTP works but not FileZilla.

Status: Connecting to 192.168.142.101... Response: fzSftp started, protocol_version=2 Command: open "db2psc@192.168.142.101" 22 Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server Status: Waiting to retry... Status: Connecting to 192.168.142.101... Response: fzSftp started, protocol_version=2 Command: open "db2psc@192.168.142.101" 22

For every file that i edit and say yes to save changes then yes to upload when i try to send the next file it prompts me to send the previous file that i had edited instead of the one that i'm trying to send. I have to click no then yes once the file i want to send appears. this causes many duplicates files being sent at times. this ONLY happens to files that are edited first.

Using a HiDPI screen (3200x1800), almost everything looks great.

There is only a small issue: the icons in the toolbar are very small.

If I upgrade, I can't connect to my sites. It times out trying to give a directory listing.

I have a lot of sites on my site manager and it would be great if when you clicked the down arrow on the right of the main site manager button within the main filezilla window, that if the number of sites exceeds the window height, a mouse scroll would bring that list down, rather than having to click the down and up arrows to move up and down the list.

In these days I am moving some webapps from an old to a brand new server, fine tuning and testing the new version and also still developing the old one. Paths and folders are almost the same (LAMP platform) and the only distinguishing thing is the title bar or the tab bar with the remote IP address. So I am in a constant "panic" :) when I make an upload, always fearing if I am uploading at the wrong place.

MY WISH What I wish is just the ability to mark, preferably with a BACKGROUND COLOR for a better recognizability, both the local and remote panels for having an immediate conscience on "where" I am working on. So backgrounding, in my situation, the old server as reddish and the new one as greenish will make me work most confortably. Of course the bgcolor should be a stored property in the Site Manager.

Maybe this feature can be useful when simply working on multiple sites too.

Thanks in advance.

I have a customer who cannot view excel spreadsheets in FileZilla client. She does monthly reports in FileZilla and last month had no issue with excel. Now this month cannot view data in the spreadsheet.

let say i have file "a.txt" in server folder "A" and i have file "a.txt" in server folder "A\B" if i drag and drop file from server folder B to server folder ".." (top most), then file will be moved to folder A without confirmation.

I have switched to using ftpes with a server I connect to very often. I connect, can upload etc but all of a sudden, I see this in the logging: 09:32:01 Opdracht: PORT 192,168,188,31,252,91 09:32:01 Antwoord: 500 Illegal PORT command 09:32:01 Opdracht: PASV 09:32:01 Antwoord: 227 Entering Passive Mode (212,26,193,125,235,92). 09:32:01 Opdracht: MLSD 09:32:01 Antwoord: 150 Opening ASCII mode data connection for MLSD 09:32:01 Antwoord: 425 Unable to build data connection: Operation not permitted 09:32:01 Fout: Ontvangen van mappenlijst is mislukt

The ftp server has an IP in the 212 range so it is not local, the PORT command is something local but gets an 'Illegal PORT command' as response. Connection is then lost and I need to disconnect and reconnect to proceed.

hi, xxx version 3.9 and earlier there were no problems, but the version 3.10 xxx has never worked for me, this is the detailed error:

Estado: Resolviendo la dirección de ftp.topowar.net Estado: Conectando a xxxxxxxxxx:21... Estado: Conexión establecida, esperando el mensaje de bienvenida... Estado: Inicializando TLS... Estado: Verificando certificado... Estado: TLS connection established. Estado: Server does not support non-ASCII characters. Estado: Conectado Estado: Retrieving directory listing of "/home/topowar/public_html"... Comando: CWD /home/topowar/public_html Respuesta: 550 Can't change directory to /home/topowar/public_html: No such file or directory Comando: PWD Respuesta: 257 "/" is your current location Comando: TYPE I Respuesta: 200 TYPE is now 8-bit binary Comando: PASV Respuesta: 227 Entering Passive Mode (108,163,183,202,230,142) Comando: MLSD Error: Connection timed out after 20 seconds of inactivity Error: Error al recuperar el listado del directorio

SourceForge adds a custom installer and does not allow me to run your binaries directly.

This means I cannot recommend your software any more.

Please consider moving the whole project to GitHub.

Filezilla 3.10.3 #6672 GCC 4.8.2 Compile Error: ../../../src/engine/misc.cpp: In function ¿int GetRandomNumber(int, int)¿: ../../../src/engine/misc.cpp:276:34: error: no match for call to ¿(std::uniform_int_distribution<int>) (std::random_device)¿

return dist(std::random_device());

Patch: src/engine/misc.cpp int GetRandomNumber(int min, int max) {

wxASSERT(min <= max); if (min >= max)

return min;

/* JJS Commented out May 3, 2015

std::uniform_int_distribution<int> dist(min, max); return dist(std::random_device());

*/

/* JJS Added these two lines right from the GCC random documentation... */

std::random_device rd; std::mt19937 gen(rd());

std::uniform_int_distribution<int> dist(min, max); return dist(gen);

}

I would submit a patch, but I suspect the "real" fix is much simpler. I've been away from GCC for a while...

We are able to download but cannot upload anything

Hello, if I want to do an update of Filezilla client, there is no connection to internet. In our system we use an proxy server. We use the internet settings to set up the proxy settings. In some programs there is the possibility to set up an proxy or the program uses the proxy from internet settings, but filezilla doesn't do this. Can you give the chance to setup the proxy for updater in later versions?

Large files (>about 200Mb) get to 100% download and then after a short time commence downloading again. The resultant downloaded file is exactly twice the size of the original file. This does not seem to happen with smaller files and happens with transfer settings at both Auto and Binary. I am using Version 3.10.3

When I open Filezilla it opens on the screen of my 17" Macbook Pro in a way that does NOT allow me to use it because the top half of the opened program is stuck ABOVE the top of my display and I can't drag or move it anywhere else on my screen to use it. PLEASE SEE SCREENSHOT. I have tried to open it while using an external monitor and without an external monitor and the problem persists either way. I sent a support ticket (or maybe it was a forum post) quite a long time ago and the problem is still there and even with the latest version. I'm amazed that no one else has reported this since then. I set up the "debug" for 3 like you said but I don't see how I can access that information to give to you. Please fix because I really need to use Filezilla asap.

Thank you very much.

-Filezilla: 3.10.3 -OSX 10.9.5

When I retrieve from my server a very large file, in this case 4.42GB, filezilla reads the size wrong, ~260 MB. The download goes succesfully (I guess it doesn't stop until it reaches EOF) but I get the >100% message which is annoying since I dont know if its about to finish/ever going to.

Its not a server error becuase my android ftp client reads the size correctly.

Filing or editing a bug report, or adding a comment, take about 30 seconds to one minute. This is not usable.

According to Wikipedia the CIDR notation to block all IP addresses is "0.0.0.0/0". When I try to type in this value the application says "invalid IP address/range". Since the notes at the bottom specifically say that CIDR is supported shouldn't this be a valid value?

Hello, when I download a folder from the server it always happen that Filezille begin asking me if I want to override the files I am downloading as if they were already on my machine.

I make an example: I download the folder "Wordpress" from my website on my Desktop. Filezilla starts to download it on my Desktop. After a few download it begins asking me: "the file ... already exists, do you want to override it?"...

How can I fix it?

I recently deleted 2 bookmarks and the other bookmarks changed and had to be redone so they would work the way they did before deleting the 2 bookmarks.

After install Client 3.11.0 (64 bits) I cannot log on my local FTP server. If I disable the Antivirus(Kaspersky Endpoint Security 10.1.0.867) then I can log.

The version 3.11.0 has an bug with this language. All the program layout is showing the English language instead PT-BR.

Hi,

We have tried the new version 3.11.0 on multiple PCs and receive the same error when trying to connect to outside server. Does connect on MAC. This is the list of messages we get when trying to connect:

Status: Resolving address of ftp.suncast.com Status: Connecting to 67.36.217.197:21... Status: Connection established, waiting for welcome message... Status: Insecure server, it does not support FTP over TLS. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current folder. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (67,36,217,197,32,48). Command: MLSD Error: The data connection could not be established: ENETUNREACH - Network unreachable Response: 150 Opening BINARY mode data connection for MLSD /.

Speed limits are applied for each individual file download. So if the limit is 100KB/s and one file is being downloaded the total BW occupied by FTP downloads is 100KB/s. If two users are connected (or a single user is downloading two files) the maximum BW becomes 200KB/s.

This makes it nearly impossible to allow more than one connection while limiting total bandwidth the server is using.

Hi,

We are currently experiencing an issue with the latest version of the client (3.11.0(x64)) where it is unable to open the data connection after entering passive mode and entering MLSD.

This is however is only the case (as far as we have seen) on Windows 7 x64 Professional as the connection works as expected on Windows 8.1 x64.

We have a number of logs, one from the Windows 7 x64 machine, one from the Windows 8.1 x64 machine and one from ftptest.net.

Here is the detailed connection log from the Windows 7 x64 machine:

-- Status: Resolving address of ftp.hprhydro.com Status: Connecting to 78.129.242.145:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 4 of 50 allowed. Response: 220-Local time is now 13:34. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Command: USER hprukcom@… Response: 331 User hprukcom@… OK. Password required Command: PASS Response: 230 OK. Current restricted directory is / Command: SYST Response: 215 UNIX Type: L8 Command: FEAT Response: 211-Extensions supported: Response: EPRT Response: IDLE Response: MDTM Response: SIZE Response: MFMT Response: REST STREAM Response: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; Response: MLSD Response: AUTH TLS Response: PBSZ Response: PROT Response: TVFS Response: ESTA Response: PASV Response: EPSV Response: SPSV Response: ESTP Response: 211 End. Status: Server does not support non-ASCII characters. Command: PBSZ 0 Response: 200 PBSZ=0 Command: PROT P Response: 200 Data protection level set to "private" Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (78,129,242,145,190,72) Command: MLSD Error: The data connection could not be established: ENETUNREACH - Network unreachable Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listing --

Here is the log for the Windows 8.1 x64 machine:

-- Status: Resolving address of hprhydro.com Status: Connecting to 78.129.242.145:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 6 of 50 allowed. Response: 220-Local time is now 15:09. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Command: USER hprukcom@… Response: 331 User hprukcom@… OK. Password required Command: PASS Response: 230 OK. Current restricted directory is / Command: SYST Response: 215 UNIX Type: L8 Command: FEAT Response: 211-Extensions supported: Response: EPRT Response: IDLE Response: MDTM Response: SIZE Response: MFMT Response: REST STREAM Response: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; Response: MLSD Response: AUTH TLS Response: PBSZ Response: PROT Response: TVFS Response: ESTA Response: PASV Response: EPSV Response: SPSV Response: ESTP Response: 211 End. Status: Server does not support non-ASCII characters. Command: PBSZ 0 Response: 200 PBSZ=0 Command: PROT P Response: 200 Data protection level set to "private" Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (78,129,242,145,169,207) Command: MLSD Response: 150 Accepted data connection Response: 226-Options: -a -l Response: 226 40 matches total Status: Directory listing of "/" successful --

Additionally here is the log from 'ftptest.net':

-- Results Your server is working and assorted routers/firewalls have been correctly configured for explicit FTP over TLS as performed by this test. However there have been warnings about compatibility issues, not all users will be able to use your server. For maximum compatibility, consider resolving these warnings.

Status: Resolving address of ftp.hprhydro.com Status: Connecting to 78.129.242.145 Warning: The entered address does not resolve to an IPv6 address. Status: Connected, waiting for welcome message... Reply: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Reply: 220-You are user number 3 of 50 allowed. Reply: 220-Local time is now 13:31. Server port: 21. Reply: 220-This is a private system - No anonymous login Reply: 220-IPv6 connections are also welcome on this server. Reply: 220 You will be disconnected after 15 minutes of inactivity. Command: CLNT ​https://ftptest.net on behalf of 82.69.135.94 Reply: 530 You aren't logged in Command: AUTH TLS Reply: 234 AUTH TLS OK. Status: Performing TLS handshake... Status: TLS handshake successful, verifying certificate... Command: USER hprukcom@… Reply: 331 User hprukcom@… OK. Password required Command: PASS Reply: 230 OK. Current restricted directory is / Command: SYST Reply: 215 UNIX Type: L8 Command: FEAT Reply: 211-Extensions supported: Reply: EPRT Reply: IDLE Reply: MDTM Reply: SIZE Reply: MFMT Reply: REST STREAM Reply: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; Reply: MLSD Reply: AUTH TLS Reply: PBSZ Reply: PROT Reply: TVFS Reply: ESTA Reply: PASV Reply: EPSV Reply: SPSV Reply: ESTP Reply: 211 End. Command: PBSZ 0 Reply: 200 PBSZ=0 Command: PROT P Reply: 200 Data protection level set to "private" Command: PWD Reply: 257 "/" is your current location Status: Current path is / Command: TYPE I Reply: 200 TYPE is now 8-bit binary Command: PASV Reply: 227 Entering Passive Mode (78,129,242,145,183,129) Command: MLSD Status: Data connection established, performing TLS handshake... Reply: 150 Accepted data connection Status: TLS handshake successful, verifying certificate... Status: TLS session of transfer connection has been resumed. Reply: 226-Options: -a -l Reply: 226 40 matches total Listing: type=cdir;sizd=4096;modify=20150504160929;UNIX.mode=0755;UNIX.uid=821;UNIX.gid=99;unique=802g1ea07c3; . Listing: type=pdir;sizd=4096;modify=20150504160929;UNIX.mode=0755;UNIX.uid=821;UNIX.gid=99;unique=802g1ea07c3; .. Listing: type=file;size=22532;modify=20150416151516;UNIX.mode=0644;UNIX.uid=821;UNIX.gid=832;unique=802g1ea0001; .DS_Store Listing: type=file;size=15;modify=20150521150920;UNIX.mode=0600;UNIX.uid=821;UNIX.gid=832;unique=802g1ea07c9; .ftpquota Listing: type=file;size=41;modify=20150414130322;UNIX.mode=0644;UNIX.uid=821;UNIX.gid=832;unique=802g1ea1769; .gitignore Listing: type=file;size=3107;modify=20150419074713;UNIX.mode=0644;UNIX.uid=821;UNIX.gid=832;unique=802g1ea4b5f; .htaccess Listing: type=file;size=89;modify=20150414130322;UNIX.mode=0644;UNIX.uid=821;UNIX.gid=832;unique=802g1ea176b; .htaccess-static-site Listing: type=file;size=1655;modify=20150414130322;UNIX.mode=0644;UNIX.uid=821;UNIX.gid=832;unique=802g1ea176c; 404.php Listing: type=file;size=17816;modify=20150414130322;UNIX.mode=0644;UNIX.uid=821;UNIX.gid=832;unique=802g1ea176d; LICENSE.txt Listing: type=file;size=4310;modify=20150414130322;UNIX.mode=0644;UNIX.uid=821;UNIX.gid=832;unique=802g1ea176e; README.txt Status: Skipped display of 30 listing lines Status: Success --

As can be seen it connects fine on Win 8.1 and 'ftptest.net' however is having issues on the Windows 7 x64 machine. These issues are not present however in earlier versions of FileZilla (versions 3.2.7 and 3.9.0.6 to be precise).

The latest version of FileZilla does not allow access to my "uploads" directory on Ubuntu, this worked in all previous versions:

drwxrwxrwx 1 root root 0 Dec 31 1969 uploads

s3fs on /mnt/vol/www/uploads type fuse.s3fs (rw,nosuid,nodev,allow_other)

FileZilla displays the directory as:

"Dec 31 1969 uploads" and returns:

Error: Directory /mnt/vol/www/Dec 31 1969 uploads: no such file or directory Error: Failed to retrieve directory listing

when trying to access via the GUI.

Ubuntu Info

Distributor ID: Ubuntu Description: Ubuntu 14.04.2 LTS Release: 14.04 Codename: trusty

FileZilla Client

Version: 3.11.0

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-05-19 Compiled with: x86_64-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.4.1 SQLite: 3.8.10.1

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

We updated our filezilla clients to 3.11.0 but then could not establish a conection to FTP server. Several users were connected earlier in the day. All failed after update to 3.11.0. No change to server or firewall. Other FTP clients will work. Error message below:

Error: The data connection could not be established: ENETUNREACH - Network unreachable.

What happened to the timezone file created/uploaded time with the recent FZ version change?

I connect to a server on the west coast that is -2 hours from my CST location.

I edit/save a file locally (say 8:00pm or 20:00 hours). The uploaded/updated time is reflecting a time of 1:00pm or 13:00 hours?

WHY?

This used to work with the DEFAULT settings just A-OK under Win 7 SP1.

Now it is NOT working?!?

===from Help >> about===

FileZilla Client

Version: 3.11.0.1

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-05-22 Compiled with: x86_64-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.4.1 SQLite: 3.8.10.1

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

Na update kan ik niet meer sites openen. Krijg de volgende melding De dataverbinding kan niet tot stand worden gebracht: ENETUNREACH - Netwerk onbereikbaar

My FTP server is pure-ftpd(v1.0.31). I can see the contents of the FTP Server by using FileZilla 3.10.3, But I can not see any contents of the FTP server by using FileZilla 3.11.0.1.

In addition, if the FTP server is vsftpd(v3.0.2), FileZilla 3.11.0.1 can display the contents of the server normally.

Hi why not change from svn to git. using gerrit and gitblit plugin.

It would make reviewing code and upload code so much easer to review and for code reviewing in a good designed website.

And using gerrit 2.11 would let users upload changes without having to download and upload through ssh.

I have the following ftp account on BlueHost

name guest@… url ​sftp://ftp.arkfriends.net

When I try to login using 3.11.0.1 the ftp communication fails at the line

open "guest@…@ftp.arkfriends.net" 22

with a time out error

The interactive login also fails.

Is there a way to have FileZilla default to the Site list being focused when activating the Site Manager? I'd like to be able to start tabbing or arrowing to the site I want to open rather that having to mouse over and double click.

Using a ftp server for long time, after update to 3.11 they show all directory except one ????

Thank's for help walter

Dears,

I install the new version of Filezilla 3.11.0.1, follow my configurations: ​https://gist.github.com/anonymous/ddc5d3f886d23c4c6d51

When i tried access an determinate site, using FTP, i had a problem ENETUNREACH - Network inaccessible, follow error: ​https://gist.github.com/anonymous/e1a9a6a44628c56ea1c7

Its is a bug? What i should do to solve this problem?

Thanks a lot!

Clients running KES10 MR1 upgraded to Filezilla 3.11.0.1 and were no longer able to access FTP sites. Disabling KES seemed to fix the issue temporarily. Downgrading to FZ 3.10.2 resolved the issue.

We use your software to manage multiple login accounts for many different clients on a regular basis. By default the site dropdown list box expands off-screen beyond the windows frame panel and I cannot easily scroll to view saved connections on the lower portion of the list.

Having the dropdown be bound to the windows frame and implementing a nice scrollable option for an extensive catalog of saved connections, would gain much added value for power users such as myself. yes I know you can click on it manually and connect through where you add new connections but let's be real... who does that.

Even having the dropdown expand into multiple columns once it reaches a certain amount of list items would give me much more real estate to work with as far as usability.

There is a similar suggestion submitted 6 weeks ago (Ticket #10390).

Thank you guys so much, I love this product. please consider this enhancement I think so many people commercially could benefit from this.

Filters, historically - whether correct or not - have been used to SHOW things, not HIDE things. FZ uses them to hide things, which is not apparent.

A simple addition of text in the filter dialogs to alert users that checked items will not be shown would be very helpful.

A few days ago, I upgraded to Filezilla Client 3.11.0.1 I don't remember which version I had before. But before this featuer was working and now it does not anymore.

I can only transfer 1 file at a time, even if I change the settings for the simultaneous downloads / uploads / transfers. This is at least true, when I have already files waiting in a queue to transfer.

(I believe in my previuos Filezilla Version, there was only one setting for simultaneous transfers(?) In that version, this feature worked fine)

I use the german version.

Here is the information of my FZ-client:

FileZilla Client

Version: 3.11.0.1

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-05-22 Compiled with: x86_64-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.4.1 SQLite: 3.8.10.1

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

I wolud like install wildcard Godady Certificate on FileZilla server.But it fail

I receive a Connection attempt failed with "EACCES - Permission denied".

I have changed nothing in my setup or login parameters.

Log says:

Status: Connecting to 116.213.5.25:21... Status: Connection attempt failed with "EACCES - Permission denied". Error: Could not connect to server

in trying to set up the application, I've been locked out.

Version 3.11.0.1 Multiple remote file deletions fail after about 500 files - reports "Connection closed by server". These files on the server are all in one directory - they are approximately 50k jpg files.

I suppose this could be a "server problem", but this always worked ok in the past. Seems like this has happened for the past year. I keep updating versions, but the problem persists. Not a big deal, it just takes longer.

Command: CDUP Response: 250 CWD command successful. Command: PWD Response: 257 "/" is current directory. Status: Directory listing successful Response: 421 Timeout (120 seconds): closing control connection. Response: 421 Terminating connection. Error: Connection closed by server

Trivial patch to build on strict wxwidgets which do not allow implicit conversions.

Status: Connecting to 54.193.xxx.xxx Error: Connection timed out after 30 seconds of inactivity Error: Could not connect to server

Using Win 7 64 bit

I am unable to connect to the following server: ​sftp://ftp.menard-inc.com. After putting in the user name and password it comes up with the following errors: Error: Authentication failed. Error: Critical error Error: Could not connect to server

I also am unable to upgrade to the latest version. I have tried downloading it through the FileZilla application but it never saves it.

Home network, three computers. Desktop computer with FTP server connected to router via a wired connection. Two laptop computers with Filezilla FTP clients connected to router via wireless connections; one runs Windows XP and an older Filezilla client, while the other runs Windows 7 and has the latest Filezilla client 3.11.0.2. Everything is DHCP.

Router dynamically assigned 192.168.0.101 to the desktop machine. Both laptop Filezilla FTP clients have entries in the Site Manager to connect to host 192.168.0.101. Both worked just fine for months and months.

Following a recent power outage, router dynamically assigned 192.168.0.100 to the desktop machine with FTP server. Site Manager on the Windows XP machine was updated to point to 192.168.0.100, and it works. Site Manager on the Windows 7 machine was updated to point to 192.168.0.100, but sometimes it works and sometimes it does NOT work. When it does NOT work, the router has assigned the Windows 7 laptop 192.168.0.101 (the previous address of the desktop FTP server). When it does work, the router has assigned the Windows 7 laptop some other IP, such as 192.168.0.103 (the most recent time it worked). When it fails, the messages are "Connecting to 192.168.0.100", "Connection timed out after 20 seconds of inactivity", and "Could not connect to server". The automatic retry yields the same set of errors. Meanwhile, the FTP server on the desktop machine shows no attempt to connect from another machine on the home network. And the Windows XP machine has absolutely no trouble connecting.

Speculation: something in Filezilla "remembers" that the FTP server used to be 192.168.0.101 (even though the IP was changed in the Site Manager), so when the router assigns 192.168.0.101 to the Windows 7 laptop, Filezilla tries to connect to "itself" and fails. When the router assigns 192.168.0.103 (or 102, or 104, or 105) to the Windows 7 laptop, everything works just fine.

I suppose I could learn how to configure the router so that it forces a particular IP onto a machine and that would get around the problem, but it sure looks like there is a bug in Filezilla.

when using the Quickconnect Filezilla uses FTP as a protocol.

It would be a nice to have if you could specify explicitly (just an extra checkbox) in the Quickconnect bar that sFTP needs to be used.

We have a lot of external users (not very IT savy) and I always recommend them to use Filezilla but they also always use the Quickconnect option (rather than the site manager). Our server does not allow FTP connection at all...

I am attempted to upload my web files via Filezilla, and the upload stops at the same place every time (with 2929 files left in the queue), and then shortly after (about 90 seconds later) it gets disconnected from the server. Help in this would be super appreciated! Can post files/screen caps if needed. Thank yoU!

Export xml in Windows 7 and Imort in Ubuntu 14 results encoding violation

... following is LAST working version:

FileZilla Client
----------------

Version:          3.10.3

Build information:
  Compiled for:   x86_64-unknown-linux-gnu
  Compiled on:    x86_64-unknown-linux-gnu
  Build date:     2015-03-29
  Compiled with:  gcc (Debian 4.7.2-5) 4.7.2
  Compiler flags: -g -O2 -Wall -g -std=gnu++11

Linked against:
  wxWidgets:      3.0.3
  GnuTLS:         3.3.13
  SQLite:         3.8.8.3

Operating system:
  Name:           Linux 3.10.0-229.4.2.el7.x86_64 x86_64
  Version:        3.10

next version is no longer working (won't even launch):

[alexus@wcmisdlin02 bin]$ ./filezilla 
./filezilla: /lib64/libstdc++.so.6: version `CXXABI_1.3.8' not found (required by ./filezilla)
./filezilla: /lib64/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by ./filezilla)
[alexus@wcmisdlin02 bin]$

FileZilla Server Interface Not Remembering Column Size After Relaunch. It Is Very Problematic.

Hi, I am using version 3.11.02. With this recent set of updates, the time stamp that is posted when we post the file is wrong.

For example: I have a file that I posted on 06/18/15 at 2:11 pm central time zone and it says it was posted at 9:11 AM

Thanks, Cheryl

I use filezilla 3.11.0.2 to connect to two hosts in my university. I use putty too. Putty connects to both but filezilla can only connect to host 1 and when I want to connect to host 2, it automatically tries to connect host 1. Can you help me?

Version 3.10.x functions properly. Version 3.11.x does not function properly.

Hello

we are a web hosting company and we ve been having a lot of clients who are still using WWW when they try to reach a FTP conection and as a result they get a error conection. I dont know if this is a problem that is just happening with us because sometimes they think the problem is on our side.

So as a feature request we would like to know if there is a chance to add a validation or a pop-up window to alert the client that is using a wrong name server because of the WWW.

Thank you and we hope you can make this possible.

I am showing an incorrect time stamp on the remote server. The remote server shows the correct time as does my laptop. A report was processed at 6:30 pm which only takes a few moments to process and the time stamp shows a time of 2:30 pm.

Have not used my Filezilla password for over seven years, and now I have forgotten it.

Please can you let me have another password for my funniest-videos.co.uk site since I need to take down some 'rude' content at the request of Google

Sorry for any inconvenience.

David Fosbrook

Just installed 3.12.0-rc1 and in the Welcome dialog, all the links point to, eg: ​https://welcome2.filezilla-project.org/welcome?type=client&category=support_more&version=3.12.0-rc1

although the host resolves, there is no such page, but this can be fixed by changing welcome2.filezilla... to welcome.filezilla...

когда работаешь по ФТП через файлзила на Виндовс8 то виндовс превращает код или некоторые русские буквы в кракозябры а на 7 и ХР все было нормально кто нибудь знает как решить эту проблему? звонил в тех-поддержку виндовс но они отказались помочь дескать это стороннее программное обеспечение(FileZilla) и мы за него не отвечаем

It would be nice to have back and forward navigation buttons/icons. It would simplify working with multiple folder locations.

ASSERT INFO: buildinfo.cpp(118): assert "*version >= '0' && *version <= '9'" failed in ConvertToVersionNumber().

BACKTRACE: [1] wxNavigationEnabled<wxWindow>::AcceptsFocusRecursively() const [2] wxObjectList::~wxObjectList() [3] wxStringClientData::~wxStringClientData() [4] wxStringClientData::~wxStringClientData() [5] wxFileDataObjectBase::~wxFileDataObjectBase() [6] wxAnyButton::~wxAnyButton() [7] wxEntry(int&, wchar_t) [8] libc_start_main

Upon renaming a local file, the FileZilla program becomes unresponsive and has to be killed/restarted. The renaming happens almost immediately but the application is rendered unusable. FileZilla Client

Version: 3.9.0.5

Build information:

Compiled for: x86_64-suse-linux-gnu Compiled on: x86_64-suse-linux-gnu Build date: Compiled with: gcc (SUSE Linux) 4.8.3 20140627 [gcc-4_8-branch revision 212064] Compiler flags: -fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -g -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.1 GnuTLS: 3.2.18 SQLite: 3.8.6

Operating system:

Name: Linux 3.16.7-21-desktop x86_64 Version: 3.16

To prevent authorized update it is important that when new new update is installed the build number and/or version number must be updated.

Please see this is not the case with the update on filezilla version 3.12.0.2

FZ currently allows users to define the max simultaneous transfers (1-10) as well as concurrent downloads/uploads. Please add the ability to define concurrent download/uploads on server-basis. The goal is to have 1 download or upload running per server I have in my queue.

Let's say I have 100 files queued to download across 3 different servers. The expected behavior is to have 3 downloads running simultaneously with 1 from each server running. Currently, a global setting of 3 doesn't allow this.

I can't open the server manager under Archlinux with LXQT. Here is what is reported:

ASSERT INFO: buildinfo.cpp(118): assert "*version >= '0' && *version <= '9'" failed in ConvertToVersionNumber().

BACKTRACE: [1] wxNavigationEnabled<wxWindow>::AcceptsFocusFromKeyboard() const [2] wxString wxString::Format<wxString, wxString>(wxFormatString const&, wxString, wxString) [3] wxString wxString::Format<wxString, wxString>(wxFormatString const&, wxString, wxString) [4] wxString wxString::Format<wxString, wxString>(wxFormatString const&, wxString, wxString) [5] wxNavigationEnabled<wxListCtrlBase>::AcceptsFocusRecursively() const [6] wxAppConsoleBase::CallEventHandler(wxEvtHandler*, wxEventFunctor&, wxEvent&) const [7] wxEvtHandler::ProcessEventIfMatchesId(wxEventTableEntryBase const&, wxEvtHandler*, wxEvent&) [8] wxEventHashTable::HandleEvent(wxEvent&, wxEvtHandler*) [9] wxEvtHandler::TryHereOnly(wxEvent&) [10] wxEvtHandler::ProcessEventLocally(wxEvent&) [11] wxEvtHandler::ProcessEvent(wxEvent&) [12] wxWindowBase::TryAfter(wxEvent&) [13] wxEvtHandler::SafelyProcessEvent(wxEvent&) [14] wxToolBarBase::OnLeftClick(int, bool) [15] g_signal_emit_valist [16] g_signal_emit_by_name [17] g_signal_emit_valist [18] g_signal_emit [19] g_closure_invoke [20] g_signal_emit_valist [21] g_signal_emit [22] g_closure_invoke [23] g_signal_emit_valist [24] g_signal_emit [25] gtk_propagate_event [26] gtk_main_do_event [27] g_main_context_dispatch [28] g_main_loop_run [29] gtk_main [30] wxGUIEventLoop::DoRun() [31] wxEventLoopBase::Run() [32] wxAppConsoleBase::MainLoop() [33] wxEntry(int&, wchar_t) [34] libc_start_main

here is the program info: FileZilla Client

Version: 3.12.0.2

Build information:

Compiled for: x86_64-unknown-linux-gnu Compiled on: x86_64-unknown-linux-gnu Build date: 2015-07-11 Compiled with: gcc (GCC) 5.1.0 Compiler flags: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong --param=ssp-buffer-size=4 -Wall -g -std=gnu++11

Linked against:

wxWidgets: 3.0.2 GnuTLS: 3.4.2 SQLite: 3.8.10.2

Operating system:

Name: Linux 4.1.2-2-ARCH x86_64 Version: 4.1 CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx aes pclmulqdq Settings dir: /home/hannes/.config/filezilla/

Hi I have just updated several pages on my site today and am just seeing a lot of code when I check the site online. Here is an example: vti_encoding:SR|utf8-nl vti_author:SR|Mary Dread vti_timecreated:TR|17 Sep 2006 13:16:32 -0000 vti_timelastmodified:TR|20 Jul 2015 14:19:44 -0000 vti_title:SR|Photos Index vti_extenderversion:SR|12.0.0.0 This has never happened before so please help as it is important that some of the pages are available.

Running FileZilla 3.12.0.2, Client is Windows 7 x64. When we attempt to log in with a valid credentials, we always get the following log. We can connect with other FTP client software, including Core FTP and Windows command-line FTP with no problems. There is a timeout delay after the message it is trying to get a directory listing of the start directory ("/array1").

Status: Resolving address of ftp.internal.inceptra.com Status: Connecting to <server-ip-address>:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing of "/array1"... Status: Server sent passive reply with unroutable address. Using server address instead. Command: MLSD Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listing Status: Disconnected from server Status: Resolving address of <our-ftp-hostname> Status: Connecting to <server-ip-address>:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing of "/array1"... Status: Server sent passive reply with unroutable address. Using server address instead. Command: MLSD Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listing

The client should have the option of inheriting local permission instead of preserving remote permissions on files downloaded from remote servers.

I am not able to connect thru FileZilla to my website. Below is the complete log of the transmission. Status: Connecting to 97.74.215.35:21... Status: Connection established, waiting for welcome message... Status: Insecure server, it does not support FTP over TLS. Command: USER elliottsgirl55 Response: 331 Password required for elliottsgirl55. Command: PASS Response: 530 User elliottsgirl55 cannot log in. Error: Critical error: Could not connect to server

The password has to the website has been changed several times & continues to create the same error.

Here's the error log. It's very brief. Not even sure if it's a FileZilla issue or not.

Status: Resolving address of miggycraft.cf Status: Connecting to 31.170.166.171:21... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of miggycraft.cf Status: Connecting to 31.170.166.171:21... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server

It was working completely fine yesterday and I haven't done anything. Is it the host site I'm using that's the problem?

I found that Filezilla prompts me to reenter the password when I download a file. This seems only seems to occur when "Do Not Save Password" is checked, and I start Filezilla from the command line.

This seems to be similar to this issue, except that it triggers from the command line: ​https://forum.filezilla-project.org/viewtopic.php?t=36185

I searched for a corresponding bug report, but I couldn't find it.

Here is my procedure:

1. Open Filezilla and enable "Do Not Save Password" (Edit->Settings, Interface)
2. Close Filezilla
3. Open a connection to a host from the command line. The syntax I use is: %path-to-application% ​sftp://%username%:%password%@%server%:%port%
4. Right-click on a file on the target host, and select Download. The file is downloaded without a password prompt
5. Download the same file by dragging the file from the right window to the left. Filezilla promts the user for a password.

I am using Filezilla 3.12.0.2, on Windows 7 (build 7601, Service Pack 1), 64-bit edition

I tried to enable debugging, but I did not find any useful output.

hello,

I successfully installed my XAMPP. if im going to login to FTP using FileZilla with a Host: localIP i can login. but if im going to use publicIP i will get Critical error: Could not connect to server

I copy files from FTP to the absolutely NEW directory... ​http://joxi.ru/12MpYeDhNvV9mJ.jpg File already exist?? WAT?

Filezilla server 0.9.48 beta was installed on Windows xp and Windows 7. Multiple users were defined. The server settings return to blank after a reboot inwin7 but are retained in windows xp. After every reboot all acounts have to be re-entered. Before reboot, the accounts are listed OK. After reboot, the accounts are all gone no groups users or folders are shown. Attempted to add system permissions to folders used by the filzilla xml file. Seems to be a sandbox situation, but unable to find any settings to mitigate. Migrate the settings file(s) location to users\$user$\appdata\filezilla in windows 7 and perhaps it will retain settings.

Error when you open the site and the program itself. See. Screen file:

/include/wx/string.h(1536): assert "!empty()" failed in Last(): wxString: index out of bounds

FileZilla Client

Version: 3.12.0.2

Build information:

Compiled for: i386-portbld-freebsd10.1 Compiled on: i386-portbld-freebsd10.1 Build date: 2015-07-23 Compiled with: FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 Compiler flags: -O2 -pipe -fstack-protector -fno-strict-aliasing -Wall -g -std=gnu++11

Linked against:

wxWidgets: 3.0.2 GnuTLS: 3.3.16 SQLite: 3.8.10.2

Operating system:

Name: FileZilla Client

Version: 3.12.0.2

Build information:

Compiled for: i386-portbld-freebsd10.1 Compiled on: i386-portbld-freebsd10.1 Build date: 2015-07-23 Compiled with: FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 Compiler flags: -O2 -pipe -fstack-protector -fno-strict-aliasing -Wall -g -std=gnu++11

Linked against:

wxWidgets: 3.0.2 GnuTLS: 3.3.16 SQLite: 3.8.10.2

Operating system:

Name: FreeBSD 10.2-RC1-p1 i386 Version: 10.2 CPU features: sse sse2 sse3 Settings dir: /home/elimelech/.config/filezilla/

Version: 10.2 CPU features: sse sse2 sse3 Settings dir: /home/elimelech/.config/filezilla/

On starting the program, the "Check for Updates" dialog box appears asking to update to "3.12.0.2" I click "Install new version" and click yes on the Windows User Account Control dialog to allow the program to install.

The updates install, the program restarts and the "Check for Updates" dialog box does not appear. The version listed is 3.12.0.2 in the About section. The check for updates menu item gives me the dialog box "You are using the latest version of FileZilla."

I select File->Exit to exit. I restart the program and the "Check for Updates" dialog box appears asking to update to "3.12.0.2". I close the dialog and check the about section.

The version is now listed as "3.11.0" and choosing to install the new version restarts the process.

Other information: I have tried manually uninstalling, restarting the computer, downloading a new copy and reinstalling the software with the same result. When opening the program the version listed does not advance past "3.11.0"

I have noticed that the updates will accumulate in the dialog box until I click "Install new version" but after the updates install and I close the program, reopening it will show only the most recent update as still available in the "Check for Updates" dialog.

I did install FileZilla Server 0_9_51 at one point on the same computer but it has since been uninstalled.

When I select a folder in the directory tree and then delete this folder, FileZilla tries to re-list the contents of this folder. This, of course, fails since the folder has been deleted. Previous versions of FileZilla listed the contents of the parent folder in that situation. (I first select the folder to find out if it is empty)

This has also happened on earlier versions.

Filezilla gives the message "Failed to retrieve directory listing" during connect. I can get around this by accessing my Cable Modem's Administrator function and changing my Firewall setting to "Minimum". I have to keep it at this level during the entire FileZilla session, through and including Disconnect.

Naturally, I do not appreciate having to leave myself vulnerable, even for a relatively short window. I'd prefer to keep the higher level set at all times.

The log, in its entirety, [minus the particulars of my site] reads:

Status:	Resolving address of [XXXXXXXXXX.XXX]
Status:	Connecting to [YY.YY.YY.YY]:21...
Status:	Connection established, waiting for welcome message...
Status:	Initializing TLS...
Status:	Verifying certificate...
Status:	TLS connection established.
Status:	Connected
Status:	Retrieving directory listing...
Command:	PWD
Response:	257 "/" is your current location
Command:	TYPE I
Response:	200 TYPE is now 8-bit binary
Command:	PASV
Response:	227 Entering Passive Mode ([YY,YY,YY,YY],197,52)
Command:	MLSD
Error:	Connection timed out after 20 seconds of inactivity
Error:	Failed to retrieve directory listing
Status:	Disconnected from server

... and it repeats once, except the second time, one line is different:

Command:	PASV
Response:	227 Entering Passive Mode ([YY,YY,YY,YY],197,46)

This is the only web-site to which I connect.

I do not know if this is a function of FileZilla in general, of my site in particular, or of my Site Manager configuration.

As to the latter, I do not have a Port specified. I don't know if the ":21..." refers to the default port, or what the ",197,52" or "197,46" means.

I would like to know if: (a) Specifying a particular Port number will clear up this problem. (And, if so, what port number?) (b) This is a "Bug" or a Feature", and (c) If the former, can it be fixed?

Thank you.

I've been frustrated for a while that I can't run Filezilla Client from the "Run..." without a full path.

Apparently this is achieved with entries in

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths

This would be an installer update, I presume.

Some relevant documentation:

​http://www.askvg.com/how-to-open-any-program-by-typing-its-name-in-run-dialog-box-in-windows/

​https://msdn.microsoft.com/en-us/library/windows/desktop/ee872121%28v=vs.85%29.aspx

Hello,

When you have at least 2 tabs, there is a little cross on the right side of the tab, presumably to close the tab. But when you click on it, it doesn't work. The tab can be right clicked to be closed.

Steps to reproduce : Open two tabs Click the cross to close a tab Expected : the tab closes Bug : nothing happens.

Gif of it in action: ​https://i.imgur.com/7Z6JVI7.gif

This bug is present in Filezilla client version 3.12.0.2 on GNU/Linux plateform (Archlinux). I can't reproduce it on Mac OS X.

This bug was first reported two years ago (​https://trac.filezilla-project.org/ticket/8889) with Awesome WM, now I'm using BSPWM, and the bug is still here.

Regards, ~k

When we transfert files and some files are existing in the target, we can choise to overwrite or not if the source/target is more recent. But in the log window, we only know if the transfert is ok/ko, but we don't know what it did: replace or not ?

I suggest to add a column like :

• "copy" if the target is missing
• "replace" if the target is replaced
• "keep" if the file exist and it is not replaced

Thanks, Ruben

In SiliconMarketing website Hosting IP: 118.67.244.18:21 we are unable to delete the Bin directories and also not able to upload new one. Response: 550 /bin_nouse/App_Web_gnrrvhdc.dll: Permission denied. Command: DELE App_Web_0hmfjfjd.dll Response: 550 /bin_nouse/App_Web_0hmfjfjd.dll: Permission denied. Command: DELE App_Licenses.dll Response: 550 /bin_nouse/App_Licenses.dll: Permission denied. Command: CWD / Response: 250 Directory changed to / Command: PWD Response: 257 "/" is current directory. Command: RMD bin_nouse Response: 550 /bin_nouse: Cannot delete directory. Status: Retrieving directory listing of "/"... Status: Directory listing of "/" successful Status: Retrieving directory listing of "/bin"... Status: Directory listing of "/bin" successful Status: Deleting 10 files from "/bin" Command: DELE C1.Web.UI.Controls.3.xml Response: 250 DELE command successful. Command: DELE C1.Web.UI.Controls.3.dll Response: 550 /bin/C1.Web.UI.Controls.3.dll: Permission denied. Command: DELE C1.Web.UI.3.dll Response: 550 /bin/C1.Web.UI.3.dll: Permission denied. Command: DELE App_Web_u5crbnjm.dll Response: 550 /bin/App_Web_u5crbnjm.dll: Permission denied. Command: DELE App_Web_qxfqrmxk.dll Response: 550 /bin/App_Web_qxfqrmxk.dll: Permission denied. Command: DELE App_Web_li5d1wds.dll Response: 550 /bin/App_Web_li5d1wds.dll: Permission denied. Command: DELE App_Web_e0gqgzvi.dll Response: 550 /bin/App_Web_e0gqgzvi.dll: Permission denied. Command: DELE App_Web_coj1jirv.dll Response: 550 /bin/App_Web_coj1jirv.dll: Permission denied. Command: DELE App_Web_00hzknjy.dll Response: 550 /bin/App_Web_00hzknjy.dll: Permission denied. Command: DELE App_Licenses.dll Response: 550 /bin/App_Licenses.dll: Permission denied. Command: CWD / Response: 250 Directory changed to / Command: RMD bin Response: 550 /bin: Cannot delete directory. Status: Retrieving directory listing of "/"... Status: Directory listing of "/" successful Status: Retrieving directory listing of "/bin"... Status: Directory listing of "/bin" successful Status: Deleting 9 files from "/bin" Command: DELE C1.Web.UI.Controls.3.dll Response: 550 /bin/C1.Web.UI.Controls.3.dll: Permission denied. Command: DELE C1.Web.UI.3.dll Response: 550 /bin/C1.Web.UI.3.dll: Permission denied. Command: DELE App_Web_u5crbnjm.dll Response: 550 /bin/App_Web_u5crbnjm.dll: Permission denied. Command: DELE App_Web_qxfqrmxk.dll Response: 550 /bin/App_Web_qxfqrmxk.dll: Permission denied. Command: DELE App_Web_li5d1wds.dll Response: 550 /bin/App_Web_li5d1wds.dll: Permission denied. Command: DELE App_Web_e0gqgzvi.dll Response: 550 /bin/App_Web_e0gqgzvi.dll: Permission denied. Command: DELE App_Web_coj1jirv.dll Response: 550 /bin/App_Web_coj1jirv.dll: Permission denied. Command: DELE App_Web_00hzknjy.dll Response: 550 /bin/App_Web_00hzknjy.dll: Permission denied. Command: DELE App_Licenses.dll Response: 550 /bin/App_Licenses.dll: Permission denied. Command: CWD / Response: 250 Directory changed to / Command: RMD bin Response: 550 /bin: Cannot delete directory. Status: Retrieving directory listing of "/"... Status: Directory listing of "/" successful Status: Retrieving directory listing of "/"... Status: Directory listing of "/" successful Status: Retrieving directory listing of "/"... Status: Directory listing of "/" successful Status: Retrieving directory listing of "/bin"... Status: Directory listing of "/bin" successful Status: Deleting 9 files from "/bin" Command: DELE C1.Web.UI.Controls.3.dll Response: 550 /bin/C1.Web.UI.Controls.3.dll: Permission denied. Command: DELE C1.Web.UI.3.dll Response: 550 /bin/C1.Web.UI.3.dll: Permission denied. Command: DELE App_Web_u5crbnjm.dll Response: 550 /bin/App_Web_u5crbnjm.dll: Permission denied. Command: DELE App_Web_qxfqrmxk.dll Response: 550 /bin/App_Web_qxfqrmxk.dll: Permission denied. Command: DELE App_Web_li5d1wds.dll Response: 550 /bin/App_Web_li5d1wds.dll: Permission denied. Command: DELE App_Web_e0gqgzvi.dll Response: 550 /bin/App_Web_e0gqgzvi.dll: Permission denied. Command: DELE App_Web_coj1jirv.dll Response: 550 /bin/App_Web_coj1jirv.dll: Permission denied. Command: DELE App_Web_00hzknjy.dll Response: 550 /bin/App_Web_00hzknjy.dll: Permission denied. Command: DELE App_Licenses.dll Response: 550 /bin/App_Licenses.dll: Permission denied. Command: CWD / Response: 250 Directory changed to / Command: RMD bin Response: 550 /bin: Cannot delete directory.

Except this we can able to upload everything else.

Plz help me.How to solve this..

I have switched to Windows 10, now I can not drag & drop between the remote directory to local directory for folders and files.

There is no error and no warning, nothing appens.

The only way to download a folder is to right clic on it and download. I have tried with 3.12.0.2, 3.13.0-RC1 and the nightly 2015-08-08.

Within the site manager, cmd+v triggers the bookmarks shortcut (cmd+b) instead of pasting.

I opened the Sites Manager.

The window is ridiculously tall, as you can see from the screenshot. It even exceeds the height of the screen, though fortunately the buttons are accessible (but what if my screen had been smaller?!?)

What is much worse, the window CANNOT BE RESIZED.

I tried to resize in the standard way as you do in Ubuntu. The resizing cursor does appear when you hover the mouse over the upper borders or corners of the window (the lower ones are outside the screen; note that if you were on mac you could only resize the window from the bottom), but clicking and dragging doesn't resize the window as expected.

This issue has appeared after I upgraded from Ubuntu 14.04 to 15.04 (through 14.10). So this is a regression somewhere between whatever version was distributed with 14.04 and whatever version is distributed with 3.9.0.5

I am able to login to a lot of servers with FZ later the version 3.9.0.6, but one server refuses access. I have tried all versions but it is only that old version that is able to login to that server. I do not own the server. Log files attached.

filezilla unable to load Resolving address of ftp.itron-hosting.com Status: Connection attempt failed with "EAI_NONAME - Neither nodename nor servname provided, or not known

Getting this error ever since the last update and can not connect. Others in my office who did not do the latest update are able to connect just fine.

Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (98,139,135,37,210,236) Command: MLSD Error: The data connection could not be established: ENETUNREACH - Network unreachable Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listing

I am managing a joomla website.

A Template *.js file needed to be edited.

I selected the file, right clicked, selected "View/Edit".

Instead of editing the file it was downloaded and then Run.

Windows 10. Filezilla 3.13.0.

(I then downloaded the file and could edit it OK with a right click and edit using Windows 10 File Explorer)

Hello! ​OpenSSH 6.8 released a new default fingerprint type of SHA256 (e.g. SHA256:mVPwvezndPv/ARoIadVY98vAC0g+P/5633yTC4d/wXE).

Could FileZilla please support these fingerprints as well?

Build error on Ubuntu with below line:

fzputtygen_interface.cpp:2:34: fatal error: fzputtygen_interface.h: No such file or directory

fzputtygen_interface.h does not exist in source tarball while fzputtygen_interface.cpp file contains line: #include "fzputtygen_interface.h"

Build log: ​https://launchpadlibrarian.net/215169368/buildlog_ubuntu-wily-amd64.filezilla_3.13.0-2~2wily_BUILDING.txt.gz

When I open FileZilla, I am prompted to install version 3.13.0. I install it. But each time I launch Filezilla for a new use, I'm prompted to install the version I have already installed.

Here's the message:

3.13.0 (2015-08-15)

+ Display home directory instead of root directory if the last used directory does not exist + Larger initial size of main window if there is no stored size + Slightly increased size of page selection box in settings dialog

• Fix assertion in directory listing parser
• Fix drag&drop of remote files which broke in 3.13.0-rc1

3.13.0-rc2 (2015-08-10)

• Updated SFTP components from PuTTY
• Official binaries now link against GnuTLS 3.4.4
• Official binaries now link against SQLite 3.8.11.1

3.13.0-rc1 (2015-08-06)

+ For SFTP servers the private key file to use can now be specified in the Site Manager + The contents of each queue tab can now be exported through the context menu + MSW: The installer now registers the App Path so that FileZilla is recognized in the Win+R dialog + FileZilla now uses pugixml instead of TinyXML to parse and create XML files + Several performance improvements + Code cleanup and modernization, building FileZilla now requires a C++14 compiler

• Fixed an assert loading sitemanager.xml created by an old version
• If password saving is disabled, specifying a password on the command-line no longer leads to extraneous password prompts when transferring files
• If deleting remote directories via the directory tree, navigate out of the directory tree that is to be deleted