Custom Query (10423 matches)

FileZilla 3.3.0.1 has been working fine until today. The software update was from Apple to update Airport Utility. But I don't think that would cause FileZilla not to launch.

Attached is the crash report sent to Apple and also the FileZilla Diagnostic report.

My System: MacPro 3,1 (Early 2008) Processors: 2 x 2.8GHz 8 core Intel Xeon Kernel Mode: 64-bit Memory: 18GB Disks: 1 x 320GB, 2 x 1TB, 1 x 2TB Optical Drive: Apple SuperDrive WebCam: Logitech Pro-9000 Modem: Apple External Network: 1GB Ethernet Network drive: 1 x Apple 2TB Time Capsule

Thank you, Don Leckie

I'm using FileZilla Server 0.9.33 downloaded on 12/7/2009 (although the server interface reports it as 0.9.33 BETA) on Windows 7 x64 Ultimate and FileZilla client 3.3.0.1 on Windows Vista x64 Home Premium.

I was trying to access UNC's defined to the server, but I couldn't get it to work as defined in the forum sticky, and there was no response on the forums. So I thought about it, and decided a shortcut in the Home directory might work. And it did.

However, the shortcut appears in the client as both a folder and a .lnk file. The folder works as expected. The .lnk file can be downloaded. I also tested using Firefox 3.5.5 as the client, and both the folder and the .lnk file appear there, too. So I suspect this is a problem with the server.

I suggest that shortcuts appear only as the objects they link to. In my case, I should only see the folder in the client. In the case of a linked file, only the destination file should be seen.

Perhaps this should be an option in the server settings. But at a minimum, the .lnk itself should not be seen in the client, only the destination.

Edit->Settings->File exist action

Set the value of Downloads to "Overwrite file if size differs or source file is newer" behave incorrectly as "Ask for action". It worked correctly if set to "Overwrite file source file is newer".

Is it possible to have an option to connect only with a SSL connection that can be "Authentification SSL" or "Implicit SSL" ?

Because many sites only can translate files less than 30M, so filezilla client need to compress and split file when send files to server, and do the contrary Activities when get files from server.

FileZilla Client 3.3.0.1 issuea a STOR doesn't wait for the FTP server to send a reply (assumes positive) and starts sending the selected file immediately after the STOR command. Wireshark dump available, if needed. This patch should fix this issue, but I'm warning: I didn't compile FileZilla after patching (too old system), so I don't know if it compiles (should) or works. Even if it doesn't, I hope it will "push" you in the right direction. Check if this could fix the "file uploaded, but zero length" series of bugs.

My Setup: FileZilla Client 3.3.0.1 on Windows 7 and Windows Server 2008 R2, Apple's FTP sharing server on MacOSX 10.6.2, working in gigabit local area network.

After I updated FileZilla to the current version on Win7, I successfully transfered 5 files to the FTP server. It was always the same file, I just modified it multiple times between the uploads. So after uploading this file 5 times, I tried to upload it another time. FileZilla tried to start the download, but instantly after starting, the network connection gets broken - I don't have any connection to my network now. I can use Windows' "troubleshoot problems" feature from the network icon's context menu, which will say the following:

Problems found The connection between your access point, router, or dable modem and the Internet is broken -- Detected The default gateway is not available -- Fixed

After that, the network connection works fine. But as soon as I start a transfer with FileZilla, it breaks every time. This is permanent, restarting FileZilla or rebooting Windows does not help.

FTP transfers with the Windows Explorer work fine.

I also tested this on Windows Server 2008 R2. The issue is quite the same except that instead of breaking the network connection, FileZilla instantly freezes the whole OS when uploading the file for the 6th time and afterwards. There isn't even a bluescreen, and no way to recover except for the reset button on my PC. The server is installed on the same hardware as 7. I had Windows XP installed on it before, and there were no issues with FileZilla.

I had an older version of FileZilla (can't remember which one) installed on Windows 7 before updating to 3.3.0.1, it showed the same behaviour. After updating, it did 5 successful transfers and then re-entered this permanent error state.

It might be a driver problem, but I see no reason why the transfer would succeed the first 5 times and fail afterwards - there has to be some FileZilla-specific problem behind it. Also, there are no problems with the Windows Explorer FTP feature.

It would be useful if Filezilla Client could show a diff of the remote file against the local version, launched via the context (right-click) menu.

The differences between files could be shown either using basic diff command output, or perhaps make the application configurable so that users can select WinMerge or Kompare, for example, depending on preferences and platform.

I had some folders in which were uploaded some hidden linux files *.*~ (with a trailing tilde). I was unable to view these files and delete folders that contained them. (I solved using winscp who recognize them)

Hello,

I am creating hosts in the Site Manager portion of Filezilla but the port numbers for some sites that do not use the default port 21 are not saving. I am having to connect to some SSL/TLS connections and they require port 990. After I manually put in port 990 in Site Manager for a site that requires an SSL/TLS connection I am able to connect but if I restart Filezilla the port number is lost and it tries to revert back to using port 21.

The verion of Filezilla I am running is 3.3.0.1. Any help is greatly appreciated.

Regards, Troy

Sometimes (from time to time, maybe this depend on mix utf8 and iso-8859-2 coding and server configuration) I have a problem with download files contains specific characters such as ą,ę,ł,ż,ź,ć,ń (from polish language). These names of files are displayed correctly but transfer ends in failure.

The seconds portion of time/datestamp always displays "00" on all files on our AIX servers. I am using filezilla client version 3.3.01. The date and hour:min are all correct only the seconds are affected. I just noticed this but am sure that this was not the case in the past.

Hello.

When I connect to my FTP, or what its called, I get this message at the end: Error: Failed to retrieve directory listing

How can I fix that? I really want to transfer files from my FTP to my PC.

The Filezilla server version I used is 0.9.29 Beta.In the General settings, if I modified the Number of Threads to 1(I have 2 processor in my Windows2008), So there shouldn't be 3 or more FTP sessions, but there really be 3 sessions run in the status pannel, after the third session created, it will take over one of the session which is running before, the session was discard when the task isn't over. In my opinion, the third session should wait till the prior is over.

Hi,

Have you tried cppcheck? ​http://sourceforge.net/projects/cppcheck/

FileZilla Server\source\interface\misc\md5.cpp:252]: (error) Memory leak: s FileZilla Server\source\interface\misc\md5.cpp:269]: (error) Memory leak: s FileZilla Server\source\interface\misc\MarkupSTL.cpp:136]: (error) Mismatching allocation and deallocation: pBuffer FileZilla Server\source\misc\MarkupSTL.cpp:145]: (error) Mismatching allocation and deallocation: pBuffer FileZilla Server\source\misc\md5.cpp:261]: (error) Memory leak: s FileZilla Server\source\misc\md5.cpp:278]: (error) Memory leak: s

Good luck

Our banking software uses a fixed set of commands to check and then send information to an FTP server. While testing Filezilla, all the commands sent work up to the STAT command. The jobs fail because Filezilla sends back an error message when receiving STAT. I would like to know if it is possible to have Filezilla recognize and respond to the STAT command.

There are other commands issued after that as well, which are PORT, STOR FILES, and QUIT. I'd like to know if they work with Filezilla as well.

Server ftp in UTF8 mode. The problem is that I have many files with the same foreign char in name (as ą or ł or ć or ż, etc.) but only a few of them (of files) are not able to download. So when I take such kind of file from "failed transfers" and rename it (get rid of the char from name) and restore back the name (again rename and write the missing char) I'm able to download this file.

This has been the case for several versions now. I have some subdirectories in my web account that begin with a period/dot ".". I can enter the directories manually in the address bar of FZ, but they otherwise will not show in the server file list.

In the latest FileZilla (I currently have beta, but stable should be the same anyway), I would like the tabs to be re-arrangeable. Also, maybe extend this function to have the tabs be able to move to another filezilla window.

Due to various reasons, sometimes I want the bandwidth limits in place and sometimes I don't. It would be nice if I could toggle the bandwidth limits using a button on the toolbar.

I have found it to be annoying that it asks me what I want to do when trying to connect to another server when I'm connected to a server already. I have no desire to use the "tab" feature and would like to always abort my current connection and connect to the new server. Consider this a request for a legacy option/behavior.

It would be nice to have a menu item when you right click that allows you to add a new bookmark for this location or add the remote/local path to the advanced tab.

Just a little step I thought would be handy when using Filezilla.

Thanks

I see two tickets concerning Filezilla and Comcast have been closed with the comment that it must be a server issue. I can log on with version 2.1.13a which I've kept around specifically for this purpose, however, none of the 3 builds will.

2.2.13a: Status: Connecting to upload.comcast.net ... Status: Connected with upload.comcast.net. Waiting for welcome message... Response: 220 FTP server (Version 5.339PWS/AI) ready. Command: USER jonljacobi Response: 331 Password required for jonljacobi. Command: PASS Response: 230 User jonljacobi logged in. Command: FEAT Response: 500 'FEAT': command not understood. Command: SYST Response: 215 UNIX Type: L8 Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current directory. Command: PORT 192,168,1,101,6,86 Response: 200 PORT command successful. Command: TYPE A Response: 200 Type set to A. Command: LIST Response: 150 Opening ASCII mode data connection for /bin/ls. Response: 226 Transfer complete. Status: Directory listing successful

3.3.0.1: Status: Resolving address of upload.comcast.net Status: Connecting to 216.87.188.9:21... Status: Connection established, waiting for welcome message... Response: 220 FTP server (Version 5.339PWS/AI) ready. Command: USER jonljacobi Response: 331 Password required for jonljacobi. Command: PASS Response: 230 User jonljacobi logged in. Command: SYST Response: 215 UNIX Type: L8 Command: FEAT Response: 500 'FEAT': command not understood. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current directory. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (216,87,188,9,217,140) Command: LIST Response: 150 Opening BINARY mode data connection for /bin/ls. Response: 426 Data connection error: No child processes. Error: Failed to retrieve directory listing Error: Connection closed by server

I'm not real up on ftp, but the one is opening an ASCII connection and the other binary. I've tried forcing ASCII with the transfer menu but it seems to have no effect.

If this is a server issue (no other FTP client fails to list but I do see the child processes message with Firefox) please let me know what it is so I can speak with knowledge to the tech people.

When setting speed limits at particular times, it is not being written to the xml file properly under Win7 64 bit

e.g. <SpeedLimits DlType="3" DlLimit="10" ServerDlLimitBypass="1" UlType="0" UlLimit="10" ServerUlLimitBypass="1"> <Download> <Rule Speed="25" Hour="6" Minute="0" Second="0"> <Days>127</Days> <From /> <To /> </Rule> <Rule Speed="12" Hour="23" Minute="0" Second="0"> <Days>127</Days> <From /> <To /> </Rule> </Download> <Upload /> </SpeedLimits>

As soon as the server is restated it loses the times you set the limits at.

Same on 9.33 and 9.34.

I realy want program auto open folder "Controls" when i open folder that has same name in other panel. Image below

operating system Win XP sp 3 on a daul core Intel processor

I often use many files for editing at the same time in one editor session( Textpad 5.3.1 from Helois Softwae solutions) . In the editor is the option 'Allow multiple instances to run' set to NO. When I open a selection of files the editor runs more than one time with a varying number of files opened. Quite annoying when one has to do the same changes for each opened session. I don't meet this problem when I use Explorer or WS-FTP 95 LE

Since version 3.3, FileZilla Client offers a tabbed interface permitting to connect to multiple servers at the same time.

But with FileZilla Client 3.3.1, all commands and messages of ALL FTP servers are displayed interspersed inside the SAME message log pane, without any indication of the associated FTP server.

That makes the messages inside the log pane very difficult to interpret.

In order to improve that, I suggest to attach 1 dedicated message log pane to each server tab.

Thanks in advance.

When I click the tab on the remote server to sort by FILENAME, the list comes up in 2 sections, both alphabetized. Why does the list go A-Z and then start over at A-Z???

Screen capture here: ​http://www.gonegraphics.com/misc/filezilla.jpg

When a connection is done by entering the server, user, password and port, the background of the quick connect bar and of the menu bar gets overriden by the status information.

I think it would be great to have a new command-line option to tell filezilla-client to connect to multiple servers at startup - each server opened in a different tab. Now that filezilla has this tab-feature it would be an useful implementation.

when connecting to SFTP-Filezilla Server, I can not resume files anymore. It always starts from the beginning. This used to work with older versions. Server configuration has not been changed, just client updated. Log is attached.

FileZilla Client version 3.3.1:

Version: 3.3.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2010-01-03 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.10 GnuTLS: 2.8.3

- FileZilla Server version 0.9.31 beta

FileZilla Settings > Autoban if a digit is keyed in for instance 1, a popup appears saying "Attempts has to be a number between 5 and 999." and it should be say the minimum number is 10 as the interface already tells. If for instance the number 5 is keyed in, you can save and the value is set to 10 instead.

Kind regards, Henk

When you type a path in the local site path that is incorrect a message is displayed that indicates it failed to change directory. This is fine and good. What is not is that after you click OK or hit 'enter' your cursor is moved from the end of the Local site path box to the beginning. This is annoying because it requires that you hit right arrow or click to the end of the box to re-enter the new path in the box. If it removed the incorrect path and left the cursor at the end of the box it would be perfect.

When I delete a file, the selection in the filelist will be removed. So after deleting a file I can't use the arrow-keys to move to the next file.

As far as I remember, in Version 2.xx of FileZilla, this worked fine. So when I deleted a file, then the next or the previous file in the list was automatically selected.

I hope this can be re-implemented in FileZilla 3.

When under Remote Desktop session, attempt to bring FileZilla from the system tray will hang FileZilla.

It would be great to be able to click a button that saves the current local and remote directores as the default connection directories for the current saved site.

At the moment it is possible to set this up in the advanced tab of the site manager. However we work (we are a web agency) with hundreds of sites and it would be fantastic to be able to save these with a single click.

Thanks fothe great work

hi, it would be nice than when updating a folder with multiple files, filezilla would first upload any not already existing files , and then overwrite already existing files at the end. I got the feeling that filezilla, just update files in "order". Sorry if I'm mistaken. I think it should give priority to newly added files. By the way, when you overwrite a folder with an other, Win 7 does this: it copy without asking new files, and only at the end, ask if you want to overwrite already existing files.

cheers

I had problems due to a bad translated item in the Portuguese language because the term used to translate the act of "entering a directory" (In portuguese up to now shows "Inserir diretório" - what is wrong in my oppinion) means "insert" and entering is one thing and inserting is another very different thing.

The way it is now ("Inserir diretório") suggests that clicking the folder, a NEW SUB DIRECTORY will be created inside the folder instead of opening it.

IMHO the best translation for the act of "entering/browsing a directory/folder" would be "Entrar no diretório" that means to "Go into the directory".

This words "Inserir diretório" must be changed, this expression is only valid when you are CREATING a sub directory not when you are just browsing it.

The correct translation for this item is "Entrar no diretório"

The windows version had a site manager drop down which isn't included in the mac version. Could this be added?

I have multiple accounts for a variety of different people and it is sometimes necessary to switch to another account using the filezilla client. Generally when I do this the directory listing of the previous connection is still displayed even though I have opened a new connection. The only way I can display the new listing is by exiting the filezilla client and restarting it using the new connection.

I use Filezilla client 3.3.1 on XP. I can view the ftp site through IE shows correct year but in Filezilla shows everything 2010 instead.

I attach picture as 1st screen print is from IE and 2nd screen print from Filzilla

While using the firezilla client I am frequently switching ftp servers and I keep using CTRL+A in the host/username/password/port fields for select all but it doesn't work. Right clicking and clicking select all works but is too time consuming and the shortcut would be much nicer. Thanks

Each time I receive and install an update, a temp file is created in my temp directory called nsh505.tmp and I cannot delete this file from the folder. The only way it dissappears is to re-boot. Pleas advise...thank you

Hi,

1) We have a rapidSSL wildcard SSL certificate such as *.domainname.com and when I connect to something.domainname.com, filezilla still gives me the warning, even though it is a valid SSL certificate which is recognized without warning by both firefox and internet explorer over regular https.

Once we accept the certificate once, we never have the issue again (as long as we select to save our answer so it doesn't ask again)

however, it would be nice if filezilla could authenticate wildcard certs similar to what IE and firefox do over regular https for wildcard certs.

2) There is no way to see the downloaded SSL certificates so that you can review the list / clear it if necessary to force an full SSL cert check again at the next connection. (If there is a way, I couldn't find it).

There is currently no way to view all the previously downloaded SSL certificates so that you can review the list / clear it if necessary to force an full SSL cert check again at the next connection directly in Filezilla. (If there is a way, I couldn't find it).

I did find the file: C:\Users\[USER]\AppData\Roaming\FileZilla\trustedcerts.xml so it's nice to know I can clear them out myself. However, it would be nice to have the option in the filezilla client in the future.

You could offer a way to look at the saved/trusted SSL certs and allow us to view them and delete them. That would be useful for us.

thanks,

Pierre

There are occasions where I have files that are out of the norm - binary files w/o any extension for example. Consider adding a right-click option for upload/download to include upload_special/download_special. The "special" pick would allow a one-shot override of the ASCII / Binary / AUTO config setting.

Thanks for a great product!

Rick T

hello,

Logging System in filezilla server is very poor. It would be nice to log per user, per group, and per actions. I would like to see, from the log file, what files has a client download. Also it would be nice for the user to make his own perriod of every log file not only per day. I have read and some other ideas in other tickets. I think the Logging System needs a review...

thanks Chrysostomos Kolovos

hello i've got a problem with filezilla and it hasn't been corrected with the last release. my problem is: when i send more than one file on my 'freebox' (wich is a multimedia box gaved by my internet provider 'free' in france) make me a windows blue error with memory cache copy on the hardisk. I didn't have that problem before with vista but it have appeared with my new operating system windows 7 v7100. my computer is a vaio vgn-fw11M

When I drag and drop a file from the windows browser on to the FileZilla window (open on the FTP server page) the file uploads corretly. However after it is completed, I get another pop-up asking to overwrite the file. It seems that a second upload wants to start with the same file.

This started happening about 1-2 weeks ago,

The local list view pane for local files in a directory with many files (not sure exactly how many), or perhaps large files, is prohibitively slow on my Windows 7 machines. It brings Filezilla to a crawling halt.

Steps to reproduce issue:

1. Start a large file transfer from a remote source to a local external HDD.
2. Close Filezilla before xfr is complete.
3. Disconnect or turn off external HDD.
4. Reopen Filezilla.

   A message appears saying that the file cannot be found for writing. The file is removed from the bottom pane.

5. Reconnect/turn on the external HDD.

   The file does not reappear in the bottom pane of Filezilla.

6. Close and Reopen Filezilla.

   The file still does not reappear.

Product FileZilla Client 3.3.1 ​https://www.ohloh.net/projects/filezilla/download?filename=FileZilla_3.3.1_win32.zip

The client version was downloaded on Wednesday, January 06, 2010, 6:47:07 PM.

The client file name: FileZilla_3.3.1_win32.zip

The link used to get the file: ​http://d10xg45o6p6dbl.cloudfront.net/projects/f/filezilla/FileZilla_3.3.1_win32.zip

Originally, the file as shown by Windows XP, displayed a file size of 15,569 bytes. I uploaded the file to the Linux server and FileZilla read a file size of 15,501 bytes even though Windows reported a 15,569 byte file size.

I discovered that one specific character within the file caused the problems. I believe it was a null (character 0) character that caused the problems. Anyways, I do not know if FileZilla 3.3.1 failed to report the size correctly or if the Linux OS failed to report the size correctly. FileZilla showed two different sizes for the files on the two different systems.

I copied and pasted what I thought was text to a file but it had a character in it that SciTE accepted (but displayed as a space character Hex:20h, Decimal:32). I ran into this problem once before a long time ago, but I believe I used WS-FTP32 in that case.

Anyways, the problem that exists with FileZilla, as I see it, is that FileZilla would be a little better if it analyzed the file before it uploaded it, and if FileZilla found a binary character in an ASCII (text) file, it probably should alert the user.

One other thing, if it detects that the uploaded file is 15,501 bytes while the file to get uploaded (the source) is 15,569, I feel it should report that to the user with a possible explanation for the differences in size.

Thank you for your time.

-- James Carlock aka, Jim Carlock

in some cases i want to change the maximum connection speed on the fly. is there a way to implement these settings in the status bar?

I have a dependency tracking module in my app. List of all needed files is created in a text file.

I'd like that Filezilla could automatically upload files listed in specified text file.

When i doubleclick an afp-file the file will be transferred to the temporary folder and the associated program (AFPBROWSE.exe from Beta Systems) is started, but the browser does not open the file.

Hello,
I've got a folder on my FTP server, with a space as name. It is impossible to access this folder using FileZilla Client. It looks like FileZilla takes the last modified date in a weird format (Jan 18 15:38) as "name" (and doesn't show anything in the "last modified" column), so the folder is "not found" when I'm trying to do anything with it.
I hope you can fix this annoying bug...

when I am updating my web site, I will typically

0. connect
1. change local directory
2. change remote directory
3. upload files
4. edit some files with my editor
5. change local directory
6. change remote directory
7. upload files
8. goto step 4
9. disconnect when done.

the connection stops working. I no longer get directory listings. I haven't tried doing an upload to see if it works when this happens. it happens after about the 2nd set of files.

Hi Earlier,

One of my user is able to connect to one site through filezilla.But some days back when my network engineer did a change in routing.He is unable to connect to it.

However i am able to connect to the site from same office with freshly installed filezilla.Is there any option to clean the old value stored in users pc.I have uninstalled and reinstalled filezilla in the user pc but still no luck.

Regards sk

If in the application settings a proxy enabled, and the proxy password field is emtpy, then request for a password, when connect to a ftp server, that want use this proxy.

With filezilla set to passive mode, a new connection to the server is created. This session will remain logged in for the duration of the server timeout setting. However, if a file is transfered during this session, as soon as the file is uploaded, we see about 55 seconds before the connection times out. For whatever reason, the time out seems to change after a file is uploaded.

I have my default "File Exists Action" set to "Ask For Action". I connect to a server by FTP. The first time I upload a file it asks me what action to take and I choose "Overwrite" and I do not select the "Always use this action" box. I can repeat this upload many times and it behaves correctly allowing me to choose to overwrite. After I have worked on something else for a while while leaving Filezilla running, making code modifications, for example, I then upload the same file again and it has forgotten that I want to be asked about overwriting.

The client continues to fail to prompt me until I restart the application, then it behaves properly again for an undefined period of time. The method I am using to trigger an upload is to drag a file from an Explorer window into the file list box of the Filezilla GUI. The times it has occurred, Filezilla has always been partially hidden behind other applications but I don't know how that affects it.

I will try some additional testing and see if I can reliably reproduce the problem.

Hello !

It's really bad:I cannot connect to any server and it's not a firewall issue [the build-in windows ftp-client CAN!]. So far I remember, a do not know which previous version was usable for me.

Would be great, someone has a look onto this.

Thanks, --mabra

Updated my installation to version 3.3.1 on Saturday.

FileZilla Client

Version: 3.3.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2010-01-03 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.10 GnuTLS: 2.8.3

I maintain three Windows Sites at AMHOSTING.COM. These all require ACTIVE transfer mode. Now, all three sites no longer work with FileZilla.

The earlier version worked fine. Native FTP sessions with (from Windows NT; Windows Vista 32 and 64 bit) FTP sessions using SMARTFTP (using ACTIVE transfer) work fine.

Your latest version doesn't work. Here is a log Filezilla ... and SMARTFTP

Filezilla =================================== Status: Resolving address of www.powersportsads.net Status: Connecting to 204.10.137.244:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER XXXXXXX Response: 331 Password required for XXXXXX. Command: PASS Response: 230 User XXXXXX logged in. Status: Connected Status: Retrieving directory listing... Command: CWD /httpdocs Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PORT 24,211,50,212,5,57 Response: 500 Invalid PORT Command. Command: PASV Response: 227 Entering Passive Mode (204,10,137,244,10,195). Command: LIST Response: 425 Can't open data connection. Error: Failed to retrieve directory listing

SMARTFTP [03:49:21] SmartFTP v4.0.1072.0 [03:49:21] Resolving host name "www.powersportsads.net" [03:49:21] Connecting to 204.10.137.244 Port: 21 [03:49:21] Connected to www.powersportsads.net. [03:49:21] 220 Microsoft FTP Service [03:49:21] USER XXXXXX [03:49:21] 331 Password required for XXXXXX. [03:49:21] PASS (hidden) [03:49:21] 230 User XXXXXX logged in. [03:49:21] SYST [03:49:21] 215 Windows_NT [03:49:21] Detected Server Type: Windows NT [03:49:21] RTT: 124.972 ms [03:49:21] FEAT [03:49:22] 211-FEAT [03:49:22] SIZE [03:49:22] MDTM [03:49:22] 211 END [03:49:22] TYPE I [03:49:22] 200 Type set to I. [03:49:22] REST 0 [03:49:22] 350 Restarting at 0. [03:49:22] PWD [03:49:22] 257 "/" is current directory. [03:49:22] CWD /httpdocs [03:49:23] 250 CWD command successful. [03:49:23] PWD [03:49:23] 257 "/httpdocs" is current directory. [03:49:23] TYPE A [03:49:23] 200 Type set to A. [03:49:23] PORT 192,168,1,104,5,62 [03:49:23] 200 PORT command successful. [03:49:23] LIST -aL [03:49:23] 150 Opening ASCII mode data connection for /bin/ls. [03:49:23] 3296 bytes transferred. (24.7 KB/s) (130 ms) [03:49:23] 226 Transfer complete. [03:49:23] MDTM _vti_inf.html [03:49:24] 213 20091110104827 [03:49:24] Time zone offset: -28800 seconds (-8.0 hours)

HOPE THIS HELPS

It would be nice if there was a way to see the Total Time that a transfer took to complete (or fail for that matter). Would like to see a Total Time column in both the Succesful Transfers window and the Failed Transfers window. That way, for large files, you can check back after they have completed and see how long it took.

Thanks

Currently using v3.3.1 on Windows XP Pro

I am running Win <font style='color:black; background-color:Yellow;'>XP</font> <font style='color:black; background-color:Yellow;'>SP2</font> <font style='color:black; background-color:Yellow;'><font style='color:black; background-color:Yellow;'>Filezilla</font></font> <font style='color:black; background-color:Yellow;'>v3</font>.3.1

First of all when clicking the toggle processing of the transfer queue button on the toolbar doesn't stay depressed. Also if I double click on any local file it immediately transfers the file even though the button doesn't indicate that processing is enabled AND there is no check on the Transfer > Process Queue menu item. When there are files being transferred then both button and menu change to show that they are enabled from the disabled state. So what's the point? I would like to halt all processing and set up a transfer queue and once I'm done adding and removing files from the queue, I would like to toggle the processing and let <font style='color:black; background-color:Yellow;'><font style='color:black; background-color:Yellow;'>Filezilla</font></font> do its magic.

I would also like to export/import a queue and I'm assuming that's what the menu items do but unfortunately I can't stop <font style='color:black; background-color:Yellow;'><font style='color:black; background-color:Yellow;'>Filezilla</font></font> from transferring in time to test that.

Also if I manage to quickly hit the toggle button while it's transferring I can stop it, but as soon as I add something else to the queue it start back up on its own without any indication that I want it to.

Thank you for all your hard work. <font style='color:black; background-color:Yellow;'><font style='color:black; background-color:Yellow;'>Filezilla</font></font> is an amazing utility.

I got this error when i tried to remote edit a file.

The file 'index.php' cannot be opened: The associated program (WX_DDE#"C:\Program Files\Adobe\Adobe Dreamweaver CS4\Dreamweaver.exe","index.php"##System#) could not be found.

The listing in a directory is truncated to 2000 files. herewith, you can't copy a directory or can't see the complete contents. Request: can the Output truncated to 2000 matches be arrange in the settings, in that way that you can change the number ? MLSD Response: 150 Accepted data connection Response: 226-Options: -a -l Response: 226 Output truncated to 2000 matches Status: Directory listing successful

Hi

Seems the process queue is not preserved incase of a outage or windows blue screen.

seems to work if click close and say OK to the confirm box where it pauses queue and disconnects from server

so when you enter filezilla you can right click and say process queue again and it resumes from where left off

Im using the latest client

I use Windows 7 and everytime I scroll completely down on the client side to show the last file, Filezilla Client hangs up and all I can do is to close the process. So I won't be able to upload the last item to the server.

Been getting the following message pretty regular since the latest update: FileZilla Client

Version: 3.3.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2010-01-03 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.10 GnuTLS: 2.8.3

Problem:

1st popup: "failed to write xml"

2nd popup: "can't open file 'C:\Users\[myuseracctname]\AppData\Roaming\filezilla\filezilla.xml' (error 1224: the requested orperation cannot be performed on a file with a user-mapped section open.)

!!! I don't recall having user-mapped anything, let alone filezilla.xml !!!

When FileZilla Client 3.3.1 deletes a remote directory, it disables the folder comparison feature but doesn't re-enable it afterwards.

When this feature needs to be disabled, Filezilla should remember the status of this feature and re-set it after completing the task.

When transfering complex subdirectory structures from a Linux server to Windows 7 Ultimate 64bit, FileZilla client leaks considerable amounts of memory, several kByte per file transferred: after 104245 files in 9000 subdirectories, memory consumption rises to 260 MByte. Further transfers then take hours to complete.

Steps i did: 1)Open filezilla verion 3.2.4.1 2)Click "Nieuwe versie beschikbaar!" button (Im using the Dutch version) 3)Select 3.3.1 (only option available) 4)press volgende (Next) 5)press Opslaan (Save) (without changing default download settings, set to <usernam>/downloads) Result: Popup screen saying "Time creation failed"

When I attempt to connect to Windows 2008 IIS ftp server I manage to connect, however when FileZilla attempts to list the directory contents it fails. Settings the debug level to 4 I see:

Command: LIST Trace: CTransferSocket::OnConnect Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 425 Can't open data connection. Trace: CFtpControlSocket::TransferParseResponse() Trace: code = 4 Trace: state = 4 Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: CFtpControlSocket::ListSubcommandResult() Trace: state = 3 Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Error: Failed to retrieve directory listing Trace: CFileZillaEnginePrivate::ResetOperation(2)

Using the Windows FTP client, I am able to connect and list the directory contents without any error.

I'm not sure if it's relevant or not, but the user ID I have to use includes the domain (i.e. username = <domain>\<user ID>).

It would be helpful to be able to set a SMPT server for E-mail notification once the transfers are uploaded/downloaded.

Damn you make this hard. When I installed the latest version, it stopped retaining the port number in quickconnnect. If I try to copy the about box I get an error.

Version: 3.3.1 OS: Windows 7 Pro in Windows 2003 domain IPv6 is enabled Editor: UltraEdit 15.20 System: QuadCore AMD 2.8 GHz CPU, 8G RAM, 1TB HDD

Lorsque j'essaie de me connecter avec la version 3.3.1, le logiciel me répond :

Réponse : 421 Vous ne pouvez avoir que 2 connexions simultannees Erreur : Impossible d'établir une connexion au serveur Statut : Délai d'attente de 5 secondes suite à l'échec de la précédente tentative de connexion...

Je n'avais pas ce problème avec la version 2.2.32

I downloaded the new version of FZ as prompted just now. Everything installed as expected, but if I select a server via Site Manager, the address is resolved to an I.P. but the connection is not made. FZ is not hanging or crashing, it's still operable on the client side, but it will not make the connection to the remote server. I've checked access to servers by going through browser and pinging sites etc, so internet connection is good. _ FileZilla Client

Version: 3.3.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2010-01-03 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.10 GnuTLS: 2.8.3

I am using site specific bookmarks but these are effective only on the local site but not on the remote site of the FTP connection. Are there any rules to specify the remote directory in a bookmark ? I have Filezilla client 3.3.1

Settings -> File Editing

It would be nice if current checkbox:

[ ] Watch locally edited files and prompt to upload modifications

were broken into two checkboxes:

[ ] Watch locally edited files and upload modifications

[ ] Prompt before upload

I want locally modified files to upload without a prompt.

Thanks and keep up the good work!

Dave Miller

This is not the problem tracked and solved (I searched). This is a new one. Using 3.3.1. When on the remote side there is a file that has a leading blank in the name AND the first letter is a capital one, transfer fails. Using ftpd on FreeBSD 7.2 p4 x86 on remote server. Steps to reproduce:

• go in console on the ftp server and enter the ftp root
• cp any file from the system: cp /var/log/messages .
• from the client all works ok and can transfer messages file
• mv messages \ messages
• from the client it is ok again, with leading space
• mv \ messages \ Messages
• the client fails to transfer the file

Tried with any kind of file/permission combo, blank+capital seems to be the culprit. HTH Bye

FileZilla Client

Version: 3.3.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2010-01-03 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.10 GnuTLS: 2.8.3

There seems to be a bug in directory listening.

The problem folder is named " #complete# ". Using no ssl connection there is no problem with listening this directory, but if I use FTPES the status window gives following error message:

Fehler: GnuTLS error -9: A TLS packet with unexpected length was received. Status: Server hat die TLS-Verbindung nicht ordnungsgemäß geschlossen Fehler: Could not read from transfer socket: ECONNABORTED - Connection aborted

All other directorys work fine. Even subfolders from #complete# are accessible via the direct url.

To solve the problem I tried to force utf8 characters in servermanager settings. This had no effect.

Would be nice if you could resolve this bug.

Changing attributes on and deleting many (1000+) files takes quite some time, and seem to be limited to one connection.

Would it be possible for these requests to be queued or at least respect the maximum simultaneous transfers setting?

Also, whilst performing these actions, it is not possible to browse/perform other actions on the remote site.

It would be useful to be able to see why a file has failed to transfer. If you're transferring many files, it's not easy to find the failed file's server log/response.

I can't open anyway catalog with cyrillic titles. I wrote about this bug before. And you send me report — bug fixed. But he still here.)) You can see this on this picture [ ​http://s3.sendpic.ru/i/1022/i/0ZK.jpeg.html] I use XP64bit with all last updates. Also FireFox (Mozilla/5.0 (Windows; U; Windows NT 5.2; en-US; rv:1.9.2) Gecko/20100115 Firefox/3.6 (.NET CLR 3.5.30729) ) too incorrect display those folders. I give to You this link ​ftp://80.64.109.251/ but i don't know how You can enter on it. I think this is part of your local net. And maybe you can't enter in this ftp. Best regards Valentin. Peace!

When navigating through folders a single click very often leads to a file or folder renaming. More than that, sometimes when I double click on the folder - it requests this folder's contents AND activates renaming feature, so when it finishes listing new folder - old renaming box stays on the screen, as if now you are renaming a file or a folder inside this new listed folder. If you hit Return - then a file in this new folder will be renamed to the name of a file from a previous folder.

I think it's a high priority bug, since I had to stop using Filezilla completely.

When visiting a sequence of sites to download log files your system requires a second entry of a password despite the box to remember the password being ticked. Sequence of events -

1. Log onto first site, download, no problem.
2. Log onto second site, closing first option.
3. download but one file requires second entry of password whereas the rest don't.
4. Happens on every subsequent site visited during the session.

Also, why force users to go through several barriers to entry before they can report a bug. I have often not bothered becuase of your beaurocratic insistence on accounts. As a result bugs are not reported on time or at all.

Because FileZilla supports drag-and-drop, i thing it woulod be a neat option to have a button next to the two "Toggle display for the local/remote directory tree" with "Toggle display of the local file borwser" which would hide *both* the directory tree and the file list of the local file system.

Rationale: in this way i can add in the registry a new action "FileZilla..." attached to "HKEY_CLASSES_ROOT\*\Shell" and to "HKEY_CLASSES_ROOT\Directory\shell" which would simply open the FTP client window without the local file browser view, and then i can just drag-and-drop files and folders from explorer (or nautilus or whatever) to/from the remote FTP window. I think it's such an easy thing to do that it'd worth the half-an-hour effort.

Very often when using FTP, I find myself editing two or three files in different folders (for example I might have CSS, Javascript, images and HTML/PHP all in different folders).

When it comes to uploading though, I have to switch folders constantly to upload them. It would be great if there was a mechanism to assign files to a "repeat upload" state, then when I've edited them, I click one button to upload them all.

The only thing that comes close currently is you can go to the "Successful transfer" tab, highlight some files and choose "Reset and requeue" from the context menu, however this only works once - you have to do the above again for subsequent uploads - plus you have to click another button to "toggle processing of queue".

I have written a SHA512 implementation for my own use, and I could not get get the right test results with integer calculations using gcc -O2 or -O3. So I am saying that gcc -O2 and gcc -O3 both generate corrupt, improper code. gcc -O generates good code.

SHA512 involves a lot of shifts, multiplies, adds. I understand packets (if you are doing that) require calculations as well, for calculating length, size, checksums, etc. so there may be some similarities in the calculations.

I suggest you stay away from using -O2 or -O3 and stick with -O for compiler optimization.

You may find some bugs disappear once you switch to -O.

Suggest you do the same with FileZilla Server.

I also use mingw. I used to use mingw, but now I use mingw-w64, since it has TR1 and it can compile 64-bit code.

There is also a known compiler bug I discovered (gcc folk won't fix it - talk to them?) that -fpack-struct does not work with iostream, locale, fstream C++ libraries. It will generate huge numbers of errors. They said something like it is not supposed to work together or something like that. (bolderdash)

These are not a problem with microsoft or borland commercial compilers.

I am basing this bug on the information I obtained in the Help|About dialog where it says "Compiler Flags":

FileZilla Client

Version: 3.3.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2010-01-03 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.10 GnuTLS: 2.8.3

I have a feeling I already know the answer to this request :) however, it needs to be asked.

I would like to have pass through authentication on the Filezilla server to the host os security provider. Specifically, I would like the ability to map an FTP Login (ACustomer) to a Windows Account (ACustomer) for two purposes: 1 - to use the Windows authentication (so password is only stored once) 2 - to use impersonation to validate User Access Permissions to files and directories in the Windows File System.

To the user, everything would still look like / behave like vanilla ftp; but this would simplify the administration side of things.

Life is too short to duplicate my os/file system security settings in the FileZilla Server UI.

I keep having this issue when I try to delete folders from the FTP site. They say file is in use, but they are not. Sometimes, the contents of the folders will delete but the actual folder cannot be deleted or renamed.

Command: PASV Response: 227 Entering Passive Mode (64,82,41,123,44,236). Command: LIST -a Response: 125 Data connection already open; Transfer starting. Response: 226 Transfer complete. Status: Directory listing successful Command: RMD Hitches for Crossovers Response: 550 Hitches for Crossovers: The process cannot access the file because it is being used by another process.

OR

Command: RMD (Mecum) iPhone App Response: 550 (Mecum) iPhone App: The process cannot access the file because it is being used by another process.

If Internet connection breaks, any queue breaks too! There is no way to resume that transfer besides closing FZ, restarting, and new uploading then resume works BUT not always sending the file then completely! File broken! Stopping Queue and then starting again gets always an error: ftpcontrolsocket.cpp(1819): Waiting for replies to skip before sending next command... caller=0x10ae028

I would real recommend to add to the Process Queue etc; something like Pause Queue, and Resume Queue, and to secure that if any Internet connection was broken whilst transferring, that after some timeout and Internet connection is resumed transfer is restarting automatically and not as now crash the connection with that ftpcontrolsocket error! Our Internet connection cuts often off and comes back after 1-2 minutes only...

Not all icons shown in the various design-skins are shown in the toolbar. Where I can edit my own toolbar - there is no way to do it.

e.g. I'm looking for the button to copy all selected files to my server. (from the left to the right)

Kind regards KH (sorry for my english)

I have a windows 2003 server that needs to share out some samba network resources, but I cant get it to work. As specified in the 'How to make network shares available using FileZilla Server' forum thread, I have: 1: Changed so that the filezilla service logs on with a user that has access to these resources. I have other services using this user that can access them. 2: Set Filezilla to use UNC-paths instead of mapped drives.

If I share one of these network folders with an alias, the folder doesnt show up at all. If I share one of them as home directory, I get an empty directory listing.

There are no errors in the client or in the server console at all.

On Mac OSX generally when you click the close button of an application it will hide the application (i.e it's still running in the Dock) rather than quitting it.

This has caught me out a couple of times when I'm downloading/uploading files and click the red-x expecting the app to carry on in the background but it actually quits FileZilla.

To sum up: Red-x should do the same as "Hide FileZilla" (Cmd-H).

Resume worked in earlier versions tried. This is now version 3.3.1.

I connect to the server, which failed on a 5GB upload with a timeout. When I resume, it starts and immediately fails claiming the user aborted. In debug logging, instead it says:

08:21:36 Error: Disconnected from server: ECONNABORTED - Connection aborted

It then repeats the whole cycle, over and over until I actually do abort it.

Attached is the full log from connection to giving up.

08:21:00 Status: Resolving address of rbac.com 08:21:00 Status: Connecting to 208.68.104.122:21... 08:21:00 Status: Connection established, waiting for welcome message... 08:21:00 Trace: CFtpControlSocket::OnReceive() 08:21:00 Response: 220 192.168.30.26 FTP server ready 08:21:00 Trace: CFtpControlSocket::SendNextCommand() 08:21:00 Command: USER rbacinc 08:21:00 Trace: CFtpControlSocket::OnReceive() 08:21:00 Response: 331 Password required for rbacinc. 08:21:00 Trace: CFtpControlSocket::SendNextCommand() 08:21:00 Command: PASS 08:21:00 Trace: CFtpControlSocket::OnReceive() 08:21:00 Response: 230 User rbacinc logged in. 08:21:00 Trace: CFtpControlSocket::SendNextCommand() 08:21:00 Command: SYST 08:21:00 Trace: CFtpControlSocket::OnReceive() 08:21:00 Response: 215 UNIX Type: L8 08:21:00 Trace: CFtpControlSocket::SendNextCommand() 08:21:00 Command: FEAT 08:21:00 Trace: CFtpControlSocket::OnReceive() 08:21:00 Response: 211-Features: 08:21:00 Trace: CFtpControlSocket::OnReceive() 08:21:00 Response: MDTM 08:21:00 Trace: CFtpControlSocket::OnReceive() 08:21:00 Response: REST STREAM 08:21:00 Response: SIZE 08:21:00 Response: 211 End 08:21:00 Status: Connected 08:21:00 Trace: CFtpControlSocket::ResetOperation(0) 08:21:00 Trace: CControlSocket::ResetOperation(0) 08:21:00 Trace: CFileZillaEnginePrivate::ResetOperation(0) 08:21:00 Status: Retrieving directory listing... 08:21:00 Trace: CFtpControlSocket::SendNextCommand() 08:21:00 Trace: CFtpControlSocket::ChangeDirSend() 08:21:00 Command: CWD /Viewpoints 08:21:01 Trace: CFtpControlSocket::OnReceive() 08:21:01 Response: 250 CWD command successful 08:21:01 Trace: CFtpControlSocket::SendNextCommand() 08:21:01 Trace: CFtpControlSocket::ChangeDirSend() 08:21:01 Command: PWD 08:21:01 Trace: CFtpControlSocket::OnReceive() 08:21:01 Response: 257 "/Viewpoints" is current directory. 08:21:01 Trace: CFtpControlSocket::ResetOperation(0) 08:21:01 Trace: CControlSocket::ResetOperation(0) 08:21:01 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:01 Trace: CFtpControlSocket::ListSubcommandResult() 08:21:01 Trace: state = 1 08:21:01 Trace: CFtpControlSocket::SendNextCommand() 08:21:01 Trace: CFtpControlSocket::TransferSend() 08:21:01 Trace: state = 1 08:21:01 Command: TYPE I 08:21:01 Trace: CFtpControlSocket::OnReceive() 08:21:01 Response: 200 Type set to I 08:21:01 Trace: CFtpControlSocket::TransferParseResponse() 08:21:01 Trace: code = 2 08:21:01 Trace: state = 1 08:21:01 Trace: CFtpControlSocket::SendNextCommand() 08:21:01 Trace: CFtpControlSocket::TransferSend() 08:21:01 Trace: state = 2 08:21:01 Command: PASV 08:21:01 Trace: CFtpControlSocket::OnReceive() 08:21:01 Response: 227 Entering Passive Mode (208,68,104,122,150,29). 08:21:01 Trace: CFtpControlSocket::TransferParseResponse() 08:21:01 Trace: code = 2 08:21:01 Trace: state = 2 08:21:01 Trace: CFtpControlSocket::SendNextCommand() 08:21:01 Trace: CFtpControlSocket::TransferSend() 08:21:01 Trace: state = 4 08:21:01 Command: LIST 08:21:01 Trace: CTransferSocket::OnConnect 08:21:01 Trace: CTransferSocket::OnReceive(), m_transferMode=0 08:21:01 Trace: CFtpControlSocket::OnReceive() 08:21:01 Response: 150 Opening ASCII mode data connection for file list 08:21:01 Trace: CFtpControlSocket::TransferParseResponse() 08:21:01 Trace: code = 1 08:21:01 Trace: state = 4 08:21:01 Trace: CFtpControlSocket::SendNextCommand() 08:21:01 Trace: CFtpControlSocket::TransferSend() 08:21:01 Trace: state = 5 08:21:01 Trace: CTransferSocket::OnReceive(), m_transferMode=0 08:21:01 Trace: CTransferSocket::TransferEnd(1) 08:21:01 Trace: CFtpControlSocket::TransferEnd() 08:21:01 Trace: CFtpControlSocket::OnReceive() 08:21:01 Response: 226 Transfer complete. 08:21:01 Trace: CFtpControlSocket::TransferParseResponse() 08:21:01 Trace: code = 2 08:21:01 Trace: state = 7 08:21:01 Trace: CFtpControlSocket::ResetOperation(0) 08:21:01 Trace: CControlSocket::ResetOperation(0) 08:21:01 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:01 Trace: CFtpControlSocket::ListSubcommandResult() 08:21:01 Trace: state = 3 08:21:01 Trace: CFtpControlSocket::SendNextCommand() 08:21:01 Trace: CFtpControlSocket::ListSend() 08:21:01 Trace: state = 4 08:21:01 Status: Calculating timezone offset of server... 08:21:01 Command: MDTM 2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:02 Trace: CFtpControlSocket::OnReceive() 08:21:02 Response: 213 20100209050928 08:21:02 Trace: CFtpControlSocket::ListParseResponse() 08:21:02 Status: Timezone offsets: Server: 0 seconds. Local: -28800 seconds. Difference: -28800 seconds. 08:21:02 Trace: CFtpControlSocket::ResetOperation(0) 08:21:02 Trace: CControlSocket::ResetOperation(0) 08:21:02 Status: Directory listing successful 08:21:02 Trace: CFileZillaEnginePrivate::ResetOperation(0) 08:21:05 Status: Resolving address of rbac.com 08:21:05 Status: Connecting to 208.68.104.122:21... 08:21:05 Status: Connection established, waiting for welcome message... 08:21:05 Trace: CFtpControlSocket::OnReceive() 08:21:05 Response: 220 192.168.30.26 FTP server ready 08:21:05 Trace: CFtpControlSocket::SendNextCommand() 08:21:05 Command: USER rbacinc 08:21:05 Trace: CFtpControlSocket::OnReceive() 08:21:05 Response: 331 Password required for rbacinc. 08:21:05 Trace: CFtpControlSocket::SendNextCommand() 08:21:05 Command: PASS 08:21:05 Trace: CFtpControlSocket::OnReceive() 08:21:05 Response: 230 User rbacinc logged in. 08:21:05 Status: Connected 08:21:05 Trace: CFtpControlSocket::ResetOperation(0) 08:21:05 Trace: CControlSocket::ResetOperation(0) 08:21:05 Trace: CFileZillaEnginePrivate::ResetOperation(0) 08:21:05 Trace: CFtpControlSocket::FileTransfer() 08:21:05 Status: Starting upload of F:\rbac db\2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:05 Trace: CFtpControlSocket::SendNextCommand() 08:21:05 Trace: CFtpControlSocket::ChangeDirSend() 08:21:05 Command: CWD /Viewpoints 08:21:05 Trace: CFtpControlSocket::OnReceive() 08:21:05 Response: 250 CWD command successful 08:21:05 Trace: CFtpControlSocket::ResetOperation(0) 08:21:05 Trace: CControlSocket::ResetOperation(0) 08:21:05 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:05 Trace: FileTransferSubcommandResult() 08:21:15 Trace: CFtpControlSocket::SendNextCommand() 08:21:15 Trace: FileTransferSend() 08:21:15 Trace: CFtpControlSocket::SendNextCommand() 08:21:15 Trace: CFtpControlSocket::TransferSend() 08:21:15 Trace: state = 1 08:21:15 Command: TYPE I 08:21:15 Trace: CFtpControlSocket::OnReceive() 08:21:15 Response: 200 Type set to I 08:21:15 Trace: CFtpControlSocket::TransferParseResponse() 08:21:15 Trace: code = 2 08:21:15 Trace: state = 1 08:21:15 Trace: CFtpControlSocket::SendNextCommand() 08:21:15 Trace: CFtpControlSocket::TransferSend() 08:21:15 Trace: state = 2 08:21:15 Command: PASV 08:21:16 Trace: CFtpControlSocket::OnReceive() 08:21:16 Response: 227 Entering Passive Mode (208,68,104,122,150,37). 08:21:16 Trace: CFtpControlSocket::TransferParseResponse() 08:21:16 Trace: code = 2 08:21:16 Trace: state = 2 08:21:16 Trace: CFtpControlSocket::SendNextCommand() 08:21:16 Trace: CFtpControlSocket::TransferSend() 08:21:16 Trace: state = 3 08:21:16 Command: REST 2147483647 08:21:16 Trace: CFtpControlSocket::OnReceive() 08:21:16 Response: 350 Restarting at 2147483647. Send STORE or RETRIEVE to initiate transfer 08:21:16 Trace: CFtpControlSocket::TransferParseResponse() 08:21:16 Trace: code = 3 08:21:16 Trace: state = 3 08:21:16 Trace: CFtpControlSocket::SendNextCommand() 08:21:16 Trace: CFtpControlSocket::TransferSend() 08:21:16 Trace: state = 4 08:21:16 Command: STOR 2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:16 Trace: CTransferSocket::OnConnect 08:21:16 Trace: First EAGAIN in CTransferSocket::OnSend() 08:21:16 Trace: CTransferSocket::OnReceive(), m_transferMode=1 08:21:16 Trace: CFtpControlSocket::OnReceive() 08:21:16 Response: 150 Opening BINARY mode data connection for 2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:16 Trace: CFtpControlSocket::TransferParseResponse() 08:21:16 Trace: code = 1 08:21:16 Trace: state = 4 08:21:16 Trace: CFtpControlSocket::SendNextCommand() 08:21:16 Trace: CFtpControlSocket::TransferSend() 08:21:16 Trace: state = 5 08:21:16 Trace: CRealControlSocket::OnClose(10053) 08:21:16 Error: Disconnected from server: ECONNABORTED - Connection aborted 08:21:16 Trace: CControlSocket::DoClose(64) 08:21:16 Trace: CFtpControlSocket::ResetOperation(66) 08:21:16 Trace: CControlSocket::ResetOperation(66) 08:21:16 Trace: CFtpControlSocket::ResetOperation(66) 08:21:16 Trace: CControlSocket::ResetOperation(66) 08:21:16 Trace: CFileZillaEnginePrivate::ResetOperation(66) 08:21:16 Trace: CControlSocket::DoClose(64) 08:21:16 Trace: CControlSocket::DoClose(64) 08:21:16 Status: Resolving address of rbac.com 08:21:16 Status: Connecting to 208.68.104.122:21... 08:21:16 Status: Connection established, waiting for welcome message... 08:21:16 Trace: CFtpControlSocket::OnReceive() 08:21:16 Response: 220 192.168.30.26 FTP server ready 08:21:16 Trace: CFtpControlSocket::SendNextCommand() 08:21:16 Command: USER rbacinc 08:21:16 Trace: CFtpControlSocket::OnReceive() 08:21:16 Response: 331 Password required for rbacinc. 08:21:16 Trace: CFtpControlSocket::SendNextCommand() 08:21:16 Command: PASS 08:21:17 Trace: CFtpControlSocket::OnReceive() 08:21:17 Response: 230 User rbacinc logged in. 08:21:17 Status: Connected 08:21:17 Trace: CFtpControlSocket::ResetOperation(0) 08:21:17 Trace: CControlSocket::ResetOperation(0) 08:21:17 Trace: CFileZillaEnginePrivate::ResetOperation(0) 08:21:17 Trace: CFtpControlSocket::FileTransfer() 08:21:17 Status: Starting upload of F:\rbac db\2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:17 Trace: CFtpControlSocket::SendNextCommand() 08:21:17 Trace: CFtpControlSocket::ChangeDirSend() 08:21:17 Command: CWD /Viewpoints 08:21:17 Trace: CFtpControlSocket::OnReceive() 08:21:17 Response: 250 CWD command successful 08:21:17 Trace: CFtpControlSocket::ResetOperation(0) 08:21:17 Trace: CControlSocket::ResetOperation(0) 08:21:17 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:17 Trace: FileTransferSubcommandResult() 08:21:17 Status: Retrieving directory listing... 08:21:17 Trace: ftpcontrolsocket.cpp(1275): List called from other command caller=0p16d1950 08:21:17 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:17 Trace: CFtpControlSocket::ListSubcommandResult() 08:21:17 Trace: state = 1 08:21:17 Trace: CFtpControlSocket::SendNextCommand() 08:21:17 Trace: CFtpControlSocket::TransferSend() 08:21:17 Trace: state = 1 08:21:17 Command: TYPE I 08:21:17 Trace: CFtpControlSocket::OnReceive() 08:21:17 Response: 200 Type set to I 08:21:17 Trace: CFtpControlSocket::TransferParseResponse() 08:21:17 Trace: code = 2 08:21:17 Trace: state = 1 08:21:17 Trace: CFtpControlSocket::SendNextCommand() 08:21:17 Trace: CFtpControlSocket::TransferSend() 08:21:17 Trace: state = 2 08:21:17 Command: PASV 08:21:17 Trace: CFtpControlSocket::OnReceive() 08:21:17 Response: 227 Entering Passive Mode (208,68,104,122,150,42). 08:21:17 Trace: CFtpControlSocket::TransferParseResponse() 08:21:17 Trace: code = 2 08:21:17 Trace: state = 2 08:21:17 Trace: CFtpControlSocket::SendNextCommand() 08:21:17 Trace: CFtpControlSocket::TransferSend() 08:21:17 Trace: state = 4 08:21:17 Command: LIST 08:21:17 Trace: CTransferSocket::OnConnect 08:21:17 Trace: CTransferSocket::OnReceive(), m_transferMode=0 08:21:17 Trace: CFtpControlSocket::OnReceive() 08:21:17 Response: 150 Opening ASCII mode data connection for file list 08:21:17 Trace: CFtpControlSocket::TransferParseResponse() 08:21:17 Trace: code = 1 08:21:17 Trace: state = 4 08:21:17 Trace: CFtpControlSocket::SendNextCommand() 08:21:17 Trace: CFtpControlSocket::TransferSend() 08:21:17 Trace: state = 5 08:21:17 Trace: CTransferSocket::OnReceive(), m_transferMode=0 08:21:17 Trace: CTransferSocket::TransferEnd(1) 08:21:17 Trace: CFtpControlSocket::TransferEnd() 08:21:17 Trace: CFtpControlSocket::OnReceive() 08:21:17 Response: 226 Transfer complete. 08:21:17 Trace: CFtpControlSocket::TransferParseResponse() 08:21:17 Trace: code = 2 08:21:17 Trace: state = 7 08:21:17 Trace: CFtpControlSocket::ResetOperation(0) 08:21:17 Trace: CControlSocket::ResetOperation(0) 08:21:17 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:17 Trace: CFtpControlSocket::ListSubcommandResult() 08:21:17 Trace: state = 3 08:21:17 Trace: CFtpControlSocket::ResetOperation(0) 08:21:17 Trace: CControlSocket::ResetOperation(0) 08:21:17 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:17 Trace: FileTransferSubcommandResult() 08:21:17 Trace: CFtpControlSocket::SendNextCommand() 08:21:17 Trace: FileTransferSend() 08:21:17 Trace: CFtpControlSocket::SendNextCommand() 08:21:17 Trace: CFtpControlSocket::TransferSend() 08:21:17 Trace: state = 2 08:21:17 Command: PASV 08:21:18 Trace: CFtpControlSocket::OnReceive() 08:21:18 Response: 227 Entering Passive Mode (208,68,104,122,150,43). 08:21:18 Trace: CFtpControlSocket::TransferParseResponse() 08:21:18 Trace: code = 2 08:21:18 Trace: state = 2 08:21:18 Trace: CFtpControlSocket::SendNextCommand() 08:21:18 Trace: CFtpControlSocket::TransferSend() 08:21:18 Trace: state = 3 08:21:18 Command: REST 2147483647 08:21:18 Trace: CFtpControlSocket::OnReceive() 08:21:18 Response: 350 Restarting at 2147483647. Send STORE or RETRIEVE to initiate transfer 08:21:18 Trace: CFtpControlSocket::TransferParseResponse() 08:21:18 Trace: code = 3 08:21:18 Trace: state = 3 08:21:18 Trace: CFtpControlSocket::SendNextCommand() 08:21:18 Trace: CFtpControlSocket::TransferSend() 08:21:18 Trace: state = 4 08:21:18 Command: STOR 2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:18 Trace: CTransferSocket::OnConnect 08:21:18 Trace: First EAGAIN in CTransferSocket::OnSend() 08:21:18 Trace: CTransferSocket::OnReceive(), m_transferMode=1 08:21:18 Trace: CFtpControlSocket::OnReceive() 08:21:18 Response: 150 Opening BINARY mode data connection for 2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:18 Trace: CFtpControlSocket::TransferParseResponse() 08:21:18 Trace: code = 1 08:21:18 Trace: state = 4 08:21:18 Trace: CFtpControlSocket::SendNextCommand() 08:21:18 Trace: CFtpControlSocket::TransferSend() 08:21:18 Trace: state = 5 08:21:18 Trace: CRealControlSocket::OnClose(10053) 08:21:18 Error: Disconnected from server: ECONNABORTED - Connection aborted 08:21:18 Trace: CControlSocket::DoClose(64) 08:21:18 Trace: CFtpControlSocket::ResetOperation(66) 08:21:18 Trace: CControlSocket::ResetOperation(66) 08:21:18 Trace: CFtpControlSocket::ResetOperation(66) 08:21:18 Trace: CControlSocket::ResetOperation(66) 08:21:18 Trace: CFileZillaEnginePrivate::ResetOperation(66) 08:21:18 Trace: CControlSocket::DoClose(64) 08:21:18 Trace: CControlSocket::DoClose(64) 08:21:18 Status: Resolving address of rbac.com 08:21:18 Status: Connecting to 208.68.104.122:21... 08:21:18 Status: Connection established, waiting for welcome message... 08:21:18 Trace: CFtpControlSocket::OnReceive() 08:21:18 Response: 220 192.168.30.26 FTP server ready 08:21:18 Trace: CFtpControlSocket::SendNextCommand() 08:21:18 Command: USER rbacinc 08:21:18 Trace: CFtpControlSocket::OnReceive() 08:21:18 Response: 331 Password required for rbacinc. 08:21:18 Trace: CFtpControlSocket::SendNextCommand() 08:21:18 Command: PASS 08:21:18 Trace: CFtpControlSocket::OnReceive() 08:21:18 Response: 230 User rbacinc logged in. 08:21:18 Status: Connected 08:21:18 Trace: CFtpControlSocket::ResetOperation(0) 08:21:18 Trace: CControlSocket::ResetOperation(0) 08:21:18 Trace: CFileZillaEnginePrivate::ResetOperation(0) 08:21:18 Trace: CFtpControlSocket::FileTransfer() 08:21:18 Status: Starting upload of F:\rbac db\2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:18 Trace: CFtpControlSocket::SendNextCommand() 08:21:18 Trace: CFtpControlSocket::ChangeDirSend() 08:21:18 Command: CWD /Viewpoints 08:21:19 Trace: CFtpControlSocket::OnReceive() 08:21:19 Response: 250 CWD command successful 08:21:19 Trace: CFtpControlSocket::ResetOperation(0) 08:21:19 Trace: CControlSocket::ResetOperation(0) 08:21:19 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:19 Trace: FileTransferSubcommandResult() 08:21:19 Status: Retrieving directory listing... 08:21:19 Trace: ftpcontrolsocket.cpp(1275): List called from other command caller=0p16d1950 08:21:19 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:19 Trace: CFtpControlSocket::ListSubcommandResult() 08:21:19 Trace: state = 1 08:21:19 Trace: CFtpControlSocket::SendNextCommand() 08:21:19 Trace: CFtpControlSocket::TransferSend() 08:21:19 Trace: state = 1 08:21:19 Command: TYPE I 08:21:19 Trace: CFtpControlSocket::OnReceive() 08:21:19 Response: 200 Type set to I 08:21:19 Trace: CFtpControlSocket::TransferParseResponse() 08:21:19 Trace: code = 2 08:21:19 Trace: state = 1 08:21:19 Trace: CFtpControlSocket::SendNextCommand() 08:21:19 Trace: CFtpControlSocket::TransferSend() 08:21:19 Trace: state = 2 08:21:19 Command: PASV 08:21:19 Trace: CFtpControlSocket::OnReceive() 08:21:19 Response: 227 Entering Passive Mode (208,68,104,122,150,46). 08:21:19 Trace: CFtpControlSocket::TransferParseResponse() 08:21:19 Trace: code = 2 08:21:19 Trace: state = 2 08:21:19 Trace: CFtpControlSocket::SendNextCommand() 08:21:19 Trace: CFtpControlSocket::TransferSend() 08:21:19 Trace: state = 4 08:21:19 Command: LIST 08:21:19 Trace: CTransferSocket::OnConnect 08:21:19 Trace: CTransferSocket::OnReceive(), m_transferMode=0 08:21:19 Trace: CFtpControlSocket::OnReceive() 08:21:19 Response: 150 Opening ASCII mode data connection for file list 08:21:19 Trace: CFtpControlSocket::TransferParseResponse() 08:21:19 Trace: code = 1 08:21:19 Trace: state = 4 08:21:19 Trace: CFtpControlSocket::SendNextCommand() 08:21:19 Trace: CFtpControlSocket::TransferSend() 08:21:19 Trace: state = 5 08:21:19 Trace: CTransferSocket::OnReceive(), m_transferMode=0 08:21:19 Trace: CTransferSocket::TransferEnd(1) 08:21:19 Trace: CFtpControlSocket::TransferEnd() 08:21:19 Trace: CFtpControlSocket::OnReceive() 08:21:19 Response: 226 Transfer complete. 08:21:19 Trace: CFtpControlSocket::TransferParseResponse() 08:21:19 Trace: code = 2 08:21:19 Trace: state = 7 08:21:19 Trace: CFtpControlSocket::ResetOperation(0) 08:21:19 Trace: CControlSocket::ResetOperation(0) 08:21:19 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:19 Trace: CFtpControlSocket::ListSubcommandResult() 08:21:19 Trace: state = 3 08:21:19 Trace: CFtpControlSocket::ResetOperation(0) 08:21:19 Trace: CControlSocket::ResetOperation(0) 08:21:19 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:19 Trace: FileTransferSubcommandResult() 08:21:31 Trace: CFtpControlSocket::SendNextCommand() 08:21:31 Trace: FileTransferSend() 08:21:31 Trace: CFtpControlSocket::SendNextCommand() 08:21:31 Trace: CFtpControlSocket::TransferSend() 08:21:31 Trace: state = 2 08:21:31 Command: PASV 08:21:31 Trace: CFtpControlSocket::OnReceive() 08:21:31 Response: 227 Entering Passive Mode (208,68,104,122,150,86). 08:21:31 Trace: CFtpControlSocket::TransferParseResponse() 08:21:31 Trace: code = 2 08:21:31 Trace: state = 2 08:21:31 Trace: CFtpControlSocket::SendNextCommand() 08:21:31 Trace: CFtpControlSocket::TransferSend() 08:21:31 Trace: state = 3 08:21:31 Command: REST 2147483647 08:21:31 Trace: CFtpControlSocket::OnReceive() 08:21:31 Response: 350 Restarting at 2147483647. Send STORE or RETRIEVE to initiate transfer 08:21:31 Trace: CFtpControlSocket::TransferParseResponse() 08:21:31 Trace: code = 3 08:21:31 Trace: state = 3 08:21:31 Trace: CFtpControlSocket::SendNextCommand() 08:21:31 Trace: CFtpControlSocket::TransferSend() 08:21:31 Trace: state = 4 08:21:31 Command: STOR 2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:32 Trace: CTransferSocket::OnConnect 08:21:32 Trace: First EAGAIN in CTransferSocket::OnSend() 08:21:32 Trace: CTransferSocket::OnReceive(), m_transferMode=1 08:21:32 Trace: CFtpControlSocket::OnReceive() 08:21:32 Response: 150 Opening BINARY mode data connection for 2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:32 Trace: CFtpControlSocket::TransferParseResponse() 08:21:32 Trace: code = 1 08:21:32 Trace: state = 4 08:21:32 Trace: CFtpControlSocket::SendNextCommand() 08:21:32 Trace: CFtpControlSocket::TransferSend() 08:21:32 Trace: state = 5 08:21:32 Trace: CRealControlSocket::OnClose(10053) 08:21:32 Error: Disconnected from server: ECONNABORTED - Connection aborted 08:21:32 Trace: CControlSocket::DoClose(64) 08:21:32 Trace: CFtpControlSocket::ResetOperation(66) 08:21:32 Trace: CControlSocket::ResetOperation(66) 08:21:32 Trace: CFtpControlSocket::ResetOperation(66) 08:21:32 Trace: CControlSocket::ResetOperation(66) 08:21:32 Trace: CFileZillaEnginePrivate::ResetOperation(66) 08:21:32 Trace: CControlSocket::DoClose(64) 08:21:32 Trace: CControlSocket::DoClose(64) 08:21:32 Status: Resolving address of rbac.com 08:21:32 Status: Connecting to 208.68.104.122:21... 08:21:32 Status: Connection established, waiting for welcome message... 08:21:32 Trace: CFtpControlSocket::OnReceive() 08:21:32 Response: 220 192.168.30.26 FTP server ready 08:21:32 Trace: CFtpControlSocket::SendNextCommand() 08:21:32 Command: USER rbacinc 08:21:32 Trace: CFtpControlSocket::OnReceive() 08:21:32 Response: 331 Password required for rbacinc. 08:21:32 Trace: CFtpControlSocket::SendNextCommand() 08:21:32 Command: PASS 08:21:32 Trace: CFtpControlSocket::OnReceive() 08:21:32 Response: 230 User rbacinc logged in. 08:21:32 Status: Connected 08:21:32 Trace: CFtpControlSocket::ResetOperation(0) 08:21:32 Trace: CControlSocket::ResetOperation(0) 08:21:32 Trace: CFileZillaEnginePrivate::ResetOperation(0) 08:21:32 Trace: CFtpControlSocket::FileTransfer() 08:21:32 Status: Starting upload of F:\rbac db\2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:32 Trace: CFtpControlSocket::SendNextCommand() 08:21:32 Trace: CFtpControlSocket::ChangeDirSend() 08:21:32 Command: CWD /Viewpoints 08:21:32 Trace: CFtpControlSocket::OnReceive() 08:21:32 Response: 250 CWD command successful 08:21:32 Trace: CFtpControlSocket::ResetOperation(0) 08:21:32 Trace: CControlSocket::ResetOperation(0) 08:21:32 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:32 Trace: FileTransferSubcommandResult() 08:21:32 Status: Retrieving directory listing... 08:21:32 Trace: ftpcontrolsocket.cpp(1275): List called from other command caller=0p16d1950 08:21:32 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:32 Trace: CFtpControlSocket::ListSubcommandResult() 08:21:32 Trace: state = 1 08:21:32 Trace: CFtpControlSocket::SendNextCommand() 08:21:32 Trace: CFtpControlSocket::TransferSend() 08:21:32 Trace: state = 1 08:21:32 Command: TYPE I 08:21:33 Trace: CFtpControlSocket::OnReceive() 08:21:33 Response: 200 Type set to I 08:21:33 Trace: CFtpControlSocket::TransferParseResponse() 08:21:33 Trace: code = 2 08:21:33 Trace: state = 1 08:21:33 Trace: CFtpControlSocket::SendNextCommand() 08:21:33 Trace: CFtpControlSocket::TransferSend() 08:21:33 Trace: state = 2 08:21:33 Command: PASV 08:21:33 Trace: CFtpControlSocket::OnReceive() 08:21:33 Response: 227 Entering Passive Mode (208,68,104,122,150,89). 08:21:33 Trace: CFtpControlSocket::TransferParseResponse() 08:21:33 Trace: code = 2 08:21:33 Trace: state = 2 08:21:33 Trace: CFtpControlSocket::SendNextCommand() 08:21:33 Trace: CFtpControlSocket::TransferSend() 08:21:33 Trace: state = 4 08:21:33 Command: LIST 08:21:33 Trace: CTransferSocket::OnConnect 08:21:33 Trace: CTransferSocket::OnReceive(), m_transferMode=0 08:21:33 Trace: CFtpControlSocket::OnReceive() 08:21:33 Response: 150 Opening ASCII mode data connection for file list 08:21:33 Trace: CFtpControlSocket::TransferParseResponse() 08:21:33 Trace: code = 1 08:21:33 Trace: state = 4 08:21:33 Trace: CFtpControlSocket::SendNextCommand() 08:21:33 Trace: CFtpControlSocket::TransferSend() 08:21:33 Trace: state = 5 08:21:33 Trace: CTransferSocket::OnReceive(), m_transferMode=0 08:21:33 Trace: CTransferSocket::TransferEnd(1) 08:21:33 Trace: CFtpControlSocket::TransferEnd() 08:21:33 Trace: CFtpControlSocket::OnReceive() 08:21:33 Response: 226 Transfer complete. 08:21:33 Trace: CFtpControlSocket::TransferParseResponse() 08:21:33 Trace: code = 2 08:21:33 Trace: state = 7 08:21:33 Trace: CFtpControlSocket::ResetOperation(0) 08:21:33 Trace: CControlSocket::ResetOperation(0) 08:21:33 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:33 Trace: CFtpControlSocket::ListSubcommandResult() 08:21:33 Trace: state = 3 08:21:33 Trace: CFtpControlSocket::ResetOperation(0) 08:21:33 Trace: CControlSocket::ResetOperation(0) 08:21:33 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:33 Trace: FileTransferSubcommandResult() 08:21:33 Trace: CFtpControlSocket::SendNextCommand() 08:21:33 Trace: FileTransferSend() 08:21:33 Trace: CFtpControlSocket::SendNextCommand() 08:21:33 Trace: CFtpControlSocket::TransferSend() 08:21:33 Trace: state = 2 08:21:33 Command: PASV 08:21:33 Trace: CFtpControlSocket::OnReceive() 08:21:33 Response: 227 Entering Passive Mode (208,68,104,122,150,91). 08:21:33 Trace: CFtpControlSocket::TransferParseResponse() 08:21:33 Trace: code = 2 08:21:33 Trace: state = 2 08:21:33 Trace: CFtpControlSocket::SendNextCommand() 08:21:33 Trace: CFtpControlSocket::TransferSend() 08:21:33 Trace: state = 3 08:21:33 Command: REST 2147483647 08:21:33 Trace: CFtpControlSocket::OnReceive() 08:21:33 Response: 350 Restarting at 2147483647. Send STORE or RETRIEVE to initiate transfer 08:21:33 Trace: CFtpControlSocket::TransferParseResponse() 08:21:33 Trace: code = 3 08:21:33 Trace: state = 3 08:21:33 Trace: CFtpControlSocket::SendNextCommand() 08:21:33 Trace: CFtpControlSocket::TransferSend() 08:21:33 Trace: state = 4 08:21:33 Command: STOR 2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:33 Trace: CTransferSocket::OnConnect 08:21:33 Trace: First EAGAIN in CTransferSocket::OnSend() 08:21:33 Trace: CTransferSocket::OnReceive(), m_transferMode=1 08:21:34 Trace: CFtpControlSocket::OnReceive() 08:21:34 Response: 150 Opening BINARY mode data connection for 2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:34 Trace: CFtpControlSocket::TransferParseResponse() 08:21:34 Trace: code = 1 08:21:34 Trace: state = 4 08:21:34 Trace: CFtpControlSocket::SendNextCommand() 08:21:34 Trace: CFtpControlSocket::TransferSend() 08:21:34 Trace: state = 5 08:21:34 Trace: CRealControlSocket::OnClose(10053) 08:21:34 Error: Disconnected from server: ECONNABORTED - Connection aborted 08:21:34 Trace: CControlSocket::DoClose(64) 08:21:34 Trace: CFtpControlSocket::ResetOperation(66) 08:21:34 Trace: CControlSocket::ResetOperation(66) 08:21:34 Trace: CFtpControlSocket::ResetOperation(66) 08:21:34 Trace: CControlSocket::ResetOperation(66) 08:21:34 Trace: CFileZillaEnginePrivate::ResetOperation(66) 08:21:34 Trace: CControlSocket::DoClose(64) 08:21:34 Trace: CControlSocket::DoClose(64) 08:21:34 Status: Resolving address of rbac.com 08:21:34 Status: Connecting to 208.68.104.122:21... 08:21:34 Status: Connection established, waiting for welcome message... 08:21:34 Trace: CFtpControlSocket::OnReceive() 08:21:34 Response: 220 192.168.30.26 FTP server ready 08:21:34 Trace: CFtpControlSocket::SendNextCommand() 08:21:34 Command: USER rbacinc 08:21:34 Trace: CFtpControlSocket::OnReceive() 08:21:34 Response: 331 Password required for rbacinc. 08:21:34 Trace: CFtpControlSocket::SendNextCommand() 08:21:34 Command: PASS 08:21:34 Trace: CFtpControlSocket::OnReceive() 08:21:34 Response: 230 User rbacinc logged in. 08:21:34 Status: Connected 08:21:34 Trace: CFtpControlSocket::ResetOperation(0) 08:21:34 Trace: CControlSocket::ResetOperation(0) 08:21:34 Trace: CFileZillaEnginePrivate::ResetOperation(0) 08:21:34 Trace: CFtpControlSocket::FileTransfer() 08:21:34 Status: Starting upload of F:\rbac db\2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:34 Trace: CFtpControlSocket::SendNextCommand() 08:21:34 Trace: CFtpControlSocket::ChangeDirSend() 08:21:34 Command: CWD /Viewpoints 08:21:34 Trace: CFtpControlSocket::OnReceive() 08:21:34 Response: 250 CWD command successful 08:21:34 Trace: CFtpControlSocket::ResetOperation(0) 08:21:34 Trace: CControlSocket::ResetOperation(0) 08:21:34 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:34 Trace: FileTransferSubcommandResult() 08:21:34 Status: Retrieving directory listing... 08:21:34 Trace: ftpcontrolsocket.cpp(1275): List called from other command caller=0p16d1950 08:21:34 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:34 Trace: CFtpControlSocket::ListSubcommandResult() 08:21:34 Trace: state = 1 08:21:34 Trace: CFtpControlSocket::SendNextCommand() 08:21:34 Trace: CFtpControlSocket::TransferSend() 08:21:34 Trace: state = 1 08:21:34 Command: TYPE I 08:21:35 Trace: CFtpControlSocket::OnReceive() 08:21:35 Response: 200 Type set to I 08:21:35 Trace: CFtpControlSocket::TransferParseResponse() 08:21:35 Trace: code = 2 08:21:35 Trace: state = 1 08:21:35 Trace: CFtpControlSocket::SendNextCommand() 08:21:35 Trace: CFtpControlSocket::TransferSend() 08:21:35 Trace: state = 2 08:21:35 Command: PASV 08:21:35 Trace: CFtpControlSocket::OnReceive() 08:21:35 Response: 227 Entering Passive Mode (208,68,104,122,150,101). 08:21:35 Trace: CFtpControlSocket::TransferParseResponse() 08:21:35 Trace: code = 2 08:21:35 Trace: state = 2 08:21:35 Trace: CFtpControlSocket::SendNextCommand() 08:21:35 Trace: CFtpControlSocket::TransferSend() 08:21:35 Trace: state = 4 08:21:35 Command: LIST 08:21:35 Trace: CTransferSocket::OnConnect 08:21:35 Trace: CTransferSocket::OnReceive(), m_transferMode=0 08:21:35 Trace: CFtpControlSocket::OnReceive() 08:21:35 Response: 150 Opening ASCII mode data connection for file list 08:21:35 Trace: CFtpControlSocket::TransferParseResponse() 08:21:35 Trace: code = 1 08:21:35 Trace: state = 4 08:21:35 Trace: CFtpControlSocket::SendNextCommand() 08:21:35 Trace: CFtpControlSocket::TransferSend() 08:21:35 Trace: state = 5 08:21:35 Trace: CTransferSocket::OnReceive(), m_transferMode=0 08:21:35 Trace: CTransferSocket::TransferEnd(1) 08:21:35 Trace: CFtpControlSocket::TransferEnd() 08:21:35 Trace: CFtpControlSocket::OnReceive() 08:21:35 Response: 226 Transfer complete. 08:21:35 Trace: CFtpControlSocket::TransferParseResponse() 08:21:35 Trace: code = 2 08:21:35 Trace: state = 7 08:21:35 Trace: CFtpControlSocket::ResetOperation(0) 08:21:35 Trace: CControlSocket::ResetOperation(0) 08:21:35 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:35 Trace: CFtpControlSocket::ListSubcommandResult() 08:21:35 Trace: state = 3 08:21:35 Trace: CFtpControlSocket::ResetOperation(0) 08:21:35 Trace: CControlSocket::ResetOperation(0) 08:21:35 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:35 Trace: FileTransferSubcommandResult() 08:21:35 Trace: CFtpControlSocket::SendNextCommand() 08:21:35 Trace: FileTransferSend() 08:21:35 Trace: CFtpControlSocket::SendNextCommand() 08:21:35 Trace: CFtpControlSocket::TransferSend() 08:21:35 Trace: state = 2 08:21:35 Command: PASV 08:21:35 Trace: CFtpControlSocket::OnReceive() 08:21:35 Response: 227 Entering Passive Mode (208,68,104,122,150,102). 08:21:35 Trace: CFtpControlSocket::TransferParseResponse() 08:21:35 Trace: code = 2 08:21:35 Trace: state = 2 08:21:35 Trace: CFtpControlSocket::SendNextCommand() 08:21:35 Trace: CFtpControlSocket::TransferSend() 08:21:35 Trace: state = 3 08:21:35 Command: REST 2147483647 08:21:35 Trace: CFtpControlSocket::OnReceive() 08:21:35 Response: 350 Restarting at 2147483647. Send STORE or RETRIEVE to initiate transfer 08:21:35 Trace: CFtpControlSocket::TransferParseResponse() 08:21:35 Trace: code = 3 08:21:35 Trace: state = 3 08:21:35 Trace: CFtpControlSocket::SendNextCommand() 08:21:35 Trace: CFtpControlSocket::TransferSend() 08:21:35 Trace: state = 4 08:21:35 Command: STOR 2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:36 Trace: CTransferSocket::OnConnect 08:21:36 Trace: First EAGAIN in CTransferSocket::OnSend() 08:21:36 Trace: CTransferSocket::OnReceive(), m_transferMode=1 08:21:36 Trace: CFtpControlSocket::OnReceive() 08:21:36 Response: 150 Opening BINARY mode data connection for 2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:36 Trace: CFtpControlSocket::TransferParseResponse() 08:21:36 Trace: code = 1 08:21:36 Trace: state = 4 08:21:36 Trace: CFtpControlSocket::SendNextCommand() 08:21:36 Trace: CFtpControlSocket::TransferSend() 08:21:36 Trace: state = 5 08:21:36 Trace: CRealControlSocket::OnClose(10053) 08:21:36 Error: Disconnected from server: ECONNABORTED - Connection aborted 08:21:36 Trace: CControlSocket::DoClose(64) 08:21:36 Trace: CFtpControlSocket::ResetOperation(66) 08:21:36 Trace: CControlSocket::ResetOperation(66) 08:21:36 Trace: CFtpControlSocket::ResetOperation(66) 08:21:36 Trace: CControlSocket::ResetOperation(66) 08:21:36 Trace: CFileZillaEnginePrivate::ResetOperation(66) 08:21:36 Trace: CControlSocket::DoClose(64) 08:21:36 Trace: CControlSocket::DoClose(64) 08:21:36 Status: Resolving address of rbac.com 08:21:36 Status: Connecting to 208.68.104.122:21... 08:21:36 Status: Connection established, waiting for welcome message... 08:21:36 Trace: CFtpControlSocket::OnReceive() 08:21:36 Response: 220 192.168.30.26 FTP server ready 08:21:36 Trace: CFtpControlSocket::SendNextCommand() 08:21:36 Command: USER rbacinc 08:21:36 Trace: CFtpControlSocket::OnReceive() 08:21:36 Response: 331 Password required for rbacinc. 08:21:36 Trace: CFtpControlSocket::SendNextCommand() 08:21:36 Command: PASS 08:21:36 Trace: CFtpControlSocket::OnReceive() 08:21:36 Response: 230 User rbacinc logged in. 08:21:36 Status: Connected 08:21:36 Trace: CFtpControlSocket::ResetOperation(0) 08:21:36 Trace: CControlSocket::ResetOperation(0) 08:21:36 Trace: CFileZillaEnginePrivate::ResetOperation(0) 08:21:36 Trace: CFtpControlSocket::FileTransfer() 08:21:36 Status: Starting upload of F:\rbac db\2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:36 Trace: CFtpControlSocket::SendNextCommand() 08:21:36 Trace: CFtpControlSocket::ChangeDirSend() 08:21:36 Command: CWD /Viewpoints 08:21:36 Trace: CFtpControlSocket::OnReceive() 08:21:36 Response: 250 CWD command successful 08:21:36 Trace: CFtpControlSocket::ResetOperation(0) 08:21:36 Trace: CControlSocket::ResetOperation(0) 08:21:36 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:36 Trace: FileTransferSubcommandResult() 08:21:36 Status: Retrieving directory listing... 08:21:36 Trace: ftpcontrolsocket.cpp(1275): List called from other command caller=0p16d1950 08:21:36 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:36 Trace: CFtpControlSocket::ListSubcommandResult() 08:21:36 Trace: state = 1 08:21:36 Trace: CFtpControlSocket::SendNextCommand() 08:21:36 Trace: CFtpControlSocket::TransferSend() 08:21:36 Trace: state = 1 08:21:36 Command: TYPE I 08:21:37 Trace: CFtpControlSocket::OnReceive() 08:21:37 Response: 200 Type set to I 08:21:37 Trace: CFtpControlSocket::TransferParseResponse() 08:21:37 Trace: code = 2 08:21:37 Trace: state = 1 08:21:37 Trace: CFtpControlSocket::SendNextCommand() 08:21:37 Trace: CFtpControlSocket::TransferSend() 08:21:37 Trace: state = 2 08:21:37 Command: PASV 08:21:37 Trace: CFtpControlSocket::OnReceive() 08:21:37 Response: 227 Entering Passive Mode (208,68,104,122,150,105). 08:21:37 Trace: CFtpControlSocket::TransferParseResponse() 08:21:37 Trace: code = 2 08:21:37 Trace: state = 2 08:21:37 Trace: CFtpControlSocket::SendNextCommand() 08:21:37 Trace: CFtpControlSocket::TransferSend() 08:21:37 Trace: state = 4 08:21:37 Command: LIST 08:21:37 Trace: CTransferSocket::OnConnect 08:21:37 Trace: CTransferSocket::OnReceive(), m_transferMode=0 08:21:37 Trace: CFtpControlSocket::OnReceive() 08:21:37 Response: 150 Opening ASCII mode data connection for file list 08:21:37 Trace: CFtpControlSocket::TransferParseResponse() 08:21:37 Trace: code = 1 08:21:37 Trace: state = 4 08:21:37 Trace: CFtpControlSocket::SendNextCommand() 08:21:37 Trace: CFtpControlSocket::TransferSend() 08:21:37 Trace: state = 5 08:21:37 Trace: CTransferSocket::OnReceive(), m_transferMode=0 08:21:37 Trace: CTransferSocket::TransferEnd(1) 08:21:37 Trace: CFtpControlSocket::TransferEnd() 08:21:37 Trace: CFtpControlSocket::OnReceive() 08:21:37 Response: 226 Transfer complete. 08:21:37 Trace: CFtpControlSocket::TransferParseResponse() 08:21:37 Trace: code = 2 08:21:37 Trace: state = 7 08:21:37 Trace: CFtpControlSocket::ResetOperation(0) 08:21:37 Trace: CControlSocket::ResetOperation(0) 08:21:37 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:37 Trace: CFtpControlSocket::ListSubcommandResult() 08:21:37 Trace: state = 3 08:21:37 Trace: CFtpControlSocket::ResetOperation(0) 08:21:37 Trace: CControlSocket::ResetOperation(0) 08:21:37 Trace: CFtpControlSocket::ParseSubcommandResult(0) 08:21:37 Trace: FileTransferSubcommandResult() 08:21:40 Status: Skipping upload of F:\rbac db\2010-02-08 RbacBaseCase 09q4Base complete.bak 08:21:40 Trace: CFtpControlSocket::ResetOperation(0) 08:21:40 Trace: CControlSocket::ResetOperation(0) 08:21:40 Status: File transfer successful 08:21:40 Trace: CFileZillaEnginePrivate::ResetOperation(0) 08:21:40 Trace: CFileZillaEnginePrivate::ResetOperation(0) 08:22:40 Status: Disconnected from server 08:22:40 Trace: CControlSocket::DoClose(64) 08:22:40 Trace: CFtpControlSocket::ResetOperation(66) 08:22:40 Trace: CControlSocket::ResetOperation(66) 08:22:40 Trace: CFileZillaEnginePrivate::ResetOperation(66) 08:22:40 Trace: CControlSocket::DoClose(64) 08:22:40 Trace: CControlSocket::DoClose(64) 08:22:40 Trace: CFileZillaEnginePrivate::ResetOperation(0)

Uploading a 16GB file to my FTP in the local LAN (vsftpd on debian stable) ends up with a different file size than the original (tried twice, once smaller and once larger than the original) as a consequence the MD5 is different too and the file unusable.

Please add a menu pull-down that has a list of saved connections so they can be re-established by the click of a menu choice. This would basically be an extension of teh Reconnect function, only giving some choices of recent connections.

I am in customer service and frequently have to revisit FTP sites/directories 3 or 4 times per day, with other connections in between to archive customer data. I may be working with several customers during a day and collecting debugging data from each one, sometimes more than one time during the day. It is time consuming to have to drill down through the same directory tree over and over again.

You already have the technology. The Reconnect function is great. It just needs to be expanded to give choices of several recent connections.

I have no suggestion for how many connections to remember. Ten or twelve might be enough for me, I haven't thought that far ahead.

Thinking more about design suggestions, comparing for duplicates and not saving them would be good, too.

In my case, I would need to see more than the FTP server name because I connect to the same archive server for each customer, but the session is unique by the connected directory, which your reconnect function does save.

Then how or when would the list be purged? Roll out the oldest entry when the maximum for the list is reached? User can purge at any time?

You folks have designed a very nice tool in Filezilla. I'm sure you can come up with a great design for this added function.

Thanks for considering my idea. John

This has been ticketed as feature requests before under ​http://trac.filezilla-project.org/ticket/1878 but I think it is a bug.

On returning to parent directory FileZilla jumps to the first entry on the file list but should stay on the folder just exited.

See standard file browser apps how to behave. Navigating with keyboard is essential in a utility like this.

Regs, Zsolt.