Custom Query (10426 matches)

filezilla breaks off the connection when I try to upload files to zymic

Hello, until the latest version (3.3.4.1) everything always went "smooth" without problems... with this latest version now 1 or 2 files out of a group of around 7 to 10 or more images do not transfer... they stop at some random % and don't transfer after restarting FZ, selecting the file(s) that was/were not transferred and "re-transferring" it/them, it works... happens every time and it's kinda frustrating i have not changed any settings, only change was updating to the latest version below the info about my version (MAC)

FileZilla Client

Version: 3.3.4.1

Build information:

Compiled for: i686-apple-darwin9 Compiled on: i386-apple-darwin9.8.0 Build date: 2010-08-15 Compiled with: i686-apple-darwin9-gcc-4.0.1 (GCC) 4.0.1 (Apple Inc. build 5465) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.11 GnuTLS: 2.8.3

Operating system:

Name: Mac OS X (Darwin 9.8.0 i386) Version: 16.88

since 11/02/10 I can not upload any file to my directory. when I attempt to upload the file gives me an overwrite prompt. I select overwrite and the file name goes to the directory with "0" file size uploaded.

Option to run only single instance of FileZilla.

system-date: FileZilla Client

Version: 3.3.4.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2010-08-16 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.11 GnuTLS: 2.8.3

Operating system:

Name: Windows NT 6.1 (build 7600) Version: 6.1 Platform: 64 bit system

You are updating automaticly, so I think these data are correct.

Bug: 1. using a transfer of .gif or .jpg, Filezilla is sometimes forgotten it should be binary, so it transfers as a ascii file, result no image displaying. Nevertheless : these are not registered as ascii . 2. I use very often csv files ( comma seperated values = textfile ), can be dot csv , can be dot tsv or something else. Both are registered as transfer like ascii. Nevertheless : the software wants to transfer binary.

Would be very nice, to solve this problem.

I think that here you should implement a way to manually enter which IP addresses should be considered as local connections. I have hosts from outside that are behind NAT and I am behind NAT too, so i will need to manually enter which IP's should be consider as local which should be consider as outside in order the passive mode to be correct for the external host and for the internal hosts. I have internal hosts that have IP's like 172.11 and etc that FileZilla interprets as external!???

I my case i have a 2 hosts that should be considered as external and only for them i will need the PASV mode - static IP to be set under: External server IP addresses for passive mode transfers: "Use the following IP (X.X.X.X)

I hope you understand my request.

If you have the directory tree enabled, the address bar is cramped into the space above that pane instead of spread across the two panes.

It's impossible to choose another directory because the dropdown cuts everything off after one or two levels. See attached.

Environment: Windows Server 2008 Standard

FileZilla Server v0.9.37beta

Creating user accounts with the following structure:

Parent (Home) folder with Read File rights and List Directories & Subs Child Folder 1 (Files from client) w/ R/W/D File rights & List Dir/Subs Child Folder 2 (Files to client) w/ R File rights only and List Dir/Subs

In this configuration, a 550 error is generated on child folder 1 when the client tries to upload or delete a file

However, if the Parent folder has the Write and Delete attributes set, the client can write and delete files.. but in BOTH child folders, not just child folder 1.

Which tells me that there is a permissions issue in the server daemon. Based on a simple file permission model, I should be able to set the parent directory to allow only reads and directory listings, and then set my child folder permissions to the task they hold (i.e. writes only allowed in the folder I chose based on the granted permissions).

Note - all file paths are short, do not include spaces or special characters and are being accessed directly (not via a network share) if that helps...

I can't seem to find anything in the general server configuration that would cause this to break.. or.. is this working as according to design?

Hello, After connecting to a FTP-Server i have grafic errors on "quick-connect tab". All buttons are gone and i can watch in between all protokoll data. Please have a look at the screenshot. It should explain the error. Hope you can fix it ... .

filezilla server disconnected continuously when i try to upload files.When i checked the log folder of filezilla server,it contains large number of files.So i remove the log files and restart the filezilla service.After this it works fine for some time and disconnected again.I delete the log file again and then it works fine.

Anyone can suggest a permanent solution for this.

when i choose to edit file and save it, i get a message in filezilla that asks me if i want to upload it. i would like to have the option in setting menu to make filezilla upload the file instantly without asking me. thanks

I'm connecting to a sftp service I've created.

the directory is empty but it should have some files in.

My config is the same than a previous one, except ACL.

here is the debug log, showing that filezilla receive a good response from the command ls :

Statut : Récupération du contenu du dossier... Trace : CSftpControlSocket::ParseSubcommandResult(0) Trace : CSftpControlSocket::ListSubcommandResult() Trace : CSftpControlSocket::SendNextCommand() Trace : CSftpControlSocket::ListSend() Commande : ls Statut : Listing directory /home/TAO/dmagniez Contenu : drwxrwx--T 9 root root 4096 Nov 22 14:37 .. Contenu : drwx------ 2 dmagniez utilisa. du domaine 4096 Nov 22 15:10 .ssh Contenu : drwxr-x--- 4 dmagniez utilisa. du domaine 4096 Nov 22 15:10 . Contenu : -rwxr-x--- 1 dmagniez utilisa. du domaine 0 Nov 22 14:57 Nouveau document texte.txt Contenu : drwxr-x--- 2 dmagniez utilisa. du domaine 4096 Nov 22 15:05 Nouveau dossier Trace : CSftpControlSocket::ListParseResponse() Trace : CSftpControlSocket::ResetOperation(0) Trace : CControlSocket::ResetOperation(0) Statut : Succès de la lecture du contenu du dossier

but nothing appear.

file right seems to be good : dmagniez@LINUXTAO:~> getfacl /home/TAO/dmagniez/ getfacl: Removing leading '/' from absolute path names # file: home/TAO/dmagniez/ # owner: dmagniez # group: utilisa.\040du\040domaine user::rwx user:other_user1:r-x group::--x group:g_ftp:--x mask::r-x other::--- default:user::rwx default:user:other_user1:r-x default:group::--x default:group:g_ftp:--x default:mask::r-x default:other::---

sftp command in localhost linux :

sftp> ls Nouveau document texte.txt Nouveau dossier

I need to provide putty private key (.ppk ) and also a passphrase to login to my ssh server. But filezilla do not accept private key file. Please add it.

Wow! What a list of feature requests. Well this one is certainly not life and death!

It would be a nice feature to add 'Copy Filename to Clipboard' to the right-click popup menu for files in the processing queue.

When attempting to delete a symbolic link on a linux server, filezilla 3.3.5.1 deletes the content of the directory pointed by the symbolic link links to and does not delete the symbolic link itself.

Tbhis is totally unexpected : FileZilla acts the opposite of the rm command.

The expected behaviour is to have the rm command equivalent :

When deleting a symbolic link, it should just delete the symbolic link.

Hi,

I've been using FileZilla for years now but lately I have to move to another FTP Client due to some issues I'm having.

FileZilla version: 3.3.5.1. Processor: AMD Phenom 8450 Triple-Core Processor 2.10 GHz RAM: 2GB System:Windows 7 Ultimate 32 bits.

I am a freelancer, web developer, basically using Flash, PHP and MySql. Daily, I need to upload/download files from my Server or my Clients.

After testing my applications in my local environment I upload it to my Server for a remote testing and allowing my Clients check work evolution and suggest corrections, changes, etc.

Since last week I started to have issues after uploading files to my Server:

a) although all files were uploaded properly, with no error messages and all of them being in its proper folder, application refused to work as it was working in my local environment.

b) I observed that some files were having different size in my disk than in my Server. Since I have moved recently to a new WebHosting (Linux) I thought this could be due to a different method Linux had to calculate the space on disk, I don't know.

c) some files, although displaying the same size in my disk than in my Server what lead to think it had been properly uploaded, when testing they refused to be loaded. This was easily detected with Flash movies (most of them forms) and graphics, simple graphics like backgrounds or headers (.png and .jpg). All of them small to middle file sizes (2KB - 200KB). FileZilla showed the files were in their proper folder, Server's FileManager application also showed that the file was in its proper location, Browser's "Source View" feature showed that the file/s were been called at the right places but the file/s didn't show up in the browser.

d) Tracking the application step by step (logically, not with a debugger because the app was not able to start the debugger, the application didn't start at all!) I could detect that some text files were having weird content merged with the actual content (attached you will find one of the files snapshot). I really cannot say about other files content (like Flash or graphic files) since I'm not able to read their contents as one can do with a text file. But those text files, definitely had a different content than its corresponding in my local environment.

e) trying to upload those files once and again (using auto, ASCII or binary) did not show any change: always the same weird content merged with the actual content (black diamonds with a question mark inside).

I talked to my Server's support staff (InMotion) and they could not explain me what could this be due to. And I can't remember where these guys or IXWebHosting support guys (my former Server) that suggested this could be due to a FileZilla misfunction. I refused to accept their suggestion but, just in case, I downloaded another free FTP Client (Core FTP Lite) and the same files and directories were uploaded once again with successful results: no file was missing, no size was different and all files content (texts, graphics, flash, databases, etc) were exactly the same than in my local environment.

I have been searching in previous reports of similar issues and couldn't find any similar to mine; then, I cannot understand what weird configuration should I have that may be causing this deformation.

Since I love FileZilla, I feel very confident with it and very familiar with all its features after using it for so many years, I feel very extrange using any other FTP Client and would like to return to use FileZilla as I used to in the past.

I would appreciate any suggestion/s you could give me and if you need further explanation, questions or whatever, please, do not hesitate to let me know.

Best regards, Lautaro.

When I double-click (or choose "open") on a ".doc" file in Windows explorer, it opens in MS Word.

In Filezilla, if I choose "open" or "edit" on the same (local) file it opens Wordpad. Wordpad it the second application in my "open with..." menu.

The same happens with other extentions: source code which opens with notepad, etc.

FileZilla should use the default/first application associated with the "open" action.

When I open the program, the title bar is too far into the mac os program bar, that none of the icons are visible in 16x16 mode, nor is the window able to be moved.

When connecting Filezilla with my FTPServer I can download all files, but I can't upload new ones or delete them. by pressing the delete botton it asks me if I want to delete but after clicking "yes" and refreshing the files are still there. When selecting a file to upload and clicking the "upload" botton nothing happens. I use FileZilla client version 3.3.5.1 and no antivirus or firewall is running.

When issuing the following command for example:

start filezilla ​sftp://sfl_support_admin:m4cew1ndu@10.240.1.50/paul mannion

I get the following error: "Unexpected parameter mannion"

It works fine for directory paths with no spaces. Any help gratefully appreciated.

Regards, Paul.

I am using the FileZilla Server for this and the server is online.

Status: Resolving address of ftp.trac.filezilla-project.org Status: Connecting to 213.239.222.5:21... Status: Connection established, waiting for welcome message... Response: 220 FZ router and firewall tester ready Command: USER Jennifer Ng Response: 331 Give any password. Command: PASS Response: 230 logged on. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 500 invalid command, goodbye! Error: Failed to retrieve directory listing Error: Could not read from socket: ECONNRESET - Connection reset by peer Error: Disconnected from server

I already made a home directory for it.

May I know how to make the correct directory?

I need to use this for my online shop so I put my priority of the report as high.

Thanks a million and sorry for the inconvience caused. <:# )~

I am using the FileZilla Server for this and the server is online.

Status: Resolving address of ftp.trac.filezilla-project.org Status: Connecting to 213.239.222.5:21... Status: Connection established, waiting for welcome message... Response: 220 FZ router and firewall tester ready Command: USER Jennifer Ng Response: 331 Give any password. Command: PASS Response: 230 logged on. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 500 invalid command, goodbye! Error: Failed to retrieve directory listing Error: Could not read from socket: ECONNRESET - Connection reset by peer Error: Disconnected from server

I already made a home directory for it.

May I know how to make the correct directory?

I need to use this for my online shop so I put my priority of the report as high.

Thanks a million and sorry for the inconvience caused. <:3 )~

I have

1. FileZilla-server on windows XP
2. default linux ftp-client (ftp) on Ubuntu 9.10
3. Some text files and zip-archives on Ubuntu-computer (for examlple "data.txt" is text file)

To look the problem: on Ubuntu-computer

$ ls -l data.txt

-rw-r--r-- 1 root root 274981544 2010-09-27 12:34 data.txt

$ ftp 192.168.3.20

Connected to 192.168.3.20. 220-FileZilla Server version 0.9.37 beta 220-written by Tim Kosse (Tim.Kosse@…) 220 Please visit ​http://sourceforge.net/projects/filezilla/ Name (192.168.3.20:user): anonymous Password: 230 Logged on Remote system type is UNIX.

ftp> put data.txt

local: data.txt remote: data.txt 200 Port command successful 150 Opening data channel for file transfer. 226 Transfer OK 275173412 bytes sent in 24.86 secs (10809.4 kB/s)

275173412! not 274981544. if we download this file from ftp-server back and compare with original by "diff", we'll see non-printed char

^M

on the end of each line.

I've tried to copy files on Xlight FTP-server (on Windows) and proftp-server (on Linux) - it was ok (size of file and its content was not changed). Copy by smb-protocol is ok too;

General problem is uploading zip-archives. They often become damaged and can't be unzip.

Upload from Windows to Windows has no problem.

I have the latest version of Filezilla for Mac and am using Mac OS 10.5.8.

The problem is that the top of the Filezilla window is stuck under the Macs menu bar so I can't move the Filezilla window to a different location on my screen.

I took a screenshot of it but don't see anywhere here to attach it so you can see it.

Thanks

TAKES THE PASSWORD BUT DOES NOT SEND TO SERVER.

ANYTHING OVER 99 CHARS AND I CAN AUTHENTICATE.

Trace: Pageant is running. Requesting keys. Trace: Pageant has 0 SSH-2 keys Command: Pass: Trace: Sent password Trace: Access denied Error: Authentication failed.

WORKS WHEN I CHANGE LENGTH OF PASSWORD

On the left panel I have opened files from my PC, on the right panel I have FTP files from server.

When I change or rename any files in my PC with my HTML editor and save them back on my PC, the files on the left panel in Filezilla remains unchanged as they were before - with old filename and not ordered by date of change untill I refresh the panel. I need to reopen my directory in filezilla or refresh to see the changed files.

Is it possible to sort the files automatically when they are changed? For example Total Commander works with automatic refresh - when I change any file, the file is automatically changed on opened list too.

Response: 234 AUTH command OK. Initializing TLS mode Status: Initializing TLS... Error: GnuTLS error -9: A TLS packet with unexpected length was received. Status: Server did not properly shut down TLS connection Error: Could not connect to server Status: Waiting to retry...

Today i have encountered a critical error while trying to fetch file that was starting with spacebar. It totally forbids me from downloading the files as server response 550 - file not exists.

Hello,

I'm trying to connect a Canon 1D Mk III camera using a WFTE2a wireless file transmitter to my PC on Windows 7, Filezilla Server ver 0.9.37

I've set up a user and in 'Account Settings' I have the 'Password' box ticked (wont let me have a blank password).

Each time I change the password and click OK then go back into Account Settings the password has changes to a 32 digit password (I didn't set this password)

When I try and connect through the camera I get error 45 which suggests its a User Name or Password Error. As I don't know what the 32 digit password is and I can't replace it I'm getting no where.

Please help

Steve

I have a PC running Windows and an Intel iMac running Leopard (10.5.8) which is bound to Active Directory for user authentication. SSH was enabled via the "Sharing" Preference Pane (aka Remote Login). When I use FileZilla to SFTP into the Mac, it incorrectly parses the folder and file names. Specifically, the "Group" name seems to be throwing it off. I've attached an example of what I see in the File and Folder panes in FileZilla. If I attempt to double-click on, say, the Desktop folder to open it I get:

Error: "Directory /Users/hunters/advanced administrators     1054 Mar  1 14:01 Desktop: no such file or directory".

I can provide more information if it helps. Have also verified that the Mac version of Filezilla client also has this bug.

Showing TOTAL progress on the windows 7 taskbar would be very handy..

Version: 3.3.5.1 64bit Windows 7 64bit with Intel Core i5 processor

If you turn on synchronized browsing with the above setup, the message log shows through the upper area of FileZilla (ie, the menu, search box, etc).

Good Day All:

I am finding that these icons (Open Site Manager, etc.) keep disappearing when moving in and out of the Filezilla windows. They only reappear when I mouse over where they used to be. Is there any way to make them stay visible continuously? Thanks!

I have a customer that has spaces in their user groups (why, because they can). FileZilla Client does not dislplay any filenames where the user group has spaces in it. If I chomd the files with a user group that does not have a space, the files list in the FileZilla client.

Could you place a box in each local/remote panes to search in displayed files and folders? Like Firefox search box that searches in folder tree (that are displayed) and highlights matched files in tree

If you are panning of setting up your own business, then you have to know that the right financing can make or break your business venture. And one way that you can secure that kind of financing for your business is by way of the ​short term loans. Loans like these are made for the purpose of helping a business stay afloat until the time will come that it will be able to stand on its own finances and without any help from any lending terms.

However, it would not be the lender who will come to your side and offer you the ​short term loans that they have. It is the other way around and you will have to be determined enough to find the right establishment that can give you the loaning terms that will help support your business and at the same offer a short term loan that you can pay back easily when the right time comes.

In some cases a private key file (ppk) cannot be loaded from the file system to be used for SFTP authentification.

This happens when the ppk file name or the path to the ppk file have special characters like German Umlauts.

Whether the ppk file name is provided by the FileZilla or PuTTY settings is irrelevant.

Only exception: If 'iso-8859-1' is set as the charset of a connection in the Site Manager, the ppk file name is interpreted correctly.

Corresponding log output:

Trace:	CControlSocket::DoClose(64)
Trace:	CControlSocket::DoClose(64)
Status:	Connecting to myserver...
Trace:	Going to execute "C:\Program Files (x86)\FileZilla FTP Client\fzsftp.exe"
Response:	fzSftp started
Trace:	CSftpControlSocket::ConnectParseResponse(fzSftp started)
Trace:	CSftpControlSocket::SendNextCommand()
Trace:	CSftpControlSocket::ConnectSend()
Command:	open "myuser@myserver" 22
Trace:	Looking up host "myserver"
Trace:	Connecting to 1xx.1xx.1x.x port 22
Trace:	Server version: SSH-2.0-Sun_SSH_1.1.3
Trace:	Using SSH protocol version 2
Trace:	We claim version: SSH-2.0-PuTTY_Local:_Mar_27_2011_22:10:31
Trace:	Doing Diffie-Hellman group exchange
Trace:	Doing Diffie-Hellman key exchange with hash SHA-1
Trace:	Host key fingerprint is:
Trace:	ssh-rsa 1024 xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx
Trace:	Initialised AES-256 SDCTR client->server encryption
Trace:	Initialised HMAC-SHA1 client->server MAC algorithm
Trace:	Initialised AES-256 SDCTR server->client encryption
Trace:	Initialised HMAC-SHA1 server->client MAC algorithm
Trace:	Reading private key file "C:\Temp\schlüssel.ppk"
Trace:	Unable to use this key file (unable to open file)
Trace:	Keyboard-interactive authentication refused
Command:	Pass: 
Trace:	Sent password
Trace:	Access denied
Error:	Authentication failed.
Trace:	CControlSocket::DoClose(1030)
Trace:	CSftpControlSocket::ResetOperation(1094)
Trace:	CControlSocket::ResetOperation(1094)
Error:	Critical error
Error:	Could not connect to server
Trace:	CFileZillaEnginePrivate::ResetOperation(1094)

I have a problem. Almost every movie I download from Filezilla has no sound. Like I downloaded Harry Potter and the Deathly Hallows, Tha last airbender, The Company man, Buried,.. So I think all of the new movies don't have sound.

Please help.

I have been using FileZilla and PCTools internet security concurrently without problems for 5 months now. The new version of Filezilla appears to modify it's own binaries after EVERY command line sent/received. This means I have to "allow" it 5 times just to make a connection, let alone navigate or upload/download.

Filezilla Version 3.4.0 PC Tools Version 2011 8.0.0.608

If the new FileZilla does modify its own binaries, wouldn't there be problems with most firewalls/security software? It seems that data should be stored externally in some sort of database.

Hello Is it possible for the developer/s to add an option of deleting the source files/folders after a FTP transfer has been successfully completed in the next release of FileZilla Client?

This log is anonymized. Size of cloudy_violet.JPG is 833,949 bytes. Filezilla 3.4.0 client (Linux) with encryption (Require explicit FTP over TLS).The connection timeout is nonsense. The FTP server is the last one which is sending an ACK and is waiting for Filezilla to do something - checked with wireshark. Without encryption, everything is working fine under Linux - but with encryption see this log. Only max. 180,224 bytes per session possible. Firewall was not active. Filezilla 3.4.0 client under Windows Vista is working flawlessly (with no encryption and encryption, too).

Status:	Resolving address of my.homepage.webpack.hosteurope.de
Status:	Connecting to 123.123.123.123:21...
Status:	Connection established, waiting for welcome message...
Response:	220 ::ffff:123.123.123.123 FTP server ready
Command:	AUTH TLS
Response:	234 AUTH TLS successful
Status:	Initializing TLS...
Status:	Verifying certificate...
Command:	USER account-xyz
Status:	TLS/SSL connection established.
Response:	331 Password required for account-xyz
Command:	PASS *****************
Response:	230 User account-xyz logged in
Command:	SYST
Response:	215 UNIX Type: L8
Command:	FEAT
Response:	550 FEAT: Operation not permitted
Command:	PBSZ 0
Response:	200 PBSZ 0 successful
Command:	PROT P
Response:	200 Protection set to Private
Status:	Connected
Status:	Retrieving directory listing...
Command:	PWD
Response:	257 "/" is the current directory
Command:	TYPE I
Response:	200 Type set to I
Command:	PASV
Response:	227 Entering Passive Mode (123,123,123,123,203,69).
Command:	LIST
Response:	150 Opening ASCII mode data connection for file list
Response:	226 Transfer complete
Status:	Directory listing successful
Status:	Retrieving directory listing...
Command:	CWD www
Response:	250 CWD command successful
Command:	PWD
Response:	257 "/www" is the current directory
Command:	PASV
Response:	227 Entering Passive Mode (123,123,123,123,203,156).
Command:	LIST
Response:	150 Opening ASCII mode data connection for file list
Response:	226 Transfer complete
Status:	Directory listing successful
Status:	Resolving address of my.homepage.webpack.hosteurope.de
Status:	Connecting to 123.123.123.123:21...
Status:	Connection established, waiting for welcome message...
Response:	220 ::ffff:123.123.123.123 FTP server ready
Command:	AUTH TLS
Response:	234 AUTH TLS successful
Status:	Initializing TLS...
Status:	Verifying certificate...
Command:	USER account-xyz
Status:	TLS/SSL connection established.
Response:	331 Password required for account-xyz
Command:	PASS *****************
Response:	230 User account-xyz logged in
Command:	PBSZ 0
Response:	200 PBSZ 0 successful
Command:	PROT P
Response:	200 Protection set to Private
Status:	Connected
Status:	Starting upload of /home/itsme/Desktop/cloudy_violet.JPG
Command:	CWD /www
Response:	250 CWD command successful
Command:	PWD
Response:	257 "/www" is the current directory
Command:	TYPE I
Response:	200 Type set to I
Command:	PASV
Response:	227 Entering Passive Mode (123,123,123,123,202,66).
Command:	STOR cloudy_violet.JPG
Response:	150 Opening BINARY mode data connection for cloudy_violet.JPG
Error:	Connection timed out
Error:	File transfer failed after transferring 180,224 bytes in 21 seconds
Status:	Resolving address of my.homepage.webpack.hosteurope.de
Status:	Connecting to 123.123.123.123:21...
Status:	Connection established, waiting for welcome message...
Response:	220 ::ffff:123.123.123.123 FTP server ready
Command:	AUTH TLS
Response:	234 AUTH TLS successful
Status:	Initializing TLS...
Status:	Verifying certificate...
Command:	USER account-xyz
Status:	TLS/SSL connection established.
Response:	331 Password required for account-xyz
Command:	PASS *****************
Response:	230 User account-xyz logged in
Command:	PBSZ 0
Response:	200 PBSZ 0 successful
Command:	PROT P
Response:	200 Protection set to Private
Status:	Connected
Status:	Starting upload of /home/itsme/Desktop/cloudy_violet.JPG
Command:	CWD /www
Response:	250 CWD command successful
Status:	Retrieving directory listing...
Command:	TYPE I
Response:	200 Type set to I
Command:	PASV
Response:	227 Entering Passive Mode (123,123,123,123,200,14).
Command:	LIST
Response:	150 Opening ASCII mode data connection for file list
Response:	226 Transfer complete
Command:	PASV
Response:	227 Entering Passive Mode (123,123,123,123,203,55).
Command:	APPE cloudy_violet.JPG
Response:	150 Opening BINARY mode data connection for cloudy_violet.JPG
Error:	Connection timed out
Error:	File transfer failed after transferring 180,224 bytes in 21 seconds
Status:	Resolving address of my.homepage.webpack.hosteurope.de
Status:	Connecting to 123.123.123.123:21...
Status:	Connection established, waiting for welcome message...
Response:	220 ::ffff:123.123.123.123 FTP server ready
Command:	AUTH TLS
Response:	234 AUTH TLS successful
Status:	Initializing TLS...
Status:	Verifying certificate...
Command:	USER account-xyz
Status:	TLS/SSL connection established.
Response:	331 Password required for account-xyz
Command:	PASS *****************
Response:	230 User account-xyz logged in
Command:	PBSZ 0
Response:	200 PBSZ 0 successful
Command:	PROT P
Response:	200 Protection set to Private
Status:	Connected
Status:	Starting upload of /home/itsme/Desktop/cloudy_violet.JPG
Command:	CWD /www
Response:	250 CWD command successful
Status:	Retrieving directory listing...
Command:	TYPE I
Response:	200 Type set to I
Command:	PASV
Response:	227 Entering Passive Mode (123,123,123,123,209,89).
Command:	LIST
Response:	150 Opening ASCII mode data connection for file list
Response:	226 Transfer complete
Command:	PASV
Response:	227 Entering Passive Mode (123,123,123,123,197,213).
Command:	APPE cloudy_violet.JPG
Response:	150 Opening BINARY mode data connection for cloudy_violet.JPG
Error:	Connection timed out
Error:	File transfer failed after transferring 180,224 bytes in 21 seconds
Status:	Resolving address of my.homepage.webpack.hosteurope.de
Status:	Connecting to 123.123.123.123:21...
Status:	Connection established, waiting for welcome message...
Response:	220 ::ffff:123.123.123.123 FTP server ready
Command:	AUTH TLS
Response:	234 AUTH TLS successful
Status:	Initializing TLS...
Status:	Verifying certificate...
Command:	USER account-xyz
Status:	TLS/SSL connection established.
Response:	331 Password required for account-xyz
Command:	PASS *****************
Response:	230 User account-xyz logged in
Command:	PBSZ 0
Response:	200 PBSZ 0 successful
Command:	PROT P
Response:	200 Protection set to Private
Status:	Connected
Status:	Starting upload of /home/itsme/Desktop/cloudy_violet.JPG
Command:	CWD /www
Response:	250 CWD command successful
Status:	Retrieving directory listing...
Command:	TYPE I
Response:	200 Type set to I
Command:	PASV
Response:	227 Entering Passive Mode (123,123,123,123,210,188).
Command:	LIST
Response:	150 Opening ASCII mode data connection for file list
Response:	226 Transfer complete
Command:	PASV
Response:	227 Entering Passive Mode (123,123,123,123,208,35).
Command:	APPE cloudy_violet.JPG
Response:	150 Opening BINARY mode data connection for cloudy_violet.JPG
Error:	Connection timed out
Error:	File transfer failed after transferring 180,224 bytes in 21 seconds
Status:	Resolving address of my.homepage.webpack.hosteurope.de
Status:	Connecting to 123.123.123.123:21...
Status:	Connection established, waiting for welcome message...
Response:	220 ::ffff:123.123.123.123 FTP server ready
Command:	AUTH TLS
Response:	234 AUTH TLS successful
Status:	Initializing TLS...
Status:	Verifying certificate...
Command:	USER account-xyz
Status:	TLS/SSL connection established.
Response:	331 Password required for account-xyz
Command:	PASS *****************
Response:	230 User account-xyz logged in
Command:	PBSZ 0
Response:	200 PBSZ 0 successful
Command:	PROT P
Response:	200 Protection set to Private
Status:	Connected
Status:	Starting upload of /home/itsme/Desktop/cloudy_violet.JPG
Command:	CWD /www
Response:	250 CWD command successful
Status:	Retrieving directory listing...
Command:	TYPE I
Response:	200 Type set to I
Command:	PASV
Response:	227 Entering Passive Mode (123,123,123,123,205,231).
Command:	LIST
Response:	150 Opening ASCII mode data connection for file list
Response:	226 Transfer complete
Command:	PASV
Response:	227 Entering Passive Mode (123,123,123,123,210,238).
Command:	APPE cloudy_violet.JPG
Response:	150 Opening BINARY mode data connection for cloudy_violet.JPG
Response:	226 Transfer complete
Status:	File transfer successful, transferred 113,053 bytes in 1 second
Status:	Retrieving directory listing...
Command:	PASV
Response:	227 Entering Passive Mode (123,123,123,123,198,187).
Command:	LIST
Response:	150 Opening ASCII mode data connection for file list
Response:	226 Transfer complete
Status:	Directory listing successful

Hi, Would you please add this feature; if the filename is same but the filesize is different then overwrite otherwise dont overwrite. Sometimes whent the connection is broker and partial files are sit in the destination location. Source files should overwrite those partial files. Thanks

Everytime I try to upload a video to the server, I get this message. It is for my domain name steveruprecht.com

When I open filezilla (3.4 version) i receive this message :

Can't open file filezilla.xml (error 5: access denied)

Why ? Can I delete this file ?

Thanks

Hi, Would you please add this feature; if the (1)filename and (2)file-Size are the same as the source and the destination location then it should skip the file to download/upload to/from the server. Currently it skips the file only if the filename is the same. It doesn’t check the filesize. I would like to skip the file if the source filename and file-size is the same otherwise overwrite. Thanks, Tim.

If you want to know how to repair your office chairs on your ​office desks then what you need to do first is to find some tips and guides on how to do it. Well, there are a lot of guides out there being sold and those guides will be very easy to find and follow. You can also find some good tips and guides on how to repair office desk chairs on the Internet if you want to. When it comes to looking for guides on the Internet, it will be all free, all you have to worry about is the Internet connection.

Now that you know how to repair the ​office chairs you have on your office then you can start repairing the broken chairs so that your office will have the right amount of chairs and for you to avoid buying another chair for your office which will cost you money.

I have a good new idea! Display any checkbox to set automatic shutdown after finish pending work. Regards, Rodrigo

I did not see a fix for the user-submitted ticken in April. I have the same problem. You have to hit accept approx 15 diff times to connect and move around in the folders. THe other ticket with the same prbolem is 7277. How can we fix this with you or PC tools? Firezilla appears to modify its own binaries after every command line sent/received.

The bookmarks are very useful, but I am not able to import and export them.

Filezilla version: 3.4.0

Compiled an executable on linux using:

arm_v5t_le-g++ -o t test.cpp

when I upload the file to an embedded linux system, t is not complete and some of the bytes that is transfered, is not the same as the original ones.

original: size = 93117 bytes remote: size = 92867 bytes

But if I change the name of the file to t.run, then the transfer is ok!

Used ghex to compare original and remote version. It is the same at file start but after a while they differ, so its not just a truncated file transmission.

Attached files:

1) original file: t.original 2) remote file: t.remote

Kind regards, Mattias Aronsson

P.S. Your ftp client is really nice looking! D.S.

10:47:50 AM: can't open file 'C:\Users\ShadowRune\AppData\Roaming\FileZilla\queue.xml' (error 5: access is denied.) 10:47:57 AM: can't open file 'C:\Users\ShadowRune\AppData\Roaming\FileZilla\filezilla.xml' (error 5: access is denied.) 11:09:57 AM: XRC resource 'ID_MENUBAR' (class 'wxMenuBar') not found! 11:09:57 AM: Cannot load main menu from resource file 11:09:57 AM: XRC resource 'ID_TOOLBAR' (class 'wxToolBar') not found! 11:09:57 AM: Cannot load toolbar from resource file 11:09:57 AM: XRC resource 'ID_QUICKCONNECTBAR' (class 'wxPanel') not found! 11:09:57 AM: Cannot load Quickconnect bar from resource file

downloaded an update from a security program I use (Advanced SystemCare) and do not know how to fix, I recently read a previous post, and changed my appdata folder to unhide and unchecked read only.

I understand this is a "as designed" in the sense that the protocol does not directly handle it, but other clients can do this (converting CR/LF to LF for unix is not rocket science), so I am posting it as a bug. I love FileZilla except for this lack of an important "feature".

It might be nice to at least warn the user the first time an ascii file is transferred over ssh to a unix system because several of us have spent a lot of time trying to get it to work until we finally found a forum entry that said this was as designed. I understand this, but again other clients have found a way to deal with it. I am forced to abandon FileZilla for the moment.

Even a disclaimer on the transfer type config page would help. This has been incredibly frustrating and even caused us issues during deployments since this causes a silent failure.

You HAVE to change the keyboard shortcut for downloading/ uploading files from Command+down_arrow to something else! This is a standard shortcut for entering lower directories in the Mac OS. It's absolutely crazy to use this for anything else. I hope you can change this in the upcoming release!

Using version 3.5.0 of Filezilla

I am using filezilla 3.5.0 on windows 7 and find that the traditional Chinese folder names and file names became monster characters in the "remote site" box, but it is normal in the lower box.

This causes the failure of viewing and opening of the folder.

I have tried to configure FileZilla in both Passive and Active mode and I get the same error message it timed out and closed.I have also tried to by pass my Netgear wireless router and it did not help any I still get the error messages. I have tried to find the answer it the Forums but I couldn't get any help from them that I could find. So as last result I am trying you guys.

Passive files:

Connecting to probe.filezilla-project.org Response: 220 FZ router and firewall tester ready USER FileZilla Response: 331 Give any password. PASS 3.5.0 Response: 230 logged on. Checking for correct external IP address Retrieving external IP address from ​http://ip.filezilla-project.org/ip.php Checking for correct external IP address IP 71.7.109.250 hb-h-baj-cfa Response: 200 OK PREP 5007 Response: 200 Using port 5007, data token 279475696 PORT 71,7,109,250,19,143 Connection timed out. Connection closed

CLIENT MADE FILES:

Connecting to probe.filezilla-project.org Response: 220 FZ router and firewall tester ready USER FileZilla Response: 331 Give any password. PASS 3.5.0 Response: 230 logged on. Checking for correct external IP address Retrieving external IP address from ​http://ip.filezilla-project.org/ip.php Checking for correct external IP address IP 71.7.109.250 hb-h-baj-cfa Response: 200 OK PREP 5000 Response: 200 Using port 5000, data token 527928049 PORT 71,7,109,250,19,136 Connection timed out. Connection closed

OPERATING SYSTEM FILES:

FileZilla Client

Version: 3.5.0

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2011-05-22 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 2.10.4

Operating system:

Name: Windows NT 6.1 (build 7600) Version: 6.1 Platform: 64 bit system

We are running into one issue to delete file. The file name contains QUIT as part of fil name, like "Hotel Quito - JW Marriott.pdf". Please help!

Version of FileZilla is 3.5.0

I am Touseef from HP trying to replicate customer's issue. Customer uses external ftp site hosted on Filezilla Server 0.9.34 beta. They use our scanner to send to ftp but it fails saying "unable to write file at this location, please use someother location". It works fine from Windows and other scanners sending to same location. I have been able to replicate the problem sending to the customer's ftp site. I captured network trace on both working and non working device. The difference i found was the non working device uses EPRT command to open connection for transfering data and the ftp server responds saying "425 Can't open data connection" where as the working one uses PORT command and it works fine there. I downloaded the same ftp server application and tried replicating, but was able to send fine from the non working device. Now i am wondering what setting on the ftp server can we configure to make ftp server accept connections on EPRT command. Your advice will be really helpful. I have attached screenshots of the network trace for your reference.

I'm using filezilla 3.5.0 to connect to an ftp server which is also used as a ms windows remote drive, thus file encoding must be the one used by the windows "remote mount" dialog (where it cannot be configured).

Since the machine is used by German locale clients, the right encoding is "Cp850", and up- and downloading using this configuration works with files containing e.g. umlauts.

Filezilla however displays nerve-wrecking error pop-ups "cannot convert from the charset Cp850", which is simply wrong.

I was prompted to update version and my ftp connections no longer work since upgrading to version 3.5. Build date 2011-5-22.

Can you tell me how to correct this?

Error for all ftp connections to various servers:

Error: Connection timed out Error: Could not connect to server

Regards, Alain

Hi I use FileZilla 3.5.0. And in the pane of Remote Site Files I can see ONLY 1998 files! The rest are impossible to see.

Please fix it. Thank you

file what special caracter ç d'not listed in server

This is a repeated problem I've had with FileZilla, where certain folders get "stuck" and won't delete, no matter what I try. There are several in our Current Releases directory that I've been trying to delete for months. Any help would be appreciated. Thanks.

​ftp://ftp.mcculloughpr.com/(!)Current%20Releases/(Mecum)%202011%20Original%20Spring%20Classic%20Auction/

​ftp://ftp.mcculloughpr.com/(!)Current%20Releases/(Mecum)%20Rare%20Vette%20at%20Bloomington%20Gold%20Auction/

case: filezilla 3.5, ssh connection, uploading whole directory

It seems that filezilla improperly handles the response to the SSH_FXP_REALPATH command. According to the ssh drafts the server can reply with the the SSH_FXP_STATUS upon failure (Specified file path is invalid. reason=2; File not found reason=2) and from then on it is client responsibility to act upon those responses.

Server side responses:

Sending SSH_FXP_STATUS: : /00149642: Specified file path is invalid. reason=2

Sending SSH_FXP_STATUS: : File not found reason=2

Usually when a directory does not exist on the remote server, the client will receive such error message and then should issue the make directory.

Attached is the filezilla log in debug mode.

I find that when I upload a file to any server the Preserve timestamps of transfer file do not work in ver 3.5. When I test using other ftp program to the same site it is ok. please check

I downloaded filzilla today. I followed some tutorials and read a few forums about using filezilla. I am unable to see any files on my pc or my server to upload. I also enabled in the debug window "Show raw directory listing", still nothing viewable ! And I am unable to delete any files on my server ! Please look at my screen shots here

Please contact me at n e b l e n d e r @ g m a i l . c o m

Starting filezilla.exe either directly or with shortcut generates this error message:

Users\PM\AppData\Roaming\FileZilla\filezilla.xml Error reading Attributes For this session the default settings will be used. Any changes to the settings will not be saved.

As a result, the settings are dropped, and any settings entered cannot be saved. This bug appeared suddenly, without any cause that I can identify. It could not be corrected by uninstalling and re-installing, and it could not be corrected by downloading a new setup file and re-installing that. I will answer any questions that would help de-bug this. Thanks for helping.

Following is a copy of the filezilla.xml file:

<?xml version="1.0" encoding="UTF-8" standalone="yes" ?> <FileZilla3>

<Settings>

<Setting name="Use Pasv mode" type="number">1</Setting> <Setting name="Limit local ports" type="number">0</Setting> <Setting name="Limit ports low" type="number">6000</Setting> <Setting name="Limit ports high" type="number">7000</Setting> <Setting name="External IP mode" type="number">0</Setting> <Setting name="External IP" type="string" /> <Setting name="External address resolver" type="string">​http://ip.filezilla-project.org/ip.php</Setting> <Setting name="Last resolved IP" type="string" /> <Setting name="No external ip on local conn" type="number">1</Setting> <Setting name="Pasv reply fallback mode" type="number">0</Setting> <Setting name="Timeout" type="number">20</Setting> <Setting name="Logging Debug Level" type="number">0</Setting> <Setting name="Logging Raw Listing" type="number">0</Setting> <Setting name="fzsftp executable" type="string">&quot;C:\Program Files (x86)\FileZilla FTP Client\fzsftp.exe&quot;</Setting> <Setting name="Allow transfermode fallback" type="number">1</Setting> <Setting name="Reconnect count" type="number">2</Setting> <Setting name="Reconnect delay" type="number">5</Setting> <Setting name="Speedlimit inbound" type="number">0</Setting> <Setting name="Speedlimit outbound" type="number">0</Setting> <Setting name="Speedlimit burst tolerance" type="number">0</Setting> <Setting name="View hidden files" type="number">0</Setting> <Setting name="Preserve timestamps" type="number">0</Setting> <Setting name="Socket recv buffer size (v2)" type="number">4194304</Setting> <Setting name="Socket send buffer size (v2)" type="number">262144</Setting> <Setting name="FTP Keep-alive commands" type="number">0</Setting> <Setting name="FTP Proxy type" type="number">0</Setting> <Setting name="FTP Proxy host" type="string" /> <Setting name="FTP Proxy user" type="string" /> <Setting name="FTP Proxy password" type="string" /> <Setting name="FTP Proxy login sequence" type="string" /> <Setting name="SFTP keyfiles" type="string" /> <Setting name="Proxy type" type="number">0</Setting> <Setting name="Proxy host" type="string" /> <Setting name="Proxy port" type="number">0</Setting> <Setting name="Proxy user" type="string" /> <Setting name="Proxy password" type="string" /> <Setting name="Logging file" type="string" /> <Setting name="Logging filesize limit" type="number">10</Setting> <Setting name="Trusted root certificate" type="string" /> <Setting name="Number of Transfers" type="number">2</Setting> <Setting name="Ascii Binary mode" type="number">0</Setting> <Setting name="Auto Ascii files" type="string">am|asp|bat|c|cfm|cgi|conf|cpp|css|dhtml|diz|h|hpp|htm|html|in|inc|js|jsp|m4|mak|md5|nfo|nsi|pas|patch|php|phtml|pl|po|py|qmail|sh|shtml|sql|svg|tcl|tpl|txt|vbs|xhtml|xml|xrc</Setting> <Setting name="Auto Ascii no extension" type="number">1</Setting> <Setting name="Auto Ascii dotfiles" type="number">1</Setting> <Setting name="Theme" type="string">opencrystal/</Setting> <Setting name="Language Code" type="string">en</Setting> <Setting name="Last Server Path" type="string">1 0 3 usr 3 www 5 users 8 kamprint 5 video</Setting> <Setting name="Concurrent download limit" type="number">0</Setting> <Setting name="Concurrent upload limit" type="number">0</Setting> <Setting name="Update Check" type="number">1</Setting> <Setting name="Update Check Interval" type="number">7</Setting> <Setting name="Last automatic update check" type="string">2011-07-19 17:47:12</Setting> <Setting name="Update Check New Version" type="string" /> <Setting name="Update Check Check Beta" type="number">0</Setting> <Setting name="Show debug menu" type="number">0</Setting> <Setting name="File exists action download" type="number">0</Setting> <Setting name="File exists action upload" type="number">0</Setting> <Setting name="Allow ascii resume" type="number">0</Setting> <Setting name="Greeting version" type="string">3.5.0</Setting> <Setting name="Onetime Dialogs" type="string" /> <Setting name="Show Tree Local" type="number">1</Setting> <Setting name="Show Tree Remote" type="number">1</Setting> <Setting name="File Pane Layout" type="number">0</Setting> <Setting name="File Pane Swap" type="number">0</Setting> <Setting name="Last local directory" type="string">C:\Website\_we_info5\video\</Setting> <Setting name="Filelist directory sort" type="number">0</Setting> <Setting name="Queue successful autoclear" type="number">0</Setting> <Setting name="Queue column widths" type="string">180 60 180 80 60 150</Setting> <Setting name="Local filelist colwidths" type="string">120 80 100 120</Setting> <Setting name="Remote filelist colwidths" type="string">162 75 80 100 80 80</Setting> <Setting name="Window position and size" type="string">0 263 30 884 602 </Setting> <Setting name="Splitter positions (v2)" type="string">97 -131 500000000 135 135 500000000</Setting> <Setting name="Local filelist sortorder" type="string">1 3</Setting> <Setting name="Remote filelist sortorder" type="string">1 3</Setting> <Setting name="Time Format" type="string">1</Setting> <Setting name="Date Format" type="string">1</Setting> <Setting name="Show message log" type="number">1</Setting> <Setting name="Show queue" type="number">1</Setting> <Setting name="Size format" type="number">0</Setting> <Setting name="Size thousands separator" type="number">1</Setting> <Setting name="Default editor" type="string">0</Setting> <Setting name="Always use default editor" type="number">0</Setting> <Setting name="Inherit system associations" type="number">1</Setting> <Setting name="Custom file associations" type="string">&#x0A;jpg &quot;C:\Program Files\FullScreen Photo Viewer\FullScreen Photo Viewer.exe&quot;</Setting> <Setting name="Comparison mode" type="number">1</Setting> <Setting name="Comparison threshold" type="number">1</Setting> <Setting name="Site Manager position" type="string" /> <Setting name="Theme icon size" type="string">16x16</Setting> <Setting name="Timestamp in message log" type="number">0</Setting> <Setting name="Sitemanager last selected" type="string" /> <Setting name="Local filelist shown columns" type="string">1111</Setting> <Setting name="Remote filelist shown columns" type="string">110111</Setting> <Setting name="Local filelist column order" type="string">0,2,3,1</Setting> <Setting name="Remote filelist column order" type="string">0,2,3,1,4,5</Setting> <Setting name="Filelist status bar" type="number">1</Setting> <Setting name="Filter toggle state" type="number">0</Setting> <Setting name="Size decimal places" type="number">0</Setting> <Setting name="Show quickconnect bar" type="number">1</Setting> <Setting name="Messagelog position" type="number">0</Setting> <Setting name="Last connected site" type="string" /> <Setting name="File doubleclock action" type="number">0</Setting> <Setting name="Dir doubleclock action" type="number">0</Setting> <Setting name="Minimize to tray" type="number">0</Setting> <Setting name="Search column widths" type="string" /> <Setting name="Search column shown" type="string" /> <Setting name="Search column order" type="string" /> <Setting name="Search window size" type="string" /> <Setting name="Comparison hide identical" type="number">0</Setting> <Setting name="Search sort order" type="string"

Trying to set up FZ Server on Windows Home Server 2011 -Cleared ports 14147, 21 in the router -Not sure of server address to use in "Connect to Server". Tried the address WHS set up; tried addresses listed in IPCONFIG; Tried 127.0.0.1. What else? -Created exceptions in NOD32. -Frankly not sure why I need to connect to server to get the server to wait for incoming connections. -Also not sure why Settings is greyed out in menu of interface. How am I supposed to configure the FZ Server? -I've read the documentation, which is next to useless. FAQ is not much better. Forum is non-existent.

I'm definitely missing something. (no jokes please)

Hallo,

i found in the directory FileZila on a MS Windows Desktop PC the file recentservers.xml and if i open this file, then i can read my pasword in clear code.

I think, it is verry dangerous to save paswords in xml-files in a clear code.

Perhaps it is possible to save this pasword encoded?

Thanks

Toda vez que eu clico em algum arquivo dentro do FileZilla 3.5.0 e arrasto para a area de trabalho ou para alguma pasta sempre ocorre este erro "Não foi possível determinar o destino da operação de arrastar e soltar."

Hi, I'll not insist on the need to encrypt passwords: it is obvious (since when Windows session is secure?!). If you really don't want to listen to all the people who want encrypted password, would it be at least possible to change the location of the ServerSettings.xml, in order to put it in a secure container (Truecrypt), as I do for other non-secure software ? Thanks.

Our FTP server (Globalscape) has a no list files permission, so clients uploading cannot view or list the files on the server (security reasons). This has been working fine with previous version of FZ (3.1, 3.2), however in the latest version of FZ 3.5, this no longer works. Other FTP clients work fine also. As it used to work fine on previous versions of FZ, and now on new v3.5 no longer works, then I would categories it as a bug. Our problem is that we recommend our users to use FZ, as it's very simple robust, but were now getting clients reporting problems as they upgrade. Problem occurs on both the Windows and mac clients.

Status: Resolving address of sydftp.acp.com.au Status: Connecting to 203.18.241.160:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220 Trace: CFtpControlSocket::SendNextCommand() Command: USER scope Trace: CFtpControlSocket::OnReceive() Response: 331 Password required for scope. Trace: CFtpControlSocket::SendNextCommand() Command: PASS * Trace: CFtpControlSocket::OnReceive() Response: 230-Login OK. Proceed. Response: 230-Select the appropriate Magazine folder. Response: 230-NOTE users can only UPLOAD to the 'Send to ACP' folder Response: 230 If collecting files then look within the 'Pickup from ACP' folder, as DOWNLOADs are allowed. Trace: CFtpControlSocket::SendNextCommand() Command: SYST Trace: CFtpControlSocket::OnReceive() Response: 215 UNIX Type: L8 Trace: CFtpControlSocket::SendNextCommand() Command: FEAT Trace: CFtpControlSocket::OnReceive() Response: 211-Features supported: Response: COMB target;source_list Response: REST STREAM Response: SIZE Response: MDTM Response: XCRC filename;start;end Response: SSCN Response: MLST Size*;Modify*;Create;Type*;Unique;Perm*;Lang;Media-Type;CharSet; Response: XNOP Response: 211 END Status: Connected Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Retrieving directory listing... Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/" is current folder. Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: TYPE I Trace: CFtpControlSocket::OnReceive() Response: 200 Type set to I. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (203,18,241,160,109,97). Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: MLSD Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for MLSD /. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnConnect Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. 3263 bytes transferred. 3263 bps. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: CWD Womans Day Trace: CFtpControlSocket::OnReceive() Response: 250 Folder changed to "/Womans Day". Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/Womans Day" is current folder. Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (203,18,241,160,109,97). Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: MLSD Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for MLSD /Womans Day. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnConnect Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. 204 bytes transferred. 204 bps. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: CWD Send to ACP Trace: CFtpControlSocket::OnReceive() Response: 250 Folder changed to "/Womans Day/Send to ACP". Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/Womans Day/Send to ACP" is current folder. Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (203,18,241,160,109,97). Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: MLSD Trace: CFtpControlSocket::OnReceive() Response: 550 Permission denied. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Error: Failed to retrieve directory listing Status: Resolving address of sydftp.acp.com.au Status: Connecting to 203.18.241.160:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220 Trace: CFtpControlSocket::SendNextCommand() Command: USER scope Trace: CFtpControlSocket::OnReceive() Response: 331 Password required for scope. Trace: CFtpControlSocket::SendNextCommand() Command: PASS * Trace: CFtpControlSocket::OnReceive() Response: 230-Login OK. Proceed. Response: 230-Select the appropriate Magazine folder. Response: 230-NOTE users can only UPLOAD to the 'Send to ACP' folder Response: 230 If collecting files then look within the 'Pickup from ACP' folder, as DOWNLOADs are allowed. Status: Connected Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::FileTransfer() Status: Starting upload of C:\temp\PrePress Edit INGEST test files\ZZ-0511\co0511VIRTUALCARD.pdf Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: CWD /Womans Day/Send to ACP Trace: CFtpControlSocket::OnReceive() Response: 250 Folder changed to "/Womans Day/Send to ACP". Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/Womans Day/Send to ACP" is current folder. Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: FileTransferSubcommandResult() Status: Retrieving directory listing... Trace: ftpcontrolsocket.cpp(1296): List called from other command caller=0p157c1e8 Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: TYPE I Trace: CFtpControlSocket::OnReceive() Response: 200 Type set to I. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (203,18,241,160,109,97). Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: MLSD Trace: CFtpControlSocket::OnReceive() Response: 550 Permission denied. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: FileTransferSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: FileTransferSend() Command: SIZE co0511VIRTUALCARD.pdf Trace: CFtpControlSocket::OnReceive() Response: 550 Permission denied. Trace: FileTransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: FileTransferSend() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 425 Data connection already open. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PORT 10,68,70,44,16,18 Trace: CFtpControlSocket::OnReceive() Response: 425 Data connection already open. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: FileTransferSubcommandResult() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Error: File transfer failed Trace: CFtpControlSocket::FileTransfer() Status: Starting upload of C:\temp\PrePress Edit INGEST test files\ZZ-0511\co0511VIRTUALCARD.pdf Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: FileTransferSubcommandResult() Status: Retrieving directory listing... Trace: ftpcontrolsocket.cpp(1296): List called from other command caller=0p157c1e8 Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 425 Data connection already open. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PORT 10,68,70,44,16,19 Trace: CFtpControlSocket::OnReceive() Response: 425 Data connection already open. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: FileTransferSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: FileTransferSend() Command: SIZE co0511VIRTUALCARD.pdf Trace: CFtpControlSocket::OnReceive() Response: 550 Permission denied. Trace: FileTransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: FileTransferSend() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 425 Data connection already open. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PORT 10,68,70,44,16,20 Trace: CFtpControlSocket::OnReceive() Response: 425 Data connection already open. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: FileTransferSubcommandResult() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Error: File transfer failed Trace: CFtpControlSocket::FileTransfer() Status: Starting upload of C:\temp\PrePress Edit INGEST test files\ZZ-0511\co0511VIRTUALCARD.pdf Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: FileTransferSubcommandResult() Status: Retrieving directory listing... Trace: ftpcontrolsocket.cpp(1296): List called from other command caller=0p157c1e8 Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 425 Data connection already open. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PORT 10,68,70,44,16,21 Trace: CFtpControlSocket::OnReceive() Response: 425 Data connection already open. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: FileTransferSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: FileTransferSend() Command: SIZE co0511VIRTUALCARD.pdf Trace: CFtpControlSocket::OnReceive() Response: 550 Permission denied. Trace: FileTransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: FileTransferSend() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 425 Data connection already open. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PORT 10,68,70,44,16,22 Trace: CFtpControlSocket::OnReceive() Response: 425 Data connection already open. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: FileTransferSubcommandResult() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Error: File transfer failed Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 425 Data connection already open. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PORT 10,68,70,44,16,23 Trace: CFtpControlSocket::OnReceive() Response: 425 Data connection already open. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Error: Failed to retrieve directory listing

Today, I am connect a ftp server, in Win7 upload file OK, but in XP or win2003 upload file failed (download file is OK). I am at a loss what to do next. help me, thanks you .

Hi FileZilla Team,

I recently discovered that files with umlaute (ö,ü,ä, …) are not shown in the directory listing or the directorys itself.

The Windows version works fine, it’s only am Mac problem. I use the newest FileZilla version. The problem exists on Snow Leopard and Lion.

I think this issue is also described in ticket 7406

Regards, Edgar

With Filezilla Client 3.5.0 there are a lot of information that don't show correcly. The symlinks don't show it, owner and group show the uid and permissions show strangely.

Server is ProFTPD 1.3.3d Server (ProFTPD Default Installation) with UNIX Type: L8.

The same ftp work fine with WinSCP.

连接到linux ssh协议; 可能是没刷新?然后计算时使用的是未刷新前的文件大小, 在服务器一直在生成文件,大小已改变.所以计算有误?

host is linux; connect by ssh; ie. the file is test.txt; flush file list now it say file is 5KB; but sever is writing the test.txt; by the end is may be 1MB; don't flush,allway it show text.txt is 5KB ; down it, the rate of progress is 100%; but it's not finished.

I accidentally deleted the public html file while I was tiring to upload a money making site file. Could you help me with this or tell me where to go because I don't now anything about source codes or html

Katherine Friesen friesenkatherine@… 204 325 6824

Filezilla 3.5.1 cannot connect to sftp servers with either key based or password based methods. Logs with debuging/verbose=3 attached.

I have verified that this is not a function of my system by repeating on an independent box with the same results. As well, I am pretty sure that nothing is wrong with the server because I used "sftp -P 34451 facade@mars" from a shell and connect just fine. As well, using gftp, I am able to connect. The Host OS is Archlinux x86_64 which is up-to-date (Arch is a rolling release).

I have done 3 times. I am using FileZilla 3.5.1 on my PC, MS-Windows, Ver 5.1(Build 2600.xpsp_sp3_....:Service Pack 3) I want to transfer 62,424 files, with names like PHO_0xxxxxxx-5_1003457.HL7;1 to an USB drive (E:) on my PC. I am connected to a VAX OpenVMS V8.2. To gather the names (LIST in FTP) takes about an hour. I then do a CTRL-A on the names in the "remote directory" screen, and put it into the "Home" screen. I am also watching My "Task Master" Perforamce tab, to watch the CPU Usage screen. After about 45 minutes, CPU Usage becomes 100% usage and no more files are being copied. I "stop" Filezilla and check the number of files on my USB "Memery stick" and all 3 times the same number files, 16,385. 16,385 = 214 + 1. These files are anywhere 1KB big to 120KB big. And they are 100% text files, or HL7 files.

If possible, let me know. Thanks

If we Download a File from a FTP Server, the Rights are changed. And we can't change it with chmod or a system buil-in GUI afterwards. We have to download it as a zip or as a .dmg for mac then it works. Theres not the rights themselves who are false setted. Because after chmod 777 the rights should be setted right and it also shown. But still we have no permission to write...

It takes appx 3 minutes to get interface loaded if there are network drives present on the system. Further actions take even longer, and cause app to become non-responsive too.

VMS stores several versions of a file.

I am using "Strip VMS revisions" and overwrite if file is newer options.

I would expect to only receive the latest VMS versions on my Windows machine.

It seems like I receive a random version of the file.

I'd like to change the tab order by Mouse Dragging when I have multiple tabs opened at a time. Is it under progress in development of Beta version or scheduled for future versions?

FileZilla client not able to upload folders containing files to Maverick SSHD version 1.4.32

Folders that do not exist on the Server Maverick sends back: SSH_FXP_STATUS: : File not found reason=2

FileZilla does not appear to be properly interpreting the response and does not issue a SSH_FXP_MKDIR

Hi, I'm always scared that I'll completely remove a failed file transfer because of a problem with the user interface.

Basically, when a file fails, it goes into the failed tab - as you know! You then right click it and there are a list of options. The first option is 'Remove', the second option is 'Reset/Requeue'. Great. Now, it goes to the Queued files area. You right click again - but 'Process Queue' is in the first position - on the other tab, 'Remove' is in the first position. It would be nice if 'remove' was the SECOND right click option on the 'Failed Transfer' tab, as it would create a better User Experience and make it easier to requeue and restart the failed file.

I hope this makes sense! I can include screenshots if not.

I've ranked this as high as new users may expect these options to be in the first position, and may accidentally remove failed files (and it's almost impossible to tell which were removed if there are a lot).

Thanks!! :) Great software.

When updating filezilla.app the program wont open, the icon bounces & console says theres a permissions problem.

Ive tried:

• Adding System, Staff, Administrators, Wheel, Everyone all as "Read & Write" for the app. Doesn't fix it.

• tried chmoding Filezilla with "chmod -R +rwX FileZilla.app" and "chmod -R +rw FileZilla.app" and nothing works.

i've tried deleting everything associated to the program (application support, the app, xml files, etc) and restarting, clearing trash, resetting pram... and also just installing fresh.

now it seems it's stuck not working.

this has happened on 2 previous updates and it was a month or two ago and i forgot how i fixed it. i want to say the adding system worked last time. but not this time.

ive verified & repaired disk permissions. no dice...

my web host, pacifichost.com supports 6 concurrent connections. Ive tried filezilla and like it but one thing is making me switch to smartftp...

Status: Connection established, waiting for welcome message... Response: 421 Too many connections (8) from this IP Error: Could not connect to server

Even though I set under settings - transfer max simultaneous transfers to 4, somehow it keeps going OVER this hard limit.

And my web host then blocks me out for about a half hour. Other ftp apps this isnt a problem. I would say this is a showstopper.

Please fix this asap.

Thanks

I'm hosting a FTP server with explicit TLS and recently enabled TLS 1.1/1.2 on it. Now a few users reported to me (and I could reproduce this) that they couldn't connect to the server due to a GnuTLS error being displayed. Other clients using GnuTLS (but those are using newer version from what they've told me) or Windows CryptoAPI/CNG (ie SmartFTP) can still connect flawlessy.

Server: IIS 7.5, SSL 3.0, TLS 1.0,1.1,1.2 enabled, explicit mode. (with 1.1/1.2 disabled, it works)

Logs:

Status: Resolving address of rev-crew.info Status: Connecting to x.x.x.x:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220 Microsoft FTP Service Trace: CFtpControlSocket::SendNextCommand() Command: AUTH TLS Trace: CFtpControlSocket::OnReceive() Response: 234 AUTH command ok. Expecting TLS Negotiation. Status: Initializing TLS... Trace: CTlsSocket::Handshake() Trace: CTlsSocket::ContinueHandshake() Trace: CTlsSocket::OnSend() Trace: CTlsSocket::OnRead() Trace: CTlsSocket::ContinueHandshake() Trace: CTlsSocket::OnRead() Trace: CTlsSocket::ContinueHandshake() Trace: CTlsSocket::Failure(-9, 10053) Error: GnuTLS error -9: A TLS packet with unexpected length was received. Status: Server did not properly shut down TLS connection Trace: CTlsSocket::OnSocketEvent(): close event received Trace: CRealControlSocket::OnClose(10053) Trace: CControlSocket::DoClose(64) Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Error: Could not connect to server Trace: CFileZillaEnginePrivate::ResetOperation(66) Status: Waiting to retry... Trace: CControlSocket::DoClose(64) Trace: CControlSocket::DoClose(64)

When connecting to any of the sites in my connection list the toolbar icons disappear. I have been checking to see if this problem has been fixed in the new releases but have not seen anything, not knowing if you know about it I thought I would let you know. I have attached a screenshot to show you how i see it. Thank you very much I use this software every day keep up the good work.

Same problem as Ticket #3698

I get wrong date when listing the remote directory. sFTP on FreeFTPd ver 1.0.11 on win 2003 SP2 FileZilla Client is 3.5.1 running on windows 7 FreeFTPd is 1.0.11 on win 2003 SP2

From the log:

Command: pwd Response: Current directory is: "/" Command: ls Status: Listing directory / Status: Calculating timezone offset of server... Command: mtime "2010-08-17" Response: 4294967295 Status: Timezone offsets: Server: 1293629340 seconds. Local: 7200 seconds. Difference: -1293622140 seconds. Status: Directory listing successful

The dates listed in FileZilla is wrong. 2011-10-28 are listed as 1970-04-04. It can possibly be a problem in FreeFTPd, but WinSCP lists it correct. In WinSCP there is a switch "Misinterprets file stamps prior to 1970". This is set to Auto in my case. Would this be possible to implement in FileZilla?

I use putty as a proxy to phpcloud.com, and save the setting in putty. but when I try use FileZilla to connect phpcloud, it will timeout after: Initialised zlib (RFC1950) decompression And when I delete the setting saved in putty, filezilla can connect to phpcloud successful.

I open the debug log, and the things different is: If I save the site setting in putty, FileZilla will doing: Initiating key re-exchange (enabling delay compression) and then will timeout after: Initialised zlib (RFC1950) decompression

It happened at FileZilla 3.5.1.0 and 3.5.2.0

I have entered all the information correctly provided to me by BrainHost, but still am unable to connect, the message is below.

Status: Resolving address of ftp.envisageearnings.com Status: Connecting to 69.175.48.74:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 2 of 50 allowed. Response: 220-Local time is now 20:10. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER gcenvisa Response: 331 User gcenvisa OK. Password required Command: PASS Response: 530 Login authentication failed Error: Critical error Error: Could not connect to server

So it's about the storage of unencrypted password ... I know a lot of ticket has been posted about this, but there is a reason for that.

I perfectly understand your reason to do that and I understand it's "by design". I know you can fix that problem with the kiosk mode option in the filezilla.xml file.

I just think that :

1) This option should be available directly in the preference window of the client gui. It's not an "advanced" setting, it's a critical setting so you shouldn't hide it in some xml file. A lot of people want to change that behaviour of storing the password, and so go to the preference window ... and find nothing. Adding that cost you nothing, even in term of "design" or "philosophy".

2) When first using this software you don't know your password is gonna be logged in clear text, nothing tell it to you. In the whole software industry nobody do that, even Micro$oft with Int€rn€t €xplor€r ask before storing a password. User should be aware of that. So there is 2 solutions : you ask the user the first time at the first use or you put the default value of kiosk mode to 1 (so you still log an history of servers but without the password).

To conclude, I can understand that by design you want to make your users life easy, but I can't understand that you want to store ssh (sftp) password in plaintext without him knowing about it. I'm just asking you to make users more aware of that choice, to help them make enlightened choices.

I recently received an update notification and downloaded/installed FileZilla Client 3.5.2. Since then, I cannot get a file to transfer. I have been uploading a similar file for over two months and now, only after the update, it will not transfer.

Please help.

Thank you, Chris

Using version 0.9.40 I have met this issue several times. If logging is enabled and file size set limited to, ie 100000 KB, setting use a different logfile each day, setting delete old files after some days, When the log file size exceed 100000 KB the service will be blocked by something looks like log file operation. I can only restart the service to recover because user interface cannot get response. I would expect save this file to an old file (fzs-2003-02-10.log.0) when its size will exceed 100000 KB.

An error occurred with TLS renegotiation while downloading file > 1 GB on server using passive FTP with explicit authentication on TLS.

I put in the queue 2 file and ans to start download from server. It passed the size of the file and contnued until i terminated the program. The time left pass the EOF didnot move, Percent stayed at 100% moved size kept increasing above the original. See enclosed jpg of the screen. Both files after program termination were damaged. Transfer type was on Auto.

When I drag some files from server file list to a local folder, it crashes.

Ir returns a message when I exec filezilla from command line:

Segmentation fault

I'm using Filezilla 3.5.0

Unable to view any files in the server. Each folder shows a question mark. When viewed in a different FTP software, it will show all the existing files, but not with FileZilla software. Need problems fixed.

Reported 21 months ago... Still not fixed

​http://trac.filezilla-project.org/ticket/5211

Hello,

I use Windows 7. In august 2011 I experienced that FileZilla Client did not update the content on server side - even after manual refresh. Maybe this bug has been resolved in newer versions of FileZilla Clients?

Thank you.