Custom Query (4044 matches)

since update this morning I cannot move/drag files from one folder to a subfolder. file is there, I can transfer to my computer and back, but cannot drag to a subfolder - tells me "no such file or directory" but it is clearly there and I have done it for years.

I experienced a lot of difficulties in updating your Client to Version 4.63: I could do it only after restarting my PC, since it insisted wrongly that the Client was still running.

Please review the updating SW and correct this irritation.

F.S.Floriani

Port 443 SFTP - SSH File Transfer Protocol works perfectly on v3.45.1 but once we upgraded to v3.46.3 (newest) it does not.

Can't use SFTP on any version after 3.20.1 to the Lenovo ix2-dl NAS.

Status:	Connecting to xxx.ddns.net:1977...
Response:	fzSftp started, protocol_version=9
Command:	open "ftp@xxx.ddns.net" 1977
Command:	Pass: ********
Error:	FATAL ERROR: Remote side sent disconnect message
Error:	type 11 (by application):
Error:	"Unsupported protocol sequence"
Error:	Could not connect to server

Note: 1977 port is forwarded to 22 on router.

Works fine with 3.20.1 and below. Also tested with latest versions of other ftp clients such as CyberDuck and FireFTP and they work fine.

HOW TO SOLVE THIS

​https://i.imgur.com/HcshOFf.png

Server is OpenVMS 8.4.

On access, directories are correctly shown as folders. In some occasions however, directories are shown as files, but with correct extension (.DIR) and version number (;1). Security, ownership etc are the same for all directories. Debug log does not show this; Image 1 shows the correct type of information, inmage 2 shows files that are actually directories but are shown as files.

The remote server on Linux RH.

Our clients cannot upload large files to our Cerberus server v11 - anything 1 Byte over 1GB from a fileshare fails. Connection seems to reset and FZPro thinks the file is already there and asks to overwrite etc. If the file is on the computer local to FZPro the transfer works.

As far as I can tell this issue started with v3.46.1 – 3.46.0 worked OK. Issue happens with older versions of Cerberus too – tried a rolledback version of our server using v10 and the same issue.

A quick fix is to turn FileZilla's default connection timeout of 20 seconds off but our client does not see that as an acceptable solution (their users are prevented from making changes in the client - they are a financial institution).

Logs attached of a failed transfer (filezilla20sectimeout.log), a successful transfer (filezilla20sectimeout) and the corresponding Cerberus server log. File used was a 4GB Windows 10 installer – tested the successful upload by downloading it and doing an install from it.

Filezilla version is Filezilla Pro 3.46.3 and Cerberus version is 11.0.8.0 on a fully patched Windows Server 2019 AWS instance.

My website is still uploading JPEG files from our employees and the website still displays the JPEG files. However, after 1/14/20 FileZilla no longer displays any JPEG files even though I know these files exist on the webserver. This prevents me from backing up JPEG files since I cannot see them through the file viewer.

I am using version 3.43.3

Al iniciar una transmisión a mi servidor habitual mediante FileFilla, me ha solicitado la actualización y después de actualizarla, ya no me permite acceder a mi servidor. Adjunto captura pantalla.

Hello

Can I follow up on the closed case #12102 please. I consulted with my sftp server vendor re the issues you found in the case - primarily your finding that the window being opened was too big and that the Filezilla client was waiting for a long time to do something.

Your reply seems to say that it is the server setting the windows so large and that the upload should start immediately. They are saying it is FileZilla setting the windows so large and that they are waiting for the client to something.

So their questions are:

1. Why is the setting of the window to be so large (2GB?) a problem and
2. Is Filezilla expecting some sort of a response from the server once all the key exchange etc. has completed before starting to upload?

They are quite keen to resolve the issue with you. It is only manifesting with FileZilla - other Putty based clients (WinSCP) seem OK. Indeed Cerberus with other clients is fine and FileZilla with other servers is fine - it just seems to be the combination of the two having the issue.

Thanks Neil

When uploading from a windows fileshare the transfer fails as FileZilla is opening to large a window for the connection to the server.

In the certificate details, if you're using TLS 1.3 and an ECDSA certificate, the key exchange will show "ECDHE-RSA", when it should be showing "ECDHE-ECDSA".

It only seems to happen when using TLS 1.3, prior TLS versions correctly display "ECDHE-ECDSA".

Norton (antivirus) allowed update today -- then claimed there were "issues" and dispatched entire Filezilla program(!) and won't allow fresh download of Filezilla without (terrifying to me) override. I use Filezilla only occasionally, but rely on it totally. thank you...

Priority Settings added doesn't work while downloading files.

If priority of a one file download is set at highest and another is set at lowest then highest gets downloaded at lesser speed then lowest priority one. This should not happen otherwise there seems no other use for this field

When logging in to the webserver the tree explorer is not working First level works for ex brusdata.se but clicking on next level public_html is not possible to set focus to. Operating system type on webserver is Linux

I am trying to install Filezila_pro_3.47.2.1_win64-setup.exe in a Windows Server 2008 64bit but the installer do not start, none, do not work. What happen?

Thanks

macos10.14.6的ftpserver客户端win10连接有异常，提示 响应: 150 Opening ASCII mode data connection for '/bin/ls'. 错误: 20 秒后无活动，连接超时 错误: 读取目录列表失败 神奇的是，不用站点管理器里新建的ftp站点，用主界面的快速连接，直接连接虽然报错但是自动重连后成功了，能够list出文件列表了

Status: Connecting to 47.196.74.12:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Logged in Status: Starting download of /usbshare3/Share/TV Shows/The.Disney.Family.Singalong.2020.720p.HULU.WEB-DL.DD5.1.H264-LAZY.mkv Command: CWD /usbshare3/Share/TV Shows Response: 250 CWD command successful. Command: PWD Response: 257 "/usbshare3/Share/TV Shows" is current directory. Error: Failed to open "C:\Users\The.Disney.Family.Singalong.2020.720p.HULU.WEB-DL.DD5.1.H264-LAZY.mkv" for writing Error: File transfer failed Status: Starting download of /usbshare3/Share/TV Shows/The.Disney.Family.Singalong.2020.720p.HULU.WEB-DL.DD5.1.H264-LAZY.mkv Error: Failed to open "C:\Users\The.Disney.Family.Singalong.2020.720p.HULU.WEB-DL.DD5.1.H264-LAZY.mkv" for writing Error: File transfer failed Status: Starting download of /usbshare3/Share/TV Shows/The.Disney.Family.Singalong.2020.720p.HULU.WEB-DL.DD5.1.H264-LAZY.mkv Error: Failed to open "C:\Users\The.Disney.Family.Singalong.2020.720p.HULU.WEB-DL.DD5.1.H264-LAZY.mkv" for writing Error: File transfer failed Status: Disconnected from server Response: 421 Timeout (300 seconds): closing control connection. Error: GnuTLS error -110 in gnutls_record_recv: The TLS connection was non-properly terminated. Status: Server did not properly shut down TLS connection Error: Could not read from socket: ECONNABORTED - Connection aborted Error: Disconnected from server Status: Resolving address of Neocap.ddns.net Status: Connecting to 47.196.74.12:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Logged in Status: Starting download of /usbshare3/Share/TV Shows/Last.Week.Tonight.with.John.Oliver.S07E08.Episode.187.mkv Command: CWD /usbshare3/Share/TV Shows Response: 250 CWD command successful. Error: Failed to open "C:\Users\Last.Week.Tonight.with.John.Oliver.S07E08.Episode.187.mkv" for writing Error: File transfer failed

Doesn't matter the file almost instantaneous failure

FileZilla Client

Version: 3.47.2.1

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2020-03-11 Compiled with: x86_64-w64-mingw32-gcc (GCC) 8.3-win32 20190406 Compiler flags: -g -O2 -Wall

Linked against:

wxWidgets: 3.0.5 SQLite: 3.31.1 GnuTLS: 3.6.12

Operating system:

Name: Windows 10 (build 18362), 64-bit edition Version: 10.0 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi2 bmi2 adx lm Settings dir: C:\Users\InternalCompass\AppData\Roaming\FileZilla\

I have tried putting the path in file associations but it doesnt work transfers to somewhere_{,I dont know where tho. Its many different pdfs, not just one. If I dont specifiy a path in file associations it tries to load in my default which is notepad++}

The following bug has appeared today, immediately after I had upgraded Filezilla to version 3.48.0. It didn't happen with previous versions (I have been using FZ daily for years --- thank you for creating this wonderful tool).

Now, whenever I doubleclick a LOCAL file in order to edit it, I get an error message popup reading "Opening failed: The file '[FILENAME HERE]' could not be opened: The associated command failed" (+ OK button). This is a spurious error message, as the file does open just fine. This happens with every local file I try to edit, forcing me to close this popup on every local file edit (a very common occurrence for me). It does not happen with files on the server.

My relevant settings are:

• File lists -> Double-click action on files -> View/Edit
• File editing -> Default editor -> use custom editor -> "C:\Program Files (x86)\Vim\vim74\gvim.exe"
• File editing -> Always use default editor

Additional observation:

• If instead of double clicking the local file, I right click it and select "Edit" the same error appears. However, if I select "Open" it does not.

P.S. Also posted this on the forum.

This may be related to 12164 but I'm not completely sure. When downloading files such as log files the default application is not being picked up from windows although a default is associated. This results in the message 'The file XXXX cannot be opened. no program has been associated on your system with this file type.' To be clear this is happening on any file type html, jsp, log, jpeg, png a;; with different default apps. I have downloaded 3.47.2 which is downloading and opening these file types without issue. So image 2 shows after selecting 'OK' on image 1.

Thanks

On Windows 10. When I try to View/Edit a file on the server, it offers to Use system association (which is notepad++ on my machine). However, it then gives error -- File could not be opened. No program associated with this file type. Things work fine with FZ 3.47.2.1

I believe this issue is new to FZ 3.48.0.

When one reopens a previously-opened server file, one gets a well-known popup asking whether to "Reopen local file" or "Discard local file then download and edit file anew".

Prior to version 3.48.0, IIRC, this popup would come up with a value already selected, that value being the one the user had last selected (i.e. remembering the user's last selection, whether reopen or discard). As of version 3.48.0, this is no longer the case. The popup always comes up defaulting to "reopen", which is slightly inconvenient for me, as I almost always require "discard" (i.e. an extra click).

Not a huge issue, but it would be nice to have FZ return to remembering one's choice (or alternatively adding an option as to what should be the default value for this popup).

Hello,

there is a problem with the program associated to a file (to open). By example I have created fils association for .lo and .txt, and what I get in the parameter widow is : log "C:\Program Files\Notepad++\notepad++.exe" %fphp "C:\Program Files\Notepad++\notepad++.exe" %ftxt "C:\Program Files\Notepad++\notepad++.exe"

So juste one string for both association. I think a \n is missign somewhere.

Wonderfull job by the way.

Codrescu Stefan

hi, whenever i try to open a new filetype with any programe like NotePad++ but it starts to show error, to fix it i have to go to Edit > settings > File type association and have to define each rule in new line.

by default the filezilla is adding it in same line which cause the error.

Solution: filezilla has to add a new line \n after each new rule to make it fixed.

EX:

bytes "C:\Program Files (x86)\Notepad++\notepad++.exe" conf "C:\Program Files (x86)\Notepad++\notepad++.exe" conf_letsencrypt "C:\Program Files (x86)\Notepad++\notepad++.exe" log "C:\Program Files (x86)\Notepad++\notepad++.exe" php "C:\Program Files (x86)\Notepad++\notepad++.exe" stpl "C:\Program Files (x86)\Notepad++\notepad++.exe" tpl "C:\Program Files (x86)\Notepad++\notepad++.exe"

FileZilla Client

Version: 3.48.0

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2020-04-27 Compiled with: x86_64-w64-mingw32-gcc (GCC) 8.3-win32 20190406 Compiler flags: -g -O2 -Wall

Linked against:

wxWidgets: 3.0.5 SQLite: 3.31.1 GnuTLS: 3.6.12

Operating system:

Name: Windows 10 (build 18363), 64-bit edition Version: 10.0 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi2 bmi2 adx lm Settings dir: C:\Users\Shiva\AppData\Roaming\FileZilla\

With versions newer then 3.47.1 i.e. 3.48 or 3.48.1-rc1 I cannot connect anymore to my cloud server using SFTP. Here is an extract from the logfile:

Version 3.48 with Error

2020-05-14 15:29:14 19688 1 Status: Verbinde mit SERVER.XX... 2020-05-14 15:29:14 19688 1 Antwort: fzSftp started, protocol_version=9 2020-05-14 15:29:14 19688 1 Befehl: open "USER@…" 22 2020-05-14 15:29:14 19688 1 Status: Using username "USER". 2020-05-14 15:29:14 19688 1 Befehl: Pass: 2020-05-14 15:29:14 19688 1 Status: Access denied 2020-05-14 15:29:14 19688 1 Fehler: FATAL ERROR: No supported authentication methods available (server sent: publickey) 2020-05-14 15:29:14 19688 1 Fehler: Herstellen der Verbindung zum Server fehlgeschlagen

Version 3.47.1 working

2020-05-14 15:25:27 9536 1 Status: Verbinde mit SERVER.XX... 2020-05-14 15:25:28 9536 1 Antwort: fzSftp started, protocol_version=9 2020-05-14 15:25:28 9536 1 Befehl: open "USER@…" 22 2020-05-14 15:25:28 9536 1 Befehl: Pass: 2020-05-14 15:25:28 9536 1 Status: Connected to SERVER.XX

So working with the older version works. So does switching to FTPS.

Thank you for your support and for providing FileZilla.

J.Polster

So i have reinstalled filezilla twice because i thought that could fix my issue. Not.

Im using the blackboard theme with multiple tabs for remote servers. The issues is when opening the client all windows tabs are sized to the previous use. Perfect. BUT upon opening a new server in a new tab the remote site window fills the entire right side. It ignores the window size i have set. This is really annoying because when connecting to allot of servers, you need to manually resize the remove site window again, and again, and again....

I hope you can help me. Last week I bought the Pro version and my credit card was charged, but the download link did not reach me. So I don't have it and I'm only using the free version. I did it from the official Filezilla Pro page.

I needed to update the index.html file to reflect new information. I dragged the new version from local site to remote site.

I got the "Target file already exists" dialog, which is set to overwrite. I did not click OK yet, because I was waiting on confirmation regarding the updated information. Target file size was similar to that of source file, since little information was added.

I left the computer for just under 30 minutes with the overwrite dialog still on screen (this was an accident). The connection was active when I left the computer.

When I returned, the dialog was still there and the connection was no longer active.

However, I noticed that the actual website was blank (tested on a couple of devices and confirmed by third party). I cancelled the dialog that was still on screen and again I dragged index.html from local to remote.

Server reconnected and the overwrite dialog appeared once again. This time, the target file that was going to be overwritten (index.html) showed up as having a 0 byte size. This is consistent with the blank website I encountered through the browser. I OK that dialog and now the new and updated index is live, no problem.

Unfortunately, I was not able to reproduce this error myself, nor do I have the logs-because the client was set to not save them by default I believe, and I exited the program before deciding to submit a report. Still I thought this might warrant some looking into.

I did try searching for this bug but did not find it. It was a hard bug to search for, language-wise.

Hi, connecting to the same remote SFTP server (proftpd) it works fine with filezilla 3.47, and doesn't work with 3.48, with the exact same configuration.

Client logs : Status: Waiting to retry... Trace: CControlSocket::SendNextCommand() Trace: CSftpConnectOpData::Send() in state 0 Status: Connecting to some-sftp.server.com... Trace: Going to execute C:\Program Files (x86)\FileZilla FTP Client\fzsftp.exe Response: fzSftp started, protocol_version=9 Trace: CSftpConnectOpData::ParseResponse() in state 0 Trace: CControlSocket::SendNextCommand() Trace: CSftpConnectOpData::Send() in state 3 Command: open "someuser@…" 22 Trace: Looking up host "some-sftp.server.com" for SSH connection Trace: Connecting to XX.XX.XX.XX port 22 Trace: We claim version: SSH-2.0-FileZilla_3.48.0 Trace: Remote version: SSH-2.0-SFTP SERVER Trace: Using SSH protocol version 2 Trace: Doing Diffie-Hellman group exchange Trace: Doing Diffie-Hellman key exchange using 4096-bit modulus and hash SHA-256 (unaccelerated) with a server-supplied group Trace: Host key fingerprint is: Trace: ssh-rsa 4096 dd:9b:bf:e7:a8:d1:41:8d:db:69:26:06:a1:dc:76:3a c7eFbbeLQB8Vd5gOrtj6GZzdoQ6aWGOtCxu5HoFd66E= Trace: CSftpControlSocket::SetAsyncRequestReply Command: Trust new Hostkey: Once Trace: Initialised AES-256 SDCTR (AES-NI accelerated) outbound encryption Trace: Initialised HMAC-SHA-256 (unaccelerated) outbound MAC algorithm Trace: Initialised AES-256 SDCTR (AES-NI accelerated) inbound encryption Trace: Initialised HMAC-SHA-256 (unaccelerated) inbound MAC algorithm Status: Using username "someuser". Command: Pass: Trace: Sent password Trace: Remote side sent disconnect message type 14 (no more auth methods available): "No other authentication mechanisms available" Error: FATAL ERROR: Remote side sent disconnect message Error: type 14 (no more auth methods available): Error: "No other authentication mechanisms available" Trace: CSftpControlSocket::OnTerminate without error Trace: CControlSocket::DoClose(66) Trace: CControlSocket::ResetOperation(66) Trace: CSftpConnectOpData::Reset(66) in state 3 Error: Could not connect to server Trace: CFileZillaEnginePrivate::ResetOperation(66) Status: Waiting to retry...

Server logs: 2020-07-16 11:38:00,341 mod_sftp/1.0.0[9832]: error using DisplayLogin 'welcome.msg': No such file or directory 2020-07-16 11:38:00,342 mod_sftp/1.0.0[9832]: sent server version 'SSH-2.0-SFTP SERVER' 2020-07-16 11:38:00,342 mod_sftp/1.0.0[9832]: received client version 'SSH-2.0-FileZilla_3.48.0' 2020-07-16 11:38:00,342 mod_sftp/1.0.0[9832]: handling connection from SSH2 client 'FileZilla_3.48.0' 2020-07-16 11:38:00,363 mod_sftp/1.0.0[9832]: + Session key exchange: diffie-hellman-group-exchange-sha256 2020-07-16 11:38:00,363 mod_sftp/1.0.0[9832]: + Session server hostkey: ssh-rsa 2020-07-16 11:38:00,363 mod_sftp/1.0.0[9832]: + Session client-to-server encryption: aes256-ctr 2020-07-16 11:38:00,363 mod_sftp/1.0.0[9832]: + Session server-to-client encryption: aes256-ctr 2020-07-16 11:38:00,363 mod_sftp/1.0.0[9832]: + Session client-to-server MAC: hmac-sha2-256 2020-07-16 11:38:00,363 mod_sftp/1.0.0[9832]: + Session server-to-client MAC: hmac-sha2-256 2020-07-16 11:38:00,363 mod_sftp/1.0.0[9832]: + Session client-to-server compression: none 2020-07-16 11:38:00,363 mod_sftp/1.0.0[9832]: + Session server-to-client compression: none 2020-07-16 11:38:00,915 mod_sftp/1.0.0[9832]: sending acceptable userauth methods: password 2020-07-16 11:38:00,934 mod_sftp/1.0.0[9832]: client sent SSH_MSG_IGNORE message (13 bytes) 2020-07-16 11:38:00,934 mod_sftp/1.0.0[9832]: cipher algorithm 'USERAUTH_REQUEST someuser' or MAC algorithm 'none' unacceptable for password authentication, denying password authentication request 2020-07-16 11:38:00,934 mod_sftp/1.0.0[9832]: no more auth methods available, disconnecting 2020-07-16 11:38:00,934 mod_sftp/1.0.0[9832]: disconnecting YY.YY.YY.YY (No other authentication mechanisms available)

It works both with 3.47 and 3.48 connecting to a remote OpenSSH server instead of proftpd. I suppose there are some differences in the supported algorithms but the error messages are not crystal clear and I didn't found any related changes in the changelog for 3.48 on https://filezilla-project.org/versions.php.

As a workaround we now use another SFTP client.

i have used win10 with latest ver (19041.388). when i download latest ver. filezilla, my system detect virus. so please solve this issue thanks.

screenshot ​https://prnt.sc/toedvk

please enable this checkbox when logging onto a server i believe it was disabled in a recent update now i have to click OK fo EVERY single file upload this is ridiculous i will be forced to switch ftp programs if this is not fixed pronto bob laughlin vancouver BC

Automatically translated.

I wanted to copy all project files from the server to the local hard disk by copying the parent folder (public_html). It worked fine, except for the data which were labeled with "German" umlauts in the file or folder name. See enclosed screenshot.

Interestingly enough, there are no problems when copying, with direct dragging with the mouse from the web server to the hard disk or vice versa. Also the command "Download", after clicking with the right mouse button on the desired file, works the same way without problems.

Otherwise I would like to give your team an unbelievable big thank you for this great application FileZilla. Files or folders with umlauts (like ä, ö, ü) in the name are not copied.

I wanted to copy all project files from the server to the local hard disk by copying the parent folder (public_html). It worked fine, except for the data which were labeled with "German" umlauts in the file or folder name. See enclosed screenshot.

Interestingly, there are no problems when copying, with direct dragging with the mouse from the web server to the hard disk or vice versa. Also the command "Download", after clicking with the right mouse button on the desired file, works the same way without problems.

Antwort: New directory is: "/home/xxx/public_html/woerter/2017-09 - September" Befehl: get "Tokenübersicht.xlsx" "
DATENPLATZ\Webseiten\ssich\public_html\woerter\2017-09 - September\Tokenübersicht.xlsx" Fehler: /home/xxx/public_html/woerter/2017-09 - September/Tokenübersicht.xlsx: open for read: no such file or directory Fehler: Dateiübertragung fehlgeschlagen (Error: File transfer failed) Status: Starte Download von /home/xxx/public_html/woerter/2017-09 - September/Tokenübersicht.xlsx Befehl: get "Tokenübersicht.xlsx" "
DATENPLATZ\Webseiten\ssich\public_html\woerter\2017-09 - September\Tokenübersicht.xlsx" Fehler: /home/xxx/public_html/woerter/2017-09 - September/Tokenübersicht.xlsx: open for read: no such file or directory Fehler: Dateiübertragung fehlgeschlagen (Error: File transfer failed) Status: Starte Download von /home/xxx/public_html/woerter/2017-09 - September/Tokenübersicht.xlsx Befehl: get "Tokenübersicht.xlsx" "
DATENPLATZ\Webseiten\ssich\public_html\woerter\2017-09 - September\Tokenübersicht.xlsx" Fehler: /home/xxx/public_html/woerter/2017-09 - September/Tokenübersicht.xlsx: open for read: no such file or directory Fehler: Dateiübertragung fehlgeschlagen (Error: File transfer failed) Etc. …

Sorry, the switch to English for the protocol is time consuming, because a new download would take hours. Therefore a screenshot with an excerpt of the German protocol. Error message "File transfer failed" means translated "File transfer failed

Otherwise I would like to give your team an unbelievable big thank you for this great application FileZilla.

Translated with www.DeepL.com/Translator (free version)

Good afternoon,

I've been developing a small FTP Server for use in an embedded project, and have been using the FileZilla Client as my go-to client for testing each part of the project.

I've come across an issue where FileZilla Client shows "Empty directory listing" when using the MLSD command, but works OK if I disable MLSD support and it reverts back to the LIST command.

This issue is only present in the FileZilla Client on Windows. The same version of FileZilla on an Ubuntu machine works fine and directory listing works as expected for both LIST/NLST and MLSD. Additionally, other FTP Clients for Windows work OK when using the MLSD command, so I'm hesitant to believe it's the server that's at fault.

I've attached a copy of the log (in Verbose mode) for your review, although I can't see any errors myself.

Please don't hesitate to let me know if you need further information.

Since a couple of versions the counter and log of said tabs do not work anymore.

FileZilla Client

Version: 3.49.1

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2020-07-15 Compiled with: x86_64-w64-mingw32-gcc (GCC) 8.3-win32 20190406 Compiler flags: -g -O2 -Wall

Linked against:

wxWidgets: 3.0.6 SQLite: 3.31.1 GnuTLS: 3.6.14

Operating system:

Name: Windows 10 (build 19041), 64-bit edition Version: 10.0 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 lm Settings dir: C:\Users\Karl\AppData\Roaming\FileZilla\

I use an old ftp hosted on a french free FTP server, specifically by free.fr (it's an ISP and offers ftp hosting). I have little clues how to know the FTP server version:

220 Serveur de mise a jour des pages perso de Free.fr version [Oct 30 2019 18:30:59]

I combine synchronized browsing with directory comparison.

For some reason, the file sizes, even though they are identical (I checked), are mismatched, which shows files being different when using the comparison feature. Those files are text files.

I suspect the issue might come from the FTP server sending erroneous, 1000 or 1024 rounded file sizes, or something similar.

OS is windows 10, filezilla 3.48.1.

I'm not sure if the filezilla team is very fond of this comparison feature, I'm not sure if it can be customized for my needs, but I really like this feature. The feature seems to work fine for jpg and PNG.

When opening an SFTP session and supplying the port number, the syntax of the generated open command is incorrect. See the trace below in bold bracketed by ''. It appears that the port 22 should be appended to the IP address with a ':' separator to be submitted or should be a separate user and open commands. The diagnostic should also output a complete message that says what is wrong with the syntax (column flagged somehow) to follow normative diagnostic logging standards.

09:37:51 Response: fzSftp started, protocol_version=8

09:37:51 Command: open "mstanton@50.224.132.17" 22

09:42:51 Error: Connection timed out after 300 seconds of inactivity 09:42:52 Error: Could not connect to server 12:34:41 Status: Disconnected from server 12:34:41 Status: Connecting to 50.224.132.17... 12:38:10 Response: fzSftp started, protocol_version=8

12:38:10 Command: open "mstanton@50.224.132.17" 22

12:38:10 Error: Connection attempt interrupted by user 12:38:10 Status: Disconnected from server 12:38:10 Status: Connecting to 50.224.132.17... 12:43:10 Response: fzSftp started, protocol_version=8

12:43:10 Command: open "mstanton@50.224.132.17" 22

12:43:10 Error: Connection timed out after 300 seconds of inactivity 12:43:11 Error: Could not connect to server 12:43:11 Status: Waiting to retry... 12:43:16 Status: Connecting to 50.224.132.17... 12:43:16 Response: fzSftp started, protocol_version=8

12:43:16 Command: open "mstanton@50.224.132.17" 22

12:48:16 Error: Connection timed out after 300 seconds of inactivity 12:48:17 Error: Could not connect to server

Hello,

I use Filezilla for 10 years uploading video to different stocks. Three weeks ago I lost ability to get any successful transfer to Shutterstock. Uploads to Adobestock are OK. Here below I explain the problem and copy the log.

• For three weeks I cannot get any positive transfer on Filezilla (Cyberduck shows the same problem) uploading my 4K video files mp4
• No problems with uploading to other footage stocks
• Filezilla version and my PC data is attached No1
• I tried all possible setting of FZ but no result. My usual setting you can see attached No2
• I tried to upload on three different PC – the same
• Transfer starts and proceeds with no problem, reaches 100%, waits and starts again. You can see screen shot of the waiting and the log in this moment attached No3
• If I change the time of the waiting still it will start again and again but later
• I have good internet by the way
• The transfer of the file was done twice then it dropped to the Fail box of Filezilla as you see attached No4 and No5. Below this letter can see the log of these two transfers and failure also I attach No 6 the screen shot of the file as it appeared on my SS Submit content page. I NEVER MANAGE TO RECEIVE SUCCESSFUL RESULT SHOWED BY FILEZILLA but the files are transferred. Corrupted or not I don’t know. But SS gives me failure note attached No7.
• I live in Turkey. Fethiye city, Mugla region. The transfer trial has been done 28 August 2020 around 16:40-17:10. I tried in different time different days. No result.

If you have any questions feel free to contact me marinabmw@… or whatsapp +905306008857.

I hope for your assistance because SS is failing to answer me.

Best regards, Maryna

LOG readings: Status: Resolving address of ftps.shutterstock.com Status: Connecting to 52.205.7.144:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Logged in Status: Retrieving directory listing... Status: Directory listing of "/" successful Status: Resolving address of ftps.shutterstock.com Status: Connecting to 52.205.7.144:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Logged in Status: Starting upload of C:\Users\Marina\Desktop\Fiezilla fail\Viewing kitchen worktop in Turkish style.mp4 Command: CWD / Response: 250 CWD command successful Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (18,212,16,26,196,192). Command: STOR Viewing kitchen worktop in Turkish style.mp4 Response: 150 Opening BINARY mode data connection for Viewing kitchen worktop in Turkish style.mp4 Error: Connection timed out after 40 seconds of inactivity Error: File transfer failed after transferring 58 890 988 bytes in 750 seconds Status: Resolving address of ftps.shutterstock.com Status: Connecting to 52.21.216.206:21... Status: Connection established, waiting for welcome message... Response: 220-Welcome to the Shutterstock FTP site. Response: To log in, use the email address and password associated with your Shutterstock Contributor account (​http://submit.shutterstock.com). Response: Files you upload via FTP will appear in your account when they have been processed by our system. To submit this content for review, navigate to the Content Editor, and enter the required information for each image or clip. Response: Response: NOTE: Response: - Filenames may contain only alphanumeric characters (A-Z, a-z, 0-9), spaces, commas, hyphens, periods, @ signs, and underlines. Response: - Files must be less than 4GB. Larger files will be rejected with a “426 Operation Not Permitted” error. Response: 220 Shutterstock FTP Site Command: AUTH TLS Response: 234 AUTH TLS successful Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Command: USER marinabmw@… Response: 331 Password required for marinabmw@… Command: PASS * Response: 230 User marinabmw@… logged in Command: OPTS UTF8 ON Response: 200 UTF8 set to on Command: PBSZ 0 Response: 200 PBSZ 0 successful Command: PROT P Response: 200 Protection set to Private Status: Logged in Status: Starting upload of C:\Users\Marina\Desktop\Fiezilla fail\Viewing kitchen worktop in Turkish style.mp4 Command: CWD / Response: 250 CWD command successful Status: Retrieving directory listing of "/"... Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (35,171,182,226,199,6). Command: MLSD Response: 150 Opening BINARY mode data connection for MLSD Response: 226 Transfer complete Command: PASV Response: 227 Entering Passive Mode (35,171,182,226,198,229). Command: STOR Viewing kitchen worktop in Turkish style.mp4 Response: 150 Opening BINARY mode data connection for Viewing kitchen worktop in Turkish style.mp4 Status: Disconnected from server: ECONNABORTED - Connection aborted Error: Connection timed out after 40 seconds of inactivity Error: File transfer failed after transferring 58 890 988 bytes in 747 seconds Status: Resolving address of ftps.shutterstock.com Status: Connecting to 3.217.192.145:21... Status: Connection established, waiting for welcome message... Response: 220-Welcome to the Shutterstock FTP site. Response: To log in, use the email address and password associated with your Shutterstock Contributor account (​http://submit.shutterstock.com). Response: Files you upload via FTP will appear in your account when they have been processed by our system. To submit this content for review, navigate to the Content Editor, and enter the required information for each image or clip. Response: Response: NOTE: Response: - Filenames may contain only alphanumeric characters (A-Z, a-z, 0-9), spaces, commas, hyphens, periods, @ signs, and underlines. Response: - Files must be less than 4GB. Larger files will be rejected with a “426 Operation Not Permitted” error. Response: 220 Shutterstock FTP Site Command: AUTH TLS Response: 234 AUTH TLS successful Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Command: USER marinabmw@… Response: 331 Password required for marinabmw@… Command: PASS * Response: 530 Login incorrect. Error: Critical file transfer error Status: Resolving address of ftps.shutterstock.com Status: Connecting to 3.217.192.145:21... Status: Connection established, waiting for welcome message... Response: 220-Welcome to the Shutterstock FTP site. Response: To log in, use the email address and password associated with your Shutterstock Contributor account (​http://submit.shutterstock.com). Response: Files you upload via FTP will appear in your account when they have been processed by our system. To submit this content for review, navigate to the Content Editor, and enter the required information for each image or clip. Response: Response: NOTE: Response: - Filenames may contain only alphanumeric characters (A-Z, a-z, 0-9), spaces, commas, hyphens, periods, @ signs, and underlines. Response: - Files must be less than 4GB. Larger files will be rejected with a “426 Operation Not Permitted” error. Response: 220 Shutterstock FTP Site Command: AUTH TLS Response: 234 AUTH TLS successful Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Command: USER marinabmw@… Response: 331 Password required for marinabmw@… Command: PASS * Response: 530 Login incorrect. Error: Critical file transfer error Status: Resolving address of ftps.shutterstock.com Status: Connecting to 3.217.192.145:21... Status: Connection established, waiting for welcome message... Response: 220-Welcome to the Shutterstock FTP site. Response: To log in, use the email address and password associated with your Shutterstock Contributor account (​http://submit.shutterstock.com). Response: Files you upload via FTP will appear in your account when they have been processed by our system. To submit this content for review, navigate to the Content Editor, and enter the required information for each image or clip. Response: Response: NOTE: Response: - Filenames may contain only alphanumeric characters (A-Z, a-z, 0-9), spaces, commas, hyphens, periods, @ signs, and underlines. Response: - Files must be less than 4GB. Larger files will be rejected with a “426 Operation Not Permitted” error. Response: 220 Shutterstock FTP Site Command: AUTH TLS Response: 234 AUTH TLS successful Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Command: USER marinabmw@… Response: 331 Password required for marinabmw@… Command: PASS * Response: 530 Login incorrect. Error: Critical file transfer error Status: Resolving address of ftps.shutterstock.com Status: Connecting to 3.217.192.145:21... Status: Connection established, waiting for welcome message... Response: 220-Welcome to the Shutterstock FTP site. Response: To log in, use the email address and password associated with your Shutterstock Contributor account (​http://submit.shutterstock.com). Response: Files you upload via FTP will appear in your account when they have been processed by our system. To submit this content for review, navigate to the Content Editor, and enter the required information for each image or clip. Response: Response: NOTE: Response: - Filenames may contain only alphanumeric characters (A-Z, a-z, 0-9), spaces, commas, hyphens, periods, @ signs, and underlines. Response: - Files must be less than 4GB. Larger files will be rejected with a “426 Operation Not Permitted” error. Response: 220 Shutterstock FTP Site Command: AUTH TLS Response: 234 AUTH TLS successful Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Command: USER marinabmw@… Response: 331 Password required for marinabmw@… Command: PASS * Response: 230 User marinabmw@… logged in Command: OPTS UTF8 ON Response: 200 UTF8 set to on Command: PBSZ 0 Response: 200 PBSZ 0 successful Command: PROT P Response: 200 Protection set to Private Status: Logged in Status: Retrieving directory listing of "/"... Command: CWD / Response: 250 CWD command successful Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (35,171,182,226,195,165). Command: MLSD Response: 150 Opening BINARY mode data connection for MLSD Response: 226 Transfer complete Status: Directory listing of "/" successful Status: Disconnected from server

While working on files, saving then switching to FileZilla (FZ), FZ will prompt a message "File has changed".

This has the option "Upload this file back to the server: [] Finish editing and delete local file"

As I was completing the task, the checkbox "Finish editing and delete local file" was checked, then it occurred to me that I wanted to change something.

I pressed escape, canceling the operation. For me it was a bit of a surprise that the Escape button and the X on the right corner basicly perform the "No" action - therefor deleting the file - instead of canceling the operation as a whole.

Action: Esc (cancel) Expectation: close prompt, don't perform any action. Reality: Alias for pressing the "No" button, executing the selected checkbox.

Just updated a couple of times and now can't resize the center post. Here's what I know, and what I'm able to do. ​https://www.screencast.com/t/PObeHvriSR

Any help is appreciated.

Info from About: FileZilla Pro

Version: 3.50.0

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2020-08-31 Compiled with: x86_64-w64-mingw32-gcc (GCC) 8.3-win32 20190406 Compiler flags: -O2 -g -Wall -Wextra -pedantic

Linked against:

wxWidgets: 3.0.6 SQLite: 3.31.1 GnuTLS: 3.6.14

Operating system:

Name: Windows 10 (build 19041), 64-bit edition Version: 10.0 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi bmi2 adx lm Settings dir: C:\Users\Cenay Nailor\AppData\Roaming\FileZilla\

Dear Team,

I am trying to login FileZilla it is not working before it is working fine ,Last 3 days an word's it is not working .Please help on this is ASAP.

Thanks & Regards, Subba Reddy.P 8184999469

see ​https://trac.filezilla-project.org/ticket/12251#comment:1

I would very much appreciate learning if it is possible for FileZilla 3.50.0 to list filenames in numerical order. The Church has 1127 Newsletters on site numbered nl001 to nl1127. The index on FileZilla does not list them in this order as you will note from the attachment FileZilla.jpg

Than you very much for your assistance. You have a wonderful program.

ags@…

Kind regards,

Anthony Grigor-scott

I found not working to connect ESXi SSH at 3.35.0 the error message is ======================================================= Status: Connecting to 192.168.xxx.xxx... Status: Using username "root". Status: Access denied Error: Authentication failed. Error: Critical error: Could not connect to server ======================================================= I also testing 3.47.2.1 with same error.

and I find my old unused PC using this old version (3.7.4.1), it can connect, then I find this old version to replace 3.35.0 ay my PC, then SSH connection is successful.

ESXi Server Version 6.5.0 Update 3

I noticed today an HMA VPN shortcut on my desktop. I did not install it.

Checking its directory in C:\Program Files, I find that it appeared on October 6. That is when I launched FileZilla after not having used it for a while. It prompted me to download and install an update to FileZilla, which I did.

Was HMA VPN bundled with that within-app update?

Thank you, Blake

Status: Connection established, waiting for welcome message... Response: 220 FTP Server ready. Command: AUTH TLS Response: 502 AUTH TLS successful Command: AUTH SSL Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of schooledu.co.in Status: Connecting to 194.59.164.72:21... Status: Connection established, waiting for welcome message... Response: 220 FTP Server ready. Command: AUTH TLS Response: 502 AUTH TLS successful Command: AUTH SSL Error: Could not connect to server

Configuration: disable update checks using Edit → Settings → Updates → FileZilla updates → Check for FileZilla updates automatically = Never Expected behaviour: no update checking Actual behaviour: a nag window appears titled “Check for Updates” with the message “Unfortunately information about the new update could not be retrieved. Either you or your system administrator has disabled checking for updates …”

The only two ways that the program can display this message are a) the program has psychic powers that allow it to magically know about updates without checking, or b) it checked for updates when explicitly instructed not to do so.

The program violates the aforementioned setting. If update checking is disabled, then update checking must not occur. Instead, the program checks for the update and then chooses not to tell you anything about it, as if that somehow constitutes not checking. If update checking is disabled, the program must refrain from making any attempt to check. Otherwise, that setting is virtually meaningless. The only thing it does do is prevent downloading the update installers, but if that is what it is intended to do, the setting needs to say “Download updates automatically and display update changelogs” with a notice below it that update checks cannot be disabled, because the user interface and behaviour must match each other. The program cannot be allowed to disobey the user’s instructions. If the setting exists, it must behave exactly as it indicates.

When I first start up the program I get an error message indicating: Couldn't add an image to the image list.

I am using Windows 10 and Filezilla Client version 3.5.10

Relates to a previous bug report that was reported 15 years ago

#1028 closed Bug report ASCII mode transfer corrupts files nix=>win

Text Lines that end with CR LF are having an additional CR added to the line

So the the Text Line ends with CR CR LF

In Hex - CR LF (Hex 0D0A) becomes CR CR LF (Hex 0D0D0A)

I have used FileZilla for about 20 years and this has never happened to me before.

Running FileZilla client on Windows 10. Accessing a Toshiba 4690 OS system. A file that should have existed was not being shown in FileZilla. I signed on to the 4690 OS system via Telnet and saw that the file size was listed as 4294967295 (which is effectively "-1"). I don't know what that really means, other than "big". I used the built-in Windows 10 FTP client to connect to the 4690 OS system and it showed those files having a size of -1. They were log files and had grown huge. I had to delete them and unfortunately I didn't upgrade to latest FileZilla (I'm running 3.50.0), nor did I enable additional logging to see what FileZilla might have displayed.

I am using version 3.51.0 of FileZilla Client on a Windows 7 PC. After quitting the Site Manager Ctrl-S dialog label persist in the upper left section of the desktop on top of all other windows. The only way to get rid of this is to restart the PC

I created a new username and password on my Plesk FTP page. In FileZilla, I created a new site profile “Internic” using the new username and password, as shown on the attached FTP setup.png screen shot. I then attempted to connect and got stuck at the "Initializing TLS..." line on the message log for about 8 minutes before being asked to verify the certificate and getting to the site files. If I disconnect (CTRL+D) without exiting the program and then reconnect, I get to the site right away. If I exit the program and start the program again and try to connect, I get stuck on the same "Initializing TLS..." line and it can take anywhere from 3 to 9 minutes before getting in. On the same computer and using the same program, a different site on a different server has exactly the same problems. This does not happen on a different computer on the same home network connecting to the two sites on different servers, running the same version of FileZilla. Connection time is almost instantaneous. This can happen at any time of the day or day of the week. I am attaching a text file of a verbose timestamped message log from another session, and a text file showing system and program information from the FileZilla “About…” panel. According to ftptest.net “Your server is working and assorted routers/firewalls have been correctly configured for explicit FTP over TLS as performed by this test. However there have been warnings about compatibility issues, not all users will be able to use your server. For maximum compatibility, consider resolving these warnings.” The only warning in the log was “Warning: The entered address does not resolve to an IPv6 address.” I am attaching a text file of a verbose timestamped message log from another session, and a text file showing system and program information from the FileZilla “About…” panel

Hello Team, When I am trying to access my FTP FileZilla Server from outside network, I am getting below error, not able to connect.It is working fine in company network with internal IP address. Satus: Connecting to 114.143.131.66:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Logged in Status: Retrieving directory listing... Status: Server sent passive reply with unroutable address. Using server address instead. Command: MLSD Response:425 Can't open data connection for transfer of "/" Error: Failed to retrieve directory listing Status: Connection closed by server

Please resolve this issue.

With Regards, Lalit Patil Meticulous Research, IT

9226729629,9422314434

Without entering a bucket name, the Client must do a ListBuckets but that might not be permitted. Also, I might only care about one bucket. I consider this a bug since it prevents me connecting to a bucket without ListBuckets permission.

Hi,

We just updated our Filezilla Pro (3.52.0.4) and sent a compressed file in WinRAR format (.rar) to an S3 bucket on AWS. The upload is successful and the download is successful, but when trying to extract the file it gives an error. We repeated the process several times and it doesn't work, and the compressed file on the source computer is unzipping normally. The problem is when we send the file. Since we sent and downloaded it through the AWS web interface and the file unzipped normally at the destination.

Please check.

I look forward and thanks.

Cristiano.

After installing the latest version of FileZilla client, the file timestamp data is no longer preserved on the transferred files. Verified that the option is still set in the transfer options.

I have been using v3.51 and earlier versions to upload files to a server running SSH-2.0-OpenSSH_7.4 to support sftp/ssh file transfers.

since updating to v3.52.05 (and also with 3.52.2), I have been unable to upload or download files from the server. It appears to write and then I will see an error that the file transfer failed, and then when it retries, it brings up the overwrite dialog to try to overwrite the file I just uploaded or downloaded - the file that is on the server after the initial upload is 0kb in size.

Trace:	DuplicateHandle failed
Trace:	CControlSocket::ResetOperation(2)
Trace:	CSftpFileTransferOpData::Reset(2) in state 4

I have been able to workaround by downgrading back to 3.51.0 for the time being.

It appears that for both the 3.52.2 uploads and downloads, the following message appears after the put/get command respectively:

Attaching files with the debug logs for both upload and download in each version.

I could not change into this directory. After SSHing into my server, I saw that the directory had a trailing space on the name.

Renaming the directory to remove the trailing space allowed FileZilla client to access the directory.

There has been issues with connection over TLS for some ISPs

Status:	Resolving address of server.XXXXXXX.com
Status:	Connecting to XX.XX.XX.XX:21...
Status:	Connection established, waiting for welcome message...
Response:	220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
Response:	220-You are user number 1 of 50 allowed.
Response:	220-Local time is now 03:04. Server port: 21.
Response:	220-This is a private system - No anonymous login
Response:	220-IPv6 connections are also welcome on this server.
Response:	220 You will be disconnected after 15 minutes of inactivity.
Command:	AUTH TLS
Response:	502 AUTH TLS OK.
Command:	AUTH SSL
Error:	Could not connect to server
Status:	Waiting to retry...

As of now I am not having any issues while connecting with FTP inbuilt application in Windows 10

If you have two instances of FZ open (eg you might have on two computers) and one fetches a directory listing before the other has finished uploading a file, when you download that file (certainly after timeout) FZ doesn't refetch the latest (final) size but assumes what it has is correct, and the ETA is incorrect. I think certainly once it's passed the projected size it should realise and fetch the correct size and the ETA should be updated, however it may be better in addition if it could check the size before downloading if: the timestamp of the file is close to when the directory was listed and the session had not uploaded it there, as that's a sure sign the size might be incorrect.

Cheers, David

When I try to connect an error pops up: Error loading xml file invalid xml file

I've double checked that data is correct. I have tried uninstalling and reinstalling, disabling my antivirus, clearing my cache, deleting each xml file in the app data and every time I get the same error.

Using the latest filezilla: 3.53.1 on Windows 10: Connecting to server : Ok Clicking on remote directories : Ok, Shows directory contents. Dragging a file from remote to local directory:

• Filezilla creates a new connection on the control channel.

This is probably not a problem on a real ftp server. But I am debugging a tiny server on an ESP32 controller. And this controller can only handle a single client at the time. So it does not handle the new connect attempt while the primary connection is still active.

As a result, the new connect times-out, and the file download fails.

I wonder why Filezilla makes a new connection. Should it not continue with the existing connection?

When an SSH server issues a keyboard-interactive authentication to the client and the "instruction" field contains an & (and) sign (e.g. in an URL) the and sign is duplicated. Furthermore, it adds a > sign after a certain length.

Filezilla:

| Please visit the following link to authenticate: | https://github.com/login/oauth/authorize?client_id=063fe6a5dd3849276f35&&login > =janoszen&&response_type=code&&state=73aaa57b018e4119a381da7b5a0fc06e 
| Please enter the code received:

OpenSSH:

Welcome to ContainerSSH!
Please visit the following link to authenticate:
https://github.com/login/oauth/authorize?client_id=063fe6a5dd3849276f35&login=janoszen&response_type=code&state=b7d0a882dae24d32b000993522b80dbf

Please enter the code received:

Please remove extra formatting from the challenge so links can be properly utilized.

Context: I'm the author of ContainerSSH and we are implementing OAuth2 authentication for SSH. The binaries for this feature are not released yet, but I'm happy to provide a testing server if needed.

I have used Filezilla for many years and never really had a problem until recently. I had noticed that one of my webpages had Chinese Charters added to the html code. This appeared to happen as I was downloading the from using Filezilla vs using Hostmonster.

www.ivytechengineering.com/CollaborativeEngineeringProjects

Hello,

I'd like to understand if this is a bug - it does very much look like one to me.

Scenario: FTP server behind NAT

Behavior without proxy: When using FTP passive mode, and the server replies with its real IP address, Filezilla ignores it, uses the original IP instead, and uses the port for data connection. This is absolutely correct.

Behavior with proxy: When using FTP passive mode, and the server replies with its real IP address, Filezilla send a new request to the proxy but uses the server reply. The proxy tries to contact the server's real IP, and (in most scenarios) fails.

I found this issue with FTPS, not plain FTP, but the implementation might be the same. It doesn't help that the traffic is encrypted, otherwise I could have found some workaround. But with encrypted traffic I have no chance to do so.

BR, Miguel

when connecting to my FritzBox 6490 FW7.25 with current FZ 3.53.1 Iam now getting the message: INSECURE FTP DATA CONNECTION. THIS SERVER DOES NOT SUPPORT TLS SESSION RESUMPTION ON THE DATA CONNECTION

With previous filezilla versions I do not get this messgage.

FileZilla Client crashes when trying to change file access rights when entering a digital code (example: 644) (checkboxes work), but entering numbers does not. Video: ​https://youtu.be/TyrpbjZrvVk

FileZilla Client 3.53.1

Hi, If you put Filezilla on the right of two screens, and make the right screen the default screen, and also open filezilla on the left screen... Then close filezilla and in Windows, change the screens so the left screen is dominant. Open filezilla, and it is not visible, it is on an imaginary screen to the left of the default screen. This does not happen on any other app I have tried. Tx Mark.

Updated to the RC of 3.54 today and when I connect to a server using sftp with key auth enabled, no matter what I put in as the key it doesn't let me login, I verified that capslock/etc was not on, and the same keyphrase works in putty. Regressing back to 3.53.1 allows me to connect again.

Turning on detailed logs doesn't show anything useful, unfortunately.

I've tried to look at logs on the server side, and, unless I'm looking at the wrong logs, there's also nothing really worthy of note there as well.

I have tried to load the latest version 3.52.2 but it has caused more problems. I now have to restart my PC if I close FileZilla and try to open it again, It then tells me to load the latest version again. Quite often now I am unable to View .cs and .json files. This is only happening with my IcedHost Server da-4.icedhost.com the other Server 152.170.239.3 works correctly every time. I have FileZilla on both my PC and Laptop and both have the same problem. Prior to trying to update all was fine.

When I open Site Manager, there is nowhere to enter the password for the site I am trying to connect to. I've checked settings and 'Save Passwords' is enabled. I've also tried FTP connection options as well as SFTP and the password field is nowhere to be found. It only asks me for hostname and user. What am I missing? I always had a password field before, in prior versions of Filezilla. Thank you.

从网上下载数据文件与原文件内容不一致

The File Permissions text box cause crash when changed

The download of FileZilla for Windows in the front page is infected with malware:

​https://download.filezilla-project.org/client/FileZilla_3.54.1_win64_sponsored-setup.exe

Windows Defender has removed the file on download.

Virustotal shows a number of detections, from adware to trojan: ​https://www.virustotal.com/gui/file/9c7d724fa2f7bed9f1967fae78eba83ad027c6b3431ac064fd56c91a2f179e42/detection

I have newest FZ I use FTP to manage Websites If I try connect to a Website FTP at ftpupload.net I get a Trojan Message what is out-going see screenshot: ​https://i.imgur.com/7375kQA.png

My PC is virus and trojan free (Malwarebytes prem buisness) So from where come a Trojan or is it a Bug again by FZ ? Need urgend a reply because I work here and cant work if these is not cleared or solved.

Thanks in advance Cheers

Bom dia, tudo bem? Estou falando do hospital Graacc sobre um erro acontecendo em uma máquina especifica com a última versão do FileZilla 3.55.1.

Acontece que quando o usuário vai mover o arquivo usando a ferramenta de puxar e arrastar o FileZilla fecha sem nenhuma mensagem de erro, simplesmente crasha. Temos em algumas máquinas a versão anterior e não apresenta erro e nessa em especifico na atualização está fechando. Tentei voltar agora a versão anterior e mesmo assim continua fechando.

Se puderem me alertar sobre algo ficarei muito grato, infelizmente não consigo capturar o erro porque ele não apresenta um, simplesmente fecha.

I have some directories where files are stored by version. It would be very nice if it would sort naturally: right now 1.3.3.10 lists before 1.3.3.5 for instance...

the downloading of the server not working properly. I checked everything in my computer but the speed is still not good. and because of which i am having so much problem. please resolve my issue as early as possible.

Hi,

1/ I have generated on Linux a key pair with ssh-keygen and a path-phrase. 2/ on windows 10 , I copied my private key 'id_rsa' and try to use it with FileZilla : he wants to convert it to .ppk (by the way why ???) , I say yes and ask my secret : I have only the path phrase : I type it and I get the error message on my french PC :

"impossible d'obtenir une réponse de fzputtygen"

(the program fzputtygen.exe is right under the Filezilla installed dir) and a id_rsa.ppk file at 0kB ! and impossible to transfert my files with that Filezilla ! regards

My micro-server (Fritz!Box) lacks some security features such as TLS session resumption. Each time I connect I have to allow this connection again. The bug is that the option checkbox "Always allow…" works only during the current session. The next time I start FileZilla, the pop-up windows appears again with unchecked option.

Connection to host works fine with FileZilla_3.52.2_win64. On installation of 3.56.0 connection fails with "GnuTLS error -8: A packet with illegal or unsupported version was received."

Reinstalling 3.52.2 restores ability to connect.

hello team, i am a filezilla user, recently i update the software to FileZilla_3.56.2 , after doing this FTP not working.

Status: Connecting to 162.241.85.69:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Command: USER giveuc2t Response: 331 User giveuc2t OK. Password required Command: PASS Response: 530 Login authentication failed Error: Critical error: Could not connect to server

for every FTP account same happening, please help me to connect FTP.

One more thing left local path folders & file not showing.

Workaround: Drop files from Windows Explorer into remote server folder on the right.

FileZilla Client

Version: 3.56.2

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2021-10-27 Compiled with: x86_64-w64-mingw32-gcc (GCC) 10-win32 20210110 Compiler flags: -O2 -g -Wall -Wextra -Wno-deprecated-copy -ffunction-sections -fdata-sections -Wno-cast-function-type

Linked against:

wxWidgets: 3.0.6 SQLite: 3.35.5 GnuTLS: 3.7.2

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx aes pclmulqdq rdrnd lm Settings dir: C:\Users\Valeri\AppData\Roaming\FileZilla\

22. 3.56.2 pulls 'Gnu TLS error -8: unsupported version" when connecting to a site whose highest active TLS version is 1.2. filezilla.xml has this:

3.56.0-rc1 (2021-09-29)

+ Right-clicking a queue tab header now opens the same context menu as right-clicking the correponding queue contents
+ By default, the minimum allowed TLS version is now TLS 1.2
+ Optionally, the systen trust store can be used for certificate verification
- FTP: Fixed an issue with key file conversion
- Fixed an issue loading servers not supporting session resumption from storage
</Setting>
		<Setting name="Window position and size">0 306 14 1402 924 </Setting>
		<Setting name="Minimum TLS Version">2</Setting>
		<Setting name="Trust system trust store">0</Setting>
		<Setting name="Greeting version">3.56.2</Setting>

The line for Minimum TLS Version is clearly in error -- surely this should be "1.2" not "2". Worse, when I make that change and run FileZilla, the number reverts to "2".

I get a message saying that it the file I wanted to drag to the server already exist. When I click cancel - I get a message saying the file transfer was successfully completed - which it is. So, it might be that the algorithm is trying to copy the same file twice?

Download an already existing file, when asked whether to overwrite or not answer with "Yes": the date and time of creation of the overwritten file will be of the previous file.

Hi,

I have updated the Filezilla recently and after update, the local folders are not visible. Unable to upload folders having files. It is uploading the empty folder only. I have to enter the folder and then upload the files individually in each folder.

Here is the details of client: FileZilla Client

Version: 3.56.2

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2021-10-27 Compiled with: x86_64-w64-mingw32-gcc (GCC) 10-win32 20210110 Compiler flags: -O2 -g -Wall -Wextra -Wno-deprecated-copy -ffunction-sections -fdata-sections -Wno-cast-function-type

Linked against:

wxWidgets: 3.0.6 SQLite: 3.35.5 GnuTLS: 3.7.2

Operating system:

Name: Windows 7 (build 7600), 64-bit edition Version: 6.1 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 lm Settings dir: C:\Users\Vijay\AppData\Roaming\FileZilla\

Please let me know how to revert this update. Because previous version was working perfectly.

Hello, my Client got an Problem where she couldnt log in in our FTP Server it worked before but now she only gets the error Failed to connect to the server, on other PCs it worked but for her not. Is it maybe because she is using a vpn to connect to our Server and using wlan that it is too slow.

best regards Adrian Reider

in the list of files or directories retrieved from the remote server, the date is sometimes not displayed correctly : a file changed 2021-12-01 is displayed 2021-01-12.

this creates download mistakes when I choose replace when newer

FileZilla Client

Version: 3.57.0

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2021-12-10 Compiled with: x86_64-w64-mingw32-gcc (GCC) 10-win32 20210110 Compiler flags: -O2 -g -Wall -Wextra -Wno-deprecated-copy -ffunction-sections -fdata-sections -Wno-cast-function-type

Linked against:

wxWidgets: 3.0.6 SQLite: 3.35.5 GnuTLS: 3.7.2

Operating system:

Name: Windows 10 (build 19043), 64-bit edition Version: 10.0 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx aes pclmulqdq rdrnd lm Settings dir: C:\Users\jean-paul\AppData\Roaming\FileZilla\

installed the new release version 3.57.0, the local site failed to load any directory or files.

2021-12-16 17:16:11 19888 1 Status: Resolving address of login.microsoftonline.com 2021-12-16 17:16:11 19888 1 Status: Connecting to 40.126.24.83:443... 2021-12-16 17:16:11 19888 1 Status: Connection established, initializing TLS... 2021-12-16 17:16:12 19888 1 Status: TLS connection established, sending HTTP request 2021-12-16 17:16:12 19888 1 Command: POST /common/oauth2/v2.0/token HTTP/1.1 2021-12-16 17:16:12 19888 1 Command: Accept: */* 2021-12-16 17:16:12 19888 1 Command: Connection: keep-alive 2021-12-16 17:16:12 19888 1 Command: Content-Length: 995 2021-12-16 17:16:12 19888 1 Command: Content-Type: application/x-www-form-urlencoded 2021-12-16 17:16:12 19888 1 Command: Host: login.microsoftonline.com:443 2021-12-16 17:16:12 19888 1 Command: Keep-Alive: 300 2021-12-16 17:16:12 19888 1 Command: User-Agent: FileZilla/3.57.0 2021-12-16 17:16:12 19888 1 Response: HTTP/1.1 401 Unauthorized 2021-12-16 17:16:12 19888 1 Response: Cache-Control: no-store, no-cache 2021-12-16 17:16:12 19888 1 Response: Pragma: no-cache 2021-12-16 17:16:12 19888 1 Response: Content-Type: application/json; charset=utf-8 2021-12-16 17:16:12 19888 1 Response: Expires: -1 2021-12-16 17:16:12 19888 1 Response: Strict-Transport-Security: max-age=31536000; includeSubDomains 2021-12-16 17:16:12 19888 1 Response: X-Content-Type-Options: nosniff 2021-12-16 17:16:12 19888 1 Response: P3P: CP="DSP CUR OTPi IND OTRi ONL FIN" 2021-12-16 17:16:12 19888 1 Response: x-ms-request-id: 1200d32a-a908-4fd4-96ef-42b6d59f2000 2021-12-16 17:16:12 19888 1 Response: x-ms-ests-server: 2.1.12261.14 - EUS ProdSlices 2021-12-16 17:16:12 19888 1 Response: Set-Cookie: fpc=Apa8c7DhgvlJrSHoQKLaJ_qZ8cOmAQAAAKuxTdkOAAAA; expires=Sat, 15-Jan-2022 22:16:12 GMT; path=/; secure; HttpOnly; SameSite=None 2021-12-16 17:16:12 19888 1 Response: Set-Cookie: x-ms-gateway-slice=estsfd; path=/; secure; samesite=none; httponly 2021-12-16 17:16:12 19888 1 Response: Set-Cookie: stsservicecookie=estsfd; path=/; secure; samesite=none; httponly 2021-12-16 17:16:12 19888 1 Response: Date: Thu, 16 Dec 2021 22:16:12 GMT 2021-12-16 17:16:12 19888 1 Response: Content-Length: 471 2021-12-16 17:16:12 19888 1 Error: Could not connect to server 2021-12-16 17:16:12 19888 1 Status: Waiting to retry... 2021-12-16 17:16:26 19888 1 Status: Resolving address of login.microsoftonline.com 2021-12-16 17:16:26 19888 1 Status: Connecting to 40.126.24.83:443... 2021-12-16 17:16:26 19888 1 Status: Connection established, initializing TLS... 2021-12-16 17:16:26 19888 1 Status: TLS connection established, sending HTTP request 2021-12-16 17:16:26 19888 1 Command: POST /common/oauth2/v2.0/token HTTP/1.1 2021-12-16 17:16:26 19888 1 Command: Accept: */* 2021-12-16 17:16:26 19888 1 Command: Connection: keep-alive 2021-12-16 17:16:26 19888 1 Command: Content-Length: 995 2021-12-16 17:16:26 19888 1 Command: Content-Type: application/x-www-form-urlencoded 2021-12-16 17:16:26 19888 1 Command: Host: login.microsoftonline.com:443 2021-12-16 17:16:26 19888 1 Command: Keep-Alive: 300 2021-12-16 17:16:26 19888 1 Command: User-Agent: FileZilla/3.57.0 2021-12-16 17:16:26 19888 1 Response: HTTP/1.1 401 Unauthorized 2021-12-16 17:16:26 19888 1 Response: Cache-Control: no-store, no-cache 2021-12-16 17:16:26 19888 1 Response: Pragma: no-cache 2021-12-16 17:16:26 19888 1 Response: Content-Type: application/json; charset=utf-8 2021-12-16 17:16:26 19888 1 Response: Expires: -1 2021-12-16 17:16:26 19888 1 Response: Strict-Transport-Security: max-age=31536000; includeSubDomains 2021-12-16 17:16:26 19888 1 Response: X-Content-Type-Options: nosniff 2021-12-16 17:16:26 19888 1 Response: P3P: CP="DSP CUR OTPi IND OTRi ONL FIN" 2021-12-16 17:16:26 19888 1 Response: x-ms-request-id: b750ca18-3973-4672-b8df-bba3fe652200 2021-12-16 17:16:26 19888 1 Response: x-ms-ests-server: 2.1.12261.14 - SCUS ProdSlices 2021-12-16 17:16:26 19888 1 Response: Set-Cookie: fpc=ArTxQSDEUWhBr0SZaS-dg82Z8cOmAQAAALmxTdkOAAAA; expires=Sat, 15-Jan-2022 22:16:26 GMT; path=/; secure; HttpOnly; SameSite=None 2021-12-16 17:16:26 19888 1 Response: Set-Cookie: x-ms-gateway-slice=estsfd; path=/; secure; samesite=none; httponly 2021-12-16 17:16:26 19888 1 Response: Set-Cookie: stsservicecookie=estsfd; path=/; secure; samesite=none; httponly 2021-12-16 17:16:26 19888 1 Response: Date: Thu, 16 Dec 2021 22:16:26 GMT 2021-12-16 17:16:26 19888 1 Response: Content-Length: 471 2021-12-16 17:16:26 19888 1 Error: Could not connect to server

Erreur : Erreur critique lors du transfert du fichier Erreur : Erreur GnuTLS -110 dans gnutls_record_recv: The TLS connection was non-properly terminated. Statut : Le serveur n'a pas correctement fermé la connexion TLS Erreur : Impossible de lire depuis le socket : ECONNABORTED - Connexion annulée Erreur : Déconnecté du serveur

So facing this error from couple of days,

initailly in the logs on the client - 234 Using authentication type TLS Status: Initializing TLS... and then I get the error of Error: Connection timed out after 40 seconds of inactivity Error: Could not connect to server

I have tried all the possible fixes available online but nothing works, please assist asap

I used xyplorer(third party application) instead of windows explorer Not too long ago, when drag & drop any file from filezill to xyplorer, it's success with no error. But! now, isn't working.

[Alert Error Dialog Message] Cloud not determine the target of the Drag&Drop operation. Either the shell extension is not installed properly or you didn't drop the file into an Explorer window.

And, a directory is generated on the xyplorer window which name is 'fz3-16414476052330'

I hope to solve this problem, Please help me.

In windows 11, I have enabled Windows's Long Path and having a LONG PATH enabled ftp server, when using FileZilla Client, somehow the file is not uploaded into intended long path dir, the maximum length of the dir that i can upload a file into is around below 1.024 characters.

So for example I am uploading a file into a dir in the ftp server which having length of 1.822 characters, filezilla client will cut off the directory and will uploaded it into below 1.024 characters length directory, instead of in the 1.822 character length directory.

How to overcome the 1.024 character length directory into 32.767 character length (​https://docs.microsoft.com/en-us/windows/win32/fileio/maximum-file-path-limitation?tabs=cmd), 32.767 is the new maximum total characters path length .

Bonjour, Votre logiciel refuse d’envoyer un fichier depuis chez moi sur mon site internet as moi. Comment corriger ça ? Sont message d’erreur : Commande : STOR WinVer.exe Réponse : 150 Opening BINARY mode data connection for WinVer.exe Réponse : 550 Virus Detected and Removed: Win.Trojan.Gdsda-6878765-0 Comment transféré ce logiciel créer par moi sans aucun virus ! Eric Gontier

using filezilla to download directories from a openVMS system. The OpenVMS system has a directory named "CON". filezilla creates a directory in windows called "CON" when I ftp the directory but it causes issue since this is an invalid directory name. Explorer wouldn't do anything when I tried to delete the 'CON' directory, cmd.exe gave an 'access is denied' when I would try to remove the directory. Checking security and trying to do anything on the folder that was created would just result in various errors about access denied, unexpected error, undetermined error etc. Researching I found that there certain keywords that are not allowed to be used as directory names and "CON" is one of those. I was able to eventually remove the directory but I had to search around to find a specific rd command to do this as the other options (rd, rmdir, explorer) wouldn't remove the directory.

I am unable to log in my ftp account using filezilla. Getting error "Connection attempt failed with "ETIMEDOUT - Connection attempt timed out"."

I tried to log in by site manager option by selecting plain ftp(insecure) option but unable to log in.

I Installed a new version of filezilla still getting same error.

Please help out!

I am using PortableApps version and each start warning me about "unclean" shutdown and need re-open and start again