Custom Query (8214 matches)

The idle time is WAY to short, but to make it worse, there is no way for the user to change this. A very strange omission! Many people probably falsely assume that they can change the "time out" setting, but this is only for transfers, not idle time. Why not let the user adjust this? I am tired of, every 30 seconds, having to re-connect and navigate back to the subdirectory on the server before I can ftp a file again. Thanks for hearing my rant - and yes I kind of would call this a "bug" :-)

This is for version 3.2.0 (and the previosu one).

I recently ran into a problem with the latest version of FileZilla Server (0.9.30).

I use the 'Autoban' feature, which uses the default of 5 failed attempts and bans for 999 hours. One of my accounts had a problem where they were using the wrong password and their account was banned.

I went into the FileZilla Server interface and removed their IP from the filter list, however they were still blocked. I then clicked the lightening bolt icon to take the server offline and then put it back online. They were still banned.

I then went into the Windows Services and restarted the FileZilla Server service itself, which fixed the issue.

So, there is an underlying bug here, however even with that, shouldn't clicking the lightening bolt stop and start the service? (Right now it looks like there is another 'level' which doesn't need to be there.)

When attempting to open a folder on a remote sftp system, if the folder has a large number of files within, an error is generated and you do not get to review or navigate to that folder.

Below is the command list that is displayed.

Response: Current directory is: "/" Command: ls Status: Listing directory / Status: Calculating timezone offset of server... Command: mtime "AutomationTest" Response: 1233849901 Status: Timezone offsets: Server: -18001 seconds. Local: -18000 seconds. Difference: 1 seconds. Status: Directory listing successful Status: Retrieving directory listing... Command: cd "AutomationTest" Response: New directory is: "/AutomationTest" Command: ls Status: Listing directory /AutomationTest Error: No valid incoming packet found Error: Failed to retrieve directory listing

The folder in question can have upwards of some 5000 files at times.

No testing other than emptying the folder in question has been done to learn what that high limit might be.

Perhaps solution in this unusual case would be to only present partial list? or perhaps change to directory, but do not attempt to display entire contents?

If nothing else, being able to navigate to the folder at a minimum is important.

hi,

i want to change the permission of my files. but when i change it into chmod777 , the status describes that " 500 'SITE CHMOD 777 filename.php': command not understood "

due to this problem, i cannot upload any kind of forms and other files like poll system.

your help would be most appreciated.

I did not want to up date as I am in the middle of a huge project but after I said no to update the program locked up.

Ok so I did the u/d bam it doesn't work at all now freezes right up.

when I try to shut down the computer the send error and end program go into a tango together......

I'm not furious just very disappointed

please help NOW

i cant go up past the c: to my computer. so i can see all my drives.

I get the error message: Call-list.2009xls cannot be opened. The associated program(WX_DDE#"C:\Program Files\Microsoft Office\Office12\EXCEL.EXE"\e#Excel#systen#[open("Call_List_2009.xls")]) could not be found. Please check your file type associations.

Yikes! How do I get back to the last version? Can I delete this last update and go back to another version? Thank you for your help! Angie

Exporting the Filezilla.xml from the PC and importing it into Filezilla for Apple Mac crashes.

When a project is listed in the server manager, and has a local directory in PC format inserted (so let's say c:\projects\www.kfz.net ) and your are moving your data to the mac filezilla is crashing because he can not find the c: drive.

Maybe it make sense to check for PC drives and remove the entries and set them to empty when a user is importing the filezilla.xml on a mac.

Axel From ​http://www.kfz.net

Be able to right-click in the interface sections displaying server folders/files and be able to create a blank text file (or via some other quick-ish means).

Reason: As a developer I frequently find it annoying when I'm creating many new files for various things and I have to create/keep a blank file around on my computer and drag it onto the server every time I need one.

I get this error when I try to open my www folder on the server. Here are the details: Command: PWD Response: 257 "/www" is current directory. Command: CDUP Response: 250 CWD command successful. Command: PWD Response: 257 "/" is current directory. Status: Directory listing successful Status: Retrieving directory listing... Command: CWD /www Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (207,159,146,172,184,71). Command: LIST Response: 125 Data connection already open; Transfer starting. Error: Transfer connection interrupted: ECONNABORTED - Connection aborted Response: 550 .: An established connection was aborted by the software in your host machine. Error: Failed to retrieve directory listing

IF A: is empty (no floppy), the arrows cannot get you passed the floppy..

if possible, a blank listing or a default (C:\) list could appear instead.

Sorry, prefer keyboard programs, but can use mouse if necessary.

Great program!

Open Program, Tab to drive list, arrow down to A:, but gets returned to my computer instead. Pressing C or D don't allow you to jump past it either...

Not major. Thanks!

If the files in the remote site are zip files, Filezilla see them as directories and the file transfer is failed.

We exchanged today through my filezilla client with a trusty friend some data (video + audio video files the day before). We had both the password for this common server on my machine (he is in paris me in the south west of france, 2 different locations and machines), ready that we were to only use it for this exchange and re-configurate later the server. Unfortunately, when i deleted the whole files, it remained 2 in a "prefs" of the public_html: 550 Prohibited file name: .pureftpd-upload.49a01112.15.4127.1db34fbf and .pureftpd-upload.49a00928.15.1f63.841bf5d1, both cant be retrieved in anyways, match my whole hard disk when compared to the local server (which ever is selected); cannot delete or rename them. As well, trying to upload these files got me a critical error. DESPITE IT, WE HAD NO PB TRANSFEERING THE FILES ONE WAY OR THE OTHER (but is this procedure allowed? i doubt it ... now).

I would like to know: -if this procedure is allowed or forbidden -if i can change my password keeping the same host name on the local server -if these 2 files may harm or not the security of the exchanges (in normal conditions and in case i could change my password)

• if they could have been introduced here to hack voluntarly my server a3356674 hosted @ 216.108.235.38 (distant) or if it is just a consequence of a dysfunctional connexion and exchange;
• if i order to sharpen risks in the future i should prefer to open a new account (new host name)?

I should add that i can delete with no pb my other accounts, one being hosted at the same root, with the same name of server a3356674, presenting the same characteristic, and this one too (it was unchanged when i reinstall filezilla and reconnect my local server)

I ask you to forgive me for this way to practice filezilla (i know pass exchange is never a safe way), but were not very used to it and it was a pretty much emergent work, that finaly we success to provide in the deadlines, and with the only help of this very practical soft i wish to keep in my favourites...

list of event follows:

Statut: Connexion à 216.108.235.38:21... Statut: Connexion établie, attente du message d'accueil... Réponse: 220---------- Welcome to Pure-FTPd [TLS] ---------- Réponse: 220-You are user number 21 of 500 allowed. Réponse: 220-Local time is now 17:41. Server port: 21. Réponse: 220-This is a private system - No anonymous login Réponse: 220 You will be disconnected after 3 minutes of inactivity. Commande: USER a3356674 Réponse: 331 User a3356674 OK. Password required Commande: PASS Réponse: 230-User a3356674 has group access to: a3356674 Réponse: 230-OK. Current restricted directory is / Réponse: 230-51 files used (0%) - authorized: 6000 files Réponse: 230 428152 Kbytes used (27%) - authorized: 1536000 Kb Commande: SYST Réponse: 215 UNIX Type: L8 Commande: FEAT Réponse: 211-Extensions supported: Réponse: EPRT Réponse: IDLE Réponse: MDTM Réponse: SIZE Réponse: REST STREAM Réponse: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; Réponse: MLSD Réponse: ESTP Réponse: PASV Réponse: EPSV Réponse: SPSV Réponse: ESTA Réponse: AUTH TLS Réponse: PBSZ Réponse: PROT Réponse: 211 End. Statut: Connecté Statut: Récupération du contenu du dossier... Commande: PWD Réponse: 257 "/" is your current location Commande: TYPE I Réponse: 200 TYPE is now 8-bit binary Commande: PASV Réponse: 227 Entering Passive Mode (216,108,235,38,33,86) Commande: LIST Réponse: 150 Accepted data connection Réponse: 226-ASCII Réponse: 226-Options: -a -l Réponse: 226 7 matches total Commande: PASV Réponse: 227 Entering Passive Mode (216,108,235,38,7,130) Commande: LIST -a Réponse: 150 Accepted data connection Réponse: 226-ASCII Réponse: 226-Options: -a -l Réponse: 226 7 matches total Trace: Server seems to support LIST -a Statut: Calcul du décalage horaire du serveur... Commande: MDTM .ftpquota Réponse: 213 20090304195736 Statut: Décalage du fuseau horaire : Serveur : -28800 secondes, Local : 0 secondes. Différence : 28800 secondes. Statut: Succès de la lecture du contenu du dossier Statut: Récupération du contenu du dossier... Commande: CWD public_html Réponse: 250 OK. Current directory is /public_html Commande: PWD Réponse: 257 "/public_html" is your current location Commande: PASV Réponse: 227 Entering Passive Mode (216,108,235,38,130,228) Commande: LIST -a Réponse: 150 Accepted data connection Réponse: 226-ASCII Réponse: 226-Options: -a -l Réponse: 226 3 matches total Statut: Succès de la lecture du contenu du dossier Statut: Récupération du contenu du dossier... Commande: CWD public_html Réponse: 250 OK. Current directory is /public_html/public_html Commande: PWD Réponse: 257 "/public_html/public_html" is your current location Commande: PASV Réponse: 227 Entering Passive Mode (216,108,235,38,180,61) Commande: LIST -a Réponse: 150 Accepted data connection Réponse: 226-ASCII Réponse: 226-Options: -a -l Réponse: 226 3 matches total Statut: Succès de la lecture du contenu du dossier Statut: Récupération du contenu du dossier... Commande: CWD prefs Réponse: 250 OK. Current directory is /public_html/public_html/prefs Commande: PWD Réponse: 257 "/public_html/public_html/prefs" is your current location Commande: PASV Réponse: 227 Entering Passive Mode (216,108,235,38,133,30) Commande: LIST -a Réponse: 150 Accepted data connection Réponse: 226-ASCII Réponse: 226-Options: -a -l Réponse: 226 4 matches total Statut: Succès de la lecture du contenu du dossier Commande: DELE .pureftpd-upload.49a00928.15.1f63.841bf5d1 Réponse: 550 Prohibited file name: .pureftpd-upload.49a00928.15.1f63.841bf5d1 Commande: DELE .pureftpd-upload.49a01112.15.4127.1db34fbf Réponse: 550 Prohibited file name: .pureftpd-upload.49a01112.15.4127.1db34fbf Statut: Récupération du contenu du dossier... Commande: CDUP Réponse: 250 OK. Current directory is /public_html/public_html Commande: PWD Réponse: 257 "/public_html/public_html" is your current location Statut: Succès de la lecture du contenu du dossier Statut: Récupération du contenu du dossier... Commande: CWD /public_html/public_html/prefs Réponse: 250 OK. Current directory is /public_html/public_html/prefs Commande: PASV Réponse: 227 Entering Passive Mode (216,108,235,38,81,55) Commande: LIST -a Réponse: 150 Accepted data connection Réponse: 226-ASCII Réponse: 226-Options: -a -l Réponse: 226 4 matches total Statut: Succès de la lecture du contenu du dossier Statut: Connexion à 216.108.235.38:21... Statut: Connexion établie, attente du message d'accueil... Réponse: 220---------- Welcome to Pure-FTPd [TLS] ---------- Réponse: 220-You are user number 21 of 500 allowed. Réponse: 220-Local time is now 17:42. Server port: 21. Réponse: 220-This is a private system - No anonymous login Réponse: 220 You will be disconnected after 3 minutes of inactivity. Commande: USER a3356674 Réponse: 331 User a3356674 OK. Password required Commande: PASS Réponse: 230-User a3356674 has group access to: a3356674 Réponse: 230-OK. Current restricted directory is / Réponse: 230-51 files used (0%) - authorized: 6000 files Réponse: 230 428152 Kbytes used (27%) - authorized: 1536000 Kb Statut: Connecté Statut: Démarrage du téléchargement de /public_html/public_html/prefs/.pureftpd-upload.49a00928.15.1f63.841bf5d1 Commande: CWD /public_html/public_html/prefs Réponse: 250 OK. Current directory is /public_html/public_html/prefs Commande: PWD Réponse: 257 "/public_html/public_html/prefs" is your current location Commande: TYPE A Réponse: 200 TYPE is now ASCII Commande: PASV Réponse: 227 Entering Passive Mode (216,108,235,38,71,33) Commande: RETR .pureftpd-upload.49a00928.15.1f63.841bf5d1 Réponse: 550 Prohibited file name: .pureftpd-upload.49a00928.15.1f63.841bf5d1 Erreur: Erreur critique Statut: Démarrage du téléchargement de /public_html/public_html/prefs/.pureftpd-upload.49a01112.15.4127.1db34fbf Commande: PASV Réponse: 227 Entering Passive Mode (216,108,235,38,7,89) Commande: RETR .pureftpd-upload.49a01112.15.4127.1db34fbf Réponse: 550 Prohibited file name: .pureftpd-upload.49a01112.15.4127.1db34fbf Erreur: Erreur critique Statut: Récupération du contenu du dossier... Commande: CWD /lenvelopp.mp3 Réponse: 250 OK. Current directory is /lenvelopp.mp3 Commande: PWD Réponse: 257 "/lenvelopp.mp3" is your current location Commande: PASV Réponse: 227 Entering Passive Mode (216,108,235,38,126,131) Commande: LIST -a Réponse: 150 Accepted data connection Réponse: 226-ASCII Réponse: 226-Options: -a -l Réponse: 226 2 matches total Statut: Succès de la lecture du contenu du dossier Statut: Récupération du contenu du dossier... Commande: CWD /urh.htm Réponse: 250 OK. Current directory is /urh.htm Commande: PWD Réponse: 257 "/urh.htm" is your current location Commande: PASV Réponse: 227 Entering Passive Mode (216,108,235,38,90,182) Commande: LIST -a Réponse: 150 Accepted data connection Réponse: 226-ASCII Réponse: 226-Options: -a -l Réponse: 226 2 matches total Statut: Succès de la lecture du contenu du dossier Statut: Récupération du contenu du dossier... Commande: CWD /public_html Réponse: 250 OK. Current directory is /public_html Commande: PWD Réponse: 257 "/public_html" is your current location Statut: Succès de la lecture du contenu du dossier Statut: Déconnecté du serveur

This is technically not new - it was well described in Ticket #1414, but that ticket was timed out by the tracker. After the setup app downloads (I put it on the desktop because I know I'll have to click it), it attempts to start but fails with unknown error 193. This is on Windows XP SP3, and I have Panda for Desktops as my antivirus.

From what I can tell on Google, the error code 193 means "%1 is not a valid win32 process."

No biggie, just a nuisance, and it's been that way ever since I discovered your wonderful Filezilla client last summer.

Filezilla client crashes reconstructible if I try to a File with apostrophes in the name.

AppName: filezilla.exe
AppVer: 3.2.2.1
ModName: filezilla.exe
ModVer: 3.2.2.1
Offset: 0054f3d9

Hello i can no longer access my account; at the connection, the user name is accepted, but with the password, that remains frozen, and then i displays the following message: "Resolution of the address of abderrezak.freehost10.com Status: "Resolution of the address of abderrezak.freehost10.com Status: Connecting to 74.63.216.132:21... Status: connection is established, awaiting the welcome message... Answer: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Answer: 220-You are user number 40 of 50 allowed. Answer: 220-Local time is now 05:37. Server port: 21. Answer: 220-This is a private system - No anonymous login Answer: 220-IPv6 connections are also welcome on this server. Answer: 220 You will be disconnected after 15 minutes of inactivity. Commande: USER abderrezak Réponse: 331 User abderrezak OK. Password required Commande: PASS * Réponse: 530 Login authentication failed Error: impossible to establish a connection to server."

And I have not changed my password; that is what I do? Thank you. For your information, i have uploaded with this account my database please, help me

I dont know if it's only a FileZilla problem but it came up two times after i used the programm. All entries in the menus are black (black font and black background) until i move the mouse over them. THen they become visible. The problem exists now in all popup menus of my operating system (win xp sp3). Entries are black when i open a popup...very annoying. It's NOT a problem of a visual style!

New website - www.TheCrossingsLancasterPA.com / I did not build the site and am not a "techie." / I can make text corrections and update the site using FileZilla. That part works fine. / I need to be able to post mp3 files of Sunday teachings / When I use FileZilla, it takes the normal amount of time and it appears as though it is posting to the website / When the process is complete, on the website side, it shows "0" file size / I send the exact same sound file to the guy who built my site and he is able to upload it using FileZilla. / He uses FileZilla and has guided me to do the same / He is not the maintainer of the site and I have to be / What do I need to do or to adjust so that I can post the mp3 files from here?

Hi i gone through the settings of filezilla server and configured what you have given in the configuration settings, problem is i can able to login to filezilla server where i have hosted the site and pages loading successfull when i try to access the site error is coming the error is : Transfer channel can't be opened. Reason: No connection could be made because the target machine actively refused it. Error: Download failed.

Please resolve the problem ASAP Thanks Hari

Hi, this is not really a bug, is a suggestion to improve the interface.

In a file transfer, when a file already exist, FileZilla ask if the file must be replaced. All is ok, but the order of files i think is wrong.

First (upper) shows information of the file to by copied, and after (below) shows information of the file to be replaced.

In Windows, this kind of question shows first the older file (or whatever) and then the new file.

I had an older version of FileZilla, when it was updated I became confused when ask me in this new way. Why you do this ?

Best regards pam

The issue is dependant on the 'sum of the size of filenames'. If the sum of the size of filenames in the FTP folder is up to 21.6Kb, the file adapter is picking files. 657files - not picking -- 22 KB 21,723 bytes[Sum of the 'filename' size] 656files - picking -- 21,684 bytes[Sum of the 'filename' size]

Hi,

I think it would be really nice, if you made it possible to transfer a file between to servers, so you didnt have to first download file(s), disconnect, connect to the other server and upload.

If you could make it possible to view one server in the left 'window/table' and another server in the right window.

I dont know a decent way to send files between to servers, without using a third server/computer, which i dont suppose you know either.

The workaround would be connecting to both servers, and when the user wants to transfer the file(s), it downloaded them to the users computer and then, without the user doing anything, uploaded them to the second server.

When exporting (updated) Site Managing Entries from one client (v. 3.2.3 XP in this case) to the other, which contains this entries already (v.3.2.1 Vista in this case) duplicate entries are being created in "My Sites" folder. When importing Site Managing entries from 3.2.3 (XP) to 3.2.2.1 (Vista) duplicate entires are created.

The update dialog is cut off on the right side on Mac OS X. See attachment.

To reproduce the issue,

Open remote server connection (FTP) Upload a file that has been changed locally (file size should be different). Note the file size shown in the dialog box that confirms overwrite. After uploading the changed file, make more changes to the same file locally, and initiate upload again. This time the overwrite window will show the ORIGINAL file size, not the new changed file size that got changed because u uploaded new file in step(2)

I'm trying to create a utility for creating an XML file from a excel file for import of a queue setup in FileZilla. I've got everything but the remote server path. Example:

If I try and transfer images in an Images Folder all the images get sent to the root. I can't figure out how to create folders and the folder structure used by FileZilla. I exported a queue I created with filezilla to see the xml source and there are strange numbers used Example:

<File>

<LocalFile>C:\Documents and Settings\Default\Desktop\template-2\CSS\_styles.css</LocalFile> <RemoteFile>_styles.css</RemoteFile> <RemotePath>1 0 11 public_html 3 CSS</RemotePath> <Download>0</Download> <Size>7831</Size> <TransferMode>0</TransferMode> </File>

For the RemotePath why is there a [ 1 0 11 ] also before the folder CSS why is there a [ 3 ] ? why wouldn't the path be simple like: public_html/CSS/

I am using Filezilla, latest release, and are seeing connections being left open to the server after I have clicked on disconnect. The last command I do see coming across to the server is the LIST command, and that is were it is hanging.

The server is WS FTP 7, running SSL.

Below is an output of the log with debug on from Filezilla.

My system I am running Vista Ultimate X64. When using other clients the connections are closing out properly.

Status: Resolving address of ftp.ezpaycenters.net Status: Connecting to 64.143.96.59:990... Status: Connection established, initializing TLS... Trace: CTlsSocket::Handshake() Trace: CTlsSocket::Handshake() Trace: CTlsSocket::Handshake() Trace: CTlsSocket::Handshake() Trace: Handshake successful Trace: Cipher: AES-128-CBC, MAC: SHA1 Status: Verifying certificate... Trace: CFtpControlSocket::SendNextCommand() Status: TLS/SSL connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220 ftp.ezpaycenters.net X2 WS_FTP Server 7.0(44971704) Trace: CFtpControlSocket::SendNextCommand() Command: USER nareggiej Trace: CFtpControlSocket::OnReceive() Response: 331 Enter password Trace: CFtpControlSocket::SendNextCommand() Command: PASS Trace: CFtpControlSocket::OnReceive() Response: 230 User logged in Trace: CFtpControlSocket::SendNextCommand() Command: SYST Trace: CFtpControlSocket::OnReceive() Response: 215 UNIX Trace: CFtpControlSocket::SendNextCommand() Command: FEAT Trace: CFtpControlSocket::OnReceive() Response: 211-Extensions supported Response: SIZE Response: XMD5 Response: XSHA1 Response: XSHA256 Response: XSHA512 Response: XQUOTA Response: LANG EN, ES, FR, GE Response: MDTM Response: MLST size*;type*;perm*;create*;modify*; Response: REST STREAM Response: TVFS Response: UTF8 Response: AUTH SSL;TLS-P; Response: PBSZ Response: PROT C;P; Response: 211 end Trace: CFtpControlSocket::SendNextCommand() Command: PBSZ 0 Trace: CFtpControlSocket::OnReceive() Response: 200 PBSZ=0 Trace: CFtpControlSocket::SendNextCommand() Command: PROT P Trace: CFtpControlSocket::OnReceive() Response: 200 PRIVATE data channel protection level set Status: Connected Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Retrieving directory listing... Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/users/nareggiej" is current directory Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: TYPE I Trace: CFtpControlSocket::OnReceive() Response: 200 Transfer mode set to BINARY Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (64,143,96,59,254,106). Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CTlsSocket::Handshake() Trace: CTlsSocket::Handshake() Trace: CFtpControlSocket::OnReceive() Response: 125 Transferring directory Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTlsSocket::Handshake() Trace: Handshake successful Trace: Session resumed Trace: Cipher: AES-128-CBC, MAC: SHA1 Trace: CTransferSocket::OnConnect Trace: CTlsSocket::OnSocketEvent(): pending data, postponing close event Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer completed Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Disconnected from server Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66)

Hi. Recently I had to re-install my entire system (Win XP Pro SP2), but I was stupid enough to forget to export my site manager before that. So now I have a new installation of Filezilla and the copy of the installed files as they were on the previous installation of the software. As I don't have the exported xml file of the original site manager, as mentioned, is there still a way for me to get all the ftp sites I had on the previous installation of Filezilla, without having to add them all over again in the current one? Thanks a lot in advance.

The detection method used by the "Open" menu entry when right clicking on the Local files list seems to be flawed. On video files associated with Video Lan Client it reports:

The file 'E:\folder\file.avi' could not be opened: No program has been associated on your system with this file type.

Double clicking the video files in Windows explorer or Total Commander works and VLC opens the video.

For other extensions unrelated to Video Lan Client, like .txt, .doc, .pdf it works properly.

The OS is Windows 2003 Standard, 32bit.

I'm willing to run debug versions of Filezilla, just let me know.

If it helps, here are some registry entries: HKCR\.avi\(Default) = VLC.avi HKCR\VLC.avi\(Default) = VLC media file (.avi) HKCR\VLC.avi\shell\(Default) = Play HKCR\VLC.avi\shell\Play\(Default) = Play HKCR\VLC.avi\shell\Play\command\(Default) = "C:\Program Files\VideoLAN\VLC\vlc.exe" --started-from-file "%1"

I have configured my ProFTPD correct for working behind a firewall. So MasqueradeAddress and PassivePorts is set. Also a normal not encrypted connection is working in pasv-mode without any problems.

But using FTPES with TLS-Encryption always failed. There are several descriptions that this is a known bug and should be fixed in future Filezilla-versions. But now i am using a "future-version" 3.2.3.1 and it is still not working. :-(

Here the output from the connection: ====================================

Status: Auflösen der IP-Adresse für mydomain.mydyn.de Status: Verbinde mit 84.60.43.26:21... Status: Verbindung hergestellt, warte auf Willkommensnachricht... Antwort: 220 FTP server ready. Befehl: AUTH TLS Antwort: 234 AUTH TLS successful Status: Initialisiere TLS... Status: Überprüfe Zertifikat... Befehl: USER intern Status: TLS/SSL-Verbindung hergestellt. Antwort: 331 Password required for intern. Befehl: PASS Antwort: 230 User intern logged in. Befehl: PBSZ 0 Antwort: 200 PBSZ 0 successful Befehl: PROT P Antwort: 200 Protection set to Private Status: Verbunden Status: Empfange Verzeichnisinhalt... Befehl: PWD Antwort: 257 "/" is current directory. Befehl: TYPE I Antwort: 200 Type set to I Befehl: PASV Antwort: 227 Entering Passive Mode (192,168,1,3,53,66). Status: Vom Server gesendete Adresse für den Passiv-Modus ist nicht routingfähig. Benutze stattdessen die Serveradresse. Befehl: LIST Antwort: 150 Opening ASCII mode data connection for file list Status: Server hat die TLS-Verbindung nicht ordnungsgemäß geschlossen Fehler: Could not read from transfer socket: ECONNABORTED - Connection aborted Antwort: 226 Transfer complete. Fehler: Verzeichnisinhalt konnte nicht empfangen werden

I upgraded to 3.2.3.1 yesterday and then uploaded a page. My navigation bar is no longer viewable. I find that even when I reload a page with a previously viewable navigation bar (and have not made any edits to the page), that page is also without a navigation bar.

Have you heard of this problem before? I couldn't find anything in your tickets or wiki.

I am working on a site which was constructed using FrontPage (I apologize) and has .asp extensions.

I would like to propose a patch for a bug ticket 4199. The bug was the value of maxMultiple was set to not 0 upon checkbox of enabling limit number simultaneous connections. The patch follows the default action of the UI of setting maxMultiple to 1 upon the checkbox for enabling simultaneous connections.

I've attached a diff file of the changes.

please add a option for each account to limit the max available size of folder.

Hello everybody.

is a version of filezilla available, there can controlled with Visual Basic or above Command Line.

Many Thanks

Dear, first of all thanking you for developing such a nice client that also free but there is problem/bug with this software that when i want/try to upload my large video or media files to archive.org and if there is any disturbance in net connection then it will restart the upload instead of starting upload from the last position. or you can say there is need of a pause and resume button which can allow us to upload the large video files with the facility to PAUSE/RESUME

Thanking You Hitesh

The uninstall icon is disabled - tried to us my windows XP control panel to remove - unable

PLEASE ADVISE

Thank you,

When connecting to 1 ftp server I receive an error after it logs me in that it can not retreive the directory listing. See Attached. I am currently running 3.2.4.1

It only occurs on my WAN. On my cable modem at home, it connects and transfers with no error. I spoke with our network data center and they are showing no "backtalk" from the firewall or the remote server. This has always worked until I loaded your software update about a week ago (version before this one). When I use my MAC to connect, It has no problems. No problems with DOS or Windows explorer.

Will someone in the know please make FileZilla Cocoa compliant. The UI looks terrible (same as the old Windows versions). Two thumbs up for whoever was involved in updating the icons and overall look of the Windows version - it's great. I use Windows at work and Mac at home. The Mac version is ugly (sorry, it could be prettier)!

Overall, everyone who makes FileZilla possible is doing an excellent job. I wish I could code.

1. Download a file.
2. Right click on downloaded file and select edit.
3. Navigate to a different remote folder.
4. Edit and save the file.
5. Filezilla offers to upload the file. It goes to the new folder, without any way to change back to the original one.

Expected result: Upload the file to the folder it came from.

Workaround: 1. Select "No". Navigate to the correct folder and upload manually.

2. Remeber to navigate back before saving the file in your editor.
3. Edit/view the remote file instead of the local one. (But the connection may drop.)

When I try to open a file without accent, there is no problem. When a folder has an accent, it's possible to go as far as the file required, but then it becomes impossible to take it from the FTP to open it. When I use internet Explorer 8, there is no problem. But when I use Filezilla I get the message 550/data/Administration/information ÃlÃ"ves (this represents élèves in French)

I need a new username (or my old one) resent to me to me. My computer crashed and I lost lots of info. I run a business online and need to upload to my site today. Not sure what info you need from me, but my site is www.ReneeAddarioEvelyn.com and subsequently the ftp is ftp.reneeaddarioevelyn.com. My email can be either raddario@… or Renee@…. Please help!

TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING ..... please

It's been a long time coming.

It's a feature I know everyone wants.

It would be helpful if the up and down arrows on the site manager quick list could auto scroll when the mouse is over them rather than the current click to scroll down or up to the next item.

*I've attached two files to the ticket.

Problem: I have a problem with the site manager drop down. I have so many sites that the drop down extends beyond my screen's resolution, which is fine since I can then click and hold on a little gray arrow icon near the bottom of the list. However, the scrolling takes forever, and isn't really natural... If I want to scroll backup I have to move my mouse to the top of the list and click and hold on a different arrow icon.

Solution: Implement a vertical scroll bar in the site manager on the right hand side!

please see attachments for the original problem, and mock-up of the proposed solution

Dear Sir/Madam, I donwnloaded the free File Zilla from your website and also, for comparison, the shareware trial version of Smart FTP.

Whereas the process of uploading files and deletion of files is quicker in File Zilla, Editing of files is very cumbersome.

On the other hand, Editing facility in Smart FTP (e.g. automatic opening of .html files in Notepad and .css files in Microsoft Frontpage) is good. Best Wishes Prof (Wg Cdr) Gulshan Kumar Director, B-School

I use Windows XP. I am using verson 3.2.6.1 My files will not upload - they stop midway through and declare themselves "Failed files". I have been trying since yesterday - repeatedly. My host is ftp.forefactor.com I have deleted numerous files so that there will be room for the files to transfer. They are very large WAVE audio files (approx. 322,000,000) I have re-booted and re-started. The transfer seems to be very slow. There is a flashing red light at the bottom right hand corner of my screen (I thought this was supposed to be green).

When it fails it says the following: It disconnected from the server. Error: Disconnected from server: ECONNABORTED - Connection aborted

Previously, when it disconnected, the file continued to transfer. I do not understand why it completely disconnects now.

Please advise.

Hello There,

Using windows XP pro SP3 Filezilla version: 3.2.6.1

The server > force showing hidden files does not work properly for me (no files showing). I've tested using a linux version and everythings is fine there. Actually the windows version I have sends "226-Options: -l" to the server where it should send "226-Options: -a -l".

Thank you for looking into this.

The following error is shown when opening password protected XLS file is failed (wrong password or cancel button was pressed): "DDE execute request failed: a transaction failed."

Tested versions: 3.2.6.1, 3.2.4.1

Every time FileZilla checked for new updates it will show Version 3.2.6.1 is avaliable. If I try to download this file, there is an error message "Timer creation failed". Got the problem every time, not only at my own system, even at other PCs. I had to download latest version manually.

I would like Filezilla to remember a previously set file exists action.

For example, let's I have a queue with three files in the queue. One is set to over-write if the file exists, one to resume and another to rename. If I close Filezilla and then restart, the queue should remember the settings I picked for each file, rather than re-prompting for each one.

I'm guessing this would be a simple flag which could be saved in the queue.xml file.

There is an extended delay of around 1 to 2 minutes starting the client. Attaching a process monitor (logs attached) it can be seen that the process is trying to open the locale directory by traversing the hard drive. When the "locales" directory in c:\program files\filezilla is renamed to "locale" there is no delay.

FileZilla Client

Version: 3.2.6.1 Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2009-07-02 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.10 GnuTLS: 2.8.1

Greetings,

Excellent application, but it's really painful not to be able to right-click local files and open them in my favorite applications. The "Edit" command usually starts the wrong application. What is needed is "Open With..." dialog like in other Windows apps. Or at least "Explore this folder" to open the folder in Windows Explorer (so I can use it's context menu).

Here's how to display standard "Open With..." dialog for file named "filename" in Windows:

ShellExecute (0, "open", "rundll32.exe", "shell32.dll,OpenAs_RunDLL filename", NULL, SW_SHOW);

For more details about "Open with" dialog check out this article: ​http://support.microsoft.com/kb/192352

Thanks for your time and for making this fantastic application.

CroMan

This seems like the weirdest problem to have. I've been shown that its a simple drag n drop, but i can't drop my docs onto filezilla. This is keeping me from moving forward with my website. Is this a firewall issue? I have Mcaffe on my computer. Let me know if seeing the docs simplifies. Hope this is a simple solution. Thanks, Jill

I was wondering if there was a email notification for the FileZilla server. If not it would be helpful if there was one being put into a later version or update.

when I am uploading many files (about 50)

filezilla failes upload when tryes to connect more then two times to same server

server: Stav: Spojení navázáno, čekám na uvítací zprávu... Odpověď: 220 ftp server ready Příkaz: USER www.example.com Odpověď: 331 Password required for www.example.com. Příkaz: PASS Odpověď: 530 You can't be logged more than 2 times! Chyba: Nelze se spojit se serverem

filezilla write error bad password

that not true password is good (only 5 of 50 files failed) bud filezila ignore that server answers 530

It should be made possible to automatically open the Server Manager on startup of FileZilla - just one more option :-)

As I see, there is not chance to define which command is used for keeping the connection. I'm also using the "total commander" and it's FTP client functionality. There I can set the command to "NOOP", which does - as the command implies - nothing, but traffic. I think it's the best command for keeping the connection.

The new -l/--logontype prompt is really great, as it means that FileZilla can be used as the Windows FTP URI handler.

The cherry on top would be an "Anonymous" checkbox :)

See the log.

FileZilla will crash when a user creates a new file filter, is editing the rules, then switches (clicks) on another filter in the list box.

Just installed the latest version 3.2.7.1

"Site manager->advanced settings tab->remote directory input" does not support names with dots (.) anymore. It says "Remote Directory path cannot be parsed" This message is totally erroneous. It should let us enter whatever we want, and not perform validation. Furthermore, a lot of us can't tell what the underlying OS is...

For instance, I need to access the folder: ​ftp://server.com/example.com

I can't type "example.com" which is the subdirectory in which I need to go. Even when I select the "Unix" dropdown options.

Thanks for looking into this.

When entering the the Site Manager window using Danish localization, not all the panes are visible within the window. See attached screenshot.

Problem:

While trying to upload files I get the following error: Error: Failed to convert command to 8 bit charset

FileZilla then keeps trying to upload the file every 20 seconds, resulting in the same error over and over again, blocking the entire process queue.

Suggested Solution:

move transfer to failed transfers, and possibly build a feature that certain characters automatically get replaced (should be a user specified setting of course). Either way, please make sure these failed transfers don't stall a 4106 file upload at 0.1%

System info:

FileZilla version: 3.2.7.1 System (client) info: Windows Vista SP1, Pentium Dual Core T4200 (Dell Inspiron 1545) System (server) info: Linux based NAS (Synology DS107+)

Log 1:

Error: Connection timed out Status: Connecting to 192.168.1.101:21... Status: Connection established, waiting for welcome message... Response: 220 BarrieDisk FTP server ready. Command: USER admin Response: 331 Password required for admin. Command: PASS * Response: 230 User admin logged in. Status: Connected Status: Starting upload of C:\music_folder_path\Bad Religion - What Can You Do%.mp3 Command: CWD /music Response: 250 CWD command successful. Status: Retrieving directory listing... Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (192,168,1,101,217,11) Command: LIST Response: 150 Opening BINARY mode data connection for 'file list'. Response: 226 Transfer complete. Command: PASV Response: 227 Entering Passive Mode (192,168,1,101,217,42) Command: STOR Bad Religion - What Can You Do%.mp3 Error: Failed to convert command to 8 bit charset

Log 2:

Response: 227 Entering Passive Mode (192,168,1,101,217,87) Command: STOR Atmosphere - F!@k You Lucy.mp3 Error: Failed to convert command to 8 bit charset

Here's Ticket 849 that was closed and said to be fixed 2 years ago:

For example, my linux server uses UTF-8 as a default charset, and my WindowsXP laptop uses CP949 (EUC- KR) as a default charset. There should be some charset conversion for FileZilla client to get files with correct names, and FileZilla should be able to cope with conversion failure.

I had an occasion where the remote filename was .\www\automate\LISTE.csv, and it created a local folder ./www/automate/LISTE.csv to accomodate it...

I agree that Windows wouldn't like to welcome this file as is, with that filename that is, but putting it into another folder is worse. Maybe a middle solution could be negotiated? Like replacing unauthorised characters with '_' or ?

when i was uploading an large pack of files to byethost with my new bt home hub 2 and then it disconnect the internet...

i wonder if this software cause the problem or its my bt home hub?

Hi,

I use Resume action when file already exist. 2 times, on even file of 170 mo (movie), the number of octet downloaded is more larger than the initial size. The process not stop (10 or 20 mo more).

There is a specific site that I cannot retrieve the directory listing of, and as such am forced to use an alternate FTP Client (LeechFTP)

Filezilla is my favorite, and works in every instance besides this specific case.

The following is the trace information (URL,IP, and Username Removed):

Status: Resolving address of www.sitenamehere.com Status: Connecting to IPHERE:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220 Welcome to Brabys.com FTP Trace: CFtpControlSocket::SendNextCommand() Command: USER jolene Trace: CFtpControlSocket::OnReceive() Response: 331 Password required for usernameHere Trace: CFtpControlSocket::SendNextCommand() Command: PASS Trace: CFtpControlSocket::OnReceive() Response: 230 Logged on Trace: CFtpControlSocket::SendNextCommand() Command: SYST Trace: CFtpControlSocket::OnReceive() Response: 215 UNIX emulated by FileZilla Trace: CFtpControlSocket::SendNextCommand() Command: FEAT Trace: CFtpControlSocket::OnReceive() Response: 211-Features: Trace: CFtpControlSocket::OnReceive() Response: MDTM Response: REST STREAM Response: SIZE Trace: CFtpControlSocket::OnReceive() Response: MLST type*;size*;modify*; Response: MLSD Response: UTF8 Response: CLNT Response: MFMT Response: 211 End Status: Connected Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Retrieving directory listing... Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/" is current directory. Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: TYPE I Trace: CFtpControlSocket::OnReceive() Response: 200 Type set to I Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (196,34,149,71,207,158) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: MLSD Trace: CTransferSocket::OnConnect Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 425 Can't open data connection. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Error: Failed to retrieve directory listing

If any more details are required, they can be supplied.

Enjoy your day!

• Reelix

When I try to upload a file and they alredy exists I can see the options in both languages.

I consider this a bug, but you may consider it a 'feature request'. Here is the break down of what happens.

I have many many sites saved in the Site Manage, when I click the down arrow on the Site Manage icon, I have a list so long that I can't see any of the sites past 't' in the list.

There is an arrow on the top of the list, but not on on the bottom to scroll down the list.

For sites below 't' I have to go into the site manager and click connect.

Not a huge deal, but I would LOVE to see a version update that included this feature/bug fix. As it would make my life a tad bit easier.

FileZilla client shows empty dir listing in a non-empty directory on AIX. This happens approximately 9 times out of 10 if I repeatedly hit the refresh (F5). Sometimes it comes back with incomplete listing.

To me this sounds like a timing issue.

My local system is Windows XP. Remote host runs AIX.

uname -a

AIX ret4a046 3 5 00C1E7C04C00 unknown unknown AIX

Here is the help/about dump:

FileZilla Client

Version: 3.2.8.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2009-10-10 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.10 GnuTLS: 2.8.3

Here is the log, although it does not show any errors:

Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,47) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,48) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,49) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,50) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,51) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,52) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,54) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,55) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,56) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,57) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,58) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,59) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,60) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,61) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,62) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,63) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,65) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,66) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,67) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,68) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,69) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,70) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,71) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,72) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,73) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,74) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,75) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,76) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,77) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,78) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,80) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,81) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Trace: CFtpControlSocket::OnReceive() Response: 421 Timeout (900 seconds): closing control connection. Trace: Unexpected reply, no reply was pending. Trace: CRealControlSocket::OnClose(0) Error: Connection closed by server Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66)

After opening a new tab, trying to change the layout under Settings > Interface > Layout to Explorer, shows the Widescreen layout instead.

3.0.0-beta1

Suggest adding the following enhancements to navigation of tabs:

ctrl-tab should wrap around from the last tab to the first, vice versa for shift-ctrl-tab

ctrl-pgup/ctrl-pgdn should also switch tab, per Windows convetion

rolling the mousewheel over the tab bar should also switch tab -- not convention, but used in a few apps and very useful :)

whenever i am trying to connect to my server the following error message is appearing - critical error, could not connect to server

530 Server busy, erreur critique what is hapend please?

These two toggles (Remote and Local Directory Tree Toggle) are located in the top bar under the Main Menu Bar. They both have a weird behavior. Both were OFF upon start.

The weird behavior appears as soon as the tabbed interface is activated or a little later on while using it.

This behavior is characterized by:

• Clicking the button indents it (visual active state) but the panels for remote directory/local directory tree do not appear.
• The buttons do not respond to any further requests once in this state.

I am using the latest version of filezilla (updated 10 min ago.)

I have restarted filezilla and the buttons work again until I create a new tab. Unless now only the "remote directory tree" is affected by the bug. The local directory switch works properly. Then I create a new tab once again and both toggles work properly again. Then again I leave one tab open (the tab-panel disappears) and create a new tab - the problems appear again.

Truly a strange thing.

Here is the About Filezilla Information:

FileZilla Client

Version: 3.3.0

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2009-11-09 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.10 GnuTLS: 2.8.3

Download set to auto resume, queue the file twice, then start download. it will download in 2 different thread, to the same location, same local file(auto rename disabled). the result file is corrupt. Using FIlezilla 3.3.0.1

Hi,

Since the 3 last versions (3.3.0.1, 3.3.0 and 3.2.8.1), from time time, when I download from my server (Ubuntu Desktop 8.04) a list of files, the download stops without any error message and without reason. I just do a right click, then uncheck 'Traiter la file d'attente' and then recheck and the download restart until it stops again at a later time, on the same file or not. I was unable to focus a type of file, a file size or something.

I never have this problem with the 3.2.8 and previous versions.

FileZilla Client

Version: 3.3.0.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2009-11-15 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.10 GnuTLS: 2.8.3

Every time I download a file, it gets to 100% and then stays there. I have used checksums to verify that the download has completed and then remove the download but when I add a new one it says: "ftpcontrolsocket.cpp(1819): Waiting for replies to skip before sending next command... caller=0p2e53e08" this happens in version 3.3.0.1 on Windows and Linux ( the caller is different under linux)

Hello I am running windows 7 and was using version 3.2.8.1 which was working OK, then I upgraded to 3.3.0.1 and it ran after the upgrade. But after closing the program, I always get the message missing mingvw10.dll and please reinstall the program. The mingvm10.dll is in the FileZilla folder. I have tried to reinstall the old version and now I have the same problem. I have to reinstall the program to get it to work one time.

Any Ideas?

Thanks

Ray

Error: Critical error Error: Could not connect to server

This happens while the logon process to several servers since the update to 3.3.0.1

FileZilla Client

Version: 3.3.0.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2009-11-15 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.10 GnuTLS: 2.8.3

I decided uninstall filezilla. It seems to be irresponsible software. While cute ftp insists untill the file is totally uploaded, Filezilla when encounters some difficulty in the connection, simply abandones files with ZERO length in the server side because it tryied to create new file but had problems in the connection.

I can not continue using a software that leaves zero length files in the server side when something happens to the connection. I use Cute ftp because it is more eficient.

When in synchronized browsing mode, folders will change automatically locally and remotely, but I would make sense for the scrollbar to be synchronized also.

i wish to connect to my host trough a computer in my college which is powered by server. i tried to connect through normally it failed with error messsage 'NOEIONAME', it may spelled wrong but some thing like that .is there is any other way to conect to my host through my college systems b'coz they r using high speed broadband help fixing this bug.

hi, when i type filezilla in terminal it opens unstable and terminates with "Segmentation fault" stderr; i know i could chroot and set W/D to /user/lib/filezilla3 ( though never tried that )

just an unexpected behavior, not a bug

Pressing TAB cycles the keyboard focus between the UI elements of the screen, including the Quickconnect toolbar, Local site and Remote site paths, directory trees, and file lists.

Pressing CTRL+TAB should change tabs, but instead it functions the same as TAB, until/unless the focus is currently on the Local site or Remote site path fields, at which point it functions normally until focus changes.

Currently the Transfer Queue only has three tabs: Queued files, Failed transfers and Successful transfers.

However, when doing a sync, files get listed in successful transfers list regardless of the action (skipped or transferred).

It would be nice to be able to see those counts. Maybe a new coulmn in the Successful transfers tab called "Action" where you could see (and sort using that column) if and which files have been transferred and which have been skyped. It could possibly list the reason why it was detected as different (diff file size, source file newer etc.)

The previous version worked fine. I should have kept it. When I install version 3.3.1 it works fine - once. The next time I try to use it, I get the error, "The application has failed to start because mingwm10.dll was not found. Re-installing the application may fix this problem."

I re-install 3.3.1 and it works - once. Then I have to go through this process again. Why is this happening?

I use Windows XP Media Center Edition 2005 with all updates applied except Service Pack 3.

Bob Pegram San Jose, CA

Add a site via Site Manager and the password is stored in the sitemanager.xml file in plain text:

<Server>

<Host>testhost</Host> <Port>21</Port> <Protocol>0</Protocol> <Type>0</Type> <User>testuser</User> <Pass>testpwd</Pass> <Logontype>1</Logontype> <TimezoneOffset>0</TimezoneOffset> <PasvMode>MODE_DEFAULT</PasvMode> <MaximumMultipleConnections>0</MaximumMultipleConnections> <EncodingType>Auto</EncodingType> <BypassProxy>0</BypassProxy> <Name>test_security</Name> <Comments /> <LocalDir /> <RemoteDir /> <SyncBrowsing>0</SyncBrowsing> test_security </Server>

Build information: Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2010-01-03 Compiled with: i586-mingw32msvc-gcc(GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against: wxWidgets: 2.8.10 GnuTLS: 2.8.3

When selecting multiple files or folders using Ctrl+Shift in the local or server file browser, the number of Selected files/folders is shown wrong. It seems that the real number of selected files is just added to the previously displayed number of selected files.

Example: Selected 3 files e.g. using Shift (FZ displays "Selected 3 files."). If you go on selecting 2 more files with Ctrl+Shift there are 5 files selected but FZ shows "Selected 8 files." (5 real + 3 form before). Go on selecting 2 more files, FZ shows "Selected 15 files." (7 real + 8 thought from before). And so on..

Version: 3.3.1

(Screenshot attached)

while dragging files to move them to another folder, if the target folder is above on the list (for instance "..") the panel listing the does not scroll to the top even if you drag near the top (or bottom) of the panel

On a side note: Love your work and been with you for years and will be a whole lot more. Keep up the excellent work

After downloading and starting the new setup for version 3.3.1, I got a dialog window with inconsistent dutch language. (I guess the version number is irrelevant here.)

Controleren op updates

​http://downloads.sourceforge.net/filezilla/FileZilla_3.3.1_win32-setup.exe downloaden

Bestandsoverdracht succesvol

De nieuwste versie is gedownload. Klik op 'Voltooien' om FileZilla af te sluiten en de installatie te starten.

[ < Vorige ] [ Afronden ] [ Annuleren ]

It says "Click on button 'Voltooien'" and then shows the (corresponding) button 'Afronden'. See attached file

This is what I'm getting. I have updated my router and uninstalled my Norton 360. Please help.

Connecting to probe.filezilla-project.org Response: 220 FZ router and firewall tester ready USER FileZilla Response: 331 Give any password. PASS 3.3.1 Response: 230 logged on. Checking for correct external IP address Retrieving external IP address from ​http://ip.filezilla-project.org/ip.php Checking for correct external IP address IP 67.186.178.115 gh-big-bhi-bbf Response: 200 OK PREP 49240 Response: 200 Using port 49240, data token 1037870087 PORT 67,186,178,115,192,88 Response: 200 PORT command successful LIST Response: 150 opening data connection Response: 503 Failure of data connection. Server sent unexpected reply. Connection closed

our site: wolfmountain.com

207.178.133.10

I cannot see the password and need to change it, please advise how to do this?

Thanks.

In Windows-Umgebung entstehen immer wieder Dateinamen mit Umlauten. Beispiel: Mail-Folder-Name = Lämmli.dbx (aus Outlook-Express).

Die Datei Lämmli.dbx wird dann nicht übertragen, eben wegen des Umlautes.

Laemmli.dbx würde funktionieren.

Könnte man von FZ aus "falsche Dateinamen" automatisch in "richtige Dateinamen" übersetzen, also Lämmli.dbx wird -> Laemmli.dbx. Diese wird nämlich ohne Fehler übertragen.

Bravo: Die fehlerhafte Übertragung wird in FZ bereits gemeldet, aber das übersieht man leider.

Ernst

Hi, I am using FileZilla on Windows 7, I was transfering many files to my FTP Server. Mostly small files, but few big ones. After all small files are transfered one of the Big files left. The Speedmeter isn't korrekt from that moment. Its as small as while the Uploadbandwith ist divided by multiple transfers, but now there is only one. In my taskmanager i can see that the full bandwith is used, but not showed in the Speedmeter in the Filezilla transferlist. It's growing but slow! I think you have to improve the calculation of the actual Speed, if there are big differences in short time.

I've put up a .desktop file with the translations available at: ​http://mdk.jack.kiev.ua/trunk/l10n/$lang/messages/menu-messages-main/menu-messages-main.po

Hello,

It's impossible to list directory : Commande : CWD /AAAA - AAAA (AAAAA) [March 18, 2010] AAA Réponse : 250 CWD command successful Commande : PWD Réponse : 257 "/AAAA - AAAA (AAAAA) [March 18, 2010] AAA" is the current directory Commande : PASV Réponse : 227 Entering Passive Mode (xxx.xxx.xxx.xxx). Commande : MLSD Réponse : 550 Unable to handle command Erreur : Échec lors de la récupération du contenu du dossier

Client OS : Win XP Protocol : FTP

I have a valid ssl certification on my server. I connect filezilla cliet TLS and i have to accept this cert. WHY? My browser accept automatic this cert. I need to the client use microsoft cert store. How to it?

I am running FileZilla 3.3.2.1. I have the default pane layout with "Remote site" on the right hand side. When not connected to a remote site, either after startup or after disconnecting, the status bar (is that the correct word?) under Remote site displays "Empty directory." This text implies that a certain directory is targeted but that it does not contain any file to display. In my view that is incorrect, because there is no directory that this refers to. It would be better if the text read "Nothing to display" or "No files to display".

Windows 7 x64 FileZilla Client 3.3.2.1 (updated from previous version automatically)

After transfering text files (in Mac encoding - CR at line end) CR are removed from file at all. Tried some other ftp-clients - everything's ok.