Custom Query (10426 matches)

i have uploaded new version now i do not have delete right even if it marked in the settings

re-registered because it would not accept my username

I would like to cancel filezilla altogether

What is the process?

The logs say its still downloading from the Seedbox server and in the Download Quence, the Downloads are still their but they stop and have the "?" next to the speed or next to the amount the file should be downloading at, Plus the traffic lights at the bottom right hand side of the application, turns off. The Only way to unfreeze or turn the lights back on or resume the downloads, is by unchecking the "Process Quence" and clicking on it again. Please help.

I just updated to Version 3.22 and tried to connect to one of my servers via sftp. but the connection couldn't be established. I can't connect to any of my servers.

After downgrade to 3.21 everything worked fine. So it's definitely a bug in new version 3.22.

One of my users upgraded FileZilla on her Windows PC to version 3.22.0.

When she tries to connect to an AIX server she gets the following message:

Status: Waiting to retry... Status: Resolving address of hostname Status: Connecting to IP_address:21... Status: Connection established, waiting for welcome message... Response: 220 damgapp1 FTP server (Version 4.2 Mon Dec 3 10:30:51 CST 2012) ready. Command: AUTH TLS Response: 234 Using authentication type TLSv1 Status: Initializing TLS... Error: GnuTLS error -15: An unexpected TLS packet was received. Error: Could not connect to server

Note: hostname and IP_address removed for security reasons

On my Windows PC, I'm running FileZilla 3.7.1.1 and have no problems connecting to the AIX server.

What changed between FileZilla 3.7.1.1 and 3.22.0. ?

I am getting the attached message every time that I logon to my webpage. It still gains access to the folders, but every time I click on one, the same message appears.

Hi,

I detect a problem with my macintosh, why your software posses a Spybot virus ?... after download software in your webside, the "FileZilla_3.22.1_macosx-x86_setup_bundled.zip" my Intego antivirus find a Spybot virus... Why insert this virus in your software, after 10 years of use? x.x Is not cool x.x

Regards, Boris

When, I transfer o edit a file, I have a fatal error, the mac have a reboot.

*** Panic Report ***
panic(cpu 2 caller 0xffffff8019942f98): "a freed zone element has been modified in zone kalloc.128: expected 0x3f0011e6d11bc3d2 but found 0, bits changed 0x3f0011e6d11bc3d2, at offset 0 of 128 in element 0xffffff8033d44580, cookies 0x3f0011e6d11bc3d2 0x53521e61aaece2f"@/Library/Caches/com.apple.xbs/Sources/xnu/xnu-3789.1.32/osfmk/kern/zalloc.c:651
Backtrace (CPU 2), Frame : Return Address
0xffffff914c37baa0 : 0xffffff80198f748c 
0xffffff914c37bb20 : 0xffffff8019942f98 
0xffffff914c37bb90 : 0xffffff80199421e9 
0xffffff914c37bbe0 : 0xffffff8019940c24 
0xffffff914c37bd30 : 0xffffff8019e3c057 
0xffffff914c37bd60 : 0xffffff8019ea340e 
0xffffff914c37bd70 : 0xffffff8019ea7f78 
0xffffff914c37bda0 : 0xffffff8019eadbcc 
0xffffff914c37bdf0 : 0xffffff8019ea635e 
0xffffff914c37be40 : 0xffffff8019ea3b62 
0xffffff914c37be80 : 0xffffff8019eaf8b8 
0xffffff914c37beb0 : 0xffffff8019ea5a7d 
0xffffff914c37bef0 : 0xffffff8019ea3590 
0xffffff914c37bf30 : 0xffffff8019ebd621 
0xffffff914c37bf80 : 0xffffff8019ebcd7c 
0xffffff914c37bfb0 : 0xffffff80198a6af7 

More info about my hardware:

Kernel version:

Darwin Kernel Version 16.0.0: Mon Aug 29 17:56:20 PDT 2016; root:xnu-3789.1.32~3/RELEASE_X86_64
Kernel UUID: 622D2470-C34D-31F9-A62B-6AA9A3C6A3CD
Kernel slide:     0x0000000019600000
Kernel text base: 0xffffff8019800000
__HIB  text base: 0xffffff8019700000

Hello,

I've been using FileZilla for more then 3 years. However, now I can't use my log in credentials any more. Not sure what happened.

I always log in by copying and pasting all information. It's stopped working on my Mac. I've been using Mac for 5 years.

37.157.195.133 adamwojnarhurado12

How can I log in please? How can I change password? Thank you Adam

Hi.

Today I updated FileZilla to the latest offered version 3.22.2. After that it will not launch.

Description:

1. See system and crash log in attached file
2. Working user account is non admin

3. After launching the previously installed FileZilla-Version it automatically offered an update to the named version. I chose to update.

4. After this update procedure FileZilla would not launch.

5. Checking all Gatekeeper and SIP-settings - even if disabling - the app would not launch.

6. Redownloading the bundle-installer, installing. But here also app will not launch.

7. Redownloading non installer, but the file FileZilla_3.22.2_macosx-x86.app.tar.bz2. Moving the unpacked app to "Programs". Still app will not launch.

8. Repaired permissions through terminal. Restarted system. FileZille will not launch.

9. Started app from download-location. This time app launches with OS-warning. On choosing open anyway FileZilla will not appear with main window.

10. Logged out and logged in with admin account.

11. On launching FileZilla the OS prompted a warning that there was a problem launching FileZilla. The crash-log is attached to this report.

I never had such a behaviour with any FileZilla-iteration before. I always downloaded the new compressed app-file, unpacked, moved to programs and launched it without error.

Thank you for listening.

Hi, My FileZilla stopped working halfway through a download, and won't restart. I get the following Status: Resolving address of nl3851.dediseedbox.com Status: Connecting to 46.166.187.194:21... Status: Connection established, waiting for welcome message... Error: Could not connect to server What could be going wrong. This is the first time it has happened. There is nothing wrong with the Internet at present. Regards Quenten Walker

This is a bug with Windows, but I believe FileZilla can do something about it as well. Duplicate of #10968 but it's rejected and I wanted to provide more information on how to trigger this.

1) Perform a transfer and get a notification about its completion 2) Perform a second transfer that completes while the notification is still up 3) Taskbar and other Explorer elements (win+e, win+d, win+r, win) are now frozen for what seems to be 90 seconds (however, alt+tab works). One cannot work on the computer anymore for as long it is frozen.

If you do a transfer while the notification is up that doesn't complete until the notification is gone, everything works as intended.

The only way to prevent this is to turn off notifications for FileZilla completely.

Hi,

Since i upgrade FileZilla > 3.20.0, i'm unable to use SFTP protocol to connect Linux host (last test failed with 3.22.2): message "Unable to connect host" I downgrade my version to 3.20.0 and it's work well.

Christophe

It happened in both 3.22.2.1 and 3.22.2.2. I almost will use FileZilla client to do the photo-downloading job every day from my smartphone in which a FTP server app will run. After downloading finished, I then will delete all the source pictures in server. While the deleting-job is running, if the server app works fine, everything will be OK; if the server app is unexpectedly shut down due to the phone's power-saving mode or my quiting touch, the FileZilla client will give a error message in message log area such as "connection failed". In such condition, One or several downloaded and locally stored files will be modified: the sizes turn into 0, which means the file bodies are lost and only names are kept. And after the server app is re-run and connetion is re-built, the names of those 0-size files will show again in the transfer queue area, not the queued-files page, but the failed-transfers page, it seems the client wants to download those pictures again from server, but failed because they also have been deleted from server already. Then I have to face the situation: I lose these pictures forever because the source in server has be earsed and the local copies have been modified into 0-size.

FileZilla Client

Version: 3.22.2.2

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2016-11-01 Compiled with: x86_64-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -std=gnu++14

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.4.16 SQLite: 3.15.0

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi2 bmi2 Settings dir: C:\Users\Devcon Wang\AppData\Roaming\FileZilla\

Hi

I have lost my username and password

My email address is mike.collins@…

is it possible to reset?

Add a feature to delete specific entries into the quick-connect bar. This *should* (probably not) be a simple patch to increase usability.

Hi,

everytime I try to upload anything to my server, my explorer.exe hangs. There's no Windows event log or an error message. So, after uploading, I have to stop the explorer.exe task and restart it. Is there a solution to fix it?

Thanks in advance!

I have been unable to login to the FTP

Status: Resolving address of ftp.encoreindia.com Status: Connecting to 97.74.158.1:21... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of ftp.encoreindia.com Status: Connecting to 97.74.158.1:21... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server Status: Disconnected from server Status: Resolving address of ftp.encoreindia.com Status: Connecting to 97.74.158.1:21... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of ftp.encoreindia.com Status: Connecting to 97.74.158.1:21... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server Status: Disconnected from server Status: Resolving address of ftp.encoreindia.com Status: Connecting to 97.74.158.1:21... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of ftp.encoreindia.com Status: Connecting to 97.74.158.1:21... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server

3.23.0 was working fine with sftp logon with key to the same server. now 3.23.0.1 fails, making it unusable.

Status: Connecting to dipconsultants.com... Response: fzSftp started, protocol_version=7 Command: open "markybob@…" 22 Error: Disconnected: No supported authentication methods available (server sent: publickey,keyboard-interactive) Error: Could not connect to server Status: Disconnected from server Status: Delaying connection for 5 seconds due to previously failed connection attempt... Status: Connecting to dipconsultants.com... Response: fzSftp started, protocol_version=7 Command: open "markybob@…" 22 Error: Disconnected: No supported authentication methods available (server sent: publickey,keyboard-interactive) Error: Could not connect to server Status: Disconnected from server Status: Delaying connection for 5 seconds due to previously failed connection attempt... Status: Connecting to dipconsultants.com... Response: fzSftp started, protocol_version=7 Command: open "markybob@…" 22 Error: Disconnected: No supported authentication methods available (server sent: publickey,keyboard-interactive) Error: Could not connect to server Status: Disconnected from server

The timestamp bug is still when you trie to move files from last version of Filezilla (as FTP client) to a SFTP server (in this case Tectia).

Windows 7 64 bits

Could you provide to me further details to solve this issue?

Thanks

I have set transfer priorities for files in query, but they weren't applied and the files were uploaded as in order of places on the list

Estou tentando me conectar com o Host e não estou conseguindo 07:09:50 Erro: Conexão expirou após 20 segundos de inatividade 07:09:50 Erro: Não foi possível conectar ao servidor 07:09:50 Erro: Conexão expirou após 20 segundos de inatividade 07:09:50 Erro: Não foi possível conectar ao servidor

Using Filezilla Mac 3.23.0.2 or the previous two versions.

When a file change dialog appears while the context menu is expanded the UI ceases to function until the application is left in the background for some time, or the application is forced to quit. Clicking any of the button options available on screen does nothing.

When I have a filename that has diacritics separated in the HFS+ manner (e.g. ä becomes a¨) I am able to upload complete folders of files to a remote system (Linux www 4.4.0-36-generic #55-Ubuntu SMP Thu Aug 11 18:01:55 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux) via sftp so that in the process the files end up as diacritics combined to the remote system filesystem (/dev/vda1 on / type ext4 (rw,noatime,errors=remount-ro,data=ordered)).

Now, if I wish to enter into that folder, and having updated locally some files, I want to just attempt an upload on all files and select "overwrite if newer than target", It just happens that FileZilla correctly compares the filenames when determining whether it should ask me about what to do with the files with (virtually) identical filenames (a¨ on local HFS+ == ä on remote ext4). But, after that, it copies the files with diacritics uncombined this time, leaving duplicates with virtually identical filenames.

I digged a little further: if I then try to copy the file with combined diacritical marks (copying filenames to textwrangler document verified which one was which) from the remote side to local, filezilla shows two files on local directory like on remote side, but when you remove either of them, both get deleted (meaning maybe that there was only one file after all or then deleting local files function behaves inconsistently?). I really need this one fixed, please.

550 Le temps d une paix, Coffret 1 - DVD 1 - 480p DVDRip x264 - {Houston035} : Directory not empty , je suis incapable de supprimer

Svp j'ai besoin d'aide

Je vous remercie

up until the most recent update I have not had a problem using FileZilla. After this update it wont allow me to connect to the server. It keeps saying

Status: Connecting to 199.60.101.234:8821... Status: Connection attempt failed with "ECONNREFUSED - Connection refused by server". Error: Could not connect to server Status: Waiting to retry... Status: Connecting to 199.60.101.234:8821... Status: Connection attempt failed with "ECONNREFUSED - Connection refused by server". Error: Could not connect to server Status: Disconnected from server Status: Connecting to 199.60.101.234:8821... Status: Connection attempt failed with "ECONNREFUSED - Connection refused by server". Error: Could not connect to server Status: Waiting to retry... Status: Connecting to 199.60.101.234:8821... Status: Connection attempt failed with "ECONNREFUSED - Connection refused by server". Error: Could not connect to server Status: Disconnected from server Status: Connecting to 199.60.101.234:8821... Status: Connection attempt failed with "ECONNREFUSED - Connection refused by server". Error: Could not connect to server Status: Waiting to retry... Status: Connecting to 199.60.101.234:8821... Status: Connection attempt failed with "ECONNREFUSED - Connection refused by server". Error: Could not connect to server Status: Disconnected from server Status: Connecting to 199.60.101.234:8821... Status: Connection attempt failed with "ECONNREFUSED - Connection refused by server". Error: Could not connect to server Status: Waiting to retry... Status: Connecting to 199.60.101.234:8821... Status: Connection attempt failed with "ECONNREFUSED - Connection refused by server". Error: Could not connect to server

so I have looked at everything I can think of and find to try to fix the issue but to no resolve. the network wizard says this when I run it

Connecting to probe.filezilla-project.org Connection established, waiting for welcome message. Response: 220 FZ router and firewall tester ready USER FileZilla Response: 331 Give any password. PASS 3.23.0.2 Response: 230 logged on. Checking for correct external IP address Retrieving external IP address from ​http://ip.filezilla-project.org/ip.php Checking for correct external IP address IP 97.34.64.20 jh-de-ge-ca Response: 200 OK Failed to create listen socket, aborting Connection closed

this is really starting to bug me because of the work I have to get done and it wont let me connect. other people can connect to the server just fine with same version so I don't know what the issue is it happened over night one day I could connect the next I couldn't and I'm using all the recommended settings for ftp connection. please help end my misery

Every year, I upload a schedule.htm to my web site via filezilla. This year, when I opened filezilla, it had a latest version update (which I always do when given the option), and I then deleted old schedule, updated new schedule and I get the following: "404 not found, nginx/1.2.7". I have searched filezilla forums several ways and each time I get 0 results. I have contacted my server, deleted old htm files and re-uploaded. I have uninstalled and reinstalled filezilla, and no matter what I have tried, I continue to get this message and thus, cannot view my schedule. This affects my business, and as it is the start of a new year, this for me is a high priority.

Currently when Filezilla Server is configured to run with TLS 1.2 only there are 2 ciphers that are enabled that cause Filezilla Server to fail a PCI 3.2 audit/scan. These two ciphers in question are:

| TLS_RSA_WITH_IDEA_CBC_SHA | TLS_RSA_WITH_SEED_CBC_SHA

This topic has already been discuss here: ​https://forum.filezilla-project.org/viewtopic.php?t=41686

A clone of this project already has this solution implemented on github as a reference: ​https://github.com/wolfbeast/filezilla-server/commit/5f7b6ac747a56d5c8053dee40bdacf4bb4310c3a

It looks like a simple change to CAsyncSslSocketLayer::InitSSLConnection function in AsyncSslSocketLayer.cpp will resolve this issue:

// Disable (3)DES, RC4 and other weak and export ciphers
// Also disable rarely used SEED and IDEA
// We do not make use of PSK and SRP so disable them as well for good measure.
pSSL_set_cipher_list(m_ssl,"DEFAULT:!eNULL:!aNULL:!DES:!3DES:!WEAK:!EXP:!LOW:!MD5:!RC4:!SEED:!IDEA:!PSK:!SRP");

This is not my github account, only a solution I found online. Any credit should reference ​wolfbeast

Hello after upgrading to 3.24.0 I am unable to connect to a site with an untrusted certificate. Similar tickets 11129 11131 and 11152 were closed REJECTED.

These bugs were REJECTED on the basis that a valid server certificate was required BUT IN PREVIOUS RELEASES CONNECTION WAS ALLOWED AFTER A DIALOG WAS SHOWN.

I would like the dialog RESTORED so that I can approve a connection to a shared server -- or a link to a previous release so I can access my business-related server. Thank you for your quick work on this.

Thanks.

I have a client with over 120,000 jpeg files that I backup to a local drive. It seems to take to long for FileZilla to determine if a file exists or not. I can do a CURL search of both directories and then a compare in lest than 8 seconds. If I just let Filezilla determine if a file already exists it takes over two hours to complete. Is there a better way to go? For some reason the dates displayed are not always accurate if a file has been replaced on the server.

David

Anytime I use FileZilla for moving a decent amount of files or largely sized files it just Times Out and won't get another good connection. This has been happening for the past 6 months, I should've reported sooner but I kept thinking it was fixed everytime I saw a fresh update. It's happened over various OS X versions as they keep making newer ones. It seems touchy and I haven't quite figured out how to fix this in a bypass sort of way.

So let's say I want to download a 1GB file from one of my servers, it is working just fine and then when it may get to, let's say, 40% it just pauses. Then it says Timed Out, continues to attempt reconnecting but fails. Some ways I've bypassed it have been: -Waiting 10 minutes to almost a week -Unprocessing the Queue and waiting, then Process it again -Disconnect, and waiting, then Reconnect -Restarting FileZilla Restarting my computer doesn't seem to fix it, as well as re-installing FileZilla, and I've also triedwiping the server data. This has happened on at least 4 seperate servers for me. And not all of the above work, like previously stated it's a weird bug and seems touchy. Some require multiple of the above to happen, sometimes it just takes a whole lot of time.

The servers run on professional hosts and have not reported any issues or downtimes and did not see why it was happening to me. I have spoken to other users on Windows and they haven't had issues using my servers.

Hi I've just installed FileZilla and I have no clue what so ever what the host name is supposed to be. I search your forum, your user guide, I did as well research on the internet and unfortunately nothing helped me. I thought it was the name of the ftp site where the audio files are but doesn't seem to be that... would you be so kind to explain me in details how to connect?

Thanks! Elie

Hello,

I notice a very annoying problem when im working on my websites i always go to folders and files but for no reason after a time i cannot select anything i need to refresh many time go outside folders or disconnect ftp to be able to select folders or files i don't understand why this happen in past i don't have this problem i run on mac and Filezilla version is 3.24.1

Thanks for your help

From the last update on I face an issue :

Filezilla disapeared from menu & dock I checked in pamac : it is installed

If I launch it via CLI it is functional.

It appears that strange hidden characters are at the very beginning of the desktop file.

Solution : edit /usr/share/applications/filezilla.desktop, remove the first [ of [Desktop Entry] and any character on the left, then rewrite the [ , and save.

Could the desktop file be amended ?

Manjaro Unstable Kernel 4.10.1-1MANJARO x86_64 Filezilla 3.24.1 wxWidgets 3.0.2 GnuTLS 3.5.9 SQLite 3.17.0

Since upgrading to 3.24.1

Every time I complete a transfer filezilla crashes!!!!

unusable. Wish I had an old version to roll back too!

I get this message when loading the 32 or 64 bit version and the program doesn't seem to be working correctly. I have it loaded on a different machine and it works fine but, this machine with windows 10 doesn't seem to let it load correctly. This is the error message:

" The file 'c:\users\Theresa|AppData\Roaming\FileZilla\filezilla.xml' could not be loaded. No document element found at offset 8376 For this session the default settings will be used. Any changes to the settings will not be saved."'

Even after updating to 3.25.1 unable to connect to old servers

I tired to suppress the check for update from filezilla 3.25.0 application by Edit->Setting->update and i choose never. but still i am getting that new version available in the menu and getting prompt when i open the application.

Request your support to suppress the prompt and automatic updates in this application.

FTP Proxy settings not work in 3.25.1 and 3.25.0. In 3.22.2.1 work fine.

I use switch USER@HOST

If i move my main client screen from the main monitor desktop to the secondary any dialog generated is not visible until I drag the client window. At this point it can be seen located on the main monitor desktop, partially transparent and locked to the movement of the client window.

If I drag the client window far enough in the opposite direction from the main monitor desktop I can grab the dialog and place it on secondary. Whilst the dialog is sitting on the secondary it remains locked to the movement of the client. If i then drag the dialog to the main monitor's desktop, the lock is broken and remains that way subsequently when moved back to the secondary.

After closing the dialog or client having adjusted the position of the dialog to be visible, the state is not retained.

I have not experienced this bug in any recent previous version of the client and it applies as far as I can ascertain to all dialogs, about, settings, connection manager, file overwrite etc.

FileZilla Client

Version: 3.25.1

Build information:

Compiled for: x86_64-apple-darwin16.4.0 Compiled on: x86_64-apple-darwin16.4.0 Build date: 2017-03-20 Compiled with: Apple LLVM version 8.0.0 (clang-800.0.38) Compiler flags: -Werror=partial-availability -Wall -g -std=gnu++14

Linked against:

wxWidgets: 3.0.3 SQLite: 3.16.2 GnuTLS: 3.4.16

Operating system:

Name: Mac OS X (Darwin 16.5.0 x86_64) Version: 10.12

Earlier this week, searching in our FTP folders using the remote search option has stopped returning results when the criteria is file name "contains"

This is happening for our users on Windows as well as for the two of us that use Macs. We've confirmed we have the most recent version 3.25.1 installed

An example search for contains "990_A" is shown here ​https://monosnap.com/file/xzXDYRhRiiQ1D0bnepA65krIukASw1 and I moved the search box to prove that there is a file with that information. I also tried this search with "starts with" and didn't get results, as soon as I changed to "does not contain" then results for files without that are returned...but I really need to find files with specific values in their name

Hi FileZilla Team,

Had searched the feature request tickets and didn't find any results...

Just wanted to ask if there could be an option (in the local file list) that when you right-click on a file or folder, there's an option for "Locate file in Finder" (MAC) or "Locate file in Explorer" (Windows)? This feature would serve very handy when wanting to reorganize the local folder or open an image in Photoshop, or extract a zipped folder to verify the contents, etc.

Thanks in advance if this can be implemented soon!

Best Regards, Jaime

Bonjour Ayant un site en construction sur OVH.com, il me fallait utiliser filezilla. Sans problème au départ, il s'avère que maintenant je ne parviens plus à me connecter au serveur, car je dois avoir un problème de mot de passe. Que puis je faire? Merci Cordialement

FileZilla Server 中文版 version 0.9.46 beta Copyright 2001-2014 by Tim Kosse (tim.kosse@…) https://filezilla-project.org/ Connecting to server... Error, could not connect to server Trying to reconnect in 5 seconds Reconnecting to server... Trying to reconnect in 5 seconds Error: Connection to server lost...

没有配置，刚打开就这样 服务器地址填的是127.0.0.1，端口4567

Hi,

I've been having problems with Filezilla. Every time I try and to connect it's coming up with errors. But now, I can't even connect at all - it doesn't load.

Is anyone able to help with this please?

Thank you.

Hello

I fully reinstalled my Mac OS, and after that - on clear OS X I have a bug: ​https://www.dropbox.com/s/2iauavn25tlmz5i/Screenshot%202017-05-15%2017.00.07.png?dl=0

I am not able to log into a specific site using the latest version of FileZilla.

I have not yet been able to successfully log in to this particular site (216.55.183.227). However, I have been able to do so using other FTP clients such as FTP Voyager using the same configurations (site IP address, port #, password, remote directory, transfer mode, etc.).

The following is typical of what is logged by FZ:

Status: Connecting to 216.55.183.227:21... Status: Connection established, waiting for welcome message... Status: Logged in Status: Retrieving directory listing of "/FC35"... Command: CWD /FC35 Response: 250 CWD command successful Command: PWD Response: 257 "/FC35" is the current directory Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (216,55,183,227,190,31). Command: MLSD Error: The data connection could not be established: ETIMEDOUT - Connection attempt timed out Error: Connection timed out after 61 seconds of inactivity Error: Failed to retrieve directory listing Status: Disconnected from server Status: Connecting to 216.55.183.227:21... Status: Connection established, waiting for welcome message... Status: Logged in Status: Retrieving directory listing of "/FC35"... Command: CWD /FC35 Response: 250 CWD command successful Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (216,55,183,227,157,158). Command: MLSD Error: The data connection could not be established: ETIMEDOUT - Connection attempt timed out Error: Connection timed out after 61 seconds of inactivity Error: Failed to retrieve directory listing

Description:Found DLL injection in the FileZilla Client Version 3.25.2, successfully injected dllinject.dll into the filezilla process address space. On successful execution of the attack, temp file is created into E drive as I have written the same logic in the dllinject.dll.

Impact: On successful execution of DLL injection attack, an attacker can create windows user or other malicious activity as I have performed the text file creation.

Remediation: You can prevent this attack by hooking LoadLibrary. In your hook you check against a list of DLL names that you know are part of the process and that may be loaded, or you can check against a list of known DLLs you don't want to load. When you find a DLL you don't want to load SetLastError(ERROR_ACCESS_DENIED) then return NULL. That will stop the DLL from loading.

Hi.

I've been having issues with all my pages I create rendering me a 404 not found error which I heavily researched for days...and I'm still having issues with these pages not showing up online.

Since I know I should have this solved like days ago, I'm shocked and have checked everything except a Filezilla issue.

I have version 3.9.0.6 because I like the way it's set up.

So...can you please tell me if that version is still working and still able to use? That's 'all' I need to know. Because if it's still working, I can move on to other troubleshooting.

Can you please let me know, I would greatly appreciate it.?

Thank you, Rob Gutierrez 32s2000@…

Hello, I need these features to be added in filezilla.. plz have a look:

1. option to remember yes/no option in "File has change" dialogue and we can revert this option from settings too...

2. if I choosen as Yes from "File has change" and also ticked "Remember option", then whenever a file being edited and saved, it'll be automatically uploaded like it do when we click yes...

3. option to change default option on double click/enter on the files list, means, we can set default option to either open/edit on double click/enter pressed...

4. please, provide keyboard shortcuts for actions like edit etc.

When I trying to connect to the FTP through the SFTP protocol, and I'm suing the DNS name as hostname I'm getting following problem:

Status:	Connecting to ftp.eu.pega.com...
Response:	fzSftp started, protocol_version=8
Command:	open "amtrak@ftp.eu.pega.com" 22
Error:	Connection timed out after 20 seconds of inactivity
Error:	Could not connect to server
Status:	Waiting to retry...
Status:	Connecting to ftp.eu.pega.com...
Response:	fzSftp started, protocol_version=8
Command:	open "amtrak@ftp.eu.pega.com" 22
Error:	Connection timed out after 20 seconds of inactivity
Error:	Could not connect to server
Status:	Disconnected from server
Status:	Connecting to ftp.eu.pega.com...
Response:	fzSftp started, protocol_version=8
Command:	open "amtrak@ftp.eu.pega.com" 22
Error:	Connection timed out after 20 seconds of inactivity
Error:	Could not connect to server
Status:	Waiting to retry...
Trace:	CControlSocket::DoClose(66)
Trace:	CControlSocket::DoClose(66)
Error:	Connection attempt interrupted by user
Status:	Delaying connection for 1 second due to previously failed connection attempt...
Status:	Connecting to ftp.eu.pega.com...
Trace:	CControlSocket::SendNextCommand()
Trace:	CSftpConnectOpData::Send() in state 0
Trace:	Going to execute C:\Program Files\FileZilla FTP Client\fzsftp.exe
Response:	fzSftp started, protocol_version=8
Trace:	CSftpConnectOpData::ParseResponse() in state 0
Trace:	CControlSocket::SendNextCommand()
Trace:	CSftpConnectOpData::Send() in state 3
Command:	open "amtrak@ftp.eu.pega.com" 22
Trace:	psftp: Implicit session load.
Trace:	Connecting to 10.20.74.70 port 22
Error:	Connection timed out after 20 seconds of inactivity
Trace:	CControlSocket::DoClose(2050)
Trace:	CSftpControlSocket::ResetOperation(2114)
Trace:	CControlSocket::ResetOperation(2114)
Error:	Could not connect to server
Trace:	CFileZillaEnginePrivate::ResetOperation(2114)
Status:	Waiting to retry...
Trace:	CControlSocket::DoClose(66)
Trace:	CControlSocket::DoClose(66)
Status:	Connecting to ftp.eu.pega.com...
Trace:	CControlSocket::SendNextCommand()
Trace:	CSftpConnectOpData::Send() in state 0
Trace:	Going to execute C:\Program Files\FileZilla FTP Client\fzsftp.exe
Response:	fzSftp started, protocol_version=8
Trace:	CSftpConnectOpData::ParseResponse() in state 0
Trace:	CControlSocket::SendNextCommand()
Trace:	CSftpConnectOpData::Send() in state 3
Command:	open "amtrak@ftp.eu.pega.com" 22
Trace:	psftp: Implicit session load.
Trace:	Connecting to 10.20.74.70 port 22
Error:	Connection timed out after 20 seconds of inactivity
Trace:	CControlSocket::DoClose(2050)
Trace:	CSftpControlSocket::ResetOperation(2114)
Trace:	CControlSocket::ResetOperation(2114)
Error:	Could not connect to server
Trace:	CFileZillaEnginePrivate::ResetOperation(2114)

When I use IP address issue is not occurring, logs snipped below

Status:	Connecting to ftp.eu.pega.com...
Response:	fzSftp started, protocol_version=8
Command:	open "amtrak@ftp.eu.pega.com" 22
Error:	Connection timed out after 20 seconds of inactivity
Error:	Could not connect to server
Status:	Waiting to retry...
Status:	Connecting to ftp.eu.pega.com...
Response:	fzSftp started, protocol_version=8
Command:	open "amtrak@ftp.eu.pega.com" 22
Error:	Connection timed out after 20 seconds of inactivity
Error:	Could not connect to server
Status:	Disconnected from server
Status:	Connecting to ftp.eu.pega.com...
Response:	fzSftp started, protocol_version=8
Command:	open "amtrak@ftp.eu.pega.com" 22
Error:	Connection timed out after 20 seconds of inactivity
Error:	Could not connect to server
Status:	Waiting to retry...
Trace:	CControlSocket::DoClose(66)
Trace:	CControlSocket::DoClose(66)
Error:	Connection attempt interrupted by user
Status:	Delaying connection for 1 second due to previously failed connection attempt...
Status:	Connecting to ftp.eu.pega.com...
Trace:	CControlSocket::SendNextCommand()
Trace:	CSftpConnectOpData::Send() in state 0
Trace:	Going to execute C:\Program Files\FileZilla FTP Client\fzsftp.exe
Response:	fzSftp started, protocol_version=8
Trace:	CSftpConnectOpData::ParseResponse() in state 0
Trace:	CControlSocket::SendNextCommand()
Trace:	CSftpConnectOpData::Send() in state 3
Command:	open "amtrak@ftp.eu.pega.com" 22
Trace:	psftp: Implicit session load.
Trace:	Connecting to 10.20.74.70 port 22
Error:	Connection timed out after 20 seconds of inactivity
Trace:	CControlSocket::DoClose(2050)
Trace:	CSftpControlSocket::ResetOperation(2114)
Trace:	CControlSocket::ResetOperation(2114)
Error:	Could not connect to server
Trace:	CFileZillaEnginePrivate::ResetOperation(2114)
Status:	Waiting to retry...
Trace:	CControlSocket::DoClose(66)
Trace:	CControlSocket::DoClose(66)
Status:	Connecting to ftp.eu.pega.com...
Trace:	CControlSocket::SendNextCommand()
Trace:	CSftpConnectOpData::Send() in state 0
Trace:	Going to execute C:\Program Files\FileZilla FTP Client\fzsftp.exe
Response:	fzSftp started, protocol_version=8
Trace:	CSftpConnectOpData::ParseResponse() in state 0
Trace:	CControlSocket::SendNextCommand()
Trace:	CSftpConnectOpData::Send() in state 3
Command:	open "amtrak@ftp.eu.pega.com" 22
Trace:	psftp: Implicit session load.
Trace:	Connecting to 10.20.74.70 port 22
Error:	Connection timed out after 20 seconds of inactivity
Trace:	CControlSocket::DoClose(2050)
Trace:	CSftpControlSocket::ResetOperation(2114)
Trace:	CControlSocket::ResetOperation(2114)
Error:	Could not connect to server
Trace:	CFileZillaEnginePrivate::ResetOperation(2114)
Status:	Disconnected from server
Trace:	CControlSocket::DoClose(66)
Trace:	CControlSocket::DoClose(66)
Trace:	CControlSocket::DoClose(66)
Trace:	CFileZillaEnginePrivate::ResetOperation(0)
Status:	Connecting to 10.20.74.70...
Trace:	CControlSocket::SendNextCommand()
Trace:	CSftpConnectOpData::Send() in state 0
Trace:	Going to execute C:\Program Files\FileZilla FTP Client\fzsftp.exe
Response:	fzSftp started, protocol_version=8
Trace:	CSftpConnectOpData::ParseResponse() in state 0
Trace:	CControlSocket::SendNextCommand()
Trace:	CSftpConnectOpData::Send() in state 3
Command:	open "amtrak@10.20.74.70" 22
Trace:	Connecting to 10.20.74.70 port 22
Trace:	We claim version: SSH-2.0-PuTTY_Local:_Jun_12_2017_19:47:41
Trace:	Server version: SSH-2.0-mod_sftp/0.9.9
Trace:	Using SSH protocol version 2
Trace:	Doing ECDH key exchange with curve nistp256 and hash SHA-256
Trace:	Server also has ssh-dss host key, but we don't know it
Trace:	Host key fingerprint is:
Trace:	ssh-rsa 2048 04:85:cb:60:1d:5f:6b:32:dc:8a:80:61:c1:ee:49:0d dNXoKe1iUca9koXsctajau7ORxljXtinUgVzyLhs7VY=
Trace:	Initialised AES-256 SDCTR client->server encryption
Trace:	Initialised HMAC-SHA-256 client->server MAC algorithm
Trace:	Initialised AES-256 SDCTR server->client encryption
Trace:	Initialised HMAC-SHA-256 server->client MAC algorithm
Command:	Pass: ********
Trace:	Sent password
Trace:	Access granted
Trace:	Opening session as main channel
Trace:	Opened main channel
Trace:	Started a shell/command
Status:	Connected to 10.20.74.70
Trace:	CSftpConnectOpData::ParseResponse() in state 3
Trace:	CSftpControlSocket::ResetOperation(0)
Trace:	CControlSocket::ResetOperation(0)
Trace:	CFileZillaEnginePrivate::ResetOperation(0)
Status:	Retrieving directory listing...
Trace:	CControlSocket::SendNextCommand()
Trace:	CSftpListOpData::Send() in state 0
Trace:	CSftpChangeDirOpData::Send() in state 0
Trace:	CSftpChangeDirOpData::Send() in state 1
Command:	pwd
Response:	Current directory is: "/"
Trace:	CSftpChangeDirOpData::ParseResponse() in state 1
Trace:	CSftpControlSocket::ResetOperation(0)
Trace:	CControlSocket::ResetOperation(0)
Trace:	CControlSocket::ParseSubcommandResult(0)
Trace:	CSftpListOpData::SubcommandResult() in state 1
Trace:	CControlSocket::SendNextCommand()
Trace:	CSftpListOpData::Send() in state 2
Trace:	CSftpListOpData::Send() in state 3
Command:	ls
Status:	Listing directory /
Trace:	CSftpListOpData::ParseResponse() in state 3
Trace:	CSftpControlSocket::ResetOperation(0)
Trace:	CControlSocket::ResetOperation(0)
Status:	Directory listing of "/" successful
Trace:	CFileZillaEnginePrivate::ResetOperation(0)

Dear Concern,

I am facing below error to connecting site entries.

Error: Primary connection and data connection certificates don't match. Error: Transfer connection interrupted: ECONNABORTED - Connection aborted Error: Failed to retrieve directory listing

Even i am able to connect same entries in other PCs & Laptop but these issue occures in 4-5 PC since many days.

We changed the SFTP server settings to a new value but after couple of weeks notice that the settings are reverted to the old server details.

Could you please help investigate this issue.

Refresh does not work properly in the new release

I'm a new FileZilla user using Mac OSX 10.12.5. FileZilla successfully logged onto my hosting server. Now trying to delete some server-side files. Not finding the functionality/workflow to do that. Web hosting provider could not help me either. Would you please point me to the procedure for this.

Alternative, brute-force procedure is cumbersome and potentially dangerous: GET the whole site, selectively delete files/folders locally, PUT the entire site to a new server folder, then ask host to delete the old one on their end.

Thanks in advance.

My understanding is that SCP is working on Filezilla. I work at Skyboxsecurity and am trying to connect to our Linux server. The connection constantly times out with a unauthorized user. This is not the case with WINSCP with the same credentials. Suggestions?

I accepted the update for the FileZilla program and now I cannot login. It does not ask for username anymore. I had my coworker try to connect and she did not accept the update, but she could not connect to the server either.

I must login quickly to retrieve a file. I also had my IT team remove the program and re-install it. Still not able to connect. I am confident I know my login credentials, too.

I am trying to login to FileZilla and I get the following message:

Protocol error: Unknown protocol identifier (0x83 0x83 0x72). Most likely connected to the wrong port. Connection to server closed. My port should be 22. Can you see if that has changed?

I just downloaded FileZilla. I get to the log in screen. The cursor blinks in the cell where I should enter my ftp information, but it does not allow me to enter anything.

I am using a Mac.

I get the following error message when I login. I accepted the update and this is when the issue occurred. My IT removed the update and I have the old version 3.26.2. I received a new password and confirmed the Host, username and port are correct. Still cannot login. It is urgent that I get this resolved as I have to download a file Thursday morning.

Status: Connecting to 66.179.123.210... Response: fzSftp started, protocol_version=8 Command: open "C117569@66.179.123.210" 22 Command: Pass: Error: Disconnected: No supported authentication methods available (server sent: ) Error: Could not connect to server Status: Waiting to retry... Status: Connecting to 66.179.123.210... Response: fzSftp started, protocol_version=8 Command: open "C117569@66.179.123.210" 22 Command: Pass: Error: Disconnected: No supported authentication methods available (server sent: ) Error: Could not connect to server

using SFTP over port 22 to upload files I changed my login information on my linux server and then I changed my login information in the Site Manager, after clicked 'Connect' and successfully connected to my server, I tired to upload some file onto my server and find out that new upload threads reports login incorrect and caused me banned for 10 minutes due to fail2ban installed on my server. And after I restarted Filezila, the problem is gone.

we are a TPA that accesses files for clients through filezilla. we are unable to login as of wednesday - attached screen print we do have another client with filezilla and are able to access those files

Hello filezilla Support,

We are trying to connect our FTP server getting error

Status: Connecting to 212.227.141.236:21... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server

Can you please check and sortout the issue.

Thanks, Mahendra

I'm using FileZilla since Ubuntu 12.04 LTS - here it was 3.5.3. Now I upgraded to Ubuntu 16.04 LTS - it has 3.15.0.2.

Steps to reproduce:

1. Install FTP server which support both connections types - plain FTP and FTPES.
2. Try to connect in both modes from FileZilla:

2.a. write ​ftp://server in Host field to connect with plain insecure FTP in QuickConnect toolbar 2.b. write ftpes://server in Host field to connect with explicit FTP over TLS in QuickConnect

Expected results:

• Previous version (3.5.3 in my case) reacts on user input as expected. It connects as FTP when FTP was requested (​ftp://server in Host field) and as FTPES when FTPES was requested (ftpes://server in Host field).

Actual results:

• Modern FileZilla uses TLS even if user requested plain FTP in QuickConnect field.

I understand that you care about user privacy, but please make FileZilla respect user configuration. User may want to use plain FTP from QuickConnect bar, not from SiteManager.

Running macOS 10.13 using fresh upgrade to Filezilla 3.28.0 on MBA 2011. After launch and login in host server, attempted to upload files to destination directory. Received continuous (every 5 seconds) 530 authentication error. Unable to upload files at all using this version. Am still using version 3.27.1 on my other machine using the same logon credentials and it works fine. See attached log file.

I found that FileZilla 3.28.0 can't import settings from other PC's FileZilla.xml, both on Windows 10 Pro (version 10.0.15063).

How to reproduce it?

1) make some changes in Settings window, adjust Limit local ports to 1025 and 60000 for example.

2) select Files > Export... > Export Settings and export settings to FileZilla.xml

3) copy FileZilla.xml to another PC, select Files > Import... and select FileZilla.xml then check Settins to import settings.

4) restart FileZilla and you will see everything as default value.

i hope is possible order the transfer list in base of all colums is in that

sorry for my english

i spero sia possibile avere la possibilità di ordinare la transfert list in base a qualunque colonna della transfert list

All of current technologies that provide File Transfer Protocol re upload whole updated and edited file(s) even if the file changes by a minimum of one byte. This is not sufficient in term of upload time, bandwidth usage and logic. While this can be solved and proposed a solution to the stated scenario. By enabling the FTP client and FTP server to treat only the differences between local files and remote files. Thus for this will amazingly reduce FTP transfer time and speed up the process.

manda informe de problemas de filezilla

Since version 3.28.0-rc1 FileZilla is not opening in Linux Mint, I tried opening the "/FileZilla3/bin/filezilla" with two clicks but nothing happens. When accessing the terminal as root and trying to execute the same BIN the command returns the following error:

"./filezilla: error while loading shared libraries: libpng16.so.16: can not open shared object file: No such file or directory " Info OS:

NAME="Linux Mint" VERSION="18.1 (Serena)" ID=linuxmint ID_LIKE=ubuntu PRETTY_NAME="Linux Mint 18.1" VERSION_ID="18.1" VERSION_CODENAME=serena UBUNTU_CODENAME=xenial

SFTP server: Solarwinds Serv-U 15.1.5.10. Client: FileZilla 3.29.0

FileZilla sends a constant "request-id" in each packet. According to RFC ​https://tools.ietf.org/id/draft-ietf-secsh-filexfer-13.txt:

'request-id'

Each request from the client contains a 'request-id' field. Each response from the server includes that same 'request-id' from the request that the server is responding to. One possible implementation is for the client to us a monotonically increasing request sequence number (modulo 2^{32). There is, however, no particular requirement the 'request-id' fields be unique.}

The server shows 'request-id' in braces. Example line as follows: [30] Fri 24Nov17 09:04:58 - (000015) {0x00000100} SSH_FXP_REALPATH: path: "."

'request-id' is 0x00000100 in this packet. Replay should contains the same number.

The problem is that FileZilla always sends the same 'request-id'. It makes the log analysis very difficult especially that according to the standard, the SFTP commands don't have to be send in the same sequence. I have tried other client software and this behaviour is present only when using FileZilla client.

Attaching: FileZillaLog.txt: Log from the client, level 4 ServerLog - ClientFileZilla.txt: Full logs of FileZilla's session from the server ServerLog - ClientWinSCP.txt: Full logs of WinSCP's session from the server as reference of a good session.

I'm not considering this behaviour as a bug since standard says it is not a mandatory to have an unique id, however it is very important feature request for troubleshooting purposes.

Hello Admin,

Is it able to sync the data from remote FTP site with Filezilla in a scheduled date. Filezilla is a great tool. But we need to download the data everyday, The FTP server is in other country, due to the time difference, we can't download the data in time. If FileZilla can auto sync the data from remote site. it would be much helpful.

Kindly view the image and please check it

​https://drive.google.com/open?id=1cAlldZzcNJ-LJNkDd_di-pLE-3B-sxNK ​https://drive.google.com/open?id=126mbOgB9BbkNRzyMXiY01fqxuiY4qaed

When I have a long queue to upload and then one file with same name happens to exist already, a dialog will appear asking about action for existing file. Like in file explorers usually, these verifications are asked after the whole queue has processed. With FileZilla they are asked according to queue order. Therefore an unpleasant surprise waits if you have left your computer for hours expecting that all the uploaded files are uploaded. I know that I can choose default action but it depends on the situation.

I have 12089 *.html files in folder. In server preview - only 9998 *.html files in folder. Folder sizes too not equal. Filter files is wrong. Please, correct this greatest soft! Best regards, Serg.

Je télécharge sur ma seedbox avec ruTorrent v.3.8 un fichier qui comprend 1 dossier et 5 fichiers

Avec FileZilla 3.30, je retrouve un Dossier Vide c-a-d pas de fichier dans le Dossier

ASSERT INFO:
./src/gtk/toplevel.cpp(988): assert "m_widget" failed in Show(): invalid frame

BACKTRACE:
[1] wxTopLevelWindowGTK::Show(bool)
[2] wxTopLevelWindowBase::Destroy()
[3] wxAppConsoleBase::CallEventHandler(wxEvtHandler*, wxEventFunctor&, wxEvent&) const
[4] wxEvtHandler::ProcessEventIfMatchesId(wxEventTableEntryBase const&, wxEvtHandler*, wxEvent&)
[5] wxEventHashTable::HandleEvent(wxEvent&, wxEvtHandler*)
[6] wxEvtHandler::TryHereOnly(wxEvent&)
[7] wxEvtHandler::ProcessEventLocally(wxEvent&)
[8] wxEvtHandler::ProcessEvent(wxEvent&)
[9] wxEvtHandler::SafelyProcessEvent(wxEvent&)
[10] wxTimerImpl::SendEvent()
[11] g_main_context_dispatch
[12] g_main_loop_run
[13] gtk_main
[14] wxGUIEventLoop::DoRun()
[15] wxEventLoopBase::Run()
[16] wxAppConsoleBase::MainLoop()
[17] wxEntry(int&, wchar_t**)
[18] main /home/fuxsocy/Desktop/filezilla-3.30.0/src/interface/locale_initializer.cpp:98
[19] __libc_start_main
[20] _start

i reported yesterday with a bug of wxWidget, i tried this version: wxWidgets-WX_3_0_BRANCH and recompile filezilla 3.30.0, it gave me the error

Dear support,

I am using the last filezilla version 3.30 64bits and I wanted to inform you about this strange behavior : When a generic proxy is used and configured in Filezilla (FTP connection is send through HTTP CONNECT), after BASIC authentication on the proxy and logon on the remote FTP server, the Filezilla client send the following command :

"Request: CLNT FileZilla"

Most of the remote FTP server breaks the connection when this command is sent. Without a proxy configured, Filezilla don't send this command and the connection work fine. Other client like "Total Commander" don't send this CLNT command, so we need currently to use this tool to connect to FTP servers through our proxies. Whould it be not better to remove the sending of command "Request: CLNT FileZilla" when generic HTTP proxy is used ?

Thanks a lot,

Regards,

Hi,

I am trying to connect my website to FTP server but cannot do so. My website is hosted on the wordpress hosting I want to access my .httaccess file and other directories so initially I was receiving a message of 'time out' so I changed the time limit but I am receiving this Status: Connection attempt failed with "ETIMEDOUT - Connection attempt timed out".

It would be great if you can help. Thanks in advance!

I use Filezilla to bulk upload images. However, I don't need it to upload Thumbs.db every time I upload a folder.

I'd like there to be a list of filenames that are automatically ignored, if not hidden, from Filezilla. This can extend to other hidden and system files like the .bridge files Adobe Bridge makes when a folder has custom view or rating settings.

This could potentially be used to hide .tmp files of all types as well.

It takes 130 hours to download 4Gb with a 10Mb/s download speed. If I use google drive or Teamviewer to download the same file it takes me 20 minutes or 2 hours for the same file. Try it on this moment also, it will take 8 hours (still to go)

The provider checked the internet connection already, changed the cable and modem. Speedtest result is 11Mb/s almost every test.

What can I do?

When transferring files of large sizes the server appears to lock the file out and then won't allow you to write to it again.

No AV is install on the system and everything is allowed through the firewall. It will resume normally but after a point it stops resuming and gives a "550 Writing to file failed" in the log. Permissions to the file and everything are okay and deleting the file and starting again gets it uploading again but it inevitably fails.

Currently attempting to change block size to see if this helps with the problem. The file in question is almost a terabyte in size.

Archlinux, Filezilla compiled with wxGTK v. 3.0.3.1. The better decription of the problem is the pictures I attached. I think all fonts of all controls should have the same size like it was with GTK2 build.

When trying to log on to FileZilla Server from a specific client machine, i receive the following entries:

Status: Resolving address of XXX Status: Connecting to XXX... Status: Connection established, waiting for welcome message... Response: 421 Proxy is closed Error: Could not connect to server

On the other end we have FileZilla Server v 0.9.60

The connection work fine for other client machines.

Hi everyone I found a bug in this also an exploit it allows anyone to connect to ftp in this program without knowing the password someone has hacked my ftp client server and the person who did told me and reported it back to me I need it fixed asap please can you message me on Twitter modz2014 or email dawgz9295@… its really important I will show you how its done not showing links or a trying as I dont want this to be leaked

​https://i.imgur.com/aR1OUFd.png

====================

gdb filezilla GNU gdb (Ubuntu 7.11.1-0ubuntu1~16.5) 7.11.1 Copyright (C) 2016 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <​http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-linux-gnu". Type "show configuration" for configuration details. For bug reporting instructions, please see: <​http://www.gnu.org/software/gdb/bugs/>. Find the GDB manual and other documentation resources online at: <​http://www.gnu.org/software/gdb/documentation/>. For help, type "help". Type "apropos word" to search for commands related to "word"... Reading symbols from filezilla...done. (gdb) r Starting program: /usr/local/bin/filezilla [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Reading locale option from /home/fuxsocy/.config/filezilla/filezilla.xml [New Thread 0x7fffe8bdc700 (LWP 2896)] [New Thread 0x7fffe3fff700 (LWP 2897)] [New Thread 0x7fffe37fe700 (LWP 2898)] [New Thread 0x7fffe2ffd700 (LWP 2915)] [New Thread 0x7fffe27fc700 (LWP 2916)]

Thread 1 "filezilla" received signal SIGSEGV, Segmentation fault. longjmp_chk (env=0x0, val=1) at ../setjmp/longjmp.c:32 32 ../setjmp/longjmp.c: No such file or directory.

Since a couple of versions of filezilla it is not possible to select files and directories simply by pulling an area around them.

The mouse pointer shows very erratic behavior when doing so (It jumps immediately to another monitor).

The behavior of the mouse by doing exactly the same on the local site is normal like expected.

How to recreate: start application, flickers and crashes. Filezilla version: filezilla 3.32.0-1 libfilezilla 0.12.1-1

latest from official Arch repo

What I have tried so far: deleting config file. that didn't help, downgrading filezilla, that didn't help either. Try to downgrade wayland didn't help either.

Everything worked like 2 days ago, after some updates, I cannot run filezilla. Unfortunately I didn't check which packages I updated but must have been something for wayland/gdk

OS: Arch Linux Kernel: x86_64 Linux 4.15.14-1-ARCH Resolution: 1920x1080 DE: GNOME WM: GNOME Shell WM Theme: Flat Rem

running on wayland.

Starting program: /usr/bin/filezilla 
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/usr/lib/libthread_db.so.1".
Reading locale option from /home/anon/.config/filezilla/filezilla.xml
[New Thread 0x7fffe9562700 (LWP 5010)]
[New Thread 0x7fffe8d61700 (LWP 5011)]
[New Thread 0x7fffe3fff700 (LWP 5012)]
[New Thread 0x7fffe37fe700 (LWP 5054)]
[New Thread 0x7fffe2a6d700 (LWP 5056)]
wxD-Bus: Signal from /org/freedesktop/DBus, member NameAcquired
wxD-Bus: Reply with serial 2
wxD-Bus: Reply to RegisterClient, our object path is /org/gnome/SessionManager/Client34

(filezilla:5009): Gdk-CRITICAL **: 18:30:22.834: gdkdisplay-wayland.c:1317: Truncating shared memory file failed: Invalid argument

Thread 1 "filezilla" received signal SIGSEGV, Segmentation fault.
0x00007fffedd71d26 in wl_proxy_marshal_constructor () from /usr/lib/libwayland-client.so.0
(gdb) bt full
#0  0x00007fffedd71d26 in wl_proxy_marshal_constructor () at /usr/lib/libwayland-client.so.0
#1  0x00007ffff4adaccb in  () at /usr/lib/libgdk-3.so.0
#2  0x00007ffff4ae4ab6 in  () at /usr/lib/libgdk-3.so.0
#3  0x00007ffff4ae4b37 in  () at /usr/lib/libgdk-3.so.0
#4  0x00007ffff4a90b2d in  () at /usr/lib/libgdk-3.so.0
#5  0x00007ffff4a90c21 in gdk_cairo_create () at /usr/lib/libgdk-3.so.0
#6  0x00007ffff604af04 in  () at /usr/lib/libwx_gtk3u_core-3.0.so.0
#7  0x00007ffff6129907 in wxNativeDCFactory::CreateClientDC(wxClientDC*, wxWindow*) () at /usr/lib/libwx_gtk3u_core-3.0.so.0
#8  0x00007ffff612b5e1 in wxClientDC::wxClientDC(wxWindow*) () at /usr/lib/libwx_gtk3u_core-3.0.so.0
#9  0x00007ffff62a75c8 in wxGenericTreeCtrl::CalculatePositions() () at /usr/lib/libwx_gtk3u_core-3.0.so.0
#10 0x00007ffff62a8b91 in wxGenericTreeCtrl::DoDirtyProcessing() () at /usr/lib/libwx_gtk3u_core-3.0.so.0
#11 0x00007ffff62a8d6c in wxGenericTreeCtrl::OnInternalIdle() () at /usr/lib/libwx_gtk3u_core-3.0.so.0
#12 0x00007ffff62320e3 in wxWindowBase::SendIdleEvents(wxIdleEvent&) () at /usr/lib/libwx_gtk3u_core-3.0.so.0
#13 0x00007ffff6232118 in wxWindowBase::SendIdleEvents(wxIdleEvent&) () at /usr/lib/libwx_gtk3u_core-3.0.so.0
#14 0x00007ffff6232118 in wxWindowBase::SendIdleEvents(wxIdleEvent&) () at /usr/lib/libwx_gtk3u_core-3.0.so.0
#15 0x00007ffff6232118 in wxWindowBase::SendIdleEvents(wxIdleEvent&) () at /usr/lib/libwx_gtk3u_core-3.0.so.0
#16 0x00007ffff6232118 in wxWindowBase::SendIdleEvents(wxIdleEvent&) () at /usr/lib/libwx_gtk3u_core-3.0.so.0
#17 0x00007ffff6232118 in wxWindowBase::SendIdleEvents(wxIdleEvent&) () at /usr/lib/libwx_gtk3u_core-3.0.so.0
#18 0x00007ffff6232118 in wxWindowBase::SendIdleEvents(wxIdleEvent&) () at /usr/lib/libwx_gtk3u_core-3.0.so.0
#19 0x00007ffff6232118 in wxWindowBase::SendIdleEvents(wxIdleEvent&) () at /usr/lib/libwx_gtk3u_core-3.0.so.0
#20 0x00007ffff60c3930 in wxFrame::SendIdleEvents(wxIdleEvent&) () at /usr/lib/libwx_gtk3u_core-3.0.so.0
#21 0x00007ffff61056ee in wxAppBase::ProcessIdle() () at /usr/lib/libwx_gtk3u_core-3.0.so.0
#22 0x00007ffff6033cba in wxApp::DoIdle() () at /usr/lib/libwx_gtk3u_core-3.0.so.0
#23 0x00007ffff6033dd4 in  () at /usr/lib/libwx_gtk3u_core-3.0.so.0
#24 0x00007ffff1c272c6 in g_main_context_dispatch () at /usr/lib/libglib-2.0.so.0
#25 0x00007ffff1c276a1 in  () at /usr/lib/libglib-2.0.so.0
#26 0x00007ffff1c279d2 in g_main_loop_run () at /usr/lib/libglib-2.0.so.0
#27 0x00007ffff4f6edaf in gtk_main () at /usr/lib/libgtk-3.so.0
#28 0x00007ffff6052fd6 in wxGUIEventLoop::DoRun() () at /usr/lib/libwx_gtk3u_core-3.0.so.0
#29 0x00007ffff5a07e84 in wxEventLoopBase::Run() () at /usr/lib/libwx_baseu-3.0.so.0
#30 0x00007ffff60b7e2e in wxDialog::ShowModal() () at /usr/lib/libwx_gtk3u_core-3.0.so.0
#31 0x0000555555677252 in  ()
#32 0x0000555555873392 in  ()
#33 0x0000555555873c82 in  ()
#34 0x00007ffff5b52a3e in wxEvtHandler::ProcessEventIfMatchesId(wxEventTableEntryBase const&, wxEvtHandler*, wxEvent&) () at /usr/lib/libwx_baseu-3.0.so.0
#35 0x00007ffff5b52b44 in wxEventHashTable::HandleEvent(wxEvent&, wxEvtHandler*) () at /usr/lib/libwx_baseu-3.0.so.0
#36 0x00007ffff5b52f1d in wxEvtHandler::TryHereOnly(wxEvent&) () at /usr/lib/libwx_baseu-3.0.so.0
#37 0x00007ffff5b52fa4 in wxEvtHandler::ProcessEventLocally(wxEvent&) () at /usr/lib/libwx_baseu-3.0.so.0
#38 0x00007ffff5b53006 in wxEvtHandler::ProcessEvent(wxEvent&) () at /usr/lib/libwx_baseu-3.0.so.0
#39 0x00007ffff5b52d57 in wxEvtHandler::SafelyProcessEvent(wxEvent&) () at /usr/lib/libwx_baseu-3.0.so.0
#40 0x00007ffff5ab33f5 in wxTimerImpl::SendEvent() () at /usr/lib/libwx_baseu-3.0.so.0
#41 0x00007ffff6065692 in  () at /usr/lib/libwx_gtk3u_core-3.0.so.0
#42 0x00007ffff1c27da3 in  () at /usr/lib/libglib-2.0.so.0
#43 0x00007ffff1c272c6 in g_main_context_dispatch () at /usr/lib/libglib-2.0.so.0
#44 0x00007ffff1c276a1 in  () at /usr/lib/libglib-2.0.so.0
#45 0x00007ffff1c279d2 in g_main_loop_run () at /usr/lib/libglib-2.0.so.0
#46 0x00007ffff4f6edaf in gtk_main () at /usr/lib/libgtk-3.so.0
#47 0x00007ffff6052fd6 in wxGUIEventLoop::DoRun() () at /usr/lib/libwx_gtk3u_core-3.0.so.0
#48 0x00007ffff5a07e84 in wxEventLoopBase::Run() () at /usr/lib/libwx_baseu-3.0.so.0
#49 0x00007ffff59cb537 in wxAppConsoleBase::MainLoop() () at /usr/lib/libwx_baseu-3.0.so.0
#50 0x00007ffff5a5c308 in wxEntry(int&, wchar_t**) () at /usr/lib/libwx_baseu-3.0.so.0
#51 0x000055555562386c in  ()
#52 0x00007ffff4115f4a in __libc_start_main () at /usr/lib/libc.so.6
#53 0x00005555556335ca in  ()

I can successfully use MS-Windows cmd FTP I login and get this message OK. Current restricted directory is /

I enter: cd www dir

I get the entire website listing

When I use FileZilla version 3.32.0 I get this error

Status: Resolving address of www.organizeyourlife.org Status: Connecting to 204.27.63.50:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Logged in Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (204,27,63,50,46,36) Command: MLSD Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listing Status: Disconnected from server Status: Resolving address of www.organizeyourlife.org Status: Connecting to 204.27.63.50:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Logged in Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (204,27,63,50,147,5) Command: MLSD Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listing

Hi,

This comes with new (very last news version).

When you uses this : 1- upload a new version of a file with a different name. 2- after upload : rename the file and give the name of the file which is to be replaced

Before, with previous version, you get : 1- A panel to confirm (existing file with same name : replace) 2- Replacement 3- (in previous-previous) the position into the list was not changing

Now, new ( 3.32.0) you get : 1- A panel to confirm (existing file with same name : replace) 2- Both files are deleted, this most of time (there are conditions which produce the normal - old - behavior, but I could not find exactly the conditions. Note :

• that when this occurs we have two refreshes (since-prev-prev : I have not the version id) of screen while before we were getting this refresh just once.
• with the "just before version" the refresh was not clean because we had, as told, two displays and at the end the user was reaching the top of the list and had to go back manually to the position of the file changed to verify.
• now when it functions normally the file is replaced and focus stays on the file (generally for the two files : I name the new updated with a name so that it will be displayed just before the file to replace into the list). I think that the second display corresponds to the "delete all" invalid phase.

Best regards

Trebly

Since 3.26, we've had a few users report that once they log in and begin to try and transfer files, they are suddenly logged out, and then asked for their password again. Putting in their password again is not accepted (says its incorrect), so now the user cannot do anything else. Closing Filezilla down and opening it back up has no effect.

To make matters worse, in our environment, we use Red Hat's IDM LDAP server (based off of the Free IPA project). When this happens to these users, their account in IDM is locked due to too many failed logins and an administrator has to go into the IDM server and unlock the account.

It keeps transfering the files every time I send FTP no matter if file has changed or not

Ticket #10832 showed this as closed in v3.17.0.1. I just updated a machine with v3.33.0.0 and our AlienValue issued similar message as in Ticket #10832 (below).

I have verified that the UninstallString is unquoted in my registry settings for both Client and Server. ray

-- Alert --

Software\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall\FileZilla Client|C:\Program Files\FileZilla FTP Client\uninstall.exe Software\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall\FileZilla Server|C:\Program Files (x86)\FileZilla Server\uninstall.exe

Impact:

A local attacker could gain elevated privileges by inserting an executable file in the path of the affected service or uninstall entry.

Solution:

Either put the listed vulnerable paths in quotation by manually using the onboard Registry editor or contact your vendor to get an update for the specified software that fixes this vulnerability.

Hi,

Tried to uploading the data into remote server, Every 19 secs coming up with error. Error : Network Error : software caused connection abort file transfer failed

Is anyone able to help with this please?

Thank you.

I'm getting a False Positive for my installer file created with reputable Tarma.com installer. The error is Win.Trojan.Antifw-172 I have been using Tarma created installers for many years without incident. I finally was able to upload the file as a Zip using another FTP client. You can find the file at ​ftp://euzinho1845351@ftp.toolboxw.com/download/ToolBoxW-Setup.zip

It is not my AV software that is flagging this. It is FilZilla Client. See screenshot attached.

I always have to reupload audio files when the program says they were successful. Never fails that I have to upload again.

Hello!

Currently when I upload an image to a specific sub folder, the image is uploaded successfully, but then will not show up on the live site, even after waiting multiple days, and clearing my cache.

The images will work properly when uploaded to the Incoming folder, but not each subfolder within the Incoming folder.

Would you be able to help me figure out why uploading to these folders is not working, even after we get a successful message.

Thank you, Melissa

On starting, FileZilla pops up this error box:

Error loading xml file

The file 'C:\Users\jcarnuccio\AppData\Roaming\FileZilla\filezilla.xml' could not be loaded. Error parsing end element tag at offset 8160.

For this session the default settings will be used. Any changes to the settings will not be saved.

OK

and it looks like all previous settings are lost.

Hey, I having an issue with filezilla on uploading files and editing them from the server. the problem accure on any server and not on specific one. I have tested with diffrent file editors and computers but the problem still stays. this issue very interupt me while working while editing files on live site and the files doesn't uploaded at their full weight.

I have logged the issue while I did try to edit a file and it uploaded only part of the full file (it's not even 0.5mb file..) here is the log:

2018-06-26 10:57:43 21792 3 Status: Starting upload of C:\Users\leon\AppData\Local\Temp\fz3temp-2\index.php 2018-06-26 10:57:43 21792 3 Command: CWD /public_html/itcare 2018-06-26 10:57:43 21792 3 Response: 250 OK. Current directory is /public_html/itcare 2018-06-26 10:57:43 21792 3 Status: Retrieving directory listing of "/public_html/itcare"... 2018-06-26 10:57:43 21792 3 Command: TYPE I 2018-06-26 10:57:43 21792 3 Response: 200 TYPE is now 8-bit binary 2018-06-26 10:57:43 21792 3 Command: PASV 2018-06-26 10:57:43 21792 3 Response: 227 Entering Passive Mode (5,100,252,97,162,223) 2018-06-26 10:57:43 21792 3 Command: MLSD 2018-06-26 10:57:43 21792 3 Response: 150 Accepted data connection 2018-06-26 10:57:43 21792 3 Response: 226-Options: -a -l 2018-06-26 10:57:43 21792 3 Response: 226 4 matches total 2018-06-26 10:58:12 21792 3 Command: TYPE A 2018-06-26 10:58:12 21792 3 Response: 200 TYPE is now ASCII 2018-06-26 10:58:12 21792 3 Command: PASV 2018-06-26 10:58:12 21792 3 Response: 227 Entering Passive Mode (5,100,252,97,168,133) 2018-06-26 10:58:12 21792 3 Command: STOR index.php 2018-06-26 10:58:12 21792 3 Response: 150 Accepted data connection 2018-06-26 10:58:13 21792 3 Response: 226-File successfully transferred 2018-06-26 10:58:13 21792 3 Response: 226 0.315 seconds (measured here), 264.48 Kbytes per second 2018-06-26 10:58:13 21792 3 Status: File transfer successful, transferred 87,358 bytes in 1 second 2018-06-26 10:58:13 21792 3 Status: Retrieving directory listing of "/public_html/itcare"... 2018-06-26 10:58:13 21792 3 Command: TYPE I 2018-06-26 10:58:13 21792 3 Response: 200 TYPE is now 8-bit binary 2018-06-26 10:58:13 21792 3 Command: PASV 2018-06-26 10:58:13 21792 3 Response: 227 Entering Passive Mode (5,100,252,97,157,193) 2018-06-26 10:58:13 21792 3 Command: MLSD 2018-06-26 10:58:13 21792 3 Response: 150 Accepted data connection 2018-06-26 10:58:13 21792 3 Response: 226-Options: -a -l 2018-06-26 10:58:13 21792 3 Response: 226 4 matches total 2018-06-26 10:58:13 21792 3 Status: Directory listing of "/public_html/itcare" successful

If you need any more information please inform me. filezila version 3.33.0