Custom Query (10423 matches)

FileZilla does not check if the saved last GUI screen position is still valid upon opening of the software.

• Dual screen system with desktop extension on a second monitor.
• Open filezilla and use it on the second monitor. Then close the program
• Disable the second screen, on a labtop remove the cable for example, the full desktop should now only show on the main/single screen.
• Open Filezilla, it is not visible (or completely visible) as it used the coordinates as if the desktop was extended.

The above is also true if only a fraction of the program is visible on the current desktop.

Solution check upon startup not only if the top-left coordinates are within the current visible desktop area but also if you can see a reasonable portion of filezilla on the desktop. If the top-left coordinate is just within the visible area than you still cannot use the program until you can drag it completely back on the current desktop area.

Steps to reproduce:

1. Open several connections to different sites in several tabs
2. Start some uploads and/or downloads on each of them
3. Look at the transfer queue at the bottom

Expected: the files currently transferring or queued to be transferred are listed; you should be able to tell which one are being transferred to/from which of the servers you are connected to

Observed: several attributes of the files are shown: current path, remote path, etc, but there's no indication of what server they are being transferred to/from. So, if you queued downloads to several servers, you cannot tell them apart. How f*ing stupid is that??

There is a very dangerous shortcut on Mac that one would confuse with a very common MacOS Finder shortcut.

The combination is ⌘↓ (command + arrow down).

In MacOS Finder it is used to ENTER a directory. In Filezilla it is used to start uploading local directory or file to remote server immediately.

I just had a concrete case where my left side (local) cursor was on an important yet secret folder and the remote was a foreign server that definitely should not have my files.

So I started going into my secret local folder by pressing ⌘↓ but instead of entering the folder it started uploading my secret folder immediately. Fortunately I was quick enough to cancel the upload AND I had DELETE permissions on the remote side. Otherwise the consequences could have been quite serious.

If you move the Filezilla window to a second monitor and disconnect it, the window will keep out of reach of the first monitor. So it must be moved with keyboard as the mouse can't grab the window title bar.

System:

FileZilla Version 3.26.1 (lang ger) Windows 10 Version 1703 (Creators Update) Laptop monitor res: 1366x700 External monitor: 1920x1080

Every time we need new installation we need old data and settings from File Zilla. If we connect our software with Google mail we can sync data so that next we have to log in only to get data from our system. We can use this feature on all of the operating systems!

Hi,

I have issue in connecting with FTP host even internet speed is very good. I`m getting below errors...

Status: Resolving address of ftp.vedamonline.com Status: Connecting to 4x.xx.xx.xxx:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of ftp.vedamonline.com Status: Connecting to 4x.xx.xx.xxx:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: AUTH TLS Response: 234 AUTH command ok. Expecting TLS Negotiation. Status: Initializing TLS... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server

Status: Resolving address of ftp.farrockawaycog.com Status: Connecting to 66.196.82.114:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Command: USER farrockaway1318@…@farrockawaycog.com Response: 331 User farrockaway1318@…@farrockawaycog.com OK. Password required Command: PASS * Response: 530 Login authentication failed Error: Critical error: Could not connect to server

it would be useful if there was a REGEXP or a file type restraint possibility, maybe with temporary ban

Regards

I often have a large download or upload from my web site and have to go somewhere. I then right click the download and responding to (Action after completion) select (close file zilla) when completed.

Then when I open filezilla again and try to use it, the app appears not to open. I.e. it keeps closing down the application.

I suggest that you give an option to allow file zilla to close only once until next opening of the app. I.e. reset it to keep the settings it had before the user selected to have it close down automatically.

This way, after opening up again, it will not keep closing down all the time.

Kind regards

Mark

Tooltips in file transfer queue panel shows outdated information.

Steps to reproduce:

1) Queue 4-5 files.

2) Let at least the first file transfer complete.

3) Mouse over the first (currently downloading) item to display the tooltip. It will display a previous, finished item.

Pipe symbols (|) and perhaps some others are displayed as their UTF-8 value (%7C) in the title of the FTP window once connected to a server.

This is a minor formatting issue for people using multi-domain hosting with pipe in their "User" field.

E.g. ftp.somedomain.com|admin In the title appears as: ftp.somedomain.com%7Cadmin@…

I have spent too much time looking for a way to name the log file produced by filezilla using month, day, year, time. How is this done? According to Filezilla's documentation, it says I need to look for: Just enable 'Use a different logfile each day

per this site:

​https://wiki.filezilla-project.org/Server_logs

I looked for the Use a different logfile each day in the settings and it doesn't exist. Using filzilla version 3.27.1

I tried changing the file name using this info on a Win10 system client, but it doesn't work. ( ​https://wiki.filezilla-project.org/Date_and_Time_formatting )

My goal is to have the log file named by month,day,year, time. How is that done?

Hello,

#1. I have seeing that some files are not getting transferred to point B from A, but the failure is not written in the filzilla log. There is no mention of the fact the transfer never happened.

#2. Some of the files being transferred are being "renamed" by filzilla. For example, if I have a filed named, audience.jpg. when Filzilla transfer to from a server to a server, it changes the name to Audience.jpg. How do I stop it from doing that?

I am finding that files are not copied from one server to another. I would have never know that files were missing in the transfer if I didn't run setfacl on the files transferred. Setfacl uses a list generated from getfacl on prod as input. This input list is use to compare against what is transferred so permissions can be set.

What doesn't filzilla show me the files/directories that don't get transferred for whatever reason?

Both I and a remote designer my employer uses are unable to connect to FileZilla. I receive the following message when trying to connect...

Status: Resolving address of app.smartfile.com Status: Connecting to 209.43.40.67:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Logged in Status: Retrieving directory listing... Command: PWD Response: 200 Protection set to Private Error: Failed to parse returned path. Error: Failed to retrieve directory listing Error: GnuTLS error -110: The TLS connection was non-properly terminated. Status: Server did not properly shut down TLS connection Status: Disconnected from server: ECONNABORTED - Connection aborted

I have downloaded and installed the latest FileZilla version 3.28.0.

Unfortunately, it crashes on startup. The error message reads:

filezilla: error while loading shared libraries: libpng16.so.16: cannot open shared object file: No such file or directory

I tried installing libpng16-16 (libpng12-0 was already installed), and the error message changed to:

filezilla: /usr/lib/x86_64-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.22' not found (required by filezilla)

As libstdc versions 5 and 6 are already installed, I don't know how to proceed. In the meantime, I have fallen back to version 3.27.1.

Thank you.

Hi, Love fielzilla, amazing peace of software and so fast!

I have two ideas: A) in this scenario:

When a single user working on a file (Lets assume a PHP file). Some times we amend a minor changes. Lets say we forgot a semi coma somewhere. Normally we re-upload the whole file.

Lets say the file size is so big (1 MB) (Just assumption)

Is there a way to upload the changes only?

i.e. the difference between two files in local machine and remote server is just one character. So is it possible somehow to add a new feature to the client and server to understand this changes.

I can't propose a mechanism to achieve this feature; its only an idea that comes to my mind and personally it makes sense. But don't know much about possible technology implementation.

If this if to be implemented; I think needs changes to client application and server application to adapt.

I am not sure if this is valid; but I guess this needs artificial inelegance technology.

If to be implemented; this will amazingly reduce ftp traffic for single user having lots of files of type of PHP in our example.

Can't be sure this would work for binary files; but at least can you consider my idea for ASCI files?

B) In normal routine, when I need to upload a big number of different files. I zip them into one and single archive.

Upload to server. Then from the server panel, I unzip.

This so much reduce upload time.

So, technically; is it possible to let ftp client zip files before upload, then at server side, the ftp server will unzip in the same folder structure.

Do you think this could be two good ideas?

Do you think this (if valid) would reduce the whole internet ftp traffic; said that I guess 1000s or more developers using ftp daily to upload data?

Your feedback and input in my ideas so much appreciated.

Thank you so much

Regards

Note: Dose this trac have voting system for the ideas? Can't find it?

Hello,

FileZilla can't log in to server. Log in failed, because FileZilla have a big bugs. We have try with 6 Servers and with another FTP Client. Only FileZille Client is not works....

after installing 3.29.0 version I could not connect to the server. I even tried going back to previous version but connection cannot be re-established anymore.

Hello guys,

This week I started having access problem with my FileZilla where it showed me a network error message (​https://screenshot.net/pt/dn369an). I have checked my server access data several times and they are correct. Check my direct access to the server and they are accessing normally. It only started giving trouble when trying to access via FileZilla.

Now, it just not show any more messages (​https://drive.google.com/file/d/0B-3bBaQBNJ0mV2Q3RUJlenFGT3U3Z2tFaHdfd3pINmlzRDdV/view). I try to access, just as I always did, but nothing happens.

Please, could you help me?

Appreciate, Rodrigo Carlos

I love Filezilla and till this latest version it has been excellent at downloading multiple files (for me it downloads 2 simultaneously) and while doing so maxing the bandwidth and splitting it pretty much evenly between the files.

This latest version seems to occasionally (say 5 out of every 10 loads of the program) either (1) pick up only a fraction of the available bandwidth for single file downloads, and/or (2) allocate the bandwidth unevenly between multiple files, e.g. 1 will get 300-600 KiB/s with the second getting 4.1MiB/s.

The workaround for the above is to right click on one of the downloading files, and uncheck 'Process Queue'. If I then wait for like 10 secs, the bandwidth seems to be allocated correctly (2.1MiB/s to each file).

NOTE: this has happened over several days, and after restarts of both the FTP server supplying the files, the modem, and computer running Filezilla. I did not notice it in previous versions. It therefore seems like it could be some kind of low priority issue.

Thanks for a great product and for any help with this issue.

If you try to use the mouse to drag a rectangular selection box around files listed in either the local or remote file list panes, the mouse cursor jumps to the bottom right corner of the screen.

This seems to happen only when the horizontal scroll bar is visible.

Start your selection in the blank space below the listed files.

If you do not change the position of the scroll bars after your mouse cursor jumps, you may be able to try again and successfully drag a selection around the files.

I am not able use filezila last few days..this error coming when i am using other laptop this fttp runing but in my laptop not runing

I saw another user had an issue like mine, but my anti-virus has not changed and this used to work.

1) Update completes with the status message of "The new version could not be downloaded, pleas retry later."

2) Under "show details" it says:

Started update check on 2018-01-15 12:20:27 Own build type: official Downloading /update.php?platform=x86_64-w64-mingw32&version=3.29.0&osversion=6.1&osarch=64&updated=1&cpuid=sse,sse2,sse3,ssse3,sse4.1,sse4.2,pclmulqdq&initial=0 Resolving address of update.filezilla-project.org Connecting to 136.243.154.122:443... Connection established, initializing TLS... Verifying certificate... TLS connection established, sending HTTP request File transfer successful, transferred 36,244 bytes in 1 second Parsing 36244 bytes of version information. Found new nightly 2018-01-15 Found new release 3.30.0 Downloading /filezilla/FileZilla_3.30.0_win64-setup.exe Resolving address of downloads.sourceforge.net Connecting to 216.34.181.59:80... Connection established, sending HTTP request Resolving address of downloads.sourceforge.net Connecting to 216.34.181.59:80... Connection established, sending HTTP request Resolving address of cytranet.dl.sourceforge.net Connecting to 74.82.59.181:443... Connection established, initializing TLS... Verifying certificate... TLS connection established, sending HTTP request File transfer successful, transferred 7,906,720 bytes in 2 seconds

3) Download appears to have worked, but the software doesn't recognize the fact.

4) There could be something with my computer that is causing a problem, but shouldn't that result in a different status message?

5) It appears that you have sent ou version 3.29 without the ability for it to update itself? So I will see if I can do a manual update to 3.30.

6) Lord help the non-technical fans of Filezilla!!

No reply needed unless I am wrong about this. :-)

Thanks, Chris

Hello,

This error message appears when i try to add a file on my filezilla :

Status: Connecting to 213.186.33.206:21... Status: Connection established, waiting for welcome message... Status: Insecure server, it does not support FTP over TLS. Status: Logged in Status: Creating directory '/www2/camille-seewald/wp-content/uploads/2018'... Command: CWD /www2/camille-seewald/wp-content/uploads Response: 250 OK. Current directory is /www2/camille-seewald/wp-content/uploads Command: MKD 2018 Response: 550 Can't create directory: Disk quota exceeded

But i don't have a lot of files on my disk... So i don't understand. Can you please explain me how to fix that ?

Thank you and sorry for my bad english.

Camille Seewald

Desconectado do servidor Estado: Postergando a conexão por 5 segundos devido à falha na tentativa anterior... Estado: A resolver o endereço de ftp.wdp.com.br Estado: Conectando 67.23.244.40:21... Estado: Conexão estabelecida, esperando mensagem de boas-vindas... Estado: A iniciar o TLS... Estado: Verificando certificado... Estado: Conexão TLS estabelecida. Comando: USER wdp Resposta: 331 User wdp OK. Password required Comando: PASS Resposta: 530 Login authentication failed Erro: Erro crítico: Não foi possível conectar ao servidor

The item selected last in file or directory tree browser (both local and remote) is not scrolled to view, when the file or directory tree browser is navigated into via tabbing despite the item gaining focus due to the navigation. Inconsistent with behaviour when navigating in the browser; moving in directory structure or file browser with arrow keys keeps the selected item in view.

Hi,

The remote search suddenly stopped working even after we updated FileZilla to the latest version, please check asap.

Thank you.

Can save save/transver all files from your client to the server except .taccess files never have this issues before and using you from years.... is your quality and support will change in microsoft?

Good Morning FileZilla team,

I am contacting you on behalf of Amcrest (​http://amcrest.com/) support team and in order to request a feature to be added to your FileZilla Server.

We would like to ask for FileZilla server to allow the client (in this case a surveillance camera) to retrieve server file structure and capacity from any type of disconnection recovery.

Please let me know if you have any further inquiry regarding this request.

Best Regards,

Hugo

After logging in I was asked for my password but the system would not accept it. I got the following message:-

Status: Insecure server, it does not support FTP over TLS. Command: USER ftp@… Response: 331 User ftp@… OK. Password required Command: PASS Response: 530 Login authentication failed Error: Critical error: Could not connect to server

I had just loaded the latest update and I have been using the same password ever since I started using FileZiller.

Help, how do I update/set a new password?

When running in a home network with the ports mapped in the router FileZilla Server can't tell whether a connection is comming from the LAN or the Internet.

Look at this example setup:

1. FileZilla Server Host
   • LAN IP: 192.168.0.5
   • FTP Port: 21
   • PASV settings:
     • Port Range: 5000-6000
     • Retrieve external IP address from: selected
     • Don't use external IP for local connections checked
2. Network Router/Firewall
   • External IP: 200.200.200.200 (dynamic)
   • LAN IP: 192.168.0.1
   • Mapped:
     • TCP 21 to 192.168.0.5 port 21
     • TCP 5000-6000 to 192.168.0.5 range 5000-6000

This is very common for home and small businesses where NAT is not available and the IP is dynamic.

Since the external IP is dynamic Retrieve external IP address from: is the only acceptable option. If you uncheck Don't use external IP for local connections most connections from LAN will fail because most household routers I've seen don't handle LAN -> External IP connections properly. This is most noticeable when the router was provided by your ISP so you can't tweak it or update the firmware.

The issue here is that passive connections comming from 192.168.0.1 respond with PORT 192,168,0,5,XX,YY instead of PORT 200,200,200,200,XX,YY because FileZilla server has no way of knowing those connectios are actually comming from the outside.

Fortunately modern clients will properly handle cases where the PORT response us pointing to LAN IP addesses but not all do.

What I'm requesting is a way to tell FileZilla Server which LAN IP addresses should be treated as external when sending PASV PORT responses.

In the previos example we add:

1. FileZilla Server Host
   • PASV settings:
     • External LAN IPs: 192.168.0.1

Then the responses are:

• source: 192.168.0.0/24 except 192.168.0.1 response PORT 192,168,0,5,XX,YY
• source: 192.168.0.1 response PORT 200,200,200,200,XX,YY

This can be extended to support more complex scenarios but those are outside the scope of this request.

When I try to upload files and folders now, instead of properly doing so, filezilla client on windows 10 is using a dot instead of a slash for the last part of a path in a directory name or file name.

For instance, if I try to upload a file into my root public_html directory (centos 7/cPanel) for any domain, where the file name is for instance, index.html and the upload path is /home/myadm/public_html, instead of placing the file in the public_html folder, filezilla is creating the file in /home/myadm as public_html.index.html.

Similarly, if I try to upload style.css to /home/myadm/public_html/css, instead, filezilla is creating a file in /home/myadm, called public_html.css.style.css.

HELP!!!

/trunk/source/Interface/StatusCtrl.cpp r8791

void CStatusCtrl::DoStreamIn(int extraFlags) {

EDITSTREAM es; es.dwCookie = (DWORD)this; Pass a pointer to the CString to the callback function es.pfnCallback = RichEditStreamInCallback; Specify the pointer to the callback function.

StreamIn(extraFlags | SF_RTF, es); Perform the streaming

}

void CStatusCtrl::DoStreamIn(int extraFlags) {

EDITSTREAM es; es.dwCookie = (DWORD_PTR)this; Pass a pointer to the CString to the callback function es.pfnCallback = RichEditStreamInCallback; Specify the pointer to the callback function.

StreamIn(extraFlags | SF_RTF, es); Perform the streaming

}

Good day! Please help, can not log in under ih88021, maybe someone changed the password? With respect to Michael.

Hi,

this is what happends if i try to update:

​https://sheepchen.net/nextcloud/index.php/s/rk0TWHVuwpzl3gH

Form said "can't be downloaded", but logging says "transfer successfull"

Sometimes mousecursor jumps in local fileexplorer window when try to mark multiple files/folders.

I click for drag and then the cursor jumps (while having markingbox) to the rightdown corner, like his position is set to infinity in mouseMoveEvent.

This doesn't happen if there are allready marked items.

(feels like 2 events compete at mouseevent)

special: I have a 2 monitor setup where my primary monitor is the left one, and the secondary monitor is the right one. On the logical site the left monitor is on the left site (So when I leave my primary(right) monitor on the left site I enter the left monitor).

On devrais pouvoir afficher les fenêtres en liste et multi colones.

Comme dans l'image join

Upon completing a download, FileZilla always records the following:

Status: Disconnected from server Response: 421 Timeout - try typing a little faster next time Error: GnuTLS error -110: The TLS connection was non-properly terminated. Status: Server did not properly shut down TLS connection Status: Disconnected from server: ECONNABORTED - Connection aborted Status: Disconnected from server

This is a HostGator site.

I have create my own FTP Server which dialog correctly with the file zila client. But when I rename a directory which I don't have the authorization to renamed it, the server refused the RNFR commadn and send 550 "access denied" but the file zila client don't take in count this reponse and rename the direcotory. I'm obligate to restart the file zila client to use it correctly.

The "Remember Passwords" dialog box, which asks you if you want to save passwords with a master password or not at all, has the word "reconnnect" which should be "reconnect." See below:

Hello, I'm Kağan, Vulnerability Reasearcher. I found vulnerability Filezilla 3.33 on Kali Linux 2018.3 x64 and I just published proof-of-concept type exploit-db but I managed to write shell code. If this version works with root authority, the authority can be priv-esc. You should know that I did not public. Also, vulnerability is not working Windows OS.

Good luck, I love filezilla!

Click : ​https://www.exploit-db.com/exploits/45576/

FileZilla client starts with invisible window on the desctop. Steps to reproduce:

1. Install the FileZilla client on the Windows 10 x64 using double monitors with the second monitor used as an desktop extention.
2. Start the FileZilla client and move/resize its window to be placed on the second monitor completely.
3. Exit the FileZilla client
4. Turn off the second monitor
5. Restart Windows 10
6. Start the FileZilla client again - it will be invisible. Workaround:
   1. set focus on the invisible FileZilla client window
   2. enter <ALT>+<space> for the window context menue
   3. select "move" and use arrow key to move the window back to the visible desktop part.

I guess the FileZilla client stores the last window placing and use this information in none-start manner to retore the window on the same place. The Microsoft programs like IE do not have such behavior: if the extended desktop is available the IE will restart on the old place. If not - on the visible area.

Feature request: That ALT+d be used as a keyboard shortcut/hotkey to access the hostname input box.

This is in keeping with the same being used in firefox, windows explorer, etc.

This feature would streamline connecting to hosts, especially anonymous ftp sites requiring no credentials (such as open source repositories).

Currently, the host input box is the default focus on application launch. However, re-accessing the box via keyboard is not possible (at least in Win10) via alt+h due to "help" menu also being alt+h.

Somewhat-Related, but not really: ​https://trac.filezilla-project.org/ticket/11274#no1

the first file you create after opening FileZilla has the correct timestamp -- any additional files you may create will have the same timestamp as the first file you created. this issue does not apply when directories are created. i first noticed this issue today when a new file i created showed as being several hours old -- at first i thought maybe the server time zone was wrong, or that the FileZilla time zone offset was wrong, but i eventually determined the timestamp was based upon the first created file.

presumably this is due to FileZilla creating a single file and then reusing it, but it seems like a simple way to improve this would be just to "touch" the file to update it's timestamp before uploading it.

Hi Guys,

When I download the latest release of FileZilla Client for Mac, I get an error message displaying that it is not supported on this type of mac and the file might be corrupted. I'm on macOS Mojave. Any idea why? It was displaying the same error message before I upgrade to Mojave. I use FileZilla most of my time so it is kind of critical for me not to have access to it atm..

Thanks and take care! :)

When I tried to create account "bert" on this ticket system, I got this message:

Warning: Username bert doesn't match local naming policy.

This should probably say "Error: ", because it did not register the user.

Also, it would be useful if it'd say what is the local naming policy; what's wrong with "bert".

Hello! I found a critical bug. I was found all my passwords in <USERDIR>/AppDataRoaming/FileZilla/recentservers.xml encrypted in Base64. I think, you should fix it, there is a big security risk!

Buenos días, En la sección "Ayuda", subsección "Acerca de..." aparece una ventana con un botón "Copiar al portapapeles", que me ha dado 2 resultados diferentes de los que arroja el pantallazo. Adjunto evidencias.

Steps to reproduce:

• connect to a server
• on the right (remote) panel, right-click on a folder and do "Download folder". Make sure you pick a folder that will take a while to download.
• While the files are being added to the queue and downloaded, right-click on another folder in the remote panel

Expected: the option "Download folder" in the dropdown menu should be available, and by clicking on it you should be able to appending also the new selected folder's content to the queue for download. There's no reason whatsoever why you shouldn't be able to do that just "because" queuing and/or downloading of files from another folder is in progress

Observed: the option "Download folder" is greyed out until the current download is finished.

This has now happened several times on W10. I open FileZilla Pro, and it prompts me to install a new version. When I do, it fails, saying it can't write the .exe - I suspect it's trying to update, and not closing the executing program.

I have to uninstall the old version and reinstall, and it's then necessary to re-enter the registration key.

Shoddy.

Hallo zusammen,

seit dem 15.03. können wir uns auf unserem FTP Server nicht mehr anmelden und erhalten immer folgende Fehlermedlung:

Server sendete eine zusätzliche Login-Aufforderung. Sie müssen den Login-Typ 'interaktiv' verwenden. Fehler: Kritischer Fehler: Herstellen der Verbindung zum Server fehlgeschlagen

FileZilla FTP Client

Hi.

Up until version 3.41.2 of the client, when using the Windows build and choosing to delete either a single or group of files from a server, the "Question" sound event would be triggered - this can be found within the Windows Control Panel/Sound/Sounds section. Whilst this may seem like a small thing, it is very useful if the Delete option is accidentally chosen. Please could this be re-added?

Thank you.

When I use the "Create a directory and enter it" option on the local side with a folder name ending in a dot (e.g. "A.T.O.M."), two new folders are shown on the top pane: "A.T.O.M" and "A.T.O.M." - this is because Windows doesn't support names ending in dots so the trailing dot is removed. If I leave the newly created directory and refresh the file list, the folder ending with a dot disappears.

When asking file zilla to close filezilla once after a queue is done, there's a pop-up that there are still files in queue ( after the queue is already done ) this is likely because the last file to be used clogs it up, or because it first tries to close filezilla and then changes the variable to say the queue is finished. This bug however doesn't occur on "Close Filezilla" alone, only on "Close Filezilla once"

The waiting list feature (Bottom right on the user interface) is incremented with the size of what is sent. In our case, this amount is calculated with the size of the file shown in FileZila and not effective the size.

The size of the file may change is modified in the same time on the FS. FileZila send the tight file with the right size but incréments its waiting list feature with a wrong amount (the one shown in the interface at the moment of the action and not the size on the FS).

Currently when I am uploading a large file, FZ server seems to spin up the drive, load one chunk/packet into memory, close the file, upload the file and then repeat. It does this a 2~3 times a second until the file is finished uploading (perhaps several hours later). This is a waste of power and needlessly wears the drive (in the case of a physical drive).

I would love if you could buffer significantly more (many megabytes) into memory to avoid this.

But... obviously pretty low priority given that it sounds difficult to code for the amount of visible payoff. Think of it as helping the environment? For my case use alone it could allow at least one drive to be turned off/spun down several more hours a day.

Attempting to connect to update.filezilla-project.org is failing due to HSTS and the server using a self-signed certificate rather than a public CA or Let's Encrypt.

For SSH public key connections Filezilla seems to always (and only) use Pageant when available in preference to either the generic keys specified in Setup/Connection/FTP/SFTP or a specific key set for the connection in Site Manager/Logon Type=keyfile. This seems counter-intuitive, especially using the agent in preference to a connection specific key, and is confusing when other applications (e.g. Putty) use any specified keyfile first and fall back to using the agent on failure/missing.

In my case I'm using GPG-agent as a stand in for Pageant. Unlike Pageant which pre-caches decrypted private keys and therefore will always be able to offer them, GPG-agent offers the SSH key IDs but only decrypts them as needed via a password popup, and then expires the passwords from memory after a short interval, if that password prompt is cancelled FZ gives up and doesn't even fallback to using the password file(s).

My usage case is that I would like to use GPG-agent for regular Putty connections and some occasional Filezilla connections (where no keyfile is specified), but for regular FZ connections (e.g. to development servers) to use a dedicated locked down key that is used and cached long term by the FZ session without ever troubling the agent. As it stands currently FZ will always use (and seemingly can only use) the more widely privileged keys known to the agent, keeping them cached unnecessarily if activity is frequent, and/or prompting repeatedly for the password if activity is less frequent than the agent's cache expiry timeout.

GPG-Agent running, password given

2019-06-03 23:36:16 3860 2 Trace: Host key fingerprint is:
2019-06-03 23:36:16 3860 2 Trace: ssh-ed25519 256 de:c0:96:73:50:2f:82:0d:fe:36:4d:56:dd:c6:5b:66 ivHymwfP9DmUleDDSqNuqcgVZPMZAOHkRA3LXuIAD7A=
2019-06-03 23:36:16 3860 2 Trace: Initialised AES-256 GCM client->server encryption
2019-06-03 23:36:16 3860 2 Trace: Initialised AES256 GCM client->server MAC algorithm (in ETM mode) (required by cipher)
2019-06-03 23:36:16 3860 2 Trace: Initialised AES-256 GCM server->client encryption
2019-06-03 23:36:16 3860 2 Trace: Initialised AES256 GCM server->client MAC algorithm (in ETM mode) (required by cipher)
2019-06-03 23:36:16 3860 2 Trace: Pageant is running. Requesting keys.
2019-06-03 23:36:16 3860 2 Trace: Pageant has 2 SSH-2 keys
2019-06-03 23:36:16 3860 2 Trace: Successfully loaded 1 key pair from file
2019-06-03 23:36:16 3860 2 Trace: Trying Pageant key #0
2019-06-03 23:36:22 3860 2 Trace: Sending Pageant's response
2019-06-03 23:36:22 3860 2 Trace: Access granted
2019-06-03 23:36:22 3860 2 Trace: Initiating key re-exchange (enabling delayed compression)
2019-06-03 23:36:22 3860 2 Trace: Opening session as main channel

GPG-Agent NOT running

2019-06-03 23:31:21 3860 1 Trace: Host key fingerprint is:
2019-06-03 23:31:21 3860 1 Trace: ssh-ed25519 256 de:c0:96:73:50:2f:82:0d:fe:36:4d:56:dd:c6:5b:66 ivHymwfP9DmUleDDSqNuqcgVZPMZAOHkRA3LXuIAD7A=
2019-06-03 23:31:21 3860 1 Trace: Initialised AES-256 GCM client->server encryption
2019-06-03 23:31:21 3860 1 Trace: Initialised AES256 GCM client->server MAC algorithm (in ETM mode) (required by cipher)
2019-06-03 23:31:21 3860 1 Trace: Initialised AES-256 GCM server->client encryption
2019-06-03 23:31:21 3860 1 Trace: Initialised AES256 GCM server->client MAC algorithm (in ETM mode) (required by cipher)
2019-06-03 23:31:21 3860 1 Trace: Successfully loaded 1 key pair from file
2019-06-03 23:31:21 3860 1 Trace: Offered public key from "X:\Crypto\Personal\philg_piglet_rsa_home_np.ppk"
2019-06-03 23:31:21 3860 1 Trace: Offer of public key accepted, trying to authenticate using it.
2019-06-03 23:31:21 3860 1 Trace: Access granted
2019-06-03 23:31:21 3860 1 Trace: Initiating key re-exchange (enabling delayed compression)
2019-06-03 23:31:21 3860 1 Trace: Opening session as main channel

GPG-Agent running, password cancelled

2019-06-03 23:30:32 3860 1 Trace: Host key fingerprint is:
2019-06-03 23:30:32 3860 1 Trace: ssh-ed25519 256 de:c0:96:73:50:2f:82:0d:fe:36:4d:56:dd:c6:5b:66 ivHymwfP9DmUleDDSqNuqcgVZPMZAOHkRA3LXuIAD7A=
2019-06-03 23:30:32 3860 1 Trace: Initialised AES-256 GCM client->server encryption
2019-06-03 23:30:32 3860 1 Trace: Initialised AES256 GCM client->server MAC algorithm (in ETM mode) (required by cipher)
2019-06-03 23:30:32 3860 1 Trace: Initialised AES-256 GCM server->client encryption
2019-06-03 23:30:32 3860 1 Trace: Initialised AES256 GCM server->client MAC algorithm (in ETM mode) (required by cipher)
2019-06-03 23:30:32 3860 1 Trace: Pageant is running. Requesting keys.
2019-06-03 23:30:32 3860 1 Trace: Pageant has 2 SSH-2 keys
2019-06-03 23:30:32 3860 1 Trace: Successfully loaded 1 key pair from file
2019-06-03 23:30:32 3860 1 Trace: Trying Pageant key #0
2019-06-03 23:30:34 3860 1 Trace: Pageant failed to answer challenge
2019-06-03 23:30:34 3860 1 Error: Pageant failed to answer challenge
2019-06-03 23:30:34 3860 1 Trace: CSftpControlSocket::OnTerminate without error
2019-06-03 23:30:34 3860 1 Trace: CControlSocket::DoClose(66)
2019-06-03 23:30:34 3860 1 Trace: CControlSocket::ResetOperation(66)
2019-06-03 23:30:34 3860 1 Trace: CSftpDeleteOpData::Reset(66) in state 3
2019-06-03 23:30:34 3860 1 Error: Could not connect to server
2019-06-03 23:30:34 3860 1 Trace: CFileZillaEnginePrivate::ResetOperation(66)
2019-06-03 23:30:34 3860 1 Status: Waiting to retry...

Testing the URL: ​https://update.filezilla-project.org with online certificate checkers report errors. Missing intermediate certificate seems to be the problem. Chain ends at filezilla-project.org which is not a valid Root CA.

This problem has been reported with bug #11934 and rejected. I have tested this at multiple sites and ​https://update.filezilla-project.org always fails to load. Mostly tested with Chrome or Firefox on macOS.

I'm try updating manually to new version 3.43.0, always work it, but didn't work it now, problems with libc6(GLIBC), I'm using Linux Mint 19 x64, now warning "libc6 not found", but have version 2.27, but not working, I did a rollback to 3.42.1 and is working again. What is the solution, please?

The remote server window still indicate I've 9998 files in it, but I've 10050 files there and still adding but that indicator never updates.

Thank you. Francesco

I use FileZilla for uploading managing and files and folders in multiple sites on my laptop for multiple clients.

Sometimes I leave my laptop at hotel or a coffee shop, etc

I am suggesting to add an option to ask for password if FileZilla is inactive for certain time like 30 minutes. Admins can change or de-activate it at any time.

Also, it would be good to add different access level for file and folder management & access like allowing multiple users accessing a site, yet each person only can access and manage certain file and folders. It would be a great security resource for larger projects.

Thx,

Matt

Ik open het programma en meld dat er een update is. Ik klik op upgrade en hij download juist. Echter bij het installeren loopt het fout omdat een bestand nog in gebruik is van een programma. Begrijpelijk want het programma was nog niet volledig verdwenen.(melding cont..., abord,ingore) Bij het heropenen van het programma werd hij geuninstalleert en even later had ik een directory met niets in . Bij het aanklikken van het uitvoerbaar bestand van de nieuwe versie werd deze juist geinstalleert.

mvg Lieven

Info.plist needs to be updated for the macOS app to reflect FileZilla's latest (3.46.3) system requirements, which is 10.13.2

Currently reads as follows:

<key>LSMinimumSystemVersion</key> <string>10.11</string>

HOW TO SOLVE THIS

​https://i.imgur.com/HcshOFf.png

hi im trying to transfer a DLL to my server and it keeps saying access deniaed and what the help from the place i got the dll from says i gotta get the server to add it for me ? can i get some help pls also i cant do it becasue im on windows?

Al iniciar una transmisión a mi servidor habitual mediante FileFilla, me ha solicitado la actualización y después de actualizarla, ya no me permite acceder a mi servidor. Adjunto captura pantalla.

If you Ctrl+Backspace on the directory bar, it adds a little symbol instead of removing the word.

Hello:

New to this. Need the following information.

Host: Port: I have created my username and a password but it will not connect without these two things HOST: PORT:.

Thank you! Regina

Hi,

Actually i have sorting settings set to "Case insensitive", which is fine on remote view.

But in download queue this ordering settings is not active. So if you click on the download queue header to sort by name, the order is case sensitive. The result is if you download all folder of a folder, assuming you remove each finished folder, you have to scroll in remove view to find the latest finished folder.

It will be better to have the sorting case settings acting on both remove view and download queue (to be consistent).

With versions newer then 3.47.1 i.e. 3.48 or 3.48.1-rc1 I cannot connect anymore to my cloud server using SFTP. Here is an extract from the logfile:

Version 3.48 with Error

2020-05-14 15:29:14 19688 1 Status: Verbinde mit SERVER.XX... 2020-05-14 15:29:14 19688 1 Antwort: fzSftp started, protocol_version=9 2020-05-14 15:29:14 19688 1 Befehl: open "USER@…" 22 2020-05-14 15:29:14 19688 1 Status: Using username "USER". 2020-05-14 15:29:14 19688 1 Befehl: Pass: 2020-05-14 15:29:14 19688 1 Status: Access denied 2020-05-14 15:29:14 19688 1 Fehler: FATAL ERROR: No supported authentication methods available (server sent: publickey) 2020-05-14 15:29:14 19688 1 Fehler: Herstellen der Verbindung zum Server fehlgeschlagen

Version 3.47.1 working

2020-05-14 15:25:27 9536 1 Status: Verbinde mit SERVER.XX... 2020-05-14 15:25:28 9536 1 Antwort: fzSftp started, protocol_version=9 2020-05-14 15:25:28 9536 1 Befehl: open "USER@…" 22 2020-05-14 15:25:28 9536 1 Befehl: Pass: 2020-05-14 15:25:28 9536 1 Status: Connected to SERVER.XX

So working with the older version works. So does switching to FTPS.

Thank you for your support and for providing FileZilla.

J.Polster

Tengo un servidor de minecraft de Box To play. La app de FileZilla me da un error:Error: No se pudo conectar al servidor Estado: Esperando para reintentar... Lleva 1h para reintentar. ¿Que puedo hacer para que funcione?

I tried to upgrade my copy of Filezila and it kept coming back saying it could not copy files, i think. I did a shutdown and restart of my system and it locked up in the process. I have to physically turn off the system and reboot. Got the same error again. Went to the web site and downloaded the client, this time it came down as "FileZilla_3.49.0_win64_sponsored-setup.exe". Same problem. I had done an update last June, and that version would install. Just thought you should know.

i have used win10 with latest ver (19041.388). when i download latest ver. filezilla, my system detect virus. so please solve this issue thanks.

screenshot ​https://prnt.sc/toedvk

FileZile updated to the lates version 3.49.1.

For that the installer was downloaded to the downloads folder, file FileZilla_3.49.1_win64-setup.exe and was installed without problems.

In the same folder remained the previous installers FileZilla_3.48.1_win64-setup.exe, FileZilla_3.48.0_win64-setup.exe and FileZilla_3.47.2.1_win64-setup.exe

The anti-malware software mention in the summary Malwarebytes 4.1.0, flagged the installer file FileZilla_3.49.1_win64-setup.exe and only this one as Malware

Gide lines and reasons why this may happend are explaned in this post on the Malwarebytes forum:

​https://forums.malwarebytes.com/topic/238670-machinelearninganomalous-detections-and-explanation/

It seems that something has changed in the installer or the Malwarebytes software. In any case I considered necessary to inform about the issue.

Received "You do not have permission to list this directory" when in fact Filezilla Client was given Full Disk Access and Full Folder Access in the Preferences.

Dear Team,

I am trying to login FileZilla it is not working before it is working fine ,Last 3 days an word's it is not working .Please help on this is ASAP.

Thanks & Regards, Subba Reddy.P 8184999469

Changing a file during downloading is possible thanks to the inode system used by Linux.

But I suggest allowing changing it while in queue, to prevent forgetting it until the transfer has finished.

Location: https://filezilla-project.org/ Typo in text: European Union-spondored "bug bounty" program found some security issues which have promptly been fixed.

function 'preserve timestamps of transferred files' can't work on SFTP protocol.

Please check, thanks.

You still have Virus infected versions on your servers. Please remove them as my favorite Mac updating app will not allow FileZilla to be checked for updates as you've been known to distribute malware in the downloads. These infected downloads are still present on your servers.

When

• server contains a file with contents "abc"
• client contains a file with contents "bac"
• files have the same size
• files have same date
• files have different time

Then

• the directory comparison view shows no difference (no colored line).

Trojans are being identified in your FileZilla_3.53.0_win64_sponsored-setup.exe software, can you understand why?

Hello dear,

I have a bug with FileZilla PRO on MacBook Pro 2019! I can't maximize the application!

Tell me, How to solve the problem?

Just a minor thing, but it'd be really useful if when resizing the panes, the left and right both changed together. Especially when trying to synchronise things, it's helpful to have things lined up, and I regularly find myself adjusting the height of the left browser pane and then trying to adjust the right side to match. I think most people would want them to remain aligned, so that should be the default action. There might be odd cases where having them different heights would be useful, but perhaps that could be catered for by holding down the Shift key. I.e. When moving the horizontal divider, move both equally -- unless Shift is pressed.

Hello,

i am using filezilla it's worked fine but from somedays am not able to connect some specific server and that server I can connect before but now it's not connect not any error. so can you please help me in this.

Hello, it is currently version 3.54.1 of filezilla, 7429 days since initial release. I have read about 50 changelogs and none of them have contained "added confirmation for drag and drop" meaning that I still have to use WinSCP (yuck), please add this as soon as possible (thousands of people have been asking for drag and drop confirmation for decades as they don't like to destroy their server with the accidental flick of a mouse cursor)

On a linuw serveur I have a file

w-r--r--. 1 ephilippot@… utilisa. du domaine@… 494 17 juin 10:59 000_C_R_CODCF_IRISB2_21F1520374.B2.ordre

when i look this file with filezila client the size of this file is 0.

I think that the probleme comes from "@" in the name of user or spaces in the groupe name.

You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:

a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.

Modidying Filezilla to create Filezilla Pro and adding features and then charging a required subscription fee violates the terms of the GPL license.

I love the directory comparison feature, but I don't use it much as I'd like because the colors are hard for me to look at for long.

Wondering if it would be possible in a future release to allow user to change the opacity on the colors.

e.g. in this image I took the colors and set the opacity to 20% which is much easier on my eyes.

If each user could set that in their own preferences, that'd be fantastic. :0)

I recently was uploading a set of directories with FileZilla Client via SFTP, with most of the queued directories containing subdirectories. I noticed that the subdirectories are placed in the queue AFTER all of the parent directories. In most cases this is not a concern, but it makes it very tedious to remove or add items to/from the queue while it is not completely finished, and gives a false sense that a directory is "done transferring" halfway through the queue, when in reality its contents may not be transferred until much later. In my case, the destination has very limited disk space and I wanted to move directories out of the destination before the queue completed, and I was unable to do this reliably.

I feel it is more functional to position a queued directory's subdirector(y|ies) immediately after their parent directory in the queue, rather than at the end of all the other parent directories. That would be a much more intuitive queueing order to most users, I believe.

To Reproduce:

Start a transfer queue of multiple directories at once (shift+click to select many, perhaps, then begin the transfer), where at at least one of the directories queued has contents within a subdirectory. Observe the queue "finish" the files that were in the directory, then interrupt the transfer (to simulate a full disk, for example). At first glance, it appears a directory's queue entries were successfully processed, but in reality there is are entire other sets of files still waiting at the end of the queue. A natural urge in a disk full situation would be to move some of the "completed" transfers out of the destination, but in this case, that would be disastrous, as the contents of their subdirectories have not yet transferred.

Proposed solution:

Always append subdirectory contents immediately after their parent directory's contents in the transfer queue.

Thank you so much for the excellent and valuable work you do.

Hello I am using coz Server with sftp on MVS. I try to open an MVS DATAset with VTAM.TEST or with 'VTAM.TEST.' but I don't get an answer. Is filezilla able to work with MVS-Datasets under sftp Protokoll?

Hello, my Client got an Problem where she couldnt log in in our FTP Server it worked before but now she only gets the error Failed to connect to the server, on other PCs it worked but for her not. Is it maybe because she is using a vpn to connect to our Server and using wlan that it is too slow.

best regards Adrian Reider

I downloaded and installed the update, 3.57.0. Now it will not connect when I enter command-R. Says TLS connection is established, enters the password (which has not changed), then times out. I restarted, but with same problem. Other FTP software works just fine. Only change is the new FileZilla.

Hello , if i am downloading just new files only from a server , and if there is old files exist in my local folder , i only need to see the status of the files that been skipped , i can see the logs up there but its too fast to track

on the transfer queue section i see

SEVER/LOCAL FILE - SIZE - DIRECTION - REMOTE FILE - SIZE - PRIORITY - TIME

I just need to see a new column shows the status of the new files that was processed last , downloaded or skipped

thank you

On the logging settings panel (see screen capture) there is a browse button. I assumed this would open the folder specified - ie my windows temporary folder. However, clicking BROWSE opens a folder to which I had recently exported a site definition, not the folder containing the logs.

This is not a serious problem as I was able to browse to the appropriate folder, and then view the logs, but that does take a little time! If I correctly understood the way this is supposed to work it would be nice to have it fixed.

In windows 11, I have enabled Windows's Long Path and having a LONG PATH enabled ftp server, when using FileZilla Client, somehow the file is not uploaded into intended long path dir, the maximum length of the dir that i can upload a file into is around below 1.024 characters.

So for example I am uploading a file into a dir in the ftp server which having length of 1.822 characters, filezilla client will cut off the directory and will uploaded it into below 1.024 characters length directory, instead of in the 1.822 character length directory.

How to overcome the 1.024 character length directory into 32.767 character length (​https://docs.microsoft.com/en-us/windows/win32/fileio/maximum-file-path-limitation?tabs=cmd), 32.767 is the new maximum total characters path length .