Custom Query (8172 matches)

​https://sourceforge.net/projects/filezilla/files/FileZilla_Client/

Link "Looking for the latest version?" points to 3.17.0_x64 version, but the actual latest version is 3.25.1

Not sure if it's possible but could the "Install New Version" prompt appear when closing Filezilla rather than opening it. Generally I am opening Filezilla to complete a task and don't want to stop what I'm doing to do an update, however once the task is completed I would happily allow an update to run.

Steps to reproduce:

1. Open several connections to different sites in several tabs
2. Start some uploads and/or downloads on each of them
3. Look at the transfer queue at the bottom

Expected: the files currently transferring or queued to be transferred are listed; you should be able to tell which one are being transferred to/from which of the servers you are connected to

Observed: several attributes of the files are shown: current path, remote path, etc, but there's no indication of what server they are being transferred to/from. So, if you queued downloads to several servers, you cannot tell them apart. How f*ing stupid is that??

Every time we need new installation we need old data and settings from File Zilla. If we connect our software with Google mail we can sync data so that next we have to log in only to get data from our system. We can use this feature on all of the operating systems!

Hi,

I have issue in connecting with FTP host even internet speed is very good. I`m getting below errors...

Status: Resolving address of ftp.vedamonline.com Status: Connecting to 4x.xx.xx.xxx:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of ftp.vedamonline.com Status: Connecting to 4x.xx.xx.xxx:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: AUTH TLS Response: 234 AUTH command ok. Expecting TLS Negotiation. Status: Initializing TLS... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server

Status: Resolving address of ftp.farrockawaycog.com Status: Connecting to 66.196.82.114:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Command: USER farrockaway1318@…@farrockawaycog.com Response: 331 User farrockaway1318@…@farrockawaycog.com OK. Password required Command: PASS * Response: 530 Login authentication failed Error: Critical error: Could not connect to server

I often have a large download or upload from my web site and have to go somewhere. I then right click the download and responding to (Action after completion) select (close file zilla) when completed.

Then when I open filezilla again and try to use it, the app appears not to open. I.e. it keeps closing down the application.

I suggest that you give an option to allow file zilla to close only once until next opening of the app. I.e. reset it to keep the settings it had before the user selected to have it close down automatically.

This way, after opening up again, it will not keep closing down all the time.

Kind regards

Mark

Pipe symbols (|) and perhaps some others are displayed as their UTF-8 value (%7C) in the title of the FTP window once connected to a server.

This is a minor formatting issue for people using multi-domain hosting with pipe in their "User" field.

E.g. ftp.somedomain.com|admin In the title appears as: ftp.somedomain.com%7Cadmin@…

I have spent too much time looking for a way to name the log file produced by filezilla using month, day, year, time. How is this done? According to Filezilla's documentation, it says I need to look for: Just enable 'Use a different logfile each day

per this site:

​https://wiki.filezilla-project.org/Server_logs

I looked for the Use a different logfile each day in the settings and it doesn't exist. Using filzilla version 3.27.1

I tried changing the file name using this info on a Win10 system client, but it doesn't work. ( ​https://wiki.filezilla-project.org/Date_and_Time_formatting )

My goal is to have the log file named by month,day,year, time. How is that done?

Hello,

#1. I have seeing that some files are not getting transferred to point B from A, but the failure is not written in the filzilla log. There is no mention of the fact the transfer never happened.

#2. Some of the files being transferred are being "renamed" by filzilla. For example, if I have a filed named, audience.jpg. when Filzilla transfer to from a server to a server, it changes the name to Audience.jpg. How do I stop it from doing that?

I am finding that files are not copied from one server to another. I would have never know that files were missing in the transfer if I didn't run setfacl on the files transferred. Setfacl uses a list generated from getfacl on prod as input. This input list is use to compare against what is transferred so permissions can be set.

What doesn't filzilla show me the files/directories that don't get transferred for whatever reason?

Both I and a remote designer my employer uses are unable to connect to FileZilla. I receive the following message when trying to connect...

Status: Resolving address of app.smartfile.com Status: Connecting to 209.43.40.67:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Logged in Status: Retrieving directory listing... Command: PWD Response: 200 Protection set to Private Error: Failed to parse returned path. Error: Failed to retrieve directory listing Error: GnuTLS error -110: The TLS connection was non-properly terminated. Status: Server did not properly shut down TLS connection Status: Disconnected from server: ECONNABORTED - Connection aborted

I have downloaded and installed the latest FileZilla version 3.28.0.

Unfortunately, it crashes on startup. The error message reads:

filezilla: error while loading shared libraries: libpng16.so.16: cannot open shared object file: No such file or directory

I tried installing libpng16-16 (libpng12-0 was already installed), and the error message changed to:

filezilla: /usr/lib/x86_64-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.22' not found (required by filezilla)

As libstdc versions 5 and 6 are already installed, I don't know how to proceed. In the meantime, I have fallen back to version 3.27.1.

Thank you.

Hi, Love fielzilla, amazing peace of software and so fast!

I have two ideas: A) in this scenario:

When a single user working on a file (Lets assume a PHP file). Some times we amend a minor changes. Lets say we forgot a semi coma somewhere. Normally we re-upload the whole file.

Lets say the file size is so big (1 MB) (Just assumption)

Is there a way to upload the changes only?

i.e. the difference between two files in local machine and remote server is just one character. So is it possible somehow to add a new feature to the client and server to understand this changes.

I can't propose a mechanism to achieve this feature; its only an idea that comes to my mind and personally it makes sense. But don't know much about possible technology implementation.

If this if to be implemented; I think needs changes to client application and server application to adapt.

I am not sure if this is valid; but I guess this needs artificial inelegance technology.

If to be implemented; this will amazingly reduce ftp traffic for single user having lots of files of type of PHP in our example.

Can't be sure this would work for binary files; but at least can you consider my idea for ASCI files?

B) In normal routine, when I need to upload a big number of different files. I zip them into one and single archive.

Upload to server. Then from the server panel, I unzip.

This so much reduce upload time.

So, technically; is it possible to let ftp client zip files before upload, then at server side, the ftp server will unzip in the same folder structure.

Do you think this could be two good ideas?

Do you think this (if valid) would reduce the whole internet ftp traffic; said that I guess 1000s or more developers using ftp daily to upload data?

Your feedback and input in my ideas so much appreciated.

Thank you so much

Regards

Note: Dose this trac have voting system for the ideas? Can't find it?

Hello,

FileZilla can't log in to server. Log in failed, because FileZilla have a big bugs. We have try with 6 Servers and with another FTP Client. Only FileZille Client is not works....

after installing 3.29.0 version I could not connect to the server. I even tried going back to previous version but connection cannot be re-established anymore.

Hello guys,

This week I started having access problem with my FileZilla where it showed me a network error message (​https://screenshot.net/pt/dn369an). I have checked my server access data several times and they are correct. Check my direct access to the server and they are accessing normally. It only started giving trouble when trying to access via FileZilla.

Now, it just not show any more messages (​https://drive.google.com/file/d/0B-3bBaQBNJ0mV2Q3RUJlenFGT3U3Z2tFaHdfd3pINmlzRDdV/view). I try to access, just as I always did, but nothing happens.

Please, could you help me?

Appreciate, Rodrigo Carlos

I love Filezilla and till this latest version it has been excellent at downloading multiple files (for me it downloads 2 simultaneously) and while doing so maxing the bandwidth and splitting it pretty much evenly between the files.

This latest version seems to occasionally (say 5 out of every 10 loads of the program) either (1) pick up only a fraction of the available bandwidth for single file downloads, and/or (2) allocate the bandwidth unevenly between multiple files, e.g. 1 will get 300-600 KiB/s with the second getting 4.1MiB/s.

The workaround for the above is to right click on one of the downloading files, and uncheck 'Process Queue'. If I then wait for like 10 secs, the bandwidth seems to be allocated correctly (2.1MiB/s to each file).

NOTE: this has happened over several days, and after restarts of both the FTP server supplying the files, the modem, and computer running Filezilla. I did not notice it in previous versions. It therefore seems like it could be some kind of low priority issue.

Thanks for a great product and for any help with this issue.

If you try to use the mouse to drag a rectangular selection box around files listed in either the local or remote file list panes, the mouse cursor jumps to the bottom right corner of the screen.

This seems to happen only when the horizontal scroll bar is visible.

Start your selection in the blank space below the listed files.

If you do not change the position of the scroll bars after your mouse cursor jumps, you may be able to try again and successfully drag a selection around the files.

I am not able use filezila last few days..this error coming when i am using other laptop this fttp runing but in my laptop not runing

Hello,

This error message appears when i try to add a file on my filezilla :

Status: Connecting to 213.186.33.206:21... Status: Connection established, waiting for welcome message... Status: Insecure server, it does not support FTP over TLS. Status: Logged in Status: Creating directory '/www2/camille-seewald/wp-content/uploads/2018'... Command: CWD /www2/camille-seewald/wp-content/uploads Response: 250 OK. Current directory is /www2/camille-seewald/wp-content/uploads Command: MKD 2018 Response: 550 Can't create directory: Disk quota exceeded

But i don't have a lot of files on my disk... So i don't understand. Can you please explain me how to fix that ?

Thank you and sorry for my bad english.

Camille Seewald

Desconectado do servidor Estado: Postergando a conexão por 5 segundos devido à falha na tentativa anterior... Estado: A resolver o endereço de ftp.wdp.com.br Estado: Conectando 67.23.244.40:21... Estado: Conexão estabelecida, esperando mensagem de boas-vindas... Estado: A iniciar o TLS... Estado: Verificando certificado... Estado: Conexão TLS estabelecida. Comando: USER wdp Resposta: 331 User wdp OK. Password required Comando: PASS Resposta: 530 Login authentication failed Erro: Erro crítico: Não foi possível conectar ao servidor

Hi,

The remote search suddenly stopped working even after we updated FileZilla to the latest version, please check asap.

Thank you.

Can save save/transver all files from your client to the server except .taccess files never have this issues before and using you from years.... is your quality and support will change in microsoft?

Good Morning FileZilla team,

I am contacting you on behalf of Amcrest (​http://amcrest.com/) support team and in order to request a feature to be added to your FileZilla Server.

We would like to ask for FileZilla server to allow the client (in this case a surveillance camera) to retrieve server file structure and capacity from any type of disconnection recovery.

Please let me know if you have any further inquiry regarding this request.

Best Regards,

Hugo

Good day! Please help, can not log in under ih88021, maybe someone changed the password? With respect to Michael.

Sometimes mousecursor jumps in local fileexplorer window when try to mark multiple files/folders.

I click for drag and then the cursor jumps (while having markingbox) to the rightdown corner, like his position is set to infinity in mouseMoveEvent.

This doesn't happen if there are allready marked items.

(feels like 2 events compete at mouseevent)

special: I have a 2 monitor setup where my primary monitor is the left one, and the secondary monitor is the right one. On the logical site the left monitor is on the left site (So when I leave my primary(right) monitor on the left site I enter the left monitor).

On devrais pouvoir afficher les fenêtres en liste et multi colones.

Comme dans l'image join

The "Remember Passwords" dialog box, which asks you if you want to save passwords with a master password or not at all, has the word "reconnnect" which should be "reconnect." See below:

the first file you create after opening FileZilla has the correct timestamp -- any additional files you may create will have the same timestamp as the first file you created. this issue does not apply when directories are created. i first noticed this issue today when a new file i created showed as being several hours old -- at first i thought maybe the server time zone was wrong, or that the FileZilla time zone offset was wrong, but i eventually determined the timestamp was based upon the first created file.

presumably this is due to FileZilla creating a single file and then reusing it, but it seems like a simple way to improve this would be just to "touch" the file to update it's timestamp before uploading it.

Hi Guys,

When I download the latest release of FileZilla Client for Mac, I get an error message displaying that it is not supported on this type of mac and the file might be corrupted. I'm on macOS Mojave. Any idea why? It was displaying the same error message before I upgrade to Mojave. I use FileZilla most of my time so it is kind of critical for me not to have access to it atm..

Thanks and take care! :)

Hello! I found a critical bug. I was found all my passwords in <USERDIR>/AppDataRoaming/FileZilla/recentservers.xml encrypted in Base64. I think, you should fix it, there is a big security risk!

Hallo zusammen,

seit dem 15.03. können wir uns auf unserem FTP Server nicht mehr anmelden und erhalten immer folgende Fehlermedlung:

Server sendete eine zusätzliche Login-Aufforderung. Sie müssen den Login-Typ 'interaktiv' verwenden. Fehler: Kritischer Fehler: Herstellen der Verbindung zum Server fehlgeschlagen

FileZilla FTP Client

Currently when I am uploading a large file, FZ server seems to spin up the drive, load one chunk/packet into memory, close the file, upload the file and then repeat. It does this a 2~3 times a second until the file is finished uploading (perhaps several hours later). This is a waste of power and needlessly wears the drive (in the case of a physical drive).

I would love if you could buffer significantly more (many megabytes) into memory to avoid this.

But... obviously pretty low priority given that it sounds difficult to code for the amount of visible payoff. Think of it as helping the environment? For my case use alone it could allow at least one drive to be turned off/spun down several more hours a day.

Attempting to connect to update.filezilla-project.org is failing due to HSTS and the server using a self-signed certificate rather than a public CA or Let's Encrypt.

Testing the URL: ​https://update.filezilla-project.org with online certificate checkers report errors. Missing intermediate certificate seems to be the problem. Chain ends at filezilla-project.org which is not a valid Root CA.

This problem has been reported with bug #11934 and rejected. I have tested this at multiple sites and ​https://update.filezilla-project.org always fails to load. Mostly tested with Chrome or Firefox on macOS.

I'm try updating manually to new version 3.43.0, always work it, but didn't work it now, problems with libc6(GLIBC), I'm using Linux Mint 19 x64, now warning "libc6 not found", but have version 2.27, but not working, I did a rollback to 3.42.1 and is working again. What is the solution, please?

I use FileZilla for uploading managing and files and folders in multiple sites on my laptop for multiple clients.

Sometimes I leave my laptop at hotel or a coffee shop, etc

I am suggesting to add an option to ask for password if FileZilla is inactive for certain time like 30 minutes. Admins can change or de-activate it at any time.

Also, it would be good to add different access level for file and folder management & access like allowing multiple users accessing a site, yet each person only can access and manage certain file and folders. It would be a great security resource for larger projects.

Thx,

Matt

Ik open het programma en meld dat er een update is. Ik klik op upgrade en hij download juist. Echter bij het installeren loopt het fout omdat een bestand nog in gebruik is van een programma. Begrijpelijk want het programma was nog niet volledig verdwenen.(melding cont..., abord,ingore) Bij het heropenen van het programma werd hij geuninstalleert en even later had ik een directory met niets in . Bij het aanklikken van het uitvoerbaar bestand van de nieuwe versie werd deze juist geinstalleert.

mvg Lieven

HOW TO SOLVE THIS

​https://i.imgur.com/HcshOFf.png

hi im trying to transfer a DLL to my server and it keeps saying access deniaed and what the help from the place i got the dll from says i gotta get the server to add it for me ? can i get some help pls also i cant do it becasue im on windows?

Al iniciar una transmisión a mi servidor habitual mediante FileFilla, me ha solicitado la actualización y después de actualizarla, ya no me permite acceder a mi servidor. Adjunto captura pantalla.

With versions newer then 3.47.1 i.e. 3.48 or 3.48.1-rc1 I cannot connect anymore to my cloud server using SFTP. Here is an extract from the logfile:

Version 3.48 with Error

2020-05-14 15:29:14 19688 1 Status: Verbinde mit SERVER.XX... 2020-05-14 15:29:14 19688 1 Antwort: fzSftp started, protocol_version=9 2020-05-14 15:29:14 19688 1 Befehl: open "USER@…" 22 2020-05-14 15:29:14 19688 1 Status: Using username "USER". 2020-05-14 15:29:14 19688 1 Befehl: Pass: 2020-05-14 15:29:14 19688 1 Status: Access denied 2020-05-14 15:29:14 19688 1 Fehler: FATAL ERROR: No supported authentication methods available (server sent: publickey) 2020-05-14 15:29:14 19688 1 Fehler: Herstellen der Verbindung zum Server fehlgeschlagen

Version 3.47.1 working

2020-05-14 15:25:27 9536 1 Status: Verbinde mit SERVER.XX... 2020-05-14 15:25:28 9536 1 Antwort: fzSftp started, protocol_version=9 2020-05-14 15:25:28 9536 1 Befehl: open "USER@…" 22 2020-05-14 15:25:28 9536 1 Befehl: Pass: 2020-05-14 15:25:28 9536 1 Status: Connected to SERVER.XX

So working with the older version works. So does switching to FTPS.

Thank you for your support and for providing FileZilla.

J.Polster

Tengo un servidor de minecraft de Box To play. La app de FileZilla me da un error:Error: No se pudo conectar al servidor Estado: Esperando para reintentar... Lleva 1h para reintentar. ¿Que puedo hacer para que funcione?

i have used win10 with latest ver (19041.388). when i download latest ver. filezilla, my system detect virus. so please solve this issue thanks.

screenshot ​https://prnt.sc/toedvk

FileZile updated to the lates version 3.49.1.

For that the installer was downloaded to the downloads folder, file FileZilla_3.49.1_win64-setup.exe and was installed without problems.

In the same folder remained the previous installers FileZilla_3.48.1_win64-setup.exe, FileZilla_3.48.0_win64-setup.exe and FileZilla_3.47.2.1_win64-setup.exe

The anti-malware software mention in the summary Malwarebytes 4.1.0, flagged the installer file FileZilla_3.49.1_win64-setup.exe and only this one as Malware

Gide lines and reasons why this may happend are explaned in this post on the Malwarebytes forum:

​https://forums.malwarebytes.com/topic/238670-machinelearninganomalous-detections-and-explanation/

It seems that something has changed in the installer or the Malwarebytes software. In any case I considered necessary to inform about the issue.

Received "You do not have permission to list this directory" when in fact Filezilla Client was given Full Disk Access and Full Folder Access in the Preferences.

Dear Team,

I am trying to login FileZilla it is not working before it is working fine ,Last 3 days an word's it is not working .Please help on this is ASAP.

Thanks & Regards, Subba Reddy.P 8184999469

You still have Virus infected versions on your servers. Please remove them as my favorite Mac updating app will not allow FileZilla to be checked for updates as you've been known to distribute malware in the downloads. These infected downloads are still present on your servers.

When

• server contains a file with contents "abc"
• client contains a file with contents "bac"
• files have the same size
• files have same date
• files have different time

Then

• the directory comparison view shows no difference (no colored line).

Trojans are being identified in your FileZilla_3.53.0_win64_sponsored-setup.exe software, can you understand why?

Hello dear,

I have a bug with FileZilla PRO on MacBook Pro 2019! I can't maximize the application!

Tell me, How to solve the problem?

Hello, it is currently version 3.54.1 of filezilla, 7429 days since initial release. I have read about 50 changelogs and none of them have contained "added confirmation for drag and drop" meaning that I still have to use WinSCP (yuck), please add this as soon as possible (thousands of people have been asking for drag and drop confirmation for decades as they don't like to destroy their server with the accidental flick of a mouse cursor)

You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:

a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.

Modidying Filezilla to create Filezilla Pro and adding features and then charging a required subscription fee violates the terms of the GPL license.

Hello, my Client got an Problem where she couldnt log in in our FTP Server it worked before but now she only gets the error Failed to connect to the server, on other PCs it worked but for her not. Is it maybe because she is using a vpn to connect to our Server and using wlan that it is too slow.

best regards Adrian Reider

I downloaded and installed the update, 3.57.0. Now it will not connect when I enter command-R. Says TLS connection is established, enters the password (which has not changed), then times out. I restarted, but with same problem. Other FTP software works just fine. Only change is the new FileZilla.

Hello , if i am downloading just new files only from a server , and if there is old files exist in my local folder , i only need to see the status of the files that been skipped , i can see the logs up there but its too fast to track

on the transfer queue section i see

SEVER/LOCAL FILE - SIZE - DIRECTION - REMOTE FILE - SIZE - PRIORITY - TIME

I just need to see a new column shows the status of the new files that was processed last , downloaded or skipped

thank you

On the logging settings panel (see screen capture) there is a browse button. I assumed this would open the folder specified - ie my windows temporary folder. However, clicking BROWSE opens a folder to which I had recently exported a site definition, not the folder containing the logs.

This is not a serious problem as I was able to browse to the appropriate folder, and then view the logs, but that does take a little time! If I correctly understood the way this is supposed to work it would be nice to have it fixed.

In windows 11, I have enabled Windows's Long Path and having a LONG PATH enabled ftp server, when using FileZilla Client, somehow the file is not uploaded into intended long path dir, the maximum length of the dir that i can upload a file into is around below 1.024 characters.

So for example I am uploading a file into a dir in the ftp server which having length of 1.822 characters, filezilla client will cut off the directory and will uploaded it into below 1.024 characters length directory, instead of in the 1.822 character length directory.

How to overcome the 1.024 character length directory into 32.767 character length (​https://docs.microsoft.com/en-us/windows/win32/fileio/maximum-file-path-limitation?tabs=cmd), 32.767 is the new maximum total characters path length .

When in a directory on the server side, highlighting a file and choosing "Delete" from the dropdown menu, the confirmation dialog box does not place focus on the default button "Yes".

Hello,

Since version 1.5.1, the "ls -l" command no longer works. We have a program that uses the "ls -l" command to list files with creation date information. Can you correct this please? Do you need additional information?

Best regards,

we need FTP server with more secured and various user level permissions, we require a below options.

1. SSL certificate should work
2. encrypted transmission
3. Read and write permissions are available in your server, but we need to restrict the user to modify, rename, delete and overwrite the files
4. different parent folder for each users.
5. will it works on Linux - it is not mandatory
6. any limitations for daily uploads / download- clarify.

If the above options are available with FileZilla enterprise, we are okay to purchase it. Do you have the trial version for the enterprise server?

Since last week, one of my customer cannot connect to FileZilla server. Keep in mind that it was working before.

One of her colleague is able to connect to the server on the same network and I can connect with her account on another network.

In the window, it says:

AUTH TLS 502 - Auth command is not supported. 502 - Please contact your network administrtator to enable FTPS service

What cause this issue?

Seems like I'll have to upload the attachments afterwards.

I have uploaded a bunch of files to a server, with unicode characters in the file names.

I'll attach a screenshot of how such characters look like in fileziulla in the server panel.

For comparison, I'll attach a screenshot of a terminal where I'm connected via SSH to the very same server and I've run a "ls" command: you can see the unicode characters properly rendered in the output.

Hi team,

I have my version to not to check for updates, and yet everytime I start up FileZilla it tells me there is an update available.

I'm running FileZilla 3.62.2

We run it on computers that need admin access to update and so it's just an extra step each day to remove the pop up prompt.

Cheers, Steve

FileZilla Client

Version: 3.62.2

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2022-11-22 Compiled with: x86_64-w64-mingw32-gcc (GCC) 10-win32 20210110 Compiler flags: -O2 -g -Wall -Wextra -Wno-deprecated-copy -ffunction-sections -fdata-sections -Wno-cast-function-type

Linked against:

wxWidgets: 3.0.6 SQLite: 3.39.4 GnuTLS: 3.7.8

Operating system:

Name: Windows Server 2016 (build 17763), 64-bit edition Version: 10.0 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi bmi2 lm Settings dir: C:\Users\steve\AppData\Roaming\FileZilla\

Also affects filezilla 3.65.0.

Debian maintainer can easily reproduce this issue.

Debian bug: ​https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1043556

Report:

Filezilla crashes when you go to Settings -> Transfers -> FTP: File Types -> Treat the following filetypes as ASCII files. And then remove all the filetypes except one from the list, and then click the last filetype.

Video showing the crash attached.

Backtrace attached.

Settings checkbox for "Display momentary transfer speed..." indicates opposite of its value.

In Settings, under Interface, in the box headed "Transfer Queue," the checkbox for "Display momentary transfer speed instead of average speed" actually toggles the opposite of what it states (ie, it shows momentary speed when unchecked, and average speed when it is checked).

This is a legacy bug that has been around for quite some time. This bug does not affect functionality, so marked as low priority.

Dear good morning, for some time it is impossible for me to see the download of files from the server to the local folder tree. Im use Windows 7

Steps to reproduce:

• Run FileZilla
• Connect to an FTP server
• Upload anything (now systray icon appears)
• Exit FileZilla

Ooops... icon in systray stil exists and disappears only after hovering mouse over it. Taskmon shows that FileZilla already unloaded and not running.

It starts after upgrading to 3.65.0 (from 3.64.x I suppose) and still exists on 3.66.1.

In Italian I get the "Errore di sintassi - Impossibile analizzare l'indirizzo del server: Nessun host fornito, inserisci un host." error (theoretically in English it would be similar to "Syntax error - Failed to parse server address: No host provided, please enter a host.") when I rename a file locally in FileZilla when a file with the same name already exists.

Then the message "Impossibile rinominare il file, Errore imprevisto, Se l'errore persiste, è possibile utilizzare il codice errore per cercare ulteriori informazioni sul problema. Errore 0x80070057: Parametro non corretto.". In English it should be something like: "Failed to rename file, Unexpected error" also appears. If the error persists, you can use the error code to look for more information about the problem. Error 0x80070057: Incorrect parameter."

In my opinion it would be enough to warn that a file with the same name already exists.