Custom Query (10423 matches)

I ran FileZilla_3.1.3.1_win32-setup(2).exe After that I try to start but get: "This application has failed to start because mingwm0.dll was not found. Re-installing the application may fix this problem"

I tried reinstalling but htis did not help. to continue my work asap: where can I get the old working install?

hello

I try to developpe an PHP interface to modify the FileZilla Server.xml file.

It work but my problem is that the server take care of my add only if y restart the server :/

are there a way to make CLI ? (DOS command ligne with the server) or a why to say to fileZilla server to take care of the modification made in the file ?

best regards telnes

when i have uploading my files to my free hosting to byethost..

then few sec later it crashes when it delays with incorrect i.p address on windows vista...

i have put in the correct info to open my free host ftp and it still crashes when it delays for a few secs...

Response: 421 Too many connections (2) from this IP Error: Could not connect to server Status: Delaying connection due to previously failed connection attempt...

See png! Bye.

When you scroll with the mouse in the "Queued Files" transfer window, the graphic bar (green percentage thing) doesn't scroll properly, and it sort of screws things up.

I'm on filezilla 3.1.2 (using the ubuntu package from the repository).

I log into open account and then CWD to the hidden folder by entering a custom command. I then try to list the files in the folder using the LIST custom command and receive the error: 425 Can't open data connection. The log follows:

............ Command: USER ThisIsUN Response: 331 Password required for ThisIsUN. Command: PASS Response: 230-Welcome Response: 230 User ThisIsUN logged in. Command: SYST Response: 215 Windows_NT Command: FEAT Response: 211-FEAT Response: SIZE Response: MDTM Response: 211 END Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/ThisIsUN" is current directory. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (<removed by user for bug report submission>). Command: LIST Response: 125 Data connection already open; Transfer starting. Response: 226 Transfer complete. Command: PASV Response: 227 Entering Passive Mode (<removed by user for bug report submission>). Command: LIST -a Response: 125 Data connection already open; Transfer starting. Response: 226 Transfer complete. Status: Directory listing successful Command: CWD HiddenDir Response: 250 CWD command successful. Command: PWD Response: 257 "/ThisIsUN/HiddenDir" is current directory. Command: LIST -a Response: 150 Opening BINARY mode data connection for /bin/ls. Response: 425 Can't open data connection.

I use Windows XP Professional and FileZilla 3.1.3.1 (Build 29-Sep-2008)

I'm using Filezilla Client 3.1.3.1 (barely updated) on OS X Leopard (updated). I'having the following error: if I try to upload a file from a local folder to the remote folder and I drag from the local folder of filezilla to the remote folder of filezilla it takes a lot of time to release the file in the new folder and start the download. I didn't have this error before with the previous version. Drag & drop ( I mean inside Filezilla ) it's not working properly...it works actually but I have to double click somewhere in the remote folder to drop the file and start the tranfert...that's weird!! I hope my english wasn't that bad, I'm italian. If you need more info about that please contact me here: luca@… I'm a web developer and I would like to help as much as I can...

Steps to reproduce:

1. Right-click a file, and click "View / Edit".
2. Open the menu File -> Show files currently being edited...
3. Click on the file we had selected for editing before, and click "Upload and unedit".

Note that the file remains in the status "Uploading..." and is never removed from the list. If I close the dialog and attempt to re-open it, FileZilla tells me there are no files to edit.

It should instead remove the file from the list, and, if I shouldn't have the dialog open when there are no more files to edit, it should pop the same alert as when I tried to open the dialog when no files were being edited.

I set this to low priority because FileZilla does not crash, and it's hard, if not impossible, to actually crash it through this bug. I also set it to Windows, but it may apply to other operating systems as well.

Steps to reproduce:

1. Right-click a file, and click "View / Edit".
2. Open the menu File -> Show files currently being edited...
3. Click on the file we had selected for editing before, and click "Upload and unedit".

Note that the file remains in the status "Uploading..." and is never removed from the list. If I close the dialog and attempt to re-open it, FileZilla tells me there are no files to edit.

It should instead remove the file from the list, and, if I shouldn't have the dialog open when there are no more files to edit, it should pop the same alert as when I tried to open the dialog when no files were being edited.

I set this to low priority because FileZilla does not crash, and it's hard, if not impossible, to actually crash it through this bug. I also set it to Windows, but it may apply to other operating systems as well.

FZ fails to list the remote directory. FZ version is v3.1.4.1, server: ServU v6.1 on WinXP SP3. See attached log, plus a log of another ftp client that works.

FZ fails to list the remote directory. FZ version is v3.1.4.1, server: ServU v6.1 on WinXP SP3. See attached log, plus a log of another ftp client that works. (The error is probably cased by the ASCII listing mode - I'm no programmer, I just compared the logs)

Hello,

I'm using filezilla, and there's something I'd like to see be corrected.

Indeed, when I'm connected to a FTP, and enter a folder, at the 1st time, the folder is listed (LIST), but when I already visited this folder, and go back into this one, the file list is no longer listed, whereas the content has changed !

I take a look into options but found no solutions !

I used latest version of Filezilla client, but i have found one problem in my one website where login connection is established but stop in file directory listing and shows error like "Failed to retrieve directory listing". I tried to passive mode, and also tried to set 21 port. but could not success. But when i tried to connect with another software ws_ftp_pro, i could connect. Why i can not connect with filezilla ?

System: Intel P4, Windows XP SP3

FileZilla Client: Version: 3.1.5 Compiled for: i586-pc-mingw32msvc Build date: 2008-10-22

Issue: FileZilla crashes when using "Clear private data..." function.

Steps to reproduce:

1. Install FileZilla client 3.1.5 (fresh install)
2. Run FileZilla client
3. Go to menu Edit => "Clear private data..."
4. Click OK button
5. If no debugger is running, FileZilla quits immediately

Note: Bug has been noticed in version 3.1.4.1, but previous versions of FileZilla client might be affected as well.

I have many files on my ftp server that filezilla can "see" but when I want to either erase them, back them up, or rename them, I get the error message that the files do not exist. (550 Sorry, but that file doesn't exist) When I first try to highlight the file, the space does not show up at all. I only realized there was a space before the file name when I used the program ws_ftp professional. When I renamed the file by taking out the space, it worked on ws_ftp professional and I was able to then access the file with filezilla.

FZ Server 0.9.27 beta Error message: 425 Can't open data connection

This is occuring only with users who upgrade to 3.1.5 client.

Before upgrading they were using 3.1.3.1 without any problems.

Users are using "Servertype FTPS - FTP over implicit TSL/SSL" connections.

I receive new version notifications without problem.

The download fails when Filezilla tries to connect to sourceforge servers. The CPU usage increase up to 99% and filezilla freeze. I need to close it with CTRL+ALT+DEL and kill the process.

I tried several times during the day. Always the same freeze.

Dear Sir,

i have heard that file zila is a very good solution for ftp. i have download the server but i dont understand how to install and how to configure the same, i would appreciate if you can tell me the guidelines of installation and configuration. I have also tried to download the documents from the site but i am unable to find it. i have installed the same but i need more help in config.

your prompt reply will by highly appreciated.

Regards, Abbas

Often you upload a file and then want to post the link to the world. Currently this is just annoying. Would be creat if it was possible to define a web adress to the host like ​http://www.example.org/ and then get the correct file link by right clicking.

Smartftp has this pretty nice.

I have a dedicated machine to upload and download . I used to connect it through remote desktop win xp inbuilt feature.

Machine get out of network for few seconds when we start uploading/downloding

it continue to hapenn again and again. and we cannot upload and download.

I can login to ComCast but it flatly refuses to "LIST" the files. Maybe an active/passive issue. FZ 3.1.5.1 I had the same problem with 3.1.1.1 WS_FTP_LE, NotePad++, FireFox FTP work fine. This only is a problem FTPing to/from ComCast. This is a FZ issue, other FTP clients work fine. I can use FZ to contact GoDaddy and 1and1 with no problem.

Status: Resolving address of upload.comcast.net Status: Connecting to 216.87.188.9:21... Status: Connection established, waiting for welcome message... Response: 220 FTP server (Version 5.339PWS/AI) ready. Command: USER jraff Response: 331 Password required for jraff. Command: PASS * Response: 230 User jraff logged in. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current directory. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (216,87,188,9,168,5) Command: LIST Response: 150 Opening BINARY mode data connection for /bin/ls. Response: 426 Data connection: No child processes. Error: Failed to retrieve directory listing

All the info to connect to site is verifiably correct, hoever the site kicks back the following (highlighted in bold):

Response: 220 207.57.2.35 FTP server ready Command: USER Benning Response: 331 Password required for Benning. Command: PASS Response: 530 Login incorrect. Error: Could not connect to server

Could not load c:/users/me/appdata/roaming/filezilla/filezilla.xml, make sure the file is valid, fot this session default settings will be used and any cahnges to the settings are not persistent

annoying...had it happen on my previous install as well.

I rely on being able to see the network drive through FileZilla and have had no problems whilst using 3.1.3 I have had to downgrade back to this version. A few of my colleagues who use the same ftp as myself have also reported this same issue.

The download of files from each size stops at 100%. newest filezilla version installed. i can reproduce it when i download several files. the filesize is random so there is no difference between 100MB or 1GB files. starting and stopping the downloads wont fix it. i need to stop the download, restart filezilla and restart the download. then it will run again. there is no difference if i run filezilla in admin mode or as invoker. nothing to see from the log. at the server side there is a FTP Publishing Service 6.0 running on windows 2k3 server. if you need some additional infos contact me at reli(a)relicted.com

Is it possible to tweak filezilla a little to send out Email notifications every time the status of any task has changed? Such as – upload or download tasks have successfully gone through or a failure notice which will need our attention right away.

Thanks.

Hi.

FileZilla Client 3.1.6 in MacOS X 10.5.4 has exactly the same problem here. See Log of filezilla below.

NOTE: same behaviour as Bugreport #4021

Note: OS X set to no firewalls - no security software Mac connected through router to internet router has hardware-firewall, but no port-adress-translation or filters operating.

HINT: Macbay Host tested with Filezilla and had no problems. Filezilla will connect without TLS/SSL Cyberduck and Captain FTP connect without problems Status: Filezilla currently not usable

LOG:

Status: Auflösen der IP-Adresse für ftp.macbay.de Status: Verbinde mit 193.164.134.194:21... Status: Verbindung hergestellt, warte auf Willkommensnachricht... Antwort: 220 193.164.134.194 FTP server ready Befehl: AUTH TLS Antwort: 234 AUTH TLS successful Status: Initialisiere TLS... Status: Überprüfe Zertifikat... Befehl: USER PL12813 Status: TLS/SSL-Verbindung hergestellt. Antwort: 331 Password required for PL12813 Befehl: PASS Antwort: 230 User PL12813 logged in Befehl: SYST Antwort: 215 UNIX Type: L8 Befehl: FEAT Antwort: 211-Features: Antwort: LANG en Antwort: MDTM Antwort: UTF8 Antwort: AUTH TLS Antwort: PBSZ Antwort: PROT Antwort: REST STREAM Antwort: SIZE Antwort: 211 End Befehl: OPTS UTF8 ON Antwort: 501 OPTS: UTF8 not understood Befehl: PBSZ 0 Antwort: 200 PBSZ 0 successful Befehl: PROT P Antwort: 200 Protection set to Private Status: Verbunden Status: Empfange Verzeichnisinhalt... Befehl: PWD Antwort: 257 "/" is the current directory Befehl: TYPE I Antwort: 200 Type set to I Befehl: PASV Antwort: 227 Entering Passive Mode (193,164,134,194,237,83). Befehl: LIST Antwort: 150 Opening ASCII mode data connection for file list Status: Server hat die TLS-Verbindung nicht ordnungsgemäß geschlossen Fehler: Could not read from transfer socket: ECONNABORTED - Connection aborted Antwort: 226 Transfer complete Fehler: Verzeichnisinhalt konnte nicht empfangen werden Antwort: 421 Idle timeout (250 seconds): closing control connection Status: Server hat die TLS-Verbindung nicht ordnungsgemäß geschlossen Fehler: Konnte vom Socket nicht lesen: ECONNABORTED - Connection aborted Fehler: Verbindung zum Server getrennt

When trying to launch filezilla an error message appears on the console " 2008-12-21 11:00:22.736 CrashSubmitter[390] Crash report submitted! dyld: /Applications/Firefox.app/Contents/MacOS/firefox-bin Undefined symbols: /Applications/Firefox.app/Contents/MacOS/XUL undefined reference to _kCGColorSpaceGenericRGB expected to be defined in Carbon /Applications/Firefox.app/Contents/MacOS/XUL undefined reference to _kCGImageSourceShouldAllowFloat expected to be defined in Carbon /Applications/Firefox.app/Contents/MacOS/XUL undefined reference to _kCGImageSourceTypeIdentifierHint expected to be defined in Carbon"

When accessing the directory on the terminal this message appears " The kernel support for the dynamic linker is not present to run this program." 'dyld_mod_term_funcs^@@^{@dyld_make_delayed_module_initializer_calls}@^@@^{@Couldn't calculate the application directory.}@^@@application.ini^{@XUL_APP_FILE}@^@@^{@Invalid path found: '%s'}@^@@^@app@Incorrect number of arguments passed to -app^@@^@@application.ini path not recognized: '%s'^@@^{@XUL_APP_FILE=%s}@Couldn't read application.ini^@@^@~K\$?'

I get this error while connecting to several (not all) servers in Dutch:

Fout: Kan niet lezen van socket: ECONNRESET - Connection reset by peer Fout: Verbinding verbroken met server Fout: Ontvangen van mappenlijst is mislukt

Translation:

Error: Can't read from socket: ECONNRESET - Connection reset by peer Error: Connection with server disconnected Error: List receive fail

Client version: 3.1.6

FileZilla version is 3.1.6, build date 12/2/08

After logging in to a VM system and displaying a file directory, the detail list of files in the remote system's directory is incomplete.

It appears that the names of native files (EBCDIC) don't display. Names of ASCII text files do display.

No filters are in use (none are set up).

We know that this is a FileZilla problem, not a permissions or other issue, because we can view all of the files using a commercial product called WS_FTP which is similar to FileZilla. Our intent is to use FileZilla to perform binary downloads of data files from the mainframe to our network.

The FTP connection is accomplished through a Cisco VPN. ZoneAlarm firewall is running on our client Windows 2000 PC (ZoneAlarm is required by the host).

Several users had requested to have the mapped network drivers [like Y:] display the whole volum labe in the Local folder window and not just the letter [y:(data) ] or have an option to swith the local folder path to UNC standart

Hello,

the old FileZilla 2 Client had a nice feature: when some files (e.g. files 45-50) were selected in a local folder and then another local folder was selected, the files at the same place in the new local folder (e.g. files 45-50) were automatically selected again. Would it be possible to reintroduce this feature or even make it switchable in the options? Thanks.

Martin

Status: Listing directory /backup/Pictures Status: Directory listing successful Status: Disconnected from server Status: Retrieving directory listing... Command: cd "Lottery" Error: did not receive a valid SFTP packet: sftp_recvdata failed, could not reveive packet length Error: Failed to retrieve directory listing

Should be receive.

The connection sat idle for a while and then was Disconnected from server. I tried to change directories and this misspelled error was printed.

I point to this ​forum post. This feature is very useful (not only for me). Also filezilla will be on of the first free ftp-server for windows with this feature.

Version 3.2.0 Windows XP 64-bit w/SP2

Each time on startup I get the "Operating system problem detected" message. This is very annoying. It should only appear the first time I run the program from a new install. After that it should not appear anymore.

At least add a check box to "Do not show this again."

Started filezilla, it said there is an update --> I updated as i ALWAYS do.( first install/upgrade option ) Started filezilla --> first error when clicking sitemanager: cannot open sitemanager.xml .... no changes will be ...

Then tried to import my filezilla.xml --> same error but then it says: import done , after restart ... I restart but that did not made any difference.

Think for more than one & 1/2 year it was running fine , update after update but now looks like I will have to insert all sites again becuase right now I cannot even ADD any site for it keeps returning the first error: cannot open ...

I run XP PRO XP3.

it should just wait, instead it fails and says password error

you can test it on my hosting account:

ftp: ftp.servage.net user: site1test password: test12341234

Command: PASV Response: 220 FTP Server # 1 Command: USER site1 Response: 227 Entering Passive Mode (77,232,67,104,245,60). Command: STOR Console_TestListener.php Response: 331 Password required for site1 Command: PASS Response: 530 Sorry, the maximum number of clients (5) from your host are already connected. Error: Could not connect to server Status: Resolving address of ftp.site1.co.il Status: Connecting to 77.232.67.104:21... Response: 150 Opening BINARY mode data connection for Console_TestListener.php Status: Connection established, waiting for welcome message... Response: 220 FTP Server # 1 Command: USER site1 Response: 226 Transfer complete Status: File transfer successful Response: 331 Password required for site1

Hello, I've been using FileZilla for a long time now, and I love it and recommend it to all of my friends, so first off, great job! I appreciate the work you've put into FileZilla!

Just a little thing here - when I download several large files at once, typically, the file queue fills up to the point that I have to scroll, and I want to keep tabs on the progress of the files being downloaded, so I grab the resize bar dividing it from the upper 3/4 of the program, and drag it up so more queued files can be seen, but the progress bars all disappear, and I can't see the progress of any of the files any more. I can get it back, I believe by starting a new series of downloads, but with big files, I like to know how long they'll take to download.

Thanks! Paul Duquesnoy

I can't see my remote or local files since I updated to version 3.20.

Thanks, Rebecca Beasley

when making the columns bigger the temp guide line doesnt disappear after you resize the columns. you can min/max the window to get rid of it tho.

Client 3.2.0 does not support Swedish characters åäö in path. Client report:

18:22:19 Command: RETR /srvmmxap001_e$/Home som Skall_Flyttas/1076/DOKUMENT/Bilder/Björk/PICT5534.JPG 18:22:19 Response: 550 /srvmmxap001_e$/Home som Skall_Flyttas/1076/DOKUMENT/Bilder/Björk/PICT5534.JPG: The system cannot find the path specified. 18:22:19 Error: Critical error 18:22:41 Status: Sending keep-alive command

The operating system was reset from XP home to XP Pro by the adaware program update - don't ask how - I have no idea, and neither does anyone else. BUT it reset all my accounts.

Filezilla was working wonderfully, but now I cannot connect.

The log is as follows

Connecting to probe.filezilla-project.org Response: 220 FZ router and firewall tester ready USER FileZilla Response: 331 Give any password. PASS 3.2.0 Response: 230 logged on. Checking for correct external IP address Retrieving external IP address from ​http://ip.filezilla-project.org/ip.php Checking for correct external IP address IP 81.20.183.83 ib-ca-bid-id Response: 200 OK PREP 1728 Response: 200 Using port 1728, data token 1895056417 PORT 81,20,183,83,6,192 Response: 200 PORT command successful LIST Response: 150 opening data connection

Please help as I have updates to load to a website

Hi,

I am using Filezilla to to transwer the files from my laptop to remote servers. The folder on my Laptop is the Check out copy of Subversion.I am using TortoiseSVN client to access the Subversion. When was right clicking on the folder on the Left pane of FileZilla to Update my local copy, I did not fild the TortoiseSVN commands in the right click context menu. If the FileZilla has the TortoiseSVN commands in its right click context menu, it helps us a lot to update Subversion local copy from the Filezilla client, which I found in winSCP.

Regards,

Shivaji

Filezilla Client version 3.2.0 Command button controls flicker sporadically on the macbook osx 10.5.5 / intel. This occurs throughout the application, even on the main page - the quickconnect button.

Under Edit -> Settings -> Security settings, there's a typo.

It says 'In this case only the the first three parts...'.

Of course, that's one 'the' too many.

Gentlement, For several days now, I have been writing several simple perl scripts, and using filezilla to upload these text files to my server, and I kept getting 'Configuration Error' when trying to run the scripts. I contacted my host tech support, and they could not find any reason as to why this error was occuring. This morning I created a simple example from an old perl book, using Notepad (windows XP of course), and uploaded it with Firefox FireFTP plugin, which shows the ASCII transfer mode, and the script worked. I have gone into filezilla Edit Settings, and under Transfers->File Types, set this to ASCII, but it does not seem to make a difference. When uploading a file to my host, it shows the transfer as Normal. FYI... My email is trebor0926@…, if you want to pass on info to me.

Program Version: 3.2 When I encounter some folders on the remote server that have some or all of the characters in Cyrillic, they are displayed by the fine, but as soon, as I click on it, the second folder gets created with the wrong charset. The program takes me to the wrong charset folder, while the folder that has normal Cyrillic characters doesn't disappear. When I try to click on the correct version, it sends me back to the folder duplicate with the wrong charset. I can see all of the files and folders inside of the wrong charset folder, but I cannot do anything with them, only look at them. It gives me an error if I try to download or view files, or browse nested folders. When I type the directory path in address bar - same thing happens.

The idle time is WAY to short, but to make it worse, there is no way for the user to change this. A very strange omission! Many people probably falsely assume that they can change the "time out" setting, but this is only for transfers, not idle time. Why not let the user adjust this? I am tired of, every 30 seconds, having to re-connect and navigate back to the subdirectory on the server before I can ftp a file again. Thanks for hearing my rant - and yes I kind of would call this a "bug" :-)

This is for version 3.2.0 (and the previosu one).

I recently ran into a problem with the latest version of FileZilla Server (0.9.30).

I use the 'Autoban' feature, which uses the default of 5 failed attempts and bans for 999 hours. One of my accounts had a problem where they were using the wrong password and their account was banned.

I went into the FileZilla Server interface and removed their IP from the filter list, however they were still blocked. I then clicked the lightening bolt icon to take the server offline and then put it back online. They were still banned.

I then went into the Windows Services and restarted the FileZilla Server service itself, which fixed the issue.

So, there is an underlying bug here, however even with that, shouldn't clicking the lightening bolt stop and start the service? (Right now it looks like there is another 'level' which doesn't need to be there.)

When attempting to open a folder on a remote sftp system, if the folder has a large number of files within, an error is generated and you do not get to review or navigate to that folder.

Below is the command list that is displayed.

Response: Current directory is: "/" Command: ls Status: Listing directory / Status: Calculating timezone offset of server... Command: mtime "AutomationTest" Response: 1233849901 Status: Timezone offsets: Server: -18001 seconds. Local: -18000 seconds. Difference: 1 seconds. Status: Directory listing successful Status: Retrieving directory listing... Command: cd "AutomationTest" Response: New directory is: "/AutomationTest" Command: ls Status: Listing directory /AutomationTest Error: No valid incoming packet found Error: Failed to retrieve directory listing

The folder in question can have upwards of some 5000 files at times.

No testing other than emptying the folder in question has been done to learn what that high limit might be.

Perhaps solution in this unusual case would be to only present partial list? or perhaps change to directory, but do not attempt to display entire contents?

If nothing else, being able to navigate to the folder at a minimum is important.

hi,

i want to change the permission of my files. but when i change it into chmod777 , the status describes that " 500 'SITE CHMOD 777 filename.php': command not understood "

due to this problem, i cannot upload any kind of forms and other files like poll system.

your help would be most appreciated.

In windows you can connect to multiple servers at the same time by running multiple instances/windows of filezilla, it is not possible to do this on a Mac.

I did not want to up date as I am in the middle of a huge project but after I said no to update the program locked up.

Ok so I did the u/d bam it doesn't work at all now freezes right up.

when I try to shut down the computer the send error and end program go into a tango together......

I'm not furious just very disappointed

please help NOW

i cant go up past the c: to my computer. so i can see all my drives.

I get the error message: Call-list.2009xls cannot be opened. The associated program(WX_DDE#"C:\Program Files\Microsoft Office\Office12\EXCEL.EXE"\e#Excel#systen#[open("Call_List_2009.xls")]) could not be found. Please check your file type associations.

Yikes! How do I get back to the last version? Can I delete this last update and go back to another version? Thank you for your help! Angie

Exporting the Filezilla.xml from the PC and importing it into Filezilla for Apple Mac crashes.

When a project is listed in the server manager, and has a local directory in PC format inserted (so let's say c:\projects\www.kfz.net ) and your are moving your data to the mac filezilla is crashing because he can not find the c: drive.

Maybe it make sense to check for PC drives and remove the entries and set them to empty when a user is importing the filezilla.xml on a mac.

Axel From ​http://www.kfz.net

Be able to right-click in the interface sections displaying server folders/files and be able to create a blank text file (or via some other quick-ish means).

Reason: As a developer I frequently find it annoying when I'm creating many new files for various things and I have to create/keep a blank file around on my computer and drag it onto the server every time I need one.

I get this error when I try to open my www folder on the server. Here are the details: Command: PWD Response: 257 "/www" is current directory. Command: CDUP Response: 250 CWD command successful. Command: PWD Response: 257 "/" is current directory. Status: Directory listing successful Status: Retrieving directory listing... Command: CWD /www Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (207,159,146,172,184,71). Command: LIST Response: 125 Data connection already open; Transfer starting. Error: Transfer connection interrupted: ECONNABORTED - Connection aborted Response: 550 .: An established connection was aborted by the software in your host machine. Error: Failed to retrieve directory listing

IF A: is empty (no floppy), the arrows cannot get you passed the floppy..

if possible, a blank listing or a default (C:\) list could appear instead.

Sorry, prefer keyboard programs, but can use mouse if necessary.

Great program!

Open Program, Tab to drive list, arrow down to A:, but gets returned to my computer instead. Pressing C or D don't allow you to jump past it either...

Not major. Thanks!

If the files in the remote site are zip files, Filezilla see them as directories and the file transfer is failed.

We exchanged today through my filezilla client with a trusty friend some data (video + audio video files the day before). We had both the password for this common server on my machine (he is in paris me in the south west of france, 2 different locations and machines), ready that we were to only use it for this exchange and re-configurate later the server. Unfortunately, when i deleted the whole files, it remained 2 in a "prefs" of the public_html: 550 Prohibited file name: .pureftpd-upload.49a01112.15.4127.1db34fbf and .pureftpd-upload.49a00928.15.1f63.841bf5d1, both cant be retrieved in anyways, match my whole hard disk when compared to the local server (which ever is selected); cannot delete or rename them. As well, trying to upload these files got me a critical error. DESPITE IT, WE HAD NO PB TRANSFEERING THE FILES ONE WAY OR THE OTHER (but is this procedure allowed? i doubt it ... now).

I would like to know: -if this procedure is allowed or forbidden -if i can change my password keeping the same host name on the local server -if these 2 files may harm or not the security of the exchanges (in normal conditions and in case i could change my password)

• if they could have been introduced here to hack voluntarly my server a3356674 hosted @ 216.108.235.38 (distant) or if it is just a consequence of a dysfunctional connexion and exchange;
• if i order to sharpen risks in the future i should prefer to open a new account (new host name)?

I should add that i can delete with no pb my other accounts, one being hosted at the same root, with the same name of server a3356674, presenting the same characteristic, and this one too (it was unchanged when i reinstall filezilla and reconnect my local server)

I ask you to forgive me for this way to practice filezilla (i know pass exchange is never a safe way), but were not very used to it and it was a pretty much emergent work, that finaly we success to provide in the deadlines, and with the only help of this very practical soft i wish to keep in my favourites...

list of event follows:

Statut: Connexion à 216.108.235.38:21... Statut: Connexion établie, attente du message d'accueil... Réponse: 220---------- Welcome to Pure-FTPd [TLS] ---------- Réponse: 220-You are user number 21 of 500 allowed. Réponse: 220-Local time is now 17:41. Server port: 21. Réponse: 220-This is a private system - No anonymous login Réponse: 220 You will be disconnected after 3 minutes of inactivity. Commande: USER a3356674 Réponse: 331 User a3356674 OK. Password required Commande: PASS Réponse: 230-User a3356674 has group access to: a3356674 Réponse: 230-OK. Current restricted directory is / Réponse: 230-51 files used (0%) - authorized: 6000 files Réponse: 230 428152 Kbytes used (27%) - authorized: 1536000 Kb Commande: SYST Réponse: 215 UNIX Type: L8 Commande: FEAT Réponse: 211-Extensions supported: Réponse: EPRT Réponse: IDLE Réponse: MDTM Réponse: SIZE Réponse: REST STREAM Réponse: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; Réponse: MLSD Réponse: ESTP Réponse: PASV Réponse: EPSV Réponse: SPSV Réponse: ESTA Réponse: AUTH TLS Réponse: PBSZ Réponse: PROT Réponse: 211 End. Statut: Connecté Statut: Récupération du contenu du dossier... Commande: PWD Réponse: 257 "/" is your current location Commande: TYPE I Réponse: 200 TYPE is now 8-bit binary Commande: PASV Réponse: 227 Entering Passive Mode (216,108,235,38,33,86) Commande: LIST Réponse: 150 Accepted data connection Réponse: 226-ASCII Réponse: 226-Options: -a -l Réponse: 226 7 matches total Commande: PASV Réponse: 227 Entering Passive Mode (216,108,235,38,7,130) Commande: LIST -a Réponse: 150 Accepted data connection Réponse: 226-ASCII Réponse: 226-Options: -a -l Réponse: 226 7 matches total Trace: Server seems to support LIST -a Statut: Calcul du décalage horaire du serveur... Commande: MDTM .ftpquota Réponse: 213 20090304195736 Statut: Décalage du fuseau horaire : Serveur : -28800 secondes, Local : 0 secondes. Différence : 28800 secondes. Statut: Succès de la lecture du contenu du dossier Statut: Récupération du contenu du dossier... Commande: CWD public_html Réponse: 250 OK. Current directory is /public_html Commande: PWD Réponse: 257 "/public_html" is your current location Commande: PASV Réponse: 227 Entering Passive Mode (216,108,235,38,130,228) Commande: LIST -a Réponse: 150 Accepted data connection Réponse: 226-ASCII Réponse: 226-Options: -a -l Réponse: 226 3 matches total Statut: Succès de la lecture du contenu du dossier Statut: Récupération du contenu du dossier... Commande: CWD public_html Réponse: 250 OK. Current directory is /public_html/public_html Commande: PWD Réponse: 257 "/public_html/public_html" is your current location Commande: PASV Réponse: 227 Entering Passive Mode (216,108,235,38,180,61) Commande: LIST -a Réponse: 150 Accepted data connection Réponse: 226-ASCII Réponse: 226-Options: -a -l Réponse: 226 3 matches total Statut: Succès de la lecture du contenu du dossier Statut: Récupération du contenu du dossier... Commande: CWD prefs Réponse: 250 OK. Current directory is /public_html/public_html/prefs Commande: PWD Réponse: 257 "/public_html/public_html/prefs" is your current location Commande: PASV Réponse: 227 Entering Passive Mode (216,108,235,38,133,30) Commande: LIST -a Réponse: 150 Accepted data connection Réponse: 226-ASCII Réponse: 226-Options: -a -l Réponse: 226 4 matches total Statut: Succès de la lecture du contenu du dossier Commande: DELE .pureftpd-upload.49a00928.15.1f63.841bf5d1 Réponse: 550 Prohibited file name: .pureftpd-upload.49a00928.15.1f63.841bf5d1 Commande: DELE .pureftpd-upload.49a01112.15.4127.1db34fbf Réponse: 550 Prohibited file name: .pureftpd-upload.49a01112.15.4127.1db34fbf Statut: Récupération du contenu du dossier... Commande: CDUP Réponse: 250 OK. Current directory is /public_html/public_html Commande: PWD Réponse: 257 "/public_html/public_html" is your current location Statut: Succès de la lecture du contenu du dossier Statut: Récupération du contenu du dossier... Commande: CWD /public_html/public_html/prefs Réponse: 250 OK. Current directory is /public_html/public_html/prefs Commande: PASV Réponse: 227 Entering Passive Mode (216,108,235,38,81,55) Commande: LIST -a Réponse: 150 Accepted data connection Réponse: 226-ASCII Réponse: 226-Options: -a -l Réponse: 226 4 matches total Statut: Succès de la lecture du contenu du dossier Statut: Connexion à 216.108.235.38:21... Statut: Connexion établie, attente du message d'accueil... Réponse: 220---------- Welcome to Pure-FTPd [TLS] ---------- Réponse: 220-You are user number 21 of 500 allowed. Réponse: 220-Local time is now 17:42. Server port: 21. Réponse: 220-This is a private system - No anonymous login Réponse: 220 You will be disconnected after 3 minutes of inactivity. Commande: USER a3356674 Réponse: 331 User a3356674 OK. Password required Commande: PASS Réponse: 230-User a3356674 has group access to: a3356674 Réponse: 230-OK. Current restricted directory is / Réponse: 230-51 files used (0%) - authorized: 6000 files Réponse: 230 428152 Kbytes used (27%) - authorized: 1536000 Kb Statut: Connecté Statut: Démarrage du téléchargement de /public_html/public_html/prefs/.pureftpd-upload.49a00928.15.1f63.841bf5d1 Commande: CWD /public_html/public_html/prefs Réponse: 250 OK. Current directory is /public_html/public_html/prefs Commande: PWD Réponse: 257 "/public_html/public_html/prefs" is your current location Commande: TYPE A Réponse: 200 TYPE is now ASCII Commande: PASV Réponse: 227 Entering Passive Mode (216,108,235,38,71,33) Commande: RETR .pureftpd-upload.49a00928.15.1f63.841bf5d1 Réponse: 550 Prohibited file name: .pureftpd-upload.49a00928.15.1f63.841bf5d1 Erreur: Erreur critique Statut: Démarrage du téléchargement de /public_html/public_html/prefs/.pureftpd-upload.49a01112.15.4127.1db34fbf Commande: PASV Réponse: 227 Entering Passive Mode (216,108,235,38,7,89) Commande: RETR .pureftpd-upload.49a01112.15.4127.1db34fbf Réponse: 550 Prohibited file name: .pureftpd-upload.49a01112.15.4127.1db34fbf Erreur: Erreur critique Statut: Récupération du contenu du dossier... Commande: CWD /lenvelopp.mp3 Réponse: 250 OK. Current directory is /lenvelopp.mp3 Commande: PWD Réponse: 257 "/lenvelopp.mp3" is your current location Commande: PASV Réponse: 227 Entering Passive Mode (216,108,235,38,126,131) Commande: LIST -a Réponse: 150 Accepted data connection Réponse: 226-ASCII Réponse: 226-Options: -a -l Réponse: 226 2 matches total Statut: Succès de la lecture du contenu du dossier Statut: Récupération du contenu du dossier... Commande: CWD /urh.htm Réponse: 250 OK. Current directory is /urh.htm Commande: PWD Réponse: 257 "/urh.htm" is your current location Commande: PASV Réponse: 227 Entering Passive Mode (216,108,235,38,90,182) Commande: LIST -a Réponse: 150 Accepted data connection Réponse: 226-ASCII Réponse: 226-Options: -a -l Réponse: 226 2 matches total Statut: Succès de la lecture du contenu du dossier Statut: Récupération du contenu du dossier... Commande: CWD /public_html Réponse: 250 OK. Current directory is /public_html Commande: PWD Réponse: 257 "/public_html" is your current location Statut: Succès de la lecture du contenu du dossier Statut: Déconnecté du serveur

This is technically not new - it was well described in Ticket #1414, but that ticket was timed out by the tracker. After the setup app downloads (I put it on the desktop because I know I'll have to click it), it attempts to start but fails with unknown error 193. This is on Windows XP SP3, and I have Panda for Desktops as my antivirus.

From what I can tell on Google, the error code 193 means "%1 is not a valid win32 process."

No biggie, just a nuisance, and it's been that way ever since I discovered your wonderful Filezilla client last summer.

Filezilla client crashes reconstructible if I try to a File with apostrophes in the name.

AppName: filezilla.exe
AppVer: 3.2.2.1
ModName: filezilla.exe
ModVer: 3.2.2.1
Offset: 0054f3d9

Hello i can no longer access my account; at the connection, the user name is accepted, but with the password, that remains frozen, and then i displays the following message: "Resolution of the address of abderrezak.freehost10.com Status: "Resolution of the address of abderrezak.freehost10.com Status: Connecting to 74.63.216.132:21... Status: connection is established, awaiting the welcome message... Answer: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Answer: 220-You are user number 40 of 50 allowed. Answer: 220-Local time is now 05:37. Server port: 21. Answer: 220-This is a private system - No anonymous login Answer: 220-IPv6 connections are also welcome on this server. Answer: 220 You will be disconnected after 15 minutes of inactivity. Commande: USER abderrezak Réponse: 331 User abderrezak OK. Password required Commande: PASS * Réponse: 530 Login authentication failed Error: impossible to establish a connection to server."

And I have not changed my password; that is what I do? Thank you. For your information, i have uploaded with this account my database please, help me

I dont know if it's only a FileZilla problem but it came up two times after i used the programm. All entries in the menus are black (black font and black background) until i move the mouse over them. THen they become visible. The problem exists now in all popup menus of my operating system (win xp sp3). Entries are black when i open a popup...very annoying. It's NOT a problem of a visual style!

New website - www.TheCrossingsLancasterPA.com / I did not build the site and am not a "techie." / I can make text corrections and update the site using FileZilla. That part works fine. / I need to be able to post mp3 files of Sunday teachings / When I use FileZilla, it takes the normal amount of time and it appears as though it is posting to the website / When the process is complete, on the website side, it shows "0" file size / I send the exact same sound file to the guy who built my site and he is able to upload it using FileZilla. / He uses FileZilla and has guided me to do the same / He is not the maintainer of the site and I have to be / What do I need to do or to adjust so that I can post the mp3 files from here?

Hi i gone through the settings of filezilla server and configured what you have given in the configuration settings, problem is i can able to login to filezilla server where i have hosted the site and pages loading successfull when i try to access the site error is coming the error is : Transfer channel can't be opened. Reason: No connection could be made because the target machine actively refused it. Error: Download failed.

Please resolve the problem ASAP Thanks Hari

I noticed this while I was trying to fix my problem with bug #4346 ​http://trac.filezilla-project.org/ticket/4346.

I know this is a bug because if I remember right, this was working a couple of versions back.

What happens is (or rather what not happens), when you override the "Default file exists action" on the root of the list (the one with the ftp user/server name) and open it again, it will select again the "use default action" even though you have selected otherwise (for example "Skip").

I hope this get fixed because it gets confusing when your doing a lot of file uploads.

Hi, this is not really a bug, is a suggestion to improve the interface.

In a file transfer, when a file already exist, FileZilla ask if the file must be replaced. All is ok, but the order of files i think is wrong.

First (upper) shows information of the file to by copied, and after (below) shows information of the file to be replaced.

In Windows, this kind of question shows first the older file (or whatever) and then the new file.

I had an older version of FileZilla, when it was updated I became confused when ask me in this new way. Why you do this ?

Best regards pam

The issue is dependant on the 'sum of the size of filenames'. If the sum of the size of filenames in the FTP folder is up to 21.6Kb, the file adapter is picking files. 657files - not picking -- 22 KB 21,723 bytes[Sum of the 'filename' size] 656files - picking -- 21,684 bytes[Sum of the 'filename' size]

Hi,

I think it would be really nice, if you made it possible to transfer a file between to servers, so you didnt have to first download file(s), disconnect, connect to the other server and upload.

If you could make it possible to view one server in the left 'window/table' and another server in the right window.

I dont know a decent way to send files between to servers, without using a third server/computer, which i dont suppose you know either.

The workaround would be connecting to both servers, and when the user wants to transfer the file(s), it downloaded them to the users computer and then, without the user doing anything, uploaded them to the second server.

When exporting (updated) Site Managing Entries from one client (v. 3.2.3 XP in this case) to the other, which contains this entries already (v.3.2.1 Vista in this case) duplicate entries are being created in "My Sites" folder. When importing Site Managing entries from 3.2.3 (XP) to 3.2.2.1 (Vista) duplicate entires are created.

The update dialog is cut off on the right side on Mac OS X. See attachment.

To reproduce the issue,

Open remote server connection (FTP) Upload a file that has been changed locally (file size should be different). Note the file size shown in the dialog box that confirms overwrite. After uploading the changed file, make more changes to the same file locally, and initiate upload again. This time the overwrite window will show the ORIGINAL file size, not the new changed file size that got changed because u uploaded new file in step(2)

I'm trying to create a utility for creating an XML file from a excel file for import of a queue setup in FileZilla. I've got everything but the remote server path. Example:

If I try and transfer images in an Images Folder all the images get sent to the root. I can't figure out how to create folders and the folder structure used by FileZilla. I exported a queue I created with filezilla to see the xml source and there are strange numbers used Example:

<File>

<LocalFile>C:\Documents and Settings\Default\Desktop\template-2\CSS\_styles.css</LocalFile> <RemoteFile>_styles.css</RemoteFile> <RemotePath>1 0 11 public_html 3 CSS</RemotePath> <Download>0</Download> <Size>7831</Size> <TransferMode>0</TransferMode> </File>

For the RemotePath why is there a [ 1 0 11 ] also before the folder CSS why is there a [ 3 ] ? why wouldn't the path be simple like: public_html/CSS/

I am using Filezilla, latest release, and are seeing connections being left open to the server after I have clicked on disconnect. The last command I do see coming across to the server is the LIST command, and that is were it is hanging.

The server is WS FTP 7, running SSL.

Below is an output of the log with debug on from Filezilla.

My system I am running Vista Ultimate X64. When using other clients the connections are closing out properly.

Status: Resolving address of ftp.ezpaycenters.net Status: Connecting to 64.143.96.59:990... Status: Connection established, initializing TLS... Trace: CTlsSocket::Handshake() Trace: CTlsSocket::Handshake() Trace: CTlsSocket::Handshake() Trace: CTlsSocket::Handshake() Trace: Handshake successful Trace: Cipher: AES-128-CBC, MAC: SHA1 Status: Verifying certificate... Trace: CFtpControlSocket::SendNextCommand() Status: TLS/SSL connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220 ftp.ezpaycenters.net X2 WS_FTP Server 7.0(44971704) Trace: CFtpControlSocket::SendNextCommand() Command: USER nareggiej Trace: CFtpControlSocket::OnReceive() Response: 331 Enter password Trace: CFtpControlSocket::SendNextCommand() Command: PASS Trace: CFtpControlSocket::OnReceive() Response: 230 User logged in Trace: CFtpControlSocket::SendNextCommand() Command: SYST Trace: CFtpControlSocket::OnReceive() Response: 215 UNIX Trace: CFtpControlSocket::SendNextCommand() Command: FEAT Trace: CFtpControlSocket::OnReceive() Response: 211-Extensions supported Response: SIZE Response: XMD5 Response: XSHA1 Response: XSHA256 Response: XSHA512 Response: XQUOTA Response: LANG EN, ES, FR, GE Response: MDTM Response: MLST size*;type*;perm*;create*;modify*; Response: REST STREAM Response: TVFS Response: UTF8 Response: AUTH SSL;TLS-P; Response: PBSZ Response: PROT C;P; Response: 211 end Trace: CFtpControlSocket::SendNextCommand() Command: PBSZ 0 Trace: CFtpControlSocket::OnReceive() Response: 200 PBSZ=0 Trace: CFtpControlSocket::SendNextCommand() Command: PROT P Trace: CFtpControlSocket::OnReceive() Response: 200 PRIVATE data channel protection level set Status: Connected Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Retrieving directory listing... Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/users/nareggiej" is current directory Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: TYPE I Trace: CFtpControlSocket::OnReceive() Response: 200 Transfer mode set to BINARY Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (64,143,96,59,254,106). Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CTlsSocket::Handshake() Trace: CTlsSocket::Handshake() Trace: CFtpControlSocket::OnReceive() Response: 125 Transferring directory Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTlsSocket::Handshake() Trace: Handshake successful Trace: Session resumed Trace: Cipher: AES-128-CBC, MAC: SHA1 Trace: CTransferSocket::OnConnect Trace: CTlsSocket::OnSocketEvent(): pending data, postponing close event Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer completed Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Disconnected from server Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66)

Hi. Recently I had to re-install my entire system (Win XP Pro SP2), but I was stupid enough to forget to export my site manager before that. So now I have a new installation of Filezilla and the copy of the installed files as they were on the previous installation of the software. As I don't have the exported xml file of the original site manager, as mentioned, is there still a way for me to get all the ftp sites I had on the previous installation of Filezilla, without having to add them all over again in the current one? Thanks a lot in advance.

The detection method used by the "Open" menu entry when right clicking on the Local files list seems to be flawed. On video files associated with Video Lan Client it reports:

The file 'E:\folder\file.avi' could not be opened: No program has been associated on your system with this file type.

Double clicking the video files in Windows explorer or Total Commander works and VLC opens the video.

For other extensions unrelated to Video Lan Client, like .txt, .doc, .pdf it works properly.

The OS is Windows 2003 Standard, 32bit.

I'm willing to run debug versions of Filezilla, just let me know.

If it helps, here are some registry entries: HKCR\.avi\(Default) = VLC.avi HKCR\VLC.avi\(Default) = VLC media file (.avi) HKCR\VLC.avi\shell\(Default) = Play HKCR\VLC.avi\shell\Play\(Default) = Play HKCR\VLC.avi\shell\Play\command\(Default) = "C:\Program Files\VideoLAN\VLC\vlc.exe" --started-from-file "%1"

I have configured my ProFTPD correct for working behind a firewall. So MasqueradeAddress and PassivePorts is set. Also a normal not encrypted connection is working in pasv-mode without any problems.

But using FTPES with TLS-Encryption always failed. There are several descriptions that this is a known bug and should be fixed in future Filezilla-versions. But now i am using a "future-version" 3.2.3.1 and it is still not working. :-(

Here the output from the connection: ====================================

Status: Auflösen der IP-Adresse für mydomain.mydyn.de Status: Verbinde mit 84.60.43.26:21... Status: Verbindung hergestellt, warte auf Willkommensnachricht... Antwort: 220 FTP server ready. Befehl: AUTH TLS Antwort: 234 AUTH TLS successful Status: Initialisiere TLS... Status: Überprüfe Zertifikat... Befehl: USER intern Status: TLS/SSL-Verbindung hergestellt. Antwort: 331 Password required for intern. Befehl: PASS Antwort: 230 User intern logged in. Befehl: PBSZ 0 Antwort: 200 PBSZ 0 successful Befehl: PROT P Antwort: 200 Protection set to Private Status: Verbunden Status: Empfange Verzeichnisinhalt... Befehl: PWD Antwort: 257 "/" is current directory. Befehl: TYPE I Antwort: 200 Type set to I Befehl: PASV Antwort: 227 Entering Passive Mode (192,168,1,3,53,66). Status: Vom Server gesendete Adresse für den Passiv-Modus ist nicht routingfähig. Benutze stattdessen die Serveradresse. Befehl: LIST Antwort: 150 Opening ASCII mode data connection for file list Status: Server hat die TLS-Verbindung nicht ordnungsgemäß geschlossen Fehler: Could not read from transfer socket: ECONNABORTED - Connection aborted Antwort: 226 Transfer complete. Fehler: Verzeichnisinhalt konnte nicht empfangen werden

I upgraded to 3.2.3.1 yesterday and then uploaded a page. My navigation bar is no longer viewable. I find that even when I reload a page with a previously viewable navigation bar (and have not made any edits to the page), that page is also without a navigation bar.

Have you heard of this problem before? I couldn't find anything in your tickets or wiki.

I am working on a site which was constructed using FrontPage (I apologize) and has .asp extensions.

I would like to propose a patch for a bug ticket 4199. The bug was the value of maxMultiple was set to not 0 upon checkbox of enabling limit number simultaneous connections. The patch follows the default action of the UI of setting maxMultiple to 1 upon the checkbox for enabling simultaneous connections.

I've attached a diff file of the changes.

please add a option for each account to limit the max available size of folder.

Small usability / consistency issue:

'File permissions...' context option opens a dialog that is labelled 'Change file attributes' - it would be better for usability if these were named consistently.

Hello everybody.

is a version of filezilla available, there can controlled with Visual Basic or above Command Line.

Many Thanks

Dear, first of all thanking you for developing such a nice client that also free but there is problem/bug with this software that when i want/try to upload my large video or media files to archive.org and if there is any disturbance in net connection then it will restart the upload instead of starting upload from the last position. or you can say there is need of a pause and resume button which can allow us to upload the large video files with the facility to PAUSE/RESUME

Thanking You Hitesh

Scenario 1

I had a long queue running, went to bed, checked the machine in the morning.

All files bar two had been successful.

A dialogue box offering an upgrade to 3.2.4 was on top of FileZilla.

I had only had half my first cup of tea for the day, so was a bit slow on uptake and decided I liked the offer of an automatic update, so clicked to carry on with the update.

When FileZilla returned, of course, the queues were all cleared, including the FAILED FILE queue.

Scenario 2

I had a long queue running, went to bed, checked the machine in the morning.

A power failure or crash occurs.

When FileZilla is reloaded, of course, the queues are all cleared.

Unhappy Result

I don't know which files failed to be downloaded.

Pain

I shall now have to hunt down the missing files, and as there is no recursive directory comparison, this will take some time. Alternatively, I could requeue all the files (about 2,000 in many hundreds of directories) and select on-exists=skip-if-same-size.

Possible Solution

PREFERABLE would be for the queues to have been saved as they were processed and restored upon loading FileZilla.

Related Ticket

[4456 is a related ticket | ​http://trac.filezilla-project.org/ticket/4456]

The uninstall icon is disabled - tried to us my windows XP control panel to remove - unable

PLEASE ADVISE

Thank you,

When connecting to 1 ftp server I receive an error after it logs me in that it can not retreive the directory listing. See Attached. I am currently running 3.2.4.1

It only occurs on my WAN. On my cable modem at home, it connects and transfers with no error. I spoke with our network data center and they are showing no "backtalk" from the firewall or the remote server. This has always worked until I loaded your software update about a week ago (version before this one). When I use my MAC to connect, It has no problems. No problems with DOS or Windows explorer.

Will someone in the know please make FileZilla Cocoa compliant. The UI looks terrible (same as the old Windows versions). Two thumbs up for whoever was involved in updating the icons and overall look of the Windows version - it's great. I use Windows at work and Mac at home. The Mac version is ugly (sorry, it could be prettier)!

Overall, everyone who makes FileZilla possible is doing an excellent job. I wish I could code.

If for some reason there's a problem transferring a file (for example drive full or connection timeout to server) it's moved to the "Failed transfers" tab. However, when I select the files and click "Reset and re queue files" or whatever is named, the files are moved back to the queue but they don't begin to resume.

For example, if Filezilla is configured to use three download threads and I transfer three files and one file transfer fails, the other two threads continue to download.

If I click "Reset and reque..", file gets moved back to the queue but Filezilla doesn't resume the file. If I want it to be resumed, I actually have to click on Process queue to stop all, and click Process queue again to have it resume. Or, I could just delete from the queue a file above the requeued and Filezilla will pop up the Resume dialogue.

When I choose Reset and requeue I think it's safe to assume I already solved the problem for which the transfer failed in the first place, so it should attempt to resume automatically if a download thread is available.

Perhaps it should even be placed in queue above other files currently transferred and should be resumed as soon as a download thread is available, because if there's some temporary problem (several server resets for example) there would be many partial files filling user's drive.

1. Download a file.
2. Right click on downloaded file and select edit.
3. Navigate to a different remote folder.
4. Edit and save the file.
5. Filezilla offers to upload the file. It goes to the new folder, without any way to change back to the original one.

Expected result: Upload the file to the folder it came from.

Workaround: 1. Select "No". Navigate to the correct folder and upload manually.

2. Remeber to navigate back before saving the file in your editor.
3. Edit/view the remote file instead of the local one. (But the connection may drop.)

When I try to open a file without accent, there is no problem. When a folder has an accent, it's possible to go as far as the file required, but then it becomes impossible to take it from the FTP to open it. When I use internet Explorer 8, there is no problem. But when I use Filezilla I get the message 550/data/Administration/information ÃlÃ"ves (this represents élèves in French)

I need a new username (or my old one) resent to me to me. My computer crashed and I lost lots of info. I run a business online and need to upload to my site today. Not sure what info you need from me, but my site is www.ReneeAddarioEvelyn.com and subsequently the ftp is ftp.reneeaddarioevelyn.com. My email can be either raddario@… or Renee@…. Please help!

TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING TABBED BROWSING ..... please

It's been a long time coming.

It's a feature I know everyone wants.

It would be helpful if the up and down arrows on the site manager quick list could auto scroll when the mouse is over them rather than the current click to scroll down or up to the next item.

*I've attached two files to the ticket.

Problem: I have a problem with the site manager drop down. I have so many sites that the drop down extends beyond my screen's resolution, which is fine since I can then click and hold on a little gray arrow icon near the bottom of the list. However, the scrolling takes forever, and isn't really natural... If I want to scroll backup I have to move my mouse to the top of the list and click and hold on a different arrow icon.

Solution: Implement a vertical scroll bar in the site manager on the right hand side!

please see attachments for the original problem, and mock-up of the proposed solution

I want to right click on the three (by default) transfer queue tabs to open the context menu for this tab. If I right click a tab which is in the background, it should switch to the foreground before the context menu opens.

Is this possible?

The two icons "file name filter" and "directory comparison" in the icon bar behave different. This may be confusing to new users. The "file name filter" is enabled/disabled with the right mouse button and configured with the left button. The "directory comparison" is enabled/disabled with the left mouse button and configured with the right button.

Possible solution: Use an icon with a separate drop-down arrow. Left clicking the icon enables/disables the function. Left clicking the arrow calls the configuration. Right clicking does nothing.

Why is the function "file name filters" in the menu "View", but "force showing hidden files" is in the menu "Server"? The commands do very similar things - if you look at it from the users point of view. Ordinary users do not care if the second function is processed on the server and the first on the client.

I think both items should be in the "View" menu side by side for usability reasons.

Dear Sir/Madam, I donwnloaded the free File Zilla from your website and also, for comparison, the shareware trial version of Smart FTP.

Whereas the process of uploading files and deletion of files is quicker in File Zilla, Editing of files is very cumbersome.

On the other hand, Editing facility in Smart FTP (e.g. automatic opening of .html files in Notepad and .css files in Microsoft Frontpage) is good. Best Wishes Prof (Wg Cdr) Gulshan Kumar Director, B-School