Custom Query (8212 matches)

Password provided in FileZilla is not used to decrypt the private key referenced in the PuTTY settings for the specified host.

In "ssh.c" (revision 1.8):

4128: need_pw = FALSE;

needs to be replaced with:

4128: if (ssh2_userkey_encrypted(cfg.keyfile, &comment)) { 4129: need_pw = TRUE; 4130: } else { 4131: need_pw = FALSE; 4132: }

Attached is "ssh.c" with the above changes made. I'd commit them myself, but I'm not a project developer. :)

Regards, Elahn

We have been experiencing a minor bug where if a user destroys his Kerberos tickets, then gets tickets for another user, FileZilla is unable to connect properly.

Quitting and re-launching FileZilla solves the

problem. This is under 1.9.7. We tried testing under 2.0.0, but encountered another bug (garbled server response.. see bug report).

In 2.0.0 (we were using 1.9.7), connecting via Kerberos authentication returns garbled responses (unencrypted connections are fine). USER, PASS, PWD seem to work fine. The next command PASV returns "632 <junk>" where <junk> is a very long string of characters. Then we get "Error: Could not retrieve directory listing". All other commands from that point on also return gibberish.

Clients: FileZilla 2.0.0.a on Win98SE and W2K

Servers: ProFTPD 1.2.6rc1-tls listening on port 990 on Solaris 8 and Linux using explicit SSL.

Uploads work fine, but downloads are getting timeout errors. The files transfer completely but FileZilla's status stays at 100% for several seconds before issuing the timeout error.

The same files transfer without problems using the lftp 2.6 client on Linux.

There is a bug in the site manager! Following steps should reproduce the problem:

• create a new site with 'SFTP using

SSH2' as server type

• export with all details
• clear list

import site manager list

Now the server type isn't 'SFTP using SSH2' as it should, instead it is 'FTP over SSL (implicit encryption)'.

This program failed to change Directory .. First I get into one directory and CDUP (but the program didn't send the command "CDUP") and I stuck right there.... I guess it was some kind of link problems.

Here's the record:

======= Status: Connecting to 140.117.190.94 ... Status: Connected with 140.117.190.94. Waiting for welcome message... Response: 220 Serv-U FTP-Server v2.5i for WinSock ready... Command: USER mfa Response: 331 User name okay, need password. Command: PASS * Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/d:/ftp" is current directory. Command: PORT 210,85,21,112,12,46 Response: 200 PORT Command successful. Command: TYPE A Response: 200 Type set to A. Command: LIST Response: 150 Opening ASCII mode data connection for /bin/ls. Response: 226 Transfer complete. Status: Directory listing successful Status: Retrieving directory listing... Command: CWD Download Response: 250 Directory changed to /d:/Downloads Command: PWD Response: 257 "/d:/Downloads" is current directory. Command: PORT 210,85,21,112,12,47 Response: 200 PORT Command successful. Command: TYPE A Response: 200 Type set to A. Command: LIST Response: 150 Opening ASCII mode data connection for /bin/ls. Response: 226 Transfer complete. Status: Directory listing successful Status: Retrieving directory listing... Command: CWD /d:/ftp/ Response: 250 Directory changed to /d:/Ftp Command: PWD Response: 257 "/d:/Ftp" is current directory. Error: Could not retrieve directory listing

======= END

despite this bug, this program is pretty cool, thx for making this one for us.

I wanted to rename a filename on ftp server. Unfortunately, the filename I rename to is the same as an existing file!

Finally, the existing file is replaced.

Is this a bug?

Thanks a lot

Howdy,

I'm running 2.02 here. have found that I'm unable to make the main window narrower than 820 pixels across.

Image available at:

​http://www.aracnet.com/~xman/pub/fz1.gif

BubbaX

There is incorrect link to the "Message Log" page ("messagelog.hzm" instead of "messagelog.htm") on the "Menus and Toolbars" page in the help file.

tried to upload a 2GB queue and filezilla crashed.

filezilla 2.0.2 win 2000 athlon XP 1700+, 512MB RAM

Filezilla 2.0.2 treeview crashes when I try to access a network drive mapping. The following happens:

1. The crash occurs when trying to access the drive

mapping through the local treeview.

2. It looks as if the local tree view is trying to

refresh, but the program crashes.

3. When I uncheck the treeview option in the view menu

to hide it, the program functions as normal.

4. It also does not crash when broswing non network

drives (ie c:\ drive)

This happens on my little home network, with just 2 machines and 1 mapped drive, have not tested on any other type of network.

Hope this is helpful. Filezilla is great, keep up the good work.

When using FileZilla with outside argument (ARGV[]) Example: FileZilla.exe ​ftp://ftp.belnet.be/debian- cd/3.0_r0/i386/debian-30r0-i386-binary-2.iso

Or

FileZilla ​ftp://ftp2.de.debian.org/debian- cd/image/3.0_r0/jigdo/i386/debian-30r0-i386-binary-4.iso

This one sounds easy to solve, because when cutting and pasting it to the "Quick Connect" address bar, it works perfect...

Howdy,

I'm running 2.0.2 on an XP system. When I upload to my location, there's only activity on the status bar at irregular times.

At first I thought it was because some of the items I was uploading were so small that the status bar just blinked (and I didn't catch it) but the example that I'm showing here:

​http://www.aracnet.com/~xman/pub/fz2.jpg

was a 1.2M file that took about 20 seconds to upload.

Sometimes the status bar shows activity and sometimes it doesn't. There doesn't really seem to be a pattern...

Thanks,

Bubba

Suppose I have a /goofy directory on the remote server, I'm currently located into it, and I want to upload into it the dirs /goofy/pluto and /goofy/venus together with the files they contain.

I select the two local dirs and upload them.

When the upload has finished, FileZilla should bring me back to the remote /goofy dir, like I was in the beginning. Instead, it remains _inside_ one of the two dirs just uploaded.

tried to export the queue, after hitting the button filezilla crashes

athlon xp, 1600+, 256mb ram

FileZilla Version 2.0.2

The upload of an empty directory do nothing : it don't create the directory on remote server.

Ps : sorry for my english, I m french

I have set "overwrite if newer" but after i restarted FileZilla setting is not saved... every time FZ ask me what to do if file already esists on server... May be It's me.. but maybe not !!! :-\

redips

When using "SFTP using SSH2" to transfer an ascii text file to a Unix server the file ends up with ^{M at the end of every line. It does so even if I set the Transfer Type to "ASCII" on either the Transfer menu or the default settings.}

I like the idea of saving to xml files. Site Manager - working fine. Filezilla Settings - keeps being reset to blank xml file at start up. === In SETTINGS I export my valves to an xml file called filezilla setting.xml, this I change to filezilla.xml as suggested by the dialogue box. == On restarting Filezilla a warning appears asking me to either save to the registery or use xml files. Surely if the file filezilla.xml with all my settings is present in the same folder as filezilla, this xml file should be automatically read. What happens is that when I select NO to not use the registry a blank filezilla.xml file is generated which wipes out all my stored settings. == OK I can import these settings from filezilla settings.xml but options like display remote directory on startup are ignored because the programme is running. == Me? or the software?

I have a problem with a FTP site. Remote file listing looks empty, although there are files in the directory.

I set on the debug options "Trace messages from the FTP engine" and "Show raw directory listing". LIST commands seems to work. The message log is:

Trace: -rw-r----- 1 user1 staff 42637978 01-10 2001 access.log Trace: drwxr-xr-x 4 user1 staff 512 17-10 2001 apps_backup Trace: -rwxr-x--- 1 user1 staff 1933 03-06 18:01 backup_start

Probably it's because of the date format returned from remote server? Is there a way to configure FileZilla to understand this date format?

The remote file list does not show all files. The listing is showing all, but the largest file. I have attached the trace of the file list request and bolded the one file that is not showing up. You will notice that the group and filesize are running together. I figured that is what is causing the problem.

FileZilla Version 2.1a

The server I am connecting to is: $ uname -a SunOS xxxxxxxxx 5.6 Generic_105181-23 sun4u sparc SUNW,Ultra-80

When given a wildcard file specification within the LIST or NLST command, the server responds with a "directory not found" message. This behaviour is regardless of which client I have tried.

If you go to the site manager and connect to a site defined as 'use GSS' (*.mit.edu for example) it connects if you have Kerberos tickets, or gives you an "Are you sure you want to send password in the clear" dialog if you don't have tickets. However, if you have tickets and enter a different username to connect with, it just asks for your password with no 'no tickets' warning. Entering a password yields an Error: could not retrieve directory listing. It then remains connected and periodically gives a 530 Please log in with USER and PASS .

I want to connect with a FTP server on a Windows machine. The defaut remote directory is like : "D:/path/to/my/directory" (i can't change it, it's a server of a provider)

but Filezilla add a "/" to this remote directory

When i want to download a file "file", filezilla send to the server : "/D:/path/to/my/directory/file"

and CWD failed because the server don't understand the directory name...

download works with other FTP clients like WSFTP or CuteFTP.

I think thaht in this case you must not add a "/" to the remote directory

I've connected to 2 or 3 different Solaris servers and have noticed the same problem on all of them: any executable files in the file listing have an asterix at the end of the name, for example: myscript.pl*

It is of course normal to see an asterix following files that have the execution bit set, since this is the way ls will often display such files, so that they can be quickly identified in a long listing.

However, the fact that the asterix is appearing in the Filezilla listing seems to confuse Filezilla, since any attempt to download these files will fail.

The following is an example of the error I'm describing, pulled from the filezilla log window:

Command: GET myscript.pl* c:\myscript.pl* FALSE Response: /www/cgi-bin/myscript.pl*: no such file or directory Error: Download failed

In general Filezilla is a great tool, but the only work around I've found for this is to temporarily turn off the executable bit using CHMOD ... which is not very handy to say the least, but necessary if I want to get at these files.

I have not seen this problem on Linux boxes, only Solaris.

In edit menu the option: Export Setting Import Setting are wrong translated.

The right translate are: Export Setting ---> Esportazione Settaggi Import Setting ---> Importazione Settaggi

Otherthewise you can use: Export Settaggi Import Settaggi

Bye.

When logged into a netware server it is possible to also access other servers in the same tree. This is done with the command CD servername/volumename/directoryname/ etc. etc.

Filezilla removes the first / and sends /servername/volumename/directoryname/ which of course fails. Some way to override the default behaviour so that the other servers can be accessed is required.

FileZilla preforms and illegal operation when pressing F1, just after the CHM help file has been opened. I'm using FileZilla 2.1.1 with Windows 2000 SP3

I was using Filezilla to download an entire directory structure. The connection was too slow so I closed the program. An hour later I cam back and needed to use ftp again. I open FileZilla and I get a popup box that says "error can't reaload queue item". I click "OK" only to have the same message pop up again. I have to click this popup approximately 100 times before FileZilla will start again.

When I connect to a server via SFTP using SSH2 FileZilla connects and everything seems wonderful. But when the connection is done I can't see any files. Although the message log says "Response: Sucessfully received 29 items". I've posted the whole message log further down.

Sometimes I can upload files, but I can't see the file. I know the file is there because the FTP-account holds the files for a website (if I upload a picture I can download an view it via HTTP). I've tried to upload a file which doesn't already exist in the directory (not overwriting) I couldn't see the file when it was uploaded. But I could get it via HTTP and it was there when I browsed the server internally.

I'm using FileZilla 2.1.1 on WinME with a ISDN- connection to the internet. I know I have the permissions to do everything in my account (view, write etc).

Here's the whole message log from a test session when this problem occured:

Status: Connecting to dakire.mine.nu:2022 ... Status: Connected with dakire.mine.nu:2022, initializing SFTP connection... Command: CONNECT eliasa@…:-26 Response: Remote working directory is /usr/home/eliasa Status: Connected Status: Retrieving directory listing... Command: CD /usr/home/eliasa/public_html/ Response: Remote working directory is now /usr/home/eliasa/public_html Command: LIST Response: Listing directory /usr/home/eliasa/public_html Response: Sucessfully received 29 items Status: Directory listing successful

HI, filezilla it's great. Sometimes filezilla ask me to replace a file that was uploaded with 0 Kb with the original one (with more than one Kb). I'm using W98SE and up/down from a W2000 IIS5 server. Any suggestions?

Example:

a remote directory /test/ contains a file beginning with a dot, '.htpasswd'. If you try and delete /test/ you receive a 550 error ("directory is not empty"), even though it appears empty in the GUI.

Workaround:

You can only delete the dir if you check the option:

• Always show

hidden file ...in Settings -> Remote File List.

Solution:

The current 550 error with the empty GUI list is extremely confusing. FileZilla should delete all content in a directory - including hidden files - when a directory delete is requested.

Thanks for a great piece of software though!

• Aaron

When uploading something, it might happen that the remote site's disk is full. At that case, ftp client should stop retrying transfer queue items for that server. I think FileZilla is not implementing this feature for now.

A 1.9 MB file is listed as 1MB in local or remote file views when "Filesize format in details style" is set to Auto or MB.

Perhaps filesize should be rounded and carried to at least one decimal place?

The header control for the transfer queue list view sometimes fails to paint correctly. To reproduce:

1. Start filezilla (no items in queue)
2. Dismiss site manager dialog
3. Maximize application
4. ALT+TAB to another application which is not

maximized (alternatively do start->run and run CALC).

5. ALT+TAB back to filezilla.

When I do this I see that the header control disappears either totally or partially. If you put the second application so that it covers part of the header control then alt-tab back to filezilla I get the portion of the header control that was obscured repainted, but the rest remains blank. This does not appear to occur if something is in the list view.

Running Windows 2000, SP2.

Please add support for EPLF formatting of LIST command output.

EPLF Specification: ​http://cr.yp.to/ftp/list/eplf.html

Test site: ​ftp://cr.yp.to/

Just a suggestion:

The status bar should show the combined status for all downloads when doing multiple downloads.

Thanks

If the Default Remote Directory only contains / it will not be saved and even if setting this manuell in FileZilla.xml it will be cleared.

characters added to file on upload, a 15KB local file becomes a 1MB file once uploaded on the server side.

Version 2.00a (Windows)

i have FZserver

and i dont't have the welcome message when i connect to my server... even if i use filezilla to go on my ftp.. (i've tried with IE : same result, and with some others ftp client , etc...)

hello, i wonder if it caused by my config and if anybody can reproduce that on windows98se

juste after i opended filezilla 2.1.2 [french language save config in xml file and remember the panel position and width ]

then when i drag the slide to move right in the queue panel the headers of the columns disapears.

and when i move my mouse over the headers columns they reapears !

Hello,

When using FileZilla in the Unix environment, my timestamps are off by 4 hours. I have encountered this with 1.9x and 2.x versions of FileZilla. Strangely, this is the only file sharing application which has this bug (no other apps have this problem). Please, if you have any information to a solution, email me.

Regards,

Rupesh Kapadia

rkapadia@…

In FileZilla 2.1.2, when "Remember Windows Size and Position of FileZilla" is checked, the transfer queue pane displays an odd quirk.

When FileZilla is started again, the size of the pane decreases. Upon each restart of the program, the pane gets smaller and smaller until it is no longer visible.

FileZilla Server (0.7.3.beta) can't handle filenames, which use ASCII code 255. LIST command works correctly, while RETR causes Error 550 "File not found" and returns filename with omissed chars (both spaces and chars with code 255).

Hello, In italian interface I have find this mistake:

in menu Queue: option "Use multiple connections" aren't translated; it may be "Usa Connessioni Multiple".

in menu Server: ("Remoto"): this option aren't translated "Copy URL to Clipboard" (it may be "Copia URL negli appunti" or "Copia URL nella Clipboard"); "Entre raw FTP command" (it may be "Inserisci riga comando FTP" or "Inserisci comando FTP").

Thanks.

Bye.

it seems that for some reason client doesn't send ftp quit command when it's disconnecting.

I have my hard drive logically partitioned -- the first partition has Windows and FileZilla, the second one is only 40 MB in size for misc. stuff.

When I am transferring a large (51 MB) file to my second partition, at some point (not immediately, but I guess when it runs out of space) FileZilla pops up a window saying that this file already exists and would I like to overwrite it, skip it, rename it, etc. When I choose overwrite it, FileZilla begins transferring the file from the beginning. When I choose rename it, FileZilla creates a 0-byte file with that name and immediately pops up the same window again.

Suggested behavior: pop up a message saying that the volume is out of space and possibly offer to save to a different location.

I downloaded the new versionof Filezilla server, and when double-clicked the exe file pops open a window that looks like it will run like the installer for the client of FZ, but after a fraction of second it disappears and nothing happens.

In case I had a bad transfer I went ahead and downloaded it again from a different mirror, with the same result. To be extra a redundant I tried it one more time a couple hours later, and had the same result.

I tried to eliminate anything on my end which may be interfering, such as antivirus software and other apps, and still have not been able to get it to work, so I thought I should let you know.

Thanks for a great product - I appreciate Filezilla immensely!

When I get a big file from a server (> 60 min.) Timeout

interrupts this transfer after the defined time and

connects again.

Unfortunately i can neither deactivate Timeout nor can I enter a value bigger than 999 sec.

I use version 2.1.2

When connected to several Solaris servers (even as root), filezilla doesn't show the entire dir list or all the archives, as far as I can see its a rather erratical behaviour, some files that are shown have the same attributes as some that aren`t shown, nevertheless, all the files appear on the trace in the debug panel bug then they do not appear on the dirtree or the file panel.

Hi, in italian interface, translation of option windows - Ident Server customization is not implemented.

String: "Some FTP servers require that you have an Ident server running when connecting to them. Enable Ident server. User ID - System Enable only when connecting. Only accept requests from the same IP"

May be translate:

"Alcuni server FTP richiedono che ti abbia un server Ident in esecuzione quando ti connetti

Abilita il server Ident

ID Utente (or untraslate it) - Sistema

Abilita solo quando è connesso. Accetta solo le richieste provenienti dallo stesso IP"

Thanks.

Bye.

This is similar, but not the same as bug #515812. That bug report deals with not being able to change dir into a directory with list protect. My bug report refers to trying to change dir into a directory _further_ below a directory with list protect.

For example, dir /var/log has list disabled (via disabling read), but has navigation enabled (via enabling execute). Subdirs (and subsubdirs, etc.) below /var/log allow both reading and navigation. So, I should be able to use Filezilla to get to /var/log/foo and /var/log/foo/bar and even /var/log/foo/bar/baz. Indeed, Filezilla will show me the contents of /var/log/foo, but it will not show me the contests of either /var/log/foo/bar, nor /var/log/foo/bar/baz. Filezilla stops at 1 level down.

If it can do 1 level down, why not 2 and 3? Using

WS_FTP works (though it does complain about not being able to set the directory identifier; but at least I can get a listing and transfer the needed files).

An example from the log:

Command: CD /var/log/foo/bar/ Response: Remote working directory is now /var/log/foo Status: Directory listing successfull

In this example from the log, the directory listing is that of /var/log/was, which is interesting because it shows that Filezilla can list dir contents 1 level below a read-protected dir. It can not list dir contents more levels down.

When downloading from an FTP server that enjoys disconnecting frequently, FileZilla will attempt to retry the file. When it's "had enough" the transfer status will indicate "Transferring" but nothing is actually happening. I can reconnect to the FTP server, however the transfer status doesn't change. If I right-click on the download job, my only option is "Remove from queue" and "Move Up/Down." If I choose "Remove" the job doesn't get removed from the queue and the status stays at "transferring." Closing and reopening FileZilla is the only way to clear the status.

I upgraded from 2.1.2 to 2.1.3 but whenever I try to connect I get the error "Can't resolve host name". The settings for 2.1.3 work fine when imported into 2.1.2. The system is behind a firewall and requires going through the proxy.

The debug output for 2.1.3 is as follows:

FileZilla started (12/06/2002 16:58:30) Status: Connecting to ftp.rncsoftware.com ... Trace: ControlSocket.cpp(118): OnAsyncGetHostByName(11004, 0, 2) Error: Can't resolve host name Trace: FtpControlSocket.cpp(708): DoClose(0) Trace: FtpControlSocket.cpp(2680): ResetOperation (4100) Error: Unable to connect!

The debug output for 2.1.2 (which is successful at connecting) is as follows:

FileZilla started (12/06/2002 17:07:12) Trace: ControlSocket.cpp(244): m_pProxyLayer changed state from 0 to 1 Status: Connecting to ftp.rncsoftware.com ... Trace: ControlSocket.cpp(244): m_pProxyLayer changed state from 1 to 2 Trace: ControlSocket.cpp(244): m_pProxyLayer changed state from 2 to 4 Trace: FtpControlSocket.cpp(652): OnConnect(0) Status: Connected with ftp.rncsoftware.com. Waiting for welcome message... Trace: FtpControlSocket.cpp(527): OnReceive(0) Trace: FtpControlSocket.cpp(527): OnReceive(0) Response: 220 ProFTPD FTP Server ready.

This problem occured on with Filezilla version 2.1a running on Windows XP, both home and pro edition. The host was scuacc.scu.edu which is running OpenVMS Alpha Operating System, Version 6.2.

I created a new directory on the server, attempted to change to that directory, and failed. I then telneted into the server, created a file in the directory, and tried to change directories in Filezilla again, it worked fine. Here is the output from Filezilla during this trial.

Status: Connecting to scuacc.scu.edu ... Status: Connected with scuacc.scu.edu. Waiting for welcome message... Response: 220 SCUACC FTP Server (Version 4.2) Ready. Command: USER niglesias Response: 331 Username NIGLESIAS requires a Password Command: PASS Response: 230 User logged in. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "STUDENT:[NIGLESIAS]" is current directory. Command: PORT 192,168,0,18,16,112 Response: 200 PORT command successful. Command: TYPE A Response: 200 TYPE set to ASCII. Command: LIST Response: 150 Opening data connection for STUDENT:[NIGLESIAS]*.*;* (64.165.203.112,4208) Response: 226 LIST Directory transfer complete. Status: Directory listing successful Status: Retrieving directory listing... Command: CWD WWW Response: 250-CWD command successful. Response: 250 New default directory is STUDENT:[NIGLESIAS.WWW] Command: PWD Response: 257 "STUDENT:[NIGLESIAS.WWW]" is current directory. Command: PORT 192,168,0,18,16,115 Response: 200 PORT command successful. Command: TYPE A Response: 200 TYPE set to ASCII. Command: LIST Response: 150 Opening data connection for STUDENT:[NIGLESIAS.WWW]*.*;* (64.165.203.112,4211) Response: 226 LIST Directory transfer complete. Status: Directory listing successful Status: Retrieving directory listing... Command: CWD STUDENT:[NIGLESIAS] Response: 250-CWD command successful. Response: 250 New default directory is STUDENT:[NIGLESIAS] Command: PWD Response: 257 "STUDENT:[NIGLESIAS]" is current directory. Command: CWD WEBPAGE Response: 250-CWD command successful. Response: 250 New default directory is STUDENT:[NIGLESIAS.WEBPAGE] Command: PWD Response: 257 "STUDENT:[NIGLESIAS.WEBPAGE]" is current directory. Command: PORT 192,168,0,18,16,116 Response: 200 PORT command successful. Command: TYPE A Response: 200 TYPE set to ASCII. Command: LIST Response: 150 Opening data connection for STUDENT:[NIGLESIAS.WEBPAGE]*.*;* (64.165.203.112,4212) Response: 550 file not found Error: Could not retrieve directory listing Status: Retrieving directory listing... Command: CWD STUDENT:[NIGLESIAS] Response: 250-CWD command successful. Response: 250 New default directory is STUDENT:[NIGLESIAS] Command: PWD Response: 257 "STUDENT:[NIGLESIAS]" is current directory. Command: CWD WEBPAGE Response: 250-CWD command successful. Response: 250 New default directory is STUDENT:[NIGLESIAS.WEBPAGE] Command: PWD Response: 257 "STUDENT:[NIGLESIAS.WEBPAGE]" is current directory. Command: PORT 192,168,0,18,16,117 Response: 200 PORT command successful. Command: TYPE A Response: 200 TYPE set to ASCII. Command: LIST Response: 150 Opening data connection for STUDENT:[NIGLESIAS.WEBPAGE]*.*;* (64.165.203.112,4213) Response: 550 file not found Error: Could not retrieve directory listing Command: PWD Response: 257 "STUDENT:[NIGLESIAS.WEBPAGE]" is current directory. Command: PWD Response: 257 "STUDENT:[NIGLESIAS.WEBPAGE]" is current directory. Command: PWD Response: 257 "STUDENT:[NIGLESIAS.WEBPAGE]" is current directory. Command: PWD Response: 257 "STUDENT:[NIGLESIAS.WEBPAGE]" is current directory. Command: REST 0 Response: 502 REST is unimplemented. Command: REST 0 Response: 502 REST is unimplemented. Command: TYPE I Response: 200 TYPE set to IMAGE. Status: Retrieving directory listing... Command: CWD STUDENT:[NIGLESIAS] Response: 250-CWD command successful. Response: 250 New default directory is STUDENT:[NIGLESIAS] Command: PWD Response: 257 "STUDENT:[NIGLESIAS]" is current directory. Command: CWD WEBPAGE Response: 250-CWD command successful. Response: 250 New default directory is STUDENT:[NIGLESIAS.WEBPAGE] Command: PWD Response: 257 "STUDENT:[NIGLESIAS.WEBPAGE]" is current directory. Command: PORT 192,168,0,18,16,128 Response: 200 PORT command successful. Command: TYPE A Response: 200 TYPE set to ASCII. Command: LIST Response: 150 Opening data connection for STUDENT:[NIGLESIAS.WEBPAGE]*.*;* (64.165.203.112,4224) Response: 550 file not found Error: Could not retrieve directory listing Command: REST 0 Response: 502 REST is unimplemented. Command: PWD Response: 257 "STUDENT:[NIGLESIAS.WEBPAGE]" is current directory. Command: REST 0 Response: 502 REST is unimplemented. Command: TYPE A Response: 200 TYPE set to ASCII. Command: PWD Response: 257 "STUDENT:[NIGLESIAS.WEBPAGE]" is current directory. Status: Retrieving directory listing... Command: CWD STUDENT:[NIGLESIAS] Response: 250-CWD command successful. Response: 250 New default directory is STUDENT:[NIGLESIAS] Command: PWD Response: 257 "STUDENT:[NIGLESIAS]" is current directory. Command: CWD WEBPAGE Response: 250-CWD command successful. Response: 250 New default directory is STUDENT:[NIGLESIAS.WEBPAGE] Command: PWD Response: 257 "STUDENT:[NIGLESIAS.WEBPAGE]" is current directory. Command: PORT 192,168,0,18,16,133 Response: 200 PORT command successful. Command: TYPE A Response: 200 TYPE set to ASCII. Command: LIST Response: 150 Opening data connection for STUDENT:[NIGLESIAS.WEBPAGE]*.*;* (64.165.203.112,4229) Response: 226 LIST Directory transfer complete. Status: Directory listing successful Command: REST 0 Response: 502 REST is unimplemented. Command: PWD Response: 257 "STUDENT:[NIGLESIAS.WEBPAGE]" is current directory. Command: TYPE I Response: 200 TYPE set to IMAGE. Command: TYPE I Response: 200 TYPE set to IMAGE. Command: REST 0 Response: 502 REST is unimplemented. Command: TYPE A Response: 200 TYPE set to ASCII. Command: TYPE I Response: 200 TYPE set to IMAGE. Command: REST 0 Response: 502 REST is unimplemented. Command: TYPE I Response: 200 TYPE set to IMAGE. Command: TYPE A Response: 200 TYPE set to ASCII. Command: TYPE A Response: 200 TYPE set to ASCII. Command: CWD STUDENT:[NIGLESIAS] Response: 250-CWD command successful. Response: 250 New default directory is STUDENT:[NIGLESIAS] Command: MKD NEWDIR Response: 257 "STUDENT:[NIGLESIAS.NEWDIR]" directory created. Status: Retrieving directory listing... Command: CWD NEWDIR Response: 250-CWD command successful. Response: 250 New default directory is STUDENT:[NIGLESIAS.NEWDIR] Command: PWD Response: 257 "STUDENT:[NIGLESIAS.NEWDIR]" is current directory. Command: PORT 192,168,0,18,16,251 Response: 200 PORT command successful. Command: TYPE A Response: 200 TYPE set to ASCII. Command: LIST Response: 150 Opening data connection for STUDENT:[NIGLESIAS.NEWDIR]*.*;* (64.165.203.112,4347) Response: 550 file not found Error: Could not retrieve directory listing Command: PWD Response: 257 "STUDENT:[NIGLESIAS.NEWDIR]" is current directory. Status: Retrieving directory listing... Command: CWD STUDENT:[NIGLESIAS] Response: 250-CWD command successful. Response: 250 New default directory is STUDENT:[NIGLESIAS] Command: PWD Response: 257 "STUDENT:[NIGLESIAS]" is current directory. Command: CWD NEWDIR Response: 250-CWD command successful. Response: 250 New default directory is STUDENT:[NIGLESIAS.NEWDIR] Command: PWD Response: 257 "STUDENT:[NIGLESIAS.NEWDIR]" is current directory. Command: PORT 192,168,0,18,16,252 Response: 200 PORT command successful. Command: TYPE A Response: 200 TYPE set to ASCII. Command: LIST Response: 150 Opening data connection for STUDENT:[NIGLESIAS.NEWDIR]*.*;* (64.165.203.112,4348) Response: 226 LIST Directory transfer complete. Status: Directory listing successful Command: TYPE I Response: 200 TYPE set to IMAGE. Command: PWD Response: 257 "STUDENT:[NIGLESIAS.NEWDIR]" is current directory. Command: REST 0 Response: 502 REST is unimplemented. Command: PWD Response: 257 "STUDENT:[NIGLESIAS.NEWDIR]" is current directory. Command: TYPE A Response: 200 TYPE set to ASCII. Command: TYPE I Response: 200 TYPE set to IMAGE. Command: TYPE I Response: 200 TYPE set to IMAGE. Command: TYPE I Response: 200 TYPE set to IMAGE. Command: TYPE I Response: 200 TYPE set to IMAGE. Command: TYPE I Response: 200 TYPE set to IMAGE. Command: TYPE A Response: 200 TYPE set to ASCII. Command: TYPE I Response: 200 TYPE set to IMAGE. Command: TYPE A Response: 200 TYPE set to ASCII. Command: TYPE A Response: 200 TYPE set to ASCII. Command: TYPE I Response: 200 TYPE set to IMAGE. Command: TYPE A Response: 200 TYPE set to ASCII. Command: TYPE A Response: 200 TYPE set to ASCII. Command: PWD Response: 257 "STUDENT:[NIGLESIAS.NEWDIR]" is current directory. Command: PWD Response: 257 "STUDENT:[NIGLESIAS.NEWDIR]" is current directory. Command: REST 0 Response: 502 REST is unimplemented. Command: TYPE I Response: 200 TYPE set to IMAGE. Command: TYPE I Response: 200 TYPE set to IMAGE. Command: PWD Response: 257 "STUDENT:[NIGLESIAS.NEWDIR]" is current directory. Command: PWD Response: 257 "STUDENT:[NIGLESIAS.NEWDIR]" is current directory. Command: PWD Response: 257 "STUDENT:[NIGLESIAS.NEWDIR]" is current directory. Command: PWD Response: 257 "STUDENT:[NIGLESIAS.NEWDIR]" is current directory. Command: TYPE I Response: 200 TYPE set to IMAGE. Command: REST 0 Response: 502 REST is unimplemented. Command: PWD Response: 257 "STUDENT:[NIGLESIAS.NEWDIR]" is current directory. Command: PWD Response: 257 "STUDENT:[NIGLESIAS.NEWDIR]" is current directory. Command: TYPE A Response: 200 TYPE set to ASCII. Command: REST 0 Response: 502 REST is unimplemented. Command: TYPE A Response: 200 TYPE set to ASCII. Command: PWD Response: 257 "STUDENT:[NIGLESIAS.NEWDIR]" is current directory. Command: TYPE I Response: 200 TYPE set to IMAGE. Command: TYPE A Response: 200 TYPE set to ASCII. Command: TYPE A Response: 200 TYPE set to ASCII. Command: PWD Response: 257 "STUDENT:[NIGLESIAS.NEWDIR]" is current directory. Command: TYPE I Response: 200 TYPE set to IMAGE. Command: REST 0 Response: 502 REST is unimplemented. Command: TYPE I Response: 200 TYPE set to IMAGE. Command: PWD Response: 257 "STUDENT:[NIGLESIAS.NEWDIR]" is current directory. Command: PWD Response: 257 "STUDENT:[NIGLESIAS.NEWDIR]" is current directory. Status: Retrieving directory listing... Command: CWD STUDENT:[NIGLESIAS] Response: 250-CWD command successful. Response: 250 New default directory is STUDENT:[NIGLESIAS] Command: PWD Response: 257 "STUDENT:[NIGLESIAS]" is current directory. Status: Directory listing successful Command: DELE STUDENT:[NIGLESIAS.NEWDIR]BLAH. Response: 550-Failed to delete file STUDENT:[NIGLESIAS.NEWDIR]BLAH.; Response: 550 The file specification must contain a name, type and version number (even if wildcarded). Command: RMD STUDENT:[NIGLESIAS]NEWDIR Response: 550-Failed to delete directory STUDENT:[NIGLESIAS]NEWDIR.; Response: 550 The file specification must contain a name, type and version number (even if wildcarded). Status: Disconnected from server Status: Connecting to scuacc.scu.edu ... Status: Connected with scuacc.scu.edu. Waiting for welcome message... Response: 220 SCUACC FTP Server (Version 4.2) Ready. Command: USER niglesias Response: 331 Username NIGLESIAS requires a Password Command: PASS Response: 230 User logged in. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "STUDENT:[NIGLESIAS]" is current directory. Command: PORT 192,168,0,18,18,4 Response: 200 PORT command successful. Command: TYPE A Response: 200 TYPE set to ASCII. Command: LIST Response: 150 Opening data connection for STUDENT:[NIGLESIAS]*.*;* (64.165.203.112,4612) Response: 226 LIST Directory transfer complete. Status: Directory listing successful Command: CWD STUDENT:[NIGLESIAS] Response: 250-CWD command successful. Response: 250 New default directory is STUDENT:[NIGLESIAS] Command: MKD test Response: 257 "STUDENT:[NIGLESIAS.TEST]" directory created. Status: Retrieving directory listing... Command: CWD test Response: 250-CWD command successful. Response: 250 New default directory is STUDENT:[NIGLESIAS.TEST] Command: PWD Response: 257 "STUDENT:[NIGLESIAS.TEST]" is current directory. Command: PORT 192,168,0,18,18,5 Response: 200 PORT command successful. Command: TYPE A Response: 200 TYPE set to ASCII. Command: LIST Response: 150 Opening data connection for STUDENT:[NIGLESIAS.TEST]*.*;* (64.165.203.112,4613) Response: 550 file not found Error: Could not retrieve directory listing

* At this point I create a file in the TEST directory *

Status: Retrieving directory listing... Command: CWD STUDENT:[NIGLESIAS] Response: 250-CWD command successful. Response: 250 New default directory is STUDENT:[NIGLESIAS] Command: PWD Response: 257 "STUDENT:[NIGLESIAS]" is current directory. Command: CWD test Response: 250-CWD command successful. Response: 250 New default directory is STUDENT:[NIGLESIAS.TEST] Command: PWD Response: 257 "STUDENT:[NIGLESIAS.TEST]" is current directory. Command: PORT 192,168,0,18,18,6 Response: 200 PORT command successful. Command: TYPE A Response: 200 TYPE set to ASCII. Command: LIST Response: 150 Opening data connection for STUDENT:[NIGLESIAS.TEST]*.*;* (64.165.203.112,4614) Response: 226 LIST Directory transfer complete. Status: Directory listing successful

This seems to me like simply a lack of support for OpenVMS servers, but I'm not working from much. I actually found this problem in the process of posting bug 650374 "change to new directory failed." They both take place on the scuacc.scu.edu server running OpenVMS Alpha Operating System, Version V6.2.

The problem is simply that I can't delete a folder or files. I think it has to do with the OS adding version numbers to files and Filezilla not taking this into account. Here is a log of a failed directory delete (TEST) and a failed file delete (Q.).

Status: Retrieving directory listing... Command: CWD STUDENT:[NIGLESIAS] Response: 250-CWD command successful. Response: 250 New default directory is STUDENT:[NIGLESIAS] Command: PWD Response: 257 "STUDENT:[NIGLESIAS]" is current directory. Status: Directory listing successful Command: DELE STUDENT:[NIGLESIAS.TEST]BLAH. Response: 550-Failed to delete file STUDENT:[NIGLESIAS.TEST]BLAH.; Response: 550 The file specification must contain a name, type and version number (even if wildcarded). Command: RMD STUDENT:[NIGLESIAS]TEST Response: 550-Failed to delete directory STUDENT:[NIGLESIAS]TEST.; Response: 550 The file specification must contain a name, type and version number (even if wildcarded). Command: DELE STUDENT:[NIGLESIAS]Q. Response: 550-Failed to delete file STUDENT:[NIGLESIAS]Q.; Response: 550 The file specification must contain a name, type and version number (even if wildcarded).

This may be useful? This is a directory listing in the TEST directory (different from where I was trying to delete things). It shows two files, both called blah with version 1 and 2, and a single file called foo with version 1 only.

Filename Blocks Date Modified Owner Protection

Directory STUDENT:[NIGLESIAS.TEST]

BLAH.;2 1 8-DEC-2002 01:16:16.31 [1000,46412] (RWED,RWED_{) BLAH.;1 1 8-DEC-2002 01:03:07.81 [1000,46412] (RWED,RWED}) FOO.;1 1 8-DEC-2002 01:18:21.69 [1000,46412] (RWED,RWED₎

Total of 3 files, 3 blocks. [NIGLESIAS.TEST]>

Feel free to contact me if you need anymore tests, or even access to an account on the server if its important.

Uploading of a file to a remote empty dir fails if the file exists in the remote dir's parent dir (ie. as a sibling to the remote dir).

For example:

When trying to upload local file c:\tmp\foo to remote

empty dir /tmp/test/foo, if the remote file /tmp/foo exists, then filezilla will think that file "foo" already exists on the remote host and will prompt if I wan to overwrite or not. If I skip, then it skips ok; but if I ask to overwrite (hoping it will writing into /tmp/test/foo, not into /tmp/foo), then filezilla will fail. It will display the contents of /tmp/test/ and will show status of "Too many retries".

Thanks in advance for fixing this bug. /Eric

The menu option "View / Edit" should use the windows explorer default editor if "File viewing / editing" doesn't have a program manually configured to view/edit the file...

Thanks.

It is standard practice in MS Windows UI design to put an elipsis (...) on any manu item which will raise a dialog box. Elipses are present on the Transfer->Manual Transfer option, the Queue->Import option, etc., but are not present on the Edit->Settings menu option and others. A quick look over the mneu and simple edit of the resource file should fix this.

david_markle@…

Trying to put a file on a remote host filezilla asks me what to do (overwrite, overwrite if newer, ...) if the same filename already exists. If I select overwrite and OK I get the same query again and again. Exiting leaves the file on the remote server with file size 0 bytes.

Any hints?

Thanks. Mathias

Logfile:

Status: Verbinden mit www.xx.de... Status: Verbunden mit gate.xxx.com. Warten auf Willkommens Mitteilung... Antwort: 220 xxx.com FTP proxy (Version V5.0) ready. Status: Versuche www.xx.de über den Proxy zu erreichen Befehl: USER username@… Antwort: 331-(----GATEWAY CONNECTED TO www.xx.de----) Antwort: 331-(220 FTP Server ready.) Antwort: 331 Password required for username. Befehl: PASS Antwort: 230 User username logged in. Status: Verbindung hergestellt Status: Starte Upload von d:\Startseite.html Befehl: CWD /test/ Antwort: 250 CWD command successful. Befehl: PWD Antwort: 257 "/test" is current directory. Befehl: TYPE A Antwort: 200 Type set to A. Befehl: PASV Antwort: 227 Entering Passive Mode (...) Befehl: STOR Startseite.html Fehler: Verbindung getrennt Fehler: Upload fehlgeschlagen Fehler: Timeout entdeckt! Status: Verbinden mit www.xx.de... Status: Verbunden mit gate.xx.com. Warten auf Willkommens Mitteilung... Antwort: 220 xxx.com FTP proxy (Version V5.0) ready. Status: Versuche www.xx.de über den Proxy zu erreichen Befehl: USER username@… Antwort: 331-(----GATEWAY CONNECTED TO www.xx.de----) Antwort: 331-(220 FTP Server ready.) Antwort: 331 Password required for username. Befehl: PASS Antwort: 230 User username logged in. Status: Verbindung hergestellt Status: Starte Upload von d:\Startseite.html Befehl: CWD /test/ Antwort: 250 CWD command successful. Befehl: PWD Antwort: 257 "/test" is current directory. Befehl: TYPE A Antwort: 200 Type set to A. Befehl: PASV Antwort: 227 Entering Passive Mode (...) Befehl: STOR StartseiteD.html Fehler: Verbindung getrennt Fehler: Upload fehlgeschlagen Fehler: Timeout entdeckt!

Hi, can somebody please fix this problem. It has been submitted before, and I don't see anything. We do also have the same problem. "Incorrect Remote Date/Time The Date/Time for the remote server is showing times 4 hours ahead of what the server says they are. For example, FileZilla shows a file has a Date/Time of "08/02/2002 02:14" but the same file on the server shows a Last Modified Date/Time of "Thu Aug 1 22:14:38 2002". The server is showing the correct modification date/time."

Steps to reproduce: 1) Run the installer for v2.1.3a. 2) Choose English. 3) Do not choose the insecure mode.

The attached form is displayed, note the unreadable text above "Setup was completed successfully.

Environment: Windows 2K SP3.

There are 2 bugs:

1. There is no Cancel button and pressing [ESC] carries

the command selected by the option button, instead of just skipping (as if closing the window).

2. Remote file information (such as size and date and

time) are not correctly displayed if the file was already transfered (from local).

Thanks.

Resuming a broken download on a host that does not support resume will cause the file to be overwritten. That's good. Unfortunately, FileZilla will try to resume any file even if the file had been downloaded successfully in previous attempts. The result is, a good file will be "resumed" -- that is, deleted and downloaded again, on hosts that do not support resume. FileZilla should be able to identify succesful downloads and do not try to resume them.

I'm using FileZilla under Windows 2000 (SP3). I try loging in to my server, I get the certificate pop up with all the correct details. According to the log below, it seems to change to my /home directory (which I have set under the option 'Default Remote Directory'), but then when it goes to list the files it dies. Check this out:

Status: Connecting to 192.168.1.15 ... Trace: FtpControlSocket.cpp(652): OnConnect(0) Status: Connected with 192.168.1.15. Waiting for welcome message... Trace: FtpControlSocket.cpp(527): OnReceive(0) Response: 220- Trace: FtpControlSocket.cpp(527): OnReceive(0) Response: 220- Vivid Communications Response: 220- Level 11 / 522 Flinders Lane Response: 220- Melbourne, Victoria Response: 220- Australia 3000 Response: 220- ph: +61 (03) 9629-3330 Response: 220- fax: +61 (03) 9629-6771 Response: 220- Response: 220- --- Response: 220- Warning: All changes to the pub Response: 220- folder are live - be careful! Response: 220- Response: 220- Response: 220 jackal.vivid.net.au FTP server (Version 6.4/OpenBSD/Linux-ftpd-0.17) ready. Command: AUTH SSL Trace: FtpControlSocket.cpp(527): OnReceive(0) Response: 334 AUTH SSL OK. Trace: AsyncSslSocket.cpp(871): SSL_connect:before/connect initialization Trace: AsyncSslSocket.cpp(871): SSL_connect:SSLv2/v3 write client hello A Trace: FtpControlSocket.cpp(527): OnReceive(0) Trace: AsyncSslSocket.cpp(871): SSL_connect:SSLv3 read server hello A Trace: AsyncSslSocket.cpp(871): SSL_connect:SSLv3 read server certificate A Trace: AsyncSslSocket.cpp(871): SSL_connect:SSLv3 read server done A Trace: AsyncSslSocket.cpp(871): SSL_connect:SSLv3 write client key exchange A Trace: AsyncSslSocket.cpp(871): SSL_connect:SSLv3 write change cipher spec A Trace: AsyncSslSocket.cpp(871): SSL_connect:SSLv3 write finished A Trace: AsyncSslSocket.cpp(871): SSL_connect:SSLv3 flush data Trace: FtpControlSocket.cpp(527): OnReceive(0) Trace: AsyncSslSocket.cpp(871): SSL_connect:SSLv3 read finished A Status: SSL connection established. Waiting for welcome message... Command: USER mm Trace: FtpControlSocket.cpp(527): OnReceive(0) Response: 331 Password required for mm. Command: PASS Trace: FtpControlSocket.cpp(527): OnReceive(0) Response: 230 User mm logged in. Status: Connected Trace: FtpControlSocket.cpp(2680): ResetOperation(1) Trace: FtpControlSocket.cpp(784): List(FALSE,0,"/home/","",1) Status: Retrieving directory listing... Command: CWD /home/ Trace: FtpControlSocket.cpp(527): OnReceive(0) Response: 250 CWD command successful. Trace: FtpControlSocket.cpp(784): List(FALSE,0,"","",0) Command: PWD Trace: FtpControlSocket.cpp(527): OnReceive(0) Response: 257 "/home" is current directory. Trace: FtpControlSocket.cpp(784): List(FALSE,0,"","",0) Command: PASV Trace: FtpControlSocket.cpp(527): OnReceive(0) Response: 227 Entering Passive Mode (192,168,1,15,128,92) Trace: FtpControlSocket.cpp(784): List(FALSE,0,"","",0) Command: TYPE A Trace: FtpControlSocket.cpp(527): OnReceive(0) Response: 200 Type set to A. Trace: FtpControlSocket.cpp(784): List(FALSE,0,"","",0) Command: LIST Trace: AsyncSslSocket.cpp(871): SSL_connect:before/connect initialization Trace: AsyncSslSocket.cpp(871): SSL_connect:SSLv2/v3 write client hello A Trace: TransferSocket.cpp(373): OnConnect(0) Trace: FtpControlSocket.cpp(527): OnReceive(0) Response: 150 Opening ASCII mode SSL data connection for /bin/ls. Trace: FtpControlSocket.cpp(784): List(FALSE,0,"","",0) Trace: FtpControlSocket.cpp(527): OnReceive(0) Response: 425 ftpd: SSL_accept DATA error error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number Response: : Success. Trace: FtpControlSocket.cpp(527): OnReceive(0) Trace: FtpControlSocket.cpp(784): List(FALSE,0,"","",0) Trace: FtpControlSocket.cpp(2680): ResetOperation(4) Trace: TransferSocket.cpp(844): Close() Error: Could not retrieve directory listing

I'm sure it isn't a server problem, because the 'ls' command works perfectly when using WinSCP2 over SSH2 and standard FTP (in exactly the same chrooted envorionemt).

It may be of relevance that SFTP support doesn't work with my server either in FileZilla, but that's in my next bug report.

The server that I am using is Gentoo 1.4.2.3 with the net-ftp/ftpd-0.17 (SSL-patched) netkit daemon.

Let me know if there is any more information I can give you to help nail this ASAP, because I'm going to have to recommend another client to my clients otherwise. :(

adam at vivid dot net dot au

FileZilla 2.1.3a dies using SFTP, even though WinSCP2 and gFTP work fine. A command from FileZilla is sent to the server that this daemon just doesn't like. I don't know what it is though. If this client supports OpenSSH 3.5p1 (the standard Gentoo e-build with scripts to chroot individual users), then it's a bug.

Status: Connecting to 192.168.1.15:22 ... Trace: FzSFtp.exe: FzSFtp started and initialized. Trace: SftpControlSocket.cpp(2113): OnConnect(0) Status: Connected with 192.168.1.15:22, initializing SFTP connection... Command: CONNECT mm@192.168.1.15:22 Trace: FzSFtp.exe: SSH.C(1890): Server version: SSH-1.99-OpenSSH_3.5p1 Trace: FzSFtp.exe: SSH.C(1926): We claim version: SSH-2.0-PuTTY-Local: Dec 6 2002 19:55:08 Trace: FzSFtp.exe: SSH.C(1928): Using SSH protocol version 2 Trace: SftpControlSocket.cpp(2352): OnReceive(0) Trace: FzSFtp.exe: SSH.C(3996): Doing Diffie-Hellman group exchange Trace: SftpControlSocket.cpp(2352): OnReceive(0) Trace: FzSFtp.exe: SSH.C(4024): Doing Diffie-Hellman key exchange Trace: SftpControlSocket.cpp(2352): OnReceive(0) Trace: FzSFtp.exe: SSH.C(4080): Host key fingerprint is: Trace: FzSFtp.exe: SSH.C(4081): ssh-rsa 1024 68:52:5d:42:c0:bb:ea:be:4e:62:28:22:74:55:04:a7 Trace: FzSFtp.exe: SSH.C(659): Initialised AES-256 client->server encryption Trace: FzSFtp.exe: SSH.C(659): Initialised AES-256 server->client encryption Trace: SftpControlSocket.cpp(2352): OnReceive(0) Trace: FzSFtp.exe: SSH.C(4781): Keyboard-interactive authentication refused Trace: FzSFtp.exe: SSH.C(5015): Sent password Trace: FzSFtp.exe: SSH.C(4464): Access granted Trace: FzSFtp.exe: SSH.C(5095): Opened channel for session Trace: SftpControlSocket.cpp(2352): OnReceive(0) Trace: FzSFtp.exe: SSH.C(5403): Started a shell/command Trace: SftpControlSocket.cpp(2352): OnReceive(0) Trace: FzSFtp.exe: SSH.C(5699): Server sent command exit status 127 Response: Fatal: unable to initialise SFTP: could not connect Trace: SftpControlSocket.cpp(2192): DoClose(0) Trace: SftpControlSocket.cpp(2219): ResetOperation(4100) Error: Unable to connect!

Any help is appreciated. Thanks.

adam at vivid dot net dot au

It works fine downloading into my intranet, but always stops just at 32Mb downloading files through a proxy.

Although [CTRL]+V does work in "Local Site" textbox (future combo box?) [CTRL]+C doesn't!

We are forced to use the mouse...

Please note that the Remote Site Combo box works perfectly...

Thanks.

At menu "Edición" (Edit): Import settings ---> Importar configuración

At menu "Transferencia" (Transfer): Manual transfer... ---> Transferencia manual...

At menu "Vista" (View): Show hidden files ---> Mostrar archivos ocultos Remote treeview ---> Explorador remoto de archivos

At menu "Cola" (Queue): Use multiple connections ---> Usar varias conexiones

At menu "Server": Menú title: Server ---> Servidor Change password ---> Cambiar contraseña Enter raw FTP command ---> Enviar orden directa FTP Copy URL to clipboard ---> Copiar URL al portapapeles

Some dialog boxes would be reported in a future bug ;-)

-- El defeKto 2000 <ed2k@…>

NTCMD_S:\Software\NetTools\FTP\FILEZI~1>file FileZilla_Server_0_8_0.exe FileZilla_Server_0_8_0.exe: extended DOS executable (.EXE)

NTCMD_S:\Software\NetTools\FTP\FILEZI~1>FileZilla_Serve r_0_8_0.exe This program cannot be run in DOS mode.

I'm using an Unix FTP Server. The directory structure looks like this :

/home/exploit /home/dev /home/EXPLOIT

Its impossible to access to /home/EXPLOIT after an access to /home/exploit !!!

Sorry for my english, just try it to understand me...

The .lnk files are not being resolved, whereas they were resolved in earlier versions.

Version 2.1.3 seems to be unable to resume files' upload to remote server.

First of all, I'm very appreciate for excellent ftp client software.

I'm using filezilla 2.1.3a. When I uploaded some files, I found file modification time is not displayed correctly. Filezilla seems to display UTC time, not local time.

File modification time is saved correctly, but displaying time seems to have problems.

My timezone is KST(GMT+0900) and filezilla display file modification time nine hours late.

It's better to display time according to local timezone, not UTC time.

It will be helpful to you. Bye.

I tried to use Filezilla with a my gss module (​https://sourceforge.net/projects/gssmod/) for proftpd 1.2.8rc2 from cvs and it seems that after the ADAT commands you issue immediatly a CWD command which isn't allowed. Filezilla then tries correctly to use the USER command and proftpd returns a "331 Password required" which can be in case of a successful ADAT a dummy password (The internal structure of proftpd always requires a password, although not necessary). But just here Filezilla closes the connection. I assume it doen't expect a 331 return code.

Markus

Status: Connecting to testserver.test.com ... Trace: ControlSocket.cpp(118): OnAsyncGetHostByName(0, 56, 15) Trace: FtpControlSocket.cpp(652): OnConnect(0) Status: Connected with testserver.test.com. Waiting for welcome message... Trace: FtpControlSocket.cpp(527): OnReceive(0) Response: 220 ProFTPD 1.2.8rc2 Server (ProFTPD Default Installation) [testserver.test.com] Trace: GSSApi.dll: GFtpDoAuth (452, "testserver.test.com", 1738637578, - 828276470, 14025606, 32768, 80, 16841580[0]) Trace: GSSApi.dll: Trying to authenticate to <ftp@…> Trace: GSSApi.dll: Status in line 871: 0, 0 Trace: GSSApi.dll: Status in line 901: 1, 0 Trace: GSSApi.dll: Status in line 901: 0, 0 Trace: GSSApi.dll: GSSAPI authentication succeeded Command: CWD . Trace: FtpControlSocket.cpp(527): OnReceive(0) Response: 530 Please login with USER and PASS Response: ShiW+sP47uBtpcnDilHqC4BNF6FlmUT8yZuxgJWxw8 Qcj6sTqeX6/aY+73060EA1/ifrB5F92zAI+Ubsg== Command: USER testuser Trace: FtpControlSocket.cpp(708): DoClose(4) Trace: FtpControlSocket.cpp(2680): ResetOperation (4100) Error: Unable to connect!

The return value of CAsyncSocketEx::IOCtl() should be inverted. CAsyncSocketEx::IOCtl() calls ioctlsocket() which returns 0 if success, and SOCKET_ERROR if not success.

CAsyncSocketEx::IOCtl() therefore should return TRUE if ioctlsocket() returns 0. This is not the case at the moment. This causes problems in WindowProc() of AsyncSocketEx.cpp when processing the FD_READ event.

A correct implementation of IOCtl() would be:

BOOL CAsyncSocketEx::IOCtl( long lCommand, DWORD* lpArgument ) {

return (SOCKET_ERROR != ioctlsocket

(m_SocketData.hSocket, lCommand, lpArgument)); }

in case numsent < numread, the remainder of the buffer is copied to the beginning of the buffer. However, the code as it is, will miss one byte, due to the incorrect +1. This causes corrupt files on the receiving client. Isn't it possible to use memcpy? or is this a problem as the two ranges overlap?

else if (numsent<numread) { This should not happen, but handle it in case it happens

why shouldn't this happen? send() is not garantueed

to send the specified

number of bytes, so this might very well happen, as

it most certainly

does on the XBOX for (int i=0;i<(numread-numsent);i++) {

m_pBuffer[i]=m_pBuffer[i+numsent+1]; m_pBuffer[i]=m_pBuffer[i+numsent];

}

m_nBufferPos=numread-numsent;

}

Using v2.1.3a:

Not using multiple connections.

Reproduce:

1. Connect to site
2. Find directory to download
3. Right click - "Download As"
4. Enter another username/password and hit ok
5. Select Process Queue

Expected Results: New connection attempt under entered username/password should proceed, if the connection is not made, the client should attempt to reconnect x number of times after waiting for y seconds, as specified in the settings dialogue.

Actual Results: New connection attempt under entered username/password.

If connection is not made reconnection is attempted

IMMEDIATELY. Very frustrating for ftp servers with auto-ban after x number of failed connections.

The Filezilla server requires a welcome message or it'll crash...tested it with a standard install...and added one simple user account... However if you have already succesfully logged in with a message currently, you'll have to reboot to see this for yourself...I'm absolutely sure this is a reason why it was failing for me... to filezilla supporters-> keep up the great work and happy new year! ..:-)

jagg

I have a pentium 233 running windows 98 SE. I do not have microsoft internet sharing installed.

When wingate server version five is turned on, filezilla will freeze the system (except for sometimes allowing Control-alt-delete) and it will do it 8 or 9 times out of 10.

It does not seem to matter whether my virus scanner is on or off although for some reason, the virus scanner causes the system to freeze for several seconds while loading FileZilla, Gnucleus, WinMX, and several other programs which I have forgotten the names of.

Also, when I restart, I get file allocation errors in the wingate log files.

I have a pentium 233 running windows 98 SE. I do not have microsoft internet sharing installed.

When wingate server version five is turned on, filezilla will freeze the system (except for sometimes allowing Control-alt-delete) and it will do it 8 or 9 times out of 10.

It does not seem to matter whether my virus scanner is on or off although for some reason, the virus scanner causes the system to freeze for several seconds while loading FileZilla, Gnucleus, WinMX, and several other programs which I have forgotten the names of.

Also, when I restart, I get file allocation errors in the wingate log files.

Mix up lowercase & uppercase. There is a certain site contains two directories:"downloads" & "Downloads". I first entered download. & then, I find I not manage entering "Downloads". FileZilla thinks "Downloads" is just "downloads" and give me the content of it. Refresh does not work at all.

I am connected to a FTP-Server ( OSE-System). The trace of the inital list-command shows a list of directories and files, but the directory-view says

< leeres Verzeichnis >

It looks like fillezilla has problems to display the results of the server.

Using 0.82 of Server. Haad to install from scratch having removed previous version as it never connected to server and always crashed. On reboot and re-install of 0.82 worked fine for a while, but now just starts up as before and just consumes 99% of CPU constantly regardless of priority set.

After renaming the DNS name of a server, I can no longer connect to it via SFTP. I suspect that the fzsftp backend is detecting a potential spoof attack because of the DNS change.

I do not know where the SSH equivalent of 'known_hosts' is being stored, so I can't edit it or delete it. It doesn't appear to be in filezilla.xml, and I'm not sure what to look for in the windows registry.

Korey Renner renner@…

FileZilla hangs when start browsing a Microsoft Distributed File System in Local Site File Tree.

​http://www.microsoft.com/windows2000/techinfo/howitwo rks/fileandprint/dfsnew.asp

submitted by Andreas.Heidoetting@…

FileZilla Server: thread.cpp does not contain implementation of DWORD SuspendThread();

In XP SP1 (I don't know if this occurs in other operating systems), I have filezilla set to remember the Window Size and position of the program and have it maximised.

Now sometimes when I close and open the program, the bar which separates the folder structures and the queue constantly moves up bit by bit.

If I close the program and relaunch it, it moves up again and so on and so on.

Tryed to transfer a 2,89 GB folder. The folder contains: 41 264 Files, 2 117 Folders

FileZilla starts to build the que but it froze after 30 sec.

The administrative tool at startup displays a "Connect to server" windows, there are two buttons, one is "Ok", the other displays "Abbrechen", what does it mean?

keepalive system doesn't work on sftp connections with version 2.14 (didn't work in 2.13 either)

not sure wether or not it works on normal ftp connections since i don't use them.

local system: windows 2000 remote system: mandrake linux / openssh-3.4p1

I had to rollback to server version 0.7.4a because the new version dont send the directory if the home directory is a network drive.

When there are 2 directories with the same name but with a different case (ex: "gallery" and "Gallery"), if the directory cache is activated, once you've accessed one of these two directories and you try to access the other one, you see the contents of the directory you accessed first.

mguiller@…

When entering disk letter in the local site input field (e:, e:\, d:, d:\ etc) I'm receiving an error 'The path you entered could not be found'. It's interesting, that when you are entering the name of currently active disk (which folder is displayed in Local site panel) - there is no error, but the folders are still not changed.

This bug is reproducible in the two lates FZ releases: 2.1.4, 2.1.4a.

Thank you.

VK

When typing c: or c:\ in the Local Site edit there's an error 'The path you entered could not be found!'

Entering a subfolder (c:\folder) works correctly

Using Pageant to manage my public key I can use PSFTP to sftp to a site without login. FileZilla gives me no way to use my public key to do this.

After creating an ftp site with a remote default directory specified in site manager, I am unable to change that default directory. I haven't checked any other settings besides that one.

I realized that I was simply unable to remove the leading hash mark. My ftp site doesn't like it, so I am unable to specify any default directory at all.

I have tried to use FileZila to connect a secureftp server. After entering the password, it can get connected and list the directory.

However, apart from list directory, I cannot do anything like cd, get, put,

I am not sure if this is a but or a feature. I always sort by date for both the local and the server. I also adjust the widths of the columns to the way I like them. When I close the program, it goes back to the defaults. Under FileZilla Options I have checked Remember last used configuration, but it does not. I also have checked the box for Remember column width in details style. Last I have to check the box to overwrite if newer every time I restart the program. I would be nice if it could remember this setting.

Excellent program.

Thanks Kris

I am using Version 2.1.4b