Custom Query (4044 matches)
Results (2201 - 2300 of 4044)
Ticket | Summary | Owner | Priority | Resolution | Created | Modified |
---|---|---|---|---|---|---|
#4274 | Navigating to drive list through .. filelist item | normal | fixed | 15 years | 15 years | |
Description |
I have 3 disk attached to my computer. In the old release I can press \.. until showme all disk of my computer. In this version I just go until the disk root of my local folder. Ex. I have a C, D and L Disk. My start local folder is in the C. So in this version when press \.. a just can go to C:\ in the last version when I pressed \.. I go to see C:\ D:\ or L:\ disk. |
|||||
#4412 | Navigation Bar no longer viewable after upgrade to 3.2.3.1 | low | rejected | 15 years | 15 years | |
Description |
I upgraded to 3.2.3.1 yesterday and then uploaded a page. My navigation bar is no longer viewable. I find that even when I reload a page with a previously viewable navigation bar (and have not made any edits to the page), that page is also without a navigation bar. Have you heard of this problem before? I couldn't find anything in your tickets or wiki. I am working on a site which was constructed using FrontPage (I apologize) and has .asp extensions. |
|||||
#4492 | Navigation Bars not on webpage | normal | rejected | 15 years | 15 years | |
Description |
Navigation bars are not showing up on webpage. I am using internet explorer 8 to view and none of the navigation bars are there. I am using microsoft publisher 2007 to create webpages and Aplus.net as my server. |
|||||
#9696 | Navigation to local files list by keybord - problem | normal | outdated | 10 years | 10 years | |
Description |
This is the little problem but most required. 1) i selected local files 2) press "TAB" 2 times 3) now i am in list of files on FTP 4) Select files/dir of ftp 5) now go back by press "SHIFT + TAB" to local files list 6) when focus go to this local files list it set focus on local dir list where selected MY COMPUTER and drives list in files list box. there should display on got focus opened files list which was displayed before got focus. after i update file zila this is happening. Thank You |
|||||
#9443 | Need To log On twice | normal | outdated | 10 years | 9 years | |
Description |
When logging into my work server I need to log in twice. The first time it always hangs at the:- "command Type 1" When logging in again it gives me the option of cancelling the current log in and retrying. When I select this it then completes the log in and it works fine. This fault has been apparent since an Filezilla upgrade some months back. |
|||||
#3334 | Need to cancel file rename if directory listing changes | normal | 16 years | 16 years | ||
Description |
http://forum.filezilla-project.org/viewtopic.php?f=3&t=64&st=0&sk=t&sd=a&start=690#p16331 http://www.menelon.ee/private/mozilla/filezilla_bug.png See the screenshot. I renamed a file remotely (F2), switced windows, server disconnected and I got this. Only after I closed the rename dialog I was able to reconnect to any server. |
|||||
#12569 | Neen help as FTP not working | critical | worksforme | 3 years | 3 years | |
Description |
hello team, i am a filezilla user, recently i update the software to FileZilla_3.56.2 , after doing this FTP not working. Status: Connecting to 162.241.85.69:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Command: USER giveuc2t Response: 331 User giveuc2t OK. Password required Command: PASS Response: 530 Login authentication failed Error: Critical error: Could not connect to server for every FTP account same happening, please help me to connect FTP. One more thing left local path folders & file not showing. |
|||||
#11324 | Net speed is good. It is more then 8 Mbps but not connecting to server | low | rejected | 7 years | 7 years | |
Description |
Hi, I have issue in connecting with FTP host even internet speed is very good. I`m getting below errors... Status: Resolving address of ftp.vedamonline.com Status: Connecting to 4x.xx.xx.xxx:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of ftp.vedamonline.com Status: Connecting to 4x.xx.xx.xxx:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: AUTH TLS Response: 234 AUTH command ok. Expecting TLS Negotiation. Status: Initializing TLS... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server |
|||||
#3843 | Networkdrive not full listed | normal | rejected | 16 years | 16 years | |
Description |
network-drives are not full listed, when starting FileZilla an drives not used before. Windows XP SP2 Steps to reproduce:
I hope you can fix the problem. |
|||||
#9660 | Never Check for Updates not working | normal | worksforme | 10 years | 10 years | |
Description |
When I start the application, and it completely ignores my set option in settings of "Check for FileZilla updates automatically:" "Never". It then goes on to find an update. What's worse is that it alerts me every time I open the application, even redownloading the update if I go to Downloads and delete it. This seems like a pretty major bug. It's been happening for years, but I never got this annoyed with it before. Any idea when this can be fixed? Right now I'm in triage mode and have that program firewall blocked to the filezilla site it tries to reach for update information, but that's totally unnecessary. |
|||||
#10951 | Never Check for Updates not working | normal | worksforme | 8 years | 8 years | |
Description |
Application is set to "Never" check for updates as I don't want automatic update checking, I want manual. Version has not yet mattered in this issue. Please advise. FileZilla Client Version: 3.21.0 Build information:
Linked against:
Operating system:
|
|||||
#4620 | New Crash Bug in 3.2.6 for OSX (Intel) | normal | fixed | 15 years | 15 years | |
Description |
Dragging a file from Finder into the file directory of the remote side (right side of the FileZilla Window) causes Filezilla to crash. This is new behavior in 3.2.6. |
|||||
#4411 | New Filezilla crashes repeatedly | normal | outdated | 15 years | 12 years | |
Description |
Microsoft report Win XP <?xml version="1.0" encoding="UTF-16"?> <DATABASE> <EXE NAME="filezilla.exe" FILTER="GRABMI_FILTER_PRIVACY">
</EXE> <EXE NAME="msvcrt.dll" FILTER="GRABMI_FILTER_THISFILEONLY">
</EXE> <EXE NAME="kernel32.dll" FILTER="GRABMI_FILTER_THISFILEONLY">
</EXE> </DATABASE> |
|||||
#10169 | New Filezilla issues | normal | rejected | 9 years | 9 years | |
Description |
My New FileZilla version 3.10.0.2 every time asking for accept connection is secure while my server is already secure. and file uploading is also slow in new version |
|||||
#10408 | New Update Connection issue | low | duplicate | 9 years | 9 years | |
Description |
getting this eror after this new update, with every ftp request. Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listing |
|||||
#5579 | New Update not working on my Laptop | normal | worksforme | 14 years | 14 years | |
Description |
I have your software on my main desktop computer, I did not update it to your current version when requested to, and it still works and uploads to my website ... www.peacerecord.com. I updated the FileZilla version on my Laptop computer to the current version when it requested me to and now it cannot connect to my website for uploading. What must I do ... are some of the log in parameters changed in your new updated version of File Zilla? |
|||||
#12605 | New Version Does Not Connect to Server | low | fixed | 2 years | 2 years | |
Description |
I downloaded and installed the update, 3.57.0. Now it will not connect when I enter command-R. Says TLS connection is established, enters the password (which has not changed), then times out. I restarted, but with same problem. Other FTP software works just fine. Only change is the new FileZilla. |
|||||
#9825 | New Versions don't install when running installer | normal | fixed | 10 years | 10 years | |
Description |
When I open FileZilla, A dialog opens, letting me know version 3.9.0.5 is available. I click 'Install new version', It downloads and unzips a .tar.bz2. And then tells me a new version is available. When I click 'Install new version', It downloads and unzips a .tar.bz2. And then tells me a new version is available. When I click 'Install new version', It downloads and unzips a .tar.bz2. And then tells me a new version is available. When I click ... |
|||||
#8915 | New Windows Update Broke 3.7.3 | high | outdated | 11 years | 10 years | |
Description |
The new windows update (security fixes only) on 9/10/13 "broke" my filezilla. When I right click a file to view or do anything with, it produces an error. Did a system restore before update and Filezilla works again just fine. Sorry that I didn't write down the error message before system restore :( but I know the update messed up 3.7.3 that I use. |
|||||
#10071 | New file upload permissions | high | duplicate | 9 years | 9 years | |
Description |
Upgraded to 3.10.0.1 New files uploaded to server via SFPT now get no permissions where they used to be given default folder permissions. |
|||||
#3356 | New files not downloaded if directory listing is cached | normal | 16 years | 16 years | ||
Description |
When transferring a directory from the remote site to the local filesystem --
PRODUCE ERROR
(The download may have to include a subfolder with the new file(s); I don't know.) FIX All folders and subdirectories being transferred should be re-LISTED instead of going on a cache. The cached lookup was probably 18 hours old in my case. |
|||||
#10202 | New tab overlays old tab; cannot change between them | normal | fixed | 9 years | 9 years | |
Description |
I connect to a server, then establish a connection to a different server in a new tab. (See screenshot 1.) Instead of creating a new tab alongside the old one, it creates a new screen that overlays the old one, but is slightly smaller. There is no way to switch between the two tabs. (See screenshot 2.) This has been a problem since FileZilla version 3.9.0.6. I am now using FileZilla version 3.10.1.1, and the problem remains. Original forum discussion: https://forum.filezilla-project.org/viewtopic.php?f=2&t=34409 |
|||||
#5553 | New update is not working great. | high | worksforme | 14 years | 14 years | |
Description |
Hi I just upgraded my FileZilla to version 3.3.4.1 and now when I try to download files I get a "Critical file transfer error" It never happened with my old version. What could be wrong? Thanks |
|||||
#9823 | New update removes Quick Connect data | normal | outdated | 10 years | 7 years | |
Description |
After installing a new update 3.9.0.5 my quick connect data is lost and I have to enter all the data and passwords etc again. |
|||||
#10768 | New update will not FTP images/create new file. | normal | rejected | 8 years | 8 years | |
Description |
Command: PASV Response: 227 Entering Passive Mode (64,71,35,56,164,131). Command: STOR CPI composite.png Response: 553 Could not create file. Error: Critical file transfer error Status: Disconnected from server Used FZ for years. Newest update, windows 10, HO laptop one year old. FTP everyday-rarely an issue. Problem started right after your new update. REgular update file FTP fine but creating new image file (about 5 per day) no longer works. Have rebooted, done computer scan for malware, etc. No problems with servers that I can see. |
|||||
#12560 | New version FileZilla_3.56.0_win64 causes GnuTLS error | normal | rejected | 3 years | 3 years | |
Description |
Connection to host works fine with FileZilla_3.52.2_win64. On installation of 3.56.0 connection fails with "GnuTLS error -8: A packet with illegal or unsupported version was received." Reinstalling 3.52.2 restores ability to connect. |
|||||
#11685 | New version chrash at install | high | fixed | 6 years | 6 years | |
Description |
The app keep telling me there is a new version, when downloading and install my Imac (10.11.6) chrash every time. I want to disable new version or have a fixed version. Attach chrash report |
|||||
#10024 | New version doesn't retrieve directory listing | normal | duplicate | 9 years | 9 years | |
Description |
Since I upgraded to the latest version, I can no longer access my FTP site. It says: Status: Resolving address of ftp.XXXX.com Status: Connecting to XX.XXX.XXX.XXX:XX... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing of "/public_html/XXXX/XXXXX"... Command: CWD /public_html/ Response: 250 OK. Current directory is /public_html/XXXX/XXXXX Command: PWD Response: 257 "/public_html/XXXX/XXXXX" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (XX,XXX,XXX,XXX,XXX,XX) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing |
|||||
#4373 | New version locks up... | normal | rejected | 15 years | 15 years | |
Description |
I ran an automated update and now have version 3.2.3.1, build date 2009-03-25, I have a PC with XP. I try to "Quick Connect" and two lines show up int the uppermost window followed by "...." and nothing else happens. A click anywhere is followed by the hourglass cursor and the program in "not responding" mode. I have to force the program to quit. Same issue three times in a row. I finally clicked the "Help" menu first to eventually get to posting this bug report.... I don't have any other reports to attach... Can I have the previous version back, please? |
|||||
#12365 | New version of FileZilla does not preserve file timestamps | high | fixed | 3 years | 3 years | |
Description |
After installing the latest version of FileZilla client, the file timestamp data is no longer preserved on the transferred files. Verified that the option is still set in the transfer options. |
|||||
#10059 | New version of Filezilla give unknown certificate error for Dlink | critical | fixed | 9 years | 9 years | |
Description |
When I try to connect with my personal ftp server it give me a error that the certificate expired 7/16/2013 and will not allow me to trust the certificate and give me errors when I connect so I can no longer connect with the FTP server. I have been using this server for years on a daily basis and have never seen this error. |
|||||
#10180 | New version times out at attempt to connect with main directory of website | normal | duplicate | 9 years | 9 years | |
Description |
That's really it. At first, I just thought maybe something was wrong on the website. So to see, I just uninstalled the latest version (FileZilla_3.10.0.2_win32-setup.exe or whatever was the latest as of a day or two ago), and then reinstalled a previous version (which does not have the problem), which is: FileZilla Client Version: 3.8.0 Build information:
Linked against:
Operating system:
Thanks! Roger |
|||||
#9655 | New versions download to wrong directory | low | duplicate | 10 years | 10 years | |
Description |
The last 2 versions of FileZilla have downloaded to the wrong directory. (3.8.1 & 3.9.0) When a new version is available, I get a dialog stating that a new version is available and has been downloaded to my Downloads folder. This is not the case. Instead the versions are being downloaded to my Documents folder. I would expect the archive to be downloaded to my Downloads folder, since this is where everything else ends up. (preferred) Or I would expect the dialog to tell me that the downloads are in my Documents folder. |
|||||
#8714 | Newer version of Filezilla shows truncated filename. | normal | invalid | 11 years | 11 years | |
Description |
Good afternoon, I am using Filezilla 2.2.27 and looking into a folder containing the filename pay_by_day_KD.pdf. I have a client who is using Filezilla 3.1.3. When they look into the exact same folder, the same file is shown with the filename "PAY_~JVF.PDF" Do you know what could be causing this discrepancy in the filename between our two versions? Thanks for your time, -Scott |
|||||
#1386 | No " LIST" before downloading a folder | normal | 16 years | 16 years | ||
Description |
Maybe it's not a bug, and you design FileZilla like that for performance. Firstly, I went into a folder "/testfolder", there was only 1 file "a.txt". Then I go back into the root folder "/". After some minutes, someone uploaded a file "b.txt" into the folder "/testfolder", and now there were 2 files(a.txt and b.txt) in "/testfolder". Secondly, I downloaded the folder "/testfolder" by dragging it to my local disk. FileZilla downloaded "a.txt" only. Because FileZilla didn't execute "LIST" before download, it didn't known "b.txt" existed now. |
|||||
#8849 | No Connection when connecting through a Win7-PC with "share internet connection" | normal | wontfix | 11 years | 10 years | |
Description |
Setup-desciption: Internet= [Cisco WLan-distribution-system (EAP)] =WLAN= [Win7-GW-PC] =LAN= [Internal-LAN; Work-PC(Win7)]... Appartmenthouse-Installation with Cisco-Routers, authentication: Enterprise-AES-EAP The Win7-GW-PC connects to the Cisco-Router through WLAN and is configured to share the internet-connection of the WLAN-interface through a second (LAN-) interface to the internal LAN A PC connected to this LAN can do everything, even DL via Firefox-Browser like: "ftp://userid:pw@filezilla-server-address.net" No connection can be established to the same filezilla-server using the filezilla-client. It stalls at the "211-Features" response: ..... ..... ..... Trace: CFtpControlSocket::SendNextCommand() Command: FEAT Trace: CFtpControlSocket::OnReceive() Response: 211-Features: Trace: CRealControlSocket::OnClose(10053) Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Error: Could not connect to server Status: Waiting to retry... Status: Delaying connection for 1 second due to previously failed connection attempt... Status: Resolving address of makroma-one.net Status: Connecting to 91.67.250.131:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220 Welcome to MAKROMA ! Be aware: This is not a public server! If you are not Trace: CFtpControlSocket::SendNextCommand() Command: USER makromax Trace: CFtpControlSocket::OnReceive() Response: 331 Password required for makromax Trace: CFtpControlSocket::SendNextCommand() Command: PASS Trace: CFtpControlSocket::OnReceive() Response: 230 Logged on Trace: CFtpControlSocket::SendNextCommand() Command: FEAT Trace: CFtpControlSocket::OnReceive() Response: 211-Features: (Using filezilla-client on the [Win7-GW-PC] itself works fine.) Hint: After setting debug-mode to 3 for testing and a restarting the filezilla-client just one time the directory was displayed correctly, but that could not be reproduced yet. This might have been a coincidence but leads me to the assumption that timing might be an issue here. Mike Knife |
|||||
#10673 | No Download Option | low | rejected | 9 years | 9 years | |
Description |
Date: 10/8/2015 user: odesk host: edi.csnstores.com OS: Windows 7 x86 Ultimate Latest ver of Filezilla Description: The 'Download' option whenever I right click a folder/file the 'Download' option is grayed out. |
|||||
#9378 | No Failed Transfers showing | normal | outdated | 10 years | 7 years | |
Description |
FileZilla Client Version: 3.7.4.1 Build information:
Linked against:
Operating system:
|
|||||
#1086 | No Login with special chars in password | normal | 18 years | 18 years | ||
Description |
I am not able to connect to a server with v2.2.23a if I use a password with chars like ÄÖÜ. Everything was fine before I updatet to v2.2.23a and is fine if I downgrade to v2.2.23 |
|||||
#7731 | No SSH Agent login after upgrade to 3.5.1 | normal | fixed | 13 years | 9 years | |
Description |
After upgrading to v3.5.1, SSH key authentication via agent no longer works. FileZilla sends blank password instead of using agent and reports "Authentication Failure." Downgrading to 3.5.0 fixed the issue. |
|||||
#11076 | No Successful Notification | normal | worksforme | 7 years | 7 years | |
Description |
Dear FileZilla Team, I am using FileZilla for backup my sites. From the last update stop the notification to appear when finish to download HTML root file (Successful). I can't know if all website files download. Please advise. Daniel Brown |
|||||
#3660 | No Successful Transfer listing | normal | 16 years | 16 years | ||
Description |
Successful transfers are not listed nor enumerated. Version 3.1.0.1 |
|||||
#4404 | No TLS-Encrypted connection possible | low | rejected | 15 years | 15 years | |
Description |
I have configured my ProFTPD correct for working behind a firewall. So MasqueradeAddress and PassivePorts is set. Also a normal not encrypted connection is working in pasv-mode without any problems. But using FTPES with TLS-Encryption always failed. There are several descriptions that this is a known bug and should be fixed in future Filezilla-versions. But now i am using a "future-version" 3.2.3.1 and it is still not working. :-( Here the output from the connection: ==================================== Status: Auflösen der IP-Adresse für mydomain.mydyn.de Status: Verbinde mit 84.60.43.26:21... Status: Verbindung hergestellt, warte auf Willkommensnachricht... Antwort: 220 FTP server ready. Befehl: AUTH TLS Antwort: 234 AUTH TLS successful Status: Initialisiere TLS... Status: Überprüfe Zertifikat... Befehl: USER intern Status: TLS/SSL-Verbindung hergestellt. Antwort: 331 Password required for intern. Befehl: PASS Antwort: 230 User intern logged in. Befehl: PBSZ 0 Antwort: 200 PBSZ 0 successful Befehl: PROT P Antwort: 200 Protection set to Private Status: Verbunden Status: Empfange Verzeichnisinhalt... Befehl: PWD Antwort: 257 "/" is current directory. Befehl: TYPE I Antwort: 200 Type set to I Befehl: PASV Antwort: 227 Entering Passive Mode (192,168,1,3,53,66). Status: Vom Server gesendete Adresse für den Passiv-Modus ist nicht routingfähig. Benutze stattdessen die Serveradresse. Befehl: LIST Antwort: 150 Opening ASCII mode data connection for file list Status: Server hat die TLS-Verbindung nicht ordnungsgemäß geschlossen Fehler: Could not read from transfer socket: ECONNABORTED - Connection aborted Antwort: 226 Transfer complete. Fehler: Verzeichnisinhalt konnte nicht empfangen werden |
|||||
#1170 | No Upload possible, if no Permision to "LIST" | normal | 18 years | 18 years | ||
Description |
Filezilla Client (2.2.5) does not react to "STOR"- command, if the user has no permision to "LIST"- command. I'l append a screenshot of the server-settings. With any ohter FTP-Client there is no problem. Here ist the client-log: --- Status: Verbinden mit localhost... Status: Verbunden mit localhost. Warten auf Willkommens-Meldung... Antwort: 220-FileZilla Server version 0.9.11 beta Antwort: 220-written by Tim Kosse (Tim.Kosse@…) Antwort: 220 Please visit http://sourceforge.net/projects/filezilla/ Befehl: USER upload_only Antwort: 331 Password required for upload_only Befehl: PASS * Antwort: 230 Logged on Befehl: SYST Antwort: 215 UNIX emulated by FileZilla Befehl: FEAT Antwort: 211-Features: Antwort: MDTM Antwort: REST STREAM Antwort: SIZE Antwort: MLST type*;size*;modify*; Antwort: 211 End Status: Verbindung hergestellt Status: Verzeichnisinhalt wird abgeholt... Befehl: PWD Antwort: 257 "/" is current directory. Befehl: TYPE A Antwort: 200 Type set to A Befehl: PASV Antwort: 227 Entering Passive Mode (127,0,0,1,8,11) Befehl: LIST Antwort: 550 Permission denied. Fehler: Dateiliste konnte nicht empfangen werden --- |
|||||
#4164 | No View of Remote or Local Files | low | worksforme | 15 years | 15 years | |
Description |
I can't see my remote or local files since I updated to version 3.20. Thanks, Rebecca Beasley |
|||||
#966 | No Way To Use SSH with Private/Public Key | normal | 19 years | 19 years | ||
Description |
Running latest version and there doesn't appear to be support for SSH with private/public key. You can only use passwords for SSH. |
|||||
#9818 | No accepting latest update 3.9.0.3 (2014-08-13) unless i run it in Administrator mode | normal | invalid | 10 years | 9 years | |
Description |
Dear Sirs, Filezilla seems to install the update in normal operating mode but every time i close the app and then open it again it want's to upgrade to version current. this installation is accepted for the duration of the usage but when the program is closed and opened again the update is no longer active. Although, when you run it in Admin mode it works well. PS; you guys are really kidding when you have the reams and reams of information how to submit a fault report? Do you really think people are going to read all that to fix a fault? It's easier to get a different product.... Please consider. Copy of Updte confirm; FileZilla Client Version: 3.9.0.3 Build information:
Linked against:
Operating system:
|
|||||
#9819 | No accepting latest update 3.9.0.3 (2014-08-13) unless i run it in Administrator mode | normal | duplicate | 10 years | 10 years | |
Description |
Dear Sirs, Filezilla seems to install the update in normal operating mode but every time i close the app and then open it again it want's to upgrade to version current. this installation is accepted for the duration of the usage but when the program is closed and opened again the update is no longer active. Although, when you run it in Admin mode it works well. PS; you guys are really kidding when you have the reams and reams of information how to submit a fault report? Do you really think people are going to read all that to fix a fault? It's easier to get a different product.... Please consider. Copy of Updte confirm; FileZilla Client Version: 3.9.0.3 Build information:
Linked against:
Operating system:
|
|||||
#3272 | No confirm for delete in folder view | normal | 17 years | 17 years | ||
Description |
If you try to delete a folder by right click -> delete in the remote folder window (e.g. the upper right) it won't ask for confirmation. If you do the same in the normal windows (e.g lower right) FileZilla asks if you really want to delete the file/folder(s). This happens in FileZilla 3.0.0 and 3.0.1 on Ubuntu GNU/Linux. I haven't tested it on other versions/platforms. |
|||||
#10129 | No connection possible | normal | duplicate | 9 years | 9 years | |
Description |
Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (46,249,54,133,138,49). Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing |
|||||
#8761 | No connection to any site after today's update | high | invalid | 11 years | 11 years | |
Description |
I took the update 3.7.1, build date 2013-06-18 It is not connecting to any site. I have several. I have not changed any configuration. They ALL worked the last time I used FileZilla (prior version) which was yesterday. |
|||||
#5331 | No connetion to Server SFTP with non-ASCII password | normal | worksforme | 14 years | 14 years | |
Description |
Status: Verbinde mit * Antwort: fzSftp started Befehl: open "" 22 Befehl: Pass: * Fehler: Authentifizierung fehlgeschlagen. Fehler: Kritischer Fehler Fehler: Herstellen der Verbindung zum Server fehlgeschlagen it is not Possible to connect to the server. The pw is like: aAa!1%_sCh9151u64!"$§%46(!(=ScK21bRs65)or.!es$5084450 The Server OS: Freebsd 7.1 Force UTF-8 does not help. |
|||||
#12251 | No counter anymore on Tabs "Failed/Successful transfers" | normal | worksforme | 4 years | 4 years | |
Description |
Since a couple of versions the counter and log of said tabs do not work anymore. FileZilla Client Version: 3.49.1 Build information:
Linked against:
Operating system:
|
|||||
#12284 | No counter anymore on Tabs "Failed/Successful transfers" - screenshot | normal | duplicate | 4 years | 4 years | |
Description |
see https://trac.filezilla-project.org/ticket/12251#comment:1 |
|||||
#4593 | No directory listing from VxWorks in Vista | normal | outdated | 15 years | 10 years | |
Description |
Running Filezilla client 3.2.5, I cannot get a directory listing from certain VxWorks servers in Vista. The servers are embedded in a home controller (AMX NetLinx, to be precise) and are running VxWorks 5.5.1. Here is a copy of the exchange on my Vista machine: Status: Connection established, waiting for welcome message... Response: 220 VxWorks (VxWorks5.5.1) FTP server ready Command: USER administrator Response: 331 Password required Command: PASS Response: 230 User logged in Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 Current directory is "doc:user" Error: Failed to retrieve directory listing Passive or active does not matter, and it is not a timeout; the failure comes immediately. On the same network, the same connection, the same router, and an identical setup, but on a machine running XP, the listing and all other operations are fine. The problem is only with my machine running Vista. |
|||||
#3882 | No directory tree on reconnect after deleting directory via shell | normal | fixed | 16 years | 16 years | |
Description |
FileZilla 3.1.4-rc1 1) Open FTP connection 2) Change into any directory 3) Disconnect 4) Delete that directory on the server via shell 5) Use reconnect button Of course, FileZilla shows the error as expected ("Failed to retrieve directory listing"), but no directory tree is shown and so I can´t do anything. Therefore, I propose the following in case the last used directory cannot be found:
Lars |
|||||
#10388 | No file overwrite confirmation on file drag drop from folder | normal | duplicate | 9 years | 9 years | |
Description |
let say i have file "a.txt" in server folder "A" and i have file "a.txt" in server folder "A\B" if i drag and drop file from server folder B to server folder ".." (top most), then file will be moved to folder A without confirmation. |
|||||
#4850 | No file-list refresh in local window | normal | duplicate | 15 years | 14 years | |
Description |
The only way to refresh your local view seems to be pressing F5. When you're dragging files or folders to the Filezilla local window its contents are refreshed regularly. Now add a file to or rename a file to this directory using your explorer (outside Filezilla but while Filezilla is running) Filezilla's local window doesn't get aware of any of these changes. Is there really no communication between Filezilla and the OS for an automatic refresh known from many other applications? |
|||||
#9887 | No files are showing | high | outdated | 10 years | 7 years | |
Description |
There are no images or files showing up in either the local or remote host. This happened after updating to the latest version of 3.9.0.5 |
|||||
#7838 | No files showing in FTP | high | outdated | 12 years | 12 years | |
Description |
Unable to view any files in the server. Each folder shows a question mark. When viewed in a different FTP software, it will show all the existing files, but not with FileZilla software. Need problems fixed. |
|||||
#7425 | No horizontal scrolling on File Browsers | normal | outdated | 13 years | 11 years | |
Description |
Cannot horizontally scroll, only vertical. |
|||||
#847 | No keep alive over SOCKS5 proxy | normal | 19 years | 16 years | ||
Description |
After getting a tcp capture from both sides of the proxy, it is clear that the FTP control session is timing out on the proxy due to inactivity. This causes the ftp server to shut down the FTP data session. I have verified that Enable the Keep Alive System box is checked, but there is no evidence of traffic being sent to the proxy over the control session once the data transmission has started. |
|||||
#4297 | No local directory tree for network file server | normal | outdated | 15 years | 11 years | |
Description |
When I access my Terastation network file server in FileZilla, using a network address of the type |
|||||
#10641 | No longer able to connect after latest update | normal | rejected | 9 years | 9 years | |
Description |
I've been using FileZilla very happily for quite some time but since I've run the update today I can no longer connect to one of my servers. When I first tried to it came up with a warning message for me to check over server information (screenshot attached) which I said 'ok' to, then when I've gone to connect via site manager it just hangs, saying the site name at the top of FileZilla but "Not connected to any server" in the right hand pane. A colleague who's not run the update yet is still able to connect fine so I don't think it's an issue with our server. |
|||||
#1418 | No network drive mapping | normal | 16 years | 16 years | ||
Description |
Fz 3.0.11.1 does not map my network drives; XP Prof. SP2 |
|||||
#4979 | No password asked on Server->Reconnect (Ctrl + R) | blocker | worksforme | 14 years | 14 years | |
Description |
I connect to a FTP via "Quick Connect" or using the "Site Manager" (in Spanish "Conexión rápida" and "Gestor de Sitios", respectively), then disconnect and close FileZilla and open FileZilla again, pressing Ctrl + R automatically reconnects to the last ftp server, without asking password. I have not told filezilla to save any password, nor did in the past. I tried to Quick Connect to a server I've never connected in the past, and then closing, opening and reconnecting still did the login without password. If I don't have told explicitly to do so, FileZilla should not remember any password. So, even at 'Reconnect', FileZilla should ask me for the password. |
|||||
#3512 | No remote file view | normal | 16 years | 16 years | ||
Description |
Build 3.0.10 No remote file view - Filezilla reports 'not connected to any server' Debug log: (sorry if this is too long or incomplete) Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Status: Resolving IP-Address for theherefordtobacconist.co.uk Trace: ControlSocket.cpp(1057): CRealControlSocket::ContinueConnect(0p12eff18) m_pEngine=0p124d108 caller=0p12cbbb0 Status: Connecting to 66.246.254.132:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220---------- Welcome to Pure-FTPd [TLS] ---------- Response: 220-You are user number 8 of 50 allowed. Response: 220-Local time is now 11:22. Server port: 21. Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Trace: CFtpControlSocket::SendNextCommand() Command: USER <user> Trace: CFtpControlSocket::OnReceive() Response: 331 User <user> OK. Password required Trace: CFtpControlSocket::SendNextCommand() Command: PASS Trace: CFtpControlSocket::OnReceive() Response: 230-User <user> has group access to: cherry trusted Response: 230- compiler Response: 230 OK. Current restricted directory is / Status: Connected Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Retrieving directory listing... Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: CWD / Trace: CFtpControlSocket::OnReceive() Response: 250 OK. Current directory is / Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/" is your current location Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: TYPE I Trace: CFtpControlSocket::OnReceive() Response: 200 TYPE is now 8-bit binary Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (66,246,254,132,227,62) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnClose Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() |
|||||
#10701 | No results in remote file search | normal | worksforme | 8 years | 8 years | |
Description |
In the current version of the FileZilla Client I use, remote file search does no longer yield any results. The files I am looking for, do exist in the remote location, and the total number of remote files is e.g. around 1035 - excluding entries in subdircetories. Remote file search used to work without problems in the previous FileZilla versions I used - thus I believe this is a true bug. |
|||||
#9624 | No retry after failed to sent a command. | normal | fixed | 10 years | 9 years | |
Description |
Hello I'm using internet behind NAT444. My ISP's NAT device allow port binding just for some time. After NAT device doesn't see activity on the port it will silently drop port binding to home's client. To solve this You should add some option to send some null command for every X seconds. (Like in Putty) but for particular issues I found is when I can connect to a server and then inactive for a period of time. Filezilla won't retry by restart a connection with the server when encounter an Error. Here the log: Command: RNFR something.html Error: Connection closed by server I expect when this happen it should restart connection with the server. Either you resolve the issue by adding option to make some TCP activity periodically or retry when encounter an error is fine by me but I think both would be the best. |
|||||
#11749 | No se pueden borrar carpetas con contenidos | critical | duplicate | 6 years | 6 years | |
Description |
En la más reciente versión de FileZilla Pro no se pueden borrar carpetas que tengan algún tipo de contenido. Marca error 550. Sin embargo con otros programas de cliente FTP si es posible hacerlo. Utilizo el software WinSCP y logro borrar carpetas con contenidos sin problema alguno. No puedo hacerlo solamente en FileZilla. |
|||||
#7747 | No sound after end of working | normal | outdated | 13 years | 11 years | |
Description |
Friends, my FileZilla, newest version 3.5.1, will not play the "finished"-sound after work. Please tell me, what can i do. Regards Ratber |
|||||
#12218 | No supported authentication methods available in 3.48, work fine with 3.47 | normal | rejected | 4 years | 4 years | |
Description |
Hi, connecting to the same remote SFTP server (proftpd) it works fine with filezilla 3.47, and doesn't work with 3.48, with the exact same configuration. Client logs : Status: Waiting to retry... Trace: CControlSocket::SendNextCommand() Trace: CSftpConnectOpData::Send() in state 0 Status: Connecting to some-sftp.server.com... Trace: Going to execute C:\Program Files (x86)\FileZilla FTP Client\fzsftp.exe Response: fzSftp started, protocol_version=9 Trace: CSftpConnectOpData::ParseResponse() in state 0 Trace: CControlSocket::SendNextCommand() Trace: CSftpConnectOpData::Send() in state 3 Command: open "someuser@…" 22 Trace: Looking up host "some-sftp.server.com" for SSH connection Trace: Connecting to XX.XX.XX.XX port 22 Trace: We claim version: SSH-2.0-FileZilla_3.48.0 Trace: Remote version: SSH-2.0-SFTP SERVER Trace: Using SSH protocol version 2 Trace: Doing Diffie-Hellman group exchange Trace: Doing Diffie-Hellman key exchange using 4096-bit modulus and hash SHA-256 (unaccelerated) with a server-supplied group Trace: Host key fingerprint is: Trace: ssh-rsa 4096 dd:9b:bf:e7:a8:d1:41:8d:db:69:26:06:a1:dc:76:3a c7eFbbeLQB8Vd5gOrtj6GZzdoQ6aWGOtCxu5HoFd66E= Trace: CSftpControlSocket::SetAsyncRequestReply Command: Trust new Hostkey: Once Trace: Initialised AES-256 SDCTR (AES-NI accelerated) outbound encryption Trace: Initialised HMAC-SHA-256 (unaccelerated) outbound MAC algorithm Trace: Initialised AES-256 SDCTR (AES-NI accelerated) inbound encryption Trace: Initialised HMAC-SHA-256 (unaccelerated) inbound MAC algorithm Status: Using username "someuser". Command: Pass: Trace: Sent password Trace: Remote side sent disconnect message type 14 (no more auth methods available): "No other authentication mechanisms available" Error: FATAL ERROR: Remote side sent disconnect message Error: type 14 (no more auth methods available): Error: "No other authentication mechanisms available" Trace: CSftpControlSocket::OnTerminate without error Trace: CControlSocket::DoClose(66) Trace: CControlSocket::ResetOperation(66) Trace: CSftpConnectOpData::Reset(66) in state 3 Error: Could not connect to server Trace: CFileZillaEnginePrivate::ResetOperation(66) Status: Waiting to retry... Server logs: 2020-07-16 11:38:00,341 mod_sftp/1.0.0[9832]: error using DisplayLogin 'welcome.msg': No such file or directory 2020-07-16 11:38:00,342 mod_sftp/1.0.0[9832]: sent server version 'SSH-2.0-SFTP SERVER' 2020-07-16 11:38:00,342 mod_sftp/1.0.0[9832]: received client version 'SSH-2.0-FileZilla_3.48.0' 2020-07-16 11:38:00,342 mod_sftp/1.0.0[9832]: handling connection from SSH2 client 'FileZilla_3.48.0' 2020-07-16 11:38:00,363 mod_sftp/1.0.0[9832]: + Session key exchange: diffie-hellman-group-exchange-sha256 2020-07-16 11:38:00,363 mod_sftp/1.0.0[9832]: + Session server hostkey: ssh-rsa 2020-07-16 11:38:00,363 mod_sftp/1.0.0[9832]: + Session client-to-server encryption: aes256-ctr 2020-07-16 11:38:00,363 mod_sftp/1.0.0[9832]: + Session server-to-client encryption: aes256-ctr 2020-07-16 11:38:00,363 mod_sftp/1.0.0[9832]: + Session client-to-server MAC: hmac-sha2-256 2020-07-16 11:38:00,363 mod_sftp/1.0.0[9832]: + Session server-to-client MAC: hmac-sha2-256 2020-07-16 11:38:00,363 mod_sftp/1.0.0[9832]: + Session client-to-server compression: none 2020-07-16 11:38:00,363 mod_sftp/1.0.0[9832]: + Session server-to-client compression: none 2020-07-16 11:38:00,915 mod_sftp/1.0.0[9832]: sending acceptable userauth methods: password 2020-07-16 11:38:00,934 mod_sftp/1.0.0[9832]: client sent SSH_MSG_IGNORE message (13 bytes) 2020-07-16 11:38:00,934 mod_sftp/1.0.0[9832]: cipher algorithm 'USERAUTH_REQUEST someuser' or MAC algorithm 'none' unacceptable for password authentication, denying password authentication request 2020-07-16 11:38:00,934 mod_sftp/1.0.0[9832]: no more auth methods available, disconnecting 2020-07-16 11:38:00,934 mod_sftp/1.0.0[9832]: disconnecting YY.YY.YY.YY (No other authentication mechanisms available) It works both with 3.47 and 3.48 connecting to a remote OpenSSH server instead of proftpd. I suppose there are some differences in the supported algorithms but the error messages are not crystal clear and I didn't found any related changes in the changelog for 3.48 on https://filezilla-project.org/versions.php. As a workaround we now use another SFTP client. |
|||||
#9676 | No tab stop for local or remote file list | low | fixed | 10 years | 10 years | |
Description |
After updating to 3.9.0.1, pressing the Tab key no longer stops in the local or remote file list, when the directory trees are hidden. The caret moves from the Local site: address immediately to the Remote site: address. When the directory trees are shown, the caret will stop in the file lists. |
|||||
#11033 | No warning when server truncates output | normal | rejected | 8 years | 8 years | |
Description |
It seems that when server sends something like
Filezilla client doesn't warn the user. And then the user think that it downloads all the files in the directory but it does not. |
|||||
#4202 | No way to set the Idle time | low | rejected | 15 years | 15 years | |
Description |
The idle time is WAY to short, but to make it worse, there is no way for the user to change this. A very strange omission! Many people probably falsely assume that they can change the "time out" setting, but this is only for transfers, not idle time. Why not let the user adjust this? I am tired of, every 30 seconds, having to re-connect and navigate back to the subdirectory on the server before I can ftp a file again. Thanks for hearing my rant - and yes I kind of would call this a "bug" :-) This is for version 3.2.0 (and the previosu one). |
|||||
#3198 | No way to set the Interface to use Medium or Large Icons | normal | 17 years | 16 years | ||
Description |
Using Filezilla 3.0.0.RC2 under feisty. This release comes with Blukis icon set, in all three sizes. Selecting in Settings > Interface > Themes: Blukis, changes the Icon Set, but there is no intuitive way to change the interface icon sizes. Tried selecting "Large icons" in the Preview, the clicking OK, but that did not help. Missing "icon set size" combo-box perhaps? Thanks! |
|||||
#10353 | Not Connecting to server after updates | normal | rejected | 9 years | 9 years | |
Description |
Status: Resolving address of clev14.com Status: Connecting to 184.154.227.2:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Error: Received TLS alert from the server: Handshake failed (40) Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of clev14.com Status: Connecting to 184.154.227.2:21... Status: Connection established, waiting for welcome message... Response: 220-######################################################### Response: 220-Please upload your web files to the public_html directory. Response: 220-Note that letters are case sensitive. Response: 220-######################################################### Response: 220 This is a private system - No anonymous login Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: Received TLS alert from the server: Handshake failed (40) Error: Could not connect to server |
|||||
#5079 | Not Showing Directories Beginning with Period/Dot | normal | rejected | 14 years | 10 years | |
Description |
This has been the case for several versions now. I have some subdirectories in my web account that begin with a period/dot ".". I can enter the directories manually in the address bar of FZ, but they otherwise will not show in the server file list. |
|||||
#10736 | Not able to check for updates from Help > Check for updates... | low | worksforme | 8 years | 8 years | |
Description |
For as long as I can remember, FileZilla Client has not been able to connect to check for updates (I have to manually go to the website). This is the error: Started update check on 2016-01-31 13:55:00 Own build type: official Disconnected from server Downloading /update.php?platform=x86_64-w64-mingw32&version=3.15.0&osversion=10.0&osarch=64&cpuid=sse,sse2,sse3,ssse3,sse4.1,sse4.2,avx,avx2,aes,pclmulqdq,rdrnd,bmi2,bmi2 Resolving address of update.filezilla-project.org Connecting to 136.243.154.122:443... Connection attempt failed with "ECONNREFUSED - Connection refused by server". Disconnected from server: ECONNREFUSED - Connection refused by server Disconnected from server File transfer failed ================================================== I have tried with FIREWALL off too. |
|||||
#10263 | Not able to connect | normal | outdated | 9 years | 7 years | |
Description |
Hello, I have upgraded filezilla to 3.10.1.1 and from then i am not able to connect ftp server. Please advise to resolve this issue asap. |
|||||
#9999 | Not active server with SSL | normal | duplicate | 9 years | 9 years | |
Description |
Hello I downloaded the latest FTB your client and tried to link to my friend's FTP, and he does not care. The server has certified but is not valid, that is, when I go into my friend's panel appears the "https" in red. Try to fix this if I have to go back to the old version. |
|||||
#3721 | Not all files upload when sending 400 to 500 small jpegs to website | normal | outdated | 16 years | 12 years | |
Description |
Version 3.1.1.1 O/S Windows XP Home (Service Pack 2) When uploading images to my website gallery (typically 400 to 500 images - all v. small JPEG's) not all upload. A black box with a little red square in a small white box appears instead. Have tried dragging & dropping individual files concerned but this doesn't work. Have deleted entire gallery & re-tried many times but problem remains. |
|||||
#5175 | Not all icons are shown in the toolbar | normal | rejected | 14 years | 14 years | |
Description |
Not all icons shown in the various design-skins are shown in the toolbar. Where I can edit my own toolbar - there is no way to do it. e.g. I'm looking for the button to copy all selected files to my server. (from the left to the right) Kind regards KH (sorry for my english) |
|||||
#4393 | Not all sites connect | normal | fixed | 15 years | 15 years | |
Description |
After update from FileZilla 3.2.3 to FileZilla 3.2.3.1 there are some connections who don't work anymore, downgrading to 3.2.3 again doesn't make a difference anymore it's also bad... The version before 3.2.3 also had the same problem. So the upgrade to 3.2.3 was very welcome cause I really need the not connected sites... Gives the errors Connection lost ; Can not connect to server. A little second notification of me is that you used new icon's in 3.2.3, they are changed into the old ones if updating to 3.2.3.1 Greetings, Trace7r. |
|||||
#4395 | Not closing connections to FTP Server | low | worksforme | 15 years | 5 years | |
Description |
I am using Filezilla, latest release, and are seeing connections being left open to the server after I have clicked on disconnect. The last command I do see coming across to the server is the LIST command, and that is were it is hanging. The server is WS FTP 7, running SSL. Below is an output of the log with debug on from Filezilla. My system I am running Vista Ultimate X64. When using other clients the connections are closing out properly. Status: Resolving address of ftp.ezpaycenters.net Status: Connecting to 64.143.96.59:990... Status: Connection established, initializing TLS... Trace: CTlsSocket::Handshake() Trace: CTlsSocket::Handshake() Trace: CTlsSocket::Handshake() Trace: CTlsSocket::Handshake() Trace: Handshake successful Trace: Cipher: AES-128-CBC, MAC: SHA1 Status: Verifying certificate... Trace: CFtpControlSocket::SendNextCommand() Status: TLS/SSL connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220 ftp.ezpaycenters.net X2 WS_FTP Server 7.0(44971704) Trace: CFtpControlSocket::SendNextCommand() Command: USER nareggiej Trace: CFtpControlSocket::OnReceive() Response: 331 Enter password Trace: CFtpControlSocket::SendNextCommand() Command: PASS Trace: CFtpControlSocket::OnReceive() Response: 230 User logged in Trace: CFtpControlSocket::SendNextCommand() Command: SYST Trace: CFtpControlSocket::OnReceive() Response: 215 UNIX Trace: CFtpControlSocket::SendNextCommand() Command: FEAT Trace: CFtpControlSocket::OnReceive() Response: 211-Extensions supported Response: SIZE Response: XMD5 Response: XSHA1 Response: XSHA256 Response: XSHA512 Response: XQUOTA Response: LANG EN, ES, FR, GE Response: MDTM Response: MLST size*;type*;perm*;create*;modify*; Response: REST STREAM Response: TVFS Response: UTF8 Response: AUTH SSL;TLS-P; Response: PBSZ Response: PROT C;P; Response: 211 end Trace: CFtpControlSocket::SendNextCommand() Command: PBSZ 0 Trace: CFtpControlSocket::OnReceive() Response: 200 PBSZ=0 Trace: CFtpControlSocket::SendNextCommand() Command: PROT P Trace: CFtpControlSocket::OnReceive() Response: 200 PRIVATE data channel protection level set Status: Connected Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Retrieving directory listing... Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/users/nareggiej" is current directory Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: TYPE I Trace: CFtpControlSocket::OnReceive() Response: 200 Transfer mode set to BINARY Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (64,143,96,59,254,106). Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CTlsSocket::Handshake() Trace: CTlsSocket::Handshake() Trace: CFtpControlSocket::OnReceive() Response: 125 Transferring directory Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTlsSocket::Handshake() Trace: Handshake successful Trace: Session resumed Trace: Cipher: AES-128-CBC, MAC: SHA1 Trace: CTransferSocket::OnConnect Trace: CTlsSocket::OnSocketEvent(): pending data, postponing close event Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer completed Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Disconnected from server Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) |
|||||
#5687 | Not creating initial remote directory with local directory upload | normal | outdated | 13 years | 10 years | |
Description |
I am seeing a problem where the client is not creating the initial remote directory. Example: I want to upload c:\foo to the remote location of /home/user/foo I select foo directory on the local end and user directory on the remote end. I then select add to queue of the local foo directory and then attempt to process the queue. The queue will timeout trying to upload the files as it does not create the initial /home/user/foo directory when it performs the first CWD /home/user/foo. Attached is a log of an actual attempt at this. If I manually create the /home/user/foo directory prior to processing the queue then the upload will work fine and subdirectories will also be processed ok. I am also using the latest rc1 candidate |
|||||
#11455 | Not password prompt for first time setup using Interactive | low | invalid | 6 years | 6 years | |
#10146 | Not recover the file list and not connected | critical | duplicate | 9 years | 9 years | |
Description |
When I try to connect to my hosting, tries connect and then disconnect me and does not show the file list. Status: Resolving address xxxxxxxxxxxxxxxxxxxx.xxx Status: Connecting to xxx.xxx.xxx.xxx:21 ... Status: Connection established, waiting for welcome message ... Status: Initializing TLS ... Status: Verifying certificate ... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Online Status: Retrieving directory listing ... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (108,61,29,155,37,151) Command: MLSD Error: Connection timed wait Error: Failed to retrieve directory listing Status: Resolving address xxxxxxxxxxxxxxxxxxxx.xxx Status: Connecting to xxx.xxx.xxx.xxx:21 ... Status: Connection established, waiting for welcome message ... Status: Initializing TLS ... Status: Verifying certificate ... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Online Status: Retrieving directory listing ... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (108,61,29,155,218,184) Command: MLSD Error: Connection timed wait Error: Failed to retrieve directory listing |
|||||
#10171 | Not seeing directory when logged on to ftp site(godaddy) | low | duplicate | 9 years | 9 years | |
Description |
In latest version 3.10, I do not see any directory when connected. I also get a not connected error. I checked the connection from Site Manager and got a notice of an existing connection and whether I wanted to restart etc. The top of the screen show the connection to the proper IP, but the right panel says not Connection. Went back to previous version with same connection strings and no problem |
|||||
#10172 | Not seeing directory when logged on to ftp site(godaddy) | low | duplicate | 9 years | 9 years | |
Description |
In latest version 3.10, I do not see any directory when connected. I also get a not connected error. I checked the connection from Site Manager and got a notice of an existing connection and whether I wanted to restart etc. The top of the screen show the connection to the proper IP, but the right panel says not Connection. Went back to previous version with same connection strings and no problem |
|||||
#4348 | Not sorting remote directory | normal | duplicate | 15 years | 15 years | |
Description |
in the last revision 3.2.3.rc1 remote directory last modified sorting not works. I'm using Spanish date format dd/mm/YYYY. This problem occurs only in the last revision. Thanks in advance |
|||||
#3793 | Not well supporting Chinese characters | normal | rejected | 16 years | 16 years | |
Description |
Here is an apparent bug. When logging into a Chinese FTP site and entering a folder named in Chinese characters, the "Remote site" does not display the path normally. In more detail, it always does not recognize Chinese characters, and thus shows some confusing ones. I believe that this software will be more attractive if this bug is fixed. |
|||||
#6526 | Not working with vmWare | normal | duplicate | 13 years | 12 years | |
Description |
I have latest filezilla running on 3 machines, 1 Win XP, 1 Win 7 and both working fine, when I try running in a Win XP VM ware session connecting to my site which is running zftp server it failes to connect at the Status: Initializing TLS... line. The settings are the same - any idea what VMware might be blocking and how I can unblock it? |
|||||
#1333 | Nothing appears in lower remote pane | normal | 16 years | 16 years | ||
Description |
In classic mode, on the lower-right pane (where files appear) there is a scrollbar as if there should be something there, but nothing appears. This just started happening randomly when things were working fine before, and I tried upgrading, then reinstalling to no avail. I rebooted twice in the process and that didn't help things. It also still happens if I try to change the interface layout. I'm attaching an image to show the issue. Since this is a work computer, I blurred out some things for security reasons. There are no error messages, e.g.: Response: 257 "/include/sitespecific" is current directory. Command: PASV Response: 227 Entering Passive Mode (69,28,174,147,17,109) Command: LIST Response: 150 Opening ASCII mode data connection for /bin/ls. Response: 226 Transfer complete. Status: Directory listing successful |
|||||
#10808 | Notification alerts no longer respect the "Show notification bubbles" flag in settings | normal | worksforme | 8 years | 8 years | |
Description |
In Win10, when upgrading to 3.16.1, the program now refuses to respect the "Show notification bubbles" flag. Every transfer results in the notification bubble and audio alert. Closing and restarting application don't resolve. Editing filezilla.xml doesn't resolve (moved the setting around the file). This setting worked correctly in the previous version, but does not work in 3.16.1. |
|||||
#12643 | Notifications no longer show up when transfer is finished | normal | worksforme | 2 years | 2 years | |
Description |
I use FileZilla on OpenSUSE Tumbleweed. It used to be the case that, when FileZilla finished uploading or downloading a bunch of files, if FileZilla was not the currently focus application, it would emit a baloon notification on the bottom right of the screen just above the tray icons, system clock, etc. I'm not sure what those notifications are called. Now it has stopped doing that, and I haven't touched any configuration. |
|||||
#11938 | Number of files in directory wrong | high | rejected | 5 years | 5 years | |
Description |
When browsing the directory inside a Wordpress installation /wp-content/uploads It shows me 9998 files... When scrolling down its stops at about S... so there is more files but the filezilla client does not show more then 10'000 files would be my assumption. |
|||||
#10495 | Number of simultaneous Uploads / Downloads / Transfers cannot be set | normal | fixed | 9 years | 9 years | |
Description |
A few days ago, I upgraded to Filezilla Client 3.11.0.1 I don't remember which version I had before. But before this featuer was working and now it does not anymore. I can only transfer 1 file at a time, even if I change the settings for the simultaneous downloads / uploads / transfers. This is at least true, when I have already files waiting in a queue to transfer. (I believe in my previuos Filezilla Version, there was only one setting for simultaneous transfers(?) In that version, this feature worked fine) I use the german version. Here is the information of my FZ-client: FileZilla Client Version: 3.11.0.1 Build information:
Linked against:
Operating system:
|
|||||
#11665 | Numeric sorting doesn't working. | normal | worksforme | 6 years | 6 years | |
Description |
Hello, There is a bug, when i am trying to sort the images on a folder from 1-27 it doesn't listing them correctly. I am using 3.35.0-rc2 x64 It should be displayed: 1.png 2.png ... Example video: https://ufile.io/beci2
|
|||||
#7451 | Não foi possível determinar o destino da operação de arrastar e soltar. | high | outdated | 13 years | 11 years | |
Description |
Toda vez que eu clico em algum arquivo dentro do FileZilla 3.5.0 e arrasto para a area de trabalho ou para alguma pasta sempre ocorre este erro "Não foi possível determinar o destino da operação de arrastar e soltar." |