Custom Query (8171 matches)

Trying to connect to server, already made donation , and it still does not connect.

First, a little back-story. At my place of work, I can connect to our sFTP server because our IP is white-listed. My home address is not, so I can only access our server files via FTP when I work from home.

Restarting a queue in a FTP connection that was made in an sFTP connection will fail, even if it's the same host.

Steps to Reproduce:

1. Start on an sFTP Host Connection.
2. Build a queue of files to download, but do not process yet.
3. Disconnect / Move to a FTP connection at the same host location.
4. Begin to Process queue.

Result: File transfer does not succeed.

-Ionix

Specs are down below, I think I searched the tracker fairly decently, I apologize if this may be a duplicate I may have missed.

FileZilla Client

Version: 3.7.0.2

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2013-05-26 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 3.1.11 SQLite: 3.7.16.2

Operating system:

Name: Windows NT 6.1 (build 7601, Service Pack 1) Version: 6.1 Platform: 64 bit system

I have used FileZilla for years and upgrade each version when it is available with no problems. 3.7.1 would not allow server connection. Downgrade back to 3.6.0.2 works fine. I re-downloaded the upgrade and installed again. The problems was resolved. Bad download?

Best Regards, A big FileZilla fan. Mike Brice MikeBrice@GoBTS.com

If I upload a folder with FileZilla and delete this folder, I will see an Error-Message for each file.

I am on Windows Vista family edition 64 bits. I checked and I have the latest version of Filezilla client. I try to save files on the server via Filezilla. It seems to try 3 times, but it doesn't do anything, the file is not loaded. I tried many times. Nothing works.

I have several two clients that upload logs to a FileZilla server 0.9.41. For some reason I receive the following dialog on the server during transfers. I read other articles that had a patch for this problem, but I am unable to access the patch from the previous tickets. The post was from 4 years ago, so I wondered if it's still applicable.

Here is the log I am seeing.

006803)7/1/2013 14:06:43 PM - (not logged in) (X.X.X.X)> Connected, sending welcome message... (006803)7/1/2013 14:06:43 PM - (not logged in) (X.X.X.X)> 220-FileZilla Server version 0.9.41 beta (006803)7/1/2013 14:06:43 PM - (not logged in) (X.X.X.X)> 220-written by Tim Kosse (Tim.Kosse@…) (006803)7/1/2013 14:06:43 PM - (not logged in) (X.X.X.X)> 220 Please visit ​http://sourceforge.net/projects/filezilla/ (006803)7/1/2013 14:06:49 PM - (not logged in) (X.X.X.X)> AUTH TLS (006803)7/1/2013 14:06:50 PM - (not logged in) (X.X.X.X)> 234 Using authentication type TLS (006803)7/1/2013 14:06:50 PM - (not logged in) (X.X.X.X)> SSL connection established (006803)7/1/2013 14:06:50 PM - (not logged in) (X.X.X.X)> PBSZ 0 (006803)7/1/2013 14:06:50 PM - (not logged in) (X.X.X.X)> 200 PBSZ=0 (006803)7/1/2013 14:06:50 PM - (not logged in) (X.X.X.X)> PROT P (006803)7/1/2013 14:06:50 PM - (not logged in) (X.X.X.X)> 200 Protection level set to P (006803)7/1/2013 14:06:50 PM - (not logged in) (X.X.X.X)> USER * (006803)7/1/2013 14:06:50 PM - (not logged in) (X.X.X.X)> 331 Password required for proxyreports (006803)7/1/2013 14:06:56 PM - (not logged in) (X.X.X.X)> PASS * (006803)7/1/2013 14:06:56 PM - proxyreports (X.X.X.X)> 230 Logged on (006803)7/1/2013 14:07:04 PM - proxyreports (X.X.X.X)> CWD \ (006803)7/1/2013 14:07:04 PM - proxyreports (X.X.X.X)> 250 CWD successful. "/" is current directory. (006803)7/1/2013 14:07:04 PM - proxyreports (X.X.X.X)> TYPE I (006803)7/1/2013 14:07:04 PM - proxyreports (X.X.X.X)> 200 Type set to I (006803)7/1/2013 14:07:04 PM - proxyreports (X.X.X.X)> PORT 172,23,209,54,215,219 (006803)7/1/2013 14:07:04 PM - proxyreports (X.X.X.X)> 200 Port command successful (006803)7/1/2013 14:07:04 PM - proxyreports (X.X.X.X)> STOR XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.log.gz (006803)7/1/2013 14:07:04 PM - proxyreports (X.X.X.X)> 150 Opening data channel for file transfer. (006803)7/1/2013 14:07:05 PM - proxyreports (X.X.X.X)> SSL connection for data connection established (006803)7/1/2013 14:07:05 PM - proxyreports (X.X.X.X)> Data connection SSL warning: SSL3 alert write: fatal: bad record mac (006803)7/1/2013 14:07:05 PM - proxyreports (X.X.X.X)> 426 Connection closed; transfer aborted. (006803)7/1/2013 14:07:05 PM - proxyreports (X.X.X.X)> disconnected.

FileZilla version 3.7.1.1 Windows 7, service pack 1. Issue discovered when connecting over a secure SFTP-SSH protocol connection. The Last modified date of a .txt file is showing the year 2010, when it should show 2013. This only occurs over the secure connection, not in any regular FTP connection protocol. This is not an issue with the remote site as a different FTP program used at my institution displays with the correct 2013 date. Attaching .png screen shopts of both for examples.

I have been trying to use filezilla to upload a site but, Critical error keeps appearing. I am 100% certain my login details are correct so i don't know what the problem is.

These steps will reproduce the problem:

1. Establish a FTP connection to a server.
2. Edit a file on the server by right clicking it and choosing "View/Edit": File opens in your editor.
3. Change the edited file with a script language like PHP: The editor doesn't display the changed file! Even if you choose "View/Edit" again, the old version gets displayed.

If you download the file to your HDD, you see the changes.

When I try to upload several large files via ssh filezilla 3.7.1 crashes

Hi,

I'm continuous needing to sort my local and remote folders by "Modified time" descendent.

Well, since some weeks, when I change either local or remote folders and I go back to de initial folder, it's not focused at the beginning but in the middle of the folder. It's really annoying...

Thanks.

I use two monitors, and when I want to upload a file, which already exists, I get an alert. But the alert doesn't appear on that screen where the filezilla program is opened. Instead, the messege appears on the other monitor in the background.

Upload on Filezilla 3.7.0.2 of css files from Win7 to GoDaddy arrive corrupted and with smaller file sizes. I upgraded to 3.7.1 and found I could not connect at all, so I downgraded. When files are uploaded directly through GoDaddy they arrive intact.

I would like to be able to specify specific file types to be recognized as either binary or ascii so that I can use the auto setting and be assured Filezilla will detect the correct file type. I currently have a problem with some (not all) css and js files not uploading correctly on the auto setting, and it would be nice to rule out that their file types were mis-identified.

FileZilla crashes when I try to delete 350,000 some things from the to do list

I got error message "EAI_NODATA - No address associated with nodename" when I connect using Mac Air computer. But it can login successful when use others computer and mobile with the same login account.

Please fix my account. The message reads: Response: 550 PWD: Permission denied Error: Failed to retrieve directory listing

I'm using Kubuntu gnu/linux 12.04. I have downloaded and installed Filezilla directly from your site. I've been using it in this Kubuntu distribution for about a week now (few days).

Today when using the Site Manager after configuring several sites, I find that when I click on "Connect" or "Ok" Filezilla just crashes and goes away. This is happening to me all the time and is not allowing me to use the Client (will I have to go look into another one after using Filezilla in Windows for 6 years?).

So this is just going on when turning on the "Site Manager", choosing one site from the list and then clicking on "Connect" or "Ok" -it happens with either-, then Filezilla just crashes.

Wanted to report this as it's very odd. Never happened to me before/

hi. for some reason i cant transfer more then one file at a time... i use to have it set to 1 but want to change back to 2 would not work so i tried again and i now have it left at 3 for a few days with no change...

Hello, I try to use Filezilla in my network with windows server 2012 and only works if i disable the firewall. I create all the firewall rules to permit Filezilla and cant work.

Hi,

a couple of our users are receiving a "no data received" error when open a folder in chrome. This occurs after the user is logged in and seems to pop-up after the 4-5th opening of a folder.

In Firefox the page just goes blank.

In IE (tested with IE9) the browser asks for the login details again.

I have worked around the issue by restarting the Filezilla service and requesting users use the filezilla client in future.

Is this a known or issue or is this settings related?

Thanks David

Upgraded from 3.7.1 to 3.7.2. Installed. Main and welcome screen appeared. Clicked on "Quickconnect" drop down arrow and selected (already existing) account and Filezilla crashes.

An attempt to restart Filezilla displays the message "Could not find the resource files for FileZilla, closing FileZilla. / You can set the data directory of FileZilla using the '--datadir <custompath>' commandline option or by setting the FZ_DATADIR environment variable."

Downgraded to 3.7.1 which works for me without problem.

When i start filezilla client,i crash.

问题签名:
  问题事件名称:	APPCRASH
  应用程序名:	filezilla.exe
  应用程序版本:	3.7.3.0
  应用程序时间戳:	52029f25
  故障模块名称:	msftedit.DLL
  故障模块版本:	6.2.9200.16384
  故障模块时间戳:	50108893
  异常代码:	c0000005
  异常偏移:	0009fabf
  OS 版本:	6.2.9200.2.0.0.256.4
  区域设置 ID:	2052
  其他信息 1:	ccc2
  其他信息 2:	ccc26e050958f1c9740725e357b088e2
  其他信息 3:	d905
  其他信息 4:	d905c4a6e8c4f293bb902da09930cc0e

Sytetm: windows 8 Enterprise 64bit

I upgraded my OS to Windows 7. Ever since then the message log window in my Filezilla client is in this extremely small font. It is not like this in any other application so changing the font size in Windows will change applications which are displaying correctly. My version of Filezilla is 3.7.3. I have attached a picture of the Filezilla as well as the clipboard of the message log.

Please add "Bypass proxy" on/off button on the toolbar to quickly switch enable/disable generic proxy to ftp connections without waste time for open settings dialog every time foreach host.

We have tried to send files several times and the client crashes after reporing an issue. When we check for updates we are told we have the most current.

Problem signature:

Problem Event Name: APPCRASH Application Name: filezilla.exe Application Version: 3.7.3.0 Application Timestamp: 52029f25 Fault Module Name: ntdll.dll Fault Module Version: 6.0.6002.18541 Fault Module Timestamp: 4ec3e3d5 Exception Code: c0000005 Exception Offset: 0003dd6d OS Version: 6.0.6002.2.2.0.272.7 Locale ID: 1033 Additional Information 1: a39d Additional Information 2: 3bd3cf452eb5e5fcea07f3014081c5c5 Additional Information 3: faa2 Additional Information 4: 6ac36e3fadf874e3bd9c3bf2194bb860

I have downloaded FileZilla 3.7.3 but can't install it. I get the following pop up:

“You must be connected to the internet to complete your installation. Please connect and try again”

I've tested my connection and was definitely connected to the internet. I disabled my firewall and virus protection, but got the same result again and again. Can you help please? Kind regards.

Jan.

Hey there i have 2 directory that wont delete in filezilla they are:

Dexter.S08E06.A.Little.Reflection.1080p.WEB-DL.DD5.1.H.264-BS Dexter.S08E06.A.Little.Reflection.720p.WEB-DL.DD5.1.H.264-BS I tried refreshing the directory also force showing directory nothing works for those two directory. I right click on them and press yes to delete then i get this respone: 550 failed to change directory & error faile to retrive directory listing.

Could you fix that for me and delete those 2 directory

thanks

After updated to Filezilla Client ver. 3.7.3, the Chinese characters (Chinese (TW))that can displayed correctly in previous version becomes 'Symbols" now. It can only display English characters even I changed language option in "Preference" from system default to Chinese (TW).

This problem just started happening today. I cannot open the application on my Mac at work. As soon as I do, a Problem Report for FileZilla box pops up. Can someone please help me get this working again? It is essential to my web development work. Thanks.

Good Morning, today I noticed several times the same problem: copying a lot of files (500~1000) to an empty folder I receive (randomly) the message: "the target file already exists, please chose an action ..." In the message box the first file has the correct size, the second file has a size of ZERO byte. I think may be a problem in the creation and copy of the file. I am using the version 3.7.3 on a 64 bit system with win 7. Best regards

Since I upgraded to FileZilla 3.7.3, all files uploaded to the server AND those created on the server outside of FileZilla are displaying with an incorrect (future) date.

A file created locally and uploaded to the server today (09/06/2013 @ 14:33:59) using FileZilla is showing a last mod date of 04/30/2014 16:59:23.

I can verify the actual server attributes on the file as today:

Directory DSA1:[BSVCCTR.RGAJEWSKI] AOC_CAT_FILE.QZS;2 2/8 6-SEP-2013 14:33:59.62 AOC_CAT_FILE.QZS;1 2/8 6-SEP-2013 14:31:04.98

My server timezone offset is set to 0 hours, 0 minutes.

If the "preserve timestamps" option is selected, downloads keep the displayed date/time (04/30/2014).

If the "preserve timestamps" option is not selected, downloads use the current date/time (as expected).

Screen images available upon request.

I get an "error writing xml file" and several others attached when I try to launch the program. Downloaded it 3X and same thing each time. Wouldn't quit. Had to force quit to move on. Worked fine on the PC.

So.. i just want to upload my files to my website, but the FileZilla wont upload it as what the files like. it's broken. i just hate it. i need to upload a big file more than one time...

The new windows update (security fixes only) on 9/10/13 "broke" my filezilla. When I right click a file to view or do anything with, it produces an error. Did a system restore before update and Filezilla works again just fine. Sorry that I didn't write down the error message before system restore :( but I know the update messed up 3.7.3 that I use.

Filezilla is a really nice prgram. I think it needs a search and merging module very much.

When transferring a file, saved with ANSI encoding,from my pc to the server (z/OS), the danish national language characters in the file isn't translated correctly (as it used to be in older FZ versions). Å is being translated to $ Æ is being translated to [ Ø is being translated to @

after installing filezilla i changed the default texteditor from notepad to notepad++ Filezilla shows the notepad++ icon on files associated with it, but still opens the files with notepad.

I upload 3 files at the same time(300~700KiB/s per file, >300MB files), it sometimes cause the whole operating system lag.

I'm using FileZilla client version 3.7.3 and trying to connect to a FTP server. I can connect to the server just fine manually via command shell FTP from my system. I can tell it's running FileZilla server because the output of 'remotehelp server' tells me so.

My FileZilla client never shows folders/files in the remote pane. There's just a message that says 'Not connected to any server'. During the connect process the activity log shows the following and just keeps re-attempting over and over again:

Status: Connecting to [IP Address]... Status: Connection established, waiting for welcome message... Response: 220- Response: 220-* Response: 220 * Command: USER [the user] Response: 331 Password required for [the user] Command: PASS Response: 230 Logged on Command: CLNT FileZilla Error: Could not connect to server

The settings on my client are..... General Tab: Ftp Protocol, Use Plain FTP, Logon Type is Normal. Username & Password set. Advanced Tab: Default (AutoDetect) for server. Nothing else set. Transfer Settings: Transfer mode is Default. Nothing else set. Charset: autodetect. Nothing else set.

i set a max of 1 connection for a server in site manager and after connecting i see filezilla uploading with 5 connections simultaneously to that server.

I am transferring files from one computer to another and it does not preserve the date/time information. Under transfer, I have a checkmark by the line to preserve that information.

file ​sftp://BSSI@sftp.ihcfa.com/Outgoing/ZZBSSI_iHCFA-BSSI-837P-04191312425_ZZ_BSSI_2013_04_20_05_05_29_644388.CLM_A0001LWI.ImportReport.PDF keeps transmitting to our electronic ihcfa site.

allow to define generic proxy per site. the rule is:

1. if define generic proxy per site, it will use it (ignore bypass proxy setting)
2. if no generic proxy per site, and if bypass proxy, it will connect directly
3. if no generic proxy per site, and if not bypass proxy, it will use system's generic proxy if defined.

When using the Windows command line ftp program, I am successful in connecting to a site, getting a directory listing, and transferring a file. However, after successfully loggin in, the FileZilla GUI fails when it asks for a directory listing.

Status: Connecting to 141.157.27.118:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220-FileZilla Server version 0.9.40 beta Trace: CFtpControlSocket::OnReceive() Response: 220-written by Tim Kosse (Tim.Kosse@…) Trace: CFtpControlSocket::OnReceive() Response: 220 Please visit ​http://sourceforge.net/projects/filezilla/ Trace: CFtpControlSocket::SendNextCommand() Command: USER Samsung Trace: CFtpControlSocket::OnReceive() Response: 331 Password required for samsung Trace: CFtpControlSocket::SendNextCommand() Command: PASS * Trace: CFtpControlSocket::OnReceive() Response: 230 Logged on Status: Connected Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: Measured latency of 207 ms Status: Retrieving directory listing... Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: CWD /users/ftp/Samsung Trace: CFtpControlSocket::OnReceive() Response: 550 CWD failed. "/users/ftp/Samsung": directory not found. Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/" is current directory. Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: TYPE I Trace: CFtpControlSocket::OnReceive() Response: 200 Type set to I Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (141,157,27,118,7,15) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: MLSD Trace: CFtpControlSocket::OnReceive() Response: 425 Can't open data connection. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Error: Failed to retrieve directory listing Trace: CFtpControlSocket::OnReceive() Response: 421 Connection timed out. Trace: Unexpected reply, no reply was pending. Trace: CRealControlSocket::OnClose(0) Error: Connection closed by server

i have this new problem Could not write to transfer socket: ECONNABORTED

I saw the other postings but links are expired patch, was also another version of filezilla, and this post is new, new version of filezilla, please help Thank you.

I tried to make a user with password 123 . i made it then i opened up the filezilla client , i entered user's name and the password (wich was 123) then it said Login Incorrect . But when i went back to the Server i saw that the password was changed to some random numbers wich are 20 chars long . Please help .

I'm using Filezilla for a couple of years now to copy files to and from my mediacenter hard-drive. Everything worked fine till today. When connecting to the disk (in this case acting as an ftp server), it shows all my drives as files. And therefore they won't open up in Filezilla. I'm just getting odd error messages like "file copy failed". I tried another FTP-application and it opens up fine, also when using Firefox, there are no problems at all.

I also tried re-installing Filezilla and we are using the latest version of the software on Windows 7 Professional SP1.

When I chose an option from my servers list, the option I chose stays on the screen, like floating. Check the image for more info. Quitting FZ doesn't remove it.

Upon switching from one file to another to upload, recently I have been receiving the following error messages every time:

Error: Network error: Software caused connection abort Error: Failed to retrieve directory listing

If my client opens 34 connections to FileZilla server at the same time, then connections fail to open. In order to work around the issue, I have to put a lock around connecting to the FileZilla server to ensure only 1 connection is being created at a time.

Everything is turning into Chinese and I dont have a clue why

I am having trouble with retrieving the directory from server. It's showing me the message in log that, Response: 230 Login successful. But after some second I got this, Status: Retrieving directory listing... Command: CWD /html Response: 250 Directory successfully changed. Command: TYPE I Response: 200 Switching to Binary mode. Command: PASV Response: 227 Entering Passive Mode (188,94,250,224,165,81) Command: LIST Error: Connection timed out Error: Failed to retrieve directory listing

Because of this error I have formatted my laptop and reinstall everything, but got the same error message again.

Can anyone please help me out of this.

Is the Filezilla download button supposed to link to a proprietary installer that does not match the published signature or filename?

By clicking through to the additional downloads page, it is possible to download Filezilla without this installer, but I find it very hostile behavior of open source software.

The "special offers" I got in the installer were both called WinZip, but neither are the actual WinZip software. One was a registry cleaner, the other I don't remember. Beyond that a "special offer" of freeware is not "special" (so that is misleading by itself), the product's names are very misleading to users, probably damaging their computers and filling it up with adware, and also damaging to the reputation of Filezilla. I'd rather pay than run this proprietary, misleading adware. If you guys need better hosting, I can provide a 35mbps connection with unmetered data. Thanks.

Hi, I'm to download a zip file. The browser stops downloading pretending that it is downloaded completely. I tried to download 97MB file but it stops when it is 2-3MB. I disabled my antivirus and the same problem appears. BTW, I recently formatted my computer, before that I didn't face this problem.

I'm waiting for your help. Thanks in advance :)

FileZilla Client

Version: 3.7.3

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2013-08-07 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 3.1.11 SQLite: 3.7.16.2

Operating system:

Name: Windows NT 6.1 (build 7601, Service Pack 1) Version: 6.1 Platform: 64 bit system

filezilla on download completion want's to rewrite download file.problem just started after windows updates where installed.

I am seeing any new files added to a RHEL 5.x box using SFTP, shows file having Last Modified date that are in the future. I have seen the bug here in tickets, but it seems to just get dismissed ? If I go local to the server via ssh the dates are correct locally. I have checked the ntp server, the date/time, zones, on server and client and everything is in order. My client machine is a Windows 7 Pro sp1 64bit os.

Been using your product for many years, love it. But recently I went the sftp for security reasons. I have noticed that at the end, the directory listings do not automatically refresh like it use to do. I have to manually refresh to see the uploaded file at the ftp site. Not a real big deal, just thought maybe you would like to know about it. The file I just uploaded does not show up at the ftp site without doing the refresh. Its there, just refresh is broken.

When using filezilla it appears that passwords are authenticated when they are correct and when they begin with the correct password. example password is pass1234 pass1234 will authenticate and pass1234567 will authenticate. I have tested this on both windows 7 and on linux 64bit and both behave exactly the same.

Not sure if its a client or server error but something is going wrong

I am using Windows 7 and haven't tested this under other operating systems. This happened to me with stable release 3.7.3 and a build I did tonight from SVN.

When using the right mouse button to bring up the context menu in either the local or remote directory tree controls in FileZilla Client, if you drag from the highlighted folder over one that isn't highlighted and release the button, the non-highlighted folder will be the target of the context menu that pops up. Worse, if this happens with a remote directory and you choose to delete the directory, the warning dialog that comes up doesn't give the name of the directory to be deleted.

I took a look at src/interface/LocalTreeView.* and src/interface/RemoteTreeView.* as well as the wxTreeCtrl source from wxWidgets 2.8.12. The event handler for a context menu event in LocalTreeView/RemoteTreeView is passed a tree item ID by wxWidgets that corresponds to the current mouse cursor position when the right mouse button is released. ​This is apparently standard behavior for Windows, so it seems it's up to FileZilla to accommodate it.

I'm attaching a patch that solves the issue for me. It adds an event handler for right-button drag that sets a boolean variable to 'true' to indicate (when the button is released and OnContextMenu() is called) that the context menu should use the currently selected tree item instead of the one passed to it by wxWidgets. If no drag occurs, the variable is false and the context menu will use the tree item passed by wxWidgets. The variable is reset to false after each OnContextMenu() call.

I thought it might be sufficient to have OnContextMenu() always use the selected item instead of the one under the mouse pointer, but if that is done it does not find the correct item if a different folder than the one currently selected is right-clicked.

I recently installed Parallels on my Mac and since then have been experiencing errors with FileZilla that I did not have prior to Parallels. I am wondering if there is some sort of compatibility issue? Here are the issues I’ve been encountering.

I cannot access any SFTP sites. The user name and passwords are correct, (double checked with the site owner), but it will never let me connect. FTP works as far as pulling up the site, but disconnects me from actually making any changes.

This is the most recent error code I received : Error: Could not read from socket: ECONNRESET - Connection reset by peer Error: Disconnected from server

I am the only person in my office experiencing this issue with the same sites, and the only one running parallels, thus leading me to believe it's a parallels issue?

I appreciate your time!

Remote FTP site shows 00 seconds on the time stamp even though the file actually have second information. Attached is a sample of the local file side by side with the same file in the remote ftp site. The local file shows the seconds and the remote file shows 00. Those 2 files are the identical the file was download from the FTP site using another FTP client and put in the local folder. No matter which file you see all files last modified shows 00 seconds.

when i execute the filezilla it shows error could not connect to server

From version v3.7.4.1 file size is not correct!!

FileZilla Client

Version: 3.7.4.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2014-02-11 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 3.1.11 SQLite: 3.7.16.2

Operating system:

Name: Windows NT 6.1 (build 7601, Service Pack 1) Version: 6.1 Platform: 64 bit system

Every Time I try to connect - it says that is connecting to the server. Then it times out. And as I understand as soon as the connection is made - the right side locates the remote site - so I could upload & transfers file. Is that true? Can anyone help with this issue?

Everyone within my company is now having issues connecting to the FTP with filezilla client. We are using a Linux server with Debian Operating System for our file server. I have researched this issue but none of the solutions I have found have helped. Are there compatibility issues? Can someone please help me figure this out.

Each time the application is launched a line is appended to filezilla.xml with the following text <Setting name="Language Code" />

The line is appended to the end of the file not inside the <Settings> tag.

Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (72,167,232,176,198,126). Command: LIST Error: Transfer connection interrupted: ECONNABORTED - Connection aborted Response: 425 Can't open data connection. Error: Failed to retrieve directory listing

Trying to upload to my website and putting 21 in as port number, I get the message: "Could not parse server address:

Invalid port given. The port has to be a value from 1 to 65535"

This same message occurs regardless of what port number is used.

I note that there was a ticket about this some six years ago but I could not see an answer.

Anthony Healey

I frequently upload a file "roster.php". It has always worked the first time, But, over the past month or so it indicates "Accepted data connection" followed by another request if I want to overwrite the existing file. I respond yes and it repeats the sequence about three times then then says file transfer failed. But when I look at the file the file has been updated. It didn't fail after all. Today I chose to hit cancel in the 2nd request to verify that I wanted to overwrite the file.It then told me that the file transfer was successful. I've attached a screen clip. Now that I know that all I have to do is hit cancel I can live with it, but thought you should know.

for 2 days, have been unable to connect Filezilla to directory. I am on 3.7.4.1 filezilla and Windows 7 Professional. My IT states that the port does not have any issues (22). suggestions?

FileZilla Client

Version: 3.7.4.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2014-02-11 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 3.1.11 SQLite: 3.7.16.2

Operating system:

Name: Windows NT 6.1 (build 7601, Service Pack 1) Version: 6.1 Platform: 64 bit system

I have a hard drive on a router (linksys EA4500) connected to it via a remote pc to be able to use. I am local to the test.your program works fine and recognizes the hard drive, it can, however, download files, but not upload. It gives the error message: fatal bestandsoverdrachtsfout (file transfer error).

What can this be the cause?

Regards Frank

Hi

Recently after update my version to latest upon ftp transfer to my ISP provider I get the following error for some files being uploaded

550 The process cannot access the file because it is being used by another process. Error: Critical file transfer error

Earlier this was not happening. I searched the net and found that it is a filezilla problem. I used both active and passive mode. Still Same. can you advice what could be the issue.

Regards

Balbir

Hello,

I have been using Filezilla for over 4 years now, it recently stopped working and started giving me a 530 error. I know all my credentials are correct because I never changed them. I recently purchased new web hosting for another business that I have and same error. Here are the credentials I have tried:

Host - mydomain.com, ftp.mydomain.com, ​ftp://mydomain.com Port - 21 Protocol - FTP Encryption - Plain FTP Logon Type - Normal User - atrivisano, atrivisano@… Password - correct password

I tried to login to my FTP server via google chrome with this:

Host - mydomain.com User - atrivisano@… Password - correct password

and it worked. Also, I tried coreFTP and it said I could not log in. I have tried setting to Active Mode and I have allowed Filezilla through my windows 8 firewall. My point of access for the internet has always been my iPhone Hotspot and has not changed.

My question is: How do I fix this because the File Manager on web hosts SUCKS...

Upon trying to install FileZilla Client 3.8.0 from the website https://filezilla-project.org/ I was warned by my Bullguard antivirus software that a virus had been detected: Gen.Trojan.Heur2.GZ.PG2@baUQfqpi. Infected object: ids.sourceforgedn.com. Infected file: KLFst.pyr.exe.pat. Should I worry about this?

Limit size of logfile doesn't really follow the size user set. it is always limit to 10KiB even when I set 1000 in box. And the box display in unit of MiB but I think program actually set the size in unit of KiB. But it really doesn't matter since program doesn't take any value from user's settings.

Hi,

When using the site manager to connect to a site it throws up this error:

Status:	Resolving address of web1213.ixwebhosting.com
Status:	Connecting to 74.91.250.2:21...
Status:	Connection established, waiting for welcome message...
Response: 220 ProFTPD 1.3.3g Server (74.91.250.2) [74.91.250.2]
Command: USER  xxxxxxxx
Response: 331 Password required for xxxxxxxx
Command: PASS *********
Response: 530 Login incorrect.
Error:	Critical error
Error:	Could not connect to server

(I have redacted the account number but they are both the same in the place where I put the xxxxxxx.)

But when using the Quick Connect bar with exactly the same information it connects OK as seen here:

Status:	Resolving address of web1213.ixwebhosting.com
Status:	Connecting to 74.91.250.2:21...
Status:	Connection established, waiting for welcome message...
Response: 220 ProFTPD 1.3.3g Server (74.91.250.2) [74.91.250.2]
Command: USER xxxxxxx
Response: 331 Password required for xxxxxxx
Command: PASS *********
Response: 230 User xxxxxxx logged in
Status:	Server does not support non-ASCII characters.
Status:	Connected
Status:	Retrieving directory listing...
Command: PWD
Response: 257 "/" is the current directory
Status:	Directory listing successful

The error occurs ONLY with one particular site - the last one that I added (the 5th one). The other 4 sites connect from the Site Manager without any problems.

The protocol I am using for all my sites (including the problem site) is FTP - File Transfer Protocol. Encryption is Use plain FTP (same for all sites). Logon Type for all sites is Normal. User and password boxes are filled out with correct data.

I am using the newest version, 3.8.0, and it is doing this same error as the older version I had (I don't remember the previous version).

Miketech73 (at) yahoo (dot) com filezilla *says* I'm connected; but won't connect to remote site.

Win 7-64 home prem svc pak 1 AMD Phenom II dual core 3.00 Ghz ram: installed: 4.00 Gb, 3.75 usable McAfee virus & firewall no win firewall

FileZilla 3.8.0 build date: 2014-03-28 uninstalled FileZilla; re-booted, then re-installed FileZilla

was working before last update; FileZilla 3.7.4.1 worked, now can't connect to remote site.

log:

2014-04-03 21:37:45 13820 3 Status: Connecting to 184.168.164.1:21... 2014-04-03 21:37:49 13820 3 Status: Connection established, waiting for welcome message... 2014-04-03 21:37:50 13820 3 Trace: CFtpControlSocket::OnReceive() 2014-04-03 21:37:50 13820 3 Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- 2014-04-03 21:37:50 13820 3 Response: 220-You are user number 4 of 500 allowed. 2014-04-03 21:37:50 13820 3 Response: 220-Local time is now 18:37. Server port: 21. 2014-04-03 21:37:50 13820 3 Response: 220-This is a private system - No anonymous login 2014-04-03 21:37:50 13820 3 Response: 220 You will be disconnected after 3 minutes of inactivity. 2014-04-03 21:37:50 13820 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-03 21:37:50 13820 3 Command: USER d9ee6681 2014-04-03 21:37:51 13820 3 Trace: CFtpControlSocket::OnReceive() 2014-04-03 21:37:51 13820 3 Response: 331 User d9ee6681 OK. Password required 2014-04-03 21:37:51 13820 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-03 21:37:51 13820 3 Command: PASS * 2014-04-03 21:37:52 13820 3 Trace: CFtpControlSocket::OnReceive() 2014-04-03 21:37:52 13820 3 Response: 230 OK. Current restricted directory is / 2014-04-03 21:37:52 13820 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-03 21:37:52 13820 3 Command: SYST 2014-04-03 21:37:52 13820 3 Trace: CFtpControlSocket::OnReceive() 2014-04-03 21:37:52 13820 3 Response: 215 UNIX Type: L8 2014-04-03 21:37:52 13820 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-03 21:37:52 13820 3 Command: FEAT 2014-04-03 21:37:53 13820 3 Trace: CFtpControlSocket::OnReceive() 2014-04-03 21:37:53 13820 3 Response: 211-Extensions supported: 2014-04-03 21:37:53 13820 3 Response: EPRT 2014-04-03 21:37:53 13820 3 Response: IDLE 2014-04-03 21:37:53 13820 3 Response: MDTM 2014-04-03 21:37:53 13820 3 Response: SIZE 2014-04-03 21:37:53 13820 3 Response: MFMT 2014-04-03 21:37:53 13820 3 Response: REST STREAM 2014-04-03 21:37:53 13820 3 Response: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; 2014-04-03 21:37:53 13820 3 Response: MLSD 2014-04-03 21:37:53 13820 3 Response: AUTH TLS 2014-04-03 21:37:53 13820 3 Response: PBSZ 2014-04-03 21:37:53 13820 3 Response: PROT 2014-04-03 21:37:53 13820 3 Response: UTF8 2014-04-03 21:37:53 13820 3 Response: ESTA 2014-04-03 21:37:53 13820 3 Response: PASV 2014-04-03 21:37:53 13820 3 Response: EPSV 2014-04-03 21:37:53 13820 3 Response: SPSV 2014-04-03 21:37:53 13820 3 Response: ESTP 2014-04-03 21:37:53 13820 3 Response: 211 End. 2014-04-03 21:37:53 13820 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-03 21:37:53 13820 3 Command: OPTS UTF8 ON 2014-04-03 21:37:54 13820 3 Trace: CFtpControlSocket::OnReceive() 2014-04-03 21:37:54 13820 3 Response: 200 OK, UTF-8 enabled 2014-04-03 21:37:54 13820 3 Status: Connected 2014-04-03 21:37:54 13820 3 Trace: CFtpControlSocket::ResetOperation(0) 2014-04-03 21:37:54 13820 3 Trace: CControlSocket::ResetOperation(0) 2014-04-03 21:37:54 13820 3 Trace: Measured latency of 795 ms 2014-04-03 21:37:54 13820 3 Status: Retrieving directory listing... 2014-04-03 21:37:54 13820 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-03 21:37:54 13820 3 Trace: CFtpControlSocket::ChangeDirSend() 2014-04-03 21:37:54 13820 3 Command: PWD 2014-04-03 21:37:55 13820 3 Trace: CFtpControlSocket::OnReceive() 2014-04-03 21:37:55 13820 3 Response: 257 "/" is your current location 2014-04-03 21:37:55 13820 3 Trace: CFtpControlSocket::ResetOperation(0) 2014-04-03 21:37:55 13820 3 Trace: CControlSocket::ResetOperation(0) 2014-04-03 21:37:55 13820 3 Trace: CFtpControlSocket::ParseSubcommandResult(0) 2014-04-03 21:37:55 13820 3 Trace: CFtpControlSocket::ListSubcommandResult() 2014-04-03 21:37:55 13820 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-03 21:37:55 13820 3 Trace: CFtpControlSocket::TransferSend() 2014-04-03 21:37:55 13820 3 Command: TYPE I 2014-04-03 21:37:55 13820 3 Trace: CFtpControlSocket::OnReceive() 2014-04-03 21:37:55 13820 3 Response: 200 TYPE is now 8-bit binary 2014-04-03 21:37:55 13820 3 Trace: CFtpControlSocket::TransferParseResponse() 2014-04-03 21:37:55 13820 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-03 21:37:55 13820 3 Trace: CFtpControlSocket::TransferSend() 2014-04-03 21:37:55 13820 3 Command: PASV 2014-04-03 21:37:56 13820 3 Trace: CFtpControlSocket::OnReceive() 2014-04-03 21:37:56 13820 3 Response: 227 Entering Passive Mode (184,168,164,1,196,55) 2014-04-03 21:37:56 13820 3 Trace: CFtpControlSocket::TransferParseResponse() 2014-04-03 21:37:56 13820 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-03 21:37:56 13820 3 Trace: CFtpControlSocket::TransferSend() 2014-04-03 21:37:56 13820 3 Command: MLSD 2014-04-03 21:37:57 13820 3 Trace: CTransferSocket::OnConnect 2014-04-03 21:38:04 13820 3 Trace: CTransferSocket::OnClose(10053) 2014-04-03 21:38:04 13820 3 Error: Transfer connection interrupted: ECONNABORTED - Connection aborted 2014-04-03 21:38:04 13820 3 Trace: CTransferSocket::TransferEnd(3) 2014-04-03 21:38:04 13820 3 Trace: CFtpControlSocket::TransferEnd() 2014-04-03 21:38:58 13820 3 Error: Connection timed out 2014-04-03 21:38:58 13820 3 Trace: CFtpControlSocket::ResetOperation(2114) 2014-04-03 21:38:58 13820 3 Trace: CControlSocket::ResetOperation(2114) 2014-04-03 21:38:58 13820 3 Trace: CFtpControlSocket::ResetOperation(2114) 2014-04-03 21:38:58 13820 3 Trace: CControlSocket::ResetOperation(2114) 2014-04-03 21:38:58 13820 3 Error: Failed to retrieve directory listing

2014-04-05 12:04:39 1888 3 Status: Resolving address of post768.org 2014-04-05 12:04:39 1888 3 Status: Connection attempt failed with "EAI_NODATA - No address associated with nodename". 2014-04-05 12:04:39 1888 3 Trace: CRealControlSocket::OnClose(11004) 2014-04-05 12:04:39 1888 3 Trace: CFtpControlSocket::ResetOperation(66) 2014-04-05 12:04:39 1888 3 Trace: CControlSocket::ResetOperation(66) 2014-04-05 12:04:39 1888 3 Error: Could not connect to server 2014-04-05 12:04:39 1888 3 Status: Waiting to retry... 2014-04-05 12:04:44 1888 3 Status: Resolving address of post768.org 2014-04-05 12:04:44 1888 3 Status: Connection attempt failed with "EAI_NODATA - No address associated with nodename". 2014-04-05 12:04:44 1888 3 Trace: CRealControlSocket::OnClose(11004) 2014-04-05 12:04:44 1888 3 Trace: CFtpControlSocket::ResetOperation(66) 2014-04-05 12:04:44 1888 3 Trace: CControlSocket::ResetOperation(66) 2014-04-05 12:04:44 1888 3 Error: Could not connect to server 2014-04-05 12:05:11 1888 3 Status: Resolving address of post768.org 2014-04-05 12:05:11 1888 3 Status: Connection attempt failed with "EAI_NODATA - No address associated with nodename". 2014-04-05 12:05:11 1888 3 Trace: CRealControlSocket::OnClose(11004) 2014-04-05 12:05:11 1888 3 Trace: CFtpControlSocket::ResetOperation(66) 2014-04-05 12:05:11 1888 3 Trace: CControlSocket::ResetOperation(66) 2014-04-05 12:05:11 1888 3 Error: Could not connect to server 2014-04-05 12:05:11 1888 3 Status: Waiting to retry... 2014-04-05 12:05:16 1888 3 Status: Delaying connection for 1 second due to previously failed connection attempt... 2014-04-05 12:05:16 1888 3 Status: Resolving address of post768.org 2014-04-05 12:05:16 1888 3 Status: Connection attempt failed with "EAI_NODATA - No address associated with nodename". 2014-04-05 12:05:16 1888 3 Trace: CRealControlSocket::OnClose(11004) 2014-04-05 12:05:16 1888 3 Trace: CFtpControlSocket::ResetOperation(66) 2014-04-05 12:05:16 1888 3 Trace: CControlSocket::ResetOperation(66) 2014-04-05 12:05:16 1888 3 Error: Could not connect to server 2014-04-05 12:16:10 2364 3 Status: Resolving address of post768.org 2014-04-05 12:16:12 2364 3 Status: Connecting to 184.168.164.1:21... 2014-04-05 12:16:21 2364 3 Status: Connection established, waiting for welcome message... 2014-04-05 12:16:21 2364 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 12:16:21 2364 3 Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- 2014-04-05 12:16:21 2364 3 Response: 220-You are user number 6 of 500 allowed. 2014-04-05 12:16:21 2364 3 Response: 220-Local time is now 09:16. Server port: 21. 2014-04-05 12:16:21 2364 3 Response: 220-This is a private system - No anonymous login 2014-04-05 12:16:21 2364 3 Response: 220 You will be disconnected after 3 minutes of inactivity. 2014-04-05 12:16:21 2364 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 12:16:21 2364 3 Command: USER d9ee6681 2014-04-05 12:16:22 2364 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 12:16:22 2364 3 Response: 331 User d9ee6681 OK. Password required 2014-04-05 12:16:22 2364 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 12:16:22 2364 3 Command: PASS * 2014-04-05 12:16:23 2364 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 12:16:23 2364 3 Response: 230 OK. Current restricted directory is / 2014-04-05 12:16:23 2364 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 12:16:23 2364 3 Command: SYST 2014-04-05 12:16:23 2364 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 12:16:23 2364 3 Response: 215 UNIX Type: L8 2014-04-05 12:16:23 2364 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 12:16:23 2364 3 Command: FEAT 2014-04-05 12:16:24 2364 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 12:16:24 2364 3 Response: 211-Extensions supported: 2014-04-05 12:16:24 2364 3 Response: EPRT 2014-04-05 12:16:24 2364 3 Response: IDLE 2014-04-05 12:16:24 2364 3 Response: MDTM 2014-04-05 12:16:24 2364 3 Response: SIZE 2014-04-05 12:16:24 2364 3 Response: MFMT 2014-04-05 12:16:24 2364 3 Response: REST STREAM 2014-04-05 12:16:24 2364 3 Response: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; 2014-04-05 12:16:24 2364 3 Response: MLSD 2014-04-05 12:16:24 2364 3 Response: AUTH TLS 2014-04-05 12:16:24 2364 3 Response: PBSZ 2014-04-05 12:16:24 2364 3 Response: PROT 2014-04-05 12:16:24 2364 3 Response: UTF8 2014-04-05 12:16:24 2364 3 Response: ESTA 2014-04-05 12:16:24 2364 3 Response: PASV 2014-04-05 12:16:24 2364 3 Response: EPSV 2014-04-05 12:16:24 2364 3 Response: SPSV 2014-04-05 12:16:24 2364 3 Response: ESTP 2014-04-05 12:16:24 2364 3 Response: 211 End. 2014-04-05 12:16:24 2364 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 12:16:24 2364 3 Command: OPTS UTF8 ON 2014-04-05 12:16:25 2364 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 12:16:25 2364 3 Response: 200 OK, UTF-8 enabled 2014-04-05 12:16:25 2364 3 Status: Connected 2014-04-05 12:16:25 2364 3 Trace: CFtpControlSocket::ResetOperation(0) 2014-04-05 12:16:25 2364 3 Trace: CControlSocket::ResetOperation(0) 2014-04-05 12:16:25 2364 3 Trace: Measured latency of 731 ms 2014-04-05 12:16:25 2364 3 Status: Retrieving directory listing... 2014-04-05 12:16:25 2364 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 12:16:25 2364 3 Trace: CFtpControlSocket::ChangeDirSend() 2014-04-05 12:16:25 2364 3 Command: PWD 2014-04-05 12:16:26 2364 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 12:16:26 2364 3 Response: 257 "/" is your current location 2014-04-05 12:16:26 2364 3 Trace: CFtpControlSocket::ResetOperation(0) 2014-04-05 12:16:26 2364 3 Trace: CControlSocket::ResetOperation(0) 2014-04-05 12:16:26 2364 3 Trace: CFtpControlSocket::ParseSubcommandResult(0) 2014-04-05 12:16:26 2364 3 Trace: CFtpControlSocket::ListSubcommandResult() 2014-04-05 12:16:26 2364 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 12:16:26 2364 3 Trace: CFtpControlSocket::TransferSend() 2014-04-05 12:16:26 2364 3 Command: TYPE I 2014-04-05 12:16:26 2364 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 12:16:26 2364 3 Response: 200 TYPE is now 8-bit binary 2014-04-05 12:16:26 2364 3 Trace: CFtpControlSocket::TransferParseResponse() 2014-04-05 12:16:26 2364 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 12:16:26 2364 3 Trace: CFtpControlSocket::TransferSend() 2014-04-05 12:16:26 2364 3 Command: PASV 2014-04-05 12:16:27 2364 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 12:16:27 2364 3 Response: 227 Entering Passive Mode (184,168,164,1,196,120) 2014-04-05 12:16:27 2364 3 Trace: CFtpControlSocket::TransferParseResponse() 2014-04-05 12:16:27 2364 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 12:16:27 2364 3 Trace: CFtpControlSocket::TransferSend() 2014-04-05 12:16:27 2364 3 Command: MLSD 2014-04-05 12:16:28 2364 3 Trace: CTransferSocket::OnConnect 2014-04-05 12:16:35 2364 3 Trace: CTransferSocket::OnClose(10053) 2014-04-05 12:16:35 2364 3 Error: Transfer connection interrupted: ECONNABORTED - Connection aborted 2014-04-05 12:16:35 2364 3 Trace: CTransferSocket::TransferEnd(3) 2014-04-05 12:16:35 2364 3 Trace: CFtpControlSocket::TransferEnd() 2014-04-05 12:17:20 2364 3 Trace: CFtpControlSocket::ResetOperation(10) 2014-04-05 12:17:20 2364 3 Trace: CControlSocket::ResetOperation(10) 2014-04-05 12:17:20 2364 3 Trace: CFtpControlSocket::ResetOperation(10) 2014-04-05 12:17:20 2364 3 Trace: CControlSocket::ResetOperation(10) 2014-04-05 12:17:20 2364 3 Error: Directory listing aborted by user 2014-04-05 12:17:20 2364 3 Status: Disconnected from server 2014-04-05 12:17:20 2364 3 Trace: CFtpControlSocket::ResetOperation(66) 2014-04-05 12:17:20 2364 3 Trace: CControlSocket::ResetOperation(66) 2014-04-05 12:17:20 2364 3 Status: Resolving address of post768.org 2014-04-05 12:17:20 2364 3 Status: Connecting to 184.168.164.1:21... 2014-04-05 12:17:21 2364 3 Status: Connection established, waiting for welcome message... 2014-04-05 12:17:21 2364 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 12:17:21 2364 3 Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- 2014-04-05 12:17:21 2364 3 Response: 220-You are user number 7 of 500 allowed. 2014-04-05 12:17:21 2364 3 Response: 220-Local time is now 09:17. Server port: 21. 2014-04-05 12:17:21 2364 3 Response: 220-This is a private system - No anonymous login 2014-04-05 12:17:21 2364 3 Response: 220 You will be disconnected after 3 minutes of inactivity. 2014-04-05 12:17:21 2364 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 12:17:21 2364 3 Command: USER d9ee6681 2014-04-05 12:17:22 2364 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 12:17:22 2364 3 Response: 331 User d9ee6681 OK. Password required 2014-04-05 12:17:22 2364 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 12:17:22 2364 3 Command: PASS * 2014-04-05 12:17:23 2364 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 12:17:23 2364 3 Response: 230 OK. Current restricted directory is / 2014-04-05 12:17:23 2364 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 12:17:23 2364 3 Command: OPTS UTF8 ON 2014-04-05 12:17:24 2364 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 12:17:24 2364 3 Response: 200 OK, UTF-8 enabled 2014-04-05 12:17:24 2364 3 Status: Connected 2014-04-05 12:17:24 2364 3 Trace: CFtpControlSocket::ResetOperation(0) 2014-04-05 12:17:24 2364 3 Trace: CControlSocket::ResetOperation(0) 2014-04-05 12:17:24 2364 3 Trace: Measured latency of 726 ms 2014-04-05 12:17:24 2364 3 Status: Retrieving directory listing... 2014-04-05 12:17:24 2364 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 12:17:24 2364 3 Trace: CFtpControlSocket::ChangeDirSend() 2014-04-05 12:17:24 2364 3 Command: PWD 2014-04-05 12:17:24 2364 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 12:17:24 2364 3 Response: 257 "/" is your current location 2014-04-05 12:17:24 2364 3 Trace: CFtpControlSocket::ResetOperation(0) 2014-04-05 12:17:24 2364 3 Trace: CControlSocket::ResetOperation(0) 2014-04-05 12:17:24 2364 3 Trace: CFtpControlSocket::ParseSubcommandResult(0) 2014-04-05 12:17:24 2364 3 Trace: CFtpControlSocket::ListSubcommandResult() 2014-04-05 12:17:24 2364 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 12:17:24 2364 3 Trace: CFtpControlSocket::TransferSend() 2014-04-05 12:17:24 2364 3 Command: TYPE I 2014-04-05 12:17:25 2364 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 12:17:25 2364 3 Response: 200 TYPE is now 8-bit binary 2014-04-05 12:17:25 2364 3 Trace: CFtpControlSocket::TransferParseResponse() 2014-04-05 12:17:25 2364 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 12:17:25 2364 3 Trace: CFtpControlSocket::TransferSend() 2014-04-05 12:17:25 2364 3 Command: PASV 2014-04-05 12:17:26 2364 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 12:17:26 2364 3 Response: 227 Entering Passive Mode (184,168,164,1,197,214) 2014-04-05 12:17:26 2364 3 Trace: CFtpControlSocket::TransferParseResponse() 2014-04-05 12:17:26 2364 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 12:17:26 2364 3 Trace: CFtpControlSocket::TransferSend() 2014-04-05 12:17:26 2364 3 Command: MLSD 2014-04-05 12:17:26 2364 3 Trace: CTransferSocket::OnConnect 2014-04-05 12:17:33 2364 3 Trace: CTransferSocket::OnClose(10053) 2014-04-05 12:17:33 2364 3 Error: Transfer connection interrupted: ECONNABORTED - Connection aborted 2014-04-05 12:17:33 2364 3 Trace: CTransferSocket::TransferEnd(3) 2014-04-05 12:17:33 2364 3 Trace: CFtpControlSocket::TransferEnd() 2014-04-05 12:18:23 2364 3 Trace: CFtpControlSocket::ResetOperation(10) 2014-04-05 12:18:23 2364 3 Trace: CControlSocket::ResetOperation(10) 2014-04-05 12:18:23 2364 3 Trace: CFtpControlSocket::ResetOperation(10) 2014-04-05 12:18:23 2364 3 Trace: CControlSocket::ResetOperation(10) 2014-04-05 12:18:23 2364 3 Error: Directory listing aborted by user 2014-04-05 12:20:26 2364 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 12:20:26 2364 3 Response: 421 Timeout (no new data for 180 seconds) 2014-04-05 12:20:26 2364 3 Trace: Skipping reply after cancelled operation or keepalive command. 2014-04-05 12:20:26 2364 3 Error: Connection closed by server 2014-04-05 12:20:26 2364 3 Trace: CFtpControlSocket::ResetOperation(66) 2014-04-05 12:20:26 2364 3 Trace: CControlSocket::ResetOperation(66) 2014-04-05 14:02:00 540 3 Status: Resolving address of post768.org 2014-04-05 14:02:01 540 3 Status: Connecting to 184.168.164.1:21... 2014-04-05 14:02:02 540 3 Status: Connection established, waiting for welcome message... 2014-04-05 14:02:02 540 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 14:02:02 540 3 Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- 2014-04-05 14:02:02 540 3 Response: 220-You are user number 5 of 500 allowed. 2014-04-05 14:02:02 540 3 Response: 220-Local time is now 11:02. Server port: 21. 2014-04-05 14:02:02 540 3 Response: 220-This is a private system - No anonymous login 2014-04-05 14:02:02 540 3 Response: 220 You will be disconnected after 3 minutes of inactivity. 2014-04-05 14:02:02 540 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 14:02:02 540 3 Command: USER d9ee6681 2014-04-05 14:02:03 540 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 14:02:03 540 3 Response: 331 User d9ee6681 OK. Password required 2014-04-05 14:02:03 540 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 14:02:03 540 3 Command: PASS * 2014-04-05 14:02:04 540 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 14:02:04 540 3 Response: 230 OK. Current restricted directory is / 2014-04-05 14:02:04 540 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 14:02:04 540 3 Command: SYST 2014-04-05 14:02:05 540 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 14:02:05 540 3 Response: 215 UNIX Type: L8 2014-04-05 14:02:05 540 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 14:02:05 540 3 Command: FEAT 2014-04-05 14:02:05 540 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 14:02:05 540 3 Response: 211-Extensions supported: 2014-04-05 14:02:05 540 3 Response: EPRT 2014-04-05 14:02:05 540 3 Response: IDLE 2014-04-05 14:02:05 540 3 Response: MDTM 2014-04-05 14:02:05 540 3 Response: SIZE 2014-04-05 14:02:05 540 3 Response: MFMT 2014-04-05 14:02:05 540 3 Response: REST STREAM 2014-04-05 14:02:05 540 3 Response: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; 2014-04-05 14:02:05 540 3 Response: MLSD 2014-04-05 14:02:05 540 3 Response: AUTH TLS 2014-04-05 14:02:05 540 3 Response: PBSZ 2014-04-05 14:02:05 540 3 Response: PROT 2014-04-05 14:02:05 540 3 Response: UTF8 2014-04-05 14:02:05 540 3 Response: ESTA 2014-04-05 14:02:05 540 3 Response: PASV 2014-04-05 14:02:05 540 3 Response: EPSV 2014-04-05 14:02:05 540 3 Response: SPSV 2014-04-05 14:02:05 540 3 Response: ESTP 2014-04-05 14:02:05 540 3 Response: 211 End. 2014-04-05 14:02:05 540 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 14:02:05 540 3 Command: OPTS UTF8 ON 2014-04-05 14:02:06 540 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 14:02:06 540 3 Response: 200 OK, UTF-8 enabled 2014-04-05 14:02:06 540 3 Status: Connected 2014-04-05 14:02:06 540 3 Trace: CFtpControlSocket::ResetOperation(0) 2014-04-05 14:02:06 540 3 Trace: CControlSocket::ResetOperation(0) 2014-04-05 14:02:06 540 3 Trace: Measured latency of 710 ms 2014-04-05 14:02:06 540 3 Status: Retrieving directory listing... 2014-04-05 14:02:06 540 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 14:02:06 540 3 Trace: CFtpControlSocket::ChangeDirSend() 2014-04-05 14:02:06 540 3 Command: PWD 2014-04-05 14:02:07 540 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 14:02:07 540 3 Response: 257 "/" is your current location 2014-04-05 14:02:07 540 3 Trace: CFtpControlSocket::ResetOperation(0) 2014-04-05 14:02:07 540 3 Trace: CControlSocket::ResetOperation(0) 2014-04-05 14:02:07 540 3 Trace: CFtpControlSocket::ParseSubcommandResult(0) 2014-04-05 14:02:07 540 3 Trace: CFtpControlSocket::ListSubcommandResult() 2014-04-05 14:02:07 540 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 14:02:07 540 3 Trace: CFtpControlSocket::TransferSend() 2014-04-05 14:02:07 540 3 Command: TYPE I 2014-04-05 14:02:07 540 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 14:02:07 540 3 Response: 200 TYPE is now 8-bit binary 2014-04-05 14:02:07 540 3 Trace: CFtpControlSocket::TransferParseResponse() 2014-04-05 14:02:07 540 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 14:02:07 540 3 Trace: CFtpControlSocket::TransferSend() 2014-04-05 14:02:07 540 3 Command: PASV 2014-04-05 14:02:08 540 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 14:02:08 540 3 Response: 227 Entering Passive Mode (184,168,164,1,196,116) 2014-04-05 14:02:08 540 3 Trace: CFtpControlSocket::TransferParseResponse() 2014-04-05 14:02:08 540 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 14:02:08 540 3 Trace: CFtpControlSocket::TransferSend() 2014-04-05 14:02:08 540 3 Command: MLSD 2014-04-05 14:02:08 540 3 Trace: CTransferSocket::OnConnect 2014-04-05 14:02:15 540 3 Trace: CTransferSocket::OnClose(10053) 2014-04-05 14:02:15 540 3 Error: Transfer connection interrupted: ECONNABORTED - Connection aborted 2014-04-05 14:02:15 540 3 Trace: CTransferSocket::TransferEnd(3) 2014-04-05 14:02:15 540 3 Trace: CFtpControlSocket::TransferEnd() 2014-04-05 14:02:57 540 3 Trace: CFtpControlSocket::ResetOperation(10) 2014-04-05 14:02:57 540 3 Trace: CControlSocket::ResetOperation(10) 2014-04-05 14:02:57 540 3 Trace: CFtpControlSocket::ResetOperation(10) 2014-04-05 14:02:57 540 3 Trace: CControlSocket::ResetOperation(10) 2014-04-05 14:02:57 540 3 Error: Directory listing aborted by user 2014-04-05 14:02:57 540 3 Status: Disconnected from server 2014-04-05 14:02:57 540 3 Trace: CFtpControlSocket::ResetOperation(66) 2014-04-05 14:02:57 540 3 Trace: CControlSocket::ResetOperation(66) 2014-04-05 14:02:57 540 3 Status: Resolving address of post768.org 2014-04-05 14:02:57 540 3 Status: Connecting to 184.168.164.1:21... 2014-04-05 14:02:57 540 3 Status: Connection established, waiting for welcome message... 2014-04-05 14:02:58 540 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 14:02:58 540 3 Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- 2014-04-05 14:02:58 540 3 Response: 220-You are user number 7 of 500 allowed. 2014-04-05 14:02:58 540 3 Response: 220-Local time is now 11:03. Server port: 21. 2014-04-05 14:02:58 540 3 Response: 220-This is a private system - No anonymous login 2014-04-05 14:02:58 540 3 Response: 220 You will be disconnected after 3 minutes of inactivity. 2014-04-05 14:02:58 540 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 14:02:58 540 3 Command: USER d9ee6681 2014-04-05 14:02:59 540 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 14:02:59 540 3 Response: 331 User d9ee6681 OK. Password required 2014-04-05 14:02:59 540 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 14:02:59 540 3 Command: PASS * 2014-04-05 14:03:00 540 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 14:03:00 540 3 Response: 230 OK. Current restricted directory is / 2014-04-05 14:03:00 540 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 14:03:00 540 3 Command: OPTS UTF8 ON 2014-04-05 14:03:00 540 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 14:03:00 540 3 Response: 200 OK, UTF-8 enabled 2014-04-05 14:03:00 540 3 Status: Connected 2014-04-05 14:03:00 540 3 Trace: CFtpControlSocket::ResetOperation(0) 2014-04-05 14:03:00 540 3 Trace: CControlSocket::ResetOperation(0) 2014-04-05 14:03:00 540 3 Trace: Measured latency of 675 ms 2014-04-05 14:03:00 540 3 Status: Retrieving directory listing... 2014-04-05 14:03:00 540 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 14:03:00 540 3 Trace: CFtpControlSocket::ChangeDirSend() 2014-04-05 14:03:00 540 3 Command: PWD 2014-04-05 14:03:01 540 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 14:03:01 540 3 Response: 257 "/" is your current location 2014-04-05 14:03:01 540 3 Trace: CFtpControlSocket::ResetOperation(0) 2014-04-05 14:03:01 540 3 Trace: CControlSocket::ResetOperation(0) 2014-04-05 14:03:01 540 3 Trace: CFtpControlSocket::ParseSubcommandResult(0) 2014-04-05 14:03:01 540 3 Trace: CFtpControlSocket::ListSubcommandResult() 2014-04-05 14:03:01 540 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 14:03:01 540 3 Trace: CFtpControlSocket::TransferSend() 2014-04-05 14:03:01 540 3 Command: TYPE I 2014-04-05 14:03:02 540 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 14:03:02 540 3 Response: 200 TYPE is now 8-bit binary 2014-04-05 14:03:02 540 3 Trace: CFtpControlSocket::TransferParseResponse() 2014-04-05 14:03:02 540 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 14:03:02 540 3 Trace: CFtpControlSocket::TransferSend() 2014-04-05 14:03:02 540 3 Command: PASV 2014-04-05 14:03:02 540 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 14:03:02 540 3 Response: 227 Entering Passive Mode (184,168,164,1,197,141) 2014-04-05 14:03:02 540 3 Trace: CFtpControlSocket::TransferParseResponse() 2014-04-05 14:03:02 540 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 14:03:02 540 3 Trace: CFtpControlSocket::TransferSend() 2014-04-05 14:03:02 540 3 Command: MLSD 2014-04-05 14:03:02 540 3 Trace: CTransferSocket::OnConnect 2014-04-05 14:03:09 540 3 Trace: CTransferSocket::OnClose(10053) 2014-04-05 14:03:09 540 3 Error: Transfer connection interrupted: ECONNABORTED - Connection aborted 2014-04-05 14:03:09 540 3 Trace: CTransferSocket::TransferEnd(3) 2014-04-05 14:03:09 540 3 Trace: CFtpControlSocket::TransferEnd() 2014-04-05 14:04:03 540 3 Error: Connection timed out 2014-04-05 14:04:03 540 3 Trace: CFtpControlSocket::ResetOperation(2114) 2014-04-05 14:04:03 540 3 Trace: CControlSocket::ResetOperation(2114) 2014-04-05 14:04:03 540 3 Trace: CFtpControlSocket::ResetOperation(2114) 2014-04-05 14:04:03 540 3 Trace: CControlSocket::ResetOperation(2114) 2014-04-05 14:04:03 540 3 Error: Failed to retrieve directory listing 2014-04-05 14:16:13 540 3 Status: Connecting to 184.168.164.1:21... 2014-04-05 14:16:13 540 3 Status: Connection established, waiting for welcome message... 2014-04-05 14:16:14 540 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 14:16:14 540 3 Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- 2014-04-05 14:16:14 540 3 Response: 220-You are user number 7 of 500 allowed. 2014-04-05 14:16:14 540 3 Response: 220-Local time is now 11:16. Server port: 21. 2014-04-05 14:16:14 540 3 Response: 220-This is a private system - No anonymous login 2014-04-05 14:16:14 540 3 Response: 220 You will be disconnected after 3 minutes of inactivity. 2014-04-05 14:16:14 540 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 14:16:14 540 3 Command: USER d9ee6681 2014-04-05 14:16:15 540 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 14:16:15 540 3 Response: 331 User d9ee6681 OK. Password required 2014-04-05 14:16:15 540 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 14:16:15 540 3 Command: PASS * 2014-04-05 14:16:15 540 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 14:16:15 540 3 Response: 230 OK. Current restricted directory is / 2014-04-05 14:16:15 540 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 14:16:15 540 3 Command: SYST 2014-04-05 14:16:16 540 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 14:16:16 540 3 Response: 215 UNIX Type: L8 2014-04-05 14:16:16 540 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 14:16:16 540 3 Command: FEAT 2014-04-05 14:16:17 540 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 14:16:17 540 3 Response: 211-Extensions supported: 2014-04-05 14:16:17 540 3 Response: EPRT 2014-04-05 14:16:17 540 3 Response: IDLE 2014-04-05 14:16:17 540 3 Response: MDTM 2014-04-05 14:16:17 540 3 Response: SIZE 2014-04-05 14:16:17 540 3 Response: MFMT 2014-04-05 14:16:17 540 3 Response: REST STREAM 2014-04-05 14:16:17 540 3 Response: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; 2014-04-05 14:16:17 540 3 Response: MLSD 2014-04-05 14:16:17 540 3 Response: AUTH TLS 2014-04-05 14:16:17 540 3 Response: PBSZ 2014-04-05 14:16:17 540 3 Response: PROT 2014-04-05 14:16:17 540 3 Response: UTF8 2014-04-05 14:16:17 540 3 Response: ESTA 2014-04-05 14:16:17 540 3 Response: PASV 2014-04-05 14:16:17 540 3 Response: EPSV 2014-04-05 14:16:17 540 3 Response: SPSV 2014-04-05 14:16:17 540 3 Response: ESTP 2014-04-05 14:16:17 540 3 Response: 211 End. 2014-04-05 14:16:17 540 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 14:16:17 540 3 Command: OPTS UTF8 ON 2014-04-05 14:16:18 540 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 14:16:18 540 3 Response: 200 OK, UTF-8 enabled 2014-04-05 14:16:18 540 3 Status: Connected 2014-04-05 14:16:18 540 3 Trace: CFtpControlSocket::ResetOperation(0) 2014-04-05 14:16:18 540 3 Trace: CControlSocket::ResetOperation(0) 2014-04-05 14:16:18 540 3 Trace: Measured latency of 768 ms 2014-04-05 14:16:18 540 3 Status: Retrieving directory listing... 2014-04-05 14:16:18 540 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 14:16:18 540 3 Trace: CFtpControlSocket::ChangeDirSend() 2014-04-05 14:16:18 540 3 Command: PWD 2014-04-05 14:16:18 540 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 14:16:18 540 3 Response: 257 "/" is your current location 2014-04-05 14:16:18 540 3 Trace: CFtpControlSocket::ResetOperation(0) 2014-04-05 14:16:18 540 3 Trace: CControlSocket::ResetOperation(0) 2014-04-05 14:16:18 540 3 Trace: CFtpControlSocket::ParseSubcommandResult(0) 2014-04-05 14:16:18 540 3 Trace: CFtpControlSocket::ListSubcommandResult() 2014-04-05 14:16:18 540 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 14:16:18 540 3 Trace: CFtpControlSocket::TransferSend() 2014-04-05 14:16:18 540 3 Command: TYPE I 2014-04-05 14:16:19 540 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 14:16:19 540 3 Response: 200 TYPE is now 8-bit binary 2014-04-05 14:16:19 540 3 Trace: CFtpControlSocket::TransferParseResponse() 2014-04-05 14:16:19 540 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 14:16:19 540 3 Trace: CFtpControlSocket::TransferSend() 2014-04-05 14:16:19 540 3 Command: PASV 2014-04-05 14:16:20 540 3 Trace: CFtpControlSocket::OnReceive() 2014-04-05 14:16:20 540 3 Response: 227 Entering Passive Mode (184,168,164,1,197,235) 2014-04-05 14:16:20 540 3 Trace: CFtpControlSocket::TransferParseResponse() 2014-04-05 14:16:20 540 3 Trace: CFtpControlSocket::SendNextCommand() 2014-04-05 14:16:20 540 3 Trace: CFtpControlSocket::TransferSend() 2014-04-05 14:16:20 540 3 Command: MLSD 2014-04-05 14:16:20 540 3 Trace: CTransferSocket::OnConnect 2014-04-05 14:16:27 540 3 Trace: CTransferSocket::OnClose(10053) 2014-04-05 14:16:27 540 3 Error: Transfer connection interrupted: ECONNABORTED - Connection aborted 2014-04-05 14:16:27 540 3 Trace: CTransferSocket::TransferEnd(3) 2014-04-05 14:16:27 540 3 Trace: CFtpControlSocket::TransferEnd() 2014-04-05 14:17:21 540 3 Error: Connection timed out 2014-04-05 14:17:21 540 3 Trace: CFtpControlSocket::ResetOperation(2114) 2014-04-05 14:17:21 540 3 Trace: CControlSocket::ResetOperation(2114) 2014-04-05 14:17:21 540 3 Trace: CFtpControlSocket::ResetOperation(2114) 2014-04-05 14:17:21 540 3 Trace: CControlSocket::ResetOperation(2114) 2014-04-05 14:17:21 540 3 Error: Failed to retrieve directory listing

When logging into my work server I need to log in twice. The first time it always hangs at the:- "command Type 1" When logging in again it gives me the option of cancelling the current log in and retrying. When I select this it then completes the log in and it works fine. This fault has been apparent since an Filezilla upgrade some months back.

A ticket from 2 months ago reads fixed. I have yet to see the fix in the latest version. Every time I switch to the FileZilla window, I automatically have to select "No" every time. Dialog box reads: "A file previously opened has been changed." Then the option, "Upload this file to the server?". It is quite frustrating and sends files all over my directories if I select the default "Yes".

I've made no changes to FileZilla. PC is clean of viruses/malware per a full scan. Trying to download current website content in prep for monthly updates. Filezilla pauses then restarts, but after a few iterations of this gives the error message: "421 Too many connections (8) from this IP"

The full listing is:

Waiting to retry... Resolving address if hbartleague.org Connecting to 74.124.197.191.21... Connection established, waiting for welcome message... 421 Too many connections (8) from this IP Could not connect to server

My host checked on their end, and noted that if their server wasn't clearing connection, it'd crash soon. Kinda makes sense.

Their only suggestion was to reinstall FileZilla, suggesting that a config file has become corrupted. Is this my only option?

With Version 3.8.0 FileZilla will become unresponsive and cease file transfers - the process has to be terminated via task manager (Windows 7) - I have had to roll back to 3.7.4.1 - with this version I experience no issues whatsoever.

When browsing our SFTP server using filezilla v3.8.0 on Windows the year in the modified date field is showing as 2014 when the correct date is actually 2013. I have confirmed the date is correct on the actual file and by browsing using Cyberduck and the date s only wrong when using filezilla.

Connexion à probe.filezilla-project.org Réponse : 220 FZ router and firewall tester ready USER FileZilla Réponse : 331 Give any password. PASS 3.8.0 Réponse : 230 logged on. Vérification de l'adresse IP externe correcte IP 85.168.35.141 if-bgi-df-beb Réponse : 200 OK PREP 6301 Réponse : 200 Using port 6301, data token 1953835025 PORT 85,168,35,141,24,157 Délai d'attente expiré. Connexion interrompue =========================================== FAI : Numericable (labox) Web navigator : FireFox 29.0.1 FTP : FileZilla_3.8.0_win32-setup.exe Sys.Expl. : Windows 7 Antivirus : Viruskeeper 2014 ultimate Firewall : Wincerber firewall 2014

Hi There,

I have recently bought a new laptop, and having been a long time user of FileZilla I have noticed a problem. When using other programs such as chrome - the F1-F12 buttons work as usual (F5 Refreshes the page, f2 to edit etc), however in FileZilla they default to the laptop keys (such as brightness and volume).

I hope this makes sense.

After updating to the 3.8.1 version it's not possible to browse or copy files with cyrillic names - "No such file or directory ". UTF-8 is set in configuration.

In Filezilla client on Ubuntu 12.04 LTS, when I want to rename a file, I right click it or I click twice the file slowly, the file name is now selectable, I am able to rename the file, but if I right click the selected file name the program is like frozen, you can not do anything but kill it with the PID. Normally a menu should open where you can copy cut or paste for example, but here it simply does not open a menu, it just freeze the program.

After several years of satisfaction of an excellent product, I found the following issue in the last version: It makes Windows explorer crash when clicking right button (Win 7 32 bit) , with the following result (from event log): --- Nombre de la aplicación con errores: Explorer.EXE, versión: 6.1.7601.17567, marca de tiempo: 0x4d6727a7 Nombre del módulo con errores: ntdll.dll, versión: 6.1.7601.18247, marca de tiempo: 0x521ea91c Código de excepción: 0xc0000005 Desplazamiento de errores: 0x0001f9e2 Id. del proceso con errores: 0xbdc Hora de inicio de la aplicación con errores: 0x01cf8cac208c6a5f Ruta de acceso de la aplicación con errores: C:\Windows\Explorer.EXE Ruta de acceso del módulo con errores: C:\Windows\SYSTEM32\ntdll.dll Id. del informe: 79185d62-f89f-11e3-a81c-eca86b715b7e --- It makes crash with right click is used on any file. And I found that only when uninstalling AND deleting the following files BY HAND, the issue disappears: --- fzshellext.dll libgcc_s_sjlj-1.dll libstdc++-6.dll libwinpthread-1.dll --- In fact, I selected "Uninstall " and after process finished, it asked to reboot. Upon restart, the directory where the program was installed is full with all the files, and the issue persisted. I manually deleted all the files, but the previously mentioned were not deleted, indicating that they were used by Windows. I had to reboot to the option "Safe mode with command prompt" in order to be able to delete the files and directory. Then, after a check with CCleaner, one key remained in registry: --- ActiveX/COM Issue InProcServer32\ C:\Program Files\FileZilla FTP Client\fzshellext.dll HKCR\CLSID\{DB70412E-EEC9-479C-BBA9-BE36BFDDA41B} --- And it was deleted manually too. All the above procedure was made TWICE, because after the first time, I reinstalled the new version, hoping that it has been only a defective installation but it has not. I hope that it is corrected for the next version because it is a very useful tool. Thank you in advance.

Please make a filezilla for 32bit/64bit ARM as a download. Compiling is too complicated and I would like to use latest filezilla on ARM desktop.

If an sftp connection is left open at the client and closed by the server? any attempt to refresh the remote directory display or reconnect will crash the client.

Dear Team,

We have restricted the user to their home directory in ftpaccess.ctl. User is able to list the files when using FTP in Command Prompt whereas the same is not working while connecting using Filezilla 3.7.4.1.

Please advice on the changes to be made in Filezilla Client.

I am getting Following error 421 Sorry, cleartext sessions are not accepted on this server

I am trying to transfer an image but I get this icon see attachment. The file appears on the server with 0 bytes.The file is not empty

I upgraded from FileZilla 3.7.3 to 3.8.0. Upon startup, I receive the message that FileZilla is unable to find its resources, suggesting that this can be overcome by setting the FZ_DATADIR environment variable (presumably to point at \Program Files (x86)\Filezilla\resources) or by providing the --datadir command-line option. Neither of these help. Indeed, using the --datadir command-line option posts an error message "Unknown long option 'datadir'".

Downgrading to 3.7.3 provides a workaround.

I'm using 10.9.4 Mavericks, and te latest version of Filezilla has issues with 'overscan'

Adjusting resolution, then switching back solves this issue.

Recently when I have uploaded files, the modification date on the remote site has not changed. The latest date shown is 06/07/2014 although several files have been updated since then

It would be cool if there was a feature that populated the quick connect input boxes with the last site so you could just click quick connect if you wanted to go to the same site you were last logged into.

Thanks

I am unable to copy the filepath for Local Site or Remote Site as I was in earlier versions of FileZilla. I use this feature every day to send the location of files on our ftp to other members of my team. Can you look into it?

Today I've downloaded the new filezilla version and since then I can't seem to open any file, How can I solve this problem? Thanks