Custom Query (8171 matches)

FTP boost mode in FileZilla Client (like QWIX)

Avalaunch (a homebrew dashboard for modded Xboxes) has a built-in custom FTP-server that has a very nice feature called BOOST mode. Boost mode only works if both the FTP-server and the FTP-client supports it. What boost mode does is basically send a list (from the client to the server) of all files from the transfer-list making new connection/session for each file unessesary, resulting in a much faster overall transfer speed when transfering many small files (like example a complete and large website, or text files, or even loads of MP3 files over a fast connection). Team-Avalaunch the makers of the Avalaunch dashboard also make a FTP-client called QWIX which supports this boost mode.

Team-Avalaunch has made the specifications of this BOOST mode open source to enable others to implement support of it into their FTP servers and clients, found here: ​http://forums.xbox-scene.com/index.php?showtopic=137059

Team-Ava's website: ​http://www.teamavalaunch.com

From Avalaunch FAQ (a bit old now as more supports it): Q: What is Boost Mode? A: Boost Mode is an improved FTP protocol that is currently only supported with Avalaunch. It can make transfers push the limits of your 100Mb connection, and is especially helpful with transfers that contain a lot of small files."

PS! Some others that supports this boost mode is: SUXX, UnleashX, C-XBOXtool

Avalaunch (a homebrew dashboard for modded Xboxes) has a built-in custom FTP-server that has a very nice feature called BOOST mode. Boost mode only works if both the FTP-server and the FTP-client supports it. What boost mode does is basically send a list (from the client to the server) of all files from the transfer-list making new connection/session for each file unessesary, resulting in a much faster overall transfer speed when transfering many small files (like example a complete and large website, or text files, or even loads of MP3 files over a fast connection). Team-Avalaunch the makers of the Avalaunch dashboard also make a FTP-client called QWIX which supports this boost mode.

Team-Avalaunch has made the specifications of this BOOST mode open source to enable others to implement support of it into their FTP servers and clients, found here: ​http://forums.xbox-scene.com/index.php?showtopic=137059

Team-Ava's website: ​http://www.teamavalaunch.com

From Avalaunch FAQ (a bit old now as more supports it): Q: What is Boost Mode? A: Boost Mode is an improved FTP protocol that is currently only supported with Avalaunch. It can make transfers push the limits of your 100Mb connection, and is especially helpful with transfers that contain a lot of small files."

PS! Some others that supports this boost mode is: SUXX, UnleashX, C-XBOXtool

In downloading a 26 MB file from an FTP site the process starts and then terminates with only 2 to 4 MB downloaded. It does not report any problem with the download and implies that the entire download was successful.

Tried this many times but the result was the same.

I immediately tried accessing the FTP site with IE 6 and I sucessfully downloaded the file, hence I don't believe that the site was having a problem.

I also had the same problem about 10 days ago.

During login procedure I put in 'Domain Name', User Name', 'Password'. Then I press Quickconnect and I get a message "Critical Error" :Could Not Connect To Server". I have updated to the latest version, something like 7.3.0 or whatever. Thanks.

Hi, FZ version 3.27.0.1 I enter a custom command "site tracks pri=300 sec=30" to overwrite the z/OS default size allocation but the site tracks pri=300 sec=30 is not taken. The Z/OS file get allocate to the z/os default size of 15 tracks which is not enough to hold the PC file (11.7MB). once the z/os file get full then FZ start looping

From the log: Command: PASV Response: 227 Entering Passive Mode (x,x,x,50,21,72) Command: APPE INSTALL Response: 125 Appending to data set FJ09.INSTALL.CD.FILES.INSTALL Response: 451-System completion code and reason: B37-04 Response: 451-Data set is out of space. Response: 451 Transfer aborted due to file error. Error: File transfer failed after transferring 1024.0 KiB in 1 second Status: Starting upload of D:\FTP\R6501.ML005\MVS\FILE\INSTALL Status: Retrieving directory listing of "'FJ09.INSTALL.CD.FILES.'"... Command: PASV

I know the error 451-System completion code and reason: B37-04 is because the z/os file is full. my problem is "why FZ did not take the custom command?" Site tracks pri=300 sec=30 when I get the response of accepted.

From the log: Command: site tracks pri=300 sec=30 Response: 200 SITE command was accepted

I you need other details, let me know. Regards. ...jy

Hello, I tried to connect into ftp but I am unable to get connect. I tried to use another pc but I am getting same error. Connection Timed Out error

Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 7 of 50 allowed. Response: 220-Local time is now 22:04. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: AUTH TLS Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server

Could you please assist me what is issue and how could I resolve it. I also tried to use another internet connection but I am still getting same error message.

Please find the attached screenshots

And please suggest me what should I do?

Regards, Ranveer Satyam

After uploading the latest patch, I'm now version 3.1.6 I tried to FTP to startlogic (my server). I was told that the file transfer was successful, however, when I go to my Wordpress.org admin page and select plugins (the files I was transfering) they are not there.

I had a larger file transfer of 446 files. Is there something I'm doing wrong here?

{{{Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/fonts Response: 250 CWD command successful Command: PWD Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\fonts\Batavia_.TTF Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/fonts" is the current directory Status: Retrieving directory listing... Command: PASV Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/fonts Response: 227 Entering Passive Mode (66,96,134,43,212,197) Command: LIST Response: 250 CWD command successful Command: PWD Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/fonts" is the current directory Status: Retrieving directory listing... Response: 150 Opening ASCII mode data connection for file list Response: 226 Transfer complete Command: PASV Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,201,167) Command: STOR Alanden_.ttf Response: 227 Entering Passive Mode (66,96,134,43,142,212) Command: STOR Batavia_.TTF Response: 150 Opening BINARY mode data connection for Alanden_.ttf Response: 150 Opening BINARY mode data connection for Batavia_.TTF Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\fonts\Bragga.TTF Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,161,253) Command: STOR Bragga.TTF Response: 150 Opening BINARY mode data connection for Bragga.TTF Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\fonts\bsurp_.ttf Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,175,164) Command: STOR bsurp_.ttf Response: 150 Opening BINARY mode data connection for bsurp_.ttf Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\fonts\ELECHA.TTF Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,204,149) Command: STOR ELECHA.TTF Response: 150 Opening BINARY mode data connection for ELECHA.TTF Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\fonts\JOKEWOOD.TTF Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,153,233) Command: STOR JOKEWOOD.TTF Response: 150 Opening BINARY mode data connection for JOKEWOOD.TTF Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\fonts\LCD-BOLD.TTF Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,209,132) Command: STOR LCD-BOLD.TTF Response: 150 Opening BINARY mode data connection for LCD-BOLD.TTF Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\fonts\lucon.ttf Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,145,172) Command: STOR lucon.ttf Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\fonts\luggerbu.ttf Command: PASV Response: 150 Opening BINARY mode data connection for lucon.ttf Response: 227 Entering Passive Mode (66,96,134,43,166,36) Command: STOR luggerbu.ttf Response: 150 Opening BINARY mode data connection for luggerbu.ttf Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\fonts\php fonts.txt Command: TYPE A Response: 200 Type set to A Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,188,87) Command: STOR php fonts.txt Response: 150 Opening ASCII mode data connection for php fonts.txt Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\fonts\RASCAL.TTF Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,150,188) Command: STOR RASCAL.TTF Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\fonts\SCRAWL.TTF Command: TYPE I Response: 150 Opening BINARY mode data connection for RASCAL.TTF Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,191,252) Command: STOR SCRAWL.TTF Response: 150 Opening BINARY mode data connection for SCRAWL.TTF Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\fonts\WAVY.TTF Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,161,92) Command: STOR WAVY.TTF Response: 150 Opening BINARY mode data connection for WAVY.TTF Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\bluesky\bluesky.zip Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/bluesky Response: 550 /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/bluesky: No such file or directory Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg Response: 550 /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg: No such file or directory Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt Response: 250 CWD command successful Command: MKD cfg Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg" - Directory successfully created Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg Response: 250 CWD command successful Command: MKD bluesky Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/bluesky" - Directory successfully created Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/bluesky Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\bluesky\cryptographp.cfg.php Response: 250 CWD command successful Command: PWD Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/bluesky" is the current directory Status: Retrieving directory listing... Command: PASV Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/bluesky Response: 227 Entering Passive Mode (66,96,134,43,130,229) Command: LIST Response: 250 CWD command successful Command: PWD Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/bluesky" is the current directory Status: Retrieving directory listing... Response: 150 Opening ASCII mode data connection for file list Response: 226 Transfer complete Command: PASV Command: TYPE A Response: 227 Entering Passive Mode (66,96,134,43,221,218) Command: STOR bluesky.zip Response: 200 Type set to A Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,225,215) Command: STOR cryptographp.cfg.php Response: 150 Opening BINARY mode data connection for bluesky.zip Response: 150 Opening ASCII mode data connection for cryptographp.cfg.php Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\bluesky\example.png Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,204,16) Command: STOR example.png Response: 150 Opening BINARY mode data connection for example.png Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\bluesky\lisezmoi.txt Command: TYPE A Response: 200 Type set to A Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,238,71) Command: STOR lisezmoi.txt Response: 150 Opening ASCII mode data connection for lisezmoi.txt Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\bluesky\readme.txt Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,214,76) Command: STOR readme.txt Response: 150 Opening ASCII mode data connection for readme.txt Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\colornumber\colornumber.zip Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/colornumber Response: 550 /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/colornumber: No such file or directory Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg Response: 250 CWD command successful Command: MKD colornumber Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\colornumber\cryptographp.cfg.php Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/colornumber" - Directory successfully created Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/colornumber Response: 250 CWD command successful Command: PWD Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/colornumber" is the current directory Status: Retrieving directory listing... Command: TYPE I Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/colornumber Response: 200 Type set to I Command: PASV Response: 250 CWD command successful Command: PWD Response: 227 Entering Passive Mode (66,96,134,43,183,52) Command: LIST Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/colornumber" is the current directory Status: Retrieving directory listing... Response: 150 Opening ASCII mode data connection for file list Response: 226 Transfer complete Command: PASV Command: TYPE A Response: 227 Entering Passive Mode (66,96,134,43,170,197) Command: STOR colornumber.zip Response: 200 Type set to A Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,217,233) Command: STOR cryptographp.cfg.php Response: 150 Opening BINARY mode data connection for colornumber.zip Response: 150 Opening ASCII mode data connection for cryptographp.cfg.php Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\colornumber\example.png Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,202,237) Command: STOR example.png Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\colornumber\lisezmoi.txt Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,176,157) Command: STOR lisezmoi.txt Response: 150 Opening BINARY mode data connection for example.png Response: 150 Opening ASCII mode data connection for lisezmoi.txt Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\colornumber\readme.txt Command: TYPE A Response: 200 Type set to A Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,181,144) Command: STOR readme.txt Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\default\bluenoise.zip Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default Response: 550 /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default: No such file or directory Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg Response: 150 Opening ASCII mode data connection for readme.txt Response: 250 CWD command successful Command: MKD default Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default" - Directory successfully created Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\default\cryptographp.cfg.php Response: 250 CWD command successful Command: PWD Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default" is the current directory Status: Retrieving directory listing... Command: TYPE I Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default Response: 200 Type set to I Command: PASV Response: 250 CWD command successful Command: PWD Response: 227 Entering Passive Mode (66,96,134,43,232,33) Command: LIST Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default" is the current directory Status: Retrieving directory listing... Response: 150 Opening ASCII mode data connection for file list Response: 226 Transfer complete Command: PASV Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,172,217) Command: STOR bluenoise.zip Response: 227 Entering Passive Mode (66,96,134,43,158,4) Command: STOR cryptographp.cfg.php Response: 150 Opening ASCII mode data connection for cryptographp.cfg.php Response: 150 Opening BINARY mode data connection for bluenoise.zip Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\default\example.png Command: TYPE I Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\default\lisezmoi.txt Command: TYPE A Response: 200 Type set to I Command: PASV Response: 200 Type set to A Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,236,142) Command: STOR example.png Response: 227 Entering Passive Mode (66,96,134,43,199,5) Command: STOR lisezmoi.txt Response: 150 Opening BINARY mode data connection for example.png Response: 150 Opening ASCII mode data connection for lisezmoi.txt Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\default\readme.txt Command: PASV Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\frenchcancan\cryptographp.cfg.php Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/frenchcancan Response: 227 Entering Passive Mode (66,96,134,43,160,214) Command: STOR readme.txt Response: 550 /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/frenchcancan: No such file or directory Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg Response: 250 CWD command successful Command: MKD frenchcancan Response: 150 Opening ASCII mode data connection for readme.txt Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/frenchcancan" - Directory successfully created Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/frenchcancan Response: 250 CWD command successful Command: PWD Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/frenchcancan" is the current directory Status: Retrieving directory listing... Command: PASV Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\frenchcancan\example.png Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/frenchcancan Response: 227 Entering Passive Mode (66,96,134,43,192,215) Command: LIST Response: 250 CWD command successful Status: Retrieving directory listing... Response: 150 Opening ASCII mode data connection for file list Response: 226 Transfer complete Command: TYPE A Command: TYPE I Response: 200 Type set to A Command: PASV Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,216,72) Command: STOR cryptographp.cfg.php Response: 227 Entering Passive Mode (66,96,134,43,219,64) Command: STOR example.png Response: 150 Opening ASCII mode data connection for cryptographp.cfg.php Response: 150 Opening BINARY mode data connection for example.png Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\frenchcancan\frenchcancan.zip Command: TYPE I Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\frenchcancan\lisezmoi.txt Command: TYPE A Response: 200 Type set to I Command: PASV Response: 200 Type set to A Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,211,133) Command: STOR frenchcancan.zip Response: 227 Entering Passive Mode (66,96,134,43,226,57) Command: STOR lisezmoi.txt Response: 150 Opening BINARY mode data connection for frenchcancan.zip Response: 150 Opening ASCII mode data connection for lisezmoi.txt Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\frenchcancan\readme.txt Command: TYPE A Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\gray\cryptographp.cfg.php Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/gray Response: 200 Type set to A Command: PASV Response: 550 /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/gray: No such file or directory Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg Response: 227 Entering Passive Mode (66,96,134,43,203,121) Command: STOR readme.txt Response: 250 CWD command successful Command: MKD gray Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/gray" - Directory successfully created Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/gray Response: 150 Opening ASCII mode data connection for readme.txt Response: 250 CWD command successful Command: PWD Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/gray" is the current directory Status: Retrieving directory listing... Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,234,26) Command: LIST Response: 150 Opening ASCII mode data connection for file list Response: 226 Transfer complete Command: TYPE A Response: 200 Type set to A Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,171,25) Command: STOR cryptographp.cfg.php Response: 150 Opening ASCII mode data connection for cryptographp.cfg.php Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\gray\example.png Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,162,68) Command: STOR example.png Response: 150 Opening BINARY mode data connection for example.png Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\gray\gray.zip Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,147,202) Command: STOR gray.zip Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\gray\lisezmoi.txt Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/gray Response: 150 Opening BINARY mode data connection for gray.zip Response: 250 CWD command successful Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,179,110) Command: STOR lisezmoi.txt Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\gray\readme.txt Command: TYPE A Response: 200 Type set to A Command: PASV Response: 150 Opening ASCII mode data connection for lisezmoi.txt Response: 227 Entering Passive Mode (66,96,134,43,232,169) Command: STOR readme.txt Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\paradise\cryptographp.cfg.php Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/paradise Response: 150 Opening ASCII mode data connection for readme.txt Response: 550 /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/paradise: No such file or directory Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg Response: 250 CWD command successful Command: MKD paradise Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\paradise\example.png Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/paradise" - Directory successfully created Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/paradise Response: 250 CWD command successful Command: PWD Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/paradise" is the current directory Status: Retrieving directory listing... Command: TYPE I Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/paradise Response: 200 Type set to I Command: PASV Response: 250 CWD command successful Command: PWD Response: 227 Entering Passive Mode (66,96,134,43,129,21) Command: LIST Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/paradise" is the current directory Status: Retrieving directory listing... Response: 150 Opening ASCII mode data connection for file list Response: 226 Transfer complete Command: TYPE A Command: TYPE I Response: 200 Type set to A Command: PASV Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,207,12) Command: STOR cryptographp.cfg.php Response: 227 Entering Passive Mode (66,96,134,43,130,156) Command: STOR example.png Response: 150 Opening ASCII mode data connection for cryptographp.cfg.php Response: 150 Opening BINARY mode data connection for example.png Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\paradise\lisezmoi.txt Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,231,175) Command: STOR lisezmoi.txt Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\paradise\paradise.zip Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,234,128) Command: STOR paradise.zip Response: 150 Opening ASCII mode data connection for lisezmoi.txt Response: 150 Opening BINARY mode data connection for paradise.zip Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\paradise\readme.txt Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,149,75) Command: STOR readme.txt Response: 150 Opening ASCII mode data connection for readme.txt Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\pencil\cryptographp.cfg.php Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/pencil Response: 550 /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/pencil: No such file or directory Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg Response: 250 CWD command successful Command: MKD pencil Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/pencil" - Directory successfully created Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/pencil Response: 250 CWD command successful Command: PWD Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/pencil" is the current directory Status: Retrieving directory listing... Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,203,251) Command: LIST Response: 150 Opening ASCII mode data connection for file list Response: 226 Transfer complete Command: TYPE A Response: 200 Type set to A Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,179,254) Command: STOR cryptographp.cfg.php Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\pencil\example.png Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/pencil Response: 250 CWD command successful Command: PASV Response: 150 Opening ASCII mode data connection for cryptographp.cfg.php Response: 227 Entering Passive Mode (66,96,134,43,207,8) Command: STOR example.png Response: 150 Opening BINARY mode data connection for example.png Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\pencil\lisezmoi.txt Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,147,52) Command: STOR lisezmoi.txt Response: 150 Opening ASCII mode data connection for lisezmoi.txt Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\pencil\pencil.zip Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,197,149) Command: STOR pencil.zip Response: 150 Opening BINARY mode data connection for pencil.zip Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\pencil\readme.txt Command: TYPE A Response: 200 Type set to A Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,159,192) Command: STOR readme.txt Response: 150 Opening ASCII mode data connection for readme.txt Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\xcolor\cryptographp.cfg.php Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/xcolor Response: 550 /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/xcolor: No such file or directory Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg Response: 250 CWD command successful Command: MKD xcolor Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\xcolor\example.png Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/xcolor" - Directory successfully created Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/xcolor Response: 250 CWD command successful Command: PWD Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/xcolor" is the current directory Status: Retrieving directory listing... Command: TYPE I Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/xcolor Response: 200 Type set to I Command: PASV Response: 250 CWD command successful Command: PWD Response: 227 Entering Passive Mode (66,96,134,43,228,101) Command: LIST Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/xcolor" is the current directory Status: Retrieving directory listing... Response: 150 Opening ASCII mode data connection for file list Response: 226 Transfer complete Command: TYPE A Command: PASV Response: 200 Type set to A Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,136,7) Command: STOR example.png Response: 227 Entering Passive Mode (66,96,134,43,164,3) Command: STOR cryptographp.cfg.php Response: 150 Opening BINARY mode data connection for example.png Response: 150 Opening ASCII mode data connection for cryptographp.cfg.php Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\xcolor\lisezmoi.txt Command: TYPE A Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\xcolor\readme.txt Command: PASV Response: 200 Type set to A Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,165,159) Command: STOR readme.txt Response: 227 Entering Passive Mode (66,96,134,43,154,230) Command: STOR lisezmoi.txt Response: 150 Opening ASCII mode data connection for readme.txt Response: 150 Opening ASCII mode data connection for lisezmoi.txt Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\xcolor\xcolor.zip Command: TYPE I Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\bluesky\fonds\sky.png Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/bluesky/fonds Response: 200 Type set to I Command: PASV Response: 550 /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/bluesky/fonds: No such file or directory Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/bluesky Response: 227 Entering Passive Mode (66,96,134,43,203,144) Command: STOR xcolor.zip Response: 250 CWD command successful Command: MKD fonds Response: 150 Opening BINARY mode data connection for xcolor.zip Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/bluesky/fonds" - Directory successfully created Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/bluesky/fonds Response: 250 CWD command successful Command: PWD Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/bluesky/fonds" is the current directory Status: Retrieving directory listing... Command: TYPE I Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\bluesky\fonds\Thumbs.db Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/bluesky/fonds Response: 200 Type set to I Command: PASV Response: 250 CWD command successful Status: Retrieving directory listing... Response: 227 Entering Passive Mode (66,96,134,43,132,33) Command: LIST Response: 150 Opening ASCII mode data connection for file list Response: 226 Transfer complete Command: PASV Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,228,11) Command: STOR sky.png Response: 227 Entering Passive Mode (66,96,134,43,213,239) Command: STOR Thumbs.db Response: 150 Opening BINARY mode data connection for sky.png Response: 150 Opening BINARY mode data connection for Thumbs.db Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\default\blackwhite\blackwhite.zip Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default/blackwhite Response: 550 /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default/blackwhite: No such file or directory Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default Response: 250 CWD command successful Command: MKD blackwhite Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default/blackwhite" - Directory successfully created Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default/blackwhite Response: 250 CWD command successful Command: PWD Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default/blackwhite" is the current directory Status: Retrieving directory listing... Command: PASV Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\default\blackwhite\cryptographp.cfg.php Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default/blackwhite Response: 227 Entering Passive Mode (66,96,134,43,145,208) Command: LIST Response: 250 CWD command successful Status: Retrieving directory listing... Response: 150 Opening ASCII mode data connection for file list Response: 226 Transfer complete Command: PASV Command: TYPE A Response: 227 Entering Passive Mode (66,96,134,43,128,240) Command: STOR blackwhite.zip Response: 200 Type set to A Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,133,231) Command: STOR cryptographp.cfg.php Response: 150 Opening BINARY mode data connection for blackwhite.zip Response: 150 Opening ASCII mode data connection for cryptographp.cfg.php Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\default\blackwhite\example.png Command: PASV Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\default\blackwhite\lisezmoi.txt Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,147,158) Command: STOR example.png Response: 227 Entering Passive Mode (66,96,134,43,153,83) Command: STOR lisezmoi.txt Response: 150 Opening BINARY mode data connection for example.png Response: 150 Opening ASCII mode data connection for lisezmoi.txt Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\default\blackwhite\readme.txt Command: TYPE A Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\default\classic\classic.zip Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default/classic Response: 200 Type set to A Command: PASV Response: 550 /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default/classic: No such file or directory Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default Response: 227 Entering Passive Mode (66,96,134,43,177,91) Command: STOR readme.txt Response: 250 CWD command successful Command: MKD classic Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default/classic" - Directory successfully created Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default/classic Response: 150 Opening ASCII mode data connection for readme.txt Response: 250 CWD command successful Command: PWD Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default/classic" is the current directory Status: Retrieving directory listing... Command: TYPE I Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\default\classic\cryptographp.cfg.php Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default/classic Response: 200 Type set to I Command: PASV Response: 250 CWD command successful Status: Retrieving directory listing... Response: 227 Entering Passive Mode (66,96,134,43,188,232) Command: LIST Response: 150 Opening ASCII mode data connection for file list Response: 226 Transfer complete Command: PASV Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,145,15) Command: STOR classic.zip Response: 227 Entering Passive Mode (66,96,134,43,156,76) Command: STOR cryptographp.cfg.php Response: 150 Opening BINARY mode data connection for classic.zip Response: 150 Opening ASCII mode data connection for cryptographp.cfg.php Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\default\classic\example.png Command: PASV Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\default\classic\lisezmoi.txt Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,198,158) Command: STOR example.png Response: 227 Entering Passive Mode (66,96,134,43,168,107) Command: STOR lisezmoi.txt Response: 150 Opening BINARY mode data connection for example.png Response: 150 Opening ASCII mode data connection for lisezmoi.txt Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\default\classic\readme.txt Command: TYPE A Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\default\psychedelic\cryptographp.cfg.php Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default/psychedelic Response: 200 Type set to A Command: PASV Response: 550 /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default/psychedelic: No such file or directory Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default Response: 227 Entering Passive Mode (66,96,134,43,203,243) Command: STOR readme.txt Response: 250 CWD command successful Command: MKD psychedelic Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default/psychedelic" - Directory successfully created Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default/psychedelic Response: 150 Opening ASCII mode data connection for readme.txt Response: 250 CWD command successful Command: PWD Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default/psychedelic" is the current directory Status: Retrieving directory listing... Command: TYPE I Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\default\psychedelic\example.png Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default/psychedelic Response: 200 Type set to I Command: PASV Response: 250 CWD command successful Status: Retrieving directory listing... Response: 227 Entering Passive Mode (66,96,134,43,212,195) Command: LIST Response: 150 Opening ASCII mode data connection for file list Response: 226 Transfer complete Command: TYPE A Command: TYPE I Response: 200 Type set to I Command: PASV Response: 200 Type set to A Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,129,219) Command: STOR example.png Response: 227 Entering Passive Mode (66,96,134,43,201,64) Command: STOR cryptographp.cfg.php Response: 150 Opening BINARY mode data connection for example.png Response: 150 Opening ASCII mode data connection for cryptographp.cfg.php Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\default\psychedelic\lisezmoi.txt Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,223,118) Command: STOR lisezmoi.txt Response: 150 Opening ASCII mode data connection for lisezmoi.txt Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\default\psychedelic\psychedelic.zip Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,150,134) Command: STOR psychedelic.zip Response: 150 Opening BINARY mode data connection for psychedelic.zip Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\default\psychedelic\readme.txt Command: TYPE A Response: 200 Type set to A Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,156,64) Command: STOR readme.txt Response: 150 Opening ASCII mode data connection for readme.txt Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\default\small\cryptographp.cfg.php Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default/small Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\default\small\example.png Response: 550 /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default/small: No such file or directory Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default Response: 250 CWD command successful Command: MKD small Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default/small" - Directory successfully created Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default/small Response: 250 CWD command successful Command: PWD Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default/small" is the current directory Status: Retrieving directory listing... Command: TYPE I Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default/small Response: 200 Type set to I Command: PASV Response: 250 CWD command successful Command: PWD Response: 227 Entering Passive Mode (66,96,134,43,155,117) Command: LIST Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/default/small" is the current directory Status: Retrieving directory listing... Response: 150 Opening ASCII mode data connection for file list Response: 226 Transfer complete Command: TYPE A Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,197,12) Command: STOR example.png Response: 200 Type set to A Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,183,30) Command: STOR cryptographp.cfg.php Response: 150 Opening BINARY mode data connection for example.png Response: 150 Opening ASCII mode data connection for cryptographp.cfg.php Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\default\small\lisezmoi.txt Command: TYPE A Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\default\small\readme.txt Command: PASV Response: 200 Type set to A Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,228,128) Command: STOR lisezmoi.txt Response: 227 Entering Passive Mode (66,96,134,43,164,54) Command: STOR readme.txt Response: 150 Opening ASCII mode data connection for readme.txt Response: 150 Opening ASCII mode data connection for lisezmoi.txt Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\default\small\small.zip Command: TYPE I Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\paradise\fonds\fond1.jpg Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/paradise/fonds Response: 200 Type set to I Command: PASV Response: 550 /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/paradise/fonds: No such file or directory Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/paradise Response: 227 Entering Passive Mode (66,96,134,43,181,211) Command: STOR small.zip Response: 250 CWD command successful Command: MKD fonds Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/paradise/fonds" - Directory successfully created Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/paradise/fonds Response: 150 Opening BINARY mode data connection for small.zip Response: 250 CWD command successful Command: PWD Response: 257 "/blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/paradise/fonds" is the current directory Status: Retrieving directory listing... Command: TYPE I Response: 226 Transfer complete Status: File transfer successful Response: 200 Type set to I Command: PASV Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\paradise\fonds\fond10.jpg Command: CWD /blog/wordpress/wp-content/plugins/plugins/mycaptcha/php/crypt/cfg/paradise/fonds Response: 227 Entering Passive Mode (66,96,134,43,176,195) Command: LIST Response: 250 CWD command successful Status: Retrieving directory listing... Response: 150 Opening ASCII mode data connection for file list Response: 226 Transfer complete Command: PASV Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,222,152) Command: STOR fond1.jpg Response: 227 Entering Passive Mode (66,96,134,43,232,99) Command: STOR fond10.jpg Response: 150 Opening BINARY mode data connection for fond1.jpg Response: 150 Opening BINARY mode data connection for fond10.jpg Response: 226 Transfer complete Status: File transfer successful Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\paradise\fonds\fond2.jpg Command: PASV Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\paradise\fonds\fond3.jpg Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,143,115) Command: STOR fond2.jpg Response: 227 Entering Passive Mode (66,96,134,43,153,167) Command: STOR fond3.jpg Response: 150 Opening BINARY mode data connection for fond2.jpg Response: 150 Opening BINARY mode data connection for fond3.jpg Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\paradise\fonds\fond4.jpg Command: PASV Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\paradise\fonds\fond5.jpg Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,224,51) Command: STOR fond4.jpg Response: 227 Entering Passive Mode (66,96,134,43,172,161) Command: STOR fond5.jpg Response: 150 Opening BINARY mode data connection for fond4.jpg Response: 150 Opening BINARY mode data connection for fond5.jpg Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\paradise\fonds\fond6.jpg Command: PASV Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\paradise\fonds\fond7.jpg Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,145,108) Command: STOR fond6.jpg Response: 227 Entering Passive Mode (66,96,134,43,179,23) Command: STOR fond7.jpg Response: 150 Opening BINARY mode data connection for fond6.jpg Response: 150 Opening BINARY mode data connection for fond7.jpg Response: 226 Transfer complete Status: File transfer successful Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\paradise\fonds\fond8.jpg Command: PASV Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\paradise\fonds\fond9.jpg Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,208,37) Command: STOR fond8.jpg Response: 227 Entering Passive Mode (66,96,134,43,222,206) Command: STOR fond9.jpg Response: 150 Opening BINARY mode data connection for fond8.jpg Response: 150 Opening BINARY mode data connection for fond9.jpg Response: 226 Transfer complete Status: File transfer successful Response: 226 Transfer complete Status: File transfer successful Status: Starting upload of C:\xampp\htdocs\wordpress\wp-content\plugins\mycaptcha\php\crypt\cfg\paradise\fonds\Thumbs.db Command: PASV Response: 227 Entering Passive Mode (66,96,134,43,187,187) Command: STOR Thumbs.db Response: 150 Opening BINARY mode data connection for Thumbs.db Response: 226 Transfer complete Status: File transfer successful Status: Retrieving directory listing... Command: CWD /blog/wordpress/wp-content Response: 250 CWD command successful Command: PWD Response: 257 "/blog/wordpress/wp-content" is the current directory Status: Directory listing successful Status: Disconnected from server Status: Disconnected from server

}}}

I have a FileZilla server (version 0.9.34) running on a Windows Server 2003 server (Web Edition, SP2)

"Normal FTP" is working normally (both from the inside and the outside), but for FTP over SSL/TLS, I have a problem.

I configured implicit FTP over SSL/TLS and am using active mode FTP.

When connected via VPN, things are working like a charm (when checking the firewall-logs, I see a connection on port 990 and 989, as expected). When connecting from an external IP-address, I also see a connection on port 990 and 989, but I get the following error: 150 Opening data channel for directory list. 425 Can't open data connection. As far as I can see, the data-connection is established (connection on port 989 in the firewall logs), but no data gets through. The firewall is a Cisco ASA 5505 and there are no denies in the logging when connecting to the FTP-server.

Somewhere, things are going wrong. I think the FTP server is to blame, but I would guess someone else would have the same issue... Windows logs aren't showing any (relevant) warnings or errors.

Can someone here shine a light on this issue?

First I connect to the server with the client and it is fast and no problems. I open the folders on server and on my pc so I can make a transfer. I doubleclick to transfer a file, and it reacts allright, but then it reports an error and for a slight second I can see the file in the list on the serverfolder and then it disappears. So instead of updating the file on the server the file is now missing!!!! I tried several times. This occured just after upgrading the client on automatic suggestion. Which I have done before without problems. Now this is extra annoying as it is the last thing I wanted to do before going on a travel tomorrow morning. And now instead of having an updated website I have a website with 2 missing files. Here is a copy of the report:

Status: Resolving address of s219191705.onlinehome.fr Status: Connecting to 82.165.174.120:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Connected Status: Retrieving directory listing... Status: Calculating timezone offset of server... Status: Timezone offsets: Server: 3600 seconds. Local: 3600 seconds. Difference: 0 seconds. Status: Directory listing of "/u46581113" successful Status: Resolving address of s219191705.onlinehome.fr Status: Connecting to 82.165.174.120:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Connected Status: Starting upload of E:\Hallon\Hemsidor\Brocante Albinque\sieges.htm Command: CWD /u46581113 Response: 250 CWD command successful. Command: PWD Response: 257 "/u46581113" is current directory. Command: TYPE A Response: 200 Type set to A. Command: PASV Response: 227 Entering Passive Mode (82,165,174,120,202,118). Command: STOR sieges.htm Response: 150 Opening ASCII mode data connection. Response: 550 The supplied message is incomplete. The signature was not verified. Error: File transfer failed Status: Starting upload of E:\Hallon\Hemsidor\Brocante Albinque\sieges.htm Status: Retrieving directory listing of "/u46581113"... Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (82,165,174,120,202,122). Command: LIST Response: 150 Opening BINARY mode data connection. Response: 226 Transfer complete. Command: TYPE A Response: 200 Type set to A. Command: PASV Response: 227 Entering Passive Mode (82,165,174,120,202,123). Command: STOR sieges.htm Response: 150 Opening ASCII mode data connection. Response: 550 The supplied message is incomplete. The signature was not verified. Error: File transfer failed Status: Starting upload of E:\Hallon\Hemsidor\Brocante Albinque\sieges.htm Status: Retrieving directory listing of "/u46581113"... Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (82,165,174,120,202,133). Command: LIST Response: 150 Opening BINARY mode data connection. Response: 226 Transfer complete. Command: TYPE A Response: 200 Type set to A. Command: PASV Response: 227 Entering Passive Mode (82,165,174,120,202,135). Command: STOR sieges.htm Response: 150 Opening ASCII mode data connection. Response: 550 The supplied message is incomplete. The signature was not verified. Error: File transfer failed Status: Retrieving directory listing of "/u46581113"... Status: Directory listing of "/u46581113" successful

Status: Connecting to apollo ... Status: Connected with apollo, negotiating SSL connection... Response: 220---------- Welcome to Pure-FTPd [TLS]

Response: 220-You are user number 2 of 10 allowed. Response: 220-Local time is now 15:29. Server port: 21. Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: AUTH TLS Response: 234 AUTH TLS OK. Status: SSL connection established. Waiting for welcome message... Command: PBSZ 0 Response: 200 PBSZ=0 Command: PROT P Response: 534 Fallback to [C] Command: USER horia Response: 331 User horia OK. Password required Command: PASS Response: 230-User horia has group access to: cvs

video audio dialout

Response: 230- uucp users Response: 230-This server supports FXP transfers Response: 230 OK. Current restricted directory is / Status: Connected Status: Retrieving directory listing... Command: CWD /store/ Response: 250 OK. Current directory is /store Command: PWD Response: 257 "/store" is your current location Command: PASV Response: 227 Entering Passive Mode (192,168,254,132,167,79) Command: TYPE A Response: 200 TYPE is now ASCII Command: LIST Response: 150 Accepted data connection Error: Could not retrieve directory listing Response: 226-Options: -a -l Response: 226 4 matches total Command: TYPE A Response: 200 TYPE is now ASCII

Create a binary file with contents: ff 00 00 00 Send it over FTP in passive mode, the connection hangs un-closed, thus server locks the file until timeout reaches, then Filezilla Client repeats an attempt to send the file, obviously failing as the file is locked on the server.

This is not the only file that makes filezilla hang a connection. A lot of UTF-16 files causes the same problem. Maybe all, don't know.

According to Wireshark, FTP-Data message of 4-bytes length is never followed by a FIN message, neither it is FIN itself.

Configuration: OS: Windows 7 SP1 7601, 32bit Filezilla: 3.5.3, build 2012-01-08 Server: Gene6 FTP Server 3.10.0 build 2

FTP site (IP address: 96.0.108.189) is accessible through window's utility (cmd prompt) but it is partially accessible through FileZilla. After putting username passwords, filezilla does not proceed further. Interestingly we have another ISP line on that both command prompt utility and filezilla utility work fine. Can you please guide why only filezilla utility is not working with particular ISP. Thank You

My acces to my website is denied with the following notifications:

Status: Adres bepalen van ftp.stolkerenergy.com Status: Verbinden met [2001:678:76c:3760::66]:21... Status: Verbinding gemaakt, welkomstbericht afwachten... Status: TLS initialiseren... Fout: GnuTLS-fout -8: A packet with illegal or unsupported version was received. Status: Verbindingspoging mislukt met "ECONNABORTED - Verbinding verbroken". Fout: Kan niet verbinden met server Status: Wachten om opnieuw te proberen.... Status: Adres bepalen van ftp.stolkerenergy.com Status: Verbinden met [2001:678:76c:3760::66]:21... Status: Verbinding gemaakt, welkomstbericht afwachten... Antwoord: 220 ProFTPD Server ready. Opdracht: AUTH TLS Antwoord: 234 Proceed with negotiation Status: TLS initialiseren... Fout: GnuTLS-fout -8: A packet with illegal or unsupported version was received. Status: Verbindingspoging mislukt met "ECONNABORTED - Verbinding verbroken". Fout: Kan niet verbinden met server

Just right of the "open site manager" button, the quick scroll menu displaying the list of the FTP sites does not work as it used to.

Up to version 3.1.2 if you had more than one screen long of FTP sites, the list would scroll automatically when you would reach the last item with your mouse. In the new 3.1.3.1 version, you need to click on the "down" arrow to make it scroll down.

Hello filezilla Support,

We are trying to connect our FTP server getting error

Status: Connecting to 212.227.141.236:21... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server

Can you please check and sortout the issue.

Thanks, Mahendra

The FTP server accepts the PORT command and produces the following output "200 Port command successful" although the server does not execute the command. Command output should not be produced in that case.

This is a Nessus finding.

Nessus description: Port: ftp (21/tcp) Issue name: FTP Privileged Port Bounce Scan

Synopsis: The remote FTP server is vulnerable to a FTP server bounce attack.

Description: It is possible to force the remote FTP server to connect to third parties using the PORT command. The problem allows intruders to use your network resources to scan other hosts, making them think the attack comes from your network.

Solution: See the CERT advisory in the references for solutions and workarounds.

Plugin Output: The following command, telling the server to connect to 169.254.176.115 on port 10794: PORT 169,254,176,115,42,42 produced the following output: 200 Port command successful

Nessus Plugin ID: 10081 VulnDB ID: 215

I would like see an option to have two remote connections to transfer between. Is this possible?

FTP session will not complete successfully. Log reports session timeout.

Version 3.1.6

Upgraded FileZilla Client to 3.10.3, starting receiving the following error:

Initializing TLS... Error: Received TLS alert from the server: Handshake failed (40) Error: Could not connect to server

FTP sites stopped connecting, but external sftp sites were connecting properly.

Uninstalled 3.10.3 and reinstalled 3.9. To remain secure, is there a fix/patch that will allow us to use 3.10? If not, is there another solution?

Program: FileZilla 3 beta 11 OS: Windows XP Professional SP2

Problem: FileZilla has a strange behavior when I try to upload my files to my 110mb.com FTP account.

Let's reproduce the problem step-by-step. I establish a connection to the FTP server and I try to upload a file.

Here is the log:

Status: Resolving IP-Address for kaixi.110mb.com Trace: ControlSocket.cpp(948): CRealControlSocket::ContinueConnect(013475B8) m_pEngine=01089CD0 caller=01330488 Status: Connecting to 195.242.99.215:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 41 of 50 allowed. Response: 220-Local time is now 15:50. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 60 seconds of inactivity. Command: USER kaixi Trace: CFtpControlSocket::OnReceive() Response: 331 User kaixi OK. Password required Command: PASS Trace: CFtpControlSocket::OnReceive() Response: 230-User kaixi has group access to: vhosts Response: 230-OK. Current restricted directory is / Response: 230 289 Kbytes used (0%) - authorized: 2048000 Kb Status: Connected Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Retrieving directory listing... Trace: CFtpControlSocket::SendNextCommand(0) Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/" is your current location Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::SendNextCommand(0) Trace: CFtpControlSocket::ListSend(0) Trace: CFtpControlSocket::SendNextCommand(0) Trace: CFtpControlSocket::TransferSend(0) Command: TYPE I Trace: CFtpControlSocket::OnReceive() Response: 200 TYPE is now 8-bit binary Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::TransferSend(0) Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (195,242,99,215,237,57) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::TransferSend(0) Command: LIST -a Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Accepted data connection Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::TransferSend(0) Trace: CTransferSocket::OnClose Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226-ASCII Response: 226-Options: -a -l Response: 226 11 matches total Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::SendNextCommand(0) Trace: CFtpControlSocket::ListSend(0) Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Resolving IP-Address for kaixi.110mb.com Trace: ControlSocket.cpp(948): CRealControlSocket::ContinueConnect(01347308) m_pEngine=01320268 caller=01352F30 Status: Connecting to 195.242.99.215:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 421 Too many connections (1) from this IP Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Error: Could not connect to server Status: Waiting to retry... Status: Resolving IP-Address for kaixi.110mb.com Trace: ControlSocket.cpp(948): CRealControlSocket::ContinueConnect(01347578) m_pEngine=01320268 caller=01352F30 Status: Connecting to 195.242.99.215:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 421 Too many connections (1) from this IP Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Error: Could not connect to server Status: Waiting to retry... Status: Resolving IP-Address for kaixi.110mb.com Trace: ControlSocket.cpp(948): CRealControlSocket::ContinueConnect(01347308) m_pEngine=01320268 caller=01352F30 Status: Connecting to 195.242.99.215:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 421 Too many connections (1) from this IP Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Error: Could not connect to server Status: Resolving IP-Address for kaixi.110mb.com Trace: ControlSocket.cpp(948): CRealControlSocket::ContinueConnect(01347308) m_pEngine=01320268 caller=01352F30 Status: Connecting to 195.242.99.215:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 421 Too many connections (1) from this IP Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Error: Could not connect to server Status: Waiting to retry... Status: Resolving IP-Address for kaixi.110mb.com Trace: ControlSocket.cpp(948): CRealControlSocket::ContinueConnect(0134FD80) m_pEngine=01320268 caller=01352F30 Status: Connecting to 195.242.99.215:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 421 Too many connections (1) from this IP Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Error: Could not connect to server Status: Waiting to retry...

There is absolutely no way to upload files. I've tried everything: only one file upload every time, I've set the simultaneous uploads to 1... After my unsuccessful tries I finally decide to give up. OK, I disconnect from the server.

The strange part comes...

Now look at the log:

Status: Disconnected from server Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Status: Resolving IP-Address for kaixi.110mb.com Trace: ControlSocket.cpp(948): CRealControlSocket::ContinueConnect(013479F8) m_pEngine=01320268 caller=01330488 Status: Connecting to 195.242.99.215:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 40 of 50 allowed. Response: 220-Local time is now 15:59. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 60 seconds of inactivity. Command: USER kaixi Trace: CFtpControlSocket::OnReceive() Response: 331 User kaixi OK. Password required Command: PASS Trace: CFtpControlSocket::OnReceive() Response: 230-User kaixi has group access to: vhosts Response: 230-OK. Current restricted directory is / Response: 230 289 Kbytes used (0%) - authorized: 2048000 Kb Status: Connected Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::FileTransfer() Status: Starting upload of C:\Documents and Settings\Ningsu\Escritorio\Web\index.html Trace: CFtpControlSocket::SendNextCommand(0) Command: CWD / Trace: CFtpControlSocket::OnReceive() Response: 250 OK. Current directory is / Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/" is your current location Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::SendNextCommand(0) Trace: FileTransferSend() Trace: CFtpControlSocket::SendNextCommand(0) Trace: CFtpControlSocket::TransferSend(0) Command: TYPE A Trace: CFtpControlSocket::OnReceive() Response: 200 TYPE is now ASCII Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::TransferSend(0) Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (195,242,99,215,195,99) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::TransferSend(0) Command: STOR index.html Trace: CTransferSocket::OnConnect Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 150 Accepted data connection Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::TransferSend(0) Trace: CFtpControlSocket::OnReceive() Response: 226-292 Kbytes used (0%) - authorized: 2048000 Kb Response: 226-File successfully transferred Response: 226 0.146 seconds (measured here), 22.17 Kbytes per second Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::SendNextCommand(0) Trace: FileTransferSend() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: File transfer successful Status: Disconnected from server Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66)

Now that I was supposed to be disconnected the file starts to upload to the server. It's amazing!!

Can you please please tell me what's happening here? Many users from 110mb who use FileZilla 3 are experiencing this problem. See this forum post:

​http://www.110mb.com/forum/empty-t17936.0.html

In my opinion, I think this is a bug of Filezilla 3 beacause everything is fine with Filezilla 2.

Take a look to this, please. Could you send me a reply to kaixiluo at gmail dot com? Thanks a lot.

Yours sincerely,

Kaixi

Hello does filezilla has a synchronize feauture? from local to ftp server or from ftp server to local.

hope you could help me thanks a lot.

Using FileZilla 2.1.4b, I can FTP files to Xbox normallyat a high speed, like several Mbps. Upgrading to FileZilla 2.1.5 and higher (I tried the latest 2.1.8b) the FTP uploads slow down to around 20-70K/sec. FTP downloads to PC are fast and it is just the uploads that are slow in later versions.

I am using EvolutionX and XBMP 2.4 as FTP server.

I am trying to upload some files (100 Mb or more). I was using last version of Filezilla FTP client (3.1.3). The file is uploading till it is locked (1.6 or 1.7 MB). From this point, my internet connection is locked and I can't navigate web or ftp, till I restart my system. I am using now Filezilla 3.0.9.3 and all is OK. Thanks

Upgraded and now get the error "Failed to retrieve directory listing" from MediaTemple servers. Most others I get the same error but I have one that will work.

Something has changed with the update I did today. Another machine that I did NOT upgrade FZ on is working fine.

Status: Resolving address of www.killeringenuity.com Status: Connecting to 70.32.68.105:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (70,32,68,105,234,27) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

Hi!

I'm desperate. I have 2 macs and in neither of them I can connect via ftp with tls. I can only connect via plain ftp (insecure). I think the problem is that when making the connection it does not ask me for the certificate. Other colleagues can connect with tls, and they DO ask to accept the certificate. Why don't you ask me for the certificate? I have tried everything, I have even formatted the computer. Have you had a similar case?

Thanks.

Estado: Conectando a 51.255.211.124:21... Estado: Conexión establecida, esperando el mensaje de bienvenida... Respuesta: 220 ProFTPD Server (ProFTPD) [51.255.211.124] Comando: AUTH TLS Respuesta: 502 AUTH TLS successful Comando: AUTH SSL Error: No se pudo leer desde el socket: ECONNRESET - Conexión reiniciada por el par Error: No se pudo conectar al servidor

Please implement it in future. As usual, with 'support/require/do not check' options. And maybe an option to restrict each user/group to specific certificate.

The LOG:

Status: Disconnected from server Status: Resolving address of test.test.com Status: Connecting to xxx.xxx.xxx.xxx:21... Status: Connection established, waiting for welcome message... Response: 220 Welcome on the test Command: AUTH TLS Response: 234 Proceed with negotiation. Status: Initializing TLS... Status: Verifying certificate... Command: USER testuser Status: TLS/SSL connection established. Response: 331 Please specify the password. Command: PASS Response: 230 Login successful. Command: PBSZ 0 Response: 200 PBSZ set to 0. Command: PROT P Response: 200 PROT now Private. Status: Connected Status: Retrieving directory listing... Command: CWD / Response: 250 Directory successfully changed. Command: PWD Response: 257 "/" Command: TYPE I Response: 200 Switching to Binary mode. Command: PASV Response: 227 Entering Passive Mode (xxx,xxx,xxx,xxx,xxx,xxx) Command: LIST Response: 150 Here comes the directory listing.

Error: Could not read from transfer socket: ECONNABORTED - Connection aborted Response: 226 Directory send OK. Error: Failed to retrieve directory listing

Server: Debian with VSFtp My PC: WinXP Pro, FileZilla_3.1.0-rc1_win32-setup.exe

With FTP-Mode it works on this server. With FileZilla_3.0.11.1_win32-setup.exe it works to.

Filezilla 3.1.0.1 and 3.1.1.1 (Windows XP) fails with LIST command using FTPES - FTP over explicit TLS/SSL, Logon Type normal, Passiv Mode

Directory creation succeeds

lftp and FireFTP (Firefox 3.0 AddOn) work fine on same Server

Trace: GnuTLS error -9: A TLS packet with unexpected length was received.

see attached log file (Debug Level 4)

FTPES behind NAT uses internal address

FileZilla 3.0.0-beta5.

When connecting per FTPES from WAN to a "misconfigured" FTP server behind a NAT that reports its internal address, the connection uses PASV(internal IP,PORT) even if under Settings -> Connection -> Passive mode the radio box is on "Use the server's external IP address instead".

Connection works with plain FTP over WAN (in this case FileZilla uses correctly the external address - the address of NAT box).

* END OF BUGREPORT.

The setup: 1) I am pretty sure, the NAT box is correctly configured (forwards TCP/21 and passive upper address range to internal "misconfigured" FTP server (Synology DS-106:FW426), which unfortunately is not further configurable)

2) Connection works using FTPES in LAN.

I have posted this post before, now posting it with debug logs as required.

Using FileZilla 3.0.0-beta5, connecting to Synology DS-106 (192.168.77.8), with FTP-SSL support. DSL router has port forwarding on external 21->internal 21 and passiv port range 55536-56559 to internal configured.

All runs fine in LAN (FTP and FTPES connections).

When connecting with FTPES from WAN to a "misconfigured" FTP server behind a NAT that reports its internal address, the connection uses PASV(internal IP,PORT) even if under Settings -> Connection -> Passive mode the radio box is on "Use the server's external IP address instead".

Connection works with plain FTP over WAN (in this case FileZilla uses correctly the external address - the address of NAT box), all goes unfortunately plain-text over the network this wan :(

Attached are 3 logs in ASCII (zipped as one file). Log1 - LAN FTPES, success Log2 - WAN FTPES, failure by LIST Log3 - WAN FTP, success

Hi!

FTPES no longer works with our server:

... Command: PASV Response: 227 Entering Passive Mode (83,149,114,132,19,138) Command: LIST Response: 150 Opening data connection Status: Server did not properly shut down TLS connection Error: Could not read from transfer socket: ECONNABORTED - Connection aborted Response: 226 Transfer complete Error: Failed to retrieve directory listing

Thanks! Atmapuri

This used to work on earlier versions, but now when I try and connect using FTPES the following happens:

Status: Resolving address of xxxxx.xx.xxx.net Status: Connecting to 10.x.x.x:21... Status: Connection established, waiting for welcome message... Response: 220-FTPD11 IBM FTP CS V1R8 at xxxxx.xx.xxx.net, 13:50:58 on 2008-10-20. Response: 220 Connection will close if idle for more than 5 minutes. Command: AUTH TLS Response: 234 Security environment established - ready for negotiation Status: Initializing TLS... Status: Verifying certificate... Command: USER xxxxxxx Status: TLS/SSL connection established. Response: 331 Send password please. Command: PASS * Response: 230 xxxxxx is logged on. Working directory is "xxxxxx.". Command: SYST Response: 215 MVS is the operating system of this server. FTP Server is running on z/OS. Command: FEAT Response: 211- Extensions supported Response: AUTH TLS Response: PBSZ Response: PROT Response: 211 End Command: PBSZ 0 Response: 200 Protection buffer size accepted Command: PROT P Response: 200 Data connection protection set to private Status: Connected Status: Retrieving directory listing... Command: CWD /xxx/xxxxxx/xxxxxxx/xxxx Response: 250 HFS directory /xxx/xxxxxx/xxxxxxx/xxxx is the current working directory Command: PWD Response: 257 "/xxx/xxxxxx/xxxxxxx/xxxx" is the HFS working directory. Command: TYPE I Response: 200 Representation type is Image Command: PASV Response: 227 Entering Passive Mode (10,x,x,x,4,245) Command: LIST Response: 125 List started OK Status: Server did not properly shut down TLS connection Error: Could not read from transfer socket: ECONNABORTED - Connection aborted Response: 250 List completed successfully. Error: Failed to retrieve directory listing

ftp protocol works correctly

but at connection with ftpEs returned this (in czech language):

Stav: Zjišťuji adresu ftp.xxx.cz Stav: Připojuji se k 193.86.238.33:21 Stav: Spojení navázáno, čekám na uvítací zprávu... Odpověď: 220 FTP Příkaz: AUTH TLS Odpověď: 234 AUTH TLS successful Stav: Inicializuji TLS... Stav: Ověřuji certifikát... Příkaz: USER xxx.cz Stav: TLS/SSL spojení navázáno. Odpověď: 331 Password required for xxx.cz Příkaz: PASS * Odpověď: 230 User xxx.cz logged in Příkaz: SYST Odpověď: 215 UNIX Type: L8 Příkaz: FEAT Odpověď: 211-Features: Odpověď: MDTM Odpověď: AUTH TLS Odpověď: PBSZ Odpověď: PROT Odpověď: REST STREAM Odpověď: SIZE Odpověď: 211 End Příkaz: PBSZ 0 Odpověď: 200 PBSZ 0 successful Příkaz: PROT P Odpověď: 200 Protection set to Private Stav: Připojen Stav: Přijímám výpis složky... Příkaz: PWD Odpověď: 257 "/" is the current directory Příkaz: TYPE I Odpověď: 200 Type set to I Příkaz: PASV Odpověď: 227 Entering Passive Mode (193,86,238,33,237,17). Příkaz: LIST Odpověď: 150 Opening ASCII mode data connection for file list Stav: Server správně neukončil spojení TLS Chyba: Could not read from transfer socket: ECONNABORTED - Connection aborted Odpověď: 226 Transfer complete Chyba: Nelze získat výpis složky

FTPES fails to retrieve directory - worked in 3.0.11.1

Log: 12:06:12 Status: Resolving address of alumweb.mit.edu 12:06:12 Status: Connecting to 18.92.1.96:21... 12:06:12 Status: Connection established, waiting for welcome message... 12:06:12 Trace: CFtpControlSocket::OnReceive() 12:06:12 Response: 220 18.92.1.96 FTP server ready 12:06:12 Trace: CFtpControlSocket::SendNextCommand() 12:06:12 Command: AUTH TLS 12:06:13 Trace: CFtpControlSocket::OnReceive() 12:06:13 Response: 234 AUTH TLS successful 12:06:13 Status: Initializing TLS... 12:06:13 Trace: CTlsSocket::Handshake() 12:06:13 Trace: CTlsSocket::Handshake() 12:06:13 Trace: CTlsSocket::Handshake() 12:06:14 Trace: CTlsSocket::Handshake() 12:06:14 Trace: Handshake successful 12:06:14 Trace: Cipher: AES-128-CBC, MAC: SHA1 12:06:14 Status: Verifying certificate... 12:06:14 Trace: CFtpControlSocket::SendNextCommand() 12:06:14 Command: USER capecod 12:06:14 Status: TLS/SSL connection established. 12:06:14 Trace: CFtpControlSocket::OnReceive() 12:06:14 Response: 331 Password required for capecod. 12:06:14 Trace: CFtpControlSocket::SendNextCommand() 12:06:14 Command: PASS * 12:06:14 Trace: CFtpControlSocket::OnReceive() 12:06:14 Response: 230 User * logged in. 12:06:14 Trace: CFtpControlSocket::SendNextCommand() 12:06:14 Command: SYST 12:06:14 Trace: CFtpControlSocket::OnReceive() 12:06:14 Response: 215 UNIX Type: L8 12:06:14 Trace: CFtpControlSocket::SendNextCommand() 12:06:14 Command: FEAT 12:06:14 Trace: CFtpControlSocket::OnReceive() 12:06:14 Response: 211-Features: 12:06:14 Response: MDTM 12:06:14 Response: REST STREAM 12:06:14 Response: SIZE 12:06:14 Response: AUTH TLS 12:06:14 Response: PBSZ 12:06:14 Response: PROT 12:06:14 Response: 211 End 12:06:14 Trace: CFtpControlSocket::SendNextCommand() 12:06:14 Command: PBSZ 0 12:06:14 Trace: CFtpControlSocket::OnReceive() 12:06:14 Response: 200 PBSZ 0 successful 12:06:14 Trace: CFtpControlSocket::SendNextCommand() 12:06:14 Command: PROT P 12:06:14 Trace: CFtpControlSocket::OnReceive() 12:06:14 Response: 200 Protection set to Private 12:06:14 Status: Connected 12:06:14 Trace: CFtpControlSocket::ResetOperation(0) 12:06:14 Trace: CControlSocket::ResetOperation(0) 12:06:14 Status: Retrieving directory listing... 12:06:14 Trace: CFtpControlSocket::SendNextCommand() 12:06:14 Trace: CFtpControlSocket::ChangeDirSend() 12:06:14 Command: PWD 12:06:14 Trace: CFtpControlSocket::OnReceive() 12:06:14 Response: 257 "/" is current directory. 12:06:14 Trace: CFtpControlSocket::ResetOperation(0) 12:06:14 Trace: CControlSocket::ResetOperation(0) 12:06:14 Trace: CFtpControlSocket::ParseSubcommandResult(0) 12:06:14 Trace: CFtpControlSocket::ListSubcommandResult() 12:06:14 Trace: CFtpControlSocket::SendNextCommand() 12:06:14 Trace: CFtpControlSocket::TransferSend() 12:06:14 Command: TYPE I 12:06:14 Trace: CFtpControlSocket::OnReceive() 12:06:14 Response: 200 Type set to I 12:06:14 Trace: CFtpControlSocket::TransferParseResponse() 12:06:14 Trace: CFtpControlSocket::SendNextCommand() 12:06:14 Trace: CFtpControlSocket::TransferSend() 12:06:14 Command: PASV 12:06:14 Trace: CFtpControlSocket::OnReceive() 12:06:14 Response: 227 Entering Passive Mode (18,92,1,96,143,55). 12:06:14 Trace: CFtpControlSocket::TransferParseResponse() 12:06:14 Trace: CFtpControlSocket::SendNextCommand() 12:06:14 Trace: CFtpControlSocket::TransferSend() 12:06:14 Command: LIST 12:06:14 Trace: CTransferSocket::OnConnect 12:06:14 Trace: CTlsSocket::Handshake() 12:06:14 Trace: CTlsSocket::Handshake() 12:06:14 Trace: CFtpControlSocket::OnReceive() 12:06:14 Response: 150 Opening ASCII mode data connection for file list 12:06:14 Trace: CFtpControlSocket::TransferParseResponse() 12:06:14 Trace: CFtpControlSocket::SendNextCommand() 12:06:14 Trace: CFtpControlSocket::TransferSend() 12:06:14 Trace: CTlsSocket::Handshake() 12:06:14 Trace: CTlsSocket::Handshake() 12:06:14 Trace: Handshake successful 12:06:14 Trace: Cipher: AES-128-CBC, MAC: SHA1 12:06:14 Trace: CTransferSocket::OnConnect 12:06:14 Trace: GnuTLS error -9: A TLS packet with unexpected length was received. 12:06:14 Status: Server did not properly shut down TLS connection 12:06:14 Error: Could not read from transfer socket: ECONNABORTED - Connection aborted 12:06:14 Trace: CTransferSocket::TransferEnd(3) 12:06:14 Trace: CFtpControlSocket::TransferEnd() 12:06:14 Trace: CFtpControlSocket::OnReceive() 12:06:14 Response: 226 Transfer complete. 12:06:14 Trace: CFtpControlSocket::TransferParseResponse() 12:06:14 Trace: CFtpControlSocket::ResetOperation(2) 12:06:14 Trace: CControlSocket::ResetOperation(2) 12:06:14 Trace: CFtpControlSocket::ParseSubcommandResult(2) 12:06:14 Trace: CFtpControlSocket::ListSubcommandResult() 12:06:14 Trace: CFtpControlSocket::ResetOperation(2) 12:06:14 Trace: CControlSocket::ResetOperation(2) 12:06:14 Error: Failed to retrieve directory listing

When using GnuTLS 2.12.7 FileZilla could successfully connect using FTPES, however after upgrading to GnuTLS 3 (and compiling FileZilla against it) when trying to connect I get the following error:

Status:	Resolving address of <redacted>
Status:	Connecting to <redacted>:21...
Status:	Connection established, waiting for welcome message...
Trace:	CFtpControlSocket::OnReceive()
Response:	220 (vsFTPd 2.3.4)
Trace:	CFtpControlSocket::SendNextCommand()
Command:	AUTH TLS
Trace:	CFtpControlSocket::OnReceive()
Response:	234 Proceed with negotiation.
Status:	Initializing TLS...
Trace:	CTlsSocket::Handshake()
Trace:	CTlsSocket::ContinueHandshake()
Trace:	CTlsSocket::ContinueHandshake()
Trace:	GnuTLS alert 40: Handshake failed
Error:	GnuTLS error -12: A TLS fatal alert has been received.
Trace:	CRealControlSocket::OnClose(103)
Trace:	CFtpControlSocket::ResetOperation(66)
Trace:	CControlSocket::ResetOperation(66)
Error:	Could not connect to server
Status:	Waiting to retry...
Status:	Resolving address of apiratelifeforme.com
Status:	Connecting to <redacted>:21...
Status:	Connection established, waiting for welcome message...
Trace:	CFtpControlSocket::OnReceive()
Response:	220 (vsFTPd 2.3.4)
Trace:	CFtpControlSocket::SendNextCommand()
Command:	AUTH TLS
Trace:	CFtpControlSocket::OnReceive()
Response:	234 Proceed with negotiation.
Status:	Initializing TLS...
Trace:	CTlsSocket::Handshake()
Trace:	CTlsSocket::ContinueHandshake()
Trace:	CTlsSocket::ContinueHandshake()
Trace:	GnuTLS alert 40: Handshake failed
Error:	GnuTLS error -12: A TLS fatal alert has been received.
Trace:	CRealControlSocket::OnClose(103)
Trace:	CFtpControlSocket::ResetOperation(66)
Trace:	CControlSocket::ResetOperation(66)
Error:	Could not connect to server

I can successfully connect with FileZilla from Windows and from Linux if I downgrade GnuTLS, so the server works just fine.

Hello Devs!

I cant connect any more over FTPES with the newest FileZilla Version (3.1.1.1) to my proftpd servers (testes on 2 different servers).

19:25:20	Status:	Resolving address of my.host.com
19:25:20	Status:	Connecting to 88.88.88.88:21...
19:25:20	Status:	Connection established, waiting for welcome message...
19:25:20	Response:	220 ProFTPD 1.3.0 Server (my.host.com) [88.88.88.88]
19:25:20	Command:	AUTH TLS
19:25:20	Response:	234 AUTH TLS successful
19:25:20	Status:	Initializing TLS...
19:25:20	Status:	Verifying certificate...
19:25:20	Command:	USER user01
19:25:20	Status:	TLS/SSL connection established.
19:25:20	Response:	331 Password required for user01.
19:25:20	Command:	PASS ******************
19:25:20	Response:	230 User user01 logged in.
19:25:20	Command:	PBSZ 0
19:25:20	Response:	200 PBSZ 0 successful
19:25:20	Command:	PROT P
19:25:20	Response:	200 Protection set to Private
19:25:20	Status:	Connected
19:25:20	Status:	Retrieving directory listing...
19:25:20	Command:	PWD
19:25:20	Response:	257 "/" is current directory.
19:25:20	Command:	TYPE I
19:25:20	Response:	200 Type set to I
19:25:20	Command:	PASV
19:25:20	Response:	227 Entering Passive Mode (88,88,88,88,255,244).
19:25:20	Command:	LIST
19:25:20	Response:	150 Opening ASCII mode data connection for file list
19:25:20	Status:	Server did not properly shut down TLS connection
19:25:20	Error:	Could not read from transfer socket: ECONNABORTED - Connection aborted
19:25:20	Response:	226 Transfer complete.
19:25:20	Error:	Failed to retrieve directory listing

I testest the same Server with a old FileZilla Portable Version (2.2.32) and it works properly.

All clients use PASV and the servers are configured with port-ranges thats are accepted on the servers incomming firewall.

Any Idea whats wrong?

Thomas

( 1 ) SUMMARY Using server type FTPES (FTP over explicit TLS/SSL), the server is z/OS, the client platform is Windows XP.

This problem occurs in v3.1.0 but IS NOT a problem in v3.0.11.1. After successfully connecting, you can't see any directory and you get the following error messages:

Error: Could not read from transfer socket: ECONNABORTED - Connection aborted Response: 250 List completed successfully. Error: Failed to retrieve directory listing

( 2 ) v3.1.0 SESSION LOG Here is the whole problem session (name, server, etc. made generic) under 3.1.0:

Status: Connecting to xxx.xx.xx.xxx:21... Status: Connection established, waiting for welcome message... Response: 220-FTPD1 IBM FTP CS V1R7 at aaaa.state.xx.us, 21:31:59 on 2008-07-23. Response: 220-* Response: 220-* Unauthorized Use of computing resources is punishable by * Response: 220-* xxxxxx criminal law xxxxxxxxx yyyyyyyyyyyyy zzzzzzzzzzzzzzzzzz * Response: 220-* Response: 220 Connection will close if idle for more than 5 minutes. Command: AUTH TLS Response: 234 Security environment established - ready for negotiation Status: Initializing TLS... Status: Verifying certificate... Command: USER xxxxxxx Status: TLS/SSL connection established. Response: 331 Send password please. Command: PASS Response: 230 xxxxxxx is logged on. Working directory is "XXXXXXX.". Command: SYST Response: 215 MVS is the operating system of this server. FTP Server is running on z/OS. Command: FEAT Response: 211- Extensions supported Response: AUTH TLS Response: PBSZ Response: PROT Response: 211 End Command: PBSZ 0 Response: 200 Protection buffer size accepted Command: PROT P Response: 200 Data connection protection set to private Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "'XXXXXXX.'" is working directory. Command: TYPE I Response: 200 Representation type is Image Command: PASV Response: 227 Entering Passive Mode (111,22,33,444,15,109) Command: LIST Response: 125 List started OK Error: Could not read from transfer socket: ECONNABORTED - Connection aborted Response: 250 List completed successfully. Error: Failed to retrieve directory listing

( 2 ) v3.0.11.1 SESSION LOG Here is the whole successful session (name, server, etc. made generic) under 3.0.11.1: Status: Connecting to xxx.xx.xx.xxx:21... Status: Connection established, waiting for welcome message... Response: 220-FTPD1 IBM FTP CS V1R7 at xxxx.state.xx.us, 21:37:16 on 2008-07-23. Response: 220-* Response: 220-* Unauthorized Use of computing resources is punishable by * Response: 220-* criminal law xxxxxxxxxxxxxxxx yyyyyyyyyyyy zzzzzzzzzzzzzzzzzzz * Response: 220-* Response: 220 Connection will close if idle for more than 5 minutes. Command: AUTH TLS Response: 234 Security environment established - ready for negotiation Status: Initializing TLS... Command: USER xxxxxxx Status: Verifying certificate... Status: TLS/SSL connection established. Response: 331 Send password please. Command: PASS Response: 230 xxxxxxx is logged on. Working directory is "XXXXXXX.". Command: SYST Response: 215 MVS is the operating system of this server. FTP Server is running on z/OS. Command: FEAT Response: 211- Extensions supported Response: AUTH TLS Response: PBSZ Response: PROT Response: 211 End Command: PBSZ 0 Response: 200 Protection buffer size accepted Command: PROT P Response: 200 Data connection protection set to private Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "'XXXXXXX.'" is working directory. Command: TYPE I Response: 200 Representation type is Image Command: PASV Response: 227 Entering Passive Mode (111,22,33,444,15,151) Command: LIST Response: 125 List started OK Response: 250 List completed successfully. Status: Directory listing successful

when connect with Netware 6.5 FTP Server in NOVELL: OES Netware 6.5

I get

11:44:19 Status: Selected port usually in use by a different protocol. 11:44:19 Status: Connecting to 10.192.7.139:22... 11:44:19 Status: Connection established, waiting for welcome message... 11:44:19 Trace: CFtpControlSocket::OnReceive() 11:44:19 Response: 220-Benvingut al servei FTP del Departament de Treball 11:44:19 Trace: CFtpControlSocket::OnReceive() 11:44:19 Response: 220 Service Ready for new User 11:44:19 Trace: CFtpControlSocket::SendNextCommand() 11:44:19 Command: AUTH TLS 11:44:19 Trace: CFtpControlSocket::OnReceive() 11:44:19 Response: 234 Enabling SSL 11:44:19 Status: Initializing TLS... 11:44:19 Trace: CTlsSocket::Handshake() 11:44:19 Trace: CTlsSocket::OnSend() 11:44:19 Trace: CTlsSocket::OnRead() 11:44:19 Trace: CTlsSocket::Handshake() 11:44:19 Trace: CTlsSocket::OnRead() 11:44:19 Trace: CTlsSocket::Handshake() 11:44:19 Trace: CTlsSocket::OnRead() 11:44:19 Trace: CTlsSocket::Handshake() 11:44:19 Trace: Handshake successful 11:44:19 Trace: Cipher: AES-128-CBC, MAC: SHA1 11:44:19 Status: Verifying certificate... 11:44:19 Trace: CFtpControlSocket::SendNextCommand() 11:44:19 Command: USER sftp 11:44:19 Status: TLS/SSL connection established. 11:44:40 Error: Connection timed out 11:44:40 Trace: CControlSocket::DoClose(2050) 11:44:40 Trace: CFtpControlSocket::ResetOperation(2114) 11:44:40 Trace: CControlSocket::ResetOperation(2114) 11:44:40 Error: Could not connect to server 11:44:40 Trace: CFileZillaEnginePrivate::ResetOperation(2114) 11:44:40 Status: Waiting to retry... 11:44:45 Trace: CControlSocket::DoClose(64) 11:44:45 Status: Connecting to 10.192.7.139:22... 11:44:45 Status: Connection established, waiting for welcome message... 11:44:45 Trace: CFtpControlSocket::OnReceive() 11:44:45 Response: 220-Benvingut al servei FTP del Departament de Treball 11:44:45 Trace: CFtpControlSocket::OnReceive() 11:44:45 Response: 220 Service Ready for new User 11:44:45 Trace: CFtpControlSocket::SendNextCommand() 11:44:45 Command: AUTH TLS 11:44:45 Trace: CFtpControlSocket::OnReceive() 11:44:45 Response: 234 Enabling SSL 11:44:45 Status: Initializing TLS... 11:44:45 Trace: CTlsSocket::Handshake() 11:44:45 Trace: CTlsSocket::OnSend() 11:44:45 Trace: CTlsSocket::OnRead() 11:44:45 Trace: CTlsSocket::Handshake() 11:44:45 Trace: CTlsSocket::OnRead() 11:44:45 Trace: CTlsSocket::Handshake() 11:44:45 Trace: CTlsSocket::OnRead() 11:44:45 Trace: CTlsSocket::Handshake() 11:44:45 Trace: Handshake successful 11:44:45 Trace: Cipher: AES-128-CBC, MAC: SHA1 11:44:45 Status: Verifying certificate... 11:44:45 Trace: CFtpControlSocket::SendNextCommand() 11:44:45 Command: USER sftp 11:44:45 Status: TLS/SSL connection established. 11:45:06 Error: Connection timed out 11:45:06 Trace: CControlSocket::DoClose(2050) 11:45:06 Trace: CFtpControlSocket::ResetOperation(2114) 11:45:06 Trace: CControlSocket::ResetOperation(2114) 11:45:06 Error: Could not connect to server 11:45:06 Trace: CFileZillaEnginePrivate::ResetOperation(2114) 11:45:06 Status: Waiting to retry... 11:45:11 Trace: CControlSocket::DoClose(64) 11:45:11 Status: Connecting to 10.192.7.139:22... 11:45:11 Status: Connection established, waiting for welcome message... 11:45:11 Trace: CFtpControlSocket::OnReceive() 11:45:11 Response: 220-Benvingut al servei FTP del Departament de Treball 11:45:11 Trace: CFtpControlSocket::OnReceive() 11:45:11 Response: 220 Service Ready for new User 11:45:11 Trace: CFtpControlSocket::SendNextCommand() 11:45:11 Command: AUTH TLS 11:45:11 Trace: CFtpControlSocket::OnReceive() 11:45:11 Response: 234 Enabling SSL 11:45:11 Status: Initializing TLS... 11:45:11 Trace: CTlsSocket::Handshake() 11:45:11 Trace: CTlsSocket::OnSend() 11:45:11 Trace: CTlsSocket::OnRead() 11:45:11 Trace: CTlsSocket::Handshake() 11:45:11 Trace: CTlsSocket::OnRead() 11:45:11 Trace: CTlsSocket::Handshake() 11:45:11 Trace: CTlsSocket::OnRead() 11:45:11 Trace: CTlsSocket::Handshake() 11:45:11 Trace: Handshake successful 11:45:11 Trace: Cipher: AES-128-CBC, MAC: SHA1 11:45:11 Status: Verifying certificate... 11:45:11 Trace: CFtpControlSocket::SendNextCommand() 11:45:11 Command: USER sftp 11:45:11 Status: TLS/SSL connection established. 11:45:32 Error: Connection timed out 11:45:32 Trace: CControlSocket::DoClose(2050) 11:45:32 Trace: CFtpControlSocket::ResetOperation(2114) 11:45:32 Trace: CControlSocket::ResetOperation(2114) 11:45:32 Error: Could not connect to server 11:45:32 Trace: CFileZillaEnginePrivate::ResetOperation(2114)

but I'm connect with fireFTP addons firefox

FTPS stopped working in the new update for FileZilla.

Log and message from ISP (Newtek/The Small Business Authority) below: Response: 227 Entering Passive Mode (216,119,77,223,82,18). Command: STOR ship_part1.jpg Response: 150 Opening BINARY mode data connection. Response: 150 Opening BINARY mode data connection. Response: 550 The supplied message is incomplete. The signature was not verified. Error: File transfer failed Status: Starting upload of C:\Users\Jeff\Documents\Visual Studio 2010\Projects\YargisCompetitionWeb\YargisCompetitionWeb\bin\release\Images\prelaunch\ship_part4.jpg Status: Retrieving directory listing... Command: PASV Response: 227 Entering Passive Mode (216,119,77,223,82,13). Command: LIST Response: 150 Opening BINARY mode data connection. Response: 550 The supplied message is incomplete. The signature was not verified. Error: File transfer failed after transferring 320,442 bytes in 6 seconds Status: Starting upload of C:\Users\Jeff\Documents\Visual Studio 2010\Projects\YargisCompetitionWeb\YargisCompetitionWeb\bin\release\Images\prelaunch\ship_part3.jpg Status: Retrieving directory listing... Response: 226 Transfer complete. Command: PASV Command: PASV Response: 227 Entering Passive Mode (216,119,77,223,82,25). Command: STOR ship_part3.jpg Response: 227 Entering Passive Mode (216,119,77,223,82,21). Command: STOR ship_part4.jpg Response: 150 Opening BINARY mode data connection. Response: 150 Opening BINARY mode data connection. Response: 550 The supplied message is incomplete. The signature was not verified. Error: File transfer failed after transferring 320,442 bytes in 9 seconds Status: Starting upload of C:\Users\Jeff\Documents\Visual Studio 2010\Projects\YargisCompetitionWeb\YargisCompetitionWeb\bin\release\Images\prelaunch\ship_part3.jpg Status: Retrieving directory listing...

Hello, Thank you for contacting Newtek, The Small Business Authority. My name is Bryan with the Tech Support Team and I understand that you are having an issue when attempting to upload files to your site using FTPS on port 990. In looking into this issue for you, it would appear that the issue is related to the FTP client you are using when trying to upload files. I was able to replicate the issue using Filezilla. In speaking with one of my Tier 3 Tech Support Agents, I was informed that there is a know issue currently with Filezilla and other clients with uploading files using FTPS. They advised that I try a different FTP client such as CuteFTP to complete the upload using FTPS. I downloaded CuteFTP and confirmed that uploads are successful when connecting with FTPS. Please test on your end and let us know if you run into any further issues. Thank You,

Bryan S. Associate of Technical Support Newtek Technology Services Phone: (602) 263-0300 Opt. 5 URL: ​http://webservices.thesba.com

When connected through FTPS, filezilla shuts down directly after displaying the last log line "initializing TLS". Did not recive any "not responding" dialog or anything. Tried restarting the computer and reinstall filezilla with no luck. Ordinary FTP works with no problems.

My version is 3.2.4.1 FileZilla_3.2.4.1_win32-setup.exe MD5 checksum: 4B4900C2875E07161B4AACA255C71FF5

HP Mini, laptop VIA C7-M 1600MHz (32bit) 1,75GB RAM (Pysical Address Extension)

Host: ftps://hevox.net (Self-signed certificate)

Configured Filezilla server v. 0.9.36 for FTPES and FTPS.

FTPES works OK: at first login server send client certificate, after accepting, it connects to the site. FTPS does not work: same client, same server. Server does not sends certificate to client. Up on connection, I receive error: "500 Syntax error, command unrecognized".

I thought it was due to firewall so installed server and client on the same machine to remove and dependencies on firewall or routers: same result. I tested this with server version 0.9.34, 0.9.35.

CLient is Filezilla 3.3.4.1 but i had same results with SmartFTP client. FTPES log: Status: Resolving address of nycw9854 Status: Connecting to 10.3.7.240:21... Status: Connection established, waiting for welcome message... Response: 220-FileZilla Server version 0.9.36 beta Response: 220 DD Test Command: AUTH TLS Response: 234 Using authentication type TLS Status: Initializing TLS... Status: Verifying certificate... Command: USER ddtest Status: TLS/SSL connection established. Response: 331 Password required for ddtest Command: PASS Response: 230 Logged on Command: SYST Response: 215 UNIX emulated by FileZilla Command: FEAT Response: 211-Features: Response: MDTM Response: REST STREAM Response: SIZE Response: MLST type*;size*;modify*; Response: MLSD Response: AUTH SSL Response: AUTH TLS Response: UTF8 Response: CLNT Response: MFMT Response: 211 End Command: PBSZ 0 Response: 200 PBSZ=0 Command: PROT P Response: 200 Protection level set to P Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current directory. Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (10,3,7,240,19,138) Command: MLSD Response: 150 Connection accepted Response: 226 Transfer OK Status: Directory listing successful Status: Disconnected from server

FTPS log: Status: Resolving address of nycw9854 Status: Connecting to 10.3.7.240:990... Status: Connection established, initializing TLS... Error: Connection timed out Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of nycw9854 Status: Connecting to 10.3.7.240:990... Status: Connection established, initializing TLS... Error: Connection timed out Error: Could not connect to server

Server log:

(000011)9/10/2010 16:46:12 PM - (not logged in) (10.3.7.240)> Connected, sending welcome message... (000011)9/10/2010 16:46:12 PM - (not logged in) (10.3.7.240)> AUTH TLS (000011)9/10/2010 16:46:12 PM - (not logged in) (10.3.7.240)> 234 Using authentication type TLS (000011)9/10/2010 16:46:13 PM - (not logged in) (10.3.7.240)> SSL connection established (000011)9/10/2010 16:46:23 PM - (not logged in) (10.3.7.240)> USER ddtest (000011)9/10/2010 16:46:23 PM - (not logged in) (10.3.7.240)> 331 Password required for ddtest (000011)9/10/2010 16:46:23 PM - (not logged in) (10.3.7.240)> PASS (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> 230 Logged on (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> SYST (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> 215 UNIX emulated by FileZilla (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> FEAT (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> 211-Features: (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> MDTM (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> REST STREAM (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> SIZE (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> MLST type*;size*;modify*; (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> MLSD (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> AUTH SSL (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> AUTH TLS (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> UTF8 (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> CLNT (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> MFMT (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> 211 End (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> PBSZ 0 (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> 200 PBSZ=0 (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> PROT P (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> 200 Protection level set to P (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> PWD (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> 257 "/" is current directory. (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> TYPE I (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> 200 Type set to I (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> PASV (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> 227 Entering Passive Mode (10,3,7,240,19,138) (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> MLSD (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> 150 Connection accepted (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> SSL connection for data connection established (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> 226 Transfer OK (000011)9/10/2010 16:46:31 PM - ddtest (10.3.7.240)> disconnected. (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> Connected, sending welcome message... (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> C (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> ?LŠ™·ù$´26*ŽÃ‚ AŽ¯²N®ç‰ \›&‡(000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 3 (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 9 (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 2 (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 8 (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> f (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> / (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 5 (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000012)9/10/2010 16:46:52 PM - (not logged in) (10.3.7.240)> disconnected. (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> Connected, sending welcome message... (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> C (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> ?LŠ™ä×mCßõ¿Wü è$¥8áâÚVèjÈ!Ú (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 3 (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 9 (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 2 (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 8 (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> f (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> / (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 5 (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000013)9/10/2010 16:47:18 PM - (not logged in) (10.3.7.240)> disconnected.

Filezilla Server and Filezilla client installed on the same machine - for test.

I've set up my server to enable implicit FTPS (port 990) but the unsecure connection method is still accepted too.

When I try to connect to the server using unencrypted method, everything works fine, no matter if I'm local or internet originated. But for FTPS, it's different. From local network, everything is fine, from the internet side the connection goes as far as switching to passive (PASV) mode. From there on, connection hangs. I checked the logs on my client and believe to know the cause (but not the solution): Upon switching to PASV mode, my client is given the local IP-address instead of the real 'outside' ip-address. It is as if the server suddenly believes this connection to be on the local net and thus not send the 'real' address.

I.o.w. when using FTPS and PASV mode enabled for all but local connections, Filezilla server is still sending the local ip-address together with the port nr to use for the passive connection to an external client trying to connect. This isn't so for unsecure connections and therefore I believe this to be a bug.

Client error: FTPS+HTTPPROXY=does not work!

Server: 0.9.22b Client: 2.2.30 Proxy server: any Connection type: FTP over SSL/TLS (implict encryption) + HTTP 1.1 PROXY

These bugs are only with Filezilla client+FTPS+HTTPPROXY. If you use connection at Cuteftp8.0+FTPS+HTTPPROXY or FilezillaClient+FTP+HTTPPROXY, it works. So the problem is with Filezilla client v FTPS+PASV.

=====BUG#1===== Depending on the files in directory, for example, when directory is empty, a client can or can not display the contents of the directory.

CLIENT ERROR LOG FOR "DIR C:\1": [04:05:36] Trace: FtpControlSocket.cpp(1213): List(FALSE,0,"/","1",9) OpMode=0 OpState=-1 caller=0x003bae74 [04:05:36] Status: Retrieving directory listing... [04:05:36] Command: CWD / [04:05:36] Trace: FtpControlSocket.cpp(823): OnReceive(0) OpMode=4 OpState=1 caller=0x003bae74 [04:05:36] Response: 250 CWD successful. "/" is current directory. [04:05:36] Trace: FtpControlSocket.cpp(1213): List(FALSE,0,"","",0) OpMode=4 OpState=1 caller=0x003bae74 [04:05:36] Command: PWD [04:05:36] Trace: FtpControlSocket.cpp(823): OnReceive(0) OpMode=4 OpState=2 caller=0x003bae74 [04:05:36] Response: 257 "/" is current directory. [04:05:36] Trace: FtpControlSocket.cpp(1213): List(FALSE,0,"","",0) OpMode=4 OpState=2 caller=0x003bae74 [04:05:36] Command: CWD 1 [04:05:36] Trace: FtpControlSocket.cpp(823): OnReceive(0) OpMode=4 OpState=3 caller=0x003bae74 [04:05:36] Response: 250 CWD successful. "/1" is current directory. [04:05:36] Trace: FtpControlSocket.cpp(1213): List(FALSE,0,"","",0) OpMode=4 OpState=3 caller=0x003bae74 [04:05:36] Command: PWD [04:05:36] Trace: FtpControlSocket.cpp(823): OnReceive(0) OpMode=4 OpState=4 caller=0x003bae74 [04:05:36] Response: 257 "/1" is current directory. [04:05:36] Trace: FtpControlSocket.cpp(1213): List(FALSE,0,"","",0) OpMode=4 OpState=4 caller=0x003bae74 [04:05:36] Command: TYPE A [04:05:36] Trace: FtpControlSocket.cpp(823): OnReceive(0) OpMode=4 OpState=8 caller=0x003bae74 [04:05:36] Response: 200 Type set to A [04:05:36] Trace: FtpControlSocket.cpp(1213): List(FALSE,0,"","",0) OpMode=4 OpState=8 caller=0x003bae74 [04:05:36] Command: PASV [04:05:36] Trace: TransferSocket.cpp(1137): m_pProxyLayer changed state from 0 to 1 caller=0x00b69a94 [04:05:36] Trace: FtpControlSocket.cpp(823): OnReceive(0) OpMode=4 OpState=7 caller=0x003bae74 [04:05:36] Response: 227 Entering Passive Mode (10,11,2,131,4,80) [04:05:36] Trace: FtpControlSocket.cpp(1213): List(FALSE,0,"","",0) OpMode=4 OpState=7 caller=0x003bae74 [04:05:36] Trace: TransferSocket.cpp(558): SetActive() caller=0x00b69a94 [04:05:36] Command: LIST [04:05:36] Trace: TransferSocket.cpp(1137): m_pProxyLayer changed state from 1 to 2 caller=0x00b69a94 [04:05:36] Trace: TransferSocket.cpp(1137): m_pProxyLayer changed state from 2 to 4 caller=0x00b69a94 [04:05:36] Trace: FtpControlSocket.cpp(823): OnReceive(0) OpMode=4 OpState=9 caller=0x003bae74 [04:05:36] Response: 150 Connection accepted [04:05:36] Trace: FtpControlSocket.cpp(1213): List(FALSE,0,"","",0) OpMode=4 OpState=9 caller=0x003bae74 [04:05:36] Trace: TransferSocket.cpp(446): OnConnect(0) caller=0x00b69a94 [04:05:36] Trace: TransferSocket.cpp(1139): m_pSslLayer changed state from 0 to 4 caller=0x00b69a94 [04:05:36] Trace: TransferSocket.cpp(1139): m_pSslLayer changed state from 4 to 6 caller=0x00b69a94 [04:05:36] Trace: TransferSocket.cpp(518): OnClose(10053) caller=0x00b69a94 [04:05:36] Trace: TransferSocket.cpp(1125): Close() caller=0x00b69a94 [04:05:36] Trace: TransferSocket.cpp(1125): Close() caller=0x00b69a94 [04:05:36] Trace: FtpControlSocket.cpp(1969): TransferEnd(68) OpMode=4 OpState=10 caller=0x003bae74 [04:05:36] Trace: FtpControlSocket.cpp(1213): List(TRUE,64,"","",0) OpMode=4 OpState=10 caller=0x003bae74 [04:05:36] Trace: TransferSocket.cpp(96): ~CTransferSocket() caller=0x00b69a94 [04:05:36] Trace: TransferSocket.cpp(1125): Close() caller=0x00b69a94 [04:05:36] Trace: FtpControlSocket.cpp(3988): ResetOperation(4) OpMode=4 OpState=10 caller=0x003bae74 [04:05:36] Error: Could not retrieve directory listing [04:05:37] Trace: FtpControlSocket.cpp(823): OnReceive(0) OpMode=0 OpState=-1 caller=0x003bae74 [04:05:37] Response: 226 Transfer OK

SERVER LOG (ALWAYS THE SAME): (000010) 1/15/2007 4:20:57 AM - 1 (10.11.2.1)> CWD 1 (000010) 1/15/2007 4:20:57 AM - 1 (10.11.2.1)> 250 CWD successful. "/1" is current directory. (000010) 1/15/2007 4:20:57 AM - 1 (10.11.2.1)> PWD (000010) 1/15/2007 4:20:57 AM - 1 (10.11.2.1)> 257 "/1" is current directory. (000010) 1/15/2007 4:20:57 AM - 1 (10.11.2.1)> TYPE A (000010) 1/15/2007 4:20:57 AM - 1 (10.11.2.1)> 200 Type set to A (000010) 1/15/2007 4:20:57 AM - 1 (10.11.2.1)> PASV (000010) 1/15/2007 4:20:57 AM - 1 (10.11.2.1)> 227 Entering Passive Mode (10,11,2,131,4,148) (000010) 1/15/2007 4:20:57 AM - 1 (10.11.2.1)> LIST (000010) 1/15/2007 4:20:57 AM - 1 (10.11.2.1)> 150 Connection accepted (000010) 1/15/2007 4:20:57 AM - 1 (10.11.2.1)> SSL connection for data connection established (000010) 1/15/2007 4:20:57 AM - 1 (10.11.2.1)> 226 Transfer OK

=====BUG#2===== Uploaded files are of 4096 size, and files that are less than 4096 in size can not be uploaded to the server.

CLIENT ERROR LOG (uploading 1.txt 4 byles long): Trace: FtpControlSocket.cpp(2004): FileTransfer(16843424, FALSE, 0) OpMode=0 OpState=-1 caller=0x0039b1fc Status: Starting upload of C:\2\1.txt Command: TYPE A Trace: FtpControlSocket.cpp(823): OnReceive(0) OpMode=40 OpState=13 caller=0x0039b1fc Response: 200 Type set to A Trace: FtpControlSocket.cpp(2004): FileTransfer(0, FALSE, 0) OpMode=40 OpState=13 caller=0x0039b1fc Command: PASV Trace: FtpControlSocket.cpp(823): OnReceive(0) OpMode=40 OpState=17 caller=0x0039b1fc Response: 227 Entering Passive Mode (127,0,0,1,4,207) Trace: FtpControlSocket.cpp(2004): FileTransfer(0, FALSE, 0) OpMode=40 OpState=17 caller=0x0039b1fc Command: STOR 1.txt Trace: TransferSocket.cpp(1137): m_pProxyLayer changed state from 0 to 1 caller=0x003995ec Trace: TransferSocket.cpp(1137): m_pProxyLayer changed state from 1 to 2 caller=0x003995ec Trace: TransferSocket.cpp(1137): m_pProxyLayer changed state from 2 to 4 caller=0x003995ec Trace: FtpControlSocket.cpp(823): OnReceive(0) OpMode=40 OpState=18 caller=0x0039b1fc Response: 150 Connection accepted Trace: FtpControlSocket.cpp(2004): FileTransfer(0, FALSE, 0) OpMode=40 OpState=18 caller=0x0039b1fc Trace: TransferSocket.cpp(558): SetActive() caller=0x003995ec Trace: TransferSocket.cpp(446): OnConnect(0) caller=0x003995ec Trace: TransferSocket.cpp(1139): m_pSslLayer changed state from 0 to 2 caller=0x003995ec Command: REST 0 Response: 350 Rest supported. Restarting at 0 Status: Disconnected from server Error: Timeout detected! Trace: TransferSocket.cpp(1125): Close() caller=0x003995ec Trace: FtpControlSocket.cpp(1969): TransferEnd(168) OpMode=40 OpState=19 caller=0x0039b1fc Trace: FtpControlSocket.cpp(2004): FileTransfer(0, TRUE, 128) OpMode=40 OpState=19 caller=0x0039b1fc Trace: FtpControlSocket.cpp(1140): DoClose(0) OpMode=40 OpState=19 caller=0x0039b1fc Trace: FtpControlSocket.cpp(3988): ResetOperation(4100) OpMode=40 OpState=19 caller=0x0039b1fc Trace: TransferSocket.cpp(96): ~CTransferSocket() caller=0x003995ec Trace: TransferSocket.cpp(1125): Close() caller=0x003995ec Error: Upload failed

Please fix it asap. Thank you!

Ability to accept a different address from the PORT command, thus enabling the server to send files to a host other than the person logged in.

Site to site transfer ability

It would be a helpful feature to get FXP support in the client

Shea

FileZilla 3.0.0-beta10 regression

port box not getting port numbers, at least not showing up

I am trying to update to FileZilla 3.0.0-beta10 to get the fix for broken connections forgetting the "Resume" choice.

But, after unzipping the windows zip for it, and running it, and adding a new host, and selecting SFTP, I discover what looks like an error in the port box.

The port box doesn't get the correct number -- this works correctly in FileZilla 2.2.30(a?) -- when you select SFTP protocol, the port box is automatically set to 22.

But, with FileZilla 3.0.0-beta10, the port box seems to stay blank.

On Windows 10. When I try to View/Edit a file on the server, it offers to Use system association (which is notepad++ on my machine). However, it then gives error -- File could not be opened. No program associated with this file type. Things work fine with FZ 3.47.2.1

The following bug has appeared today, immediately after I had upgraded Filezilla to version 3.48.0. It didn't happen with previous versions (I have been using FZ daily for years --- thank you for creating this wonderful tool).

Now, whenever I doubleclick a LOCAL file in order to edit it, I get an error message popup reading "Opening failed: The file '[FILENAME HERE]' could not be opened: The associated command failed" (+ OK button). This is a spurious error message, as the file does open just fine. This happens with every local file I try to edit, forcing me to close this popup on every local file edit (a very common occurrence for me). It does not happen with files on the server.

My relevant settings are:

• File lists -> Double-click action on files -> View/Edit
• File editing -> Default editor -> use custom editor -> "C:\Program Files (x86)\Vim\vim74\gvim.exe"
• File editing -> Always use default editor

Additional observation:

• If instead of double clicking the local file, I right click it and select "Edit" the same error appears. However, if I select "Open" it does not.

P.S. Also posted this on the forum.

I believe this issue is new to FZ 3.48.0.

When one reopens a previously-opened server file, one gets a well-known popup asking whether to "Reopen local file" or "Discard local file then download and edit file anew".

Prior to version 3.48.0, IIRC, this popup would come up with a value already selected, that value being the one the user had last selected (i.e. remembering the user's last selection, whether reopen or discard). As of version 3.48.0, this is no longer the case. The popup always comes up defaulting to "reopen", which is slightly inconvenient for me, as I almost always require "discard" (i.e. an extra click).

Not a huge issue, but it would be nice to have FZ return to remembering one's choice (or alternatively adding an option as to what should be the default value for this popup).

FZ will transfer all files but at the end the UI just drops out. I wish there would be a way to provide more details over and above what the "FileZilla.log" in "debug" mode can provide?

FZ fails at end of transfer on Mac OS 11.2.2

I was trying to delete from an FTP site some directories containing pictures. I noticed that when trying to delete the directories containing lots of files (> 500), at some point the client crashes (the window dissapears completely). For this reason, I cannot provide you with the debug logs which I activated to "verbose" level.

A work-around is to select some files and delete them, and then select another batch, until the directory gets small enough to be deleted without crash.

I have FZ updated automatically to 3.0.3, but I didn't notice this behaviour the previous version (which honestly, I don't know what it was).

My hardware (if needed): Intel Core 2 Duo E6600, 2GB RAM

Hi, I have a serious problem with ftps on my eeePC (WinXP Home 32, intel atom): as soon as i use ftps (SSL), filezilla(3.3.4.1) keeps hanging up the entire system and sometimes even crashes. the connections are really slow and the gui is not really responsive. connecting over normal ftp is no problem. i use filezilla server(0.9.37 beta) on my other pc(Win7 x64, Core i7), which is pretty fast and has no problems with this.

i understand that ssl needs cpu power, but is it necessary to crash filezilla?

Hi, as summary says it crashes during startup *if* it doesn't find last local directory anymore (i.e. if I change its name or I remove it *after* last FZ client termination.

Depending on the modification date/time of the file/directory, Macromedia's DreamWeaver will add an extra space to the start of the name when parsing the results from a LIST on version 0.93 of FileZilla server.

This stops DreamWeaver users from being able to access many of the folders on an FTP site served by FileZilla.

This appeared to be fixed in 0.89, but is back in 0.92 and 0.93.

I understand that FTP clients shouldn't be depending on LIST per the RFC, however, this is no consolation to the many DreamWeaver users out there.

I know that FileZilla Server is able to find out the external IP address. This solves the PASV mode problem for those behind firewalls.

However, any user that belong to the local area network will also connect to my computer via the external IP which is not what I want. They should connect to my 192.168.x.x

If I am connecting to my server via 127.0.0.1, then the PASV mode should also send me to 127.0.0.1, not the 192.168.x.x or the external IP address.

The above mentioned has been implemented long time ago on WarFTPd. Take a look at their version 1.82 RC9. I hope you get what I mean.

Thanks.

I downloaded the new versionof Filezilla server, and when double-clicked the exe file pops open a window that looks like it will run like the installer for the client of FZ, but after a fraction of second it disappears and nothing happens.

In case I had a bad transfer I went ahead and downloaded it again from a different mirror, with the same result. To be extra a redundant I tried it one more time a couple hours later, and had the same result.

I tried to eliminate anything on my end which may be interfering, such as antivirus software and other apps, and still have not been able to get it to work, so I thought I should let you know.

Thanks for a great product - I appreciate Filezilla immensely!

FileZilla Server - Unhandled exeption

A client app submits "LIST SESS*.REQ". FZ 1.5.1 answers: "550 Couldn't open the file or directory". (there was a file SESS0099.REQ in the user's home-dir (Native path)).

I tried to track the problem down using Sysinternals Procmon and compared it to FZ 0.9.60.2: obviously Fz 0.9.60.2 executes the "LIST SESS*.REQ" differently to FZ 1.5.1. (see attached files)

Attached files should clarify the issue.

The log window area of the Admin tool changes the font color to black but leaves the background color up to Windows. This makes the log messages invisible unless the text is selected when Windows uses a black background (such as the High Contrast Themes).

If FileZilla Server is Offline and you open the Group Management FZ duplicates all Groups. Looks like it happens only if there are no users configured.

This bug applies to all version of FZ Server, even the newest one, while using Windows Explorer and Clover extension for Windows Explorer (in order to have folder tabs).

During drag&drop operation between local folder and ftp folder managed by FZ Server, FZ Server will delete file if drag&drop operation was unsuccessful (if source file is dropped on ribbon bar).

If you successfully drag file from ftp folder and drop it in local folder tab (folder window), file will be copied and source file will remain intact.

If you accidentally drag&drop source file to the Windows Explorer (in my case w/Clover) ribbon bar, FZ Server will delete file (with DELE command.)

It's better to check this soon, because today I've lost my files just by doing plain drag&drop operation. It may be not even FZ Server bug, but it's better to be sure it's Windows Explorer or Clover to blame for.

Video explanation of the bug: ​https://www.youtube.com/watch?v=rKuVM3n1Q2g

Log: (000005) 9.4.2018. 14:03:59 - locus (192.168.1.21)> noop (000005) 9.4.2018. 14:03:59 - locus (192.168.1.21)> 200 OK (000005) 9.4.2018. 14:03:59 - locus (192.168.1.21)> CWD /r/fz_mystery_deleted/ (000005) 9.4.2018. 14:03:59 - locus (192.168.1.21)> 250 CWD successful. "/r/fz_mystery_deleted" is current directory. (000005) 9.4.2018. 14:03:59 - locus (192.168.1.21)> DELE fz_will_delete_this_file.CR2 (000005) 9.4.2018. 14:03:59 - locus (192.168.1.21)> 250 File deleted successfully (000006) 9.4.2018. 14:03:59 - (not logged in) (192.168.1.21)> Connected on port 21, sending welcome message... (000006) 9.4.2018. 14:03:59 - (not logged in) (192.168.1.21)> 220-FileZilla Server 0.9.60 beta (000006) 9.4.2018. 14:03:59 - (not logged in) (192.168.1.21)> 220-written by Tim Kosse (tim.kosse@…) (000006) 9.4.2018. 14:03:59 - (not logged in) (192.168.1.21)> 220 Please visit https://filezilla-project.org/ (000006) 9.4.2018. 14:03:59 - (not logged in) (192.168.1.21)> USER locus (000006) 9.4.2018. 14:03:59 - (not logged in) (192.168.1.21)> 331 Password required for locus (000006) 9.4.2018. 14:03:59 - (not logged in) (192.168.1.21)> PASS * (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> 230 Logged on (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> SYST (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> 215 UNIX emulated by FileZilla (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> FEAT (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> 211-Features: (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> MDTM (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> REST STREAM (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> SIZE (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> MLST type*;size*;modify*; (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> MLSD (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> UTF8 (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> CLNT (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> MFMT (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> EPSV (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> EPRT (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> 211 End (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> OPTS UTF8 ON (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> 202 UTF8 mode is always enabled. No need to send this command. (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> PWD (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> 257 "/" is current directory. (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> TYPE I (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> 200 Type set to I (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> PASV (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> 227 Entering Passive Mode (192,168,1,22,244,55) (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> SIZE /r/fz_mystery_deleted/fz_will_delete_this_file.CR2 (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> 550 File not found (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> MDTM /r/fz_mystery_deleted/fz_will_delete_this_file.CR2 (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> 550 File not found (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> RETR /r/fz_mystery_deleted/fz_will_delete_this_file.CR2 (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> 550 File not found (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> PASV (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> 227 Entering Passive Mode (192,168,1,22,232,198) (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> CWD /r/fz_mystery_deleted/fz_will_delete_this_file.CR2 (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> 550 CWD failed. "/r/fz_mystery_deleted/fz_will_delete_this_file.CR2": directory not found. (000006) 9.4.2018. 14:03:59 - locus (192.168.1.21)> disconnected.

I would really like to see the server's log file inside the console a link on the menu to the log folder will be nice too :-)

FZ always disconnects right after file transfers. It should keep the connection active forever like in WS_FTP Pro.

​http://forum.filezilla-project.org/viewtopic.php?f=2&t=11989

Thanks.

Ubuntu 7.04 with filezilla 3 beta 8.

Some weird overwrite problem.

I upload a folder with files. Then I rename the remote folder to something else. Then I upload again the same folder. FileZilla ask me if I want to overwrite each files one by one. Even if I cancel and delete all in the queue, refresh the remote listing and upload again, he will still ask me to overwrite or not. The only exit is to close FZ and run it again.

Here is what the logs are saying.

LOGS :

Commande STOR Bailaproductions.com.JPG Réponse: 150 Accepted data connection Réponse: 226-ASCII Réponse: 226-Options: -a -l Réponse: 226 3 matches total Réponse: 553-Can't open that file: No such file or directory Réponse: 553 Rename/move failure: No such file or directory Réponse: 150 Accepted data connection Réponse: 226-ASCII Réponse: 226-Sorry, we were unable to read . Réponse: 226-Options: -a -l Réponse: 226 0 matches total Commande TYPE I Statut: Débute le téléversement de /home/aracine/multimedia/photos originales/irfanview-temporaire/Belinda and Guesley.JPG Commande TYPE I Statut: Liste du répertoire complétée Réponse: 200 TYPE is now 8-bit binary Commande PASV Réponse: 200 TYPE is now 8-bit binary Commande PASV Réponse: 227 Entering Passive Mode (70,85,236,34,121,239) Commande STOR Belinda and Guesley.JPG Réponse: 227 Entering Passive Mode (70,85,236,34,52,79) Commande STOR bailaproductions dance troupe.JPG Réponse: 553-Can't open that file: No such file or directory Réponse: 553 Rename/move failure: No such file or directory Réponse: 553-Can't open that file: No such file or directory Réponse: 553 Rename/move failure: No such file or directory Statut: Débute le téléversement de /home/aracine/multimedia/photos originales/irfanview-temporaire/Belinda and Guesley.JPG Statut: Extraction de la liste du répertoire... Commande TYPE I Statut: Débute le téléversement de /home/aracine/multimedia/photos originales/irfanview-temporaire/bailaproductions dance troupe.JPG Statut: Extraction de la liste du répertoire... Commande SIZE Belinda and Guesley.JPG Commande TYPE I Réponse: 200 TYPE is now 8-bit binary Réponse: 550 Can't check for file existence Commande MDTM Belinda and Guesley.JPG Réponse: 200 TYPE is now 8-bit binary Commande PASV Réponse: 550 Can't check for file existence Réponse: 227 Entering Passive Mode (70,85,236,34,63,132)

[etc]

Do you want the logs level 3 ? I can reproduce this.

My options: Transfer/Send/action by defaulf Edit/parameters/transferts/Action for existing file/replace when size differs or source is more recent

ZF always ask for a new name to rename the distant file instead of overwriting it.

Hello. There are many wildly used ftp servers default to not allow APPE command. Sometimes the upload connection breaks, and FZ tries to APPE, receiving the message:

451 format_de.tpl: Append/Restart not permitted.

FZ records an error, and tries it again. Failed certain times, FZ state the file as "Too many error attempt."

What's worse, that if a user clears these file states, and tries to upload them again, he goes into the error circle again, each file fails certain times and quit from the queue. The user actually get no way to upload the files from the queue.

Yesterday I spent a night to upload about 9000 files, about 300 files are not successfully uploaded. They are nightmares to me. I can clear the status, but the queue remain unsuccess because FZ always tries to tell the server APPE without luck.

I suggest 1) filezilla recognize the "451 Append/Restart not permitted." message and try to STORE in that case; 2) there be an option in the preference to let FZ never use APPE.

working w/ two external monitors on Mac OS X 10.10 Yosemite and FZ client 3.9.0.6 is sometimes only showing lower half of FZ window. Other upper half is out of monitor. Could be a Mac OS X 10.10 Yosemite bug as well.

Hello all,

FileZilla client fails to download a file with a space as first character in SFTP mode. When starting the transfert, file is added to "Queued files" and then moved to "Failed transfers" with message "Could not start transfer"

Sorry if it's a duplicate...

client info from Help/About menu :

FileZilla Client

Version: 3.9.0.1

Build information:

Compiled for: x86_64-pc-linux-gnu Compiled on: x86_64-pc-linux-gnu Build date: 2014-07-24 Compiled with: gcc (Debian 4.9.1-1) 4.9.1 Compiler flags: -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.1 GnuTLS: 3.2.16 SQLite: 3.8.5

Operating system:

Name: Linux 3.14-2-amd64 x86_64 Version: 3.14

My Setup: FileZilla Client 3.3.0.1 on Windows 7 and Windows Server 2008 R2, Apple's FTP sharing server on MacOSX 10.6.2, working in gigabit local area network.

After I updated FileZilla to the current version on Win7, I successfully transfered 5 files to the FTP server. It was always the same file, I just modified it multiple times between the uploads. So after uploading this file 5 times, I tried to upload it another time. FileZilla tried to start the download, but instantly after starting, the network connection gets broken - I don't have any connection to my network now. I can use Windows' "troubleshoot problems" feature from the network icon's context menu, which will say the following:

Problems found The connection between your access point, router, or dable modem and the Internet is broken -- Detected The default gateway is not available -- Fixed

After that, the network connection works fine. But as soon as I start a transfer with FileZilla, it breaks every time. This is permanent, restarting FileZilla or rebooting Windows does not help.

FTP transfers with the Windows Explorer work fine.

I also tested this on Windows Server 2008 R2. The issue is quite the same except that instead of breaking the network connection, FileZilla instantly freezes the whole OS when uploading the file for the 6th time and afterwards. There isn't even a bluescreen, and no way to recover except for the reset button on my PC. The server is installed on the same hardware as 7. I had Windows XP installed on it before, and there were no issues with FileZilla.

I had an older version of FileZilla (can't remember which one) installed on Windows 7 before updating to 3.3.0.1, it showed the same behaviour. After updating, it did 5 successful transfers and then re-entered this permanent error state.

It might be a driver problem, but I see no reason why the transfer would succeed the first 5 times and fail afterwards - there has to be some FileZilla-specific problem behind it. Also, there are no problems with the Windows Explorer FTP feature.

Version: FZ Client 2.2.19a

Steps to reproduce:

• Launch FZ Client

• Enter any valid hostname into the "Address" box of

the Quickconnect toolbar, and add a trailing space. For example, "ftp.wustl.edu "

• Click Quickconnect

FZ can't resolve the host name, and times out.

The same problem occurs if a connection is created in site manager with a trailing space in the hostname. Leading spaces, however, do not cause a problem.

This is a minor issue, but keep in mind that it's not uncommon to get trailing white space if you copy a hostname out of a text file and paste it into FZ.

All is in the summary

You run FileZilla (2.1.9a) and select a site to connect from bookmark, and after the connection and download / upload you go out from pg.

When you run the pgm next time and select the bookmark manager, the default selected item is not last used item (in previuos session) but the firsi site/folder in list

FZ Version: 3.1.5.1 Issue also vitnessed in version 3.1.2, 3.1.5 Issue does not exist in (at least) version 2.2.11

When FTP server return, f.e., "257 "9.256/" is current directory." upon FZ issuing command "PWD", FZ fails to parse with (debug) message "ControlSocket.cpp(356): Failed to parse returned path. caller=0p13482d8".

Also, when I manually type in a directory name with a trailing / in the "Remote site:" field, FZ strips the trailing slash before sending it to the server. Observable in the message log: Command: CWD /9.258 And also observable in a Packetcapture.

rgds, Henrik.

My filezilla client keeps freezing up when moving files over. What can I do to fix this?

The server appears to be pulling the servers SSL certificate and not the sites. This is demonstrated by the error message shown to me and the servername not matching the site name. The SSL has been issued by Let's Encrypt.

WHAT IS THE FIELD COMPONENT???

FileZilla Client

Version: 3.32.0

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2018-04-03 Compiled with: x86_64-w64-mingw32-gcc (GCC) 6.3.0 20170516 Compiler flags: -g -O2 -Wall

Linked against:

wxWidgets: 3.0.5 SQLite: 3.22.0 GnuTLS: 3.5.18

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 Settings dir: C:\Users\Bob\AppData\Roaming\FileZilla\

My FZ app had worked for past 4 months, thankyou.

For the last 2 weeks upon attempting to launch it falls over leaving an Error message "F4MDamageTitleStr" followed by "F4MDamageMessageStr".

To try to work around the problem, I have on four occasions:

1. uninstalled and trashed the original app
2. downloaded the currently available zip file (FileZilla_3.6.0.2_i686-apple-darwin9.app.tar) from your site
3. unzipped it
4. attempted to launch, but
5. it doesn't. It just displays Error message "F4MDamageTitleStr (followed by) F4MDamageMessageStr" for 10 seconds
6. sometimes followed by "FZ quit unexpectedly..."

I now don't know whether I was originally using 3.6.0.1 or 3.6.0.2 (and at any rate 3.6.0.1 isn't now available on your web-site). I have since also downloaded the new "FileZilla_3.7.0-rc1_i686-apple-darwin9.app.tar" but it gives me the same problem.

Mac support tell me they can't recognise it as Mac-related and believe it's software related. Can you help please as it was such a good FTP app. Hopeful, Rob

While uploading a .csv with 5,788,101 bytes, the "Target File Already Exists" message appears after uploading anywhere from 287721 to 1,693,059 bytes prompting to overwrite file. Using ASCII transfer type on FileZilla 3.1.5, This does not happen on another client running FZ 3.1.2.

I was evaluating the IP*Works component and found it not to work with FZ server in FTP implicit mode. The guys at IP*Works responded right away and tried to research the issue. There's what they said:

" Our developers have done some more research on this issue, and there are some problems here that appear to be with the server. Since it is still in beta, this is not very surprising. In Explicit mode on upload, the component simply closes the data connection but the server reports a 426 FTP error. I'm not sure why the server is doing this, since the component is performing the appropriate action. In Implicit, it appears that the server is not even responding to the SSL handshake for the data connection. At this point, there is nothing that can be done within the component to accommodate this server. Hopefully when the server is no longer in Beta, these issues will have been resolved. At that time, if there are still some other problems, we will be happy to investigate them. You may also consider reporting these errors to the makers of the FTP server for their input and consideration. "

Any comments?

An attempt to have the FZ server service run under a user other than local system causes the service to fail on startup (and remain unstartable/unstoppable as a service).

Steps to reproduce: a) create a local user, say "ftp" b) change that user's group to "guest". c) set FZ server login credentials to user=ftp d) try to (re)start the service.

Result: the service is hung and does not respond to attempts to start or stop it. It cannot be killed, and cannot be connected to by the FZ server interface.

An attempt to have the FZ server service run under a user other than local system causes the service to fail on startup (and remain unstartable/unstoppable as a service).

Steps to reproduce: a) create a local user, say "ftp" b) change that user's group to "guest". c) set FZ server login credentials to user=ftp d) try to (re)start the service.

Result: the service is hung and does not respond to attempts to start or stop it. It cannot be killed, and cannot be connected to by the FZ server interface.

This fixes the following VS2005 compile error on the misc/HyperLink.* files:

Error 1 error C2440: 'static_cast' : cannot convert from 'UINT (thiscall CHyperLink::* )(CPoint)' to 'LRESULT (thiscall CWnd::* )(CPoint)' d:\development\temporary\filezilla\filezilla\source\misc\hyperlink.cpp 71

When attempting to connect to some FTP servers that use spanish messages, FZ3 times out without even detecting the username/password prompt.

This is under Ubuntu Edgy, english language installation, and Filezilla 3 BETA 7.

I have the ES locale installed as can be seen below:

ariel@polaris:~$ sudo dpkg-reconfigure locales Generating locales...

doneen_AU.UTF-8... done ..... es_AR.UTF-8... done es_BO.UTF-8... done es_CL.UTF-8... done es_CO.UTF-8... done es_CR.UTF-8... done es_DO.UTF-8... done es_EC.UTF-8... done es_ES.UTF-8... done .....

Generation complete.

An then tried:

ariel@polaris:~$ export LC_ALL=es_ES.UTF-8 ariel@polaris:~$ filezilla

With or without the export I get the same timeout problem.

FZ2 (with Wine) works with no problems in the same machine / Ubuntu OS.

GNU's ftp client also works fine with these sites.

Examples:

FZ3 fails: Status: Resolving IP-Address for ftp.wiroos.com Status: Connecting to 200.43.193.72:21... Status: Connection established, waiting for welcome message... Response: 220-FTP server ready. Status: Invalid character sequence received, disabling UTF-8. Select UTF-8 option in site manager to force UTF-8. Response: Error: Connection timed out Error: Could not connect to server

GNU ftp works fine:

ftp ftp.wiroos.com Connected to ftp.wiroos.com. 220-FTP server ready. 220 Este es un sistema privado - No se permiten usuarios an�nimos Name (ftp.wiroos.com:mi_usuario):

It would be great to have this fixed :)

Ubuntu 7.whatever (latest stable) FileZilla 3 latest stable (cannot tell anymore)

I'll explain what happened in all detail I can remember. I deleted some files on my local drive.

/home/nyp/folder/file

No problems until I deleted one particular folder which resulted in wiping my entire /home directory.

It' name was like "/home/nyp/.Virtualbox/shared/Hitman Blood Money". Marked it, chose 'delete' and waited... Deletion went on and on and I got suspicious so I checked my free space. Before deletion there were 2% of space free now it was 97%. So I killed FileZilla which was still very busy removing files at that time and looked at what was left. Barely nothing. I lost all of my emails, my logins, password, programming projects, scripts, settings -> simply everything that was "in reach" of FileZilla. I got really mad but well... couldn't send you any hatemails

I guess you chose the name "FileZilla" for a reason.

As this is a major bug and not a feature (well at least I have plenty of space now) I thought I should report it and warn others. DON'T EVER USE FILEZILLA FOR DELETING FILES ON YOUR DRIVE!

Would be nice if official releases would be double checked for bugs like these. rm -rf / should never be possible!

BTW. There's another bug when a connection is interrupted, one clicks on reconnect and immediately after reconnecting uploads a file. Although the correct folder is being displayed in the window, the file (sometimes?) is uploaded to the wrong folder. Can be quite annoying if one wanted to upload an let's say index.php to a testfolder and it ends up live on a busy website.

Thanks for reading. I'm sorry I can't provide any logs or anything else for that matter. FileZilla was pretty thorough.

All settings concerning the layout ex: queue columns resize, local and remote directory tree toggles are reset to their initial size when FZ is closed. It would be so sweet to hold those settings, this way avoiding doing them all over again, when working.

Thanks a lot, FileZilla 3 finally comes to life and it rocks! :)

Actually, if you have reinstalled your OS Win7/8/8.1 FZS isn't able to convert the stored values in FileZilla Server.xml to %appdata%/FileZilla Server/FileZilla Server Interface.xml

If I try to manually add the config the programm isn't able to read them correctly.

Beacuse an import/export function is currently missing I report this as an Bug with the highest priority which has to bef ixed in the next few day's!

I can't accept that a programm with stored config values in XML don't have an import/export function - this is the first thing/function which MUST BE ADDED!

Your FZC has this function but why is it not included in FZS?

Priority: CRITICAL!!! Solved until: Next few days!!!

I would like to be able to setup FileZilla Server to send different welcome messages to each user or group.

Thanks, Charles J. Tabony

This patch cleans-up the NSI script a bit and makes it use the installation directory of a previous installation by default (if applicable).

for a security encrypted data transfer :)

Hello, listing an existing file using ? character as unknown character is failing with an error not corresponding to the problem : 550 Directory not found Here is the client log :

root@RESP12_250# ftp greg Connected to greg. 220-FileZilla Server version 0.9.19 beta 220-written by Tim Kosse (Tim.Kosse@…) 220 Please visit ​http://sourceforge.net/projects/filezilla/ Name (greg:lsav): lsav 331 Password required for lsav Password: 230 Logged on ftp> ascii 200 Type set to A ftp> cd request 250 CWD successful. "/request" is current directory. ftp> ls 200 Port command successful 150 Opening data channel for directory list. gs_VOORD.20061109.1833 226 Transfer OK 24 bytes received in 0.014 seconds (1.67 Kbytes/s) ftp> ls gs_VOORD.??????.???? 200 Port command successful 550 Directory not found

Here is the Filezilla Server Log : (000079) 09/11/2006 18:56:05 - (not logged in) (172.16.112.200)> Connected, sending welcome message... (000079) 09/11/2006 18:56:05 - (not logged in) (172.16.112.200)> 220-FileZilla Server version 0.9.19 beta (000079) 09/11/2006 18:56:05 - (not logged in) (172.16.112.200)> 220-written by Tim Kosse (Tim.Kosse@…) (000079) 09/11/2006 18:56:05 - (not logged in) (172.16.112.200)> 220 Please visit ​http://sourceforge.net/projects/filezilla/ (000079) 09/11/2006 18:56:05 - (not logged in) (172.16.112.200)> USER lsav (000079) 09/11/2006 18:56:05 - (not logged in) (172.16.112.200)> 331 Password required for lsav (000079) 09/11/2006 18:56:05 - (not logged in) (172.16.112.200)> PASS (000079) 09/11/2006 18:56:05 - lsav (172.16.112.200)> 230 Logged on (000079) 09/11/2006 18:56:05 - lsav (172.16.112.200)> CWD request (000079) 09/11/2006 18:56:05 - lsav (172.16.112.200)> 250 CWD successful. "/request" is current directory. (000079) 09/11/2006 18:56:05 - lsav (172.16.112.200)> TYPE A (000079) 09/11/2006 18:56:05 - lsav (172.16.112.200)> 200 Type set to A (000079) 09/11/2006 18:56:05 - lsav (172.16.112.200)> PORT 172,16,112,200,168,148 (000079) 09/11/2006 18:56:05 - lsav (172.16.112.200)> 200 Port command successful (000079) 09/11/2006 18:56:05 - lsav (172.16.112.200)> NLST gs_VOORD.????????.???? (000079) 09/11/2006 18:56:05 - lsav (172.16.112.200)> 550 Directory not found (000079) 09/11/2006 18:56:05 - lsav (172.16.112.200)> QUIT (000079) 09/11/2006 18:56:05 - lsav (172.16.112.200)> 221 Goodbye (000079) 09/11/2006 18:56:05 - lsav (172.16.112.200)> disconnected.

After some minutes, the server blocked file transfer. There were two simultaneous downloads (global limited to 8kb/s) and one upload. After this I tried to stop the service, but i could not do this. The service was not accessible.

I think the welcome message should be updated every time it is changed.

Currently I have to restart the server for the changes to take effekt.

Configuration:

Multihomed windows machine, IP 1.2.3.4 and 1.2.3.5

Filezilla server 0.9.1b, configured to listen on 1.2.3.5 and to use 1.2.3.5 for PASV too

Problem:

opening an ftp (active) session to 1.2.3.5:21 works and the logon completes successfully, but trying to retrieve bombs with a "425 Can't open data connection" error

running a "netstat -an" on the machine running FZserver shows the 1.2.3.5:21 in ESTABLISHED state but also shows some 1.2.3.4:20 in TIME_WAIT state, this seems to indicate that FZServer isn't using the correct IP for the data channel when running on a multihomed system even if it has been configured to use a particular IP a confirm is the fact that using PASV solves the issue since in that case the FZserver will be forced to use the correct IP address

I have connected to my Windows 2003 Server, where FileZilla server 0.9.2 is running, with "Remote Desktops" wich is a part of the adminpack (with this one you can connect to the console of 2003 server). Then FileZilla Interface crashed with dr.watson. But this does not happen always.

Connect to FZServer using the admin interface on another computer. If you want to add a directory (in the user accounts dialog), the directory chooser shows the local filesystem. But it is no use, if I choose a local directory which does not exist on the server.

Workaround is to press cancel and type in the directory manually.

I think the directory chooser should always display the file system on the server.

Is it possible to adopt the user interface of the user dialog in order to change the width of the 'directory/alias list'.

Because in my case I have long directory and alias names, and I want to show more at one view. So doubling the width of that list would be nice).

The file- and directory privileges could than be placed under the directory/alias list.

I am using FileZilla Server 0.9.2 beta. If I'm connected to a remote Server and want to edit the shared Folders for Groups and Users, the browse for folder dialog gives me not the directory structure of the remote machine. Instead it displays the local filesystem. Manually changing (rename) the path to the wanted directory on the traget machine works.

Another odd problem: no mapping of virtual folders into virtual folders is possible.

Thanx in advance for fixing this, and keep up the good work.

Missing a couple of lines of code to set the title of the Groups and Users dialog boxes.

CUsersDlg.cpp BOOL CUsersDlg::OnInitDialog() {

SetTitle("Users"); <<<

CSAPrefsDialog::OnInitDialog();

CGroupsDlg.cpp BOOL CGroupsDlg::OnInitDialog() {

SetTitle("Groups"); <<<

CSAPrefsDialog::OnInitDialog();

I realize this really isn't a bug but I hope it's useful.

Glen

Steps:

1. FileZilla Server Interface
2. Menu->Edit->Settings->IP Filter
3. Press ESC key in a textbox

Result: The dialog become blank(see attach)

I think the ESC key should close the dialog.