Custom Query (4044 matches)

While connecting to SFTP we are facing an error in login. Error 'Could not get reply from fzputtygen'. Please help me in troubleshooting the error

If the local folder (no matter it's located in HDD or external USB drive) selected contains more than 10,000 files (in my case 14,600 JPEGs, with average file size <1MB), I quitted the FileZilla client and re-opens again, it takes at least 5 minutes to see the interface (not even started to connect to any server). My iMac was idle at that moment (no other software using significant resources).

Can the startup performance be improved?

iMac (21.5-inch, Late 2013) CPU: 3.1GHz Quad-Core Intel i7 RAM: 16GB 1600MHz DDR3 HDD: 512GB SSD External HDD: HGST 5TB 2.5" HDD

Trying to update FileZilla from 3.46.3 to 3.56 on MacOS 10.15.7. Downloaded installer FileZilla_3.56.0_macosx-x86.app.tar.bz2. Unpacked it using WinZip, in Downloads folder. Double-clicking on the FileZilla.app icon gets this message: The application “FileZilla.app” can’t be opened. Version 3.46.3 works fine. I tried renaming ~/.config/filezilla (rather than deleting it), but it did not help. I checked, but did not find a ticket about this problem. Advice? Thank you, Stan Hendryx, stanhx@…

Following error message appears when attempting TLS login:

A packet with illegal or unsupported version was received.

TLS login worked fine until the most recent update to 3.56.0.

All SSH connections to different accounts hosted at Strato in Germany get refused suddenly on my Mac.

Solution: Had to replace Servername 'ssh.strato.de' with the ip-adress (which I found out by pinging ssh.strato.de). You should fix this problem, because the soliotion isn't obvious and not documented at Strato or elsewhere!

BtW: Connections to servers NOT hosted at Strato were not affected within the same client on the same Mac.

Connection to host works fine with FileZilla_3.52.2_win64. On installation of 3.56.0 connection fails with "GnuTLS error -8: A packet with illegal or unsupported version was received."

Reinstalling 3.52.2 restores ability to connect.

FileZilla Client

Version: 3.56.0

Build information:

Compiled for: x86_64-pc-linux-gnu Compiled on: x86_64-pc-linux-gnu Build date: 2021-10-11 Compiled with: gcc (Debian 8.3.0-6) 8.3.0 Compiler flags: -O2 -g -Wall -Wextra -pedantic -Wno-cast-function-type -ffunction-sections -fdata-sections

Linked against:

wxWidgets: 3.0.6 SQLite: 3.31.1 GnuTLS: 3.7.2

Operating system:

Name: Linux 5.4.0-89-generic x86_64 Version: 5.4

Bug is also in official Ubuntu repository version 3.46.3

###

Filezilla shows the logged in user as owner of all files and directories instead of real owner

hello team, i am a filezilla user, recently i update the software to FileZilla_3.56.2 , after doing this FTP not working.

Status: Connecting to 162.241.85.69:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Command: USER giveuc2t Response: 331 User giveuc2t OK. Password required Command: PASS Response: 530 Login authentication failed Error: Critical error: Could not connect to server

for every FTP account same happening, please help me to connect FTP.

One more thing left local path folders & file not showing.

Workaround: Drop files from Windows Explorer into remote server folder on the right.

FileZilla Client

Version: 3.56.2

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2021-10-27 Compiled with: x86_64-w64-mingw32-gcc (GCC) 10-win32 20210110 Compiler flags: -O2 -g -Wall -Wextra -Wno-deprecated-copy -ffunction-sections -fdata-sections -Wno-cast-function-type

Linked against:

wxWidgets: 3.0.6 SQLite: 3.35.5 GnuTLS: 3.7.2

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx aes pclmulqdq rdrnd lm Settings dir: C:\Users\Valeri\AppData\Roaming\FileZilla\

22. 3.56.2 pulls 'Gnu TLS error -8: unsupported version" when connecting to a site whose highest active TLS version is 1.2. filezilla.xml has this:

3.56.0-rc1 (2021-09-29)

+ Right-clicking a queue tab header now opens the same context menu as right-clicking the correponding queue contents
+ By default, the minimum allowed TLS version is now TLS 1.2
+ Optionally, the systen trust store can be used for certificate verification
- FTP: Fixed an issue with key file conversion
- Fixed an issue loading servers not supporting session resumption from storage
</Setting>
		<Setting name="Window position and size">0 306 14 1402 924 </Setting>
		<Setting name="Minimum TLS Version">2</Setting>
		<Setting name="Trust system trust store">0</Setting>
		<Setting name="Greeting version">3.56.2</Setting>

The line for Minimum TLS Version is clearly in error -- surely this should be "1.2" not "2". Worse, when I make that change and run FileZilla, the number reverts to "2".

I get a message saying that it the file I wanted to drag to the server already exist. When I click cancel - I get a message saying the file transfer was successfully completed - which it is. So, it might be that the algorithm is trying to copy the same file twice?

Download an already existing file, when asked whether to overwrite or not answer with "Yes": the date and time of creation of the overwritten file will be of the previous file.

Hi,

I have updated the Filezilla recently and after update, the local folders are not visible. Unable to upload folders having files. It is uploading the empty folder only. I have to enter the folder and then upload the files individually in each folder.

Here is the details of client: FileZilla Client

Version: 3.56.2

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2021-10-27 Compiled with: x86_64-w64-mingw32-gcc (GCC) 10-win32 20210110 Compiler flags: -O2 -g -Wall -Wextra -Wno-deprecated-copy -ffunction-sections -fdata-sections -Wno-cast-function-type

Linked against:

wxWidgets: 3.0.6 SQLite: 3.35.5 GnuTLS: 3.7.2

Operating system:

Name: Windows 7 (build 7600), 64-bit edition Version: 6.1 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 lm Settings dir: C:\Users\Vijay\AppData\Roaming\FileZilla\

Please let me know how to revert this update. Because previous version was working perfectly.

Hello, my Client got an Problem where she couldnt log in in our FTP Server it worked before but now she only gets the error Failed to connect to the server, on other PCs it worked but for her not. Is it maybe because she is using a vpn to connect to our Server and using wlan that it is too slow.

best regards Adrian Reider

I'm not sure whether this bug is reporting directory listing failures on client-local or server directories, but I'm seeing a very abbreviated server directory listing for one of my server directories.

I can see them all fine by logging in to the server via Putty, and I can't see any variation in the permissions that would prevent the listing.

Curiously, of the directory and files that are listed, only one of them actually exists on the server, all the ones from the synchronized client listing (which is accurate) also appear in the server listing (those include the one listed that actually exists on the server), and then there are two listed in the server listing that do not exist on either side.

This seems like a quite serious bug, disabling FileZilla when the bug is triggered. I have no idea what triggers it, not all directory listings seem as incomplete as this one I was trying to access today.

FileZilla Client

Version: 3.56.2

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2021-10-27 Compiled with: x86_64-w64-mingw32-gcc (GCC) 10-win32 20210110 Compiler flags: -O2 -g -Wall -Wextra -Wno-deprecated-copy -ffunction-sections -fdata-sections -Wno-cast-function-type

Linked against:

wxWidgets: 3.0.6 SQLite: 3.35.5 GnuTLS: 3.7.2

Operating system:

Name: Windows 10 (build 19042), 64-bit edition Version: 10.0 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi bmi2 adx lm Settings dir: C:\Users\glenn\AppData\Roaming\FileZilla\

For the last two or three versions, I keep getting a 'new version available' message, but in the pop after startup (same when clicking the top menu item) I see: "The new version could not be downloaded".

The links with details and website just below that text only show when I hover them, I discovered this by accident. "Details" say: Started update check on 2021-12-13 19:41:59 Own build type: official Requesting ​https://update.filezilla-project.org/update.php Resolving address of update.filezilla-project.org Connecting to 49.12.121.47:443... Connection established, initializing TLS... Verifying certificate... TLS connection established, sending HTTP request File transfer successful, transferred 1,318 bytes in 1 second Parsing 1318 bytes of version information. Found new nightly 2021-12-13 Found new release 3.57.0

in the list of files or directories retrieved from the remote server, the date is sometimes not displayed correctly : a file changed 2021-12-01 is displayed 2021-01-12.

this creates download mistakes when I choose replace when newer

FileZilla Client

Version: 3.57.0

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2021-12-10 Compiled with: x86_64-w64-mingw32-gcc (GCC) 10-win32 20210110 Compiler flags: -O2 -g -Wall -Wextra -Wno-deprecated-copy -ffunction-sections -fdata-sections -Wno-cast-function-type

Linked against:

wxWidgets: 3.0.6 SQLite: 3.35.5 GnuTLS: 3.7.2

Operating system:

Name: Windows 10 (build 19043), 64-bit edition Version: 10.0 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx aes pclmulqdq rdrnd lm Settings dir: C:\Users\jean-paul\AppData\Roaming\FileZilla\

I am trying to upload a new file, and I keep getting the following error message: Status: Connecting to mftgateway.changehealthcare.com... Response: fzSftp started, protocol_version=11 Command: open "EYE35413@…" 22 Error: Could not connect to server

I have updated and we are on the latest version. Please call or email. 940-691-5645, emily@…. Thank you!

I downloaded and installed the update, 3.57.0. Now it will not connect when I enter command-R. Says TLS connection is established, enters the password (which has not changed), then times out. I restarted, but with same problem. Other FTP software works just fine. Only change is the new FileZilla.

installed the new release version 3.57.0, the local site failed to load any directory or files.

2021-12-16 17:16:11 19888 1 Status: Resolving address of login.microsoftonline.com 2021-12-16 17:16:11 19888 1 Status: Connecting to 40.126.24.83:443... 2021-12-16 17:16:11 19888 1 Status: Connection established, initializing TLS... 2021-12-16 17:16:12 19888 1 Status: TLS connection established, sending HTTP request 2021-12-16 17:16:12 19888 1 Command: POST /common/oauth2/v2.0/token HTTP/1.1 2021-12-16 17:16:12 19888 1 Command: Accept: */* 2021-12-16 17:16:12 19888 1 Command: Connection: keep-alive 2021-12-16 17:16:12 19888 1 Command: Content-Length: 995 2021-12-16 17:16:12 19888 1 Command: Content-Type: application/x-www-form-urlencoded 2021-12-16 17:16:12 19888 1 Command: Host: login.microsoftonline.com:443 2021-12-16 17:16:12 19888 1 Command: Keep-Alive: 300 2021-12-16 17:16:12 19888 1 Command: User-Agent: FileZilla/3.57.0 2021-12-16 17:16:12 19888 1 Response: HTTP/1.1 401 Unauthorized 2021-12-16 17:16:12 19888 1 Response: Cache-Control: no-store, no-cache 2021-12-16 17:16:12 19888 1 Response: Pragma: no-cache 2021-12-16 17:16:12 19888 1 Response: Content-Type: application/json; charset=utf-8 2021-12-16 17:16:12 19888 1 Response: Expires: -1 2021-12-16 17:16:12 19888 1 Response: Strict-Transport-Security: max-age=31536000; includeSubDomains 2021-12-16 17:16:12 19888 1 Response: X-Content-Type-Options: nosniff 2021-12-16 17:16:12 19888 1 Response: P3P: CP="DSP CUR OTPi IND OTRi ONL FIN" 2021-12-16 17:16:12 19888 1 Response: x-ms-request-id: 1200d32a-a908-4fd4-96ef-42b6d59f2000 2021-12-16 17:16:12 19888 1 Response: x-ms-ests-server: 2.1.12261.14 - EUS ProdSlices 2021-12-16 17:16:12 19888 1 Response: Set-Cookie: fpc=Apa8c7DhgvlJrSHoQKLaJ_qZ8cOmAQAAAKuxTdkOAAAA; expires=Sat, 15-Jan-2022 22:16:12 GMT; path=/; secure; HttpOnly; SameSite=None 2021-12-16 17:16:12 19888 1 Response: Set-Cookie: x-ms-gateway-slice=estsfd; path=/; secure; samesite=none; httponly 2021-12-16 17:16:12 19888 1 Response: Set-Cookie: stsservicecookie=estsfd; path=/; secure; samesite=none; httponly 2021-12-16 17:16:12 19888 1 Response: Date: Thu, 16 Dec 2021 22:16:12 GMT 2021-12-16 17:16:12 19888 1 Response: Content-Length: 471 2021-12-16 17:16:12 19888 1 Error: Could not connect to server 2021-12-16 17:16:12 19888 1 Status: Waiting to retry... 2021-12-16 17:16:26 19888 1 Status: Resolving address of login.microsoftonline.com 2021-12-16 17:16:26 19888 1 Status: Connecting to 40.126.24.83:443... 2021-12-16 17:16:26 19888 1 Status: Connection established, initializing TLS... 2021-12-16 17:16:26 19888 1 Status: TLS connection established, sending HTTP request 2021-12-16 17:16:26 19888 1 Command: POST /common/oauth2/v2.0/token HTTP/1.1 2021-12-16 17:16:26 19888 1 Command: Accept: */* 2021-12-16 17:16:26 19888 1 Command: Connection: keep-alive 2021-12-16 17:16:26 19888 1 Command: Content-Length: 995 2021-12-16 17:16:26 19888 1 Command: Content-Type: application/x-www-form-urlencoded 2021-12-16 17:16:26 19888 1 Command: Host: login.microsoftonline.com:443 2021-12-16 17:16:26 19888 1 Command: Keep-Alive: 300 2021-12-16 17:16:26 19888 1 Command: User-Agent: FileZilla/3.57.0 2021-12-16 17:16:26 19888 1 Response: HTTP/1.1 401 Unauthorized 2021-12-16 17:16:26 19888 1 Response: Cache-Control: no-store, no-cache 2021-12-16 17:16:26 19888 1 Response: Pragma: no-cache 2021-12-16 17:16:26 19888 1 Response: Content-Type: application/json; charset=utf-8 2021-12-16 17:16:26 19888 1 Response: Expires: -1 2021-12-16 17:16:26 19888 1 Response: Strict-Transport-Security: max-age=31536000; includeSubDomains 2021-12-16 17:16:26 19888 1 Response: X-Content-Type-Options: nosniff 2021-12-16 17:16:26 19888 1 Response: P3P: CP="DSP CUR OTPi IND OTRi ONL FIN" 2021-12-16 17:16:26 19888 1 Response: x-ms-request-id: b750ca18-3973-4672-b8df-bba3fe652200 2021-12-16 17:16:26 19888 1 Response: x-ms-ests-server: 2.1.12261.14 - SCUS ProdSlices 2021-12-16 17:16:26 19888 1 Response: Set-Cookie: fpc=ArTxQSDEUWhBr0SZaS-dg82Z8cOmAQAAALmxTdkOAAAA; expires=Sat, 15-Jan-2022 22:16:26 GMT; path=/; secure; HttpOnly; SameSite=None 2021-12-16 17:16:26 19888 1 Response: Set-Cookie: x-ms-gateway-slice=estsfd; path=/; secure; samesite=none; httponly 2021-12-16 17:16:26 19888 1 Response: Set-Cookie: stsservicecookie=estsfd; path=/; secure; samesite=none; httponly 2021-12-16 17:16:26 19888 1 Response: Date: Thu, 16 Dec 2021 22:16:26 GMT 2021-12-16 17:16:26 19888 1 Response: Content-Length: 471 2021-12-16 17:16:26 19888 1 Error: Could not connect to server

The "Always trust this certificate in future sessions" and "Trust this certificate on the listed alternative hostnames" checkboxes are greyed out and cannot be clicked.

Dialog pops up again next time the site is opened.

Erreur : Erreur critique lors du transfert du fichier Erreur : Erreur GnuTLS -110 dans gnutls_record_recv: The TLS connection was non-properly terminated. Statut : Le serveur n'a pas correctement fermé la connexion TLS Erreur : Impossible de lire depuis le socket : ECONNABORTED - Connexion annulée Erreur : Déconnecté du serveur

On the logging settings panel (see screen capture) there is a browse button. I assumed this would open the folder specified - ie my windows temporary folder. However, clicking BROWSE opens a folder to which I had recently exported a site definition, not the folder containing the logs.

This is not a serious problem as I was able to browse to the appropriate folder, and then view the logs, but that does take a little time! If I correctly understood the way this is supposed to work it would be nice to have it fixed.

FileZilla Client

Version: 3.28.0

Build information:

Compiled for: x86_64-pc-linux-gnu Compiled on: x86_64-pc-linux-gnu Build date: 2017-10-29 Compiled with: gcc (Ubuntu 7.2.0-12ubuntu1) 7.2.0 Compiler flags: -g -O2 -fdebug-prefix-map=/build/filezilla-YKhf0t/filezilla-3.28.0=. -fstack-protector-strong -Wformat -Werror=format-security -Wall

Linked against:

wxWidgets: 3.0.3 SQLite: 3.22.0 GnuTLS: 3.5.18

Operating system:

Name: Linux 4.15.0-163-generic x86_64 Version: 4.15 CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi2 bmi2 Settings dir: /home/stas/.config/filezilla/

Bug Description: I'm not seeing files with hebrew charecters in the files, local and remote.

FileZilla Client Version: 3.57.0 Build information: Compiled for: x86_64-pc-linux-gnu Compiled on: x86_64-pc-linux-gnu Build date: 2021-12-12 Compiled with: gcc (GCC) 11.2.0 Compiler flags: -O2 -g -pipe -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -Wall Linked against: wxWidgets: 3.0.5 SQLite: 3.36.0 GnuTLS: 3.7.2 Operating system: Name: Linux 4.15.0-163-generic x86_64 Version: 4.15 CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi bmi2 lm Settings dir: /home/stas/.config/filezilla/

Bug Description: I'm not seeing files with hebrew charecters in the files, local and remote.

So facing this error from couple of days,

initailly in the logs on the client - 234 Using authentication type TLS Status: Initializing TLS... and then I get the error of Error: Connection timed out after 40 seconds of inactivity Error: Could not connect to server

I have tried all the possible fixes available online but nothing works, please assist asap

I used xyplorer(third party application) instead of windows explorer Not too long ago, when drag & drop any file from filezill to xyplorer, it's success with no error. But! now, isn't working.

[Alert Error Dialog Message] Cloud not determine the target of the Drag&Drop operation. Either the shell extension is not installed properly or you didn't drop the file into an Explorer window.

And, a directory is generated on the xyplorer window which name is 'fz3-16414476052330'

I hope to solve this problem, Please help me.

In windows 11, I have enabled Windows's Long Path and having a LONG PATH enabled ftp server, when using FileZilla Client, somehow the file is not uploaded into intended long path dir, the maximum length of the dir that i can upload a file into is around below 1.024 characters.

So for example I am uploading a file into a dir in the ftp server which having length of 1.822 characters, filezilla client will cut off the directory and will uploaded it into below 1.024 characters length directory, instead of in the 1.822 character length directory.

How to overcome the 1.024 character length directory into 32.767 character length (​https://docs.microsoft.com/en-us/windows/win32/fileio/maximum-file-path-limitation?tabs=cmd), 32.767 is the new maximum total characters path length .

Bonjour, Votre logiciel refuse d’envoyer un fichier depuis chez moi sur mon site internet as moi. Comment corriger ça ? Sont message d’erreur : Commande : STOR WinVer.exe Réponse : 150 Opening BINARY mode data connection for WinVer.exe Réponse : 550 Virus Detected and Removed: Win.Trojan.Gdsda-6878765-0 Comment transféré ce logiciel créer par moi sans aucun virus ! Eric Gontier

using filezilla to download directories from a openVMS system. The OpenVMS system has a directory named "CON". filezilla creates a directory in windows called "CON" when I ftp the directory but it causes issue since this is an invalid directory name. Explorer wouldn't do anything when I tried to delete the 'CON' directory, cmd.exe gave an 'access is denied' when I would try to remove the directory. Checking security and trying to do anything on the folder that was created would just result in various errors about access denied, unexpected error, undetermined error etc. Researching I found that there certain keywords that are not allowed to be used as directory names and "CON" is one of those. I was able to eventually remove the directory but I had to search around to find a specific rd command to do this as the other options (rd, rmdir, explorer) wouldn't remove the directory.

I use FileZilla on OpenSUSE Tumbleweed.

It used to be the case that, when FileZilla finished uploading or downloading a bunch of files, if FileZilla was not the currently focus application, it would emit a baloon notification on the bottom right of the screen just above the tray icons, system clock, etc. I'm not sure what those notifications are called.

Now it has stopped doing that, and I haven't touched any configuration.

Response: 550 Failed to change directory. Error: Failed to retrieve directory listing

I can't load or copy 2 directories from the FTP Server. The owner claims that all affiliates have the same rights. Another FTP client e.g. CoreFTP works properly.g.

Wen I press the 'Refresh the file and folder lists' button for a connection where I have configured a 'default local directory', the file browser for the local side changes to display that folder. I usually do not want that, but just to reload the remote side and stay in the same directory locally.

I am unable to log in my ftp account using filezilla. Getting error "Connection attempt failed with "ETIMEDOUT - Connection attempt timed out"."

I tried to log in by site manager option by selecting plain ftp(insecure) option but unable to log in.

I Installed a new version of filezilla still getting same error.

Please help out!

I am using PortableApps version and each start warning me about "unclean" shutdown and need re-open and start again

I have been using filezilla for years. I have always used the synchronized browsing. It has stopped working for me.

Windows 10 Filezilla version 3.57.0

i just go to my game panel, open any 3 pages and filezilla freezes. windows 11. 32gb 3600mhz samsung 980pro ssd intel i5 12600K gtx 1070

I just installed the latest version of Filezilla, 3.57.0. Now when I try to upload files to my website, I get these error messages: "331 Password required" and "Critical error: Could not connect to server."

I have never experienced this before, in all the years I have been using Filezilla.

10:03:40 Status: Connecting to 192.168.102.129:21... 10:03:40 Status: Connection established, waiting for welcome message... 10:03:40 Status: Initializing TLS... 10:03:41 Status: TLS connection established. 10:03:41 Status: Logged in 10:03:41 Status: Retrieving directory listing... 10:03:41 Status: Directory listing of "/" successful 10:03:51 Status: Retrieving directory listing of "/2-整机_成套"... 10:03:52 Status: Directory listing of "/2-整机_成套" successful 10:03:58 Status: Retrieving directory listing of "/2-整机_成套/6-整机_成套产品测试报告、说明书等"... 10:03:58 Status: Directory listing of "/2-整机_成套/6-整机_成套产品测试报告、说明书等" successful 10:06:05 Status: Disconnected from server: ECONNABORTED - Connection aborted 10:06:58 Status: Connecting to 192.168.102.129:21... 10:06:58 Status: Connection established, waiting for welcome message... 10:06:58 Status: Initializing TLS... 10:06:58 Status: TLS connection established. 10:06:58 Status: Logged in 10:06:58 Status: Starting upload of C:\Users\Frek\Documents\WeChat Files\wxid_50xnz06z38ud22\FileStorage\File\2022-02\1105029903010002-储能变流器模块-INPPCS-1000.4-W-114 A1.xlsx 10:06:58 Command: CWD /2-整机_成套/6-整机_成套产品测试报告、说明书等 10:06:58 Response: 250 CWD command successful. 10:06:58 Command: TYPE I 10:06:58 Response: 200 Type set to I. 10:06:58 Command: PASV 10:06:58 Response: 227 Entering Passive Mode (192,168,102,129,195,54). 10:06:58 Command: STOR 1105029903010002-储能变流器模块-INPPCS-1000.4-W-114 A1.xlsx 10:06:58 Error: Failed to convert command to 8 bit charset 10:06:58 Error: File transfer failed 10:06:58 Status: Starting upload of C:\Users\Frek\Documents\WeChat Files\wxid_50xnz06z38ud22\FileStorage\File\2022-02\1105029903010002-储能变流器模块-INPPCS-1000.4-W-114 A1.xlsx 10:06:58 Status: Retrieving directory listing of "/2-整机_成套/6-整机_成套产品测试报告、说明书等"... 10:06:58 Command: PASV 10:06:58 Response: 227 Entering Passive Mode (192,168,102,129,195,55). 10:06:58 Command: LIST 10:06:58 Response: 150 Opening BINARY mode data connection. 10:06:59 Response: 226-Directory has 131,607,658,496 bytes of disk space available. 10:06:59 Response: 226 Transfer complete. 10:06:59 Command: PASV 10:06:59 Response: 227 Entering Passive Mode (192,168,102,129,195,56). 10:06:59 Command: STOR 1105029903010002-储能变流器模块-INPPCS-1000.4-W-114 A1.xlsx 10:06:59 Error: Failed to convert command to 8 bit charset 10:06:59 Error: File transfer failed

10:06:59 Status: Starting upload of C:\Users\Frek\Documents\WeChat Files\wxid_50xnz06z38ud22\FileStorage\File\2022-02\1105029903010002-储能变流器模块-INPPCS-1000.4-W-114 A1.xlsx

10:06:59 Status: Retrieving directory listing of "/2-整机_成套/6-整机_成套产品测试报告、说明书等"... 10:06:59 Command: PASV 10:06:59 Response: 227 Entering Passive Mode (192,168,102,129,195,57). 10:06:59 Command: LIST 10:06:59 Response: 150 Opening BINARY mode data connection. 10:06:59 Response: 226-Directory has 131,607,658,496 bytes of disk space available. 10:06:59 Response: 226 Transfer complete. 10:06:59 Command: PASV 10:06:59 Response: 227 Entering Passive Mode (192,168,102,129,195,58).

10:06:59 Command: STOR 1105029903010002-储能变流器模块-INPPCS-1000.4-W-114 A1.xlsx

10:06:59 Error: Failed to convert command to 8 bit charset

10:06:59 Error: File transfer failed

10:06:59 Status: Retrieving directory listing of "/2-整机_成套/6-整机_成套产品测试报告、说明书等"... 10:06:59 Status: Directory listing of "/2-整机_成套/6-整机_成套产品测试报告、说明书等" successful

10:07:42 Status: Starting upload of C:\Users\Frek\Documents\WeChat Files\wxid_50xnz06z38ud22\FileStorage\File\2022-02\1105029903010002-储能变流器模块-INPPCS-1000.4-W-114-A1.xlsx

10:07:42 Status: Server did not properly shut down TLS connection

10:07:42 Status: File transfer successful, transferred 67,081 bytes in 1 second

10:07:42 Status: Retrieving directory listing of "/2-整机_成套/6-整机_成套产品测试报告、说明书等"... 10:07:43 Status: Calculating timezone offset of server... 10:07:43 Status: Timezone offset of server is 28800 seconds. 10:07:43 Status: Directory listing of "/2-整机_成套/6-整机_成套产品测试报告、说明书等" successful

1105029903010002-储能变流器模块-INPPCS-1000.4-W-114 A1.xlsx 1105029903010002-储能变流器模块-INPPCS-1000.4-W-114-A1.xlsx 这两个文件一样，就文件名不一样。上面一个可上传，下面一个上传不了。

Hello,

I am trying to SFTP to another box on my network. The workstation I am using is Kubuntu 20.04.4 LTS, x86_64, fully patched. Kubuntu uses KDE, and includes Filezilla 3.46.3-1build1.

My network is setup for public key authentication only. All machines have the following:

$ cat /etc/ssh/sshd_config.d/10-pubkey_auth.conf 
# Disable passwords
PasswordAuthentication no
ChallengeResponseAuthentication no
KerberosAuthentication no
KerberosOrLocalPasswd no
GSSAPIAuthentication no
UsePAM no

# Enable public key
PubkeyAuthentication yes

I have my keys in $HOME/.ssh. I use them all the time for SSH and SCP:

$ ls ~/.ssh
authorized_keys  id_dsa      id_ecdsa      id_ed25519      id_rsa      known_hosts
config           id_dsa.pub  id_ecdsa.pub  id_ed25519.pub  id_rsa.pub

When I try to SFTP to a box with Filezilla, I am getting tripped up because the UI does not allow me to select a private key in the Browse for Key File dialog. The private keys are missing from the selection:

The dialog also does not automatically select the private key based on a selected public key. (I have to select a public key because that's the only thing displayed).

I don't know if this behavior is specific to Kubuntu, or if it is present in all Debian or Ubuntu derivatives. (This is my first time using Filezilla).

Using Windows 10 Version 21H2 (OS build 19044.1556)

Filezilla version 3.58.0

When downloading files, the mouse becomes jerky and stutters as I try to move it. When the download completes, it goes back to normal.

The computer in question is a laptop, so I'm using an external wireless mouse (logitech m325) - and while this problem is happening, mouse functions are smooth using the laptop's track pad. I am using microsoft provided mouse drivers.

Greets 2 All! I do new install filezilla on clear system, 3.57.0/3.58.0 (local site) Left panel not shows any dirs & files but if I install older version, on the same system, for example, 3.53.1 or 3.16.0 - It shows normally all files & directories. "Where is the hidden dog"?

I'm using FileZilLa client 3.58 on a Win10 Pro workstation to connect to a Sony Deck Recorder through FTP Protocol. The connection is successful but when I tried to download or Upload a file it's says "421 1 users (the maximum) are already logged in" and follow "could not connect to the server"

When I'm doing the same thing while using or old Win 7 workstation with FileZilla 2.2.27 all went well.

All the firewall are off on both workstation. Is there any services you're aware of which could block the connection ?

FileZilla is a very efficient file mover. However, there is a problem of time stamp marking where the moved file has the "modified" date as the current date instead of the original "modified" date of the file being moved. This problem occurs with the FileZilla menu selection "Preserve timestamps of transferred files" activated.

For reference, the Windows 10 copy and robocopy utilities preserve both the "modified" and "created" dates.

This FileZilla operation causes my backup operations using robocopy to needlessly copy files that are already up-to-date.

I've attached three file properties screen shots - 1) the original file; 2) the FileZilla upload; and 3) the robocopy upload. Notice the time stamps of the original and robocopy file are identical while the FileZilla file has a different "Created" date

I have one biiig file on my FTP-server - about 97Gb. When transferring the file, I get "Error: File transfer failed after transferring 9 031 122 944 bytes in 1810 seconds"

It looks like the transfer resume, but it is really confusing that the transfer fails after each 1810 seconds.

(I have tried with Windows 10 Command-line FTP and WinSCP and noen of those fails).

Nice if that can be sorted / fixed in an upcoming version.

Copy from my Log-window

20:39:19 Status: Starting download of /PGS18M09CGR_KPSDM_Final_stack_time_full_4_36_Deg_Ph180.sgy 20:39:19 Command: CWD / 20:39:19 Response: 250 CWD command successful. 20:39:19 Command: PWD 20:39:19 Response: 257 "/" is current directory. 20:39:19 Command: TYPE I 20:39:19 Response: 200 Type set to I. 20:39:19 Command: PASV 20:39:19 Response: 227 Entering Passive Mode (77,241,105,219,20,75). 20:39:19 Command: RETR PGS18M09CGR_KPSDM_Final_stack_time_full_4_36_Deg_Ph180.sgy 20:39:19 Response: 150 Opening BINARY mode data connection. 21:09:29 Error: Disconnected from server: ECONNABORTED - Connection aborted 21:09:29 Error: File transfer failed after transferring 9 031 122 944 bytes in 1810 seconds 21:09:29 Status: Resolving address of ftp.dno.no 21:09:29 Status: Connecting to 77.241.105.219:21... 21:09:29 Status: Connection established, waiting for welcome message... 21:09:29 Status: Initializing TLS... 21:09:29 Status: TLS connection established. 21:09:29 Status: Logged in 21:09:29 Status: Starting download of /PGS18M09CGR_KPSDM_Final_stack_time_full_4_36_Deg_Ph180.sgy 21:09:29 Status: Testing resume capabilities of server 21:09:29 Command: TYPE I 21:09:29 Response: 200 Type set to I. 21:09:29 Command: PASV 21:09:29 Response: 227 Entering Passive Mode (77,241,105,219,20,80). 21:09:29 Command: REST 97583988599 21:09:29 Response: 350 Restarting at 97583988599. 21:09:29 Command: RETR PGS18M09CGR_KPSDM_Final_stack_time_full_4_36_Deg_Ph180.sgy 21:09:29 Response: 150 Opening BINARY mode data connection. 21:09:31 Response: 226 Transfer complete. 21:09:31 Command: PASV 21:09:31 Response: 227 Entering Passive Mode (77,241,105,219,19,236). 21:09:31 Command: REST 9031385088 21:09:31 Response: 350 Restarting at 9031385088. 21:09:31 Command: RETR PGS18M09CGR_KPSDM_Final_stack_time_full_4_36_Deg_Ph180.sgy 21:09:31 Response: 150 Opening BINARY mode data connection. 21:39:42 Error: Disconnected from server: ECONNABORTED - Connection aborted 21:39:42 Error: File transfer failed after transferring 9 207 283 712 bytes in 1810 seconds 21:39:42 Status: Resolving address of ftp.dno.no 21:39:42 Status: Connecting to 77.241.105.219:21... 21:39:42 Status: Connection established, waiting for welcome message... 21:39:42 Status: Initializing TLS... 21:39:42 Status: TLS connection established. 21:39:42 Status: Logged in 21:39:42 Status: Starting download of /PGS18M09CGR_KPSDM_Final_stack_time_full_4_36_Deg_Ph180.sgy 21:39:42 Status: Testing resume capabilities of server

i try all versions portable cludnt version server version

i cannot list my owner pc Harddisk C or D or any one from stick i can connect the server and transfer files from server to my laptop but ohnly on Main Drive like D or D i cannot list any folder on my Lapto to see files or folder on my PC on Server side i can see folder and change them and can see files too und transfer them in both ways .

But no version and latest version 3.58.0 64bit dont whant open any folder on my laptop . win 7 Pro

Upgrading from Filezilla 3.40 to 3.58 (64 bit on Win 7), version 3.58 always shows file list for local machine as blank or no files. Cannot find solution in forum or other tickets.

Also could not find on download options to fetch older versions - was unable to use FTP for days until found a copy of 3.40.

Keep up the good work, Filezilla is the best FTP client available, but when it fails, we fall into the blackhole. :)

I keep trying to log in on the website and every time I try to connect it just says Error: Connection timed out after 20 seconds of activity and could not connect to server. I'm unsure how to fix this.

FileZilla reject my wildcard letsencrypt cert with a error code Other clients like lftp are working.

Server ftp.joelmueller.ch

When I click View/Edit a file on the server it opens in Notepad++ for me. When I edit the file and save, it does not save back to the server. However, when I close Filezilla it asks me if I really want to quit. Whatever I answer it pops up the File has changed window and will save the file to the server. I just updated to 3.59.0 this morning and this started happening.

Right after I logged in to File Zilla using the previous version, 10 minutes later I decided to get the new version and my login failed. I get this message: Status: Connecting to sc800.whpservers.com... Error: fzsftp could not be started Error: Could not connect to server Status: Waiting to retry... Status: Connecting to sc800.whpservers.com... Error: fzsftp could not be started Error: Could not connect to server

Is this error from FileZilla or my website host?

Win 7 32bit, Lenovo T410s , Filezilla Portable on a removable HDD

Your version: 3.46.3 Current version: 3.59.0

during an attempt at installing update from a clean load it reported that a file was "already open". I aborted. Now every time I load Filezilla I get an a dialog showing "an error occurred saving the transfer queue to" then next line - queue.sqlite3 which curiously is located in my system drive.

I have replaced the whole folder with a backup. The error now is permanent on load & unload.

Do I vainly keep on trying to update & replace from backup? or is there a solution? A clean install requires data. It would take a long time.

When in a directory on the server side, highlighting a file and choosing "Delete" from the dropdown menu, the confirmation dialog box does not place focus on the default button "Yes".

I have reported it several times, but success remains out. Not only unfortunate but also disappointing. I have to use WinSCP (PC) and SolidExplorer (Android, tablet) to log in to my provider (Ziggo, Netherlands) with the Webdav protocol. FilezillaPro always generates the error message "too many redirections". This is due to FilezillaPro, because I use the same data and settings as with WinSCP and Solidexplorer. Logging in with these apps goes without a hitch. I tried everything with Filezilla Pro, but nothing helps. I thought I'd make another attempt here, before I throw off Filezilla Pro

I edited a file on my Server, saved it and tried to upload it again. It took way to long, so i closed FileZilla. Before its closed it ask me to transfer the file which i edieted before to the server. Dont mind if you press yes or no. The file is completly empty on the Server if you run FileZilla again and look for the file.

Two days ago, I updated the FileZilla on the latest version, and the bugs with the File has change popup started immediately.

Nothing happens once I edit and save the file (from the server opened with FileZilla) in my IDE. It usually popup the File that has changed so I can click on YES and save it.

I figure it out that once I save the file, I go to FileZilla and click on Site Manager->Cancel; only then the File has change popup will appear so I can click on YES to upload the file to the server.

I'm attaching two videos on Google Drive to see the issue. In video 1.mov, you can see that nothing is happening once I save the file on IDE and go to FileZilla, and in video 2.mov, you will see what I do to trigger the File has change popup.

You can see the video on the following link: ​https://drive.google.com/drive/folders/1NxBe6XbJ3vRliNVV95XNgEOcHHwwjD-4?usp=sharing

I'm using the latest version of the macOS Monterey 12.3.1, PHPStorm, and FileZilla. (Also, I tried with Visual Studio Code, and the issue is still there).

This bug is giving me a hard time while I'm working. I'm hoping that you will treat this as an urgent issue.

Also, it would be great if you, in the meantime, give me the older version so I can switch it while you are working on the mentioned bug.

Thanks, Marko

Correct German is "Verzeichnissen", not "Verzeichnisse" (see attachment or ​https://calavivo.coach/verzeichnissen.jpg)

Hi!

I updated to version 3.59.0 in Windows 11, but at various times an error occurs that says that more than 20 simultaneous connections are not allowed and it is disconnected. Even changing the value in the settings. In previous versions this problem does not happen. I went back to the previous version 3.57.0 and it works normally.

Thanks!

Hello im using hp laptop and my phone as wlan internet provider. SOmetimes my hp will lose WLAN connection and retries it. In this behaviour Filezilla:

Komento: cd "/home/dh_g2amwh/tfj.iware.fi/public/packages/ext-theme-classic/resources/images/tree" Virhe: Tiedostonsiirto epäonnistui "File transfer failed" Tila: Yhdistetään kohteeseen jerroi.dreamhosters.com... "Try again" Virhe: Yhteyden aikakatkaistu, koska yhteys oli toimimattomana 20 sekuntia "Connection waited 20s" Virhe: Tiedostonsiirto epäonnistui "File transfer failed"

So FileZilla will sometimes freeze on this. Now filezilla wont progress anything, wont connect new connection to new tab onlything that helps is to restart Filezilla and start upload of 15k files again.

FileZilla wont keep connection alive somehow and results frozen behaviour. Unstead of try connect you could use somekind of is internet alive loop that waits connection to internet then tries continue. But the connector will break filezilla as it is for now. And very fustruation as I have 15k files for my app and if it breaks somewhere in 5k to go I have to try send 15k again just to filezilla check if to overjump files wich will take a lot of time again.

And since FileZilla dont have filetransfer saving or current session saver script it wont remember filetransfer on restart which is a bit annoying.

The client is connecting to a server behind an NAT router, whose IP address facing us is also a private address, as illustrated below.

+-----------+   +-------------|------+   +--------------+
| my client |   |    NAT router      |   | their server |
| 172.x.x.x +---+ 192.168.x.x | 10.x +---+   10.x.x.x   |
+-----------+   +-------------|------+   +--------------+

I left the setting for "Connection / FTP / Passive mode" by default, to "Use the server's external IP address instead". However, it did not work for me.

The attached log file 20220601-1751.log shows at lines 82 and 161 that the server replied with its private address, and a netstat command on the client at the moment showed it was actually trying to connect to exactly the server's private address.

I noticed a trace message in the log file, i.e.

Destination IP of data connection does not match peer IP of control connection. Not binding source address of data connection.

Having searched this message in the source code, I arrived at function CTransferSocket :: SetupPassiveTransfer, and found that its host argument seemed to be assigned in the function CFtpRawTransferOpData :: ParsePasvResponse.

Inside ParsePasvResponse, the condition for assigning the peerIP from the control socket to the host_ of the passive data connection is an un-routable data peer address as well as a routable control peer address. Unfortunately, with all un-routable, internal addresses for both data and control, my scenario effectively bypasses this mechanism.

At the end of the ParsePasvResponse function, I noticed that I can instruct the client to always use server address by setting the option OPTION_PASVREPLYFALLBACKMODE to 2, which is set by an option named Pasv reply fallback mode, stored in %appdata%\FileZilla\filezilla.xml. I wonder the intention on omitting this option in the settings UI, although it indeed provides a workaround for my situation in the current version.

I find this issue when connecting via SFTP to MacOS's built-in ssh server, though I expect the issue occurs with all SFTP servers.

To reproduce

• On the server create a directory ending in a space (ex: "Test ")
• Add some files to the directory (ex: "1.txt", "2.txt", etc.)
• Connect to the server via SFTP using FileZilla on Windows
• Attempt to download the directory

Result

• FileZilla will create the directory "Test" (notice no space)
• FileZilla will attempt to download "1.txt" to "Test \1.txt"
• FileZilla will encounter an error because the folder "Test " does not exist

Workaround

• Manually create "Test " NOTE: most Windows utilities will trim spaces from a folder name. I was able to create the directory using WSL 1.0
• Re-try downloading the folder
• FileZilla will create the folder "Test", but will download files to the "Test " folder you manually created.
• You can manually delete the empty folder "Test"

Proposed solution

FileZilla should either

• Correctly create directories with spaces OR
• Always trim spaces from folder names

Version information

FileZilla Pro
-------------

Version:          3.59.0

Build information:
  Compiled for:   x86_64-w64-mingw32
  Compiled on:    x86_64-pc-linux-gnu
  Build date:     2022-04-11
  Compiled with:  x86_64-w64-mingw32-gcc (GCC) 10-win32 20210110
  Compiler flags:  -O2 -g -Wall -Wextra -Wno-deprecated-copy -ffunction-sections -fdata-sections -Wno-cast-function-type

Linked against:
  wxWidgets:      3.0.6
  SQLite:         3.35.5
  GnuTLS:         3.7.2

Operating system:
  Name:           Windows 10 (build 19044), 64-bit edition
  Version:        10.0
  Platform:       64-bit system
  CPU features:   sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi bmi2 adx lm
  Settings dir:   C:\Users\jpenn\AppData\Roaming\FileZilla\

Hi.

There is a long list of compilation errors when I try to build FileZilla on Mageia Cauldron.

gcc -DHAVE_CONFIG_H   -I. -I../../config -DNO_GSSAPI -D_FILE_OFFSET_BITS=64    -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i586 -mtune=generic -fasynchronous-unwind-tables -Wall -c -o libfzputtycommon_a-sshsha.o `test -f 'sshsha.c' || echo './'`sshsha.c
In file included from /usr/lib/gcc/i586-mageia-linux/12/include/immintrin.h:98,
                 from sshsha.c:345:
/usr/lib/gcc/i586-mageia-linux/12/include/avx512fp16intrin.h:38:9: error: '_Float16' is not supported on this target
   38 | typedef _Float16 __v8hf __attribute__ ((__vector_size__ (16)));
      |         ^~~~~~~~

Here is the full log file: ​https://pkgsubmit.mageia.org/uploads/failure/cauldron/core/release/20220624173422.papoteur.duvel.689132/log/filezilla-3.60.1-3.mga9/build.i586.0.20220624173643.log

Please let me know if you need more information.

Thanks in advance.

Hi!

I'm desperate. I have 2 macs and in neither of them I can connect via ftp with tls. I can only connect via plain ftp (insecure). I think the problem is that when making the connection it does not ask me for the certificate. Other colleagues can connect with tls, and they DO ask to accept the certificate. Why don't you ask me for the certificate? I have tried everything, I have even formatted the computer. Have you had a similar case?

Thanks.

Estado: Conectando a 51.255.211.124:21... Estado: Conexión establecida, esperando el mensaje de bienvenida... Respuesta: 220 ProFTPD Server (ProFTPD) [51.255.211.124] Comando: AUTH TLS Respuesta: 502 AUTH TLS successful Comando: AUTH SSL Error: No se pudo leer desde el socket: ECONNRESET - Conexión reiniciada por el par Error: No se pudo conectar al servidor

The latest filezilla 3.59 hangs after detecting a timeout. It shows "Error: Connection timed out after N seconds of inactivity" and then stops responding to commands like "cancel current operation", "stop and remove all (from queue)" or never tries to redo the current operation. If I close the program it still stays in the task manager and I have to kill it with the taskkill command on windows to get rid of it. It makes working over poor connections very difficult and frustrating.

At the moment when I press Enter after editing a filename (local or remote), the client abrubtly closes. It happens only when I hit the Enter key on the NUMBER PAD. The filename did get changed to what I had typed.

FileZilla Client
----------------

Version:          3.60.2

Build information:
  Compiled for:   x86_64-pc-linux-gnu
  Compiled on:    x86_64-pc-linux-gnu
  Build date:     2022-07-22
  Compiled with:  gcc (GCC) 12.1.0
  Compiler flags: -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions         -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security         -fstack-clash-protection -fcf-protection -Wp,-D_GLIBCXX_ASSERTIONS -flto=auto -Wall -g

Linked against:
  wxWidgets:      3.2.0
  SQLite:         3.39.1
  GnuTLS:         3.7.6

Operating system:
  Name:           Linux 5.18.16-1-MANJARO x86_64
  Version:        5.18
  CPU features:   sse sse2 sse3 ssse3 sse4.1 sse4.2 avx aes pclmulqdq lm
  Settings dir:   /home/jh/.config/filezilla/

ASSERT INFO:
/usr/src/debug/wxWidgets-3.2.0/src/gtk/textentry.cpp(77): assert "m_inKeyPress" failed in EndHandlingKeyPressAndCheckIfPending().

BACKTRACE:
[1] g_closure_invoke
[2] g_signal_emit_valist
[3] g_signal_emit
[4] gtk_widget_send_focus_change
[5] g_cclosure_marshal_VOID__OBJECTv
[6] g_signal_emit_valist
[7] g_signal_emit
[8] gtk_widget_unparent
[9] g_cclosure_marshal_VOID__OBJECTv
[10] g_signal_emit_valist
[11] g_signal_emit
[12] gtk_container_remove
[13] g_object_run_dispose
[14] wxWindow::~wxWindow()
[15] wxTextCtrl::~wxTextCtrl()
[16] wxListTextCtrlWrapper::Finish(bool)
[17] wxListTextCtrlWrapper::CheckForEndEditKey(wxKeyEvent const&)
[18] wxListTextCtrlWrapper::OnChar(wxKeyEvent&)
[19] wxEvtHandler::ProcessEventIfMatchesId(wxEventTableEntryBase const&, wxEvtHandler*, wxEvent&)
[20] wxEventHashTable::HandleEvent(wxEvent&, wxEvtHandler*)
[21] wxEvtHandler::TryHereOnly(wxEvent&)
[22] wxEvtHandler::ProcessEventLocally(wxEvent&)
[23] wxEvtHandler::ProcessEvent(wxEvent&)
[24] wxEvtHandler::SafelyProcessEvent(wxEvent&)
[25] g_closure_invoke
[26] g_signal_emit_valist
[27] g_signal_emit
[28] gtk_window_propagate_key_event
[29] g_closure_invoke
[30] g_signal_emit_valist
[31] g_signal_emit
[32] gtk_main_do_event
[33] g_main_context_dispatch
[34] g_main_loop_run
[35] gtk_main
[36] wxGUIEventLoop::DoRun()
[37] wxEventLoopBase::Run()
[38] wxAppConsoleBase::MainLoop()
[39] wxEntry(int&, wchar_t**)
[40] __libc_start_main

Hi there, this is Oscar from Erth corporation of the it department in Canada, I was working in an automated way to update our filezilla client app through powershell, it looks like we have been blacklisted for accessing your domain, can you or someone whitelist us, I actually finish most of the test I was doing and should go with some additional ones before I’m done, it seems that his might be our public IP address: 173.231.121.18

Thank you Oscar

The x64 setup writes registry keys under HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node.

There are two keys:

• HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\FileZilla Client
• HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Microsoft\Windows\CurrentVersion\Uninstall\FileZilla Client

If the software is x64 it should not use the WOW6432Node key.

HKEY_LOCAL_MACHINE\SOFTWARE\FileZilla 3 will be created after the install for 'fzshellext'

Hi,

I am no longer able to install FileZilla Client via windows package manager (Winget).

I believe this is a user agent check being performed on the server from some basic testing I have done.

I am not sure which UA Winget presents.

I have created an issue on Github for the repository which also shows some basic testing I have performed: ​https://github.com/microsoft/winget-pkgs/issues/78578

If this is not able to be fixed, I can raise a PR to get FileZilla removed from the Winget repository.

Thanks,

Jamie

OSX 10.15.7, FileZilla 3.60.2 Downloaded FileZilla_3.60.2_macosx-x86.app.tar.bz2 and unzipped using WinZip. The SHA code matched. However, FileZilla.app would not open. Fixed the problem by running chmod -R 744 FileZilla.app Suggestion: set all file permissions correctly in the download file so this step is not necessary.

Also tried to update on another machine, OS 10.14.6; same thing, same fix.

Status: Waiting to retry... Status: Resolving address of ftp.expessbill.com Status: Connection attempt failed with "EAI_NONAME - Neither nodename nor servname provided, or not known". Error: Could not connect to server

MY SERVER ADMIN HAS CHECKED INTO IT AND SAYS THIS FILE IS CONNECTED TO THE SERVER WITH NO LUCK I NEED A NUMBER I CAN GIVE TO MY ADMIN SERVER SO YOU MAY WORK TOGETHER TO RESOLVE THIS ISSUE

Remote site file panel couldn't count files more then 9998. If there are more files it is shows always 9998.

Last two version are not building correctly on i386.

See attached.

Good afternoon,

I am trying to install FileZilla Pro on a newer computer. I received a message that the license count has already been maxed out; however, I realized that I did not "deactivate" the license on one of my old computers. Are you able to assist in deactivating it from a former computer of mine? The computer has since been wiped and assigned to someone else; so there isn't an ability for me to access anything FileZilla related.

The order # is: <removed>

Any assistance would be greatly appreciated!

Thank you, Mark

Hello, i am sumbitting this ticket i discovered a few years ago while browsing files on my server. i think the issue is the 20% specifically. but i havent done any specific testing. just thought i would let you know about this issue, that i am quite surprised hasnt been reported yet.

i have verfified if i remove the "%" from the folder name i have no problem entering the folder. its been a while since i was messing with is, but if i recall properly i created a folder with just "%" and that opened just fine but again probably should verify that.

It will take a few seconds to list. And it only happens in the goolge drive, all the other directories are fine. I am using the lastes version google drive.

Hello on windows 7 32 bit the client does not show files from the desktop how to solve this problem this problem exists on versions like 3.60.0 and 3.61.0

When I edit my settings and click save, I get an error about the program not being able to locate Notepad on Windows 11. I can see the options menus until I click save and then it just gives me the error.

"You have to enter a hostname" bug. Not sure if this issue occurs on Windows but I hope it gets fixed.

My acces to my website is denied with the following notifications:

Status: Adres bepalen van ftp.stolkerenergy.com Status: Verbinden met [2001:678:76c:3760::66]:21... Status: Verbinding gemaakt, welkomstbericht afwachten... Status: TLS initialiseren... Fout: GnuTLS-fout -8: A packet with illegal or unsupported version was received. Status: Verbindingspoging mislukt met "ECONNABORTED - Verbinding verbroken". Fout: Kan niet verbinden met server Status: Wachten om opnieuw te proberen.... Status: Adres bepalen van ftp.stolkerenergy.com Status: Verbinden met [2001:678:76c:3760::66]:21... Status: Verbinding gemaakt, welkomstbericht afwachten... Antwoord: 220 ProFTPD Server ready. Opdracht: AUTH TLS Antwoord: 234 Proceed with negotiation Status: TLS initialiseren... Fout: GnuTLS-fout -8: A packet with illegal or unsupported version was received. Status: Verbindingspoging mislukt met "ECONNABORTED - Verbinding verbroken". Fout: Kan niet verbinden met server

Dear fileziller developers, thanks for your work.

I have a long list of Servers in my servermanager. Next to the button servermanager there ist a little arrow to pull down the list oft servers. This list dows not fit on my screen height, so it should scroll. Acually I have to open the servermanager dialogue box to get Serverconnections after "R"... It would be great, if the pull down menu would get a scrollfunktion.

Thanks and regards Martin

CMD+A does not work for marking all files in the file list (local and server).

System infos:

FileZilla Pro

Version: 3.62.0

Build information:

Compiled for: x86_64-apple-darwin22.1.0 Compiled on: x86_64-apple-darwin22.1.0 Build date: 2022-10-28 Compiled with: Apple clang version 14.0.0 (clang-1400.0.29.102) Compiler flags: -O2 -g -Wall -Wextra -pedantic -O2 -g -Wall -Wextra -pedantic -mmacosx-version-min=10.13.0 -Werror=partial-availability

Linked against:

wxWidgets: 3.2.1 SQLite: 3.39.4 GnuTLS: 3.7.7

Operating system:

Name: macOS Ventura Version 13.0 (Build 22A380) Version: 13.0 CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 aes pclmulqdq lm

command + A to select all no longer working in Mac FileZilla Client in the latest version. Previous versions are working fine.

The number of files selected in the file list & their totals do not match up with what is shown in the directory status bar.

CMD+C to copy a file name does not work in the file list.

Since 3.62.0, the usual key combination to select all files in pane (Command/a on Mac) does not work. All files must now be selected manually rather than a quick keystroke combination to "select all" before initiating a transfer.

FileZilla Client

Version: 3.62.0

Build information:

Compiled for: x86_64-apple-darwin22.1.0 Compiled on: x86_64-apple-darwin22.1.0 Build date: 2022-10-27 Compiled with: Apple clang version 14.0.0 (clang-1400.0.29.102) Compiler flags: -O2 -g -Wall -Wextra -pedantic -O2 -g -Wall -Wextra -pedantic -mmacosx-version-min=10.13.0 -Werror=partial-availability

Linked against:

wxWidgets: 3.2.1 SQLite: 3.39.4 GnuTLS: 3.7.7

Operating system:

Name: macOS Big Sur Version 11.7.1 (Build 20G918) Version: 11.7 CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi bmi2 lm Settings dir: /Users/jthomas/.config/filezilla/

Hello everyone. No issues with filezilla regularly but whenever I start it in a different workspace on Gnome it crashes along with the display server. I'm forced to restart the user session because of this.

When I start it in the current workspace and the I move it on another one, there's nothing wrong. But the issue is always reproducible when I start in on a workspace different than the current one.

It's happening in Wayland, don't know if it's reproducible in X11. Anyway, to reproduce on Wayland go on the activity view (I have Filezilla on the dock), drag Filezilla from the dock to a different workspace (i.e. I'm on ws2 and I drag it on ws3): everything crashes.

This kind of issue only happens with Filezilla, I usually start other applications dragging them on different workspaces. Since it's happening only with Filezilla, I think it's something wrong with Filezilla rather than Gnome itself.

At the start and close of FileZilla I receive a dialogue box (attactehd) that displays an error loading queue.

I always keep the most up to date version of FileZilla running, and this pop-up is a real pain in the ass.

Nothing serious, but would be great if you caould have a look.

<Date> Info [Type] Message <30-11-2022 16:00:42> Admin UI [Error] The server appears to be behind a NAT router. Please configure the passive mode settings and forward a range of ports in your router.

The message above should not be [Error], it should be [Info] or [Notice].

Each time I close FileZilla, the app is not completely closed. Each time one more process remains in Windows Task Manager. Sometimes there are 10 or even more similar processes running in the background.

The prevents me from installing any FileZilla update. I always need to abort a number of processes before being able to update.

The first time I run FileZilla after having updated FileZilla or having rebooted the computer, an error message occurs something like «Last time FileZilla did not exit properly and needs to be cleaned up. Please try again.»

This is annoying. I hope this can be fixed. Thank you.

I have a local (inside LAN) FTP server run by Bitvise SSH client. Trying to open it, FZ seems to always request MLSD even though the server doesn't support it. What's weird, FZ doesn't request neither SYST nor FEAT command so it couldn't even know what the server can.

14:28:40	Status:	Resolving address of host.domain.local
14:28:40	Status:	Connecting to 172.***:21...
14:28:40	Status:	Connection established, waiting for welcome message...
14:28:42	Response:	220 FtpBridge ready
14:28:42	Command:	AUTH TLS
14:28:42	Response:	530 Not logged in
14:28:42	Command:	AUTH SSL
14:28:42	Response:	530 Not logged in
14:28:42	Status:	Insecure server, it does not support FTP over TLS.
14:28:42	Command:	USER anonymous
14:28:42	Response:	331 User name OK, need password
14:28:42	Command:	PASS *********************
14:28:42	Response:	230 User logged in
14:28:42	Status:	Logged in
14:28:42	Status:	Retrieving directory listing of "/"...
14:28:42	Command:	CWD /
14:28:43	Response:	250 "/" is current directory
14:28:43	Command:	PWD
14:28:43	Response:	257 "/" is current directory
14:28:43	Command:	TYPE I
14:28:43	Response:	200 Representation type set to Image
14:28:43	Command:	PASV
14:28:43	Response:	227 Entering Passive Mode (***)
14:28:43	Command:	MLSD
14:28:43	Response:	502 Command not implemented
14:28:43	Error:	Failed to retrieve directory listing

响应: 220 Microsoft FTP Service 命令: AUTH TLS 错误: 无法连接到服务器

The Internet is okay. User/pwd is okay.

I have returned to work after the Christmas break and tried to connect to my pre-saved credentials in FileZilla only to be consistently met with the errors of "Connection Timed out after 20 seconds of inactivity" and "Could not connect to the server". The port number being used is 22, and the credentials used are correct in terms of Protocol, Host, Username and Password. I have also updated to the latest version of the FileZilla software.

Olá, não estou conseguindo realizar uma conexão sftp mais. Recebo os seguintes logs de erro: 12:06:20 Traçar: Connecting to 192.0.96.181 port 22 12:06:20 Traçar: We claim version: SSH-2.0-FileZilla_3.28.0 12:06:20 Traçar: Server version: SSH-2.0-Atomic ssh-users-gw-107-R26-20 12:06:20 Traçar: Using SSH protocol version 2 12:06:20 Traçar: Doing ECDH key exchange with curve Curve25519 and hash SHA-256 12:06:20 Traçar: Server also has ecdsa-sha2-nistp256/ssh-rsa host keys, but we don't know any of them 12:06:20 Traçar: Host key fingerprint is: 12:06:20 Traçar: ssh-ed25519 256 ba:58:fd:e9:e0:70:88:2b:4b:6a:68:b1:22:c3:77:f1 9F8knmxHsFLLSu12HuHGojvBoRdEEF8Ceo6eHhFyQ50= 12:06:20 Traçar: Initialised AES-256 SDCTR client->server encryption 12:06:20 Traçar: Initialised HMAC-SHA-256 client->server MAC algorithm 12:06:20 Traçar: Initialised AES-256 SDCTR server->client encryption 12:06:20 Traçar: Initialised HMAC-SHA-256 server->client MAC algorithm 12:06:21 Traçar: Pageant is running. Requesting keys. 12:06:21 Traçar: Pageant has 0 SSH-2 keys 12:06:21 Traçar: Server unexpectedly closed network connection 12:06:21 Erro: Server unexpectedly closed network connection 12:06:21 Traçar: CSftpControlSocket::OnTerminate without error 12:06:21 Traçar: CControlSocket::DoClose(66) 12:06:21 Traçar: CControlSocket::ResetOperation(66) 12:06:21 Traçar: CSftpConnectOpData::Reset(66) in state 3 12:06:21 Erro: Não foi possível conectar ao servidor 12:06:21 Traçar: CFileZillaEnginePrivate::ResetOperation(66)

I've purchased FileZilla Pro 3.62.0 which claims to have mime type mapping ​https://filezillapro.com/docs/v3/advanced/mime-type-mapping/ The target is an SFTP location hosted by an Azure Storage Account = StorageV2 (general purpose v2) with SFTP functionality enabled

I can see that mime type for HTML file is already configured in screenshot attached, however after uploading an HTML file to destination, its file type is being set to "application/octet-stream"

As per the mime-type mapping it should have been set to "text/html"

Change language to 'Chinese Simplified (zh_CN)', and then relaunch FileZilla Client, will show an error and then rollback to default language.

Hi,

I'am the user of FileZila client. And the version installed on my computer is 3.62.2.

I click on Update my FileZila client button to be sure have the last version and on the 2023-01-29 14h56 the FileZila Client say I have the last version.

It's false since two new versions has been made availables

It seem the FileZila Client client button about verification update does not work correctly.

3.63.1 (2023-01-26) Bugfixes and minor changes:

MSW: Fixed icon sizing issue on high DPI scale factors

3.63.0 (2023-01-24) Bugfixes and minor changes:

All official FileZilla binares now link against wxWidgets 3.2.1 Fixed a potential crash when closing FileZilla macOS: Fixed tree control scroll position not following the foucsed item macOS: Fixed an issue preventing translations into some languages to be loaded

DLL Hijacking vulnerability is discovered in latest version of FileZilla Client which is 3.63.1 which allows an attacker to gain access, execute arbitrary code via crafted DLL.

Hi,

I'm running MacOS Monterey 12.6.3 with 6 displays on Mac Studio and the same OS version running on a Macbook Air M2 with only built-in display.

Starting with version 3.62.0 of the client app, as soon as you open it it goes to fullscreen mode and there is no way to get it out of fullscreen mode. The menu bar is also hidden and only becomes visible when one moves mouse cursor to the top of the screen.

When filezilla is open I can hit F3(mission control) and it clear shows that there are 2 separate spaces open: Desktop and Filezilla. The app is unusable right now for drag/drop operations from other apps.

I've tested all versions from 3.62.0 to 3.63.1 and the issue persists on both the Version 3.61.0 and earlier work without issue. I see there is a forum thread about this so I'm not the only person seeing this issue.

In the dark mode of FileZilla on MacBook, the color and text color is very hard to read in this combination.

The colors should be changed for the dark mode in FileZilla for macOS. On the screenshot, it looks like it's easy to read but in reality, when you're sitting in front of your laptop, it's not!

​https://ibb.co/DwZs4fn