Custom Query (8171 matches)

When specifying a Default remote directory (i.e pub or ./pub or /pub or ~pub) a "/" is added, rejecting the connection. Version: Filezilla 3.0.0-beta7 OS: wintel XP Pro 2002 SP1 Logs Lev.3: Response: 230 User test logged in. Status: Connected Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Retrieving directory listing... Trace: CFtpControlSocket::SendNextCommand(0) Command: CWD /pub/ Trace: CFtpControlSocket::OnReceive() Response: 550 /pub/: No such file or directory. Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::SendNextCommand(2) Trace: CFtpControlSocket::ListSend(2) Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Error: Failed to retrieve directory listing

Version: Both 3.0.0-Beta6 and Beta7 OS: WinXP, SP2

When you connect to a site, then close the application, then relaunch the application, and finally reconnect to the same site using the "R" button, FileZilla does not go back to the default local directory set for that site, as it should.

Running 3.0 b7 using passive mode. MTU=1492, both client and server are behind Linksys NATed routers(use external IP feature is great). Ports are forwarded on both ends. Client=XP Media. Client is on 3000/250 cable, server is on 600/6000 DSL/PPPoE. Server is DLink DNS323(Unix L8)

I have seen this twice. While uploading folders containing 15 to 30 - 50-150K JPGs files to the server, the remote directories disappeared and the message "not connected to any server" appeared. The up load continued and completed successfully each time. Refresh would not show directory. Had to disconnect and reconnect to see folders and files.

Sorry, I put this on the FZ 2x list by mistake. Am reposting on FZ3.0 list.

I am not sure exactly what is happening but I an a friend of my are having the following issue:

Configuration Info

We both have:

• FileZilla 3.0 b7 installed
• DLink DNS323 500GB RAID1 servers(Unix L8)on our respective networks

configured for FTP

• NATed networks behind Linksys Routers with MTU=1492
• Running Windows XP clients
• Have ports 21, 5000-5100(preferred by prior version of FileZilla, and

65500-65535(preferred by DNS 323 in PASV) forwarded on the routers

• Set FileZilla b7 to use Servers External IP
• We both are using DNS name server via DynDNS.org because our ISPs change

our IPs several times a week.

Whats Different

• My access is 250/3000 Cable with Auto IP
• His access is 600/6000 DSL using PPPoE
• My client PC uses Norton Virus and Firewall SW
• His client PC uses ATT protection for Yahoo SW
• Note: We have tried disabling firewalls and Internet Secuity Setting with

no affect on results

Issue Outlined

• My client from my network has no issues connecting with and transferring

files to and from his server either in Active or Passive Mode when using 3.0 b7 over his DSL/PPPoE based service.

• His FZ2.31 client logs on to my server from his network in Active Mode

without issues. Passive does not work because it needs servers external IP to work.

• His FZ 3.0b7 client fails both Active and Passive connections to my

server when he tries from his network. However,when he tried from his son's cable serviced network, he was able to log on and tranfer files both in Active and Passive Mode.

I am current thinking that the issue is somehow related to his PPPoE connection but why does FZ 2.31 work in Active Mode while FZ 3.0b7 fails to connect in either mode when he tries to connect to my server from his network. The trace shows that the socket closes as soon as the PASV command is issued and the disconnect then follows.

I have included the trace for Passive Mode. I do not yet have a trace for the Active Mode. I have asked my friend for it and I will add it when I get it.

Status:Resolving IP-Address for SERVER.gotdns.com Trace:ControlSocket.cpp(167): CControlSocket::ContinueConnect(011EBA10) m_pEngine=011FF008 caller=012100A8 Status:Connecting to (Servers ext IP):21... Status:Connection established, waiting for welcome message... Trace:CFtpControlSocket::OnReceive() Response:220 NAS-500GB FTP server (Version wu-2.6.2(52) Tue Jan 2 14:13:26 EST 2007) ready. Command:USER Bill Trace:CFtpControlSocket::OnReceive() Response:331 Password required for Bill. Command:PASS Trace:CFtpControlSocket::OnReceive() Response:230-Welcome to my FTP site. Trace:CFtpControlSocket::OnReceive() Response:230-Now is the time ==> Sun Apr 8 13:27:41 2007 Response: 230-The host name is NAS-500GB Response: 230-You are Bill Response: 230-There are 1 person in my site, now. Response: 230- Response: 230- Response: 230 User Bill logged in. Command: SYST Trace: CFtpControlSocket::OnReceive() Response: 215 UNIX Type: L8 Command: FEAT Trace: CFtpControlSocket::OnReceive() Response: 500 'FEAT': command not understood. Status: Connected Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Retrieving directory listing... Trace: CFtpControlSocket::SendNextCommand(0) Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/" is current directory. Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::SendNextCommand(0) Trace: CFtpControlSocket::ListSend(0) Trace: state = 1 Trace: CFtpControlSocket::SendNextCommand(0) Trace: CFtpControlSocket::TransferSend(0) Trace: state = 1 Command: TYPE I Trace: CFtpControlSocket::OnReceive() Response: 200 Type set to I. Trace: CFtpControlSocket::TransferParseResponse() Trace: code = 2 Trace: state = 1 Trace: CFtpControlSocket::TransferSend(0) Trace: state = 2 Command: PASV Trace: CControlSocket::OnClose() Error: Disconnected from server Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Error: Failed to retrieve directory listing

Hi,

the Shortcut to Desktop above the Directorytree on the Clientside is not shown.

At second at Directorytree under Vista the Tree of Users is not shown. So there is no possibility to move Files direct to Desktop.

filezilla 3.0.0-b7 - WinXPhome Toggle-button for Server-Directory-Display starts with horizontal-split and never returns to it back. After first touch it toggles only vertical Display.

filezilla 3.0.0-b7 WinXPhome The Setting of Transfer-Timeout in seconds greater than 0 up to 9999 is ignored (f.e. 3600) and out of function. The connection is always closed after some less seconds (about 5 ?), probably by the server. In last versions filezilla was sending LIST, PASV, PWD commands from time to time. Only 0 seconds seems to work.

version: 3.0.0 beta7 Edit->settings->connection When the language is Chinese(traditional), the word "active" is translated into "主動模式", this is correct. But when the language is Chinese(simplified), it is translated into "激活模式" and "活动" and "主动模式" separately. They are all "active"'s correct translations, but only "主动模式" is used for computer language.

I'm Chinese, and I'm sure of that.

by the way, what's the meaning of "<pagename>" on the right to "select page" please?

All passwords for the server(s) are in the clear in the file sitemanager.xml. In FileZilla 2.x they are encrypted.

This seems to be a high security risk!

Filezilla version 3.0.0-beta7 Operating System Windows XP SP2

The Last Modified date columns show dates in the following order day/month/year rather than the normal month/day/year.

If the new format is going to become the standard, could there be an option added in the settings window to choose which view is preferred. The month/day/year view gets my vote.

Server: Debian 4.0 x86 vsftpd 2.0.5

Client: Any Client with FileZilla 3.0.0-beta7

After uploading a file to the Server whith ftpes (auth tls) encryption enabled the file gets corrupt (md5sum differs). Tried This with the Linux and Windows version of filezilla. Download is no problem. Windows + FileZilla-2.2.32 is also working.

client:~$ dd if=/dev/urandom of=testfile bs=1M count=1 1+0 records in 1+0 records out 1048576 bytes (1.0 MB) copied, 0.547827 seconds, 1.9 MB/s client:~$ md5sum testfile 288c79214028a34fa04b5c04c8c2948c testfile

server:/home/ftp# md5sum testfile 664df4ef310fbdb47617c8933826f64d testfile

Every retransfer of the file results in a different md5sum.

Filezilla logfile is attached .

BETA8: Download does not refresh the file list after completion (upload does!). BTW: I miss the view/editor feature from version 2, without that feature Filezilla is nearly useless for me.

Trying to run FileZilla 3 beta 8 on NT4 causes "Entry point SHGetFolderPathW not found in Shell32.dll". This entry point is in the Win2k Shell32.dll but not in the NT4 and Win98 versions of the DLL.

Thanks,

Steven

On Ubuntu 2.6.20-15-Generic, right clicking on the site manager in Filezilla 3.0.0-Beta8 doesn't open the popup with quicklinks as mentioned in the release notes.

In ~/.filezilla/sitemanager.xml the password for a non-anonymous ftp site will be stored unencrypted.

OS: 2.6.19-gentoo-r5

Ubuntu 7.04 with filezilla 3 beta 8.

Some weird overwrite problem.

I upload a folder with files. Then I rename the remote folder to something else. Then I upload again the same folder. FileZilla ask me if I want to overwrite each files one by one. Even if I cancel and delete all in the queue, refresh the remote listing and upload again, he will still ask me to overwrite or not. The only exit is to close FZ and run it again.

Here is what the logs are saying.

LOGS :

Commande STOR Bailaproductions.com.JPG Réponse: 150 Accepted data connection Réponse: 226-ASCII Réponse: 226-Options: -a -l Réponse: 226 3 matches total Réponse: 553-Can't open that file: No such file or directory Réponse: 553 Rename/move failure: No such file or directory Réponse: 150 Accepted data connection Réponse: 226-ASCII Réponse: 226-Sorry, we were unable to read . Réponse: 226-Options: -a -l Réponse: 226 0 matches total Commande TYPE I Statut: Débute le téléversement de /home/aracine/multimedia/photos originales/irfanview-temporaire/Belinda and Guesley.JPG Commande TYPE I Statut: Liste du répertoire complétée Réponse: 200 TYPE is now 8-bit binary Commande PASV Réponse: 200 TYPE is now 8-bit binary Commande PASV Réponse: 227 Entering Passive Mode (70,85,236,34,121,239) Commande STOR Belinda and Guesley.JPG Réponse: 227 Entering Passive Mode (70,85,236,34,52,79) Commande STOR bailaproductions dance troupe.JPG Réponse: 553-Can't open that file: No such file or directory Réponse: 553 Rename/move failure: No such file or directory Réponse: 553-Can't open that file: No such file or directory Réponse: 553 Rename/move failure: No such file or directory Statut: Débute le téléversement de /home/aracine/multimedia/photos originales/irfanview-temporaire/Belinda and Guesley.JPG Statut: Extraction de la liste du répertoire... Commande TYPE I Statut: Débute le téléversement de /home/aracine/multimedia/photos originales/irfanview-temporaire/bailaproductions dance troupe.JPG Statut: Extraction de la liste du répertoire... Commande SIZE Belinda and Guesley.JPG Commande TYPE I Réponse: 200 TYPE is now 8-bit binary Réponse: 550 Can't check for file existence Commande MDTM Belinda and Guesley.JPG Réponse: 200 TYPE is now 8-bit binary Commande PASV Réponse: 550 Can't check for file existence Réponse: 227 Entering Passive Mode (70,85,236,34,63,132)

[etc]

Do you want the logs level 3 ? I can reproduce this.

I'm using beta 8 and nightly builds from FileZilla 3 under Ubuntu (GNU/Linux), and I've noticed a bug : I'm unable to download files containing the "&" character. I've been told to report this bug in the bugtracker by codesquid.

FileZilla creates a file without the "&" sign and then ask infinitely whether it should replace it and never downloads the file. Actually, the RETR command contains the filename without the "&", and thus the server responds "550 Failed to open file".

A file without the "&" character gets created and the replace dialog would show up over and over asking for replacing this empty file.

Attached is the log of the FTP session.

When connecting to ftp.sunet.se and going into, for example: /pub/Linux/distributions/ubuntu/ubuntu-cd/feisty/

I get a list of .iso-files listed as directories by FZ. Because of this I cannot download them since it tries to cd into the files. I've attached a log file containing the output from a refresh. It seems to misunderstand the symlinks. Using 3.0b8 on WinXP SP2.

-Using filezilla 3.0.0-beta8 on linux (seems to happen on Windows too -> ​http://filezilla.sourceforge.net/forum/viewtopic.php?t=3433 - When transfering lots of file, the CPU load drops to 100% after a short time. It seems to be due to the log of commands/response displayed while files being uploaded. If you right-clic -> clear all, the CPU Load comes back to a normal level. Confirmations?

When you set the three fields at "Concurrent transfers" all to 1, I would expect it to work the same way as it did in FZ2: reusing the current connection for a transfer and not opening a new connection.

The FTP connection to my webhoster is slow on connecting, once connected it all works as fast as you would expect. Therefore reconnecting for every transfer is annoying.

Using beta-8 on WinXP.

Version: 3.0.0-beta8 OS: Windows XP Professional SP2 (Traditional Chinese Version) Installation: default

Description: On the first run, I found that "Chinese" was set as default language. That worked okay. First thing I did was check the quick connect history list, to see if it was still there. Turns out my previous installation was in a different folder, so the list was empty. Then I attempted to change the language. I selected "English", clicked "OK", and it crashed.

Further testing reveals that it only crashes when I click the quickconnect history list first, then attempt a language change, regardless of the original or desired language. Changing the language immediately following a fresh startup of the program does not result in a crash, and the language transition goes smoothly.

After the crash, restarting the program shows that the language change did take effect.

Ubuntu 7.04, FZ beta 9.

With beta 8, transfert of files was working.

I beging to upload something, the folder is created and then FZ hang.

OS: Ubuntu 6.10 (Edgy Eft) Filezilla: 3.0.0-beta 10

My first bug report, so let me know if the information is insufficient.

I encounter problems when trying to refresh the directories on a server - but find it hard to reproduce the behavior.

I deleted a file with Filezilla. I then load a webpage with a PHP-Script that creates this file from scratch if it doesn't already exist. When I then try to refresh the directory in FileZilla (where it still shows "empty"), I get a timeout and the conncetion to the server is reset.

I have attached the log.

Thanks for your work, so excited that now I can finally use my favorite FTP-Client on my favorite Operating System.

When renaming a local file (in the left panel) through the GUI, the name of the file changes as it should, but that change is not reflected in the GUI.

(Should the category have been "interface" for this bug?)

The Swedish translation uses the wrong locale name (sv_SE). There is absolutely no meaning in using both language and country code. If just using language code (sv) other users with different locale can also enjoy this translation (such as sv_FI)

Please change the name from "sv_SE" to "sv"

FileZilla betas cannot be run from a directory containing the "#" character in its name (eg. c:\#filezilla). It runs fine when I run it from c:\filezilla.

Steps to reproduce: Copy FileZilla 3.0.0 beta 10 (or any earlier) to c:\#filezilla and run filezilla.exe

Log: 17:37:18: XML parsing error: 'no element found' at line 1 17:37:18: Cannot load resources from file 'file:/C%3A/AUTOEXEC.BAT'. 17:37:18: XML parsing error: 'no element found' at line 1 17:37:18: Cannot load resources from file 'file:/C%3A/CONFIG.SYS'. 17:37:18: XML parsing error: 'not well-formed (invalid token)' at line 1 17:37:18: Cannot load resources from file 'file:/C%3A/log.txt'. 17:37:18: XML parsing error: 'no element found' at line 1 17:37:18: Cannot load resources from file 'file:/C%3A/AUTOEXEC.BAT'. 17:37:18: XML parsing error: 'no element found' at line 1 17:37:18: Cannot load resources from file 'file:/C%3A/CONFIG.SYS'. 17:37:18: XML parsing error: 'not well-formed (invalid token)' at line 1 17:37:18: Cannot load resources from file 'file:/C%3A/log.txt'. 17:37:18: XRC resource 'ID_MENUBAR' (class 'wxMenuBar') not found! 17:37:18: Cannot load main menu from resource file 17:37:18: XML parsing error: 'no element found' at line 1 17:37:18: Cannot load resources from file 'file:/C%3A/AUTOEXEC.BAT'. 17:37:18: XML parsing error: 'no element found' at line 1 17:37:18: Cannot load resources from file 'file:/C%3A/CONFIG.SYS'. 17:37:18: XML parsing error: 'not well-formed (invalid token)' at line 1 17:37:18: Cannot load resources from file 'file:/C%3A/log.txt'. 17:37:18: XRC resource 'ID_MENU_DEBUG' (class 'wxMenu') not found! 17:37:18: XML parsing error: 'no element found' at line 1 17:37:18: Cannot load resources from file 'file:/C%3A/AUTOEXEC.BAT'. 17:37:18: XML parsing error: 'no element found' at line 1 17:37:18: Cannot load resources from file 'file:/C%3A/CONFIG.SYS'. 17:37:18: XML parsing error: 'not well-formed (invalid token)' at line 1 17:37:18: Cannot load resources from file 'file:/C%3A/log.txt'. 17:37:18: XRC resource 'ID_TOOLBAR' (class 'wxToolBar') not found! 17:37:18: Cannot load toolbar from resource file 17:37:18: XML parsing error: 'no element found' at line 1 17:37:18: Cannot load resources from file 'file:/C%3A/AUTOEXEC.BAT'. 17:37:18: XML parsing error: 'no element found' at line 1 17:37:18: Cannot load resources from file 'file:/C%3A/CONFIG.SYS'. 17:37:18: XML parsing error: 'not well-formed (invalid token)' at line 1 17:37:18: Cannot load resources from file 'file:/C%3A/log.txt'. 17:37:18: XRC resource 'ID_QUICKCONNECTBAR' (class 'wxPanel') not found! 17:37:18: Cannot load Quickconnect bar from resource file

I believe the problems in viewing a file beginning with a period have been reported elsewhere. I couldn't find these reports, but I remember seeing them, so pardon me if this is a dup.

If I try to delete a remote directory containing a file whose name starts with a period (.htaccess, in this case), the directory is not deleted and it displays as being empty.

The FTP server is ProFTPD 1.3.0a Server (ProFTPD) and appears to be able to list files that start with a period (if I use the plain old FTP command and then do ls -a.

FileZilla version is 3.0.0-beta10 running on Windows XP.

(might be related to wxWidgets, but I'm unsure so I'm reporting it here)

When reordering either the local or remote file list, if files were selected, since the order changes, files taking the position of files previously selected are now selected.

It looks like it's a problem with the ID the file gets in the list, which isn't updated properly: the IDs of selected files isn't update at all, only files are being reordered.

Expected behaviour is to have selection updates with file reorder, and having the same files selected, no matter I'm reordering the list.

FileZilla 3 beta 10 takes a very long time to start up if you have disconnected network drives in Windows.

Recreate problem: tools / map network drive choose another computer in the network
computer\c$ or whatever save the connection with "reconnect at logon" FileZilla still starts up fine remove the other computer from the network (unplug network cable) FileZilla now takes ~30 sec to start.

Related to [ 1578753 ] Scan Floppy and slow startup ​http://sourceforge.net/tracker/index.php?func=detail&aid=1578753&group_id=21558&atid=887596

This is a problem with the Win32 3.0.0-beta10 client and a Unix ftp server.

If you select a remote file and use the File Attributes entry from the right-click menu to change the remote file permissions, the permissions do get properly changed; but the file list shows the old permissions. If you right click and select File Attributes again, the original (now incorrect) permissions are shown in the dialog box.

Switching to a different directory and then switching back causes a refresh of the file list and then the correct permissions are displayed.

Local files do not update once download is completed, I have to change directories and then return in order to see the files that I have downloaded.

Filezilla Ver. 3.0.0-beta10 (win32 exe version)

Windows Vista home premium

Hey, it's me again. Using the last compiled nightly build, when a server refuses a connection for a transfer because I have "already too much connection", FileZilla puts the file in the failed transfer queue with a message saying "wrong password". The error code returned by the server happens just after FileZilla sent the password, and its return code is 530.

After looking a bit in the RFC, 530 is described as "refused connection" rather than "wrong password", but I'm unsure you could do something about it, since the error code has many meaning. But at least you know that it might mean something else, now.

If a file transfer aborted and later resumed, there will be a dialog asking what I want to do with the existing file (renaming, replacing, resuming, etc.).

However, if the path and/or filename is too long, the dialog gets very wide and because FZ3 puts the box to a specific position, the right part of the box won't be displayed and you have to move the dialog to the left, so that you can choose from the options.

Problem:

Windows Filezilla installs the Start menu shortcut in the start menu of the user that installed the program.

Software version: Windows XP SP2, filezilla 2.2.32.

Expected Results:

Filezilla installs start menu shortcut in all users start menu so all accounts have access to it.

Additional Info:

Same goes for Windows 2000 and 2003 and builds I have tried of filezilla IIRC.

When I transfer a large directory with thousands of files, I inevitably get a handful of zero-length files scattered throughout. My current workaround is to use the command-line FTP client (I'm on Windows XP) to "ls -lR" the entire site, then grep the results for zero-sized files, and upload those individually.

I would like to see an option in FileZilla to verify the size of each file after uploading, and retry the transfer on disagreement between the local and server versions.

FileZilla 3.0.0-beta10 regression

port box not getting port numbers, at least not showing up

I am trying to update to FileZilla 3.0.0-beta10 to get the fix for broken connections forgetting the "Resume" choice.

But, after unzipping the windows zip for it, and running it, and adding a new host, and selecting SFTP, I discover what looks like an error in the port box.

The port box doesn't get the correct number -- this works correctly in FileZilla 2.2.30(a?) -- when you select SFTP protocol, the port box is automatically set to 22.

But, with FileZilla 3.0.0-beta10, the port box seems to stay blank.

I am using Filezilla Client 3.0 BETA 10, and the set priority option in the queue does not work. All files that are downloaded are set to normal priority and can not be changed.

Not sure if this is a bug, but reporting just in case. I've seen this in all Betas so far.

Under Gnome 2.18.1 / Ubuntu feisty standard install, the Settings dialog shows "<pagename>" at the top, for all "pages", for example Connection, Interface, Debug, etc.

I wonder if this is a problem with ubuntu's gnome or just still work in progress.

Typo in the dialog that comes up when you import an older filezilla.xml file. "Due to the differences in the storage formt," Format needs an o. I'm using beta 11

In local and remote does not save tab positions - version beta 11

In FileZilla 2 the ftp user's password was encrypted, for example Pass="010006086069122079112100". In FileZilla 3 (3.0.0-beta11) the sitemanager.xml file in C:\Documents and Settings\<username>\Application Data\FileZilla contains the ftp user's password in plain text, for example <Pass>mysecretpassword</Pass>.

I think it is obvious why this is so bad. I could not find this logged as a bug anywhere and so have raised this to make sure it is addressed.

It's a really minor thing, the button which toogles the display for the transfer queue is dead. I'm using 3.0.0b11 as Zip-Version (Win32).

Program: FileZilla 3 beta 11 OS: Windows XP Professional SP2

Problem: FileZilla has a strange behavior when I try to upload my files to my 110mb.com FTP account.

Let's reproduce the problem step-by-step. I establish a connection to the FTP server and I try to upload a file.

Here is the log:

Status: Resolving IP-Address for kaixi.110mb.com Trace: ControlSocket.cpp(948): CRealControlSocket::ContinueConnect(013475B8) m_pEngine=01089CD0 caller=01330488 Status: Connecting to 195.242.99.215:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 41 of 50 allowed. Response: 220-Local time is now 15:50. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 60 seconds of inactivity. Command: USER kaixi Trace: CFtpControlSocket::OnReceive() Response: 331 User kaixi OK. Password required Command: PASS Trace: CFtpControlSocket::OnReceive() Response: 230-User kaixi has group access to: vhosts Response: 230-OK. Current restricted directory is / Response: 230 289 Kbytes used (0%) - authorized: 2048000 Kb Status: Connected Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Retrieving directory listing... Trace: CFtpControlSocket::SendNextCommand(0) Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/" is your current location Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::SendNextCommand(0) Trace: CFtpControlSocket::ListSend(0) Trace: CFtpControlSocket::SendNextCommand(0) Trace: CFtpControlSocket::TransferSend(0) Command: TYPE I Trace: CFtpControlSocket::OnReceive() Response: 200 TYPE is now 8-bit binary Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::TransferSend(0) Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (195,242,99,215,237,57) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::TransferSend(0) Command: LIST -a Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Accepted data connection Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::TransferSend(0) Trace: CTransferSocket::OnClose Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226-ASCII Response: 226-Options: -a -l Response: 226 11 matches total Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::SendNextCommand(0) Trace: CFtpControlSocket::ListSend(0) Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Resolving IP-Address for kaixi.110mb.com Trace: ControlSocket.cpp(948): CRealControlSocket::ContinueConnect(01347308) m_pEngine=01320268 caller=01352F30 Status: Connecting to 195.242.99.215:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 421 Too many connections (1) from this IP Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Error: Could not connect to server Status: Waiting to retry... Status: Resolving IP-Address for kaixi.110mb.com Trace: ControlSocket.cpp(948): CRealControlSocket::ContinueConnect(01347578) m_pEngine=01320268 caller=01352F30 Status: Connecting to 195.242.99.215:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 421 Too many connections (1) from this IP Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Error: Could not connect to server Status: Waiting to retry... Status: Resolving IP-Address for kaixi.110mb.com Trace: ControlSocket.cpp(948): CRealControlSocket::ContinueConnect(01347308) m_pEngine=01320268 caller=01352F30 Status: Connecting to 195.242.99.215:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 421 Too many connections (1) from this IP Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Error: Could not connect to server Status: Resolving IP-Address for kaixi.110mb.com Trace: ControlSocket.cpp(948): CRealControlSocket::ContinueConnect(01347308) m_pEngine=01320268 caller=01352F30 Status: Connecting to 195.242.99.215:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 421 Too many connections (1) from this IP Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Error: Could not connect to server Status: Waiting to retry... Status: Resolving IP-Address for kaixi.110mb.com Trace: ControlSocket.cpp(948): CRealControlSocket::ContinueConnect(0134FD80) m_pEngine=01320268 caller=01352F30 Status: Connecting to 195.242.99.215:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 421 Too many connections (1) from this IP Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Error: Could not connect to server Status: Waiting to retry...

There is absolutely no way to upload files. I've tried everything: only one file upload every time, I've set the simultaneous uploads to 1... After my unsuccessful tries I finally decide to give up. OK, I disconnect from the server.

The strange part comes...

Now look at the log:

Status: Disconnected from server Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Status: Resolving IP-Address for kaixi.110mb.com Trace: ControlSocket.cpp(948): CRealControlSocket::ContinueConnect(013479F8) m_pEngine=01320268 caller=01330488 Status: Connecting to 195.242.99.215:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 40 of 50 allowed. Response: 220-Local time is now 15:59. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 60 seconds of inactivity. Command: USER kaixi Trace: CFtpControlSocket::OnReceive() Response: 331 User kaixi OK. Password required Command: PASS Trace: CFtpControlSocket::OnReceive() Response: 230-User kaixi has group access to: vhosts Response: 230-OK. Current restricted directory is / Response: 230 289 Kbytes used (0%) - authorized: 2048000 Kb Status: Connected Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::FileTransfer() Status: Starting upload of C:\Documents and Settings\Ningsu\Escritorio\Web\index.html Trace: CFtpControlSocket::SendNextCommand(0) Command: CWD / Trace: CFtpControlSocket::OnReceive() Response: 250 OK. Current directory is / Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/" is your current location Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::SendNextCommand(0) Trace: FileTransferSend() Trace: CFtpControlSocket::SendNextCommand(0) Trace: CFtpControlSocket::TransferSend(0) Command: TYPE A Trace: CFtpControlSocket::OnReceive() Response: 200 TYPE is now ASCII Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::TransferSend(0) Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (195,242,99,215,195,99) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::TransferSend(0) Command: STOR index.html Trace: CTransferSocket::OnConnect Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 150 Accepted data connection Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::TransferSend(0) Trace: CFtpControlSocket::OnReceive() Response: 226-292 Kbytes used (0%) - authorized: 2048000 Kb Response: 226-File successfully transferred Response: 226 0.146 seconds (measured here), 22.17 Kbytes per second Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::SendNextCommand(0) Trace: FileTransferSend() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: File transfer successful Status: Disconnected from server Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66)

Now that I was supposed to be disconnected the file starts to upload to the server. It's amazing!!

Can you please please tell me what's happening here? Many users from 110mb who use FileZilla 3 are experiencing this problem. See this forum post:

​http://www.110mb.com/forum/empty-t17936.0.html

In my opinion, I think this is a bug of Filezilla 3 beacause everything is fine with Filezilla 2.

Take a look to this, please. Could you send me a reply to kaixiluo at gmail dot com? Thanks a lot.

Yours sincerely,

Kaixi

When I enter "300" for "Delay between failed login attempts" in the settings dialog, and click "OK", I get an error box informing me that I should enter a number between 0 and 999 seconds, which 300 clearly is. (I then tried 99 seconds and it was accepted). I made sure that I hadn't entered any erroneous characters like a space.

I suspect there are other places, but specifically, if transfers (downloads in my case) are in progress (and IIRC also when just queued) and right-click to change priority (Higher or Lower), it requires the user to re-click on one of the queue entry rows to see the changed setting of priority. Otherwise, poor user sits there thinking no change has been noted (and maybe it hasn't as I couldn't readily perceive dynamic rate changes differing from normal fluctuations and adjustments)

Running XP sp2

This is a follow on from my Help forum entries with an upload of debug log and contrasting log from FZ2 which seems to always work. I'm still worried that the same problem occurs when remote server is WinFTPserver or FZ 9.2.23 and also if the client is FireFTP.

In the attached logs ip addresses and file names are genuine originals, but I also tested with a simpler file name yesterday as described in Help Forum entry.

The odd thing is that some resumes work but those that don't resume successfully appear to NEVER resume successfully with FZ3b11 but vdo resume with FZ2.2.32

I have reverted to FZ2 for now.

...oh, and its XPsp2 on this (laptop) PC and same problem on another clinet PC I started this exercise on a few days back.

p.s. NAT at client-end router maps ports 20 and 21, and that stuff about allowing a bunch of ports to be exploited (limit local ports) didn't seem very manageable when it came to NATting. I didn't set any this time but could get away with a few if required. I did try NATting a couple of local ports extra when I first hit problems on the PC I used at the weekend and that didn't fix the problem.

p.p.s. I have transfer compression on

on beta 11, I try to download a directory by dragging over. it has 7 files in it. one of them (a random file) most often becomes zero-length, though I get success from the process. it also does something else strange.

I do not have this problem with FZ2. and it is not the server or my connection.

fz3 also does something else strange. even though the local dir was previously empty, on the last file it asks me if I want to overwrite: I have noticed fz3 creates a zero-length file first, and then asks permission if it's ok to overwrite. I tell it yes, and then the file of proper length is downloaded.

When IMPORTING Site Manager data from an XML, the passwords that contain an & (ampersand) loose the &. Escaping them also doesn't help. When using the Quick Connect, the & is treated correctly.

(FileZilla_3.0.0-beta11_win32 on WinXP -- no log file to add but this is easy to test & replicate)

"RemoteListView.cpp", line 262: Warning: extra ";" ignored. "RemoteListView.cpp", line 1020: Error: Incorrect access of a member from const-qualified function. "RemoteListView.cpp", line 1057: Error: Incorrect access of a member from const-qualified function. "RemoteListView.cpp", line 1059: Error: Incorrect access of a member from const-qualified function. "RemoteListView.cpp", line 1061: Error: Incorrect access of a member from const-qualified function. "RemoteListView.cpp", line 1063: Error: Incorrect access of a member from const-qualified function. "RemoteListView.cpp", line 1065: Error: Incorrect access of a member from const-qualified function. "RemoteListView.cpp", line 1068: Error: Incorrect access of a member from const-qualified function. 7 Error(s) and 13 Warning(s) detected. make[3]: * [filezilla-RemoteListView.o] Error 7

"prefix.cpp", line 379: Error: Cannot assign const char* to char*. "prefix.cpp", line 415: Error: Cannot assign const char* to char*. 2 Error(s) and 3 Warning(s) detected.

$./autogen.sh -e --- FileZilla 3 autogen script ---

-e HINT: If this script fails, please download a recent source tarball from ​http://filezilla-project.org/nightly.php

-n 1. Cleaning previous files... done

2. Checking required tools...

-n 2.1 ./autogen.sh: local: not found -n Checking for automake >= 1.8.0 ... found 1.10, ok. -n 2.2 ./autogen.sh: local: not found ./autogen.sh: test: argument expected

On solaris,

/ws/onnv-tools-prc/SUNWspro/SS11/bin/cc -g -o fzsftp fzsftp-ssh.o fzsftp-sshcrc.o fzsftp-sshdes.o fzsftp-sshmd5.o fzsftp-sshrsa.o fzsftp-sshrand.o fzsftp-sshsha.o fzsftp-sshblowf.o fzsftp-sshdh.o fzsftp-sshcrcda.o fzsftp-sshpubk.o fzsftp-sshzlib.o fzsftp-sshdss.o fzsftp-x11fwd.o fzsftp-portfwd.o fzsftp-sshaes.o fzsftp-sshsh256.o fzsftp-sshsh512.o fzsftp-sshbn.o fzsftp-wildcard.o fzsftp-pinger.o fzsftp-ssharcf.o fzsftp-sftp.o fzsftp-int64.o fzsftp-logging.o fzsftp-be_none.o fzsftp-cproxy.o fzsftp-psftp.o fzsftp-cmdline.o fzsftp-timing.o fzsftp-misc.o fzsftp-version.o fzsftp-settings.o fzsftp-tree234.o fzsftp-proxy.o fzsftp-fzsftp.o fzsftp-time.o unix/libfzsftp_ux.a -lxnet Undefined first referenced

symbol in file

in6addr_loopback unix/libfzsftp_ux.a(uxnet.o) in6addr_any unix/libfzsftp_ux.a(uxnet.o) ld: fatal: Symbol referencing errors. No output written to fzsftp

build from trunk, there would be lots of po errors like following:

Processing file "tr.po.new"... Lines 1138, 1139 (tr.po.new): incompatible printf-format.

format specifier mismatch in the argument (#1).

Lines 1138, 1139 (tr.po.new): incompatible printf-format.

format specifier mismatch in the argument (#2).

ERROR: 2 error(s) found. make[1]: * [tr.mo] Error 1

Using FileZilla 3 beta 11 and FileZilla 2.2.32 (WinXP to Linux server, FTPES, passive mode, ASCII/auto and binary):

-- It appears that the upload of empty files and empty directory structures causes problems, i. e. the items appear in the failure queue, although some of them were created.

-- FileZilla tries to transfer some null-byte files multiple and asks if the target (which was obviously created) shall be overwritten. Looping until timeout failure, see end of log.

-- FileZilla interprets the server message "530 too many connections" as "wrong password" and thus puts items to the failure queue instead of trying to repeat the transaction later.

To be tested with the files of egroupware.org (lots of empty dirs and files in the directories egw/gallery and egw/phpsysinfo).

After connecting to an IIS FTP server, files of +2 GB do not dosplay the file size.

The attached screen print is after disconnecting and reconnecting and even doing a refresh. Note that the files to the right are missing the file sizes in the display.

using TLS connect to a site using unknown certificate, when click 'Always trust certificate in future sessions', it only work for current instance of FileZilla3. After close FileZilla3, next time, it will ask again.

On Vista Ultimate, when starting and shutting down FileZilla 3.0.0-rc1 following message is displayed:

"Could not load 'C:\Users\USERNAME\AppData\Roaming\FileZilla\queue.xml', please make sure the file is valid and can be accessed. The queue will not be saved."

Also, see attached file.

Uninstalling and installing FileZilla does not solve the problem.

The path and file queue.xml are existing.

After FileZilla installation, queue.xml is 0 bytes - no entries in the file.

Removing queue.xml and restarting FileZilla solves the problem. New queue.xml is created with following content:

<?xml version="1.0" encoding="UTF-8" standalone="yes" ?> <FileZilla3 />

It is possible that queue.xml deployed with the FileZilla setup is empty instead of the expected? xml declaration line (see above).

The same error also occurred on following Beta builds:

3.0.0-beta6_win32 3.0.0-beta7_win32 3.0.0-beta8_win32 3.0.0-beta9_win32 3.0.0-beta10_win32 3.0.0-beta11_win32

v3.0.0-rc1

When I multi-select files from a remote server, then right-mouse/download, when all files have been completed, the files SELECTED in the list CHANGES.

Additionally, I get a "do you want to replace file 'A' with file 'A' " message, when there originally was no file A. FileZilla seems to be copying it partially, then trys to re-copy it; when doing so, it sees the partial copy, then asks to 'overwrite?' it.

The View/Edit selection is missing from the popup window when a file is right clicked.

Limit number of simultaneous connections (set to 1) nullified any transfer from local to remote. Files and folders would just hang in Queue infinitum, with status "connecting".

Ver. 3.0.0 RC1 OS: Windows Vista x64 Host/Remote Server: Godaddy / LAMP

Solution: Tried un-setting "Limit number of.." without resolve.

Upgraded to nightly build, and tried un-checking "Limit number of..", again, with success.

Scroll wheel on mouse causes FileZilla to fail and close during session. Probably due to side-to-side motion rather than up and down scrolling.

Mac OSX 10.4.10 dual processor intel dual core chipset Mac Pro

FileZilla 3.0.0-rc1 Build 5250

Its currently not possible to translate files with ä,ö,ü,... in their names (yes, I did NOT choose those names....).

"Ãœbertragung konnte nicht gestartet werden"

Befehl: RETR 07-08-15 - SCI FI - Raumschiff Enterprise - Das nächste Jahrhundert - Andere Sterne_ andere Sitten.eit Antwort: 550 Failed to open file. Fehler: Kritischer Fehler

Anything else you need?

Using Filezilla 3.0.0.RC2 under feisty.

This release comes with Blukis icon set, in all three sizes.

Selecting in Settings > Interface > Themes: Blukis, changes the Icon Set, but there is no intuitive way to change the interface icon sizes.

Tried selecting "Large icons" in the Preview, the clicking OK, but that did not help.

Missing "icon set size" combo-box perhaps?

Thanks!

For some reason a few of the Blukis icons look visibly jagged in my nowadays common display size (1280 x 1024)

The same icons loaded in SVG format (as posted in Filezilla forums) in Inkscape and then displayed at the same icon size/resolution (32 x 32, 64 x 64) look awesome, so this seems to be easily fixable.

This is specially evident in the icons containing the refresh circle, upload and download arrows, and the little earth.

Thanks!

In Filezilla 2 it was possible to navigate a remote ftp-server with the keyboard. When pressing a key, Filezilla navigated to the first file starting with that letter. This also worked with multiple files with the same first letter, in that case you could cycle between those files.

It seems this functionality is gone in Filezilla 3 rc2.

Test case:

1. Connect to any FTP-server.
2. Open a directory with 2 or more files
3. Press the first letter key of some of the files/subdirectories in the current directie

Expected: Filezilla would navigate to the file with the corresponding first letter

Seen: Nothing happens

Version: 3.0.0 rc2, 2007-08-26

Hi,

After updating to RC2 of FileZilla 3 Client it will no longer connect when using SSH authentication. Connecting with the same key from the same computer with FileZilla 2 works OK, as did the previous release of FileZilla 3

Here is the connection log:

Status: Connecting to vytautas.mine.nu:22... Response: fzSftp started Trace: CSftpControlSocket::ConnectParseResponse(fzSftp started) Command: open "ftpweb@…" 22 Trace: Looking up host "vytautas.mine.nu" Trace: Connecting to 192.168.1.100 port 22 Trace: Server version: SSH-2.0-OpenSSH_4.5 Trace: Using SSH protocol version 2 Trace: We claim version: SSH-2.0-PuTTY_Local:_Aug_26_2007_22:50:51 Trace: Doing Diffie-Hellman group exchange Trace: Doing Diffie-Hellman key exchange with hash SHA-256 Trace: Host key fingerprint is: Trace: ssh-rsa 1024 65:16:d9:bc:18:86:c6:10:db:7b:68:27:cc:fe:a5:e2 Trace: Initialised AES-256 SDCTR client->server encryption Trace: Initialised HMAC-SHA1 client->server MAC algorithm Trace: Initialised AES-256 SDCTR server->client encryption Trace: Initialised HMAC-SHA1 server->client MAC algorithm Trace: Reading private key file "C:\Documents and Settings\User\My Documents\Keys\Linux-Server-FC4.ppk" Trace: Pageant is running. Requesting keys. Trace: Pageant has 1 SSH-2 keys Trace: Configured key file not in Pageant Trace: Offered public key Trace: Server refused public key Trace: Disconnected: No supported authentication methods available Error: Disconnected: No supported authentication methods available Trace: CSftpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Error: Could not connect to server Status: Waiting to retry...

I use the Zune-Desktop Theme from Microsoft on Windows XP, but the Toolbar of FZ3 stays on a different color (see Attachment). Maybe the color of the Toolbar is not linked to the correct windows-elment-color.

Data: FZ3 RC2 Windows XP SP2 (Zune Theme : ​http://go.microsoft.com/fwlink/?LinkID=75078)

I've just enabled file filtering with the following pattern : remove file ending with either ".php~" or ".css~" on local view

Now, with this filter enabled, every time I start uploading a file using drag and drop (the bug doesn't appear using double-clicking), I get a kind of random file selection on the local view (just when I drop the file).

Hope it's precise enough...

FileZilla 3.0.0-rc2 (official Linux build from FileZilla's SourceForge Project Page) on Ubuntu 7.04 with libwx<base|gtk> 2.8.1.1-0ubuntu4

In the queue display the rows with detail information for active downloads (time elapsed, ETA, progress bar, transfered bytes, speed) do not move when scrolling. They keep their absolute position and hide other rows, which seem to "move under" the detail rows.

Surprisingly correct behaviour can be observed when scrolling with the mouse scrollwheel or by using cursor keys when a row is in the queue table is selected. To reproduce the bug press the buttons of the scroll bar or drag its slide.

Hi,

present in 2.2.32 version, don't forget to show the info and transfert progress bar on bottom of windows very usefull ! (see image)

Good job !

Regards

Fred

after automaticaly downloading the update (3.0.0-rc3), the installation could not be started because the file c:\users\myname\documents\ etc. could not be found. Indeed, On my dutch computers I have the dutch translation for users and documents. Improvement for the programmer: ask the special folder My documents instead of composing it by yourself.

i was connected same server (different filezilla version) i can't see some directory in 3.0 beta11 version but can see 2.2.24a version i'll upload capture image (2.2.24a and 3.0 beta11).. plz check that problem thank you

Using FileZilla 3.0.0 I found out, that all data you enter concerning the servers to connect to is stored in the folder documents and settings\<username>\app data\FileZilla, especially in filezilla.xml and sitemanager.xml.

The point is: The passwords are written to these files in clear text.

In FileZilla 2 it was at least encrypted in some way.

For security-reasons: Can you change this again?

Using 1024x768 pixels the "settings"-dialog appears at the right side of the screen with some part no longer visible.

It is not possible to view the file-sizes in kilobytes or megabytes any more.

That would be very appreciated to concisely see how large the files are.

FileZilla version: 3.0.0 OS: Windows XP SP2

When importing site usernames and passwords from previous filezilla versions, sites with DontSavePass="1" should have Logontype="Ask for password" instead of "Normal" so that the new filezilla asks for password on connection like the old one.

There is no way to hide

the server-protcol at the top, the queue at the bottom and the quick-connect-bar

by default.

When changing languge of FileZilla client from estonia to russian half of application still in estonian language.

I just created a new dummy site after a fresh installation of FZ3. This is what the sitemanager.xml look like:

<?xml version="1.0" encoding="UTF-8" standalone="yes" ?> <FileZilla3>

<Servers>

<Folder>New folder

<Server>

<Host>sdr</Host> <Port>34</Port> <Protocol>0</Protocol> <Type>0</Type> <Logontype>0</Logontype> <TimezoneOffset>0</TimezoneOffset> <PasvMode>MODE_DEFAULT</PasvMode> <MaximumMultipleConnections>0</MaximumMultipleConnections> <EncodingType>Auto</EncodingType> <Comments></Comments> <LocalDir></LocalDir> <RemoteDir></RemoteDir>New site

</Server>

</Folder>

</Servers>

</FileZilla3>

As you can see, the site's name "New site" is not stored inside any tag, but loosely inside its parent "Server" tag. I'm not sure if this is valid XML. At least it would be nice to introduce a "Name" tag to encapsulate the site's name.

The same holds true for a folder's name ("New folder" in the example above).

If the user tries to upload a file to a remote directory that they don't have write access to, a dialog will pop up saying that the file in question already exists and prompting for actions in that case. Also, the file will appear in the directory listing until refreshed.

This can be very confusing if the user doesn't realise they're trying to write to a write protected folder.

Bug observed in FileZilla 3.0.0 under Windows XP.

Each time I open FileZilla, both the local and remote directory panes (at the top in standard view) get larger and larger, up to a point. If I make them smaller by moving the bar upwards, next time I open FZ they have moved down a little.

They seem to stop moving down when they have reaced about halfway (ie directory and file panes are same height).

FileZilla 3 isn't correctly accepting the command-line parameters that FileZilla 2 did.

Hi,

Good work with new interface. Please make Filezilla work like 2.X version so that if password is left blank, user will prompted with Win32 Input Box.

This can provide excellent security.

In previous versions of FileZilla, one was able to drag sites to/from folders in the File Manager. Now, you are not able to drag them at all (the dimmed icon usually shown during dragging does not even show)

When dragging a folder from the remote, to a folder inside FileZilla (default bottom left quarter-pane), the new folder just transfers and the window does not refresh or show the new folder.

Built from source on openSUSE 10.3

wxGTK 2.8.4 Glib 2.14.0 gnutls 1.6.1 GCC 4.2.1 Glibc 2.6.1

I recieve the attached crash report from "Bug Buddy"

When I use FileZilla 3.0 (and 3.0.0-rc3) to upload 30 - 45 MB files to my web server, the connection gets dropped every 10 minutes. I click on Quickconnect and the file transfer continues. I called my web hosting company and they thought FileZilla was the problem. Today I transferred a file to the same server using a different client (FTP Commander) and it worked fine. My connection was never dropped.

A tech support person at my web hosting company tested the same transfer using an old version of FileZilla (2. something) and it worked fine. I wanted to let you know.

We generate very large files, often 10-12GB, which we use Filezilla to manage. I've noticed that sometimes when I ask Filezilla to delete a file that is this large, it will frequently disconnect. When I reconnect, I see the file is in deed deleted, but I think this qualifies as a bug. If the disconnect occurs while deleting multiple files, when I reconnect, all files after the one that caused the disconnect remain. I've seen this in both FZ2 and FZ3.

When we double click on any VMS folder, we are getting the following error:

"550-Failed to set default directory to FOLDERNAME;1." "550 invalid directory"

Notice that FileZilla shows the folder with version number (which is usualy ";1"). For example, a folder called "FOLDERNAME.DIR;1" is shown "FOLDERNAME;1" when it should be "FOLDERNAME".

Client tested: FileZilla 3.0.0 for Windows. Servers tested: OpenVMS 8.3 on Itanium; OpenVMS 7.3-2 on Alpha

If server encoding is cp1251 and some file have cyrillic characters this files not showing in list.

P.S. FileZilla 3 Final for Linux

In FileZilla v2.x the FileZilla.xml had the Passwords MD5 hashed. In FileZilla 3, the XML files are stored in the %USER%/Application Data/FileZilla folder. The sitemanager.xml file stores the passwords in Plain Text and not as a MD5 Hashed value. If the SiteManager settings are exported, we find the passwords stored as plain text in the exported file. Atleast sitemanager.xml should have the passwords hashed.

Hi, with filezilla 3.0 , when i want to ftp from my pvr(KISS DP558) a file named AUX - Mar 11-09-2007 20_30_21.vob In my pc folder it appears as "30" (without extension) with a size of 0ko, and filezilla says the transfert has been successful! this problem doesnt occur with filezilla 2.2.32 with the same settings(pasv mode and ascii file "auto") best regards

if a file on the remote server is actually a symbolic link, it is displayed as a directory: the directory icon and filetype "Folder". doubleclicking on one of these remote symlinks then attempts to get a directory listing of that file and unsurprisingly fails.

however, putting functions flawlessly (the target of the symlink is updated). i haven't tested getting as far as i know.

this is filezilla 3.0.0 (binary downloaded by filezilla 3 beta's update function) on fedora core 6

<tremby@tremendo:~>$ uname -a Linux tremendo 2.6.22.4-45.fc6 #1 SMP Tue Aug 21 18:29:10 EDT 2007 i686 athlon i386 GNU/Linux

I am using Ubuntu 7.04 with filezilla 3 (official)

Ftp to any server in a folder with more then let's say 5 files.

Clic on the first file, press F2. Press the down arrow, and press F2 again. Press the down arrow, and press F2 again. Press the down arrow, and press F2 again.

Then double clic on the ".." folder to go to the parent folder. See any problems? :)

See attached files...

no interface to change OPTION_TRANSFERRETRYCOUNT

Trying to open the Desktop folder produces the message "Failed to get desktop path".

Although the path for my desktop and my documents have been altered, their locations are properly set in the registry and Filezilla can access the "my documents" folder without problems.

Filezilla should not try to get the desktop by following the %USERPROFILE%\Desktop route but it should get the path from the registry.

Reset item from failure queue to normal queue, the ErrorCount never reset.

if we not using ip address directly for server, and after we lost connection, the hostname resolve will be failure. FZ3 will try to reconnect immediately, no any delay.

I think this should have delay for OPTION_RECONNECTDELAY.

In Filezilla 3.0, There're mistakes in French translation. Two errors in Éditer > Configuration > Transferts > Délai d'attente : "Si il est impossible d'envoyer ou de recevoir des données pendant cette période, la connection sera fermée et FileZilla essaiera de se reconnecter." which should be : "S'il est impossible d'envoyer ou de recevoir des données pendant cette période, la connexion sera fermée et FileZilla essaiera de se reconnecter."

When copying several subfolders, filezilla always sows the content of these folders for a moment.

After having shown the last subfolder, one again sees the "beginning-folder" at the top (all this on on the server-side).

But the address-bar for the server still displays the name of the subfolder the last files were copied from.

This is a bit confusing.

(Opening another folder finally corrects the path displayed.)