Custom Query (8170 matches)

There seems to be a problem when I download a remote file to a local UNC path. It tells me the file already exists(even if it doesn't) and ask if i want to overwrite it. Even if I choose to do so....it downloads the file but it's never saved in the directory.

I'm on windows 2000 and I mapped a drive letter to that UNC path and the problem is solved.

I managed to put all kinds of legal stuff into the welcome message, the text length was about 400 chars and from that moment on, no clients could connect. Clients gets instantly disconnected, sometimes they receive the first line of the welcome message, but as a general rule they don't get any. Connection closed by remote host. I then deleted the welcome message, restarted the server and it works normally again.

In SETTING in ver 2.15 there is an option DEBUG MENU. There is no reference to this in the HELP file. So what does it do? I've tried in checked/unchecked modes and can find litle difference? Have I missed something?

I use winbind on an SFTP server, which uses the standard nsswitch.conf and associated libraries (so this problem is likely to be seen with NIS or similar services). If I use SFTP on a linux commandline or if I use PSFTP in DOS, I see these files. But FileZilla ignores these files. It's probably because it doesn't look up the user/group name with the standard unix utility getent (or with similar unix calls). All other unix utilities I've used do this lookup.

This appears to be a bigger issue than winbind. If a server uses NIS or something else (with settings in nsswitch.conf), this will probably fail.

I suggest, rather than reading /etc/passwd, do 'getent passwd' or a similar unix call. Same with groups. I don't know if the code does this but I assume it does based on the behavior.

/dev/idal

I've noticed a 10 times smaller upload transfer in the FileZilla client version 2.1.5.

This was observed on my local network, when uploading files from a windows xp to linux proftpd. Switched to version 2.0.2 and all works fine.

All the settings were default (no bandwidth limit set).

Bear with me, my first ever bug report for any open source project. I looked through the bugs to see if its been posted, but didnt see it, so it may have been.

Problem I found was with large directories (1000+ files). This issue probably isnt present with small directories.

After selecting a large directory of about 2000 files, 20mb total and adding it to the queue, I began my transfer. I clicked my process queue button before clicking of the directory I had selected. At that point, FileZilla recalculated my 'selected files' after every file transfer. Each recalculation took about 10 seconds (which is another bug, FileZilla's EXTREMELY slow file size calculations). After about 3 file transfers it finally crashed. The second time around I made sure to click off the files, and everything transfered fine.

Filezilla also crashes when adding large groups of files to the queue. This particular case I had to add four batches of about 500 files at a time before processing. When trying to add all 2000 at once, the program crashed immediately.

FileZilla 2.1.5

Dave V dviorean@…

While I download file from Linux server which installed proftpd with mod_tls, I find that filezilla will not disconnect the data channel after the file is completely sent out.

Moving a file from

home/dir/subdir

to

remote/dir/subdir/

works fine but when i change to remote/dir/ and home/dir/ and start uploading that already exist and i choos "overwrite" as action the remote dir changes back to remote/dir/subdir/ instead of staying in /remote/dir/

Hope that helps good work though thanks for this free piece of technology

askless@… <-- yes it is valid

on FileZilla 2.1.5, using the FTP proxy setting as : remoteID@fireID@remotehost the authentication is rejected by the firewall. Not quite sure FileZilla handles correctly the password which should be : remotePWD@firePWD looking at the status window, the password is longer than the comniation remotePWD@firePWD.

PS : the FTP proxy that we have is the FTP proxy of CheckPoint Firewall-1.

Hi. FileZilla doesnt working with Squid. IE, Mozilla, WSftp and another apps goes through Squid without problem. I tested all config combination options.

By default, FileZilla currently uses PROT P (encrypted, with checksums) for all file transfers.

Using the Server/raw FTP command, it is possible to change to PROT S (unencrypted, with checksums) successfully.

However, PROT C (unencrypted, no checksums) fails with "Out of memory" at beginning of file transfer.

Being able to use the raw PROT command is useful, until (if) FileZilla supports a GUI interface to change encryption and checksums, but PROT C doesn't work.

Hi,

I'm using 2.1.5 in windows2000, in the site manager screen, the password field is always gray out. I'm not sure if there is any option to enable this feature, anyway I didn't find it.

I like it! and I like free.

Thanks!

by jiangpet@…

OS: win XP machine: dual 1700 XP with 512 MB Ram client connection - cable modem. server connecting to - work machine with dedicated T1

While using sftp through filezilla, the speed seems to be very slow. I found that the max i got from my work machine to home is 4.4KB / s and UP 6.5 KB / s.

I thought this was a little strange, so I downloaded WinSSH and used it's sftp functionality and got 100KB /s down, and 12 KB / s up.

I have attached the settings file (I marked previous stuff as *REMOVED*)

I checked the speed limiting, and it didn't seem to be set...

It doesn't appear to be possible to refresh the remote view. This makes it quite difficult to perform certain tasks, especially when it involves administering websites that have a lot of files that are being constantly created.

Whenever I key in any Speed Limit Rule, it cannot be saved and shown on the screen.

Sometimes using the "Move down" item in the queue doesn't work. Seems to be after adding to the queue. Works later on.

Trying to run FileZilla Server on a WinXP machine, and I keep getting this error message in the interface:

FileZilla Server version 0.8.3a beta Copyright 2001 by Tim Kosse (Tim.Kosse@…) Connecting to server... Connected, waiting for authentication Protocol error: Unknown protocol identifier (0x50 0x50 0x48). Connection to server closed.

Wasn't able to get anywhere in terms of configuration. I tried starting the server and connecting to it using WS- FTP with my e-mail address and a password as the login, and get this:

WINSOCK.DLL: WinSock 2.0 WS_FTP LE 5.08 2000.01.13, Copyright © 1992-2000 Ipswitch, Inc.

• -

connecting to xxx.xxx.xxx.xxx:21 Connected to xxx.xxx.xxx.xxx port 21 220-FileZilla Server version 0.8.3 beta test release 1 220-written by Tim Kosse (Tim.Kosse@…) 220 Please visit ​http://sourceforge.net/projects/filezilla/ USER mgturland@… 331 Password required for mgturland@… PASS (hidden) 530 Login or password incorrect! ! Logon failure, so quitting

Not sure if it's a bug, but I'm not sure how to proceed. Suggestions?

In "Setting"->"Connetction"->"retry Setting",I set 60 seconds to retry,but when I conncet to a ftp site,when the site say "too many users - please try again later",then it show "Error : Unable to connect!",and retey the site right now.

When logging in to an SSL EXplicit-enabled site, after the LIST command has been sent, nothing happens, then the client times out.

This happened on Filezilla 2.1.5 when trying to connect to ProFTPD 1.2.8 and 1.2.8rc2 servers. The server certificate is accepted, but then no directory listing appears. The client times out, but the server connection stays open (until the server times it out).

Other clients (smartftp, ws_ftp, and the client from bsdftpd-ssl.sc.ru) work fine.

thanks,

With V 2.1.6, I cannot connect to a site via port 2121. System responds with "Invalid PORT Command" and "Could not retrieve directory listing".

I can connect fine to this same site via this same port using WS-FTP and SmartFTP.

When I try to drag files from the remote site to my desktop or someother location outside of FileZilla it won't let me.. if I drag from remote to local within file zilla it works great.. is there a way to allow file zilla to do this?

My father & co-workers had reported problems with Win9x (98 SE & ME) connecting to my SFTP server. I use Win2k (at home) & XP (at work) and didn't have any problems with FileZilla connecting.

I now have an Windows 98SE laptop that I'm experiencing the same problem my father & co-worker had.

Steps to reproduce the problem on Win98SE:

1) Install FileZilla 2) Choose 'secure' mode - where it doesn't keep passwords 3) Choose XML, not registry for settings. 4) Run program 5) Open site manager, add site, choosing type of SFTP using SSH2 6) Attempt a connect, entering password when prompted for it.

Results of the above:

COMMAND: CONNECT server:22, initializing SFTP connection... FzSFtp.exe did not respon, terminating connection...

which repeats over and over until the timeout/retries are reached.

I have tried v2.1.4, 2.1.5, and now 2.1.6a on this machien and they all result in the same.

I'm will to assist with the resolution of this bug as much as possible. I even have MS VC 6 on this laptop, & have installed v2.1.6a w/source

Uploading a small file works (~100 kbytes), uploading a large file (~7 Mbytes) fails with the following dump and report.

I'm using Filezilla 2.1.6, and it seems that when you set the "Overwrite if newer" option at the File Transfer screen, it doesn't work. Local files of e.g. 26-4 will just overwrite remote files of 24-4.

This is very annoying when uploading directories, as ALL files are uploaded and not only those which have been changed.

Hello, I'm using ProFTPD file server with enable TLS/SSL. Everything works fine, auth, download... but when I attempting upload it crashes down and terminates. Server is okay (other clients works). If need account on my server contact me! js@…. Thanks

While listing a remote dir containing 200000+ files (don't ask) the connection times out. The same listing from a traditional command line ftp client completes successfully

Cannot reload the file queue from file

Binary for 2.1.7 compiled with VC++ 7.1 causes an access violation in CApiLog::LogMessage when exiting FileZilla.exe. The attached .diff fixes the problem.

Restoring the window from the tray turns to restored size, not maximized size.

These leds shows moved, the red led shows partially out of screen when the window is maximized.

between desc list and the first file in progress

I don't know if this is a bug per se, but VC++ 7.1 will not compile the 2.1.7 source unless the protected modifier is commented out in DirectoryCache.h at line 62.

Just an FYI!

Thanks,

• Kirk

P.S. is there a better place to submit compile- and source-related items?

If you use "ident" as the ident it prompts you to enter a username.. this may be a feature? jae7@…

Filezilla can get the year wrong for files that have been modified within the last 6 months. The list output from my server works like the standard "ls" command in so much as a file older than 6 months has the date shown as "MMM DD YYYY" and files 6 months or newer have "MMM DD HH:MM". Files with the latter date stamp format sometimes are shown in the year 2003 and sometimes the year 2002.

Example listing:

-rw-rw-rw- 1 admin home 3344 Apr 3 2001 hmi.htm -rw-rw-rw- 1 admin home 8768 May 6 18:45 index.htm -rw-rw-rw- 1 admin home 1976 Feb 15 2002 manuals.htm -rw-r--r-- 1 admin home 21704 Jan 30 23:48 manuals.php

FileZilla showns index.htm as being in 2002 (wrong), whilst manuals.php is in 2003 (correct) hmi.htm in 2001 and manuals.htm in 2002.

I'm using FileZilla 2.1.7 and FTP over SSH2 on a Win2K pc.

On Windows 2000 the lists exported from the Queue are then not imported back. This seems to be present in version 2.1.6 and 2.1.7. It worked in version 2.1.4

The XML file is generated properly and its contents are easily browsed in IE.

i try to upload a directory from local to remote, but the programs halt, if i try to add the dir on the queue the task not appear in queue too!

Wich Winroute Filezilla server don't fonctionne in Active mode

Please send me a mail to rem.d@… when the problème is delete

Rémi

Version: 2.1.7

I use the SSL mode with explicit encryption. I noticed that files transfered with that version are truncated (a few bytes are missing). I can't confirm that this is the case with non SSL transfers (didn't try). The transfer was OK with version 2.1.6a.

Regards.

Jérôme

Some non-English charaters (ex. Chinese characters) have problem with FileZilla, while these characters are OK on UNIX systems. When I made directories with FileZilla "Create directory" command, there was no error messages about making directories, but names of those directories did not display correctly in FileZilla remote directory window (display with spaces) and consequently "cd" to those directories was not possible.

I found that the character with hexidemical code "B57B" is incompatable with FileZilla. (Remember that Chinese characters have a double-byte character system.) I suspect that the first byte "B5" is responsible for this issue.

I tried CuteFTP (4.0 and PRO) with it, both versions didn't display correct directory name but "cd" command was OK and upload/download worked well.

The local directory window of FileZilla doesn't suffer from this problem however.

The current version of filezilla's server (0.8.3a) does not list files after receiving the command LIST. It even doesn't recognize the command. Just add LIST as alias for DIR or LS and everything works.

(The concerning directories are home directories with every right set.)

This has been reported at least twice before (tickets 614075, 580087), but as of the current version v2.1.7, FileZilla is still incapable of using ASCII mode for SFTP transfers. I am attempting to transfer Perl scripts but cannot use FileZilla because of this problem.

I want to use FileZilla because my current FTP client, WS_FTP LE, doesn't support SFTP; my server is being changed to SFTP only soon. Regardless of whether I download a particular file from my server, setting the file extension in Edit :: Settings :: ASCII / Binary :: ASCII file, or manually specify Transfer :: Transfer Type :: ASCII, the file is downloaded in Binary mode. If I download the same file with WS_FTP it is downloaded correctly in ASCII mode.

I understand that some versions of SFTP don't have an ASCII transfer mode. If that is the case, either the options for ASCII / Binary should all be greyed out when connected via SFTP, or preferably SFTP would itself handle the ASCII / Binary conversion...

Quite often, after renaming a file in the remote server by pressing F2m typing the new name then the Enter key, the current remote directory will change by itself. The action is similar to what occurs if a remote directory is deleted, however the directory and the file are still intact. Occasionaly this takes a while to happen after the Enter key is pressed. Maybe renaming is not the only situation that causes this, can't know for sure.

some file on are missing from the remote pannel.

the server is an OpenVMS box running OpenVMS 7.2-1 and TCPIP Services v5.3

(maybe a 'show raw dir' option could help to debug)

It seems like none of the developer is willing to "track" any of the bugs posted herein. There are plenty of open bugs dated from last year, but nonbody knows, if they are solved, closed or still an issue. Not a single entry can be found in the 'colved' or 'closed' categories. FZ has some nice features and it's too bad, that user reponses seemed to be ignored -- at least here at Sourceforge.

The current release (2.17) is labeled "mature", but introduced a couple of new very annoying bugs, e.g. weired server directory changes and the non-functional queue (which was one of the reasons for me to choose FileZilla). It appears that I need to *downgrade* or worse: kick FileZilla and go back to my previous FTP client.

A disappointed user.

I cannot upload to an IBM MVS Server type. The directory listing shows empty, when it is not, and when I try to send the file I get the following:

Response: 230 XAHEDM is logged on. Working directory is "XAHEDM.". Status: Connected Status: Starting upload of O:\FTP Temp\test.send Command: CWD /'XAHEDM.'/ Response: 550 CWD cmd failed : EDC5129I No such file or directory. Command: CWD / Response: 250 HFS directory / is the current working directory Command: MKD 'XAHEDM.' Response: 550 error allocating XAHEDM. Command: CWD /'XAHEDM.'/ Response: 550 CWD cmd failed : EDC5129I No such file or directory. Error: Upload failed

I am using Version 2.17

I'm running FZ server (0.8.3) behind a router and cant get it to give out correct ip:port for pasv, no matter what I options I enter. Dynip support would be nice too ;) teilzeitprofi@…

I need to set the following to use FTP: USER remoteID@remoteHost

But this isnt implemented, so i just used

USER remoteID@remoteHost fireID

Then the log shows following: Antwort: 220 Welcome to fireproxy2. Status: Versuche develop.animanga.at über den Proxy zu erreichen Befehl: USER develop@… Antwort: 501 Invalid destination in user name.

I just think this is the space at the end of the request. Please implement USER remoteID@remoteHost too!

The problem is with filezilla server.

I don't know how to access files on different partitions (I tried cd d:

but it didn't work)

So I created .lnk file in my C: root, that points to my D: disk.

I can do cd DiskD.lnk

from ftp client, but I cannot cd into any subdir...

I hangs for some time, and then it outputs that directory isn't found.

I found that filezilla server had problems with folder names of Chinese characters. But rather, it's not just a DBCS (double-byte character system) compatability problem. I could enter those folders in question and get the file list normally, but when I started to download files in those folders, filezilla server reported "550 file not found" for each file. I tried to use the same Chinese characters as file names and those files could be downloaded normally. This problem occurs only with folders (with Chinese name), not files (with Chinese name), and only while downloading files in thoese folders. Looks like filezilla server has some problem handling folder names on action of file transfer.

Although not all Chinese characters cause this problem, it occurs very often. In my experience, 2 folders out of 4 exhibited this problem. It is probabily a bug ranther than a Chinese character compatability problem.

I tried two different clients, filezilla and windows xp built-in ftp, and confirmed that this problem was at server side. (The server was executed on windows me)

Repro steps: -Connect to a server -Begin a few binary uploads to the server -Stop the queue -Stop the program -Restart the program -Restart the queue

->The files are now transferred in ASCII mode

Expected-> The files have to be transferred in the appropriate mode, depending on their extension

When resizing, then minimizing filezilla and/or bringing it back to front, the transfer-queue window displays some two pixel-lines stuff that doesn't belong there. see image. nothing much of importance and probably easily fixed.

When I upload files to my website then there are several files that have a problem. The message are: Command: APPE b.htm Response: 451 b.htm Append/Restart not permitted, try again. Error: Upload failed

The above message comes several times for the same file and then stops trying. If I then remove the file from the website the upload works without problems.

A lot of files work without problem.

Erik

How to get the bug:

1) Clear the user name in the ident text box. Now disable the ident server, and then close the dialog. 2) Open the settings dialog again, and re-enable the ident server. Type a username into the text box. 3) Switch to a different pane in the settings box, e.g. "SFTP settings". Click OK.

You should now see a message box telling you to type a username, even if you have typed one.

...when pressing "Process the queue" button while not connected. I got instantly banned from the ftp due to 40 retries a sec. I want the client to start downloading (processing the que) when i get connected

As an example, we use Novell as our FTP server.

We cannot CD to <server>/<volume>/<path>

Client always seems to remove the second leading slash leaving us with "cd /<server>/<volume>/<path>"

Furthermore, client always appends another / to the end (and, it appears, the beginning) of any directory that doesn't have it. Relative pathing is a good thing (for example, ~ is very handy but doesn't work).

It'd be nice to have a hotkey bound to changing the directory, too.

Aaron aheck@…

When uploading a file using FileZilla in my intranet from Win2k to IBM AIX, it takes about 2 minutes to upload a 8MB file. Achieving a 79KB/s throughput.

When using ftp in the MSDOS command prompt, it takes about 3 seconds. However, download files in the same environment only takes about 3 seconds. Upload from Win2k to Win2k machines took 30 seconds with FileZilla while ftp from command prompt took 3 seconds. There is no speed limit set.

When I set the custom speed limit rules and click OK, the rules are GONE!!! But - when I restart FileZilla, they are there ???!!!! My settings are stored in XML file.

I have following problems with more than one instance of FileZilla:

Lets say we have Instance A and B (A started first)

I connect to a server with A and DL. Then I make a new entry in the Site Manager to U/L something. I do the transfer and close A.

Now: 1) The new site just isnt saved! 2) The queue of B wont be saved!

I wont submit thi tracker item, if I knew that this happens with EVERY FTP Client.

But, DAP (Download Accelerator Pro) hasnt got any problems, so i just say it:

When I have strange Chars in a Dirname, then it just says "Dir doesnt exist" These are as an example this strange y with two points over it...

I'm using Filezilla to conentc to an SSL ftp server (implicit encryptin), using a socks5 proxy. Everything works fine except upload. In this case filezilla send all data in few seconds instead of several minutes (with very large files). When arrived to 100% and after the timeout has expired, he disconnect from server; only some data arrive on the server, so I've to resume the upload, several times when the file is very large.

Under some circumstances, I cannot connect to my website with FileZilla. If I use another FTP Client, (like WS_FTP Pro) I get connected. If I use FileZilla a bit later, I can connect again without any modifications in the preferences or else panels.

This is the log I get when problem occurs. Etat : Connexion à sd21.sivit.org ... Etat : Connecté à sd21.sivit.org. Attente du message d'accueil... Réponse : 220 sd21.sivit.org FTP server (Version wu- 2.6.2(1) Tue Mar 4 15:42:58 CET 2003) ready. Commande : USER stephane Réponse : 331 Password required for stephane. Commande : PASS * Réponse : 230-No directory! Logging in with home=/ Réponse : 230 User stephane logged in. Etat : Connecté Etat : Récupération de la liste de répertoires... Commande : CWD /home/web/ Réponse : 250 CWD command successful. Commande : PWD Réponse : 257 "/home/web" is current directory. Commande : PORT 192,168,0,3,13,177 Réponse : 500 Illegal PORT Command Erreur : N'a pas pu récupérer la liste du répertoire Commande : TYPE A Réponse : 200 Type set to A. Commande : PWD Réponse : 257 "/home/web" is current directory. Commande : REST 0 Réponse : 350 Restarting at 0. Send STORE or RETRIEVE to initiate transfer. Commande : PWD Réponse : 257 "/home/web" is current directory. Commande : PWD Réponse : 257 "/home/web" is current directory. Commande : TYPE A Réponse : 200 Type set to A.

Hope this help. I like using your software. Without this problem I would be an happy guy !

I copy and paste ​ftp://ftp.sk.debian.org/.mnt3/tucows/windows/files7/Grea tStellaDemoInst.exe into the ADDRESS input box. FILEZILLA looks for ​ftp://ftp.sk.debian.org/.mnt3/tucows/windows/files7/Grea tStellaDemoInst.exe/ thinking the last part is a folder not a file. A connection is made but an error message folder not found is reported. Now it would be great if the common extensions where recognised. eg. doc, zip, html, exe,....

Or have I missed something?

I could not change my password. We have and AIX 4.3.3 server with OpenSSH. I enter my old password and my new password twice and all I get is a beep and the dialog goes away.

Now sure if *hang* is the right word but I've been experiencing hangs or jams in transfers when using filezilla to transfer files from my local sun ultra60 server into my PC (Win3K SP2).

The proceedure that i use is to drag a large number of files say 40 or more from the remote window to the local window. Files vary in sizes from 200K to 2MB (max).

The transfer begins fine and transfers the file quickly. But after a number of transfers (the exact number seems arbitrary) the transfers in the queue slow.

A couple of seconds go by and then I get a dialog box saying that the file that I am trying to transfer is on my system already, has a size of 0 bytes and do I want to overwrite, skip, etc....

In some cases this continues for each file in the queue in other cases the connection seems to *wake up* again and transfers begin again.

Messages in the log window when this happens are:

command: TYPE I Response: 200 Type set to I. Command: PORT xxx,xxx,xxx,81,9,25 Response: 200 PORT command successful. Command: RETR ASIN_one_seismic_u32 Response: 425 Can't create data socket (xxx.xxx.xxx.67,20): Interrupted system call. Error: Download failed

I can sucessfully transfer the same files using other programs between these two systems (windows ftp, ncftp(v3.1.4), and cygwin ftp);

If I drag and drop smaller amounts of files 5~10 I haven't run into this, It only seems when I queue a large number of files 40+.

steve@…

[I searched through the bugs; hopefully this isn't a duplicate]

Summary:

When I try to GET/PUT a file from a server where the remote path is on a network share, the FTP client appears to translate server/share/dir/filename.ext to /server/share/dir/filename.ext when changing directory prior to the GET/PUT command.

Server Configuration:

• Windows 2000 Server SP3; Cygwin 1.3.22-1; OpenSSH

3.6.1-P2.3.

Client Configuration:

• Windoes XP; FileZilla 2.1.7

Research:

• ​http://www.cygwin.com/ml/cygwin/2001-

07/msg01372.html

If you read through the thread, OpenSSH 2.9P2 had this problem and it had been patched. To isolate FileZilla, I used the OpenSSH and SecureFX client to try to reproduce the probem -- it only exists in FileZilla.

Connection Log:

Status: Connecting to outsourcing.meps.org:22 ... Status: Connected with outsourcing.meps.org:22, initializing SFTP connection... Command: CONNECT hooptie@…:22 Response: Remote working directory is san_home/storage/Home/Hooptie/My Documents Status: Connected Status: Retrieving directory listing... Command: PWD Response: Remote directory is san_home/storage/Home/Hooptie/My Documents Command: LIST Response: Listing directory san_home/storage/Home/Hooptie/My Documents Response: Sucessfully received 37 items Status: Directory listing successful Status: Retrieving directory listing... Command: CD Downloads Response: Remote working directory is now san_home/storage/Home/Hooptie/My Documents/Downloads Command: LIST Response: Listing directory san_home/storage/Home/Hooptie/My Documents/Downloads Response: Sucessfully received 26 items Status: Directory listing successful Status: Connecting to outsourcing.meps.org:22 ... Status: Connected with outsourcing.meps.org:22, initializing SFTP connection... Command: CONNECT hooptie@…:22 Response: Remote working directory is san_home/storage/Home/Hooptie/My Documents Status: Connected Status: Starting upload of C:\Documents and Settings\Hooptie\Desktop\Regional Training.zip Command: CD /san_home/storage/Home/Hooptie/My Documents/Downloads/ Response: Directory /san_home/storage/Home/Hooptie/My Documents/Downloads: no such file or directory Command: CD /san_home/storage/Home/Hooptie/My Documents/ Response: Directory /san_home/storage/Home/Hooptie/My Documents: no such file or directory Command: CD /san_home/storage/Home/Hooptie/ Response: Directory /san_home/storage/Home/Hooptie: no such file or directory

FileZilla doesn't like Windows FTP servers. It can't parse the path, I assume because it doesn't start with a slash.

Here's the log with debugging turned on:

Trace: FtpControlSocket.cpp(811) : List(FALSE,0,"","",1) Status: Retrieving directory listing... Command: PWD Trace: FtpControlSocket.cpp(315) : OnReceive(0) Response: 257 "C:/" is current directory Trace: FtpControlSocket.cpp(811) : List(FALSE,0,"","",0) Trace: FtpControlSocket.cpp(960) : Can't parse path! Trace: FtpControlSocket.cpp(2646) : ResetOperation(4) Error: Could not retrieve directory listing

ftp> quote syst 215 WIN32 A N (WFTPD by Texas Imperial Software)

It would be great if I could quickly change directories locally and remotely at the same time by holding down a key, such as CTRL and clicking on the directory in one view.

This will work a little like the following:

If key is pressed and directory is changed (doesn't matter in what view), FileZilla should check if the same directory exists in the other view. If it does, then it should open it up as well. If it doesn't, just open up in the view that was selected.

This would an excellent feature, especially for people that constantly change directories. Usually, the directory structures locally and remotely are the same.

setting the 'default remote directory' setting in Site Manager to a directory eg home will be saved as /home/

this works fine on a unix box but on a windows box it will fail

on a windows box the command 'cwd home' will work whereas 'cwd /home/' gives a 'could not receive directory error'

I tried to use View/Edit to download/edit/upload a file, but it didn't do the upload. I set up some associations such as

css C:\Program Files\Bradbury\TopStyle3\TopStyle3.exe html C:\Program Files\Bradbury\TopStyle3\TopStyle3.exe xml C:\Program Files\TextPad 4\TextPad.exe php C:\Program Files\TextPad 4\TextPad.exe

and the view function works fine.

But when I change the file, save it, then close the editor, the changed file is not uploaded.

sometimes after uploading the remote dir will change to the dir I was previously in when it refreshes. Doing a refresh before I upload will make it stay in the current dir.

if i pass ​sftp://user@host/tmp to FileZilla (2.1.7) it claims that the URL is invalid. the URL in question is valid and generated by FileZilla itself, the URL works if i use ​sftp://user:@host/tmp

The password in this case doesn't need to be given as i use pageant (putty ssh-agent) which authenticates for me. (thanks to the putty based ssh backend)

FileZilla should accept urls in form of ​ftp://[user[:pass]@]hostpath instead of ​ftp://[user:pass@]hostpath

When using FileZilla under Win98SE, High Contrast#2 colour scheme (black background, green text), the text in the Quick Connect bar is not visible (only see the fields, cannot see the words "Address:", "User:", "Password:", "Port:", as tehy are hard-coded as black text, and the colour scheme uses a black background). Other toolbars do not appear to be affected, but I did not check everything.

In FileZilla 2.1.6 sometimes when I use 'Overwrite if newer' and possibly also on 'Overwrite', the last few lines of a file is appended after the file has been uploaded completely.

For HTML files this means that the last few lines of code appear unparsed at the bottom of the page. I presume it would be harder to notice and more troublesome for binary files.

I can fix this by deleting the bad file and reuploading. Overwriting seems to cause the same problem.

This doesn't seem to be a file size problem as bigger or similarly sized files don't always have this problem.

Attached is a file that it happened to today. This was one of many.

When connecting to a FTP server over SSL the client displays a "Accept certificate?" dialog allowing the user to either reject or accept the certificate.

The dialog however does not display the keys fingerprint, making it impossible to determine if the client is talking to the server intended or that someone is using a man-in-the-middle attach to steal passwords using a fake certificate.

When Download a Large File suppose a file on server have size as (say) 20822112 but the d/l one will be (say) 20818104

It needs resume for the file can be fully d/l

I use filezilla 2.1.8 and very thanks to your application.

In my work, I try connect the server - SunOS myct 5.8 Generic_108528-13 sun4us - and successfuly connect. But, I can't see any file and directory. Of course, there are files and directories.

When I set PASV mode for single connection then also LIST command must be performed in this mode.

This doesn't seem to be the case in current version (2.1.8b), and my connection blocks since my firewall allows only passive (outgoing) connections.

Using FileZilla 2.1.4b, I can FTP files to Xbox normallyat a high speed, like several Mbps. Upgrading to FileZilla 2.1.5 and higher (I tried the latest 2.1.8b) the FTP uploads slow down to around 20-70K/sec. FTP downloads to PC are fast and it is just the uploads that are slow in later versions.

I am using EvolutionX and XBMP 2.4 as FTP server.

With version 2.1.8b, a new bug has been introduced for my system : I have Error: Timeout detected! Error: Unable to connect! Status: Waiting to retry... (5 retries left) but nothing happens, I have to retry manually.

There is still another problem. When the program has tried too many times to upload a file, Reset status doesn't fix the problem as I have the same message, I have to exit, then ask for an upload.

I agree, there is something broken in FileZilla CLient 2.1.8b, it does not use PASV mode under any of the two simple scenarios I tried, but uninstall, and install version 2.1.7, and using the same configuration, the PASV mode is working.

Remote host is under Unix (Solaris 8) with french language interface. File modified during July month are not visible in FileZilla interface.

With windows client FTP, "ls -l"command output is: -rw-rw-r-- 1 others achil 2883 mai 15 14:46 help.html -rw-rw-r-- 1 others achil 16447 jun 27 13:23 config.php -rw-rw-r-- 1 others achil 5798 jui 1 11:45 index.php

Under FilZilla, file "index.php" is not visible: help.html 2883 15/05/2003 14:46 config.php 16447 27/06/2003 13:23

It seems that output of command "LIST -a" / "ls -al" is not correctly analyzed...

Hi,

FileZilla client cannot connect to a FTP server with a large bitcount certificate of 4096 bits (and presumably larger bitcount certificates). What I see is a pause in the SSL connecting stage, FileZilla Client stalls after it prints out the Trace message:

Trace: AsynccSslSocket.cpp(871):SSL_connect:SSLv3 write finished A

Then a after a short while it timesout.

Error: Timeout Detected!

I've downloaded the source code and I see the openssl version flags indicate version "OpenSSL 0.9.6b 9 Jul 2001".

Can we please see the FileZIlla Client updated to the latest version of OpenSSL, version "OpenSSL 0.9.7b 10 Apr 2003" is the latest on the OpenSSL site.

Thanks! Jesse

On a win 2000 when I try to connect through a network drive the program just hangs..... and I have to force quit out of it.

if i transfer a number of file great of 5 (approximately), sometime, in the remote site, filezilla confuse the real name of files:

local remote but abc.htm -> abc.htm -> is the .htm abc.doc -> abc.doc -> is the .pdf abcd.pdf -> abcd.pdf -> is the .doc

this problem affect all version after 2.1.4, our servers are ProFTPD 1.2.2, ProFTPD 1.2.2rc3 and ProFTPD 1.2.7rc3

Uploading a file to MAC OS X (v10.2.x) using its built-in FTP server (lukemftp) is slow (~100KB/s) for version 2.1. 8.

I also tried v2.1.4 and it uploads at 4.1MB/s, so something has been broken. No speed limits were in place.

I guess this is a similar problem to the one someone has with uploading to an Xbox.

I have seen this problem with many comercial and freeware FTP apps such as BPFtp, CuteFTP. A few work properly - LeechFTP, WS-FTP.

Hi

I've just downloaded FileZilla Server and Client (2.1.8c) and trying to use SFTP to connect to the server (0.8.5) but unable to connect. I keep on getting timed out message.

Please help, here are the log messages

Normal FTP is working without any problems, but I need to use SFTP. I ve tried this on Windows 2000/XP but no success :-(

On the server

Connected. sending welcome message... 421 login time exceeded. Closing control connection. disconnected.

On the client

Status: Connecting to myserver:221 ... Trace: FzSFtp.exe: FzSFtp started and initialized. Trace: SftpControlSocket.cpp(2146): OnConnect(0) caller=0x00b09f60 Status: Connected with myserver:221, initializing SFTP connection... Command: CONNECT user@myserver:221 Trace: SftpControlSocket.cpp(2415): OnReceive(0) caller=0x00b09f60 Trace: SftpControlSocket.cpp(2423): OnClose(0) caller=0x00b09f60 Trace: FzSFtp.exe: SSH.C(2047): Unknown network error Response: Fatal: Unknown network error Trace: SftpControlSocket.cpp(2222): DoClose(8192) caller=0x00b09f60 Trace: SftpControlSocket.cpp(2252): ResetOperation (12292) caller=0x00b09f60 Error: Unable to connect!

Win98SE, FZ 2.1.8c

The message log always scrolls so that only the last line is visible. which makes it hard to see whats happening as it happens. Introduced since v2.1.7.

Win98SE, FZ 2.1.8c

Enter this into the address box: "ftp.redhat.com/pub/oops/" You connect the the server ok, get an error invalid path as expected and now cannot navigate the site, even though you are still connected.

The Programm hangs wenn i try to change the local destination to R:

the contents of R: is

Datenträger in Laufwerk R: hat keine Bezeichnung. Datenträgernummer: 0000-0000

Verzeichnis von R:\

13.07.2003 12:55 <DIR> . 13.07.2003 12:55 <DIR> .. 09.10.2002 10:47 <DIR> QOpenSys 09.10.2002 10:47 <DIR> QDLS 09.10.2002 10:47 <DIR> QSYS.LIB 09.10.2002 10:47 <DIR> QOPT 09.10.2002 10:47 <DIR> QFileSvr.400 09.10.2002 10:47 <DIR> QNTC 09.10.2002 14:02 <DIR> dev 09.10.2002 10:47 <DIR> home 15.07.2003 13:36 <DIR> tmp 28.11.2002 23:26 <DIR> etc 26.10.2002 09:05 <DIR> usr 09.10.2002 13:59 <DIR> QIBM 14.07.2003 21:10 <DIR> QSR 09.10.2002 14:02 <DIR> bin 09.10.2002 14:04 <DIR> var 14.07.2003 07:52 603 dev_rout 09.10.2002 14:18 <DIR> QTCPTMM 09.10.2002 14:18 <DIR> www 09.10.2002 15:39 <DIR> QNetWare 13.07.2003 12:55 0 QXDALISTEN 14.07.2003 11:40 <DIR> sapmnt 15.07.2003 05:56 <DIR> BRMSSPLF 06.05.2003 11:02 <DIR> sapcd 03.03.2003 14:50 <DIR> cd

2 Datei(en) 603 Bytes

24 Verzeichnis(se), 401'775'792'128 Bytes frei

Can you fix this Problem the Programm is Freezing _{, nothing do work .... after change to R: Please Help..... Thanks Nerve nerve@…}

When the queue has many small files that are being downloaded, it is difficult to choose a particular file in the queue because the selection keeps moving to another file.

For example, if I wanted to pause file foo.txt, I can't choose it to pause because everytime I click on it in the queue, the selected file moves.

A workaround I found is to stop the entire queue, make my changes, and then restart the queue.

A related problem I noticed happens when I select a bunch of files, and then choose "pause" from the right- click menu. The selection then just moves to the next batch of files in the list. This really isn't a bug, but it is quirky - I've never seen this behaviour with other windows apps. I would expect one of two things: (a) the selection is cleared, or (b) the status of the files just changes to "paused", but the same files remain selected.

Overall, this is a great product. Keep up the good work!

While mass processing (about several thousand files), filzilla keeps the log and tries to display it.. next start it reloads the whoe (!) log and tries displaying it again. this results in exhaustive memory usage and a too long startup time.

while reading the details of a transfer job, filezilla should keep the session open. at the moment it does not. some mass transfer jobs take about serveral hours (!) to be read in. whiy does filezille first read the whole directory tree in memory before (!) beginning the transfer? why doesn't it process the tree during transfer recursively?

The F5 button seems to be refreshing only the local window pane and not the remote site contents. However a click on the refresh button seems to refresh both the panes.

when doing a clean CVS checkout, res\donate.bmp is not present, causing the build to fail.

1. have a list of files in the download queue, all with

names long enough to warrant tool tips.

2. use the mouse to click on a file. (tool tip will

pop up)

3. use the up and down arrow keys to move around, tool

tip will keep popping up for the file with the mouse cursor on it. All good so far, as expected. Now...

4. go back down with the arrow keys to highlight the

file with the mouse pointer on it. (Don't move the mouse)

5. press delete on the keyboard to remove it from the

queue.

6. move up and down with the arrow keys. Now, the

tooltip that shows is for the deleted file, instead of the new file that has risen up the queue to replace it.

Same thing happens when a file completes and is removed from the top of the list, the tooltip still shows the old file name.

Moving the mouse away doesn't help, bringing the mouse back still shows the out of date tool tip. clicking the mouse somewhere fixes it though.

this is with version 2.1.9

Cheers, Karl P

The sunsolve support site returns with a 332 message and expects a response (in order to access patches).

The 332 message sends filezilla for a loop instead of prompting for input.

To replicate, ftp to sunsolve.sun.com with username sunsolve and password sunmicro.

I am using filezilla 2.1.9 client, transferring from *NIX to windows. When the file is to be transferred in ASCII, the sizes on *NIX and windows would be different (because of the CRLF conversions). If the file is already there in windows (transferred completely), the program (when set to resume, of course) tries to resume transfer where it should _never, ever_ do it.

If the file was transferred in binary, it is no problem since the sizes are equal (and the program recognizes that).

is a VirtualHost Support will be added in newer versions ?

I have two files with same name but part of file name is in CAPSLOCKS. e.g. myfile.java and myFILE.java. During ftp download only one file is getting downloaded that is myFILE.java and content its containg of myfile.java.

version 2.1.9

empty directory is not transferred!