Custom Query (4044 matches)

I just upgraded recently to 3.33.0 and at the end of the month I download an XMI file from z/OS which is an unloaded PDS file. I then run a check after the download using a tool called XMI Explorer to confirm the file is readable. Today the file is not. I then used standard DOS FTP to download same file and was ok. So what has changed in 3.33.0 that caused the corruption in the XMI files? I tried 6 other XMI files that worked in previous versions of FileZilla and they were corrupted using 3.33.0. I asked a colleague to try it as well and they too had the issue. The files are 39 meg so I can't attach to this record.If there is anything you need me to do let me know.

When downloading 100GB backup files the overwrite/resume prompt window shows old (cached?) size info about the local files after an unexpected reboot during long download (Enforced Windows Update reboot).

The Local site file listing also shows old data. Hitting F5 multiple times to refresh sometimes updates the window to the current file size. Without knowing it has to be refreshed, FileZilla will redownload large parts of the file.

Event Sequence: Start downloads at 9 am after backup finishes. File download is progressing to 80GB. Unexpected reboot happens at night. Restart the machine and reload Filezilla. Local site and overwrite/resume window show the file progress is at 50GB (the last server reconnect perhaps?) and resumes from 50GB point. Window Explorer shows file was 70GB before download resume.

Thanks for the great tool!

From About:

FileZilla Client

Version: 3.33.0

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2018-05-07 Compiled with: x86_64-w64-mingw32-gcc (GCC) 6.3.0 20170516 Compiler flags: -g -O2 -Wall

Linked against:

wxWidgets: 3.0.5 SQLite: 3.22.0 GnuTLS: 3.5.18

Operating system:

Name: Windows 10 (build 16299), 64-bit edition Version: 10.0 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx aes pclmulqdq rdrnd Settings dir: C:\Users\media\AppData\Roaming\FileZilla\

Expected: 1) Idle timeout causes disconnect. 2) User request a refresh. 3) FileZilla should immediately reconnect and refresh listing.

Observed: 1) Idle timeout elapses, connection dies. (no messages in the log indicate this) 2) User request a refresh. 3) "Delay between reconnect attempts" (e.g. 20sec) is enforced 4) FileZilla reconnects and refreshes directory listing

It seems like FileZilla is not aware that the connection has been terminated due to idle timeout until it tries to use the dead connection again. The disconnect button on the toolbar also remains available after the timeout disconnect. In fact, using the Disconnect and Reconnect buttons will work as expected for a connected session, even after the idle timeout has long passed.

Log set to Debug is pasted below with event comments

Trace: CTransferSocket::OnConnect Trace: CTlsSocketImpl::OnRead() Trace: CTransferSocket::OnReceive(), m_transferMode=0 Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CTlsSocketImpl::OnRead() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer ok. Trace: CFtpRawTransferOpData::ParseResponse() in state 7 Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CControlSocket::ParseSubcommandResult(0) Trace: CFtpListOpData::SubcommandResult() in state 3 Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing of “/path/data" successful Trace: CFileZillaEnginePrivate::ResetOperation(0)

* This is where I wait for the “timeout”

• This timeout value is set in …. Edit > Settings > Connection > Timeout in seconds = 10 (10 sec for testing)
• About 15 seconds after the last log message, I hit refresh…
• I would expect the client would already knows it has idle-timeout disconnected at this point.

Status: Retrieving directory listing of “/path/data"... Trace: CControlSocket::SendNextCommand() Trace: CFtpListOpData::ListSend() in state 0 Trace: CFtpChangeDirOpData::Send() in state 0 Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CControlSocket::ParseSubcommandResult(0) Trace: CFtpListOpData::SubcommandResult() in state 1 Trace: CControlSocket::SendNextCommand() Trace: CFtpListOpData::ListSend() in state 2 Trace: CFtpRawTransferOpData::Send() in state 2 Command: PASV Error: Connection timed out after 10 seconds of inactivity

* This is where the “Delay between failed retry attempts” is enforced (e.g. 20 sec).

Trace: CRealControlSocket::DoClose(2050) Trace: CControlSocket::DoClose(2050) Trace: CFtpControlSocket::ResetOperation(2114) Trace: CControlSocket::ResetOperation(2114) Trace: CFtpControlSocket::ResetOperation(2114) Trace: CControlSocket::ResetOperation(2114) Error: Failed to retrieve directory listing Trace: CFileZillaEnginePrivate::ResetOperation(2114) Status: Disconnected from server Trace: CRealControlSocket::DoClose(66) Trace: CControlSocket::DoClose(66) Trace: CRealControlSocket::DoClose(66) Trace: CControlSocket::DoClose(66) Trace: CControlSocket::DoClose(66) Trace: CFileZillaEnginePrivate::ResetOperation(0) Trace: CControlSocket::SendNextCommand() Trace: CFtpLogonOpData::Send() in state 0

* From here, the reconnect proceeds as expected, and refreshes the directory listing.

Thanks for taking a look. For now I just put 2 hours for the idle timeout, even though that's not really ideal. I also don't know if this is in the client or libfilezilla but it manifests in the client so that's what I chose.

When I try to move some FileZilla file to my desktop it gives the following error: ​http://prntscr.com/jtfz09

FileZilla version information: ​http://prntscr.com/jtg535

I'm getting a False Positive for my installer file created with reputable Tarma.com installer. The error is Win.Trojan.Antifw-172 I have been using Tarma created installers for many years without incident. I finally was able to upload the file as a Zip using another FTP client. You can find the file at ​ftp://euzinho1845351@ftp.toolboxw.com/download/ToolBoxW-Setup.zip

Hallo,

After the last update of Windows 10, the drag-and-drop functionality (on the local desktop) will stop working. I have already uninstalled FileZilla and then reinstalled it again. That did not help. I also reinstalled the shell extension. That did not help either. What possibility do I have left ?. What may the mistake be?

nach dem letzten Update von Windows 10 funktioniert die Drag&Drop-Funktion (auf den lokalen Desktop) nicht mehr. Ich habe FileZilla bereits einmal deinstalliert und anschließend wieder neu installiert. Das hat nichts geholfen. Ich habe auch die Shell-Erweiterung neu installiert. Auch das hat nicht geholfen. Welche Möglichkeit habe ich noch?. Woran mag der Fehler liegen?

FileZilla is consistently failing to update on two different W10 PC's and has been for some weeks (I don't use it very often).

Started update check on 2018-06-20 09:41:40 Own build type: official Downloading /update.php?platform=x86_64-w64-mingw32&version=3.31.0&osversion=10.0&osarch=64&updated=1&cpuid=sse,sse2,sse3,ssse3,sse4.1,sse4.2,avx,avx2,aes,pclmulqdq,rdrnd,bmi2,bmi2,adx&initial=0 Resolving address of update.filezilla-project.org Connecting to 136.243.154.122:443... Connection established, initializing TLS... Verifying certificate... TLS connection established, sending HTTP request File transfer successful, transferred 20,748 bytes in 1 second Parsing 20748 bytes of version information. Found new nightly 2018-06-20 Found new release 3.34.0 Downloading /FileZilla_3.34.0_win64-setup.exe Resolving address of dl2.cdn.filezilla-project.org Connecting to 78.46.136.26:443... Connection established, initializing TLS... Verifying certificate... TLS connection established, sending HTTP request File transfer successful, transferred 7,922,200 bytes in 16 seconds Local size of 'C:\Users\Malcolm\AppData\Local\Temp\fzupdate_d0c97abf64ea84be.tmp' does not match expected size: 0 != 7922200

There is no file of that name in Temp, although it appears briefly during the download. 8MB in 16 seconds is exactly right for our 4Mbps copper, so something's deleting the file.

I can't use latest v. 3.34.0 on Mac OSX 10.13.5 The Site Manager is not fully showing, so I can't select my sites from the list. Attached screenshot.

My MacBook Air is using OS X Yosemite version 10.10.5

From the trac.filezilla-project.org site I click the green button on the download Client File Zilla.

1) I see, at the bottom left of my screen, it loading. It takes about 5 seconds, I briefly see a green check mark and then I see up at the top of my screen:my sophos anti-virus says "Adware or PUA detected by Sophos Anti-Virus" and "Adware or PUA InstallCore (ID:5) has been blocked and listed in Quarantine Manager" When I open Quarantine Manager I get: /Users/agw/Downloads/FileZilla_3.34.0_macosx-x86_setup_bundled.dmg

2) When I click on the rectangle for FileZilla, I get a 'warning' box that says 'the following disc images couldn't be opened' and then I get a small 'chart' where under image it says FileZilla_3.34_0 macos and under 'Reason' it says 'Permission denied'.

after 4 or 5 minutes of ftp download i have a reboot of my Mac mini (every time i use this version of filezilla) - the system information log indicate a kernel panic in some filezilla component- i use the last filezilla version 3.34.0

this is the log of the report /Library/Logs/DiagnosticReports/Kernel_2018-06-23-075122_Mac-mini-di-Pietro.panic

Dimensione: 8 KB (8.151 byte) Ultima modifica: 23/06/18, 07:51 Contenuto recente: Anonymous UUID: 34A6C72C-8B72-60A1-9124-DCD43FBF5512

Sat Jun 23 07:51:20 2018

* Panic Report * panic(cpu 0 caller 0xffffff8003787d3d): Kernel trap at 0xffffff7f83e2a9f5, type 14=page fault, registers: CR0: 0x0000000080010033, CR2: 0x0000000000000018, CR3: 0x00000001da0ac097, CR4: 0x00000000001627e0 RAX: 0x0000000000000000, RBX: 0xffffff80181c6968, RCX: 0x00000000031f0000, RDX: 0xffffff801c3a5090 RSP: 0xffffff91125a3420, RBP: 0xffffff91125a36e0, RSI: 0x0000000000001000, RDI: 0xffffff80181c6968 R8: 0xffffff80284f7f80, R9: 0x0000000000000000, R10: 0xffffff91125a3a48, R11: 0xffffff7f843d8810 R12: 0xffffff801c417a00, R13: 0x0000000000000880, R14: 0xffffff8023b0a000, R15: 0xffffff91125a36f0 RFL: 0x0000000000010246, RIP: 0xffffff7f83e2a9f5, CS: 0x0000000000000008, SS: 0x0000000000000010 Fault CR2: 0x0000000000000018, Error code: 0x0000000000000000, Fault CPU: 0x0, PL: 0, VF: 0

Backtrace (CPU 0), Frame : Return Address 0xffffff91125a2ed0 : 0xffffff800366d166 0xffffff91125a2f20 : 0xffffff8003795824 0xffffff91125a2f60 : 0xffffff8003787b10 0xffffff91125a2fe0 : 0xffffff800361f180 0xffffff91125a3000 : 0xffffff800366cbdc 0xffffff91125a3130 : 0xffffff800366c99c 0xffffff91125a3190 : 0xffffff8003787d3d 0xffffff91125a3310 : 0xffffff800361f180 0xffffff91125a3330 : 0xffffff7f83e2a9f5 0xffffff91125a36e0 : 0xffffff80038ca7f3 0xffffff91125a3750 : 0xffffff80038a0aaa 0xffffff91125a3b30 : 0xffffff8003ae88a0 0xffffff91125a3b90 : 0xffffff80038a1db9 0xffffff91125a3bb0 : 0xffffff80038c1470 0xffffff91125a3bf0 : 0xffffff80038b0157 0xffffff91125a3f10 : 0xffffff80038b08ef 0xffffff91125a3f40 : 0xffffff8003c03bd8 0xffffff91125a3fa0 : 0xffffff800361f966

Kernel Extensions in backtrace:

com.paragon-software.filesystems.ntfs(318.3.14)[F6A7BB1D-5A30-3EAA-9644-77F98E29F1AE]@0xffffff7f83e22000->0xffffff7f83e55fff

BSD process name corresponding to current thread: filezilla

Mac OS version: 17F77

Kernel version: Darwin Kernel Version 17.6.0: Tue May 8 15:22:16 PDT 2018; root:xnu-4570.61.1~1/RELEASE_X86_64 Kernel UUID: CC1699EE-71B5-3AF1-AAA3-6DBD16222B92 Kernel slide: 0x0000000003400000 Kernel text base: 0xffffff8003600000 HIB text base: 0xffffff8003500000 System model name: Macmini7,1 (Mac-35C5E08120C7EEAF)

System uptime in nanoseconds: 1405199874643 last loaded kext at 311164317994: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7f89067000, size 69632) last unloaded kext at 397938918751: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7f89067000, size 61440) loaded kexts: org.virtualbox.kext.VBoxNetAdp 5.1.24 org.virtualbox.kext.VBoxNetFlt 5.1.24 org.virtualbox.kext.VBoxUSB 5.1.24 com.avira.kext.FileAccessControl 1.2.5 org.virtualbox.kext.VBoxDrv 5.1.24 com.paragon-software.filesystems.ntfs 318.3.14 com.apple.filesystems.smbfs 3.2.3 com.apple.driver.AppleBluetoothMultitouch 92 com.apple.driver.AudioAUUC 1.70 com.apple.driver.ApplePlatformEnabler 2.7.0d0 com.apple.driver.AGPM 110.23.37 com.apple.driver.X86PlatformShim 1.0.0 com.apple.filesystems.autofs 3.0 com.apple.driver.AppleUpstreamUserClient 3.6.5 com.apple.driver.AppleMCCSControl 1.5.5 com.apple.driver.AppleHDA 281.52 com.apple.driver.AppleGraphicsDevicePolicy 3.18.52 com.apple.AGDCPluginDisplayMetrics 3.18.52 com.apple.driver.pmtelemetry 1 com.apple.iokit.IOUserEthernet 1.0.1 com.apple.iokit.IOBluetoothSerialManager 6.0.6f2 com.apple.Dont_Steal_Mac_OS_X 7.0.0 com.apple.driver.AppleHV 1 com.apple.driver.eficheck 1 com.apple.driver.AppleIntelHD5000Graphics 10.3.4 com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0 com.apple.driver.AppleOSXWatchdog 1 com.apple.driver.AppleLPC 3.1 com.apple.driver.AppleIntelFramebufferAzul 10.3.4 com.apple.driver.AppleThunderboltIP 3.1.1 com.apple.driver.AppleIRController 353 com.apple.iokit.SCSITaskUserClient 404.30.2 com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1 com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0 com.apple.AppleSystemPolicy 1.0 com.apple.BootCache 40 com.apple.filesystems.hfs.kext 407.50.6 com.apple.driver.AppleSDXC 1.7.6 com.apple.iokit.AppleBCM5701Ethernet 10.3.1 com.apple.driver.AirPort.BrcmNIC 1241.31.1a9 com.apple.driver.AppleAHCIPort 329.50.2 com.apple.driver.AppleRTC 2.0 com.apple.driver.AppleACPIButtons 6.1 com.apple.driver.AppleHPET 1.8 com.apple.driver.AppleSMBIOS 2.1 com.apple.driver.AppleACPIEC 6.1 com.apple.driver.AppleAPIC 1.7 com.apple.nke.applicationfirewall 183 com.apple.security.quarantine 3 com.apple.security.TMSafetyNet 8 com.apple.driver.AppleBluetoothHIDKeyboard 205 com.apple.driver.AppleHIDKeyboard 205 com.apple.iokit.IOUSBUserClient 900.4.1 com.apple.driver.IOBluetoothHIDDriver 6.0.6f2 com.apple.driver.AppleMultitouchDriver 1404.4 com.apple.driver.AppleInputDeviceSupport 1404.3 com.apple.kext.triggers 1.0 com.apple.driver.AppleSMBusController 1.0.18d1 com.apple.driver.DspFuncLib 281.52 com.apple.kext.OSvKernDSPLib 526 com.apple.driver.AppleGraphicsControl 3.18.52 com.apple.iokit.IOSerialFamily 11 com.apple.iokit.IOAVBFamily 680.2 com.apple.plugin.IOgPTPPlugin 680.15 com.apple.driver.AppleSSE 1.0 com.apple.AppleGPUWrangler 3.18.52 com.apple.iokit.IONDRVSupport 519.19 com.apple.driver.AppleHDAController 281.52 com.apple.iokit.IOHDAFamily 281.52 com.apple.iokit.IOAudioFamily 206.5 com.apple.vecLib.kext 1.2.0 com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0 com.apple.AppleGraphicsDeviceControl 3.18.52 com.apple.iokit.IOAcceleratorFamily2 378.18.1 com.apple.iokit.IOGraphicsFamily 519.19 com.apple.iokit.IOSurface 211.12 com.apple.driver.X86PlatformPlugin 1.0.0 com.apple.driver.IOPlatformPluginFamily 6.0.0d8 com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 6.0.6f2 com.apple.iokit.IOBluetoothHostControllerUSBTransport 6.0.6f2 com.apple.iokit.IOBluetoothHostControllerTransport 6.0.6f2 com.apple.iokit.IOBluetoothFamily 6.0.6f2 com.apple.iokit.IOSCSIMultimediaCommandsDevice 404.30.2 com.apple.iokit.IOBDStorageFamily 1.8 com.apple.iokit.IODVDStorageFamily 1.8 com.apple.iokit.IOCDStorageFamily 1.8 com.apple.driver.usb.IOUSBHostHIDDevice 1.2 com.apple.driver.usb.AppleUSBHub 1.2 com.apple.driver.usb.networking 5.0.0 com.apple.driver.usb.AppleUSBHostCompositeDevice 1.2 com.apple.filesystems.hfs.encodings.kext 1 com.apple.driver.AppleThunderboltDPInAdapter 5.5.4 com.apple.driver.AppleThunderboltDPAdapterFamily 5.5.4 com.apple.driver.AppleThunderboltPCIDownAdapter 2.1.3 com.apple.iokit.IOAHCIBlockStorage 301.40.2 com.apple.driver.AppleThunderboltNHI 4.7.2 com.apple.iokit.IOThunderboltFamily 6.7.8 com.apple.iokit.IOEthernetAVBController 1.1.0 com.apple.iokit.IO80211Family 1200.12.2 com.apple.driver.mDNSOffloadUserClient 1.0.1b8 com.apple.driver.corecapture 1.0.4 com.apple.iokit.IOAHCIFamily 288 com.apple.driver.usb.AppleUSBXHCIPCI 1.2 com.apple.driver.usb.AppleUSBXHCI 1.2 com.apple.driver.usb.AppleUSBHostPacketFilter 1.0 com.apple.iokit.IOUSBFamily 900.4.1 com.apple.driver.AppleUSBHostMergeProperties 1.2 com.apple.driver.AppleEFINVRAM 2.1 com.apple.driver.AppleEFIRuntime 2.1 com.apple.iokit.IOHIDFamily 2.0.0 com.apple.iokit.IOSMBusFamily 1.1 com.apple.security.sandbox 300.0 com.apple.kext.AppleMatch 1.0.0d1 com.apple.driver.AppleFDEKeyStore 28.30 com.apple.driver.AppleEffaceableStorage 1.0 com.apple.driver.AppleKeyStore 2 com.apple.driver.AppleUSBTDM 439.60.2 com.apple.driver.AppleMobileFileIntegrity 1.0.5 com.apple.iokit.IOUSBMassStorageDriver 140.50.3 com.apple.iokit.IOSCSIBlockCommandsDevice 404.30.2 com.apple.iokit.IOSCSIArchitectureModelFamily 404.30.2 com.apple.driver.AppleCredentialManager 1.0 com.apple.driver.KernelRelayHost 1 com.apple.iokit.IOUSBHostFamily 1.2 com.apple.driver.usb.AppleUSBCommon 1.0 com.apple.driver.AppleBusPowerController 1.0 com.apple.driver.AppleSEPManager 1.0.1 com.apple.driver.IOSlaveProcessor 1 com.apple.driver.DiskImages 480.60.1 com.apple.iokit.IOStorageFamily 2.1 com.apple.iokit.IOReportFamily 31 com.apple.iokit.IOTimeSyncFamily 680.15 com.apple.iokit.IONetworkingFamily 3.4 com.apple.driver.AppleACPIPlatform 6.1 com.apple.driver.AppleSMC 3.1.9 com.apple.iokit.IOPCIFamily 2.9 com.apple.iokit.IOACPIFamily 1.4 com.apple.kec.Libm 1 com.apple.kec.pthread 1 com.apple.kec.corecrypto 1.0

EOF

I installed FieZilla, which immediately offered me a new version. I accepted and was sent an archive. I did not find a readme or other installation guide. For example, the de-archiving program asked me what to name what I was extracting. I assume that has to be a name that will be recognized by the OS desktop environment's main menu. I don't know what that name is, although maybe someone on the Internet knows. I assume I have to configure configuration files external to FileZilla, but I don't know which files or to say what. I assume the installed directories and files have to go to certain locations, but I don't know where and it's probably not the de-archiver's default destination, which is the /downloads/ directory for my login. And I think I see "nightlybuild", perhaps as an owner's name, which suggests that I'm upgrading from a stable version to an unstable one without notice, even though the right-hand version number is "0".

Please include an installation guide. A root-level readme.txt file might be all we need.

Please tell us if the new version is stable, especially in the old version's offer of a new version.

This installation attempt was on June 20, 2018.

When I download a folder containing thousands of files and sub-folders I receive a lot of "Target file already exists" pop-ups. I am downloading into an empty folder, so apparently FZ is trying to download the same file twice. I can see from the timestamp of the "already existing" file that it has just been downloaded, but now the file apparently is being downloaded again. I have also observed, that the file that is to be overwritten is smaller than the source file, i.e. the file wasn't transferred fully, but I did not receive any error messages. What is going on? I am really worried if I can trust that everything has been downloaded correctly.

I upgraded to 3.34.0, and now my site manager which lists my sites is super narrow and I cannot change its width.

Hello, English I do not know very well. I would like to ask how I will contact the FileZilla Clip I have lost to password.

Thank you very much!

vag

when using socks5,i upload file less than 8760, it displays 'transfer success'. but file size is zero in server. i tested other ftp client,all are ok . i capture packets, the filezilla client uses EPSV mode, others use PASV mode,maybe this is the problem.

Dragging a new file into the upload queue sometimes causes the following errror:

ASSERT INFO:
./src/generic/listctrl.cpp(3422): assert "litem >= 0 && (size_t)litem < GetItemCount()" failed in SetItemState(): invalid list ctrl item index in SetItem

BACKTRACE:
[1] wxGenericListCtrl::SetItemState(long, long, long)
[2] wxEvtHandler::TryHereOnly(wxEvent&)
[3] wxEvtHandler::ProcessEventLocally(wxEvent&)
[4] wxEvtHandler::ProcessEvent(wxEvent&)
[5] wxEvtHandler::ProcessPendingEvents()
[6] wxAppConsoleBase::ProcessPendingEvents()
[7] wxApp::DoIdle()
[8] g_main_context_dispatch
[9] g_main_loop_run
[10] gtk_main
[11] wxGUIEventLoop::DoRun()
[12] wxEventLoopBase::Run()
[13] wxAppConsoleBase::MainLoop()
[14] wxEntry(int&, wchar_t**)
[15] __libc_start_main

FileZilla Client
----------------

Version:          3.34.0

Build information:
  Compiled for:   x86_64-pc-linux-gnu
  Compiled on:    x86_64-pc-linux-gnu
  Build date:     2018-06-18
  Compiled with:  gcc (GCC) 8.1.1 20180531
  Compiler flags: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong -fno-plt -Wall -g

Linked against:
  wxWidgets:      3.0.4
  SQLite:         3.24.0
  GnuTLS:         3.5.18

Operating system:
  Name:           Linux 4.17.3-1-ARCH x86_64
  Version:        4.17
  CPU features:   sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi2 bmi2 adx
  Settings dir:   /home/user/.config/filezilla/

As soon as the language is set to default system language (which is german on my system) or to german language, the settings/preferences windows uses the full width of the screen.

Setting the language to english reverts to a normal sized window

Hello,

There is a bug, when i am trying to sort the images on a folder from 1-27 it doesn't listing them correctly.

I am using 3.35.0-rc2 x64

It should be displayed:

1.png 2.png ...

Example video: ​https://ufile.io/beci2

• Thanks!

Is this a FileZilla problem or a GoDaddy problem?

Why is the Port field in the General Tab always empty after clicking on Site Manager to connect to a previously saved server, even though I saved the port number during the initial setup? I always have to manually enter the port number before connecting to my site. Any insight on this?

FileZilla Client

Version: 3.34.0

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2018-06-15 Compiled with: x86_64-w64-mingw32-gcc (GCC) 6.3.0 20170516 Compiler flags: -g -O2 -Wall

Linked against:

wxWidgets: 3.0.5 SQLite: 3.22.0 GnuTLS: 3.5.18

Operating system:

Name: Windows 10 (build 17134), 64-bit edition Version: 10.0 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi2 bmi2 adx Settings dir: C:\Users\Matt\AppData\Roaming\FileZilla\

Hello,

When I tried dragging and dropping a folder from the FTP site unto my desktop pc, I received the following error. It wouldn't let me move anything from within FileZilla to my desktop, where it used to in the past before the last update. Can this be fixed?

Please note, I can drag and drop file to replace things onto FTP just fine, just not the other way around.

See: ​http://automatebpos.com/FTP_Error.JPG

filezilla.exe" -c "0/MyFTPSiteEntry" doesn't function or is ignored after upgrading to build 3.35.1 from 3.33.0.

Documented on ​https://wiki.filezilla-project.org/Command-line_arguments_(Client)

Tested upgrades on Windows 7 and Windows 10.

I can't drag and drop from the server to my folders outside FileZilla, only inside.

Command-line argument (-c, --site=<string>) not working since upgrade to 3.35.0. Client does not Connect to specified Site Manager site, it just opens as if no arguments were specified. All works as it used to when I downgrade to 3.34.0

Ever since last update, it always takes 2 tries to rename a file.

1st try does nothing. 2nd try always successful.

OS: Windows 10

I have Windows 10 Build 1803 (build SO 17134.167).

When I drag a file from FileZilla directly into a folder on my computer, without using the FileZilla folder explorer, I get the error asking me to install the shell extension.

If instead I drag a file from the computer to FileZilla there are no problems.

When starting the client via command line, FZ starts up but does not invoke any site settings. E.g. "C:\Program Files (x86)\FileZilla FTP Client\filezilla.exe" --site=mySite starts the client but does not initiate a session using the mySite settings. It behaves the same as if --site were not specified.

I have not used FileZilla for a few months. I need to update some of my website files, and when I opened FileZilla to transfer them, there was a new update option. I updated to the newest version, 3.35.1.

I always move 1 file first to test and make sure everything is okay. I moved 1 file over to update. Filezilla said that it updated successfully and the last modified date is today. Then I went to the website to be sure the changes were reflected, and there were NOT!

I checked the source code on the website and it shows that it is still the old file. I am not sure if this is a server or client problem.

All I know is that the new file, with today's date shows up in the public_html area in FileZilla on my computer. And the udpates do not appear on my website and the source code on the website reflects the old file.

Also, when I opened FileZilla, I had to connect to my site. It did not connect automatically. I thought that it used to connect automatically when opening FileZilla. I may be remembering incorrectly here.

Thank you

Nikki Geannelis gnikki@…

I use the rename feature quite often within FileZilla and just recently it seems to not work properly. I change the name and it reverts back to the original name. After I select refresh the new name appears. So it seems to be updating the name but not showing on the screen. Please let me know if there is a fix. This just started with the latest update I downloaded.

Please refresh Queued Files Upon upload and download. FileZilla Client

Version: 3.35.1

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2018-07-23 Compiled with: x86_64-w64-mingw32-gcc (GCC) 6.3.0 20170516 Compiler flags: -g -O2 -Wall

Linked against:

wxWidgets: 3.0.5 SQLite: 3.22.0 GnuTLS: 3.5.18

Operating system:

Name: Windows 10 (build 17134), 64-bit edition Version: 10.0 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 Settings dir: C:\Users\kentw\AppData\Roaming\FileZilla\

Example - data being sent is pricing data for different manufacturers in the outdoor power equipment industry. In this case, the package quantity column, a three character field, contained ##1 instead of 001. The data files on our computer had no corruption until a user of our service tried to process the data after we uploaded the file via the FileZilla client - version 3.35.1

As of fileZilla version 3.35.2 the -s and --site-manager command line parameter switches do nothing when specified after the program path and name (out side of the ending double quote) in the properties box of a windows 10 desktop icon. I tried using -site-manager as well, but that gave me an unknown command message, but with either -s or --site-manager, no error message is displayed.

I expect that the -s and --site-manager switches should display the site manager dialog after fileZilla starts.

I routinely use FileZilla client with two FTP servers. Immediately after updating the client to version 3.36.0 it started routinely crashing while "Retrieving directory listing..." from one of these servers. With the other server, I see no problem.

The filezilla software closes after a few seconds after I update the latest version on this day.

Before version update I was able to use "Alt key" to select non-adjacent files for group uploads. After update this no longer functions.

FileZilla version: 3.36.0 Operating System: Windows 8.1 (build 9600), 64-bit edition OS version: 6.3 Platform: 64-bit system

14:03:04 Status: Resolving address of ftp.XXXXXXXXX.com 14:03:04 Status: Connecting to XXX.XXX.XXX.X:21... 14:03:04 Status: Connection established, waiting for welcome message... 14:03:47 Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- 14:03:47 Response: 220-You are user number 4 of 50 allowed. 14:03:47 Response: 220-Local time is now 14:03. Server port: 21. 14:03:47 Response: 220-This is a private system - No anonymous login 14:03:47 Response: 220-IPv6 connections are also welcome on this server. 14:03:47 Response: 220 You will be disconnected after 15 minutes of inactivity. 14:03:47 Command: AUTH TLS 14:03:47 Error: Could not connect to server 14:03:47 Status: Waiting to retry... 14:03:52 Status: Resolving address of ftp.XXXXXXXXXXXX.com 14:03:52 Status: Connecting to XXX.XXX.XXX.X:21... 14:03:52 Status: Connection established, waiting for welcome message... 14:03:52 Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- 14:03:52 Response: 220-You are user number 5 of 50 allowed. 14:03:52 Response: 220-Local time is now 14:03. Server port: 21. 14:03:52 Response: 220-This is a private system - No anonymous login 14:03:52 Response: 220-IPv6 connections are also welcome on this server. 14:03:52 Response: 220 You will be disconnected after 15 minutes of inactivity. 14:03:52 Command: AUTH TLS 14:04:30 Error: Could not connect to server Hi, I'm a new user of FileZilla. I'm not familiar with how the systems work. I tried to connect with my server in Cpanel but it kept failing. I've tried a few solutions from Google but it still not connecting. Can someone suggest me something that really gonna solve this issue? Thank you.

I have updated just some minutes ago to the latest version and every time I try to connect to an FTP server, after "reading folder" the software crash. It happens with every FTP I'm working on. It was all good before the update

See attached screenshot, in which "inbox" is shadowed over Chrome. This remains even after closing the program, until I disconnect my monitor or change my display settings. It does not change if I connect to a second site; the first one chosen still remains as a shadow. I am unsure whether this was happening only in version 3.35.2 or if it continues in 3.36...I had to uninstall 3.36 because of the FTP/TLS changes until I get a response from my customer about settings for their server.

After several days of continued OS operation, and sleeps, the main menu icon bar, puts he wrong icons up. see attached example. the close and reconnect server buttons, has the setup icon by mistake.

We have hundreds of enterprise customers worldwide testing our products early while they are making purchase decisions and they need the drivers that we host on our FTP site.

Hi, It is the second time when I have an update of your software (last one was for the version 3.35) and now for the version 3.37. I have no more your software when the update is begun, I obtain the following error message: (can' t write: C:\Programme Files\FileZillaFTP Client\filezilla.exe). What is the problem and it would always be the case in the future?

Unable to start FileZilla due to this error

Log Name: Application Source: Application Error Date: 9/16/2018 7:42:56 AM Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Description: Faulting application name: filezilla.exe, version: 3.36.0.0, time stamp: 0x00000000 Faulting module name: libgnutls-30.dll, version: 0.0.0.0, time stamp: 0x00000000 Exception code: 0xc0000005 Fault offset: 0x00000000000b04f2 Faulting process id: 0x16ec Faulting application start time: 0x01d44db2683e78ee Faulting application path: C:\Program Files (x86)\FileZilla FTP Client\filezilla.exe Faulting module path: C:\Program Files (x86)\FileZilla FTP Client\libgnutls-30.dll Report Id: a6f21fae-b9a5-11e8-9474-50af73232c9b Faulting package full name: Faulting package-relative application ID: Event Xml: <Event xmlns="​http://schemas.microsoft.com/win/2004/08/events/event">

<System>

<Provider Name="Application Error" /> <EventID Qualifiers="0">1000</EventID> <Level>2</Level> <Task>100</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2018-09-16T11:42:56.000000000Z" /> <EventRecordID>99802</EventRecordID> <Channel>Application</Channel> <Security />

</System> <EventData>

<Data>filezilla.exe</Data> <Data>3.36.0.0</Data> <Data>00000000</Data> <Data>libgnutls-30.dll</Data> <Data>0.0.0.0</Data> <Data>00000000</Data> <Data>c0000005</Data> <Data>00000000000b04f2</Data> <Data>16ec</Data> <Data>01d44db2683e78ee</Data> <Data>C:\Program Files (x86)\FileZilla FTP Client\filezilla.exe</Data> <Data>C:\Program Files (x86)\FileZilla FTP Client\libgnutls-30.dll</Data> <Data>a6f21fae-b9a5-11e8-9474-50af73232c9b</Data> <Data> </Data> <Data> </Data>

</EventData>

</Event>

Hi,

Versions :

I'm using FTP 3.37.0 (compilation date 2018-09-17) under Windows 10 Enterprise (Version 1703, 15063.1324), all in french.

Settings:

I've a site registered :

• FTP Explicit with TLS if possible;
• Host name setup, no port setup (21 used)
• Normal authentication, login with a '|' and a regular password
• Second tab is left empty/default;
• Third tab is set to passive transfer mode, nothing else modified;
• 4th/last tab left as default.

It's not a public ftp so i can give it by mail but not in public.

Usage: The certificate is expired, and is well raised as expired with a pop-up, with expiratino date in red (level 0). But when i use the drop-down list to see intermediate certificate (n°1) and root certificate (n°2), the expiration date is colored red, even if their expiration date is in the future.

Abnormal behaviour: It seems that the red color of the 'expiration date' zone is kept red for other level than level 0, even if they are not... Shouldn't it be only the expired one that must be in red, and not the other ones ? If in red, we can think that it's expired, even if it's not ;-(

At your disposal.

Regards

Drag and drop files from ftp server directory to windows explorer doesn't work anymore.

The feature stopped to work for me around 3 version / 3 weeks before (at around Sept 1, 2018)

OS: Windows 10 Pro 17134.254 FileZilla client version: 3.37.1

Step to reproduce:

1. Connect to any FTP server
2. Try to drag and drop any file from ftp to desktop (or other explorer window)

The drag and drop operation fails with the following popup message: "Could not determine the target of the Drag&Drop operation. Either the shell extension is not installed properly or you didn't drop the file into an Explorer window."

re-registering the fzshellext.dll/fzshellext_64.dll doesn't help.

Maybe the problem is caused by windows and/or already know, but I haven't found it in the bug database, so better to be sure.

can't login to any of my servers

When uploading multiple folders from a Windows 7 Pro PC to a a Linux FTP Server some files are placed in the wrong folder and some files are not uploaded at all...

The attached log details a full upload of 577 files...

You can see one example of an incorrect placing in the log line: 2018-09-24 12:59:37 7140 5 Command: local:T:\!!!\sample\dir01\d1d01\d1d1d1\d1d1d1a\f038.txt => remote:/home/example/sample/dir07/d07d11/d7dbd2/f038.txt

Since I've upgraded macOS to mojave I can not move multiple items (single files or folders) from local drive to FTP server. Once I select more than 1 item FileZilla hangs or shuts down. I can transfer (by dragging) files only one by one. It takes forever. I have FileZilla client 3.37.1

I was using FileZilla 3.37.1 to download files from the server. It seemed to complete but then it gave the following messages about a bad disconnect with the server. The Response: 421 Timeout message is rather snarky.

11:33:41 Response: 421 Timeout - try typing a little faster next time

Who is it directed to? Do I need to worry about the bad disconnect?

ECONNABORTED - Connection aborted

11:25:53 Status: Starting download of /public_html/wp-includes/widgets/class-wp-widget-archives.php 11:25:53 Status: File transfer successful, transferred 2,977 bytes in 1 second 11:25:53 Status: Starting download of /public_html/wp-includes/widgets/class-wp-nav-menu-widget.php 11:25:53 Status: File transfer successful, transferred 5,597 bytes in 1 second 11:25:53 Status: File transfer successful, transferred 5,498 bytes in 1 second 11:26:53 Status: Disconnected from server 11:26:53 Status: Disconnected from server 11:33:41 Response: 421 Timeout - try typing a little faster next time 11:33:41 Error: GnuTLS error -110: The TLS connection was non-properly terminated. 11:33:41 Status: Server did not properly shut down TLS connection 11:33:41 Status: Disconnected from server: ECONNABORTED - Connection aborted

I'm seeing the compliation error below starting with filezilla client 3.37.3. 3.37.1 compiles just fine. See the attached file for the full log.

I'm building as follows:

./configure \

--prefix=/usr \ --disable-manualupdatecheck \ --disable-autoupdatecheck \ --with-pugixml=builtin \ --with-wx-config=/usr/bin/wx-config-gtk3

make

### output queue.cpp: In member function ‘void CFileItem::SetTargetFile(const wxString&)’: queue.cpp:333:71: error: no matching function for call to ‘to_wstring(const wxString&)’

m_targetFile = fz::sparse_optional<std::wstring>(fz::to_wstring(file));

In file included from /usr/include/libfilezilla/libfilezilla.hpp:7,

from ../../src/include/libfilezilla_engine.h:12, from filezilla.h:4:

/usr/include/libfilezilla/string.hpp:145:31: note: candidate: ‘std::cxx11::wstring fz::to_wstring(const string&)’

std::wstring FZ_PUBLIC_SYMBOL to_wstring(std::string const& in);

^~

/usr/include/libfilezilla/string.hpp:145:31: note: no known conversion for argument 1 from ‘const wxString’ to ‘const string&’ {aka ‘const std::cxx11::basic_string<char>&’} /usr/include/libfilezilla/string.hpp:148:38: note: candidate: ‘std::cxx11::wstring fz::to_wstring(const wstring&)’

inline std::wstring FZ_PUBLIC_SYMBOL to_wstring(std::wstring const& in) { return in; }

^~

/usr/include/libfilezilla/string.hpp:148:38: note: no known conversion for argument 1 from ‘const wxString’ to ‘const wstring&’ {aka ‘const std::cxx11::basic_string<wchar_t>&’} /usr/include/libfilezilla/string.hpp:152:98: note: candidate: ‘template<class Arg> typename std::enable_if<std::is_arithmetic<typename std::decay<_Tp>::type>::value, std::cxx11::basic_string<wchar_t> >::type fz::to_wstring(Arg&&)’

inline typename std::enable_if<std::is_arithmetic<std::decay_t<Arg>>::value, std::wstring>::type to_wstring(Arg && arg)

^~

/usr/include/libfilezilla/string.hpp:152:98: note: template argument deduction/substitution failed: /usr/include/libfilezilla/string.hpp: In substitution of ‘template<class Arg> typename std::enable_if<std::is_arithmetic<typename std::decay<_Tp>::type>::value, std::cxx11::basic_string<wchar_t> >::type fz::to_wstring(Arg&&) [with Arg = const wxString&]’: queue.cpp:333:71: required from here /usr/include/libfilezilla/string.hpp:152:98: error: no type named ‘type’ in ‘struct std::enable_if<false, std::cxx11::basic_string<wchar_t> >’ mv -f .deps/filezilla-netconfwizard.Tpo .deps/filezilla-netconfwizard.Po

Hi,

On the site panel, I have a "sent" directory into I drag and drop files that have been transferred.

When I try with V 3.37.3, the files are not moved.

Prior to today's update, I was able to drag any file from the local site window to the appropriate editor on the taskbar and have it open. This function no longer works.

I have updated to 3.37.3 and after I have started a connection to a server, FileZilla chrashes. I have tried it with a fresh installation directory, but the same happens.

Last Loglines: 2018-10-03 20:38:52 31949 1 Befehl: AUTH TLS 2018-10-03 20:38:52 31949 1 Antwort: 234 AUTH TLS OK. 2018-10-03 20:38:52 31949 1 Status: Initialisiere TLS...

If I change back to 3.36.0, all is working normal.

Sincerely, Markus

After updating Filezilla, we are observing a Bug on 'Last modified' column. Time is showing after 5 hours. For example, If we generate file on 5 pm then time showing on last modified time is 10 pm.

Since updating FileZilla yesterday,attempts to contact yield this sequence and error:

Status: Resolving address of ftp.dlfny.org Status: Connecting to 192.243.105.117:21... Status: Connection established, waiting for welcome message... Status: Logged in Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listing

I tried two connections, though they are on the same Internet host.

I'm not sure whether this all the requested info. Please let me know if more info is needed.

When the Watch locally edited files and prompt to upload modifications feature is turned on, it does not update its links when the remote server is changed. This may lead to overwriting a wrong remote file.

Consider the following scenario:

1. Connect to server A.
2. Download file X from server A to a local folder.
3. Edit the file X (right-click it in the local folder and select Edit).
4. Do some edits, save the file, close the editor and return to FileZilla.
5. You are prompted to upload modified file back to remote server A (so far so good).
6. Select ‘No’ to close the prompt.
7. Connect to server B.
8. Download file X from the server B to the same local folder as in step 2.
9. Open the new file X in your editor.
10. Do some edits, save the file, close the editor and return to FileZilla.
11. Now, you are prompted to upload modified file X back to remote server A!

That is wrong because the file was downloaded from server B and should be uploaded there. If you do not read the prompt carefully, you can easily overwrite the file at the wrong remote server. FileZilla should update its internal link when the monitored file is downloaded from a different location.

Previously I was able to select some files or directories from the Remote Site window and drag/drop them into the Queued Files. That doesn't work anymore (nothing happens). To achieve that functionality now, I need to right-click the files and choose "Add Files to Queue".

Description:

As GnuTLS >= 3.6 drops OpenPGP certificates support, when Filezilla 3.37.4 is compiled with GnuTLS >= 3.6, connection with "FTP over TLS" will fail with "GnuTLS error -50 in gnutls_priority_set_direct: The request is invalid".

Connection error detail :

Status:	Resolving address of aaa.com
Status:	Connecting to 127.0.0.1:21...
Status:	Connection established, waiting for welcome message...
Status:	Initializing TLS...
Error:	GnuTLS error -50 in gnutls_priority_set_direct: The request is invalid.
Error:	Failed to initialize TLS.
Error:	Could not connect to server

Root cause:

After searching the code, it occured in file "/engine/tlssocket_impl.cpp"

char const ciphers[] = "SECURE256:+SECURE128:-ARCFOUR-128:-3DES-CBC:-MD5:+SIGN-ALL:-SIGN-RSA-MD5:+CTYPE-X509:-CTYPE-OPENPGP:-VERS-SSL3.0";

remove "-CTYPE-OPENPGP" will solve the problem.

char const ciphers[] = "SECURE256:+SECURE128:-ARCFOUR-128:-3DES-CBC:-MD5:+SIGN-ALL:-SIGN-RSA-MD5:+CTYPE-X509:-VERS-SSL3.0";

Test method:

Assue GnuTLS >= 3.6 is compiled in /opt/filezilla3, use gnutls-cli to test priority string:

[develop@test.com ~]$ PATH=/opt/filezilla3/bin:$PATH LD_LIBRARY_PATH=/opt/filezilla3/lib64:/opt/filezilla3/lib:$LD_LIBRARY_PATH /opt/filezilla3/bin/gnutls-cli  -l --priority="SECURE256:+SECURE128:-ARCFOUR-128:-3DES-CBC:-MD5:+SIGN-ALL:-SIGN-RSA-MD5:+CTYPE-X509:-CTYPE-OPENPGP:-VERS-SSL3.0"

The result contains error:

Cipher suites for SECURE256:+SECURE128:-ARCFOUR-128:-3DES-CBC:-MD5:+SIGN-ALL:-SIGN-RSA-MD5:+CTYPE-X509:-CTYPE-OPENPGP:-VERS-SSL3.0
Syntax error at: -CTYPE-OPENPGP:-VERS-SSL3.0

remove "-CTYPE-OPENPGP":

[develop@test.com ~]$ PATH=/opt/filezilla3/bin:$PATH LD_LIBRARY_PATH=/opt/filezilla3/lib64:/opt/filezilla3/lib:$LD_LIBRARY_PATH /opt/filezilla3/bin/gnutls-cli  -l --priority="SECURE256:+SECURE128:-ARCFOUR-128:-3DES-CBC:-MD5:+SIGN-ALL:-SIGN-RSA-MD5:+CTYPE-X509:-VERS-SSL3.0"

OK:

Cipher suites for SECURE256:+SECURE128:-ARCFOUR-128:-3DES-CBC:-MD5:+SIGN-ALL:-SIGN-RSA-MD5:+CTYPE-X509:-VERS-SSL3.0
TLS_AES_256_GCM_SHA384                            	0x13, 0x02	TLS1.3
TLS_CHACHA20_POLY1305_SHA256                      	0x13, 0x03	TLS1.3
TLS_AES_128_GCM_SHA256                            	0x13, 0x01	TLS1.3
TLS_AES_128_CCM_SHA256                            	0x13, 0x04	TLS1.3
TLS_ECDHE_ECDSA_AES_256_GCM_SHA384                	0xc0, 0x2c	TLS1.2
TLS_ECDHE_ECDSA_CHACHA20_POLY1305                 	0xcc, 0xa9	TLS1.2
TLS_ECDHE_ECDSA_AES_256_CBC_SHA1                  	0xc0, 0x0a	TLS1.0
TLS_ECDHE_ECDSA_AES_256_CCM                       	0xc0, 0xad	TLS1.2
TLS_ECDHE_ECDSA_AES_128_GCM_SHA256                	0xc0, 0x2b	TLS1.2
TLS_ECDHE_ECDSA_AES_128_CBC_SHA1                  	0xc0, 0x09	TLS1.0
TLS_ECDHE_ECDSA_AES_128_CCM                       	0xc0, 0xac	TLS1.2
TLS_ECDHE_RSA_AES_256_GCM_SHA384                  	0xc0, 0x30	TLS1.2
TLS_ECDHE_RSA_CHACHA20_POLY1305                   	0xcc, 0xa8	TLS1.2
TLS_ECDHE_RSA_AES_256_CBC_SHA1                    	0xc0, 0x14	TLS1.0
TLS_ECDHE_RSA_AES_128_GCM_SHA256                  	0xc0, 0x2f	TLS1.2
TLS_ECDHE_RSA_AES_128_CBC_SHA1                    	0xc0, 0x13	TLS1.0
TLS_RSA_AES_256_GCM_SHA384                        	0x00, 0x9d	TLS1.2
TLS_RSA_AES_256_CBC_SHA1                          	0x00, 0x35	TLS1.0
TLS_RSA_AES_256_CCM                               	0xc0, 0x9d	TLS1.2
TLS_RSA_AES_128_GCM_SHA256                        	0x00, 0x9c	TLS1.2
TLS_RSA_AES_128_CBC_SHA1                          	0x00, 0x2f	TLS1.0
TLS_RSA_AES_128_CCM                               	0xc0, 0x9c	TLS1.2
TLS_DHE_RSA_AES_256_GCM_SHA384                    	0x00, 0x9f	TLS1.2
TLS_DHE_RSA_CHACHA20_POLY1305                     	0xcc, 0xaa	TLS1.2
TLS_DHE_RSA_AES_256_CBC_SHA1                      	0x00, 0x39	TLS1.0
TLS_DHE_RSA_AES_256_CCM                           	0xc0, 0x9f	TLS1.2
TLS_DHE_RSA_AES_128_GCM_SHA256                    	0x00, 0x9e	TLS1.2
TLS_DHE_RSA_AES_128_CBC_SHA1                      	0x00, 0x33	TLS1.0
TLS_DHE_RSA_AES_128_CCM                           	0xc0, 0x9e	TLS1.2

Protocols: VERS-TLS1.3, VERS-TLS1.2, VERS-TLS1.1, VERS-TLS1.0, VERS-DTLS1.2, VERS-DTLS1.0
Ciphers: AES-256-GCM, CHACHA20-POLY1305, AES-256-CBC, AES-256-CCM, AES-128-GCM, AES-128-CBC, AES-128-CCM
MACs: AEAD, SHA1
Key Exchange Algorithms: ECDHE-ECDSA, ECDHE-RSA, RSA, DHE-RSA
Groups: GROUP-SECP384R1, GROUP-SECP521R1, GROUP-FFDHE8192, GROUP-SECP256R1, GROUP-X25519, GROUP-FFDHE2048, GROUP-FFDHE3072, GROUP-FFDHE4096, GROUP-FFDHE6144
PK-signatures: SIGN-RSA-SHA384, SIGN-RSA-PSS-SHA384, SIGN-RSA-PSS-RSAE-SHA384, SIGN-ECDSA-SHA384, SIGN-ECDSA-SECP384R1-SHA384, SIGN-RSA-SHA512, SIGN-RSA-PSS-SHA512, SIGN-RSA-PSS-RSAE-SHA512, SIGN-ECDSA-SHA512, SIGN-ECDSA-SECP521R1-SHA512, SIGN-RSA-SHA256, SIGN-RSA-PSS-SHA256, SIGN-RSA-PSS-RSAE-SHA256, SIGN-ECDSA-SHA256, SIGN-ECDSA-SECP256R1-SHA256, SIGN-EdDSA-Ed25519, SIGN-RSA-SHA1, SIGN-ECDSA-SHA1

Link:

​https://www.gnutls.org/manual/html_node/OpenPGP-certificates.html

I just run into a problem when downloading (via sftp) multiple files simultaneously. When starting to precess the queue, the filezilla client crash after a few seconds. When downloading a singe file, there is no problem. It's reproducible, I've tried this three times (rebooted the system between, etc.).

After downgrade to 3.37.4 (win64) all is fine again.

This error message began with version 3.37.4 and continues with new version 3.38.1. What does it mean and how do I fix it. Thanks...Peter

Filezilla ENETUNREACH error during FTP persists, even after adding Kaspersky exclusions to filezilla.exec. Please make previous Filezilla Client releases available even though they're not supported. Everything worked fine before I updated the Filezilla release.

Downloading a WP installation from a plesk server using no encryption (insecure) resulted in several of its core and plugin files downloaded with what I assume is some sort of binary/invalid data in them along plain text. Samples of the affected files include .CSS and .PHP files.

Attempting to copy the contents (copy-paste) results in truncated data up to the point of corruption.

There were no errors or warnings displayed on the log area during download.

Damage occurred during download and corrupted data was uploaded 'successfully' in that is seems to match the corrupted data.

A second attempt to download the same WP installation resulted in errors on the same files but damaged data occurred at different locations.

The sample files:

/blog/wp-content/plugins/amazon-s3-and-cloudfront/vendor/Aws3/aws-autoloader.php /blog/wp-includes/css/dashicons.css

If I edit a local file selecting it from "Local site" pane, when I save the local file, Filezilla shows an alert box with the message "A file previously opened has been changed" and tries to upload it to the remote server.

I have tried to close Filezilla and open it again but the problem continues.

I have used phpDesigner 8.2 and Sublime Text 3.1.1 to edit the file and the result is the same.

• Open a local app such as Microsoft Paint
• Drag an image file (*.png or *.jpg) from FileZilla's local folder tree to this app
• The file can not be opened. An error message is displayed "C:\Windows\system32\XXX was not found

Replace XXX by some asian characters (I am not able to type them)

Similar issue with a different file:

• Open a local app such as Notepad++
• Drag an text file (*.txt) from FileZilla's local folder tree to this app
• The file can not be opened. Nothing happens.

I purchased Filezilla Pro so I could test out connectivity to our Openstack Swift storage ( we host three clusters around the world for our end users). I immediately run into an issue. We use Openstack Swift with the keystone identity service, with v2.0 being our standard identity protocol.

When I entered my project (aka tenent) and username and then hit connect, I got the following output:

00:47:34 Status: Resolving address of lax-staging.identity.example.com 00:47:34 Status: Connecting to 173.0.160.18:443... 00:47:34 Status: Connection established, initializing TLS... 00:47:34 Status: Verifying certificate... 00:47:34 Status: TLS connection established, sending HTTP request 00:47:35 Status: Resolving address of lax-staging.identity.example.com 00:47:35 Status: Connecting to x.x.x.x:443... 00:47:35 Status: Connection established, initializing TLS... 00:47:35 Status: Verifying certificate... 00:47:35 Status: TLS connection established, sending HTTP request 00:47:35 Command: POST /v2.0/tokens HTTP/1.1 00:47:35 Command: Connection: close 00:47:35 Command: Content-Length: 110 00:47:35 Command: Content-Type: application/json 00:47:35 Command: Host: lax-staging.identity.example.com:443 00:47:35 Command: User-Agent: FileZilla/3.38.1 00:47:35 Response: HTTP/1.1 200 OK 00:47:35 Response: Server: nginx/1.10.3 (Ubuntu) 00:47:35 Response: Date: Tue, 20 Nov 2018 08:47:35 GMT 00:47:35 Response: Content-Type: application/json 00:47:35 Response: Content-Length: 1508 00:47:35 Response: Connection: close 00:47:35 Response: Vary: X-Auth-Token 00:47:35 Response: X-Distribution: Ubuntu 00:47:35 Response: x-openstack-request-id: req-f760215c-4537-4ea8-8b17-05aca427fc 00:47:35 Error: Identity service did not return an auth token

If I typo the API KEY ( aka password) , I get 401. With all correct details, I get 200 OK as above, but it claims not to have a token, but it is returned. I've used Wireshark with the SSL decryption to confirm this.

The following JSON response was sent to Filezilla (I have changed the values but none of the keys ):

{"access": {"token": {"issued_at": "2018-11-20T08:28:45.000000Z", "expires": "2018-11-20T09:28:45.000000Z", "id": “blahbljbkgjbaekjrbgklaebgkjebgkjerbgejrkbgjkebgejkbg", "tenant": {"description": null, "enabled": true, "id": "6a4d4ca0536240a1b982391c88f0ec68", "name": “example"}, "audit_ids": [“Yrad3a_yx1e3l34"]}, "serviceCatalog": [{"endpoints": [{"adminURL": "​https://lax-proxy-staging.example.com", "region": "LAX", "internalURL": "​https://lax-proxy-staging.example.com/v1/AUTH_6a4d4ca0536240a1b982391c88f0ec68", "id": "ccb6cd9aba0f452db42b3d4f4a2c049e", "publicURL": "​https://lax-proxy-staging.example.com/v1/AUTH_b4e0f1ca0536240a1b982398"}], "endpoints_links": [], "type": "object-store", "name": "swift"}, {"endpoints": [{"adminURL": "​https://lax-staging.identity.example.com:35357/v2.0/", "region": "LAX", "internalURL": "​https://lax-staging.identity.example.com/v2.0/", "id": "4213934b23294a96b2b8c553dcf00551", "publicURL": "​https://lax-staging.identity.example.com/v2.0/"}], "endpoints_links": [], "type": "identity", "name": "keystone"}], "user": {"username": “david", "roles_links": [], "id": "4fae2db21d492881a68e4fe", "roles": [{"name": "_member_"}, {"name": "SwiftOperator"}], "name": “david"}, "metadata": {"is_admin": 0, "roles": ["9fe2ff9ee4384b1894a90878", "f3cdc7048c9945c56e108372"]}}}

'access' => 'tokens' => 'id' is the path to the valid token that would be accepted by swift for future requests ( as X-Auth-Token).

Dear Filezilla,

1. Since the last but one update version of Filezilla I have been unable to connect to my FTP Host at 1&1; prior to this update all was working fine. I have checked my connection parameters and all are correct. I have also downloaded another FTP Client (CoreFTP LE) this morning and applied the same parameters and that is working fine connecting to my FTP Host without problems. The connection failure is shown below:

Status: Connecting to home163432264.1and1-data.host... Response: fzSftp started, protocol_version=8 Command: open "u40428120@…" 22 Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server Status: Waiting to retry... Status: Connecting to home163432264.1and1-data.host... Response: fzSftp started, protocol_version=8 Command: open "u40428120@…" 22 Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server

2. Also, Filezilla fails on Checking for Updates with the message "Information about the latest version of Filezilla could not be retrieved. Please try again later.". My Internet connection is working fine in both Chrome and Firefox and also in Opera; and works fine with CoreFTP LE.

I urgently need Filezilla to upload changes to my websites. Anything you can suggest would be gratefully received. I have tried uninstalling Filezilla and reinstalling from scratch with a complete reset of parameters to no avail.

Cheers and thanks, Steve J. McWilliam

Since updating to the latest FileZilla, I am unable to use regular expressions with quick search. In the past, I would search for files using RegEx like so: 18121[7-9]|18122[0-3] This would filter all files with names except 181217 through 181223. Now when I try this, no files are shown. Thanks for any help.

Configuration files are not shown anymore. I created a file .text. It is not shown. I tried to create again. I get the message, file already exists.

When editing a file by double-clic (using Notepad++), after saving changes and switch to FileZilla, it displays a wrong path and uses that wrong path to upload the file.

e.g. Local path C:\wamp64\www\cloud\i\bibliotecas\181224\plantillas\tienda\.producto(product-detail).php

Correct remote path: /var/www/i/bibliotecas/181224/plantillas/tienda/.producto(product-detail).php

Incorrect remote path /var/www/i/bibliotecas/.producto(product-detail).php

Started update check on 2019-01-01 18:44:06 Own build type: custom Downloading /update.php?platform=x86_64-pc-linux-gnu&version=3.33.0&cpuid=sse,sse2,sse3,ssse3,sse4.1,sse4.2,avx,aes,pclmulqdq,rdrnd&initial=1 Resolving address of update.filezilla-project.org Connecting to [2a01:4f8:171:1ce9::4]:443... Connection established, initializing TLS... GnuTLS error -50 in gnutls_priority_set_direct: The request is invalid. Failed to initialize TLS. File transfer failed

How to reproduce:

1. Create a local file, for example 'index.html'
2. Create a remote file with the same name
3. Drag the file from the local directory to the remote directory (to copy the file)
4. FileZilla detects that there's already a file called 'index.html'. It will ask what you want. Choose 'Rename' and click OK.
5. A Rename File dialog is opened. The remote path should be [RemoteDir]/[Filename], however, the slash is missing.

Happy new year :-)

Auf dem Rechner geänderte Dateien werden im FZ-Fenster "Lokal" nicht aktualisiert.

Cannot export bookmarks, selecting File>Export causes program crash immediately after the export options dialog window opens.

Does not affect other Filezilla copies that may be open at the same time.

FileZilla Client

Version: 3.39.0

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2018-11-30 Compiled with: x86_64-w64-mingw32-gcc (GCC) 6.3.0 20170516 Compiler flags: -g -O2 -Wall

Linked against:

wxWidgets: 3.0.5 SQLite: 3.22.0 GnuTLS: 3.5.19

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi2 bmi2 lm Settings dir: C:\Users\West Fork\AppData\Roaming\FileZilla\

I use the app switcher (CMD+Tab) to switch between applications on MacOS. However, I've noticed recently that FileZilla no longer shows up on the list of running applications on the app switcher.

This means I have to have it visible, so that I can click in the app, or I have to click on the app in the task bar so that I can find it again.

In the transfer queue, if I rearrange the columns during a transfer, the direction arrows don't follow the source -> destination.

In the attached screenshot, I'm downloading files but, after rearranging the columns to match where I have my Remote and Local views, the arrows in the "Direction" column make it look like I'm uploading.

Love the program! Thank you!

Since the last version I can't edit files when I double clic on a file in the "server" columne. Before the last version I had no problem. It seems that the file is download but the associated program is don't launched, I have try to force the association for files with no success.

The problem occured after the update from 3.34.0. All later versions have problems with memory management, including most recent 3.40.0. The program keeps running in the background and can only be closed to start a new session after Ctrl-Alt-Del and ending the process manualy.

This behavior is always when an connection can not be made or when the transfer is interupted. After that is is not possible to open a new connection without closing the progrma and manualy ending the process in memory.

An other report mentions the same behavoir. That describes this while updating the version. That happens with me also.

Error Program opens and connects to a remote Linux server successfully using SFTP on custom SSH port. Files dragged to destination and upon successful transfer of the entire queue the program immediately closes. No error messages in log file even in full debug mode. The program then has to be reopened to do more transfers.

I updated the FileZilla client to 3.41.0 this morning and am experiencing an issue during the directory retrieval process on 1 particular server. I regularly connect to about 12 different FTP servers on a daily basis and this is the only one giving me any issue.

Because of the sensitivity of information, I have obfuscated the host name, IP, username, and password in this public post. Happy to PM it to a tech for analysis if needed.

Status: Resolving address of ftp1.thehostname.com Status: Connecting to #.#.#.#:21... Status: Connection established, waiting for welcome message... Response: 220 TheRDNS.hostname.us Command: AUTH TLS Response: 500 AUTH not understood Command: AUTH SSL Response: 500 AUTH not understood Status: Insecure server, it does not support FTP over TLS. Command: USER * Response: 331 Password required for * Command: PASS Response: 230 User * logged in Status: Server does not support non-ASCII characters. Status: Logged in Status: Retrieving directory listing of "/ZZZ Mr Master/CDN Files delivered"... Command: CWD /ZZZ Mr Master/CDN Files delivered Response: 250 CWD command successful Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode. (#,#,#,#,68,229) Command: MLSD Response: 150 Opening ASCII mode data connection for MLSD Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listing

I have tried removing the remote directory that I am specifying in the site manager to land into, have tried forcing passive and active mode rather than auto-detect, have tried forcing UTF-8 instead of auto-detect, have tried checking bypass proxy, and have tried ALL available server types rather than auto-detect.

So far nothing has worked.

I can confirm that if I connect to this site from the command prompt ftp in windows 10 I am able to successfully connect and retrieve a directory listing.

I have inquired from the host as to what OS, FTP server, and version they are running to try to get more information. I'll update this ticket as I get more info.

I am certainly not alone as another user entered the IRC channel a little while ago with the identical issue, but he left before I was able to ask any questions.

I have used Filezilla in the past to ftp to Mozilla.org's ftp site.I believe that the change in Mozilla ftp server prevents Filezilla from connecting to it now. I didn't put a wireshark packet trace on it but I can if needed to support this ticket. I'm not sure if the mozilla change makes this a feature request or just a bug.

Just downloaded/install 3.41.1 My virus checker found the following attached problem

I was deleting an empty folder called ~ through FileZilla.

However, I started to notice that it was taking way too long to delete 8KB. When I looked at the logs, I saw that it was deleting all files in /home/<user>/... instead o /home/<user>/<path>/~.

Sadly, the damage had been done. I'm filling this bug report so this may not happen to anyone else.

I almost did this myself in the console, before I realized I had to use ./~ instead of ~. I'm not sure how FTP works overall, but a possible fix may be to always include ./ or the full path... no idea though.

Ha ocurrido un error guardando la cola de transferencia en C:\Users\Crlos\AppData\Roaming\File\queue.sqlie3 Algunos objetos de la cola podrian no haberse guardado.

The display of the file/directory ownership on the server is incorrect. The FTP authorisation flags (eg. fle or flcdmpe) seems correct. In the appended screen print, all owners appear to be ftp:ftp, but of directory test it is actually root:root.

Not sure the error is in the Client part (or what trade the Server part is).

Error message my customer is getting is This server does not support FTP over TLS. If you continue, your password and files will be sent in clear over the internet.

Please advise

Thanks Ryan

SHA512 from FileZilla- 6304c0d314c5bbe3af89c0abf579f54f9aa429cd00aca9edab0cebe2d61ff5322fe2ca11a2d24e41cabb4fabefdc2dd9861856a52f73360db90ca746cb28b659

SHA512 from Donwloaded File- 009E6F174E0394203ADCECD760592F4C8830225E3ACF0D93B2FA4FD7757212F583C247835D10CCD94AA35758F93F0EADE971452B8F300973CEDA35E817CFF770

Please verify current downloaded file is not corrupt or altered.

i am just update from 3.41.0 to 3.42.0 and have a little bug just know i am using google drive to upload file and when i click to team drive !st ok and when i click a folder is geting error and now i start to install the old version 3.37 please give me the link for 3.41.0 that is for me until abug being repair regards

I upgraded from 3.42.0 to 3.42.1 using FileZilla_3.42.1_macosx-x86_sponsored-setup.dmg and get the error that FileZilla 3.42.1 doesn't work with MacOS 10.13.6, required 10.14 or later. I'm using 10.13.6; 3.42.0 worked fine. The downloads page says "Requires OS X 10.9 or newer", https://filezilla-project.org/download.php?type=client. The release notes for 3.42.1 says it fixed a bug about compatibility with 10.13. However, the fix apparently made it impossible to work with 10.13. Does FileZilla no longer work with Mac OS X 10.13.6, or is a bug fix in the offing?

when trying to open any other directory other than desktop in filezilla pro for mac version 3.42.1.

when trying to load something like the download folder i can't even see anything in my parent folder. i have tried to locate the folder my manually typing in /Users/*NAME*/Download/ or /Users/cadetbester/Music/ both of which do not show the files that should be there.

After a transfer has completed, the filezilla icon appears in the Windows 7 System Tray and displays a bubble indicating the transfers have completed. After you exit the application, the icon still remains visible in the system tray. To get rid of it, you need to mouse over it.

In the generated file src/interface/Makefile.in, there is not "--tag=CXX" argument in the filezilla_LINK variable, which makes linking fail in my environment because libtool complains about the missing tag.

I see that there are tries to add it in the corresponding Makefile.am but it's perhaps in the wrong variable? Anyway, I need the attached patch to compile filezilla.

When I change the priority of a file in the queue it is not recognized. As one file finishes the next file on the list is taken regardless of other files where the priority was set to "high"

FileZilla Client

Version: 3.42.1

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2019-05-08 Compiled with: x86_64-w64-mingw32-gcc (GCC) 6.3.0 20170516 Compiler flags: -g -O2 -Wall

Linked against:

wxWidgets: 3.0.5 SQLite: 3.26.0 GnuTLS: 3.6.7

Operating system:

Name: Windows 10 (build 17763), 64-bit edition Version: 10.0 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi2 bmi2 lm

Client is unable to connect via HTTP proxy, it gets stuck at "performing handshake". I've been able to do it using the same proxy on earlier FileZilla client versions (WinSCP is working too).

Here are the debug messages:

Status:	Connecting to <<ftp_server>> through HTTP proxy
Status:	Resolving address of <<proxy_dns>>
Status:	Connecting to <<proxy_ip:port>>...
Status:	Connection with proxy established, performing handshake...
Error:	Connection timed out after 60 seconds of inactivity
Error:	Could not connect to server
Status:	Waiting to retry...
Status:	Connecting to <<ftp_server>> through HTTP proxy
Status:	Resolving address of <<proxy_dns>>
Status:	Connecting to <<proxy_ip:port>>...
Status:	Connection with proxy established, performing handshake...
Error:	Connection timed out after 60 seconds of inactivity
Error:	Could not connect to server
Status:	Disconnected from server
Status:	Connecting to <<ftp_server>> through HTTP proxy
Status:	Resolving address of <<proxy_dns>>
Status:	Connecting to <<proxy_ip:port>>...
Status:	Connection with proxy established, performing handshake...
Error:	Connection attempt interrupted by user
Status:	Disconnected from server
Status:	Connecting to <<ftp_server>> through HTTP proxy
Status:	Resolving address of <<proxy_dns>>
Status:	Connecting to <<proxy_ip:port>>...
Status:	Connection with proxy established, performing handshake...
Error:	Connection attempt interrupted by user
Status:	Disconnected from server
Trace:	CRealControlSocket::DoClose(66)
Trace:	CControlSocket::DoClose(66)
Trace:	CRealControlSocket::DoClose(66)
Trace:	CControlSocket::DoClose(66)
Trace:	CControlSocket::DoClose(66)
Trace:	CFileZillaEnginePrivate::ResetOperation(0)
Trace:	CControlSocket::SendNextCommand()
Trace:	CFtpLogonOpData::Send() in state 0
Status:	Connecting to <<ftp_server>> through HTTP proxy
Status:	Resolving address of <<proxy_dns>>
Status:	Connecting to <<proxy_ip:port>>...
Status:	Connection with proxy established, performing handshake...
Error:	Connection timed out after 60 seconds of inactivity
Trace:	CRealControlSocket::DoClose(2050)
Trace:	CControlSocket::DoClose(2050)
Trace:	CFtpControlSocket::ResetOperation(2114)
Trace:	CControlSocket::ResetOperation(2114)
Trace:	CFtpLogonOpData::Reset(2114) in state 1
Error:	Could not connect to server
Trace:	CFileZillaEnginePrivate::ResetOperation(2114)
Status:	Waiting to retry...
Trace:	CRealControlSocket::DoClose(66)
Trace:	CControlSocket::DoClose(66)
Trace:	CControlSocket::DoClose(66)
Trace:	CControlSocket::SendNextCommand()
Trace:	CFtpLogonOpData::Send() in state 0
Status:	Connecting to <<ftp_server>> through HTTP proxy
Status:	Resolving address of <<proxy_dns>>
Status:	Connecting to <<proxy_ip:port>>...
Status:	Connection with proxy established, performing handshake...
Error:	Connection timed out after 60 seconds of inactivity
Trace:	CRealControlSocket::DoClose(2050)
Trace:	CControlSocket::DoClose(2050)
Trace:	CFtpControlSocket::ResetOperation(2114)
Trace:	CControlSocket::ResetOperation(2114)
Trace:	CFtpLogonOpData::Reset(2114) in state 1
Error:	Could not connect to server
Trace:	CFileZillaEnginePrivate::ResetOperation(2114)

I'm on version 3.41.2. I can't report a bug without upgrading to 3.42.1. When I upgrade it wants me to load 3rd party virus protection software. My company doesn't allow that, so I cancel out of it and it doesn't install the software. So I can't report the bug. Which is by the way, Filezila runs at system startup and I don't want it to. And I can't find it in the startup files. My only option at this point is to uninstall it, and install it when I want to run it. Pretty lame stuff.

Thanks, Peter

I'm getting the following error when I try to navigate to the /var/www/ directory on my localhost:

Failed to change directory
'/var/www/' does not exist or cannot be accessed.

I can access the /home directory just fine, but that's not where my website lives locally.

I'm using the latest FileZilla flakpak from flathub.org (version 3.42.1) on Fedora 30. The error isn't SELinux related (I'm getting the same result in permissive mode).

Filezilla doesn't remember that I've told it to "Always allow insecure plain FTP for this server"

This happens if the site is configured as default, to use TLS if available. I would expect the warning to stop if I check the box on a server that will never support TLS. The checkbox does nothing.

It does appear to stop warning if you go in site manager and change it to use plain FTP only.

3.43.0

I am running a local min.io s3 server on my local network and FileZilla Pro can not connect to it.

I set the hostname to my min.io s3 server network IP address but I can see in the access logs that FZ ignores my host entry and simply uses an Amazon address instead which of course fails.

The host IP address is entered in the "Host:" box as 192.168.0.43 and Port: 9000 however FZ Pro shows that it is trying to access a different server: Retrieving directory listing... Status: Resolving address of s3.dualstack.us-east-1.amazonaws.com Status: Connecting to 52.216.9.37:9000... Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listing ... so it looks like it has used my port number but ignored my host IP address and used something from AWS or something internal instead. This seems to be a bug because it is entirely reasonable to expect "Host:" to allow me to connect to a s3 server at my own IP address.

My app and mac details are: FileZilla Pro

Version: 3.43.0

Build information:

Compiled for: x86_64-apple-darwin18.6.0 Compiled on: x86_64-apple-darwin18.6.0 Build date: 2019-06-27 Compiled with: Apple LLVM version 10.0.1 (clang-1001.0.46.4) Compiler flags: -Werror=partial-availability -Wall -g

Linked against:

wxWidgets: 3.0.5 SQLite: 3.26.0 GnuTLS: 3.6.7

Operating system:

Name: Mac OS X (Darwin 18.6.0 x86_64) Version: 10.14 CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi2 bmi2 adx lm Settings dir: /Users/richardj/.config/filezilla/

Download and add files to queue are greyed out

The whole problem is that if two files are named the same. e.g. rules.php and one is on the remote server and the other on the local disk, then editing this on the local disk causes that it overwrites the remote server file.

Hello,

The "Remember password until FileZilla is closed" checkbox used to be automatically ticked by default if this option was enabled last time the dialog was shown.

It doesn't seem to be the case anymore since version 3.44. Is it a bug or a feature (that would be too bad)?

Best regards, Underground78

Hi, We manage a forum phpbb with filezilla and we can't get in. This morning, no problem, but now we have this "error 530" and we don't know why (we didn't do anything). We are trying from two separated computer (one in belgium, one in france, one windows, one mac), so we don't find any answer to this issue. Can you help us ? We are stucked.