Custom Query (4044 matches)

Hi,

I use Resume action when file already exist. 2 times, on even file of 170 mo (movie), the number of octet downloaded is more larger than the initial size. The process not stop (10 or 20 mo more).

There is a specific site that I cannot retrieve the directory listing of, and as such am forced to use an alternate FTP Client (LeechFTP)

Filezilla is my favorite, and works in every instance besides this specific case.

The following is the trace information (URL,IP, and Username Removed):

Status: Resolving address of www.sitenamehere.com Status: Connecting to IPHERE:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220 Welcome to Brabys.com FTP Trace: CFtpControlSocket::SendNextCommand() Command: USER jolene Trace: CFtpControlSocket::OnReceive() Response: 331 Password required for usernameHere Trace: CFtpControlSocket::SendNextCommand() Command: PASS Trace: CFtpControlSocket::OnReceive() Response: 230 Logged on Trace: CFtpControlSocket::SendNextCommand() Command: SYST Trace: CFtpControlSocket::OnReceive() Response: 215 UNIX emulated by FileZilla Trace: CFtpControlSocket::SendNextCommand() Command: FEAT Trace: CFtpControlSocket::OnReceive() Response: 211-Features: Trace: CFtpControlSocket::OnReceive() Response: MDTM Response: REST STREAM Response: SIZE Trace: CFtpControlSocket::OnReceive() Response: MLST type*;size*;modify*; Response: MLSD Response: UTF8 Response: CLNT Response: MFMT Response: 211 End Status: Connected Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Retrieving directory listing... Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/" is current directory. Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: TYPE I Trace: CFtpControlSocket::OnReceive() Response: 200 Type set to I Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (196,34,149,71,207,158) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: MLSD Trace: CTransferSocket::OnConnect Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 425 Can't open data connection. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Error: Failed to retrieve directory listing

If any more details are required, they can be supplied.

Enjoy your day!

• Reelix

When I try to upload a file and they alredy exists I can see the options in both languages.

I consider this a bug, but you may consider it a 'feature request'. Here is the break down of what happens.

I have many many sites saved in the Site Manage, when I click the down arrow on the Site Manage icon, I have a list so long that I can't see any of the sites past 't' in the list.

There is an arrow on the top of the list, but not on on the bottom to scroll down the list.

For sites below 't' I have to go into the site manager and click connect.

Not a huge deal, but I would LOVE to see a version update that included this feature/bug fix. As it would make my life a tad bit easier.

FileZilla client shows empty dir listing in a non-empty directory on AIX. This happens approximately 9 times out of 10 if I repeatedly hit the refresh (F5). Sometimes it comes back with incomplete listing.

To me this sounds like a timing issue.

My local system is Windows XP. Remote host runs AIX.

uname -a

AIX ret4a046 3 5 00C1E7C04C00 unknown unknown AIX

Here is the help/about dump:

FileZilla Client

Version: 3.2.8.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2009-10-10 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.10 GnuTLS: 2.8.3

Here is the log, although it does not show any errors:

Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,47) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,48) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,49) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,50) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,51) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,52) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,54) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,55) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,56) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,57) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,58) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,59) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,60) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,61) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,62) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,63) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,65) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,66) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,67) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,68) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,69) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,70) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,71) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,72) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,73) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,74) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,75) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,76) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,77) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,78) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,80) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (155,180,228,45,177,81) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for /bin/ls. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Trace: CFtpControlSocket::OnReceive() Response: 421 Timeout (900 seconds): closing control connection. Trace: Unexpected reply, no reply was pending. Trace: CRealControlSocket::OnClose(0) Error: Connection closed by server Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66)

After opening a new tab, trying to change the layout under Settings > Interface > Layout to Explorer, shows the Widescreen layout instead.

3.0.0-beta1

Suggest adding the following enhancements to navigation of tabs:

ctrl-tab should wrap around from the last tab to the first, vice versa for shift-ctrl-tab

ctrl-pgup/ctrl-pgdn should also switch tab, per Windows convetion

rolling the mousewheel over the tab bar should also switch tab -- not convention, but used in a few apps and very useful :)

These two toggles (Remote and Local Directory Tree Toggle) are located in the top bar under the Main Menu Bar. They both have a weird behavior. Both were OFF upon start.

The weird behavior appears as soon as the tabbed interface is activated or a little later on while using it.

This behavior is characterized by:

• Clicking the button indents it (visual active state) but the panels for remote directory/local directory tree do not appear.
• The buttons do not respond to any further requests once in this state.

I am using the latest version of filezilla (updated 10 min ago.)

I have restarted filezilla and the buttons work again until I create a new tab. Unless now only the "remote directory tree" is affected by the bug. The local directory switch works properly. Then I create a new tab once again and both toggles work properly again. Then again I leave one tab open (the tab-panel disappears) and create a new tab - the problems appear again.

Truly a strange thing.

Here is the About Filezilla Information:

FileZilla Client

Version: 3.3.0

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2009-11-09 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.10 GnuTLS: 2.8.3

Download set to auto resume, queue the file twice, then start download. it will download in 2 different thread, to the same location, same local file(auto rename disabled). the result file is corrupt. Using FIlezilla 3.3.0.1

Hi,

Since the 3 last versions (3.3.0.1, 3.3.0 and 3.2.8.1), from time time, when I download from my server (Ubuntu Desktop 8.04) a list of files, the download stops without any error message and without reason. I just do a right click, then uncheck 'Traiter la file d'attente' and then recheck and the download restart until it stops again at a later time, on the same file or not. I was unable to focus a type of file, a file size or something.

I never have this problem with the 3.2.8 and previous versions.

FileZilla Client

Version: 3.3.0.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2009-11-15 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.10 GnuTLS: 2.8.3

Every time I download a file, it gets to 100% and then stays there. I have used checksums to verify that the download has completed and then remove the download but when I add a new one it says: "ftpcontrolsocket.cpp(1819): Waiting for replies to skip before sending next command... caller=0p2e53e08" this happens in version 3.3.0.1 on Windows and Linux ( the caller is different under linux)

Hello I am running windows 7 and was using version 3.2.8.1 which was working OK, then I upgraded to 3.3.0.1 and it ran after the upgrade. But after closing the program, I always get the message missing mingvw10.dll and please reinstall the program. The mingvm10.dll is in the FileZilla folder. I have tried to reinstall the old version and now I have the same problem. I have to reinstall the program to get it to work one time.

Any Ideas?

Thanks

Ray

Error: Critical error Error: Could not connect to server

This happens while the logon process to several servers since the update to 3.3.0.1

FileZilla Client

Version: 3.3.0.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2009-11-15 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.10 GnuTLS: 2.8.3

i wish to connect to my host trough a computer in my college which is powered by server. i tried to connect through normally it failed with error messsage 'NOEIONAME', it may spelled wrong but some thing like that .is there is any other way to conect to my host through my college systems b'coz they r using high speed broadband help fixing this bug.

hi, when i type filezilla in terminal it opens unstable and terminates with "Segmentation fault" stderr; i know i could chroot and set W/D to /user/lib/filezilla3 ( though never tried that )

just an unexpected behavior, not a bug

Pressing TAB cycles the keyboard focus between the UI elements of the screen, including the Quickconnect toolbar, Local site and Remote site paths, directory trees, and file lists.

Pressing CTRL+TAB should change tabs, but instead it functions the same as TAB, until/unless the focus is currently on the Local site or Remote site path fields, at which point it functions normally until focus changes.

The previous version worked fine. I should have kept it. When I install version 3.3.1 it works fine - once. The next time I try to use it, I get the error, "The application has failed to start because mingwm10.dll was not found. Re-installing the application may fix this problem."

I re-install 3.3.1 and it works - once. Then I have to go through this process again. Why is this happening?

I use Windows XP Media Center Edition 2005 with all updates applied except Service Pack 3.

Bob Pegram San Jose, CA

Add a site via Site Manager and the password is stored in the sitemanager.xml file in plain text:

<Server>

<Host>testhost</Host> <Port>21</Port> <Protocol>0</Protocol> <Type>0</Type> <User>testuser</User> <Pass>testpwd</Pass> <Logontype>1</Logontype> <TimezoneOffset>0</TimezoneOffset> <PasvMode>MODE_DEFAULT</PasvMode> <MaximumMultipleConnections>0</MaximumMultipleConnections> <EncodingType>Auto</EncodingType> <BypassProxy>0</BypassProxy> <Name>test_security</Name> <Comments /> <LocalDir /> <RemoteDir /> <SyncBrowsing>0</SyncBrowsing> test_security </Server>

Build information: Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2010-01-03 Compiled with: i586-mingw32msvc-gcc(GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against: wxWidgets: 2.8.10 GnuTLS: 2.8.3

When selecting multiple files or folders using Ctrl+Shift in the local or server file browser, the number of Selected files/folders is shown wrong. It seems that the real number of selected files is just added to the previously displayed number of selected files.

Example: Selected 3 files e.g. using Shift (FZ displays "Selected 3 files."). If you go on selecting 2 more files with Ctrl+Shift there are 5 files selected but FZ shows "Selected 8 files." (5 real + 3 form before). Go on selecting 2 more files, FZ shows "Selected 15 files." (7 real + 8 thought from before). And so on..

Version: 3.3.1

(Screenshot attached)

while dragging files to move them to another folder, if the target folder is above on the list (for instance "..") the panel listing the does not scroll to the top even if you drag near the top (or bottom) of the panel

On a side note: Love your work and been with you for years and will be a whole lot more. Keep up the excellent work

After downloading and starting the new setup for version 3.3.1, I got a dialog window with inconsistent dutch language. (I guess the version number is irrelevant here.)

Controleren op updates

​http://downloads.sourceforge.net/filezilla/FileZilla_3.3.1_win32-setup.exe downloaden

Bestandsoverdracht succesvol

De nieuwste versie is gedownload. Klik op 'Voltooien' om FileZilla af te sluiten en de installatie te starten.

[ < Vorige ] [ Afronden ] [ Annuleren ]

It says "Click on button 'Voltooien'" and then shows the (corresponding) button 'Afronden'. See attached file

This is what I'm getting. I have updated my router and uninstalled my Norton 360. Please help.

Connecting to probe.filezilla-project.org Response: 220 FZ router and firewall tester ready USER FileZilla Response: 331 Give any password. PASS 3.3.1 Response: 230 logged on. Checking for correct external IP address Retrieving external IP address from ​http://ip.filezilla-project.org/ip.php Checking for correct external IP address IP 67.186.178.115 gh-big-bhi-bbf Response: 200 OK PREP 49240 Response: 200 Using port 49240, data token 1037870087 PORT 67,186,178,115,192,88 Response: 200 PORT command successful LIST Response: 150 opening data connection Response: 503 Failure of data connection. Server sent unexpected reply. Connection closed

Hi, I am using FileZilla on Windows 7, I was transfering many files to my FTP Server. Mostly small files, but few big ones. After all small files are transfered one of the Big files left. The Speedmeter isn't korrekt from that moment. Its as small as while the Uploadbandwith ist divided by multiple transfers, but now there is only one. In my taskmanager i can see that the full bandwith is used, but not showed in the Speedmeter in the Filezilla transferlist. It's growing but slow! I think you have to improve the calculation of the actual Speed, if there are big differences in short time.

Hello,

It's impossible to list directory : Commande : CWD /AAAA - AAAA (AAAAA) [March 18, 2010] AAA Réponse : 250 CWD command successful Commande : PWD Réponse : 257 "/AAAA - AAAA (AAAAA) [March 18, 2010] AAA" is the current directory Commande : PASV Réponse : 227 Entering Passive Mode (xxx.xxx.xxx.xxx). Commande : MLSD Réponse : 550 Unable to handle command Erreur : Échec lors de la récupération du contenu du dossier

Client OS : Win XP Protocol : FTP

I have a valid ssl certification on my server. I connect filezilla cliet TLS and i have to accept this cert. WHY? My browser accept automatic this cert. I need to the client use microsoft cert store. How to it?

I am running FileZilla 3.3.2.1. I have the default pane layout with "Remote site" on the right hand side. When not connected to a remote site, either after startup or after disconnecting, the status bar (is that the correct word?) under Remote site displays "Empty directory." This text implies that a certain directory is targeted but that it does not contain any file to display. In my view that is incorrect, because there is no directory that this refers to. It would be better if the text read "Nothing to display" or "No files to display".

Windows 7 x64 FileZilla Client 3.3.2.1 (updated from previous version automatically)

After transfering text files (in Mac encoding - CR at line end) CR are removed from file at all. Tried some other ftp-clients - everything's ok.

Currently dragging a file to a subfolder shows a mouse icon with a "+" symbol next to it and the file is moved - however in explorer this means that the file will be copied to the subfolder

In filezilla (in the remote pane) either the icon is wrong (and it should be a normal mouse icon) or the action is wrong (and the file should be copied not moved)

Minor but hope this helps

~moltenlead

If i drag a file direct from the FTP Server to the Desktop (not to the desktop in the local list).

FileZilla create a Folder (for example "fz3-12719247126390") and i get a error message "Konnte das Ziel der Drag&Drop-Operation nicht ermitteln. Entweder ist die Shell-Erweiterung nicht ordnungsgemäßt eingerichtet oder Sie haben die Dateien nicht in ein Explorer-Fenster gezogen".

In other folders such Documents i get the same message.

This may be related to this bug:

​http://trac.filezilla-project.org/ticket/3477

Two years old and long since closed, but this appears to be the same (or a similar) issue.

Uploading multiple files in multiple folders, over SFTP, with multiple concurrent uploads (5 is my setting), doesn't work with all servers.

The problem is, the client makes no intelligent decisions about the order in which uploads are processed.

That is, if you're uploading "folder_a/file_a" and "folder_a/file_b", the order in which these happen to occur, is unpredictable - it depends on whether or when a thread happens to be available.

So when "file_a" begins to upload, the folder is created - but if at the same time "file_b" begins, and assumes the folder has been created, but the previous request didn't complete yet, it will fail.

Hello,

When I ever I set my default file exists action as "Overwrite File", it works fine till the time I close & re-open the filezilla. After re-opening the application it is again set to "Use default action".

I keep getting this error below. I know I have entered the information correctly.

Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 1 of 50 allowed. Response: 220-Local time is now 00:49. Server port: 21. Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER iscript Response: 331 User iscript OK. Password required Command: PASS * Response: 530 Login authentication failed Error: Critical error Error: Could not connect to server

hi, i upload my files with filezila latest version 3.3.3 !! i have a lot of ftp account but whenever i upload a file up to 200k then this error come Error: Could not write to transfer socket: 0 Error: File transfer aborted by user what is this? if i use filezilla 3.3.1 then this error didnot come? i can use filezilla 3.3.1 to upload files but this version is little slower what do i do? please reply me to my email adress

After changing the interface theme in settings, the icon bar icons are updated but not the icon for the speed limits.

Filezilla 3.3.3 or 3.3.4.1 installed in Windows 7 Enterprise Edition[Version 6.1.7600]

Using Filezilla client download all files from ​ftp://ftp.openbsd.org/pub/OpenBSD/4.7/i386/ when all files downloaded, check SHA256, found two files (pxeboot and bsd) corrupt, other files' checksum ok.

same machine, using IE download pxeboot and bsd, checksum ok.

original file: bsd, file size 7582622, SHA256:303a6062e8a50c6ed76aa12023a89f28771a17c5f70d42a98723b8f9776bb7c6 pxeboot, file size 53532, SHA256:4eface5e3bb04ba66b7e311578b9afaf4733f2f76ff663ee6553e044b33c3b80

filezilla downloaded corrupt file: bsd, file size 7601105, SHA256:9E6D37E5DAB8E597FA5259A47DCBBF5DD699FE07B5C9F6A6B52C1E2C6DA82A9B pxeboot, file size 53748, SHA256: 56158D0CA1AF6F3CA537E25C9876253CA8A3E5228BB5D9470C5226B62A8643AD

this bug also send to misc@… for notice.

The reconnect button on version 3.3.4.1 is not working

Hi,

i've a strange behavior with one ftp server : the authentification is OK but the remote directories listing is failing with a MLSD 500 command and an ? answer... resulting in a Error: Failed to retrieve directory listing.

The same operation is OK with winscp and the command-line ftp client started with cmd in windows.

Filezilla client : 3.3.4.1

Dear filezilla team,

with downloading a file containing german umlauts and / or a directory with german umlauts an error occurs with cannot open file. I am using the latest 3.3.4.1 version.

with best regards Werner

Filezilla client V3.3.4.1

I get an access violation / segfault:

The instruction at "0x00a1a8d9" referenced memory at "0xc80202e0". The memory could not be read.

It is 100% reproducible.

Steps to reproduce:

1) Open filezilla, assert that language is set to "Default system language" (otherwise do it and restart filezilla).

2) Settings -> switch to language English (en). Press OK

3) Setting -> switch back to language "Default system language".

Now nearly all calls to menuitems lead to this segfault.

This is no tragedy but I do want to mention it.

When viewing dates on the local drive, 11-10-10 appears before 11-3-10. This is because it appears to be picking up the first digit and not both, to correctly order the dates.

Downloading files from filezilla ftp server over FTPES, when I drag a file from the server file list to the client file list, if its replacing an old file, the file size is for the old file, not the one replacing it. This doesn't seem to always happen.

Both client and server are windows xp sp2.

Certain directories on remote server appear to be locked (see attached log). Opened a ticket at the remote server and they forwarded it to FTP Voyager (the FTP server that they use). FTP Voyager people insisted that I purchase their client. Their client has no problem accessing the "locked" directories. By the way, the same directories are "locked" when using the FTP Commander client.

Doing an FTPES connection to WebDomainNow.com (with any random username and password) gives a "Unknown certificate" message which says that the certificate expired in 01/01/1970 !!!

Is the certificate faulty, or FileZilla ?

By the way, this is the same certificate mentioned in bug #5693 so it's possible that those code changes caused the problem.

Screenshot attached as a B&W GIF to make the filesize tiny.

Thanks!

When transferring a PNG file to a linux webserver, the PNG files lose 1 bit of data, making them corrupt. When transferring other image files, no corruption takes place.

Dear File-Zilla Development Team member,

Hi ! I am using File-Zilla for the first time & saw that it's a very nice tool. But, have 4 issues, which are as follows: -

1. Due to any reason, if system get restarted or shut down, it don't keep the track that which of the files are in download/upload process, how much %age is completed & how much is remaining, how many files are their to be downloaded.

2. Suppose a RAR/ZIP file is getting downloaded or uploaded & say it's size is 315 MB. If, in between Internet gets disconnected or by any reason Connection between Server-Client interrupted. Then after resume, File-Zilla continues the Download/Upload process even after 100% process graph & when we see the size of file at the download location then it's size is greater than original size & the file is of NO use.

3. Verfication & Synchronization after download - both of these options are missing.

4. If we set - "Action after Queue completion" to "Close File-Zilla" then it closes the File-Zilla software WITHOUT DISCONNECTING THE CONNECTION FROM SERVER. I personally saw this issue that after completion File-Zilla closes itself & when I check at the Server then in FTP current connection the connection is active. In this process, I suggest that after completion, File-Zilla first gets disconnected from Server & then closes itself. This process should be following in two more actions - Restart system & ShutDown system.

Waiting for positive reply.

Thanks & Regards, Bharat Sethi

After upgrade to 3.3.5.1

Added fiels to queue - after first upload system halt Second time - no queue - after first file uploaded system halt (NOT BLUE SCREEN BUT HALT)

event id 1000 - log entry

Faulting application name: filezilla.exe, version: 3.3.4.1, time stamp: 0x4c68656b Faulting module name: ntdll.dll, version: 6.1.7600.16559, time stamp: 0x4ba9b29c Exception code: 0xc0000005 Fault offset: 0x00033c2c Faulting process id: 0x1e60 Faulting application start time: 0x01cbc88e8a840483 Faulting application path: C:\Program Files (x86)\FileZilla FTP Client\filezilla.exe Faulting module path: C:\Windows\SysWOW64\ntdll.dll Report Id: d6e37232-3481-11e0-95e0-001bfc03df6a

FileZilla Client

Version: 3.3.5.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2010-11-21 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.11 GnuTLS: 2.10.2

Operating system:

Name: Windows NT 6.1 (build 7600) Version: 6.1 Platform: 64 bit system

Just a slightly irritating bug, when I go to chmod something and it is not allowed, it still comes up green so I don't see the fact there has been an error. For example:

Response: 550 CHMOD 777 plugins: Operation not permitted

Should be red as it went wrong...

After changing the interface theme in settings, the icon bar icons are updated but not the icon for the speed limits. (see bug #5504, but for linux this time round)

I am using an embedded FTP server from Green Hills. It follows in the Linux tradition using a slash, '/', to separate directory levels. When I connect with FileZilla it attempts to set the working directory using backslashes, '\', which results in an error. The display shows folders with question marks. (Presumably as a consequence.) FZ then does a PWD and appears to then recognize that slashes are to be used. Subsequent commands use slashes and there are no more problems. Would it make sense to issue a PWD as soon as the connection is opened and use the response to direct how to format all future directory-related commands? See the sequence below:

11:03:49 Status: Connecting to 199.184.177.89:21... 11:03:49 Status: Connection established, waiting for welcome message... 11:03:49 Response: 220 Service ready. 11:03:49 Command: USER ecc1 11:03:49 Response: 331 User name ok, need password. 11:03:49 Command: PASS 11:03:49 Response: 230 User logged in. 11:03:49 Command: SYST 11:03:49 Response: 215 UNIX Type: L8 11:03:49 Command: FEAT 11:03:49 Response: 500 Unknown cmd FEAT 11:03:49 Status: Connected 11:03:49 Status: Retrieving directory listing... 11:03:49 Command: CWD \mnt\sdmem_0_a\ecc1 11:03:49 Response: 550 Bad path. 11:03:49 Command: PWD 11:03:49 Response: 257 "/" 11:03:49 Command: TYPE I 11:03:49 Response: 200 Command OK. 11:03:49 Command: PASV 11:03:49 Response: 227 Entering Passive Mode (199,184,177,89,159,53) 11:03:49 Command: LIST 11:03:49 Response: 150 Here it comes... 11:03:49 Response: 226 Transfer OK, Closing connection 11:03:49 Status: Directory listing successful

When the client is started automatically from another program, using command line options to specify the server, the client will not limit the number of connections to 1. When connected to a server that supports only 1 ftp connection at a time, no file transfers are possible.

This worked in client V2.2.32 (but this older version had other issues). When i use the ServerManager as a test, i can limit the number of connections to 1, then everything works, but this is not a solution, i cannot use the ServerManager for all possible automatically connections.

FileZilla 3.5.0-rc2

To reproduce try to download a file to a folder where FileZilla has no write privileges. On current Windows version this could be C:\ for example as this would require elevated privileges.

The download appears correctly on the tab for failed transfers, but the reason is "Transferring".

when change language in the Settings Panel half of FileZilla interface still use previews language. FileZilla Version : 3.5.0

Tried to download file over sftp with space at begin of filename gives me:

path/filen name: open for read: no such file or directory

seems to trim filename.

Filezilla 3.5.0_x86_64

Hello does filezilla has a synchronize feauture? from local to ftp server or from ftp server to local.

hope you could help me thanks a lot.

ascii files on server have different filesizes than the ones on local disk

local disk has correct size, but server shows smaller size, maybe it is a problem of the server?

update: newlines are not counted on the server i did some experimentation..

binary files are not affected

Filezilla crashes when I access my laptop from FileZilla, then disconnect the laptop from my Homegroup and try to navigate away from the laptop directory.

Steps to reproduce the crash:

1. Connect a device to your homegroup
2. Access the device on FileZilla (Local site) by going to
   COMPUTERNAME
3. Disconnect the same device you access
4. Attempt to navigate away from the device

Status: Resolving address of www.aworldofsoftware.zxq.net Status: Connecting to 67.220.217.235:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 223 of 500 allowed. Response: 220-Local time is now 13:54. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 2 minutes of inactivity. Command: USER www.aworldofsoftware_zxq Response: 331 User www.aworldofsoftware_zxq OK. Password required Command: PASS Response: 530 Login authentication failed Error: Critical error Error: Could not connect to server

Filezilla 3.5.0 always opens maximized from the Unity Launcher in Ubuntu 11.10. I have tried resizing the window and placing it in different positions on the desktop before closing but Filezilla is ignoring this and opening maximized regardless.

3.5.0 is the latest version available in Synaptic for Ubuntu 11.10

I've got the following trouble in all FileZilla versions i had used including the latest (3.5.3)

Empty directory listing doesn't work properly (in both passive and active mode). When i try to open an empty directory or upload a file in an empty directory opening or upload fails in most cases (about 85% – sometimes, seemingly randomly, it passes).

I presume that this is server-related trouble but since the server is a popular public host with very "standard" settings the trouble could be resolved. Some other FTP-client (but not all) are working properly with this server

In the attachment is the log of uploading the file in an empty directory.

Below is my system parameters:

Windows 7 64-bit AMD Athlon 64 X2

In Filezilla 3.5.3, specify active ftp and no fallback, and a socks5 proxy. Connect to a ftp server, this is done correctly over the socks proxy. Download something, and observe that a *passive* data connection is created over the socks proxy instead of an active one.

Status: Resolving address of www.easynetmarketing.org Status: Connecting to 176.9.194.117:21... Status: Connection established, waiting for welcome message... Response: 220 ProFTPD 1.3.4 Server (ProFTPD) [::ffff:176.9.194.117] Command: USER dallasqqq@… Response: 331 Password required for dallasqqq@… Command: PASS Response: 530 Login incorrect. Error: Critical error Error: Could not connect to server

So, I change my password at least 3 times, but it doesn't work out. Where could be a problem?

Newest (win32 3.5.3) filezilla refuses to show hidden files on a proftpd server. If I use the WinXP shipped ftp, 'DIR -a' command shows hidden files as expected and I see the options text saying parameters -l and -a were used. With filezilla w/o hidden files setting the 'Options: -l' appears both times.

Hi, I have been creating a webpage with php. I made some changes to one of my php file and uploaded it from filezilla. But the changes are not affecting in my webpage when I run it in my local web server. What is the problem?

After I get notification to update my FileZilla Client from 3.5.3 to 3.6 and confirm that, new installation put files into "Program Files (x86)" - before update I have files in "Program Files" (default x64). I check the new version and that seems to be compiled for x86_64. In fact I have two copies of FileZilla Client files, old x64 v. 3.5.3 and new 3.6 in program files for x86. I have to update my shortcuts on the desktop to new file localization. I have to manually delete old file. Installation wizard did't recognize my system version - x64. I can change it under installation but default it was x86 and I think it was x86 version.

I have Windows 8 Pro x64.

Hi, I am using version 3.6.0.1. There is a GUI issue related to refresh the Quickconnection bar, after the connection to the server has been establish. The refresh doesn't occur. It is done when changing focus to another task then coming back to Filezilla i.e. repaint it (see attached screen copy) Thank you for this so usefull software.

I am unable to connect to filezilla it shows critical error 500 could not connect to server. My site is www.flavorsofmumbai.com.... please help at the earliest...

is 'Documents'

should be 'Downloads'

if localized, the name changes, for french it is 'Téléchargements'

This probably doesn't happen very often to anyone, but when I right clicked a file to delete it, while the right click menu was still up, the server disconnected. When I chose to delete the file, it tried to send DELE (or whatever the command is) to the server that isn't connected anymore without trying to reconnect. This just made the DELE command hang until I had to cancel the operation manually.

It's a small bug but it probably is an easy fix.

After upgrading to version: 3.7.0.2, FileZilla crashes when I attempt to login to our Egnyte ftp server.

Process: filezilla [4545] Path: /Users/USER/Desktop/FileZilla.app/Contents/MacOS/filezilla Identifier: de.filezilla Version: 3.7.0.2 (3.7.0.2) Code Type: X86 (Native) Parent Process: launchd [153] User ID: 501

Date/Time: 2013-06-01 09:04:39.762 -0400 OS Version: Mac OS X 10.8.3 (12D78) Report Version: 10

Interval Since Last Report: 40809 sec Crashes Since Last Report: 2 Per-App Interval Since Last Report: 55 sec Per-App Crashes Since Last Report: 2 Anonymous UUID: 2DF65C3D-CF76-CFD0-7A78-F5881F1CAEBA

Crashed Thread: 0 Dispatch queue: com.apple.main-thread

Exception Type: EXC_BAD_ACCESS (SIGSEGV) Exception Codes: KERN_INVALID_ADDRESS at 0x00000000fffffff5

VM Regions Near 0xfffffff5: --> shared memory 00000000ffffc000-00000000ffffd000 [ 4K] r-x/r-x SM=SHM

When FileZilla asks to download an update, the downloading view is cropped at, i guess, 80% width.

It's not a big deal but i guess not something hard to fix.

Very similar to ticket # 8870: I download v3.7.3, and start the installer. There's a pause, and then an error message pops up stating "You must be connected to the internet to complete your installation. Please connect and try again."

Of course I'm connected - I just browsed to the filezilla-project.org website and downloaded the client, demonstrating a working Internet connection, so I'm not sure what the issue could be. I've attached a screen shot as requested in ticket # 8870.

Getting the following error when trying to log into account: Status: Resolving address of finforens.com Status: Connecting to 184.168.221.96:21... Status: Connection established, waiting for welcome message... Error: Connection timed out Error: Could not connect to server

Host, Username and Password used are correct. Please help

Getting the following error when trying to log into account: Status: Resolving address of finforens.com Status: Connecting to 184.168.221.96:21... Status: Connection established, waiting for welcome message... Error: Connection timed out Error: Could not connect to server

Host, Username and Password used are correct. Please help

could not log on to A8384664@… to upload my files to web page. this is the error message I get Connection attempt failed with "EAI_AGAIN - Temporary failure in name resolution". my email is justfixitdj@…

It seems that the speed calculation Tooltip upload/download speed values on the very right bottom corner overflows sometimes (~every 5th time). There is no correlation to the files in queue or upload/download operation - no error logging.

See attached screenshot for example.

FileZilla Client

Version: 3.7.3

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2013-08-07 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 3.1.11 SQLite: 3.7.16.2

Operating system:

Name: Windows NT 6.1 (build 7601, Service Pack 1) Version: 6.1 Platform: 64 bit system

I am trying to transfer the binary file from the remote server to my local directory by dragging and dropping it.

The original file has size 1,855,488 bytes, the resulting file has size 1,855,392, as also reported by filezilla itself.

The file is the binary SQLite database.

The transfer log: Status: Starting download of /public_html/xxx/includes/xxx Command: PASV Response: 227 Entering Passive Mode (198,46,81,146,124,133) Command: RETR webcal Response: 150-Accepted data connection Response: 150 1812.0 kbytes to download Response: 226-File successfully transferred Response: 226 2.623 seconds (measured here), 0.68 Mbytes per second Status: File transfer successful, transferred 1,858,120 bytes in 3 seconds Status: Disconnected from server

File is always transferred with the same discrepancy (subsequent attempts produce the same wrong version). The file in question didn't have any extension (no periods in its name). There is 'Default transfer type' option in 'Settings' which was set to 'Auto'. When I selected 'Binary' there, the discrepancy disappeared.

Another, smaller, SQLite database (290,816 bytes) was transferred correctly. It had a period in its name, but no recognizable extension.

So I believe that filezilla wrongfully defaults the type of file without extension to 'Ascii'. When the type of file isn't known, and 'Auto' is selected, it should default to 'Binary'.

version 3.6.0.2

Awesome new feature to automatically download updates to FileZilla, however, instead of in the user'sDownloads folder, the archive ends up in Documents instead. Only a minor nuisance, but still I think this should be corrected.

Steps to reproduce:

• Hide local directory tree
• Show remote directory tree
• Enable directory comparison
• Chose "Yes" in the dialog asking to enable local directory tree

Result Local directory tree icon is marked as hidden, but directory tree is shown.

Expected result Local directory tree icon is marked as shown.

Remarks It also works the other way round, by swapping local and remote tree and icons.

I've used Filezilla for many years, but after today's update (to version 3.8.1) I can't connect.

All goes well with my username being accepted, but when it gets to password, the response in green says "530 login authentication failed" and a red message appears "Critical error. Could not connect to server."

I've tried shutting down Filezilla and starting it up again, but always the same message.

Help please.

The last 2 versions of FileZilla have downloaded to the wrong directory. (3.8.1 & 3.9.0) When a new version is available, I get a dialog stating that a new version is available and has been downloaded to my Downloads folder. This is not the case. Instead the versions are being downloaded to my Documents folder.

I would expect the archive to be downloaded to my Downloads folder, since this is where everything else ends up. (preferred) Or I would expect the dialog to tell me that the downloads are in my Documents folder.

After updating to 3.9.0.1, pressing the Tab key no longer stops in the local or remote file list, when the directory trees are hidden. The caret moves from the Local site: address immediately to the Remote site: address. When the directory trees are shown, the caret will stop in the file lists.

same bug as ticket #9658 installed newest 3.9.0.1 it crashes the display driver every 3-4 clicks with the mouse. Then it recovers itself and you can continue using Filezilla. Error has to do with the Filezilla version 3.9.0.1 program, not the display driver. Even though you rejected the previous ticket.

Tried to find an older version, but not yet succesful.I am sure that will also solve the problem for me, but it is not my ideal solution.

Kindest regards, Sandra

Using FileZilla 3.9.0.1 on a MacBook Air.

Often, when I intentionally quit the application, an error message says "FileZilla quit unexpectedly".

i recently upgraded to 3.9.0.1 and then 3.9.0.2 version. when i start downloading using filezilla, my screens turns black i.e. flickering starts and sometimes i get memory dump error too. earlier i was using "FileZilla_3.8.1_win32-setup.exe" file and it was working very smooth. but with upgrades 3.9.0.1/3.9.0.2 versions, unable to complete my work.

De curand mi-am reinstalat windowsul si cand incerc sa pornesc FileZilla imi da eroarea asta: ​http://oi61.tinypic.com/zsk0au.jpg Va rog sa ma ajutati, am multa treaba si nu ma pot apuca de nimic...

Hello, when using the Automatic Transfer Mode FileZilla corrupts *.jar % *.rar files with no extension. I think FileZilla removed the CR (only one was present). He tried to repair things where no repair was needed. Using the Binary Transfer Mode fixes this.

When I open any of the accounts on my site manager, my screen goes black and then the message "display driver stopped responding and has recovered" appears. If the browser is open, it looks like the second page on the attached pdf, untill I close it and open it again.

This also happens when I click on a folder, download or upload a file.

Steps to reproduce:

• connect to a server
• on the local side (left), select a few folders
• right-click and upload

Expected result:

• for each folder, it should OBVIOUSLY first create the folder, then upload the files.

Observed results:

• for each folder, systematically, the "put" command to upload the first file in the folder is sent BEFORE the mkdir command to create the folder. So, unless the folder already existed on the server, that file upload gives an error and is not uploaded.

ALSO, whenever a file gives an error it should be kept in the queue so that you can retry!!!

This level of unreliability make FileZilla completely unusable. You have to check all the files one by one, because there may have been any such random error and you wouldn't even know.

I think this is a regression. I have used FileZilla for ages and had never seen such a thing before.

Example log when uploading a folder called "runtime" within one called "protected":

Status: Starting upload of /home/teo/Documents/xxxxx/protected/runtime/application.log.4 Error: Directory /srv/www/xxxxx/protected/runtime: no such file or directory Command: cd "/srv/www/xxxxx/protected" Response: New directory is: "/srv/www/xxxxx/protected" Command: mkdir "runtime"

I have upgraded and since the upgrade I am unable to connect.

Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of fabricgarden.3dcartstores.com Status: Connecting to 173.192.94.225:21... Error: Connection timed out Error: Could not connect to server

Response: 150 opening data connection server sent unexpected reply and connection close errors.

Hello. Here is the scenario. In the remote directoy the file that I want to download is being builded (an sql backup) and the size displayed for Filezilla Client is X. then when I note in the SSH terminal that the dump has been finished, I proceed to download with FileZilla client, and the issue here is that Filezilla uses the size of the file detected the last time reviewed, and not the final size (then an incorrect file size is displayed in the progress of the file that is being downloaded).

thanks for your attention.

I have Filezilla 3.9.0.5 x64, but the automated update installed 3.9.0.6 x86. Also my current version (3.9.0.5 x64) won't be uninstalled during the update process.

I just updated Filezilla to the latest version and since then it has not been possible to fully connect to my FTP server.

Here is a copy of the log window:

Status: Resolving address of 31.193.5.45.srvlist.ukfast.net Status: Connecting to 31.193.5.45:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (31,193,5,45,236,233). Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

I have been using FTP daily until performing the upgrade.

Here is the current About Page:

FileZilla Client

Version: 3.10.0

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-01-07 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.20 SQLite: 3.8.7.2

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

After upgrading to the latest release, I am now presented with a Unknown certificate dialog window. The 'Always trust certificate in future sessions' is disabled and cannot be selected.

Although I connect to the requested site by just clicking OK on the dialog page, transfers fail with a response message of: 550 The supplied message is incomplete. The signature was not verified.

Prior to upgrade, I was able to connect and ftp files to the requested site without problems.

I tried un-installing and then installing the latest release, but still have the same problem.

Thanks for a great product. I hope you can help me resolve my issue.

Pat

With the new update, the program started to show security certificate warnings and couldn't connect to the server. (It tries but times out.)

No idea what is causing it, pretty sure it is introduced with the last release though.

The previous version still (3.9.0.6) works great, you get it by using the link below: ​http://sourceforge.net/projects/filezilla/files/FileZilla_Client/3.9.0.6/

When I tried to connect to any FTP site, error message: (Connection attempt failed with "EACCES - Permission denied".)

Status: Waiting to retry... Status: Resolving address of ftp.xxxxxx.com Status: Connecting to xx.xxx.xxx.117:21... Status: Connection attempt failed with "EACCES - Permission denied". Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of ftp.xxxxxxxx.com Status: Connecting to xx.xxx.xxx.117:21... Status: Connection attempt failed with "EACCES - Permission denied". Error: Could not connect to server Status: Waiting to retry...

Other Comments: * I don't know what version I upgraded from, but the first upgrade was to 3.10.0.0 and the second upgrade was to 3.10.0.1.

I have confirmed I'm using the correct password.

Even with the latest update 3.10.0.1, I can't access the listing and it closes:

Status: Resolving address of rayonviolet.com Status: Connecting to 50.87.123.97:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (50,87,123,97,84,35) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

FileZilla Client

Version: 3.10.0.1

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-01-12 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.20 SQLite: 3.8.7.2

Operating system:

Name: Windows 8.1 (build 9600), 64-bit edition Version: 6.3 Platform: 64-bit system

I just installed (updated) to version 3.10.0.1 and now none of my connections work!!!!

I'm having trouble with editing of files. When I open Filezilla, and edit a file, no trouble. If I close that file in the associated application, then try to edit again through the Filezilla interface, I get an error that reads: "The file myFile could not be opened: The associated command failed."

myFile is the actual path and filename of the file I'm trying to edit.

I'm editing with Notepad++.

If I close Filezilla, and reopen, this error clears, but the process starts over - it only effects re-editing of a file that has already been edited.

Updated to version 3.10.0.1 and after updating I cannot update our business website because it says it not connect to the server. I had no problem updating our website with the previous version which I think was 3.10.0. I checked with the server and the server Tech support says the problem is with File Zilla and not with the server. This is urgent to get fixed as we have wrong information for customers on our website.