Custom Query (2164 matches)

FileZilla doesn't seem to recognise file types that are handled by Windows apps. The dialog "no program associated with filetype" pops up, even if FileZilla is setup to inherit windows filetype association.

For filetypes like pdf, wich have a 3rd party viewer installed FileZilla opens file without problem.

I am receiving the following error every time I have finished editing a file with auto-uploading. This occurred immediately after the most recent update. It does not affect the upload but is rather annoying (please see the attached png image).

Tooltips in file transfer queue panel shows outdated information.

Steps to reproduce:

1) Queue 4-5 files.

2) Let at least the first file transfer complete.

3) Mouse over the first (currently downloading) item to display the tooltip. It will display a previous, finished item.

using SFTP over port 22 to upload files I changed my login information on my linux server and then I changed my login information in the Site Manager, after clicked 'Connect' and successfully connected to my server, I tired to upload some file onto my server and find out that new upload threads reports login incorrect and caused me banned for 10 minutes due to fail2ban installed on my server. And after I restarted Filezila, the problem is gone.

I have a raspberry pi set up as a web server for development. I use Filezilla to FTP tested code to the “live” web server. As such, I have various “sites” configured in the Site Manager. The Raspberry Pi has a static IP address that I use to remotely access its file system.

When I add an address, like the following below, to the “Default local directory” field (in the Site Manager under the “Advanced” tab):

\\192.168.0.6\one_of_the_site_dirs

I get a listing of the files in that directory, just fine—BUT, in the pane that shows the directory tree, it still shows a listing from my PC's local hard drive (i.e. 'C:\') and NOT the directory tree from the PI.

This is also true if I use the host name I created for my PI (LITTLEGEEK, in this case), like so:

\\LITTLEGEEK\one_of_the_site_dirs

I can still use Filezilla to upload my Raspberry Pi hosted files to the external server hosting my websites, thus, this is not a show-stopper, but thought you would like to know, in case you care about full functionality ;)

Filezilla “About” info:

FileZilla Client

Version: 3.27.0.1

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2017-07-19 Compiled with: x86_64-w64-mingw32-gcc (GCC) 6.3.0 20170516 Compiler flags: -g -O2 -Wall

Linked against:

wxWidgets: 3.0.4 SQLite: 3.19.3 GnuTLS: 3.5.13

Operating system:

Name: Windows 10 (build 15063), 64-bit edition Version: 10.0 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi2 bmi2 adx Settings dir: C:\Users\Steve\AppData\Roaming\FileZilla\

It would be nice to edit QuickConnect entries. I just edited the file recentservers.xml to add LocalDir and RemoteDir parameters, but they seem to be ignored if used via QuickConnect in oposition to what happens with sitemanager.xml. Why limit the possibilities of QuickConnect and allow users to configure the settings as he would in the "normal" way? Thanks.

Hello,

Using 3.27.1 (but appears on 3.25 too) after browsing into a directory with 79 files but rather long filenames the directory listing remains empty, yet the little status bar immediately below shows that there are files in the directory. (The listing works, confirmed by debug raw listing, and using lftp too.)

After interacting with the listbox (resizing the listbox, or the whole window - so causing the resize of the listbox in any way), results in the file list appearing correctly. (I can scroll, download files, etc.)

Another interesting quirk is that if I browse to a different directory and then click back to this one, things shop up correctly. If I click on to its parent and back, it's empty again.

Playing with it more, it seems that the parent directory is the culprit (happens to be called uploaded, I hope the name has nothing to do with the phenomenon), because after clicking on that (contents show), and clicking on an other directory, then the dir I just clicked appears empty.

And it seems not completely deterministic :(

I've noticed that on the: Target already exists dialog the same hotkey 'O' is set for both "Overwrite" and "OK" options.

On Filezilla Mac OSX version, copy pasting anything in text boxes (for instance when editing websites or configuration) does not paste text but instead "creates a new Bookmark" (even when input is focused).

All previously changed configuration in inputs is lost if you were adding a website.

It's especially annoying not to be able to ⌘ + V... ;-)

I have noticed the issue on all MAC computers i use and since a lot of versions.

I cannot get one protocol to work with my hosting provider. they say all is OK on their end. what's going on? I need to upload my files to my web site and all is NO-GO.

I'm using FZ 3.27.1 on Mac OS X 10.12.6.

It's hard to say exactly what the problem is, but the key thing is the v / ^ arrow doesn't always correctly reflect the actual ordering being shown. In general, the ordering appears to be working. When I click on a column to sort it, the data gets sorted correctly, however the arrow doesn't always appear on the first click and when it does appear, it doesn't always toggle with every click.

In order to reproduce, try the following: # Log in to FTP site (i'm logging in via FTP to an IBM i Mainframe) # Sort the rows in the remote tree (Last Modified, FIle Size, etc.) This appears to work consistently # Change directory # Try sorting again. this is where it falls down. The arrow doesn't appear on a column on first click and then doesn't toggle after the second click.

When I try to rename file, after it's done, app freeze and I have to shutdown it and start again. Which is bad, when I have open multi files and I have to resave them manually (copy + paste) and save to server again.

When transferring a file, a Target file already exists dialog is displayed. Settings are then chosen, and the transfer takes place.

However, that happens on every FileZilla launch. Boring as bat poop.

The entire Target file already exists dialog should be a Page under the FileZilla/Settings menu (which is usually called Preferences on a Mac).

Cheers Derek

Hi,

FZS uses system local settings for loggin date/time format, but does not implement something correctly with 00-hour. It produces like "8/30/2017 0:01:10 AM", which is not correct date/time, there is no 00-hour in proper AM/PM time convention. Correct would be "8/30/2017 12:01:10 AM".

So, depending on system locale, changes also datetime format in logs. This fails automatic date/time parsing from them, though non-trivial workarounds possible.

I would suggest using some international 24hour format, like YYY-MM-DD HH:MM:SS, which would ease off a lot of confusions when transferring logs between systems and trying to parse them for statistics, last user activity etc.

Whatever the active button, no tooltip is visible.

CF screenshot

I am unable to access my account in the FileZilla forums. I believe that I my have forgotten my password, and I definitely forgot my user name, but not my user name. Each time I try to use the Forgot Password feature, I am asked for my forgotten user name and my email address, and am told that there was no match for what I tried. Please add a Forgot User Name feature.

Incidentally, I tried registering with a GMail account and was told those are not supported. I don't want to switch to another ISP/EMail service just to use FileZilla. It seems that every other forum trust that sending a password reset email to a user's email address is safe enough.

Using FileZilla I can copy the file to a linux server. Using FileZilla I can delete the file. I can not rename it using FileZilla, as the initial filename is too long. But I can if I use the standard explorer.

I found that FileZilla 3.28.0 can't import settings from other PC's FileZilla.xml, both on Windows 10 Pro (version 10.0.15063).

How to reproduce it?

1) make some changes in Settings window, adjust Limit local ports to 1025 and 60000 for example.

2) select Files > Export... > Export Settings and export settings to FileZilla.xml

3) copy FileZilla.xml to another PC, select Files > Import... and select FileZilla.xml then check Settins to import settings.

4) restart FileZilla and you will see everything as default value.

When we upload files as ldap authenticated users the files upload fine and with debug enabled I can see the full ls -l in the log but when the files is displayed in the remote directory it shows with 0k size and null permissions and owner/group.

rectory /export/home/app/ta/usgats/upload/mkl04053 Listing: drwxrwxrwx 2 tausgats dba 281 Oct 30 13:57 . Listing: drwxrwxrwx 28 tausgats dba 676 Oct 30 14:02 .. Listing: -rwxrwxrwx 1 tausgats dba 77836 Oct 30 13:57 uladumk.log Listing: -rwxrwxrwx 1 ora11 dba 52796 Oct 30 13:57 uladumkl.ctl Listing: -rwxrwxrwx 1 joshua.burney Target - ARC Access 4270 Oct 30 13:55 pymc10232017_test.mkl_v2.mkl Listing: -rwxrwxrwx 1 tausgats dba 2737 Oct 30 13:57 uladsrep20171030135719.pdf Listing: -rwxrwxrwx 1 tausgats dba 8199 Oct 30 13:57 gmbtdrep20171030135721.pdf Listing: -rwxrwxrwx 1 tausgats dba 3970 Oct 30 13:57 uladurep20171030135715.pdf Listing: -rwxrwxrwx 1 tausgats dba 6015 Oct 30 13:57 gmbtsrep20171030135710.pdf Status: Directory listing of "/export/home/app/ta/usgats/upload/mkl04053" successful Status: Retrieving directory listing of "/export/home/app/ta/usgats/upload/mkl04054"... Command: cd "/export/home/app/ta/usgats/upload/mkl04054" Response: New directory is: "/export/home/app/ta/usgats/upload/mkl04054" Command: ls Status: Listing directory /export/home/app/ta/usgats/upload/mkl04054 Listing: drwxrwxrwx 2 tausgats dba 281 Oct 30 14:02 . Listing: drwxrwxrwx 28 tausgats dba 676 Oct 30 14:02 .. Listing: -rwxrwxrwx 1 tausgats dba 6015 Oct 30 14:02 gmbtsrep20171030140213.pdf Listing: -rwxrwxrwx 1 tausgats dba 7918 Oct 30 14:02 gmbtdrep20171030140222.pdf Listing: -rwxrwxrwx 1 tausgats dba 77836 Oct 30 14:02 uladumk.log Listing: -rwxrwxrwx 1 ora11 dba 52796 Oct 30 14:02 uladumkl.ctl Listing: -rwxrwxrwx 1 tausgats dba 1737 Oct 30 14:02 uladurep20171030140217.pdf Listing: -rwxrwxrwx 1 joshua.burney Target - ARC Access 4270 Oct 30 14:01 pymc10232017_test.mkl_v3.mkl Listing: -rwxrwxrwx 1 tausgats dba 2737 Oct 30 14:02 uladsrep20171030140220.pdf Status: Directory listing of "/export/home/app/ta/usgats/upload/mkl04054" successful

the last file owned by Joshua.Burney is the example

As of 2 days ago, I receive the above, after "426 Data connection closed, SSL / TLS negotiation failed". Attached is the complete log and client/server information.

There is a bug on the Linux version of Filezilla Client that if there is a directory called "sync" in either the local or remote site, it will mess up the synchronized browsing for all directories/files listed after the "sync" directory".

I can provide more details if necessary (screenshots, etc).

Can't display my most recent local files in my folder. All present in File Explorer. Tried refresh and restart many times without success.

I have a folder on my ftp server that contains thousands of files and some subfolders. I want to delete this folder and accidentally the server disconnects. Filezilla automatically re-connects, but does not resume the deletion because it finds not empty directories that can not be deleted. It seems it skipped the file deletion and so it is not able to finish the deletion.

Logs:

Command:	DELE image5642.jpg
Response:	250 DELE command successful.
Command:	DELE image56454.jpg
Response:	250 DELE command successful.
Command:	DELE image9876543.jpg
Error:	Connection closed by server
Status:	Disconnected from server
Status:	Connecting to 192.168.xxx.xxx:21...
Status:	Connection established, waiting for welcome message...
Status:	Initializing TLS...
Status:	Verifying certificate...
Status:	TLS connection established.
Status:	Logged in
Status:	Deleting 5353 files from "/backups/Projekte/xxx/public_html/images"
Command:	CWD /backups/Projekte/xxx/public_html/images
Response:	250 CWD command successful.
Command:	DELE image15432.jpg
Response:	550 image15432.jpg: No such file or directory.

... hundreds of "No such file or directory"

Command:	DELE image15323432.jpg
Response:	550 image15323432.jpg: No such file or directory.
Command:	DELE image3432.jpg.jpg
Error:	Connection closed by server
Status:	Disconnected from server
Status:	Connecting to 192.168.xxx.xxx:21...
Status:	Connection established, waiting for welcome message...
Status:	Initializing TLS...
Status:	Verifying certificate...
Status:	TLS connection established.
Status:	Logged in
Command:	CWD /backups/Projekte/xxx/public_html
Response:	250 CWD command successful.
Command:	PWD
Response:	257 "/backups/Projekte/xxx/public_html" is current directory.
Command:	RMD images
Response:	550 images: Directory not empty.
Command:	CWD /backups/Projekte/xxx
Response:	250 CWD command successful.
Command:	PWD
Response:	257 "/backups/Projekte/xxx" is current directory.
Command:	RMD public_html
Response:	550 public_html: Directory not empty.
Command:	CWD /backups/Projekte
Response:	250 CWD command successful.
Command:	PWD
Response:	257 "/backups/Projekte" is current directory.
Command:	RMD xxx
Response:	550 xxx: Directory not empty.
Command:	CWD /backups
Response:	250 CWD command successful.
Command:	PWD
Response:	257 "/backups" is current directory.
Command:	RMD Projekte
Response:	550 Projekte: Directory not empty.
Status:	Retrieving directory listing of "/backups"...
Status:	Directory listing of "/backups" successful

If you are viewing a directory listing, sorted by "last modified" descending.

then you want to replace an existing file in that directory with one you have uploaded (but currently has a different name) so you rename the new file to the same name as the existing file, after the file is renamed the directory's sort order goes out of whack, the directory is no longer sorted by last modified, until you refresh the directory listing

FileZilla Client

Version: 3.29.0

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2017-11-06 Compiled with: i686-w64-mingw32-gcc (GCC) 6.3.0 20170516 Compiler flags: -msse -mfpmath=sse -O2 -g -Wall

Linked against:

wxWidgets: 3.0.4 SQLite: 3.19.3 GnuTLS: 3.5.13

Operating system:

Name: Windows 10 (build 15063) Version: 10.0 Platform: 32-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 Settings dir: C:\Users\smith\AppData\Roaming\FileZilla\

Hello,

I often use Filzilla in order to update my website, for the forst time today I got an error message telling me the following - FYI i'm on Mac :

Statut : Connexion à 72.55.186.59:21... Statut : Échec de la tentative de connexion avec "ETIMEDOUT - Tentative de connexion expirée". Erreur : Impossible d'établir une connexion au serveur Statut : Attente avant nouvel essai... Statut : Résolution de l'adresse de s039.panelboxmanager.com Statut : Connexion à 72.55.186.59:21... Statut : Échec de la tentative de connexion avec "ETIMEDOUT - Tentative de connexion expirée". Erreur : Impossible d'établir une connexion au serveur

Could you please help me ? Thanks.

Greetings,

I work in an enterprise environment that requires Silent \ Unattended installs and uninstalls to be distributed via command line and SCCM.

Issue 1:

We have confirmed that the filezilla 3.x (32 and 64 bit) Silent Uninstall Command line fails to cleanly remove the application. BUT, it cleanly removes itself if run manually and users attend to the prompts.

They all seem to use the same uninstall Command Line & Registry Key Name :

• Command Line : "C:\Program Files (x86)\FileZilla FTP Client\uninstall.exe" /S

• Registry Key Name: HKLM\Software\..\Microsoft\Windows\CurrentVersion\Uninstall\FileZilla Client

Steps to confirm ...

1. "MANUAL\ATTENDED" Uninstall is successful
   1. Install any FileZilla 3.x and restart the machine
   2. Uninstall filezilla via Add Remove programs (Controls Panel\Programs & Features)

2. "SILENT \ UNATTENDED" Uninstall FAILs
   1. Install any FileZilla 3.x and restart the machine
   2. Uninstall filezilla via the command line : "C:\Program Files (x86)\FileZilla FTP Client\uninstall.exe" /S

Issue 2:

Also, one of my clients had a previous 64bit version installed but then needed the 32 bit instead. It would appear that the 32 installer is installing as 64 bit - this DOES NOT occur if x64 was NOT previous installed on a system.

Testing Steps to confirm ...

1. Uninstalled FileZilla_3.27.0.1_win64-setup_bundled.exe via command line : "C:\Program Files (x86)\FileZilla FTP Client\uninstall.exe" /S
2. Restarted the machine
3. Installed FileZilla_3.29.0_win32-setup.exe
4. This 32 bit installs itself in the "C:\program files (x86)" folder if there was not 64 bit installed before it; but this 32 bit installer is putting itself into the previous 64 bit folder "C:\Program Files" if the 64 bit was installed before.

I hope this was submitted properly; my many thanks in advance!

Best Regards Derrick.

The Navigation column on the left side of https://filezilla-project.org/ is too narrow, causing its contents to "spill" into the center column (body).

Hi,

I changed the root password on my server while FileZilla was still running and I had used it before to do some transfers over sftp (22).

And then I try to upload 3 files simultaneously by hitting right click and upload, it then tells me that the password is incorrect. I type in the new password and hit connect, and sure enough it connects and lists the remote folder.

And then I try to select the 3 files again and hit upload (right click) and it keeps using the old password and not the one on the password field.

I had to restart Filezilla and re-connect to transfer the files without having this old in-memory password fail the transfers.

Please fix, Thank you.

This happens when either re selecting process queue or when just dragging between tabs to a folder with an existing file. The error is "local: unable to open /path/to/partial/file/filename.extension Critical file transfer error"

If I have a slow connection to server, browsing the directory tree is very troublesome. If I want to go to certain path I already know, I need to wait every parent directory to load first so that I can expand their children. So I need to click twice and wait between. Usually this is avoided by allowing expanding unknown directory. After the directory has been loaded arrow can be hidden.

Browsing is also clumsy when I sometimes click wrong directory accidentally. Then I need to wait it to load before I can open the directory which I wanted. The previous directory retrieving should be cancelled if user changes directory during the operation.

With these changes browsing would be way faster also with a slow connection.

I saw another user had an issue like mine, but my anti-virus has not changed and this used to work.

1) Update completes with the status message of "The new version could not be downloaded, pleas retry later."

2) Under "show details" it says:

Started update check on 2018-01-15 12:20:27 Own build type: official Downloading /update.php?platform=x86_64-w64-mingw32&version=3.29.0&osversion=6.1&osarch=64&updated=1&cpuid=sse,sse2,sse3,ssse3,sse4.1,sse4.2,pclmulqdq&initial=0 Resolving address of update.filezilla-project.org Connecting to 136.243.154.122:443... Connection established, initializing TLS... Verifying certificate... TLS connection established, sending HTTP request File transfer successful, transferred 36,244 bytes in 1 second Parsing 36244 bytes of version information. Found new nightly 2018-01-15 Found new release 3.30.0 Downloading /filezilla/FileZilla_3.30.0_win64-setup.exe Resolving address of downloads.sourceforge.net Connecting to 216.34.181.59:80... Connection established, sending HTTP request Resolving address of downloads.sourceforge.net Connecting to 216.34.181.59:80... Connection established, sending HTTP request Resolving address of cytranet.dl.sourceforge.net Connecting to 74.82.59.181:443... Connection established, initializing TLS... Verifying certificate... TLS connection established, sending HTTP request File transfer successful, transferred 7,906,720 bytes in 2 seconds

3) Download appears to have worked, but the software doesn't recognize the fact.

4) There could be something with my computer that is causing a problem, but shouldn't that result in a different status message?

5) It appears that you have sent ou version 3.29 without the ability for it to update itself? So I will see if I can do a manual update to 3.30.

6) Lord help the non-technical fans of Filezilla!!

No reply needed unless I am wrong about this. :-)

Thanks, Chris

• Connect to an ftp or sftp server by using FileZilla 3.30.0
• Enter a remote directory that has more than 5 files in it
• Select at least 6 files and move those into parent directory by using your mouse and dragging and dropping them into "..."
• Once all's moved, click on "..." to enter parent directory
• You'll see every file that's inside that parent directory was selected just like when we press Cmd-A keys

Similar thing occurs, say, you have one folder and 6 files inside a directory. If you were to move all those files into that one folder and then enter that folder, you'll see all files except the first one in that directory got selected.

It doesn't occur if you select and move less than 6 files

If you wish to see it, I've recorded my screen while following the steps mentioned above to reproduce the bug, and put it on YouTube. Here's the unlisted link of the video:

​https://youtu.be/g9qib0SKPbw

The content of the certificate dialog ("Unknown Certificate") exceeds the screen height on Notebooks with a screen size of 1366x768 pixels (tested on my ThinkPad x230).

Though the "OK" and "Cancel" buttons are on screen, part of the content (and the "Don't ask again" checkbox) is not.

I'm proposing to just make the content scrollable.

When you close FileZilla and re-boot using a monitor with a different resolution, the location and size of the window is quite wrong. The size and position should be saved in a resolution-independent way (rather than raw pixels) so it will look similar when switching monitors/changing resolution. (my laptop has 4K screen, but often use with HD external monitor; restarting with a different config can result it FileZilla almost entirely off the right-hand side of the screen).

It takes 130 hours to download 4Gb with a 10Mb/s download speed. If I use google drive or Teamviewer to download the same file it takes me 20 minutes or 2 hours for the same file. Try it on this moment also, it will take 8 hours (still to go)

The provider checked the internet connection already, changed the cable and modem. Speedtest result is 11Mb/s almost every test.

What can I do?

Archlinux, Filezilla compiled with wxGTK v. 3.0.3.1. The better decription of the problem is the pictures I attached. I think all fonts of all controls should have the same size like it was with GTK2 build.

Hello. This FileZilla setting is not working for me (see attachment). In Mac OS X settings, "thousands separator" is set to "space" (see attachment). Thanks.

The "notebook bar looks" like it's from the 90s. Strange gradient in dark mode and it's not readable.

When files are moved from folder-to-folder on a connected server, the cursor icon shows the Windows traditional "Copy" cursor. This is very deceiving because it actually NOT COPYING the file, its MOVING it. I have accidentally broken a number of websites because I thought I was copying a file, when I was actually moving it. The cursor types should be synchronized with Windows standards, which traditionally show a "+" cursor for copy, and an arrowed cursor for moving.

Not possible to delete one shot more than 4000 files. When you have to delete more than 4000 files, Filezilla will stop between 3000 and 4000. To erase more, you need to wait or disconnect and wait the synchronisation. It is painful when you have 10000 or more files to erase (storage of security ipcam images for instance). Thanks for helping here as it is time consuming.

When connecting with a server with e.g. a homebrewn or invalid certificate, the info dialogue displayed is too big even on a 1080p screen if increased font size is selected. The "OK" and "Cancel" buttons cannot be read.

This could be solved by embedding the group boxes into a scrollable widget.

For replication:

• Linux (but most likely OS independent)
• UI: GNOME 3.22
• Font Scaling Factor: 1.10 (use TweakUI -> Fonts)
• Font Size: 13pt (use TweakUI -> Fonts)

These settings are not actually that big. I personally find the behaviour of the dialogue box quite annoying. I can imagine how annoying it must be for someone who has to use even bigger fonts. By the way: The same issue might occur in other large info boxes like the one in Menu Help->About.

Details From Help->About: FileZilla Client

Version: 3.28.0

Build information:

Compiled for: x86_64-pc-linux-gnu Compiled on: x86_64-pc-linux-gnu Build date: 2017-10-29 Compiled with: gcc (Ubuntu 7.2.0-12ubuntu1) 7.2.0 Compiler flags: -g -O2 -fdebug-prefix-map=/build/filezilla-YKhf0t/filezilla-3.28.0=. -fstack-protector-strong -Wformat -Werror=format-security -Wall

Linked against:

wxWidgets: 3.0.3 SQLite: 3.22.0 GnuTLS: 3.5.17

Operating system:

Name: Linux 4.15.0-10-generic x86_64 Version: 4.15 CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi2 bmi2 adx Settings dir: /home/christian/.filezilla/

Note

Problem with an OVH Cloud 3 VPS loaded with Debian 9. Problem also with Debian 9 on my PC. Although the password is good, the connection is refused with a network error.

The item selected last in file or directory tree browser (both local and remote) is not scrolled to view, when the file or directory tree browser is navigated into via tabbing despite the item gaining focus due to the navigation. Inconsistent with behaviour when navigating in the browser; moving in directory structure or file browser with arrow keys keeps the selected item in view.

The settings page gives users the option of whether to check for updates, but not whether they want those updates automatically downloaded or where to save the file. The user should have the option to select either the download path or whether to download updates at all.

It's frustrating when the Downloads folder gets polluted with files from an assortment of programs with no sense of organization, and you have to go through and sort them out one by one just to be able to find anything. Having Downloads as the default path makes sense, but users should have some say in what gets put into that folder.

Just ran into this issue. If one side supports UTF-8 characters in either the filename or directory name, and the other side does not, the transfer fails (and can never succeed.)

The main issue here is that the error message is a terribly generic "Could not start transfer".

The easiest fix for this is simply showing a better error message (Took me a while to figure it out.)

A better solution would be to use some system function to determine and invalid path characters and add them to the list of invalid characters for filtering.

In this case, as I was downloading a site backup (new client,) they had images (from god knows where) that included the width and height as 57×57 instead of 57x57 (first contains a, new to me, UTF-8 x whereas the second contains a normal x.)

Let me know if you need additional logs or anything else.

Log:

00:13:25	Trace:	CControlSocket::SendNextCommand()
00:13:25	Trace:	CSftpFileTransferOpData::Send() in state 0
00:13:25	Status:	Starting download of /applications/wfcrhveasu/public_html/wp-content/themes/ALTN/icons/apple-touch-icon-57×57-precomposed.png.png
00:13:25	Trace:	CSftpChangeDirOpData::Send() in state 0
00:13:25	Trace:	CControlSocket::ResetOperation(0)
00:13:25	Trace:	CControlSocket::ParseSubcommandResult(0)
00:13:25	Trace:	CSftpFileTransferOpData::SubcommandResult() in state 1
00:13:25	Trace:	CControlSocket::SendNextCommand()
00:13:25	Trace:	CSftpFileTransferOpData::Send() in state 4
00:13:25	Command:	get "apple-touch-icon-57×57-precomposed.png.png" "D:\Projects\Adfinitely\AnyLabTestNow\old-server\applications\wfcrhveasu\public_html\wp-content\themes\ALTN\icons\apple-touch-icon-57×57-precomposed.png.png"
00:13:25	Error:	/applications/wfcrhveasu/public_html/wp-content/themes/ALTN/icons/apple-touch-icon-57×57-precomposed.png.png: open for read: no such file or directory
00:13:25	Trace:	CSftpFileTransferOpData::ParseResponse() in state 4
00:13:25	Trace:	CControlSocket::ResetOperation(2)
00:13:25	Error:	File transfer failed

Hi,

I having a problem with my connection FTP. When I test connection is don't work. I have the next error message

Réponse : 257 "/" is the current directory Erreur : Impossible d'analyser le chemin retourné. Erreur : Impossible de récupérer le contenu du dossier

But on my Command Prompt(shell) the connection work. And with the same configuration for connection ( same login, same hoste, ...) on other computeur is working.

My filezilla it do not work have this information system FileZilla Client

Version: 3.31.0

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2018-02-23 Compiled with: x86_64-w64-mingw32-gcc (GCC) 6.3.0 20170516 Compiler flags: -g -O2 -Wall

Linked against:

wxWidgets: 3.0.4 SQLite: 3.22.0 GnuTLS: 3.5.18

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi2 bmi2 Settings dir: C:\Users\fcargouet\AppData\Roaming\FileZilla\

And the filezilla who work is

FileZilla Client

Version: 3.30.0

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2018-01-08 Compiled with: x86_64-w64-mingw32-gcc (GCC) 6.3.0 20170516 Compiler flags: -g -O2 -Wall

Linked against:

wxWidgets: 3.0.4 SQLite: 3.19.3 GnuTLS: 3.5.13

Operating system:

Name: Windows 10 (build 15063), 64-bit edition Version: 10.0 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi2 bmi2 adx Settings dir:
filer\utilisateurs$\pcargouet\AppData\Roaming\FileZilla\

(sorry for my bad english if you speak french it's good for me)

After logging in I was asked for my password but the system would not accept it. I got the following message:-

Status: Insecure server, it does not support FTP over TLS. Command: USER ftp@… Response: 331 User ftp@… OK. Password required Command: PASS Response: 530 Login authentication failed Error: Critical error: Could not connect to server

I had just loaded the latest update and I have been using the same password ever since I started using FileZiller.

Help, how do I update/set a new password?

Hello,

We have a bigger problem with FileZilla Server.

With our current version of FileZilla Server 0.9.43.0, no problem, all of 250 users has a login / password work good.

But, if update with the latest version 0.9.60.2 ... randomly login / password do not work with lot of user: Login / password incorrect.

And if i back to 0.9.43.0, it's good.

Why? You have a solution?

Request connection to an IP address but gets a different IP. Try to connect to 192.168.43.186 but connects to 192.168.43.173 instead. The computer I am using is a windows 10. The ones I am connecting to are embedded Linux machines.

Status: Connecting to 192.168.43.186... Trace: CControlSocket::SendNextCommand() Trace: CSftpConnectOpData::Send() in state 0 Trace: Going to execute C:\Program Files\FileZilla FTP Client\fzsftp.exe Response: fzSftp started, protocol_version=8 Trace: CSftpConnectOpData::ParseResponse() in state 0 Trace: CControlSocket::SendNextCommand() Trace: CSftpConnectOpData::Send() in state 3 Command: open "root@192.168.43.186" 22 Trace: psftp: Implicit session load. Trace: Connecting to 192.168.43.173 port 22 Trace: We claim version: SSH-2.0-FileZilla_3.32.0 Trace: Server version: SSH-2.0-OpenSSH_6.6 Trace: We believe remote version has SSH-2 channel request bug Trace: Using SSH protocol version 2 Trace: Doing ECDH key exchange with curve Curve25519 and hash SHA-256 Trace: Server also has ssh-ed25519/ecdsa-sha2-nistp256/ssh-dss host keys, but we don't know any of them Trace: Host key fingerprint is: Trace: ssh-rsa 2048 db:b6:7c:e6:fe:58:f3:bc:ee:93:26:70:c0:9c:57:99 ryabs8j26Yyhtu5mYQ38R+i8M2tmS9sKKz/tTMoBMdE= Trace: Initialised AES-256 GCM client->server encryption Trace: Initialised AES256 GCM client->server MAC algorithm (in ETM mode) (required by cipher) Trace: Initialised AES-256 GCM server->client encryption Trace: Initialised AES256 GCM server->client MAC algorithm (in ETM mode) (required by cipher) Trace: Attempting keyboard-interactive authentication Trace: Server refused keyboard-interactive authentication Command: Pass: * Trace: Sent password Trace: Access granted Trace: Opening session as main channel Trace: Opened main channel Trace: Started a shell/command Status: Connected to 192.168.43.173 Trace: CSftpConnectOpData::ParseResponse() in state 3 Trace: CControlSocket::ResetOperation(0) Trace: CSftpConnectOpData::Reset(0) in state 3 Status: Retrieving directory listing... Trace: CControlSocket::SendNextCommand() Trace: CSftpListOpData::Send() in state 0 Trace: CSftpChangeDirOpData::Send() in state 0 Trace: CSftpChangeDirOpData::Send() in state 1 Command: pwd Response: Current directory is: "/home/root" Trace: CSftpChangeDirOpData::ParseResponse() in state 1 Trace: CControlSocket::ResetOperation(0) Trace: CControlSocket::ParseSubcommandResult(0) Trace: CSftpListOpData::SubcommandResult() in state 1 Trace: CControlSocket::SendNextCommand() Trace: CSftpListOpData::Send() in state 2 Trace: CSftpListOpData::Send() in state 3 Command: ls Status: Listing directory /home/root Trace: CSftpListOpData::ParseResponse() in state 3 Trace: CControlSocket::ResetOperation(0) Status: Directory listing of "/home/root" successful

i always get this error on my ftp can you please help me ?

Hi,

This comes with new (very last news version).

When you uses this : 1- upload a new version of a file with a different name. 2- after upload : rename the file and give the name of the file which is to be replaced

Before, with previous version, you get : 1- A panel to confirm (existing file with same name : replace) 2- Replacement 3- (in previous-previous) the position into the list was not changing

Now, new ( 3.32.0) you get : 1- A panel to confirm (existing file with same name : replace) 2- Both files are deleted, this most of time (there are conditions which produce the normal - old - behavior, but I could not find exactly the conditions. Note :

• that when this occurs we have two refreshes (since-prev-prev : I have not the version id) of screen while before we were getting this refresh just once.
• with the "just before version" the refresh was not clean because we had, as told, two displays and at the end the user was reaching the top of the list and had to go back manually to the position of the file changed to verify.
• now when it functions normally the file is replaced and focus stays on the file (generally for the two files : I name the new updated with a name so that it will be displayed just before the file to replace into the list). I think that the second display corresponds to the "delete all" invalid phase.

Best regards

Trebly

If you delete a group that is assigned to users it will ask you to either assign it to a new group or delete the affected user accounts. The cancel button is in German ans says "Abbrechen" my system is in English so I would say this is a bug.

Since 3.26, we've had a few users report that once they log in and begin to try and transfer files, they are suddenly logged out, and then asked for their password again. Putting in their password again is not accepted (says its incorrect), so now the user cannot do anything else. Closing Filezilla down and opening it back up has no effect.

To make matters worse, in our environment, we use Red Hat's IDM LDAP server (based off of the Free IPA project). When this happens to these users, their account in IDM is locked due to too many failed logins and an administrator has to go into the IDM server and unlock the account.

The test suite no longer passes for me with 0.12.2 on Arch Linux. Not sure what is going on here and the test log doesn't seem too helpful, but maybe you know what's wrong.

If you need any more info please tell me. Sadly it seems I don't get a core dump and I'm not sure where that's disabled

===============================================
   libfilezilla 0.12.2: tests/test-suite.log
===============================================

# TOTAL: 1
# PASS:  0
# SKIP:  0
# XFAIL: 0
# FAIL:  1
# XPASS: 0
# ERROR: 0

.. contents:: :depth: 2

FAIL: test
==========

........terminate called after throwing an instance of 'CppUnit::Exception'
  what():  assertion failed
- Expression: fz::dispatch<fz::timer_event>(ev, this, &timer_handler::on_timer)

It keeps transfering the files every time I send FTP no matter if file has changed or not

From ticket 11603. With the port blank I still receive an error. I have attached a screenshot of the issue without the port filled in.

Amazon S3 integration is great. However, there is a huge limitation. Whenever, I upload new files through FileZilla, they do not get the appropriate permissions of the containing folder.

What's worse when I try to mass apply the permissions to a selected group of files, the interface only applies permissions to a single file.

The only workaround is a 2-step process of upload using FileZilla and then reapplying the permissions on the folder level of Amazon S3 bucket using the AWS management console.

Possible solutions would be to 1.) iterate through the selection applying the permissions to every file in the selection. OR 2.) allow the applying of permissions on the folder level (currently the interface just shows a dialog as though it were connected to a Linux server, so there is no way to set permission on a folder within Amazon S3 using FileZilla 3.) automatically apply the appropriate permissions of the Amazon S3 folder immediately after the initial upload

I'm using FileZilla version 3.33.0, on macOS High Sierra on an iMac, 21", Mid 2011. To use the "at" (@) key on my Spanish ISO keyboard I must pres Alt + 2 (both keys together). This works in all applications and screens o the system, but it's not working in the top most fields of Filezilla , where you enter Host, Username, Password and Port for Quickconnect. It seems to be using some other keyboard layout, just for that part. Specifically for the "@" character it shows nothing. If I use the keyboard on other places of Filezilla client (comments, etc.) the keys seems to be ok. This didn't happen with the previous version.

When I try to upload files and folders now, instead of properly doing so, filezilla client on windows 10 is using a dot instead of a slash for the last part of a path in a directory name or file name.

For instance, if I try to upload a file into my root public_html directory (centos 7/cPanel) for any domain, where the file name is for instance, index.html and the upload path is /home/myadm/public_html, instead of placing the file in the public_html folder, filezilla is creating the file in /home/myadm as public_html.index.html.

Similarly, if I try to upload style.css to /home/myadm/public_html/css, instead, filezilla is creating a file in /home/myadm, called public_html.css.style.css.

HELP!!!

/trunk/source/Interface/StatusCtrl.cpp r8791

void CStatusCtrl::DoStreamIn(int extraFlags) {

EDITSTREAM es; es.dwCookie = (DWORD)this; Pass a pointer to the CString to the callback function es.pfnCallback = RichEditStreamInCallback; Specify the pointer to the callback function.

StreamIn(extraFlags | SF_RTF, es); Perform the streaming

}

void CStatusCtrl::DoStreamIn(int extraFlags) {

EDITSTREAM es; es.dwCookie = (DWORD_PTR)this; Pass a pointer to the CString to the callback function es.pfnCallback = RichEditStreamInCallback; Specify the pointer to the callback function.

StreamIn(extraFlags | SF_RTF, es); Perform the streaming

}

Hi,

Tried to uploading the data into remote server, Every 19 secs coming up with error. Error : Network Error : software caused connection abort file transfer failed

Is anyone able to help with this please?

Thank you.

I always have to reupload audio files when the program says they were successful. Never fails that I have to upload again.

Hello!

Currently when I upload an image to a specific sub folder, the image is uploaded successfully, but then will not show up on the live site, even after waiting multiple days, and clearing my cache.

The images will work properly when uploaded to the Incoming folder, but not each subfolder within the Incoming folder.

Would you be able to help me figure out why uploading to these folders is not working, even after we get a successful message.

Thank you, Melissa

Hi,

this is what happends if i try to update:

​https://sheepchen.net/nextcloud/index.php/s/rk0TWHVuwpzl3gH

Form said "can't be downloaded", but logging says "transfer successfull"

After updating from 3.33.0 to 3.34.0, selection pane in site manager (pane with site tree) is too narrow to display its contents and can't be resized.

See region circled in red in attached screenshot.

I was told there was an update so I did the auto updated and during the download of the new update I get "Error opening file for writing" in c:\Program Files\FileZilla FTP Client\filezilla.exe. Now the program and all my settings have been removed :-(

On starting, FileZilla pops up this error box:

Error loading xml file

The file 'C:\Users\jcarnuccio\AppData\Roaming\FileZilla\filezilla.xml' could not be loaded. Error parsing end element tag at offset 8160.

For this session the default settings will be used. Any changes to the settings will not be saved.

OK

and it looks like all previous settings are lost.

Hey, I having an issue with filezilla on uploading files and editing them from the server. the problem accure on any server and not on specific one. I have tested with diffrent file editors and computers but the problem still stays. this issue very interupt me while working while editing files on live site and the files doesn't uploaded at their full weight.

I have logged the issue while I did try to edit a file and it uploaded only part of the full file (it's not even 0.5mb file..) here is the log:

2018-06-26 10:57:43 21792 3 Status: Starting upload of C:\Users\leon\AppData\Local\Temp\fz3temp-2\index.php 2018-06-26 10:57:43 21792 3 Command: CWD /public_html/itcare 2018-06-26 10:57:43 21792 3 Response: 250 OK. Current directory is /public_html/itcare 2018-06-26 10:57:43 21792 3 Status: Retrieving directory listing of "/public_html/itcare"... 2018-06-26 10:57:43 21792 3 Command: TYPE I 2018-06-26 10:57:43 21792 3 Response: 200 TYPE is now 8-bit binary 2018-06-26 10:57:43 21792 3 Command: PASV 2018-06-26 10:57:43 21792 3 Response: 227 Entering Passive Mode (5,100,252,97,162,223) 2018-06-26 10:57:43 21792 3 Command: MLSD 2018-06-26 10:57:43 21792 3 Response: 150 Accepted data connection 2018-06-26 10:57:43 21792 3 Response: 226-Options: -a -l 2018-06-26 10:57:43 21792 3 Response: 226 4 matches total 2018-06-26 10:58:12 21792 3 Command: TYPE A 2018-06-26 10:58:12 21792 3 Response: 200 TYPE is now ASCII 2018-06-26 10:58:12 21792 3 Command: PASV 2018-06-26 10:58:12 21792 3 Response: 227 Entering Passive Mode (5,100,252,97,168,133) 2018-06-26 10:58:12 21792 3 Command: STOR index.php 2018-06-26 10:58:12 21792 3 Response: 150 Accepted data connection 2018-06-26 10:58:13 21792 3 Response: 226-File successfully transferred 2018-06-26 10:58:13 21792 3 Response: 226 0.315 seconds (measured here), 264.48 Kbytes per second 2018-06-26 10:58:13 21792 3 Status: File transfer successful, transferred 87,358 bytes in 1 second 2018-06-26 10:58:13 21792 3 Status: Retrieving directory listing of "/public_html/itcare"... 2018-06-26 10:58:13 21792 3 Command: TYPE I 2018-06-26 10:58:13 21792 3 Response: 200 TYPE is now 8-bit binary 2018-06-26 10:58:13 21792 3 Command: PASV 2018-06-26 10:58:13 21792 3 Response: 227 Entering Passive Mode (5,100,252,97,157,193) 2018-06-26 10:58:13 21792 3 Command: MLSD 2018-06-26 10:58:13 21792 3 Response: 150 Accepted data connection 2018-06-26 10:58:13 21792 3 Response: 226-Options: -a -l 2018-06-26 10:58:13 21792 3 Response: 226 4 matches total 2018-06-26 10:58:13 21792 3 Status: Directory listing of "/public_html/itcare" successful

If you need any more information please inform me. filezila version 3.33.0

I keep gettying a notice that my SSL cert. is expired. I just applied all new certs. in May and they are posed on the servier and works on other items.

How can I stop this. The check box is grayed out and can not click it.

Upon completing a download, FileZilla always records the following:

Status: Disconnected from server Response: 421 Timeout - try typing a little faster next time Error: GnuTLS error -110: The TLS connection was non-properly terminated. Status: Server did not properly shut down TLS connection Status: Disconnected from server: ECONNABORTED - Connection aborted Status: Disconnected from server

This is a HostGator site.

Hi, when i minimize Filezilla to tray there are 2 identical tray icons instead of just 1 icon. This looks messy and isn't necessary.

I have create my own FTP Server which dialog correctly with the file zila client. But when I rename a directory which I don't have the authorization to renamed it, the server refused the RNFR commadn and send 550 "access denied" but the file zila client don't take in count this reponse and rename the direcotory. I'm obligate to restart the file zila client to use it correctly.

I'm building FileZilla 3.35.1 on macOS High Sierra, and the make command fails due to missing dylibcopy.sh:

make[2]: Entering directory `/opt/local/var/macports/build/_Users_yen_Projects_macports-ports_www_FileZilla/FileZilla/work/filezilla-3.35.1/src'
"../data/dylibcopy.sh" "../FileZilla.app"
/bin/sh: ../data/dylibcopy.sh: No such file or directory
make[2]: *** [dylibs.copied] Error 127

Looked into the tarball, there's data/dllcopy.sh but no data/dylibcopy.sh. I assume there's something wrong during the tarball generation process?

Our normal Filezilla processor is out for an extended period of time. With doing backup work I have come to notice our Filezilla is not linked correctly to Verafin. We load our ACH files to Filezilla and they transport them over to Verafin and then kicks out an e-mail letting us know they were loaded successfully. Verafin claims on the days myself and another co worker did the files they never received files to check. We have contacted our IT and now Verafin. Both are claiming an issue with Filezilla and having the correct authority. We do have one user here and everything works for hers if you need to check things out on her side. I will say Both mine and my co workers computer say we need updates. They wont allow us to load, needing passwords?

The bookmarks are gone. Menu only contains "Add" / "Manage".

macOS 10.13.5

Launching 3.34.0 afterwards shows the bookmarks so they are physically still there.

Steps to reproduce issue: 1) Launch FileZilla client application. (you do not need to be connected to a remote host to experience this bug.) 2) Select a file in the left (local site) list pane. 3) Initiate file rename mode using either F2 function key, OR right-click-menu -> rename, OR click-pause-click. 4) Modify the file name by adding a character to the end 5) Press enter.

Observe that the file will appear to revert back to its original name.

6) Refresh the file list by F5 function key, or right-click -> Refresh, or View-menu -> Refresh

Observe that the file was indeed renamed.

Additional info: This behavior only happens in the local site file list. If you rename a file on the remote site file list, the list will auto-refresh and present the correct file name.

This is what I get every time I try to login.

"Status: Resolving address of bbhs.com Status: Connecting to 74.220.215.78:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Error: Server sent unsorted certificate chain in violation of the TLS specifications Status: Verifying certificate... Status: TLS connection established. Command: USER bbhscom Response: 331 User bbhscom OK. Password required Command: PASS * Response: 230 OK. Current restricted directory is / Command: SYST Response: 215 UNIX Type: L8 Command: FEAT Response: 211-Extensions supported: Response: EPRT Response: IDLE Response: MDTM Response: SIZE Response: MFMT Response: REST STREAM Response: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; Response: MLSD Response: AUTH TLS Response: PBSZ Response: PROT Response: UTF8 Response: TVFS Response: ESTA Response: PASV Response: EPSV Response: SPSV Response: ESTP Response: 211 End. Command: OPTS UTF8 ON Response: 200 OK, UTF-8 enabled Command: PBSZ 0 Response: 200 PBSZ=0 Command: PROT P Response: 200 Data protection level set to "private" Status: Logged in Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (74,220,215,78,175,249) Command: MLSD Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listing Status: Disconnected from server Status: Resolving address of bbhs.com Status: Connecting to 74.220.215.78:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Error: Server sent unsorted certificate chain in violation of the TLS specifications Status: Verifying certificate... Status: TLS connection established. Command: USER bbhscom Response: 331 User bbhscom OK. Password required Command: PASS * Response: 230 OK. Current restricted directory is / Command: OPTS UTF8 ON Response: 200 OK, UTF-8 enabled Command: PBSZ 0 Response: 200 PBSZ=0 Command: PROT P Response: 200 Data protection level set to "private" Status: Logged in Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (74,220,215,78,179,175) Command: MLSD Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listing"

FileZilla Client

Version: 3.35.1

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2018-07-23 Compiled with: x86_64-w64-mingw32-gcc (GCC) 6.3.0 20170516 Compiler flags: -g -O2 -Wall

Linked against:

wxWidgets: 3.0.5 SQLite: 3.22.0 GnuTLS: 3.5.18

Operating system:

Name: Windows 10 (build 17134), 64-bit edition Version: 10.0 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 Settings dir: C:\Users\Glynn Myers\AppData\Roaming\FileZilla\

Double-clicking a file in the remote site window used to open the file in the editor. Now it downloads the file to the local directory. Behavior changed upon update to v 3.35.1

Hi, Today I opened my FileZilla, as in every day for several years. In the opening, I had an update to be made dating July 23rd, 2018 for the version 3.35.1. I clicked to Update. After a few seconds, an error message appears to me, "an error arrived at the update". I had only the choice of the button "Cancel". I clicked to cancel. Afterward I had no more icon of FileZilla on my desktop, on my fast bar, nothing. I verified those folders of FileZilla.

There were only 3 folders. The first one is: C:\Program Files\FileZilla FTP Client\ with a single entitled file "Uninstall".

The second one is : C:\Users\xxxx\AppData\Roaming\FileZilla\ with 1 SQLITE3 file and 6 XML Documents.

The last one is: C:\Users\xxxx\AppData\Local\FileZilla\ with around 320 PNG files.

I had no execute file, or file to updated. I could not use the software. I restarted the PC and nothing changed. I am not certainly the only one to have had this problem. I would have liked registering you the code of error and the exact text, but I clicked on the button too fast. Sorry.

For now I downloaded the complete version on your site. That works. I had a waste of considerable time for my company.

Claude.

Used to auto connect to the server i use and automatically keep last folder local i was in, but now it no longer does that.

i have 'restore tabs and reconnect' selected but - it won't

When using slow (satellite) connection, uploads files at partial or zero length, tries a few times, them marks them as successful transfers. The dual directory shows them in green as if the lengths matched. Log report reports occasional timeouts, but otherwise normal.

A second attempt immediately reports successful transfers, despite the the file lengths being obviously different. I have to kill the partial files and try again. I am averaging ten attempts, whether for a single file or a batch of a dozen. See screen cap.

Hello,

I added 315943 files to the queue. Filezilla just cycles through 'elapsed time' and 'Transferring' on two files but not actually transferring them.

I've had this queue trying to transfer for over a week and a half. I've stopped the queue and reinitiated several times.

Initially the transfer was interrupted by the computer being restarted and I haven't been able to resume this transfer. Please let me know if you have any ideas on how to fix this issue. Thank you

Hi. I've used FZ for many years. Love it.

I've had an issue crop up since the upgraded to 3.36.0. When connecting via explicit TLS it freezes for 3 minutes, then won't connect. And finally windows reports that FZ has stopped working.

This is on a site that has been working on explicit TLS for years. Another oddity is that when I go to help->Check for updates..., it's never able to connect. It checks continuously until I close the window. It never connects and tells me I have the latest version.

I've attached the log.

Note, this is not an emergency. I'm able to connect via sftp and everything works normally there. I'm must reporting the bug so it can get looked at in due course.

Here the log file

2018-09-03 13:51:16 7468 1 Status: Auflösen der IP-Adresse für kdbtst.eu3.biz 2018-09-03 13:51:16 7468 1 Status: Verbinde mit 185.176.43.78:21... 2018-09-03 13:51:17 7468 1 Status: Verbindung hergestellt, warte auf Willkommensnachricht... 2018-09-03 13:51:17 7468 1 Antwort: 220 ::ffff:185.176.43.78 FTP server ready 2018-09-03 13:51:17 7468 1 Befehl: AUTH TLS 2018-09-03 13:51:17 7468 1 Antwort: 500 AUTH not understood 2018-09-03 13:51:17 7468 1 Befehl: AUTH SSL

Provider denies and answers: WE ARE SUPPORTING FTP OVER TLS

What must I do ??

Steps to reproduce:

1. Open client.
2. Connect to host.
3. Ctrl+F, than start enter digits
4. Get error

I have a Windows 10 virtual machine on a Mac. In windows explorer, I have 2 drives, "Home on 'Mac' (Y:)" and "AllFiles on 'Mac' (Z:). In prior versions of FileZilla, these drive show on my local site: side.

Although I work mostly in Windows, I store some things on the Mac side.

I updated my FileZilla to the current version, 3.36, and now those Mac drives no longer show. Looking through all the menu items and icons, I cannot figure out if there is some setting that has them not show or what to do to have them show.

To confirm that I could see those drives in a prior version, I downloaded an older version and they just show up in the local site tree.

Hi, there is a bug with uploading files to storj. I ve just test to upload few files and the progress goes upper then >100%. I stoped uploading manually on ~130%. Actually i don't know what Filezilla try to upload when file size less than 790mb but uploaded more then >1300mb.

MAC OS X SIte Manager Sroll overlap entries

I have to attach screenshot to ticket.

На последней версии программы FileZilla_3.36.0_win64-setup перестало подключаться ко всем серверам. Вернулся на раннюю версию FileZilla_3.31.0_win64-setup и все заработало. А перестало работать сразу после последнего обновления.

On the latest version of the program FileZilla_3.36.0_win64-setup stopped connecting to all servers. I returned to the earlier version of FileZilla_3.31.0_win64-setup and it all worked. And stop working right after the last update.

In testing a webcam's FTP uploads, I have a need to do multiple recursive downloads every few minutes to verify that new image files are successfully getting uploaded. Since my webcam uploads are going into multiple directories by day and hour, it is easiest to do a recursive download from the top level. I am doing this by dragging the root webcam folder from my ftp server to my local directory in FileZilla. The recursive search works successfully the first time, but then subsequent drag/drops of the root folder will not actually re-scan subdirectories, but rather only use locally cached information of the remote directory structure. So I am missing newly created files on the remote server to download since the first time I downloaded in this FileZilla session.

It appears that it will eventually do a forced full re-scan of subdirectories (observations indicate that this could be every 15 minutes or so), but not on every drag/drop. Clicking on the "refresh the file and folder lists" icon only refreshes the top level folder and not any subdirectories.

Steps to reproduce:

1. On the "remote site" zone, right-click and choose "create directory"
2. Choose a directory name and click OK

Expected behaviour: The directory listing should be refreshed and the new directory should be shown with its permissions (drwxr-xr-x or whatever) and its owner/group.

If you right-click on it and choose file permissions, the current permissions should be shown (usually 755 which are the default permissions when a new folder is created)

Observed behavior: After the folder is created, the directory listing is refreshed and you see the new folder, but the permissions and owner/group are not shown.

If you right click on it and choose "file permissions", you can't see what its current permissions are: you see "xxx" instead of 755. If you manually refresh the directory listing (such as clicking the refresh button on top, or leaving and reentering the containing folder), then the file permissions are shown.

This bug has was first reported on Launchpad for FileZilla 3.3.1 ​https://bugs.launchpad.net/ubuntu/+source/filezilla/+bug/747573

After turning off sync folder switching you can't switch folders in the local file window. Opening new connection "solves" the issue. Local folder view drops back to user files location.

OS: Windows 10 Pro x64 Filezilla Client: 3.37.0 Target Computer: Ubuntu 16.04.5 LTS (openssh-sftp-server)

Connection type SFTP

Issue: I have no network connectivity issues between client and target. Filezilla connects just fine and can navigate around and upload small file. I recently upgraded to 3.37.0 and ever since then when i try to upload a large file (1.5G .zip file) it starts the trasnfer, gets to about 800 kb and then Errors out with Network Error: Software caused connetion abort. File Transfer failed. I tried using another ftp client and the trasfer worked just fine. I've been using filezilla with this server for years with no issues until recently.

Hello, following the update of Ctte night (from 18 to 19), FileZilla Propoé me to install its new version. And then there's nothing. Well, I know, I had not backed up the data for connextion and so much the worse for me. Nevertheless, I was able to export two, the only ones that stay. Despite the good FTP data, no reaction for the connection. J says that I therefore have: 1/Export the two connections that were proposed to me. 2/That not working and having lost the other 31, reinstall Filzilla. And there's still nothing. So before you come in manually, a hand? Thank you very much. Well cordially Karim

I have several sites in Site Manager all of which have Synchronized Browsing set. Regardless of which site I select, the server is correctly accessed but the local folder remains unchanged (ie it stays as the last folder accessed even when Filezilla exited and restarted). Synchronized Browsing remains not set in View menu.

No errors of any kind in message log (addresses removed):

Resolving address of ftp.xxxxxx Status: Connecting to xx.xx.xx.xx ... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Logged in Status: Retrieving directory listing of "/"... Status: Directory listing of "/" successful

It appears that the message log at the top has now changed to a dark grey background, with messages showing up with a white background. No functionality issue, purely aesthetic.

FileZilla 3.37.1 on macOS 10.14 beta 18A389.

Not sure if this was an issue with this specific release of the Mojave beta, but 3.37.0 did not seem to exhibit this issue on the same Mojave release prior to updating.

Filezilla on macOS Mojave has a few issues which include the following:

1) Dragging files from a folder to the server causes the client to crash. You can still highlight and click upload by right clicking through the context menu 2) UI issues with the dark theme (it's difficult to see) 3) UI issues with the client size (it starts huge and needs to be resized smaller)

These issues make the client very difficult to use on macOS.

1. The Limit for Concurrent Downloads setting over-rides ALL Global and Individual site settings for Transfers!

2. The Queue Priority setting also over-rides the User setting for Maximum Multiple Connections of Individual for sites.

Flexible User settings are no good if the program takes no notice, like the Concurrent Download Limit setting controls everything to do with transfers. As does the Priority.

Eg. For a Session

• Maximum Simultaneous Transfers = 10
• Limit for Concurrent Downloads = 5
• Limit for Concurrent uploads = 0
• Site 1: 10 Queued transfers, Priority Normal, Maximum Multiple Connections = 3
• Site 2: 10 Queued transfers, Priority High, Maximum Multiple Connections = 3

Process the Queue and five Transfers will all start at once from Site 2; instead of two Transfers from Site 1 and three Transfers from Site 2; This blows-out Site 2 because it has a max number of connections/session of 3. Also, despite the Maximum Simultaneous Transfers being higher, whatever the Limit for Concurrent Downloads is set to, that is the number of transfers that will try to start, not 10. Also, setting the Priority up or down has a similar effect.

My thoughts:

1. Globally: The “Maximum Simultaneous Transfers” should be the only setting to determining the Maximum number of Transfers that FileZilla starts at any one Session. (ps: 10 also seems a bit small in these days of High-speed Broadband).

2. Globally: Limit for Concurrent Downloads should perhaps be Limit for Concurrent Downloads per Site; and determine the maximum number of Transfers to start on any Site at one time, UNLESS the Maximum Multiple Connections is set.

3. Locally: Limit for Concurrent Downloads per Site should not override the Maximum Multiple Connections setting.

4. Locally: Queue Priority should not override the Maximum Multiple Connections setting.

Hope this helps Tranowme

When I upload a file from my computer to the remote site, it says the transfer is successful, but it never appears in the new location. I am on the latest version. Help!

I have version 3.37.1 of Filezilla Client. When I try to update to 3.37.4 I get the message, "FileZilla appears to be running." After aborting the installation, a check of task manager does not show any instances of FileZilla running. I tried several times with the same result.