Custom Query (2163 matches)

Ever since 3.3.4, Files will get to 100% normally then sit in the queue until it gets a timeout message then be listed as 'failed'. I must requeue and requeue and requeue until all are successful. Response: 150 Accepted data connection Response: 150 Accepted data connection Response: 150 Accepted data connection Response: 150 Accepted data connection

--> In here bars go to 100%

Error: Connection timed out Error: File transfer failed Error: Connection timed out Error: File transfer failed Error: Connection timed out Error: File transfer failed Error: Connection timed out Error: File transfer failed

For Windows user a lot of people used the shortcut key CTRL-X for cut and CTRL-V for paste. I have been using cut & paste in CuteFTP but in the FileZilla I didn't see any cut & paste feature. Please utilize the mv command for this feature. For instance, let say user want to move file1.rar from /public_html/xxx.com/ to /public_html/yyy.com/docs/ He can browse to the dir xxx.com then click file1.rar, press CTRL-X. FileZilla some how store the current path of file1.rar. Then user go to the yyy.com/docs/ dir, then press CTRL-V, Now FileZilla will store the current path then perform the mv command to move the file1 from the previous stored location to the new one.

Sorry about my bad english!

Hi

I am using newer filezilla "3.3.4.1" But i am reporting a bug for previous version "3.3.4"

While using FileZila "3.3.4" i faced a problem like all the existing site manager entries got duplicated automatic, there are more than 200 sites are stored in Site Manager & those are automatic duplicated to 400.

And also there is no multiple selection option to delete all duplicates sites at one go.

and if i am delete middle entry the scroll bar gets up after deleting site , its not stay at the last moment

FZ v3.3.4.1

When you drag-and-drop in the remote panel, a plus-sign appears, implying that the file will be copied. But actually the file is moved. Holding the Ctrl key down while dragging still results in a move operation.

Get rid if the plus-sign, and preferably make the Ctrl key modify the drag-and-drop behaviour.

Something that crossed my mind while I was busy with several FTP-connections.

If you have FTP-connections in several tabs, rightclicking the tab allows you to set a priority to that connection.

Having the right click popup functions for the upload / download menus are great but most all the functions on the menus could use hot keys. Especially view/edit. Although the upload/download have a built in hot keys of double click or drag. Luckly most of the first letters are only used once except for refresh & rename plus create & copy. So here are my hot key suggestions A E O C R N=rename D V F U=Copy Url Fig thats it. Love the software.

When reconnecting to a server after losing my internet connection, or after a timeout, I frequently receive the cryptic error message:

Error: input_pushback not null!

I am not sure what this error means, or what causes it, but retrying always makes it go away. It would be rather nice if the system would do at least one retry of the current operation when this error occurs, thus avoiding the need for both the error message and the manual retry.

This feature request references ​This Thread.

Currently, it seems as if once you turn a filter on it applies to every site until you turn it back off. What I'd like is to hide directories on a site without needing to worry about enabling/disabling filters every time I connect to a different site. As I've got a couple hundred FTP's, I really want to avoid having to find each one's filter every time I connect.

I envision having a new tab or fieldset in the Site Manager for each site where you can choose from a list of filters to apply by default. e.g. John.com may have Filter A applied by default whereas Jane.com may have Filter B and Filter C applied by default.

While there are, yes, many ways around this, it would be nice to have this feature available.

When you click and drag a file up, it does not scroll up to the folders, but rather sits and stalls.

The video attached will help clarify what I am requesting.

I have been trying to upload some directories and files to my yahoo small business ( YSB ) account but every time YSB gets a directory or filename with a space in it, it refuses it and the upload fails with a "Critical file transfer error" - "553-Names must contain only ASCII letters (a-z,A-Z), digits (0-9), underscore, dot and dash." They don't like spaces in filenames :-(

First - I think we need to be able to have the invalid characters feature apply to Uploads, not only downloads.

Second - It would be nice to be able to specify which characters to replace instead of having them hardcoded to \/:*?"<>| That way we could add a space and have it be converted to an underscore during the upload. Or at least expand the hardcoded invalid characters by adding a space.

Updates are frequent with FileZilla. It seems that each update deletes and then recreates the FileZilla shortcut on the desktop. The consequence is that any customization of the shortcut, especially the keyboard shortcut (in my case Ctr+Alt+F) gets lost. Thanks jean-louis

Since a former update (maybe FileZilla 3), the possibility of jumping to a location on the directory tree by pressing a letter on the keyboard has been lost. I suspect that is has been lost on the local directory panel first, and now on the distant directory panel as well. Note that it is still preserved on the file list panels.

The possibility of navigating using the keyboard is important for users like me who appreciate "mouseless" fast interaction.

An option to add would be to have an optional rule that would allow you to set a a different transfer for user.

It would be nice to be able to exclude certain IPs or IP ranges from logging so that activity from monitoring and load balancer systems could be excluded from the log files.

Other than that this is the greatest FTP server product out there!

FileZilla is not high-DPI aware on Windows 7 or Vista. This means that if you set your PC's display resolution to the maximum supported, and compensate for the resulting small default GUI font by increasing the DPI setting, FileZilla's text is blurred because it is raster scaled. This is explained in the following tutorial:

​http://msdn.microsoft.com/en-us/library/dd464659(VS.85).aspx

To reproduce on Windows 7:

1. Right click the desktop and choose Screen Resolution.
2. Make sure that it is set to its recommended value.
3. From Control Panel, choose Display.
4. Under "Make it easier to read what's on your screen", select "Larger - 150%".
5. Click Apply.
6. Log off and log on again.
7. Start FileZilla and observe that the text on its UI is blurred.

The solution may be as simple as linking in the attached manifest file and testing that all text still fits in objects such as buttons, so I hope you'll try it. It'll help those of us getting presbyopia to put off the day when we need spectacles to read the screen!

The filter and comparison buttons both have two functions.

For consistency with the Site Manager button I suggest that those buttons use Split buttons

win32 version but i think error exist on all OSes.

1) start FZ with 2/3 Mo of the file already on the remote server on the first screen, i start FZ with "process queue" the file start at 0 not a 2/3 Mo so resume hasn't work

2) start FZ with 2/3 Mo of the file already on the remote server on the second screen, i start FZ with "process queue" the file ask me to resume or not and if i choose resume start at a 2/3 Mo so resume worked well

"critical" flag is selected coz i was not happy than resume has not worked when i resumed at 95% a file of 4 GB !!!

ps: screenshot files will be added later if i can upload before create the ticket else i will use imageshack

On Windows Filezilla startup or connection to a site where the default local directory configured in Site Manager is not available Filezilla hangs for minutes while OS attempts access.

As to my knowledge the timeout is enforced by Windows I humbly request some means of flagging off/on Filezilla attempting to open the directory configured in Site Manager for all My Sites.

Eg. At office and connected to NAS/mapped drives. USE DLD -> ON At home and NOT connected to NAS/mapped drives. USE DLD -> OFF

A previous ticket, not mine: #1315

A minor issue...

When many tabs are open, FZ indicates unseen tabs to the left or right by means of a little arrow. (Aside: This arrow is grayed out when at the end of the list, but I'd prefer a much lighter shade of gray, as mine appears nearly black.)

Open a bunch of tabs, so that there are many unseen tabs to the left. Now close the rightmost tabs. Instead of unseen tabs coming into view from the left, blank space remains where the now-closed tabs formerly sat. Only when the last visible tab to the right is closed is a set of leftward tabs then brought into view. It would be nicer to maximize the number of viewable tabs as each is closed.

On the issue of maximizing the view, it would also be nice to be able to set the width (in characters) of the tab, in case a user can tolerate more, but shorter, tabs.

Finally, it would be great to have a customizable tab display using formatted fields, as with date and time, by creating a spot at Settings/Interface/Tabs. Presently, the display is of the form "Sitename - Server" (perhaps this might be indicated by a format string "%n - %s", e.g.). My server is always the same, so I have a lot of wasted characters on my tabs. For me, "Sitename-Remote folder" (%n-%r) would be far preferable, as I often wander from my original folder, leaving me several tabs with the same display, open to different folders. Long info could appear in the dropdown widget at the right (I love that thing), while compressed versions can be shown on the tabs (e.g., "FaveSite-.../Here/Now").

This is the sort of request that shows a user is spoiled rotten, which in turn indicates the already excellent state of a program.

Thanks,

Rick Mabry

Hiho,

in my opinion the server logging is quite poor. It would be useful that some information will be added, e.g.

• Transferred bytes at end of file transfer (up and down), this is needed to build a log analyser.
• Options to control the messages to the log file, the 200 replies are often superfluous.

Thanks in advance Agent Purple

hi,

when the preserve timestamps is enabled, and when uploading a directory with some sub directories inside, the existing directories of my local filesystem are not modified. (of course it's ok for my files as filezilla is a great app, developped by great guys)

it's not a big deal..

but maybe an option could be added for the timestamp option : 'ignore directories timestamp' in some case it would be very helpful for my eyes and my backup/restore ops.

kind regards,

Jerome fr

Is there a way to add to the "After Action Queue completion" the command to Remove Remote File?

I have used, run cmd , then use rm "/part/file.file" after completion.

The ability to select multiple files for transfer, then on completion, the client remove the remote file from remote site... I would love to see that feature added.

I transfer all the time using FileZilla, both work and pleasure. Thank you for such a great sftp solution!

I just thought about how often do we have to do backups, and it's actually pretty routine process, you have to copy file to your server, rename it, edit with w.e. you want and then upload it back.

What i suggest is adding an option to context menu, which with one click will make a backup file on server (same folder as the source file is located), it will copy the file with name like 'filename_bak.php'. This will make more people do backups.

I just created a SSL cert that is valid from today on for one year. Though, FileZilla Client 3.3.4.1 complains "11/10/2010 - Not yet valid!".

The filezilla.xml has 2 typos to fix:

1. <Setting name="Site Manager position" type="string">0 500 291 680 419 </Setting>

The value has a space at the end which isn't needed.

2. <Setting name="File doubleclock action" type="number">2</Setting> and <Setting name="Dir doubleclock action" type="number">0</Setting>

doubleclock should be named doubleclick.

I use Windows 7 and the FileZilla version is 3.3.4.1

If FileZilla in a root folder which name is begin with dollar sign like "C:\$Programs\FileZilla", FileZilla cannot change the UI language, and if FileZilla in folder like "C:\Programs\$FileZilla" than FileZilla cannot run.

When doing a large download which takes more than 1 hour the elapse time does not show the hour.

During multiple file transfers, it would be good to know what type of file transfer is being used for each file. Can the window at the bottom of filezilla client that currently displays file transfer status (green bar etc.) also display a column with file transfer type for each file?

Please add a new File Mask feature for each open session to allow display of files based on masking pattern. This new feature should be directly available on the session interface, not buried in the menu. One placement option is right next to the Site directory box.

In a directory where there may be hundreds of files, this feature will be very handy to reduce the long list of files displayed and can help quickly locate them.

The existing Filename Filters is a good feature, but cannot handle random filename selection as quickly and easily as a File Mask.

A typical file mask example can be found on WS-FTP client. I have to switch to WS-FTP every time when I need to use the file mask feature.

Thank-you.

When I choose "View/Edit" on a file, then edit in my editor, then save, FileZilla asks me to confirm uploading the changed file. I would like an option to not have to confirm, to make editing a remote file much more like editing a local file.

Summary: The shortcut CMD+ARROW_DOWN on the Mac should open files and directories, instead of transferring files.

Description: On Mac OsX, when the CMD and ARROW_DOWN key are pressed, the selected file will be downloaded. Everywhere else on the Mac, CMD+ARROW_DOWN is used to open the highlighted file or to enter the highlighted directory. I've made this mistake numerous times, to accidentally enqueue thousands of files from the server, when I just wanted to open a directory. This is particularly frustrating because on the Mac, the interface basically hangs while transfers are in progress, so there is no way to stop it.

When you use "fast connection", and the username is 'anonymous' (but you're not using an anonymous access), when you enter a password, the same password is changed and the client cannot connect.

Example: address: 10.20.30.40 username: anonymous password: hightower <-- this is changed to the default one when you try to connect

system-date: FileZilla Client

Version: 3.3.4.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2010-08-16 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.11 GnuTLS: 2.8.3

Operating system:

Name: Windows NT 6.1 (build 7600) Version: 6.1 Platform: 64 bit system

You are updating automaticly, so I think these data are correct.

Bug: 1. using a transfer of .gif or .jpg, Filezilla is sometimes forgotten it should be binary, so it transfers as a ascii file, result no image displaying. Nevertheless : these are not registered as ascii . 2. I use very often csv files ( comma seperated values = textfile ), can be dot csv , can be dot tsv or something else. Both are registered as transfer like ascii. Nevertheless : the software wants to transfer binary.

Would be very nice, to solve this problem.

I think that would be very useful to have the possibility to filter "all the files that have been modified Today", where today is not a date "as 2010-11-12" but is the actual date: i was editing something last night filtering all the files edited on 2010-11-12.

After midnight all the file disappeared (after midnight it was already 2010-11-13). It took a while to understand that that was the reason (I was very tired) but the point is that I have to change that filter every day!

While using a filter that allows to set dates as: + modified today + modified this week + modified last week + ... it would be faster (just set it ony the first time and it would last forever).

When I connecto to a server with FTPES, I get the dialog to confirm the certificate. I check "always trust" and click ok, but when I download the first file, I get asked again.

I think this problem started with version 3.3.4 or 3.3.5. It also appears that my cached trusted server certificates are not kept between updates.

If you have the directory tree enabled, the address bar is cramped into the space above that pane instead of spread across the two panes.

It's impossible to choose another directory because the dropdown cuts everything off after one or two levels. See attached.

Whenever you carry out actions through Filezilla, it's difficult to see if there were errors.

For example if you selected 20 files to delete but only 19 were successfully deleted, how do you know? An error flashes past on the message log but you'll almost certainly miss it. The same goes for a lot of operations. Even with transfers it's easy to miss the "Failed Transfers" tab.

You should replace the message list and transfer panels with one single operations panel, showing you the things being done, and if they were successful. Perhaps with important lines such as errors bubbling to the top.

The message list is pretty useless for 99% of the time. I mean, how is "Command: PASV" or "Response: 226-Options: -a -l" useful to most people?

For transfers of big files from an IBM Host (MVS, z/OS) to the local PC, files with >9999 tracks will not be shown in the "Server" file list-window. This happens in Version 3.1.1.1, 3.3.2.1 and the latest 3.3.5 Please check or contact me for further investigations or traces. Explanation: 1 track approx. 55KB

windows command-line arguments path is added, it becomes an error.

Directory listing failed

ex)command-line filezilla ​sftp://username:password@server/path

In the settings you have selected und 'File lists' that the 'double click action on files' is 'NONE'. When you have symbolic links on the server and you then double click the link the linked file is transfered with the name of the link. For us expected behaviour would be that nothing happens.

The behaviour is only experienced under Windows 7 !

I've seen this problem with several servers: when uploading a large file (e.g. 20 MB), FileZilla seems to starts uploading and then it's instantly at 100% (upload speed specifying 10 or 20 MB/s which isn't even possible with my connection).

Then it waits for a while (I think it is now in fact uploading actual data, even though it indicated it was already at 100%).

Then after a while it either says it's finished, but the file is uploaded only partially most of the time. Or it says "are you sure want to overwrite?" and then showing a smaller destination file (which didn't exist previously), i.e. it uploaded the file partially and now wants to restart, asking to overwrite the existing remote file (remote file = the part which it just uploaded).

Here's an FTP account in which I can reproduce this problem almost every single time:

host = ftpes://ftp.servage.net name = test86413 pasw = Test123 server type: FTPES (explicit TLS/SSL) (using default port 21)

I've just tested again with v3.3.5 (windows client), and it happened every attempt when I upload a 20 MB file.

I've seen this before with other servers as well, but this is the first time it occurs on a server on which I can easily make a test account for you to debug with.

Hope this helps!!

Would be good if an FTP site, incl. target folder could be represented as a shortcut in a folder so dragging and dropping a file on the shortcut uploads the file to the specifiec FTP site/folder, like dropping file on a folder shortcut in Win OS (or any OS). It saves time from starting FZ, selecting site, browse to folder, upload etc.

Hi,

I just was asked by a colleque who accidently deleted the files while transferring them from source to destination. Would it be possible to build in some kind of check so you cannot delete a file from the source if the the file is in the queue to be transferred.

thanks in advance.

You should add support for extracting archives(zip etc.) via FileZilla so they don't have to be extracted before with explorer or other software.

It'll also decrease upload time and will allow you to keep all the files on your HD archived.

Sorry if this has been suggested previously.

It seems that FileZilla server cannot handle path names exceeding the maximum path length of 260 character Windows sets by default. Using the Unicode versions of Windows API functions and the UNC file extensions would permit longer file pathes. More infos: Windows SDK - File names

Hey,

In your newest version of FileZilla Client (3.3.5.1) and also in the previous version (3.3.4.1) there is this bug. But in version 3.3.3 it works.

The problem appears when i try to import FTP-servers and proxy-settings by using the import function under the drop-down-menu „File“. The import of the FTP-Servers works great but the imported Proxy-Settings get lost after restarting FileZilla. The problem is on the following settings; the “FTP Proxy” and also the “Generic proxy”.

Some experiments have shown that the new settings won’t be stored in the filezilla.xml (%appdata%\FileZilla\filezilla.xml). By typing in the Proxy Settings manually it will work, but not by importing the settings via the import-feature.

I have discovered and tested this problem with Windows 7 Enterprise x64 once on a Intel core 2 duo and once on a virtual machine on my PC via WMware Player and a third time I tested it in a virtual machine inside of an ESX-Server always with Windows 7 Enterprise x64 -> every time the same problem.

I hope you can fix the problem.

If you need further information, just tell me!

Cadenas

Hi, I'am a speaker that produces from hit's own studio, and often I use filezilla client to put my files onto the ftp and send the link via email to my customers. I've been thinking in a facility to send files directly from explorer and copying the destination link into the clipboard. I imagine this: by selecting one or more files, when I click "send to ftp" from the folder context menu', filezilla compresses all the files in a single zip and then send it to an ftp, into a folder that follows the local disk folder structure. For example, if the file that I have to send is in c:\recordings and is called 1.mp3, I click on 1 with the right mouse button from the folder windows, I select "send to ftp" and it compress and then uploads the file in a folder called recordings, without showing windows. After the process is complete, the http destination link (partially defined by the user) is copied onto the clipboard and a beep or a popup can warn the user about the successful operation.

This adds to filezilla the capability of compressing files that is present into other softwares, and 2 to me is a very useful facilityto send link to files via email, like dropbox but with a own domain or server. Can it be done?

I have a large ps files lrecl=80 blksize=31200 in an MVS environment. When I try FTP the do´nt apear in the directory....That´s the reason that I can´t make drag and drop operations.... In attached file I send you some images to show this problem... If you have en sugestion I wondered...

regardas

Juan M Galeana G

Wow! What a list of feature requests. Well this one is certainly not life and death!

It would be a nice feature to add 'Copy Filename to Clipboard' to the right-click popup menu for files in the processing queue.

This would make it easier to be able to keep track of what files are being edited when similar files are open at the same time.

When attempting to delete a symbolic link on a linux server, filezilla 3.3.5.1 deletes the content of the directory pointed by the symbolic link links to and does not delete the symbolic link itself.

Tbhis is totally unexpected : FileZilla acts the opposite of the rm command.

The expected behaviour is to have the rm command equivalent :

When deleting a symbolic link, it should just delete the symbolic link.

1. Closing Site Manager with unsaved changes should cause confirmation prompt

Steps to reproduce:

1. Open FileZilla Client 3.3.5.1
2. Open Site Manager (Ctrl+S)
3. Create a new directory, move a few connection profiles in there
4. Push escape or press Cancel

Actual behaviour:

Site Manager cloes without saving changes, and without warning.

Expected behavoiur:

Site Manager should check whether changes have been made, and prompt the user if changes are to be saved or discarded

2. Pressing escape key whilst editing a Site Manager folder or connection profile causes the dialog to close

Steps to reproduce:

1. Open FileZilla Client 3.3.5.1
2. Open Site Manager (Ctrl+S)
3. Create a new directory, and while the edit box for the folder name is still editable, press escape

Actual behaviour:

Site Manager cloes without saving changes, and without warning.

Expected behavoiur:

Site Manager should cancel the edit opertion on the folder or connection profile and keep Site Manager open.

Hi!

FileZilla has an option to limit the number of files uploaded/downloaded at a time. Though very useful, this does not always meet factual requirements.

In the case that I download or upload large files (e.g. a server backup), I would like to transmit only one or two at a time. Same for downloading. While, when up/downloading many small files (e.g. html files) then the overhead takes much time and I would like to start a lot of transfers at a time.

Therefore I request the feature to additionally limit the number of file transfers by file size, e.g. "Limit concurrent downloads to [1] GB". So if I usually would like to limit to 5 files, but FileZilla find two files of 500 MB then it shall wait with further downloads until one of them has been transferred.

Thanks for reading :)

Hi, A small point, but it just caused a bit of a problem here. I was in the middle of a job and needed to ftp something. Ran Filezilla and was prompted to update to latest version. Approved it. At the end of the update process it said I had to reboot before I could use it, which meant closing down a load of programs that I was working in, losing my place in code etc. Perhaps you could put a warning BEFORE the update starts saying that a reboot will be necessary, then we can choose whether to do it then or not. Many thanks

On slow connections, when uploading a file to a server, sometimes it asks for overwriting, even if the selected file was not already in server.

I was downloading some php file using the veiw/edit function, before the file was fully downloaded I unchecked the "Process Queue" from the queued files list and then deleted it from the list using the delete button. Now when I enter the view/edit function again a popup window appears telling that "A file with that name is already being transferred". I think this is a bug because the file should be transformed because I deleted it from the list.

I am using Win-7/64 Professional. I have version 3.3.5.1 installed.

Description: When I click in the Local Site or Remote Site list areas and press a key on the keyboard to go to that letter of the directory, nothing happens, I am not advanced to that letter of the directory. However, in the FileName lists, the cardex functionality does work and pressing a keyboard letter does take me to that filename or folder letter.

What It should Do: I think that the functionality in the FileName list is correct. You click in that file name area and type a letter of the file or folder that you want to jump to and it takes you there. The Local Site / Remote Site lists should behave the same way.

I would think that the code to do this is already done and in the FileName area of the code. Perhaps make that a function to call from any of the list-box areas for cardex behavior.

Other Examples: Windows Explorer behaves correctly

Thank you for your time.

Some special FTP servers may require that ALLO command is used in upload. One could implement option for that.

Nowadays it only possible to clear whole the history.

One could implement also deleting items one by one from history.

One could ask confirmation before clearing the history.

I'm somebody with some mixed language settings. Have my Region and Language set as follow: Format to Dutch Current location: the Netherlands. Keyboard and languages default is English (United States) - US Current language for non-Unicode programs: English (United States)

I did upgrade to filezilla 3.3.5.1 and have my settings to "Default system Language" but get my filezilla in Dutch instead of English what would be expected. Not a major issue just to let you know it doesn't work correctly.

Translation locale names should not use country part without reason. Its use makes impossible to use translation in other countries that use the same language.

Country part should be used only in these conditions:

• You already have "canonical" translation (e. g. de_DE, fr_FR) done and you want to translate to a country specific dialect.
• You need to use country specific strings.
• You translate to locales that have exception from this rule: pt_BR, bn_IN, zh_TW, zh_CN (and other zh_*).

Here is a small bash script that fixes this problem for filezilla:

cd locales ; for LOC in bg_BG ca_ES@valencia cs_CZ da_DK et_EE eu_ES fa_IR fi_FI gl_ES he_IL hu_HU id_ID ja_JP km_KH ko_KR lt_LT lv_LV mk_MK nb_NO nn_NO pl_PL pt_PT ro_RO sl_SI sk_SK th_TH uk_UA vi_VN ; do mv -iv $LOC.po ${LOC/_??}.po; done

Feel free to pick de.po. I see it e. g. here: ​https://build.opensuse.org/package/files?package=filezilla&project=network

Problem.

I've currently synced the sitemanager.xml file across my windows and linux computers (using Dropbox). I have also setup apache home directories to run off /www (on linux) and c:/www (on windows). Therefore all settings are the same.

When using syncronised directories in filezilla, one version has c:/www and other other uses /www which means they are different and breaks the synchronisation on one of my computers.

Solution

It would be great if the windows machine read the drive letter separately which means the path was /www on both machines allowing a completely synced working sitemanager.xml file.

I am using filezilla in my daliy work, it works fine, but is seams that do not support Send kepp alive request via SSH connection, even though checked the options in settings window. When I return back to use it after long time work, the connection has timed out, but it still send such as "ls" command, I must cancel all opertions and refresh again to reconnect the server.

Hello, im sugesting a new button on filezilla. Filezilla have a download button for the files/folders, but, why dont have a move button on the same place? for FTPs that we have full access, i think this would be a great function.

Thanks for this great program Esteban

Can you please add an option to the Kiosk mode never to save the password, even if it is the same session. I have users who will keep Filezilla running 24x7 only to get around the having to type their password again.

What I want is in Kiosk mode to have the ability to remove the "Remember password for this session"

Thanks

Using the latest stable release for Mac OS X. FZ is using Command + M to both minimize the app to the dock (This may be a global shortcut on OSX.) and to bring up the manual transfer window.

I'm required to do a lot of manual transfers from a blind ftp site, for some reason I can only use FileZilla, terminal doesn't even work. Definitely not critical, but slight annoyance

The aim is to run the FTP Client without GUI on a NAS and select downloads via remote GUI or Web Interface.

Another (but not so good) option would be a command line based Filezilla client which loads prepared queues

I tryed to Connect to an FTP which runs on an B&R Programming Logical Controller (PLC).

(1) If i used the Anonymous User to log in, FileZilla successfuly connects to the C: Partition on the CF Installed in the PLC. But in this mode i can't change to the F: Partition. Short-Log: Befehl: CWD F: -> Antwort: 550 Guest access denied.

(2) So i tryed to use an Username (User: 1) with the Password (Pass: 1). This results in an Error after successfuly requesting the current directory. Short-Log: Antwort: 257 Current directory is "C:" Fehler: Verzeichnisinhalt konnte nicht empfangen werden

(3) If i use WS_FTP the whole thing works, so i thought the Log-File could give you interessting informations ... so i also added it. Connecting with User:1 and Pass:1

Would be happy if i can work with FileZilla in the Future, because of its other functions.

The Full Logs are in the File attached to this ticket.

I've tried to save this queue (with 11 files) but the XML generated was empty (attached).

Filezilla Version: 3.3.5.1 OS: win XP SP3

I suggest the feature save the queue in csv/txt form or another context menu item to allow save the queue on clipboard.

Hello, My filezilla program refuses to download videofiles from my humax 5200c when in the name german letters are used like the ringel-S β or signs like ö and like this. Using my microsoft internet exployer i can download them without problems. Can you fix this bug? Greetings, Peter

When I connect to an MVS host and try to add a bookmark to e.g. 'A036.FILES.XREF', I always get a popup dialog that says:

Could not parse remote path.

I get the same result with or without the enclosing quotes around the path.

FileZilla Client

Version: 3.3.5.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2010-11-21 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.11 GnuTLS: 2.10.2

Operating system:

Name: Windows XP (build 2600, Service Pack 3) Version: 5.1 Platform: 32 bit system

I have the latest version of Filezilla for Mac and am using Mac OS 10.5.8.

The problem is that the top of the Filezilla window is stuck under the Macs menu bar so I can't move the Filezilla window to a different location on my screen.

I took a screenshot of it but don't see anywhere here to attach it so you can see it.

Thanks

TAKES THE PASSWORD BUT DOES NOT SEND TO SERVER.

ANYTHING OVER 99 CHARS AND I CAN AUTHENTICATE.

Trace: Pageant is running. Requesting keys. Trace: Pageant has 0 SSH-2 keys Command: Pass: Trace: Sent password Trace: Access denied Error: Authentication failed.

WORKS WHEN I CHANGE LENGTH OF PASSWORD

Steps to reproduce:

• connect to a server
• wait some time, so the connection times out
• upload a file: filezilla will automatically reconnect in order to upload the file
• wait until the upload finishes

Expected result:

• the remote directory listing should automatically be refreshed and you should see the file you just uploaded

Observed result:

• the remote directory listing is NOT refreshed, and you don't see the file you just uploaded

In the console window where you see all the commands and responses, you do see a message saying "directory listing succesfull", so I guess filezilla does retrieve the listing but it fails to show the updated directory listing in the display on the right.

If you manually refresh using the refresh button, then you'll see the directory listing refreshed including the just uploaded file.

This only happens when you upload a file after the connection has timed out (and filezilla automatically reconnects). If you are already connected when you do the upload, then the refresh does work correctly and you seen the refreshed list as soon as the upload is finished.

It would be great to have a 'Last downloaded' date column at the client right side listing

What if FileZilla could be used as a download manager for browsers? It could either hook into the browser, and be set to the default download manager; or, perhaps when you right-click a link, you could have the option of "Download with FileZilla"?

I tried to download a file from my FTP server when another user had finished uploading it. FileZilla still showed a file size of 12 MB because I hadn't refreshed it, so for the actual download of 20 MB it took "more than 100%".

Maybe FZ should automatically refresh the file listing before estimating download times.

On the left panel I have opened files from my PC, on the right panel I have FTP files from server.

When I change or rename any files in my PC with my HTML editor and save them back on my PC, the files on the left panel in Filezilla remains unchanged as they were before - with old filename and not ordered by date of change untill I refresh the panel. I need to reopen my directory in filezilla or refresh to see the changed files.

Is it possible to sort the files automatically when they are changed? For example Total Commander works with automatic refresh - when I change any file, the file is automatically changed on opened list too.

The situation is that I use a laptop at multiple locations with an external monitor and extended desktop (not mirrored). One of the locations the orientation of the external monitor is to the right of the laptop and the other location has the external monitor above the laptop. With the monitor specified to the right, I open Filezilla and drag it to the external monitor. Closing and then opening Filezilla will cause it to open in the extended monitor. If I now close Filezilla and either change the relationship so that the external monitor is above the laptop or move to the other location, and then open Filezilla, the Filezilla window will open in the non-existent right hand extended desktop. In order to rectify, I need to to change the orientation so that the external monitor is specified to the right and then drag Filezilla back to the laptop. Other apps open in the laptop screen after the orientation change.

To reproduce: 1)using an external monitor specified as extended desktop and side by side, open Filezilla in the main window and move to external monitor. 2) Close Filezilla 3) Change orientation of monitors so that the external monitor is above main desktop. 4) open Filezilla 5) Filezilla will open in the previous location and cannot be seen. 6) change orientation of monitors to be side by side and Filezilla will be displayed.

Hi Sir,

This is pratap from india. i am suing this FileZilla since last one year. Now i am facing one problem. I am not able to connect to FTP. the same FTP server is connection from othere system. Could please let me know what are things do i need to check for good FTP connection. I am getting the below message.

Status: Resolving address of ftp.jhancock.com Status: Connecting to 206.33.173.11:21... Status: Connection established, waiting for welcome message... Error: Could not connect to server Status: Waiting to retry...

Please help me in this . i am searching for this since last two weeks.

Thanks Pratap

Hi,

This is related to (but not a duplicate of) #2745

When working with sites that have several levels and copious subfolders, I simply do not want the remote view to expand every directory. It's really annoying and the only way to collapse them all is to restart Filezilla.

Suggestions:

• Have an option "do not automatically expand remote view"

or failing that:

• Have a simple "collapse/expand all" button on the remote view

Many thanks.

I work on servers with multiple developers and we don't have a good solution in place for that. A great feature would be when you click the edit button it compares the date of your local file to the date of the remote file and if the remote file is newer than the local file it brings up a prompt and asks you if you want to download the remote file before editing. This should have an ability to turn this on or off in settings.

Thanks for the great product!

It would be massively useful to have a row of navigation buttons above side of the listings.

These would include, but perhaps not be limited to: Up, Back, Up-To-Root-Of-Listing (i.e. the FZ entry point for this session, not the root of the folder/directory structure), Refresh.

Often I have listings on each side that are hundreds of files long. I have gone most of the way down one or both sides. To get back to the top or to the containing folder/directory, I have to slide up or page up or something on each side. When using many times a day, it adds up to a lot of unnecesssary mousing around.

Feature request please:

motd per user / group

I have a PC running Windows and an Intel iMac running Leopard (10.5.8) which is bound to Active Directory for user authentication. SSH was enabled via the "Sharing" Preference Pane (aka Remote Login). When I use FileZilla to SFTP into the Mac, it incorrectly parses the folder and file names. Specifically, the "Group" name seems to be throwing it off. I've attached an example of what I see in the File and Folder panes in FileZilla. If I attempt to double-click on, say, the Desktop folder to open it I get:

Error: "Directory /Users/hunters/advanced administrators     1054 Mar  1 14:01 Desktop: no such file or directory".

I can provide more information if it helps. Have also verified that the Mac version of Filezilla client also has this bug.

Showing TOTAL progress on the windows 7 taskbar would be very handy..

If the server does not return exactly 32KB of data the following error is generated: error while reading: received a short buffer from FXP_READ, but not at EOF - The specific issue is around line 1331 of sftp.c. There is a rather broad comment on 1289 in which the developer was unsure how to handle a short read. - The RFC is a bit fuzzy in describing this case (section 8.2.1): " However, the server MAY respond with less data if EOF is reached, an error is encountered, or the servers internal buffers can not handle such a large request. " I believe the key point is "MAY respond with less if the servers internal buffer cannot handle such a large request" is sufficient broad that the client should not assume that fewer than 'length' bytes is indeed EOF or an error. - I'm unsure about windows API; but for variants of UNIX (including linux) this closely follows the read API in which the implementation is free to return fewer than N bytes (hence the return values indicate the number of bytes read). While typically synchronous reads will indeed return N bytes they are not required to do so. - Anyways we ran into this issue when the server did in fact return fewer bytes and the client (filezilla) abruptly exited. - Following the above convention we believe the loop should be written as:

while(toread > 0 ) {

n = read(buf,MIN(bufsize,toread); if( n indicate error ) error; toread -= n;

} rather than while(toread > 0 ) {

n = read(buf,MIN(bufsize,toread); if( n != MIN(bufsize,toread) ) error;

} - Here is the code from the standard linux sftp.c client: - code to actually read the data: while (total_read < buffer_maxlen) { bytes_requested = buffer_maxlen - total_read; *(s++) = SSH_FXP_READ;

request_id = sftp->request_id++;

. . retcode = _libssh2_channel_write(channel, 0, (char *) packet,

packet_len)

retcode =

sftp_packet_requirev(sftp, 2,read_responses,

request_id, &data, &data_len);

. .

case SSH_FXP_DATA:

bytes_read = _libssh2_ntohu32(data + 5);

if (bytes_read > (data_len - 9)) {

sftp->read_packet = NULL; sftp->read_state = libssh2_NB_state_idle; return -1;

}

#ifdef LIBSSH2_DEBUG_SFTP

_libssh2_debug(session, LIBSSH2_TRACE_SFTP, "%lu bytes returned",

(unsigned long) bytes_read);

#endif

memcpy(buffer + total_read, data + 9, bytes_read); handle->u.file.offset += bytes_read; total_read += bytes_read; LIBSSH2_FREE(session, data); /*

• Set the state back to allocated, so a new one will be
• created to either request more data or get EOF */

sftp->read_state = libssh2_NB_state_allocated;

The number of simultanious connections to any given server should be settable individually per destination server. Indeed, it may well be that one server can sustain many simultaneous connections while another may support only a few. Therefore, it would be better if there were an option in the server profile to set this number.

When the queue of transfers contains transfers that are destined to or from more than one server, it would be more optimal to process the transfers in such an order that the different servers would be used in a round-robin fashion. Parallelism can thus be increased without increasing the number of simultaneous connections to any given server.

Hi!

I would like to recommend a feature to upload files using a temporary filename and thn rename the files after the queue is completed.

Okay, this sounds a bit strange at first glance. So let me explain why this feature would be very worthy: I have a PHP web application that is used nearly 24h a day. Whenever fixing a bug or uploading a new subversion, PHP uses the incomplete files and - consequently - the script crashes.

If a file would be uploaded to a temporary name, first, and then replace the original file in a second step, there would be no incomplete files in the program structure. If this was possible for whole queues, even the time when there are files from different program version, could be reduced by about 95%.

I admit that for citical systems, one would upload the whole application into a temporary folder and then rename the folder manually. However, for most not-so-critical applications, the upload-to-temp would be very helpful. For citical systems the manual step (provoking handling errors) would become superfluous.

Thank you BurninLeo

Actually filezilla seems to accept only the private keyfile stored in the default settings from putty. The log shows that it checks only this one and not all keys added to pageant - so I always have to change putty's default settings if I want to access a server with a different keyfile. It will be more convenient to allow the preselection of the keyfile in the servermanager for each account separately. Maybe this could be achieved in a similar way like pscp which accepts a commandline like this one which I use from a perl script to update a file directly from an SciTE or Geany: pscp.exe -i keyfile -l user "localpath" host:remotepath. If the keyfile is loaded in pageant it will be used without an additional passphrase request.

If a theme does not include a 48x48 pixel icon set, then the speed limit icon will be distorted when opening the Speed Limits dialogue (see screenshot).

A current work around for this is to use the 48x48 icon set from the classic theme if a 48x48 icon is not present for a theme used i.e. minimal or cyril. It would be much better if Filezilla could automatically detect that the theme does not have a 48x48 icon set and fall back to the classic theme speed limit icon.

Alternative ideas:

• the 16x16 icon can be used but will have to be vertically and horizontally aligned to the 48x48 area
• The speed limit icon can be dropped in the speed limits dialogue box
• The above, but the 16x16 icon is placed in the title bar next to "Speed Limits"

This is currently only on Windows (daily build 2011-03-16 used) as linux versions fall back to the classic speed limit icon as expected.

I have a customer that has spaces in their user groups (why, because they can). FileZilla Client does not dislplay any filenames where the user group has spaces in it. If I chomd the files with a user group that does not have a space, the files list in the FileZilla client.

Could you place a box in each local/remote panes to search in displayed files and folders? Like Firefox search box that searches in folder tree (that are displayed) and highlights matched files in tree

Client version 3.3.5.1 When I upload a file the timestamp shown on the server is one (1) hour off. I have had the issue twice, both times after the change to/from DST. Looking at the signon log I see that the system calls mtime with the name of a file on the server as an argument. Actually the first time it was a file the second time it was a folder name. I was able to fixed the problem both times by uploading new versions of the respective files.

The log shows: Status: Resolving address of Stratus Status: Connecting to 192.168.1.237:21... Status: Connection established, waiting for welcome message... Response: 220 stratus FTP server (FTP 1.0 for Stratus STCP) ready. (Compatible with OS TCP/IP) Command: USER dave Response: 331 Password required for dave. Command: PASS Response: 230 User dave.SightLine logged in. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "%s1#m1_d01>SightLine>dave" is current directory. Error: Failed to retrieve directory listing

I am presuming that the problem is the path separator of '>' rather than the more common '/' or '\'

Hi,

I have the following suggestions for the "Action after queue completion" option:

1. It would be great if there was an option to manage custom commands so that I could permanently add them to the list of possible actions. E.G. let's say I always need to run the command C:\RUN.BAT after every queue - If I could give this a name (RUNME) and add the command to the standard available list I wouldn't have to manually type it every time.

2. Less important than the first option - but sometimes I need to run the run.bat command, and then shutdown the pc, or run another runme2.bat command - I know I can build a 3rd bat command which does all - but certain combinations are not possible. The ability to run more than one action would be great too. Some sort of multiple action manager would be needed thou' as sometimes I would need to wait for the first command to finish - so for example I would need to insert a 5 minute delay between issuing the run.bat command and the shutdown command!

Cheers!

A tetraplegic friend use his computer with the chin, and he can only access to the left click. The keyboard is replaced by "clavicom", a software similar to the one given by the windows accessibility tools.

By this way, for example he cannot delete files on his ftp server. This is because the right click is physically not accessible, and the delete key and right click key on the virtual keyboard does not work properly.

The only way to delete a file is to open the windows virtual keyboard and click on delete key.