Custom Query (8170 matches)

Changing local time on the Windows machine while transfering files, time spent and speed are incorrect. For example, when going back in time, time spent and speed displayed are negative.

A timer should be used instead of "gettimeofday()- transfer_start_time" ;o)

I am using a proftpd server with mod_tls on. When downloading from server, the file received will be smaller that the file on the server.

My configuration is FTP over SSL (explicit encryption) and use passive mode. Port is 990.

Downloaded and installed ver 2.2.3 over 2.2.1b on Dec. 31, 2003.

After installing, attempted to connect to a server using SSH2 but was unable to connect.

Error received was: Status: Connecting to xxx.xxx.xxx:22 ... Status: Connected with xxx.xxx.xxx:22, initializing SFTP connection... Command: CONNECT yyy@…:22 Error: FzSFtp.exe was closed, terminating connection. Error: Unable to connect!

I had no previous problems with this.

Re-installed ver 2.2.1b over 2.2.3. Using the same settings, connected successfully.

Made a copy of the 2.2.1b FzSFTP.exe file, re-installed ver 2.2.3, renamed its FzSFTP.exe file to FzSFTP2.2.3.exe, and then renamed the copy of the 2.2.1b FzSFTP file to FzSFTP.exe. Retried the same ftp site and settings and connected with no problems.

I noticed a file size difference:

2.2.3 FzSFTP file 105KB 105 KB (107,520 bytes)

2.2.1b FzSFTP file 106KB 105 KB (108,032 bytes)

Settings for SFTP are: Use Compression - Default Protocol Selection - Use SSH2 selected

Have left the old file in place.

Mark Robinson markr@…

If an executable file is uploaded, the uploaded file will be unexecutable on the server, with an error message "excution error".

Both the client and server systems are Microsoft NT4 SP6a The file servesr is OpenSHH for windows, access protocol is SFTP T he execution error is due to the file's security permissions:

Everyone Special access (RW) owner Special access (RWDPO)

If the permissions are changed e.g to "full control" the file will be executable. so it was uploaded correctly

FileZilla log file attached.

submitted by Ferenc Telbisz E-mail: telbisz@…

hi, I have problme with chinese folders. I can see the files inside of that chinese folders, but when I try to download, it returns errors, so peopel canno download those files. once I change to english folder names, they are fine again.

Version 2.2.3 cannot correctly parse the response to the LIST command if the server is Connect:Enterprise for UNIX.

Each line looks something like this (please excuse the word wrapping): -C--E-----FTP B BCC3I1 7670 1294495 Jan 13 07:42 B0702SYI.00323NXL.PGP

I attach a log file.

In the above example, it thinks that "07:42 B0702SYI.00323NXL.PGP" is the file name, whereas in fact the file name is "B0702SYI.00323NXL.PGP" and "07:42" is the time.

Version 2.1.7 was able to parse the response correctly. That's why I liked FileZilla so much. Many other FTP clients fail to parse this response correctly, which is why I chose FileZilla.

In other words, this "broke" somewhere between versions 2.1.7 and 2.2.3, but I don't see anything in the Change Log that would explain it.

Thanks,

Paul Baker Senior Developer BCC Software, Inc.

If you want to download a big directory (many subdirectories) from a slow server, you often get the error timeout during receive of file list. You can press reconnect button, so you're in same directory as before timeout, but you can't say filezilla to continue receiving file list. You can only begin from start and probably you will get the same error again (because server is so slow).

When transferring multiple files, queue entries with a error status cannot be moved (e.g., move to top) after resetting their status.

For some reason "Process Queue" is not greyed out, so that is selected. Still no luck.

Work around: select entries, "pause" then "resume" them. Now they can be moved.

Version info:

Filezilla Version: 2.2.3. Microsoft Windows XP Professional Version 5.1.2600 Service Pack 1 Build 2600

When uploading multi-level folder structures containing files receive critical transfer error. Top level folder is always created if needed, but not necessarily, if rarely, secondary folders.

It seems possible to change the "Use multiple connections" tab from the Queue menu _or_ the "Edit/Settings" menu.

When transferring one file from a queue with "Queue/Use Multiple Connections" disabled, go to to edit settings and "Use Multiple Connections" is still enabled.

Clicking "OK" causes "Queue/Use Multiple Connections" selection to go active and start up a second connection.

I was uploading a file about 700 M and i got disconnected and since i resumed the upload the whole window has problems with refreshing. The progress bar is shaking, the numbers next to it don't refresh until i close the window and open it again and some perts of the window never even get filled (different part every time i open it) so i can see the background or parts of other windows inside the filezilla window. ana_kosic@…

FTP consists of 2 connections: persistent control connection and temporary data connection.

Control connection by RFC is to be done with Telnet rules. One of them is special meaning of high ASCII characters, for example 255, 254...

Those characters may be used in, for example, windows-1251 codepage as regular letters.

Alas very little share of clients remember of that. Say Windows Commander, Internet Explorer, FileZilla too.

Some dumb servers, for example WarFTP 1.xx just ignores Telnet rules, so there is no problems.

But if server accepts Telnet RFC - then client corrupts filenames on uploading, and if the file/folder on server contains those letters in filename, they are unreachable.

That is the problem

Below are 2 wishes:

First one is that there may be a number of encodings for certain languages. Say Russian has 3 major encodings, Chinese seems to have 2 of them, etc. Usually servers try to re-code filenames, if they are configured to. I wish FileZilla could recode them too on its size.

Second wish is using UTF-8. AFAIK FTP 3.0 protocol will use UTF8 for control connection. I think to communicte with latest servers, FileZilla would be good to has recoding option(as told above) including UTF8 feature on the list.

Thank You.

When using a FTP proxy, if the remote host is on a non standard port, then the delimiter between the remotehost and remoteport is a colon ':'

Our FTP proxy (firewall tool kit) expects to see a space. Not sure if I can alter fwtk or if the admin would even do it.

under CuteFtp you could set the delimiter ( well I remember it having some ability to configure it so it would work )

the line of code that the effect is ( I'm pritty sure is )

FtpControlSocket.cpp version 1.77 line 321

hostname.Format( _T("%s:%d"), hostname, server.port); add port to hostname (only if port is not 21)

I could make a local change, and learn to recompile. But i'd prefer this option to be added to the default build, but I'm not sure how to go about making it an user option. Or if it fits into the big picture.

In ZoneAlarm Firewall, If the user does Internet Lock option then FileZilla will crash when the file transfer is taking place.

I have attached the DMP and RPT file.

I have found this bug to be reproducable 100%.

Regards, Vedavyas K.P

Running in Windows XP, over a SFTP using SSH2 connection. When disk becomes full during a file download, FileZilla consumes 100% CPU.

When I want more then 9 simultanious connections I go to Edit->Settings-> File Transfer Settings and set "Transfer up to 12 files at the same time". 12 is just an example. It should be more then 9 Now if I have queue with more then 9 files Filezilla will not open more then 9 connections :(

In filezilla options you can specify the extensions of ascii files for use when default transfer type is autodetect.

The ability to use a wildcard, eg qmail* (for all .qmail files) would be very useful.

This is an enhancement request. Useful for unix systems where there can be a number of files dot files.

":" is not a valid filename character on windows, but is on unix.

after transferring a file (say ".qmail-file.zilla") to a unix system filezilla produces an error when attempting to rename it to

".qmail-file:zilla"

Enhancement: allow filezilla to use ":" as a filename character on unix systems.

Please disable the default choice "Use multiple connections to transfer files" in FileZilla Client Option, File Transfer Settings.

Reason: As it turns out there are still many FTP server (including FileZilla server) out there still won't support multiple logins correctly for upload / download; most of the time they also have a speed limits so there is no difference iin 1, 2 or 3 login and download.

Disable the default choice "Use multiple connections to transfer files" save the client from retrying or time out in the queue list.

Found in FileZilla client 2.2.3:

If there is a folder that begins with a tilde symbol (~) with other alphabetically-named folders,

• it will appear at or near the top of the treeview, and
• it will appear at or near the bottom of the file list.

I attached a screenshot showing an example in the local pane, though I first noticed it in the remote pane (so it happens in both).

If you scroll down in the queue list, whenever the queue refreshes (e.g.: when the current file is transferred) it scrolls back to the top of the list. This makes it very difficult to select items while processing the queue (for example, to delete part of the queue, specially multiple files)

Uploading of file and directories that contain 'or' characters gives the "no such file or directory" error. This error does not occure during downloading.

I am using "SFTP using SSH2", no proxies.

XML files should be transfered as ASCII by default.

See [ ​http://courses.wccnet.org/computer/mod/na36c. htm ].

a SFTP connection runs fine but after a while no more Bytes transfered and no transfer error detected. Therefor also no autoretry will be done. I waited 24h but nothing changed first File : 1,1MB stops after 2% second file: 54MB stops after 24%

This bug was found in versions 2.2.0 and 2.2.3

It appears FileZilla has a timing/synchronization problem when using SSL

When connecting via SSL passively to my freebsd server I repeatedly get the following...

Status: Connecting to www.realdesk.com ... Status: Connected with www.realdesk.com, negotiating SSL connection... Response: 220 www.beq.ca FTP server (Version 6.00LS+TLS) ready. Command: AUTH SSL Response: 234 AUTH SSL OK. Error: Timeout detected! Error: Unable to connect! Status: Waiting to retry... (5 retries left) Status: Connecting to www.realdesk.com ... Status: Connected with www.realdesk.com, negotiating SSL connection... Response: 220 www.beq.ca FTP server (Version 6.00LS+TLS) ready. Command: AUTH SSL Response: 234 AUTH SSL OK. Error: Timeout detected! Error: Unable to connect!

However when I turn on debugging, I get the SSL popup immediately and the output looks like this:

Status: Connecting to www.realdesk.com ... Status: Connected with www.realdesk.com, negotiating SSL connection... Response: 220 www.beq.ca FTP server (Version 6.00LS+TLS) ready. Command: AUTH SSL Response: 234 AUTH SSL OK. Trace: Using TLSv1, cipher TLSv1/SSLv3: AES256-SHA, 1024 bit RSA Status: SSL connection established. Waiting for welcome message... Command: USER realdesk Trace: FtpControlSocket.cpp(578): OnReceive(0) OpMode=1 OpState=0 caller=0x00b79288 Response: 331 Password required for realdesk. Command: PASS * Trace: FtpControlSocket.cpp(578): OnReceive(0) OpMode=1 OpState=3 caller=0x00b79288 Response: 230 User realdesk logged in. Status: Connected Trace: FtpControlSocket.cpp(2877): ResetOperation(1) OpMode=1 OpState=-2 caller=0x00b79288 Trace: FtpControlSocket.cpp(846): List(FALSE,0,"","",1)

OpMode=0 OpState=-1 caller=0x00b79288

Status: Retrieving directory listing... Command: PWD Trace: FtpControlSocket.cpp(578): OnReceive(0) OpMode=4 OpState=0 caller=0x00b79288 Response: 257 "/home/realdesk" is current directory. Trace: FtpControlSocket.cpp(846): List(FALSE,0,"","",0)

OpMode=4 OpState=0 caller=0x00b79288

Status: Directory listing successful Trace: FtpControlSocket.cpp(2877): ResetOperation(1) OpMode=4 OpState=0 caller=0x00b79288

These behaviours are consistent with whether I have debugging enabled or not.

Server 8.8: The Server Returns "250 Directory created successfully" this is the wrong number. The correct number is "257".

All is in the summary

I'm running FZS on a Win2k box (latest service pack). While users are connected I change the upload Speed limit from Unlimited to 200k. I Applied the changes but a little while later I changed the speed limit to 400k. At that time all connected users stopped sending data, but stayed connected. I could not kick the users, stop the server or even restart the FZS service. To get the service running again you have to reboot the machine. I would really appreciate it if this problem could be resolved soon.

Sometimes a file name or directory name is not displayed in remote dir listing. Trace shows that the dir list was received completely (with the missing file/dir).

Update all views has no effect. Close and restart of filezilla (2.2.3) has not effect. You never get the right list of files.

Is that connected to the general update problem of the views?

Setup: Client: Filezilla 2.2.3, OS: WIN 2000, WIN NT, WIN XP Server: WIN ftp-server: Win CE 3.0 ftpd, WinCE 4.0, WIN NT (TypFTP)

jasinski@…

Windows 2003 Ent. Server

The installation on a single NIC server worked great, tested and ran for several days without problem.

I added a second NIC to the system, with a different subnet.

When connecting by the first working address I get as far as the login, get authenticated, but never resolve the data channel.

The first NIC is sitting behind a Linksys Router on a fixed IP.

The second NIC is sitting behind a Firebox firewall with no external mappings.

OS of client: windows XP OS of server: HP-UX 11 Filezilla version: 2.2.3 I tried to transfer a file with a txt extension from windows PC to HP-UX server, using transfer type Auto- detect and transfer type ASCII. In both occasions, the file was transferred in binary mode leaving DOS line terminators in the file on the server.

For some reason on my pc when I connect to a server it shows zero items on the server. It was working fine now it does not, im guessing its some registry error of some kind or dll maybe. I am not sure. I can connect but where the list of items comes up its blank. I have another PC and it works fine. It WAS working fine before but suddenly I ran into this problem.

Whenever I try to change the Local Site to a Network Drive Filezilla locks solid.

Anybody else found this?

TIA,

Steve

Running v 2.2.3 on win95

"Error starting program: A required .DLL file, WS2_32.DLL, was not found."

Running the system dll updater appears to have no effect.

uwak@…

I am using a Linux ftpd "glftpd 1.32_Linux+TLS" which is on a public IP (IPtables is up and running though)and it works 100%. Filezilla used to work 100% for me and I had no problem whatsoever ... but then I decided it was time for SSL... and the made things bad.

Everything works like a charm today except for the filetransfers. All filetransfers hang at 100% and therefore next file wont be downloaded.

Now, other ftp-clients works just fine (FlashFXP f.x.) but FileZilla doesnt seem to like SSL very much.

Is there anyone out there that has a path or a clue how to solve my problems?

Since upgrading from 2.2.3 to 2.2.4, I noticed that the previous sites in the site manager didn't move me into the "Default Remote Directory".

I'm referring to the option set in the Advanced button on the Site Manager. After changing it back to the directory I define, click "OK", click "Save and Exit", and go right back in, I find that it has been reset to a "/".

As far as I can tell, this bug has been introduced in 2.2.4.

Thanks for a great product! Dean dean@…

after an upgrade from 2.2.3 to 2.2.4 the 'Default remote directory' setting of existing sites is not being used

default remote directory should be /home/thegoldenear/htdocs/

respective information from from the log concerning the directory: Response: Remote working directory is /home/thegoldenear Status: Connected Trace: SftpControlSocket.cpp(2404): ResetOperation(1)

caller=0x00d0a1c0

Trace: SftpControlSocket.cpp(289): List(FALSE,0,"/","",1) caller=0x00d0a1c0 Status: Retrieving directory listing... Command: CD / Trace: SftpControlSocket.cpp(2568): OnReceive(0) caller=0x00d0a1c0 Trace: SftpControlSocket.cpp(2568): OnReceive(0) caller=0x00d0a1c0 Trace: SftpControlSocket.cpp(2568): OnReceive(0) caller=0x00d0a1c0 Response: Remote working directory is now / Trace: SftpControlSocket.cpp(289): List(FALSE,0,"","",0) caller=0x00d0a1c0 Command: LIST

I get an error each and every time I try to run the latest version of FileZilla in the Files area.

I'm currently running Windows Server 2003 Enterprise.

I used the Windows Debugging Tools to get the following:

---

Microsoft (R) Windows Debugger Version 6.2.0013.1 Copyright (c) Microsoft Corporation. All rights reserved.

CommandLine: C:\Program Files\FileZilla\filezilla.exe Symbol search path is: * Invalid *

• Symbol loading may be unreliable without a symbol

search path. *

• Use .symfix to have the debugger choose a symbol

path. *

• After setting your symbol path, use .reload to

refresh symbol locations. * Executable search path is: ModLoad: 00400000 00541000 image00400000 ModLoad: 77f40000 77ffa000 ntdll.dll LDR: PID: 0xf54 started - '"C:\Program Files\FileZilla\filezilla.exe" ' * ERROR: Symbol file could not be found. Defaulted to export symbols for ntdll.dll - (f54.728): Access violation - code c0000005 (first chance) First chance exceptions are reported before any exception handling. This exception may be expected and handled. eax=00000000 ebx=00000000 ecx=0012fc00 edx=77fc2060 esi=00000000 edi=77fc2100 eip=77f5707f esp=0012fa84 ebp=0012fb44 iopl=0 nv up ei pl nz na po nc cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000

efl=00010206

ntdllRtlSetBits+0xe28: 77f5707f 8b400c mov eax,[eax+0xc] ds:0023:0000000c=???????? 0:000> g (f54.728): Access violation - code c0000005 (first chance) First chance exceptions are reported before any exception handling. This exception may be expected and handled. eax=0012fc6c ebx=00000000 ecx=0012fc98 edx=7ffe0304 esi=7ffdf000 edi=c0000005 eip=77fa3ee1 esp=0012fc6c ebp=0012fcbc iopl=0 nv up ei pl zr na po nc cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000

efl=00000246

ntdllRtlRaiseStatus+0x24: 77fa3ee1 c9 leave

---

I hope that can be of *some* help to someone.

I'll post more information at a later date when I get a chance.

Regards,

Stuart Gilbert.

When you create a new directory all the information like date and time is ????. Then you cant do anything like chmod it

When "Remember window size and position of Filezilla" is checked in the Interface settings and the queue pane is set to display when the program opens, you will notice that the queue pane continuously creaps up until it becomes the biggest pane on the screen. To test, just make sure local fileview and/or remote file view is also displayed and just close and reopen the program several times and you will notice that the queue pane progresses upward.

As of 2.2.4, the FileZilla client is not connecting to the specified default remote directory of any site entered in the Site Manager. It was working fine with the last version.

I have two completely different sites, and neither will connect to the specified default remote directory.

Note that it will still successfully look up the specified default local directory.

I attached a log that shows what happens, or rather what doesn't: It should connect to the default directory (/www/) that I specified in the site's entry in Site Manager.

Thanks.

Large directories (50,000+files) will hang the UI.

I cannot connect to my FileZilla server via emacs' ange- ftp module. I can connect to other FTP servers via emacs and I can connect to my FileZilla server via other FTP clients. The only two commands particular to the FTP connection via emacs are that it uses XPWD instead of PWD, it issues a PORT command which is then received as "successful" and it issues "NLST -al /." to get its file list. The error in emacs is that all directories are empty and no files exist. If I enter "NLST -al" into a command line FTP client, I get a flat list of files for my FileZilla server but the servers that emacs can connect to send a list similar to the LIST command on FileZilla Server. In other words, the successful ange-ftp emacs connection sends a directory list complete with the drwxr-xr-x permissions list, links, owner, group, size, date and username in response to "NLST -la". FileZilla does not. I will continue to investigate how to modify the command ange-ftp sends, but it seems to me this is a compatibility issue that needs to be resolved.

Thanks.

SSL/TLS connection is not working over SOCKS5 Tested FileZilla versions: 2.2.3 and 2.2.4b

Connection is estabilished successfully, but retrieval of directory listing fails.

I try to connect to an SSL/TLS-supported ftp-server with explicit encryption, going through a SOCKS5 proxy. It doesn't work with using a proxy and works without the proxy (that means direct connection between FileZilla and the ftp-server).

Attached three session logs:

• sample log for a connection using SOCKS5 proxy (and

FileZilla 2.2.4b)

• sample log for direct connection between FileZilla

and ftp-server

• sample log for a session using CuteFTP Pro v3.3 as

client and SOCKS5 proxy (just for demonstration purposes ... it shows that a connection _is_possible_ between the client machine and the ftp-server using the SOCKS5 proxy and explicit SSL/TLS encryption)

Can't download one or more files over a sftp connection. See error log: Status: Starte Download von /home/phys/s104/ebmi0013/.nt/E/Thernmodynamik/Ideales Gas/Gasthermometer.pdf Befehl: GET Gasthermometer.pdf C:\Dokumente und Einstellungen\Michael\Eigene Dateien\Ideales Gas\Gasthermometer.pdf FALSE Antwort: /home/phys/s104/ebmi0013/.nt/E/Thernmodynamik/Ideales GasGasthermometer.pdf: no such file or directory Fehler: Download fehlgeschlagen I Think in Antwort it should be: /home/phys/s104/ebmi0013/.nt/E/Thernmodynamik/Ideales Gas/Gasthermometer.pdf Is there just missing a "/" somewhere in the code?

example...

ftp> ls -als 200 PORT command successful. 150 ASCII data connection for /bin/ls (203.251.170.41,4076) (0 bytes).

412728

2 drwxr-xr-x 4 khist other 512 2Ô 10|

11:58 .

2 drwxr-xr-x 4 root other 512 1Ô 30|

17:53 ..

2 drwxrwxrwx 4 khist other 512 2Ô 6|

18:36 dbsnc

2 drwxrwxrwx 4 root other 512 1Ô 30|

17:59 mi_index 412720 -rw-r--r-- 1 root other 211190222 2Ô 10 | 11:55 mi_index.tar. gz 226 ASCII Transfer complete. ftp: 371 bytes received in 0.02Seconds 23.19Kbytes/sec. ftp>

Total -> month -> Ô day -> |

Installed 2.2.4c on two Win 98 boxes, and it fails to work on either. Double click the icon, disk whirs, then nothing... 2.2.4b works fine

Filezilla 2.2.4c and 2.2.4d doesn't start under Win NT 4.0 Sp 6a. Earlier versions started correctly. Changing preferences (and removing them from registry) can't help.

Filezilla 2.2.4e doesn't start under Win NT 4 Sp 6a, like 2.2.4c and 2.2.4d. Probably it is not only Thread32 problem.

If I establish a connection to a SSL-Server which has a certificate that is not stored yet, the message box "Accept certificate"? appears. In this box the fields "Valid From" and "Valid Until" are only showing the string "<date/time>" but not the correct dates.

login fails with error:

Response: Fatal: Out of memory! Error: Unable to connect

I found echo commands in the user in question's .cshrc file. I assume this would break similarly with any shell. If possible a better error message would help diagnose this issue faster.

When I download files with multiple connections (4 threads), the content of file X is being saved under filename Y en visa versa. I'm not certain of the exact conditions when this take place, but I guess it has something to do when two threads finish simultaniously.

I was informed that our ftp server has now added support for TLS. i tried to connect via TLS and recieved an error message. the server admin told me he never saw that port-command before, so it could be bug of some kind.

the command sent is:

PORT 192,168,2,162,4,108

the response is:

500 Illegal PORT command

followed by the error:

Could not retrieve directory listing

please note this only happens while TLS is used to connect.

tiger.uppercut@…

Status: Connecting to (my ftp-server) ... Status: Connected with (my ftp-server), negotiating SSL connection... Response: 220 ProFTPD 1.2.9 Server (Debian) [my ftp-server] Command: AUTH TLS Response: 234 AUTH TLS successful Status: SSL connection established. Waiting for welcome message... Command: PBSZ 0 Response: 200 PBSZ 0 successful Command: PROT P Response: 200 Protection set to Private Command: USER (my username) Response: 331 Password required for (my username). Command: PASS (*) Response: 230 User (my username) logged in. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current directory. Command: PORT 192,168,2,162,4,108 Response: 500 Illegal PORT command Error: Could not retrieve directory listing

I can make filezilla crash immediately every time I switch the local file view to a mapped network drive to a file share that is offline. I usually have the M drive mapped to
PSI-XP\c$ and when I'm at work, that share is unavailable. Through windows XP I'm able to make that share available using windows offline files. Trouble is that whenever I point the local file view to the M drive, FileZilla immedately crashes with the following popup:

Runtime Error! Program: C:\Program Files\FileZilla\FileZilla.exe

This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.

I was downloading the unofficial Debian-DVD-testing-Release from ​ftp://ftp.fsn.hu/pub/CDROM-Images/debian-unofficial/sarge-dvd With the Iso 1 the Download aborts after ~ 4 GByte (4.294.966.784 Byte) and could not be resumed.

The Status-Messages:

Status: Connecting to ftp.fsn.hu ... Status: Connected with ftp.fsn.hu. Waiting > for

welcome message...

Response: 220 frontend2.fsn.hu FTP server ready. Command: USER anonymous Response: 331 Guest login ok, send your email address

as password.

Command: PASS * Response: 230- FTP.FSN.HU Response: 230- For more informations

about this project, see its webpage:

Response: 230-

​http://www.fsn.hu/

Response: 230- Response: 230- This machine is a PIII/450 with 1280

MB of RAM & 1262 GB of disk space.

Response: 230- Gigabit co-location services provided

by Axelero (​http://www.axelero.com/).

Response: 230- Please report abuse at abuse@…,

NOT at Axelero.

Response: 230- Response: 230- This system may be used 24 hours a

day, 7 days a week.

Response: 230- See README.access for more information

on accessing this archive.

Response: 230- If you have any comments or problems

about this archive, please send them

Response: 230- via email to bra@…. Response: 230- Response: 230 Guest login ok, access restrictions apply. Status: Connected Status: Starting download of

/pub/CDROM-Images/debian-unofficial/sarge-dvd/sarge-i386-1.iso

Command: CWD

/pub/CDROM-Images/debian-unofficial/sarge-dvd/ Response: 250 CWD command successful.

Command: PWD Response: 257

"/pub/CDROM-Images/debian-unofficial/sarge-dvd" is current directory.

Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode

(195,228,252,133,208,155)

Command: REST 4294966784 Response: 350 Restarting at 4294966784. Send STORE or

RETRIEVE to initiate transfer.

Command: RETR sarge-i386-1.iso Response: 150 Opening BINARY mode data connection for

'sarge-i386-1.iso' (4660789248 bytes).

Error: Error: Download failed Status: Starting download of

/pub/CDROM-Images/debian-unofficial/sarge-dvd/sarge-i386-1.iso

Command: TYPE I Error: Disconnected from server Error: Download failed

The local harddisk is not filled up. Also I can restart the download by zero, so the problem shouldn't be the remote Server.

Hello, When I transfer any file, the message board displays only the last line on top and keeps the others useful informations out of the window, when I want to know what's happen with the connection (when it doesn't work I'd like to know why ..) I have to roll the message board and if any command is done while I'm watching it returns in its last state: the last line on top With an older all was OK and a day it happens, and nerver stop .. I have installed two newer versions and nothing changed I am on Windows 98 with a 1024/128 connection if it could help you. Thanks.

When attempting to delete a symbolic link on a linux server, filezilla 2.2.4f deletes the directory the symbolic link links to and does not delete the symbolic link.

After the linked directory is deleted, the symbolic link remains and when you attempt to delete it again, it continues to look for the linked directory which was already deleted.

Desired action: When deleting a symbolic link, it should just delete the symbolic link and not the directory it links to. Also filezilla does not delete symbolic links at all.

In Options -> Directory Cache, if one or more of the "hours, minutes, seconds" entries has *no value* (i.e. nothing is entered there, and isn't zero), hitting OK brings up a blank prompt with nothing but an ok button.

There's no indication of what is wrong, and had I not remembered exactly what I had changed I might not have figured it out.

It might also be good to assume non-entered values here are zero.

Found the bug using FZ 2.2.4b, but confirmed in 2.2.4f on both win2k and winxp.

When you try to edit files with characters which are illegal in windows, such as a : FileZilla crashed. Downloading these files works fine, special characters are converted to _. This bug is slightly related to bug # 888404, since filezilla must be able to download a file to a temp dir, then upload it and rename the file with special chars.

If you enter a folder after connecting to a server, that begins with two slashes (), they are replaced by a single slash (/). Example: fh-kroesus/data1/kurs is converted to: /fh-kroesus/data1/kurs

Response: 550 Invalid Path Error: Could not retrieve directory listing

Cannot set the folder permissions of a remotely created directory until FileZilla is refreshed (F5) in v. 2.2.5.

Also date is set to '???', until refreshed. Error Message on click of ‘File Attributes…’ menu item: 'The Parameter is incorrect.'

Hi, when connecting to a sftp server (over ssh2), if you submit an invalid password, the status message is really not helpful.

Here's what it looks like :

Status: Connecting to 10.61.3.122:22 ... Status: Connected with 10.61.3.122:22, initializing SFTP connection... Command: CONNECT der01ale@10.61.3.122:22 Error: FzSFtp.exe was closed, terminating connection. Error: Unable to connect! Status: Waiting to retry... (5 retries left)

There is no clear evidence that this was a password problem. Here's what it looks like with debug on (with the same wrong password) : +++++++++++++++++++++++++++ Status: Connecting to 10.61.3.121:22 ... Trace: FzSFtp.exe: FzSFtp started and initialized. Trace: SftpControlSocket.cpp(2288): OnConnect(0) caller=0x003af000 Status: Connected with 10.61.3.121:22, initializing SFTP connection... Command: CONNECT der01ale@10.61.3.121:22 Trace: FzSFtp.exe: Ssh.c(1949): Server version: SSH- 2.0-Sun_SSH_1.0 Trace: FzSFtp.exe: Ssh.c(1985): We claim version: SSH-2.0-PuTTY-FZ-Local: Mar 21 2004 15:40:05 Trace: FzSFtp.exe: Ssh.c(1987): Using SSH protocol version 2 Trace: SftpControlSocket.cpp(2570): OnReceive(0) caller=0x003af000 Trace: FzSFtp.exe: Ssh.c(4244): Doing Diffie-Hellman key exchange Trace: SftpControlSocket.cpp(2570): OnReceive(0) caller=0x003af000 Trace: FzSFtp.exe: Ssh.c(4301): Host key fingerprint is: Trace: FzSFtp.exe: Ssh.c(4302): ssh-rsa 1024 73:f3:02:7f:28:07:ef:90:b2:d1:d0:f0:f3:f5:53:e2 Trace: SftpControlSocket.cpp(2570): OnReceive(0) caller=0x003af000 Trace: FzSFtp.exe: Ssh.c(675): Initialised AES-128 client->server encryption Trace: FzSFtp.exe: Ssh.c(675): Initialised AES-128 server->client encryption Trace: SftpControlSocket.cpp(2570): OnReceive(0) caller=0x003af000 Trace: SftpControlSocket.cpp(2570): OnReceive(0) caller=0x003af000 Trace: FzSFtp.exe: Ssh.c(5284): Sent password Trace: SftpControlSocket.cpp(2570): OnReceive(0) caller=0x003af000 Trace: FzSFtp.exe: Ssh.c(4751): Access denied Trace: FzSFtp.exe: Ssh.c(5124): Unable to authenticate Trace: SftpControlSocket.cpp(2356): OnClientError (1) caller=0x003af000 Error: FzSFtp.exe was closed, terminating connection. Trace: SftpControlSocket.cpp(2376): DoClose(0) caller=0x003af000 Trace: SftpControlSocket.cpp(2406): ResetOperation (4100) caller=0x003af000 Error: Unable to connect! Status: Waiting to retry... (5 retries left) ++++++++++++++++++++++++++++++++++

I also tested this with a plain FTP server, and the message is really clear, so this seems to affect only sftp over ssh2 connections.

_adery_ at _hotmail_ dot _com_

FileZilla doesn't display any error messages when a user tries to uplaod or add to queue when not connected to a server.

While trying to use GSSAPI authentication, I'm getting the following error:

Trace: GSSAPI authentication succeeded Command: PBSZ 4096 Trace: Encrypted command: ENC YDsGCSqGSIb3EgECAgIBAAAAAPwyMZsNK8HgjRWIvZzVteBaHWO4difNb4Tp1f8BR8eyZPF3lR9l0aCg== Trace: Encrypted reply: 632 YDsGCSqGSIb3EgECAgIBAAAAAP0L5v0lDTPAfV3tawWxEdrPYRum6cAkxXAgokmdZ2wGhRWSOOvmUf7w== Response: 200 OK Trace: GSSAPI PBSZ failed Trace: FtpControlSocket.cpp(807): DoClose(10240) OpMode=1 OpState=-5 caller=0x003abf40 Trace: FtpControlSocket.cpp(2919): ResetOperation(14340) OpMode=1 OpState=-5 caller=0x003abf40 Error: Unable to connect! Trace: ControlSocket.cpp(184): m_pGssLayer changed state from 16253000 to 4 caller=0x003abf40 Error: Interrupted by user!

The server appears to be returning '200 OK' in response to the 'PBSZ 4096' command, but the FileZilla client doesn't appear to be accepting that repsonse.

Windows XP, MIT Kerberos for Windows 2.6b3 installed, valid K5 TGT, FileZilla causes a host/hostname@REALM ticket to be fetched, as expected.

I searched through the sources, but couldn't find any indication of where the 'PBSZ 4096' command was being sent, or where the 'GSSAPI PBSZ failed' message is being returned.

Any help would be appreciated.

FileZilla_2_2_5_setup can not be installad in Windows NT with service pack 6a. Just when the installation is started after answering the questions, it aborts with an "Application error occurred" message.

Hi, the error message "Error: The language DLL for the language 'Deutsch' could not be found" occurs on the first start of FileZilla-2.2.5 after installation (where I selected "German" as language) on Windows 98. The installation directory is F:\DFUE\FTP\FileZilla\2\2\5, a after installation write-protected samba-share (samba 2.2.8a). FileZilla itself shows "English" as list item in "Edit|Settings|Language" only. The DLLs in F:\DFUE\FTP\FileZilla\2\2\5\ are: ---8<--- linserv:/usr/local/smbd/Apps/DFUE/FTP/FileZilla/2/2/5 # ls -l *.[dD][lL][lL] -r--r--r-- 1 admin admins 106496 Mar 21 16:43 FzResBu.dll -r--r--r-- 1 admin admins 77824 Mar 21 16:43 FzResCh.dll -r--r--r-- 1 admin admins 77824 Mar 21 16:43 FzResChs.dll -r--r--r-- 1 admin admins 114688 Mar 21 16:43 FzResDe.dll -r--r--r-- 1 admin admins 106496 Mar 21 16:43 FzResEs.dll -r--r--r-- 1 admin admins 114688 Mar 21 16:43 FzResFr.dll -r--r--r-- 1 admin admins 94208 Mar 21 16:43 FzResHu.dll -r--r--r-- 1 admin admins 110592 Mar 21 16:43 FzResIt.dll -r--r--r-- 1 admin admins 86016 Mar 21 16:43 FzResJp.dll -r--r--r-- 1 admin admins 86016 Mar 21 16:43 FzResKr.dll -r--r--r-- 1 admin admins 86016 Mar 22 01:38 FzResNor.dll -r--r--r-- 1 admin admins 106496 Mar 21 16:43 FzResPo.dll -r--r--r-- 1 admin admins 102400 Mar 21 16:43 FzResRu.dll -r--r--r-- 1 admin admins 323584 Oct 23 11:11 dbghelp.dll -r--r--r-- 1 admin admins 27648 Oct 5 11:26 fzgss.dll -r--r--r-- 1 admin admins 373760 Dec 8 00:35 libeay32.dll -r--r--r-- 1 admin admins 67584 Dec 8 00:35 ssleay32.dll ---8<---

Some installation tests on local drives shows, that this error occurs only, if the installation directory is a samba network share, not depending on access rights.

Any hints to solve that?

Some other remarks: 1) The deinstallation program should fail, if the program-to-be-deinstalled is running while deinstallation (more general: if any of the files is in use by the OS) 2) The deinstallation does not delete the file "FzSFtp.exe"

Regards, Matthias

Go to Site Manager -> [Advanced] If you enter a relative path for the Default remote directory eg reports/

then click [OK]. When you go back to look at it, it changes to an absolute path by adding a '/' in front eg /reports/

We have recently started trialling Filezilla in a Corporate (multi-user) environment, and this functionality is fairly important.

Everything else has been spot on so far - congratulations on a great project =)

Regards, Bernard Gray bernard_gray@…

Status: Connecting to apollo ... Status: Connected with apollo, negotiating SSL connection... Response: 220---------- Welcome to Pure-FTPd [TLS]

Response: 220-You are user number 2 of 10 allowed. Response: 220-Local time is now 15:29. Server port: 21. Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: AUTH TLS Response: 234 AUTH TLS OK. Status: SSL connection established. Waiting for welcome message... Command: PBSZ 0 Response: 200 PBSZ=0 Command: PROT P Response: 534 Fallback to [C] Command: USER horia Response: 331 User horia OK. Password required Command: PASS Response: 230-User horia has group access to: cvs

video audio dialout

Response: 230- uucp users Response: 230-This server supports FXP transfers Response: 230 OK. Current restricted directory is / Status: Connected Status: Retrieving directory listing... Command: CWD /store/ Response: 250 OK. Current directory is /store Command: PWD Response: 257 "/store" is your current location Command: PASV Response: 227 Entering Passive Mode (192,168,254,132,167,79) Command: TYPE A Response: 200 TYPE is now ASCII Command: LIST Response: 150 Accepted data connection Error: Could not retrieve directory listing Response: 226-Options: -a -l Response: 226 4 matches total Command: TYPE A Response: 200 TYPE is now ASCII

When I try to view/edit a remote file (attached as restart.ac) that is dated 1970-01-01 Filezilla crashes. The same happens when trying to move the file from remote site to local PC. The file has no info in the time column.

I'm unable to start Filezilla on XP Pro. Latest version of FZ (2.2.5f) All updates on XP. When I start Filezilla it shows up in the task list but never displays any thing. If I start FZ again, it adds another entry to the task list with the same result as before (nothing). I've searched the forums and found one other person with the same problem. I didn't find any other bug report on this problem. I don't know what else to try. I'd be glad to work with someone on this problem.

Hallo, can the FileZilla drag and drop to the upload Files of the Networkfolders ?

have you Informatioen.

thank you

Current cvs source doesn't compile:

source\FileZilla.cpp(146) : error C2675: unary '+' : 'class CString' does not define this operator or a conversion to a type acceptable to the predefined operator

relevant line is

config = +token;

My guess is that that is a typo for

config += token;

When opening a file with case sensitive name, the file name is passed in lowercase to the editor (phpedit), so it is saved in lowercase when modifications are saved. When the file is directly opened from the explorer and save it, the file is saved with a case sensitive name.

OS: windows 2000 service pack 4

Connected successfully to a VMS system running VMS 7.2 and UCX 5.3 I see no directory listing. The "Dump Directory Cache" file looks like this:

FileZilla Directory Cache Dump

Dumping 1 cached directories

Entry 1: Path: DISK$CAM:[NINGERSOLL] Server: ningersoll@…:21, type: 256 Directory contains 0 items:

This is my root directory and there are a lot of files and directories. An "ls" from Windows FTP shows lots of files. Occassionally I see garbled VMS directory info. The debug file I have attached shows another version of the "Directory Cache".

Error message ('Incorrect parameter') when trying to edit an bandwidth restriction (for server and group, not tested for user).

the restriction was: From 8am To 8pm On Monday, Thuesday, Wednesday, Thursday and Friday

The only solution to edit the restriction is: remove it and add an new one.

FServeur Version: 0.8.9 OS: XP Pro SP1 Lang: French

Versions tested with problem: 2.2.5.100, 2.2.4.600

Environment: W2kSP4 running under VMWare Workstation 4

When browsing local filesystem, if you select a drive mapped to a VMWare share, a box pops up saying "The parameter is incorrect". For the rest of your session, the local file list box is grey and empty (but the treeview control continues to function). Upon exiting Filezilla, you will no longer be able to run it; when you attempt to execute it, there will be brief drive/processor activity, but no process appears in the task manager.

Examination of Filezilla.XML shows the following value:

<FileZilla>

<Settings>

<Item name="Default Folder" type="string">M:\</Item>

...where M: is the offending drive. Changing M: to C: allows Filezilla to work again.

Background on VMWare shares: VMWare allows the host to share folders, in much the same way as Windows Networking. In the guest OS, they appear as network shares & behave pretty much the same way. In the virtual machine, The Windows network view shows the following:

Entire Network

Microsoft Windows Network

workgroup_name

machine_name

share_name

VMWare Shared Folders

.host

.host\share_name

VMWare shares can be mapped to a drive letter and used the same as any other network share.

I don't know if this same problem occurs in other types of filesystems outside of the VMWare environment or not, but suspect it might...

Hello,

Thought I ought to let you know Installing 5 or 5a Reach the choose a directory section of install process The directory chooser widget is not displayed instead I get a Dr Watson error !

Regards

LG UK Developer

Display of VMS server information has garbled FileType information. The filetype, for example .TXT, is displayed along with the file version. Probably would be better to display the fill filename including the version and a "proper" filetype. However, I personally would be just as happy to have the version information completely ignored and have only one of a file, the highest version, be displayed.

After connecting to a custom FTP server on Linux, I'm able to see the directory listing, but when I try to open a directory, I hear a beep and do not descend into the directory. With debug turned on, I don't see any debugging when I try to open a directory.

I have also tried the FTP client in Internet Explorer, the command line FTP client in Linux and Windows/DOS, and WS_FTP. All of these clients are able to descend into the directory when connected to the FTP server.

This FTP server is running on port 2741. I'm running Filezilla 2.2.5a on Windows XP Pro, SP1.

Debugging information from Filezilla attached.

Using a certain file request (like: ./) returns the full path where the file lies.

For example: ​ftp://www.example.com/./

Will make the address bar in IE change to: ​ftp://www.example.com/C:/Documents%20and% 20Settings/Administrator/Desktop/ExampleWebSite/ (just an example).

This can be done with a simple limited read-only access to the server.

If you have questions, my email is erez8@…

Server08_0_9 Install to WINNT4.0 server caused exception: access violation (0xc0000005) error?

Access violation occurr and Dr. Watson log attached.

I am currently listing directories in the home directory of my server (v. 0.8.9) using windows shortcuts. When attepting to connect to my server using Internet Explorer I find that none of my directories in the home directory are listed. They are listed on my friend's FTP server (same version), however, because he just uses one of his hard drives as the home directory and hence doesn't use shortcuts. So I believe this is a problem with the way the server is resolving windows shortcuts. I also find them listed in an odd manner when I log in using the client, as if it notices that they are unresolved shortcuts.

I request that you fix this problem because I doubt Microsoft will fix it even if I asked them to, and I cannot install your client on every computer that I use even though I would like to. I have attached a log file of somebody logging on using Internet Explorer in case it proves useful.

Thanks in advance for your help.

Server does not accept ALLOCATE command (it should be treated as a NOOP command). It makes it unusable with my Embedded Linux. I'm using BusyBox, its ftpput command sends ALLO before file transfer starts to inform the server about the file size.

Jan Cablik cablik@…

Using the tilde (~) for home directory in "Default Remote Directory" or "Remote Site" doesn't work because a slash (/) or the PWD is put in front. The tilde indicates user's home directory, but can't have anything in front. The remote site will replace it by the actual directory.

The bug is that when dragging and dropping files and directories from the right pane (remote server) to the left pane (local), the target directory is correct for any files, but incorrect for any subdirectories. If you drop onto empty space in the left pane everything is fine, as your intended target was the directory being listed. However, if you instead drop on a directory name in the left pane, any files you have selected go into that subdirectory, but, the folders you had selected go to the directory listed, and not the subdirectory that was dropped on.

Confused? Here's an example.

The left pane has a view of "c:\local" . There exists a directory "c:\local\local-images\" . We see: local-images/

The right pane has a view of a remote server. In this view, we see: remote-images/ readme.txt logo.jpg

We know that there's some files in the directory "remote-images".

The user selects everything in the right pane. The user then drags one of the filenames to the left pane, over "local-images", and releases the mouse button. Filezilla does its thing, transferring files into local-images. However, "remote-images" and all the files under it get put into C:\local, and not C:\local\local-images\ like it should. That's the bug, subfolders don't get placed properly when dragged onto target folders.

Possible repeat of bug # 928152 , sorry in advance if that's the case. ​http://sourceforge.net/tracker/index.php? func=detail&aid=928152&group_id=21558&atid=37224 2

Thanks for making such great software. It's quite inspiring to see something so well done in the open-source community. :)

When I'm trying to connect to a server(by TLS), connection is stopped after authorization !!!

Connection LOG: Status: Connecting to blabla... Status: Connected with blabla, negotiating SSL connection... Response: 220---------- Witaj na Pure-FTPd [TLS] ---------- Response: 220-Jeste¶ 1 u|ytkownikiem z 5 mo|liwych Response: 220-Lokalny czas: 20:33. Port serwera: 21. Response: 220-To jest prywatny system - Bez anonimowych logowaD Response: 220-IPv6 connections are also welcome on this server Response: 220 Zostaniesz rozB±czony po 5 minutach nieaktywno¶ci. Command: AUTH TLS Response: 234 AUTH TLS OK. Error: Timeout detected! Error: Unable to connect!

What I have to do ????

Hi,

if a file upload fails because the destination file already exists and is write protected, the file handle is locked. If this is a source file for example that has to be edited again, you are unable to save that file in your editor unless you close filezilla and so release that file. Removing the failed file transfer from the queue does not work, filezilla has to be closed completely. This is annoying because every cvs-driven development relies on the read-only file protection stuff and so I often have the requirement to overwrite read-only files. Wouldn't it make sense just to ask per popup "warning, write protected! Really overwrite?"

If this behaviour is too risky for most of the users, a preference caption like "[ ] automatically ask for overriding read-only files" would do the trick.

Greetings from Lüneburg/Germany, Eckard

I use filezilla to connect to a mainframe system. Couldn't change directories because slashes are appended to the dir name. I think the user should be allowed to put anything as dir name w/o any 'automatic change'.

Files containing : é è î etc ... are seen with other caracters under fillezillaserveur

There are approximately 300 FTP connections in the Site Manager (FileZilla.xml is 83,211 bytes in size, approximately 83 KB). Having so many connections in Site Manager causes a ~1 second delay before Site Manager closes and opens up the selected FTP site. There seems to be a positive correlation between the number of FTP sites and the delay before connecting - increasing the number of FTP sites increases the delay, presumably because building the XML file takes longer with more connections.

Using latest build as of 2004-04-30, FileZilla_2_2_5a_setup.exe, on Windows XP Professional, Pentium III 800, 256 MB RAM. Contact: nwong-filezilla@…

Problem:

In Win XP, toolbar background color is a gradient going from lightgray (extreme left) to darkgray (extreme right), like Internet Explorer one.

But when changing the width of the main window (by dragging its right or bottom border), this toolbar background doesn't repaint itself properly.

Solution (very easy):

Put the following class styles:

CS_VREDRAW | CS_HREDRAW

in the first parameter of AfxRegisterWndClass() in mainfrm.cpp.

cvs version

Server.cpp

CServer::WindowProc

for (std::list<CServerThread *>::iterator iter =

pServer->m_ThreadArray.begin(); iter != pServer->m_ThreadArray.end(); iter++, i++)

for (std::list<CServerThread *>::iterator iter =

pServer->m_ClosedThreads.begin(); iter != pServer->m_ClosedThreads.end(); iter++, i++)

causes this compilation error:

FileZilla Server\source\Server.cpp(188) : error C2086: 'iter' : redefinition

on MSVC6

version: FileZilla Client 2.2.5a o/s: Windows XP & 2000 description: When browsing or uploading files from CD gives error. error message: pop-up window saying "The parameter is incorrect"

If I create a new folder on the server with FileZilla and I try to change attributes appear an error message.

I noticed that when I set a bunch of files to upload and they are queued, I cannot change the remote directory into another directory while files are queued to upload. It would make sense to allow you to change remote directories for other files you want to queue and upload instead of having to wait until the last upload finished before you can queue more files to upload.

I think the welcome message should be updated every time it is changed.

Currently I have to restart the server for the changes to take effekt.

Using the v2.2.6 version, when I right-hand-click and 'download' a single file (which is a symbolic-link to the real file stored in a remote directory) the FTP is request is successful and the file is download immediatly.

However, if I use [ctrl][a] or select multiple files and then 'download' them FileZilla gets into a lengthy, almost recursive loop, presumably trying to build a filelist. With a small number of files the download is successful.

It might be that is re-freshes the remote filelist between the analysis of each of the symbolic-link files, re- counting the number of files in the directory???

Many Thanks Mike <mike@…>

Using Filezilla v2.2.6 (configured to use the French language pack) under the French version of Windows ME, I have noticed that the list that contains the custom file associations sometimes "empties itself" when I close/restart Windows (and therefore Filezilla too). Filezilla is configured to use the settings from the Registry (not from the XML file) since I have various user profiles in Windows.

(C) year needs to be bumped to 2004 ;-)