Custom Query (8171 matches)

After the latest automatic upgrade was actioned I am unable to logon to any ftp site. The build version and date details are FileZilla Client 3.3.2 built on 2010-02-21

We use a Internet proxy from websense that does http, https, ftp proxying.

We use filezilla for 3 years now for all our ftp upload/downloads over ftp, ftps without any problems. But since we switched from Cisco CE proxy to Websense proxy we cannot upload with certainty. Smaller files pass the system usually without problem, larger files 300 - 500 MB most of the time fail.

I verified that the site we were trying to upload works by connecting directly to the Internet and using filezilla to upload the files and it worked.

We opened a ticket with websense and they told us we shall use CureFTP or TotalCommander to upload. I did the test and with CureFtp all files were all the time uploaded correctly.

The settings we have to use for websense in Filezilla 3.3.1 are:

Connection->FTP->FTP Proxy

Custom

USER %u@%h PASS %p

proxy host: websense.test.com:2121 user: test password: test

We have also tested to disable ftp cache on websense but the same thing happens.

How do we know that the files are not uploaded correctly?

The transfer starts and we know that the target site has a bandwith limiter that does allow 60KBs.

The files are uploaded and when it's almost 100 percent uploaded we are presented with a dialog that says the file is already there and if we want to overwrite it. If you press overwrite the transfer will start again and at the end present you again with the same dialog.

When we called support of the target side they said the files are only around 5 million bytes instead of 13 or 23 million bytes. The target site does not allow size commands nor read of the directory etc.

• Connected to server

Reeds verbonden

FileZilla is reeds verbonden met een server.

Verbinding maken in een nieuwe tab

Change: Vorige verbinding afbreken en verbinden in nieuwe tab.

Into:

Vorige verbinding afbreken en verbinden in huidige tab.

Hi there,

I'm currently unable to download files over 30kb in size, the transfer starts and works normally, until 30kb has been downloaded, then for some reason the connection gets dropped, and the transfer restarts. Just before this was happening however, I was getting a 451 Broken Pipe detected error message.

Here are the logs from an attaempt: Response: 220 ProFTPD FTP Server ready. Command: USER design@… Response: 331 Password required for design@…. Command: PASS Response: 230 User design@… logged in. Status: Connected Status: Starting download of /var/www/html/irene_soccer_village/create_booking.php Command: CWD /var/www/html/irene_soccer_village Response: 250 CWD command successful Command: TYPE A Response: 200 Type set to A Command: PASV Response: 227 Entering Passive Mode (89,145,76,238,232,7). Command: RETR create_booking.php Response: 150 Opening ASCII mode data connection for create_booking.php (81060 bytes) Error: Disconnected from server: ECONNABORTED - Connection aborted Error: File transfer failed after transferring 29,346 bytes in 1 second Status: Resolving address of www.gptesting.co.za Status: Connecting to 89.145.76.238:21... Status: Connection established, waiting for welcome message... Response: 220 ProFTPD FTP Server ready. Command: USER design@… Response: 331 Password required for design@…. Command: PASS Response: 230 User design@… logged in. Status: Connected Status: Starting download of /var/www/html/irene_soccer_village/create_booking.php Command: CWD /var/www/html/irene_soccer_village Response: 250 CWD command successful Status: Skipping download of /var/www/html/irene_soccer_village/create_booking.php Status: File transfer skipped

Hello, I am a Filezilla 3.3.2 user on Mac OS X 10.6.2. When I am sending my files to a remote server I click and drag them to the right side of the window and release the mouse button, so far so good.

When I am sending just one file, that's when the mess happens:

All files are unselected, OK? I click in one file and the line get's a blue background. When I click again (and hold) to drag the file to the other side of the screen, the line changes to rename. So far, no damage on my files. If I don't do anything, the cursor stays there, to rename the file, if I click outside, it gets renamed OK.

If I click up there to order for filename, filesize or last modified, the file (for renaming, with a cursor for type waiting) stays in the same place on screen, it doesn't go to the place it was supposed to go, stays in front some random file that was ordered there, if you click outside to stop the renaming... I AM SURE THAT THE FILE THAT IS BEHIND, ON THAT POSITION GETS RENAMED TO THE NAME OF THE FILE I WAS RENAMING, AND THIS FILE (THAT I WAS RENAMING) GETS DELETED FOREVER!

I lose a lot of files for this matter.

You can do this to make sure (I just did).

1) Create 5 files: 1.txt, 2.txt, 3.txt, 4.txt, 5.txt, put them in the same directory, open them and just put a number on the file and save them. Then we get: 1.txt = 1. 2.txt = 2, etc...

2) Now open Filezilla and locate the folder. We get this:

1.txt 2.txt 3.txt 4.txt 5.txt

Now click ONCE on 2.txt to select this file, then click again on 2.txt (the cursor to rename appears).

3) Now click on filename (up there) to reorder by filename DESC. The screen is now like:

5.txt 2.txt (to rename) "4.txt is behind this" 3.txt 2.txt 1.txt

4) Now click outside. The 4.txt file just vanishes and if you open 2.txt, what's inside? 4

Now imagine this with a big web system, a lot of files missing and a lot bad renamed. I think it's a pretty serious bug because I use a lot the "Last modified" column to order, to make sure to send the files that was last modified.

Sorry my bad english, it's not my primary language.

Most of the time when I double click on a file, instead of going into the folder, it will open up the file rename box, which is extremely annoying. This is easily reproducible when I already have one or more items selected. In order to avoid it, I have to make sure I double click the tiny microscopic icon off to the side.

One time, I was fed up with the rename box and tried double clicking again once or twice on a folder, and some how it managed to copy the file name from one folder and rename a subfolder with that name... all through just clicking. That's really bad.

My wife was uploading games to our site and the public_html folder just went poof and our tar file went missing a few months ago also

Every file and directroy are showing with file timestamp before it. Both timestamp and filename are building a filename into filezilla, and when you are pressing enter to select a directory, the filezilla is sending "timestamp filename" together as show-command. Enstead of usual filename or directory name inside of show command into a ftp-server.

(And therefor an application is useless untill a bug fixed.)

The used client is windows (xp) and server is FTP server (Version 6.4/OpenBSD/Linux-ftpd-0.17) with Debian GNU/Linux installed as default language iso-8859-1.

2010-03-12 13:22:xxx filename or directory name

Another ftp-applications are working as usual. Also filezilla worked well before new installed unix server and new filezilla versions. Also to open ftp-connect to another ftp-own servers are working well.

Thanks, Tuomas

Often have to upload many files or files of many megabytes, Terner power would be good to filezilla as trayicon, so would risk not close the program and having to restart the rise of the files. It's just an idea, many thanks. Excellent Work-out programs both Filezilla Client and the Server, great job, I've been using the two and is the best of the best for ftp

Since 3.3.2 I get "Directory listing failed"

My ftp server machine(AIX) user's charset is : $ locale LANG= LC_COLLATE="C" LC_CTYPE="C" LC_MONETARY="C" LC_NUMERIC="C" LC_TIME="C" LC_MESSAGES="C" LC_ALL= But when i use our client(FileZilla) connect to it with charset UTF-8 the remote filename display is abnormal, filename together with modify time before it, i wondering that if you cut filename by remote command 'ls -l' and take the wrong field.

Using most recnt client at this writing (3.3.2.1) I have previously and successfully transferred files to my cox.net host space. Today, whether it was a jpg, png, bmp, gif, or pdf the transfer went without error and in a proportionate amount of time for the file size, but on the host all times but one they appeared as zero bytes and were not usable. One time they filled in with the appropriate host file size, but were found to fail to display, and on refresh were zero bytes after all. I didn't try non-image file types so they may have had the same problem. I tried this multiple times in multiple sessions and after restarts. I also changed from AUTO to Binary, and turned passive on/off with no change in outcome.

If I leave FileZilla on overnight downloading and uploading files my system runs out of resources until I reboot. Other apps have problems displaying any menus as the resources have been used up and new apps cannot be loaded until system is rebooted.

drag & drop of multiple files and/or directories from the remote file listing to the local active directory sometimes transfers the complete remote parent directory instead of the selected files.

this means that instead of showing the expected "overwrite?"-dialog for existing files in the active local directory, filezilla creates a new subdirectory with the name of the server's parent directory and transfers all of its contents. this is very annoying since it takes 2 or 3 attempts until only the selected files are transferred to the right place and i can use the advantage of comparing file size & date when filezilla asks whether to overwrite or not. additional this means i have to cancel huge queues of files in subdirectories that i did not want to be transferred and delete the already transferred ones from the wrong directory on my harddisk.

apparently filezilla does not recognize the active remote directory after navigating through the remote directory structure. sometimes it helps explicitly selecting another directory first and then the desired one in the remote directory tree before selecting the files for drag&drop transfer.

this issue seems to happen on about 50% of remote->local drag&drop transfers. it never happened when transferring from local to remote.

i noticed this behavior throughout all filezilla-versions in the last year, but never found a bug report. anyone with the same problem?

Appears to be similar to #4291. It does appear to be intermittent.

With all 3.3.x series FileZilla, i get a connection timeout at the end of a large file upload. Files have to be >1MB. It is always at the end of the file. It happens with every large file.

With ver 3.2.x, this is not a problem. I downgrade to 3.2.4.1 and it works ok, upgrade to 3.3.2.1 then i get timeouts again. This is why i believe it is a bug.

I only upload to 2 servers. Happened before i reformatted and reloaded Windows as well. Log files are attached.

After N files transferred through sftp using FileZilla, the queue slows down. It happens when I'm transferring one file at a time or 2 files at a time or N files at a time. It usually slows down when the third or fourth file in the queue has finished transferring.

And when it's happening, all I need to do is restart the queue after a few minutes and the speed will go back to normal.

I'm using Buffalo WHR-G125, just in case it has something to do with it.

If i drag a file direct from the FTP Server to the Desktop (not to the desktop in the local list).

FileZilla create a Folder (for example "fz3-12719247126390") and i get a error message "Konnte das Ziel der Drag&Drop-Operation nicht ermitteln. Entweder ist die Shell-Erweiterung nicht ordnungsgemäßt eingerichtet oder Sie haben die Dateien nicht in ein Explorer-Fenster gezogen".

In other folders such Documents i get the same message.

FileZilla client is friezing when trying to open local directory named like "domainname.com".

While transfering files, if choose Server and uncheck "Force showing hidden files", then files are downloaded to wrong folders

I have no problem with small file upload such as html or images on this server of mine, but when I try to upload a large video file I get a strange behavior. The log attached refers to the file Ali_my_Slum_my_Korogocho.flv which is 105 MB. The upload progress bar reaches 100% in few seconds (!!) then stops there. After some time (30 seconds or so) it gives a file transfer failed or connection time out error. It then retries to upload the file few times but it failes even before the progress bar is displayed. Finally it asks me if I want to overwrite the file alredy present on the server (which is truncated at a size around 1MB). CuteFTP initially does the same with the progress reaching 100% but then it restarts the transfer with the progress at 3/5 % and it starts uploading the file in chunks giving a bunch of "ERROR:> Temporary completion problem reply." but it eventually succeed completing the file.

Here's the log:

Status: Connecting to 85.25.120.199:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220 ProFTPD 1.3.1 Server (ProFTPD) [85.25.120.199] Trace: CFtpControlSocket::SendNextCommand() Command: USER pacifico Trace: CFtpControlSocket::OnReceive() Response: 331 Password required for pacifico Trace: CFtpControlSocket::SendNextCommand() Command: PASS Trace: CFtpControlSocket::OnReceive() Response: 230 User pacifico logged in Status: Connected Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Retrieving directory listing... Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/" is the current directory Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Trace: CFtpControlSocket::FileTransfer() Status: Starting upload of D:\Magilvia\Documenti\Web\EComPoint\KissFromTheWorld\Sito vecchio\httpdocs\cms\upload\people\video\Ali_my_Slum_my_Korogocho.flv Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: CWD /httpdocs Trace: CFtpControlSocket::OnReceive() Response: 250 CWD command successful Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: FileTransferSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: FileTransferSend() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: TYPE I Trace: CFtpControlSocket::OnReceive() Response: 200 Type set to I Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Error: Connection timed out Trace: CFtpControlSocket::ResetOperation(2114) Trace: CControlSocket::ResetOperation(2114) Trace: CFtpControlSocket::ResetOperation(2114) Trace: CControlSocket::ResetOperation(2114) Error: File transfer failed Status: Connecting to 85.25.120.199:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220 ProFTPD 1.3.1 Server (ProFTPD) [85.25.120.199] Trace: CFtpControlSocket::SendNextCommand() Command: USER pacifico Trace: CFtpControlSocket::OnReceive() Response: 331 Password required for pacifico Trace: CFtpControlSocket::SendNextCommand() Command: PASS Trace: CFtpControlSocket::OnReceive() Response: 230 User pacifico logged in Status: Connected Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::FileTransfer() Status: Starting upload of D:\Magilvia\Documenti\Web\EComPoint\KissFromTheWorld\Sito vecchio\httpdocs\cms\upload\people\video\Ali_my_Slum_my_Korogocho.flv Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: CWD /httpdocs Trace: CFtpControlSocket::OnReceive() Response: 250 CWD command successful Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: FileTransferSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: FileTransferSend() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: TYPE I Trace: CFtpControlSocket::OnReceive() Response: 200 Type set to I Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (85,25,120,199,224,187). Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: STOR Ali_my_Slum_my_Korogocho.flv Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for Ali_my_Slum_my_Korogocho.flv Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Error: Connection timed out Trace: CFtpControlSocket::ResetOperation(2114) Trace: CControlSocket::ResetOperation(2114) Trace: CFtpControlSocket::ResetOperation(2114) Trace: CControlSocket::ResetOperation(2114) Error: File transfer failed after transferring 105.536.430 bytes in 26 seconds Status: Connecting to 85.25.120.199:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220 ProFTPD 1.3.1 Server (ProFTPD) [85.25.120.199] Trace: CFtpControlSocket::SendNextCommand() Command: USER pacifico Trace: CFtpControlSocket::OnReceive() Response: 331 Password required for pacifico Trace: CFtpControlSocket::SendNextCommand() Command: PASS Trace: CFtpControlSocket::OnReceive() Response: 230 User pacifico logged in Status: Connected Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::FileTransfer() Status: Starting upload of D:\Magilvia\Documenti\Web\EComPoint\KissFromTheWorld\Sito vecchio\httpdocs\cms\upload\people\video\Ali_my_Slum_my_Korogocho.flv Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: CWD /httpdocs Error: Connection timed out Trace: CFtpControlSocket::ResetOperation(2114) Trace: CControlSocket::ResetOperation(2114) Trace: CFtpControlSocket::ResetOperation(2114) Trace: CControlSocket::ResetOperation(2114) Error: File transfer failed Status: Connecting to 85.25.120.199:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220 ProFTPD 1.3.1 Server (ProFTPD) [85.25.120.199] Trace: CFtpControlSocket::SendNextCommand() Command: USER pacifico Trace: CFtpControlSocket::OnReceive() Response: 331 Password required for pacifico Trace: CFtpControlSocket::SendNextCommand() Command: PASS Trace: CFtpControlSocket::OnReceive() Response: 230 User pacifico logged in Status: Connected Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::FileTransfer() Status: Starting upload of D:\Magilvia\Documenti\Web\EComPoint\KissFromTheWorld\Sito vecchio\httpdocs\cms\upload\people\video\Ali_my_Slum_my_Korogocho.flv Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: CWD /httpdocs Trace: CFtpControlSocket::OnReceive() Response: 250 CWD command successful Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: FileTransferSubcommandResult() Status: Retrieving directory listing... Trace: ftpcontrolsocket.cpp(1280): List called from other command caller=0p31a2578 Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: TYPE I Trace: CFtpControlSocket::OnReceive() Response: 200 Type set to I Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (85,25,120,199,166,154). Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening ASCII mode data connection for file list Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226-Transfer complete Trace: CFtpControlSocket::OnReceive() Response: 226 Quotas off Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: FileTransferSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: FileTransferSend() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (85,25,120,199,196,233). Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: REST 221920 Trace: CFtpControlSocket::OnReceive() Response: 350 Restarting at 221920. Send STORE or RETRIEVE to initiate transfer Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: STOR Ali_my_Slum_my_Korogocho.flv Trace: CFtpControlSocket::OnReceive() Response: 451 Ali_my_Slum_my_Korogocho.flv: Append/Restart not permitted, try again Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: FileTransferSubcommandResult() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Error: File transfer failed Trace: CFtpControlSocket::FileTransfer() Status: Starting upload of D:\Magilvia\Documenti\Web\EComPoint\KissFromTheWorld\Sito vecchio\httpdocs\cms\upload\people\video\Ali_my_Slum_my_Korogocho.flv Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: FileTransferSubcommandResult() Status: Retrieving directory listing... Trace: ftpcontrolsocket.cpp(1280): List called from other command caller=0p31a2578 Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (85,25,120,199,203,166). Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: REST 0 Trace: CFtpControlSocket::OnReceive() Response: 350 Restarting at 0. Send STORE or RETRIEVE to initiate transfer Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: LIST Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Opening ASCII mode data connection for file list Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226-Transfer complete Trace: CFtpControlSocket::OnReceive() Response: 226 Quotas off Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: FileTransferSubcommandResult() Status: Skipping upload of D:\Magilvia\Documenti\Web\EComPoint\KissFromTheWorld\Sito vecchio\httpdocs\cms\upload\people\video\Ali_my_Slum_my_Korogocho.flv Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: File transfer successful, transferred 12.507 bytes in 60 seconds

When my internet crashes or something stops my upload, I used to be able to re-drag the file and it would give me a screen with several options. I used to just press resume and it would continue uploading from where it started. However it does not allow this anymore, once the internet has crashed I cannot do anything with the partly uploaded file, I cannot resume or delete it etc. The message states that the file is still in use.

I used to then have to restart the computer for it to release the file so i could delete it or resume the upload, however now that is not even working and I have to rename the file on my desktop and start the upload from scratch.

Hello I uninstall my filezilla and restart my computer. I don't see program on program list but I can use it from my task bar. I am using windows 7 home premium. Please advise.

Hello, when I connect to my server and send a lot of files like 5000 or more then about 3/4 of the Q I get the following errors and it will not process any more files.

Response:	421 Too many connections (8) from this IP
Error:	Could not connect to server
Status:	Delaying connection for 5 seconds due to previously failed connection attempt...
Status:	Connecting to 174.132.77.158:21...
Status:	Connection established, waiting for welcome message...
Response:	421 Too many connections (8) from this IP
Error:	Could not connect to server

So in the File->Site Manager->Transfer Settings Tab I edit "Limit Number of Connections" I set to 6 connections max. Yet when I connect to my server to upload a bunch of files again I get the same exact error with too many connections (8).

This has been a very annoying bug for a long time, which I should have reported earlier but I kind of thought that someone would have run across this by now but I guess not.

Occasionally when transferring files, FileZilla client uses 100% of the physical memory available (I have 8GiB in the machine, and FileZilla goes up to approx. 92% of that) and the disk starts to thrash, significantly degrading performance.

Nothing is logged during this.

Once the file in the queue finishes, the memory is all released correctly and the operating system eventually recovers.

FileZilla Client version 3.3.2.1, built 2010-03-21 but this problem has been happening for at least the last 6 months in various versions, if not longer.

Seems to be more apparent on larger files (several gigabytes) but this could just be because they take longer to transfer, so the chance of it happening increases. It generally happens suddenly in the middle of an existing transfer.

Unfortunately because it is so sporadic, it is hard to replicate.

I had 2 crashes of the server today. Maybe this info will help find a problem. Don't see a trigger.

Derek Jackson

Don't see a way to get you the dump file

Event Viewer Event Type: Error Event Source: Application Error Event Category: (100) Event ID: 1000 Date: 6/4/2010 Time: 4:45:49 PM User: N/A Computer: DENVER-FTP Description: Faulting application FileZilla Server.exe, version 0.9.34.0, faulting module FileZilla Server.exe, version 0.9.34.0, fault address 0x00007f68.

For more information, see Help and Support Center at ​http://go.microsoft.com/fwlink/events.asp. Data: 0000: 41 70 70 6c 69 63 61 74 Applicat 0008: 69 6f 6e 20 46 61 69 6c ion Fail 0010: 75 72 65 20 20 46 69 6c ure Fil 0018: 65 5a 69 6c 6c 61 20 53 eZilla S 0020: 65 72 76 65 72 2e 65 78 erver.ex 0028: 65 20 30 2e 39 2e 33 34 e 0.9.34 0030: 2e 30 20 69 6e 20 46 69 .0 in Fi 0038: 6c 65 5a 69 6c 6c 61 20 leZilla 0040: 53 65 72 76 65 72 2e 65 Server.e 0048: 78 65 20 30 2e 39 2e 33 xe 0.9.3 0050: 34 2e 30 20 61 74 20 6f 4.0 at o 0058: 66 66 73 65 74 20 30 30 ffset 00 0060: 30 30 37 66 36 38 007f68

appcompat

<?xml version="1.0" encoding="UTF-16"?> <DATABASE> <EXE NAME="FileZilla Server.exe" FILTER="GRABMI_FILTER_PRIVACY">

<MATCHING_FILE NAME="dbghelp.dll" SIZE="940032" CHECKSUM="0xDD801F8E" BIN_FILE_VERSION="6.3.17.0" BIN_PRODUCT_VERSION="6.3.17.0" PRODUCT_VERSION="6.3.0017.0" FILE_DESCRIPTION="Windows Image Helper" COMPANY_NAME="Microsoft Corporation" PRODUCT_NAME="Debugging Tools for Windows(R)" FILE_VERSION="6.3.0017.0 (DbgBuild.040415-1850)" ORIGINAL_FILENAME="DBGHELP.DLL" INTERNAL_NAME="DBGHELP.DLL" LEGAL_COPYRIGHT="© Microsoft Corporation. All rights reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0xE93E1" LINKER_VERSION="0x50000" UPTO_BIN_FILE_VERSION="6.3.17.0" UPTO_BIN_PRODUCT_VERSION="6.3.17.0" LINK_DATE="05/25/2004 00:28:03" UPTO_LINK_DATE="05/25/2004 00:28:03" VER_LANGUAGE="English (United States) [0x409]" /> <MATCHING_FILE NAME="FileZilla Server Interface.exe" SIZE="1208832" CHECKSUM="0xA4A3C3D2" BIN_FILE_VERSION="0.9.34.0" BIN_PRODUCT_VERSION="0.9.34.0" PRODUCT_VERSION="0, 9, 34, 0" FILE_DESCRIPTION="FileZilla Server" COMPANY_NAME="FileZilla Project" PRODUCT_NAME="FileZilla Server" FILE_VERSION="0, 9, 34, 0" ORIGINAL_FILENAME="FileZilla server.EXE" INTERNAL_NAME="FileZilla Server" LEGAL_COPYRIGHT="Copyright (C) 2001-2009" VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x4" VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0x133014" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="0.9.34.0" UPTO_BIN_PRODUCT_VERSION="0.9.34.0" LINK_DATE="12/30/2009 23:25:06" UPTO_LINK_DATE="12/30/2009 23:25:06" VER_LANGUAGE="German (Germany) [0x407]" /> <MATCHING_FILE NAME="FileZilla Server.exe" SIZE="703488" CHECKSUM="0x76D6E70F" BIN_FILE_VERSION="0.9.34.0" BIN_PRODUCT_VERSION="0.9.34.0" PRODUCT_VERSION="0, 9, 34, 0" FILE_DESCRIPTION="FileZilla Server" COMPANY_NAME="FileZilla Project" PRODUCT_NAME="FileZilla Server" FILE_VERSION="0, 9, 34, 0" ORIGINAL_FILENAME="FileZilla server.EXE" INTERNAL_NAME="FileZilla Server" LEGAL_COPYRIGHT="Copyright (C) 2001-2009" VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x4" VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0xB609A" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="0.9.34.0" UPTO_BIN_PRODUCT_VERSION="0.9.34.0" LINK_DATE="12/30/2009 23:24:33" UPTO_LINK_DATE="12/30/2009 23:24:33" VER_LANGUAGE="German (Germany) [0x407]" /> <MATCHING_FILE NAME="FzGSS.dll" SIZE="82944" CHECKSUM="0x8D8391F1" MODULE_TYPE="WIN32" PE_CHECKSUM="0x234BB" LINKER_VERSION="0x0" LINK_DATE="12/30/2009 23:24:36" UPTO_LINK_DATE="12/30/2009 23:24:36" /> <MATCHING_FILE NAME="libeay32.dll" SIZE="1012224" CHECKSUM="0x6A02F89C" BIN_FILE_VERSION="0.9.8.12" BIN_PRODUCT_VERSION="0.9.8.12" PRODUCT_VERSION="0.9.8l" FILE_DESCRIPTION="OpenSSL Shared Library" COMPANY_NAME="The OpenSSL Project, ​http://www.openssl.org/" PRODUCT_NAME="The OpenSSL Toolkit" FILE_VERSION="0.9.8l" ORIGINAL_FILENAME="libeay32.dll" INTERNAL_NAME="libeay32" LEGAL_COPYRIGHT="Copyright © 1998-2007 The OpenSSL Project. Copyright © 1995-1998 Eric A. Young, Tim J. Hudson. All rights reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x4" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0xF9DD3" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="0.9.8.12" UPTO_BIN_PRODUCT_VERSION="0.9.8.12" LINK_DATE="12/31/2009 09:16:29" UPTO_LINK_DATE="12/31/2009 09:16:29" VER_LANGUAGE="English (United States) [0x409]" /> <MATCHING_FILE NAME="ssleay32.dll" SIZE="200704" CHECKSUM="0x97E87E19" BIN_FILE_VERSION="0.9.8.12" BIN_PRODUCT_VERSION="0.9.8.12" PRODUCT_VERSION="0.9.8l" FILE_DESCRIPTION="OpenSSL Shared Library" COMPANY_NAME="The OpenSSL Project, ​http://www.openssl.org/" PRODUCT_NAME="The OpenSSL Toolkit" FILE_VERSION="0.9.8l" ORIGINAL_FILENAME="ssleay32.dll" INTERNAL_NAME="ssleay32" LEGAL_COPYRIGHT="Copyright © 1998-2007 The OpenSSL Project. Copyright © 1995-1998 Eric A. Young, Tim J. Hudson. All rights reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x4" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0x3C640" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="0.9.8.12" UPTO_BIN_PRODUCT_VERSION="0.9.8.12" LINK_DATE="12/31/2009 09:16:48" UPTO_LINK_DATE="12/31/2009 09:16:48" VER_LANGUAGE="English (United States) [0x409]" /> <MATCHING_FILE NAME="Uninstall.exe" SIZE="45365" CHECKSUM="0x90CACDA" MODULE_TYPE="WIN32" PE_CHECKSUM="0x0" LINKER_VERSION="0x60001" LINK_DATE="09/09/2009 13:23:23" UPTO_LINK_DATE="09/09/2009 13:23:23" />

</EXE> <EXE NAME="kernel32.dll" FILTER="GRABMI_FILTER_THISFILEONLY">

<MATCHING_FILE NAME="kernel32.dll" SIZE="984576" CHECKSUM="0xF0B331F6" BIN_FILE_VERSION="5.1.2600.3119" BIN_PRODUCT_VERSION="5.1.2600.3119" PRODUCT_VERSION="5.1.2600.3119" FILE_DESCRIPTION="Windows NT BASE API Client DLL" COMPANY_NAME="Microsoft Corporation" PRODUCT_NAME="Microsoft® Windows® Operating System" FILE_VERSION="5.1.2600.3119 (xpsp_sp2_gdr.070416-1301)" ORIGINAL_FILENAME="kernel32" INTERNAL_NAME="kernel32" LEGAL_COPYRIGHT="© Microsoft Corporation. All rights reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0xF9293" LINKER_VERSION="0x50001" UPTO_BIN_FILE_VERSION="5.1.2600.3119" UPTO_BIN_PRODUCT_VERSION="5.1.2600.3119" LINK_DATE="04/16/2007 15:52:53" UPTO_LINK_DATE="04/16/2007 15:52:53" VER_LANGUAGE="English (United States) [0x409]" />

</EXE> </DATABASE>

manifest

Server=watson.microsoft.com UI LCID=1033 Flags=1672016 Brand=WINDOWS TitleName=FileZilla Server.exe DigPidRegPath=HKLM\Software\Microsoft\Windows NT\CurrentVersion\DigitalProductId ErrorText=If you were in the middle of something, the information you were working on might be lost. Stage1URL= Stage1URL=/StageOne/FileZilla Server_exe/0_9_34_0/FileZilla Server_exe/0_9_34_0/00007f68.htm Stage2URL= Stage2URL=/dw/stagetwo.asp?szAppName=FileZilla Server.exe&szAppVer=0.9.34.0&szModName=FileZilla Server.exe&szModVer=0.9.34.0&offset=00007f68 DataFiles=C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\WER98a1.dir00\FileZilla Server.exe.mdmp|C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\WER98a1.dir00\appcompat.txt Heap=C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\WER98a1.dir00\FileZilla Server.exe.hdmp ErrorSubPath=FileZilla Server.exe\0.9.34.0\FileZilla Server.exe\0.9.34.0\00007f68 DirectoryDelete=C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\WER98a1.dir00

LOG

[http:\\todayworks.com\LargeFiles\fzs-2010-06-04.txt]

My filezilla client keeps freezing up when moving files over. What can I do to fix this?

When going to certain sites (using SFTP), it gets there, BUT when I try to "Drill Down" into the site, it immediately crashes. This only occurs on a couple of the sites on my web server. It did not occur until I upgraded from Fedora 12 -> 13. I initially used the Fedora install of filezilla, and since the crash was occurring, uninstalled it and downloaded/compiled the most recent version from your site. Still happening. Weird thing is, I have WindowsXP installed on this machine in VirtualBox and filezilla works fine there.

When I right-click on a remote file and choose View/Edit, I get an error message that says "DDE Execute request failed: A request for a synchronous execute transaction has timed out." The file I am trying to edit is web.config which I have associated to open with Notepad++. When I click View/Edit in Filezilla, it opens Visual Studio 2005, displays the error message in Filezilla, and does NOT open the file.

If uploading file test.ear to directory /export/stage the stage is added to the filename.

eg. /export/stagetest.ear

I upload: to an AIX 4.3

See example:

Kommando: cd "/test/stage" Respons: New directory is: "/export/stage" Kommando: put "D:\development\deploy\test.ear" "test.ear" Status: local:D:\development\deploy\test.ear => remote:/export/stagetest.ear Status: Filoverførsel lykkedes, overført 18.624.512 byte på 4 sekunderKommando: cd "/export/stage" .... Status: Filoverførsel lykkedes, overført 18.624.512 byte på 4 sekunder

In many distribution there are some file with a size at 0 (typically some index.html). With filezilla this files are not created on the destination directory and appear on the failed list. We then have to recreate manualy each of them...

Thanks to handle the creation of these file on the destination directory.

Here under Filezilla info :

FileZilla Client

Version: 3.3.3 Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2010-06-13 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.11 GnuTLS: 2.8.3

Operating system:

Name: Windows NT 6.1 (build 7600) Version: 6.1 Platform: 64 bit system

Hi There,

if file are more than 1978 in directry then its not shows full file its just shows 1978 file.

on my server there 2500+ files but its shows only 1978 files other files not shown

please sove this bug.

Thanks Sheraz Aslam

after downloading a file using filezilla (the file was 10gb)and checking the md5sum of the file, the md5sum of the resultant file differed from the md5sum of the original file. whats more the file differed at byte 2147483648, the point the filesize would overflow a signed 32 bit integer. i have re-downloaded the orignal file using ssh on linux (opposed to how it was originally downloaded using filezilla on 32 bit windows server 2003) and the md5sum matches, i transfered it to the windows machine using samba and the md5sum STILL matches, which takes windows out of the equation as the source of the corruption. also being that it occurred AT 2147483648, corruption from download seems unlikely.

I upgraded from previous version 3.3.? and lost all my sites.

FileZilla Client

Version: 3.3.3

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2010-06-13 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.11 GnuTLS: 2.8.3

Operating system:

Name: Windows Vista (build 6000) Version: 6.0 Platform: 32 bit system

hi guyz i entered ​http://ip.filezilla-project.org/ip.php but shows 127.0.0.1 many people had this problem when using older versions of filezilla but this is the newest !

Sometimes if I click a folder, I get the message: "Error: Disconnected from server: ECONNABORTED - Connection aborted Error: Failed to retrieve directory listing"

Yes, I know you're never gonna fix ECONNABORTED, but there are two problems here:

1. If I have directory sync on and click a local folder in the directory tree pane, that folder still appears selected but the folder isn't changed. This means I have to click somewhere else, then click back again to load the folder.
2. If I hit F5 then FileZilla reconnects perfectly fine, so this should just be done automatically.

Prior to 3.3.3, right-clicking on a local file used to open that file for editing with the Custom Editor I had specified in "Edit > Settings > File editing > Default editor".

This functionality only returned after I selected "Edit > Settings > File editing > Always use default editor"

As the manager of the ftp, when I try to open some files, the response "550 failed to change directoy" occurs and I don't have access to the content of theses files. The ftp is ftp.agementit.com and the login is agrementu.

Here is a copy of the error which appears (in french):

Commande : CWD 03. Informations personnelles Réponse : 550 Failed to change directory. Erreur : Échec lors de la récupération du contenu du dossier

Thanks for your help

If 2 dialog/pop-ups/confirmations come up right after another, for any reason, then filezilla will not allow me to click either of them to confirm or cancel either of them. nothing in the UI (on the regular windows or the confirmations) respond when you click them. it basically freezes filezilla... making it so i have to force quit and reopen filezilla again.

When transferring a file it locks up in the middle of the transfers.What could be causing this?im using the most recent version of filezilla.. please help.

Thank you

While caching remote directory content _may_ be something sane to do, when i double click on a remote file i expect to download the latest stuff available and not what is available from filezilla cache.

filezilla 3.3.3

I am using vista on an hp pavilion dv9700. The program has been working fine and now I am getting this error.

I have tried uninstalling and reinstalling and also upgrading but now nothing is working.

When I try to upload a folder via FTP, it seems to be messing up, rather than uploading to: wordpress\wp-admin\css\theme-editor.css, for example, it uploads to: wordpress\wp-admin\csstheme-editor.css

any ideas?

After upgrading to 3.3.4, while trying to run program, proces filezilla.exe takes over 2 GB of RAM, and then już quits without showing any message or other window.

in windows logs i'v found:

• <Event xmlns="​http://schemas.microsoft.com/win/2004/08/events/event">
• <System> <Provider Name="Application Error" /> <EventID Qualifiers="0">1000</EventID> <Level>2</Level> <Task>100</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2010-08-13T21:25:49.000000000Z" /> <EventRecordID>18279</EventRecordID> <Channel>Application</Channel> <Computer>scanner1</Computer> <Security /> </System>
• <EventData> <Data>filezilla.exe</Data> <Data>3.3.4.0</Data> <Data>4c646632</Data> <Data>unknown</Data> <Data>0.0.0.0</Data> <Data>00000000</Data> <Data>c0000005</Data> <Data>00000243</Data> <Data>1808</Data> <Data>01cb3b2e0881c10b</Data> <Data>C:\Program Files (x86)\FileZilla FTP Client\filezilla.exe</Data> <Data>unknown</Data> <Data>5798c5ec-a721-11df-ab60-00241d7d3cd6</Data> </EventData> </Event>

Repro Steps:

1. Open FZ and connect to a ftp server
2. Open one directory and create a folder with Chinese name, such as "格里"
3. Click the new added folder

Then the name is changed to unreadable code.

Our office has just updated to the latest version of Filezilla. Every time you open this application now, the "Welcome to Filezilla" dialog pops up. We have all tried searching to see where this can be turned off but there does not appear to be a setting.

A small but annoying "feature".

Thanks

Barb

I have problem where we run a CAD program CATIA V4 on AIX Unix. We would like to use FileZilla to tranfer the some of these file when needed for PC CAM software, Windows 2003 R2 Servers.

The problem is CATIA use a Special Symbol Character in the Unix file name which in windows is ALT 0177 (plus,minus on top of each other).

When we try to tranfer these files using FileZilla we get error, "Error: Critical file transfer error"

These Symbol Charcter can be renamed to spaces in file names would be file or _.

Thanks, Lance

The reconnect button on version 3.3.4.1 is not working

I'm justan ignorant user who doesnt know waht a client or a server is. All I know is that I can use filezilla fine for lots of other machine but not for topcities. Ive asked you before but got no response. Do I need a degree in information technology just to report a bug? Is it really too hard for you to make filezilla work for topcities?

Here's what 'help' says: FileZilla Client

Version: 3.3.4.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2010-08-16 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.11 GnuTLS: 2.8.3

Operating system:

Name: Windows Vista (build 6002, Service Pack 2) Version: 6.0 Platform: 32 bit system

Here's what happens when i try to get my topcities account:

Status: Resolving address of donhe.topcities.com Status: Connecting to 72.37.164.203:21... Status: Connection established, waiting for welcome message... Response: 220 topcities.com NcFTPd Server (licensed copy) ready. Command: USER donhe Response: 331 User donhe okay, need password. Command: PASS Response: 230-####################################################################### Response: 230-####################################################################### Response: 230- Response: 230-Welcome, donhe. You are now logged into your account. Response: 230- Response: 230-Your web site address: ​http://donhe.topcities.com Response: 230-You are connected from IP Address: 122.106.40.177 Response: 230-Space limit for your account: 153600000 bytes Response: 230-Space used: 69158732 bytes Response: 230-Maximum per-file size: 5000 Kb Response: 230-Upload bandwidth limit: 3 kB/sec Response: 230-Download bandwidth limit: 2 kB/sec Response: 230-PT: 0.72 Response: 230- Response: 230-Note: Please do not exceed your account quota by uploading files Response: 230-larger than 900Kb or exceeding your space limit. If you do, subsequent Response: 230-uploads will be unsucessful without notice to you. Response: 230- Response: 230-####################################################################### Response: 230-####################################################################### Response: 230- Response: 230- Response: 230- Response: 230 Restricted user logged in. Command: SYST Response: 215 UNIX Type: L8 Command: FEAT Response: 211-Extensions supported: Response: CLNT Response: MDTM Response: MLST type*;size*;modify*;UNIX.mode*;UNIX.owner;UNIX.uid;UNIX.group;UNIX.gid;unique Response: PASV Response: REST STREAM Response: SIZE Response: TVFS Response: Compliance Level: 19981201 (IETF mlst-05) Response: 211 End. Command: OPTS MLST type;size;modify;unix.mode;unix.owner;unix.uid;unix.group;unix.gid; Response: 200 Options accepted: type;size;modify;unix.mode;unix.uid;unix.gid Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is cwd. Command: TYPE I Response: 200 Type okay. Command: PASV Response: 227 Entering Passive Mode (72,37,164,203,215,230) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

"Routing and Remote Access" service (which is enabled and set to Autostart by default in some server versions of Windows) might mangle outgoing FTP packets, replacing the server's external IP-address (such as 96.68.37.69) in PASV responses with server's local IP-address (such as 192.168.0.1) if the server in question is running behind NAT.

Such behaviour was observed on Windows SBS Server 2003 SP2. It can be verified by running Wireshark and comparing actual outgoing packets with Filezilla server log records.

Filezilla server should at least warn the user, if this service is running, that it might affect passive mode, otherwise people will be clueless.

I do not know whether this "feature" of RRA can be disabled or not, i have fixed it by disabling RRA itself.

I backup client's data remotely to my server behind a NAT router. I service about 20 clients. The data contains .doc, .bak, and .tif file extensions. I upload from multiple clients at a time. The size of uploads range from 4 GB to 45 GB. Client's data that is 6 GB or smaller seem to transfer ok. Now the clients with data larger than 6 GB seems to always fail or never completely transfer over. So i end up with a way smaller file size after transfer. Whenever i try to open any of the image files that were transferred, i receive this error message stating "The Compressed (zipped) folder is invalid or corrupted". What can i do to prevent this problem from happenening?

I also notice that the uploads take 24-48 hrs to fully complete. Is this normal? Or would that have to do with the speed of my ISP?

On another note, when i check the status of the uploads, i notice that some of the clients that have already finished the file transfer, are still shown in the status pane. No progress shown but the ip address and user's name of the file that was transferred are visible. I would usually just have to "Kick User" to clear it from there. Is this a common problem, and will it have any effect on any existing downloads/uploads?

Configured Filezilla server v. 0.9.36 for FTPES and FTPS.

FTPES works OK: at first login server send client certificate, after accepting, it connects to the site. FTPS does not work: same client, same server. Server does not sends certificate to client. Up on connection, I receive error: "500 Syntax error, command unrecognized".

I thought it was due to firewall so installed server and client on the same machine to remove and dependencies on firewall or routers: same result. I tested this with server version 0.9.34, 0.9.35.

CLient is Filezilla 3.3.4.1 but i had same results with SmartFTP client. FTPES log: Status: Resolving address of nycw9854 Status: Connecting to 10.3.7.240:21... Status: Connection established, waiting for welcome message... Response: 220-FileZilla Server version 0.9.36 beta Response: 220 DD Test Command: AUTH TLS Response: 234 Using authentication type TLS Status: Initializing TLS... Status: Verifying certificate... Command: USER ddtest Status: TLS/SSL connection established. Response: 331 Password required for ddtest Command: PASS Response: 230 Logged on Command: SYST Response: 215 UNIX emulated by FileZilla Command: FEAT Response: 211-Features: Response: MDTM Response: REST STREAM Response: SIZE Response: MLST type*;size*;modify*; Response: MLSD Response: AUTH SSL Response: AUTH TLS Response: UTF8 Response: CLNT Response: MFMT Response: 211 End Command: PBSZ 0 Response: 200 PBSZ=0 Command: PROT P Response: 200 Protection level set to P Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current directory. Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (10,3,7,240,19,138) Command: MLSD Response: 150 Connection accepted Response: 226 Transfer OK Status: Directory listing successful Status: Disconnected from server

FTPS log: Status: Resolving address of nycw9854 Status: Connecting to 10.3.7.240:990... Status: Connection established, initializing TLS... Error: Connection timed out Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of nycw9854 Status: Connecting to 10.3.7.240:990... Status: Connection established, initializing TLS... Error: Connection timed out Error: Could not connect to server

Server log:

(000011)9/10/2010 16:46:12 PM - (not logged in) (10.3.7.240)> Connected, sending welcome message... (000011)9/10/2010 16:46:12 PM - (not logged in) (10.3.7.240)> AUTH TLS (000011)9/10/2010 16:46:12 PM - (not logged in) (10.3.7.240)> 234 Using authentication type TLS (000011)9/10/2010 16:46:13 PM - (not logged in) (10.3.7.240)> SSL connection established (000011)9/10/2010 16:46:23 PM - (not logged in) (10.3.7.240)> USER ddtest (000011)9/10/2010 16:46:23 PM - (not logged in) (10.3.7.240)> 331 Password required for ddtest (000011)9/10/2010 16:46:23 PM - (not logged in) (10.3.7.240)> PASS (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> 230 Logged on (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> SYST (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> 215 UNIX emulated by FileZilla (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> FEAT (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> 211-Features: (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> MDTM (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> REST STREAM (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> SIZE (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> MLST type*;size*;modify*; (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> MLSD (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> AUTH SSL (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> AUTH TLS (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> UTF8 (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> CLNT (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> MFMT (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> 211 End (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> PBSZ 0 (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> 200 PBSZ=0 (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> PROT P (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> 200 Protection level set to P (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> PWD (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> 257 "/" is current directory. (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> TYPE I (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> 200 Type set to I (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> PASV (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> 227 Entering Passive Mode (10,3,7,240,19,138) (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> MLSD (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> 150 Connection accepted (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> SSL connection for data connection established (000011)9/10/2010 16:46:23 PM - ddtest (10.3.7.240)> 226 Transfer OK (000011)9/10/2010 16:46:31 PM - ddtest (10.3.7.240)> disconnected. (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> Connected, sending welcome message... (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> C (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> ?LŠ™·ù$´26*ŽÃ‚ AŽ¯²N®ç‰ \›&‡(000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 3 (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 9 (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 2 (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 8 (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> f (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> / (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 5 (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> (000012)9/10/2010 16:46:31 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000012)9/10/2010 16:46:52 PM - (not logged in) (10.3.7.240)> disconnected. (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> Connected, sending welcome message... (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> C (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> ?LŠ™ä×mCßõ¿Wü è$¥8áâÚVèjÈ!Ú (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 3 (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 9 (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 2 (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 8 (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> f (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> / (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 5 (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> (000013)9/10/2010 16:46:57 PM - (not logged in) (10.3.7.240)> 500 Syntax error, command unrecognized. (000013)9/10/2010 16:47:18 PM - (not logged in) (10.3.7.240)> disconnected.

Filezilla Server and Filezilla client installed on the same machine - for test.

Error occurring only if using FileZilla client v 3.3.4.1 i.e. Failed to retrieve directory listing I am able to access data from FileZilla server with FileZilla ftp client V3.3.3 But same user can not able to access in FileZilla ftp client v3.3.4.1 ftps: *

Anytime i right mouse click in FileZilla it crashes the program and displays the following message ?

Error Signature AppName: filezilla.exe AppVer: 3.3.4.1 ModName: oleacc.dll ModVer: 4.2.5406.0 Offset: 0001e368

Befehl: CWD /Test*test Antwort: 550 /Test*test: No such file or directory

Somehow it should be escaped as wxFTP class of wxWidgets does handle it properly.

I know that other tickets have been submitted on this issue before, but they are a bit different, and have not been resolved...

When I try to open FileZilla, I receive an error window reading "Error loading xml file

Could not load/Users.../.filezilla/filezilla.xml, make sure the file is valid.

For this session, default settings will be used and any changes to the settings are not persistent."

Upon clicking "OK," it requests that I file a bug report.

At this point, FZ opens, and my Quickconnect locations are still present, but the window opens to default settings, not the last setting entered.

When I search for ".filezilla" or "filezilla.xml," they are not found. Can these files be created somehow?

When I try to upload to a site outside my firewall, the transfer starts, then bogs down and eventually dies. Sending a similar file to a server inside the firewall send okay (so far).

I am running FZ 3.0.6 with Mac OS 10.4.11.

I tried to download a new version of FZ, but the latest version is for Mac OS 10.5+ only, and I can't find an archive on your site to download something in between 3.0 and 3.3. So, I'm still using the version I originally downloaded.

Is this a local problem, a software problem, or a user error?

i'm using an ftp proxy (suse proxy suite) it's an native ftp proxy running on port 8082

with the older filezilla version 2 its working !

ftp proxy settings user@host password

login to ftp server works fine. i get also the directory listing. download works

but i can't upload files to the ftp server.

the upload hangs on the STOR command (after PASV) and a timeout will be generated.

with an older filezilla version it works.

On my machine i have associated ftp links to FileZilla. When i click on any FTP links it is giving critical error. It happens only when the username/password has special characters like below.

​ftp://SC03167c:nb{FM6nx@ftp.india.madan.com/

Following is the error:

Error: Critical error Error: Could not connect to server

But, if i launch the Filezilla and directly enter the above FTP link in HOST field, it is working fine.

Upgraded FZ from 3.3.2.1 to 3.3.4.1. All my Site Manager entries were lost. Really hacked me off. Now I have to contact the various server IT personnel to retrieve login info.

I am using 3.3.4.1 - When I upload any .sh files and then try and run it on the server I get a bad interpreter in the shell. If I view the file online it looks ok. If I transfer it with an old version of WS_FTP it works fine. I deleted and re-entered the .sh as ASCII transfer in the File Extensions section but it didn't help.

hello, I've got a problem with one one of my websites since the newest version of filezilla. I've got this error : Erreur : Déconnecté du serveur : ECONNABORTED - Connection aborted Erreur : Échec lors de la récupération du contenu du dossier I can still connect from the windows explorer to this ftp, and I can use filezilla for my others ftps accounts. I didn't change anything on my computer (except the update of filezilla). Thanks in advance for your help.

I am trying to transfer files from a zip file into a folder, then use filezilla to make the files available for others to download.

I,ve searched the forum, read and followed a how to use Filezilla tutorial but I keep getting:

FileZilla Server version 0.9.36 beta Copyright 2001-2010 by Tim Kosse (tim.kosse@…) Connecting to server... Connected, waiting for authentication Logged on Retrieving account settings, please wait... Done retrieving account settings Sending account settings, please wait... Protocol error: Invalid data, could not import account settings. Could not change account settings Retrieving account settings, please wait... Done retrieving account settings Sending account settings, please wait... Protocol error: Invalid data, could not import account settings. Could not change account settings Retrieving account settings, please wait... Done retrieving account settings Sending account settings, please wait... Protocol error: Invalid data, could not import account settings. Could not change account settings

Also, do I need to download Filezilla Client for transfering the fike making them available for others THEN download and use SERVER to make files available for others to download? Because I only used the SERVER. I am using a Window vista computer

When transfering files on local network the interface locks and accessing other windows and performing clicks, typing etc. is hindered.

1. Create folder
2. MLSD folder
3. Empty string is returned over data connection
4. Expected: MLS response for that folder.

It works fine with files. It returns 550 Directory not found when folder does not exist, which is also correct.

S: 220-FileZilla Server version 0.9.36 beta S: 220-written by Tim Kosse (Tim.Kosse@…) S: 220 Please visit ​http://sourceforge.net/projects/filezilla/ ... C: MKD mlsd_specific_folder S: 257 Directory created successfully C: PORT 127,0,0,1,190,16 S: 200 Port command successful C: MLSD mlsd_specific_folder Data connection established. S: 150 Opening data channel for directory list. S: 226 Transfer OK S: C: QUIT

filezilla breaks off the connection when I try to upload files to zymic

Hello, until the latest version (3.3.4.1) everything always went "smooth" without problems... with this latest version now 1 or 2 files out of a group of around 7 to 10 or more images do not transfer... they stop at some random % and don't transfer after restarting FZ, selecting the file(s) that was/were not transferred and "re-transferring" it/them, it works... happens every time and it's kinda frustrating i have not changed any settings, only change was updating to the latest version below the info about my version (MAC)

FileZilla Client

Version: 3.3.4.1

Build information:

Compiled for: i686-apple-darwin9 Compiled on: i386-apple-darwin9.8.0 Build date: 2010-08-15 Compiled with: i686-apple-darwin9-gcc-4.0.1 (GCC) 4.0.1 (Apple Inc. build 5465) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.11 GnuTLS: 2.8.3

Operating system:

Name: Mac OS X (Darwin 9.8.0 i386) Version: 16.88

When I transfer a file from my Fedora 14 64bit machine it became unresponsive with grey screen after successful file transfer to server. Then I can only Force Quit it.

My machine details is: Machine: Dell Latitude D620 Laptop Processor: Intel Core2Duo T7200 @ 2.0GHz Ram: 2GB Operating System: Fedora 14 (Laughlin) Kernel: Linux 2.6.35.6-48.fc14.x86_64

since 11/02/10 I can not upload any file to my directory. when I attempt to upload the file gives me an overwrite prompt. I select overwrite and the file name goes to the directory with "0" file size uploaded.

I have a LOT of sites in the site manager. When I pop down the list with the down arrow, it rolls off the bottom of the screen. It needs to determine the screen dimensions and turn on a scroll bar when the list is too long to show.

when you edit a file from the FTP server, save it in the host application and close this one, you get a prompt from FZ to upload it and a checkbox to finish editing it and delete the local copy. When much later on, you close FZ, it tells you you still have files being edited.

related to #3893

I am cconsistently gettin this error

Network error: Software caused connection abort Error: Could not connect to server

Hi, I have a serious problem with ftps on my eeePC (WinXP Home 32, intel atom): as soon as i use ftps (SSL), filezilla(3.3.4.1) keeps hanging up the entire system and sometimes even crashes. the connections are really slow and the gui is not really responsive. connecting over normal ftp is no problem. i use filezilla server(0.9.37 beta) on my other pc(Win7 x64, Core i7), which is pretty fast and has no problems with this.

i understand that ssl needs cpu power, but is it necessary to crash filezilla?

I just tested with the latest stable version on Windows

Please follow these steps:

1. Clear the check of "Quickconnect bar" under menu "View"
2. We can see the quickconnect bar was hidden
3. Click on menu "Edit" -> "Settings..." -> "Language"
4. Choose another language then click "OK"
5. The language changed but the "quickconnect bar" displayed and the check of "Quickconnect bar" under menu "View" still clear
6. If you click the "Quickconnect bar" under menu "View", you will see the "Quickconnect bar" display/hide is opposite with the check status

I think that here you should implement a way to manually enter which IP addresses should be considered as local connections. I have hosts from outside that are behind NAT and I am behind NAT too, so i will need to manually enter which IP's should be consider as local which should be consider as outside in order the passive mode to be correct for the external host and for the internal hosts. I have internal hosts that have IP's like 172.11 and etc that FileZilla interprets as external!???

I my case i have a 2 hosts that should be considered as external and only for them i will need the PASV mode - static IP to be set under: External server IP addresses for passive mode transfers: "Use the following IP (X.X.X.X)

I hope you understand my request.

I am seeing a problem where the client is not creating the initial remote directory. Example: I want to upload c:\foo to the remote location of /home/user/foo I select foo directory on the local end and user directory on the remote end. I then select add to queue of the local foo directory and then attempt to process the queue. The queue will timeout trying to upload the files as it does not create the initial /home/user/foo directory when it performs the first CWD /home/user/foo. Attached is a log of an actual attempt at this. If I manually create the /home/user/foo directory prior to processing the queue then the upload will work fine and subdirectories will also be processed ok.

I am also using the latest rc1 candidate

Just updated my version and now there is no status view so I have no idea what the progress is of my files I am transferring. Help.

Started FileZilla and was auto-upgraded to v3.3.5. Invoked about 300+ file transfer in passive mode from FZ on Win7 Ultimate 64bit. Several transfers failed, some smaller files <100K and larger files about 16MB with the subject error message.

This left partially uploaded file in DESTINATION folder. HOWEVER, the filesize was incorrect due to incomplete file transfer.... AND.... the file transfer was NOT SHOWN as an ERROR in the FZ GUI... I would have expected this.

I searched known bugs and understand ECONNRESET due to external network issues, however FZ should not show failed FTP as SUCCESSFUL.

I tried recreating in DEBUG 3 mode... however I was unable to reproduce the problem. I suspect the DEBUG setting slows down the condition that creates the problem... or no network issues (which seems strange to resolve in same timeframe since it was occurring for over 5-10 minutes). I did receive "Connection closed by server" with unexpected reply from server... suspect network issues... but again, NO FAILED TRANSFERS shown... ???

No matter what the size of the jpg is, when I upload to my website via filezilla, and no matter what option I choose in the box that pops up, Filezilla reduces the size of the jpg to 4380 bytes consistently every time, no matter what the original size was, and then renders the photo un-useable in the website. To troubleshoot, I uploaded the 4380 size photo that's been altered by filezilla, back to my computer's folder, and the picture is corrupted in my computer also. I never had this problem before, been using filezilla for years to upload photos to my website.

Downloading files from filezilla ftp server over FTPES, when I drag a file from the server file list to the client file list, if its replacing an old file, the file size is for the old file, not the one replacing it. This doesn't seem to always happen.

Both client and server are windows xp sp2.

During a backup transfer (server to client) of about 3181 files always the same jpg files wont be transferred, most likely because they include German umlauts and special characters like ü and ß.

But downloading each of these files directly without using the queue succeeds. So something is not working when using the queue.

Attached a screenshot showing some of the files.

FileZilla Version: 3.3.4

Immediately following the successful downloading of 3.3.5.1, I accept the instruction to install and I get "error 5: access is denied" and can proceed no further.

I can go to the downloaded .exe file and begin the install, but then I get "error opening file for writing..... /filezilla.exe

.... Abort-Retry-Ignore"

If I click "Ignore" the install proceeds and finally says the new version is installed.... "do I want to start Filezilla?" I click yes and nothing happens.

I re-launch Filezilla and 3.3.4.1 is still operating (satisfactorily), telling me that a newer version is available.

ABOUT: FileZilla Client

Version: 3.3.4.1 Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2010-08-16 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.11 GnuTLS: 2.8.3

Operating system:

Name: Windows Vista (build 6002, Service Pack 2) Version: 6.0 Platform: 32 bit system

Any ideas?

Regards, Bruce Lang

I'm connecting to a sftp service I've created.

the directory is empty but it should have some files in.

My config is the same than a previous one, except ACL.

here is the debug log, showing that filezilla receive a good response from the command ls :

Statut : Récupération du contenu du dossier... Trace : CSftpControlSocket::ParseSubcommandResult(0) Trace : CSftpControlSocket::ListSubcommandResult() Trace : CSftpControlSocket::SendNextCommand() Trace : CSftpControlSocket::ListSend() Commande : ls Statut : Listing directory /home/TAO/dmagniez Contenu : drwxrwx--T 9 root root 4096 Nov 22 14:37 .. Contenu : drwx------ 2 dmagniez utilisa. du domaine 4096 Nov 22 15:10 .ssh Contenu : drwxr-x--- 4 dmagniez utilisa. du domaine 4096 Nov 22 15:10 . Contenu : -rwxr-x--- 1 dmagniez utilisa. du domaine 0 Nov 22 14:57 Nouveau document texte.txt Contenu : drwxr-x--- 2 dmagniez utilisa. du domaine 4096 Nov 22 15:05 Nouveau dossier Trace : CSftpControlSocket::ListParseResponse() Trace : CSftpControlSocket::ResetOperation(0) Trace : CControlSocket::ResetOperation(0) Statut : Succès de la lecture du contenu du dossier

but nothing appear.

file right seems to be good : dmagniez@LINUXTAO:~> getfacl /home/TAO/dmagniez/ getfacl: Removing leading '/' from absolute path names # file: home/TAO/dmagniez/ # owner: dmagniez # group: utilisa.\040du\040domaine user::rwx user:other_user1:r-x group::--x group:g_ftp:--x mask::r-x other::--- default:user::rwx default:user:other_user1:r-x default:group::--x default:group:g_ftp:--x default:mask::r-x default:other::---

sftp command in localhost linux :

sftp> ls Nouveau document texte.txt Nouveau dossier

The inexistent folder "Feb 29 13:59 Giochi" is shown in the folder list of the remote FTP site instead of the existing one "Giochi". The error occurred for the first time in the last but one version of the filezilla client program. The only way for accessing it is to rename the inexistent folder into "Giochi". This folder contains 129 files and 47 folders. Other FTP programs (like Internet Explorer) shows and handles the folder normally.

Using the Filezilla client cannont get through remote site by ad-hoc networking from other PC sharing wi-fi connection. Though the password accepted, no content shows from the remote-site (App's right column)

But the Windows Explorer does! (proved not the error on network)

I tested this a few times and filezilla repeatedly uploads my files but with it's content duplicated...

SmartFTP did not give me this problem (so far...)

This may be because of the server I'm connecting to is not very good at all... and drops connections all the time, so filezilla takes about 5 or more tries to upload a file... but still the resulting content duplication is not good <_<

Certain directories on remote server appear to be locked (see attached log). Opened a ticket at the remote server and they forwarded it to FTP Voyager (the FTP server that they use). FTP Voyager people insisted that I purchase their client. Their client has no problem accessing the "locked" directories. By the way, the same directories are "locked" when using the FTP Commander client.

I'm able to upload to ftp sites, but when I try to download files from the same sites I receive:

Error: Failed to open "/file" for writing Error: File transfer failed

However, I'm able to use other ftp clients to upload and download to the same ftp sites. I can also successfully download the files on filezilla by using the "view/edit" option instead of the download option.

Any ideas how to fix this problem?

FileZilla client is set to preserve timestamps on transfered files.

File creation time is preserved on files smaller than 2G.

File creation time is set to current time on files larger than 2G.

FileZilla will not upload my files in Traditional Mandarin Chinese to Online Storate Solutions IICInternet. The files were written to Windows XP 2004 in MSWord and saved to my hard drive originally.

Trying to commect to your server to access files for transferring to our site.

We are getting the error: "ECONNREFUSED - Connection refused by server".

We have been using this software for a long time and never had this problem. It just started today.

I am using the latest version of the software.

We need an answer for this problem.

When I try to connect to my server, I get ERR_CONNECTION_RESET in Chromium Browser. How do I connect? I forwarded ports, and checked my config.

When I open up a connection to an AIX server and I wish to move files from one directory to another using the explorer window, I get a mv dir1/file1 dir2/file1 : fail No reason as to the failure. I use the same username and password that I used for the conenction to do an ssh on the same server that I did in Filezilla and issue the command from the command line. No problems and the files move from one location to another with no errors.

Version: Filezilla 3.3.5.1 2010-11-21 Compiled for: i686-apple-darwin9

Upload 2 files to a linux server: test.txt test.TXT

Try downloading these 2 files to your local linux server (which are connected to your mac as a volume)

Filezilla asks to overwrite one of the files! (that's strange, because the file does not exists!) If you say yes... it looks like filezilla downloaded both files, because they are both visible in the left panel and have the right filesize. But if you refresh the left panel, one of the files is suddenly not visible! (the file actually didn't exist in the first place!)

When I double-click (or choose "open") on a ".doc" file in Windows explorer, it opens in MS Word.

In Filezilla, if I choose "open" or "edit" on the same (local) file it opens Wordpad. Wordpad it the second application in my "open with..." menu.

The same happens with other extentions: source code which opens with notepad, etc.

FileZilla should use the default/first application associated with the "open" action.

Hi!

I've been using FileZilla for years now but lately I had to move to another FTP Client due to some issues I'm having.

FileZilla version: 3.3.5.1. Processor: AMD Phenom 8450 Triple-Core Processor 2.10 GHz RAM: 2GB System:Windows 7 Ultimate 32 bits.

When I upload individual or a group (queue) of files to my Server (auto, ascii or bin) no error message is shown but is very common they fail when I test the result of the uploading.

They shouldn't fail beacause those files belong to applications I've got them running in my local environment AND in another remote Server of my own. Investigating the reasons of these failures I found out that most of the uploaded files have different size in my Server than the size they've got in my local installation. Using another FTP Client (Core FTP LE) the same files were uploaded properly, no different in their sizes and no failure when testing my Server's installation.

Attached you will find the print screen of both upload operations (FileZilla's and CoreFTP's). This shows up only one case; it happens with almost all applications I've got (more than 100).

I've got another ticket opened 15 days ago (Ticket #6505) where I report another issue with FileZilla and I believe both issues may have some connection.

Both issues (this one and the one reported in ticket 6505) started to show up after I installed Windows 7 in my PC.

I love FileZilla and after so many years using it I'm more than used to its features but, unfortunately, now I had to move to another FTP Client because I need to continue working and those misbehaviours add delays to my work.... but I'd love to go back to FileZilla.

I will appreciate any help.

Best regards, Lautaro.

Hello:

I am trying to upload files to a "premium" yahoo ftp account with a low ping time. Quite often for reasonable file sizes (500k,1mb) the file uploaded ends up being only 90-95% of the actual source file size. This happens quite often. I see it upload more than the actual file size as well. The majority uploads immediately then the last bit takes much longer. When this happens, he file transfer does not indicate it failed ... usually.

FileZilla client 3.3.5.1

When I open the program, the title bar is too far into the mac os program bar, that none of the icons are visible in 16x16 mode, nor is the window able to be moved.

I downloaded client version 3.3.5.1 today and when I tried to view/edit a JPEG image on the site, I get a message stating "No program has been associated to edit files with the extension jpg." I have tried changing the extension of the file on the site to .jpeg and still get the same message. I checked the file assciations in the Filezilla client and the box "Inherit system filetype associations is checked. I tried rolling Filezilla client back to a previous version and continue to get the message even though the previous version used to open file types without issue.

We have several AIX servers running as FTP servers and using WU-FTPD, the same version of AIX and WU-FTP for all. We have clients connecting to our servers with Filezilla but the display for the filenames is off. The columns for the filename included the filename plus the filesize and the modified time so when they go to download they get message that the file doesn't exist. In some cases there are invalid characters in the name.

When using DOS command line there are no issues, everything shows correctly so I know it is an issue with the display of host type or character set or something. I have seen similar issues on the forum but have not found a solution. I have tried changing the host type and forcing the UTF-8 character display but nothing has worked.

Is there a fix for this or a parser that can be run to display the columns properly?