Custom Query (8171 matches)

Using FileZilla 2.2.24a on Win2000 Pro fully patched.

Here's the log (edited for privacy):

Status: Connecting to <site>.com ... Status: Connected with <site>.com. Waiting for welcome message... Response: 220 Serv-U FTP Server v5.0 for WinSock ready... Command: USER <username> Response: 331 User name okay, need password. Command: PASS Response: 230 User logged in, proceed. Command: SYST Response: 215 UNIX Type: L8 Command: FEAT Response: 211-Extension supported Response: CLNT Response: MDTM Response: MDTM YYYYMMDDHHMMSS[+-TZ];filename Response: SIZE Response: SITE PSWD;EXEC;SET;INDEX;ZONE;CHMOD;MSG Response: REST STREAM Response: XCRC filename;start;end Response: 211 End Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current directory. Command: TYPE A Response: 200 Type set to A. Command: PASV Response: 227 Entering Passive Mode (192,168,x,x,x,x) Command: LIST Error: Transfer channel can't be opened. Reason: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. Error: Could not retrieve directory listing ...

Got the same error with an older version. But it works fine with FTP Expert v.3...

Cant save long passwords 17 chars in the Site Managern

• Uninstall FileZilla Server 0.9.17
• reboot
• Install FileZilla Server 0.9.18

Now my clients cannot log in.

The solution is to set the passwords in FileZilla Interface on the server to the passwords to what they have been up until now.

My conclusion is that the uninstall/upgrade from 0.9.17 to 0.9.18 lost or scrambled the server's copies of passwords.

Hello, I have been instructed by the developer from "2brightsparks" (the SyncBackSE backup tool developers) to contact you about this issue.

What is going on is that when I activate the "Use implicit connection (port 990)" in SyncBackSE I get an error message like this on the client (SyncBackSE) side:

"Connect failed: SSL/TSL (18):.Please check your FTP settings and network connection"

And on the server side on the console I see the following:

(000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> Connected, sending welcome message... (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> 220-FileZilla Server version 0.9.18 beta (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> 220-written by Tim Kosse (Tim.Kosse@…) (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> 220 Please visit ​http://sourceforge.net/projects/filezilla/ (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> €L (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> 500 Syntax error, command unrecognized. (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> 3 (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> 500 Syntax error, command unrecognized. (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> 500 Syntax error, command unrecognized. (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> 500 Syntax error, command unrecognized. (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> 500 Syntax error, command unrecognized. (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> 500 Syntax error, command unrecognized. (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> € (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> 500 Syntax error, command unrecognized. (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> À (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> 500 Syntax error, command unrecognized. (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> € (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> 500 Syntax error, command unrecognized. (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> 500 Syntax error, command unrecognized. (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> @ (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> 500 Syntax error, command unrecognized. (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> d (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> 500 Syntax error, command unrecognized. (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> b (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> 500 Syntax error, command unrecognized. (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> 500 Syntax error, command unrecognized. (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> 500 Syntax error, command unrecognized. (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> € (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> 500 Syntax error, command unrecognized. (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> € (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> 500 Syntax error, command unrecognized. (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> 500 Syntax error, command unrecognized. (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> 500 Syntax error, command unrecognized. (000002) 5/31/2006 7:50:13 AM - (not logged in) (192.168.1.100)> disconnected.

The SyncBackSE developer, Michael J. Leaver, looked at the above report and he replied the following:

"With 0.9.16c beta I could not reproduce this issue, but on newer versions of Filezilla it does fail. ... Please contact Filezilla support to get the issue resolved."

That is why I am filing this bug report.

Thank you, Silvian

The list(s) of directories shown in the local site treeview are no longer sorted into alphanumerical order. This works fine in 2.2.15 but was broken by 2.2.18 and is still broken in the latest version 2.2.23. The filename list below works fine in all versions as does (in my experience) the remote tree view - it is ONLY the local treeview that is affected.

This makes navigating through local directories/servers with a large number of subdirectories extremely tedious (in fact, I downgraded back to 2.2.15 because I found it so annoying!)

Cheers!

Under Windows 98SE : version 2.2.23 or newer FileZilla

client are not functionnal.

A popup with Runtime Error! is displayed.

With 2.2.22 or older versions : no problem.

I use syncbackSE to synchronize files. With version 0.9.18 server, it now seems to be mis-reporting the timezone, since the reported filetimes are off by -7hrs. Thanks!

If there is unexpected text in a unix login session, filezilla gets confused and gets stuck. The work around I used was to remove the confusing text from the unix login. This took 5 hours to figure out. Preferably, filezilla should not get confused by unexpected unix login information. Other products do not have this problems.

in FileZilla Server 0.9.15 and later, if the name of a file/dir contains non-English chars (in my case, Simplified Chinese encoded in GBK using Windows XP CodePage 936), these chars become question marks "?".

This problem was not found in 0.9.12c (maybe 0.9.14 will work too) and earlier versions.

Which ports does FileZilla Client use ?

I use FileZilla_Server-0.9.11

IP Sharing Device open and port mappgin TCP 21,20, UDP 21,20

On Windows XP:

FileZilla Client 2.2.22 FileZilla Client 2.2.24a login OK, "list directories and files" failed

FTP on "Command Prompt of Windows XP" Everything OK !

LeechFTP 1.3 Build 207 ​http://stud.fh- heilbronn.de/~jdebis/leechftp/downloads.html Everything OK !

FTPX 1.00 ​http://www.ftpx.com/ Everything OK !

IP Sharing Device open DMZ

FileZilla Client 2.2.22 FileZilla Client 2.2.24a Everything OK !

Does FileZilla Client use more ports than TCP 20,21, UDP port 20,21 ?

How to use ports aboud FileZilla Client ?

I check "Remember window size and position"

Save Window size and position but layout can't save.

Transfer Queue size 90% everytime.

I have a reocuring minor problem with uploading large batches of pdf docs

when I try to upload more than 20 pdf docs 2 - 4 mb in size I get a popup error mesage saying that their is a error in the transfer quie and if I can reproduce it report it and the upload then stops

This error has reocured on numerous occasions when uploading pdf docs and I can reproduce

it does not happen with other formats with similar file size jpg html php etc I have found that if I upload 10 pdf docs at a time their is no problem and the transfer list is procesed quite quickly

my os is windows xp pro and my web server is apache

Many thanks Jura

The german translation of the term 'site' is inconsistent and misleading.

In the current version "site" is translated using the words "Server" (which is obviously not the same as site) and "Seite" (Seite is the german word for page!)

Somebody may construct some word like "FTP-Präsenz". But this word is not in use, it sounds ugly untechnical, and it is longer and more complicated than "Site".

Since there seems to be no german word for the term site in this context, I suggest to use the word "Site", which is frequently used by german-speaking people.

references:

​http://de.wikipedia.org/wiki/Webseite "Der Begriff Webseite wird fälschlicherweise oft wegen der großen klanglichen Ähnlichkeit zum englischen Begriff Website ... benutzt"

​http://sourceforge.net/tracker/index.php?func=detail&aid=1305751&group_id=21558&atid=372243 old patch

FileZilla Version 2.2.x Client kills D-Link DSL-584T during usage. No Protocol works after the kill. The route have to been reseted, to work again.

With other FTP-Clients there are no problems. Switching beetween passive / active mode make no differences. FileZilla kills the router after one file is transfrered.

Any Idea? Any Setting? Any suggestion about the D-Link DSL-584T

Regards

Michael Keck

hi,

i use filezilla 2.2.24b and filezilla server 0.9.18, i have error during file transfert, the error is :

Data connection SSL warning: SSL3 alert write: fatal: bad record mac Data connection SSL warning: error:1408F455:SSL routines:SSL3_GET_RECORD:decryption failed or bad

can you tell me a solution to repair this error?

thanx,

Ben62

When selecting a file with a long name (either in the local panel or remote panel) only a portion of the file name will be highlighted. Additionally, it will truncate the name to 5 characters plus "..." (this is the part that highlights) however any additional characters in the file name past this will still be visible.

See attached image.

This may be a bug with Microsoft Windows Vista, however I felt it prudent to file a bug here just in case. I have filed a bug report with Microsoft as well.

The title says it all, trying to delete a lot of files (750+) takes a long time - possibly because the remote file list view is emptied and refilled for each file. The time to delete each file decreases as the number of files decreases.

If you start transferring a lot of files and then resize the message log window, the files currently being transferred return an error (I've got 8 simulatenous ports open). Once these files have reported their error, operation continues as normal.

Selected a few directories and a few files on a remote system. Drag'n'dropped these on to a folder icon on the local system file list. The files selected went into the directory - correct. But the directories were copied into the same level as the destination directory.

Example....

Files selected on remote file list: DirA DirB FileA FileB

Driectory on local machine C:\Download

Dir1 <--- drop files here Dir2 File1 File2

You end up with

Dir1

FileA FileB

Dir2 DirA DirB

I would expect

Dir1

DirA DirB FileA FileB

Dir2 File1 File2

Hello there,

Cool to see this feature buildin that quick :).

There only is an litle buggy. When i select an directorie, want to change the attributes of the files only. It changes them for those folders also.

I am using 2.2.16 on windows xp. When I upload files I somtimes find that the content of the files is being swapped around. So file a contents end up in file b

When typing an URL in the Quick Connect Address box with username only, FileZilla pops up a dialog box for password but uses it as username.

e.q. ​ftp://someuser@somehost/ is given in the Address box. While FileZilla asks for password, "somepass" is given. In this case, FileZilla connects to "somehost" with username "somepass" and empty password.

I was trying to download a folder from a Windows server today, and every time I tried, FileZilla would get in some weird loop and fail to download the files/folders.

The folder I was trying to download has 439 files, 65

folders, with a total of 178 MB of data.

I was able to reproduce this problem using both Microsoft's IIS FTP Server and FileZilla Server, so the problem is definitely with the FileZilla client.

I will attach logs from both the FileZilla client and the FileZilla server.

I'm getting this:

Command: LIST Response: 150 Connecting to port 5024 Response: 226-Options: -a -l Response: 226 Output truncated to 6000 matches Status: Directory listing successful

So filezilla seems to think it shows full directory listing while server truncated it to 6000 entries

server is Pure-FTPd - not sure which version, but probably one of latest

filezilla client is 2.2.24b

Hi

during the upload, the filenames gets changed from lower case to upper case. can't it keep the filenames case as they are.

e.g if i have a file name called picture.jpg when I upload to a server, it gets changed to PICTURE.JPG. can it keep it in its original case i.e picture.jpg ?

My virus scanner, Norton, detected a trojan in the FileZilla Client.

All current filezilla exe-files are infected with Trojan.Zlob.B

When I select several files on the local Site list (bottom) and move them to a folder on the same list, one of the file does not get moved - see attached screenshots that illustrate what i'm saying

Thanks,

Luis Jeremias

When downloading a large file ( over 2 gigs ) the download never finishes. It continues downloading indefinitely.

Possibly due to a 32bit signed integer usage instead of a 64bit unsigned int??

Occurs on all versions of FileZilla clients, last tested with 2.2.25

In the last couple versions of FileZilla, the Default local directory stopped working as expected for one of my projects.

I've been able to reproduce the condition in version 2.2.25 with the following example:

Steps to Reproduce

1) On an existing FTP site, set the Default local directory to (without quotes): "C:\Projects\eclipse\FauxWeb\workspace\Faux Web Site"

2) Save & Exit the site manager.

3) Initiate a session with the modified FTP site.

Resulting Behavior

FileZilla does not change the location of the left-hand pane to the saved default local directory path.

Expected Behavior

FileZilla opens the specified local directory in the left-hand pane.

Additional Information

If I set the default local directory to (without quotes): "C:\Projects\eclipse\FauxWeb\workspace", FileZilla works as expected. It appears to be the addition of the "Faux Web Site" on the end of the path that triggers the problematic behavior.

System Info

Windows XP SP2, NTFS

When connecting to a SSH server (Windows 2003 with Vandyke VShell SSH) by SFTP using SSH2, the filenames containing "special characters" are displayed incorrectly in the remote window AND cannot be transfered (transfer error).

file name on server: dùçàèéóòöüïëê.txt displayed name on remote site: dùçàèéóòöüïëê.txt

Uploading of a file containg special characters is not possible. The file above is transfered on the server and receives the name "d" on the server.

The contents of the file (also containing special characters) is transfered correctly.

Setting "use UTF-8 on server if avaible" from auto to force and to never does NOT solve the problem.

Please note, the tool "winscp" displays the remote files correctly (handles the special characters correctly), so this is not a server issue.

Kind regards.

When I start Filezilla Client and use CTRL-R to resume the last connection, the timestamp adjustment specified in the advanced settings for each site is ignored.

This only occurs when resuming the connection from a previous run and not when resuming the connection from the current run. This bug was present in older versions.

Thanks,

Steven

Environmental information:

• One of our passwords contains a Euro character (€).
• The tested connection type is FTP over SSH2
• We use the .xml config file

In version 2.2.22, it worked fine. Since we updated to version 2.2.25, the password isn't accepted anymore.

When does the error happens? The error always happens when we try to open the one connection.

When does the error NOT happens? I can setup my connection properties, reenter the password there and click on "connect", then the server accepts my password. (But if I press "Save" and then connect again, it doesn't work, too.)

FileZilla Client Fails to Upload Directories From UNC Paths FileZilla Client fails to upload complete directories from UNC paths.

Steps to repoduce:

• Connect to remote site
• Open local UNC-based share (eg.
  somecomputer\someshare)
• Drop a folder from said local UNC-based share into

the remote site's pane

side note:

• files work

There are old bug reports of this: 708993 1343247 1445156

I wanted to switch from XML-file to the registry so I exported my settings, uninstalled Filezilla, reinstalled and selected use registry (force).

The problem is that now when I want to import my old settings into the registry nothing seems to happen. I use the import settings tool and select my old xml-file but I can't get my sites back.

On a closer look, it appears that my sites wasn't even saved when I exported my settings. That really should have been the case.

And by the way, using config files does not exclude multi-user. Just save the users config files in their application data folder.

The characters åäö (latin1/sv_SE) isn't displayed correctly using Flashfxp (and I bet many other clients aswell).

They are displayed correctly using the FileZilla Client thought.

Flashfxp is a client many people use, and for that reason I think it should be supported by the FileZilla Server to display non-US characters correctly. Even the ones that doesn't support RFC 2640.

Keep up the good work! :-)

In Settings->Miscellanous checkbox "Allow downloading files witch are open for writing by..." doesn't work. Sometimes it checked and sometimes not. I check it and just click OK, and then I load settings again sometimes it checked and sometimes not.

Exception report created by FileZilla Server version 0.9.12 beta ===================================================

System details:

Operating System: Microsoft Windows XP Professional Service Pack 2 (Build 2600) Processor Information: Vendor: GenuineIntel ,Speed: 2666MHz ,Type: Intel Pentium compatible,Number Of Processors: 1 ,Architecture: Intel ,Level: Unknown 15 ,Stepping: 10-25 Memory Information: Memory Used 32%, Total Physical Memory 916720KB, Physical Memory Available 618988KB, Total Virtual Memory 2097024KB, Available Virtual Memory 2065492KB, Working Set Min : 200KB Max : 1380KB .

Exception Details:

Exception code: C0000005 ACCESS_VIOLATION Fault address: 00409810 01:00008810 d:\Program Files\FileZilla Server\FileZilla Server.exe

Call stack:

Address Frame Function SourceFile 00409810 77D18C1A 0001:00008810 d:\Program Files\FileZilla Server\FileZilla Server.exe 0300BA00 0011C5B8

using:

2.9.4 Nightly Build: 2006.08.01 i589 mingw32msvc-gcc (Gcc)3.4.5 (mingw special) -g -O2 -Wall -g -fexceptions

bug:

Check for update (nightly builds)returns:

A newer version of FileZilla is available: 2006-08-28 Nightly

note: today is 2006-08-01

I kept getting a Critical Transfer Error in FileZilla while uploading to SourceForge. It turns out that the server was prompting me to switch to PASSIVE mode; when I did that, the problem went away. It works fine now.

Is it possible for "Critical Transfer Error" to suggest Passive Mode as a possible solution?

Thank you.

I know, there are a lot of bugreports concerning difficulties with countryspecific characters (for example ÄÖÜ) in various contexts. May I draw your attention to the fact, that in the FileZilla-Client these characters do not work in passwords as well.

Users are accustomed to use such characters in passwords, because they are able to use them - for example with Servers as Serv-U and clients like CuteFTP and FTP-Voyager.

Much to my regret this is a reason, why FileZilla at the present time cannot be recommendet as alternative to these clients. Perhaps you can set the bug on the list.

Thanks Herby

From the GUI interface, FileFilla will not upload to a directory it can't "list".

You can "cd" to that directory and get a "current directory is" returned but if a "list" is denied and you subsequently "doublelick" on a file to upload, FileFilla arbitrarily disconnects and starts over which (of course) negates the previous "cd" command. See below.

Thanks ~ Directory listing successful Status: Retrieving directory listing... Command: CWD /incoming/ Response: 250 CWD command successful. Command: PWD Response: 257 "/incoming" is current directory Command: TYPE A Response: 200 Type set to A Command: PASV Response: 227 Entering Passive Mode (64,102,255,95,221,148) Command: LIST Response: 550 /incoming/: Permission denied Error: Could not retrieve directory listing * doubleclicked to upload here * Status: Connecting to ftp.cisco.com ... Status: Connected with ftp.cisco.com. Waiting for welcome message... Response: 220- <}======[+]> FTP.CISCO.COM <[+]======={> Response: 220- Response: 220- Welcome to the Cisco Systems FTP server. Response: 220- Response: 220- Local time is Tue Aug 08 16:45:01 2006. Response: 220- Response: 220- This server has a number of restrictions. If you are not familiar Response: 220- with these, please first get and read the /README or /README.TXT file. Response: 220- Response: 220- If you have any odd problems, try logging in with a minus sign (-) as Response: 220- the first character of your password. This will turn off a feature that Response: 220- may be confusing your ftp client program. Response: 220- Response: 220- Please send any questions, comments, or problem reports about this Response: 220- server to cco-team@…. Response: 220- Response: 220- NOTE: Response: 220- o To upload or download files from ftp.cisco.com, you must be running a *passive-mode* Response: 220- capable FTP client. Response: 220- Response: 220- o To upload files on this system, you must cd to the /incoming directory. Response: 220- Uploads are available on ftp-sj.cisco.com only. Response: 220- Response: 220- Cisco.com | | Cisco Systems, Inc.

Response: 220- Phone: +1.800.553.2447

Response: 220- Response: 220- You may login with: Response: 220- + Your Cisco.com username and password, or Response: 220- + "anonymous" followed by your e-mail address for guest access. Response: 220 ftp-rtp-2.cisco.com FTP Server (Apache Oct 31 2005 17:05:18) ready. Command: USER anonymous Response: 331 Guest login ok, type your email address as the password Command: PASS * Response: 230 User anonymous logged in Command: SYST Response: 215 UNIX Type Command: FEAT Response: 211-Extensions supported: Response: AUTH TLS Response: PBSZ Response: PROT Response: SIZE Response: MDTM Response: 211 END Status: Connected Status: Starting upload of C:\Program Files\Syslogd\Logs\EPL 603463359Debugs2.txt Command: PWD Response: 257 "/" is current directory Command: TYPE A Response: 200 Type set to A Command: PASV Response: 227 Entering Passive Mode (64,102,255,95,193,221) Command: STOR EPL 603463359Debugs2.txt Response: 550 Permission denied: STOR not allowed here Error: Upload failed Status: Retrieving directory listing... Command: CWD / Response: 250 CWD command successful. Command: PWD Response: 257 "/" is current directory Command: TYPE A Response: 200 Type set to A Command: PASV Response: 227 Entering Passive Mode (64,102,255,95,221,149) Command: LIST Response: 150 Opening ASCII mode data connection for file list Response: 226 Transfer complete. Status: Directory listing successful Command: REST 0

We are having trouble connecting to some servers and have traced the problem back to the code.

A bug that was fixed in the latest version of PuTTY has not been propagated to the latest version of the 2.2.x branch of FileZilla.

Specifically, when filezilla connects, some servers send a window adjust (SSH2_MSG_CHANNEL_WINDOW_ADJUST) to allow the client to send data after creating the session. FileZilla then fails to trigger the send data functionality and thus hangs. The method in question is in SSH.C:

static void ssh2_msg_channel_window_adjust(Ssh ssh, struct Packet *pktin) {

unsigned i = ssh_pkt_getuint32(pktin); struct ssh_channel *c; c = find234(ssh->channels, &i, ssh_channelfind); if (c && !c->closes) {

c->v.v2.remwindow += ssh_pkt_getuint32(pktin);

ssh2_try_send_and_unthrottle(c);

}

}

The line with the > does not exist in FileZilla, but does exist in the latest PuTTY. In addition, they added the body of that method:

static void ssh2_try_send_and_unthrottle(struct ssh_channel *c) {

int bufsize; if (c->closes)

return; /* don't send on

closing channels */

bufsize = ssh2_try_send(c); if (bufsize == 0) {

switch (c->type) {

case CHAN_MAINSESSION:

/* stdin need not receive an unthrottle

• notification since it will be polled */

break;

case CHAN_X11:

x11_unthrottle(c->u.x11.s); break;

case CHAN_AGENT:

/* agent sockets are request/response and

need no

• buffer management */

break;

case CHAN_SOCKDATA:

pfd_unthrottle(c->u.pfd.s); break;

}

}

}

Can you update FileZilla with this part of the laetst PuTTY code (or all the latest changes, if possible, the latest PuTTY works great on all servers)?

Thanks! James

This is very serious!

The contents of files are getting mixed up. I have downloaded my web site several times and the contents of some of the files are interchanged. They are files that are near each other in the directory, so they were probably downloaded close to each other.

I have erased the directory on my PC and re-downloaded the files several times and it appears to be different files each time.

Some History: I previously had an older version of Filezilla (can't remember which one, but about 6 months old) and upgraded to 2.2.26a yesterday. That is when the problem started.

Thanks for looking into this ... Paul

When setting a directory's sticky bit, I think the wrong command is sent to the server.

Reproduce steps:

Right-click a directory on the remote site, choose "File attributes...", enter 1777 as the numeric value, click OK. The remote site in my case is some Linux box (I don't have more details here, I'm sorry).

The message log now shows:

Command: SITE CHMOD 49777 /public/sites/www.someserver.nl/aaa Trace: FtpControlSocket.cpp(823): OnReceive(0) OpMode=8192 OpState=-1 caller=0x010819b4 Response: 200 SITE CHMOD command ok. Trace: FtpControlSocket.cpp(3988): ResetOperation(1) OpMode=8192 OpState=-1 caller=0x010819b4 Trace: FtpControlSocket.cpp(1213): List(FALSE,0,"/public/sites/www.someserver.nl/","",0) OpMode=0 OpState=-1 caller=0x010819b4 Status: Retrieving directory listing... Command: TYPE A Trace: FtpControlSocket.cpp(823): OnReceive(0) OpMode=4 OpState=8 caller=0x010819b4 Response: 200 Switching to ASCII mode. Trace: FtpControlSocket.cpp(1213): List(FALSE,0,"","",0) OpMode=4 OpState=8 caller=0x010819b4 Command: PASV Trace: FtpControlSocket.cpp(823): OnReceive(0) OpMode=4 OpState=7 caller=0x010819b4 Response: 227 Entering Passive Mode (81,4,97,176,245,244) Trace: FtpControlSocket.cpp(1213): List(FALSE,0,"","",0) OpMode=4 OpState=7 caller=0x010819b4 Trace: TransferSocket.cpp(540): SetActive() caller=0x01162b2c Command: LIST -a Trace: TransferSocket.cpp(428): OnConnect(0) caller=0x01162b2c Trace: FtpControlSocket.cpp(823): OnReceive(0) OpMode=4 OpState=9 caller=0x010819b4 Response: 150 Here comes the directory listing. Trace: FtpControlSocket.cpp(1213): List(FALSE,0,"","",0) OpMode=4 OpState=9 caller=0x010819b4 Trace: TransferSocket.cpp(500): OnClose(0) caller=0x01162b2c Trace: TransferSocket.cpp(1107): Close() caller=0x01162b2c Trace: TransferSocket.cpp(1107): Close() caller=0x01162b2c Trace: FtpControlSocket.cpp(1969): TransferEnd(4) OpMode=4 OpState=10 caller=0x010819b4 Trace: FtpControlSocket.cpp(1213): List(TRUE,0,"","",0)

OpMode=4 OpState=10 caller=0x010819b4

Trace: drwxr-xr-x 9 48171 48258 624 Aug 14 16:38 . Trace: drwxr-xr-x 3 48171 48258 88 Apr 20 12:40 .. Trace: -rw-r--r-- 1 48171 48258 1348 Aug 14 16:37 CContact.php Trace: -rw-r--r-- 1 48171 48258 693 Aug 14 16:37 CCounter.php Trace: -rw-r--r-- 1 48171 48258 936 Aug 14 16:37 CDatabase.php Trace: -rw-r--r-- 1 48171 48258 15106 Aug 14 16:37 CGallery.php Trace: -rw-r--r-- 1 48171 48258 6914 Aug 14 16:37 CGuestbook.php Trace: -rw-r--r-- 1 48171 48258 353 Aug 14 16:37 CLinks.php Trace: -rw-r--r-- 1 48171 48258 4082 Aug 14 16:37 CMovieGallery.php Trace: -rw-r--r-- 1 48171 48258 4594 Aug 14 16:37 CNews.php Trace: -rw-r--r-- 1 48171 48258 763 Aug 14 16:37 CUtils.php Trace: d------r-- 2 48171 48258 48 Aug 14 16:38 aaa Trace: drwxr-xr-t 3 48171 48258 104 Aug 14 16:03 archive Trace: drwxr-xr-x 2 48171 48258 80 Aug 12 12:03 css Trace: drwxr-xr-x 2 48171 48258 344 Aug 12 12:10 img Trace: -rw-r--r-- 1 48171 48258 3653 Aug 14 16:37 index.php Trace: drwxr-xr-x 2 48171 48258 72 Aug 05 09:44 js Trace: drwxr-xr-x 2 48171 48258 72 Aug 12 13:38 movie_archive Trace: drwxr-xr-x 13 48171 48258 344 Aug 14 16:28 photo_archive Trace: -rw-r--r-- 1 48171 48258 176 Aug 14 16:37 phpinfo.php Trace: -rw-r--r-- 1 48171 48258 1149 Aug 14 16:37 watermark.php Trace: TransferSocket.cpp(96): ~CTransferSocket() caller=0x01162b2c Trace: TransferSocket.cpp(1107): Close() caller=0x01162b2c Trace: FtpControlSocket.cpp(823): OnReceive(0) OpMode=4 OpState=10 caller=0x010819b4 Response: 226 Directory send OK. Trace: FtpControlSocket.cpp(1213): List(FALSE,0,"","",0) OpMode=4 OpState=10 caller=0x010819b4 Status: Directory listing successful Trace: FtpControlSocket.cpp(3988): ResetOperation(1) OpMode=4 OpState=10 caller=0x010819b4

Note the command on the first line in the message log, it states: "SITE CHMOD 49777 /public/sites/www.someserver.nl/aaa", while I think it should be "SITE CHMOD 1777 /public/sites/www.someserver.nl/aaa".

Note that I replaced my actual server with "someserver".

Kind regards,

Pascal

If debug tracing is enabled and you connect to a GSS enabled server, the client crashes with a C++ Library Runtime error. Does not crash if using SFTP or non- GSS FTP (domain not listed in GSS enabled servers). Crashes whether or not you have Kerberos tickets. Last line in debug logs is the server's 220 ready message:

FileZilla started (08/15/2006 13:40:38) Status: Connecting to [hostname deleted] ... Trace: ControlSocket.cpp(185): m_pGssLayer changed state from 0 to 1 caller=0x003fbed4 Trace: ControlSocket.cpp(185): m_pGssLayer changed state from 1 to 2 caller=0x003fbed4 Trace: ControlSocket.cpp(185): m_pGssLayer changed state from 2 to 4 caller=0x003fbed4 Trace: FtpControlSocket.cpp(1001): OnConnect(0) OpMode=1 OpState=-2 caller=0x003fbed4 Status: Connected with [hostname deleted] Waiting for welcome message... Trace: FtpControlSocket.cpp(823): OnReceive(0) OpMode=1 OpState=-2 caller=0x003fbed4 Response: 220 [hostname deleted] FTP server (Version 5.60) ready.

FTP server is on AIX platform, where language is set to slovenian. If file is created in august, it doesn't appear in filezilla remote file window. If I "touch -t" file date to july or september, then I can see it in filezilla remote window.

I have enabled debuging and I can see files listed in trace: Trace: -rwxrwx--- 1 irc PowerH 9 31 jan 2002 1.txt Trace: -rwxrwx--- 1 irc PowerH 9 16 avg 14:53 2.txt

But file 2.txt doesn't appear in remote file list window.

There are problems with parsing months like "avg".

Same problem on hp-ux with slovenian language, when file or directory is created in august (avg).

Other slovenian abbreviates are: jan, feb, mar,apr, maj, jun, jul, avg, sep, okt, nov, dec

Filezilla is the latest (tested with older versions too).

After login into a server I have to change the internal server by writing for example metusalix/tmp into the "Remote Site:" drop down list. This is equal to the ftp command "cwd metusalix/tmp".

But FileZilla is throwing away the second / and so the command fails. This is what Filezilla is writing into the log when I'm typing "metusalix/" into the "Remote Site:" drop down list and hitting enter:

Command: CWD /metusalix/ Response: 550 Invalid Path Error: Could not retrieve directory listing

but it should be

Command: CWD metusalix/

instead.

Filezilla version: 2.2.25

When attempting to upload a file to a folder where the user doesn't have write permissions, the FileZilla GUI is caught in a confusing loop. It displays a "File Already Exists" dialog asking the user whether or not they want to "Overwrite", "Overwrite If Newer", "Resume", "Rename", or "Skip". None of this is accurate, since the real problem is that the user has no permission to upload/write the file. If you click "OK" in the dialog and the default of "Overwrite" is selected, the dialog simply returns an additional 2 times and then it appears as if the file was uploaded, but a "Refresh Views" will then show that the file was not uploaded. The only place that the user will see a "permission denied" is in the message log. This is all very confusing. If a user is being prevented from upload a file due to permission denied, shouldn't the GUI just present a dialog that states that?

When transferring files larger than 10MB to a PureFTPD server (Version 1.0.20-7 running on Suse Linux 10.0)upload is successful (according to logs) But the file length is zero bytes. This appears to happen less often with smaller files, but almost always with files of 100MB or more. The newest version seems to do it more than older versions. It will resume properly if interrupted, but is just as likely to create zero length files. I am including the entire log file generated during these transfers.

I haven't found another client which does the same

thing. If needed, I can provide a network packet capture or try it again with various settings if it will help. This problem seems to occur whether active or passive, and through two different firewalls (Symantec Enterprise and Smoothwall) or through no firewall.

In the "Comments" field of the Site Manager:

If a comment exists and you want to add text and end a line in the midst of the existing comment, how do you end the line?

Pressing "return" will fail. (It will instead connect you to the site.)

There seems to be no way to end the line.

EXAMPLE:

Existing text:

This is a sample of an existing comment. This is the last line of the comment.

Desired text:

This is a sample of an existing comment. You would like to add this line. This is the last line of the comment.

PROBLEM: You cannot add the end-of-line for that middle line.

on ftp client (Mac OS X 10.3.9) on local network, issued command "mget *" (directory contained about 20 files), the server responded ... (000006) 02/09/2006 15:27:25 - andy (192.168.0.53)> 229

(000006) 02/09/2006 15:28:40 - andy (192.168.0.53)> EPRT |1|192.168.0.53|49243| (000006) 02/09/2006 15:28:40 - andy (192.168.0.53)> 200 Port command successful i.e. 75 seconds before anything happened appparently! Even then, nothing appeared on the client and I went off to do something else and the session had timed out before I came back. This wait could be improved.

Dear FileZilla Author,

The download for each build lists an MD5 file. That's great for people working with all the package files offered, except the installer. A typical home user doesn't need the MD5 file, because the installer will verify itself at the start of the installation. However, people with file library's would want the MD5 for the installer, to make sure what they're hosting isn't corrupt. I know this to be true with Inno Setup.

Can someone who knows a thing or two about the

NullSoft install system respond whether or not my assumption is also true with NSIS, the installer FileZilla employs? If that's the case then it'd be great if you ended every release notes with "Note: The MD5 file is not necessary if you are using the installer, because it'll verify itself at startup."

Thanks, Christian

Connecting to Globalscape ftp server running on Windows 2000 Advanced Server is causing the ISP server to crash, resulting in a server reboot. (Filezilla version 2.2.26a). Thought the server was at fault but after uploading from CuteFTPpro, on a diferant laptop - I had no issues.

I test file download and file upload. There is a modification like follow. I found that modification occurs in download time.

ftp server : vsftpd-1.2.1-3E.1, CentOS 3.6

Kernel version : Linux version 2.4.21-

37.ELsmp ftp client : WinXP, FileZilla 2.2.27

There is no modification when I use WinXP ftp(console client) and Alftp.

The follow is result of my test.

[root@]#xxd ../ce.org > ../ce.xxd [root@]#xxd ce.org > ce.xxd [root@]# diff ce.xxd ../ce.xxd

(downloaded file) (orgfile)

86009c86009 < 014ff80: 5cba 3a54 f9c1 6aa1 a472 c9b8 72d9 2994 \.:T..j..r..r.). ---

014ff80: 5cba 3a54 e512 afe1 a472 c9b8 72d9 2994

\.:T.....r..r.). 975097c975097 < 0ee0f80: 5eec b17c ce96 6fad 8cde a2b6 6e5e 47d3 ^..|..o.....nG. ---

0ee0f80: 5eec b17c 9e13 6361 8cde a2b6 6e5e 47d3

^..|..ca....nG. 2262265c2262265 < 2284f80: 0b66 332e b941 651e 1d1d 83d8 82bc e8e7 .f3..Ae......... ---

2284f80: 0b66 332e 778d 846c 1d1d 83d8 82bc

e8e7 .f3.w..l........ 2283001c2283001 < 22d5f80: fce5 fcc1 af3b e453 4ccd de4b 9626 565d .....;.SL..K.&V] ---

22d5f80: fce5 fcc1 bdfc 12ae 4ccd de4b 9626

565d ........L..K.&V] 2625529c2625529 < 280ff80: ac6b 3913 a7b8 b17a 0ea3 e57c dd07 8ad1 .k9....z...|.... ---

280ff80: ac6b 3913 2976 f331 0ea3 e57c dd07

8ad1 .k9.)v.1...|.... 3548561c3548561 < 3625900: 1ee9 4c59 c3eb c905 2dd5 2245 0ddf 4747 ..LY....-."E..GG ---

3625900: 1ee9 4c59 6c72 5701 2dd5 2245 0ddf

4747 ..LYlrW.-."E..GG 3560185c3560185 < 3652f80: 0958 16f6 41a7 a007 e493 d169 8550 1f7d .X..A......i.P.} ---

3652f80: 0958 16f6 4a46 6d90 e493 d169 8550

1f7d .X..JFm....i.P.}

FileZilla project forum bug. ​http://filezilla.sourceforge.net/forum/

I tried to register. I did typed in right confirmation code. But it keep on saying I typed the wrong confirmation code. Tryied several times already.

Wish bug could be fixed.

Thanks.

On FileZilla 2.2.27, go to:

Edit->Settings->FTP Proxy Settings

and select any Proxy Type, then enter some details in the Proxy host, Port, User and Pass fields and save these.

Next go to Edit->Settings->FTP Proxy Settings again and try and remove all the entries you put in the fields and click on None for the proxy type.

You will get a /!\ dialog box with no text. If you press OK for the dialog box and then press OK for the settings window, you will get the same dialog box and cannot get out without pressing Cancel.

Items in exported queue contain password (albiet encrypted) even when "Don'tRememberPassword=1". I would think queued servers would need to reauthenticate when "Don't Remember" was set.

<?xml version="1.0" encoding="ISO-8859-1"?> <FileZilla> <TransferQueue> <QueueItem> <File Localfile="C:\Documents and Settings\brcummin\Desktop\ILSTU_report.zip" Size="9769744" Remotefile="ILSTU_report.zip" Remotepath="4096 0 8 ilstuftp"/> <Data Transfermode="1" Get="1" RetryCount="0" Open="0"/> <Server Host="ftp.peopleadmin.com" Port="21" User="ilstuftp" Pass="073007000092024003000072072" FirewallBypass="0" DontRememberPass="0" ServerType="4096" Path="" PasvMode="0" TimeZoneOffset="0"/> </QueueItem> <QueueItem> <File Localfile="C:\Documents and Settings\USER\Desktop\BADSPDF" Size="10" Remotefile="BADSPDF" Remotepath="4112 0 6 INRBRC 3 TMN 3 JCL"/> <Data Transfermode="1" Get="1" RetryCount="0" Open="0"/> <Server Host="mvs.host.domain.edu" Port="21" User="user" Pass="A mask of 24 numbers" FirewallBypass="0" DontRememberPass="1" ServerType="4112" Path="&apos;USER.&apos;" PasvMode="0" TimeZoneOffset="0"/> </QueueItem> <QueueItem> <File Localfile="C:\Documents and Settings\user\Desktop\FAW.GLS.DOWNLOAD" Size="620" Remotefile="AIX.xxx.xxxxxxxx" Remotepath="4096 0 4 home 8 user"/> <Data Transfermode="1" Get="1" RetryCount="0" Open="0"/> <Server Host="AIX.xxx.xxxxxxxx" Port="21" User="user" Pass="A mask of 24 characters" FirewallBypass="0" DontRememberPass="1" ServerType="4096" Path="" PasvMode="0" TimeZoneOffset="0"/> </QueueItem> </TransferQueue> </FileZilla>

Hello

first of all, sorry for my poor english!

Using Filezilla for one year I've stored all my site with all accesses.

I closed it, reset my computer, and at the start try to launch Filezilla, no problem, but all my sites stored are lost ! There is no more adresses, nothing at all.It's empty ! Can anyone tell me what append ? Because there is a lot of site and I don't remember all my accesses !

Can I find it or not ? Can anybody help me ?

Michel

FileZilla 2.2.27. When I try to set Default local directory in Site manager/My site/Advanced, the entry is stored only if it is short: Works: E:\Documents and Settings\jan\My Documents\Work\ Doesn't work: E:\Documents and Settings\jan\My Documents\Work\j

When uploading several html files with a javascript, with the file transfer settings as "auto", the javascript broke because some characters were deleted by filezilla. It took me hours to solve this problem.

It was solved by uploading the html files using the

binary setting, even though the files are all ascii encoded! btw, love the program! Thanks for all the hard work!

Filezilla Client (2.2.5) does not react to "STOR"- command, if the user has no permision to "LIST"- command.

I'l append a screenshot of the server-settings.

With any ohter FTP-Client there is no problem.

Here ist the client-log:

--- Status: Verbinden mit localhost... Status: Verbunden mit localhost. Warten auf Willkommens-Meldung... Antwort: 220-FileZilla Server version 0.9.11 beta Antwort: 220-written by Tim Kosse (Tim.Kosse@…) Antwort: 220 Please visit ​http://sourceforge.net/projects/filezilla/ Befehl: USER upload_only Antwort: 331 Password required for upload_only Befehl: PASS * Antwort: 230 Logged on Befehl: SYST Antwort: 215 UNIX emulated by FileZilla Befehl: FEAT Antwort: 211-Features: Antwort: MDTM Antwort: REST STREAM Antwort: SIZE Antwort: MLST type*;size*;modify*; Antwort: 211 End Status: Verbindung hergestellt Status: Verzeichnisinhalt wird abgeholt... Befehl: PWD Antwort: 257 "/" is current directory. Befehl: TYPE A Antwort: 200 Type set to A Befehl: PASV Antwort: 227 Entering Passive Mode (127,0,0,1,8,11) Befehl: LIST Antwort: 550 Permission denied. Fehler: Dateiliste konnte nicht empfangen werden ---

Checking the "always trust this certificate" is not working -- I am prompted every time whether or not to accept the certificate.

Client is FileZilla 2.2.28 (and I reproduced with 2.2.24 also).

Server is FileZilla Server 0.9.19beta

The popup prompt says self-signed certificate (which is true, as I used the FileZilla Server to generate the cert, several versions ago), error at depth 1 in the chain.

Hi there, I see this very often when running FZ client against the FZ server (implicit SSL). Not just the last version (19) - it has always been like that. Many times when I click on a directory it would wait for several seconds just to came back with "Could not retrieve directory listing". Refresh - and it does it just fine. Locally or over the Internet. This might not be a big issue when using a GUI client and you're in front of the computer all the time, but it's a real problem if it should be done from an unattended program. I'm currently evaluating IP*Works! SSL (​http://www.nsoftware.com/ipworks/ssl/default.aspx) and it seems to always have the problem, which basically renders it unusable with FileZilla.

Also - don't know if it's related to the above, but it also seems that the file transfer under SSL is not very reliable either. Even with a (supposedly) good connection, when I have multiple files in the queue I get a lot (looks like) of transfer errors and eventually some files won't get over, because the number of errors reached the limit. Again - not a huge deal if you're at the console all the time, but quite unusable for "set it and forget it" kind of mode...

Keep up the good work! --IK

When attempting to install FileZilla version 2_2_28, I receive the following error message:

The procedure entry point WaitForSingleObject could not be located in the dynamic link library Kernel32.dll

This error occurred on both NT SP6a and XP SP2. Version 2_2_27 installed without error.

In this situations:

• FTP Download
• Server: IIS 6
• Proxy: HTTP 1.1 without any authentication

The connection is quite unstable so many retries/resume are required to complete de download.

The download still continue when the local file size reach the remote file size. The local file size continue to grow and the file appear corrupted.

In my opinion: The resume restart download from the begining of the file but append to the previously downloaded part. It's not seems to be a server error because pure-http download manager (downloadthemall firefox extension or gigaget) download the same file without errors even with lot of stop/resume operations.

Checking the "always trust this certificate" is not working -- I am prompted every time whether or not to accept the certificate.

Client is FileZilla 2.2.28 (and I reproduced with 2.2.24 also).

Server is FileZilla Server 0.9.19beta

The popup prompt says self-signed certificate (which is true, as I used the FileZilla Server to generate the cert, several versions ago), error at depth 1 in the chain.

(My guess is that my previous report of this bug was closed because this bug doesn't affect people who use Windows 9x, or who only have Administrator on Windows 2000 and XP?)

I'm pretty sure this used to work before 2.2.23. I am currently using 2.2.28.

Now, when you click on a shortcut ("symlink") in the LOCAL file list, instead of moving to that directory (like it used to), it now opens up that directory in a Windows directory view window. (I don't think it's even a file explorer window -- is there a diff?)

I login to a server via SFTP using the IP address. The server name is set to some name like "server". I have a user id ssrini on the server. When I login from FileZilla, the user name is automatically set to ssrini@ipaddress but this login will not be found on the server and authentication fails. If I set login id to ssrini@server the login id is set by FileZilla to ssrini@server@ipaddress and this is also wrong.

How do I setup FileZilla to not append any data to the user id specified ? (I can do this in the Putty SFTP command line client easily !)

Regards Srini

According to the FTP specification (RFC0959), in active FTP mode, the data connection should be made from port L-1, where L is the port that the server is listening for control connections (see section 3.2 Establishing Data Connections, paragraph 1). This should be true for every active mode transfer.

FileZilla Server attempts to bind the outgoing port as per specification, but fails to do this when another active mode data connection exists. The second connection will get port L+1, and if a third connection is opened, then it will get an arbitrary OS-assigned port.

Versions:

• OS: any Windows version (tested on Windows XP SP1, SP2)
• Server: FileZilla Server, all versions (tested on

0.9.4, 0.9.8a, 0.9.19)

• Client: any FTP client (tested on Windows ftp.exe)

To reproduce:

• Open two concurrent connections from the same client

host to the same server host.

• Start downloading a large file in each connection.
• While the files are being downloaded, run "netstat -a

-n" on the client host.

Expected behavior:

• There are two control connections to server host,

port 21.

• There are two data connections from server host, port 20.

Observed behavior:

• There are two control connections to server host,

port 21.

• There is one data connection from server host, port 20.
• There is another data connection from server host,

unspecified port.

Cause:

• By default, the bind() function fails if the

requested local port is already used by another socket.

• To reuse the port, it is necessary to issue a

setsockopt(socket, SOL_SOCKET, SO_REUSEADDR, ...) call, passing TRUE as the option value, before binding the socket.

When using FileZilla client to look at a FileZilla server, if the initial directory contains no files, it generates an error that says "Could not retrieve directory listing" and the server generates an error that says "425 can't open data connection." This seems to only happen when the initial source directory on the server is empty (ie, there are sub- folders in the directory, but there are no files at that directory level).

Using beta2 still unable to connect to SSL/TLS servers.

Transfer queue seems to have a hard limit of items to queue. I tried to download about 600,000 files in about 2000 folders from a ftp server. Drag all the folders on the server to the local file tree. FileZilla would queue up only about just under 64,000 files and refuse to queue more. Furthermore, after the files are queued up, it does not automatically process the transfer queue. You have to check menu "Process Queue" for it to start processing queue. Could it be the counter of the queue item is a 16 bit integer - just a guess?

When we install filezila 2.2.x, the start menu items go into the user's profile, instead of in all users.

Therefore, if I install the application as "Administrator", when the user logs in, there is no way the user can start the application without going manually into C:\program files\filezilla.

I use Filezilla server 0.9.19 (I have installed the lastest version today) and Windows XP pro. I have two accounts. Admin a Power User. I installed filezilla as admin and I use it in Power user account. Sometime when somebody upload me a file, I don't have right to delete it from my disk. I need to login as admin and delete it.

I'm using FileZilla Server v0.9.20 on Windows XP SP2. In "Shared Folders", I can use Chinese in both directories and aliases. However, if I add a new user in "Users", type some Chinese characters in the description and click OK, then I get the following error message and the user is not added.

Protocol error: Invalid data, could not import account settings. Could not change account settings

Steps to reproduce:

1. Open FileZilla Server Interface
2. Go to Edit -> Users
3. Add a new user
4. Add "中文" to the description field
5. Click OK

If I modify "FileZilla Server.xml" directly and restart the service, I get the following message when I want to enter the "Users" setting.

Retrieving account settings, please wait... Done retrieving account settings Protocol error: Invalid data

Steps to reproduce:

1. Open "FileZilla Server.xml" in an editor
2. Add an user manually.

<User Name="test"> <Option Name="Pass"/> <Option Name="Group"/> <Option Name="Bypass server userlimit">0</Option> <Option Name="User Limit">0</Option> <Option Name="IP Limit">0</Option> <Option Name="Enabled">1</Option> <Option Name="Comments">中文</Option> <Option Name="ForceSsl">0</Option> <IpFilter> <Disallowed/> <Allowed/> </IpFilter> <Permissions/> <SpeedLimits DlType="0" DlLimit="10" ServerDlLimitBypass="0" UlType="0" UlLimit="10" ServerUlLimitBypass="0"> <Download/> <Upload/> </SpeedLimits> </User>

3. Go to Control Panel -> Administrative Tools -> Services and restart "FileZilla Server FTP server"
4. Open "FileZilla Server Interface"
5. Click the "Users" icon in the toolbar

I run an FTP server with FileZilla Server (currently on 0.9.20 on Windows Server 2003 SP1). Users use a great variety of clients to connect, and I have found that some have trouble with the service FileZilla offers. Sometimes, for little apparent reason, a client will not be able connect after it issues a PASV command. It appears to hang, as though it is expecting something further from the server.

One such client is Bulletproof FTP 2.58 under Windows. A trial version can be downloaded from bpftp.com .

I have attached the logs that I have on the server end and what the client reports.

After connecting and authenticating, the client issues PASV and then hangs. The server reports that it disconnects, but the client behaves as though it is still connected and is expecting a response to the PASV command.

Failed to retrieve directory listing with SSL/TLS using PASV

When SSL/TLS is enabled, FZ fails to retrieve a directory listing from vsftpd behind NAT.

I noticed the following difference between normal and SSL/TLS mode in the returned message from the PASV command.

Normal: [00:29:19] Command: PASV [00:29:19] Response: 227 Entering Passive Mode (72,32,40,237,6,74) [00:29:19] Command: LIST -a [00:29:20] Response: 150 Here comes the directory listing. [00:29:20] Response: 226 Directory send OK. [00:29:20] Status: Directory listing successful

SSL/TLS: [00:30:22] Command: PASV [00:30:22] Response: 227 Entering Passive Mode (192,168,1,237,6,83) [00:30:22] Command: LIST -a [00:30:43] Error: Transfer channel can't be opened. Reason: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. [00:30:43] Error: Could not retrieve directory listing

However, the same vsftpd config works with FlashFXP.

I wonder why FZ isn't able to pick up 72.32.40.237 as it could when using normal FTP as opposed to SSL/TLS.

Thanks,

ok, I wanted to use filezilla (2.2.29) to connect to ftps (ftp over TLS explicit, note that my server only supports this options for secure ftp) I am able to connect, but after that it tries to list the root folder and times out (the last command it sends to the server is LIST, and then times out)

I thought the server had problems, I contacted the support, they tried to troubleshoot, they even downloaded filezilla, but they couldn't replicate the issue. at the end I thought this could be a problem on my network, so I tried fireFTP (firefox extension), and it worked fine..

after that, I'm assuming this is a filezilla bug.

thanks

I am using FileZilla 2.2.29 to connect to an SFTP server based on commercial SFTP server code from Mocana (www.mocana.com).

When connected to the server, directory listings always show "<Empty directory listing>" in the remote site pane. However from the attached Filezilla log it would seem that the server is sending a perfectly good listing.

Other SFTP clients (openssh, WinSCP and psftp) can list files on the server without this problem.

Any help would be much appreciated.

I'm writing a piece of software that should do FTP(s) download/upload using /n Software's "IPWorks! SSL V6" and FZ (running the latest 0.9.20) Server as a test platform.

(There was an issue with the component not sending PROT in ImplicitSSL mode, which was solved by an undocumented setting in IP!Works. SSL)

Here's another one and I'm not sure if the problem is in IPWorks or FZ. From what I see in the FZ log I thing there’s a good chance that it’s actually a bug in FZ…

1. The sample program connects, and reads the current directory.
2. Then it tries to retrieve a directory listing with a file pattern that will not produce any results (like *.zip0 and there are no such files).
3. Connecting to one remote server this fails right away. On a FZ server running at the local machine it will take numerous retries to end up the same way. The chance of reproducing it on a local server is greatly increased if a low speed limit (like 1kB/s) is set (though the abovementioned remote server easily pulls a steady 40-50K without a problem and does not have any speed limits set).
4. The problem does not occur if a file, matching the pattern is found.

There's a snapshot from the console: (000021) 11/27/2006 16:20:43 PM - ftpuser (127.0.0.1)> PASV (000021) 11/27/2006 16:20:44 PM - ftpuser (127.0.0.1)> 227 Entering Passive Mode (127,0,0,1,117,48) (000021) 11/27/2006 16:20:44 PM - ftpuser (127.0.0.1)> LIST *.zip0 (000021) 11/27/2006 16:20:44 PM - ftpuser (127.0.0.1)> 150 Connection accepted (000021) 11/27/2006 16:20:44 PM - ftpuser (127.0.0.1)> SSL connection for data connection established (000021) 11/27/2006 16:20:44 PM - ftpuser (127.0.0.1)> 226 Transfer OK (000021) 11/27/2006 16:20:45 PM - ftpuser (127.0.0.1)> PASV (000021) 11/27/2006 16:20:45 PM - ftpuser (127.0.0.1)> 227 Entering Passive Mode (127,0,0,1,117,49) (000021) 11/27/2006 16:20:45 PM - ftpuser (127.0.0.1)> LIST *.zip0 (000021) 11/27/2006 16:20:45 PM - ftpuser (127.0.0.1)> 150 Connection accepted (000021) 11/27/2006 16:20:45 PM - ftpuser (127.0.0.1)> SSL connection for data connection established (000021) 11/27/2006 16:20:45 PM - ftpuser (127.0.0.1)> 226 Transfer OK (000021) 11/27/2006 16:20:46 PM - ftpuser (127.0.0.1)> PASV (000021) 11/27/2006 16:20:46 PM - ftpuser (127.0.0.1)> 227 Entering Passive Mode (127,0,0,1,117,50) (000021) 11/27/2006 16:20:46 PM - ftpuser (127.0.0.1)> LIST *.zip0 (000021) 11/27/2006 16:20:46 PM - ftpuser (127.0.0.1)> 150 Connection accepted (000021) 11/27/2006 16:20:46 PM - ftpuser (127.0.0.1)> 226 Transfer OK

Several “good” ones at the beginning and a “bad” one at the end. On the “good” attempts, between the “150 Connection accepted” and “226 Transfer OK” there’s a “227 Entering Passive Mode” line, which is missing on the “bad” one.

transfering a 9 GB file using port 21, I got a 4 GB (exactly 2^{32) file. Start and destination computer are Win2K on Intel. Client is Filezilla 2.2.28 Server is 0.9.20 beta}

As searching in summary and resulting in 0 matches concerning this bug, I'm going to postit:

under windows server 2003 and Filezilla server v 0.9.20

all downloaded files appears with CurrentYear-1 in datetime file properties in ALL windows OSes

It's like FileZilla decrements the year number in one??

I've a folder with files named after iso-dates (yyyy-mm-dd). Filezilla server seems to serve well for listing the first 240 (around that) files. Then it never finish the parts after that.

Runtime Error Dialog box heading: Visual C++ Runtime Library Windows message: This application has requested the runtime to terminate in an unusual way.

I've dowloaded the installer FileZilla_2_2_29_setup.exe from sourceforge. When installing filezilla, avg antivirus detected a trojans (PSW.Lineage.PQ, )in the temporary file : InstallOptions.dll!!!!!

Version 2.2.8 and several versions before

During a compile a new version of one of my apps using mingw (which takes a few minutes), the local file window is refreshed and it after that shows nothing.

I suspect that FileZilla steps out once it cannot gain access to files within a certain time frame.

A manual refresh after compile has finished does not make the empty local file window go away. The local directory window remains the same before, during and after.

The passwords listed are local only and don't need to be secure.

Scenario: Connecting to 172.31.255.180 (FTP SERVER) through a proxy server (127.0.0.1). Filezilla doesn't work if there is a header message on the FTP Server (Windows FTP Server)

I am using the USER RemoteID@Remotehost method:

Proxy Host: 127.0.0.1 Port: 21 Username: test Password: test

FTP Info: Address: 172.31.255.180 User: test Pass: test Port: 21

Log file attached.

• Running server 0.9.22 beta.
• I have a folder with 1168 files in it.
• All clients timeout when trying to open this folder (filezilla, IE, command line ftp).
• I moved half of the files into a subfolder: loaded fine.
• While loading with latest filezilla client, I see the bytes downloaded increase in 8k increments and freeze at 23360 bytes.

• here is a sample log, with IPs removed

(000011) 12/13/2006 18:58:30 PM - jkealey (MY_IP)> CWD inventory (000011) 12/13/2006 18:58:30 PM - jkealey (MY_IP)> 250 CWD successful. "/Inetpub/wwwroot/websitename.com/web/images/inventory" is current directory. (000011) 12/13/2006 18:58:30 PM - jkealey (MY_IP)> PWD (000011) 12/13/2006 18:58:30 PM - jkealey (MY_IP)> 257 "/Inetpub/wwwroot/websitename.com/web/images/inventory" is current directory. (000011) 12/13/2006 18:58:30 PM - jkealey (MY_IP)> TYPE A (000011) 12/13/2006 18:58:30 PM - jkealey (MY_IP)> 200 Type set to A (000011) 12/13/2006 18:58:30 PM - jkealey (MY_IP)> PASV (000011) 12/13/2006 18:58:30 PM - jkealey (MY_IP)> 227 Entering Passive Mode (SE,RV,ER,IP,15,201) (000011) 12/13/2006 18:58:30 PM - jkealey (MY_IP)> LIST (000011) 12/13/2006 18:58:30 PM - jkealey (MY_IP)> 150 Connection accepted (000011) 12/13/2006 18:58:33 PM - jkealey (MY_IP)> 226 Transfer OK (000011) 12/13/2006 18:59:07 PM - jkealey (MY_IP)> disconnected.

The last disconnected is the filezilla client that disconnects after a timeout. Other clients like IE stay connected.

Dear all,

I create a separate thread in the destructor of ControlSocket. But the server exited unexpectedly and I couldn't stop the server from the service console. Can I do something asynchronisely when the user disconnected with the server?

Thanks in advance and look forward to your reply.

I use regularly your application to upload files from DVD's. I took me a while to identify that a read error coming from an external DVD drive connected with firewire, correctly detected by windows if trying to copy the file from the dvd to any place on the disk, would just hang filezilla for a while, and finaly report upload errors without clear information, erroneously leading to think that the uploaded server in misbehaving. I agree we are a little bit out of scope, but maybe this is a lead to a need for a beter information of the user when something is wrong on his side?

Hi,

I am unable to use passive recently. When using passive I get an IP that is not my external IP. I tried to open the script page on a web browser ​http://filezilla.sourceforge.net/misc/ip.php, and got an error. I tried to use an other page that shows my IP, but there was no change, so I guess the FileZilla server expects a certain FORMAT for this script result. I would suggest replacing such FORMAT with a regex search for a number of the format N.N.N.N or in other words "
d+
.
d+
.
d+
.
d+", this way any page that shows the IP could be used.

Summary: A. fix the script page.

2. fix the script interpretation

FileZilla 3.0.0 beta4 Language: Chinese(simplifed) Quickconnect's menu->clear history In Chinese, phrase "clear history" is "清除历史记录" not "清楚历史记录" Thanks, over

FileZilla client 2.2.29 crashes when it tries to create on the client side a file whose path+filename is over the Windows filename length limit (which seems to be 256 characters excluding C:\ or similar in the beginning of the path).

The following log is from downloading files test56789012.txt and test567890123.txt to client directory C:\testdir01\testdir02\testdir03\testdir04\testdir05\testdir06\testdir07\testdir08\testdir09\testdir10\testdir11\testdir12\testdir13\testdir14\testdir15\testdir16\testdir17\testdir18\testdir19\testdir20\testdir21\testdir22\testdir23\testdir24 The first file succeeds (having path+filename only 256 characters long), but the second one fails (its path+filename being 257 characters long).

Status: Starting download of /test56789012.txt Command: TYPE A Trace: FtpControlSocket.cpp(823): OnReceive(0) OpMode=24 OpState=13 caller=0x003f95b4 Response: 200 Type set to A Trace: FtpControlSocket.cpp(2004): FileTransfer(0, FALSE, 0) OpMode=24 OpState=13 caller=0x003f95b4 Command: PASV Trace: FtpControlSocket.cpp(823): OnReceive(0) OpMode=24 OpState=17 caller=0x003f95b4 Response: 227 Entering Passive Mode (217,78,32,197,224,216). Trace: FtpControlSocket.cpp(2004): FileTransfer(0, FALSE, 0) OpMode=24 OpState=17 caller=0x003f95b4 Command: RETR test56789012.txt Trace: TransferSocket.cpp(446): OnConnect(0) caller=0x01107ccc Trace: FtpControlSocket.cpp(823): OnReceive(0) OpMode=24 OpState=18 caller=0x003f95b4 Response: 150 Opening ASCII mode data connection for test56789012.txt (746 bytes) Trace: FtpControlSocket.cpp(2004): FileTransfer(0, FALSE, 0) OpMode=24 OpState=18 caller=0x003f95b4 Trace: TransferSocket.cpp(558): SetActive() caller=0x01107ccc Trace: TransferSocket.cpp(446): OnConnect(0) caller=0x01107ccc Trace: TransferSocket.cpp(518): OnClose(0) caller=0x01107ccc Trace: TransferSocket.cpp(1125): Close() caller=0x01107ccc Trace: TransferSocket.cpp(1125): Close() caller=0x01107ccc Trace: FtpControlSocket.cpp(1969): TransferEnd(24) OpMode=24 OpState=19 caller=0x003f95b4 Trace: FtpControlSocket.cpp(2004): FileTransfer(0, TRUE, 0) OpMode=24 OpState=19 caller=0x003f95b4 Trace: TransferSocket.cpp(96): ~CTransferSocket() caller=0x01107ccc Trace: TransferSocket.cpp(1125): Close() caller=0x01107ccc Trace: FtpControlSocket.cpp(823): OnReceive(0) OpMode=24 OpState=19 caller=0x003f95b4 Response: 226 Transfer complete. Trace: FtpControlSocket.cpp(2004): FileTransfer(0, FALSE, 0) OpMode=24 OpState=19 caller=0x003f95b4 Trace: FtpControlSocket.cpp(3988): ResetOperation(1) OpMode=24 OpState=19 caller=0x003f95b4 Status: Download successful Trace: FtpControlSocket.cpp(2004): FileTransfer(17852120, FALSE, 0) OpMode=0 OpState=-1 caller=0x003f95b4 Status: Starting download of /test567890123.txt

The installer flat out says you *MUST* accept GPL to install FileZilla 2.2.29. However, The GPL V2 states:

Section 0:

"Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted..."

And similarly, Section 5:

"You are not required to accept this License, since you have not signed it."

Could you look into rewording the license screen on the installer?

See ​http://www.fsf.org/licensing/licenses/gpl.html

Hi

I'm using FileZilla 0.9.19 Beta and in the Passive Mode Settings the link "​http://filezilla.sourceforge.net/misc/ip.php" is not retriving the external IP, seeing that i have a dynamic IP i need this option, the SSL FTP only works from outside the local network after i manually put the external IP in the field "Use the Folloing IP".

What am i doing wrong? Is the link correct?

Thanks Jorge Maia

I've seen similar bugs opened and closed in this bug tracking system, usually blaming the router, but I think that this is still a problem in the latest version of Filezilla Server 0.9.22. Here's what I did to demonstrate this.

Inside a router firewall, I set up two servers, one WinXP with Filezilla 0.9.22. The other was a CentOS server running vsftpd. The router was set up to pass ports 20,21 as well as ports 1024-1033, with the two FTP servers configured accordingly.

Outside the firewall, I had two Unix servers, one running CentOS, and the other running FreeBSD.

The FTP client on the CentOS system speaks PASV mode only. When the router was set to point to the CentOS system behind my firewall, then things worked -- the 227 response provided my public IP (of the router), and two port numbers, which when multiplied together, provided something in the specified range of 1024-1033. However, when the router was redirected with the same rules to point to the Filezilla server (differen LAN IP only), then I could log in, but I could not execute an 'ls'. Looking at the Filezilla server log, a correct 227 response to the PASV mode command was entered, but apparently never properly received by the CentOS FTP client. So it hung until the connection timed out.

On the other hand, the FTP client of the FreeBSD server outside the firewall speaks EPSV, which seems to work fine with both the CentOS and Filezilla servers behind my firewalls. With EPSV, the port number to use is transmitted premultiplied together.

If the router were to blame, it would not have handled the CentOS system behind the firewall properly either, would it?

A log file of the CentOS client trying to connect to the two server is attached.

I recently upgraded from 2.2.29 to 2.2.30. 2.2.29 was working flawlessly before the upgrade. Immediately after upgrading, SFTP stopped working. Upon trying to connect, FileZilla would report in the log window:

Error: Can't start SFTP process. Please ensure that the file 'FzSFtp.exe' is in the same folder as 'FileZilla.exe' Error: Unable to connect!

It would then retry several times with a pause in between tries. All attempts would fail. I went to my FileZilla installation folder (C:\Program Files\FileZilla) and verified that the program FzSFtp.exe did exist. When I opened a command prompt in that folder and manually executed that command, I got:

C:\Program Files\FileZilla>fzsftp Program too big to fit in memory

No configuration changes were made between the working version of 2.2.29 and the upgrade. Downgrading back to 2.2.29 let FileZilla start working again, so I'm assuming something changed in 2.2.30 that broke FzSFtp.exe. I was able to reproduce this problem on two different systems (one XP Pro SP2, the other XP Home SP2).

If the user name has a character % the connection it gives error. Filezilla 3.0.0-beta4 for Linux

FileZilla_Server-0_9_22.exe

i want append file, when empty file exist locally. error transfer occur, when permission set of R+ W+ A+ D- when i change permission to D+, transmission error disappears

log begin

(000002) 12.01.2007 11:39:03 - xxxxxx (10.35.xxx.xxx)> 230 Logged on (000002) 12.01.2007 11:39:04 - xxxxxx (10.35.xxx.xxx)> PWD (000002) 12.01.2007 11:39:04 - xxxxxx (10.35.xxx.xxx)> 257 "/" is current directory. (000002) 12.01.2007 11:39:04 - xxxxxx (10.35.xxx.xxx)> PORT 10,35,194,43,112,102 (000002) 12.01.2007 11:39:04 - xxxxxx (10.35.xxx.xxx)> 200 Port command successful (000002) 12.01.2007 11:39:04 - xxxxxx (10.35.xxx.xxx)> TYPE I (000002) 12.01.2007 11:39:04 - xxxxxx (10.35.xxx.xxx)> 200 Type set to I (000002) 12.01.2007 11:39:04 - xxxxxx (10.35.xxx.xxx)> SIZE Abc-(10.35.xxx.xxx)_2007.01.12-00.10.00.7z (000002) 12.01.2007 11:39:04 - xxxxxx (10.35.xxx.xxx)> 213 0 (000002) 12.01.2007 11:39:04 - xxxxxx (10.35.xxx.xxx)> STOR Abc-(10.35.xxx.xxx)_2007.01.12-00.10.00.7z (000002) 12.01.2007 11:39:04 - xxxxxx (10.35.xxx.xxx)> 550 Permission denied (000002) 12.01.2007 11:39:04 - xxxxxx (10.35.xxx.xxx)> disconnected.

log end

FileZilla Server.xml begin

[==skip==] <Group Name="pal"> <Option Name="Bypass server userlimit">0</Option> <Option Name="User Limit">0</Option> <Option Name="IP Limit">0</Option> <Option Name="Enabled">1</Option> <Option Name="Comments"/> <Option Name="ForceSsl">0</Option> <IpFilter> <Disallowed/> <Allowed/> </IpFilter> <Permissions> <Permission Dir="C:\Pal"> <Option Name="FileRead">1</Option> <Option Name="FileWrite">1</Option> <!-- bug line begin --> <Option Name="FileDelete">0</Option> <!-- bug line end --> <Option Name="FileAppend">1</Option> <Option Name="DirCreate">0</Option> <Option Name="DirDelete">0</Option> <Option Name="DirList">1</Option> <Option Name="DirSubdirs">1</Option> <Option Name="IsHome">1</Option> <Option Name="AutoCreate">0</Option> </Permission> </Permissions> <SpeedLimits DlType="1" DlLimit="10" ServerDlLimitBypass="0" UlType="1" UlLimit="10" ServerUlLimitBypass="0"> <Download/> <Upload/> </SpeedLimits> [==skip==]

FileZilla Server.xml begin