Custom Query (2164 matches)

Problem.

I've currently synced the sitemanager.xml file across my windows and linux computers (using Dropbox). I have also setup apache home directories to run off /www (on linux) and c:/www (on windows). Therefore all settings are the same.

When using syncronised directories in filezilla, one version has c:/www and other other uses /www which means they are different and breaks the synchronisation on one of my computers.

Solution

It would be great if the windows machine read the drive letter separately which means the path was /www on both machines allowing a completely synced working sitemanager.xml file.

I am using filezilla in my daliy work, it works fine, but is seams that do not support Send kepp alive request via SSH connection, even though checked the options in settings window. When I return back to use it after long time work, the connection has timed out, but it still send such as "ls" command, I must cancel all opertions and refresh again to reconnect the server.

Hello, im sugesting a new button on filezilla. Filezilla have a download button for the files/folders, but, why dont have a move button on the same place? for FTPs that we have full access, i think this would be a great function.

Thanks for this great program Esteban

Can you please add an option to the Kiosk mode never to save the password, even if it is the same session. I have users who will keep Filezilla running 24x7 only to get around the having to type their password again.

What I want is in Kiosk mode to have the ability to remove the "Remember password for this session"

Thanks

Using the latest stable release for Mac OS X. FZ is using Command + M to both minimize the app to the dock (This may be a global shortcut on OSX.) and to bring up the manual transfer window.

I'm required to do a lot of manual transfers from a blind ftp site, for some reason I can only use FileZilla, terminal doesn't even work. Definitely not critical, but slight annoyance

The aim is to run the FTP Client without GUI on a NAS and select downloads via remote GUI or Web Interface.

Another (but not so good) option would be a command line based Filezilla client which loads prepared queues

I tryed to Connect to an FTP which runs on an B&R Programming Logical Controller (PLC).

(1) If i used the Anonymous User to log in, FileZilla successfuly connects to the C: Partition on the CF Installed in the PLC. But in this mode i can't change to the F: Partition. Short-Log: Befehl: CWD F: -> Antwort: 550 Guest access denied.

(2) So i tryed to use an Username (User: 1) with the Password (Pass: 1). This results in an Error after successfuly requesting the current directory. Short-Log: Antwort: 257 Current directory is "C:" Fehler: Verzeichnisinhalt konnte nicht empfangen werden

(3) If i use WS_FTP the whole thing works, so i thought the Log-File could give you interessting informations ... so i also added it. Connecting with User:1 and Pass:1

Would be happy if i can work with FileZilla in the Future, because of its other functions.

The Full Logs are in the File attached to this ticket.

I've tried to save this queue (with 11 files) but the XML generated was empty (attached).

Filezilla Version: 3.3.5.1 OS: win XP SP3

I suggest the feature save the queue in csv/txt form or another context menu item to allow save the queue on clipboard.

Hello, My filezilla program refuses to download videofiles from my humax 5200c when in the name german letters are used like the ringel-S β or signs like ö and like this. Using my microsoft internet exployer i can download them without problems. Can you fix this bug? Greetings, Peter

When I connect to an MVS host and try to add a bookmark to e.g. 'A036.FILES.XREF', I always get a popup dialog that says:

Could not parse remote path.

I get the same result with or without the enclosing quotes around the path.

FileZilla Client

Version: 3.3.5.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2010-11-21 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.11 GnuTLS: 2.10.2

Operating system:

Name: Windows XP (build 2600, Service Pack 3) Version: 5.1 Platform: 32 bit system

I have the latest version of Filezilla for Mac and am using Mac OS 10.5.8.

The problem is that the top of the Filezilla window is stuck under the Macs menu bar so I can't move the Filezilla window to a different location on my screen.

I took a screenshot of it but don't see anywhere here to attach it so you can see it.

Thanks

TAKES THE PASSWORD BUT DOES NOT SEND TO SERVER.

ANYTHING OVER 99 CHARS AND I CAN AUTHENTICATE.

Trace: Pageant is running. Requesting keys. Trace: Pageant has 0 SSH-2 keys Command: Pass: Trace: Sent password Trace: Access denied Error: Authentication failed.

WORKS WHEN I CHANGE LENGTH OF PASSWORD

Steps to reproduce:

• connect to a server
• wait some time, so the connection times out
• upload a file: filezilla will automatically reconnect in order to upload the file
• wait until the upload finishes

Expected result:

• the remote directory listing should automatically be refreshed and you should see the file you just uploaded

Observed result:

• the remote directory listing is NOT refreshed, and you don't see the file you just uploaded

In the console window where you see all the commands and responses, you do see a message saying "directory listing succesfull", so I guess filezilla does retrieve the listing but it fails to show the updated directory listing in the display on the right.

If you manually refresh using the refresh button, then you'll see the directory listing refreshed including the just uploaded file.

This only happens when you upload a file after the connection has timed out (and filezilla automatically reconnects). If you are already connected when you do the upload, then the refresh does work correctly and you seen the refreshed list as soon as the upload is finished.

It would be great to have a 'Last downloaded' date column at the client right side listing

What if FileZilla could be used as a download manager for browsers? It could either hook into the browser, and be set to the default download manager; or, perhaps when you right-click a link, you could have the option of "Download with FileZilla"?

I tried to download a file from my FTP server when another user had finished uploading it. FileZilla still showed a file size of 12 MB because I hadn't refreshed it, so for the actual download of 20 MB it took "more than 100%".

Maybe FZ should automatically refresh the file listing before estimating download times.

On the left panel I have opened files from my PC, on the right panel I have FTP files from server.

When I change or rename any files in my PC with my HTML editor and save them back on my PC, the files on the left panel in Filezilla remains unchanged as they were before - with old filename and not ordered by date of change untill I refresh the panel. I need to reopen my directory in filezilla or refresh to see the changed files.

Is it possible to sort the files automatically when they are changed? For example Total Commander works with automatic refresh - when I change any file, the file is automatically changed on opened list too.

The situation is that I use a laptop at multiple locations with an external monitor and extended desktop (not mirrored). One of the locations the orientation of the external monitor is to the right of the laptop and the other location has the external monitor above the laptop. With the monitor specified to the right, I open Filezilla and drag it to the external monitor. Closing and then opening Filezilla will cause it to open in the extended monitor. If I now close Filezilla and either change the relationship so that the external monitor is above the laptop or move to the other location, and then open Filezilla, the Filezilla window will open in the non-existent right hand extended desktop. In order to rectify, I need to to change the orientation so that the external monitor is specified to the right and then drag Filezilla back to the laptop. Other apps open in the laptop screen after the orientation change.

To reproduce: 1)using an external monitor specified as extended desktop and side by side, open Filezilla in the main window and move to external monitor. 2) Close Filezilla 3) Change orientation of monitors so that the external monitor is above main desktop. 4) open Filezilla 5) Filezilla will open in the previous location and cannot be seen. 6) change orientation of monitors to be side by side and Filezilla will be displayed.

Hi Sir,

This is pratap from india. i am suing this FileZilla since last one year. Now i am facing one problem. I am not able to connect to FTP. the same FTP server is connection from othere system. Could please let me know what are things do i need to check for good FTP connection. I am getting the below message.

Status: Resolving address of ftp.jhancock.com Status: Connecting to 206.33.173.11:21... Status: Connection established, waiting for welcome message... Error: Could not connect to server Status: Waiting to retry...

Please help me in this . i am searching for this since last two weeks.

Thanks Pratap

Hi,

This is related to (but not a duplicate of) #2745

When working with sites that have several levels and copious subfolders, I simply do not want the remote view to expand every directory. It's really annoying and the only way to collapse them all is to restart Filezilla.

Suggestions:

• Have an option "do not automatically expand remote view"

or failing that:

• Have a simple "collapse/expand all" button on the remote view

Many thanks.

I work on servers with multiple developers and we don't have a good solution in place for that. A great feature would be when you click the edit button it compares the date of your local file to the date of the remote file and if the remote file is newer than the local file it brings up a prompt and asks you if you want to download the remote file before editing. This should have an ability to turn this on or off in settings.

Thanks for the great product!

It would be massively useful to have a row of navigation buttons above side of the listings.

These would include, but perhaps not be limited to: Up, Back, Up-To-Root-Of-Listing (i.e. the FZ entry point for this session, not the root of the folder/directory structure), Refresh.

Often I have listings on each side that are hundreds of files long. I have gone most of the way down one or both sides. To get back to the top or to the containing folder/directory, I have to slide up or page up or something on each side. When using many times a day, it adds up to a lot of unnecesssary mousing around.

I have a PC running Windows and an Intel iMac running Leopard (10.5.8) which is bound to Active Directory for user authentication. SSH was enabled via the "Sharing" Preference Pane (aka Remote Login). When I use FileZilla to SFTP into the Mac, it incorrectly parses the folder and file names. Specifically, the "Group" name seems to be throwing it off. I've attached an example of what I see in the File and Folder panes in FileZilla. If I attempt to double-click on, say, the Desktop folder to open it I get:

Error: "Directory /Users/hunters/advanced administrators     1054 Mar  1 14:01 Desktop: no such file or directory".

I can provide more information if it helps. Have also verified that the Mac version of Filezilla client also has this bug.

Showing TOTAL progress on the windows 7 taskbar would be very handy..

If the server does not return exactly 32KB of data the following error is generated: error while reading: received a short buffer from FXP_READ, but not at EOF - The specific issue is around line 1331 of sftp.c. There is a rather broad comment on 1289 in which the developer was unsure how to handle a short read. - The RFC is a bit fuzzy in describing this case (section 8.2.1): " However, the server MAY respond with less data if EOF is reached, an error is encountered, or the servers internal buffers can not handle such a large request. " I believe the key point is "MAY respond with less if the servers internal buffer cannot handle such a large request" is sufficient broad that the client should not assume that fewer than 'length' bytes is indeed EOF or an error. - I'm unsure about windows API; but for variants of UNIX (including linux) this closely follows the read API in which the implementation is free to return fewer than N bytes (hence the return values indicate the number of bytes read). While typically synchronous reads will indeed return N bytes they are not required to do so. - Anyways we ran into this issue when the server did in fact return fewer bytes and the client (filezilla) abruptly exited. - Following the above convention we believe the loop should be written as:

while(toread > 0 ) {

n = read(buf,MIN(bufsize,toread); if( n indicate error ) error; toread -= n;

} rather than while(toread > 0 ) {

n = read(buf,MIN(bufsize,toread); if( n != MIN(bufsize,toread) ) error;

} - Here is the code from the standard linux sftp.c client: - code to actually read the data: while (total_read < buffer_maxlen) { bytes_requested = buffer_maxlen - total_read; *(s++) = SSH_FXP_READ;

request_id = sftp->request_id++;

. . retcode = _libssh2_channel_write(channel, 0, (char *) packet,

packet_len)

retcode =

sftp_packet_requirev(sftp, 2,read_responses,

request_id, &data, &data_len);

. .

case SSH_FXP_DATA:

bytes_read = _libssh2_ntohu32(data + 5);

if (bytes_read > (data_len - 9)) {

sftp->read_packet = NULL; sftp->read_state = libssh2_NB_state_idle; return -1;

}

#ifdef LIBSSH2_DEBUG_SFTP

_libssh2_debug(session, LIBSSH2_TRACE_SFTP, "%lu bytes returned",

(unsigned long) bytes_read);

#endif

memcpy(buffer + total_read, data + 9, bytes_read); handle->u.file.offset += bytes_read; total_read += bytes_read; LIBSSH2_FREE(session, data); /*

• Set the state back to allocated, so a new one will be
• created to either request more data or get EOF */

sftp->read_state = libssh2_NB_state_allocated;

The number of simultanious connections to any given server should be settable individually per destination server. Indeed, it may well be that one server can sustain many simultaneous connections while another may support only a few. Therefore, it would be better if there were an option in the server profile to set this number.

When the queue of transfers contains transfers that are destined to or from more than one server, it would be more optimal to process the transfers in such an order that the different servers would be used in a round-robin fashion. Parallelism can thus be increased without increasing the number of simultaneous connections to any given server.

Hi!

I would like to recommend a feature to upload files using a temporary filename and thn rename the files after the queue is completed.

Okay, this sounds a bit strange at first glance. So let me explain why this feature would be very worthy: I have a PHP web application that is used nearly 24h a day. Whenever fixing a bug or uploading a new subversion, PHP uses the incomplete files and - consequently - the script crashes.

If a file would be uploaded to a temporary name, first, and then replace the original file in a second step, there would be no incomplete files in the program structure. If this was possible for whole queues, even the time when there are files from different program version, could be reduced by about 95%.

I admit that for citical systems, one would upload the whole application into a temporary folder and then rename the folder manually. However, for most not-so-critical applications, the upload-to-temp would be very helpful. For citical systems the manual step (provoking handling errors) would become superfluous.

Thank you BurninLeo

Actually filezilla seems to accept only the private keyfile stored in the default settings from putty. The log shows that it checks only this one and not all keys added to pageant - so I always have to change putty's default settings if I want to access a server with a different keyfile. It will be more convenient to allow the preselection of the keyfile in the servermanager for each account separately. Maybe this could be achieved in a similar way like pscp which accepts a commandline like this one which I use from a perl script to update a file directly from an SciTE or Geany: pscp.exe -i keyfile -l user "localpath" host:remotepath. If the keyfile is loaded in pageant it will be used without an additional passphrase request.

If a theme does not include a 48x48 pixel icon set, then the speed limit icon will be distorted when opening the Speed Limits dialogue (see screenshot).

A current work around for this is to use the 48x48 icon set from the classic theme if a 48x48 icon is not present for a theme used i.e. minimal or cyril. It would be much better if Filezilla could automatically detect that the theme does not have a 48x48 icon set and fall back to the classic theme speed limit icon.

Alternative ideas:

• the 16x16 icon can be used but will have to be vertically and horizontally aligned to the 48x48 area
• The speed limit icon can be dropped in the speed limits dialogue box
• The above, but the 16x16 icon is placed in the title bar next to "Speed Limits"

This is currently only on Windows (daily build 2011-03-16 used) as linux versions fall back to the classic speed limit icon as expected.

I have a customer that has spaces in their user groups (why, because they can). FileZilla Client does not dislplay any filenames where the user group has spaces in it. If I chomd the files with a user group that does not have a space, the files list in the FileZilla client.

Could you place a box in each local/remote panes to search in displayed files and folders? Like Firefox search box that searches in folder tree (that are displayed) and highlights matched files in tree

Client version 3.3.5.1 When I upload a file the timestamp shown on the server is one (1) hour off. I have had the issue twice, both times after the change to/from DST. Looking at the signon log I see that the system calls mtime with the name of a file on the server as an argument. Actually the first time it was a file the second time it was a folder name. I was able to fixed the problem both times by uploading new versions of the respective files.

The log shows: Status: Resolving address of Stratus Status: Connecting to 192.168.1.237:21... Status: Connection established, waiting for welcome message... Response: 220 stratus FTP server (FTP 1.0 for Stratus STCP) ready. (Compatible with OS TCP/IP) Command: USER dave Response: 331 Password required for dave. Command: PASS Response: 230 User dave.SightLine logged in. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "%s1#m1_d01>SightLine>dave" is current directory. Error: Failed to retrieve directory listing

I am presuming that the problem is the path separator of '>' rather than the more common '/' or '\'

Hi,

I have the following suggestions for the "Action after queue completion" option:

1. It would be great if there was an option to manage custom commands so that I could permanently add them to the list of possible actions. E.G. let's say I always need to run the command C:\RUN.BAT after every queue - If I could give this a name (RUNME) and add the command to the standard available list I wouldn't have to manually type it every time.

2. Less important than the first option - but sometimes I need to run the run.bat command, and then shutdown the pc, or run another runme2.bat command - I know I can build a 3rd bat command which does all - but certain combinations are not possible. The ability to run more than one action would be great too. Some sort of multiple action manager would be needed thou' as sometimes I would need to wait for the first command to finish - so for example I would need to insert a 5 minute delay between issuing the run.bat command and the shutdown command!

Cheers!

A tetraplegic friend use his computer with the chin, and he can only access to the left click. The keyboard is replaced by "clavicom", a software similar to the one given by the windows accessibility tools.

By this way, for example he cannot delete files on his ftp server. This is because the right click is physically not accessible, and the delete key and right click key on the virtual keyboard does not work properly.

The only way to delete a file is to open the windows virtual keyboard and click on delete key.

Hello.

I would like to ask you to add "default action after queue complete" to settings, or at least remember last choice. Now I have to set it every time I start downloading, because it always jumps back to choice "Do nothing". Thank you in advance.

Kaci

Good Morning:

I've read the previous posts, and I do realize that the default FTP protocol does not support file date/time preservation. I also realize that not all FTP servers support MDTM. The problem is that if an updated file is uploaded to a web server only one short minute after it's been saved, FileZilla's compare-by-date feature is rendered useless because the uploaded file will have a later time stamp.

For those of us who do use web/ftp servers that do support MDTM, and I'm sure there are many, *please* reconsider adding this feature to FileZilla. If file date/time preservation was among FileZilla's many other features, it would be the *perfect* FTP program, in my opinion.

Hello.

I would like to ask you to make a modification in directory navigation: after I leave a directory (go one level up), the selection jumps back to the beginning of the list. I think it would be much better if selection would stay on the directory I've just left. Thank you in advance.

Kaci

Now I can only clean the history list by removing them all together and re-entering them again. That is cumbersome, because I run 11 sites.

I would like to be able to remove one line at a time.

FileZilla client version 3.4.0, on Mac OS X 10.6, Intel Core 2 Duo.

Synchronized browsing is on, directory comparison is on. Look at a directory with many files, so there are scroll bars in the listing directories. Now scroll one of listing, either local or remote. The other one does not scroll. (On Windows the listings scroll in sync.)

Please implement interactive QuickConnect: this could be done by addign a checkbox to the quickconnect bar "Interactive Login". When it is activated fields left blank would be asked for in a popup dialogue (The same behaviour as when interactive from server Manager is chosen)

When doing a long download with FileZilla, time counter for used time goes zero after two hours. So when download have gone over 1:59:59, counter resets to 00:00 and goes on from there.

Haven't tested if it goes back to zero multiple times (when transfers lasts more than 4 hours etc).

More than one dialog block key events on client.

ej: Dialog of reopen file currently editing and overwriting new upload(download) when saving the same. (attaching screenshot of the behaviour)

when this happens the dialogs ignores any key pressed or mouse clicks on any option

OSX: 10.6.7 Filezilla Client Version: All corresponding to this plataform

Hi all:

It would be great to search in "Site manager"`s "Select entry". I´m a web developer and I have about 200 FTP sites ordered in different folders. I try to be very organized but often is very difficult to find a particular site.

Thanks for this great product!

Hello Is it possible for the developer/s to add an option of deleting the source files/folders after a FTP transfer has been successfully completed in the next release of FileZilla Client?

Hi, Would you please add this feature; if the filename is same but the filesize is different then overwrite otherwise dont overwrite. Sometimes whent the connection is broker and partial files are sit in the destination location. Source files should overwrite those partial files. Thanks

It would be great if you had the option of making one of the sites in Site Manager the default site, so it would automatically connect when FileZilla is launched.

FileZilla remembers the local directory path from the last time you ran FileZilla. But if the deepest local directory is deleted, it instead defaults to the filesystem root, which I think is far from optimal.

Let's say that the last local directory was: /home/username/Desktop/example.com/store/

And some time between closing FileZilla and opening it again, you delete the "store" directory.

FileZilla's current behavior is to set the local path to filesystem root: /

Whereas I think it would be a lot nicer if FileZilla placed the user in the closest parent directory possible, in this case: /home/username/Desktop/example.com/

The "Already connected" dialog asks if the user wants to abort the previous connection or open the new connection in a tab. It does not give a checkbox option to automatically apply that choice in future instances, which makes the dialog a needless prompt for users who would always make the same choice.

Please can you refrain from creating uninstaller shortcuts in the start menu with future installers.

The purpose of the start menu is for shortcuts for accessing/running applications, not for performing maintenance on them. In the same way it would be a bad idea to clutter the desktop with them, wouldn't it!

Placing them in the start menu adds clutter and it makes them more accessible to novice users who often need protecting from themselves, increasing the burden on those that may maintain their computers for them - either because we have to answer questions about what the hell it is that they've just opened, or actually having to reinstall software. It also discourages novices from exploring the applications available to them in their start menu when such things clutter it and provide potential pitfalls.

It is much better that uninstallers for all programs are kept in one central location - within the uninstall software page of the control panel.

Would it be possible to implement an option that would allow the client to install updates automatically as they become available?

File listing in "External site" keeps refreshing/changing during transfer. This is awfully annoying since it:

a) isn't necessary at all. b) gets in the way of browsing the directories.

This is with v3.4.0 on XP

Hi, Would you please add this feature; if the (1)filename and (2)file-Size are the same as the source and the destination location then it should skip the file to download/upload to/from the server. Currently it skips the file only if the filename is the same. It doesn’t check the filesize. I would like to skip the file if the source filename and file-size is the same otherwise overwrite. Thanks, Tim.

I have been having this problem for a while and am finally getting around to reporting it. This is happening on one specific computer, and only happens on files larger than a certain size (somewhere around 87Kb it would start happening, but inconsistently). The same files would transfer every time with another SFTP program on the same computer and would transfer with FileZilla 3.4.0 on another computer (both Windows 7 SP1 64-bit). This is transferring to a shared computer at DreamHost. Attached are logs of my testing.

Using a Windows Filezilla (3.4.0) client, transferring ASCII files to Unix based servers (over secure port 22) are transferred as BINARY.

This is the same as reported in ticket #5378.

I understand the developer's argument made in #5378 (the protocol doesn't support it) -- but my request is to have the FileZilla client strip the <control>-M's from the blob before transferring to the server. This is seemingly trivial to implement (look at dos2unix source).

As noted in the other bug report, other clients (such as WinSCP, just tested) are able to transfer these files correctly.

Please reconsider #5378, and fix this bug (even if you want to call it a feature).

FileZilla stores it's settings in a hidden folder called ".filezilla" directly in the user folder.

On OSX there is a special folder called "~/Library/Preferences" for user defined preferences. And the "Application Support" is for all the things that are needed by FileZilla to work.

To make backups, etc. more easy FileZilla should use this places for storing it's data.

Hide address and login info in tabs which added to manager. Show only names of sites as added in site manager. Add option in interface menu in settings.

I use filezilla client to work daily with 4 open tabs / connections. Good that I found bookmark is useful but I still need to open the bookmark connections 4 times separately. Is it possible to develop a way that I can save my startup preference so I don't have to open the 4 connections manually each day but it auto load the settings in startup?

The bookmarks are very useful, but I am not able to import and export them.

I've come across a situation that can't be all that uncommon, in which the FileZilla client's ASCII mode is insufficient.

Like many people I use Cygwin with Windows. When I create a text file using Cygwin Emacs, it's a UNIX file (EOL = LF). When I then try to use the Windows client to transmit the file in ASCII mode, it doesn't get converted to NetASCII's EOL = CRLF because the client only knows about Windows text files (EOL = CRLF).

There's an analogous situation under Linux, which can mount drives having different filesystems including Windows drives. When I try to send a Windows file using the Linux client I have the same difficulty (presumably, although I haven't tried this one).

What's needed is a way to specify which conversions to make when sending ASCII files: CR, LF, and/or CRLF (which is just passed through). I suppose the OS default EOL should always be converted.

And on receiving ASCII files, a way to control what to use for EOL: CR, LF, or CRLF.

Whenever i click the ListView (the server part, and the local part as well), FileZilla crashes with message:

Instruction at address "0x77c3809e" has accessed to memory at address "0x03302000". The memory can not be "written".

OK --- EXIT.

it's a free translation, i got russian windows.

I would like FileZilla to support and use the library features built in to Windows 7 instead of having to navigate to deeply buried folders every time I use FileZilla. It just makes things easier when you are very commonly downloading movies/pics/etc but the folders are not as easy to get to.

Example repro steps:

1) Upload a c# file (foo.cs) to a remote server. 2) On the local machine ensure that Visual Studio is associated with the '.cs' extension (right-click on file, choose 'Open-with->Choose-default program->Visual Studio' 3) Restart Visual studio and close the foo.cs editing tab. 4) Use filezilla to view/edit the remote copy of foo.cs (right-click and select 'view/edit').

Each time you do this, an additional Visual Studio process is opened. (Oddly, foo.cs appears to be opened in both the existing process and the new process.)

By contrast, if you double-click on the local copy of foo.cs from windows explorer, it opens in the existing Visual Studio process,as expected.

Although the recipe above uses Visual Studio, you can see the same behaviour for any application or file-type.

Filezilla help/version info:

FileZilla Client

Version: 3.4.0

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2011-03-27 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 2.10.4

Operating system:

Name: Windows NT 6.1 (build 7601, Service Pack 1) Version: 6.1 Platform: 64 bit system

Filezilla version: 3.4.0

Compiled an executable on linux using:

arm_v5t_le-g++ -o t test.cpp

when I upload the file to an embedded linux system, t is not complete and some of the bytes that is transfered, is not the same as the original ones.

original: size = 93117 bytes remote: size = 92867 bytes

But if I change the name of the file to t.run, then the transfer is ok!

Used ghex to compare original and remote version. It is the same at file start but after a while they differ, so its not just a truncated file transmission.

Attached files:

1) original file: t.original 2) remote file: t.remote

Kind regards, Mattias Aronsson

P.S. Your ftp client is really nice looking! D.S.

FileZilla 3.5.0-rc2

On the manual transfer dialog there is a small cosmetic issue with some error messages shown when the user input is not correct. The messages just have generic title "Message".

In particular the messages shown in CManualTransfer::VerifyServer are affected.

Hello, reporting a bug with the current version of Filezilla (3.5.0) however it was happening in version 3.40 and one versio before that, which I can't tell you what it was.

When uploading a new file (File size doesn't matter) to an FTP site, either dragging through the file manager to the remote file manager, or right clicking on the file and selecting upload, the transfer starts and then then the initial file creation happens, with the name of the file and zero (0) bytes is loaded to the server, and you're prompted with a Windows Popup that states, Target file already exists; It then gives you options and after 15 to 20 seconds, it cylcles and pops up again. This happens multiple times.

I thought I had run out of disk space, I checked the server and there was plenty. I also checked using standard FTP from a command prompt and that worked just fine. As did using IE 8 using the same user credentials.

I know this was working on my system, about 3 weeks ago, when I last uploaded to this server, and I was trying to remember what might have changed, and then it clicked.

To improve security on my system, I created a new Administrator account to logon with should I need to install anything and downgraded the account that I was using from and "Adminsitrator" account to a "Standard" account. This way, if a virus should try and take over my machine, it'll force the system to prompt for the Local Administrator account password.

I changed my account back to an "Administrator" and sure enough, I was able to upload files without any issue.

It seems as though FileZilla requires the local user to have administrative priveledges. I know the problem isn't with my server, as it uploaded fine with Command Line based FTP and IE 8 without issue, even though it was much more cumbersome. When I changed the account to an Administrative account, it worked as expected.

I have Windows Vista Ultimate 64 Bit (Build 6002) 12 GB RAM and a 1.8TB Drive using RAID 5 on the Intel Southbridge Platform.

This isn't a server problem. This a client not having interactive administrative permission's with the OS at some level. I was able to change my account through the user accounts control panel applet to an "Administrator". Exit out of FileZilla and go back in and the problem is resolved.

I'm trying to run as a standard user to prevent virus and malware infections.

I've attached a file with the trace of my upload, shuold that help determine what may be going on. I did the trace with two different files, on that was 2.2K the other was about 150MB.

Please let me know if you need any further information.

When using the Filezilla FTP client with explicit SSL/TLS, the connection to the FTP server is closed without regarding the SSL shutdown that is expected by servers implementing TLS.

Before closing the TCP connection, a correct TLS shutdown should be initiated.

Typical error in vsftp implmenting FTP/TLS: [username] DEBUG: Client "IP", "Connection terminated without SSL shutdown - buggy client?"

Specification for closing TLS connections:

​http://www.ietf.org/rfc/rfc2246.txt 7.2.1. Closure alerts

Correct Behaviour for shutdown is important to ensure TLS' resistance against truncation attacks.

You HAVE to change the keyboard shortcut for downloading/ uploading files from Command+down_arrow to something else! This is a standard shortcut for entering lower directories in the Mac OS. It's absolutely crazy to use this for anything else. I hope you can change this in the upcoming release!

Using version 3.5.0 of Filezilla

I think that functionality of filters button should be changed around. I have mouse buttons and respective button actions in mind.

Standard GUI behaviour ====================== LMB: Default action, usually quite simple and straightforward RMB: Additional and feature complete means to manipulate with given object

FZ Filters button - now ================= LMB: Displays option dialog for filters with lots of settings RMB: Turns filters on and off

FZ Filters button - should be ================= LMB: Turns filters on and off RMB: Displays additional and feature complete options for filters

Take Compare Button as an example, that one is implemented correctly.

Proximity of these two buttons along with their similar function but inconsistent behaviour makes them ergonomical nightmare as user needs to try what will actually happen when he l/r clicks one of buttons.

I use these buttons almost constantly and still don't intuitively remember what will happen if I left click the filter button.

This is not an improvement. I'll reinstall the old version until this gets changed.

It would be nice to be able to use well-known interaction patterns from web browsers. Middle-clicking (and Ctrl-clicking) items in the Site Manager split-button drop-down should open new connection in new tabs.

It would also be good to update the 'Already Connected' current/new tab dialog to use two large buttons for the options.

related: #5605, #7366

I searched, but didn't see that this has been previously requested...should be fairly easy to implement...

Request: Provide a command line option to force FileZilla to bring up a password or login dialog before connecting to URL specified on the command line.

Reason: I have a need to, and suppose others do to, for being able to launch FileZilla from a script, directing it to a certain URL, "protocol://username@site/subdirectory", and then asking for a password. For many good reasons, I do not want to plain-text the password within the script, nor do I want to ask for or include it on the command line. Instead, I would like a way to have FileZilla start-up and ask for the password prior to connecting to the URL/site.

This might best be implemented generically as a command line option that brings up a login dialog, asking for username and password, with username already filled in if it was specified on the command line.

Hi,

i have many connections to different server, with the same credentials (ldap / active directory). So when i change my monthly password, this is kinda cumbersome to change every password on every connection.

What i would propose is a new "global Account" LoginType, where a global setup of username & password could be reused in every connection. This only needs to be setup / changed once, working for all connections.

tia, Myron

I'm using filezilla 3.5.0 to connect to an ftp server which is also used as a ms windows remote drive, thus file encoding must be the one used by the windows "remote mount" dialog (where it cannot be configured).

Since the machine is used by German locale clients, the right encoding is "Cp850", and up- and downloading using this configuration works with files containing e.g. umlauts.

Filezilla however displays nerve-wrecking error pop-ups "cannot convert from the charset Cp850", which is simply wrong.

Improved log window suggestions: New Tab - Bigger Text/List Box Date + Time stamps on messages - would like to see the time certain events took place. Log Filter - Search or filter for certain events Event Triggers - Trigger event/color/action if certain event took place

When I export my ftp sites to xml file with the site manager,I need to export some of the sites to an xml file,but I can only export one site or export all sites.Is it possible to provide a multiselect function like that I could hold my CTRL key down and select some sites,and right click my mouse,export the selected sites to an xml file.

Thank You.

If you have a lot of server in the servermanager (e.g.>100), and you use the small arrow right to the servermanger button, you get a list, that don't fit on the screen. It took long time to navigate to serverentries at the bottom of that list.

It woult be perfect, to get a list like the windows start menu, that list the entries in rows next to each other, when the list became to long.

I'm updating Joomla manually with FileZilla and backup every overwriten file. The update is provided as zip-file with updated files.

It would be very useful if there were a function like "backup original to local folder and then overwrite it". (so just like I do: check the update-package for files and copy everyone to PC, then overwrite with package).

Thanks for FileZilla,

ACCakut

I have found that filezilla overwrite remote file without prompt confirmation occasionally. Restarting the program will make it become normal.

FileZilla version: 3.5.0. O/S type & version: Windows Vista SP2 x64

It is WAY too easy to delete the history on the quickconnect bar by mistake. The clear button is only a millimeter away from the quickconnect button. I've done this several times now and it is really frustrating. Please rearrange options.

Friend's wasting her time with finding cracked SmartFTP cuz FZ lacks features like tabs which doesn't change both local & remote views along with diff' Server.

I'm using FileZilla 3.5.0 on Ubuntu 11.10 dev. If I open a file from a server and save the modified content the window that askes me to upload the file appears after ~5-10 seconds. The problem is that this action forces FileZilla to be the first window. The active application (here the text editor) is moved behind FileZilla which is very annoying.

When uploading a folder with files of size 500MB to 5GB, FileZilla hangs as it gets to the end of the uploaded file, waits a minute or so, then restarts and clobbers the fully uploaded file and starts again.

Here's the part of the FileZilla log showing a file being uploaded successfully, then clobbered. [I have trimmed out the actual names and ip addresses, that's all].

Status: Connected Status: Starting upload of C:\Users\....\Documents\....\MVI_0113 Program in Livingroom continued.MOV Command: CWD /../for upload Response: 250 Commande CWD exécutée avec succès Command: TYPE I Response: 200 Type paramétré à I Command: PASV Response: 227 Entering Passive Mode (94,23,29,129,133,163). Command: STOR MVI_0113 Program in Livingroom continued.MOV Response: 150 Ouverture d'une connexion de données en mode BINARY pour MVI_0113 Program in Livingroom continued.MOV Response: 226 Téléchargement terminé Status: File transfer successful, transferred 4,294,358,511 bytes in 29346 seconds Status: Starting upload of C:\Users\....\Documents\....\MVI_9546 Carl thanks everyone.AVI Command: PASV Response: 227 Entering Passive Mode (94,23,29,129,150,10). Command: STOR MVI_9546 Carl thanks everyone.AVI Status: Resolving address of xxxx.com Status: Connecting to 94.xx.xx.xxx:21... Status: Connection attempt failed with "ETIMEDOUT - Connection attempt timed out". Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of drive40-dotspirit.com Status: Connecting to 94.xx.xx.xxx:21... Status: Connection attempt failed with "ETIMEDOUT - Connection attempt timed out". Error: Could not connect to server Error: Disconnected from server: ECONNABORTED - Connection aborted Error: File transfer failed after transferring 879,786,140 bytes in 7201 seconds Status: Resolving address of drive40-dotspirit.com Status: Connecting to 94.xx.xx.xxx:21... Status: Connection established, waiting for welcome message... Response: 220 ProFTPD 1.3.3d Server (DotSpirit.com FTP) [::ffff:94.xx.xx.xxx] Command: USER carl90 Response: 331 Mot de passe requis pour carl90 Command: PASS * Response: 230 Utilisateur carl90 authentifié Status: Connected Status: Starting upload of C:\Users\....\Documents\....\MVI_0113 Program in Livingroom continued.MOV Command: CWD /../for upload Response: 250 Commande CWD exécutée avec succès Command: TYPE I Response: 200 Type paramétré à I Command: PASV Response: 227 Entering Passive Mode (94,23,29,129,129,180). Command: STOR MVI_0113 Program in Livingroom continued.MOV

Hello,

At first, big thanks for FileZilla Client!, it's best *FTP* Client for me.

My request:

Please add a function calculate a md5sum's from selected local files and next I can send a md5's to a server.

Function like RMB on org.file and from content menu select 'calculate org.file.md5 & send it'.

Best Regards Marcin Przysowa

Filezilla 3.5.0

If you take a file from a remote server and you want to put it locally with doag and drop i can do the action like in windows.

All the version of FileZilla that i have used have this problem on OSX I think is great to solve it.

It would be a great help if there was a "locate on disk" option on the right click menu for local files. Sometimes I generate a file I then need to copy/email etc and it takes a few more steps to open explorer, get to the right server... This would cut out a step.

For an example of how this works take a look at Google's Picasa

Thanks

1 - I dont like to store my AD password in any application.

2 - At the office our AD passwords are changed every 40 days. 'Some' people forget they have their id/password setup in filezilla and end up locking out their account from retries with an old pass.

It would be nice if filezilla had a checkbox here where it would ask for PROXY ACCNT PASSWORD - I'm not refering to 'remote site pass' as you already have an 'ASK' option for that.

Overall .. great app keep up the great work.

Some, but not all FTP sites have been setup on the proxy as 'no-auth required' sites for various reasons.. some apps (mainframe) cant handle proxy auth. It would be nice to have an option to 'use custom ftp proxy without auth' I still need filezilla to know the format the proxy will accept the creds but the proxy its self bombs out if you pass creds to it when the site is a 'no-auth' site.. I would think this option would go next to the option of 'dont use proxy' for this site but would be an additional box that said use custom ftp proxy without auth? There are options to re-write how the proxy rules work but seems like there is no option in the client to do what I'm asking. I cant even set the custom proxy up without a login/pass for a 1 time use test..

When I have toggled synchronized browsing on in site preferences and I click on reconnect to last used server, synchronized browsing is not toggled on (maybe another preferences too). When I connect to this server using Site manager, synchro-browsing is toggled on properly.

I have noticed slow cold startup times (e.g. 15-60 seconds) for FileZilla on several computers. During startup, the hard drive is constantly being accessed. Therefore, I ran Sysinternals' Process Monitor to debug the issue.

I found that the majority of the startup time appears to be spent querying the Windows Cookies folder: C:\Documents and Settings\USERNAME\Cookies The query takes a long time when you have a lot of cookies in the folder (e.g. hundreds or thousands). I have over 3000.

Obviously, I could clear the Cookies folder to work around the issue. However, users shouldn't have to clear their Internet Explorer/Windows cookies to obtain reasonable FileZilla startup performance.

Furthermore, I'm not sure why FileZilla is querying that folder at all. I took a quick look at the source code and couldn't see any reference to the Cookies folder. Perhaps some API/library used by FileZilla is doing the deed.

If necessary, I suspect the issue can be reproduced by placing a few thousand small files in the Windows Cookies folder and rebooting to ensure the directory is not cached by Windows.

This issue may explain some of the reports in Ticket #3267. I created this new ticket because most people in that discussion seemed to think that network drives were at fault.

Please let me know if you require any additional information. Thanks!

Running: -FileZilla Client 3.5.0 -Athlon II X4 640

case: filezilla 3.5, ssh connection, uploading whole directory

It seems that filezilla improperly handles the response to the SSH_FXP_REALPATH command. According to the ssh drafts the server can reply with the the SSH_FXP_STATUS upon failure (Specified file path is invalid. reason=2; File not found reason=2) and from then on it is client responsibility to act upon those responses.

Server side responses:

Sending SSH_FXP_STATUS: : /00149642: Specified file path is invalid. reason=2

Sending SSH_FXP_STATUS: : File not found reason=2

Usually when a directory does not exist on the remote server, the client will receive such error message and then should issue the make directory.

Attached is the filezilla log in debug mode.

I find that when I upload a file to any server the Preserve timestamps of transfer file do not work in ver 3.5. When I test using other ftp program to the same site it is ok. please check

I downloaded filzilla today. I followed some tutorials and read a few forums about using filezilla. I am unable to see any files on my pc or my server to upload. I also enabled in the debug window "Show raw directory listing", still nothing viewable ! And I am unable to delete any files on my server ! Please look at my screen shots here

Please contact me at n e b l e n d e r @ g m a i l . c o m

Description: Hostnames associated with a saved putty session are used if the hostname used to connect in Filezilla matches the putty session name. In other words: fzsftp.exe loads the hostname to resolve from a putty session that happens to matches the hostname that was originally supplied to it.

Steps to reproduce:

1. Create a putty profile named "foo", with hostname "foobar"
2. Create a Filezilla SFTP site profile with hostname "foo" (name can be anything)
3. Enable debug output.
4. Initiate a connect to your filezilla site.

Output:

Command: open "anonymous@foo" 22
Trace:   psftp: Implicit session load.
Trace:   Looking up host "foobar"
Error:   ssh_init: Host does not exist

Result: It attempts to resolve "foobar" Expected result: It should resolve "foo"

Comment: This is perhaps acceptable behaviour for psftp when using from the command line, but is unexpected behaviour for Filezilla.

Hallo,

i found in the directory FileZila on a MS Windows Desktop PC the file recentservers.xml and if i open this file, then i can read my pasword in clear code.

I think, it is verry dangerous to save paswords in xml-files in a clear code.

Perhaps it is possible to save this pasword encoded?

Thanks

It would be beneficial to download and user interaction response times if FileZilla could reuse the browsing connection (the first connection made and browsed with) to initiate file transfers, and open a second connection to resume browsing until the transfers have completed.

This arose from my use of a ssh+ftp connection which has very quick transfer times but was very slow to establish connections. With this connection policy/option available a simple two-file grab could be much quicker, and by automatically opening a connection before the user browses to the next directory you minimize overall delays experienced by the user.

It would be nice to have FileZilla support a proxy command for sftp. I use the ProxyCommand option in my ~/.ssh/config file to be able to connect to hosts I would otherwise not be able to reach. And while I could try to set up a tunnel some other way outside of FileZilla, that tends to be more of a nuissance.

Ideally, if FileZilla could read my ~/.ssh/config file and take advantage of the hosts and settings I had set up in there, it would be a nice thing to have.

Currently, the My Documents folder is mapped to a network folder via a UNC path:

\\Vickymini\vicky_mini\Users\Tech_Support\Ken_Haberman\My Documents

When selecting "My Documents" in the local directory tree list, the program displays my local folder instead:

C:\Documents and Settings\ken_haberman\My Documents

It takes a few tries of clicking on "My Documents" before it shows the mapped network. Sometimes I have to open the tree to the network folder to get to it.