Custom Query (2164 matches)

The logon type in all my sites has suddenly changed to "Ask Password" (they all were "Normal") and if I try to change any of them to "Normal" I get this error message:

"FileZilla is running in kiosk mode. The 'Normal' and 'Account' logontypes are not available in this mode".

Whatever the "kiosk mode" is, I haven't chosen it; I haven't done anything to use this mode. If some condition has changed that somehow requires to switch to this mode for whatever reason, I should have received a warning, together with instructions to switch back to the original mode.

The funniest thing is that Filezilla was already running and I had already connected to several sites which had "Normal" logon type, and now, within the same session, I get this error message.

Additionally, FZ is exhibiting another stupid behavior: I had a site already and open, to which connection had been lost. If I click the "refresh" button, it should either reconnect (it was still set to normal logon type when I connected) or prompt me to insert the password (since it has changed to 'ask password' in the meantime); but doing absolutely nothing is not an acceptable behavior.

In welcome dialog we have these link texts:

"Asking questions in the FileZilla forums" "Reporting bugs and feature requests" "Configuring FileZilla and your network"

I suggest changing them to: "Ask questions in the FileZilla forums" "Report bugs and feature requests" "Configure FileZilla and your network"

"Ask questions in the FileZilla forums" could maybe just be "FileZilla forums".

It seems in the forum "FileZilla Forums" is written with big F in Forums so maybe change that to so they are the same.

A small improvement:

A LEFT ARROW and a RIGHT ARROW between the 2 panes would allow transfer of data in either direction. The would greatly simplify data transfer. (The older Firefox versions which supported FTA had this feature.)

Thanks for your excellent product. M....

Hi folks, 1st of all, nice to meet you all, and congratulations for the amazing tool.

I'd like to leave a suggestion to have in the menu FILE the latest opened files. It would list the last 10 or more files (configurable in the settings). So, if I click on it on the menu FILE, it sends me to the file/folder in the REMOTE SITE (SERVER).

Thanks in advance and keep the amazing work.

In other software that have the ability to rename files (photo organizers like Thumbsplus, for example), when you choose to rename a file the default portion of the filename selected is the name excluding the extension. This avoid changing the extension by mistake and, honestly, speeds up the renaming process since most of the times only the name is meant to be changed.

First, thanks to all the contributors of Filezilla for this great and easy-to use tool.

I have one feature suggestion. Filezilla offers different options to handle the case when a target file already exists. Probably the most commonly used one is to skip the transmission of files if source and target have the same date and/or size. In the recent version, the FTP log pane at the top of the screen shows for each file whether it was downloaded or skipped.

It would be advantageous to display this information also in the "Successful transfers" tab of the bottom pane.

Suggestion how to realize:

• add a column named "Status"
• for each file, display the status; at least "Downloaded" or "Skipped"; or, if data available, even more options e.g. "Overwritten", "New", "Skipped"

Thank you very much in advance for considering this feature request.

In the "Local site:" and "Remote site:" path textboxes, it would be very helpful to support the commonly used Ctrl-backspace combination to backspace an entire word, and Ctrl-shift-backspace to highlight an entire word.

Other clients I've used supported this and I find myself typing it a lot. It wouldn't be so bad if typing that combination didn't insert a strange extended character that is represented (on my system; Windows XP) as a hollow rectangle.

it would be nice if the filezilla server gets a crc checker for sfv oder md5 files - if something (files or dirs with a sfv-file for example) is uploaded to the ftp-server it could be checked and marked as ok oder bad or missing so.

Filezilla will not work through Microsoft ISA Server with NTLM authentication required.

Mozilla, including Mozilla FireFox does support NTLM auth for the HTTP proxy, so the code could be taken from there.

There is also a Python program APS that will work. It belongs here: ​http://www.geocities.com/rozmanov/ntlm/

It references a description of the protocol here: ​http://www.innovation.ch/java/ntlm.html

OpenSSH support client certificates signed by some CA (not X.509-Certificates, but their own simpler form). These certificates are great because they when created with a short validity time they can function as a temporay access token for servers. This makes handling a large number of servers and users on these servers very easy.

The certificates are described at ​http://cvsweb.openbsd.org/cgi-bin/cvsweb/src/usr.bin/ssh/PROTOCOL.certkeys?rev=HEAD and should be easy to implement in the protocol, according to the putty devs (​https://www.chiark.greenend.org.uk/~sgtatham/putty/wishlist/ssh2-openssh-certkeys.html). I don't share their opinion that the ppk files need to be updated, but the gui should just add a field where the cert file can be added and together with a pkk file containing the key the client has all information it needs to connect to a server.

The absence of any free Windows SCP client supporting OpenSSH certificates is the only thing currently stopping me from rolling out this feature in our organization. We are willing to donate 500$ if someone finds the time to implement that.

When using a UNC path for local files, the “Local site:” box will accept and show the current path, but the server node and directory tree does not appear within the local tree pane. This means that you cannot explore the local directory structure or move files between local directories.

I would expect the server to appear as another node in the tree, either at the same level as local drives, or at the same level as Desktop, and a chain of directory nodes up to the working directory.

On five-button mice (e.g. Logitech Laser MX400, Microsoft IntelliMouse Explorer, IntelliMouse Optical and Comfort Mouse 4500) there are additional buttons on the left (IME, MX400) or either side (IMO, 4500) that by default function as Back and Forward in major browsers and other software.

I'd like to see FileZilla adopt Outlook 2003's behaviour where these mouse buttons cycle through your folder history. For example, in Outlook, if I press mouse 4, I'm taken to the previous mail folder that I was in, with the last message I viewed in that folder highlighted. When working with synchronised browsing in FileZilla and multiple folders, this could prove a very handy way to switch between several folders.

At present, mouse 4 is configured to go to the parent directory of the working directory, which does not match any expected behaviour of mouse 4. For example, the Back/Forward mapping of these buttons is supported out of the box with Windows XP, without any additional mouse drivers; likewise, out of the box support for Firefox, Thunderbird (previous/next message in history), Outlook (previous/next mail folder in history), Internet Explorer and Opera among others.

Mouse 5 appears to do nothing at all.

A setup-less server would be great, all bundled inside a zip. The server should run like a normal application, not a service.

What do you think?

It would be great if Filezilla supported wxWidgets 3.2 which has now been released. We would like to move to wx 3.2 in Fedora and Debian.

FileZilla 3.5.1 Mac OS X 10.6.8

When I change a remote symlink via SSH, it is not being updated in FileZilla's remote window. In fact, the symlink is still leading to a directory that doesn't even exist anymore (and actually displays its contents), so it seems a cache issue or something. Upon restarting the client, the symlink works, making this a very low-priority bug.

I have verified that the symlink is correct in the shell.

When transferring a file that already exists onto the server, in the "target file already exists" dialog. It would be very convenient to have an additional action called "Overwrite and Sync" which would monitor the local file that was uploaded and whenever it's modified it will be automatically transferred back to the server. I know there are existing sync features but this would just be a per-session sort of tracking/syncing.

Just a minor thing, but it'd be really useful if when resizing the panes, the left and right both changed together. Especially when trying to synchronise things, it's helpful to have things lined up, and I regularly find myself adjusting the height of the left browser pane and then trying to adjust the right side to match. I think most people would want them to remain aligned, so that should be the default action. There might be odd cases where having them different heights would be useful, but perhaps that could be catered for by holding down the Shift key. I.e. When moving the horizontal divider, move both equally -- unless Shift is pressed.

Everytime a connection is started the sync folder option must be set again. It would be very good to include a preset for this in the options.

There is a bug on the Linux version of Filezilla Client that if there is a directory called "sync" in either the local or remote site, it will mess up the synchronized browsing for all directories/files listed after the "sync" directory".

I can provide more details if necessary (screenshots, etc).

I use a Mac, although the company LAN is Windows-based. There are several shared servers on the LAN, one of which contains our local site.

If I have not previously connected to the local server from Finder, Synchronized Browsing will fail in FileZilla. What I mean by fail is - when I open the Site Manager, select a bookmarked folder within the site, and click "Connect", the remote site's files are shown on the right, but the local site file path on the left remains stuck at the Mac's home folder.

The only way to prevent this is to manually connect to the local site server by navigating to one of its folders in Finder first, before attempting to connect with FileZilla. It seems that FileZilla is unable to initiate a connection, only look for an existing connection. And no user feedback is given to indicate when connection to the local site server is unsuccessful or why.

During an upload (or download?), mostly on quick 1 file uploads), you are allowed to navigate the local file tree. When the upload is completed, the selected directory is updated on the ftp server side, but the local side does not update and remains. causing you to have to selected a different directory, then going to the one you wanted.

I am not sure if this is a synchronized issue, or a file-zilla bug, because the remote side does update correctly.

Windows XP Professional SP2

I have several sites in Site Manager all of which have Synchronized Browsing set. Regardless of which site I select, the server is correctly accessed but the local folder remains unchanged (ie it stays as the last folder accessed even when Filezilla exited and restarted). Synchronized Browsing remains not set in View menu.

No errors of any kind in message log (addresses removed):

Resolving address of ftp.xxxxxx Status: Connecting to xx.xx.xx.xx ... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Logged in Status: Retrieving directory listing of "/"... Status: Directory listing of "/" successful

Hi

Submitted when using FileZilla 3.3.4.1 on OSX 10.5 but I think this is the same on Windows.

Action: Select a remote site folder that does not exist in the local site (with synchronized browsing on)

Result: A Synchronized browsing dialog appears with "%File Path% does not exist or cannot be accessed. Disable synchronized browsing and continue changing the remote directory? [Yes|No]"

Expected: A dialog appears with "%File Path% does not exist in the local site. Would you like FileZilla to create the folder and continue? [Yes|No]". Yes creates the folder and opens it synchronised. No does nothing and leaves the user to decide what to do.

Equally...

Action: Select a local site folder that does not exist in the remote site (with synchronized browsing on)

Result: No message dialog but an error in the log with "Error: Failed to retrieve directory listing"

Expected: A dialog appears with "%File Path% does not exist in the remote site. Would you like FileZilla to create the folder and continue? [Yes|No]". Yes creates the folder and opens it synchronised. No does nothing and leaves the user to decide what to do.

all the best Dave

When I have toggled synchronized browsing on in site preferences and I click on reconnect to last used server, synchronized browsing is not toggled on (maybe another preferences too). When I connect to this server using Site manager, synchro-browsing is toggled on properly.

I am running filezilla at Debian Bookworm (testing). On startup I use the option "Restart tabs and reconnect". Filezilla then shows the files of the local and remote (sub)directories, that were active at the previous exit of filezilla. This is a nice feature because often more than once files from the same subdirectory are changed.

Unfortunately at the reconnect the option "synchronized browsing" is not activated, although this option is set for the site. This option only seems to be automatically activated, if the site is manually connected using the site-manager at the default local and remote root-directory, but you almost never want to be at this directory.

This problem exists at filezilla-3.52.2, filezilla-3.53.1 and filezilla-3.57.0.

The "synchronized browsing"-option is a very important option, because it avoids, that files are transported to the wrong directory.

If you forget to set the option and change directory without noticing this, the website will not work anymore.

So it is not only annoying to set the option each time at a reconnect, it also causes an unneeded risk of a not working website.

A weak property of this solution is that at a reconnect "synchronized browsing" also is set if the local and remote path are not in sync, because at the previous session "synchronized browsing" was disabled by the user. But this is general behavior of filezilla, which never checks, that the directories really are in sync, when the user sets the option.

I send a simple, validated patch for filezilla-3.57.0 (8 lines) which always sets the option at a "Restart tabs and reconnect" or by reconnect-button, if this option is specified for the site.

The patch-logic is also validated at filezilla-3.52.2, which was the current filezilla-release at Debian Bullseye.

I think this patch causes a more logical and user-friendly implementation of the "synchronized browsing" option for the site, avoiding unnecessary mistakes with downloads.

FileZilla client version 3.4.0, on Mac OS X 10.6, Intel Core 2 Duo.

Synchronized browsing is on, directory comparison is on. Look at a directory with many files, so there are scroll bars in the listing directories. Now scroll one of listing, either local or remote. The other one does not scroll. (On Windows the listings scroll in sync.)

In the past, pressing TAB moves through all fields shown when connected to a remote server--local and remote address, directory tree and file list, log, etc. After installing 3.63.2.1, TAB now gets stuck in the log pane, but if the mouse pointer is clicked in any of the directory windows, TAB will move through the remaining fields on the screen until the log pane is reached, then lock there.

UPDATE:

Removing the Message Log via the View menu from a live connected session solves the problem.

RFC 5246 which defines the TLS 1.2 protocol added a new optional extension to the ClientHello handshake message. This is detailed in section 7.4.1.4.1. of the RFC. If this extension is included in the ClientHello, it must contain all of the signature algorithms that the client is willing to accept. Here is a quote: "If the client supports only the default hash and signature algorithms (listed in this section), it MAY omit the signature_algorithms extension. If the client does not support the default algorithms, or supports other hash and signature algorithms (and it is willing to use them for verifying messages sent by the server, i.e., server certificates and server key exchange), it MUST send the signature_algorithms extension, listing the algorithms it is willing to accept." The list sent by FileZilla Client 3.6.0-rc1 includes these in its preferred order: SHA384/RSA, SHA384/ECDSA, SHA512/RSA, SHA512/ECDSA, SHA256/RSA, SHA256/DSA, SHA256/ECDSA, SHA1/DSA, and MD5/RSA. This list is conspicuously missing SHA1/RSA. This should be added. If you are considering a response (see ticket #7864) of "We don't support SHA1 anymore", I would point out that SHA1/DSA in included in this list, as well as MD5/RSA. If you are considering a response of "SHA1/RSA is the default, we don't need to specify it", I would point out that according to the RFC (see quote above) if the extension is used, it must list all supported signature algorithms--also, SHA1/DSA is included, and it is a default accoring to the RFC if the extension is not used. The bug fix is to include SHA1/RSA in the signature extensions.

Hi,

the Debian pakage from Filezilla 3.5.3 and the version from the filezilla website does have this bug. Im not sure but its possible that it had somesthing to do with TLS Negotation (or Renegotation).

Version 3.2.7 works fine, with the same settings.

FTP Server is ProFTPd with various different TLS settings ( I tried everything... )

Hello, I need help with our updated version, because we're having an issue with transferring file - giving us "Elapse error" stuck @9.98% Please give us a call to assist us @323-957-3340 or 800-545-0999 Hours 8-5pm pst

I send my recordings daily and this is causing a major issue and delaying my business. I can't find answer on forum.

-Pablo Carrillo

For better accessibility to blind people, could you add the Tab and Shift+Tab shortcut to move between elements of FZFtpServer interface's main window (log and connected people list)?

When tab'ing through the tab order, the tab gets on QuickConnect and will not tab off of it.

Tab order goes Host: Username: Password: Port: Quickconnect (Down Arrow) Quickconnect [gets stuck here and can not come off of it]

Some users can only access their files via FTP and don't want to waste bandwidth downloading log files which can be MBytes in size every few minutes.

How about a mechanism to tail a file? Right-click and select "tail", which would open up a resizable window that would constantly show the last x lines of the file. It would use the same login settings that it used to get in via FTP. I would use this *all* the time.

(Example for a perl script: ​http://hamstersoup.wordpress.com/2006/05/12/ftptail/ )

When trying to upload/download a file, we get the "Target file already exists" error. The new file is created in the destination folder, with a future time and the file is not actually transferred. The destination file then shows the file with no filesize. This error just started happening yesterday. Several days after our latest update. Version info included in attached pictures.This is critical as we are a (Building Dept) government agency) that uses this a medium to transfer documents to/from clients

, , , ,

Hello, reporting a bug with the current version of Filezilla (3.5.0) however it was happening in version 3.40 and one versio before that, which I can't tell you what it was.

When uploading a new file (File size doesn't matter) to an FTP site, either dragging through the file manager to the remote file manager, or right clicking on the file and selecting upload, the transfer starts and then then the initial file creation happens, with the name of the file and zero (0) bytes is loaded to the server, and you're prompted with a Windows Popup that states, Target file already exists; It then gives you options and after 15 to 20 seconds, it cylcles and pops up again. This happens multiple times.

I thought I had run out of disk space, I checked the server and there was plenty. I also checked using standard FTP from a command prompt and that worked just fine. As did using IE 8 using the same user credentials.

I know this was working on my system, about 3 weeks ago, when I last uploaded to this server, and I was trying to remember what might have changed, and then it clicked.

To improve security on my system, I created a new Administrator account to logon with should I need to install anything and downgraded the account that I was using from and "Adminsitrator" account to a "Standard" account. This way, if a virus should try and take over my machine, it'll force the system to prompt for the Local Administrator account password.

I changed my account back to an "Administrator" and sure enough, I was able to upload files without any issue.

It seems as though FileZilla requires the local user to have administrative priveledges. I know the problem isn't with my server, as it uploaded fine with Command Line based FTP and IE 8 without issue, even though it was much more cumbersome. When I changed the account to an Administrative account, it worked as expected.

I have Windows Vista Ultimate 64 Bit (Build 6002) 12 GB RAM and a 1.8TB Drive using RAID 5 on the Intel Southbridge Platform.

This isn't a server problem. This a client not having interactive administrative permission's with the OS at some level. I was able to change my account through the user accounts control panel applet to an "Administrator". Exit out of FileZilla and go back in and the problem is resolved.

I'm trying to run as a standard user to prevent virus and malware infections.

I've attached a file with the trace of my upload, shuold that help determine what may be going on. I did the trace with two different files, on that was 2.2K the other was about 150MB.

Please let me know if you need any further information.

Something like a temporary recycle bin would be really nice. So if you delete an very important file like "my_file.php" which is only about 15 kb big but contains dozens of hours of work, the file would be downloaded to a temporary folder on your pc before removing it from the server.

So in the settings of FileZilla you could customize this feature like this way:

"Download files temporarily before removing from server []" and "Maximum file size for files to be temporarily downloaded on your pc before removed from the server" ... or something like this.

When I click on the Site Manager icon, then click on any site that has "use synchronized browsing" checked, I get the error message "Current remote directory (whatever) is not below the synchronization root. Synchronized browsing has been disabled." (yes it does say "not below").

Then, if I click on the synchronized browsing toggle icon, synchronization works fine.

Here is the message log: Connecting to 168.144.87.128:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 1 of 50 allowed. Response: 220-Local time is now 14:36. Server port: 21. Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Trace: CFtpControlSocket::SendNextCommand() Command: USER ws Trace: CFtpControlSocket::OnReceive() Response: 331 User ws OK. Password required Trace: CFtpControlSocket::SendNextCommand() Command: PASS Trace: CFtpControlSocket::OnReceive() Response: 230 OK. Current restricted directory is / Trace: CFtpControlSocket::SendNextCommand() Command: SYST Trace: CFtpControlSocket::OnReceive() Response: 215 UNIX Type: L8 Trace: CFtpControlSocket::SendNextCommand() Command: FEAT Trace: CFtpControlSocket::OnReceive() Response: 211-Extensions supported: Response: EPRT Response: IDLE Response: MDTM Response: SIZE Response: MFMT Response: REST STREAM Response: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; Response: MLSD Response: AUTH TLS Response: PBSZ Response: PROT Response: TVFS Response: ESTA Response: PASV Response: EPSV Response: SPSV Response: ESTP Response: 211 End. Status: Server does not support non-ASCII characters. Status: Connected Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: Measured latency of 129 ms Status: Retrieving directory listing... Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: CWD /www/sites/all/modules/rcredits Trace: CFtpControlSocket::OnReceive() Response: 250 OK. Current directory is /public_html/sites/all/modules/rcredits Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/public_html/sites/all/modules/rcredits" is your current location Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: TYPE I Trace: CFtpControlSocket::OnReceive() Response: 200 TYPE is now 8-bit binary Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (168,144,87,128,16,156) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: MLSD Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Accepted data connection Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::OnReceive() Response: 226-Options: -a -l Response: 226 49 matches total Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Connecting to 168.144.87.128:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 2 of 50 allowed. Response: 220-Local time is now 14:44. Server port: 21. Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Trace: CFtpControlSocket::SendNextCommand() Command: USER ws Trace: CFtpControlSocket::OnReceive() Response: 331 User ws OK. Password required Trace: CFtpControlSocket::SendNextCommand() Command: PASS Trace: CFtpControlSocket::OnReceive() Response: 230 OK. Current restricted directory is / Status: Server does not support non-ASCII characters. Status: Connected Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: Measured latency of 127 ms Trace: CFtpControlSocket::OnReceive() Response: 421 Timeout - try typing a little faster next time Trace: Unexpected reply, no reply was pending. Trace: CRealControlSocket::OnClose(0) Error: Connection closed by server Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Trace: CFtpControlSocket::OnReceive()

The Keyboard Shortcut 'Alt-H' has two targets: Host and Help

On my system (Win10) only Host is targeted, I am unable to open the Help menu using the Alt-H shortcut.

The login type is set to interactive (for two factor authentication). The maximum number of connections under transfer settings is set to 1. Despite that, FileZilla opens 3 connections when I drag and drop a directory to download it. This only happens in the Windows version, the Mac version is fine.

Log:

Status: Connecting to xxxxxx:2222... Status: Using username "yyyyyy". Status: Connected to xxxxxx Status: Retrieving directory listing... Status: Listing directory /home/yyyyyy Status: Directory listing of "/home/yyyyyy" successful Status: Retrieving directory listing of "/home/yyyyyy/test"... Status: Listing directory /home/yyyyyy/test Status: Directory listing of "/home/yyyyyy/test" successful Status: Retrieving directory listing of "/home/yyyyyy/test"... Status: Directory listing of "/home/yyyyyy/test" successful Status: Connecting to xxxxxx:2222... Status: Connecting to xxxxxx:2222... Status: Retrieving directory listing of "/home/yyyyyy/test"... Status: Listing directory /home/yyyyyy/test Status: Directory listing of "/home/yyyyyy/test" successful Status: Using username "yyyyyy". Status: Using username "yyyyyy". Status: Connected to xxxxxx Status: Starting download of /home/yyyyyy/test/file0 Status: File transfer successful, transferred 104,857,600 bytes in 1 second Status: Starting download of /home/yyyyyy/test/file6 Status: File transfer successful, transferred 104,857,600 bytes in 1 second Status: Starting download of /home/yyyyyy/test/file2 Status: Connected to xxxxxx Status: Starting download of /home/yyyyyy/test/file3 Status: File transfer successful, transferred 104,857,600 bytes in 1 second Status: Starting download of /home/yyyyyy/test/file7 Status: File transfer successful, transferred 104,857,600 bytes in 2 seconds Status: Starting download of /home/yyyyyy/test/file1 Status: File transfer successful, transferred 104,857,600 bytes in 2 seconds Status: Starting download of /home/yyyyyy/test/file4 Status: File transfer successful, transferred 104,857,600 bytes in 2 seconds Status: Starting download of /home/yyyyyy/test/file5 Status: File transfer successful, transferred 104,857,600 bytes in 8 seconds Status: Starting download of /home/yyyyyy/test/file9 Status: File transfer successful, transferred 104,857,600 bytes in 2 seconds Status: Starting download of /home/yyyyyy/test/file8 Status: File transfer successful, transferred 104,857,600 bytes in 2 seconds Status: File transfer successful, transferred 104,857,600 bytes in 3 seconds Status: Disconnected from server Status: Disconnected from server Status: Disconnected from server

The file is processing a queue for OneDrive and closes. When the application is processing a list of files, including images, documents, psd/psb files, the application closes. Files range in size from small to 1GB files. Suddenly it closes for no reason.

FileZilla Pro

Version: 3.66.2 Registration: Registered

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2023-10-31 Compiled with: x86_64-w64-mingw32-gcc (GCC) 12-win32 Compiler flags: -O2 -g -Wall -Wextra -Wno-deprecated-copy -ffunction-sections -fdata-sections -Wno-cast-function-type

Linked against:

wxWidgets: 3.2.1 SQLite: 3.39.4 GnuTLS: 3.8.1

Operating system:

Name: Windows 11 (build 22635), 64-bit edition Version: 10.0 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi bmi2 adx lm Settings dir: C:\Users\----\AppData\Roaming\FileZilla\

I am on MacOS 10.2.3. Whenever I try to run the installer I see "The application “FileZilla-Installer” can’t be opened." I've tried multiple times through different browsers on two different computers and over different networks with the same result each time.

Since the last update, the names of the local and remote directories are unreadable because they are written in black on black background.

But it becomes readable when I put the cursor in the input field or when I unroll the list.

FileZilla Client

Version: 3.62.2

Build information:

Compiled for: x86_64-apple-darwin22.1.0 Compiled on: x86_64-apple-darwin22.1.0 Build date: 2022-11-22 Compiled with: Apple clang version 14.0.0 (clang-1400.0.29.202) Compiler flags: -O2 -g -Wall -Wextra -pedantic -O2 -g -Wall -Wextra -pedantic -mmacosx-version-min=10.13.0 -Werror=partial-availability

Linked against:

wxWidgets: 3.2.1 SQLite: 3.39.4 GnuTLS: 3.7.7

Operating system:

Name: macOS High Sierra Version 10.13.6 (assemblage 17G14042) Version: 10.13 CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 aes pclmulqdq lm Settings dir: /Users/mfayet/.filezilla/

Example: displayed /Work/Êëèåíòû instead of /Work/Клиенты

Please, fix this little bug

Best regards, Anton

I am unable to access my account in the forums. I know my password but not my user name, and I have forgotten my password. So because I don't remember my user name, I can't reset my password, which leads me here to submit my feature request.

I'm working on a project and each time I restart the FileZilla client I have to re-edit the same 5 files. When I upload, I don't check the 'I am done editing this file', so these files remain in the editing state. It would be nice if on login, I could be asked if I want to reopen previously open editing files, so I didn't need to navigate to each file and re-edit it.

Thank you, Howard Brown

I got website who stored in Filezilla, and since the morning the site is unavailable. I've checked the server (in heroku) and it works perfect. I got copy of the files on my localhost and i can reach the website from there (locally). This website has a lot of users and it is very important to fix this issue as soon as possible.. (I can't also connect to my account on filezilla - where i upload files) the site is - tiroche.co.il. Please help me!

People who use FZ Client for transfering jpeg's strongly feel the necessity of thumbnail display in the local site side at least if not in both panels(local and remote)

When a file was retrieved from an SFTP server, the timestamp was not translated from UTC into localtime.

As SFTP specs says, the time need to be send in UTC.

   	uint32   atime          present only if flag SSH_FILEXFER_ACMODTIME
   	uint32   mtime          present only if flag SSH_FILEXFER_ACMODTIME

The `atime' and `mtime' contain the access and modification times of
   the files, respectively.  They are represented as seconds from Jan 1,
   1970 in UTC.

FileZilla client and OpenSSH server respect the RFC and send this in UTC, but i think that after atime/mtime was transferred to the client, it should be translated (by FileZilla) in a localtime.

Hello, I am having consistent issues which I can replicate time after time.

I am using FTP with Require Explicit FTP over TLS to connect to my FTP servers.

I have enabled "Send FTP Keep alive commands" and connect succesfully and start the transfer.

after 60 minutes the log will consistently do the following

The keep alives will stop and the error below is listed. Error: Connection closed by server

Then exactly 60 minutes in to the transfer the following are logged

Error: GnuTLS error -53: Error in the push function. Error: Connection closed by server Error: File transfer failed after transferring 333,856,752 bytes in 3600 seconds

I cannot find any specifics on the GnuTLS error -53: Error in the push function on the web so was wondering if you can shed any light?

Regards, NJ

it is impossible for filezilla client to erase directories if this directiory is too big, if it contains many files. Timeout on connexion duration stops this operation before it is complete. Timeout on connexion duration is not reinitialized at each operation (LIST ou DELE). To erase such big directories, it is necessary to proceed in several (many) smaller erase operations. Best regards.

Running last version (3.65.0) of FileZilla Client when accessing the application gives a timeout error trying to retrieve directory listing. Using other apps all it's working correctly.

Connection log:

Status: Disconnected from server Status: Resolving address of ftp.xxxxxxxxx.com Status: Connecting to xxx.xxx.xxx.xxx:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: TLS connection established. Status: Logged in Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (xxx,xxx,xxx,xxx,209,84) Command: MLSD Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listing Status: Disconnected from server Status: Resolving address of ftp.infordio.com Status: Connecting to xxx.xxx.xxx.xxx:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: TLS connection established. Status: Logged in Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (xxx,xxx,xxx,xxx,207,63) Command: MLSD Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listing

The default timeout value of 20 means that certain directory listings, which take servers longer than 20 seconds, will be "silently" skipped.

They will appear red in the rolling log at the top, but will be lost when you are downloading thousands of files.

When you increase the timeout value the directories are correctly downloaded. This is a usb cable connection, so latency or bandwidth really aren't issues.

This has lead to data loss for me, as I use ftp and filezilla to make backups on my phone.

I have tried this with multiple servers and yes it is reproducible.

The problem are the Whatsapp image directories that just have too many entries and the servers on Android taking longer than 20 seconds to reply.

What I would expect is that at the very least an error is prominently displayed in red. It could be in failed transfers, though that is a bit of a misnomer.

BUT, that filezilla silently, without a popup or anything fails, while reporting to the user that all files have been successfully transfered, I consider wrong.

Perhaps you are aware of this. Please consider throwing a popup or toast or something that states, no the transfer didn't go through fine.

(The attached screenshot is of me trying this with the shortest timeout value, as you can see at the bottom all transfers supposedly went through fine)

Enhance the "preserve timestamps of transfered files" feature, by adding an option to preserve in only 1 direction or the other.

For example, I'd like be able to download files preserving timestamps, but upload files with the current time.

This will be useful for uploading JSP files to a Tomcat server.

Under the "Transfer" menu... rename menu item:

"preserve timestamps of transfered files"

to:

"preserve timestamps of all transfered files"

add menu items:

"preserve timestamps of uploaded files only" "preserve timestamps of download files only"

FileZilla icon in Dock is more bigger, than other icons.

Please, do smaller icon)

Screeshot: ​https://yadi.sk/i/1rFN4zza3MxPJh

Version: 3.6.0.2 OS: Windows 7 x64

I have a LOT of certificate-authenticated SFTP sites; since I went over 10, I began getting this error:

Status: Connecting to devstbe1... Response: fzSftp started Command: keyfile "
tsclient\C\Users\hwilkins\Documents\Work Documents\projects\0 I02218 ST Upgrade\SFT\certificates\test1_password1234.ppk" Command: keyfile "
tsclient\C\Users\hwilkins\Documents\Work Documents\projects\0 I02218 ST Upgrade\SFT\certificates\devccm\ccm.ppk" Command: keyfile "
tsclient\C\Users\hwilkins\Documents\Work Documents\projects\0 I02218 ST Upgrade\SFT\certificates\ccm\ccm.ppk" Command: keyfile "
tsclient\C\Users\hwilkins\Documents\Work Documents\projects\0 I02218 ST Upgrade\SFT\certificates\hoh\wellsfargo.ppk" Command: keyfile "
tsclient\C\Users\hwilkins\Documents\Work Documents\projects\0 I02218 ST Upgrade\SFT\certificates\ccm\sterling.ppk" Command: keyfile "
tsclient\C\Users\hwilkins\Documents\Work Documents\projects\0 I02218 ST Upgrade\SFT\certificates\mytestuser\mytestuser1.ppk" Command: keyfile "
tsclient\C\Users\hwilkins\Documents\Work Documents\projects\0 I02218 ST Upgrade\SFT\certificates\mytestuser\mytestuser2.ppk" Command: keyfile "
tsclient\C\Users\hwilkins\Documents\Work Documents\projects\0 I02218 ST Upgrade\SFT\certificates\cie\cie.ppk" Command: keyfile "
tsclient\C\Users\hwilkins\Documents\Work Documents\projects\0 I02218 ST Upgrade\SFT\certificates\fisglobal\dataexpress.ppk" Command: keyfile "
tsclient\C\Users\hwilkins\Documents\Work Documents\projects\0 I02218 ST Upgrade\SFT\certificates\testcertlogin\testcertlogin1.ppk" Command: keyfile "
tsclient\C\Users\hwilkins\Documents\Work Documents\projects\0 I02218 ST Upgrade\SFT\certificates\testcertlogin\testcertlogin2.ppk" Command: open "testcertlogin2@devstbe1" 22 Error: Server sent disconnect message Error: type 14 (no more auth methods available): Error: "Too many publickey verification attempts were made." Error: Could not connect to server

Shouldn't FileZilla only try the key file reflecting the login name instead of trying them all?

I think it would be helpful if the user could connect to their default site by doing one of three things, instead of having to go to the file menu and choosing "connect to default Site".

1. The behaviour of the button to open Site Manager

should be changed so that if you click on it, it will open the default site. To access Site Manager it should be moved to the first option after the user has clicked on the small down arrow.

2. If no site details are entered into the QuickConnect

toolbar then Filezilla should connect to the default site.

3. Simply add a new button on the main toolbar to

connect to default site.

Yes, I am lazy and I don't like having to click on the fiddly little down arrow to get to my default site. I would like a nice big fat button for my big fat fingers to aim for and click on!

Darren aka Darkbee darkbee@…

If right click on the toolbar then you should get a menu where you can hide the Quickconnect bar.

I know you can do this from "View".

But in other toolbars in Windows you can get a menu to show/hide toolbars.

After upgrading to v.3.23.02 on Mac OSX, I was pleased to find new toolbar icons/button. However, the meanings of the buttons are vague. Even more, the status, active or inactive, of a button is very hard to determine visually.

As to the vague meanings of the buttons/icons, I leave that to the designers, but I think some more thought should be put into the images to better represent their function. For example, the synchronized browsing icon and the refresh icon are similar but cannot visually tell you what their purpose is at a glance. I realize this is a challenge...

On the "status" of a button, turning some features on or off in the toolbar makes so minor a change to the icon, it is very hard to tell if it is active or inactive. I would suggest either a much more bold coloration on the "active" buttons and when a button goes inactive, make it very faint and grayscale only (not just faded version with colors). I am sure there are other good approaches to making these toolbar selections VERY obvious when active or inactive. Maybe consult the Apple Human Interface guidelines for some ideas. They seem to be pretty good at UI design.

Tooltips in file transfer queue panel shows outdated information.

Steps to reproduce:

1) Queue 4-5 files.

2) Let at least the first file transfer complete.

3) Mouse over the first (currently downloading) item to display the tooltip. It will display a previous, finished item.

On the right-down corner, I read "Queue: xxx GB". When I change the tabs of the transfer box, from 'queue', to 'not transferred', to 'successfully transferred', the label should change.. The size should be updated referring to the specific opened tab. I.e.: i change to "successfully transferred" and the label should be replaced with "Transferred: yyy GB".

could it say somewhere, how fast it is downloading/uploading?

I deal with many FTP sites, some which has faster connections than others. With dealing with a ADSL connection with low out bound speed, it would be nice to be able to configure the upload and download speed with the site configuration rather than the client settings.

As it is now, when transferring directory structures, FZ has a strange way of doing it. Instead of transferring all files and directories in each top-level directory, it seems to transfer some files and dirs in each TLD, then goes to a "level two" in each TLD, and then a "level three" in each TLD. At least, that's how it seems.

A better way would be to transfer all files and dirs in each TLD before going to the next TLD. For example, consider this remote tree:

/

dirA

level1

level2

dirB

level1

level2

dirC

If that remote tree was transferred to the local tree with FZ, FZ *should* transfer /dirA, /dirA/level1, and /dirA/level1/level2 *before* transferring anything in /dirB. It should then transfer everything in /dirB before moving on to /dirC.

The reason is simple: if a transfer is aborted, and the queue is lost (with FZ currently unable to export large queues, this is a very real problem), you can easily find what directories have been completely transferred, and which ones have been partially transferred, and proceed to transfer the rest. As it is now, if you lose your queue, the only way to be sure you get all of the files is to START ALL OVER AGAIN. When transferring 30,000+ files totalling several GIGABYTES in size this is VERY frustrating.

I hope that was understandable enough. If you need more clarification, let me know.

Please add Transfer Type (Ascii/Binary/Auto) to the context menu that is presented when I right click on a file. Selecting this should override but not change the default setting for transfer type.Thanks Brent Milton

Filezilla 3.0 gives no apparent notification of a skipped transfer when the setting to automatically over write older files is in effect and the target file is newer. A flag or other indication of non-transfer is appropriate here instead of recording the action as a successful transfer.

If possible, just showing the word "skipped" in the queue would make the picture much clearer. Such a tweak would make this excellent utility even better.

Each time a skipped transfer occurs the successful transfer count goes up even though no transfer occurred.

Dependent on [1052205] simultaneous folder-change (directory "follow me").

Upload files and directories listed in a user-specified text file.

With the pairing logic outlined in [1052205], where there's an association between a local directory tree and a server directory tree, each line need only specify the file in one location (for example, using the local path). Optionally, each line could be prefixed with "send" or "receive" tokens.

Open MS Office documents cannot be transfered if still open by Office. A transfer seams totake place but the filesize and date is represented by ??? and an Overwrite dialogbox apears trying to overwrite the file that does not yet exist. after closing the document the transfer goes well.

I suggest a test to see if the file is locked and if so, alert via a dialogbox that the document must be closed, and after pressing OK the test runs anew and if it is still open alert that transfer could not be done due to locked file.

Transfer queue section looks bad/hard to read in desktop dark mode.

Improvement would be nice.

In FileZilla, it is possible to select in the preferences how file sizes are shown. If I select for example the IEC style (KiB = Kibibyte = 1024 Byte) instead the default "Byte" option (=no KB,MB,GB,etc. just Bytes), FileZilla applies this perfectly to everywhere where file size appear, EXCEPT when one file gets transferred. Then, in the transfer queue, the transfer speed of all is still shown in the "KB/s" (for example) format instead of the "KiB/s" format which I selected in the options. All other file size numbers are formatted as selected in the settings. It seems the shown transfer speed completely ignores my settings; it also shows "KB/s" if I selected to show only Bytes.

Please add Transfer Type (Ascii/Binary/Auto) to the settings for each site within the Site Manager. Some hosted accounts always take ASCII files, while others take binary (e.g., Zend Optimizer). It is really annoying to keep forgetting to switch from one transfer type to another, depending upon the particular site that one is uploading files to. That should be stored within the settings for that particular site, and would be a really handy feature. Thanks!

When I first open Filezilla and subsequently go to full screen (Mac mojave 10.14.6), I instead get a black screen. The screen will stay black unless I use "Mission Control" to exit full screen. Instead of returning back to the original free floating Filezilla window, the new window is about 1.5 inches wide. The only way to get the window to return back to a normal size is to return back to "Mission Control". From that point on, it works perfectly fine, and it seems to only happen the first time I try to go full screen.

I captured a video of the whole process. ​https://uab.box.com/v/filezilla-bug

In the remote tree view..

it would be useful that when a leaf (a folder) is clicked or expanded ('+' icon)..

the subfolders underneath show the '+' icon if they contain at least one subfolder.

That way you can navigate in the folder structure quickly with less clicks. Right now, I have to press the folder with a '?' sign, wait a bit, then I can expand it.

That behavior could be optional and configurable in the settings.

I have a website that uses a certificate from Let's Encrypt. FileZilla reports a chain of four certificates:

0 (Server certificate) 1 (Intermediate certificate) 2 (Intermediate certificate) 3 (Root certificate)

Certificate 0 is from Let's Encrypt Certificate 1 is from ISRG Root X1 Certificate 2 is from DST Root CA X3 Certificate 3 says the issuer is self-signed (DST Root CA X3) and that it expired 9/30/2021. Certificate 1 should be trusted. The DST Root CA X3 was a temporary work-around that Let's Encrypt used to get their certificates working. The expiration of their DST Root CA X1 certificate was always planned and the ISRG Root X1 certificate should be trusted.

The situation is fully explained at ​https://letsencrypt.org/docs/dst-root-ca-x3-expiration-september-2021/

I don't have any idea of how FileZilla does its certificate checks, but by complaining about the expired certificate (and not allowing a user override), some sites are inaccessible through FileZilla.

If FileZilla uses OpenSSL, the notes from Let's Encrypt say it must use version 1.1.0 or later.

Location: https://filezilla-project.org/ Typo in text: European Union-spondored "bug bounty" program found some security issues which have promptly been fixed.

When resizing the window to a smaller size, the quick connect button gets hidden behind the other controls. I would suggest setting a minimum width on the form so it doesn't get small enough to cause the controls to shift.

Hello,

Using 3.27.1 (but appears on 3.25 too) after browsing into a directory with 79 files but rather long filenames the directory listing remains empty, yet the little status bar immediately below shows that there are files in the directory. (The listing works, confirmed by debug raw listing, and using lftp too.)

After interacting with the listbox (resizing the listbox, or the whole window - so causing the resize of the listbox in any way), results in the file list appearing correctly. (I can scroll, download files, etc.)

Another interesting quirk is that if I browse to a different directory and then click back to this one, things shop up correctly. If I click on to its parent and back, it's empty again.

Playing with it more, it seems that the parent directory is the culprit (happens to be called uploaded, I hope the name has nothing to do with the phenomenon), because after clicking on that (contents show), and clicking on an other directory, then the dir I just clicked appears empty.

And it seems not completely deterministic :(

HI,

is it possible to do a quick fix for UNC path support on the remote site.

"
pcname\share" should result in "CWD
pcname\share" instead of "cwd drive:/pcname/share".

thanks in advance

maik

FileZilla Client 3.6.0.2 is unable to normally download a file from ftp, if resulting path name exceeds MAX_PATH limit. Which is already reported, see related bugs: ​6193,​4791 ,​4792,​6193.

Though, I've just tried to manually input an UNC path to "Local site" field. Like "
?\G:\temp\timeweb-ftp4(filezilla)\" instead of just "G:\temp\timeweb-ftp4(filezilla)\".

And now I was able to download needed files. Although files were downloaded OK, there were multiple error messages: "Directory ':\temp' couldn't be created (error 3: the system cannot find the path specified). If I close this message - new one won't pop up immediately, though, after some time - it would, for sure.

​Here's 45sec screenvideo I've captured.

Also, please find filezilla.log attached (sorry,in fact, it is not the one related to the video, it was a separate run.) At the end of the log, I've canceled transferring, though, once again - this error message does not affects transferring, it just continues.

After a recent update, it has become impossible to interact with a server where there are files that have utf-8 filenames containing characters such as "ñ".

Steps to reproduce:

• connect to a server where there are such files

Expected: such files should be listed correctly Observed: the filenames are shown with random garbage characters

• Select files on the server having filenames containing an "ñ"
• try to delete the selected files

Expected: should work Observed: fails with a nonsensical error message more or less like "no such file or directory". Probably because FileZilla is asking the server to delete the file with the wrong filename (and hence the error message from the server is legitimate).

This used to work fine.

I think an FTP URL Fetcher would be in it's place, "feeling" if you copy a FTP URL into the copyboard, it will bring up a questionbox saying "Connect to url blabla? yes/no"

Just ran into this issue. If one side supports UTF-8 characters in either the filename or directory name, and the other side does not, the transfer fails (and can never succeed.)

The main issue here is that the error message is a terribly generic "Could not start transfer".

The easiest fix for this is simply showing a better error message (Took me a while to figure it out.)

A better solution would be to use some system function to determine and invalid path characters and add them to the list of invalid characters for filtering.

In this case, as I was downloading a site backup (new client,) they had images (from god knows where) that included the width and height as 57×57 instead of 57x57 (first contains a, new to me, UTF-8 x whereas the second contains a normal x.)

Let me know if you need additional logs or anything else.

Log:

00:13:25	Trace:	CControlSocket::SendNextCommand()
00:13:25	Trace:	CSftpFileTransferOpData::Send() in state 0
00:13:25	Status:	Starting download of /applications/wfcrhveasu/public_html/wp-content/themes/ALTN/icons/apple-touch-icon-57×57-precomposed.png.png
00:13:25	Trace:	CSftpChangeDirOpData::Send() in state 0
00:13:25	Trace:	CControlSocket::ResetOperation(0)
00:13:25	Trace:	CControlSocket::ParseSubcommandResult(0)
00:13:25	Trace:	CSftpFileTransferOpData::SubcommandResult() in state 1
00:13:25	Trace:	CControlSocket::SendNextCommand()
00:13:25	Trace:	CSftpFileTransferOpData::Send() in state 4
00:13:25	Command:	get "apple-touch-icon-57×57-precomposed.png.png" "D:\Projects\Adfinitely\AnyLabTestNow\old-server\applications\wfcrhveasu\public_html\wp-content\themes\ALTN\icons\apple-touch-icon-57×57-precomposed.png.png"
00:13:25	Error:	/applications/wfcrhveasu/public_html/wp-content/themes/ALTN/icons/apple-touch-icon-57×57-precomposed.png.png: open for read: no such file or directory
00:13:25	Trace:	CSftpFileTransferOpData::ParseResponse() in state 4
00:13:25	Trace:	CControlSocket::ResetOperation(2)
00:13:25	Error:	File transfer failed

Hello!

Unable to install - See error: ​https://www.screencast.com/t/HPG1AB6T

Is this an error with my system or your program?

Thank You, Daniel Rodgers

Hi,

it seems that v3.52.0.5 is unable to move (rename) a file when a file with same name exists in the destination directory. This is the error:

Error: mv /source/directory/TESTFILE /destination/directory/TESTFILE: received failure with description 'Failure'

TESTFILE is an empty text file; /destination/directory already contained a file named TESTFILE.

Trying the same operation with sftp CLI (rename /source/directory/TESTFILE /destination/directory/TESTFILE) the operation succeeds.

Optimal would be asking whether overwrite or not, which neither the sftp command does; 'Failure' looks like a bug to me.

Thanks!

I am having trouble connecting to the FileZilla. Every time I am trying to connect, it says "Could not Connect to Server". I have restarted the computer and I think I have the latest version too.

I have tried specifying the ASCII editor (EditPlus), putting in the verified location, and selecting Use system's default editor for text files. In both cases, when I select a text file from either the local or remote file list, I get an error (attached). The actual location of the editor is "c:\program files\editplus 3\editplus.exe", but FileZilla is adding a whole bunch of extra characters (see attached). Help!!!

FileZilla Pro is unable to connect to AWS S3 buckets that have conditional ListBucket permissions. The result is a 400 Bad Request.

I have a S3 bucket on which the ListBucket permission for my user is conditional with a string prefix, e.g.: {

"Effect": "Allow",

"Action": [

"s3:ListBucket"

],

"Resource": "arn:aws:s3:::my-bucket",

"Condition": {

"StringLike": {

"s3:prefix": [

"",

"/",

"mysubdir",

"mysubdir/"

etc.

The policy means that the user is only able to browse the top level of the bucket and the mysubdir folder, but not any of the other folders in there. The policy is confirmed as working, via the AWS CLI, AWS console and other 3rd party apps like "S3 Browser", "Cyberduck", etc.

When FileZilla Pro tries to connect to a bucket like this the result is: Response: HTTP/1.1 400 Bad Request and Error: Failed to retrieve directory listing

I tried adding a remote directory in the connection config (eg /my-bucket/mysubdir) but that didnt help.

Please help!

We have two servers that we use with Filezilla one hosted by ourselves and one by a third party.

As of yesterday we are no longer able to connect to either - we have tried on a few different accounts with IPs that are cleared for access but none appear to be working.

We have checked with our development team and the details we are entering and correct and were working prior to yesterday.

When attempting to connect we get error "Unable to connect to server". One of the servers is part of a covid tracker so it is vital we can update it ASAP. We have updated to the latest version of Client but still no luck.

Even after updating to 3.25.1 unable to connect to old servers

When connecting to a site it will initially connect but then when clicking on the first folder available it appears to be completely empty. There is no error code, the status says "directory listing of "/I-Drive" successful. Have tried to reconnect several times but no luck, the site was working normally until a few hours ago.

I am trying to upload our benefits file, however I keep getting the attached message. Can you please help with this?

Hi,

I know about this bug very long time and I have still hoped that this bug will be fixed in new a release but I have mistaken. :)

So where is the problem ? I will write how reproduce the bug.

Create direcory e.g. test/ and in this direcory create directory .svn/ (or file .svn), turn on "Directory listing filters" and create filter which will filter .svn direcory(or file) and try upload this direcory. Filezilla doesn't upload this directory.

It works with any number of filtered items. But if directory contain some or only one unfiltered dir or file, then the directory will be uploaded.

It affects downloading as well and when You try delete that directory with filtered dir or files on FTP!, Filezilla doesn't delete that folder.

I upgraded to 3.42.1 and can no longer get directory listings on TLS connection. This was not happening with previous version of Filezilla.

The error I receive is: Certificate of connection does not match expected certificate.

I cleared the certificate by removing trustedcerts.xml and retrieved a new certificate, but that did not fix the problem. I also cleared cache (from debug tab) and that also did not fix the problem. Evertyhing was working fine until I installed new release (no changes to connections). And it still works with older version of FileZilla.

Log (verbose) snippet follows:

10:22:12	Command:	LIST
10:22:12	Trace:	CTlsSocketImpl::ContinueHandshake()
10:22:12	Trace:	CFtpControlSocket::OnReceive()
10:22:12	Response:	125 List started OK
10:22:12	Trace:	CFtpRawTransferOpData::ParseResponse() in state 4
10:22:12	Trace:	CControlSocket::SendNextCommand()
10:22:12	Trace:	CFtpRawTransferOpData::Send() in state 5
10:22:14	Trace:	CTlsSocketImpl::ContinueHandshake()
10:22:14	Trace:	CTlsSocketImpl::ContinueHandshake()
10:22:14	Trace:	CTlsSocketImpl::ContinueHandshake()
10:22:14	Trace:	TLS Handshake successful
10:22:14	Trace:	Protocol: TLS1.0, Key exchange: RSA, Cipher: AES-256-CBC, MAC: SHA1
10:22:14	Error:	Certificate of connection does not match expected certificate.
10:22:14	Error:	The data connection could not be established: ECONNABORTED - Connection aborted
10:22:14	Trace:	CTransferSocket::TransferEnd(3)
10:22:14	Trace:	CFtpControlSocket::TransferEnd()
10:22:14	Trace:	CFtpControlSocket::OnReceive()
10:22:14	Response:	250 List completed successfully.
10:22:14	Trace:	CFtpRawTransferOpData::ParseResponse() in state 7
10:22:14	Trace:	CFtpControlSocket::ResetOperation(2)
10:22:14	Trace:	CControlSocket::ResetOperation(2)
10:22:14	Trace:	CFtpRawTransferOpData::Reset(2) in state 7
10:22:14	Trace:	CFtpListOpData::SubcommandResult(2) in state 3
10:22:14	Trace:	CFtpControlSocket::ResetOperation(2)
10:22:14	Trace:	CControlSocket::ResetOperation(2)
10:22:14	Trace:	CFtpListOpData::Reset(2) in state 3
10:22:14	Error:	Failed to retrieve directory listing

Hi,

I've been having problems with Filezilla. Every time I try and to connect it's coming up with errors. But now, I can't even connect at all - it doesn't load.

Is anyone able to help with this please?

Thank you.

Unable to login to inventive-engineering FTP, I can login to other clients FTPs with no issues but I get the following when trying to login to inventive-engineering and it seems to time out:

Status: Resolving address of ftp.inventive-engineering.com Status: Connecting to 194.78.36.98:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Logged in Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (194,78,36,98,35,17). Command: MLSD Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listing Status: Disconnected from server Status: Resolving address of ftp.inventive-engineering.com Status: Connecting to 194.78.36.98:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Logged in Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (194,78,36,98,34,215). Command: MLSD Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listing

The last time I opened Filezilla on my MacBook (macOS BigSur 11.5.2), I did it with a screen configuration that I no longer have; now, the result is that the position (top, left) is out of screen, and doesn't let me see the entire window, also hides the commands that would allow me to reset it. Blocker bug!!

While you fix this bug, how do I to reset screen? (restart was not enough)

I can't resize the window. I have tried everything. I can click on the view button on the top of the screen and enter full screen, but I can't resize the window on the desktop. I just downloaded this program yesterday, so it is the latest version.

Here is a screen shot of the bug:

​https://www.dropbox.com/s/228q865pllllvyd/Screenshot%202016-05-13%2021.29.33.png?dl=0

Virtually all Mac programs have a Window menu option at the top of the screen that lets you choose 'Zoom', but FileZilla only has 'View', and 'View doesn't have the 'Zoom' feature that would fix this problem.

If the Window menu was added, this would fix the problem because we could manually zoom the window if the zoom button is hidden, like it is on my machine.

Thank you.

I downloaded filzilla today. I followed some tutorials and read a few forums about using filezilla. I am unable to see any files on my pc or my server to upload. I also enabled in the debug window "Show raw directory listing", still nothing viewable ! And I am unable to delete any files on my server ! Please look at my screen shots here

Please contact me at n e b l e n d e r @ g m a i l . c o m

Great tool - use it most days

Sometimes I set up a big list of downloads. I then stop the process and wish to sort the list by file size so I can remove all the big files or all the small files. But although I can click the size column and I get a UI reaction to indicate a click happened the table does not sort.

I had downloaded from the filezilla website a packed Filezilla and copied the content of extracted archive into propper folders in /usr. I had also given the permissions (chmod 755) for all copied files from bin folder.

1. The menu entry hasn't apeared
2. when I tryed to launch filezilla from bash, I had recieved following error:

"bash: /usr/bin/filezilla: No such file or directory"

even if the given file exist an had excetution permission

On May 30 I updated Filezilla to version 3.48.1 using the same settings as always. Whenever I attempt to connect to a server, Filezilla reports "Remote certificate not trusted". The notification screen shows the "Trust" options at the bottom but they are grayed out and I'm not able to select an option. Clicking on "Okay" allows access to the server, but the warning keeps popping up. I have reinstalled Filezilla and the issue still remains. Attached is a screenshot of the warning popup.

I have never had issues being able to view/edit a file. I have always used UltraEdit (current version 27.00.0.72). The transfer says successful when selecting view/edit. The files have always been placed in a temp folder but now all that is in the temp folder is a lock file fz3temp-lockfile of zero bytes. I updated setting to use the system default editor for text files and that did not work. Here is the setting for UltraEdit "C:\Program Files\IDM Computer Solutions\UltraEdit\uedit64.exe". This has worked for years. I am able to FTP the files from the server to my PC. I am attach the debug log with Windows and FileZilla version. I use this option religiously and would really like some help. I did read the forum pages and looked though the tickets but nothing seems to match my issue.