Custom Query (2165 matches)

Hi,

I'm having trouble with filezilla, when I disconnect my second monitor, before I close filezilla.

After I disconnect the second monitor, I can't no longer access the bounder of the program so I can not resize the window. That let's me in an incapacity of acceding my configured connection. I can't no longer use filezilla.

Thank you.

I downloaded filzilla today. I followed some tutorials and read a few forums about using filezilla. I am unable to see any files on my pc or my server to upload. I also enabled in the debug window "Show raw directory listing", still nothing viewable ! And I am unable to delete any files on my server ! Please look at my screen shots here

Please contact me at n e b l e n d e r @ g m a i l . c o m

Sempre que tento por alguma coisa na pasta dos ficheiros da erro pois diz que o ficheiro ja existe e que temos de substituir.

I'd like to see the 'transfer type' (ASCII|Binary) added to each of the entries in the status/history pane at the bottom.

I just downloaded FileZilla. I get to the log in screen. The cursor blinks in the cell where I should enter my ftp information, but it does not allow me to enter anything.

I am using a Mac.

Tried transferring two different files, both of which failed multiple times after transferring EXACTLY 393,216 bytes! _ Error: Connection timed out Error: File transfer failed after transferring 393,216 bytes in 24 seconds _ Here is a full listing of my session:

Status: Resolving address of ftp.kinetic.more.net Status: Connecting to 198.209.253.55:21... Status: Connection established, waiting for welcome message... Response: 220 ProFTPD 1.3.3 Server (kinetic Service) [198.209.253.55] Command: USER bethmen@… Response: 331 Password required for bethmen@… Command: PASS Response: 230 User bethmen@… logged in Command: SYST Response: 215 UNIX Type: L8 Command: FEAT Response: 550 FEAT: Operation not permitted Status: Connected Status: Retrieving directory listing... Command: CWD /export/kinetic/home/c/coin.org/bbb/eee/bethmen/WebPublish/bethelmennchurch.org/www Response: 250 CWD command successful Command: PWD Response: 257 "/export/kinetic/home/c/coin.org/bbb/eee/bethmen/WebPublish/bethelmennchurch.org/www" is the current directory Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (198,209,253,55,202,22). Command: LIST Response: 150 Opening BINARY mode data connection for file list Response: 226 Transfer complete Status: Directory listing successful Status: Resolving address of ftp.kinetic.more.net Status: Connecting to 198.209.253.55:21... Status: Connection established, waiting for welcome message... Response: 220 ProFTPD 1.3.3 Server (kinetic Service) [198.209.253.55] Command: USER bethmen@… Response: 331 Password required for bethmen@… Command: PASS Response: 230 User bethmen@… logged in Status: Connected Status: Starting upload of Y:\Bethel Mennonite Church\Sermon Archive\2010\2010-07-18Message.mp3 Command: CWD /export/kinetic/home/c/coin.org/bbb/eee/bethmen/WebPublish/bethelmennchurch.org/www/Images Response: 250 CWD command successful Command: PWD Response: 257 "/export/kinetic/home/c/coin.org/bbb/eee/bethmen/WebPublish/bethelmennchurch.org/www/Images" is the current directory Status: Retrieving directory listing... Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (198,209,253,55,223,81). Command: LIST Response: 150 Opening BINARY mode data connection for file list Response: 226 Transfer complete Command: PASV Response: 227 Entering Passive Mode (198,209,253,55,204,179). Command: STOR 2010-07-18Message.mp3 Response: 150 Opening BINARY mode data connection for 2010-07-18Message.mp3 Error: Connection timed out Error: File transfer failed after transferring 393,216 bytes in 23 seconds Status: Resolving address of ftp.kinetic.more.net Status: Connecting to 198.209.253.55:21... Status: Connection established, waiting for welcome message... Response: 220 ProFTPD 1.3.3 Server (kinetic Service) [198.209.253.55] Command: USER bethmen@… Response: 331 Password required for bethmen@… Command: PASS Response: 230 User bethmen@… logged in Status: Connected Status: Starting upload of Y:\Bethel Mennonite Church\Sermon Archive\2010\2010-07-18Message.mp3 Command: CWD /export/kinetic/home/c/coin.org/bbb/eee/bethmen/WebPublish/bethelmennchurch.org/www/Images Response: 250 CWD command successful Status: Retrieving directory listing... Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (198,209,253,55,209,206). Command: LIST Response: 150 Opening BINARY mode data connection for file list Response: 226 Transfer complete Command: PASV Response: 227 Entering Passive Mode (198,209,253,55,224,211). Command: APPE 2010-07-18Message.mp3 Response: 451 2010-07-18Message.mp3: Append/Restart not permitted, try again Error: File transfer failed Status: Starting upload of Y:\Bethel Mennonite Church\Sermon Archive\2010\2010-07-18Message.mp3 Status: Retrieving directory listing... Command: PASV Response: 227 Entering Passive Mode (198,209,253,55,233,6). Command: LIST Response: 150 Opening BINARY mode data connection for file list Response: 226 Transfer complete Status: Skipping upload of Y:\Bethel Mennonite Church\Sermon Archive\2010\2010-07-18Message.mp3 Status: File transfer successful, transferred 3,836 bytes in 3 seconds Status: Retrieving directory listing... Command: CWD Images Response: 250 CWD command successful Command: PWD Response: 257 "/export/kinetic/home/c/coin.org/bbb/eee/bethmen/WebPublish/bethelmennchurch.org/www/Images" is the current directory Status: Directory listing successful Command: DELE 2010-07-18Message.mp3 Response: 250 DELE command successful Status: Disconnected from server Status: Resolving address of ftp.kinetic.more.net Status: Connecting to 198.209.253.55:21... Status: Connection established, waiting for welcome message... Response: 220 ProFTPD 1.3.3 Server (kinetic Service) [198.209.253.55] Command: USER bethmen@… Response: 331 Password required for bethmen@… Command: PASS Response: 230 User bethmen@… logged in Status: Connected Status: Starting upload of Y:\Bethel Mennonite Church\Sermon Archive\2010\2010-07-18Message.mp3 Command: CWD /export/kinetic/home/c/coin.org/bbb/eee/bethmen/WebPublish/bethelmennchurch.org/www/Images Response: 250 CWD command successful Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (198,209,253,55,249,220). Command: STOR 2010-07-18Message.mp3 Response: 150 Opening BINARY mode data connection for 2010-07-18Message.mp3 Error: Connection timed out Error: File transfer failed after transferring 393,216 bytes in 24 seconds Status: Resolving address of ftp.kinetic.more.net Status: Connecting to 198.209.253.55:21... Status: Connection established, waiting for welcome message... Response: 220 ProFTPD 1.3.3 Server (kinetic Service) [198.209.253.55] Command: USER bethmen@… Response: 331 Password required for bethmen@… Command: PASS Response: 230 User bethmen@… logged in Status: Connected Status: Starting upload of Y:\Bethel Mennonite Church\Sermon Archive\2010\2010-07-18Message.mp3 Command: CWD /export/kinetic/home/c/coin.org/bbb/eee/bethmen/WebPublish/bethelmennchurch.org/www/Images Response: 250 CWD command successful Status: Retrieving directory listing... Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (198,209,253,55,252,112). Command: LIST Response: 150 Opening BINARY mode data connection for file list Response: 226 Transfer complete Command: PASV Response: 227 Entering Passive Mode (198,209,253,55,251,210). Command: APPE 2010-07-18Message.mp3 Response: 451 2010-07-18Message.mp3: Append/Restart not permitted, try again Error: File transfer failed Status: Starting upload of Y:\Bethel Mennonite Church\Sermon Archive\2010\2010-07-18Message.mp3 Status: Retrieving directory listing... Command: PASV Response: 227 Entering Passive Mode (198,209,253,55,222,163). Command: LIST Response: 150 Opening BINARY mode data connection for file list Response: 226 Transfer complete Status: Skipping upload of Y:\Bethel Mennonite Church\Sermon Archive\2010\2010-07-18Message.mp3 Status: File transfer successful, transferred 3,836 bytes in 2 seconds Status: Starting upload of Y:\Bethel Mennonite Church\Bulletins\2010\PDF\2010-07-18_BMC_Bulletin.pdf Command: PASV Response: 227 Entering Passive Mode (198,209,253,55,213,230). Command: STOR 2010-07-18_BMC_Bulletin.pdf Response: 150 Opening BINARY mode data connection for 2010-07-18_BMC_Bulletin.pdf Error: Connection timed out Error: File transfer failed after transferring 393,216 bytes in 23 seconds Status: Resolving address of ftp.kinetic.more.net Status: Connecting to 198.209.253.55:21... Status: Connection established, waiting for welcome message... Response: 220 ProFTPD 1.3.3 Server (kinetic Service) [198.209.253.55] Command: USER bethmen@… Response: 331 Password required for bethmen@… Command: PASS Response: 230 User bethmen@… logged in Status: Connected Status: Starting upload of Y:\Bethel Mennonite Church\Bulletins\2010\PDF\2010-07-18_BMC_Bulletin.pdf Command: CWD /export/kinetic/home/c/coin.org/bbb/eee/bethmen/WebPublish/bethelmennchurch.org/www/Images Response: 250 CWD command successful Status: Retrieving directory listing... Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (198,209,253,55,239,160). Command: LIST Response: 150 Opening BINARY mode data connection for file list Response: 226 Transfer complete Command: PASV Response: 227 Entering Passive Mode (198,209,253,55,225,46). Command: APPE 2010-07-18_BMC_Bulletin.pdf Response: 451 2010-07-18_BMC_Bulletin.pdf: Append/Restart not permitted, try again Error: File transfer failed Status: Starting upload of Y:\Bethel Mennonite Church\Bulletins\2010\PDF\2010-07-18_BMC_Bulletin.pdf Status: Retrieving directory listing... Command: PASV Response: 227 Entering Passive Mode (198,209,253,55,253,86). Command: LIST Response: 150 Opening BINARY mode data connection for file list Response: 226 Transfer complete Status: Skipping upload of Y:\Bethel Mennonite Church\Bulletins\2010\PDF\2010-07-18_BMC_Bulletin.pdf Status: File transfer successful, transferred 3,928 bytes in 3 seconds Status: Disconnected from server

In FileZilla, it is possible to select in the preferences how file sizes are shown. If I select for example the IEC style (KiB = Kibibyte = 1024 Byte) instead the default "Byte" option (=no KB,MB,GB,etc. just Bytes), FileZilla applies this perfectly to everywhere where file size appear, EXCEPT when one file gets transferred. Then, in the transfer queue, the transfer speed of all is still shown in the "KB/s" (for example) format instead of the "KiB/s" format which I selected in the options. All other file size numbers are formatted as selected in the settings. It seems the shown transfer speed completely ignores my settings; it also shows "KB/s" if I selected to show only Bytes.

It keeps transfering the files every time I send FTP no matter if file has changed or not

Hello, I need help with our updated version, because we're having an issue with transferring file - giving us "Elapse error" stuck @9.98% Please give us a call to assist us @323-957-3340 or 800-545-0999 Hours 8-5pm pst

I send my recordings daily and this is causing a major issue and delaying my business. I can't find answer on forum.

-Pablo Carrillo

Hi,

I've been having problems with Filezilla. Every time I try and to connect it's coming up with errors. But now, I can't even connect at all - it doesn't load.

Is anyone able to help with this please?

Thank you.

Hello! My name is Pablo Massa, I am a graphic designer/web developer, I have 24 years, live in Montevideo-Uruguay and use FileZilla.

I send you a screenshot with a feature suggestion, it was fun to emulate the interface of Filezilla. ​http://www.crepesweb.com/no-robots/otros/feature-filezilla.png Feature Suggestion (online too)

Sincerely, Pablo.

Version: 3.10.3 i686 OS: Windows 7 Ultimate 32-bit, SP1, 6.1.7601

Please offer more Charset settings for UTF-8/16 under "Settings" dialogue and for the Quickconnect bar to allow users to set a default behavior for all connections under Site Manager and on Quickconnect.

I often get a very long link such as ​ftp://ipaddress/dir1/dir2/dir3/etc which points to a directory with international filenames and the Quickconnect bar is best way to connect. However, it fails to enable UTF8 so I see garbage filenames. So I must Site Manager, but I must always change the "General - Host" field and often enable "Charset - Force UTF8" for every different different ftp link or IP address.

I am aware of "Upcoming Changes" in the Forums. ​https://forum.filezilla-project.org/viewtopic.php?t=36597

Could you place a box in each local/remote panes to search in displayed files and folders? Like Firefox search box that searches in folder tree (that are displayed) and highlights matched files in tree

Steps to reproduce:

1. Right-click a file, and click "View / Edit".
2. Open the menu File -> Show files currently being edited...
3. Click on the file we had selected for editing before, and click "Upload and unedit".

Note that the file remains in the status "Uploading..." and is never removed from the list. If I close the dialog and attempt to re-open it, FileZilla tells me there are no files to edit.

It should instead remove the file from the list, and, if I shouldn't have the dialog open when there are no more files to edit, it should pop the same alert as when I tried to open the dialog when no files were being edited.

I set this to low priority because FileZilla does not crash, and it's hard, if not impossible, to actually crash it through this bug. I also set it to Windows, but it may apply to other operating systems as well.

When the destination file already exist, and we click on "Cancel" on the dialog window, the transfer is not done,

but the transfer is added in Successfull transfers list This is not correct.

FileZilla 3.1.5.1

If possible, kindly consider to let the Size column be sorted in order of value. Thanks.

I would like to have an option to NOT hide the passwords in sitemanager. I know this is a security risk and of course the default should be hidden, but in my case my accounts are not that super classified. By showing passwords in the sitemanager I will have a "personal database" (or address book if you like) of my ftp- accounts, and if I need to use another program or in any other way use an account outside of FileZilla, I can always look to FileZilla for the correct account-information. Otherwise I would have to look for the account-information in mails, hardcopies from ISPs, ICQ messages - u name it.

When I'm trawling through my local file window in FileZilla client 2.2.18.

I often find myself wishing to open a file's target directory or even the selected directory in Explorer.

But there appears to be no way to do so.

Therefore I've got to find this directory or file via Explorer and trawl through the directories *again* which can take an age!

This inability of FileZilla to do this, just makes me and no doubt hundreds of others irated. :-)

But why not save thousands of users grief and add a wee icon or an extra Menu line to do a 'open Container' command on a file or directory right into Explorer please?

Can't be hard to do surely?

I have the need to download a lot of litlle files with the original date/time information. Why your client has choosen to apply the 'actual' date/time instead of keep the original ones?

This patch lets users do various actions after queue completion. It is accessed by right-clicking on the "Queued files" frame and implements the following functionality from RFE# 1707774:

• Close FileZilla
• Run program/command
• Disconnect from server
• Shutdown system (win only)
• Reboot system (win only)

This initial version is not properly tested on various systems, and should not be applied before more bug testing. It's posted here to get feedback on patch quality, and if I'm on the right track with this.

More information will be posted on the already mentioned RFE.

This is just visual "icing", but it would be nice to have the actual TCP port (((217*256) + 7) = 55559) for passive connections logged immediately after the server response "Entering Passive Mode (...". Something like what is seen in the FlashFXP FTP client would be nice:

[R] 227 Entering Passive Mode (66,225,88,75,217,7). [R] Opening data connection IP: 66.225.88.75 PORT: 55559

We find it very dangerous the ability to move folders in the remote pane without asking for a confirmation. It would be nice to have a option that the user can check in order to ask for the confirmation.

Update:

There are two possibilities:

• ask the user for confirmation
• disable drag and drop

We have a need for GSS authentication, but without encryption after connecting. I believe Filezilla is essentially sending the "private" command to the FTP server.

Basically, we need the same functionality as if you started the unix command line 'ftp' without the '-x' option.

I'd be more than happy to work with your developers to make this happen.

Mike Dopheide dopheide@…

The up directory button for the remote server is within the directory tree structure. When you have a directory with a large amount of files that you sort in different ways you often have to keep scrolling up and down to find the "Up 1 Directory" button.

It would be nicer if it was a permanent button just to the left of the "Remote Site" Label so that you could change directories without having to scroll

I have just updated FZ client to new version, noticed that the date format has changed to mm/dd/yy. Before update this was dd/mm/yy as per system settings (UK, Windows 8, 64-bit). Checked the setting in Filezilla and the default is selected (use system default). It seems this is being ignored.

Hi,

Rename or Copy/Paste don't work in FileZilla Site Manager.

No way to save rename, the textbox stay opened. And copy, paste create favorite !

Filezilla version 3.9.0.6 on OS X 10.9.5.

Opening dialog "Directory listing filters" by keyboard shortcut Ctrl+I triggers an "assertion failure" eventually followed by a core dump if an object was selected in the "detailed listing" of either local or remote pane before.

Steps to reproduce (see screenshot_main-window.png; terms according to ​https://wiki.filezilla-project.org/FileZilla_Client_Tutorial_(en)#Navigating_and_window_layout): As long as objects are selected in the "directory tree" only like user directory "dummy" in the screenshot the said dialog behaves as expected. But as soon as an object in the "detailed listing" like folder "Musik" marked by a red asterisk in the screenshot gets selected by a single mouse click opening the dialog by keyboard shortcut Ctrl+I doesn't work any longer. First a dialog "filezilla" (screenshot_dialogue-filezilla.png) comes up stating "An assertion failed". When "Continue" gets clicked FileZilla apparently continues to operate as usual. But clicking button "Stop" or hitting key "Esc" triggers a core dump.

It doesn't matter whether or not a connection is active. Opening the dialog from the menu, either by mouse or by keyboard mnemonics, isn't affected at all.

Up to date Arch Linux x86_64. FileZilla either 3.14.1 from the distribution's official repositories or SVN checkout 7250 compiled against libfilezilla 0.3.0 or SVN checkout 7250, same findings with all these variants.

Aside from the screenshots the "backtrace" provided by dialogue "filezilla" (backtrace_dialogue-filezilla.txt) as well as a backtrace generated by handing the saved core dump to gdb via sytemd's coredumpctl (backtrace_gdb.txt) are attached.

When renaming a remote file, if you click outside the renaming box instead of press enter key, fileZilla blocks and have to reconnect again

In the newest FTP client version (3.45.0), when selecting the Refresh button, all folders in the local site view close, and the view jumps to the top of the directory tree. This never used to occur. This is highly irritating as I have to navigate back to the folder in which I was working and dig back into any subfolders I had open after every single refresh.

I am not able to log into a specific site using the latest version of FileZilla.

I have not yet been able to successfully log in to this particular site (216.55.183.227). However, I have been able to do so using other FTP clients such as FTP Voyager using the same configurations (site IP address, port #, password, remote directory, transfer mode, etc.).

The following is typical of what is logged by FZ:

Status: Connecting to 216.55.183.227:21... Status: Connection established, waiting for welcome message... Status: Logged in Status: Retrieving directory listing of "/FC35"... Command: CWD /FC35 Response: 250 CWD command successful Command: PWD Response: 257 "/FC35" is the current directory Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (216,55,183,227,190,31). Command: MLSD Error: The data connection could not be established: ETIMEDOUT - Connection attempt timed out Error: Connection timed out after 61 seconds of inactivity Error: Failed to retrieve directory listing Status: Disconnected from server Status: Connecting to 216.55.183.227:21... Status: Connection established, waiting for welcome message... Status: Logged in Status: Retrieving directory listing of "/FC35"... Command: CWD /FC35 Response: 250 CWD command successful Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (216,55,183,227,157,158). Command: MLSD Error: The data connection could not be established: ETIMEDOUT - Connection attempt timed out Error: Connection timed out after 61 seconds of inactivity Error: Failed to retrieve directory listing

Please allow the FileZilla's temporary directory (C:\Temp\fz3temp-1) to be configurable. We work with confidential files and I would like these temporary files to be stored on an encrypted local disk.

I know these files are normally deleted at the end of a session, but there is a possibility the files could be left unencrypted if the program or computer crashed unexpectedly.

Also, I am not sure if the Temp files are wiped securely from c:\temp when they are deleted normally.

Thanks!

This is what I get every time I try to login.

"Status: Resolving address of bbhs.com Status: Connecting to 74.220.215.78:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Error: Server sent unsorted certificate chain in violation of the TLS specifications Status: Verifying certificate... Status: TLS connection established. Command: USER bbhscom Response: 331 User bbhscom OK. Password required Command: PASS * Response: 230 OK. Current restricted directory is / Command: SYST Response: 215 UNIX Type: L8 Command: FEAT Response: 211-Extensions supported: Response: EPRT Response: IDLE Response: MDTM Response: SIZE Response: MFMT Response: REST STREAM Response: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; Response: MLSD Response: AUTH TLS Response: PBSZ Response: PROT Response: UTF8 Response: TVFS Response: ESTA Response: PASV Response: EPSV Response: SPSV Response: ESTP Response: 211 End. Command: OPTS UTF8 ON Response: 200 OK, UTF-8 enabled Command: PBSZ 0 Response: 200 PBSZ=0 Command: PROT P Response: 200 Data protection level set to "private" Status: Logged in Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (74,220,215,78,175,249) Command: MLSD Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listing Status: Disconnected from server Status: Resolving address of bbhs.com Status: Connecting to 74.220.215.78:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Error: Server sent unsorted certificate chain in violation of the TLS specifications Status: Verifying certificate... Status: TLS connection established. Command: USER bbhscom Response: 331 User bbhscom OK. Password required Command: PASS * Response: 230 OK. Current restricted directory is / Command: OPTS UTF8 ON Response: 200 OK, UTF-8 enabled Command: PBSZ 0 Response: 200 PBSZ=0 Command: PROT P Response: 200 Data protection level set to "private" Status: Logged in Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (74,220,215,78,179,175) Command: MLSD Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listing"

FileZilla Client

Version: 3.35.1

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2018-07-23 Compiled with: x86_64-w64-mingw32-gcc (GCC) 6.3.0 20170516 Compiler flags: -g -O2 -Wall

Linked against:

wxWidgets: 3.0.5 SQLite: 3.22.0 GnuTLS: 3.5.18

Operating system:

Name: Windows 10 (build 17134), 64-bit edition Version: 10.0 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 Settings dir: C:\Users\Glynn Myers\AppData\Roaming\FileZilla\

Actually filezilla seems to accept only the private keyfile stored in the default settings from putty. The log shows that it checks only this one and not all keys added to pageant - so I always have to change putty's default settings if I want to access a server with a different keyfile. It will be more convenient to allow the preselection of the keyfile in the servermanager for each account separately. Maybe this could be achieved in a similar way like pscp which accepts a commandline like this one which I use from a perl script to update a file directly from an SciTE or Geany: pscp.exe -i keyfile -l user "localpath" host:remotepath. If the keyfile is loaded in pageant it will be used without an additional passphrase request.

Since I moved from a city to rural satellite Internet which has both peak and off-peak data usage allowances, I've been having to stay up until the off-peak time kicks in to start my filezilla queues (system backups, updates, etc).

I was hoping there would be a process queue schedule feature in Filezilla by now, but since there isn't, I decided to dive into the source and hammer one in.

I've included my patch to the svn revision 4558. It seemed to work on my workstation here which is running Fedora 16.

I normally do work in C, not C++

It's a rather simple on/off schedule mechanism. Go into the Edit menu -> Preferences and look for the new "Queue" page. You can either:

• set filezilla to start processing the queue on startup (useful to create a queue, exit, and just schedule filezilla to start later with system level scheduler such as at)

and/or

• enable scheduling (in which case you put a start and end time in the appropriate fields, 24 hour time, so midnight is 00:00)

Then create your queue, and leave filezilla running and the queue should start and stop processing at the specified times.

Filezilla is way more useful selecting specific files and managing the queue than command line clients, but needs a touch of automation (which is what computers are for).

Hi,

I know about this bug very long time and I have still hoped that this bug will be fixed in new a release but I have mistaken. :)

So where is the problem ? I will write how reproduce the bug.

Create direcory e.g. test/ and in this direcory create directory .svn/ (or file .svn), turn on "Directory listing filters" and create filter which will filter .svn direcory(or file) and try upload this direcory. Filezilla doesn't upload this directory.

It works with any number of filtered items. But if directory contain some or only one unfiltered dir or file, then the directory will be uploaded.

It affects downloading as well and when You try delete that directory with filtered dir or files on FTP!, Filezilla doesn't delete that folder.

Currently with the IP filter there is no way to tell what IP is for what purpose/person, it is just a big ugly list. This makes it near impossible to manage unless you maintain a separate list of the IP's and who they belong to. So giving an IP temp access or trying to remove access later is a royal PITA.

It would be more useful if each IP could have a label with it to identify what it is for. So have it in a MULTIPLE SELECT list rather than a text area so IP's can easily be selected and removed e.g. 1.2.3.4 - ACME.com temp access for support 2.3.4.5 - Head office 3.4.5.6 - Dave - Contractor

It would also be very handy if IP filters could have rules.

e.g. Allow Indefinitely Allow for x days then disable Allow for x days then remove

every time a timeout occurs and the upload is stopped and reinitiated the resulting file is larger than the original file

at least an option to avoid the resume in the preferrences will be great this way if an upload fail it will start over again and no resume

your resume code has problems at least with Filezillaa and my ftp server

thank you ( chukran )

Alladin

Time in log files is in GMT, not local. For example, there is a log entry "2021-09-18T10:53:00.059Z << [FTP Session 140..." In my case, local time would be 2021-09-18T13:53:00.059 +0300

I suggest an option to use GMT or local time in server's Logging settings

According to this wiki page ​https://wiki.filezilla-project.org/Command-line_arguments_(Server) there are several CLI arguments. It seems as if this page is outdated as almost non of the parameters work:

C:\Program Files\FileZilla Server>filezilla-server.exe /start 2021-09-24T11:29:05.689Z !! Unhandled option: /start

C:\Program Files\FileZilla Server>filezilla-server.exe /stop 2021-09-24T11:27:27.391Z !! Unhandled option: /stop

Hi,

I encounter sevral problems to configure the server via the administration GUI, the keyboard navigation could be difficult and the screenreader NVDA version 2021.3.1 doesn't work with all components of the GUI.

The biggest problem is the datagrids, for example the configuration for users dirrectories access but all components of this type are problematic. When I use the "tab" key to focus this type of elements it's not possible to move in it with keys or to quit it with "tab" (I must use a shortcut). So it's not possible to select an item in the array and to configure it correctly, this is a big regression cause with the old GUI these problems wasn't present. Also, the datagrids are not announced correctly by the screenreader if I try to modify something in it, I must exit the settings and reload them to have a small access.

Also, when I add a new user or with the list elements of this type, the focus is blocked in the list with the possibility to up or down the selected item but I haven't access to the other options and, if I navigate without adding a nex element, I can't move up or down the selected element. I don't know if this happen also when I modify or copy the selected element but it's also a big problem.

An other problem, the dialog box creation for a SSL certificat has a strange behaviour with the tabindex so it's realy difficult to use it only with the keyboard.

I've also see something that I haven't understand, in the user configuration in the "General" tab, my screenreader indicate me a combobox just after the password field (always using "Tab" key to navigate) but I can't interract with it.

In conclusion the old interface was realy better for the accessibility and keyboard navigation, using a contextual menu in lists was far better than this new interface, etc..., this new interface is probably more modern than the old one but very less usable for visualy impaired people or for those who don't use the mouse. I hope this can be fixed, I realy apreciate Filezilla Server but for now the only solution that I have found is to install an old version (under 1.0.0), configure it and reinstall a new version but if I want to change something it could be realy difficult.

Best regards and keep up the good work.

Using the Administration Interface (v1.6.1) when multiple transfers are happening and I resize the main window or just the transfer window the display of the current transfers disappears.

I have included a link to a video showing this problem: ​https://youtu.be/xx99wSGvrG4

Hello, My filezilla program refuses to download videofiles from my humax 5200c when in the name german letters are used like the ringel-S β or signs like ö and like this. Using my microsoft internet exployer i can download them without problems. Can you fix this bug? Greetings, Peter

When transferring at least two files in parallel from the filezilla client to an SFTP-server and I enable speed limits by using the right-click menu at the bottom right, the queued files list freezes. During that time all transfer bars and speed indicators are frozen and do not update most of the time. For short periods of time the indicators may unfreeze for a few seconds until they freeze again. If speed limits are disabled then the queued list is unfrozen.

It will be good to show the status of the download/upload process on the taskbar, instead of just showing FileZilla label, so it's possible to check the progress without the need to restore the window.

Steps to reproduce:

• connect to a server
• wait some time, so the connection times out
• upload a file: filezilla will automatically reconnect in order to upload the file
• wait until the upload finishes

Expected result:

• the remote directory listing should automatically be refreshed and you should see the file you just uploaded

Observed result:

• the remote directory listing is NOT refreshed, and you don't see the file you just uploaded

In the console window where you see all the commands and responses, you do see a message saying "directory listing succesfull", so I guess filezilla does retrieve the listing but it fails to show the updated directory listing in the display on the right.

If you manually refresh using the refresh button, then you'll see the directory listing refreshed including the just uploaded file.

This only happens when you upload a file after the connection has timed out (and filezilla automatically reconnects). If you are already connected when you do the upload, then the refresh does work correctly and you seen the refreshed list as soon as the upload is finished.

I accidentally dragged over the wrong folder to transfer to my computer (huge number of files and folders in it), and I clicked the Cancel button (red flag with X in it) but it did nothing, then I clicked the Disconnect button (mouse with X over it), and the files kept transferring. I had to close FileZilla to get it to stop (which thankfully stopped the process).

Are these buttons not actually supposed to cancel a transfer or disconnect from the server? If I'm not using it contextually correctly, what exactly is the "current" server it refers to if they're highlighted? I was actually only connected to one server at the time.

Running FileZilla on a Win7 netbook with a screen resolution of 1024 x 600 is no problem. However, when checking for a software update, a new window pops up (indicating that a new version is available), but the buttons allowing to choose to install this update (or cancel) are not visible (should be at the bottom of the screen), and there is no way of navigating there (the window is taking up the full screen height already, but no scrollbar appears).

With the latest version I have 3.10.2, now there is automatic scrolling of folders with drag and drop but if the window is not huge, it is almost impossible to actually select your target! It keeps scrolling away. I think this is from the fix for ticket #132. It did not use to scroll at all, which I understand is a problem, but now it scrolls too much. I use this everyday and think it is great, but now it is much more difficult. I've been writing code for over 20 years.

i have many (for example 100) bookmarks in FileZilla for my site. it is undesirable for me to work with a confused bookmark list :|

i suggest you to add categorize feature to bookmark part of Filezilla.

The current versions of FileZilla and the FileZilla Server Interface have some colour issues. I recently changed my computer's colour scheme to be mainly white-on-black. Unfortunately it seems some of the text has been hardcoded to black, so I can't see any of it!

Is it possible to have it use the Windows theme-colours, or provide a customization option somewhere?

Hi everyone,

I've just managed to make my patch working so I share it with you: ​https://github.com/tdubourg/filezilla-encrypted

I've been using Filezilla for a long time now but I have always been concerned about the really low level of security it provided regarding to password storage - that is to say, no security (clear text). On Windows there are even now malwares that have been targeting Filezilla sitemanager.xml file....

So as I spare had time 2 days ago I decided to make a patch.

Here is what currently works:

• Turning on password encryption in the settings window and entering the master password.
• Storing the master password (encrypted using itself as password key) in the FileZilla.xml options
• Turning off password encryption...
• Starting filezilla in password encrypted mode and entering the master password at the start up of the application (if the user does not want to enter any password then FileZilla will close).
• Building on GNU/Linu x86

I use the Crypto++ cross platform library which has integrated packages for most GNU/Linux distributions and has a non-viral license.

What I would need help for, in order to finalize this patch:

• Explanations about the build process of FileZilla. I added a class called CCrypto (following the current naming conventions in the source code) and for now I edited manually the makefiles to get it building but that's just a quick-dirty-fix and we have to put the right things in the right place for autoconf and libtool to recognize everything. Same for the -lcryptopp option. I need to know how to add this new dependancy.

• Light help on handling password fields. For now I use text fields and this not very pretty :)

• Information about possible edge cases that come as a consequence of the changes I made (in terms of dealing with password in filezilla, I'd need to know if there are some tricky part of filezilla dealing with passwords that I should have a look at, to make sure the patch is compatible)

What still needs to be developped:

• Converting the password when changing the master password (decrypting them with the former one and encrypting them again with the new one).
• Decrypting the passwords when the user turns off the encryption

For now these two cases obviously end up with encrypted passwords that are not decryptable (because no master password or master password has changed).

What could be improved : Randomly generating a salt / iv (instead of hardcoded ones) when turning on encryption and then storing them in the settings file.

I am using AES by the way.

This patch is not intended to provide military security. It is intended to provide standard security that should be implemeted in every software storing password (like Firefox, Thunderbird, Opera... and even WinSCP (that has a CRAP UI but master password feature !!!).

I do not provide a patch file for now but you can see the changes I made by searching for the string "@td". That's a tag that I put where I make changes.

BTW I do not know if I can branch the SVN repo instead of holding the stuff on Github...? I think I need additional rights for that.

Add the Right Mouse Button actions menu in the Edited Dialog (Ctrl+E) please, and hotkey ctrl+a. coz its very slow to use buttons/

It would be cool if there was download graph with five lines, 1) current download spead (kb/second), 2&3) download progess current file (percent and Mb), 4&5) total download for the Que (percent and Mb).

Like a polygraph, the pens draw the line from right, and the history(paper) scrolls left.

Admitedly trivial utility, but it would be cool!

-Nathaniel

I used to use Bullet Proof FTP. In BPFTP, all FTP actions are queued, even things like renaming and deleting files. This can be very handy when working with large numbers of files.

It would be nice if FileZilla could do this also. For example, I could queue deletion of one file, then go to another directory, queue deletion of another file, then queue a couple of uploads, queue a file to be renamed, and then click Process Queue and wait while it does all of those actions at once. It saves time if you already know what you're going to do, because you don't have to wait for each action to complete before you select the next one.

Keep up the great work!

I'm sitemanager at a site where we publish articles and rewiews twice a week. My problem is, I have to stay up until 24:00 when a new article / rewiew is to be published. Is there any chanse to add a feature where I can schedule a transfer of the queue? If so, I could add the files neccesary to the queue and select a date / day / time for processing the queue. Also, I suggest that this feature takes care of connection / disconnection when the selected time occurs. An example:

at 24:00, the program connects to the server, process the queue and then disconnect. If any problems occur, a warning message including the errors pops up. When I wake up, I will see if the transfer was successfully - and if not, I will know what the problem was.

This would help me a lot!

Regards, Vidar Fagerjord, siteadmin.

a little function to indicate the allowed size on the server (quota). The actual size of files and the maximum size. it's great when we upload big file, and we have no more place !

Please add file/direction description field on remote site view. Read the #index.txt or 00index.txt format description...

1. using multipart transfer, we can divide one file into

several part, transfer each part individualy and simultaneously, then merge then into one file.

2. using multi-proxy transfer, we can transfer several

files or several part of one file at the same time with a server that has session limited per IP. For example, we have a server X allow only 1 session for one IP, and we have 4 proxy a, b, c, d. We can transfer file1 from X directly, and transfer file2 simultaneously through a, transfer file3 through b, and so on. Or transfer part1 of a file from X directly, part2 of that file through a, and so on. This can break the session limition of the server, especially with speed limition per session. Of course, some strategy may be included, e.g. how many session per IP is allowed for the server, which proxy can be used as one of multi-proxy, distribute one transfer task to as many proxy as possible first or to one proxy as possible as server support first.

I would like to see on the fly threads changing. For example, i can pick how many threads should be opened for download/upload on the fly instead of going to settings. Something like LeechFTP would be nice :) keep up the good work

Be nice to have hotkeys to change the directory of the remote window and the local window (Ctrl+D, Ctrl+E or something like that).

Aaron aheck@…

It would be cool that filezilla accept data on HTTP protocol. (download and resume)

doubleclicking the label "Local Site" should bring up a browse window to locate a folder quicker, as the normal treeview/address is too small, especially because of the vertical layout and the remote view. also, "Desktop" should be one of the options

It would be great if rsync was built into FileZilla such that local and remote machines can be synchronized and mirrored to.

​http://rsync.samba.org/

When uploading using the "overwrite if newer" option it is hard to tell when a file is skipped. If there was a mention of the skipping in either the console or queue or both it would be great.

While downloading several thousand small (few KB) files, I turned on 4 simultaneous connections to speed it up. When downloading such small files, the speed is held back by waiting for the server to start sending each file, so by running many at once, the overall transfer speed stays more constant.

I had to pause the download, so I unpressed the Process Queue toolbar button. Then when I resumed it, I got some failed transfers. Files were created with the right names, but with 0 bytes, and they were removed from the queue. As a result, I'm going to have to start the transfer all over again to be sure I get all of the files. :/

I was going to report a bug, but there is a problem: With multiple connections, you can't tell which commands and responses are on which connection, so you can't figure out which transfers failed! I have included an example at the bottom.

As you can see, it's impossible to tell which commands and responses are for which connections, so you can't tell which ones are failing and which are succeeding. A simple change to something like:

[1] Command: [1] Response: [2] Command: [4] Response: [2] Response: [4] Command: [3] Response:

Would show which commands and responses are for which connections. They could also be color-coded. Also, you could use a drop-down box to choose which connections' logs you wanted to see in the log pane.

If this is implemented, maybe we can track down this bug that caused the zero-byte files.

Thanks.

Status: Starting download of /levels/files/ssi/340_ratings.ssi Command: TYPE I Response: 200 PORT Command successful. Command: PORT 192,168,0,191,10,148 Response: 200 PORT Command successful. Command: PORT 192,168,0,191,10,149 Response: 200 Type set to I. Response: 425 Try later, data connection in use. Command: PASV Status: Download successful Status: Starting download of /levels/files/ssi/340comments.ssi Response: 425 Try later, data connection in use. Error: Download failed Status: Starting download of /levels/files/ssi/340_ratings.ssi Response: 425 Try later, data connection in use. Command: PASV Command: TYPE I Response: 200 PORT Command successful. Response: 200 Type set to I. Error: Download failed Status: Starting download of /levels/files/ssi/340.ssi Command: TYPE I Command: TYPE I Response: 200 Type set to I. Error: Download failed Status: Starting download of /levels/files/ssi/34_ratings.ssi Command: TYPE I Response: 200 PORT Command successful. Command: PORT 192,168,0,191,10,150 Command: PORT 192,168,0,191,10,151 Response: 425 Try later, data connection in use. Command: PASV Response: 200 PORT Command successful. Response: 200 Type set to I. Command: PORT 192,168,0,191,10,152 Command: PORT 192,168,0,191,10,153 Response: 227 Entering Passive Mode (66,208,97,18,14,64) Command: RETR 340.ssi Response: 200 Type set to I. Error: Download failed

Can you add possibility that FileZilla show percent of downloaded/uploaded stuff in title, so it can be seen when minimized? (or tray icon, that will show percent?)

Thanks and keep up good work!!

Regards Zoran, Serbia (Europe)

would be nice if there was some option to "move" (like download and delete from source) file instead of default copy...

thanks, filezilla rules ;)

It was suggested that I take these suggestions which I wrote out in the public forums, and put them up individually in the Tracker. So, here I go - 9 feature requests, all individually posted.

#4 - If you've ever used CuteFTP Pro, you know what I mean by this: have the file system tree as a drop-down rather than a seperate pane on the local side. Gives more real estate to the file list.

It was suggested that I take these suggestions which I wrote out in the public forums, and put them up individually in the Tracker. So, here I go - 9 feature requests, all individually posted.

#6 - Windows Explorer style nav buttons over panes, like "back" and "up one level". With that, the ability to hide the ".." in the file list would be nice.

It was suggested that I take these suggestions which I wrote out in the public forums, and put them up individually in the Tracker. So, here I go - 9 feature requests, all individually posted.

#9 - CuteFTP and WSFTP site import. I spent about 30 minutes converting my CuteFTP ini file to the proper XML format, so I know it can be done automatically. And yes, the 30 minutes was a time savings, with the number of sites I had to set up.

in taskbar minimized mode :]

An option to set default file attributes when uploading files. Would be most useful for website uploading. Best would be individual settings for each site.

Hi, I use FileZilla for thanks.

My Last favor is that I want know the remain time

without clicking on Filezilla icon on TaskBar on the bottom of screen.

If there are multiple file that download or upload, show

the longest left time in title like attached ScreenShot.

Briefly, I want know when Network is ready :D

Thanks for reading.

I'd like FileZilla to be able to delete from the server the files that no longer exist on my PC. Then when I upload my website, I know that any changed filenames or whatever will not leave wasteful orphaned files on the server.

This suggestion is similar to others: *the rsync one (755621) *file synchronisation (721808)

and differs in that I would not expect FileZilla to delete any local files. It is likely that my suggestion could be rolled up with 721808, i.e. FileZilla would provide a website upload capability that worked by file synchronisation to make all the server files a proper subset of the local files.

As a user, one of the main features that I need with FTP clients is a simple, saved list of all things that are uploaded and downloaded, from where, to where, and when. I can get that by setting the Debug list to save to a log file - but it doesn't say where thing come from or go to, it doesn't say when, and (most importantly), it's cluttered with all sorts of other things I don't need so that it quickly turns into an absolutely huge file I can't use.

The best example of the type of log file I'm looking for is provided by WS_FTP. I attached a sample of the kind of thing I'm looking for.

Is there any way we can have FileZilla automatically create a simple text file like this, so I can see at a glance that (say) I did download the wna_site.mdb database, and then uploaded it again 15 minutes later.

usefull for the most repeated task (for some kind of happieness)

it would be nice, if the font of the log window could be configured somewhere in the "appearance" part of the options menu.

the default font is currently something like "times new roman".

i would suggest to change the default font in the log window to "courrier" or any other font where the characters have equal widths.

many ftp sites use ascii-art welcome messages and other information ouput, which is specially layouted for fonts which have characters of equal widths. with the current font configuration they are quite hard to read.

thanks a lot for that great software!

Hello, I love your idea of a global connection retry / login delay in the connection settings! Could you install an option for each individual ftp site so you can manually put in a non default retry delay incase it has to be set to the non default option.

I.E. global retry delay is 50 seconds. For ftp.sourceforge.net you can set it for 2 minutes via a 'non default' option withing the ftp.sourceforge.net.

Thanks

It would be useful if the Reconnect item (under File) were to indicate choices of sites previously connected to.

Thanks,

Luigi Bianchi

Currently, the local treeview doesn't display the folder of My Network Place. So user can access the local intranet by local treeview.

When server is full FileFlash automatically retries to connect to FTP server. Sometimes it can take quite a while before the connection is established and users usually do other things when waiting. During this time the FileZilla window is begind other windows. So when FileZilla connects to server it would be nice if its taksbar button flasshed so that users can see that something happened in the FZ window.

Currently when viewing either the local or remot directories it is in the "list" view. I would like to see over views added like "licons". (basicly making it move like windows where you can have your folder views many diffeant ways)

Filezilla will not work through Microsoft ISA Server with NTLM authentication required.

Mozilla, including Mozilla FireFox does support NTLM auth for the HTTP proxy, so the code could be taken from there.

There is also a Python program APS that will work. It belongs here: ​http://www.geocities.com/rozmanov/ntlm/

It references a description of the protocol here: ​http://www.innovation.ch/java/ntlm.html

At present, the only time stamp is when FileZilla is started. I request that each event is time stamped. Also, a request that average transfer speed should be logged. The two items are linked and it can be calculated manually if required so long as one item or the other is put into the log file.

Cheers SeismicBod

When uploading lots of small files for websites (especially PHP coded sites) I've encountered times when several files are corrupted. For PHP sites, this usually breaks some part of the site.

Is it possible to have an option to make Filezilla verify uploaded files (or at least double-check the file sizes?)

Thanks!

What would be a cool addition to a super-cool program, would be the ability to designate a connection as a mirror to another connection. so that whatever you do to one connection (Send / Rename / Delete), it will also do to its mirror connection.

Many thanks, with kind regards,

david

How about an option to avoid the question: 'Break current connection?' when changing ftp sites.

I use FileZilla with many different sites, very frequently switching between them. Removing this message would make things a fair bit smoother.

Cheers,

Tim

I know there's already at least one feature request asking for this, but it's been almost 3 years and is unresolved.

I prefer not to hammer any servers I'm downloading from with multiple connections, and would like to see this setting become persistent, and ideally should be disabled initially.

HI,

is it possible to do a quick fix for UNC path support on the remote site.

"
pcname\share" should result in "CWD
pcname\share" instead of "cwd drive:/pcname/share".

thanks in advance

maik

Please include a function that allows you to change the name of a file when uploading it without having to change the source file´s name. This is usefull when the source system does not allow long filenames.

Autohide queue window when there is nothing in the que so that there is more screen space for the interesting bits.

Having a option to allow only one instance would stop accidentsly opening more then one instance of FileZilla (useful for people who have only one target site, and would hence rarely need more than one instance).

​http://optionalreaction.com

Optional) registration as the default URL handler in windows may be added with a registry addition similar to:

--BEGIN-- REGEDIT4

[HKEY_CLASSES_ROOT\sftp] @="URL:sftp Protocol" "URL Protocol"=""

[HKEY_CLASSES_ROOT\sftp\shell]

[HKEY_CLASSES_ROOT\sftp\shell\open]

[HKEY_CLASSES_ROOT\sftp\shell\open\command] @="\"C:
Program Files
FileZilla
FileZilla.exe\" \"%1\"" --END--

Allowing FZ to register itself for FTP and SFTP URLs would be useful.

For SFTP, this is potentially blocked by this bug: ​http://sourceforge.net/tracker/index.php?func=detail&aid=1454179&group_id=21558&atid=372241

Under the general topic of managing huge downloads more efficiently:

It would be very helpful if there were a way in the front-end of the FileZilla client to turn the speed limiter on and off. Instead, one must go into the preferences.

A very good example of a program that manages bandwidth well is uTorrent. You can set up a schedule in a graphical way that is more intuitive than FileZilla's schedule rules. You can also turn the schedule on and off in the front end by right clicking in the lower status bar. Finally, uTorrent does some very interesting and convienent things with download prioritization.

In the context of the FileZilla interface, it would probably be more consistent to add a button in the main toolbar instead of a context menu in the status bar, though adding both wouldn't hurt.

Additionally, it would be helpful if you could apply speed limit rules on a per-file (or per-directory) basis to limit certain downloads and not to others in the queue.

For instance, let's say I'm downloading a huge DVD ISO of a Linux distro. This will take several days on a slow DSL connection. Rather than sucking up my bandwidth for days on end, I'd set a speed limit. Now, in the middle of this big download, I need to pull down some work-related files. Rather than pausing the big download, turning off the speed limiter, initiating the new download, waiting for it to finish, and restarting the big download again with the speed limit rules, it would be better if I could right-click the big download and simply apply the speed limit to it alone, leaving the new high-priority download to utilize the remainder of my available bandwidth.

I hope this makes sense. I am happy to discuss the feature request further. I'm 'ixnayus' at gmail. Thanks for all your work on a great product.

Many thanks, Steve

It would be nice if there was a "Browse..." button next to "Default remote directory" on the Advanced tab of the Site Manager. Since (if) the log in information is already supplied on the General tab, Filezilla (I guess) could log on to the server and retrieve the directory tree, and using that information create a "Browse for Folder" dialog such as the one opened when clicking the "Browse..." button next to "Default local directory".

You view the content of a folder (on your PC). Then this content is changed (for instance a file is copied to this folder). Now FileZilla will not display the changes until you switch to another folder and then go back to the one you have been in before.

It should show the changes immediatelly (as for instance Windows Explorer does).

It would be nice if directories that still haven't been opened had the little plus sign beside them by default, which would then act as if the directory itself was clicked if there is nothing to actually collapse.

It would save the extra click from doubleclicking the folder every time, and it would make it consistent with Explorer's behavior in some situations where it doesn't know what's in the folder.

Filezilla forget the download/failed/succesfull Queue after closed the client

It should be viewable after close / restart.

In the window for customizing file associations, filezilla shows an example command line instruction for creating the association. The instruction for the mac version starts with c:\program files\... which is for Windows OS instead of MacOS.

FZ currently allows users to define the max simultaneous transfers (1-10) as well as concurrent downloads/uploads. Please add the ability to define concurrent download/uploads on server-basis. The goal is to have 1 download or upload running per server I have in my queue.

Let's say I have 100 files queued to download across 3 different servers. The expected behavior is to have 3 downloads running simultaneously with 1 from each server running. Currently, a global setting of 3 doesn't allow this.