Custom Query (4044 matches)

Started update check on 2019-01-01 18:44:06 Own build type: custom Downloading /update.php?platform=x86_64-pc-linux-gnu&version=3.33.0&cpuid=sse,sse2,sse3,ssse3,sse4.1,sse4.2,avx,aes,pclmulqdq,rdrnd&initial=1 Resolving address of update.filezilla-project.org Connecting to [2a01:4f8:171:1ce9::4]:443... Connection established, initializing TLS... GnuTLS error -50 in gnutls_priority_set_direct: The request is invalid. Failed to initialize TLS. File transfer failed

Following error message appears when attempting TLS login:

A packet with illegal or unsupported version was received.

TLS login worked fine until the most recent update to 3.56.0.

The messages below are received when trying to connect to an IBM zOS FTP server using explicit TLS (the product SmartFTP can successfully establish a secure connection):

Status: Resolving IP-Address for xxx.xxx.xxx Trace: ControlSocket.cpp(948): CRealControlSocket::ContinueConnect(01387750) m_pEngine=0112BE18 caller=013A6508 Status: Connecting to nnn.nnn.nnn.nnn:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220-FTPD1 IBM FTP CS V1R8 at xxx.xxx.xxx, 10:18:13 on 2007-09-23. Trace: CFtpControlSocket::OnReceive() Response: 220 Connection will close if idle for more than 5 minutes. Command: AUTH TLS Trace: CFtpControlSocket::OnReceive() Response: 234 Security environment established - ready for negotiation Status: Initializing TLS... Trace: CTlsSocket::Handshake() Command: USER xxx Trace: CTlsSocket::OnRead() Trace: CTlsSocket::Handshake() Trace: CTlsSocket::OnRead() Trace: CTlsSocket::Handshake() Trace: GnuTLS alert 40: Handshake failed Trace: GnuTLS error -12: A TLS fatal alert has been received. Trace: CRealControlSocket::OnClose() Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Error: Could not connect to server

I can provide the ip address to the server in case you wish to try this out.

Hi, I have Windows 2012 server with FTPS enabled and I can't connect with Filezilla in explicit mode active/passive but i can connect with Core FTP LE and this website ​http://www.net2ftp.com/index.php I have this error message :

Statut : Connexion établie, attente du message d'accueil... Réponse : 220 Microsoft FTP Service Commande : AUTH TLS Réponse : 234 AUTH command ok. Expecting TLS Negotiation. Statut : Initialisation de TLS... Erreur : GnuTLS error -110: The TLS connection was non-properly terminated. Erreur : Impossible d'établir une connexion au serveur

Hi,

Using Filezilla 3.53.1 and sessions cache limit with the new TLS session resumption seems to cause problems. (In order for a session to be restored, a cache of previous sessions needs to be maintained. Essentially, these cached sessions are the stored sessions that can be resumed.) There is a limit of 255 sessions in the cache on our server, which means that not all past sessions are capable of being resumed. I think client should definitely not generate an error because a server does not have a previous session recorded in its cache.

the option to "always trust certificate in future sessions" is grey'd out meaning one has to ok it everytime he logs.

Suggest adding the following enhancements to navigation of tabs:

ctrl-tab should wrap around from the last tab to the first, vice versa for shift-ctrl-tab

ctrl-pgup/ctrl-pgdn should also switch tab, per Windows convetion

rolling the mousewheel over the tab bar should also switch tab -- not convention, but used in a few apps and very useful :)

Hello!

I am totally in love with this client and have been using Firezilla for more than an year now but your latest version is so disappointing. It takes some 10 seconds to refresh my local files and the remote ones. It just goes on loading and then refreshes. This also happens when I delete a file.

Please fix this as soon as possible.

Thank You!

Vatsan

I am using the most current Filezilla version. I transferred the file 1harry.html onto my Website ​http://www.igs.net/~awhp. The file 1harry.html shows 1,190 as the file size from my computer files and 0 when I upload it to the site. I double click on 1harry.html to upload and get the window twice "Target file already exists," with action as "Overwrite" since I'm attempting to upload an updated version of 1harry.html. The transfer starts at Queued Files, looks like it's transferring with the numbers increasing. The message at the bottom says,"Failed transfers(1) and the message "Could not start transfer." Before, the upload would say successful but show the new file size as 0. I have checked the forums and attempted all the recommendations listed but without success. This issue has been ongoing for three weeks.

Log: Status: Resolving address of www.igs.net Status: Connecting to 206.80.254.73:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220---------- Welcome to Pure-FTPd ---------- Response: 220-You are user number 1 of 50 allowed. Response: 220-Local time is now 02:41. Server port: 21. Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Trace: CFtpControlSocket::SendNextCommand() Command: USER awhp Trace: CFtpControlSocket::OnReceive() Response: 331 User awhp OK. Password required Trace: CFtpControlSocket::SendNextCommand() Command: PASS Trace: CFtpControlSocket::OnReceive() Response: 230-User awhp has group access to: awhp Response: 230 OK. Current restricted directory is / Trace: CFtpControlSocket::SendNextCommand() Command: SYST Trace: CFtpControlSocket::OnReceive() Response: 215 UNIX Type: L8 Trace: CFtpControlSocket::SendNextCommand() Command: FEAT Trace: CFtpControlSocket::OnReceive() Response: 211-Extensions supported: Response: EPRT Response: IDLE Response: MDTM Response: SIZE Response: REST STREAM Response: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; Response: MLSD Response: TVFS Response: ESTP Response: PASV Response: EPSV Response: SPSV Response: ESTA Response: 211 End. Status: Server does not support non-ASCII characters. Status: Connected Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: Measured latency of 104 ms Status: Retrieving directory listing... Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/" is your current location Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: TYPE I Trace: CFtpControlSocket::OnReceive() Response: 200 TYPE is now 8-bit binary Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (206,80,254,73,67,121) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: MLSD Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Accepted data connection Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226-ASCII Response: 226-Options: -a -l Response: 226 15 matches total Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: CWD .public_html Trace: CFtpControlSocket::OnReceive() Response: 250 OK. Current directory is /.public_html Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/.public_html" is your current location Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (206,80,254,73,34,233) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: MLSD Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Accepted data connection Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CFtpControlSocket::OnReceive() Response: 226-ASCII Response: 226-Options: -a -l Response: 226 Output truncated to 2000 matches Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Resolving address of www.igs.net Status: Connecting to 206.80.254.73:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220---------- Welcome to Pure-FTPd ---------- Response: 220-You are user number 2 of 50 allowed. Response: 220-Local time is now 02:44. Server port: 21. Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Trace: CFtpControlSocket::SendNextCommand() Command: USER awhp Trace: CFtpControlSocket::OnReceive() Response: 331 User awhp OK. Password required Trace: CFtpControlSocket::SendNextCommand() Command: PASS Trace: CFtpControlSocket::OnReceive() Response: 230-User awhp has group access to: awhp Response: 230 OK. Current restricted directory is / Status: Server does not support non-ASCII characters. Status: Connected Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: Measured latency of 110 ms Trace: CFtpControlSocket::FileTransfer() Status: Starting upload of C:\Users\MikeandMatt\Documents\AWFiles\1harry.html Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: CWD /.public_html Trace: CFtpControlSocket::OnReceive() Response: 250 OK. Current directory is /.public_html Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/.public_html" is your current location Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: FileTransferSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: FileTransferSend() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: TYPE A Trace: CFtpControlSocket::OnReceive() Response: 200 TYPE is now ASCII Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (206,80,254,73,145,101) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: STOR 1harry.html Trace: CTransferSocket::OnConnect Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 150 Accepted data connection Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CFtpControlSocket::OnReceive() Response: 450-Error during write to file: No space left on device Response: 450 1harry.html partially uploaded Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: FileTransferSubcommandResult() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Error: File transfer failed Trace: CFtpControlSocket::FileTransfer() Status: Starting upload of C:\Users\MikeandMatt\Documents\AWFiles\1harry.html Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: FileTransferSubcommandResult() Status: Retrieving directory listing... Trace: ftpcontrolsocket.cpp(1317): List called from other command caller=0p60d6ea8 Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: TYPE I Trace: CFtpControlSocket::OnReceive() Response: 200 TYPE is now 8-bit binary Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (206,80,254,73,248,130) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: MLSD Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Accepted data connection Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CFtpControlSocket::OnReceive() Response: 226-ASCII Response: 226-Options: -a -l Response: 226 Output truncated to 2000 matches Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: FileTransferSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: FileTransferSend() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: TYPE A Trace: CFtpControlSocket::OnReceive() Response: 200 TYPE is now ASCII Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (206,80,254,73,43,94) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: STOR 1harry.html Trace: CTransferSocket::OnConnect Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 150 Accepted data connection Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CFtpControlSocket::OnReceive() Response: 450-Error during write to file: No space left on device Response: 450 1harry.html partially uploaded Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: FileTransferSubcommandResult() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Error: File transfer failed Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: TYPE I Trace: CFtpControlSocket::OnReceive() Response: 200 TYPE is now 8-bit binary Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (206,80,254,73,163,171) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: MLSD Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Accepted data connection Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CFtpControlSocket::OnReceive() Response: 226-ASCII Response: 226-Options: -a -l Response: 226 Output truncated to 2000 matches Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Disconnected from server Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Status: Resolving address of www.igs.net Status: Connecting to 206.80.254.73:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220---------- Welcome to Pure-FTPd ---------- Response: 220-You are user number 2 of 50 allowed. Response: 220-Local time is now 02:49. Server port: 21. Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Trace: CFtpControlSocket::SendNextCommand() Command: USER awhp Trace: CFtpControlSocket::OnReceive() Response: 331 User awhp OK. Password required Trace: CFtpControlSocket::SendNextCommand() Command: PASS Trace: CFtpControlSocket::OnReceive() Response: 230-User awhp has group access to: awhp Response: 230 OK. Current restricted directory is / Status: Server does not support non-ASCII characters. Status: Connected Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: Measured latency of 109 ms Trace: CFtpControlSocket::FileTransfer() Status: Starting upload of C:\Users\MikeandMatt\Documents\AWFiles\1harry.html Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: CWD /.public_html Trace: CFtpControlSocket::OnReceive() Response: 250 OK. Current directory is /.public_html Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: FileTransferSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: FileTransferSend() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: TYPE A Trace: CFtpControlSocket::OnReceive() Response: 200 TYPE is now ASCII Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (206,80,254,73,254,15) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: STOR 1harry.html Trace: CTransferSocket::OnConnect Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 150 Accepted data connection Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CFtpControlSocket::OnReceive() Response: 450-Error during write to file: No space left on device Response: 450 1harry.html partially uploaded Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: FileTransferSubcommandResult() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Error: File transfer failed Trace: CFtpControlSocket::FileTransfer() Status: Starting upload of C:\Users\MikeandMatt\Documents\AWFiles\1harry.html Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: FileTransferSubcommandResult() Status: Retrieving directory listing... Trace: ftpcontrolsocket.cpp(1317): List called from other command caller=0p60d6ea8 Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: TYPE I Trace: CFtpControlSocket::OnReceive() Response: 200 TYPE is now 8-bit binary Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (206,80,254,73,250,106) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: MLSD Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Accepted data connection Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CFtpControlSocket::OnReceive() Response: 226-ASCII Response: 226-Options: -a -l Response: 226 Output truncated to 2000 matches Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: FileTransferSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: FileTransferSend() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: TYPE A Trace: CFtpControlSocket::OnReceive() Response: 200 TYPE is now ASCII Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (206,80,254,73,75,209) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: STOR 1harry.html Trace: CTransferSocket::OnConnect Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 150 Accepted data connection Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CFtpControlSocket::OnReceive() Response: 450-Error during write to file: No space left on device Response: 450 1harry.html partially uploaded Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: FileTransferSubcommandResult() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Error: File transfer failed Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: TYPE I Trace: CFtpControlSocket::OnReceive() Response: 200 TYPE is now 8-bit binary Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (206,80,254,73,205,4) Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: MLSD Trace: CTransferSocket::OnConnect Trace: CFtpControlSocket::OnReceive() Response: 150 Accepted data connection Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CFtpControlSocket::OnReceive() Response: 226-ASCII Response: 226-Options: -a -l Response: 226 Output truncated to 2000 matches Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Disconnected from server Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66)

When I download a folder containing thousands of files and sub-folders I receive a lot of "Target file already exists" pop-ups. I am downloading into an empty folder, so apparently FZ is trying to download the same file twice. I can see from the timestamp of the "already existing" file that it has just been downloaded, but now the file apparently is being downloaded again. I have also observed, that the file that is to be overwritten is smaller than the source file, i.e. the file wasn't transferred fully, but I did not receive any error messages. What is going on? I am really worried if I can trust that everything has been downloaded correctly.

I needed to update the index.html file to reflect new information. I dragged the new version from local site to remote site.

I got the "Target file already exists" dialog, which is set to overwrite. I did not click OK yet, because I was waiting on confirmation regarding the updated information. Target file size was similar to that of source file, since little information was added.

I left the computer for just under 30 minutes with the overwrite dialog still on screen (this was an accident). The connection was active when I left the computer.

When I returned, the dialog was still there and the connection was no longer active.

However, I noticed that the actual website was blank (tested on a couple of devices and confirmed by third party). I cancelled the dialog that was still on screen and again I dragged index.html from local to remote.

Server reconnected and the overwrite dialog appeared once again. This time, the target file that was going to be overwritten (index.html) showed up as having a 0 byte size. This is consistent with the blank website I encountered through the browser. I OK that dialog and now the new and updated index is live, no problem.

Unfortunately, I was not able to reproduce this error myself, nor do I have the logs-because the client was set to not save them by default I believe, and I exited the program before deciding to submit a report. Still I thought this might warrant some looking into.

I did try searching for this bug but did not find it. It was a hard bug to search for, language-wise.

Each time I receive and install an update, a temp file is created in my temp directory called nsh505.tmp and I cannot delete this file from the folder. The only way it dissappears is to re-boot. Pleas advise...thank you

On new FileZilla_3.10.1, there is a temp files corruption problem with editing 2 files with same name.

I edit myftp/include/myfile.php I edit myftp/anotherpath/anotherfolder/myfile.php

Filezilla take my second file for my first file and see my first file as modified and ask me to update it on server ...

At the end result myftp/anotherpath/anotherfolder/myfiles.php = myftp/include/myfiles.php

This problem is not present in FileZilla 3.10.0.2 and previous ...

Myfile.php is open as temp file Myfile.php and /anotherfolder/Myfile.php as Myfile2.php

When select option for edit two files from a server with the same names, the 2nd is replacing 1st, and old is not uploading into server.

I use Filezilla to download the current release of a CMS system we have developed. I have verified that this problem is not in the download of these files but in the upload.

After download the files, I then upload the files to a domain with Filezilla. All files transfer fine and everything looks well, but when I try to access some of the files I have uploaded I get error messages from Firefox.

I then use Dreamweaver to check the script, and it appears that Filezilla has removed all of the linebreaks and whitespaces and characters spaces from many of the scripts.

I repeat I have checked the files after the download and they still have retained there formatting. It is only the uploading process that seems to cause this.

I use an old ftp hosted on a french free FTP server, specifically by free.fr (it's an ISP and offers ftp hosting). I have little clues how to know the FTP server version:

220 Serveur de mise a jour des pages perso de Free.fr version [Oct 30 2019 18:30:59]

I combine synchronized browsing with directory comparison.

For some reason, the file sizes, even though they are identical (I checked), are mismatched, which shows files being different when using the comparison feature. Those files are text files.

I suspect the issue might come from the FTP server sending erroneous, 1000 or 1024 rounded file sizes, or something similar.

OS is windows 10, filezilla 3.48.1.

I'm not sure if the filezilla team is very fond of this comparison feature, I'm not sure if it can be customized for my needs, but I really like this feature. The feature seems to work fine for jpg and PNG.

After upgrading FileZilla from version 3.12.0.2 to version 3.14.1 I'm noticing that sitemanager.xml gets malformed a bit:

• Within a <Server></Server> entry at the end the text that is in <Name></Name> gets appended.
• </Server> gets not indented correctly.

Whenever I right click and choose "Edit" menu for a file, for instance a txt file, although the file will open up in my Macbook Textedit app as usual, an error message following will popup says "Opening Failed.... 'file path' could not be opened: The Associated Command Failed".

File extension included txt php htm html etc.. Although I didn't setup any filetype association under the setting menu, it shouldn't behave like that. Also the filetype association command is not working too I had tried. It only happens in this latest app version for Mac.

When I click on the right side of the windows(Remote Website),if the folder name is chinese,then there will be another folder with messy code name,and the origional folder is still be shown in the list.

Repro Steps:

1. Open FZ and connect to a ftp server
2. Open one directory and create a folder with Chinese name, such as "格里"
3. Click the new added folder

Then the name is changed to unreadable code.

Delete and backspace keys do not work for:

Site Manager, Site Name, "Host" "Port" Change the Logon Type to Normal, then "User" has the same issue. "Comments"

These keys work perfectly for other sites, including in this field I am typing right now.

After I upgrade to the latest version ( v3.2.4.1 ) of the FileZilla Client, it just can't show non-English characters correctly. I see the "2009-04-14 - FileZilla Client 3.2.4-rc1 released" notes about "Always use MLSD to retrieve directory listings on servers supporting it". I think it cause this problem Is it possible to turn it off to avoid this problem? Or is it a bug?

Below are the logs. The connection is still open, but all I see is the ".." entry under the filename & <Directory listing failed> on the server side window. The Remote site: window shows the correct tree, which is the default directory I set up using the advanced tab from the Site Manager screen I used to define the FTPES connection. Other FTPES clients don't seem to have this issue connecting to this server. After I pasted the logs below, I attempted to change directories & again I got the same error as shown below. Though I did see the order of messages below the LIST command & the 150 response change sometimes.

Status: Resolving address of hetsft1.harrahs.org Status: Connecting to 10.3.5.87:21... Status: Connection established, waiting for welcome message... Response: 220 Secure FTP Server ready. Command: AUTH TLS Response: 234 SSLv23/TLSv1 Status: Initializing TLS... Status: Verifying certificate... Command: USER rms Status: TLS/SSL connection established. Response: 331 Password required for rms. Command: PASS Response: 230 Virtual user rms logged in. Command: SYST Response: 215 Cygwin Type: L8 Command: FEAT Response: 211-Extensions supported Response: CHMOD Response: IDLE Response: UMASK Response: HELP Response: AUTH Response: MIRR Response: RTCK Response: STCK Response: VERS Response: FEAT Response: CHPWD Response: PROT Response: PBSZ Response: APPE Response: XCRC Response: FEATURES Response: USER-AGENT Response: DISPOSITION Response: CCC Response: UTF8 Response: 211 END Command: OPTS UTF8 ON Response: 500 'OPTS UTF8 ON': command not understood. Command: PBSZ 0 Response: 200 PBSZ=0 Command: PROT P Response: 200 PROT command successful Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current directory. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (10,3,5,87,41,36) Command: LIST Response: 150 Opening BINARY mode SSL data connection for file list. Response: 226 Transfer complete. Status: Server did not properly shut down TLS connection Error: Transfer connection interrupted: ECONNABORTED - Connection aborted Error: Failed to retrieve directory listing

Hi,

I'am the user of FileZila client. And the version installed on my computer is 3.62.2.

I click on Update my FileZila client button to be sure have the last version and on the 2023-01-29 14h56 the FileZila Client say I have the last version.

It's false since two new versions has been made availables

It seem the FileZila Client client button about verification update does not work correctly.

3.63.1 (2023-01-26) Bugfixes and minor changes:

MSW: Fixed icon sizing issue on high DPI scale factors

3.63.0 (2023-01-24) Bugfixes and minor changes:

All official FileZilla binares now link against wxWidgets 3.2.1 Fixed a potential crash when closing FileZilla macOS: Fixed tree control scroll position not following the foucsed item macOS: Fixed an issue preventing translations into some languages to be loaded

I recently upgraded to the latest version of FileZilla. I think it worked after upgrading but a day or two later, I cannot open it anymore. It comes up saying "The application Filezilla quit unexpectedly"...

I've tried uninstalling and reinstalling it and the same issue occurs. The only time I got it to work was when I restarted my computer.

The only other thing is I also upgraded the software on my Mac recently... Could that have done anything?

Only the upper portion of the Title Bar moves the window. The entire Title Bar should move the window.

I use Windows 7 and everytime I scroll completely down on the client side to show the last file, Filezilla Client hangs up and all I can do is to close the process. So I won't be able to upload the last item to the server.

I had problems with accented letters with Filezilla client freshly downloaded last friday, on a Windows 7 (which I expect to use unicode for filenames).

HYPOTHESIS both of the bug and what is causing it ;-)

I believe that if the filename contains a 'e acute' with unicode value 0xE9 and so have UTF8 value 0xC3 0xA9, then the created file will have the 'e acute' replaced with two unicode characters. The first being unicode value 0xC3 (A tilde) and the second the unicode value 0xa9 (copyright sign). Which I guess could happens if the createFile windows function called was the non-unicode one rather than the unicode one.

Open filezilla client and create a connection to a ftp server for downloading a big file. Then I switch the other window and switch back. The toolbar disappears. When mouse focous on the button's position the buttons appear again. But the other area remain the same. This situation occours sometime.

Download file from remote server, then contents of the file is duplicated.

For example: <html> <head> </head> <body> aaa </body> </html>

to

<html> <head> </head> <body> aaa </body> </html><html> <head> </head> <body> aaa </body> </html>

FileZilla version: 3.15.0 Beta1 Win64

Hi

My Windows 10 PC is set to British, yet the files on my PC are showing MM/DD/YY. Why?

Thanks.

Hello, I am using Ubuntu 16.04. When I open filezilla I saw this alert everytime

The file '/home/username/.config/filezilla/filezilla.xml' could not be loaded. No document element found at offset 7495.

For this session the default settings will be used. Any changes to the settings will not be saved.

So for everytime I have to select editor, please help me resolve this issue . I have tried so many thing to resolve this but unable to solve it.

Upon loss of focus during transfers and regain of focus, the file transfer stats are WILDLY wrong. I only have a 30 megabit LTE link but the transfers are claiming something like 90MB/sec (see attached image).

When logging in to the webserver the tree explorer is not working First level works for ex brusdata.se but clicking on next level public_html is not possible to set focus to. Operating system type on webserver is Linux

Where I'm using a Chinese version windows XP.

Both in the Drop-down box of remote path and the content box below if there has some Chinese characters, for example.

Sorry for my poor English. Hope you can understand what I mean.

My email: hetao@…

Thank you.

• Connect to an ftp or sftp server by using FileZilla 3.30.0
• Enter a remote directory and rename a file in that directory
• End renaming operation by clicking outside of the file-name textbox
• As a result, you won't be able to click on any file from that point forward or click on "..." to switch to another directory.
• Refreshing file listview does not help. The only way to unfreeze file listview is to switch to another directory by using the remote site combobox other than closing the application and opening it back on.

It doesn't occur if you use Enter Key to finish renaming a file.

It doesn't occur if you click on rename but don't make any changes to file's name, and then click outside of the file-name textbox.

If you wish to see it, I've recorded my screen while following the steps mentioned above to reproduce the bug, and put it on YouTube. Here's the unlisted link of the video:

​https://youtu.be/6nGvlrpZDvs

When navigating the main window of the client with tab and shift+tab, navigation seems to get stuck in the log. In other words, when keyboard focus is on the log, nothing happens when I press tab or shift+tab. I review the log often and I use a screen reader, so being able to use this kind of navigation is critical, and many screen reader users don't use a mouse at all. I discovered it is still possible to use the F6 key to move away from the log, which is a good workaround but not one that will be obvious to many. I do not know if this occurs on non-Windows operating systems but I did verify it on two Windows 10 machines. Marking high priority because even if it affects a small number of people, not being able to exit the log is arguably a blocker to being able to successfully use the client, and on the development side it seems like a small regression.

When I start a new connection and it's successful, the file toolbar and the website details (port, domain etc.) toolbar disappear. When I wave my mouse pointer over where they're supposed to be they reappear but only where the tabs are.

Hi,

There is an issue with the icons navigation bar in Mac OS X El Capitan version of FileZilla. Either they disappear or look funny depending what you are doing.

So it becomes impossible to use FileZilla in all it's potencial.

I've attached a print screen.

Best regards,

Hello, it is currently version 3.54.1 of filezilla, 7429 days since initial release. I have read about 50 changelogs and none of them have contained "added confirmation for drag and drop" meaning that I still have to use WinSCP (yuck), please add this as soon as possible (thousands of people have been asking for drag and drop confirmation for decades as they don't like to destroy their server with the accidental flick of a mouse cursor)

My wife was uploading games to our site and the public_html folder just went poof and our tar file went missing a few months ago also

Hi, when executing the program on my Windows XP pro corp operating system running SP3 (P4 system with 2gigs of RAM), Filezilla locked up and then causes my computer to be rebooted. It happens just as the program is opening the window panes, as they expand outward to form the gui before you can use the program. They almost expand completely, but then the system locks up and the mouse stops moving and then the computer reboots after about 30 seconds of being locked up.

Now, this is not all the time, but after rebooting, sometimes it works correctly and does not cause a system crash/reboot. It has done this same action with the two previous versions of Filezilla.

Here is the 'About info' pasted:

FileZilla Client

Version: 3.2.7.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2009-08-23 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.10 GnuTLS: 2.8.3

michael_dba at Hotmail dot com

If I type /tmp/ in Local site, it works fine. if I then type ~ in Local site, it says: '/tmp/~' does not exist or cannot be accessed.

It seems to look for ~ as a subdirectory of the current directory.

This is on Filezilla 3.7.3

I am showing an incorrect time stamp on the remote server. The remote server shows the correct time as does my laptop. A report was processed at 6:30 pm which only takes a few moments to process and the time stamp shows a time of 2:30 pm.

US time change was on 3/8. Ever since then modified dates are an hour off.

Running v3.2.0

If after starting Filezilla, you change the date and time on the workstation, the displayed timestamps of the files on the server are adjusted by the same amount.

To repeat error. Set time on workstation incorrectly by a large amount backwards ie 6 months Connect to server Correct time on workstations Timestamps on server files are now displayed as being 6 months in future.

Restarting Filezilla shows correct timestamps

I know that the local machine time should always be correct, but in this instance it was not when Filezilla was started.

Explorer shows my R:\ "drive" and subdirs without delay, even though some dirs point to offline resources. Selecting such a dir however makes Win XP Pro hang for about half a minute. So I make sure I stay clear of those.

However, When FileZilla's shows R:\ (on startup) it freezes the system right away. The dirs are probably queried in a way that needs them to be opened.

Can querying the local folder be done without opening the subfolders?

I realize that having the offline dirs removed would solve my problem - but I'm not authorized.

I also realize that ticket 3003 (feature req. prio: low) would solve the problem. But asynchronous folder display is very hard indeed. It was the one promise that made me try Vista. No luck, even the MS wizs can't do it, apparently.

Hi, I am using version 3.11.02. With this recent set of updates, the time stamp that is posted when we post the file is wrong.

For example: I have a file that I posted on 06/18/15 at 2:11 pm central time zone and it says it was posted at 9:11 AM

Thanks, Cheryl

Hi.

Since the update to 3.25.0 my SFTP sessions don't come back when they are timed out (Disconnected from server).

I make a request, mostly doing a refresh or a cd, the clients logs "Retrieving directory listing of /foo" in the status window and nothing happens.

I have to close and reconnect a new session.

Idk if it's the same for other session types, I only use one SFTP connection, but that one rather consistently on a daily basis, and the behavior in question showed up only after 3.25.0.

Status: Resolving address of wendischoffstall.com Status: Connecting to 208.109.78.120:21... Status: Connection established, waiting for welcome message... Error: Connection timed out Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of wendischoffstall.com Status: Connecting to 208.109.78.120:21... Status: Connection established, waiting for welcome message... Error: Connection timed out Error: Could not connect to server

I have had this issue for the past 2 days, prior to that everything worked fine. I have updated my Filezilla and still have the same issue.

{tried to post on the forum instead but I couldn't}

I want to change the Timeout setting to '0' but every time I save the setting with '0', next time it opens automatically with '10'. Other than '0' every thing else can be saved. Pls check this minor but annoying bug. Attaching the screenshot for your reference. Look forward to your prompt support.

Hello I am a very glad user of filezilla + filezilla server ! I've found a (little) bug : it is impossible for filezilla client to erase directories in filezilla server if this directiory is too big, if it contains many subdirectories and many files. Example : directory = image of WINDOWS-XP installation CD. Timeout on connexion duration stops this operation before it is complete. Timeout on connexion duration is not reinitialized at each operation (LIST ou DELE). To erase such big directories, it is necessary to proceed in several (many) smaller erase operations. Best regards.

I updated the FileZilla client to 3.41.0 this morning and am experiencing an issue during the directory retrieval process on 1 particular server. I regularly connect to about 12 different FTP servers on a daily basis and this is the only one giving me any issue.

Because of the sensitivity of information, I have obfuscated the host name, IP, username, and password in this public post. Happy to PM it to a tech for analysis if needed.

Status: Resolving address of ftp1.thehostname.com Status: Connecting to #.#.#.#:21... Status: Connection established, waiting for welcome message... Response: 220 TheRDNS.hostname.us Command: AUTH TLS Response: 500 AUTH not understood Command: AUTH SSL Response: 500 AUTH not understood Status: Insecure server, it does not support FTP over TLS. Command: USER * Response: 331 Password required for * Command: PASS Response: 230 User * logged in Status: Server does not support non-ASCII characters. Status: Logged in Status: Retrieving directory listing of "/ZZZ Mr Master/CDN Files delivered"... Command: CWD /ZZZ Mr Master/CDN Files delivered Response: 250 CWD command successful Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode. (#,#,#,#,68,229) Command: MLSD Response: 150 Opening ASCII mode data connection for MLSD Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listing

I have tried removing the remote directory that I am specifying in the site manager to land into, have tried forcing passive and active mode rather than auto-detect, have tried forcing UTF-8 instead of auto-detect, have tried checking bypass proxy, and have tried ALL available server types rather than auto-detect.

So far nothing has worked.

I can confirm that if I connect to this site from the command prompt ftp in windows 10 I am able to successfully connect and retrieve a directory listing.

I have inquired from the host as to what OS, FTP server, and version they are running to try to get more information. I'll update this ticket as I get more info.

I am certainly not alone as another user entered the IRC channel a little while ago with the identical issue, but he left before I was able to ask any questions.

Hi Folks!

Great SW...;-D

Little snag - I tried to connect to a FTP server in germany but it had an (exeptionally) long time to answer requests meaning that FileZilla timed out and retried. A set time out option maybe?

All the best

Ralf, Assoc. Prof, Stockholm Univ.

FileZilla Client

Version: 3.2.6.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2009-07-02 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.10 GnuTLS: 2.8.1

Whe attempting to navigate directories on my server I receive a timeout error

Response: 230 OK. Current restricted directory is / Status: Connected Status: Retrieving directory listing... Command: CWD /public_html Response: 250 OK. Current directory is /public_html Command: CWD alt Response: 250 OK. Current directory is /public_html/alt Command: PWD Error: Connection timed out Error: Failed to retrieve directory listing

I got the message Timer Creation Failed when upgrading from 3.2.5 to 3.2.6. The forum ticket says this was reopened and reclosed because it cannot happen in 3.2.5. However, it did happen. The download was successful though and manually running the update worked fine. Now at 3.2.6.

When i select the new version or take the option when i open filezilla i get a dialogue box with "Timer creation failed" message and so cant load latest version

Newest version hangs retrieving directory listing on several servers, but not all. Strangely, godaddy ftp works.

Normal access with other FTP programs like Cyberduck, so it's definitely FileZilla problem.

Pain in the butt asking for certificate approval every time. What's up with that?

This version is awful. Wish I could go back to previous.

When I start Filezilla Client and use CTRL-R to resume the last connection, the timestamp adjustment specified in the advanced settings for each site is ignored.

This only occurs when resuming the connection from a previous run and not when resuming the connection from the current run. This bug was present in older versions.

Thanks,

Steven

Hello, When transferring files the timestamps regarding the latest version/last updated do not match. The timestamp on the submitting end is correct, but not in the receiving window. It is 2 hrs off.

FileZilla client is set to preserve timestamps on transfered files.

File creation time is preserved on files smaller than 2G.

File creation time is set to current time on files larger than 2G.

Hello,

When setting the option "Preserve timestamps of transferred files", it is incorrectly preserving the modified timestamp by leaving off the seconds information (they are all 00 after transferring).

This causes a problem with our file synchronization software making it think that every file has been modified from the original.

We are using Filezilla client version 3.1.2 and Filezilla server version 0.9.27.

Please let me know if I need to provide a sample log.

Thanks so much for your help!

Sincerely, Jason

What happened to the timezone file created/uploaded time with the recent FZ version change?

I connect to a server on the west coast that is -2 hours from my CST location.

I edit/save a file locally (say 8:00pm or 20:00 hours). The uploaded/updated time is reflecting a time of 1:00pm or 13:00 hours?

WHY?

This used to work with the DEFAULT settings just A-OK under Win 7 SP1.

Now it is NOT working?!?

===from Help >> about===

FileZilla Client

Version: 3.11.0.1

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-05-22 Compiled with: x86_64-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.4.1 SQLite: 3.8.10.1

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

I checked and found a bug entered from 2005. (didn't seem to have any answer) However, I am suffering today.

Client is XP PRO. Connecting to a Linux box (Linux router.dta.ca 2.6.9-55.0.2.EL)

When I connect the times are +4 hours off. So it reads in FileZilla as 13:08 instead of 09:08. I set the time zone offset (TimeZoneOffset="-4" ) accordingly and the times are ok.

The Linux timezone is EDT (Eastern Daylight Time) - correct. Double checked the time and it is fine. When I drop a file onto my Linux box via FileZilla the FILE TIME is correct.

Current FileZilla is 2.2.32.

Very odd. Points to a "how is Filezilla determining the proper time zones?" question.

I dropped a file into another site and sure enough the time was wrong (compared to what my time zone is). The only issue is I have no control of that box so I am unsure what timezone it is in nor it's settings.

thanks belly

I've updated to the latest version but now I can't get onto any of my sites because it just keeps timing out.

Error: Connection timed out Error: Failed to retrieve directory listing

Is this a bug or is there something I need to change. If it's a bug can anyone suggest a free alternative until it gets fixed?

Many thanks!

Using a HiDPI screen (3200x1800), almost everything looks great.

There is only a small issue: the icons in the toolbar are very small.

If you are already connected to a site ("Dev") and quick connect to site ("Prod"), the title bar does not refresh to reflect the new connection.

v2.2.17

Thanks Jason

On my Mac OS X (10.9.5) MacBook Pro (13-inch, Mid 2012), when I unplug my external monitor the FileZilla window adapts to the new smaller built-in display by moving the entire window upward, leaving the title bar and upper panel offscreen. It remembers this new window position to that the title bar and upper panel remain offscreen even when I plug the large monitor back in, and worse, even when I quit and restart FileZilla. I cannot reach the window Zoom button, since the title bar is offscreen, and there is no Window menu from which to choose a Zoom command. On the built-in monitor, I haven't found any way out; the only solution I have found is to reattach the large monitor, go to Mission Control, and drag the FileZilla window to the smaller built-in monitor. After leaving Mission Control, FileZilla still spreads over the top edge of the built-in monitor, but the title bar is now visible on the large monitor and I can once again drag the app window and use the Zoom button. (My monitor arrangement is the 2560x1600 monitor above, with the menu bar, and the 1200x800 built-in display below left-aligned.) I can provide screen shots if needed.

Directory comparison button options (on right click) looks like not shown correctly... probably there should be an menu radio buttons for "Compare filesize" and "Compare modification time" options (or they should be organized as an checkboxed items...)

The another negative of the current button (which control so useful functionality) is that looks like it doesn't keep it's default state.. i.e. it doesn't turns on after it was turned off automatically after for example out of synchronization root.

Thank you for program!

I am running Win <font style='color:black; background-color:Yellow;'>XP</font> <font style='color:black; background-color:Yellow;'>SP2</font> <font style='color:black; background-color:Yellow;'><font style='color:black; background-color:Yellow;'>Filezilla</font></font> <font style='color:black; background-color:Yellow;'>v3</font>.3.1

First of all when clicking the toggle processing of the transfer queue button on the toolbar doesn't stay depressed. Also if I double click on any local file it immediately transfers the file even though the button doesn't indicate that processing is enabled AND there is no check on the Transfer > Process Queue menu item. When there are files being transferred then both button and menu change to show that they are enabled from the disabled state. So what's the point? I would like to halt all processing and set up a transfer queue and once I'm done adding and removing files from the queue, I would like to toggle the processing and let <font style='color:black; background-color:Yellow;'><font style='color:black; background-color:Yellow;'>Filezilla</font></font> do its magic.

I would also like to export/import a queue and I'm assuming that's what the menu items do but unfortunately I can't stop <font style='color:black; background-color:Yellow;'><font style='color:black; background-color:Yellow;'>Filezilla</font></font> from transferring in time to test that.

Also if I manage to quickly hit the toggle button while it's transferring I can stop it, but as soon as I add something else to the queue it start back up on its own without any indication that I want it to.

Thank you for all your hard work. <font style='color:black; background-color:Yellow;'><font style='color:black; background-color:Yellow;'>Filezilla</font></font> is an amazing utility.

I wanted to delete all files in a folder beginning with "H", so I typed "H" to jump to the first file. The file was highlighted, so I didnt't click on it explicitly. Then I scrolled to the end of my desired selection and clicked the last file while pressing the shift-key. All files beginning with "H" were selected ... so I thought, but actually ALL FILES from the top of the (ascending by names sorted) filelist were selected, including all folders, i.e. much more files have been deleted, because this accidently hadn't come to my attention. This bug seems to exist since Version 3.x of the FileZilla-Client, in 2.2.32 selecting multiple files works correctly.

I upgraded to 3.34.0, and now my site manager which lists my sites is super narrow and I cannot change its width.

Just downloaded FileZilla Client to my new computer and I'm seeing an issue I've never had before. In the "View" tab I have Tool bar and Quickconnect bar checked but they are not showing on my screen, so I have no way to connect to any servers. My computer and FileZilla are both totally up to date and I've played around with other settings. I've also looked through the forums and can't seem to find anything related to this. Any help is greatly appreciated!

When a saved website is opened with Site Manager, the toolbar buttons disappear. Some of the buttons reappear after mousing over them. This is a problem with 3.3.1 and 3.3.2-rc1.

Toolbar disappears after site connection.. I toggle "Toolbar" and it reappears..

FileZilla Client

Version: 3.5.3 Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2012-01-08 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 2.10.4

Operating system:

Name: Windows NT 6.1 (build 7601, Service Pack 1) Version: 6.1 Platform: 64 bit system

• -

How to reproduce:

1. Hide toolbar through menu View → Toolbar
2. Restart the program

Expected behaviour: Toolbar does not displayed.

Current behaviour: Toolbar is displayed.

Version: 3.24.1

Build information:

Compiled for: x86_64-apple-darwin16.4.0 Compiled on: x86_64-apple-darwin16.4.0 Build date: 2017-02-21 Compiled with: Apple LLVM version 8.0.0 (clang-800.0.38) Compiler flags: -Werror=partial-availability -Wall -g -std=gnu++14

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.4.16 SQLite: 3.16.2

Operating system:

Name: Mac OS X (Darwin 16.4.0 x86_64) Version: 10.12 CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi2 bmi2 Settings dir: /Users/maxim/.config/filezilla/

I use the Zune-Desktop Theme from Microsoft on Windows XP, but the Toolbar of FZ3 stays on a different color (see Attachment). Maybe the color of the Toolbar is not linked to the correct windows-elment-color.

Data: FZ3 RC2 Windows XP SP2 (Zune Theme : ​http://go.microsoft.com/fwlink/?LinkID=75078)

I just need to connect and the toolbar get into this (screenshot annexed - the red lines are mine). When I mouse hover the icons appears again, but the space between them not.

Windows 7 Professional x64 pt-BR FileZilla 3.3.4.1 Desktop resolution: 1600x900 (Aero enabled) VGA: Intel GMA X3100 (driver 8.14.10.1930)

When connecting to any of the sites in my connection list the toolbar icons disappear. I have been checking to see if this problem has been fixed in the new releases but have not seen anything, not knowing if you know about it I thought I would let you know. I have attached a screenshot to show you how i see it. Thank you very much I use this software every day keep up the good work.

How to reproduce:

1. Go to Settings → Interface → Themes
2. Choice Default theme
3. Set scale factor to 0.50
4. Press OK

Expected behaviour: Icon size on toolbar is decreased.

Current behaviour: Icon size not changed.

Version: 3.24.1

Build information:

Compiled for: x86_64-apple-darwin16.4.0 Compiled on: x86_64-apple-darwin16.4.0 Build date: 2017-02-21 Compiled with: Apple LLVM version 8.0.0 (clang-800.0.38) Compiler flags: -Werror=partial-availability -Wall -g -std=gnu++14

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.4.16 SQLite: 3.16.2

Operating system:

Name: Mac OS X (Darwin 16.4.0 x86_64) Version: 10.12 CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi2 bmi2 Settings dir: /Users/maxim/.config/filezilla/

The toolbar does not display when connecting to FTP. Only when moving the mouse over the toolbar area do the icons partly appear and that's a crap shoot as well.

Yes, I'm fully aware that you've rejected this problem umpteen different times now from umpteen different users, claiming that the fault is with Intel's graphics card - I AGREE AND WISH IT WERE OTHERWISE. Obviously, Intel isn't going to "fix" something on their end just to accommodate your program anymore than MS would "fix" their OS for your program either. How about doing all of us who are having this problem and would like to continue using FileZilla a favor and swallow your pride, take the highroad, actually demonstrate that you know more about programing than the idiots at Intel and at least look into a fix on your end? Pretty please!

I've been using FileZilla for many many years and would really like to continue using it, but that's impossible to do if I can't read what's not there - the menu bars. Please give us loyal users a break just this once. I don't want to look for another FTP client. Yours is the best and the I promise the next time I buy a laptop, I won't buy one with crappy Intel graphics.

Thanks!

FileZilla Client

Version: 3.3.5.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2010-11-21 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.11 GnuTLS: 2.10.2

Operating system:

Name: Windows NT 6.1 (build 7600) Version: 6.1 Platform: 32 bit system

Windows 7 Professional Desktop resolution: 1280x800 (Aero enabled) Intel HD Graphics (Core i7) (driver 8.15.10.2154)

I am using Filezilla 2.2.18 under Windows XP Professional English version.

When I tried to access a remote site (which supports UTF-8) containing folders in traditional Chinese, I cannot read the correct text (all become question mark).

If I start Filezilla using Microsoft Applocale and choose "Simplifed Chinese", I can view the correct text (in traditional Chinese).

I believe that it is only a minor bug about codepage conversion which could be fixed in the comming release.

Thanks a lot for the contribution of making such a mature FTP client.

I downloaded a remote folder with a trailing space in it´s name via context-menu. Downloading was fine, but I wasn´t able to delete that folder with Windows Explorer ("Datei kann nicht gelöscht werden: Die Quelldatei oder vom Quelldatenträger kann nicht gelesen werden.").

Deleting it is only possible by deleting the parent folder via command line with "rmdir /s test".

FZ: 3.3.3

Using FileZilla 3.3.0.1 connecting to the popular FTP server vsftpd, we cannot access directories with trailing spaces.

Reading the changelog of 3.2.8rc1 suggested this has been fixed, but it is not.

Digging in deeper in all the tickets revealed that the server needs MLDS support, which vsftpd does not, so this has not been fixed for this case.

To reproduce...

1. Enable speed limits
2. Exit Client
3. Restart Client

The menu item is not checked but speed limits are seemingly enabled. Selecting the menu item will not set check on. Selecting the menu item again will set check on.

filezilla 3.3.2 wxWidgets 2.8.11 gnuTLS 2.8.3

Issue: headers do not sort

Expected results: click on headers of transfer queue and the list should sort on that column

Actual results: click on the headers shows a mouse down, but list does not sort.

version 2.2.20

The "Transfer Queue" pane collapses whenever you minimize the program. You have to resize it to see it again.

When Remember size and position of FileZilla is enabled under Edit, Settings, Interface Settings, Miscellaneous settings, and Transfer Queue is enabled under Startup settings, the Transfer Queue window does not remember where it was last set. In fact, regardless of where it was last, the transfer Queue window covers two thirds of the screen covering the local and remote directory listing, which are completely covered if local and remote Treeview is enabled. I have duplicated this problem on 3 different computers.

I get this error when I try to open my www folder on the server. Here are the details: Command: PWD Response: 257 "/www" is current directory. Command: CDUP Response: 250 CWD command successful. Command: PWD Response: 257 "/" is current directory. Status: Directory listing successful Status: Retrieving directory listing... Command: CWD /www Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (207,159,146,172,184,71). Command: LIST Response: 125 Data connection already open; Transfer starting. Error: Transfer connection interrupted: ECONNABORTED - Connection aborted Response: 550 .: An established connection was aborted by the software in your host machine. Error: Failed to retrieve directory listing

Trying to transfer this filename from a KISS DP 558:

P06 Kanal 5 - Tor 05-06-2008 18:55:00.vob

Creates a file in the target directory on my PC called:

55 (no file extension)

Oddly the file explorer inside FileZilla lists the file name as 55:00.vob (see attached screenshot) but windows explorer shows the filename as mentioned above. Either way it pretty wrong though :-)

I guess it must be related to having : in the file name somehow

Hi, i installed FileZilla Client 3.9.0.2 from the filezilla Screen today After Installation all of my Uploads failed with error message after reaching 100%. Filezilla shows an smaller target file size, perhaps 4096 but 1.566.348

Then i used another pc with an older Version of filezilla. After Connection I found the uploaded file with the full size on the target device. The file was OK.

As per summary, tasted on Gentoo Linux amd64 with filezilla client 3.1.3.1 and 3.2.0

My downloads do not start in the latest versions of FileZilla when I select files in folders which contain special characters in their path name (i.e. ä - a with dots on top etc.).

This worked in previous releases.

A file is transferred from a TSO system to a Mac and back again. The file has format LRECL=80 RECFM=PS BLKSIZE=3120. The target dataset for the transfer back to TSO is preallocated with the correct attributes.

The contents of the returned file are not in the correct order.

This has started happening since the Mac was upgraded to BigSur.

When transferred using SFTP to the USS file system the order is correct.

When you scroll with the mouse in the "Queued Files" transfer window, the graphic bar (green percentage thing) doesn't scroll properly, and it sort of screws things up.

I'm on filezilla 3.1.2 (using the ubuntu package from the repository).

Files transfer from my computer to the server but do not appear on the online website. Updated to current version of Filezilla. This worked a month ago.

Windows, version 3.7.4.1. Imagine I attempt to transfer/upload 20 files to my FTP site (not FileZila server). My FTP server supports 10 connections. I set the transfer to support 10 connections. Sometimes, the server fails with code 530 (see log below).

Bug is, when that happens, it doesn't attempt to re-try file upload.

I have attached a log file. In is it the initial attempt to upload the files. Then, there are 2x more attempts to upload the files that didn't initially transfer.

I understand that the retry logic is tricky. However, the minimum it should do is -- at the end of the transfer, it could show a dialog saying something like "7 of 20 files failed to transfer".

Keep up the good work!

Sean

During a backup transfer (server to client) of about 3181 files always the same jpg files wont be transferred, most likely because they include German umlauts and special characters like ü and ß.

But downloading each of these files directly without using the queue succeeds. So something is not working when using the queue.

Attached a screenshot showing some of the files.

FileZilla Version: 3.3.4

Hi there When I transfer files If i put the window in the background the transfer pauses until i switch back to the filezilla window. If i switch away long enough the transfer fails and moves to the Failed transfers tab.

I have set transfer priorities for files in query, but they weren't applied and the files were uploaded as in order of places on the list