Custom Query (4044 matches)

The red/green activity indicator lights in the lower right corner of v3.2.2.1 don't activate when receiving or sending data. I've tested this w/ a regular FTP server and FTP over SSH. The lights remain dim regardless of whether I'm uploading or downloading data.

FileZilla client failed to retrieve directory listing form AS/400 FTP server under i5/OS listing format.

Below is the connection log from FileZilla: Status: Connection established, waiting for welcome message... Response: 220-QTCP at HKWEBSVR. Response: 220 Connection will close if idle more than 5 minutes. Command: USER QSECOFR Response: 331 Enter password. Command: PASS * Response: 230 QSECOFR logged on. Command: SYST Response: 215 OS/400 is the remote operating system. The TCP/IP version is "V6R1M0". Command: FEAT Response: 211-Feature listing follows: Response: AUTH TLS Response: CCC Response: PBSZ Response: PROT Response: 211 End of feature listing. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "QGPL" is current library. Command: PWD Response: 257 "QGPL" is current library. Error: Failed to retrieve directory listing

the dropdown box beside the quick connect button is displaying 2 of the same user.

list looks like user1@… user1@… other_user@… user3@…

it started when i changed the password for "user1@…" i retyped the user info in the text boxes and pushed connect and now the list shows both versions of the user.

the one connects with the new password and the other connects with the old password.

you should check if the user is already in that list and just update it.

This is actually an old bug but for some reason ignored: the remove directory pane cannot display chinese correctly like version 2.2.30 did. See attached picture.

CPU: Intel Core2 Quad FileZilla Version: 3.2.2.1

Steps to reproduce:

• Connect to a server
• Right click a server file
• Select rename
• Click a folder in the divided-area above the file viewer

What happens: The text-area from the file rename is keep open when the folder is switched and remains active. What is expected: FileZilla should cancel the rename and hide the text-area when switching folders.

We've been running WinSSHD from BitVise for a couple of years here. No problem with FileZilla at all until the latest release (3.2.2.1). Suddenly we're unable to connect to our BitVise WinSSHD server and perform FTP functions.

FileZilla error messages are: Status: Connecting to secure.asiflex.com... Response: fzSftp started Command: open "CISNOPLN@…" 22 Command: Pass: Error: Authentication failed. Error: Critical error Error: Could not connect to server

Previous version of FileZilla still successfully connects to the BitVise WinSSHD server, so I'm inclined to believe something got "broken" in this latest release.

I drag a directory from my local site to the remote site and instead of it being a sub-directory it became one of my main directories. I reperformed the drag from local to remote successfully but am unable to delete the original remote directory and one of its subdirectories.

Hello,

I am running Windows 7 beta 1 (build 7000) x64 Ultimate, and I know this is beta software, however I think this may be something to look into when W7 goes final.

I installed the shell add-on, and now if I drag a file from the remote location, it makes a folder named fz3-12352698462440 (sometimes different numbers will appear)

Anyone have any ideas? I would be more than happy to test them out. Thanks again for the great software! -noop

I saw other users had this same problem on the PC....

I just downloaded 3.2.2 and now I get the error message: The file home.html cannot be opened. The associated program ('Applications/TextEdit.app' <"home.html") could not be found. Please check your file type associations.

I've never had a problem with earlier versions. Can I delete this last update and download an earlier version? I have a deadline of TODAY to complete my website and this is the only way I have of editing...I don't want to have to switch to another editor, I've been using Filezilla for years and this is the first time I've had a problem. By the way, I get the same message no matter what type of extension is on it. Yet the program is there, I have my files associated properly, and if I download have no problem opening them up.

Steps to reproduce :

1/ connect to a remote ftpd 2/ select a remote directory 3/ using contextual menu, ask for download in a local empty directory (or drag & drop the directory from the remote windows to the local one)

Result : it seems that some -- not all -- sub directories can't be created in the local folder.

In the example : I have selected 2 direcories : languages and pdf : pdf is ok but not language.

I join a log file.

PS : this bug doesn't occur with 3.2.1.

Thank you

I saw some older tickets about this issue, but never with a (working) solution.

When I checked my local hdd after downloading a big folder with images, I noticed that directories are all over the place. I can't figure out if the messing up is consequent.

I'm using active mode, but the wizard tells me everythings fine. I'm also using a filefilter to exclude thumbnails. When I add the dir to the queue, everything seems fine, trouble start when processing the queue (wrong folders are immediately created, while NOT listed in the queue before).

I have 3 disk attached to my computer. In the old release I can press \.. until showme all disk of my computer. In this version I just go until the disk root of my local folder. Ex. I have a C, D and L Disk. My start local folder is in the C. So in this version when press \.. a just can go to C:\ in the last version when I pressed \.. I go to see C:\ D:\ or L:\ disk.

and use server reported ip

Since upgrading FileZilla (current version is 3.2.1), I am unable to connect to a server. I have two server connections established, and I've ensured that the settings are accurate. They are the same for each server. I have no issue connecting to the first server, but connection fails on the second server. It is not able to validate my security certificate. I do not get beyond AUTH TLS or AUTH SSL (error: 431 could not initialize SSL connection; could not connect to server). This was not an issue prior to upgrading to v3.2.1.

Also, my connection to the first server seems to only last for a short time, and then I am automatically disconnected from the server (error message: Disconnected from server: ECONNABORTED - Connection aborted). This, too, did not happen before the upgrade.

Exporting the Filezilla.xml from the PC and importing it into Filezilla for Apple Mac crashes.

When a project is listed in the server manager, and has a local directory in PC format inserted (so let's say c:\projects\www.kfz.net ) and your are moving your data to the mac filezilla is crashing because he can not find the c: drive.

Maybe it make sense to check for PC drives and remove the entries and set them to empty when a user is importing the filezilla.xml on a mac.

Axel From ​http://www.kfz.net

I tried to download a file... This is what I got Error: Failed to open "D:\m\mpsf\submitted\source999804966457_Wed Nov 12 01:38:38 2008.sql" for writing Status: Starting download of /www/tpsf/cgi-bin/source999804966457_Wed Nov 12 01:38:38 2008.sql Error: Failed to open "D:\m\mpsf\submitted\source999804966457_Wed Nov 12 01:38:38 2008.sql" for writing Status: Starting download of /www/tpsf/cgi-bin/source999804966457_Wed Nov 12 01:38:38 2008.sql Error: Failed to open "D:\m\mpsf\submitted\source999804966457_Wed Nov 12 01:38:38 2008.sql" for writing

There is enough space on the disk.

Hello,

I'm using a recent 3.2.1 filezilla and the listing of some files (name and size) is false. This bug is more than just visual, files wrongly displayed can not be downloaded. Comparing with an older version (2.2) it seems to me that the problems concerns files having their names beginning with a number, or begining with a number and having a blankspace, etc...

See screenshots, where original filename

02Conversion PDF Output-StartPage_000000001.pdf weight 541078b modification date 11/02 at 2 o clock is displayed:

PDF Output-StartPage_000000001.pdf, weighting 11 o, mod date 02/02 So seems to be a lag: files seem to have their size displayed as their modification date, their modification date as their modification time and so on

Odd enough, some dates are not concerned: 07 and 10 for example...

See attached files Thanks in advance for any help

Distant OS is AIX 5.3

I get the error message: Call-list.2009xls cannot be opened. The associated program(WX_DDE#"C:\Program Files\Microsoft Office\Office12\EXCEL.EXE"\e#Excel#systen#[open("Call_List_2009.xls")]) could not be found. Please check your file type associations.

Yikes! How do I get back to the last version? Can I delete this last update and go back to another version? Thank you for your help! Angie

After installing 3.2.1 I get only one dialog window with OK button telling me to report all bug I encounter. After clicking OK the dialog disappears but nothing else happens. The process keeps running but I get no top level window.

After transferring file from computer to server the file size is 0.

Hi everyone, after Apple released the Security Update 2009-001 FileZilla Client crashes and could not start up! Please help! Thanks in advance Simone

Create a folder named "パーソナル" (without the quotes) on a server using the SJIS character encoding (japanese). (Mostly Microsoft Windows Japanese-hosted)

In the remote directory tab, it will display correctly. However, in the remote tree list and in the log, it displays as "ƒp[ƒ/ƒiƒ‹" (without the quotes). It is possible to enter into that directory, but any operation done within it produce a bug - creating something in it creates it in the parent directory, it's impossible to download files that were put in there by another user, etc.

After uploading a file and renaming it so that the file name ends with an asterisk (*), the file has become unaccessible

E.g. I upload a file "test.zip" Then I rename it to "test.zip *old version*"

FileZilla shows "test.zip *old version" (the last * is missing) I'm unable to do anything with that file anymore. Not even a delete.

Sometimes at the right side of FileZilla windows (FTP Server W2000 Server) I cannot see folders in the lower area that are shown in the upper area (3.2.2 rc1), see attached screenshot

I recently upgraded to the latest version of FileZilla. I think it worked after upgrading but a day or two later, I cannot open it anymore. It comes up saying "The application Filezilla quit unexpectedly"...

I've tried uninstalling and reinstalling it and the same issue occurs. The only time I got it to work was when I restarted my computer.

The only other thing is I also upgraded the software on my Mac recently... Could that have done anything?

I am running Filezilla Client 3.1.4.1 on Mac OS-X Attempting to upload .zip file (28mb) to directory on my website host upload completes to between 80 and 95% complete, stops and I get

Error: Disconnected from server: ECONNABORTED - Connection aborted

filezilla then restarts the upload (at about 40%). I can see the file in my host directory but it's not the complete file (approx 12mb). It continues to do this.

Transfer mode is set at passive I have tried it with and without "Send FTP Keep Alive Commands" - makes no difference. default action is set to resume

I have used this on and off for the last couple of years with a similar issue but setting the "Keep alive' command has normally sorted this out but this is the largest file I've attempted to upload.

Please find below copy of sample script:

Status: Resolving address of ftp.s.com Status: Connecting to 208.187.218.94:990... Status: Connection established, initializing TLS... Status: Verifying certificate... Status: TLS/SSL connection established, waiting for welcome message... Response: 220 FTP Server Ready Command: USER * Response: 331 User name accepted, password required. Command: PASS Response: 230-Welcome * Response: 230 Command: PBSZ 0 Response: 200 Protection Buffer Size set: 0. Command: PROT P Response: 200 Protection Levet set: P. Status: Connected Status: Starting upload of /ANDI'S DB/Websites/The Scrapbooker/ACTUAL PRODUCTS/PAPER KITS/MK0109 Banyan Tree/MK0109 Banyan Tree.zip Command: CWD /download Response: 250 CWD command successful. Status: Retrieving directory listing... Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering passive mode (208,187,218,94,226,128). Command: LIST Response: 150 Opening ASCII mode data connection. Response: 226 Transfer complete. Command: PASV Response: 227 Entering passive mode (208,187,218,94,226,131). Command: APPE MK0109 Banyan Tree.zip Response: 150 Opening BINARY mode data connection for MK0109 Banyan Tree.zip. Error: Disconnected from server: ECONNABORTED - Connection aborted

Any assistance would be gratefully received.

i cant go up past the c: to my computer. so i can see all my drives.

When there is a folder with realy a lot of files, then the server sends a timeout during getting the filelist. As result you are not able to delete the folder!

I recently updated my intel Macbook pro. Filezilla now refuses to open and keeps getting an error. Can you please fix this because I love this FTP client and I need to use it for school but I can't if it won't run on my computer.

In 3.2.0 when I opened a PHP file associated with PHP Editor both the editor and the file opened without a problem.

When I try to do the same after upgrading to 3.2.1 i get the following error.

Cannot edit file

The file 'phpfile.php' cannot be opened: The associated program (WX_DDE#"C:\Program Files\PHP Editor\PHPEditor.exe" "phpfile.php"#PHPEditor#Macros#[Open("phpfile.php")]) could not be found. Please check your filetype associations.

OK

To fix this problem I went into the file associations and clicked OK. I tried again and the problem seems to be fixed.

i got my website down cause i made a doubleclick in local file and it transferred blindly to remote server and replaced it

i guess you're not taking uppercase or lowercase in consideration like Web.Config is not the same as web.config but.. IT IS!!!

so you're not detecting replace in this situation

got version 3.2.1

keep up the good work.

When attempting to download the client from this site ../download?filename=FileZilla_3.2.1_win32-setup.exe

I receive a 502 Bad Gateway error.

Hi Filezilla team, thanks for development filezilla client!

But I have detected a bug in the current version 3.2.1 of filezilla client (just downloaded update before using today). Below the step-by-step description:

1) Connect to the remote server (with blank directories). 2) Select on local site a directory with subdirectories. Local directory tree is shown. 3) Select some files in the window below of the local directory tree and choose "upload" from the context menue (right mouse click). 4) Download ok. 5) Select some directories in the window below of the local directory tree and choose "upload" from the context menue. These directories contains a lot of small files (704 files in 14 directories). 6) Uploads begins to work... 7) Some files later the message window appears "Target file already exists", asking me for an action. But there is no duplicate file. The remote ftp server was empty. I didn't touch the local subdirectories while uploading.

After confirming the window the upload repeats working. In summary all files are uploaded. (I hope the contents of the files are correct, I didn't checked all files yet).

Hope you can find the bug. If you have further questions don't hesitate to contact me.

Best regards Glg

(Sorry for my bad german-english)

Hi, as summary says it crashes during startup *if* it doesn't find last local directory anymore (i.e. if I change its name or I remove it *after* last FZ client termination.

Hi,

I have already seen some people reporting this error and you saying they need to upgrade their FTP server, but this is with a different FTP server (ProFTPD).

In FileZilla 3.2.1, when I am trying to connect through SFTP (FTP over explicit TLS/SSL) to a server, the connection succeeds but the directory listing fails.

A few days back directory listing worked with FileZilla 3.0.8.1.

Attached you have the connection log.

George

The steps I take are: 1) Connect 2) Select file from web server and drag it into local directory. 3) right click file in local directory and click "edit" 4) edit the file and save 5) As soon as I put focus on FileZilla, a pop-up says that a file has changed, do I want to upload it? 6) I click "No" BUG: as soon as I click "No", the program connects and executes a skip file transfer command. Sometimes the file actually uploads to a random directory.

This happens primarily with Windows XP home edition.

Attempts to do "View/Edit" on a remote file that happens to be a Microsoft Office file (e.g., Word .doc, Excel .xls) fail with the new version of Filezilla (3.2.1). They worked just fine in 3.2.0. The error message you see is:

The file "" cannot be opened: The associated program (WX_DDE #c:\Program Files\Microsoft Office\OFFICE11\Excel.exe" /e#Excel#system#[open("")]) could not be found.

Since I use this program to remotely edit Office files on outside computers, this is a blocker for me, but I have set the priority to "high".

I did not want to up date as I am in the middle of a huge project but after I said no to update the program locked up.

Ok so I did the u/d bam it doesn't work at all now freezes right up.

when I try to shut down the computer the send error and end program go into a tango together......

I'm not furious just very disappointed

please help NOW

Filezilla crashes on startup, crashreport attached.

concerned setting in filezilla.xml:

<Setting name="Last local directory" type="string">/Users/WakA/Downloads/series/</Setting>

If the directory specified no longer exists (is renamed/moved etc.) filezilla crashes.

Filezilla 3.2.1

As the attachment shows, ls command succeeded with 7 matches, which means there should be 7 file/dir entries. But in the server file list window, there are only 4 listed. See attachment 2.

Hello,

I use filezilla 3.2.1 Compiled for : i586-pc-mingw32msvc Compiled on : x86_64-unknown-linuxè-ngu Date : 1009-02-06

When i try to transfer some file greater than 5 440 Octets, the transfert try a first time, try a second (and ask for replace), stop with this message : delay expired.

There is no problème with root account of my server and FileZilla. There is no problème with monchy account and IE (or other ftp software) There is no problème with monchy account and Filezilla. I have no firewall on my computer. Server : Unix, Client : Windows XP Pro SR2

If you want, i can send you user/password account to test.

Thank you for this good product.

Log : Commande: USER monchy Réponse: 331 Password required for monchy Commande: PASS Réponse: 230 User monchy logged in Statut: Connecté Statut: Démarrage de l'envoi de C:\Documents and Settings\Iatrino\Bureau\Procédure_PriseEnMain_Distance.doc Commande: CWD /httpdocs Réponse: 250 CWD command successful Statut: Récupération du contenu du dossier... Commande: TYPE I Réponse: 200 Type set to I Commande: PASV Réponse: 227 Entering Passive Mode (195,14,0,130,234,112). Commande: LIST Réponse: 150 Opening ASCII mode data connection for file list Réponse: 226-Transfer complete Réponse: 226 Quotas off Commande: TYPE A Réponse: 200 Type set to A Commande: PASV Réponse: 227 Entering Passive Mode (195,14,0,130,231,65). Commande: STOR Procédure_PriseEnMain_Distance.doc Réponse: 150 Opening ASCII mode data connection for Procédure_PriseEnMain_Distance.doc Erreur: Délai d'attente expiré

Newer files are showing up with a last modified date of 2003 and 2004. Files ftpd sometime after 12/18/2008 and before 1/9/2009 are doing this. Although anything in 2009 is having this problem with the old date in the last modified date. Using FileZilla 3.2.1, also happened in last release. FTP Server is FTPshell 4.3 using sftp. I get the correct listing if I use Linux to do an ls -al on the directory.

Client FX Problem: Uploading a file exceding +- 65K

Windows XP 2002 Service Pack 2 Disabled Firewall in Windows In FX Edit Settings "Fall back to Passive"

Client file size 140K, uploaded to server - file size on the server (90% of the time) 65K.

An error occurs part way in the process which may point to the problem.

Command: PASV Response: 227 Entering Passive Mode (69,49,101,51,253,230) Command: STOR clinics_2009.jpg Response: 150 Opening BINARY mode data connection for clinics_2009.jpg

Error: Connection timed out

Status: Resolving address of bentcreek.ca Status: Connecting to 69.49.101.51:21... Status: Connection established, waiting for welcome message... Response: 220 Website FTP Server Ready Command: USER bentcreek.ca

Gerry

Upon installation of update 3.2.1 the file associations with MS word and MS excel documents was lost. Pdf's are ok. When I try and open the doc's from the transfer window using the right click function (open) FileZilla gives an error saying the file could not be opened due to the associated program not being found. It goes on to say 'Please check your filetype associations'. The files are certainly there and can be opened normally from and explorer window. This only happened with the recent update.

I have used FileZilla a lot here at the office and it has always worked fine until yesterday. I am the only one at my PC and I have double checked numerous times and all login info is correct, yet I keep getting the following error.

Status: Connection established, waiting for welcome message... Response: 220 WFTPD 3.2 service (by Texas Imperial Software) ready for new user Command: USER jason@… Response: 331 Give me your password, please Command: PASS Response: 530 Not logged in - password incorrect Error: Could not connect to server

I'm assuming this means MY password is incorrect? I am positive the password I entered is right and need some help. Thanks.

Jason

I created an account by ​http://www.awardspace.com and filezilla is not able to create any directory called "form". Please see the workaround below:

Tue, Feb 10 2009 4:38am Hi,

My ftp client cannot create any directory called "form". This problem happens only by this free hosting provider.

To solve this problem, I have to create this directory 7 times in different places using the "File Manager". It is a knightmare.

Is this a bug or there is a better solution?

Thanks !

Joao

Tue, Feb 10 2009 7:41am - Kathy Gardens Hello Joca,

What FTP Clinet are you using? Do you receive any error message when trying to create this form directory? Please provide us with more ifnromation, thank you.

Best Regards, Kathy Gardens, Awardspace Dedicated Support Team

Tue, Feb 10 2009 2:16pm This error is happening since 2008.

I am using Filezilla (latest version)

Comando: MKD form Resposta: 550 form: Forbidden filename Comando: MKD /nossafamilia.org/components/com_fabrik/views/form Resposta: 550 /nossafamilia.org/components/com_fabrik/views/form: Forbidden filename

Best regards, Joao

Tue, Feb 10 2009 4:11pm - Kriss Hanks Hello Joca,

This does not seem to be a bug. At least it is not a bug in our system. If it was, the File Manager wouldn't have let you create this folder. I tried to create the same folder called "form" using FileZilla and I got the same error. Maybe FileZilla support might know the answer. We will have to consult with them. If we can help you further with something, please let us know.

Best Regards, Kriss Hanks

AWARDSPACE Dedicated Support Team support@…

"Your winning web hosting provider" ​http://www.awardspace.com

Run the following from the command line:

filezilla.exe ​ftp://ftp.kernel.org

I expexct filezilla to connect to ftp.kernel.org instead it just hangs as you can see in the picture attachment.

I have this bug in all Filezilla versions tested, also the last one 3.2. I always have this problem when i connect to ftp.peoplesoft.com delivery system and download any file.

For test you can connect to ftp.peoplesoft.com/outgoing/GSC/CRM as a anonymous user and download NIMS_8_0_SP3GA.zip or any other file, after download finish, the file download restart again automatically and write over the same destination file in a infinite loop, this error produce a destination file with a great size.

In fact the download process never ends, it start and start again...

When you upload a file, and you press F5 on the server side (right) to update the list, it freezes the window and it says (Not responding) in the title bar, for about 30 secs, then it refresh the list and it works just fine, is just a 30 sec freeze.

hi,

i want to change the permission of my files. but when i change it into chmod777 , the status describes that " 500 'SITE CHMOD 777 filename.php': command not understood "

due to this problem, i cannot upload any kind of forms and other files like poll system.

your help would be most appreciated.

I downloaded the update for filezilla on 2/9 (3.2.1 for win32.exe) I am running VISTA os. I can no longer view, edit or download .xls spreadsheets. I could be fore the upgrade. I tried to uninstall and reinstall and that did not help. The spreadsheets are not corrupt, I have validated that by using a different computer to download. Any suggestions?

Using the latest release (3.2.1) on Mac OS X Leopard 10.5.6 (Mac Pro, Intel Quad Core Xeon, 4GB RAM):

If an external drive was last used as the 'Local Site', and has since been ejected, and FileZilla closed, re-opening the application will immediately crash, and no access to the application will be gained until the same external drive is reconnected.

Normally, the application should revert to a default folder on the OS hard drive, but in the latest version, this does not seem to be the case.

After installing 3.2.1 I couldn´t edit my index.html file And no other files as well . After uninstalling and installing 3.2.0 everything works great again . See message enclosed Regards - great program !!! Benke

I just recently downloaded the most recent update. I downloaded the files and folders from my site; I couldn't see my folders on my local directory. I tried to download them again, but got the overwrite option window. I refreshed my directory and then saw my folders. This has never happened before.

program works after the two attached error messages appear

When I load the program, I immediately get the following errors:

Could not load C:\Users\Brendan\appdata\Roaming\FileZilla\filezilla.xml. Make sure the file is valid. For this session, default settings will be used and any changes to the settings are not persistent

I hit OK

Welcome to FileZilla 3.2.1. Please report any bugs you may encounter

I hit OK

I get another error: Could not load C:\Users\Brendan\appdata\Roaming\FileZilla\queue.xml. Please make sure the file is valid and can be accessed.

Note: I have verified that the files are valid and accessible. I have attached a screenshot here.

I hit OK. The program launches. I can access the files in my ftp directory, but when I try to view a CSV file, it can't find Excel to open the file anymore (screenshot attached). This was one of my favorite features of Filezilla.

Thanks for your attention to this. I was using Winzip before and I like Filezilla much better. Would hate to have to stop using it.

Earlier I used Foxit Reader to open PDF files but then I removed it and installed Adobe Reader. However, now whenever I try to open PDF files from FileZilla browser, it still seeks for Foxit Reader to handle them and does not associate them with Adobe Reader which is now a default program. Do you think it's a problem with my system settings or FileZilla?

I find that Filezilla 3.2.1 will not transfer files that have two periods '..' in the middle of a file name. (The double periods are a typo on my part - not intended]. The output below is the result of a Windows XP 'fc' comparison between the original directory on cb and the destination directy on jh. Note that the file test..file.txt did not transfer. I would expect a file with any legitimate Windows XP filename to transfer correctly.

* cb.txt \jvh\tmp\test..file.txt \jvh\tterm\delpassw.tt_ * JH.TXT \jvh\tterm\delpassw.tt_ *

Both machines are running Windows XP.

On FileZilla Client, open "Site Manager". On right side we have 4 tabs. The bugs/improvements below are related to the site manager dialog.

General Tab: Servertype --> should be "Server Type" Logontype --> should be "Logon Type" or "Login Type"

Anonymons is by default selected for Logontype, which is fine, but when I select Normal from the dropdown, the User and Password boxes still show 'anonymous' and ''. Upon selecting 'Normal', these two boxes should clear up. Everytime I create/add a new site, I have to delete these two boxes. They should automatically clear up.

When Servertype FTP is selected, the Port box could show 21 by default. Similarly when SFTP is selected, the port box can change to 22 automatically. I remember FileZilla 2 had this before.

Advanced Tab Servertype --> should be "Server Type"

For default remote directory, if I enter "/public_html" it works, but if I just enter "public_html" it does not work and shows a message saying the path could not be mapped. FileZilla 2 handled this automatically. Can we have it back?

The tab "Transfer settings" should be "Transfer Settings", i.e. in title case.

"Force showing hidden files" option should be also available in the site manager. There can be a checkbox for it just below the "Default Remote Directory" text box.

This is all I have for now. Thanks.

when i upload large of mybb forum files and it creshes.

i did use the latest filezilla 3.2.1 and it still crashes.

Running the Network Configuration Wizard to try to resolve a problem connecting to an FTP server. SFTP connects without issue. The following are the test results from a configuration test which advise submitting a Bug Report. I tried running the wizard without any initial settings set to see if that would work first.

*IP ADDRESS REMOVED FOR PRIVACY* Connecting to probe.filezilla-project.org Response: 220 FZ router and firewall tester ready USER FileZilla Response: 331 Give any password. PASS 3.2.0 Response: 230 logged on. Checking for correct external IP address Retrieving external IP address from ​http://ip.filezilla-project.org/ip.php Checking for correct external IP address IP 79.XX.XXX.XX hj-be-bfh-gj Response: 200 OK PREP 51936 Response: 200 Using port 51936, data token 348041089 PORT 79,XX,XXX,XX,202,224 Response: 200 PORT command successful LIST Response: 150 opening data connection Response: 503 Failure of data connection. Server sent invalid reply. Connection closed

When clicking next in the wizard the Summary of test Results is as follows: The server sent an unrecognized reply. Please make sure you are running the latest version of File Zilla. Visit ​http://filezilla-project.org for details. *(I am running version 3.2.0 bld date 2009-01-07) Submit a bug report if this problem persists with the latest version of File Zilla. *(problem occurs each time Wizard is run)

When attempting to open a folder on a remote sftp system, if the folder has a large number of files within, an error is generated and you do not get to review or navigate to that folder.

Below is the command list that is displayed.

Response: Current directory is: "/" Command: ls Status: Listing directory / Status: Calculating timezone offset of server... Command: mtime "AutomationTest" Response: 1233849901 Status: Timezone offsets: Server: -18001 seconds. Local: -18000 seconds. Difference: 1 seconds. Status: Directory listing successful Status: Retrieving directory listing... Command: cd "AutomationTest" Response: New directory is: "/AutomationTest" Command: ls Status: Listing directory /AutomationTest Error: No valid incoming packet found Error: Failed to retrieve directory listing

The folder in question can have upwards of some 5000 files at times.

No testing other than emptying the folder in question has been done to learn what that high limit might be.

Perhaps solution in this unusual case would be to only present partial list? or perhaps change to directory, but do not attempt to display entire contents?

If nothing else, being able to navigate to the folder at a minimum is important.

I have several Windows clients running Windows XP Pro SP3 and Windows Vista SP1. I have FileZilla client 3.2.0 installed. All these machines have a dual IPv4 and IPv6 configuration as I am currently testing IPv6. My DNS server (Windows 2003 Server SP2) returns both IPv4 and IPv6 addresses for my servers when queried.

My FileZilla sever (0.9.30) is running on a Windows XP SP3 machine, also with a valid IPv6 configuration.

When I use the FileZilla client to try and connect to a server for which my DNS server can return both an IPv6 address and an IPv4 address, the FileZilla client always tries to use the IPv6 address in preference to the IPv4 address. This might not be an issue except that the FileZilla server does not seem to listen to/accept connections on its host's IPv6 address. As a result the client is not able to connect. I have tried changing the binding order on the client machines to make IPv4 come before IPv6 but it does not help.

This seems like a bug to me. Surely use of IPv6 should at a minimum only be by explicit request? Ideally one could specify which to use as a default at the client level and maybe also with a host specific override. I imagine mixed environments are becoming quite common and this could become a big problem.

The idle time is WAY to short, but to make it worse, there is no way for the user to change this. A very strange omission! Many people probably falsely assume that they can change the "time out" setting, but this is only for transfers, not idle time. Why not let the user adjust this? I am tired of, every 30 seconds, having to re-connect and navigate back to the subdirectory on the server before I can ftp a file again. Thanks for hearing my rant - and yes I kind of would call this a "bug" :-)

This is for version 3.2.0 (and the previosu one).

Program Version: 3.2 When I encounter some folders on the remote server that have some or all of the characters in Cyrillic, they are displayed by the fine, but as soon, as I click on it, the second folder gets created with the wrong charset. The program takes me to the wrong charset folder, while the folder that has normal Cyrillic characters doesn't disappear. When I try to click on the correct version, it sends me back to the folder duplicate with the wrong charset. I can see all of the files and folders inside of the wrong charset folder, but I cannot do anything with them, only look at them. It gives me an error if I try to download or view files, or browse nested folders. When I type the directory path in address bar - same thing happens.

Gentlement, For several days now, I have been writing several simple perl scripts, and using filezilla to upload these text files to my server, and I kept getting 'Configuration Error' when trying to run the scripts. I contacted my host tech support, and they could not find any reason as to why this error was occuring. This morning I created a simple example from an old perl book, using Notepad (windows XP of course), and uploaded it with Firefox FireFTP plugin, which shows the ASCII transfer mode, and the script worked. I have gone into filezilla Edit Settings, and under Transfers->File Types, set this to ASCII, but it does not seem to make a difference. When uploading a file to my host, it shows the transfer as Normal. FYI... My email is trebor0926@…, if you want to pass on info to me.

You cannot to use FileZilla on www.110mb.com, as it does not allow multiple connections from the same IP.

Going to Site Manager - Transfer Setting - Limit simultaneous connections to 1 <-- does not work.

The only way is to change the global setting (Edit - Settings - Transfers).

Other than that FileZilla is the best, thanks.

As per summary, tasted on Gentoo Linux amd64 with filezilla client 3.1.3.1 and 3.2.0

I'm trying to upload a 700MB file to my web site. The connection inevitably interrupts before the entire file is uploaded. When I try to upload again, I get a screen from FileZilla asking me to select from several options - i.e. overwite, skip, resume, etc. I select resume and it attempts to resume the upload, but it doesn't work. The upload status bar appears and a few bytes transfer and then it resets and tries again. It does this at least 10 times before stopping. It never makes any progress.

The resume works with other FTP programs, but for some reason FileZilla uploads 10 times faster than all other programs. I wish I could use it, but it just won't work.

Latest version of Filezilla (3.2) when trying to select multiple directrories in remote site window only last click item is highlighted. In previous version, I could click first and shift-click last and all in between would be highlighted for download.

As far as I can tell, the only way to arrange existing sites into folder is to drag them onto the folder names in the site manager. Each folder is sorted alphabetically and there's nothing that can be done about that.

Right, so here's where the problem comes in. If one folder has so many sites that all you can see if that folder's sites, it's impossible to move a site out of that folder. Imagine that in your site manager you have a folder "Personal" and in there there's another folder "No longer used" or similar. Now imagine that the 'No longer used' folder has exactly 26 sites, labelled A-Z, and you want to me Site 'M' out to its parent folder 'Personal' (maybe the site's coming back into use, that was my specific problem). Because the window's only big enough to see C-M or H-R or M-W (see the problem?) you can't actually see the parent folder and thus ypou can't move M out.

Correct me if I'm wrong and there's a simple way to do this that I can't see, but as far as I can tell this is impossible.

I'm aware that the site manager window is resizeable, and luckily this fixed my specific problem, but this could still happen at maximum (screen resolution-restricted) size.

Basically, the fix I see is to make it so that the list view scrolls when you drag near the top or bottom, but I understand that this may be impossible due to not being implemented in wxWidgets. Alternatively, make the listing not force alphabetical sorting, that way one can slowly move it up the tree. Not ideal but definitely a solution. Maybe a button or right click action can "alphabetise this folder" or whatever for people who want that.

Filezilla Client version 3.2.0 Command button controls flicker sporadically on the macbook osx 10.5.5 / intel. This occurs throughout the application, even on the main page - the quickconnect button.

I work for a division of Honeywell International which operates and supports an IBM Systemz mainframe system running the z/VSE V4.2 Operating System. We are running the latest maintenance levels of all components there. I have been using FileZilla for several years to perform FTPS (FTP over implicit TLS/SSL) transfers from my workstation to/from the z/VSE host's SecureFTP server. Recently the Honeywell Global IT Security team which approves software for use within our environment approved FileZilla V3 for use. Previously I had been using V2.2.32 and based upon the new approval upgraded to V3.2.0.

Using V3.2.0 I can not successfully get past the TLS/SSL handshake when trying to connect to the z/VSE host. V2.2.32 still works fine. I am attaching the "Debug" logs from both V3.2.0 and V2.2.32.

Thanks in advance for your support.

Regards, Ken

Kenneth Ripple Manager, Information Technology Honeywell Security & Data Collection 263 Old Country Rd. Melville, NY 11747 (631) 692-1714 Office (631) 692-3475 Fax ken.ripple@…

When I used fzdefaults.xml, I get 2 Group (My Sites and Predefined Sites). When I select a sites in the groupe "Predifined Sites" I get an error messages :

Could not load "", please make sure the file is valid and can be accessed. Any changes made in the site manager will be not saved.

Everything works, but if my last selection was a predifined site I get the error message at startup.

The operating system was reset from XP home to XP Pro by the adaware program update - don't ask how - I have no idea, and neither does anyone else. BUT it reset all my accounts.

Filezilla was working wonderfully, but now I cannot connect.

The log is as follows

Connecting to probe.filezilla-project.org Response: 220 FZ router and firewall tester ready USER FileZilla Response: 331 Give any password. PASS 3.2.0 Response: 230 logged on. Checking for correct external IP address Retrieving external IP address from ​http://ip.filezilla-project.org/ip.php Checking for correct external IP address IP 81.20.183.83 ib-ca-bid-id Response: 200 OK PREP 1728 Response: 200 Using port 1728, data token 1895056417 PORT 81,20,183,83,6,192 Response: 200 PORT command successful LIST Response: 150 opening data connection

Please help as I have updates to load to a website

I installed FileZilla FTP client, started it, and an error message popped up:

Error loading xml file

Could not load "C:\Documents and Settings\Dženan Zukić\Application Data\FileZilla\filezilla.xml", make sure the file is valid. For this session, default settings will be used and any changes to the settings are not persistent.

OK

After clicking OK, several more similar messages are displayed, and file window is shown. Some more messages may appear during usage, all referring to the same file.

I believe that reason is character "ć", which is not included in charset ISO 8859-1 (US-ASCII) which is default on my system.

Again when closing the application, similar message is displayed.

Client 3.2.0 does not support Swedish characters åäö in path. Client report:

18:22:19 Command: RETR /srvmmxap001_e$/Home som Skall_Flyttas/1076/DOKUMENT/Bilder/Björk/PICT5534.JPG 18:22:19 Response: 550 /srvmmxap001_e$/Home som Skall_Flyttas/1076/DOKUMENT/Bilder/Björk/PICT5534.JPG: The system cannot find the path specified. 18:22:19 Error: Critical error 18:22:41 Status: Sending keep-alive command

The Default Remote Directory for a MVS server type worked in v3.1.6 but not in v3.2.0. In v3.1.6 a directory of the form 'test' was accepted and was used correctly. In v3.2.0, the same value returns message "Default remote path cannot be parsed. Make sure it is valid and is supported by the slected server type.". v3.2.0 will accept values of the form /'test' or \'test' but neither value is used or saved.

when making the columns bigger the temp guide line doesnt disappear after you resize the columns. you can min/max the window to get rid of it tho.

I am living in china, Simplified Chinese is the mainland's offical language. I used the Filezilla 3.2.0 to login into some ftp site which have some Simplified Chinese directories. The problem is that these directories was showed abnormally in the 'Remote site:' bar as below words: '/¡ô¶¯ÂþÒ»Çø¡ô'. But these directories were showed normally in the remote directories list.

I have to use the Filezilla 2.2.32, it is ok in this situation.

USS (Unix System Services) directories on Z/OS v1.9 are displaying as files not directories. If I click on them to see the sub directories it doesn't work. I get this error if I try: Status: Starting download of /websphere/v6r1/z4cell/z4node2_slibs/TNT_SYSTEM_PROPERTIES/BCT Command: CWD /websphere/v6r1/z4cell/z4node2_slibs/TNT_SYSTEM_PROPERTIES Response: 250 HFS directory /websphere/v6r1/z4cell/z4node2_slibs/TNT_SYSTEM_PROPERTIES is the current working directory Command: TYPE A Response: 200 Representation type is Ascii NonPrint Command: PORT 164,39,61,232,13,110 Response: 200 Port request OK. Command: RETR BCT Response: 550 Command RETR fails: /websphere/v6r1/z4cell/z4node2_slibs/TNT_SYSTEM_PROPERTIES/BCT is a directory. Error: Critical error Status: Disconnected from server

Simple bug really, possibly a limitation of wxWidgets.

I've noticed that the dropdown scrolls on my main monitor if the list becomes too large for the screen's height, but I have a second monitor with a lower resolution and the dropdown doesn't detect this lower resolution and compensate with the scroller.

If the list isn't big enough to scroll on my main monitor but it is too big for my secondary monitor then the list displays without any scrollers and goes off the bottom of the screen with no way to access the bottom items except by mousing over the bottom or top displayed items and then using the arrow keys and enter to select off-screen ones.

If the list it too big for my main monitor and thus too big for my smaller one, then the scrollers appear, but as before, the bottom scroller is off the screen, and I still have the problem.

I realise that this is something of an edge case, and I can temporarily fix it by reorganising my site manager to have fewer items in each folder, but I just thought I'd put this out there as it's definitely a bug (although as I said, probably a limitation of wxWidgets).

when uploading a newer version of an already existing file (selecting "overwrite" in the dialog box), the date-/time-info in the server list of that file is not updated subsequent to the completion of the download. in addition, the context menu does not provide an "acutalize" entry.

workaround: you have to change the actual directory and then go back to the original one (so that the list is created again) see the new (updated) date- and time-stamp of the file.

Hello,

I am running Windows XP SP3 and FZ 3.2.0. I am trying to download file from IIS 6 server hosted on W2K3. FZ fails, while WinSCP succeeds. I would expect that it is bug of IIS, but still WinSCP manages to retrieve a file. More info in log.

Running v3.2.0

If after starting Filezilla, you change the date and time on the workstation, the displayed timestamps of the files on the server are adjusted by the same amount.

To repeat error. Set time on workstation incorrectly by a large amount backwards ie 6 months Connect to server Correct time on workstations Timestamps on server files are now displayed as being 6 months in future.

Restarting Filezilla shows correct timestamps

I know that the local machine time should always be correct, but in this instance it was not when Filezilla was started.

The "Stop current operation" button is not available and I an unable to stop a download without quiting Filezilla. I am using Filezilla 3.2 on OSX 10.5.

If maximum number of session (set on the server) is exceeded and the client get error "530 Not logged in, too many connection" , the "Queue Items" was wrongly moved to "Failed Transfer Tab" (bug) => The client should maintain the queue until got the connection or get other error message.

There is a 'closed' bug about the same item but the solution is not really fixing the bug: Ticket #3394: "Too many connections" wrongly marked "Failed Transfer" ​http://trac.filezilla-project.org/ticket/3394

That bug is closed with remark "Increase the number of retries and the reconnect delay in the settings dialog to avoid this problem."

The solution is not really solution because say I increase 3 retries with delay 30s each (total 90s) to 10 retries with 60s delay (total 600s), then after 600s the same thing will happen (not fixing the problem, just delaying the problem)

I use client version 3.2.0 and still see this daily.

Here is how I recreate the problem easily:

1. Say the server maximum session from the same ip address is 8.
2. Place on the server a folder with hundreds of file (big and small: 1kb size to 500MB size), say 200 or more files (make sure the transfer will last long enough to observed). I call it "folder A"
3. Make a second folder "folder B" on server: just copy of 'folder a"
4. Download "folder A" with OTHER FTP CLIENT. (I use cuteftp 8.3.2) just make sure I use some of the session handler)
5. Now connect FILEZILA (set delay and retry to minimum) to server and download "folder B"
6. The "queued files" tab is filled with the file list, but soon enough they are wrongly moved to "Failed Transfer" tab.

This 'bug' is quite annoying because I transfer a big size quite frequently that usually takes 2-3 hours download and unattended. With this bug, after 3 hours I come back to the console only find that some of the files are on "Failed Transfer" tab and have to wait another 1 or 2 hours to complete that transfer. (My current solution of this problem is to use cuteftppro that is not giving me the problem, but as open source fanatic I reckon FileZilla should be able to overcome this small problem - hope this can be solved before the trial period over.. ;-) )

NOTE: the problem is still occurring even only 1 client connect to the server (the above just to exaggerate) - the key is have to be a lot number of file with various mix of size

Thank you for the great product and great job for all the team !

LOG: .... Response: 331 User name okay, need password. Command: PASS Response: 530 Not logged in, only 8 sessions from same IP allowed concurrently. Error: Could not connect to server Status: Resolving address of [domainname] Status: Connecting to xx.xx.xx.xx:21... Response: 150 Opening BINARY mode data connection for [filename] ([size] Bytes). Status: Connection established, waiting for welcome message... Response: 220 FTP Server ready... Command: USER [username] Response: 331 User name okay, need password. Command: PASS Response: 530 Not logged in, only 8 sessions from same IP allowed concurrently. Error: Could not connect to server Status: Resolving address of [domainname] Status: Connecting to xx.xx.xx.xx:21... Status: Connection established, waiting for welcome message... Response: 220 FTP Server ready... Command: USER [username] Response: 331 User name okay, need password. Command: PASS Response: 530 Not logged in, only 8 sessions from same IP allowed concurrently. Error: Could not connect to server Status: Resolving address of [domainname] Status: Connecting to xx.xx.xx.xx:21... Status: Connection established, waiting for welcome message... Response: 220 FTP Server ready... Command: USER [username] Response: 331 User name okay, need password. Command: PASS Response: 530 Not logged in, only 8 sessions from same IP allowed concurrently. Error: Could not connect to server Status: Resolving address of [domainname] Status: Connecting to xx.xx.xx.xx:21... Status: Connection established, waiting for welcome message... Response: 220 FTP Server ready... Command: USER [username] Response: 331 User name okay, need password. Command: PASS Response: 530 Not logged in, only 8 sessions from same IP allowed concurrently.

.....

Filezilla Client 3.2.0

If I try to enter a space into the name of a file or folder in the window from the server that shows the most detail (its headers are Filename Filesize Filetype ....), the space is executed as an instruction and not entered as a space.

This occurs ONLY when I double click to edit the name. If I use rename, I can enter a space.

Various flavors of this error occur when I try to enter a space into a name elsewhere in the Filezilla window.

PC: Windows XP Pro SP3 with 2GiB RAM and 3GHz Intel P4 Client: FileZilla 3.2.0 Server: ProFTPD 1.3.1

Hi guys,

some of the servers I connect to allow me to resume partially uploaded files. When there is also a file system quota set (and maxed out) for the connecting user I've noticed an issue with FileZilla where it will loop several hundred times (inconsistent number) in an attempt to force an upload of the file.

When there are hundreds of files in the queue and each file causes four to five hundred failed upload attempts it will be hammering the server to no end for hours. It would seem more logical to cancel all uploads for a user@server/dir with an error message when there is no more quota left (i.e. the server returns a 552 error). Full is full.

I will attach full debug logs but here is a summery: 2009-01-15 17:35:14 1484 1 Status: Starting upload of C:\ISO\Debian\debian-testing-i386-businesscard.iso 2009-01-15 17:35:14 1484 1 Command: STOR debian-testing-i386-businesscard.iso 2009-01-15 17:35:14 1484 1 Response: 552 Transfer aborted. Disk quota exceeded 2009-01-15 17:35:14 1484 1 Command: APPE debian-testing-i386-businesscard.iso 2009-01-15 17:35:15 1484 1 Response: 552 Transfer aborted. Disk quota exceeded 2009-01-15 17:35:15 1484 1 Command: APPE debian-testing-i386-businesscard.iso 2009-01-15 17:35:15 1484 1 Response: 552 Transfer aborted. Disk quota exceeded etc. etc...

When the server disables upload resuming the client will try a normal upload then only a few APPE (resulting in error 451) and then disconnect.

With ProFTPD's HiddenStores enabled (and APPE automatically disabled) the server will upload an incoming file with a temporary file name. If the transfer is interrupted with the 552 error the client will try the same upload again. Because the temporary name already exists the server returns a 550 error and FileZilla stops trying immediately.

It would also be nice to be able to set a retry limit for any kind of action and not just the connection retry limit.

Cheers, and thanks for an otherwise great FTP client!

I can't see my remote or local files since I updated to version 3.20.

Thanks, Rebecca Beasley

Hello, I've been using FileZilla for a long time now, and I love it and recommend it to all of my friends, so first off, great job! I appreciate the work you've put into FileZilla!

Just a little thing here - when I download several large files at once, typically, the file queue fills up to the point that I have to scroll, and I want to keep tabs on the progress of the files being downloaded, so I grab the resize bar dividing it from the upper 3/4 of the program, and drag it up so more queued files can be seen, but the progress bars all disappear, and I can't see the progress of any of the files any more. I can get it back, I believe by starting a new series of downloads, but with big files, I like to know how long they'll take to download.

Thanks! Paul Duquesnoy

Below are the logs. The connection is still open, but all I see is the ".." entry under the filename & <Directory listing failed> on the server side window. The Remote site: window shows the correct tree, which is the default directory I set up using the advanced tab from the Site Manager screen I used to define the FTPES connection. Other FTPES clients don't seem to have this issue connecting to this server. After I pasted the logs below, I attempted to change directories & again I got the same error as shown below. Though I did see the order of messages below the LIST command & the 150 response change sometimes.

Status: Resolving address of hetsft1.harrahs.org Status: Connecting to 10.3.5.87:21... Status: Connection established, waiting for welcome message... Response: 220 Secure FTP Server ready. Command: AUTH TLS Response: 234 SSLv23/TLSv1 Status: Initializing TLS... Status: Verifying certificate... Command: USER rms Status: TLS/SSL connection established. Response: 331 Password required for rms. Command: PASS Response: 230 Virtual user rms logged in. Command: SYST Response: 215 Cygwin Type: L8 Command: FEAT Response: 211-Extensions supported Response: CHMOD Response: IDLE Response: UMASK Response: HELP Response: AUTH Response: MIRR Response: RTCK Response: STCK Response: VERS Response: FEAT Response: CHPWD Response: PROT Response: PBSZ Response: APPE Response: XCRC Response: FEATURES Response: USER-AGENT Response: DISPOSITION Response: CCC Response: UTF8 Response: 211 END Command: OPTS UTF8 ON Response: 500 'OPTS UTF8 ON': command not understood. Command: PBSZ 0 Response: 200 PBSZ=0 Command: PROT P Response: 200 PROT command successful Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current directory. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (10,3,5,87,41,36) Command: LIST Response: 150 Opening BINARY mode SSL data connection for file list. Response: 226 Transfer complete. Status: Server did not properly shut down TLS connection Error: Transfer connection interrupted: ECONNABORTED - Connection aborted Error: Failed to retrieve directory listing

it should just wait, instead it fails and says password error

you can test it on my hosting account:

ftp: ftp.servage.net user: site1test password: test12341234

Command: PASV Response: 220 FTP Server # 1 Command: USER site1 Response: 227 Entering Passive Mode (77,232,67,104,245,60). Command: STOR Console_TestListener.php Response: 331 Password required for site1 Command: PASS Response: 530 Sorry, the maximum number of clients (5) from your host are already connected. Error: Could not connect to server Status: Resolving address of ftp.site1.co.il Status: Connecting to 77.232.67.104:21... Response: 150 Opening BINARY mode data connection for Console_TestListener.php Status: Connection established, waiting for welcome message... Response: 220 FTP Server # 1 Command: USER site1 Response: 226 Transfer complete Status: File transfer successful Response: 331 Password required for site1

WAIT, don't just close this, I know this is due to bugs on servers. Please read on.

I know that the "Server did not properly shut down TLS connection - ECONNABORTED" issue is caused by servers with bugs that create a security vulnerability. However, for those of us who LOVE FileZilla as a client, but don't have any control over the server we connect to, this issue renders FileZilla completely useless to us until the admins on the servers we connect to get their at together and fix/update their servers.

In the mean time, I think it would be a good move for FileZilla to allow servers with this problem, but treat the issue as a "WARNING" rather than an error that makes the FileZilla client useless.

Thanks,

-S

If the servertype is fixed to DOS Mode, then it's possible to create directories, but the removing of the same, empty directory fails. I don't even get an error.
The reason: command RMD is missing

I also installed filezilla server and tested it there. same problem here. If I set the servertype to standard, it works (so the rights are set correctly), but if I set servertype to DOS the command RMD is missing and the directory will not be deleted.

When I start File Zilla client I get this warning ...

Could not load C;\Documents and Settings\All mankind\FileZilla\queue.xml", please make sure the file is valid and can be accesses. The queue will not be saved.

The same warning comes when I close File Zilla!

When I try to access 'Getting Help' or 'Report a Bug' menu I get this warning notice ...

Windows cannot find '​http://file-zilla-project.org/support.php?type=client&mode=bugreport@version=3.20'. Make sure you typed the name correctly, and then try again. To search a file, click the Start button, and then click Search.

Also can I change default browser which File Zilla uses to access the net? File Zilla uses IE - I prefer using Opera and Firefox!

I am using the latest version 3.2.0 but have had this problem with the previous version too.

Apart from this I like File Zilla - it is a super FTP client!

All good wishes for 2009 to the entire team and thanks guyz!

Me Paparazzi

FOLDER WITH NAME LIKE "sub-domain.domain.ru_rB1QN#P" cant open with Filezilla, but Total Commander can open it

The speed that I have on the transfer line is not correct. It presents the average speed of the total transfer and IT SHOULD BE THE INSTANTANEOUS speed. If I limit the speed in 5 kb/second for exemple, this will drop so slowly, because it the average of the total transfer. And it is not correct. I want the speed to drop to 5 kb immediately to show the current speed upload. Ok, you could give average and instantaneous speed and that would be perfect! But this way, it is not what I expected to see. So the remain time is affected by this value too.

And thank you for this amazing piece of art! I use client and server versions.

Started filezilla, it said there is an update --> I updated as i ALWAYS do.( first install/upgrade option ) Started filezilla --> first error when clicking sitemanager: cannot open sitemanager.xml .... no changes will be ...

Then tried to import my filezilla.xml --> same error but then it says: import done , after restart ... I restart but that did not made any difference.

Think for more than one & 1/2 year it was running fine , update after update but now looks like I will have to insert all sites again becuase right now I cannot even ADD any site for it keeps returning the first error: cannot open ...

I run XP PRO XP3.

On both programs i have experienced the following error: Command: PASS Response: 421 I can't accept more than 1 connections as the same user Error: Could not connect to server Status: Delaying connection due to previously failed connection attempt... Response: 421 I can't accept more than 1 connections as the same user Error: Could not connect to server Status: Delaying connection due to previously failed connection attempt... This error is negated by terminating the connection which allows the transfer to take place. it occurs in both the down and upload routine.