always when i use the software the bar become like this

If I create a folder with a name that contains a blank space on begining of name, is nor crecognized and is impossible acces to it or download

Thank you for this awesome program,

Jorge

This log is anonymized. Size of cloudy_violet.JPG is 833,949 bytes. Filezilla 3.4.0 client (Linux) with encryption (Require explicit FTP over TLS).The connection timeout is nonsense. The FTP server is the last one which is sending an ACK and is waiting for Filezilla to do something - checked with wireshark. Without encryption, everything is working fine under Linux - but with encryption see this log. Only max. 180,224 bytes per session possible. Firewall was not active. Filezilla 3.4.0 client under Windows Vista is working flawlessly (with no encryption and encryption, too).

Status:	Resolving address of my.homepage.webpack.hosteurope.de
Status:	Connecting to 123.123.123.123:21...
Status:	Connection established, waiting for welcome message...
Response:	220 ::ffff:123.123.123.123 FTP server ready
Command:	AUTH TLS
Response:	234 AUTH TLS successful
Status:	Initializing TLS...
Status:	Verifying certificate...
Command:	USER account-xyz
Status:	TLS/SSL connection established.
Response:	331 Password required for account-xyz
Command:	PASS *****************
Response:	230 User account-xyz logged in
Command:	SYST
Response:	215 UNIX Type: L8
Command:	FEAT
Response:	550 FEAT: Operation not permitted
Command:	PBSZ 0
Response:	200 PBSZ 0 successful
Command:	PROT P
Response:	200 Protection set to Private
Status:	Connected
Status:	Retrieving directory listing...
Command:	PWD
Response:	257 "/" is the current directory
Command:	TYPE I
Response:	200 Type set to I
Command:	PASV
Response:	227 Entering Passive Mode (123,123,123,123,203,69).
Command:	LIST
Response:	150 Opening ASCII mode data connection for file list
Response:	226 Transfer complete
Status:	Directory listing successful
Status:	Retrieving directory listing...
Command:	CWD www
Response:	250 CWD command successful
Command:	PWD
Response:	257 "/www" is the current directory
Command:	PASV
Response:	227 Entering Passive Mode (123,123,123,123,203,156).
Command:	LIST
Response:	150 Opening ASCII mode data connection for file list
Response:	226 Transfer complete
Status:	Directory listing successful
Status:	Resolving address of my.homepage.webpack.hosteurope.de
Status:	Connecting to 123.123.123.123:21...
Status:	Connection established, waiting for welcome message...
Response:	220 ::ffff:123.123.123.123 FTP server ready
Command:	AUTH TLS
Response:	234 AUTH TLS successful
Status:	Initializing TLS...
Status:	Verifying certificate...
Command:	USER account-xyz
Status:	TLS/SSL connection established.
Response:	331 Password required for account-xyz
Command:	PASS *****************
Response:	230 User account-xyz logged in
Command:	PBSZ 0
Response:	200 PBSZ 0 successful
Command:	PROT P
Response:	200 Protection set to Private
Status:	Connected
Status:	Starting upload of /home/itsme/Desktop/cloudy_violet.JPG
Command:	CWD /www
Response:	250 CWD command successful
Command:	PWD
Response:	257 "/www" is the current directory
Command:	TYPE I
Response:	200 Type set to I
Command:	PASV
Response:	227 Entering Passive Mode (123,123,123,123,202,66).
Command:	STOR cloudy_violet.JPG
Response:	150 Opening BINARY mode data connection for cloudy_violet.JPG
Error:	Connection timed out
Error:	File transfer failed after transferring 180,224 bytes in 21 seconds
Status:	Resolving address of my.homepage.webpack.hosteurope.de
Status:	Connecting to 123.123.123.123:21...
Status:	Connection established, waiting for welcome message...
Response:	220 ::ffff:123.123.123.123 FTP server ready
Command:	AUTH TLS
Response:	234 AUTH TLS successful
Status:	Initializing TLS...
Status:	Verifying certificate...
Command:	USER account-xyz
Status:	TLS/SSL connection established.
Response:	331 Password required for account-xyz
Command:	PASS *****************
Response:	230 User account-xyz logged in
Command:	PBSZ 0
Response:	200 PBSZ 0 successful
Command:	PROT P
Response:	200 Protection set to Private
Status:	Connected
Status:	Starting upload of /home/itsme/Desktop/cloudy_violet.JPG
Command:	CWD /www
Response:	250 CWD command successful
Status:	Retrieving directory listing...
Command:	TYPE I
Response:	200 Type set to I
Command:	PASV
Response:	227 Entering Passive Mode (123,123,123,123,200,14).
Command:	LIST
Response:	150 Opening ASCII mode data connection for file list
Response:	226 Transfer complete
Command:	PASV
Response:	227 Entering Passive Mode (123,123,123,123,203,55).
Command:	APPE cloudy_violet.JPG
Response:	150 Opening BINARY mode data connection for cloudy_violet.JPG
Error:	Connection timed out
Error:	File transfer failed after transferring 180,224 bytes in 21 seconds
Status:	Resolving address of my.homepage.webpack.hosteurope.de
Status:	Connecting to 123.123.123.123:21...
Status:	Connection established, waiting for welcome message...
Response:	220 ::ffff:123.123.123.123 FTP server ready
Command:	AUTH TLS
Response:	234 AUTH TLS successful
Status:	Initializing TLS...
Status:	Verifying certificate...
Command:	USER account-xyz
Status:	TLS/SSL connection established.
Response:	331 Password required for account-xyz
Command:	PASS *****************
Response:	230 User account-xyz logged in
Command:	PBSZ 0
Response:	200 PBSZ 0 successful
Command:	PROT P
Response:	200 Protection set to Private
Status:	Connected
Status:	Starting upload of /home/itsme/Desktop/cloudy_violet.JPG
Command:	CWD /www
Response:	250 CWD command successful
Status:	Retrieving directory listing...
Command:	TYPE I
Response:	200 Type set to I
Command:	PASV
Response:	227 Entering Passive Mode (123,123,123,123,209,89).
Command:	LIST
Response:	150 Opening ASCII mode data connection for file list
Response:	226 Transfer complete
Command:	PASV
Response:	227 Entering Passive Mode (123,123,123,123,197,213).
Command:	APPE cloudy_violet.JPG
Response:	150 Opening BINARY mode data connection for cloudy_violet.JPG
Error:	Connection timed out
Error:	File transfer failed after transferring 180,224 bytes in 21 seconds
Status:	Resolving address of my.homepage.webpack.hosteurope.de
Status:	Connecting to 123.123.123.123:21...
Status:	Connection established, waiting for welcome message...
Response:	220 ::ffff:123.123.123.123 FTP server ready
Command:	AUTH TLS
Response:	234 AUTH TLS successful
Status:	Initializing TLS...
Status:	Verifying certificate...
Command:	USER account-xyz
Status:	TLS/SSL connection established.
Response:	331 Password required for account-xyz
Command:	PASS *****************
Response:	230 User account-xyz logged in
Command:	PBSZ 0
Response:	200 PBSZ 0 successful
Command:	PROT P
Response:	200 Protection set to Private
Status:	Connected
Status:	Starting upload of /home/itsme/Desktop/cloudy_violet.JPG
Command:	CWD /www
Response:	250 CWD command successful
Status:	Retrieving directory listing...
Command:	TYPE I
Response:	200 Type set to I
Command:	PASV
Response:	227 Entering Passive Mode (123,123,123,123,210,188).
Command:	LIST
Response:	150 Opening ASCII mode data connection for file list
Response:	226 Transfer complete
Command:	PASV
Response:	227 Entering Passive Mode (123,123,123,123,208,35).
Command:	APPE cloudy_violet.JPG
Response:	150 Opening BINARY mode data connection for cloudy_violet.JPG
Error:	Connection timed out
Error:	File transfer failed after transferring 180,224 bytes in 21 seconds
Status:	Resolving address of my.homepage.webpack.hosteurope.de
Status:	Connecting to 123.123.123.123:21...
Status:	Connection established, waiting for welcome message...
Response:	220 ::ffff:123.123.123.123 FTP server ready
Command:	AUTH TLS
Response:	234 AUTH TLS successful
Status:	Initializing TLS...
Status:	Verifying certificate...
Command:	USER account-xyz
Status:	TLS/SSL connection established.
Response:	331 Password required for account-xyz
Command:	PASS *****************
Response:	230 User account-xyz logged in
Command:	PBSZ 0
Response:	200 PBSZ 0 successful
Command:	PROT P
Response:	200 Protection set to Private
Status:	Connected
Status:	Starting upload of /home/itsme/Desktop/cloudy_violet.JPG
Command:	CWD /www
Response:	250 CWD command successful
Status:	Retrieving directory listing...
Command:	TYPE I
Response:	200 Type set to I
Command:	PASV
Response:	227 Entering Passive Mode (123,123,123,123,205,231).
Command:	LIST
Response:	150 Opening ASCII mode data connection for file list
Response:	226 Transfer complete
Command:	PASV
Response:	227 Entering Passive Mode (123,123,123,123,210,238).
Command:	APPE cloudy_violet.JPG
Response:	150 Opening BINARY mode data connection for cloudy_violet.JPG
Response:	226 Transfer complete
Status:	File transfer successful, transferred 113,053 bytes in 1 second
Status:	Retrieving directory listing...
Command:	PASV
Response:	227 Entering Passive Mode (123,123,123,123,198,187).
Command:	LIST
Response:	150 Opening ASCII mode data connection for file list
Response:	226 Transfer complete
Status:	Directory listing successful

Hi. When viewing remote files over 4GB (4,294,967,296), the high-order 32-bits of the 64-bit size is truncated. Hence, a file with a size of 4,973,821,282 appears as 678,853,986. This is in the Remote Site window.

Starting just yesterday, I have not been able to connect to the server. I continue to get the following message when logging on: Error: Connection timed out Error: Could not connect to server

This started after I had made several downloads to my webpage, and then I lost connection.

Everytime I try to upload a video to the server, I get this message. It is for my domain name steveruprecht.com

When I open filezilla (3.4 version) i receive this message :

Can't open file filezilla.xml (error 5: access denied)

Why ? Can I delete this file ?

Thanks

1- Connect to FTP Site 2- Browse FTP site to folder you wish to move 3- Drag folder to some where locally on the remote server 4- You get error Drag&drop between difference servers has not been implemented yet.

Prior to FZ 3.4.0 I was able to drag a folder to a new location, within the same server, now it thinks it's between two different servers.

I have tried to connect to a website to which I have been connecting for over a year. When I do, I repeatedly get error

Error: Critical error Error: Could not connect to server

I have tried clearing the history and starting from scratch. I have also re-insrtalled Filezilla from ​http://filezilla-project.org/support.php?type=client&mode=bugreport&version=3.4.0 I still get a problem. I have temporarily tried different FTP software, and that was successful. However, I would prefer to remain with Filezilla.

UPVC Windows - How To Make Sure That You Are Safe With Your UPVC Window

There are really some things that are not yet safe to have today. It is also very observable with those windows that are coming out now. Having ​UPVC windows might be the right one for you to have. Actually, there is not only one type of window but there are in fact many of them. That is the main reason that you must be very particular on the types of windows that you are getting.

You do not need to make some worries on how you can be able to get the best type of window because there are in fact many of them. But if you really want to have the perfect one, then ​UPVC windows are the most recommended windows that you must have. But behind this good ideas of a upvc window, you must also be very careful on having one because there might be some which can't be a safe one for you to have.

You want to get back the guy you love. You must find the best solutions on ​| how to get your ex boyfriend back. Through the solutions that you have in your mind you can start or begin to get your ex boyfriend back. You need to consider the best ways to get him back so that you make sure that you can get him back and you will be on his life.

There are best things that you need to do on ​| how to get your ex boyfriend back how to get your ex boyfriend back]. If you will do these things you can be surely achieve the positive result and you can get ack your ex boyfriend. Then, you can start again with new memories and this time you and your exboyfriend are now careful in handling your relationship.With this you know already that you can handle the other problems that both of you might encounter in your relationship.

You want to get back the guy you love. You must find the best solutions on ​how to get your ex boyfriend back. Through the solutions that you have in your mind you can start or begin to get your ex boyfriend back. You need to consider the best ways to get him back so that you make sure that you can get him back and you will be on his life.

There are best things that you need to do on ​how to get your ex boyfriend back. If you will do these things you can be surely achieve the positive result and you can get ack your ex boyfriend. Then, you can start again with new memories and this time you and your exboyfriend are now careful in handling your relationship.With this you know already that you can handle the other problems that both of you might encounter in your relationship.

Business Telephone Systems - How To Know About Business Phone Systems Information

There are still some people who are getting confused on how they can easily interact to their business clients. Now, that cannot anymore be a problem to you because there are in fact lots of ways to solve that. One of the greatest solution to that is having the ​business telephone systems. It is for the fact that a Business Telephone System is the key for you to be able to get some improvements with your business.

On the other hand, if you want to have the best results to your business, then all you have to do is to secure for ​business telephone systems. You do not have to actually make some worries for you to be able to get the best business telephone systems because there are in fact lots of ways to do that. Having the Business Telephone Systems is one way that you can be able to create an easy access to your clients and do your business transactions.

FileZilla Version: 3.4.0 (self compiled from source) Processor: Intel Pentium Dual-Core T4500(x86_64) OS: Ubuntu Maverick Meercat 10.04, running on Linux Kernel 2.6.35-28-generic Compiler: gcc (Ubuntu 4.4.3-4ubuntu5) 4.4.3 Compilerflags: -g -O2 -Wall -g -fexceptions Linked to: wxWidgets 2.8.10, GnuTLS 2.8.6 configure-options: --libtinyxml=builtin

Other important version-informations: X-Org X Server 1.7.6, GDM 2.30.5, Fluxbox 1.1.1

If FileZilla is minimized to Tray, clicking the Icon causes one of the follwing things:

1. The FileZilla Window Appears for a short period, then minimises itself again. A Second Tray-Icon appears besides the old one(s)

This steps can be performed several times, each time a new Icon appears, if nothing of the other cases appear

2. X-Server crashes and restarts (Logs below)

Logs: (Testing-Event around uptime 2179.12, real time approx Apr 26 00:0:23

Xorg.0.log:
[    68.209] (II) intel(0): Allocated new frame buffer 2688x1024 stride 10752, tiled
[  2179.122] (II) Power Button: Close
[  2179.122] (II) UnloadModule: "evdev"
[  2179.172] (II) Video Bus: Close
[  2179.172] (II) UnloadModule: "evdev"
[  2179.232] (II) Power Button: Close
[  2179.232] (II) UnloadModule: "evdev"
[  2179.292] (II) Sleep Button: Close
[  2179.292] (II) UnloadModule: "evdev"
[  2179.352] (II) Logitech USB Receiver: Close
[  2179.352] (II) UnloadModule: "evdev"
[  2179.412] (II) Logitech USB Receiver: Close
[  2179.412] (II) UnloadModule: "evdev"
[  2179.472] (II) Integrated Camera: Close
[  2179.472] (II) UnloadModule: "evdev"
[  2179.532] (II) AT Translated Set 2 keyboard: Close
[  2179.532] (II) UnloadModule: "evdev"
[  2179.682] (II) UnloadModule: "synaptics"
[  2179.742] (II) ThinkPad Extra Buttons: Close
[  2179.742] (II) UnloadModule: "evdev"
[  2179.802] (II) TPPS/2 IBM TrackPoint: Close
[  2179.802] (II) UnloadModule: "evdev"
[  2179.874]  ddxSigGiveUp: Closing log

Xorg.1.log:

X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-28-server x86_64 Ubuntu
Current Operating System: Linux oliver 2.6.32-28-generic #55-Ubuntu SMP Mon Jan 10 23:42:43 UTC 2011 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-28-generic root=UUID=3926b68e-13b8-497c-a00a-72f75b55e5c2 ro quiet splash
Build Date: 10 December 2010  05:52:57PM
xorg-server 2:1.7.6-2ubuntu7.5 (For technical support please see http://www.ubuntu.com/support) 
Current version of pixman: 0.16.4
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Thu Feb 17 15:09:43 2011
(==) Using config directory: "/usr/lib/X11/xorg.conf.d"
(==) No Layout section.  Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) |   |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
        Entry deleted from font path.
(==) FontPath set to:
        /usr/share/fonts/X11/misc,
        /usr/share/fonts/X11/100dpi/:unscaled,
        /usr/share/fonts/X11/75dpi/:unscaled,
        /usr/share/fonts/X11/Type1,
        /usr/share/fonts/X11/100dpi,
        /usr/share/fonts/X11/75dpi,
        /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
        built-ins
(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x7cb840
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.4
        X.Org Video Driver: 6.0
        X.Org XInput driver : 7.0
        X.Org Server Extension : 2.0
(--) using VT number 1


Fatal server error:
xf86OpenConsole: VT_WAITACTIVE failed: Interrupted system call


Please consult the The X.Org Foundation support 
         at http://wiki.x.org
 for help. 
Please also check the log file at "/var/log/Xorg.1.log" for additional information.

 ddxSigGiveUp: Closing log

Annotation: Server-Error already occured before crash and usually doesn't affect anything

syslog:

Apr 25 23:55:23 oliver ntpd[1721]: synchronized to 192.53.103.104, stratum 1
Apr 26 00:02:23 oliver acpid: client 1386[0:0] has disconnected
Apr 26 00:02:23 oliver acpid: client connected from 2967[0:0]
Apr 26 00:02:23 oliver acpid: 1 client rule loaded
Apr 26 00:02:23 oliver kernel: [ 2180.098902] Skipping EDID probe due to cached 
edid
Apr 26 00:02:23 oliver kernel: [ 2180.237401] Skipping EDID probe due to cached 
edid
Apr 26 00:02:25 oliver gnome-session[2990]: WARNING: Could not launch application 'metacity.desktop': Unable to start application: Kindprozess »metacity« konnte nicht ausgeführt werden (Datei oder Verzeichnis nicht gefunden)
Apr 26 00:02:25 oliver gnome-session[2990]: WARNING: Could not launch application 'gnome-power-manager.desktop': Unable to start application: Kindprozess »gnome-power-manager« konnte nicht ausgeführt werden (Datei oder Verzeichnis nicht gefunden)
Apr 26 00:02:25 oliver gdm-simple-greeter[2997]: Gtk-WARNING: /build/buildd/gtk+2.0-2.22.0/gtk/gtkwidget.c:5684: widget not within a GtkWindow
Apr 26 00:02:25 oliver gdm-simple-greeter[2997]: WARNING: Unable to parse history: (null)   1#012
Apr 26 00:02:25 oliver gdm-session-worker[3000]: GLib-GObject-CRITICAL: g_value_get_boolean: assertion `G_VALUE_HOLDS_BOOLEAN (value)' failed
Apr 26 00:02:32 oliver kernel: [ 2189.268649] Skipping EDID probe due to cached edid
Apr 26 00:02:33 oliver kernel: [ 2189.608599] Skipping EDID probe due to cached edid
Apr 26 00:06:11 oliver ntpd[1721]: synchronized to 192.53.103.108, stratum 1
Apr 26 00:08:40 oliver dhclient: DHCPREQUEST of 10.166.0.99 on eth0 to 10.166.0.8 port 67
Apr 26 00:08:40 oliver dhclient: DHCPACK of 10.166.0.99 from 10.166.0.8
Apr 26 00:08:40 oliver dhclient: bound to 10.166.0.99 -- renewal in 830 seconds.

No additional entries in messages-log, kern.log and debug-log

If you want to get a home loan then what you will need to do is approach a ​home loan broker. There should be a broker or an agency that handles home loan for you. If you think that looking for a good broker to loan you money for the property you want to buy is very hard to look for, then why not go online and search for a really good broker there. There should be hundreds of company willing to give you a broker for your home loan.

Now that you know how to get your very own home loan, all you need to do is to make sure that the mortgage company you will choose will have the best offer and for you to do that, just ​compare mortgages. There will be lots and lots of company that will be after you and for you to get the best offer for the mortgage then you need to compare the companies.

Hello,

I have read the previous posts regarding the .htaccess issue. I have enabled the raw logs and my .htaccess file is showing up. I am using FileZilla 3.0.4

Listing: type=file;size=17;modify=20110428014334;UNIX.mode=0604;UNIX.uid=7645816;UNIX.gid=100450;unique=1ag2d27955; .htacess

I also have enabled my server to "Force showing hidden files". I have this working on other machines but I have not been able to get it working since I reinstalled Win XP Pro. This isn't the end of the world because you can manually transfer a file but its kind of annoying when it used to work.

Thanks

}}}

Program crashes after deleting a file on the local machine.

I run the latest version 3.4.0 of FileZilla client on Ubuntu 11.04. Before deleting a file on the local machine from inside the program, I had connected to an ftp server an copied a file across. After this, the program is frozen, and the only option to recover is to reboot the machine. The name of the deleted file was index.php~.

I've been connecting to the server up until yesterday and have been using the same host, username and password.

When I accessed a server what only support "Active" transfer mode. It's folder can't display a folder with started with dot.

The fact is we have a folder /a/.b/ on the server, but the remote view panel show "Empty directory listing". While CuteFTP can show this folder well.

Command: CWD to_adobe Response: 250 Folder changed to "/a". Command: PWD Response: 257 "/a" is current folder. Status: Directory listing successful

Hello,

I noticed a severe security leak this morning. When you define shared folders for a user eg.:

• W:\MyFTP\jan

and add another shared folder e.a.

• W:\MyHomePage\Blog\jan\wp-content\uploads

Then filezilla server gives "jan access to:

• W:\MyFTP\jan and

W:\MyHomePage\Blog\jan (ignoring the rest of the path)

Very sevire IMHO

Louis

I did not see a fix for the user-submitted ticken in April. I have the same problem. You have to hit accept approx 15 diff times to connect and move around in the folders. THe other ticket with the same prbolem is 7277. How can we fix this with you or PC tools? Firezilla appears to modify its own binaries after every command line sent/received.

Summary Basically, in the event you have a directory containing tens of thousands of files (like a logs directory) FileZilla only shows the first 9998 files.

Steps to Reproduce

• Put 10 or 15k files in a directory
• FTP into that folder

Result: First 9998 files are listed

I wrote a crappy bash script that will create an arbitrary number of files in helping to help with reproducing this corner case of a bug: ​http://pastie.org/1875855

To use it:

• Create whatever.sh in a folder you want to test within
• Execute: chmod a+x whatever.sh to make it executable
• Run it as ./whatever.sh
• It will ask how many files you want

Other Stuff: I have reproduced this on Windows and OSX.

I can test on Linux if someone asks but I don't have a VM currently accessible so I took the lazy route :X

I created a ghost of my system which resulted in 3 files, 2 were 2147474666 bytes and the last was 654114517 bytes. If I copy these 3 files from windows xp to windows xp using native windows networking the destination files are created with the correct sizes. But if I use filezilla 3.4.0 to copy these files from windows to a linux server running an unpatched centos 5.4 distro, the file sizes at the destination are not the same as the source, different by several kb. If I run ghost, and verify the copied-to-linux image files (over a samba connection), ghost claims that the image is corrupted.

Just upgraded Ubuntu to 11.04 from 10.10.

I had no issue with Filezilla at all on 10.10. Now random freezes occur which make Filezilla totally unresponsive and require a restart, the app won't terminate normally when locked up.

I can't identify a specific action that can cause it - its appears to be random.

Ubuntu reports I have this version: 3.3.5.1-1ubuntu1 (filezilla)

Ticket #4204 is still an issue:

In preparation of the World IPv6 Day at 8 June 2011 we added AAAA Records in the DNS to the host names of our servers.

We can successful connect to all the services at the server via IPv6 - with the exception of the FileZilla Server, that does not offer IPv6 support.

This should not be an issue, because the Clients like web browsers or mail clients typically first try IPv6 and then fallback to IPv4, if no IPv6 connection can be established.

But the FileZilla Client does no fallback to the IPv4 address (what is also sent by the DNS server), FTP doesn't work any longer.

This could get an big issue and could cast a damning light on the FileZilla Client after IPv6 will be enabled by more and more ISP - not only at the World IPv6 Day!

I am running XP SP3. When I try to launch I get several XML errors. layout.xml (failed to write), queue.xml and filezilla.xml (access denied).

When connected to a server via SFTP, and it times out and disconnects, FileZilla doesn't automatically reconnect when selecting a remote folder in the folder tree. Instead, it gives an 'input_pushback not null!' error, followed by another error: 'Failed to retrieve directory listing.'

Clicking on yet another folder will force a reconnect. It's just selecting the first folder that gives this error. It used to work fine, but has been broken for 6 months or so.

10:47:50 AM: can't open file 'C:\Users\ShadowRune\AppData\Roaming\FileZilla\queue.xml' (error 5: access is denied.) 10:47:57 AM: can't open file 'C:\Users\ShadowRune\AppData\Roaming\FileZilla\filezilla.xml' (error 5: access is denied.) 11:09:57 AM: XRC resource 'ID_MENUBAR' (class 'wxMenuBar') not found! 11:09:57 AM: Cannot load main menu from resource file 11:09:57 AM: XRC resource 'ID_TOOLBAR' (class 'wxToolBar') not found! 11:09:57 AM: Cannot load toolbar from resource file 11:09:57 AM: XRC resource 'ID_QUICKCONNECTBAR' (class 'wxPanel') not found! 11:09:57 AM: Cannot load Quickconnect bar from resource file

downloaded an update from a security program I use (Advanced SystemCare) and do not know how to fix, I recently read a previous post, and changed my appdata folder to unhide and unchecked read only.

I found build bug - in installer edition FileZilla 3.50 RC1/RC2 file filezilla.exe have size at 99 Mb, but in Zip edition еры file have size ~ 30 Kb and don't work. Please check this files and correct buil script's.

Best regards, Victor

1) Right click a local file and chose "Edit". 2) Make a change to this file. 3) Switch back to FileZilla. 4) On the prompt whether to upload the file check "Finish editing and delete local file". 5) Answer with "Yes" or "No". This does not seem to matter.

To my understanding the local file is the file I chose for editing. However, this file is still there afterwards. I am not sure what the expected behavior in this case is. Personally I like the current one, but I am confused by the option saying the file will be removed.

FileZilla 3.5.0-rc2

To reproduce try to download a file to a folder where FileZilla has no write privileges. On current Windows version this could be C:\ for example as this would require elevated privileges.

The download appears correctly on the tab for failed transfers, but the reason is "Transferring".

I had problems with accented letters with Filezilla client freshly downloaded last friday, on a Windows 7 (which I expect to use unicode for filenames).

HYPOTHESIS both of the bug and what is causing it ;-)

I believe that if the filename contains a 'e acute' with unicode value 0xE9 and so have UTF8 value 0xC3 0xA9, then the created file will have the 'e acute' replaced with two unicode characters. The first being unicode value 0xC3 (A tilde) and the second the unicode value 0xa9 (copyright sign). Which I guess could happens if the createFile windows function called was the non-unicode one rather than the unicode one.

since update 3.5.0 the "change date", after having sent update files, on the extern site does not work any more

win7 box with filezilla version 3.5.0

The tool will transfer all the files with out any error or warnings but the destinations files are all zero length. it creates directories OK

i can transfer the files using the command window via command line ftp and the files to arrive and maintain the original file size.

the hosting service has no trouble using filezilla from a different box transfering data to the same account.

snip from log in filezilla window, i told it to overwrite if file existed.: Status: File transfer successful, transferred 52,359 bytes in 1 second Status: Starting upload of C:\Users\kevin\Pictures\bibble5\unprocessed\2011-04-30\web\DSC_2622.jpg Command: PASV Response: 150 Accepted data connection Response: 226 File successfully transferred Status: File transfer successful, transferred 50,038 bytes in 1 second Status: Starting upload of C:\Users\kevin\Pictures\bibble5\unprocessed\2011-04-30\web\DSC_2623.jpg Command: PASV Response: 227 Entering Passive Mode (99,198,127,42,118,179) Command: STOR DSC_2622.jpg Response: 227 Entering Passive Mode (99,198,127,42,119,182) Command: STOR DSC_2623.jpg Response: 150 Accepted data connection Response: 226 File successfully transferred Status: File transfer successful, transferred 50,121 bytes in 1 second Status: Starting upload of C:\Users\kevin\Pictures\bibble5\unprocessed\2011-04-30\web\DSC_2624.jpg Command: PASV Response: 150 Accepted data connection Response: 226 File successfully transferred Status: File transfer successful, transferred 48,051 bytes in 1 second Status: Starting upload of C:\Users\kevin\Pictures\bibble5\unprocessed\2011-04-30\web\DSC_2625.jpg Command: PASV Response: 227 Entering Passive Mode (99,198,127,42,120,153) Command: STOR DSC_2624.jpg

The configuration wizard results look like this: Connecting to probe.filezilla-project.org Response: 220 FZ router and firewall tester ready USER FileZilla Response: 331 Give any password. PASS 3.5.0 Response: 230 logged on. Checking for correct external IP address Retrieving external IP address from ​http://ip.filezilla-project.org/ip.php Checking for correct external IP address IP 173.174.91.5 bhd-bhe-jb-f Response: 200 OK PREP 61598 Response: 200 Using port 61598, data token 1799810361 PORT 173,174,91,5,240,158 Response: 200 PORT command successful LIST Response: 150 opening data connection Response: 503 Failure of data connection. Server sent unexpected reply. Connection closed

I am getting the 403 forbidden error on my website. My hosting site says it's not coming from them, the error is with Filezilla. www.integritychristianacademy.com We suspect that a former employee has made changes that made the site to crash. Our hosting site is 1and1, we have contacted them and they assured us that it is not on their end. HELP!

Sometimes the command/response window overwrites the menu bar, toolbar, and quick-connect bar when it scrolls up. Cannot reproduce every time, but it does happen often. Most recent version of client (3.5.0) still exhibits this behavior, which started two to four versions ago.

I am using filezilla 3.5.0 on windows 7 and find that the traditional Chinese folder names and file names became monster characters in the "remote site" box, but it is normal in the lower box.

This causes the failure of viewing and opening of the folder.

We are running into one issue to delete file. The file name contains QUIT as part of fil name, like "Hotel Quito - JW Marriott.pdf". Please help!

Version of FileZilla is 3.5.0

I have been using filezilla for years now and all of a sudden I seem to have lost access to all my stuff. I haven't changed my log in information or password at all and now I can't log in. I get a "Critical Error" and "Could not connect to server" It is vital I get this working asap.

Please help me in any way you can,

-Brad

When trying to quickconnect to my web hosting site, I get the messages: Error: Connection timed out Error: Could not connect to server

When I open my browser and type in the website, i am instantly taken there.

I haven't had a problem before upgrading to the latest release.

Rich Groski

I ran rats 2.3 on the FileZilla source code and RATS detected several LoadLibrary vulernabilities in FileZilla. RATS states: "LoadLibrary will search several places for a library if no path is specified, allowing trojan DLL's to be inserted elsewhere even if the intended DLL is correctly protected from overwriting. Make sure to specify the full path."

Looking at the below code snippets, you can see that the full path is not specified. Recommend the full path be specified in order to prevent this vulnerability from occurring.

AsyncGssSocketLayer.cpp

Line 670: m_hGSS_API = LoadLibrary(GFTPDLL);

AsyncSocketEx.cpp

Line 1122: m_hDll = LoadLibrary(_T("WS2_32.dll"));

AsyncSslSocketLayer.cpp

Line 312: m_hSslDll2 = LoadLibrary(_T("libeay32.dll"));

AsyncSslSocketLayer.cpp

Line 389: m_hSslDll1 = LoadLibrary(_T("ssleay32.dll"));

Random after some after some window switch.

Error in console: Gtk-CRITICAL : IAgtk_widget_event: assertion `WIDGET_REALIZED_FOR_EVENT (widget, event)' failed

I have been trying unsuccessfully to connect to my PVR for the past week or so. All I get is this message and then nothing...

Status: Connecting to 192.168.1.1:21... Status: Connection established, waiting for welcome message...

No error message or any other activity.

I have tried the forums but they couldn't help.

I have uninstalled and reinstalled FileZilla Client onto my computer, and restarting my PVR, resetting to factory my PVR (it is able to get IceTV Guide and Programs and access my network via the LAN cable - its just FileZilla that doesn't seem to work).

What do I do now?

after update to 3.5.0 (was working fine between same two machines a couple of days ago - only significant change is FileZilla client upgrade) connecting to one of my servers takes down my wireless router. By which I mean it kills the connection between client machine and router, and also connection between iMac (different machine) and iPhone.

Steps: 1) wireless connected fine on all three devices. these are the only devices connected to wireless, and client machine (Win7 laptop) and iMac are not using DHCP (iPhone is) 2)Attempt connection to a specific server (which happens to be running FileZilla Server - message logs from both ends of connection at bottom of report). Initial connection fine, but on the PORT step connection hangs. As I say, this worked fine between the same two machine in 3.4.x just a couple of days ago 3)All three devices are no longer able to connect to wireless. 4)Physically reset wireless router 5)Rinse and repeat (6 - 8 times before filing bug report)

Other notes: 1) windows command-line ftp works fine to drop files between these two machines

Client message log: 06:33:25 Trace: CControlSocket::DoClose(64) 06:33:25 Trace: CControlSocket::DoClose(64) 06:33:25 Status: Connecting to 208.116.32.234:21... 06:33:25 Status: Connection established, waiting for welcome message... 06:33:25 Trace: CFtpControlSocket::OnReceive() 06:33:25 Response: 220-Welcome to the FTP Server of Niche Music Group. 06:33:25 Trace: CFtpControlSocket::OnReceive() 06:33:25 Response: 220- 06:33:25 Response: 220-FileZilla Server version 0.9.37 beta 06:33:25 Response: 220-written by Tim Kosse (Tim.Kosse@…) 06:33:25 Response: 220 Please visit ​http://sourceforge.net/projects/filezilla/ 06:33:25 Trace: CFtpControlSocket::SendNextCommand() 06:33:25 Command: USER web_admin 06:33:25 Trace: CFtpControlSocket::OnReceive() 06:33:25 Response: 331 Password required for web_admin 06:33:25 Trace: CFtpControlSocket::SendNextCommand() 06:33:25 Command: PASS 06:33:25 Trace: CFtpControlSocket::OnReceive() 06:33:25 Response: 230 Logged on 06:33:25 Status: Connected 06:33:25 Trace: CFtpControlSocket::ResetOperation(0) 06:33:25 Trace: CControlSocket::ResetOperation(0) 06:33:25 Trace: CFileZillaEnginePrivate::ResetOperation(0) 06:33:25 Status: Retrieving directory listing... 06:33:25 Trace: CFtpControlSocket::SendNextCommand() 06:33:25 Trace: CFtpControlSocket::ChangeDirSend() 06:33:25 Command: PWD 06:33:25 Trace: CFtpControlSocket::OnReceive() 06:33:25 Response: 257 "/" is current directory. 06:33:25 Trace: CFtpControlSocket::ResetOperation(0) 06:33:25 Trace: CControlSocket::ResetOperation(0) 06:33:25 Trace: CFtpControlSocket::ParseSubcommandResult(0) 06:33:25 Trace: CFtpControlSocket::ListSubcommandResult() 06:33:25 Trace: state = 1 06:33:25 Trace: CFtpControlSocket::SendNextCommand() 06:33:25 Trace: CFtpControlSocket::TransferSend() 06:33:25 Trace: state = 1 06:33:25 Command: TYPE I 06:33:25 Trace: CFtpControlSocket::OnReceive() 06:33:25 Response: 200 Type set to I 06:33:25 Trace: CFtpControlSocket::TransferParseResponse() 06:33:25 Trace: code = 2 06:33:25 Trace: state = 1 06:33:25 Trace: CFtpControlSocket::SendNextCommand() 06:33:25 Trace: CFtpControlSocket::TransferSend() 06:33:25 Trace: state = 2 06:33:25 Command: PORT 69,128,109,218,193,134 06:33:45 Error: Connection timed out 06:33:45 Trace: CControlSocket::DoClose(2050) 06:33:45 Trace: CFtpControlSocket::ResetOperation(2114) 06:33:45 Trace: CControlSocket::ResetOperation(2114) 06:33:45 Trace: CFtpControlSocket::ResetOperation(2114) 06:33:45 Trace: CControlSocket::ResetOperation(2114) 06:33:45 Error: Failed to retrieve directory listing 06:33:45 Trace: CFileZillaEnginePrivate::ResetOperation(2114)

Server message log for same connection:

(000836)6/10/2011 4:12:25 AM - (not logged in) (69.128.109.218)> Connected, sending welcome message... (000836)6/10/2011 4:12:25 AM - (not logged in) (69.128.109.218)> 220-Welcome to the FTP Server of Niche Music Group. (000836)6/10/2011 4:12:25 AM - (not logged in) (69.128.109.218)> 220- (000836)6/10/2011 4:12:25 AM - (not logged in) (69.128.109.218)> 220-FileZilla Server version 0.9.37 beta (000836)6/10/2011 4:12:25 AM - (not logged in) (69.128.109.218)> 220-written by Tim Kosse (Tim.Kosse@…) (000836)6/10/2011 4:12:25 AM - (not logged in) (69.128.109.218)> 220 Please visit ​http://sourceforge.net/projects/filezilla/ (000836)6/10/2011 4:12:25 AM - (not logged in) (69.128.109.218)> USER web_admin (000836)6/10/2011 4:12:25 AM - (not logged in) (69.128.109.218)> 331 Password required for web_admin (000836)6/10/2011 4:12:25 AM - (not logged in) (69.128.109.218)> PASS (000836)6/10/2011 4:12:25 AM - web_admin (69.128.109.218)> 230 Logged on (000836)6/10/2011 4:12:25 AM - web_admin (69.128.109.218)> SYST (000836)6/10/2011 4:12:25 AM - web_admin (69.128.109.218)> 215 UNIX emulated by FileZilla (000836)6/10/2011 4:12:25 AM - web_admin (69.128.109.218)> FEAT (000836)6/10/2011 4:12:25 AM - web_admin (69.128.109.218)> 211-Features: (000836)6/10/2011 4:12:25 AM - web_admin (69.128.109.218)> MDTM (000836)6/10/2011 4:12:25 AM - web_admin (69.128.109.218)> REST STREAM (000836)6/10/2011 4:12:25 AM - web_admin (69.128.109.218)> SIZE (000836)6/10/2011 4:12:25 AM - web_admin (69.128.109.218)> MLST type*;size*;modify*; (000836)6/10/2011 4:12:25 AM - web_admin (69.128.109.218)> MLSD (000836)6/10/2011 4:12:25 AM - web_admin (69.128.109.218)> UTF8 (000836)6/10/2011 4:12:25 AM - web_admin (69.128.109.218)> CLNT (000836)6/10/2011 4:12:25 AM - web_admin (69.128.109.218)> MFMT (000836)6/10/2011 4:12:25 AM - web_admin (69.128.109.218)> 211 End (000836)6/10/2011 4:12:25 AM - web_admin (69.128.109.218)> PWD (000836)6/10/2011 4:12:25 AM - web_admin (69.128.109.218)> 257 "/" is current directory. (000836)6/10/2011 4:12:26 AM - web_admin (69.128.109.218)> TYPE I (000836)6/10/2011 4:12:26 AM - web_admin (69.128.109.218)> 200 Type set to I (000836)6/10/2011 4:12:45 AM - web_admin (69.128.109.218)> disconnected.

FileZilla crash by clicking on "Enter directory" where the Folder name include UTF8 chars. Test Folder name: "test - 鬼脈轉生 帝輪十年經典"

I am trying to upload a file at filezilla....and it says to me all the time error..it's been 1 day now....plz fix it asap.

Response: 552 Disk full - please upload later Error: Critical file transfer error

I was prompted to update version and my ftp connections no longer work since upgrading to version 3.5. Build date 2011-5-22.

Can you tell me how to correct this?

Error for all ftp connections to various servers:

Error: Connection timed out Error: Could not connect to server

Regards, Alain

The window displaying the connection activity consumes the entire header covering buttons and other features. See accompanying file for screen grab showing problem.

Client info pasted below. log file attached.

colleagues are using a 2.x version of filezilla in order to avoid this problem.

FileZilla Client

Version: 3.5.0

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2011-05-22 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 2.10.4

Operating system:

Name: Windows NT 6.1 (build 7600) Version: 6.1 Platform: 32 bit system

Hi I use FileZilla 3.5.0. And in the pane of Remote Site Files I can see ONLY 1998 files! The rest are impossible to see.

Please fix it. Thank you

When viewing a remote directory FileZilla will display a maximum of 7,998 files. I can log in via SSH and verify there are 17,438 jpg files in the given directory using the command "ls | wc -l".

None of the files hidden by FileZilla are hidden on the server, nor does my FTP login lack the permissions to see them (I use the same login for SSH, and the files are visible there).

This is occurring on a HostMonster.com account. I am unable to test whether this problem is limited to HostMonster.

To reproduce:

1. Put more than 7,998 files into a directory
2. Use FileZilla client to list the contents of that directory
3. Note that only 7,998 are shown

Client version 3.5.0

Configuration files should be in $HOME/.config/package/ as per the freedesktop guidelines: $XDG_CONFIG_HOME defines the base directory relative to which user specific configuration files should be stored. If $XDG_CONFIG_HOME is either not set or empty, a default equal to $HOME/.config should be used. See here: ​http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html for more details. I think this is a fairly easy task to do, and if everybody followed these guidelines we could maybe finally get rid of all these .dirs in the home directory.

Couldn't load on windows 7.. ​Buy Neopoints

Cannot download files from FTP server to local machine by dragging and dropping out of FileZilla.

I've tested on a Win 7 32-bit machine and it works fine so this is a 64-bit problem I presume, unless there strange system settings on the 64-bit machine that are not present on the 32-bit.

when change language in the Settings Panel half of FileZilla interface still use previews language. FileZilla Version : 3.5.0

file what special caracter ç d'not listed in server

I use Filezilla 3.5.0, my OS is Windows 7 . In Edit/Settings, I sepcify "use custom editor" and select Notepad++ using the Browse button and use filetype associations if available Click OK However when I view, edit a file, it opens it with Notepad, as opposed to Notepad++.

Only the upper portion of the Title Bar moves the window. The entire Title Bar should move the window.

When I try to rename local file to name that already exists, it overrides that file.

Example: I have 2 files test test1 renaming test1 to test replace test file without warning.

Trying the same on remote server throws alert saying filename already exists, what is good.

When I select File::Site Manager from the menu bar, a progress bar briefly appears and is replaced with a crash reporter.

I've attached a crash report from the Gnome system.

Here is the About info: FileZilla Client

Version: 3.5.0

Build information:

Compiled for: x86_64-pc-linux-gnu Compiled on: x86_64-unknown-linux-gnu Build date: 2011-05-22 Compiled with: x86_64-linux-gnu-gcc (Debian 4.4.5-8) 4.4.5 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++0x

Linked against:

wxWidgets: 2.8.12 GnuTLS: 2.8.6

Operating system:

Name: Linux 2.6.34.8-0.2-desktop x86_64 Version: 2.6

I deleted the files in a folder on the host (Yahoo! hosting) and when the folder was empty, I tried to delete the folder. The remove directory command says that the folder is not empty, but when I try to list the contents of the folder, FileZilla says that the folder is empty. (image attached) I have tried to delete the folder repeatedly, but it does not get deleted.

FileZilla Client

Version: 3.5.0

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2011-05-22 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 2.10.4

Operating system:

Name: Windows Vista (build 6002, Service Pack 2) Version: 6.0 Platform: 64 bit system

==

Command: PWD Response: 257 "/lenalena/blog" is current directory. Command: PASV Response: 227 Entering Passive Mode (69,147,83,172,193,128) Command: LIST Response: 150 Opening BINARY mode data connection for /lenalena/blog . Response: 226 Transfer complete. Status: Directory listing successful Status: Retrieving directory listing... Command: CWD xx Response: 250 CWD command successful. Command: PWD Response: 257 "/lenalena/blog/xx" is current directory. Command: PASV Response: 227 Entering Passive Mode (69,147,83,172,189,142) Command: LIST Response: 150 Opening BINARY mode data connection for /lenalena/blog/xx . Response: 226 Transfer complete. Status: Directory listing successful Command: CWD /lenalena/blog Response: 250 CWD command successful. Command: RMD xx Response: 550 /lenalena/blog/xx: Directory not empty. Status: Retrieving directory listing... Command: PASV Response: 227 Entering Passive Mode (69,147,83,172,188,167) Command: LIST Response: 150 Opening BINARY mode data connection for /lenalena/blog/xx . Response: 226 Transfer complete. Status: Directory listing successful Status: Retrieving directory listing... Command: CWD xx Response: 250 CWD command successful. Command: PWD Response: 257 "/lenalena/blog/xx" is current directory. Status: Directory listing successful Status: Sending keep-alive command Command: PWD Response: 257 "/lenalena/blog/xx" is current directory. Status: Sending keep-alive command Command: NOOP Response: 200 NOOP command successful. Status: Sending keep-alive command Command: PWD Response: 257 "/lenalena/blog/xx" is current directory.

Host: Windows Server 2008 SP2 x64

Version: FileZilla Server 0.9.39

Issue: Filezilla server process consumes an increasing amount of memory under load. On a busy system over few days to a week it eventually reaches 2GB of memory and ceases responding. A restart of the service resets usage to ~5MB, and growth begins again.

Observations: We have two instances of FZ server running on x64, a service system and a soon-to-be service system. So I have an opportunity if you can come up with tests to run.

It appears that each connection consumes a small amount of memory that is not released.

I am running the filezilla service under a domain account. switching to localsystem does not cure the issue.

This does not appear to happen on a 32-bit host machine we have that runs FZ server - this is an older version though and is not necessarily a fair test.

Over the last day or so I have had fun creating different types of load profiles. I've not been utterly scientific about this but have tested:

Single client instance repeatedly uploading/downloading 10MB file - little problem

Single client instance repeatedly uploading/downloading 10KB file - some leak

Multiple client instances repeatedly uploading/downloading 5Byte files - large leak.

Attached is a zipfile containing: ftpit.cmd - the script I used to create the files and the parallel connections. ftptest.txt - the ftp commands run to create activity (ftp-b is a cname to the server)

Open to suggestions/ideas/observations.

thanks!

Cannot horizontally scroll, only vertical.

after I updated I tried to log-in to use my filezilla on my mac and it won't let me.

Bonjour, Impossible de télécharger mes fichiers, voici l'erreur affichée:

552 Disk full - please upload later Erreur critique lors du transfert du fichier

Que faut-il faire pour corriger ce problème? Merci

cliccando "visualizza/modifica" su un file presente nella directory del sito compare il messaggio seguente "error 740 -per esguire l'operazione è necessaria l'esecuzione con privilegi elevati" Come risolvere il problema? Grazie

This is a repeated problem I've had with FileZilla, where certain folders get "stuck" and won't delete, no matter what I try. There are several in our Current Releases directory that I've been trying to delete for months. Any help would be appreciated. Thanks.

​ftp://ftp.mcculloughpr.com/(!)Current%20Releases/(Mecum)%202011%20Original%20Spring%20Classic%20Auction/

​ftp://ftp.mcculloughpr.com/(!)Current%20Releases/(Mecum)%20Rare%20Vette%20at%20Bloomington%20Gold%20Auction/

Removing the apostrophe compilation is successful in my case.

despise uninstalling the program and reinstalling the error message unable to access xml file comes up. all files are installed in users, owner roaming directory. the files cannot be found and the client does not connect to the server.

messages are as follows:" EACCES - Permission denied"

:Failed to write xml file

:Cannot open file with directory Users/owner/roaming, access denied ;error 5

Starting filezilla.exe either directly or with shortcut generates this error message:

Users\PM\AppData\Roaming\FileZilla\filezilla.xml Error reading Attributes For this session the default settings will be used. Any changes to the settings will not be saved.

As a result, the settings are dropped, and any settings entered cannot be saved. This bug appeared suddenly, without any cause that I can identify. It could not be corrected by uninstalling and re-installing, and it could not be corrected by downloading a new setup file and re-installing that. I will answer any questions that would help de-bug this. Thanks for helping.

Following is a copy of the filezilla.xml file:

<?xml version="1.0" encoding="UTF-8" standalone="yes" ?> <FileZilla3>

<Settings>

<Setting name="Use Pasv mode" type="number">1</Setting> <Setting name="Limit local ports" type="number">0</Setting> <Setting name="Limit ports low" type="number">6000</Setting> <Setting name="Limit ports high" type="number">7000</Setting> <Setting name="External IP mode" type="number">0</Setting> <Setting name="External IP" type="string" /> <Setting name="External address resolver" type="string">​http://ip.filezilla-project.org/ip.php</Setting> <Setting name="Last resolved IP" type="string" /> <Setting name="No external ip on local conn" type="number">1</Setting> <Setting name="Pasv reply fallback mode" type="number">0</Setting> <Setting name="Timeout" type="number">20</Setting> <Setting name="Logging Debug Level" type="number">0</Setting> <Setting name="Logging Raw Listing" type="number">0</Setting> <Setting name="fzsftp executable" type="string">&quot;C:\Program Files (x86)\FileZilla FTP Client\fzsftp.exe&quot;</Setting> <Setting name="Allow transfermode fallback" type="number">1</Setting> <Setting name="Reconnect count" type="number">2</Setting> <Setting name="Reconnect delay" type="number">5</Setting> <Setting name="Speedlimit inbound" type="number">0</Setting> <Setting name="Speedlimit outbound" type="number">0</Setting> <Setting name="Speedlimit burst tolerance" type="number">0</Setting> <Setting name="View hidden files" type="number">0</Setting> <Setting name="Preserve timestamps" type="number">0</Setting> <Setting name="Socket recv buffer size (v2)" type="number">4194304</Setting> <Setting name="Socket send buffer size (v2)" type="number">262144</Setting> <Setting name="FTP Keep-alive commands" type="number">0</Setting> <Setting name="FTP Proxy type" type="number">0</Setting> <Setting name="FTP Proxy host" type="string" /> <Setting name="FTP Proxy user" type="string" /> <Setting name="FTP Proxy password" type="string" /> <Setting name="FTP Proxy login sequence" type="string" /> <Setting name="SFTP keyfiles" type="string" /> <Setting name="Proxy type" type="number">0</Setting> <Setting name="Proxy host" type="string" /> <Setting name="Proxy port" type="number">0</Setting> <Setting name="Proxy user" type="string" /> <Setting name="Proxy password" type="string" /> <Setting name="Logging file" type="string" /> <Setting name="Logging filesize limit" type="number">10</Setting> <Setting name="Trusted root certificate" type="string" /> <Setting name="Number of Transfers" type="number">2</Setting> <Setting name="Ascii Binary mode" type="number">0</Setting> <Setting name="Auto Ascii files" type="string">am|asp|bat|c|cfm|cgi|conf|cpp|css|dhtml|diz|h|hpp|htm|html|in|inc|js|jsp|m4|mak|md5|nfo|nsi|pas|patch|php|phtml|pl|po|py|qmail|sh|shtml|sql|svg|tcl|tpl|txt|vbs|xhtml|xml|xrc</Setting> <Setting name="Auto Ascii no extension" type="number">1</Setting> <Setting name="Auto Ascii dotfiles" type="number">1</Setting> <Setting name="Theme" type="string">opencrystal/</Setting> <Setting name="Language Code" type="string">en</Setting> <Setting name="Last Server Path" type="string">1 0 3 usr 3 www 5 users 8 kamprint 5 video</Setting> <Setting name="Concurrent download limit" type="number">0</Setting> <Setting name="Concurrent upload limit" type="number">0</Setting> <Setting name="Update Check" type="number">1</Setting> <Setting name="Update Check Interval" type="number">7</Setting> <Setting name="Last automatic update check" type="string">2011-07-19 17:47:12</Setting> <Setting name="Update Check New Version" type="string" /> <Setting name="Update Check Check Beta" type="number">0</Setting> <Setting name="Show debug menu" type="number">0</Setting> <Setting name="File exists action download" type="number">0</Setting> <Setting name="File exists action upload" type="number">0</Setting> <Setting name="Allow ascii resume" type="number">0</Setting> <Setting name="Greeting version" type="string">3.5.0</Setting> <Setting name="Onetime Dialogs" type="string" /> <Setting name="Show Tree Local" type="number">1</Setting> <Setting name="Show Tree Remote" type="number">1</Setting> <Setting name="File Pane Layout" type="number">0</Setting> <Setting name="File Pane Swap" type="number">0</Setting> <Setting name="Last local directory" type="string">C:\Website\_we_info5\video\</Setting> <Setting name="Filelist directory sort" type="number">0</Setting> <Setting name="Queue successful autoclear" type="number">0</Setting> <Setting name="Queue column widths" type="string">180 60 180 80 60 150</Setting> <Setting name="Local filelist colwidths" type="string">120 80 100 120</Setting> <Setting name="Remote filelist colwidths" type="string">162 75 80 100 80 80</Setting> <Setting name="Window position and size" type="string">0 263 30 884 602 </Setting> <Setting name="Splitter positions (v2)" type="string">97 -131 500000000 135 135 500000000</Setting> <Setting name="Local filelist sortorder" type="string">1 3</Setting> <Setting name="Remote filelist sortorder" type="string">1 3</Setting> <Setting name="Time Format" type="string">1</Setting> <Setting name="Date Format" type="string">1</Setting> <Setting name="Show message log" type="number">1</Setting> <Setting name="Show queue" type="number">1</Setting> <Setting name="Size format" type="number">0</Setting> <Setting name="Size thousands separator" type="number">1</Setting> <Setting name="Default editor" type="string">0</Setting> <Setting name="Always use default editor" type="number">0</Setting> <Setting name="Inherit system associations" type="number">1</Setting> <Setting name="Custom file associations" type="string">&#x0A;jpg &quot;C:\Program Files\FullScreen Photo Viewer\FullScreen Photo Viewer.exe&quot;</Setting> <Setting name="Comparison mode" type="number">1</Setting> <Setting name="Comparison threshold" type="number">1</Setting> <Setting name="Site Manager position" type="string" /> <Setting name="Theme icon size" type="string">16x16</Setting> <Setting name="Timestamp in message log" type="number">0</Setting> <Setting name="Sitemanager last selected" type="string" /> <Setting name="Local filelist shown columns" type="string">1111</Setting> <Setting name="Remote filelist shown columns" type="string">110111</Setting> <Setting name="Local filelist column order" type="string">0,2,3,1</Setting> <Setting name="Remote filelist column order" type="string">0,2,3,1,4,5</Setting> <Setting name="Filelist status bar" type="number">1</Setting> <Setting name="Filter toggle state" type="number">0</Setting> <Setting name="Size decimal places" type="number">0</Setting> <Setting name="Show quickconnect bar" type="number">1</Setting> <Setting name="Messagelog position" type="number">0</Setting> <Setting name="Last connected site" type="string" /> <Setting name="File doubleclock action" type="number">0</Setting> <Setting name="Dir doubleclock action" type="number">0</Setting> <Setting name="Minimize to tray" type="number">0</Setting> <Setting name="Search column widths" type="string" /> <Setting name="Search column shown" type="string" /> <Setting name="Search column order" type="string" /> <Setting name="Search window size" type="string" /> <Setting name="Comparison hide identical" type="number">0</Setting> <Setting name="Search sort order" type="string"

Right click on a server file, and hit View/Edit. Make your changes, hit save. Should prompt to upload when focus is back on FileZilla. However this does not happen. Worked in Snow Leopard (10.6) but not Lion (10.7).

Tried to download file over sftp with space at begin of filename gives me:

path/filen name: open for read: no such file or directory

seems to trim filename.

Filezilla 3.5.0_x86_64

When ever I do server disconnect from Filezilla but in my SFTP server it still shows that the user is online. Is there anyway to logout so that in SFTP server it wont show that user is online anymore.

Toda vez que eu clico em algum arquivo dentro do FileZilla 3.5.0 e arrasto para a area de trabalho ou para alguma pasta sempre ocorre este erro "Não foi possível determinar o destino da operação de arrastar e soltar."

Current ver 3.5.0, problem found on 8/2/2011, never had this problem before. I try to drag and drop a file from the web address to a windows desktop and I get the circle and diagonal line that says you can't do it. Thanks, James

Our FTP server (Globalscape) has a no list files permission, so clients uploading cannot view or list the files on the server (security reasons). This has been working fine with previous version of FZ (3.1, 3.2), however in the latest version of FZ 3.5, this no longer works. Other FTP clients work fine also. As it used to work fine on previous versions of FZ, and now on new v3.5 no longer works, then I would categories it as a bug. Our problem is that we recommend our users to use FZ, as it's very simple robust, but were now getting clients reporting problems as they upgrade. Problem occurs on both the Windows and mac clients.

Status: Resolving address of sydftp.acp.com.au Status: Connecting to 203.18.241.160:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220 Trace: CFtpControlSocket::SendNextCommand() Command: USER scope Trace: CFtpControlSocket::OnReceive() Response: 331 Password required for scope. Trace: CFtpControlSocket::SendNextCommand() Command: PASS * Trace: CFtpControlSocket::OnReceive() Response: 230-Login OK. Proceed. Response: 230-Select the appropriate Magazine folder. Response: 230-NOTE users can only UPLOAD to the 'Send to ACP' folder Response: 230 If collecting files then look within the 'Pickup from ACP' folder, as DOWNLOADs are allowed. Trace: CFtpControlSocket::SendNextCommand() Command: SYST Trace: CFtpControlSocket::OnReceive() Response: 215 UNIX Type: L8 Trace: CFtpControlSocket::SendNextCommand() Command: FEAT Trace: CFtpControlSocket::OnReceive() Response: 211-Features supported: Response: COMB target;source_list Response: REST STREAM Response: SIZE Response: MDTM Response: XCRC filename;start;end Response: SSCN Response: MLST Size*;Modify*;Create;Type*;Unique;Perm*;Lang;Media-Type;CharSet; Response: XNOP Response: 211 END Status: Connected Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Retrieving directory listing... Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/" is current folder. Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: TYPE I Trace: CFtpControlSocket::OnReceive() Response: 200 Type set to I. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (203,18,241,160,109,97). Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: MLSD Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for MLSD /. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnConnect Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. 3263 bytes transferred. 3263 bps. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: CWD Womans Day Trace: CFtpControlSocket::OnReceive() Response: 250 Folder changed to "/Womans Day". Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/Womans Day" is current folder. Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (203,18,241,160,109,97). Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: MLSD Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for MLSD /Womans Day. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnConnect Trace: CTransferSocket::OnClose(0) Trace: CTransferSocket::TransferEnd(1) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. 204 bytes transferred. 204 bps. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Status: Directory listing successful Status: Retrieving directory listing... Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: CWD Send to ACP Trace: CFtpControlSocket::OnReceive() Response: 250 Folder changed to "/Womans Day/Send to ACP". Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/Womans Day/Send to ACP" is current folder. Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (203,18,241,160,109,97). Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: MLSD Trace: CFtpControlSocket::OnReceive() Response: 550 Permission denied. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Error: Failed to retrieve directory listing Status: Resolving address of sydftp.acp.com.au Status: Connecting to 203.18.241.160:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220 Trace: CFtpControlSocket::SendNextCommand() Command: USER scope Trace: CFtpControlSocket::OnReceive() Response: 331 Password required for scope. Trace: CFtpControlSocket::SendNextCommand() Command: PASS * Trace: CFtpControlSocket::OnReceive() Response: 230-Login OK. Proceed. Response: 230-Select the appropriate Magazine folder. Response: 230-NOTE users can only UPLOAD to the 'Send to ACP' folder Response: 230 If collecting files then look within the 'Pickup from ACP' folder, as DOWNLOADs are allowed. Status: Connected Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::FileTransfer() Status: Starting upload of C:\temp\PrePress Edit INGEST test files\ZZ-0511\co0511VIRTUALCARD.pdf Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: CWD /Womans Day/Send to ACP Trace: CFtpControlSocket::OnReceive() Response: 250 Folder changed to "/Womans Day/Send to ACP". Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/Womans Day/Send to ACP" is current folder. Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: FileTransferSubcommandResult() Status: Retrieving directory listing... Trace: ftpcontrolsocket.cpp(1296): List called from other command caller=0p157c1e8 Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: TYPE I Trace: CFtpControlSocket::OnReceive() Response: 200 Type set to I. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (203,18,241,160,109,97). Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: MLSD Trace: CFtpControlSocket::OnReceive() Response: 550 Permission denied. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: FileTransferSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: FileTransferSend() Command: SIZE co0511VIRTUALCARD.pdf Trace: CFtpControlSocket::OnReceive() Response: 550 Permission denied. Trace: FileTransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: FileTransferSend() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 425 Data connection already open. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PORT 10,68,70,44,16,18 Trace: CFtpControlSocket::OnReceive() Response: 425 Data connection already open. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: FileTransferSubcommandResult() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Error: File transfer failed Trace: CFtpControlSocket::FileTransfer() Status: Starting upload of C:\temp\PrePress Edit INGEST test files\ZZ-0511\co0511VIRTUALCARD.pdf Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: FileTransferSubcommandResult() Status: Retrieving directory listing... Trace: ftpcontrolsocket.cpp(1296): List called from other command caller=0p157c1e8 Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 425 Data connection already open. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PORT 10,68,70,44,16,19 Trace: CFtpControlSocket::OnReceive() Response: 425 Data connection already open. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: FileTransferSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: FileTransferSend() Command: SIZE co0511VIRTUALCARD.pdf Trace: CFtpControlSocket::OnReceive() Response: 550 Permission denied. Trace: FileTransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: FileTransferSend() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 425 Data connection already open. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PORT 10,68,70,44,16,20 Trace: CFtpControlSocket::OnReceive() Response: 425 Data connection already open. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: FileTransferSubcommandResult() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Error: File transfer failed Trace: CFtpControlSocket::FileTransfer() Status: Starting upload of C:\temp\PrePress Edit INGEST test files\ZZ-0511\co0511VIRTUALCARD.pdf Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: FileTransferSubcommandResult() Status: Retrieving directory listing... Trace: ftpcontrolsocket.cpp(1296): List called from other command caller=0p157c1e8 Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 425 Data connection already open. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PORT 10,68,70,44,16,21 Trace: CFtpControlSocket::OnReceive() Response: 425 Data connection already open. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: FileTransferSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: FileTransferSend() Command: SIZE co0511VIRTUALCARD.pdf Trace: CFtpControlSocket::OnReceive() Response: 550 Permission denied. Trace: FileTransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: FileTransferSend() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 425 Data connection already open. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PORT 10,68,70,44,16,22 Trace: CFtpControlSocket::OnReceive() Response: 425 Data connection already open. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: FileTransferSubcommandResult() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Error: File transfer failed Status: Retrieving directory listing... Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 425 Data connection already open. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PORT 10,68,70,44,16,23 Trace: CFtpControlSocket::OnReceive() Response: 425 Data connection already open. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Error: Failed to retrieve directory listing

this keeps happening when im tryin to get my server with filezille server

FilrZilla 3.5.0

When multiple alert dialog windows come up, I have no choice other than force quit the application. It doesn't allow me to press cancel or ok in any windows.

Today, I am connect a ftp server, in Win7 upload file OK, but in XP or win2003 upload file failed (download file is OK). I am at a loss what to do next. help me, thanks you .

i am using windows server 2008 R2, in RDP, where i have installed file zilla server interface,

in local i am using windows xp OS, here i installed FileZilla Client,

but after configuring path also i am not able to connect, i need your help to clear this issue, kindly give me solution as soon as possible,

Thanking You

Regards Waseem Habitat CTO

Hi FileZilla Team,

I recently discovered that files with umlaute (ö,ü,ä, …) are not shown in the directory listing or the directorys itself.

The Windows version works fine, it’s only am Mac problem. I use the newest FileZilla version. The problem exists on Snow Leopard and Lion.

I think this issue is also described in ticket 7406

Regards, Edgar

I can't connect to server. We have tried uninstalling and reinstalling but to no avail. If I take it out of Passive mode to sftp it is asking for a key. We can't seem to find anything. Is there anythng I can do to be able to continue using filezilla?

With Filezilla Client 3.5.0 there are a lot of information that don't show correcly. The symlinks don't show it, owner and group show the uid and permissions show strangely.

Server is ProFTPD 1.3.3d Server (ProFTPD Default Installation) with UNIX Type: L8.

The same ftp work fine with WinSCP.

I would like to report in your software the toolbar will disappear from the screen when the message log is scrolling.

I currently own the Toshiba and I noticed on your previous version of your software. This bug did not do this and the toolbar stayed exactly where it was and did not disappear. The only time I can get the toolbar to reappear is when I have to hit F5 and refresh the screen or minimize the window and then maximize it again which will cause the toolbar to reappear at which point we'll stay in its normal position without flickering so every time I open up the program before using it. I have to minimize the screen and then maximize it and then work up from there. I don't think it is my computer because the previous version did not do this. I just recently of graded to the newest version within a week and I noticed this glitch I don't know if anybody else is happening. This type of problem, but it is worth looking into because your program is such an asset to the community.

I captured a screenshot live of what it does but I see no way to import it into your ticket system to show you exactly what's going onif you need further information or you want to see in this video that captured of what exactly going on. Please contact me and I will find a way to get to the footage

I tried to report a bug of FileZilla and the website says my version is older than the current download version. But it's exactly the opposite.

"You are using an outdated version of FileZilla. Please understand that we can not give any support for outdated versions.

Your version: 3.3.5.1 Current version: 3.5.0"

连接到linux ssh协议; 可能是没刷新?然后计算时使用的是未刷新前的文件大小, 在服务器一直在生成文件,大小已改变.所以计算有误?

host is linux; connect by ssh; ie. the file is test.txt; flush file list now it say file is 5KB; but sever is writing the test.txt; by the end is may be 1MB; don't flush,allway it show text.txt is 5KB ; down it, the rate of progress is 100%; but it's not finished.

After upgrading to v3.5.1, SSH key authentication via agent no longer works. FileZilla sends blank password instead of using agent and reports "Authentication Failure."

Downgrading to 3.5.0 fixed the issue.

Steps: 1) load filezilla 2) Using the quick link to Site Manager I select an FTP site 3) Connect to site by clicking on the name 4) connection starts

• Connection Status starts to scroll
• Status display overwrites the Quick Connect Header area, just under the icon bar.

Steps to date: 1) Discovered it with the last update, 2) downloaded the latest update (see clipboard copy) 3) Tested per steps 1 - 4 above and found the same problem.

System: Windows 7, SP1

FileZilla Client

Version: 3.5.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2011-08-28 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 2.10.4

Operating system:

Name: Windows NT 6.1 (build 7601, Service Pack 1) Version: 6.1 Platform: 32 bit system

When I transfer one jpg file (picture of me) the size of the file is changed.Very strange. When I use CoreFTP evrything is OK.

E:\Dev\ASPMVC2\HomePage\img\tgphoto.jpg 185.424 bytes

/www/img/tgphoto.jpg 185.421 bytes

I tried it 15 times. I will attach this file. Thomas Graupner Germany

Hello does filezilla has a synchronize feauture? from local to ftp server or from ftp server to local.

hope you could help me thanks a lot.

I have done 3 times. I am using FileZilla 3.5.1 on my PC, MS-Windows, Ver 5.1(Build 2600.xpsp_sp3_....:Service Pack 3) I want to transfer 62,424 files, with names like PHO_0xxxxxxx-5_1003457.HL7;1 to an USB drive (E:) on my PC. I am connected to a VAX OpenVMS V8.2. To gather the names (LIST in FTP) takes about an hour. I then do a CTRL-A on the names in the "remote directory" screen, and put it into the "Home" screen. I am also watching My "Task Master" Perforamce tab, to watch the CPU Usage screen. After about 45 minutes, CPU Usage becomes 100% usage and no more files are being copied. I "stop" Filezilla and check the number of files on my USB "Memery stick" and all 3 times the same number files, 16,385. 16,385 = 214 + 1. These files are anywhere 1KB big to 120KB big. And they are 100% text files, or HL7 files.

If possible, let me know. Thanks

If we Download a File from a FTP Server, the Rights are changed. And we can't change it with chmod or a system buil-in GUI afterwards. We have to download it as a zip or as a .dmg for mac then it works. Theres not the rights themselves who are false setted. Because after chmod 777 the rights should be setted right and it also shown. But still we have no permission to write...

We were trying to ftp a file using port 22 (sftp). We set the file type option as 'Auto' and sftp'd the csv file to the unix. We see the control M charcters on the csv file. We tried the other option 'ASCII' but it still carried over the control M.

Friends,

my FileZilla, newest version 3.5.1, will not play the "finished"-sound after work.

Please tell me, what can i do.

Regards

Ratber

For years I have relied on FileZilla to overwrite existing files as a method to change the existing item. What I ended up doinf is deleting and then uploading the new file. Now after trying numerous times I get the message "Critical File transfer error". At first I thought it was my upload speed but its not, as I successfully changed files last week. The only difference is that I receive updates from Filezilla and because I chose to let it update for me, it would appear that trying to overwrite is next to impossible. Any suggestions?

I downloaded Frank's Mobile Money Machine, and in his video it says to highlight, then drag and drop to remote public_html. It won't do it. I need some help or I need to have someone go in remotely and help me fix this problem. Can you help?

When connecting to an internal FTP server with FileZilla Client, it was disconnected after sending a MLSD command. I don't know the server type but according to the result of FEAT, it doesn't support MLSD. FileZilla didn't provide me an option of not using MLSD.

Command: SYST Response: 215 UNIX Type: L8 Command: FEAT Response: 211-Features: Response: MDTM Response: MFMT Response: TVFS Response: MFF modify;UNIX.group;UNIX.mode; Response: MLST modify*;perm*;size*;type*;unique*;UNIX.group*;UNIX.mode*;UNIX.owner*; Response: REST STREAM Response: SIZE Response: 211 End Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (10,198,155,23,201,148). Command: MLSD Error: Disconnected from server: ECONNABORTED - Connection aborted Error: Failed to retrieve directory listing

Status: Connecting to sftp.jeppesen.com... Response: fzSftp started Command: open "boeingggi@…" 22 Error: ssh_init: Host does not exist Error: Could not connect to server Status: Waiting to retry... Status: Connecting to sftp.jeppesen.com... Response: fzSftp started Command: open "boeingggi@…" 22 Error: ssh_init: Host does not exist Error: Could not connect to server

The SFTP server is a IPSwitch WS_FTP Enterprise Server, version 7.5.1.2. There are two virtual directories in a home folder but a folder named "Jan 01 1601" is added to every site that I connect to. The folder does not exist at the file system and is not a virtual directory.

After some research the date "Jan 01 1601" has some significance in Windows. "January 1 of this year (1601-01-01) is used as the base of file dates[1] and of Active Directory Logon dates[2] by Microsoft Windows" -​http://en.wikipedia.org/wiki/1601

I've used tested the same site with WinSCP and native sftp in RedHat Enterprise Linux 5. The other SFTP clients does not display this folder.

See attached files for more details.