Custom Query (4044 matches)

When I open any of the accounts on my site manager, my screen goes black and then the message "display driver stopped responding and has recovered" appears. If the browser is open, it looks like the second page on the attached pdf, untill I close it and open it again.

This also happens when I click on a folder, download or upload a file.

1. Open Filezilla

2. The top 20% or so of the Filezilla UI is stuck at the top of the mac OSX screen and cannot be used, making the top window bar and top buttons of the Filezilla UI inaccessible

I'm using FileZilla and it has worked without problems for a long time. When I recently did an update I start to get problems with directory listings. I have now problems of logging into the FTP server. Then it comes to fetching directory listing it fails, the sequence is like this:

Status: Connected Status: Hämtar kataloglistning... (getting directory listing) Kommando: PWD Svar: 257 "/" Kommando: TYPE I Svar: 200 Switching to Binary mode. Kommando: PORT 85,226,158,91,207,136 Fel: Tidsgränsen för anslutningen överstegs (Time limit for connection exhausted) Fel: Misslyckades med att hämta kataloglistning (Failed to get directory listing)

Then the system stops (hangs). However the application is still responsive for new commands. Regards, Bo

Dear,

I’m a webmaster, and a daily user of Filezilla.

BUT: Every time a install a new version, Malware software gets installed without any option of not to select. The product is something called Optimizer Pro.

Every time I have a lot of work getting rid of that stuff.

1) Uninstall work ok 2) My Antimalware product (runs every day) gives results as shown below 3) Spybot gives results as show below, even after uninstall, so traces remain in registry!

Today again an email for a new Filezilla version, but I think I will remain on the old(er)version, or even swith to another cleaner ftp software.

Hi All,

something very very strange is happening to me.

Yesterday at some point Filezilla lost all password.

Now:

Im not able to directly install the new version FileZilla_3.9.0.5_win32-setup.exe getting "Product Configuration Missing"

with the zip file i can lounch filezilla but..

if i import my backup it works untile i enter in the Site Manager. As soon i enter in the Site Maneger all my 20 ftp site change instantly from "normal Access" to "ask for password"

i already tried several times

On launching the past two or three versions of FileZilla the top menu bar of the program is not visible. There is no way to "drag the window" to make it visible. It is somehow being blocked by the system menu bar, therefore there is no way to "quick connect."

This must be a compatibility issue with the very latest Mac OS because I don't have this problem on another machine that has not yet been updated with the latest OS.

Also, "component" select menu (below this window) was not allowing me to select the component, which I believe is "client." Seems to work when previewing the ticket.

Hi Guy's

When i have connection with my domain hosting and something has changed on the server side, by that i mean a new folder or a new file, i cannot see this in FileZilla. Even when I press F5, the local maps are beiing refreshed but the remote maps stay as the are. Likt it is beiing refreshed from a cache file ore something. To see the 'fresh' content on the remote folder i have to disconnect and reconnect.

I'm on mac 10.9.4. This is how filezilla is opening here. I can't move filezilla window because it's under the top bar.

Filezilla version is 3.9.0.5. I not sure but as I remember this started to happen after 3.9 update.

I've tried several times to transfer several large VMDK (VMware Disk) files via SFTP and noted that server hung several minutes into the transfer. I had walked away and could not determine why.

I started another transfer and watched the available RAM be reduced to 10% before I stopped Filezilla's transfer and closed the program. Upon closing the program, the RAM was not released. In fact, Process Viewer did not show the utilized RAM as associated with any program.

Confused further, I found a forum suggesting I run RAMMAN from Systernals to determine what was using all that memory. I found the VMDK file Filezilla was downloading was being transferred directly into RAM and the changes were not committing to disk as the download progressed. Smaller files (1-2MB, etc.) were committing to disk after the download was complete. The VMDK file I was downloading is ~56GB which is why the system's memory filled up and hung. There is not enough RAM to hold the entire VMDK.

I'm running the most recent stable release:

FileZilla Client

Version: 3.9.0.5

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2014-09-06 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.2 GnuTLS: 3.2.17 SQLite: 3.8.6

Operating system:

Name: Windows Server 2012 R2 (build 9600), 64-bit edition Version: 6.3 Platform: 64 bit system

I've had to turn to WinSCP to do my transfers which is 50% slower than Filezilla. Please let me know if there is any other info you require.

On my Windows the message log is shown overflow. May you fix it please?

I am putting my usual password and username but i am unable to log in but getting the following message:

Response: 530 Login authentication failed Error: Critical error: Could not connect to server

I'm getting the following error running the newest version of the software and connected to an FTP with settings "active" transfer, and trying to LIST the contents of a directory.

425 Unable to get local socket name (getsockname) [126 The specified module could not be found.]

I installed FileZilla roughly 8 months ago and have been performing all regular updates to the software.

thanks,

Sorting columns in queued files doesn't not work. I tried to sort by file size or any other colums and it didn't work

Starting point:

I've got Filezilla client open on a macBook with an attached Thunderbolt display. The lid of the macBook itself is closed, so only the Thunderbolt display is active. The Filezilla client is positioned normally somewhere in the center of the screen.

Actions:

Now I disconnect from the Thunderbolt display and I take the macBook with me. In a meeting I'm using the macBook normally, without any other displays attached (I didn't check the position of the Filezilla client). When returning to my desk, I connect the macBook to the Thunderbolt display, and then the Filezilla client has itself poisitioned mostly out of the screen. I can't change the location in any way anymore.

Screen shot of the new location of the Filezilla client (upload file?):

Please note that this is a different bug report from #3264.

Steps to reproduce:

• connect to a server
• on the local side (left), select a few folders
• right-click and upload

Expected result:

• for each folder, it should OBVIOUSLY first create the folder, then upload the files.

Observed results:

• for each folder, systematically, the "put" command to upload the first file in the folder is sent BEFORE the mkdir command to create the folder. So, unless the folder already existed on the server, that file upload gives an error and is not uploaded.

ALSO, whenever a file gives an error it should be kept in the queue so that you can retry!!!

This level of unreliability make FileZilla completely unusable. You have to check all the files one by one, because there may have been any such random error and you wouldn't even know.

I think this is a regression. I have used FileZilla for ages and had never seen such a thing before.

Example log when uploading a folder called "runtime" within one called "protected":

Status: Starting upload of /home/teo/Documents/xxxxx/protected/runtime/application.log.4 Error: Directory /srv/www/xxxxx/protected/runtime: no such file or directory Command: cd "/srv/www/xxxxx/protected" Response: New directory is: "/srv/www/xxxxx/protected" Command: mkdir "runtime"

Steps to reproduce:

• connect to a server
• on the local side (left), select a few folders
• right-click and upload

Expected result:

• for each folder, it should OBVIOUSLY first create the folder, then upload the files.

Observed results:

• for each folder, systematically, the "put" command to upload the first file in the folder is sent BEFORE the mkdir command to create the folder. So, unless the folder already existed on the server, that file upload gives an error and is not uploaded.

ALSO, whenever a file gives an error it should be kept in the queue so that you can retry!!!

This level of unreliability make FileZilla completely unusable. You have to check all the files one by one, because there may have been any such random error and you wouldn't even know.

I think this is a regression. I have used FileZilla for ages and had never seen such a thing before.

Example log when uploading a folder called "runtime" within one called "protected":

Status: Starting upload of /home/teo/Documents/xxxxx/protected/runtime/application.log.4 Error: Directory /srv/www/xxxxx/protected/runtime: no such file or directory Command: cd "/srv/www/xxxxx/protected" Response: New directory is: "/srv/www/xxxxx/protected" Command: mkdir "runtime"

There are no images or files showing up in either the local or remote host. This happened after updating to the latest version of 3.9.0.5

I am using filezilla 3.9.0.6 on linux with wxWidgets 3.0.2.

After starting filezilla, without connecting to a server or doing anything, the filezilla process uses 99% of a CPU Core, and the X-Server process raises its CPU load from 1% to about 60%.

When I click on the right side of the windows(Remote Website),if the folder name is chinese,then there will be another folder with messy code name,and the origional folder is still be shown in the list.

After first successful connection, i can upload file or files, but the next time I try to upload another file in the directory, it tells me it cannot connect to the server, response 421

We are getting ready to start implementing AppLocker in our environment. We use FileZilla extensively. Can you guys start entering your signature into the EXEs you create? The publisher information. This will help on allowing people in our organizing to be able to update their own Clients without the IT department needing to be involved everytime you do an update. I am attaching to what it looks like with I retrieve the info from Excel from Microsoft to put into Applocker.

Hello,

Trying to search for files bigger than 4 gigabytes. I have the option in bytes which after my math should be 4000000000 FileZilla gives the error:Invalid size in condition. How can one search for large files over 2 GB?

Operating System is Windows 7 x64 FileZilla version is 3.9.0.6

Thank you

working w/ two external monitors on Mac OS X 10.10 Yosemite and FZ client 3.9.0.6 is sometimes only showing lower half of FZ window. Other upper half is out of monitor. Could be a Mac OS X 10.10 Yosemite bug as well.

For some reason uploads start to fail soon as the successful transfer count reaches 14,385 (or close to this number).

This happens both when a large directory holding in excess of 14,385 files is uploaded and also when several smaller uploads totalling more than 14,385 files are uploaded.

The only way I have found around this is to pause the upload when the successful upload count gets close to 14,300 then shutdown FileZilla to clear the successful transfer log count, re-open FileZilla and resume the transfer of files in the queue.

If there is a way around this I will appreciate someone telling me.

Thank you.

Paul

I have a very large file -- 320+MB -- and when I upload it to our FTP Side, after about 30-45 minutes, it ALWAYS ends on the Failed Transfers list with the reason "could not start transfer."

This error is (a) obviously erroneous as it just uploaded the file. I can verify this by first deleting the version on the site and then uploading a new version. When it's done uploading the new version is there; and (b) it didn't actually fail because if I download the file (which is a signed exe) it passes all integrity checks and its signature is still intact which it wouldn't be if it had failed.

If you'd like to grab the file to play with it's at:

​http://wwww.frameforge3d.com/web_install/FrameForgePreviz35_setup.exe

if i want to send a pdf file to my pc the file transfer ends in an critical error only if one german umlaut is inside the filename (the file is created at server side with ISO8859)

When going through the install process for the client on OS X, MacKeeper is installed. This shouldn't happen.

When I start a new connection and it's successful, the file toolbar and the website details (port, domain etc.) toolbar disappear. When I wave my mouse pointer over where they're supposed to be they reappear but only where the tabs are.

Hi,

applying a filename change causes FileZilla (version 3.9.0.6 and earlier) to crash.

Steps to reproduce:

1. Click right on a file (of your local filesystem)
2. Select "Rename"
3. Change the name of the file
4. Apply your change by pressing [Enter].
5. => FileZilla crashes

See the attached logfile.

Best Regards, Ettore Atalan

Uploading empty Folders crashes Filezilla. Folder Structure ist /images/

2012/

Januar/ Februar/ März/

/images/

2013/

Januar/ Februar/ März/

Since the major update on FileZilla version 3.9.0 the performance became very poor and the GUI very unresponsive during file transfers. I found a similar ticket here in #9667.

I tested this doing a FTP file transfer (10 simultaneous transfers) of 4403 files in 337 subdirectories with a total size of 42,3 MB with the following results: FileZilla 3.9.0.6: Took about 8 minutes to do the transfer and the GUI was very unresponsive during the transfer.

FileZilla 3.8.1: Took lees than 2 minutes and the GUI was totally responsive during the whole transfer.

I currently decided to roll back to version 3.8.1 until this is fixed.

May I help you with further details to fix this issue?

FTPS stopped working in the new update for FileZilla.

Log and message from ISP (Newtek/The Small Business Authority) below: Response: 227 Entering Passive Mode (216,119,77,223,82,18). Command: STOR ship_part1.jpg Response: 150 Opening BINARY mode data connection. Response: 150 Opening BINARY mode data connection. Response: 550 The supplied message is incomplete. The signature was not verified. Error: File transfer failed Status: Starting upload of C:\Users\Jeff\Documents\Visual Studio 2010\Projects\YargisCompetitionWeb\YargisCompetitionWeb\bin\release\Images\prelaunch\ship_part4.jpg Status: Retrieving directory listing... Command: PASV Response: 227 Entering Passive Mode (216,119,77,223,82,13). Command: LIST Response: 150 Opening BINARY mode data connection. Response: 550 The supplied message is incomplete. The signature was not verified. Error: File transfer failed after transferring 320,442 bytes in 6 seconds Status: Starting upload of C:\Users\Jeff\Documents\Visual Studio 2010\Projects\YargisCompetitionWeb\YargisCompetitionWeb\bin\release\Images\prelaunch\ship_part3.jpg Status: Retrieving directory listing... Response: 226 Transfer complete. Command: PASV Command: PASV Response: 227 Entering Passive Mode (216,119,77,223,82,25). Command: STOR ship_part3.jpg Response: 227 Entering Passive Mode (216,119,77,223,82,21). Command: STOR ship_part4.jpg Response: 150 Opening BINARY mode data connection. Response: 150 Opening BINARY mode data connection. Response: 550 The supplied message is incomplete. The signature was not verified. Error: File transfer failed after transferring 320,442 bytes in 9 seconds Status: Starting upload of C:\Users\Jeff\Documents\Visual Studio 2010\Projects\YargisCompetitionWeb\YargisCompetitionWeb\bin\release\Images\prelaunch\ship_part3.jpg Status: Retrieving directory listing...

Hello, Thank you for contacting Newtek, The Small Business Authority. My name is Bryan with the Tech Support Team and I understand that you are having an issue when attempting to upload files to your site using FTPS on port 990. In looking into this issue for you, it would appear that the issue is related to the FTP client you are using when trying to upload files. I was able to replicate the issue using Filezilla. In speaking with one of my Tier 3 Tech Support Agents, I was informed that there is a know issue currently with Filezilla and other clients with uploading files using FTPS. They advised that I try a different FTP client such as CuteFTP to complete the upload using FTPS. I downloaded CuteFTP and confirmed that uploads are successful when connecting with FTPS. Please test on your end and let us know if you run into any further issues. Thank You,

Bryan S. Associate of Technical Support Newtek Technology Services Phone: (602) 263-0300 Opt. 5 URL: ​http://webservices.thesba.com

Antwort: 220 Speak friend, and enter Befehl: USER kinderschutzbund-pinneberg.de Antwort: 331 FTP login okay, send password. Befehl: PASS Antwort: 530 Login incorrect Fehler: Kritischer Fehler: Herstellen der Verbindung zum Server fehlgeschlagen

FileZilla Client

Version: 3.9.0.5

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2014-09-06 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.2 GnuTLS: 3.2.17 SQLite: 3.8.6

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64 bit system

Hi,

Thought it strange that the automatic Filezilla client updates are finding their way to my ~/Documents folder instead of ~/Downloads

Guessing this is just a "typo" or something, as downloading an application into the Documents folder doesn't make a whole lot of sense!

I have upgraded and since the upgrade I am unable to connect.

Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of fabricgarden.3dcartstores.com Status: Connecting to 173.192.94.225:21... Error: Connection timed out Error: Could not connect to server

Hey the past few days I have found my DL speed has dramatically dropped from 1.4mbps to 50kbs, I have went through the forums & tried everything & nothing works, ive checked my broadband speed & its fine

​http://www.speedtest.net/my-result/3932668942

FileZilla's GUI freeze when CPU use exceed ~20%.

You can produce this situation with:

• Core i3 on eco mode
• gigabit connectivity
• FTPS AES-256-GCM connection
• a big file (more than 1Gio)

FileZilla Client Version: 3.9.0.6

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2014-10-16 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.19 SQLite: 3.8.6

Operating system:

Name: Windows 8.1 (build 9600), 64-bit edition Version: 6.3 Platform: 64 bit system

Buddy of mine runs a server that doesn't allow password authentication at all, only allows public-private key exchange. Since the keyfile is password-protected I've got Pageant set up and working for PuTTY for shell access, but FileZilla doesn't want to cooperate.

I tried using this same Pageant/Filezilla/key combo to get onto my webserver, which has the same pub key installed (but allows password authentication as well if I choose to use it), and everything works. I can paste that logfile also if needed.

I believe this to be similar to ticket #8934 (​http://trac.filezilla-project.org/ticket/8934) but since that never got resolved I guess I don't know for sure. In the logs below, I've modified the server name by inserting SERVER where relevant to mask a portion of it.

This is using Filezilla version 3.9.0.6 (latest according to Checking for Updates as of this posting) running on Win7 SP1. There is only one key loaded into Pageant, which is Release 0.62.

12:14:04 Command: open "at0m@…" 22 12:14:04 Trace: Looking up host "einstein.SERVER.org" 12:14:04 Trace: Connecting to 5.9.99.76 port 22 12:14:04 Trace: Server version: SSH-2.0-OpenSSH_6.0p1 Debian-4+deb7u2 12:14:04 Trace: Using SSH protocol version 2 12:14:04 Trace: We claim version: SSH-2.0-PuTTY_Local:_Oct_16_2014_11:15:32 12:14:04 Trace: Doing Diffie-Hellman group exchange 12:14:05 Trace: Doing Diffie-Hellman key exchange with hash SHA-256 12:14:05 Trace: Host key fingerprint is: 12:14:05 Trace: ssh-rsa 2048 f6:f2:7d:07:e8:d1:a8:b1:cf:da:6b:07:bc:59:4d:ea 12:14:05 Trace: Initialised AES-256 SDCTR client->server encryption 12:14:05 Trace: Initialised HMAC-SHA-256 client->server MAC algorithm 12:14:05 Trace: Initialised AES-256 SDCTR server->client encryption 12:14:05 Trace: Initialised HMAC-SHA-256 server->client MAC algorithm 12:14:05 Trace: Pageant is running. Requesting keys. 12:14:05 Trace: Pageant has 1 SSH-2 keys 12:14:05 Trace: Trying Pageant key #0 12:14:05 Trace: Server refused public key 12:14:05 Trace: Disconnected: No supported authentication methods available (server sent: publickey) 12:14:05 Error: Disconnected: No supported authentication methods available (server sent: publickey) 12:14:05 Trace: CControlSocket::DoClose(64) 12:14:05 Trace: CSftpControlSocket::ResetOperation(66) 12:14:05 Trace: CControlSocket::ResetOperation(66) 12:14:05 Error: Could not connect to server 12:14:05 Trace: CFileZillaEnginePrivate::ResetOperation(66) 12:14:05 Status: Waiting to retry... 12:14:10 Trace: CControlSocket::DoClose(64) 12:14:10 Trace: CControlSocket::DoClose(64) 12:14:10 Status: Delaying connection for 1 second due to previously failed connection attempt... 12:14:10 Status: Connecting to einstein.SERVER.org... 12:14:10 Trace: Going to execute "C:\Program Files (x86)\FileZilla FTP Client\fzsftp.exe" 12:14:10 Response: fzSftp started 12:14:10 Trace: CSftpControlSocket::ConnectParseResponse(fzSftp started) 12:14:10 Trace: CSftpControlSocket::SendNextCommand() 12:14:10 Trace: CSftpControlSocket::ConnectSend() 12:14:10 Command: open "at0m@…" 22 12:14:10 Trace: Looking up host "einstein.SERVER.org" 12:14:10 Trace: Connecting to 5.9.99.76 port 22 12:14:11 Trace: Server version: SSH-2.0-OpenSSH_6.0p1 Debian-4+deb7u2 12:14:11 Trace: Using SSH protocol version 2 12:14:11 Trace: We claim version: SSH-2.0-PuTTY_Local:_Oct_16_2014_11:15:32 12:14:11 Trace: Doing Diffie-Hellman group exchange 12:14:11 Trace: Doing Diffie-Hellman key exchange with hash SHA-256 12:14:11 Trace: Host key fingerprint is: 12:14:11 Trace: ssh-rsa 2048 f6:f2:7d:07:e8:d1:a8:b1:cf:da:6b:07:bc:59:4d:ea 12:14:11 Trace: Initialised AES-256 SDCTR client->server encryption 12:14:11 Trace: Initialised HMAC-SHA-256 client->server MAC algorithm 12:14:11 Trace: Initialised AES-256 SDCTR server->client encryption 12:14:11 Trace: Initialised HMAC-SHA-256 server->client MAC algorithm 12:14:12 Trace: Pageant is running. Requesting keys. 12:14:12 Trace: Pageant has 1 SSH-2 keys 12:14:12 Trace: Trying Pageant key #0 12:14:12 Trace: Server refused public key 12:14:12 Trace: Disconnected: No supported authentication methods available (server sent: publickey) 12:14:12 Error: Disconnected: No supported authentication methods available (server sent: publickey) 12:14:12 Trace: CControlSocket::DoClose(64) 12:14:12 Trace: CSftpControlSocket::ResetOperation(66) 12:14:12 Trace: CControlSocket::ResetOperation(66) 12:14:12 Error: Could not connect to server 12:14:12 Trace: CFileZillaEnginePrivate::ResetOperation(66)

Response: 150 opening data connection server sent unexpected reply and connection close errors.

Ubuntu Version: 14.10 FileZilla Version: 3.9.0.6

This is happening when I try to open a new tab. It overlays the current tabs. Also the tabs are not switchable in this case.

(prog-filezilla:13881): Gtk-CRITICAL **: IA__gtk_widget_set_size_request: assertion 'width >= -1' failed

(prog-filezilla:13881): Gtk-CRITICAL **: IA__gtk_widget_set_size_request: assertion 'height >= -1' failed

(prog-filezilla:13881): Gtk-CRITICAL **: IA__gtk_widget_set_size_request: assertion 'width >= -1' failed

(prog-filezilla:13881): Gtk-CRITICAL **: IA__gtk_widget_set_size_request: assertion 'width >= -1' failed

(prog-filezilla:13881): Gtk-CRITICAL **: IA__gtk_widget_set_size_request: assertion 'height >= -1' failed

(prog-filezilla:13881): Gtk-CRITICAL **: IA__gtk_widget_set_size_request: assertion 'width >= -1' failed
wxD-Bus: Signal from /org/freedesktop/DBus, member NameAcquired
wxD-Bus: Reply with serial 2
wxD-Bus: Reply to RegisterClient, our object path is /org/gnome/SessionManager/Client10
wxD-Bus: CPowerManagementInhibitor: Requesting busy
wxD-Bus: Reply with serial 3
wxD-Bus: Reply: Error: The name org.freedesktop.PowerManagement was not provided by any .service files
wxD-Bus: Falling back to org.gnome.SessionManager
wxD-Bus: CPowerManagementInhibitor: Requesting busy
wxD-Bus: Reply with serial 4
wxD-Bus: CPowerManagementInhibitor: Request successful, cookie is 176761874
wxD-Bus: CPowerManagementInhibitor: Requesting idle
13:36:34: Debug: Failed to connect to session manager: SESSION_MANAGER environment variable not defined
wxD-Bus: Reply with serial 5
wxD-Bus: CPowerManagementInhibitor: Request successful

(prog-filezilla:13881): Gtk-CRITICAL **: IA__gtk_widget_set_size_request: assertion 'width >= -1' failed

(prog-filezilla:13881): Gtk-CRITICAL **: IA__gtk_widget_set_size_request: assertion 'height >= -1' failed

(prog-filezilla:13881): Gtk-CRITICAL **: IA__gtk_widget_set_size_request: assertion 'width >= -1' failed

(prog-filezilla:13881): Gtk-CRITICAL **: IA__gtk_widget_set_size_request: assertion 'width >= -1' failed

(prog-filezilla:13881): Gtk-CRITICAL **: IA__gtk_widget_set_size_request: assertion 'height >= -1' failed

(prog-filezilla:13881): Gtk-CRITICAL **: IA__gtk_widget_set_size_request: assertion 'width >= -1' failed

(prog-filezilla:13881): Gdk-CRITICAL **: IA__gdk_window_thaw_updates: assertion 'impl_window->update_freeze_count > 0' failed

(prog-filezilla:13881): Gdk-CRITICAL **: IA__gdk_window_thaw_updates: assertion 'impl_window->update_freeze_count > 0' failed

(prog-filezilla:13881): Gdk-CRITICAL **: IA__gdk_window_thaw_updates: assertion 'impl_window->update_freeze_count > 0' failed

(prog-filezilla:13881): Gdk-CRITICAL **: IA__gdk_window_thaw_updates: assertion 'impl_window->update_freeze_count > 0' failed

(prog-filezilla:13881): Gdk-CRITICAL **: IA__gdk_window_thaw_updates: assertion 'impl_window->update_freeze_count > 0' failed

(prog-filezilla:13881): Gdk-CRITICAL **: IA__gdk_window_thaw_updates: assertion 'impl_window->update_freeze_count > 0' failed

(prog-filezilla:13881): Gdk-CRITICAL **: IA__gdk_window_thaw_updates: assertion 'impl_window->update_freeze_count > 0' failed

(prog-filezilla:13881): Gdk-CRITICAL **: IA__gdk_window_thaw_updates: assertion 'impl_window->update_freeze_count > 0' failed
wxD-Bus: CPowerManagementInhibitor: Requesting busy
wxD-Bus: Reply with serial 6
wxD-Bus: CPowerManagementInhibitor: Request successful, cookie is 1003446351
wxD-Bus: CPowerManagementInhibitor: Requesting idle
wxD-Bus: Reply with serial 7
wxD-Bus: CPowerManagementInhibitor: Request successful

My colleague got the same issue.

Ref: ​http://askubuntu.com/questions/551732/filezilla-tab-overlay-issue

The downloaded package from the The icon New Version available! button does not work!

When installed the following error appears: Unsupported operating system

WTF! I am only running the automatic autoupdater within the application already running in my system! and running the proposed package!

Your automatic updater does not work and does not verify in which system FileZilla client is running before proposing the package to run for the update.

Can I have a password and username for use filezilla

thanks.

When I drag a file from local site to the remote site it prompts me for action. I select overwrite like I always have. Filezilla shows the upload progression and status. It gets to 100% and the actions window pops up again. If you select overwrite, the whole process starts again. If you hit cancel, it does cancel, but the file is always incomplete and not upload fully.

If on the actions screen I choose "always do this" in addition to the overwrite. Filezilla will just keep going through the process over and over automatically. It will keep doing it with no end.

With some files, overwrite is confirmed but although the date of the file changes, the content does not. Also the file size remains the same.

When I use the Manage Bookmarks feature, the items are ordered case insensitively. When I close the Bookmark manager, I see that the bookmarks are ordered case sensitively. I think this should be standardized to case insensitive. When you have the time ;)

Filezilla client 3.9.0.6

v 3.9.0.6 run on OSX 10.10

when i "View/Edit" file with same file name, when i upload the last edited file it overwrite the first one.

details :

1. "View/Edit" on a file, (i use Brackets code editor).
2. edit that file, Save, and return back to FileZilla, it will display a message that file have been edited, upload that file.
3. navigate to other directory, find the same file name, "View/Edit" that file like in step 2. return back to fileZilla, upload it.

4 check the file, in my case the first edited file is overwrited by the last edited file. the last edited file is no chages.

i hope you understand. Thank you

I have successfully used Filezilla in the past with all the same settings. Since the last update I have not been able to retrieve the directory listings. I can access the FTP site via Windows Explorer and via browser with no issues. Tried Cute FTP which also worked well Below is the debug report from logging in. I am using an HP8560 FileZilla Client

Version: 3.10.0-beta2

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2014-12-05 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.20 SQLite: 3.8.7.2

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64 bit system

Status: Resolving address of ftp.xxxxxxx.com Status: Connecting to XX.XXX.XXX.37:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220 Welcome to the XXXX XXXXXXX FTP Site Trace: CFtpControlSocket::SendNextCommand() Command: AUTH TLS Trace: CFtpControlSocket::OnReceive() Response: 500 Protocol not supported. Trace: CFtpControlSocket::SendNextCommand() Command: AUTH SSL Trace: CFtpControlSocket::OnReceive() Response: 500 Protocol not supported. Status: Insecure server, it does not support FTP over TLS. Trace: CFtpControlSocket::SendNextCommand() Command: USER XXXXXXX Trace: CFtpControlSocket::OnReceive() Response: 331 Password required for XXXXXXX. Trace: CFtpControlSocket::SendNextCommand() Command: PASS * Trace: CFtpControlSocket::OnReceive() Response: 230 Status: Server does not support non-ASCII characters. Trace: CFtpControlSocket::SendNextCommand() Command: PBSZ 0 Trace: CFtpControlSocket::OnReceive() Response: 200 PBSZ Command OK. Protection buffer size set to 0. Trace: CFtpControlSocket::SendNextCommand() Command: PROT P Trace: CFtpControlSocket::OnReceive() Response: 200 PROT Command OK. Using Private data connection Status: Connected Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: Measured latency of 70 ms Status: Retrieving directory listing... Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/Usr/XXXXXX" is current folder. Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: TYPE I Trace: CFtpControlSocket::OnReceive() Response: 200 Type set to I. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (12,231,164,37,10,86). Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Command: MLSD Trace: CFtpControlSocket::OnReceive() Response: 150 Opening BINARY mode data connection for MLSD /Usr/alaurie. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: CTransferSocket::OnConnect Trace: CTlsSocket::Handshake() Trace: CTlsSocket::ContinueHandshake() Trace: CTlsSocket::ContinueHandshake() Trace: CTlsSocket::ContinueHandshake() Error: GnuTLS error -110: The TLS connection was non-properly terminated. Status: Server did not properly shut down TLS connection Trace: CTlsSocket::OnSocketEvent(): close event received Trace: CTransferSocket::OnClose(106) Error: Transfer connection interrupted: ECONNABORTED - Connection aborted Trace: CTransferSocket::TransferEnd(3) Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226 Transfer complete. 0 bytes transferred. 0 Bps. Trace: CFtpControlSocket::TransferParseResponse() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Trace: CFtpControlSocket::ParseSubcommandResult(2) Trace: CFtpControlSocket::ListSubcommandResult() Trace: CFtpControlSocket::ResetOperation(2) Trace: CControlSocket::ResetOperation(2) Error: Failed to retrieve directory listing

Hello. Here is the scenario. In the remote directoy the file that I want to download is being builded (an sql backup) and the size displayed for Filezilla Client is X. then when I note in the SSH terminal that the dump has been finished, I proceed to download with FileZilla client, and the issue here is that Filezilla uses the size of the file detected the last time reviewed, and not the final size (then an incorrect file size is displayed in the progress of the file that is being downloaded).

thanks for your attention.

Crash on load Problem signature:

Problem Event Name: APPCRASH Application Name: filezilla.exe Application Version: 3.10.0.0 Application Timestamp: 00000006 Fault Module Name: ntdll.dll Fault Module Version: 6.1.7601.18247 Fault Module Timestamp: 521ea8e7 Exception Code: c0000005 Exception Offset: 0002e3be OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 1033 Additional Information 1: 0a9e Additional Information 2: 0a9e372d3b4ad19135b953a78882e789 Additional Information 3: 0a9e Additional Information 4: 0a9e372d3b4ad19135b953a78882e789

i am using filezilla with porxy address of bsnl network.it deleting the part of file uploding.

those 3rd-party open source software offers during installation actually sometimes are malware. not sure what percentage. but I would avoid them all, a lot of them look pretty questionable in concept.

please remove the 3rd-party software installs and leave filezilla a plain filezilla (and safe from the 3rd-party malware we all have to avoid now).

In Ubuntu 14.10 if i connect to an ftp server and start renaming the files suddenly filezilla wont allow me to type anything. This bug dosent exist in Ubuntu 14.04 64 bit.

i use F2 to rename files and this is still possible to use. Also i can click in the name of a file and move the marker and mark text with the mouse, but i cant erase the names or type new text in the names. This happend very shortly after. If i connect to the ftp find a file and mark it for editing/renaming and go over in a browser or folder on my machine suddenly when i come back filezilla kinda freezes.. only thing to do is close filezilla and start it again and this happens everytime.. i cant even have filezilla open for 5 minutes and conencted..

Im running Ubuntu 64 bit and my local network is stable (Using lan cables and have transfer speeds on 100 MB/s (1000 Mbit)

I tried to debug filezilla, but the debug dosent catch anything related to what im doing.. (i will try to get some debug/logging that could be useful, but maby you just need to run Ubuntu 14.10 64 bit and rename files on your ftp.. when i enabled debug/logging it took longer time before it did freeze.

When clicking sitemanager icon this error is coming up, (see attached file)

My hard drive recently crashed and I had to do a factory reset to get back up and running. This also meant re-installing all the programs. (thanks to Carbonite for saving our data).

After re-installing FileZilla we're now experiencing black outs as the "Display Adapter Fails" then recovers. We also use HighTail and TeamViewer with no problems.

We're running a Dell quad processor machine with the standard "Intel(R) HD Graphics Family" on board video driver. The driver is current and up to date. We didn't have this problem before the crash so I can't be certain where the problem lies. My system checks out fine with all trouble shooting tools.

Bonjour,

Le raccourcis Ctrl-V pose souci car il ne fait pas de "coller".

Fort pénible

I am using Filezilla version 3.10.0-beta3. Avast free edition anti-virus(latest version 2015.10.0.2208) Windows 8.1 platform(up to date).

I have four websites to maintain. 3 hosted with '123reg' and 1 hosted with 'Compila' No problems with connecting and updating the 3 '123reg' hosted sites.

When accessing the Compila hosted site I get the following log:- Status: Resolving address of tondushooting.org.uk Status: Connecting to 195.238.172.213:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (195,238,172,213,142,195) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

The last time that I updated the Compila hosted site was 29th November 2014 so would have used version 3.9.0.6 at that time.

I reported the problem to 'support' at Compila and they could find nothing wrong and could access the servers with my website files on.

I have always updated to the latest Filezilla version and in this case have solved my problem by reverting to version 3.9.0.6 - all now works fine. There seems to be a possible bug with version 3.10.0.

I tried to fix this problem all over google. Some reason when ever I try to conenct to FileZilla my screen goes black for a good 5-10 seconds then I get a blue screen. I can't find any solution I downloaded multiple versions of FileZilla and nothing worked.

Windows 7 home premium Intel(R) Celeron(R) CPU G530 @ 2.40GHz 2.40 4 Ram

FileZilla crashes reproducibly when going to "Computer". It does not matter whether I select it from local directory tree or whether I go up in local file list from the root of a drive (by double-clicking "..").

Version: 3.10.0-rc1

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2014-12-29 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.20 SQLite: 3.8.7.2

Operating system:

Name: Windows 7 (build 7601, Service Pack 1) Version: 6.1 Platform: 32-bit system

I have a local server running Mac OSX Yosemite 10.10, connected to my Win7 Pro with the Windows "connect a network drive" functionality. I'm connecting filezilla on a distant ftp host using my Network Drive on OSX as "Local Site".

Before i upgrade my Mac OSX Server to Yosemite 10.10, no issue. But after Yosemite upgrade, i am sometimes not able to get the Mac OSX Network Drive files list.

After a lot of tries, i get was is causing this issue : when the directory has more than 100 elements inside, i can't get the file list. Less than 100 elements, no issue.

Since updating to version 3906 an error message often shows up during use or when closing the program.

If allowed, I will attach a picture of the message to show what is happening

Since updating to version 3906 an error message often shows up during use or when closing the program.

If allowed, I will attach a picture of the message to show what is happening.

Cheers David

info@…

Estonian language is widely spoken only in Estonia. Please rename locales/et_EE.po to locales/et.po

Also, FileZilla rocks!

Total crash, I just installed the update from Beta 2 to rc1 and it crashes instantly... there isn't much to tell I even tried passing it through GNU debugger but it did have anything usable without debugging symbols...

Fault bucket 753968117, type 17

Faulting application name: filezilla.exe, 
version: 3.10.0.0, 
time stamp: 0x00000006

Faulting module name: filezilla.exe, 
version: 3.10.0.0, 
time stamp: 0x00000006

Exception code: 0xc0000005
Fault offset: 0x009c4d87
Faulting process id: 0xdb8
Faulting application start time: 0x01d026edf8cbe7ad

Faulting application path: 
C:\Program Files (x86)\FileZilla\filezilla.exe

Faulting module path: 
C:\Program Files (x86)\FileZilla\filezilla.exe

Report Id: 46d125af-92e1-11e4-afcd-001e33825849

Program received signal SIGSEGV, Segmentation fault.

0x00dc4d87 in ?? ()

(gdb) bt
#0  0x00dc4d87 in ?? ()
#1  0x004a5b1a in ?? ()
#2  0x004a66b8 in ?? ()
#3  0x005a115b in ?? ()

[Inferior 1 (process 3512) exited with code 030000000005]

I am attaching the windows Error report file its a txt file so any text editor should be able to read it...

but... WinDbg is helpful O_o

(47c.228): Break instruction exception - code 80000003 (first chance)

I take it you forgot to remove a break point lol.... O_o

Since 3.10.0-rc1, every time I upload an existing file, it asks me, for EVERY file, what I want to do (overwrite, etc).

Even if I put "Always use this action", it will keep asking me for every file.

In settings, the "File Exists action" is always to overwrite.

Didn't happen in previous versions. Is still happening in 3.10.0-rc2.

I have Filezilla 3.9.0.5 x64, but the automated update installed 3.9.0.6 x86. Also my current version (3.9.0.5 x64) won't be uninstalled during the update process.

If I select "Always use this action" checkbox, it is not remembered. Next time I upload the same file the checkbox is unchecked.

FileZilla Client

Version: 3.10.0-rc2

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-01-03 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.20 SQLite: 3.8.7.2

Operating system:

Name: Windows 8.1 (build 9600), 64-bit edition Version: 6.3 Platform: 64-bit system

Message -> "The server's certificate is unknown" with version "FileZilla_3.10.0-rc2_win32-setup.exe". It works okay using version "FileZilla_3.9.0.6_win32-setup.exe"

Could you please provide me with the DNS zone file for "citizensfsb.com"?

Thank you!

Todd O'Donnell AVP Compliance Officer Citizens Savings and Loan Leavenworth, KS 66048 (913) 250-3349

Hi, When browsing on my local site in FileZilla, I could not find all of my folders. If I wrote the address to the folder manually then it would work. It turns out, the folders I have changed the Icon for dont appear, and if I remove the icon the appear again.

I just upgraded to the latest filezilla version and it's broken.

When I log on to a server now it errors out trying to list the directory. If I uninstall this version and re-install 3.9.06, it works fine.

Regards, Bob

About screen info:

FileZilla Client

Version: 3.10.0

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-01-07 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.20 SQLite: 3.8.7.2

Operating system:

Name: Windows 8.1 (build 9600), 64-bit edition Version: 6.3 Platform: 64-bit system

Hey, guys. I use Filezilla regularly, no issues and love it..until today. After installing your latest update, any attempts to connect to my file share result in it hanging after MLSD when it returns two errors:

Connection timed out Failed to retrieve directory listing

*please* fix this. Appreciate your time.

Craig

I just updated Filezilla to the latest version and since then it has not been possible to fully connect to my FTP server.

Here is a copy of the log window:

Status: Resolving address of 31.193.5.45.srvlist.ukfast.net Status: Connecting to 31.193.5.45:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (31,193,5,45,236,233). Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

I have been using FTP daily until performing the upgrade.

Here is the current About Page:

FileZilla Client

Version: 3.10.0

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-01-07 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.20 SQLite: 3.8.7.2

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

i just updated Filezilla 3.10.0 and now none of my 20 or so website will download any files, it keeps timing out.

I'f there is no quick fix can i some how roll back to the last version?

It won't be anything my end ass my websites are with many different servers and i am a long term user of Filezilla

Today when I launched Filezilla it asked me to update it. After the upgrade to new version I got error connecting to the ftp server. I checked with other people and they have no problem connecting . Filezilla version is 6.1. 2015-01-07. I attached the complete error messages to this ticket. Please advice.

Something is amiss with the latest release 3.10.0 of FileZilla. I have always downloaded and installed the latest version. Today when I did that, FileZilla stopped working. Can you let me know the fix, or point me to somewhere that I can download the previous version? I am still running the previous version on my backup laptop, and FileZilla works on that one. Server has not changed. Only FileZilla has changed, and this is the result:

Status: Resolving address of www.k9tag.com Status: Connecting to 23.246.197.178:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (23,246,197,178,63,49) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

After upgrading to the latest release, I am now presented with a Unknown certificate dialog window. The 'Always trust certificate in future sessions' is disabled and cannot be selected.

Although I connect to the requested site by just clicking OK on the dialog page, transfers fail with a response message of: 550 The supplied message is incomplete. The signature was not verified.

Prior to upgrade, I was able to connect and ftp files to the requested site without problems.

I tried un-installing and then installing the latest release, but still have the same problem.

Thanks for a great product. I hope you can help me resolve my issue.

Pat

After installing v3.10.0, every file upload attempt fails with "Could not start transfer".

Hello I downloaded the latest FTB your client and tried to link to my friend's FTP, and he does not care. The server has certified but is not valid, that is, when I go into my friend's panel appears the "https" in red. Try to fix this if I have to go back to the old version.

I use public key authentication for sftp. When files are transferred with FileZilla Client 3.10.0 file permission are not being set properly. They are being set to 000. Previous versions handled the permissions correctly.

FileZilla Client

Version: 3.10.0

Build information:

Compiled for: i386-apple-darwin13.2.0 Compiled on: i386-apple-darwin13.2.0 Build date: 2015-01-07 Compiled with: Apple LLVM version 6.0 (clang-600.0.56) (based on LLVM 3.5svn) Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.20 SQLite: 3.8.6

Operating system:

Name: Mac OS X (Darwin 14.0.0 x86_64) Version: 10.10

installed 3.10.0 - can't log onto ftp sites. Give me access to previous build!

Error: The data connection could not be established: ECONNREFUSED - Connection refused by server Error: Connection timed out Error: Failed to retrieve directory listing

FileZilla Client

Version: 3.10.0

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-01-07 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.20 SQLite: 3.8.7.2

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

Version 3.9.0.6 .has been working just fine. I updated to version 3.10 on my desktop iMac (about 1 year old). Now when I connect to my ftp site using Site Manager nothing happens on the right hand side - it simply says Not connected to any server, If try again using Site Manager I get "FileZilla is already connected".

I've gone back to the previous version so I am able to keep working.

Thank you for your support for this fine product.

With the new update, the program started to show security certificate warnings and couldn't connect to the server. (It tries but times out.)

No idea what is causing it, pretty sure it is introduced with the last release though.

The previous version still (3.9.0.6) works great, you get it by using the link below: ​http://sourceforge.net/projects/filezilla/files/FileZilla_Client/3.9.0.6/

Status: Resolving address of ftp.bodingh.se Status: Connecting to 62.20.1.132:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Error: GnuTLS error -12: A TLS fatal alert has been received. Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of ftp.bodingh.se Status: Connecting to 62.20.1.132:21... Status: Connection established, waiting for welcome message... Response: 220 FTP service Command: AUTH TLS Response: 234 Proceed with negotiation. Status: Initializing TLS... Error: GnuTLS error -12: A TLS fatal alert has been received. Error: Could not connect to server

Problem is with 3.10.0 Version 3.9.0.6 works fine, see below:

Status: Connecting to 62.20.1.132:21... Status: Connection established, waiting for welcome message... Response: 220 FTP service Command: USER d3854 Response: 331 Please specify the password. Command: PASS Response: 230 Login successful. Command: SYST Response: 215 UNIX Type: L8 Command: FEAT Response: 211-Features: Response: AUTH SSL Response: AUTH TLS Response: EPRT Response: EPSV Response: MDTM Response: PASV Response: PBSZ Response: PROT Response: REST STREAM Response: SIZE Response: TVFS Response: UTF8 Response: 211 End Command: OPTS UTF8 ON Response: 200 Always in UTF8 mode. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" Command: TYPE I Response: 200 Switching to Binary mode. Command: PASV Response: 227 Entering Passive Mode (62,20,1,132,192,221). Command: LIST Response: 150 Here comes the directory listing. Response: 226 Directory send OK. Status: Directory listing successful

yesterday I got the update 3.10.0-rc1, and every time I try to upload a file the program start the uploading, then finish the uploading, then start the uploading again, the file never appear in the screen.

please can you help me, is crucial to upload this file today

best regards

I'm getting what this user is getting in ticket #9737 (​http://trac.filezilla-project.org/ticket/9737), except I have upgraded to 3.10.0. Please advise. Thanks!

around version 3.10.0, Encryption on all Site Manager connections get reset on the upgrade to Use explicit FTP over TLS if available. it's a real pain to put them back on 200 entries one by one. I begin to wonder if somehow the setting in the XML file got globally set to this new value or the encryption setting simply got ignored due to a bug either in reading or writing the xml file.

if I change the entry, it stays changed, so I am guessing it only happened during the upgrade process.

strangely enough, I looked through the sitemanager.xml file, and nowhere do I see my Encryption type saved. so I guess it got dropped from some previous or current version. edited sample: <Server>

<Host>192.168.1.1</Host> <Port>21</Port> <Protocol>0</Protocol> <Type>0</Type> <User>JOE PALOOKA</User> <Pass>ABCDEF</Pass> <Logontype>1</Logontype> <TimezoneOffset>0</TimezoneOffset> <PasvMode>MODE_ACTIVE</PasvMode> <MaximumMultipleConnections>0</MaximumMultipleConnections> <EncodingType>Auto</EncodingType> <BypassProxy>0</BypassProxy> <Name>jim 2</Name> <Comments /> <LocalDir /> <RemoteDir /> <SyncBrowsing>0</SyncBrowsing>jim 2

</Server>

I am getting recurring file open errors for local files that have been opened once already.

I was not getting these in the prior version.

A screen excerpt with the error is attached.

Cannot connect with quick connect, always timeout. In site Manager, I can connect but everytime must enter password even the remember password box is check. This problem only happens with this new version. How to correct?

Since many month I can´t update my FileZilla. Whats wrong?

08:39:22: XRC error: XRC resource "ID_MENUBAR" (class "wxMenuBar") not found 08:39:22: XRC error: XRC resource "ID_TOOLBAR" (class "wxToolBar") not found 08:39:22: Werkzeugleiste kann nicht aus Ressourcendatei geladen werden 08:39:22: XRC error: XRC resource "ID_QUICKCONNECTBAR" (class "wxPanel") not found 08:39:22: Quickconnect-Leiste kann nicht aus Ressourcendatei geladen werden 08:39:23: XRC error: XRC resource "ID_WELCOME" (class "wxDialog") not found

To any ftp server.

Since the new update recently I am having serious issues with connecting and dropping out while transferring files to hosting server. If and when it does connect it fails after attempting to enter any other folders.

Error: Connection timed out Error: Failed to retrieve directory listing Response: 421 Too many connections (8) from this IP Error: Could not connect to server

I have already been in contact with my hosting service and everything is working there.

Can you tell me how long a fix will be done and a new update as I need to upload within the next 72 hours client files to server.

Kind regards.

Since the new update recently I am having serious issues with connecting and dropping out while transferring files to hosting server. If and when it does connect it fails after attempting to enter any other folders.

Error: Connection timed out Error: Failed to retrieve directory listing Response: 421 Too many connections (8) from this IP Error: Could not connect to server

I have already been in contact with my hosting service and everything is working there.

Can you tell me how long a fix will be done and a new update as I need to upload within the next 72 hours client files to server.

Kind regards.

Status: Connecting to 68.232.178.230:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Command: USER 1047881 Response: 331 Username ok, send password. Command: PASS * Response: 530 Invalid user Error: Critical error: Could not connect to server

it has been since the update.i am new at this please help or advised how to fix i went as far as unistall and clean install.no luck

Hello,

After upgrading to the latest version of Filezilla, 3.10.0, it no longer allows me to download or edit files on servers.

The status claims success: Status: File transfer successful, transferred 1,017 bytes in 1 second

This behavior happens regardless of how I download the file (right click download, drag & drop, right click and "edit")

When I drag and drop, it appears in the target folder briefly, but disappears.

Up to this morning I have had no difficulties with Filezilla either when uploading or downloading to a site I have been using for year. This morning I updated Filezilla. Immediately I had a popup notice informing me that the licence to this site was not recognised. The notice allowed me to override this. However, I noticed that the check box allowing me to indicate that this site can be trusted in future had not been enabled.

The site I am trying to connect to is run by Freeola.com, and I was attempting a connection to vip4.freeola.net.

This is the log of the attempted connection:-

Status: Resolving address of vip4.freeola.net Status: Connecting to 193.0.158.4:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (193,0,158,4,182,147) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing.

I have included an attachment which is the licence warning I received on a pop up screen.

I am concerned that up to noon today I was able to use your software to connect to this site, as I have been doing for several years, and then with the 'improved' update it is now effectively useless to me.

I've just updated to the latest version of FileZilla. Now it times out everytime and I have been unable to do a successful upload. I know it's the version of FileZilla at fault, because I then tried again, on my laptop, with the previous version still installed and succeeded without any problem at all. Here is the sequence showing where it times out:- Status: Resolving address of hannahmarco.co.uk Status: Connecting to 173.254.28.74:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (173,254,28,74,81,14) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

Status: Resolving address of ftp Status: Connecting to .... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate...

This version of Filezilla is telling me "Unknown sertificate" on remote server

Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing of "/public_html"...

hangs here for like 10-15 secs

Command: CWD /public_html Response: 250 OK. Current directory is /public_html Command: PWD Response: 257 "/public_html" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (212,125,204,217,125,118) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

It stops here..

FileZilla Client

Version: 3.10.0

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-01-07 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.20 SQLite: 3.8.7.2

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

Previous version worked fine, then desided to upgrade after having done my transfers, and it is now borked. In advance, Thanks for fixing.

Since I upgraded to the latest version, I can no longer access my FTP site. It says:

Status: Resolving address of ftp.XXXX.com Status: Connecting to XX.XXX.XXX.XXX:XX... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing of "/public_html/XXXX/XXXXX"... Command: CWD /public_html/ Response: 250 OK. Current directory is /public_html/XXXX/XXXXX Command: PWD Response: 257 "/public_html/XXXX/XXXXX" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (XX,XXX,XXX,XXX,XXX,XX) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

Resolving address of ftp.keandf.com Status: Connecting to 74.220.207.155:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (74,220,207,155,111,227) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing Status: Resolving address of ftp.keandf.com Status: Connecting to 74.220.207.155:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (74,220,207,155,93,18) Command: MLSD Error: The data connection could not be established: ETIMEDOUT - Connection attempt timed out Error: Connection timed out Error: Failed to retrieve directory listing

Receiving the current error message after update. Also had another message advising that the certificate was unknown. I overrided this and selected always trust for future sessions, but I don't think this helped.

Please advise a solution.

Status: Resolving address of majestixmedia.com.au Status: Connecting to 112.140.176.160:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (112,140,176,160,16,41) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing