Custom Query (4044 matches)

We all get the message "critical error" "could not connect to server" Have the newest version. What is the problem? Chuck

Filezilla version: 3.5.3

I am connecting to two server over LAN. When I queue and process file downloads from both servers concurrently in a FZ client session, the client freezes and must be force-closed.

The servers are slightly unusual in that they are embedded servers in Topcon GPS receivers. The server software enforces a strict limit of one connection per receiver. I have configured this limitation in the Site Manager (Limit Number of Simultaneous Connections = 1).

If a subsequent connection is attempted, the receiver will return a 530 error message and disconnect. This behavior has been observed using Topcon NetG3A receivers as well as Topcon GB1000.

I have tried this using multiple client PCs (Asus netbooks, Dell desktops, laptops) using various operating systems from Vista to XP to Windows 7.

By contrast, if I open two separate filezilla client instances, and start a concurrent queue of downloads in each of these separate filezilla instances, the downloads work just fine. So this seems to point to some kind of race condition, or perhaps a connection isn't getting closed in the right order, when downloading within the same filezilla instance.

Toolbar disappears after site connection.. I toggle "Toolbar" and it reappears..

FileZilla Client

Version: 3.5.3 Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2012-01-08 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 2.10.4

Operating system:

Name: Windows NT 6.1 (build 7601, Service Pack 1) Version: 6.1 Platform: 64 bit system

• -

After 2 days of repairing a hacking attack to some of my Internet-Domains I found out that filezilla stores my passwords in plain text by default. So I try to avoid this for future now. I found out that there is a Setting "Kiosk Mode" to control this behaviour. But when I try to set Kiosk Mode to 1 or 2 instead of 0, my Client seems to ignore this setting. I uninstalled the old version of Filezilla. I installed the current version Filezilla 3.5.3 from scratch Same behaviour.

Do you have any idea, what I could do else to make working my filezilla-client installation accepting my overridings of the default-settings (especially this hacker-friendly password-default-option) by using my fzdefaults.xml, which I located in .../Documents and Settings/<username>/Application Data/Filezilla/ ?

See the content of my fzdefaults.xml below or the full file in attachment ... <FileZilla3>

<Settings>

<Setting name="Config Location">$SOMEDIR/filezilla/</Setting> <Setting name="Kiosk mode">2</Setting> <Setting name="Disable update check">0</Setting>

</Settings> <Servers>

<Server>

<Host>ftp.gnu.org</Host> <Port>21</Port> <Protocol>0</Protocol> <Type>0</Type> <Logontype>0</Logontype> <User>anonymous</User> <Pass>someone@…</Pass> <TimezoneOffset>0</TimezoneOffset> <PasvMode>MODE_DEFAULT</PasvMode> <MaximumMultipleConnections>0</MaximumMultipleConnections> <EncodingType>Auto</EncodingType> <Comments></Comments> <LocalDir></LocalDir> <RemoteDir></RemoteDir>Primary GNU download server

</Server>

</Servers>

</FileZilla3>

Like other users, I cannot delete files using a Mac. "Files" are files added from the left hand part of the FileZilla screen (which shows my folders and my desktop, including all the files I want to build into the website) by dragging and dropping them into the right hand part of the screen after I've chosen the specific place I want to save them (in my case, a file called "NewTest" in "Public HTML". (FileZilla doesn't give this screen a name; it's the one that has username, password, and port on the top.)

In the course of the project, we have uploaded various files from preliminary versions of the website we're building. They have served their purpose, and leaving them on the system will now cause only chaos and confusion. So they need to be deleted, and then replaced by newer files.

Now, I am working with a html/web guru who uses a Windows machine, and she deletes files from FileZilla very easily, by highlighting them and pressing the delete key.

That, however, does NOT work with my Mac (a MacBook Pro running MacOS 10.5.8) and a Safari browser. At this URL

​http://forum.filezilla-project.org/viewtopic.php?f=2&t=12541&hilit=deleting+files

another Filezilla user reports the same problem with their Mac, and their experience is the same as my own. In fact, I ran down the same list of possibiliities and workarounds, and none of them work.

Highlighting and pressing delete does NOT delete FileZilla files with a Mac.

1. Can you tell me how to delete files using a Mac?
2. I will have to migrate to another company if FileZilla can't solve the problem. Of course, I'd rather not do that, but we can't work with a non-functional server.

Timothy Perper perpcorn@… (I am a paying customer -- we've paid FileZilla for website access,)

Status: Connecting to 207.191.225.160:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 6 of 50 allowed. Response: 220-Local time is now 17:47. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER propertyupload@… Response: 331 User propertyupload@… OK. Password required Command: PASS Response: 230 OK. Current restricted directory is / Command: SYST Response: 215 UNIX Type: L8 Command: FEAT Response: 211-Extensions supported: Response: EPRT Response: IDLE Response: MDTM Response: SIZE Response: MFMT Response: REST STREAM Response: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; Response: MLSD Response: AUTH TLS Response: PBSZ Response: PROT Response: ESTA Response: PASV Response: EPSV Response: SPSV Response: ESTP Response: 211 End. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (207,191,225,160,18,31) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing Status: Connecting to 207.191.225.160:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 7 of 50 allowed. Response: 220-Local time is now 17:48. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER investin Response: 331 User investin OK. Password required Command: PASS Response: 230 OK. Current restricted directory is / Command: SYST Response: 215 UNIX Type: L8 Command: FEAT Response: 211-Extensions supported: Response: EPRT Response: IDLE Response: MDTM Response: SIZE Response: MFMT Response: REST STREAM Response: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; Response: MLSD Response: AUTH TLS Response: PBSZ Response: PROT Response: ESTA Response: PASV Response: EPSV Response: SPSV Response: ESTP Response: 211 End. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (207,191,225,160,115,220) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing Status: Connecting to 207.191.225.160:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 7 of 50 allowed. Response: 220-Local time is now 17:49. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER investin Response: 331 User investin OK. Password required Command: PASS Response: 230 OK. Current restricted directory is / Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (207,191,225,160,167,184) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

I am a total noob, please help, Filezilla was setup for me and I have used it without problems for some months.

I followed a promp to upgrade to 3.5.3 from 3.5.2, As it said none of my settings would be altered I thought it would be fine.

Now when i go to log onto a server I get an error saying.....

Status: Initializing TLS... Error: GnuTLS error -12: A TLS fatal alert has been received. Error: Could not connect to server

I have found my settings for the server, port, port, login, password etc and they are all fine.

PLEASE HELP!!!!!

I've updated a local file and even after hitting f5, right click and 'refresh' and closing and reopening filezilla, it's caching the old version of the file. I've checked in file explorer and it's seeing the new version, but filezilla is trapped in the past!

The only way I can upload my new file is to save it in a different location on my harddrive and then upload it.

version: 3.5.3

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2012-01-08 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Annoyance level bug. I connect from a machine in PDT Timezone, to a server (Linux, CentOS) in same PDT Timezone. FileZilla shows my times are an hour different. Both machines report they are PDT. For some reason, I can see at the beginning of the session this calculation (which is wrong):

Status: Calculating timezone offset of server... Command: mtime "alp3" Response: 1330985224 Status: Timezone offsets: Server: -28800 seconds. Local: -25200 seconds. Difference: 3600 seconds.

My Windows 7 Professional machine clearly states it is PDT, as well my Linux server reports the same.

File transfer was not a problem except for my webpage displaying Asian characters instead of the proper text and links.

When I test to connect to the server it writes : Host does not exist AND Can not connect to server

But why ? is it a bug ?

With FileZilla 3.5.3, I can't download a file with 0 bytes.

Messages/Logs:

Statut : Résolution de l'adresse de xxx.yyy.fr Statut : Connexion à aaa.bb.cc.d:21... Statut : Connexion établie, attente du message d'accueil... Réponse : 220 Serveur de mise a jour des pages perso AAA version [Apr 27 2011 11:43:55] Commande : USER login Réponse : 331 Password required for login. Commande : PASS Réponse : 230 User login logged in. Statut : Connecté Statut : Démarrage du téléchargement de /site-v1/Flash/wordpress/wp-includes/js/codepress/engines/older.js Commande : CWD /site-v1/Flash/wordpress/wp-includes/js/codepress/engines Réponse : 250 CWD command successful. Commande : TYPE A Réponse : 200 Type set to A Commande : PASV Réponse : 227 Entering Passive Mode (aaa,bb,cc,d,96,169). Commande : RETR older.js Réponse : 150 Opening ASCII mode data connection for older.js Réponse : 226 Transfer complete. Erreur : Délai d'attente expiré Erreur : Echec du transfert du fichier

It works good with "Allway Sync" .

Generally happy with FZ (3.5.3) but I get random corruptions on upload of PHP files to server - and then even if I delete the server file and re-upload it is still corrupt. Using another technique - eg uploading via the server's cPanel File Manager - and it works OK

After no problems for years using FZ daily, over the past 2 weeks I've had consistent problems downloading files using SFTP/SSH from my shared hostgator server. During batch downloading, it always downloads a few files, then posts the "software causing abort" (or words to that effect) during about the 4th file.

Happens every time now over past 2 weeks. Never happened in the past.

If the setting for Connection/Generic Proxy/Proxy Host has a trailing space, FileZilla does not connect. Similar to #1054.

Failure log:

Status: Connecting to example.net... Response: fzSftp started Command: proxy 1 "proxy.example.com " 3128 Command: open "user@…" 22 Error: ssh_init: Proxy error: Unable to resolve proxy host name Error: Could not connect to server

Working once proxy name fixed:

Status: Connecting to example.net... Response: fzSftp started Command: proxy 1 "proxy.example.com" 3128 Command: open "user@…" 22 Command: Trust new Hostkey: Once Command: Pass: Status: Connected to example.net

Of course there may be other parameters as well that don't strip trailing spaces. It's a minor issue, but took quite a while to diagnose.

File is not visible

File name: .~lock.Längen für Kupfer-LAN Kabel.ods# File size: 168 Bytes This temporary file is generated while using OpenOffice.org File attributes: only the archive bit is set. The file is not locked and it is displayed in the GUI of the server as well as in other file explorer when the memory is moved from the server to a computer. With FileZilla the folder that contents the not shown file can not be deleted but the folder can be moved including the invisible file. After moving the folder the file is still invisible in FileZilla.

FileZilla Client: 3.5.3 (2012-01-08)   OS: 3 Registered Windows XP Prof., Version 2002, Service Pack 3 Hardware: 3 different computer with AMD and Intel CPU   FTP server: Fonera 2.0 N Memory: FAT32

I am using FileZila, I was working and I just disconnect it, and again reconnect, this time it is giving me an error Connection timed out and Could not connect to server.

Status: Resolving address of ftp.edenparkgems.com Status: Connecting to 174.120.189.222:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 7 of 50 allowed. Response: 220-Local time is now 19:09. Server port: 21. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER edenpark Response: 331 User edenpark OK. Password required Command: PASS Error: Connection timed out Error: Could not connect to server

Please help me.

Hi,

FileZilla Client

Version: 3.5.3

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2012-01-08 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 2.10.4

Operating system:

Name: Windows NT 6.1 (build 7601, Service Pack 1) Version: 6.1 Platform: 64 bit system

Statut : Connexion à 192.168.1.100:21... Statut : Connexion établie, attente du message d'accueil... Réponse : 220-FTPSERVE IBM VM Level 540 at PHOENIX.dassault-aviation.co, 14:27:57 EDT SATURDAY 2012-09-08 Réponse : 220 Connection will close if idle for more than 5 minutes. Commande : USER anonymou Réponse : 230 ANONYMOU logged in; working directory = /../VMBFS:DWSYS:ANONYMOU/ Statut : Connecté Statut : Récupération du contenu du dossier... Commande : PWD Réponse : 257 "/../VMBFS:DWSYS:ANONYMOU/" is working directory Erreur : Impossible d'analyser le chemin retourné. Erreur : Impossible de récupérer le contenu du dossier

With a previous version of filezilla we have at work, I can do what I want. Now with this one from home I can't... The deal is to send windows files to a z/VM mainframe. The target is BFS file architecture.

Able to test/send anything you ask me.

Regards Alain

Folder on a FTP Server with äöü/ÄÖÜ (German umlaut) in Foldername aren't shown on FileZilla Client 3.5.3 for Mac. I tried the Windows FileZilla Client 3.5.3 and recognized, that there is no bug. It Is only a Bug at the Mac Version 3.5.3.

Hi FileZilla:

I've been trying to get FileZilla (v.3.5.3) through to tripod.com in order to upload my files to my website located there (​http://australianart.tripod.com/). Tripod assert, over and over, that they can ftp access my website without any problems from their end. However I cannot access my website and have been trying for over 3 weeks now without success and always with the below-listed error message:

Status: Resolving address of ftp.tripod.com Status: Connecting to 209.202.252.54:21... Status: Connection established, waiting for welcome message... Response: 220 Welcome to Tripod us FTP. Command: USER australianart Response: 331 Username set to australianart . Now enter your password. Command: PASS Response: 501 Please verify your Password Error: Critical error Error: Could not connect to server

I wonder if you have any ideas as to what the problem might be? I can ftp access all my other sites (around 6 of them) without any issues.

Regards, Murray Thompson (an otherwise very happy FileZilla user)

I was trying to upload photos from my PC and when I finish I cant open my website,show me this message

Warning: Division by zero in /home/rainbiz/public_html/files/rotateimage.php on line 0

I want to know if this is a problem with FileZilla or no?

Thanks

Hi, we have been using Filezilla FTP for 12 mths with no problems. It was last used successfully Tues 18 September to upload my bridge club Mornington BC results. I have not been able to connect since then, despite repeated attempts. We have the latest version of Filezilla. Can you help? I have attached a phot of the screen with the error.

I am trying to connect to an sFTP Server and download a file that is 155,515 bytes. It fails after 32,768 bytes and disconnects from the server.

I am using FileZilla 3.53 on Windows NT Operating System. FileZilla Client

Version: 3.5.3

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2012-01-08 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 2.10.4

Operating system:

Name: Windows XP (build 2600, Service Pack 3) Version: 5.1 Platform: 32 bit system

From another computer Running Windows 7, I am able to download the file successfully.

FileZilla Client

Version: 3.5.3

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2012-01-08 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 2.10.4

Operating system:

Name: Windows XP (build 7601, Service Pack 1) Version: 6.1 Platform: 64 bit system

Just wodnering how I can get the Windows XP Computer to Function Properly. (this isn't just happening for me, many users trying to connect to our systems are having the same issue).

Feel free to contact me at (312) 444-3848 or at kw97@… if you need further information or if you would like to discuss.

Thank You, Kim

I am trying to connect to an sFTP Server and download a file that is 155,515 bytes. It fails after 32,768 bytes and disconnects from the server.

I am using FileZilla 3.53 on Windows NT Operating System. FileZilla Client

Version: 3.5.3

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2012-01-08 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 2.10.4

Operating system:

Name: Windows XP (build 2600, Service Pack 3) Version: 5.1 Platform: 32 bit system

From another computer Running Windows 7, I am able to download the file successfully.

FileZilla Client

Version: 3.5.3

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2012-01-08 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 2.10.4

Operating system:

Name: Windows XP (build 7601, Service Pack 1) Version: 6.1 Platform: 64 bit system

Just wodnering how I can get the Windows XP Computer to Function Properly. (this isn't just happening for me, many users trying to connect to our systems are having the same issue).

Feel free to contact me at (312) 444-3848 or at kw97@… if you need further information or if you would like to discuss.

Thank You, Kim

I have noticed that I cannot depend upon Filezilla to upload files reliably. I just spent an hour with GoDaddy technical support to discover that even though my FileZilla upload screen showed (RH panel)that files were being uploaded, that they were in fact noton the destination server.

I verified this with GoDaddy's FTP program and also the CoffeeCup FTP program

When a folder has more than 10,000 files FileZilla count and list them to 9,998 files after that file are not counted and showed.

I've facing problem like connection refused by server from downloaded filezilla client..... Filezilla is essentially for my day to day work activities to be get ftp download/upload file from ISP server...

as per below error is coming since download, kindly give support to me to clear this issues ...

Status: Waiting to retry... Status: Connecting to 218.248.255.137:21... Status: Connection attempt failed with "ECONNREFUSED - Connection refused by server". Error: Could not connect to server

Expecting valuable feedback from technical/exp people....

Can't download an empty file from the FTP server to my local computer. Using Filezilla 3.5.3

Hi

I have a ftp server (vsftpd) on a Amazon Web Services EC2 virtual machine in a production environment. It's behind a Load Balancer, I access it using filezilla in passive mode for datas (vsftpd is configured to give the direct ip instead of using the load balancer for datas). Data and control channel thus have different ips. I use classic ftp (no ssl or whatever).

After exactly 60 seconds of transfer (upload or download, juste big enough to last more than 60seconds) i get a "server closed connection" error, for any version of filezilla (>=3) that didnt segfault i tried. But VSFTPD never actually closed the connection...

I looked into filezilla source code, the problem seems to come around in src/engine/ftpcontrolsocket.cpp. There is a control that seems to provoke the bug in CFtpControlSocket::OnReceive... By commenting it the problem disappear

if (!read)

{

LogMessage(::Error, _("Connection closed by server")); DoClose(); <= there i commented return;

}

the transfers stall a few seconds in the end of the transfer (it might be this test purpose) but i dont lose my connexion and the file transfered is ok.

Without the ELB (using the same ip for control and data) i dont get the initial problem.

I dont think this a good fix, but it does fix the problem for me.

User name u501037784 FAILED attempt TO UPLOAD FILES to host 31.170.166.105

Error message: Command: STOR Crisis.html Reply: 552 Disk full - please upload later

src/interface/resources/filezilla.svg not included in the source tarball for 3.6.0-beta1

Hello. when i open a ftp and make the program idle for a minute or so, then it cant refresh, edit, delete, rename the files(but it accepts new uploads!). it says a command (for exapmle): CWD myfolder

and freezes. i have to re-login to website to be able to continue working with my ftp. i have changed options from preferences (made the disconnect period 1000 minutes), but it doesnt work.

Usage of german (öäü) umlauts in proxy user passwords produce an error in FileZilla. If the proxy user password contains such umlauts a "normal" could not connect message is shown.

If the proxy user password doesn't contain umlauts it works normally again.

FileZilla Version: 3.5.3

Filezilla 3.5.3.

When downloading a file using SFTP, the EOF is not handled properly.

Example: downloading a 1564 bytes file.

• stat: server returns size 1564
• open
• read offset 0, len 32768: server returns 1564 data (as expected)

Now starts the stuff I think is not correct:

• read offset 32768, 32768: server returns EOF (issue 1: offset should be 1564, issue 2: the transfer should stop here)

And now keeps going up to 1 MB:

• read offset 65536, 32768: server returns EOF
• read offset 98304, 32768: server returns EOF
• ...
• read offset 1048576, 32768: server returns EOF
• close

About issue 1, I haven't found where's the problem. The offset of the request should always be adjusted to rr->retlen.

About issue 2, checking trunk/src/putty/sftp.c:1259, in xfer_download_gotpkt:

1273 	if ((rr->retlen < 0 && fxp_error_type()==SSH_FX_EOF) || rr->retlen == 0) {
1274 	xfer->eof = TRUE;
1275 	rr->complete = -1;
1276 	#ifdef DEBUG_DOWNLOAD
1277 	printf("setting eof\n");
1278 	#endif
1279 	} else if (rr->retlen < 0) {
1280 	/* some error other than EOF; signal it back to caller */
1281 	xfer_set_error(xfer);
1282 	rr->complete = -1;
1283 	return -1;
1284 	}
1285 	
1286 	rr->complete = 1;

So rr->complete is set to -1 when EOF is detected, but then that it's ignored and set to 1. I believe a return 1 is missing after setting complete to -1.

TECHNICAL INFORMATION FTP Server: Windows server 2003 R2 x86 Client operating system: Windows 7 x64 File Zilla: 3.5.3, Build date: 2012-01-08 Server and client filesystem: NTFS Connection: VPN tunnel using native windows client to ISA 2006 server running on Windows 2003 R2 x86 with shared key L2TPipsec connection. FileZilla set to transfer binary file.

FILE INFORMATION File type: VMware vmdk file. Server side size using Windows Explorer: 2,687,200 KB Server side size using Windows 7 native FTP client: 2,751,692,288 Server side using filezilla: 2,751,692,288

TRANSFER INFORMATION: Size of transferred file using filezilla interface: 4,636,080,127 Size of transferred file using Windows cmd: same

DESCRIPTION: The file size is reported correctly by FileZilla. Starting the transfer by dragging the file to the client window correctly starts the transfer. The time of transfer seems to be correctly reported using the file size and the transfer speeed (as displayed). When the progress window reaches the original file size, it reports zero time left. However, the transfter continues and in the case creates a much bigger file.

To me this seems like some kind of bug.

I am using 3.5.3 on Windows 7 (32-bit).

Whenever I login a FTP site, the message box will show the system message but it will roll up and crash the icon bar and menu bar, making icon bar and menu bar invisible. If I use a mouse to move over those icons or menu, that part will display the original graphic.

Seems the message box buffer display size is larger than the message box area.

FileZilla crashes if the entered host contains a forward slash, even it is just the forward slash. This happens no matter whether I use the quickconnect bar, the site manager or the manual transfer dialog.

If the forward slash is part of the protocol prefix it does not crash, so ​ftp://ftp.mozilla.org works and ​ftp://ftp.mozilla.org/ crashes.

This happens reproducibly on my desktop computer with FileZilla 3.6.0-rc1. I could not reproduce the crash with FileZilla 3.5.3 or with FileZilla 3.6.0-beta1. My environment is Windows 7 SP1 (32bit) and Windows 8 (64bit) on Intel Pentium D.

However, I could not reproduce the issue on my laptop with Windows XP SP3 on Intel Core 2 Duo.

LOCATION: "Site manager" dialog box, bottom-right "Copy" button under the left-hand browser panel.

ISSUE: The function performed by "Copy" button is different from the commonly known "copy" function (from Copy/cut/paste set of commands) which might be confusing to users.

In "site manager", "Copy" button performs "make a copy" or "duplicate" function. In contrast, commonly seen "copy" command performs "copy to clipboard" function.

SOLUTION SUGGESTION: Re-labelling the "Copy" button to: "Duplicate"

OPINION: In common English the verb "to copy" actually fits well the function "site manager's" "copy" button performs (i.e. creating a duplicate or a facsimile), right? But unfortunately, this verb entered computer GUI terminology as short for "copy to clipboard". Beh...

ISSUE: Dragging a file or a folder onto itself in local and remote filelists and tree-views results in inconsistent behavior from FileZilla.

a) Behavior when dragging directories in tree views: REMOTE TREE VIEW: Dragging a directory onto itself in remote tree-view: "Message: A directory cannot be dragged into one of its subdirectories." LOCAL TREE VIEW: "Error 13: permission denied" when dragging a system folder and "Error 22: invalid argument" when dragging a "regular" folder.

b) Behavior when dragging directories in filelists: REMOTE FILELIST: Dragging a file onto itself: "Message: Source and target of the drop operation are identical". Dragging a directory onto itself: "Message: A directory cannot be dragged into one of its subdirectories."

LOCAL FILELIST: Dragging a file onto itself: nothing happens (this is expected behavior). Dragging a directory onto itself: "Error 22: invalid argument" or "Error 13: permission denied", depending on permissions.

SOLUTION SUGGESTION: When a file or directory is dragged onto itself error message boxes don't have to appear at all. Dragging a file or a directory onto itself in any situation should not result in any feedback from from FileZilla. i.e. FileZilla should ignore any attempt to drag a file or a directory onto itself.

RATIONALE: I believe that the suggested behavior is common across many windowed platforms that use tree-views and file lists for file management. Dragging a file onto itself can be considered involuntary or accidental action. This kind of accidental action is especially common with users using pen tablets where a click with the pen tip often is accompanied with some dragging motion.

Additionally, removing the message/error boxes would streamline the interaction for the user a little, and also reduce a couple of GUI points that demand translation and maintenance.

I just upgrade from 3.53 to the current 3.6 Before the upgrade I could connect to one of my ftp sites, after the upgrade with no changes in site manager I get the error below.

This was an issue from 3.52 to 3.53 I believe (which I fixed on my server by a few certificate changes) What do I need to do to fix the below. This gets very tiring when the security scheme keeps changing over and over again.

Status: Resolving address of qedmrf.com Status: Connecting to ipaddress:21... Status: Connection established, waiting for welcome message... Response: 220 Welcome to XXX Technologies FTP service. For authorized users only. Command: AUTH TLS Response: 234 Proceed with negotiation. Status: Initializing TLS... Status: Verifying certificate... Command: USER Fuzeycompany Status: TLS/SSL connection established. Response: 331 Please specify the password. Command: PASS Response: 230 Login successful. Command: SYST Response: 215 UNIX Type: L8 Command: FEAT Response: 211-Features: Response: AUTH SSL Response: AUTH TLS Response: EPRT Response: EPSV Response: MDTM Response: PASV Response: PBSZ Response: PROT Response: REST STREAM Response: SIZE Response: TVFS Response: UTF8 Response: 211 End Command: OPTS UTF8 ON Response: 200 Always in UTF8 mode. Command: PBSZ 0 Response: 200 PBSZ set to 0. Command: PROT P Response: 200 PROT now Private. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" Command: TYPE I Response: 200 Switching to Binary mode. Command: PASV Response: 227 Entering Passive Mode (22,22,22,166,195,86) (NOTE ADDRESS IS MUNGED) Command: LIST Response: 150 Here comes the directory listing. Error: GnuTLS error -15: An unexpected TLS packet was received. Error: Disconnected from server: ECONNABORTED - Connection aborted Error: Failed to retrieve directory listing

---and at this point the connection breaks

Imagine the code:

PHP code PHP code PHP code comment from developer - this line does X PHP code

Filezilla modifies files to this: PHP code PHP code PHP code comment from developer this line does X PHP code

where last PHP code becomes comment! In all the files.

And why do you turn that compression on by default by the way? It doesn't speed up website - it only makes code less readable.

​ftp://leginfo.ca.gov/pub/code/gov/66001-67000/66499.11-66499.20¾

Username: anonymous Password: karl@…

This file, with the ¾ (that's 3/4) in the filename, shows in the list of files but won't transfer, at least not in ascii mode. I didn't try any other mode.

My system: P/C with Windows 7, 64 bit version. FileZilla version 3.6.0

bug at gui when connecting and scrolling log connection, field host, username, and pass are disappear.

CLIENT SIDE:

FileZilla Client

Version: 3.6.0.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2012-11-18 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 3.1.4 SQLite: 3.7.6.2

Operating system:

Name: Windows XP (build 2600, Service Pack 3) Version: 5.1 Platform: 32 bit system

SERVER SIDE:

vsftpd-2.2.2-11.el6.i686 on CentOS 6.3 x86 configured with:

tcp_wrappers=YES pasv_enable=YES ssl_enable=YES force_local_logins_ssl=YES force_local_data_ssl=YES

CLIENT DEBUG LOG: 13:18:36 Trace: CControlSocket::DoClose(64) 13:18:36 Trace: CControlSocket::DoClose(64) 13:18:36 Status: Resolving address of xxx.sk 13:18:36 Status: Connecting to 213.xxx:21... 13:18:36 Status: Connection established, waiting for welcome message... 13:18:36 Trace: CFtpControlSocket::OnReceive() 13:18:36 Response: 220 Welcome to FTP PB service. 13:18:36 Trace: CFtpControlSocket::SendNextCommand() 13:18:36 Command: AUTH TLS 13:18:36 Trace: CFtpControlSocket::OnReceive() 13:18:36 Response: 234 Proceed with negotiation. 13:18:36 Status: Initializing TLS... 13:18:36 Trace: CTlsSocket::Handshake() 13:18:36 Trace: CTlsSocket::ContinueHandshake() 13:18:36 Trace: CTlsSocket::OnSend() 13:18:36 Trace: CTlsSocket::OnRead() 13:18:36 Trace: CTlsSocket::ContinueHandshake() 13:18:37 Trace: CTlsSocket::OnRead() 13:18:37 Trace: CTlsSocket::ContinueHandshake() 13:18:37 Trace: CTlsSocket::Failure(-12, 10053) 13:18:37 Trace: GnuTLS alert 40: Handshake failed 13:18:37 Error: GnuTLS error -12: A TLS fatal alert has been received. 13:18:37 Trace: CRealControlSocket::OnClose(10053) 13:18:37 Trace: CControlSocket::DoClose(64) 13:18:37 Trace: CFtpControlSocket::ResetOperation(66) 13:18:37 Trace: CControlSocket::ResetOperation(66) 13:18:37 Error: Could not connect to server 13:18:37 Trace: CFileZillaEnginePrivate::ResetOperation(66) 13:18:37 Status: Waiting to retry...

SERVER VSFTPD.LOG: Mon Nov 19 14:05:00 2012 [pid 15066] CONNECT: Client "10.10.102.6" Mon Nov 19 14:05:00 2012 [pid 15066] FTP response: Client "10.10.102.6", "220 Welcome to FTP PB service." Mon Nov 19 14:05:00 2012 [pid 15066] FTP command: Client "10.10.102.6", "AUTH TLS" Mon Nov 19 14:05:00 2012 [pid 15066] FTP response: Client "10.10.102.6", "234 Proceed with negotiation." Mon Nov 19 14:05:01 2012 [pid 15066] DEBUG: Client "10.10.102.6", "SSL_accept failed: error:1408A0C1:SSL routines:SSL3_GET_CLIENT_HELLO:no shared cipher"

HISTORY: 3.6.0.1 - does not connect 3.6.0 - worked fine! 3.5.3 - does not connect 3.5.2 (and older) - worked fine!

ADDITIONAL INFO: There was no change in server configuration between trying FileZilla Client 3.6.0 and 3.6.0.1 - I tried 3.6.0 this morning and 3.6.0.1 this afternoon. I have not old VSFTPD.LOG with Client 2.5.3, so I'm not sure if there was same error message "no shared cipher".

I enter FileZilla with Host (ftp.acilballetto.com), my user name (acilballetto) and my password. The answer, after correct user authentication (331 User acilballetto.com OK. Password required) is : 530 Login authentication failed. So I don't have possibility to connect my account. What can I do? Thank you for answer.

I would like to re-open this ticket. ​http://trac.filezilla-project.org/ticket/5210

Three years ago it is claimed this was a "rejected ticket." And yet the exact same problem still exists.

"To solve this issue, simply upgrade to a modern server supporting the MLSD command o refrain from using leading spaces."

This is not true. Even servers completely up to date still have the problem with leading spaces and files that cannot be transferred. The main question is how come I can log into the same server with ANY OTHER FTP PROGRAM and the file will transfer perfectly. But using FileZilla and the files are displayed incorrectly and the transfer FAILS. I don't think this bug should just be rejected. IT IS A BUG THAT SHOULD BE FIXED!

I'm using version 3.6.0.1 and I don't see how someone can say this isn't really a bug when ALL other programs handle these files perfectly. Why can't FileZilla???

Please someone fix this! It is very annoying finding 50 files with leading spaces and then having to load up another ftp program and transfer each file manually... Thank you to whoever fixed this!!!!!

LOCATION Updating wizard is accessible via "Main menubar/Help/Check for Updates..."

ISSUE Possible redundancy in user interface. The FileZilla update wizard has a set of Back/Next buttons in the bottom of the wizard dialog box. As far as I can tell, "Back" button is never active. i.e. it is "grayed out" in all the steps of updating process.

SOLUTION SUGGESTION If "back" button really is not accessible at any moment during the updating process, perhaps it should be removed. This would imply another question: Is "wizard" approach to updating is the best one.

NOTE This papercut is present both on WinXP and OSX FileZilla Client versions.

Recently, do not know when it really started, I use it daily. Maybe 5 days ago now, I have Filezilla on the task bar which I hit and it always popped right up. Everything on there pops right up. But recenlty, it can take up to 45 seconds for it to start. Any idea what has happen. It does come up, but takes so long to start, you think you didn't hit the icon, so I hit it again. Then I end up with 2 of them. Any idea what is wrong.This is the only program that is slow like this. I tons of memory, 12 gig, 12 CPU cores, should not be doing that. Do I need to reload it. Do not think this is associated with any recent updates.

I recently installed FileZilla on my Windows 7 OS (had previously used it without issue on a Mac) and I am getting the following message when trying to edit .php files with Dreamweaver as an external editor (I am using the latest version of Filezilla (3.6.0.1) and Dreamweaver CS5.5):

The file 'index.php' cannot be opened: The associated program (WX_DDE#"F:\Program Files\Adobe\Adobe Dreamweaver CS5.5\Dreamweaver.exe", "index.php"##System#) could not be found. Please check your filetype associations

(This occurs with ANY .php file not just the index.php that is in the above message)

I did see an unsolved ticket that was opened 3 years ago about the same type of issue.

The only way that I was able to get around this was to do the following:

Go to Edit -> Settings -> Filetype Associations, manually add the following line and click ok:

php "F:\Program Files\Adobe\Adobe Dreamweaver CS5.5\Dreamweaver.exe" -open

I believe this appears to be some sort of bug because as mentioned prior when working with Filezilla on a Mac system (using Dreamweaver CS4) it all works fine and doesn't require this workaround.

El filezil andaba muy bien hasta q me pidio la actualizacion, lo actualize y no anduvo mas.... necesito un respuesta inmediata ya que es parte de mi trabajo..

I had hoped this error was fixed in 3.6.0.1 It's now affecting our customers if they make the mistake of updating from 3.5.3

Is there a work around?

Status: Resolving address of qedmrf.com Status: Connecting to 64.39.191.166:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220 Welcome to Technologies FTP service. For authorized users only. Trace: CFtpControlSocket::SendNextCommand() Command: AUTH TLS Trace: CFtpControlSocket::OnReceive() Response: 234 Proceed with negotiation. Status: Initializing TLS... Trace: CTlsSocket::Handshake() Trace: CTlsSocket::ContinueHandshake() Trace: CTlsSocket::OnSend() Trace: CTlsSocket::OnRead() Trace: CTlsSocket::ContinueHandshake() Trace: CTlsSocket::OnRead() Trace: CTlsSocket::ContinueHandshake() Trace: CTlsSocket::OnRead() Trace: CTlsSocket::ContinueHandshake() Trace: TLS Handshake successful Trace: Cipher: AES-256-CBC, MAC: SHA1 Status: Verifying certificate... Trace: CFtpControlSocket::SendNextCommand() Command: USER Fuzh Status: TLS/SSL connection established. Trace: CTlsSocket::OnRead() Trace: CFtpControlSocket::OnReceive() Response: 331 Please specify the password. Trace: CFtpControlSocket::SendNextCommand() Command: PASS Trace: CTlsSocket::OnRead() Trace: CFtpControlSocket::OnReceive() Response: 230 Login successful. Trace: CFtpControlSocket::SendNextCommand() Command: SYST Trace: CTlsSocket::OnRead() Trace: CFtpControlSocket::OnReceive() Response: 215 UNIX Type: L8 Trace: CFtpControlSocket::SendNextCommand() Command: FEAT Trace: CTlsSocket::OnRead() Trace: CFtpControlSocket::OnReceive() Response: 211-Features: Trace: CTlsSocket::OnRead() Trace: CFtpControlSocket::OnReceive() Response: AUTH SSL Response: AUTH TLS Response: EPRT Response: EPSV Trace: CTlsSocket::OnRead() Trace: CFtpControlSocket::OnReceive() Response: MDTM Response: PASV Response: PBSZ Response: PROT Response: REST STREAM Response: SIZE Response: TVFS Response: UTF8 Response: 211 End Trace: CFtpControlSocket::SendNextCommand() Command: OPTS UTF8 ON Trace: CTlsSocket::OnRead() Trace: CFtpControlSocket::OnReceive() Response: 200 Always in UTF8 mode. Trace: CFtpControlSocket::SendNextCommand() Command: PBSZ 0 Trace: CTlsSocket::OnRead() Trace: CFtpControlSocket::OnReceive() Response: 200 PBSZ set to 0. Trace: CFtpControlSocket::SendNextCommand() Command: PROT P Trace: CTlsSocket::OnRead() Trace: CFtpControlSocket::OnReceive() Response: 200 PROT now Private. Status: Connected Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFileZillaEnginePrivate::ResetOperation(0) Status: Retrieving directory listing... Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::ChangeDirSend() Command: PWD Trace: CTlsSocket::OnRead() Trace: CFtpControlSocket::OnReceive() Response: 257 "/" Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpControlSocket::ParseSubcommandResult(0) Trace: CFtpControlSocket::ListSubcommandResult() Trace: state = 1 Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: state = 1 Command: TYPE I Trace: CTlsSocket::OnRead() Trace: CFtpControlSocket::OnReceive() Response: 200 Switching to Binary mode. Trace: CFtpControlSocket::TransferParseResponse() Trace: code = 2 Trace: state = 1 Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: state = 2 Command: PASV Trace: CTlsSocket::OnRead() Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (74,39,191,166,195,85) Trace: CFtpControlSocket::TransferParseResponse() Trace: code = 2 Trace: state = 2 Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: state = 4 Command: LIST Trace: CTransferSocket::OnConnect Trace: CTlsSocket::Handshake() Trace: Trying to resume existing TLS session. Trace: CTlsSocket::ContinueHandshake() Trace: CTlsSocket::OnSend() Trace: CTlsSocket::OnSend() Trace: CTlsSocket::OnRead() Trace: CTlsSocket::ContinueHandshake() Trace: CTlsSocket::OnRead() Trace: CFtpControlSocket::OnReceive() Response: 150 Here comes the directory listing. Trace: CFtpControlSocket::TransferParseResponse() Trace: code = 1 Trace: state = 4 Trace: CFtpControlSocket::SendNextCommand() Trace: CFtpControlSocket::TransferSend() Trace: state = 5 Trace: CTlsSocket::OnRead() Trace: CTlsSocket::Failure(-15, 10053) HERE'S THE LINE WHERE IT DIES AND THE CONNECTION IS LOST Error: GnuTLS error -15: An unexpected TLS packet was received. Trace: CRealControlSocket::OnClose(10053) Error: Disconnected from server: ECONNABORTED - Connection aborted Trace: CControlSocket::DoClose(64) Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Error: Failed to retrieve directory listing Trace: CFileZillaEnginePrivate::ResetOperation(66)

Using FileZilla, I cannot connect to any of my Windows Server 2012 machines when using FTPES on IIS 8.

FileZilla 3.6.0.2 debug level 4 log:

Trace:	CControlSocket::DoClose(64)
Trace:	CControlSocket::DoClose(64)
Status:	Resolving address of mysite.mydomain.com
Status:	Connecting to 1.1.1.1:21...
Status:	Connection established, waiting for welcome message...
Trace:	CFtpControlSocket::OnReceive()
Response:	220-Microsoft FTP Service
Trace:	CFtpControlSocket::OnReceive()
Response:	220 MyFtpService
Trace:	CFtpControlSocket::SendNextCommand()
Command:	AUTH TLS
Trace:	CFtpControlSocket::OnReceive()
Response:	234 AUTH command ok. Expecting TLS Negotiation.
Status:	Initializing TLS...
Trace:	CTlsSocket::Handshake()
Trace:	CTlsSocket::ContinueHandshake()
Trace:	CTlsSocket::OnSend()
Trace:	CTlsSocket::OnRead()
Trace:	CTlsSocket::ContinueHandshake()
Trace:	CTlsSocket::OnRead()
Trace:	CTlsSocket::ContinueHandshake()
Trace:	CTlsSocket::Failure(-110, 10053)
Error:	GnuTLS error -110: The TLS connection was non-properly terminated.
Trace:	CTlsSocket::OnSocketEvent(): close event received
Trace:	CRealControlSocket::OnClose(10053)
Trace:	CControlSocket::DoClose(64)
Trace:	CFtpControlSocket::ResetOperation(66)
Trace:	CControlSocket::ResetOperation(66)
Error:	Could not connect to server
Trace:	CFileZillaEnginePrivate::ResetOperation(66)

I have already tried reordering cipher suites as desribed here, but it didn't help: ​http://blogs.msdn.com/b/kaushal/archive/2011/10/03/taming-the-beast-browser-exploit-against-ssl-tls.aspx

Changing certificates on the FTP site doesn't help as well. I think the error happens before certificate is received.

WS_FTP and some other FTP clients work fine, while WinSCP makes a connection but throws errors on file transfer (something about invalid signature). It did help with file transfers when I prioritized TLS_RSA_WITH_RC4_128_SHA on the server SSL Cipher Suite Order.

It is worth noting that a version of FileZilla from a few weeks ago (I don't know which one exactly) connected fine, but was not able to transfer files (also a lot of errors), exactly what WinSCP does now.

Connecting to my Windows Server 2008 R2 (IIS 7.5) machines works perfectly. FTP sites are configured the same way as they are in the IIS 8 installation.

Hello,

When connecting to either a single or multiple servers, the user interface above the message log (the toolbar) randomly disappears. In order to get it back, I have to hover my mouse cursor over the toolbar to get individual buttons back.

This only happens with the OpenCrystal theme. With every other theme, this does not happen.

Here is a screenshot of the bug in action:

Dylan. --

FileZilla Client 3.6.0.2 Windows 7 Ultimate x86 + SP1 Intel Celeron M 575 (Merom-2M)

If in the file sitemanager.xml the port missing like "<Port>21</Port>" FileZilla doesn't show the related entry in the server list. I think FileZilla should fill this information automatically with port 21 if it is missing like it is already done with the other configuration values.

I try to open filezilla through unity in Ubuntu 12.04 and the program doesn't open. I tried several times, looked at system monitor and I see multiple instances open, if I close them all and try again nothing opens.

I tried via command line and it just hangs.

$ filezilla -v FileZilla 3.5.3, compiled on 2012-03-28

Everytime I am uploading something (joomla in this case) after a certain time (around 1-2 minutes) the whole Internet connection brakes down -> Router is blinking; Windows says that there is a problem with the DNS Server etc. So, then it'll take some time again (up to 10-60(!) minutes, even with a router reset) until the internet connection is working again.

In fact, I copied the corresponding files from my USB stick onto my system hard disc (Desktop) [regarding: http://forum.wdlxtv.com/viewtopic.php?f=3&t=2796] and set an upload limit to 300 KiB/s ... Didn't change anything.

To reproduce...

1. Enable speed limits
2. Exit Client
3. Restart Client

The menu item is not checked but speed limits are seemingly enabled. Selecting the menu item will not set check on. Selecting the menu item again will set check on.

BUG: Pressing "New" button in "Edit filters" panel, while a filter is highlighted, renames the filter.

EXPECTED BEHAVIOR: Pressing the "New" button in "Edit filters" panel should create a new filter, instead of renaming the existing one.

DESCRIPTION:

• Create a new filter and name it.
• Select it in the chooser to the right so that it is highlighted.
• Now, click on the "New" button (located just below the chooser).
• Instead of creating a new filter, FileZilla renames the existing, previously selected filter.

We use Quest Authentication Services (QAS) on unix to authenticate users. Using filezilla 3.0.6.2 (client) on windows 7. Trying to connect to UNIX HPUX Version 11.31 running Quest Authentican Services for login authentication

Client version: 3.6.0.2 Character set for non-Unicode programs: Traditional Chinese - Taiwan (950)

Crash happens when try to open a local folder with non-English path in Windows Explorer, using the "Open" function in the right-click pop-up context menu. Crash happens both in the file pane and the directory pane.

Specifically, crash happens when opening the folder path that contains non-English and not-within-the-default-language characters. For example, when opening the folder path contains Simplified Chinese or Japanese characters, the client crashes. But when opening the folder path contains Traditional Chinese characters, the client does not crash, but still does not open the folder in Windows Explorer.

I tried this bug on two different computers, and both has this problem. Both machines are using Windows 7 Pro SP1 x64.

I have been logging in for year and half no problem - 2 weeks ago connection just sits there and then after a moment says timed out. I had ATT work on it from there end (see below) but still getting the same error timed out messages

have run the ping test from your modem and here are the results.

It is coming back with no errors. I have changed some of your firewall setting on your modem to allow FTP

Hello.

Win 7 64-bit OS.

I install Filezilla - latest version - everything seems OK.

Next usage, it's reverted. Latest example - installed 3.6.0.2 yesterday. Today, it's 3.3.5.1 - offering an upgrade to 3.6.0.2.

Help!

Thanks and Regards,

Kerry

In local site browser, when I double click a folder shortcut which is placed on my desktop, the program uploads it to the server instead of opening the related folder in local site browser.

When setting up a filter condition using "filesize" user is allowed to enter a number (e.g. 3). This number represents a filesize, but, unfortunately it is not clear which unit is considered. MB/KB/...?

Moreover, if a user explicitly states the unit in the filter condition's input box (e.g. 3MB) the filter condition fails to validate.

SUGGESTION: Either suggest to user which unit is considered when entering filesize, or allow user to explicitly state or choose the unit.

Starting upload of D:\ProjectsVSS\ATWPL_B2B\B2B\Flight\SpecialRoundTrip.aspx Status: Retrieving directory listing... Command: PASV Response: 227 Entering Passive Mode (50,22,228,18,25,105) Command: MLSD Response: 150 Connection accepted Response: 226 Transfer OK Command: PASV Response: 227 Entering Passive Mode (50,22,228,18,25,106) Command: STOR SpecialRoundTrip.aspx Response: 150 Connection accepted Response: 550 can't access file. Error: File transfer failed

i am getting error 550 can't access file, In the same folder when I am trying to upload 4 files in the server, one file is uploaded successfully other three are failed.

We have a hosting setup where we allow ftp using ftps. On one of our server while connecting over ftp we encounter following error.

This problem has not been encountered on any other server and we have many of them having same ftp setup/configuration.

This problem occurs with version 3.6,3.6.0.2 and 3.6.0.1 on archlinux.but on downgrading to version 3.5.3 there was no such problem.

I also found that one of our user on windows xp using version 3.3.2.1 also encountered this error.

This error was not encountered when using other ftp clients namely fireftp and coreftp.

I also tried downgrading gnutls but it didnt helped the problem persisted.

Status:	Resolving address of ******************
Status:	Connecting to *************:21...
Status:	Connection established, waiting for welcome message...
Trace:	CFtpControlSocket::OnReceive()
Response:	220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
Response:	220-You are user number 6 of 150 allowed.
Response:	220-Local time is now 12:16. Server port: 21.
Response:	220-This is a private system - No anonymous login
Response:	220-IPv6 connections are also welcome on this server.
Response:	220 You will be disconnected after 5 minutes of inactivity.
Trace:	CFtpControlSocket::SendNextCommand()
Command:	AUTH TLS
Trace:	CFtpControlSocket::OnReceive()
Response:	234 AUTH TLS OK.
Status:	Initializing TLS...
Trace:	CTlsSocket::Handshake()
Trace:	CTlsSocket::ContinueHandshake()
Trace:	CTlsSocket::OnSend()
Trace:	CTlsSocket::OnRead()
Trace:	CTlsSocket::ContinueHandshake()
Trace:	CTlsSocket::OnRead()
Trace:	CTlsSocket::ContinueHandshake()
Trace:	TLS Handshake successful
Trace:	Cipher: AES-256-CBC, MAC: SHA1
Status:	Verifying certificate...
Trace:	CFtpControlSocket::SendNextCommand()
Command:	USER *******
Status:	TLS/SSL connection established.
Trace:	CTlsSocket::OnRead()
Trace:	CFtpControlSocket::OnReceive()
Response:	331 User migrate OK. Password required
Trace:	CFtpControlSocket::SendNextCommand()
Command:	PASS ************
Trace:	CTlsSocket::OnRead()
Trace:	CFtpControlSocket::OnReceive()
Response:	230 OK. Current restricted directory is /
Status:	Server does not support non-ASCII characters.
Trace:	CFtpControlSocket::SendNextCommand()
Command:	PBSZ 0
Trace:	CTlsSocket::OnRead()
Trace:	CFtpControlSocket::OnReceive()
Response:	200 PBSZ=0
Trace:	CFtpControlSocket::SendNextCommand()
Command:	PROT P
Trace:	CTlsSocket::OnRead()
Trace:	CFtpControlSocket::OnReceive()
Response:	200 Data protection level set to "private"
Status:	Connected
Trace:	CFtpControlSocket::ResetOperation(0)
Trace:	CControlSocket::ResetOperation(0)
Trace:	CFileZillaEnginePrivate::ResetOperation(0)
Trace:	Measured latency of 23 ms
Status:	Retrieving directory listing...
Trace:	CFtpControlSocket::SendNextCommand()
Trace:	CFtpControlSocket::ChangeDirSend()
Command:	PWD
Trace:	CTlsSocket::OnRead()
Trace:	CFtpControlSocket::OnReceive()
Response:	257 "/" is your current location
Trace:	CFtpControlSocket::ResetOperation(0)
Trace:	CControlSocket::ResetOperation(0)
Trace:	CFtpControlSocket::ParseSubcommandResult(0)
Trace:	CFtpControlSocket::ListSubcommandResult()
Trace:	  state = 1
Trace:	CFtpControlSocket::SendNextCommand()
Trace:	CFtpControlSocket::TransferSend()
Trace:	  state = 1
Command:	TYPE I
Trace:	CTlsSocket::OnRead()
Trace:	CFtpControlSocket::OnReceive()
Response:	200 TYPE is now 8-bit binary
Trace:	CFtpControlSocket::TransferParseResponse()
Trace:	  code = 2
Trace:	  state = 1
Trace:	CFtpControlSocket::SendNextCommand()
Trace:	CFtpControlSocket::TransferSend()
Trace:	  state = 2
Command:	PASV
Trace:	CTlsSocket::OnRead()
Trace:	CFtpControlSocket::OnReceive()
Response:	227 Entering Passive Mode (**************,189)
Trace:	CFtpControlSocket::TransferParseResponse()
Trace:	  code = 2
Trace:	  state = 2
Trace:	CFtpControlSocket::SendNextCommand()
Trace:	CFtpControlSocket::TransferSend()
Trace:	  state = 4
Command:	MLSD
Trace:	CTransferSocket::OnConnect
Trace:	CTlsSocket::Handshake()
Trace:	Trying to resume existing TLS session.
Trace:	CTlsSocket::ContinueHandshake()
Trace:	CTlsSocket::OnSend()
Trace:	CTlsSocket::OnSend()
Trace:	CTlsSocket::OnRead()
Trace:	CFtpControlSocket::OnReceive()
Response:	150 Accepted data connection
Trace:	CFtpControlSocket::TransferParseResponse()
Trace:	  code = 1
Trace:	  state = 4
Trace:	CFtpControlSocket::SendNextCommand()
Trace:	CFtpControlSocket::TransferSend()
Trace:	  state = 5
Trace:	CTlsSocket::OnRead()
Trace:	CTlsSocket::ContinueHandshake()
Trace:	CTlsSocket::Failure(-54, 103)
Error:	GnuTLS error -54: Error in the pull function.
Trace:	CTransferSocket::OnClose(103)
Error:	Transfer connection interrupted: ECONNABORTED - Connection aborted
Trace:	CTransferSocket::TransferEnd(3)
Trace:	CFtpControlSocket::TransferEnd()
Trace:	CTlsSocket::OnRead()
Trace:	CTlsSocket::Failure(-110, 103)
Error:	GnuTLS error -110: The TLS connection was non-properly terminated.
Trace:	CRealControlSocket::OnClose(103)
Error:	Disconnected from server: ECONNABORTED - Connection aborted
Trace:	CControlSocket::DoClose(64)
Trace:	CFtpControlSocket::ResetOperation(66)
Trace:	CControlSocket::ResetOperation(66)
Trace:	CFtpControlSocket::ResetOperation(66)
Trace:	CControlSocket::ResetOperation(66)
Error:	Failed to retrieve directory listing
Trace:	CFileZillaEnginePrivate::ResetOperation(66)
Trace:	CControlSocket::DoClose(64)
Trace:	CControlSocket::DoClose(64)

I start a file transfer from remote FTP site to local machine, and during the transfer "Toggles processing of the transfer queue" is enabled and "pushed down", and "Cancels the current operation" button is disabled (see attached screenshot). And when I press "Toggles processing..." button, the transfer is actually cancelled.

What I actually expect is "Cancels..." button is enabled and cancels the current/last active transfer.

I have several files sized 734,003,200 bytes (split of a larger file.) If the download is interrupted (by my network changing on my laptop), and the download "resumed", every time the resulting file is larger than the original file. I don't recall the exact size of the resulting file, but it is around 1-10MB more. When the status shows [ > 100% ] and the file is larger than expected, I decide to stop. This happened about 7 times with none being resumed successfully.

FileZilla Client

Version: 3.6.0.2

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2012-11-29 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 3.1.4 SQLite: 3.7.6.2

Operating system:

Name: Windows NT 6.1 (build 7601, Service Pack 1) Version: 6.1 Platform: 64 bit system

Hi, I have found a bug which causes that files with filenames including german characters (i.e. ä, ö, ü, etc.) are not transferred. Is there a solution to it? many thanks

Using client 6.6.02, Win 7 Pro client machine. target machine is Red Hat Enterprise server. SFTP.

Filezilla reports errors when it needs to create a directory. it then creates the dir OK, and then reports errors on a file upload to the new dir. Then uploads file OK later.

The errors appear to be spurious but continally demand cross-checking that files did actually upload. These errors are consistent and completely repeatable. They are not random upload errors as might normally occur. Log excerpt below.

Other FTP clients do not do this in exactly the same situation - same machines, protocol, SFTP user etc.

Other FTP clients do not do this in exactly the same situation - same machines, protocol, SFTP user etc.

All the best folks.

I am try to connect FTP Server but getting following erroe Connection attempt failed with "WSAEADDRNOTAVAIL - Cannot assign requested address".

I am using DataCard for internet connection

Hi,

I've found a reproducible issue regarding corruption when transferring files.

How to reproduce:

1) Install FileZilla 3.6.0.2 client on Mac or Windows 7 - both reproduce this issue.

2) Install QNX Neutrino 6.5.0 SP1 OS in a VM or native on an x86 machine. Easiest way is to download the Virtual Machine posted here: ​http://www.qnx.com/download/group.html?programid=20905.

Once QNX is installed, edit /etc/inetd.conf and uncomment the line of text beginning with "ftp". Then run "inetd" if it is not already running. Also note the IP address.

3) Open FileZilla client and transfer the attached binary file "helloworld" to the FTP server running on the QNX host.

4) Checksum the file (cksum utility) before and after transferring. You'll see that the checksum is different!

5) You can copy the file from QNX back to your machine by tarring the file, e.g. "tar cvf helloworld.tar helloworld" then using FileZilla to transfer the file, or by using any FTP client other than FileZilla to ensure the file doesn't get corrupted a second time. You can then hex dump the files to see the specific differences before and after the corruption.

Notes:

• I've used other FTP clients before, never seen this problem. For example from a Mac you can use the built in ftp client and there is no corruption.
• I tried copying the same file to an Ubuntu 10.04 Virtual Machine running vsftpd but the corruption did not occur.
• I created the helloworld file by writing a C file which prints hello world and compiling using the QNX toolchain. There's got to be other files that reproduce this issue but I haven't found any others yet.

I get connection errors when trying to connect. I have set the connection to auto. I found out from my web hosting provider that I have 7-8 connections that are going on simultaenously. It doesn't disconnect properly.

Hi. Everything seems to be working fine, but I'm getting the "Failed To Retrieve Directory Listing" error for only one particular file. I can't download the file and I can't open it to look at the contents. It's puzzling because out of the hundreds of files I've downloaded, this is the only one that has given me a problem. Here is what I see on the log if this helps:

Command: CWD Fangoria Response: 550 Failed to change directory. Error: Failed to retrieve directory listing Status: Retrieving directory listing... Command: CWD /files Response: 250 Directory successfully changed. Command: CWD Fangoria Response: 550 Failed to change directory. Error: Failed to retrieve directory listing

Any information you may be able to give would be greatly appreciated. Again, it's only ever happened with this one dang file! Thanks, Steve.

I d/l the newest version of Filezilla upon the automatic prompt today when I opened Filezilla. Afterwards, I was unable to quick connect. I entered in my user / pw and am still unable to connect. I get a CRITICAL ERROR message.

I admit I am not very FTP savy...but unsure how to proceed. I have my username/pw written down, so I feel I am entering correct information.

file and directory name are error.

Try ftp connect with username and password - connect will be ok - password is saved within servermanager.

Now choose SFTP from Protokoll and try to connect. You will see connection errors but no connect. Using Filezilla 3.6.02 will not.

Error: Server sent disconnect message Error: type 2 (protocol error):

Using WinSCP will work doing the same thing.

After loading update 3.6.0.2, I can't upload or download files or folders. The update was delivered automatically.

When I right click a file or folder, "Download" and "Add files to queue" are grayed out. Double clicking the file or folder doesn't work either.

This happens on both a Win7 Professional with Service Pack 1 machine and an XP Professional 2002 with Service Pack 3 machine.

If I try to connect through site manager i get the following errors

Status: Resolving address of heatingnation.net Status: Connecting to 66.96.147.103:80... Status: Connection established, waiting for welcome message... Error: Connection timed out Error: Could not connect to server

if i try to connect through quick connect i get the following errors

Response: 220 Ipage FTP Server ready Command: USER heatingnationnet Response: 331 Password required for heatingnationnet Command: PASS * Response: 530 Login incorrect. Error: Critical error Error: Could not connect to server

Every file downloaded from a ftp server (fileapp on iPad) whose size is > 1MB, is truncated to 1MB.

For example a file whose size on ipad is 1.467.023 byte when downloaded is truncated to 1.048.576 byte.

Downloading it with another client (command line on OSX, or explorer on Win7) works well.

The 2 hosts (ipad and ftp client) are on the same ip network (no routing) without any proxy.

Filezilla doesn't display any error message and the transfer is ended succesfully, even if it truncate the file.

Regards Alessandro

I entered an IPv6 address into the host block and it gives me the following error: Could not parse server address: Invalid Port given. The port has to be a value from 1 to 65535.

I verified that my address was valid by pinging the address with the -6 switch to force IPv6. Received replies back.

Tried with port blank and set to 21. Get the same results.

Set debug level to 3 but don't see any logs, probably because it never connected.

I entered an IPv6 address into the host block and it gives me the following error: Could not parse server address: Invalid Port given. The port has to be a value from 1 to 65535.

I verified that my address was valid by pinging the address with the -6 switch to force IPv6. Received replies back.

Tried with port blank and set to 21. Get the same results.

Set debug level to 3 but don't see any logs, probably because it never connected.

Hello,

Everytime I close FileZilla, it crashes. I'm currently using the latest version avaible (3.6.0.2).

I think those crashes started around v3.5.

Thanks,

Try to launch FileZilla Client (without "run as admin") and go to Windows\system32 folder on 64bit system (i.e. Windows 7). List your local files and try to identify aclui.dll. Note the size. Launch cmd.exe as admin and try to dir \windows\system32\aclui.dll. Compare sizes of your files. Now try to dir \windows\syswow64\aclui.dll As you can see Filezilla tells that displays data from system32 and in fact displays the content of syswow64. The application should be 64bit aware and use real folders without redirection. Look at ​http://msdn.microsoft.com/en-us/library/windows/desktop/aa384187(v=vs.85).aspx for additional info.

Adding profile on Site Manager Host: ftps://ftp.site.com Port: 990 Protocol: SFTP -SSH File

After entering the values and hitting connect on the site manager it connects, but when re pulling the profile up again it saves as Protocol: FTP with no port. If I don't specify ftps:// on the host it fails to connect. If I try adding ftps://ftp.site.com from an imported profile it adds [] around the host and pops a warning "Invalid protocol specified. Value protocols are: ftp: for normal FTP....."

Good morning, I recently downloaded Office 365 to my office computers and now when we try to open an Excel Spreadsheet in the FTP, it comes up blank. I spoke with Office 365 Support and they said that I needed to contact you all because there was an issue with the port configuration. Can you all help me with this? I cannot perform my duties until this is resolved.

Hi, It accepts the login & password, but then hangs on command MLSD

Hello,

I'm failing to get a directory listing under special circumstances.

How to Reproduce:

1.) Create a directory named test test test ""d'test test"" test 2.) Place any file into the directory. 3.) Go into the directory and attempt to refresh the listing.

You should be presented with this error:

16:18:49 Command: CWD /test test test """"d'test test"""" test 16:18:49 Response: 550 Failed to change directory. 16:18:49 Error: Failed to retrieve directory listing

Hello Sir,

I am trying to upload a file through FileZilla Client to customized Apache FTP Server. If the upload fails due to any of the business decisions made on server[connection is not lost], FileZilla client tries to upload the file repeatedly multiple times.

Is there any setting in FileZilla client that can restrict the number of retries to 0 for uploading the file. If the setting is not in FileZilla Client, Could you suggest a way out.

Regards, Gulshan

This issue is 100% reproducible. Windows 8 64-bit will crash during the following conditions.

1. Have a file larger than 2GB available. (Test file I used was 2.4GB). Be connected to a valid remote FTP site.
2. Use FileZilla Portable 3.6.0.2.
3. From the OS (not from the "Local Site" pane in FileZilla), drag the file to the "Remote Site" window.
4. Watch as the Windows 8 operating system crashes and your computer reboots.

I have attached an example minidump file for analysis.

ver. 3.6.0.2 Running Win 7 Ultimate

I have 7 domains spread across 2 IP addresses. If I ftp to one, then go to another to ftp something else, FileZilla will not release from the first connection no matter what I do. The only way I can disconnect from the initial ftp connection is to completely shut FileZilla down, then restart.

Whenever I try to connect to a Server, I get "Connection Timed Out" followed by "Could not connect to the server" errors. Other users in my office do not have this problem. I tried to reinstall the program and this did not help anything.

filezilla client v3.6.0.2

in left side folder pane, right-click a folder, choose open, nothing happens.

i expected explorer to open with the folder in a window.

I downloaded the latest version of Filezilla and was trying to connect to my site - reemagination.com using the FTP username/pswd provided by the hosting site. I am not able to connect. Here is the log being produced --

Status: Connecting to 74.208.182.70:21... Status: Connection attempt failed with "EACCES - Permission denied". Error: Could not connect to server Status: Waiting to retry... Status: Delaying connection for 1 second due to previously failed connection attempt... Status: Connecting to 74.208.182.70:21... Status: Connection attempt failed with "EACCES - Permission denied". Error: Could not connect to server Status: Resolving address of reemagination Status: Connection attempt failed with "EAI_NODATA - No address associated with nodename". Error: Could not connect to server Status: Waiting to retry... Status: Delaying connection for 1 second due to previously failed connection attempt... Status: Resolving address of reemagination Status: Connection attempt failed with "EAI_NODATA - No address associated with nodename". Error: Could not connect to server Status: Resolving address of www.reemagination.com Status: Connecting to 74.208.182.70:21... Status: Connection attempt failed with "EACCES - Permission denied". Error: Could not connect to server Status: Waiting to retry... Status: Delaying connection for 1 second due to previously failed connection attempt... Status: Resolving address of www.reemagination.com Status: Connecting to 74.208.182.70:21... Status: Connection attempt failed with "EACCES - Permission denied". Error: Could not connect to server Status: Resolving address of reemagination.com Status: Connecting to 74.208.182.70:21... Status: Connection attempt failed with "EACCES - Permission denied". Error: Could not connect to server Status: Waiting to retry... Status: Delaying connection for 1 second due to previously failed connection attempt... Status: Resolving address of reemagination.com Status: Connecting to 74.208.182.70:21... Status: Connection attempt failed with "EACCES - Permission denied". Error: Could not connect to server

On my work computer, I have an older version of Filezilla - 3.5.3 and I tried connecting there with the same username/pswd and it connects just fine. I was even able to upload my updated source code to the site.

Looks like a bug in the new version?

I try reconnect to my last site ​Taruhan Bola but always failure, i already to uninstall but keep failed.

my filezilla version 3.6.0.2

I uploaded a UTF-16 text file with the following content:

FF FE 48 00 65 00 6C 00 6C 00 6F 00 0D 00 0A 00 57 00 6F 00 72 00 6C 00 64 00

Note the correct BOM for UTF-16 little endian and that every second byte in the text is set to zero.

After downloading it again the content changes like this:

FF FE 48 00 65 00 6C 00 6C 00 6F 00 0D 00 0D 0A 00 57 00 6F 00 72 00 6C 00 64 00

FileZilla transmits the file in text mode and because of that the UTF-16 line ending chars get corrupted to 8 bit ASCII line endings. In this case only 0A 00 got corrupted to 0D 0A 00, because of Windows -> Unix -> Windows.

The file is now 1 byte longer (an odd byte count for UTF-16 files is already invalid) and the content is broken.

Uploading in binary mode avoids this problem, so I suggest that FileZilla detects UTF-16 using BOM or line endings in 0D 00 0A 00 format and uses binary mode for these files by default to avoid corruption.

I get an error every time I try to download the ± character. It is not a foreign language, just something I come across often with technical people. Can you please include support for this?

Thank you. I love this program otherwise.

Below are my details:

FileZilla Client

Version: 3.6.0.2 Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2012-11-29 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 3.1.4 SQLite: 3.7.6.2

Operating system:

Name: Windows Server 2003 (build 3790, Service Pack 2) Version: 5.2 Platform: 64 bit system

Status: Connecting to [deleted]... Status: Connection established, waiting for welcome message... Response: 220 (vsFTPd 2.3.4) Command: USER [deleted] Response: 331 Please specify the password. Command: PASS Response: 230 Login successful. Command: SYST Response: 215 UNIX Type: L8 Command: FEAT Response: 211-Features: Response: EPRT Response: EPSV Response: MDTM Response: PASV Response: REST STREAM Response: SIZE Response: TVFS Response: UTF8 Response: 211 End Command: OPTS UTF8 ON Response: 200 Always in UTF8 mode. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" Command: TYPE I Response: 200 Switching to Binary mode. Command: PASV Response: 227 Entering Passive Mode ([deleted]) Command: LIST Response: 150 Here comes the directory listing. Response: 226 Directory send OK. Status: Invalid character sequence received, disabling UTF-8. Select UTF-8 option in site manager to force UTF-8. Status: Calculating timezone offset of server... Command: MDTM 524120092A5034A17±pg04.dwg Response: 213 20130408195423 Status: Timezone offsets: Server: 0 seconds. Local: -25200 seconds. Difference: -25200 seconds. Status: Directory listing successful Status: Connecting to [deleted]... Status: Connection established, waiting for welcome message... Response: 220 (vsFTPd 2.3.4) Command: USER [deleted] Response: 331 Please specify the password. Command: PASS Response: 230 Login successful. Command: OPTS UTF8 ON Response: 200 Always in UTF8 mode. Status: Connected Status: Starting download of /524120092A5034A17±pg04.dwg Command: CWD / Response: 250 Directory successfully changed. Command: PWD Response: 257 "/" Command: TYPE I Response: 200 Switching to Binary mode. Command: PASV Response: 227 Entering Passive Mode ([deleted]) Command: RETR 524120092A5034A17±pg04.dwg Response: 550 Failed to open file. Error: Critical file transfer error Status: Disconnected from server

When transferring huge amounts of data (Filezilla Client) I get out of memory errors.

I can see in the taskmanager that FZ is using more and more memory. It starts reporting out of memory after slowly climbing from 57.000 kb to 340.000 kb in taskmanager. I am copying around 50 domains with WordPress sites.

It does not make any difference to free up memory by killing processes after FZ has started.

Queue item cleared anyway when transfer fails due to permission denied on target.

The "Critical file transfer error" message is difficult to spot in the log window when transferring a lot of files.

Preferred behaviour would be for item to remain in the queue, with status reflecting the appropriate error, so user can detect this easily.