Custom Query (4044 matches)

Problems uploading since new version of FZ updated Insecure server messages never had before, files don't load or fail. I had an older version of FZ on another PC and it is fine. Also more stable when dragging and dropping files, new version skips down remote directory files

This error message began with version 3.37.4 and continues with new version 3.38.1. What does it mean and how do I fix it. Thanks...Peter

Error message my customer is getting is This server does not support FTP over TLS. If you continue, your password and files will be sent in clear over the internet.

Please advise

Thanks Ryan

after update v3.10.1.1 i cannot connect my servers problem is

Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: Connection timed out Error: Could not connect to server

after update v3.10.1.1 i cannot connect my servers problem is

Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: Connection timed out Error: Could not connect to server

after update v3.10.1.1 i cannot connect my servers problem is

Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: Connection timed out Error: Could not connect to server

When I am connected FTP show error

Status: Connecting to 184.164.144.133:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server Status: Waiting to retry... Status: Connecting to 184.164.144.133:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 3 of 50 allowed. Response: 220-Local time is now 02:15. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server Status: Connecting to 184.164.144.133:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server Status: Waiting to retry... Status: Connecting to 184.164.144.133:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 5 of 50 allowed. Response: 220-Local time is now 02:17. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server

updated to 3.10.0.1 last week Failed to login Today updated to 3.10.0.2 Failed to login

Seems to be same as Bug ticket #10089

Log:

Status: Resolving address of www.cairnsholidayhomes.com.au Status: Connecting to 113.20.1.106:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Error: Connection timed out Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of www.cairnsholidayhomes.com.au Status: Connecting to 113.20.1.106:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 2 of 50 allowed. Response: 220-Local time is now 18:35. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220 You will be disconnected after 15 minutes of inactivity. Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: Connection timed out Error: Could not connect to server Status: Resolving address of www.cairnsholidayhomes.com.au Status: Connecting to 113.20.1.106:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Error: Connection timed out Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of www.cairnsholidayhomes.com.au Status: Connecting to 113.20.1.106:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 1 of 50 allowed. Response: 220-Local time is now 18:36. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220 You will be disconnected after 15 minutes of inactivity. Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: Connection timed out Error: Could not connect to server

On the about dialog there is a button for copying the displayed information to the clipboard. I have pasted the result below and as you can see the "Compiled for" and "Compiled on" entries have the same data. A screenshot of the dialog is also attached which seems to show to the correct data.

FileZilla Client
----------------

Version:          3.2.4

Build information:
  Compiled for:   i586-pc-mingw32msvc
  Compiled on:    i586-pc-mingw32msvc
  Build date:     2009-04-21
  Compiled with:  i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2)
  Compiler flags: -g -O2 -Wall -g -fexceptions

Dependencies:
  wxWidgets:      2.8.10
  GnuTLS:         2.6.4

Increasing the multiple file transfer limit did not do anything until I restarted the FileZilla client.

Steps to reproduce:

• Start with multiple file transfer limit of 2 (defauly settings)
• Place items from FTP server into queue
• Increase the multiple file transfer limit to 10
• Process queue

The queue will only have 2 simultanious file transfers.

• Stop queue processing
• Restart FileZilla Client
• Process Queue

The queue will not have 10 simultanious file transfers.

Uploading a large 3GB data file, filezilla starts with nominal CPU usage. However, the CPU occupancy continually increases during file transfer. After about 5 minutes of transferring the CPU occupancy is about 80% and after approximately 10 minutes it is at 98%. Log files attached. Unfortunately, I was not able to capture the console output when it was at 98% as filezilla was no longer responding.

Filezilla client connecting to AIX server via secure FTP shows the wrong year (2006) on certain files and directories. Those files and directories were created when the system date was rolled to test DST (from 02/27/2007:14:05:00 to 3/11/2007:01:00:00). The time then rolled at 01:59:59 to 03:00:00. Files created previous to DST rollover still show correct year. New directories dated after date/time was rolled back (to 02/27/2007:{current_time}), show the correct year if some files in it have a 2007 year (because files/directories were created before the DST time change).

An earlier reported bug may be related (1608370 "Year bug") but is not the same. When files are seen via another FTP client ("SecureFX") or with another telnet program ("PuTTy" or "SecureCRT" terminal), the year IS correct. So far, only Filezilla shows the anomaly.

When browsing our SFTP server using filezilla v3.8.0 on Windows the year in the modified date field is showing as 2014 when the correct date is actually 2013. I have confirmed the date is correct on the actual file and by browsing using Cyberduck and the date s only wrong when using filezilla.

I use the FileZilla client to both place and retrieve files on a secure server.

The client is changing the YEAR portion of the timestamp on files from 2014 to 2013.

I have my settings to "preserve timestamp" and the month, day and time remain correct, but the YEAR is changed from 2014 to 2013.

When I transfer a file from my network location to the server, the YEAR changes to 2013.

When I transfer a file from the server to my network, the same thing happens.

DISPLAY observations:

When I simply VIEW files newly placed on the server by a sender other than myself, in FileZilla the YEAR appears changed to 2013. However, when I VIEW that same file on the server with a different FTP tool (such as WinSCP) the YEAR on the file correctly appears as 2014.

Files on my own network that I simply VIEW in FileZilla remain unchanged with the correct 2014 YEAR. The YEAR on my files changes from 2014 to 2013 when I transfer to the server side using FileZilla.

This is NOT solely a display issue, because on files I transfer off the server to my network, the YEAR is actually changed on the file timestamp.

FileZilla Client Version Information:

Version: 3.9.0.3

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2014-08-13 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.2 GnuTLS: 3.2.16 SQLite: 3.8.4.3

Operating system:

Name: Windows 7 (build 7601, Service Pack 1) Version: 6.1 Platform: 32 bit system

Using FileZilla Client 3.2.3-rc1

When connected to an ftp site, I clicked on the "Last Modified" column header in the Remote Site window. Files are *not* sorting correctly by Last Modified Date (whether ASC or DESC is irrelevant).

Attached image shows files obviously NOT sorted in descending order from Most to Least recent by Last Modified Date

When dragging files and folders to new locations, they are copied if going between a remote and a local site, or moved if staying within the same site. However, the icon always indicates that the file will be copied, even when it is actually being moved.

The inexistent folder "Feb 29 13:59 Giochi" is shown in the folder list of the remote FTP site instead of the existing one "Giochi". The error occurred for the first time in the last but one version of the filezilla client program. The only way for accessing it is to rename the inexistent folder into "Giochi". This folder contains 129 files and 47 folders. Other FTP programs (like Internet Explorer) shows and handles the folder normally.

There seems to be a issue if a filename starts with a space character (or multiple spaces). The FTP client will trim out all spaces from a filename and display the rest of its string (this can also be a issue with a space as the last character)

I've discovered this after some users reported that they can't delete there own files (They have full read/write access) and the message was that "550 The system cannot find the file specified.".

So I've start investigating the issue and with multiple FTP clients: WinSCP, FileZilla, Total Commander, etc... All with the exact problem. The file can't be renamed/deleted/open/etc. The server is a "Microsoft FTP Service - Windows 2008 R2" which seems to accept filenames starting with one or multiple space characters :(

Command:	DELE A D R E S A      Document1.doc
Response:	550 The system cannot find the file specified.

Command:	RNFR A D R E S A      Document1.doc
Response:	550 The system cannot find the file specified.

I know, is one of the weirdest names I've seen so far....

So, to solve this I've used old school FTP command line

ftp> o my.ftp.server
Connected to my.ftp.server.
220-Microsoft FTP Service
[...]
230 User logged in.

ftp> cd file/path
250 CWD command successful.

ftp> dir
200 PORT command successful.
125 Data connection already open; Transfer starting.
02-27-17  07:54AM               544768  A D R E S A     Document1.doc
02-27-17  08:45AM               753624  A D R E S A     Document2.doc
226 Transfer complete.
ftp: 119 bytes received in 0,00Seconds 59,50Kbytes/sec.

ftp> delete "A D R E S A     Document1.doc"
550 The system cannot find the file specified.

ftp> mdelete *
200 Type set to I.
mdelete  A D R E S A     Document1.doc? yes
250 DELE command successful.
mdelete  A D R E S A     Document2.doc? no

ftp> delete " A D R E S A     Document2.doc"
250 DELE command successful.

So, by using a buggy FTP server witch accepts unusual filenames (starting with space characters) combined with weird people writing those names the result is no more access to those files anymore.

Please redesign the filename parsing for "LIST" command, so it will accept those anomalies.

This is issue only happens when moving directories on the remove server.

Directory/File Structure: root root/app root/magento root/magento/app root/magento/app/file.txt

When I click-and-drag the root/magento/app directory up 1 level into root, I would expect the root/app directory to contain file.txt. Instead, FZ is nesting the app directories so I have root/app/app/file.txt.

This is easily reproducible and I do not believe it is intended behavior.

Makes magento/extension upgrades very difficult and just destroyed my dev site.

FileZilla is overriding system preferences (Win 8.1 Pr 64)and using month/day/year rather than day/month/year. Started in 3.9.0 and is in current build 3.9.0.1

When selecting files in directory tree with horizontal scroll, the cursor sharply moves to the corner of the screen or selection moves very slowly.

When there is no horizontal scroll - everything works fine.

This bug appeared in recent versions.

1 On OS X only, connect to FTP, go to a folder with files on the server.

2 Press Cmd-A to select all files on ftp server > count shows total number and total size.

3 Click 1 file > makes 1 file showing as selected, but selection count is not updated, still shows total count, incorrect.

4 Continuing now with a multiple selection (using Cmd key) makes it even more messy, the count is increasing or decreasing depending on whether you click above or below a selected file.

The Progress bar shows an incorrect status while downloading Files. The Downloaded Data Counter also excedes the File Size in the process. Please See the attached screenshot!

Hi. When viewing remote files over 4GB (4,294,967,296), the high-order 32-bits of the 64-bit size is truncated. Hence, a file with a size of 4,973,821,282 appears as 678,853,986. This is in the Remote Site window.

When connecting to a FreeBSD inbuilt ftpd (standard Berekeley release, version 6.00LS) using a password which was "29fr*2" (without the quote marks), FileZilla was unable to connect. This was when the connection was specified in the Site Manager.

However, entering the username and password in the format "user:pass@site" in the QuickConnect address bar did work.

I tried this a number of times, with version 2.2.17 and it happens every time.

I've uploaded a lot of files with the form a001.htm A001.htm a002.htm A002.htm etc

In the file list in the remote site window the order of the files is neither consistnet nor is it in strict alphanumeric order.

I would expect the lower case version of each pair to appear first, it does not.

Clicking the header to reverse the sort and then reverse it again does not affect the presented order.

The original file I'm uploading has a file size of 603,953. The uploaded file size is 69.098.

The file is an html file. It has a few lines of text but the main portion of the file is a series of 6 lists that are copied and pasted from an Excel file. After uploading the lines of text are there but the lists copied and pasted from Excel are missing.

I'm not sure whether this bug is reporting directory listing failures on client-local or server directories, but I'm seeing a very abbreviated server directory listing for one of my server directories.

I can see them all fine by logging in to the server via Putty, and I can't see any variation in the permissions that would prevent the listing.

Curiously, of the directory and files that are listed, only one of them actually exists on the server, all the ones from the synchronized client listing (which is accurate) also appear in the server listing (those include the one listed that actually exists on the server), and then there are two listed in the server listing that do not exist on either side.

This seems like a quite serious bug, disabling FileZilla when the bug is triggered. I have no idea what triggers it, not all directory listings seem as incomplete as this one I was trying to access today.

FileZilla Client

Version: 3.56.2

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2021-10-27 Compiled with: x86_64-w64-mingw32-gcc (GCC) 10-win32 20210110 Compiler flags: -O2 -g -Wall -Wextra -Wno-deprecated-copy -ffunction-sections -fdata-sections -Wno-cast-function-type

Linked against:

wxWidgets: 3.0.6 SQLite: 3.35.5 GnuTLS: 3.7.2

Operating system:

Name: Windows 10 (build 19042), 64-bit edition Version: 10.0 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi bmi2 adx lm Settings dir: C:\Users\glenn\AppData\Roaming\FileZilla\

Windows XP with snd service pack installed. FileZilla 3.2.0

I want to delete a Web site on the Remote Site. I right click the main directory and click delete. Message pops up, "Really delete all selected files and/or directories?" I respond "yes" The following appears in the Message Log area.

Command: CWD /webdocs/Guerrant Springs/Pictures and Directions_files Response: 250 CWD command successful. Command: PWD Response: 257 "/webdocs/Guerrant Springs/Pictures and Directions_files" is current directory. Command: RMD _vti_cnf Response: 550 _vti_cnf: File exists Command: CWD /webdocs/Guerrant Springs Response: 250 CWD command successful. Command: RMD Pictures and Directions_files Response: 550 Pictures and Directions_files: File exists Command: CWD /webdocs Response: 250 CWD command successful. Command: RMD Guerrant Springs Response: 550 Guerrant Springs: File exists Status: Retrieving directory listing... Command: PASV Response: 227 Entering Passive Mode (207,217,98,200,160,219). Command: LIST Response: 150 Opening ASCII mode data connection for file list Response: 226 Transfer complete. Status: Directory listing successful

However, the main directory, a sub directory and a subdirectory to the sub directory remain. These directories have no files contained in them.

Trying to delete each directory does not work. From the Message Log when trying this:

Command: CWD /webdocs/Guerrant Springs/Pictures and Directions_files Response: 250 CWD command successful. Command: CWD _vti_cnf Response: 250 CWD command successful. Command: PWD Response: 257 "/webdocs/Guerrant Springs/Pictures and Directions_files/_vti_cnf" is current directory. Command: PASV Response: 227 Entering Passive Mode (207,217,98,200,167,169). Command: LIST Response: 150 Opening ASCII mode data connection for file list Response: 226 Transfer complete. Status: Directory listing successful Command: CWD /webdocs/Guerrant Springs/Pictures and Directions_files Response: 250 CWD command successful. Command: RMD _vti_cnf Response: 550 _vti_cnf: File exists Status: Retrieving directory listing... Command: PASV Response: 227 Entering Passive Mode (207,217,98,200,167,171). Command: LIST Response: 150 Opening ASCII mode data connection for file list Response: 226 Transfer complete. Status: Directory listing successful My email is dnsmithnc@… if you have any further questions. Thank you

Limited usability issue for users with many files:

Summary: When listing a directory it seems there is a limit of 2000 items Filezilla will display at a time. This affects at least versions 2.x through the lastest 3.0.1.

Reason for conclusion: I have a directory with maybe 2,200 files or so. When using my cpanel file manager I can see the last 200+ files but can't see them through filezilla. In my case I have 2 subdirectories in this directory. Filezilla displays the ".." up directory, my two subdirectory, then 1997 files, for a total of 2000 items in view.

Alternative fix: If this is a desired limit for security or possible bug problems, maybe there could be an option in settings that allows a person to override this max limit with a user entered max number of listings. This would allow those like me who keep huge listings of files to continue to use this excellent FTP program.

Thanks, Nick

Is there any chance that the focus issues discussed in 1473638 will ever be resolved? It looks like this item has been pending for over a year now. There've been several releases since then, but it doesn't seem as if this problem has been addressed. I understand that there are other issues still pending besides this one, but I'm raising this one again specifically because it makes the program occasionally inaccessible to users like myself who are visually impaired and rely on screen reading software.

Hello,

Connecting to ProFTPD with FileZilla (all platforms), we have run into a connection error that only affects keyboard-interactive authentication. Doing a git bisect on the PuTTY sources (which are utilized by FileZilla), we found that the problematic commit exists between PuTTY 0.70 and 0.71, and is precisely due to PuTTY commit 20a9bd5642ac66ae1190069989d33c5fcefe5672 ( ​https://git.tartarus.org/?p=simon/putty.git;a=commit;h=20a9bd5642ac66ae1190069989d33c5fcefe5672 ) from July 9, 2018. We have tried various PuTTY versions after the problematic commit, including head, and still have the problem connecting to ProFTPD. We have also tried upgrading ProFTPD to 1.3.7rc1, 1.3.7rc2, and the latest head, and the problem still persists when connecting to it with anything higher than FileZilla 3.46.0 or PuTTY 0.70 (testing done with psftp).

The error message that is returned is the following (this output is from psftp, but the same error comes through with Filezilla 3.46.1 and higher):

Keyboard-interactive authentication prompts from server:
| Password: 
End of keyboard-interactive prompts from server
Access denied
FATAL ERROR: Remote side sent disconnect message
type 11 (by application):
"Unsupported protocol sequence"

For now, we have informed those accessing our systems to do one of the following workarounds:

1.) Roll back to FileZilla 3.46.0 or older (or PuTTY 0.70 or older if utilizing psftp) 2.) Use public key authentication via Pagent or saved key file within FileZilla 3.) Ensure PuTTY is installed, and uncheck the checkbox for 'Attempt "keyboard-interactive" auth (SSH-2)' under SSH->Auth so the connection falls back to password auth. Make sure to save this change to the Default Settings connection profile within PuTTY. 4.) Use a different SFTP client that is not affected in this way.

In summary:

A change in PuTTY at commit 20a9bd5642 resulted in an inability to connect to ProFTPD that wasn't previously present. Since FileZilla relies on the PuTTY libraries and those were recently upgraded for FileZilla version 3.64.1, this problem has now presented itself. It isn't clear (to me) if this is a bug in PuTTY itself or ProFTPD, but I thought I would start with filing a bug here to get started, since FileZilla is used heavily by those accessing our systems, and this problem will become quite problematic as more and more people upgrade their FileZilla clients.

(Also, I saw bug #12066, but have not been able to reproduce that issue on my end. I suspect that issue has to do with pulling in PuTTY changes, but may not be due to the exact commit mentioned in this ticket.)

Thank you for your assistance.

If needed, we have a test environment we can provide to the FileZilla team for troubleshooting/testing purposes.

In the transfer queue, if I rearrange the columns during a transfer, the direction arrows don't follow the source -> destination.

In the attached screenshot, I'm downloading files but, after rearranging the columns to match where I have my Remote and Local views, the arrows in the "Direction" column make it look like I'm uploading.

Love the program! Thank you!

Once I upgraded to 3.9.x on my mac I can no longer copy and paste from/to site directory bars [i.e. where local site: / remote site: are]. Previously keyboard shortcuts [i.e <ctrl>+c and <ctrl>+v] would allow you to copy and paste there.

This seems like a bug that was introduced recently.

If files are represented by soft-links on the server side, filezilla will create local directories with the name of the soft-link and the target file inside it.

The issue can be reproduced using the IBM's Fixcentral FTP server.

FTP server: delivery04-mul.dhe.ibm.com User ID: anonymous Password: Send any password Directory: /ecc/hsb/H23564754

FileZilla Client

Version: 3.3.4.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2010-08-16 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.11 GnuTLS: 2.8.3

Operating system:

Name: Windows XP (build 2600, Service Pack 3) Version: 5.1 Platform: 32 bit system

WAIT, don't just close this, I know this is due to bugs on servers. Please read on.

I know that the "Server did not properly shut down TLS connection - ECONNABORTED" issue is caused by servers with bugs that create a security vulnerability. However, for those of us who LOVE FileZilla as a client, but don't have any control over the server we connect to, this issue renders FileZilla completely useless to us until the admins on the servers we connect to get their at together and fix/update their servers.

In the mean time, I think it would be a good move for FileZilla to allow servers with this problem, but treat the issue as a "WARNING" rather than an error that makes the FileZilla client useless.

Thanks,

-S

Status: Resolving address of ftp.centreparamita.org Status: Connecting to 67.205.22.147:21... Status: Connection attempt failed with "ETIMEDOUT - Connection attempt timed out". Trace: CRealControlSocket::OnClose(10060) Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Error: Could not connect to server Status: Waiting to retry... Status: Delaying connection for 1 second due to previously failed connection attempt... Status: Resolving address of ftp.centreparamita.org Status: Connecting to 67.205.22.147:21... Status: Connection attempt failed with "ETIMEDOUT - Connection attempt timed out". Trace: CRealControlSocket::OnClose(10060) Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Error: Could not connect to server Status: Resolving address of ftp.centreparamita.org Status: Connecting to 67.205.22.147:21... Status: Connection attempt failed with "ETIMEDOUT - Connection attempt timed out". Trace: CRealControlSocket::OnClose(10060) Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of ftp.centreparamita.org Status: Connecting to 67.205.22.147:21... Status: Connection attempt failed with "ETIMEDOUT - Connection attempt timed out". Trace: CRealControlSocket::OnClose(10060) Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Error: Could not connect to server Status: Resolving address of ftp.centreparamita.org Status: Connecting to 67.205.22.147:21... Status: Connection attempt failed with "ETIMEDOUT - Connection attempt timed out". Trace: CRealControlSocket::OnClose(10060) Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of ftp.centreparamita.org Status: Connecting to 67.205.22.147:21... Status: Connection attempt failed with "ETIMEDOUT - Connection attempt timed out". Trace: CRealControlSocket::OnClose(10060) Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Error: Could not connect to server

Since the last version I can't edit files when I double clic on a file in the "server" columne. Before the last version I had no problem. It seems that the file is download but the associated program is don't launched, I have try to force the association for files with no success.

Hi there,

I think it's a bug: it's impossible to change directory by clicking the folder if it contains one or more trailing spaces.

Example :

Thank you.

550 Le temps d une paix, Coffret 1 - DVD 1 - 480p DVDRip x264 - {Houston035} : Directory not empty , je suis incapable de supprimer

Svp j'ai besoin d'aide

Je vous remercie

I have Filezilla 3.10.1.1 When I try to connect to some server appear this message:

Status: Resolving address of server02.4more.it Status: Connecting to 46.16.88.36:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (46,16,88,36,105,69) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

This error appear for EVERY server... But when i try to connect with Filezilla 3.9.0.6 nothing error appear and i can work in FTP.... WHY?!

Using most recnt client at this writing (3.3.2.1) I have previously and successfully transferred files to my cox.net host space. Today, whether it was a jpg, png, bmp, gif, or pdf the transfer went without error and in a proportionate amount of time for the file size, but on the host all times but one they appeared as zero bytes and were not usable. One time they filled in with the appropriate host file size, but were found to fail to display, and on refresh were zero bytes after all. I didn't try non-image file types so they may have had the same problem. I tried this multiple times in multiple sessions and after restarts. I also changed from AUTO to Binary, and turned passive on/off with no change in outcome.

I upload new images to my web site and for the past few months new images appear on the incorrect page. I use Microsoft Frontpage and that is all I use for the web site. I delete incorrect images and try over but they keep getting mixed up and loaded onto incorrect pages

I was using filezilla to upload some images for my website's background. They are my desktop's wallpaper, and so I thought they would be perfect for my site as well. However, every time I upload any of my wallpaper images, they become corrupt on my server.

I have been able to upload countless other images and files with 0 problems. I cannot fathom what or how these images differ from any other images. I have changed the image type (.jpg to .png), I have tried resizing them to be smaller (from 1920x1080 to 1280x720 and 300x400), to no avail. I have also tried several of my wallpaper images and they all become corrupt on my server using filezilla. I know it is not my server because using my cpanel's upload tool, the images uploaded fine to the same place, with the same other details.

I will attach 2 of my images that corrupt every time I upload.

I have switched to using ftpes with a server I connect to very often. I connect, can upload etc but all of a sudden, I see this in the logging: 09:32:01 Opdracht: PORT 192,168,188,31,252,91 09:32:01 Antwoord: 500 Illegal PORT command 09:32:01 Opdracht: PASV 09:32:01 Antwoord: 227 Entering Passive Mode (212,26,193,125,235,92). 09:32:01 Opdracht: MLSD 09:32:01 Antwoord: 150 Opening ASCII mode data connection for MLSD 09:32:01 Antwoord: 425 Unable to build data connection: Operation not permitted 09:32:01 Fout: Ontvangen van mappenlijst is mislukt

The ftp server has an IP in the 212 range so it is not local, the PORT command is something local but gets an 'Illegal PORT command' as response. Connection is then lost and I need to disconnect and reconnect to proceed.

Disclaimer: This is very similar to tickets ​4204 and ​7340, which both got rejected.

I've just tried using FileZilla v3.10.2 to connect to ftp.cisco.com

When I run nslookup, it says:

Non-authoritative answer:
Name:    ftp.cisco.com
Addresses:  2001:420:1101:9::a
          72.163.7.54

FileZilla then says:

Status:	Resolving address of ftp.cisco.com
Status:	Connecting to [2001:420:1101:9::a]:21...
Error:	Connection timed out after 20 seconds of inactivity
Error:	Could not connect to server
Status:	Waiting to retry...
Status:	Resolving address of ftp.cisco.com
Status:	Connecting to [2001:420:1101:9::a]:21...
Error:	Connection timed out after 20 seconds of inactivity
Error:	Could not connect to server

I am using IPv4 and IPv6 on my internal network, but I don't have IPv6 internet access (yet). By contrast, www.cisco.com currently has 3 addresses: 2a02:26f0:ca:286::90 2a02:26f0:ca:290::90 23.195.11.243

I can connect to that website, because the web browser (IE/Firefox) realises that the IPv6 address is inaccessible and so it uses IPv4 instead. I think that FileZilla should behave the same way for FTP sites.

As a workaround, I typed in the IPv4 address for ftp.cisco.com (72.163.7.54) and then FileZilla connected successfully.

I do not remember which one, but one old version of FileZilla Client came with new fashioned icons (as seen in FileZilla web site). Where they are? When I installed FileZilla Client, I checked to install new icons, but I don't get them. Is this right or there is a bug when updating icons if you have installed a very old version? I tried to uninstall FileZilla completely, deleting all files under c:\program files\FileZilla FTP Client, reboot my PC and installa again; but the old icons remain.

When I open the program, the title bar is too far into the mac os program bar, that none of the icons are visible in 16x16 mode, nor is the window able to be moved.

Good Day All:

I am finding that these icons (Open Site Manager, etc.) keep disappearing when moving in and out of the Filezilla windows. They only reappear when I mouse over where they used to be. Is there any way to make them stay visible continuously? Thanks!

In FZ 3.3.3 (and former versions) the icons for "directory listing" and "directory comparing" are inverted.

Steps to reproduce:

• Run FileZilla
• Connect to an FTP server
• Upload anything (now systray icon appears)
• Exit FileZilla

Ooops... icon in systray stil exists and disappears only after hovering mouse over it. Taskmon shows that FileZilla already unloaded and not running.

It starts after upgrading to 3.65.0 (from 3.64.x I suppose) and still exists on 3.66.1.

ver 3.1.3 for power pc is having startup issues.

It stops responding for a while then finall starts up. There are no error messages.

This definitely changed from 3.12

Using FileZilla 3.2.4.1 in WinXP(SP3). I'm connecting to site (MVS z/OS) to retrieve a file. This file contains Norwegian characters (Ö,Ü & Ä) being converted to junk values after FTP with FileZilla Client. In DOS scripts, its not changed due to "Quote site SBDATACONN=(IBM277,ISO8859-1)" command. I've tried similar charsets(ISO8859-1,CP1250, windows-1250 etc) in FileZilla but it still fails. Please investigate.

I entered an IPv6 address into the host block and it gives me the following error: Could not parse server address: Invalid Port given. The port has to be a value from 1 to 65535.

I verified that my address was valid by pinging the address with the -6 switch to force IPv6. Received replies back.

Tried with port blank and set to 21. Get the same results.

Set debug level to 3 but don't see any logs, probably because it never connected.

I entered an IPv6 address into the host block and it gives me the following error: Could not parse server address: Invalid Port given. The port has to be a value from 1 to 65535.

I verified that my address was valid by pinging the address with the -6 switch to force IPv6. Received replies back.

Tried with port blank and set to 21. Get the same results.

Set debug level to 3 but don't see any logs, probably because it never connected.

On IIS 2008 R2, with an SSL connection, with PCI compliant ciphers only, a variety of broken and dropped errors occur.

Server set to PCI compliant ciphers only (RC4 128, 3xDES 168, AES 128, AES 256).

On v3.6.0.2: wont connect at initial start up; server drops the connection with this error: An TLS 1.2 connection request was received from a remote client application, but none of the cipher suites supported by the client application are supported by the server. The SSL connection request has failed. i.e. no matching Cipher.

Note on 3.6.0.2, if we allow the non PCI ciphers, it does connect, but, then fails on upload transfers, with "invalid transfer" message in the log (i don't know which cipher its selected).

On older 3.53; with the AES ciphers in the top of the list, it will connect, but fails the file upload transfer. With RC4 cipher as the first choice (beast ordering), it fails outright and never connects.

Hello team!

I really need your advice and detailed answer to my questions. I have downloaded your software but please tell me what ftp data I need to have for usung your program? When I put our ftpXXX.XXX.XX.XX address I don't receive the access to the server! Is it a local ftp? What kind of ftp is required?

I'm looking forward to hearing your instructions. Any help will be appreciated.

Sincerely, Irene

Hi, It is the second time when I have an update of your software (last one was for the version 3.35) and now for the version 3.37. I have no more your software when the update is begun, I obtain the following error message: (can' t write: C:\Programme Files\FileZillaFTP Client\filezilla.exe). What is the problem and it would always be the case in the future?

I have the latest version of Filezilla. Virtually every time I upload files (50mb+) I get the following message in the top window:

Status: Connected Status: Starting upload of C:\Documents and Settings\James Kay\My Documents\PHOTO - IMAGE FILES\TEMPORARY FOLDER\Sundance\Sundance Final 3\67-UT-WS-0110.tif Command: CWD /home/ftp/pub/users/j/jameskay/outgoing Response: 250 CWD command successful Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (198,60,22,77,144,185). Command: STOR 67-UT-WS-0110.tif Response: 150 Opening BINARY mode data connection for 67-UT-WS-0110.tif Response: 421 No Transfer Timeout (600 seconds): closing control connection. Error: Disconnected from server: ECONNABORTED - Connection aborted

It tells me that I've been disconnected but the files still seem to be uploading with the progress bar. Why do I keep getting this message?

Hi, This is my log: Statut : Résolution de l'adresse de admin.cana-com.com Statut : Connexion à 74.208.113.48:21... Statut : Connexion établie, attente du message d'accueil... Réponse : 220 ProFTPD 1.3.3c Server (ProFTPD) [74.208.113.48] Commande : USER cana-com Réponse : 331 Password required for cana-com Commande : PASS Réponse : 230 User cana-com logged in Commande : OPTS UTF8 ON Réponse : 200 UTF8 set to on Statut : Connecté Statut : Récupération du contenu du dossier... Commande : PWD Réponse : 257 "/" is the current directory Commande : TYPE I Réponse : 200 Type set to I Commande : PASV Réponse : 227 Entering Passive Mode (74,208,113,48,155,102). Commande : MLSD Erreur : Délai d'attente expiré Erreur : Échec lors de la récupération du contenu du dossier and thank you in advance.

I am using 64 bit processor system and facing this problem

Status: Connecting to 50.62.160.55:21... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server Status: Waiting to retry... Status: Connecting to 50.62.160.55:21... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server

If I try to connect through site manager i get the following errors

Status: Resolving address of heatingnation.net Status: Connecting to 66.96.147.103:80... Status: Connection established, waiting for welcome message... Error: Connection timed out Error: Could not connect to server

if i try to connect through quick connect i get the following errors

Response: 220 Ipage FTP Server ready Command: USER heatingnationnet Response: 331 Password required for heatingnationnet Command: PASS * Response: 530 Login incorrect. Error: Critical error Error: Could not connect to server

Status: Resolving address of www.aworldofsoftware.zxq.net Status: Connecting to 67.220.217.235:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 223 of 500 allowed. Response: 220-Local time is now 13:54. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 2 minutes of inactivity. Command: USER www.aworldofsoftware_zxq Response: 331 User www.aworldofsoftware_zxq OK. Password required Command: PASS Response: 530 Login authentication failed Error: Critical error Error: Could not connect to server

Response: 227 Entering Passive Mode (199,190,235,20,9,222) Command: STOR 08112014 WITH T1019.txt.gpg Response: 550 08112014 WITH T1019.txt.gpg: Permission denied on server. (Filename (accept)) Error: Critical file transfer error Status: Disconnected from server

Keep showing this, when I'm turn off the firewall or on.

FileZilla Client

Version: 3.24.0

Build information:

Compiled for: x86_64-apple-darwin16.3.0 Compiled on: x86_64-apple-darwin16.3.0 Build date: 2017-01-13 Compiled with: Apple LLVM version 8.0.0 (clang-800.0.38) Compiler flags: -Werror=partial-availability -Wall -g -std=gnu++14

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.4.16 SQLite: 3.16.2

Operating system:

Name: Mac OS X (Darwin 16.4.0 x86_64) Version: 10.12 CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi2 bmi2 adx Settings dir: /Users/erhanyasar/.config/filezilla/

Here above the information FileZilla provides and I can't just reach to my ftp even I can reach on my hosting provider company's GUI.

I am putting my usual password and username but i am unable to log in but getting the following message:

Response: 530 Login authentication failed Error: Critical error: Could not connect to server

I am using FileZilla 2.2.28.

I can't get file listing when filename of some files has space char in the listing directory. Does any met this problem?

Hi there, I hope it's not an already treated topic but here's my issue :

I got 2 files on my sftp server I can't download : indexeng.html & indexesp.html.

there's a red message saying : Erreur :/indexen.html: open for read: no such file or directory Erreur :Échec du transfert du fichier

Both files can be upped but not downloaded back.

Is an "e" as 6th type just after "index" chain could be a problem ? Note that I got other files named indexit.html, indexheb.html etc... showing no problem.

Is there a solution someone may give me ?

Thanx anyway for your help

Laurent

I am using a windows ftp server for uploading my files. I can't able to download files from server to my local machine.

Secondly, back to folders not working properly. In my Remote Site bar always there '\' after the path, it may be more than one in some cases. eg: C:/home/data/\

Thanks

Filezilla does not connect to my ftp server.

Can anyone tell what's wrong? I'd like to use FileZilla rather than the other methods.

log is:

Status: Connecting to 198.46.81.217:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 90 of 150 allowed. Response: 220-Local time is now 08:07. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 30 minutes of inactivity. Command: AUTH TLS Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server

I can't connect to all of my servers with FileZilla since today, I have an error "Data connection cannot be established: WSAEADDRNOTAVAIL - Unable to assign the requested address"

Please, could you help me?

PS. I use Vesta control panel - I install it before trying to connect with FileZilla

Logs: =============================================== Status: Connecting to *MY HOST*... Status: Connection established, waiting for welcome message... Status: Insecure server, it does not support FTP over TLS. Status: Logged in Status: Retrieving directory listing... Command: PWD Response: 257 "/" Command: TYPE I Response: 200 Switching to Binary mode. Command: PASV Response: 227 Entering Passive Mode (136,244,116,96,47,48). Command: LIST Error: The data connection could not be established: WSAEADDRNOTAVAIL - Cannot assign requested address Response: 150 Here comes the directory listing. Response: 226 Directory send OK. Error: Failed to retrieve directory listing

Hello i can no longer access my account; at the connection, the user name is accepted, but with the password, that remains frozen, and then i displays the following message: "Resolution of the address of abderrezak.freehost10.com Status: "Resolution of the address of abderrezak.freehost10.com Status: Connecting to 74.63.216.132:21... Status: connection is established, awaiting the welcome message... Answer: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Answer: 220-You are user number 40 of 50 allowed. Answer: 220-Local time is now 05:37. Server port: 21. Answer: 220-This is a private system - No anonymous login Answer: 220-IPv6 connections are also welcome on this server. Answer: 220 You will be disconnected after 15 minutes of inactivity. Commande: USER abderrezak Réponse: 331 User abderrezak OK. Password required Commande: PASS * Réponse: 530 Login authentication failed Error: impossible to establish a connection to server."

And I have not changed my password; that is what I do? Thank you. For your information, i have uploaded with this account my database please, help me

I can not see .jar files on the server that i am connected to. i can only see the folders and the files that are inside of them.

Thx

Hi, It accepts the login & password, but then hangs on command MLSD

I can not delete folder.How can I deleteit?

Hello guys,

This week I started having access problem with my FileZilla where it showed me a network error message (​https://screenshot.net/pt/dn369an). I have checked my server access data several times and they are correct. Check my direct access to the server and they are accessing normally. It only started giving trouble when trying to access via FileZilla.

Now, it just not show any more messages (​https://drive.google.com/file/d/0B-3bBaQBNJ0mV2Q3RUJlenFGT3U3Z2tFaHdfd3pINmlzRDdV/view). I try to access, just as I always did, but nothing happens.

Please, could you help me?

Appreciate, Rodrigo Carlos

The update never gets placed in the Temp directory for the update. It's been doing this for a month now, below is the log for the error.

Ross Waters Order Number: UEEDTH5H Purchase date: 8/12/2017 2:34:37 PM

Started update check on 2018-04-01 12:15:16 Own build type: official Downloading /update.php?platform=x86_64-w64-mingw32&version=3.30.0&product=3&osversion=10.0&osarch=64&cpuid=sse,sse2,sse3,ssse3,sse4.1,sse4.2,aes,pclmulqdq&initial=0 Resolving address of update.filezilla-project.org Connecting to 136.243.154.122:443... Connection established, initializing TLS... Verifying certificate... TLS connection established, sending HTTP request File transfer successful, transferred 370 bytes in 1 second Parsing 370 bytes of version information. Found new release 3.31.0 Downloading /FileZilla_Pro_3.31.0_win64-setup.exe Resolving address of download.filezilla-project.org Connecting to 136.243.154.86:80... Connection established, sending HTTP request Resolving address of download.filezilla-project.org Connecting to 136.243.154.86:443... Connection established, initializing TLS... Verifying certificate... TLS connection established, sending HTTP request Resolving address of prodownload.filezilla-project.org Connecting to 136.243.154.86:443... Connection established, initializing TLS... Verifying certificate... TLS connection established, sending HTTP request File transfer successful, transferred 8,215,064 bytes in 7 seconds Local size of 'C:\Users\ross\AppData\Local\Temp\fzupdate_93adc1780c61322a.tmp' does not match expected size: 0 != 8215064

I am using Filezilla Version 3.8.1. I have been using your product for years without any problems. Now, I cannot connect to the Net. I continuallly get Server Timed Out messages.

I would appreciate you help on this matter,

Steven Scott

Evry time I try to upgrade to the latest version I get "Timer Creation Failed. This has been happenening for evry update I try

We have hundreds of enterprise customers worldwide testing our products early while they are making purchase decisions and they need the drivers that we host on our FTP site.

Status: Insecure server, it does not support FTP over TLS. Command: USER mirprepmain Response: 331 Password required for mirprepmain. Command: PASS Response: 530 User mirprepmain cannot log in. Error: Critical error: Could not connect to server

Status: Insecure server, it does not support FTP over TLS. Command: USER mirprepmain Response: 331 Password required for mirprepmain. Command: PASS Response: 530 User mirprepmain cannot log in. Error: Critical error: Could not connect to server

I'm using FileZilla v3.0.7.1 from PortableApps and I don't know if this is a bug or just a cofiguration issue but it's worth mentioning it.

The SiteManager looks as the sites were safe, but they aren't. FileZilla saves the site from SiteManager in a configuration file called sitemanager.xml (a plain text file containgin some xml formatted data).

(In previous versions the sites where contained inside the settings.xml) In FileZilla v2.x the passwords for the sites where encrypted with some sort of algorithm, but as I checked the sitemanager.xml file I discovered that the passwords are saved in plain text. Well this is a very huge security issue as gaining access to the xml will reveal the passwords of the server.

Is this how FileZilla works? Are there future plans to secure the sites stored in the sitemanager.xml file?

Which ports does FileZilla Client use ?

I use FileZilla_Server-0.9.11

IP Sharing Device open and port mappgin TCP 21,20, UDP 21,20

On Windows XP:

FileZilla Client 2.2.22 FileZilla Client 2.2.24a login OK, "list directories and files" failed

FTP on "Command Prompt of Windows XP" Everything OK !

LeechFTP 1.3 Build 207 ​http://stud.fh- heilbronn.de/~jdebis/leechftp/downloads.html Everything OK !

FTPX 1.00 ​http://www.ftpx.com/ Everything OK !

IP Sharing Device open DMZ

FileZilla Client 2.2.22 FileZilla Client 2.2.24a Everything OK !

Does FileZilla Client use more ports than TCP 20,21, UDP port 20,21 ?

How to use ports aboud FileZilla Client ?

You want to get back the guy you love. You must find the best solutions on ​| how to get your ex boyfriend back. Through the solutions that you have in your mind you can start or begin to get your ex boyfriend back. You need to consider the best ways to get him back so that you make sure that you can get him back and you will be on his life.

There are best things that you need to do on ​| how to get your ex boyfriend back how to get your ex boyfriend back]. If you will do these things you can be surely achieve the positive result and you can get ack your ex boyfriend. Then, you can start again with new memories and this time you and your exboyfriend are now careful in handling your relationship.With this you know already that you can handle the other problems that both of you might encounter in your relationship.

You want to get back the guy you love. You must find the best solutions on ​how to get your ex boyfriend back. Through the solutions that you have in your mind you can start or begin to get your ex boyfriend back. You need to consider the best ways to get him back so that you make sure that you can get him back and you will be on his life.

There are best things that you need to do on ​how to get your ex boyfriend back. If you will do these things you can be surely achieve the positive result and you can get ack your ex boyfriend. Then, you can start again with new memories and this time you and your exboyfriend are now careful in handling your relationship.With this you know already that you can handle the other problems that both of you might encounter in your relationship.

Since version 3.9.0.2 (on Mac OS X) FZ automatically actives "Host" input in the upper area of screen. That's disturbing, because I need to select manually files with mouse. In previous versions I just tapped enter and file uploaded. Thanks!

we use Filezilla Version 3.3.1 and a generic proxy with socks 5 (dante). the problem is, that the servername will be cut after the 16. character. when we try to connect "emma.tv5paris.org" we get the messages "Could not connect to server" in Filezilla and in the dante-logfile we find "Jan 26 14:48:58 (1264513738) danted[8539]: sockshost2sockaddr(): gethostbyname(emma.tv5paris.or): Unknown host".

If you want to get a home loan then what you will need to do is approach a ​home loan broker. There should be a broker or an agency that handles home loan for you. If you think that looking for a good broker to loan you money for the property you want to buy is very hard to look for, then why not go online and search for a really good broker there. There should be hundreds of company willing to give you a broker for your home loan.

Now that you know how to get your very own home loan, all you need to do is to make sure that the mortgage company you will choose will have the best offer and for you to do that, just ​compare mortgages. There will be lots and lots of company that will be after you and for you to get the best offer for the mortgage then you need to compare the companies.

After installing newest release, 3.30.0-rc1, when I drag the cursor to select file names in order to drag and transfer them to the remote site, the highlight does not work properly, sending the cursor jumping to different parts of the screen.

On my 2.8GHz Core 2 Duo iMac I get around 70% CPU usage while downloading files with filezilla from a host using explicit TLS. I am not downloading at very high speed, its a home line (3MB/s max.)

When I am just browing on the server there is no significant CPU usage.

Probably some issue regarding OpenSSL? Thanks!

With the Microsoft policies NoDrives and NoViewOnDrives it is possible to hide a certain drive ad prevent access to it when it is browsed. FileZilla doesn't follow these policies. (tested with 3.1.3.1)

NoDrives: ​http://www.microsoft.com/technet/prodtechnol/windows2000serv/reskit/regentry/93573.mspx?mfr=true

NoViewOnDrive: ​http://www.microsoft.com/technet/prodtechnol/windows2000serv/reskit/regentry/93573.mspx?mfr=true

C:\ drive is hidden for the user and when filezilla is launched you won't see the drive on the local site overview. But when you type C:\ in the local site addres bar the c:\ drive is browsable.

When the option 'Force showing hidden files' (which should be in the View menu btw) is turned off, FileZilla will overwrite hidden files on the server without asking for a confirmation, even when confirmations are set to 'Ask for Action'. If I turn on the option 'Force showing hidden files' FileZilla behaves as expected.

I feel this behaviour is undesirable. Even though the hidden file cannot be seen in the file list, doesn't mean it should be overwritten if it exists.

I am using version 3.2.4 of FileZilla Client.

I am currently having a problem whereby hidden files are not being displayed in Filezilla.

With debug switched on, I can see that the hidden files (ie ".htaccess") are being reported by the FTP server, however they are not being shown in the Remote View.

I have also checked "Server" > "Force showing hidden files", but with no effect.

FileZilla Client

Version: 3.3.4.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2010-08-16 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.11 GnuTLS: 2.8.3

Operating system:

Name: Windows Vista (build 6002, Service Pack 2) Version: 6.0 Platform: 32 bit system

Hi,

On OS X, for long the help menu has been duplicated, the content of FileZilla's help menu does not populate the "OS" help menu. Hence there are two "help" menus on the screen.

Moreover, the FileZilla's help menu (where there is the update mechanism) tends not to draw properly after having been used once in the session.

Regards,

HOW TO SOLVE THIS

​https://i.imgur.com/HcshOFf.png

I keep geting this error.

Response: 530 User topupdepot cannot log in. Error: Critical error Error: Could not connect to serve

I am trying to upload a file at filezilla....and it says to me all the time error..it's been 1 day now....plz fix it asap.

Server, Username, Password, Port, Connect button. - These parts will somehow get display glich after clicking connect and when it is connected.

Windows 7 Home Premium - Thought it was my laptop issue but after formatting glich continues to happen right after connecting.