Custom Query (4044 matches)

Hi there... We've found Filezilla to be a fantastic tool, but after your recent update, one of your more helpful features, prioritization, no longer works. It appears that once files are uploaded, Filezilla only deals with one server at a time in chronological order. Highest priority files are ignored for ones that were put in the queue first. Thus, we've had a lot of low priority files consuming time and bandwidth. Please address this. It's very challenging to use FZ without this feature working. Thanks.

Filezilla crashes when I access my laptop from FileZilla, then disconnect the laptop from my Homegroup and try to navigate away from the laptop directory.

Steps to reproduce the crash:

1. Connect a device to your homegroup
2. Access the device on FileZilla (Local site) by going to
   COMPUTERNAME
3. Disconnect the same device you access
4. Attempt to navigate away from the device

Since upgrading to v3.10.3 Filezilla has become slower and slower when connecting to my two main servers

It connects and then hangs on 'waiting for welcome message' after about 40 seconds it then displays the directory - once connected, switching between the directories is rapid, but as soon as it needs to reconnect (or upload a file) there is that long delay.

Both servers are running Centos 5 Linux - I have tried using both normal FTP (unsecured) and FTP with TLS, neither make a difference.

The problem was exacerbated in v3.10.3 (the previous v3.10 was not quite as bad), so I have had to uninstall the program and revert to an earlier version

Rich

FileZilla Client

Version: 3.10.3

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-03-29 Compiled with: x86_64-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.3.13 SQLite: 3.8.8.3

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

This may be related to this bug:

​http://trac.filezilla-project.org/ticket/3477

Two years old and long since closed, but this appears to be the same (or a similar) issue.

Uploading multiple files in multiple folders, over SFTP, with multiple concurrent uploads (5 is my setting), doesn't work with all servers.

The problem is, the client makes no intelligent decisions about the order in which uploads are processed.

That is, if you're uploading "folder_a/file_a" and "folder_a/file_b", the order in which these happen to occur, is unpredictable - it depends on whether or when a thread happens to be available.

So when "file_a" begins to upload, the folder is created - but if at the same time "file_b" begins, and assumes the folder has been created, but the previous request didn't complete yet, it will fail.

Hello,

When I ever I set my default file exists action as "Overwrite File", it works fine till the time I close & re-open the filezilla. After re-opening the application it is again set to "Use default action".

Hello

I have recently upgraded to the latest version of FileZilla Client and it seems that there is a bug when it comes to uploading images. Since I had upgraded to the latest version, all images I upload to my server has been detected as corrupt. It was fine before the upgrade.

I did a test and when I use the server web uploader, the images are being detected fine and I can use them. When uploading with Filezilla, the images turn out to be corrupt.

Here is my version details:

FileZilla Client

Version: 3.10.3-beta2

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-03-16 Compiled with: x86_64-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.3.13 SQLite: 3.8.8.3

Operating system:

Name: Windows 8.1 (build 9600), 64-bit edition Version: 6.3 Platform: 64-bit system

Please fix this bug asap.

Thanks

After i installed the 3.10 version all my passwords was base64 encoded. Now i can't connect to any server in the list. Passwords are longer than before.

I downgraded to 3.9.0.6 but i always get the login error. Stato: Contenuto cartella letto con successo Stato: Risoluzione dell'indirizzo IP ftp.restaurant39.com in corso Stato: Connessione a 84.19.170.226:21... Stato: Connessione stabilita, in attesa del messaggio di benvenuto... Risposta: 220 ProFTPD 1.3.4c Server (ProFTPD) [84.19.170.226] Comando: USER restaurant Risposta: 331 Password required for restaurant Comando: PASS Risposta: 530 Login incorrect. Errore: Errore critico: Impossibile collegarsi al server

How can i retrieve my passwords? I'm trying with base64 decoder online. But it doesn't work. If i re-set passwords manually it works. The problem is that i don't have all my old password's clients. Anyone can help me?

I am also a victim of latest released version of Filezilla FTP Client 3.10.* bug which totally crashed/changed all of my FTP account informations (nearly 100 +) stored in the SiteManager.xml file encoded with base64 secure password mode from normal insecure mode and also changed each/every encryption mode to Use Explicit FTP over if TLS available.

I have seen lot of tickets raised by so many users regarding the latest release version bug and response/reply provided by Filezilla Development team for the tickets showing their irresponsibility, inability, incapability and inexperience in handling/ providing a solution for the reported issue. Also trying to escape from the issue without providing a solid/concrete solution.

Why wouldn't the process of automated backup of SiteManager file not being included for each and every updation of filezilla FTP client. If it is included or available which keeps avoiding many complications occur after updation and also easiest for the users to revert back to working version using the backup-ed version of sitemanager without spending so much time in research process after updation and waiting to hear an permanent solution from your end which never going to happen.

i cant connect to server on win 8 i start Filezilla as admin and there are errors:

Status:	Ustalanie adresu IP dla serwer1370279.home.pl
Status:	Łączenie z 89.161.160.15:21...
Status:	Połączenie nawiązanie, oczekiwanie na wiadomość powitalną...
Status:	Inicjowanie TLS...
Błąd:	Otrzymano z serwera sygnał TLS: Handshake failed (40)
Błąd:	Nie można połączyć się z serwerem
Status:	Oczekiwanie na ponowienie...
Status:	Ustalanie adresu IP dla serwer1370279.home.pl
Status:	Łączenie z 89.161.160.15:21...
Status:	Połączenie nawiązanie, oczekiwanie na wiadomość powitalną...
Odpowiedź	220-Idea FTP Server v0.80 (serwer1370279.home.pl) [89.161.160.15]
Odpowiedź	220 Ready
Polecenie:	AUTH TLS
Odpowiedź	234 AUTH command successful.
Status:	Inicjowanie TLS...
Błąd:	Otrzymano z serwera sygnał TLS: Handshake failed (40)
Błąd:	Nie można połączyć się z serwerem

I want to change the Timeout setting to '0' but every time I save the setting with '0', next time it opens automatically with '10'. Other than '0' every thing else can be saved. Pls check this minor but annoying bug. Attaching the screenshot for your reference. Look forward to your prompt support.

When I retrieve from my server a very large file, in this case 4.42GB, filezilla reads the size wrong, ~260 MB. The download goes succesfully (I guess it doesn't stop until it reaches EOF) but I get the >100% message which is annoying since I dont know if its about to finish/ever going to.

Its not a server error becuase my android ftp client reads the size correctly.

When I open Filezilla it opens on the screen of my 17" Macbook Pro in a way that does NOT allow me to use it because the top half of the opened program is stuck ABOVE the top of my display and I can't drag or move it anywhere else on my screen to use it. PLEASE SEE SCREENSHOT. I have tried to open it while using an external monitor and without an external monitor and the problem persists either way. I sent a support ticket (or maybe it was a forum post) quite a long time ago and the problem is still there and even with the latest version. I'm amazed that no one else has reported this since then. I set up the "debug" for 3 like you said but I don't see how I can access that information to give to you. Please fix because I really need to use Filezilla asap.

Thank you very much.

-Filezilla: 3.10.3 -OSX 10.9.5

getting this eror after this new update, with every ftp request. Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listing

Hello, if I want to do an update of Filezilla client, there is no connection to internet. In our system we use an proxy server. We use the internet settings to set up the proxy settings. In some programs there is the possibility to set up an proxy or the program uses the proxy from internet settings, but filezilla doesn't do this. Can you give the chance to setup the proxy for updater in later versions?

When I am connected FTP show error

Status: Connecting to 184.164.144.133:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server Status: Waiting to retry... Status: Connecting to 184.164.144.133:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 3 of 50 allowed. Response: 220-Local time is now 02:15. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server Status: Connecting to 184.164.144.133:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server Status: Waiting to retry... Status: Connecting to 184.164.144.133:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 5 of 50 allowed. Response: 220-Local time is now 02:17. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server

If I upgrade, I can't connect to my sites. It times out trying to give a directory listing.

After upgrading to version 3.0.5.2, I connected to a server and attempted to drag and drop a small text file from the server pane to my desktop and got the following error message: "Could not determine the target of the Drag&Drop operation. Either the shell extension is not installed properly or you didn't drop the files into an Explorer window." A folder was created on my desktop with the name "fz3-12003270676720".

Since I have performed this operation in the past without a problem (not sure of my previous version, but it was a very recent one) I assume that this is a bug. No trace messages appeared in the message window during this operation.

I am running Windows XP Pro SP2.

FileZilla updated while I was away from my download session, and now I can't drag and drop files at all.

I hope this wasn't intentional - a couple of hours ago I was able to drag things freely to the desktop.

Thanks, Chris Benson

Large files (>about 200Mb) get to 100% download and then after a short time commence downloading again. The resultant downloaded file is exactly twice the size of the original file. This does not seem to happen with smaller files and happens with transfer settings at both Auto and Binary. I am using Version 3.10.3

Filezilla 3.10.3 #6672 GCC 4.8.2 Compile Error: ../../../src/engine/misc.cpp: In function ¿int GetRandomNumber(int, int)¿: ../../../src/engine/misc.cpp:276:34: error: no match for call to ¿(std::uniform_int_distribution<int>) (std::random_device)¿

return dist(std::random_device());

Patch: src/engine/misc.cpp int GetRandomNumber(int min, int max) {

wxASSERT(min <= max); if (min >= max)

return min;

/* JJS Commented out May 3, 2015

std::uniform_int_distribution<int> dist(min, max); return dist(std::random_device());

*/

/* JJS Added these two lines right from the GCC random documentation... */

std::random_device rd; std::mt19937 gen(rd());

std::uniform_int_distribution<int> dist(min, max); return dist(gen);

}

I would submit a patch, but I suspect the "real" fix is much simpler. I've been away from GCC for a while...

Using this version I have no problem uploading my files to the HP support ftp site

FileZilla Client

Version: 3.9.0.5

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2014-09-06 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.2 GnuTLS: 3.2.17 SQLite: 3.8.6

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64 bit system

Status: Adres bepalen van h1.usa.hp.com Status: Verbinden met 15.201.164.54:21... Status: Verbinding aangemaakt, welkomsbericht afwachten... Antwoord: 220------------------------------------------------------------------ Antwoord: 220- The HPRC FTP dropbox system is intended for Hewlett-Packard Antwoord: 220- company business with authorized partners and customers. The Antwoord: 220- terms and conditions for use of the system are published at Antwoord: 220- ​http://h1.usa.hp.com/ Antwoord: 220- Use of HPRC implies acceptance of these terms and conditions. Antwoord: 220- -- Thank you. Antwoord: 220------------------------------------------------------------------ Antwoord: 220 HPRC FTP Server System Opdracht: USER estio877 Antwoord: 331 Password required for estio877 Opdracht: PASS Antwoord: 230------------------------------------------------------------------ Antwoord: 230- HPRC F T P S e r v e r Antwoord: 230------------------------------------------------------------------ Antwoord: 230- Welcome to HP's ftp service. Use of this service requires Antwoord: 230- agreement with HP representatives and implies consent to the Antwoord: 230- Terms of Use (see ​http://h1.usa.hp.com/TermsOfService.html). Antwoord: 230- You are user #28 at Fri Apr 03 09:26:11 2015. Antwoord: 230------------------------------------------------------------------ Antwoord: 230- NOTE: If your FTP client implementation supports PASSIVE Antwoord: 230- mode, it is recommended that you enable it prior to Antwoord: 230- continuing. Antwoord: 230------------------------------------------------------------------ Antwoord: 230 User estio877 logged in Opdracht: SYST Antwoord: 215 UNIX Type: L8 Opdracht: FEAT Antwoord: 211-Features: Antwoord: AUTH TLS Antwoord: REST STREAM Antwoord: EPRT Antwoord: EPSV Antwoord: MDTM Antwoord: SSCN Antwoord: SIZE Antwoord: PROT Antwoord: CCC Antwoord: PBSZ Antwoord: 211 End Status: Server ondersteunt geen niet-ASCII tekens. Status: Verbonden Status: Mappenlijst ophalen... Opdracht: CWD / Antwoord: 250 CWD command successful Opdracht: PWD Antwoord: 257 "/" is the current directory Opdracht: TYPE I Antwoord: 200 Type set to I Opdracht: PASV Antwoord: 227 Entering Passive Mode (15,201,164,54,240,178). Opdracht: LIST Antwoord: 150 Opening BINARY mode data connection for file list Antwoord: 226 Transfer complete Status: Tijdzoneverschil van server berekenen... Opdracht: MDTM 2015-03-19T12_08_44Z()05d217c491830709a3fb8def343a0572.zip Antwoord: 213 20150319122635 Status: Tijdzoneverschillen: server - 0 seconden. Lokaal - 7200 seconden. Verschil: 7200 seconden. Status: Mappenlijst opmaken geslaagd Status: Adres bepalen van h1.usa.hp.com Status: Adres bepalen van h1.usa.hp.com Status: Verbinden met 15.201.164.54:21... Status: Verbinden met 15.201.164.54:21... Status: Verbinding aangemaakt, welkomsbericht afwachten... Status: Verbinding aangemaakt, welkomsbericht afwachten... Antwoord: 220------------------------------------------------------------------ Antwoord: 220- The HPRC FTP dropbox system is intended for Hewlett-Packard Antwoord: 220- company business with authorized partners and customers. The Antwoord: 220- terms and conditions for use of the system are published at Antwoord: 220- ​http://h1.usa.hp.com/ Antwoord: 220- Use of HPRC implies acceptance of these terms and conditions. Antwoord: 220- -- Thank you. Antwoord: 220------------------------------------------------------------------ Antwoord: 220 HPRC FTP Server System Opdracht: USER estio877 Antwoord: 220------------------------------------------------------------------ Antwoord: 220- The HPRC FTP dropbox system is intended for Hewlett-Packard Antwoord: 220- company business with authorized partners and customers. The Antwoord: 220- terms and conditions for use of the system are published at Antwoord: 220- ​http://h1.usa.hp.com/ Antwoord: 220- Use of HPRC implies acceptance of these terms and conditions. Antwoord: 220- -- Thank you. Antwoord: 220------------------------------------------------------------------ Antwoord: 220 HPRC FTP Server System Opdracht: USER estio877 Antwoord: 331 Password required for estio877 Opdracht: PASS Antwoord: 331 Password required for estio877 Opdracht: PASS Antwoord: 230------------------------------------------------------------------ Antwoord: 230- HPRC F T P S e r v e r Antwoord: 230------------------------------------------------------------------ Antwoord: 230- Welcome to HP's ftp service. Use of this service requires Antwoord: 230- agreement with HP representatives and implies consent to the Antwoord: 230- Terms of Use (see ​http://h1.usa.hp.com/TermsOfService.html). Antwoord: 230- You are user #28 at Fri Apr 03 09:26:39 2015. Antwoord: 230------------------------------------------------------------------ Antwoord: 230- NOTE: If your FTP client implementation supports PASSIVE Antwoord: 230- mode, it is recommended that you enable it prior to Antwoord: 230- continuing. Antwoord: 230------------------------------------------------------------------ Antwoord: 230 User estio877 logged in Status: Server ondersteunt geen niet-ASCII tekens. Status: Verbonden Status: Upload van P:\TEMP\EINLHlog\Performance_LHCLS-02_EINLHGRP-01_04_01_2015_12_00_31_CEST.csv starten Opdracht: CWD / Antwoord: 230------------------------------------------------------------------ Antwoord: 230- HPRC F T P S e r v e r Antwoord: 230------------------------------------------------------------------ Antwoord: 230- Welcome to HP's ftp service. Use of this service requires Antwoord: 230- agreement with HP representatives and implies consent to the Antwoord: 230- Terms of Use (see ​http://h1.usa.hp.com/TermsOfService.html). Antwoord: 230- You are user #29 at Fri Apr 03 09:26:39 2015. Antwoord: 230------------------------------------------------------------------ Antwoord: 230- NOTE: If your FTP client implementation supports PASSIVE Antwoord: 230- mode, it is recommended that you enable it prior to Antwoord: 230- continuing. Antwoord: 230------------------------------------------------------------------ Antwoord: 230 User estio877 logged in Status: Server ondersteunt geen niet-ASCII tekens. Status: Verbonden Status: Upload van P:\TEMP\EINLHlog\Performance_LHCLS-02_EINLHGRP-01_03_26_2015_12_04_15_CET.csv starten Antwoord: 250 CWD command successful Opdracht: TYPE I Opdracht: CWD / Antwoord: 200 Type set to I Opdracht: PASV Antwoord: 250 CWD command successful Opdracht: TYPE I Antwoord: 227 Entering Passive Mode (15,201,164,54,243,128). Opdracht: STOR Performance_LHCLS-02_EINLHGRP-01_04_01_2015_12_00_31_CEST.csv Antwoord: 200 Type set to I Opdracht: PASV Antwoord: 227 Entering Passive Mode (15,201,164,54,220,176). Opdracht: STOR Performance_LHCLS-02_EINLHGRP-01_03_26_2015_12_04_15_CET.csv Antwoord: 150 Opening BINARY mode data connection for Performance_LHCLS-02_EINLHGRP-01_04_01_2015_12_00_31_CEST.csv Antwoord: 150 Opening BINARY mode data connection for Performance_LHCLS-02_EINLHGRP-01_03_26_2015_12_04_15_CET.csv Antwoord: 226 Transfer complete Status: Bestandsoverdracht geslaagd, 112.756.464 bytes naar 81 seconden overgedragen Status: Upload van P:\TEMP\EINLHlog\2015-04-03T_6_20_44Z()05d217c491830709a3fb8def343a0572.zip starten Opdracht: PASV Antwoord: 227 Entering Passive Mode (15,201,164,54,221,111). Opdracht: STOR 2015-04-03T_6_20_44Z()05d217c491830709a3fb8def343a0572.zip Antwoord: 150 Opening BINARY mode data connection for 2015-04-03T_6_20_44Z()05d217c491830709a3fb8def343a0572.zip Antwoord: 226 Transfer complete Status: Bestandsoverdracht geslaagd, 32.295.279 bytes naar 23 seconden overgedragen Antwoord: 226 Transfer complete Status: Bestandsoverdracht geslaagd, 103.263.288 bytes naar 118 seconden overgedragen Status: Mappenlijst ophalen... Opdracht: PASV Antwoord: 227 Entering Passive Mode (15,201,164,54,206,149). Opdracht: LIST Antwoord: 150 Opening BINARY mode data connection for file list Antwoord: 226 Transfer complete Status: Mappenlijst opmaken geslaagd Status: Verbinding met server verbroken Status: Verbinding met server verbroken

======================

Using this version I cannot get the folder info on the ftp server. After a connection is made I get an "error" about the certificate used. I accept that message using the Ok button. After that the connection continues but then stops at the LIST command. This does not seem to be related to the certificate error but I am not sure. However, Filezilla 3.9.x has no problem using the site. In case it is relevant, the (Dutch) warning is: Het certificaat van de server is onbekend. Controleer het certificaat zorgvuldig om vast te stellen of de server vertrouwd kan worden.

It says the certificat is unknow. Should that be the certificate or the certificate chain as it seems to be a normal Verisign certificate. It is a RSA-SHA-1 2048bit certificate in case that is relevant.

FileZilla Client

Version: 3.10.3

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-03-29 Compiled with: x86_64-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.3.13 SQLite: 3.8.8.3

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

Status: Adres bepalen van h1.usa.hp.com Status: Verbinden met 15.201.164.54:21... Status: Verbinding aangemaakt, welkomsbericht afwachten... Status: TLS initialiseren... Status: Certificaat controleren.... Status: TLS-verbinding opgezet. Status: Server ondersteunt geen niet-ASCII tekens. Status: Verbonden Status: Mappenlijst van "/" ophalen... Opdracht: CWD / Antwoord: 250 CWD command successful Opdracht: PWD Antwoord: 257 "/" is the current directory Opdracht: TYPE I Antwoord: 200 Type set to I Opdracht: PASV Antwoord: 227 Entering Passive Mode (15,201,164,54,212,117). Opdracht: LIST Fout: Connection timed out after 20 seconds of inactivity Fout: Ontvangen van mappenlijst is mislukt

I have switched to using ftpes with a server I connect to very often. I connect, can upload etc but all of a sudden, I see this in the logging: 09:32:01 Opdracht: PORT 192,168,188,31,252,91 09:32:01 Antwoord: 500 Illegal PORT command 09:32:01 Opdracht: PASV 09:32:01 Antwoord: 227 Entering Passive Mode (212,26,193,125,235,92). 09:32:01 Opdracht: MLSD 09:32:01 Antwoord: 150 Opening ASCII mode data connection for MLSD 09:32:01 Antwoord: 425 Unable to build data connection: Operation not permitted 09:32:01 Fout: Ontvangen van mappenlijst is mislukt

The ftp server has an IP in the 212 range so it is not local, the PORT command is something local but gets an 'Illegal PORT command' as response. Connection is then lost and I need to disconnect and reconnect to proceed.

Status: Resolving address of ftp.augustabenelux.nl Status: Connecting to 46.44.148.131:21... Status: Connection established, waiting for welcome message... Response: 220 Titan FTP Server 10.01.1740 Ready. Command: AUTH TLS Error: Could not connect to server

Status: Waiting to retry... Status: Resolving address of ftp.augustabenelux.nl Status: Connecting to 46.44.148.131:21... Status: Connection established, waiting for welcome message... Response: 220 Titan FTP Server 10.01.1740 Ready. Command: AUTH TLS Error: Could not connect to server

==> "AUTH TLS" command is killing the login process on some FTP server when using "Quick Connect" on FileZilla. TLS should not be enforced on simple ​ftp:// login, or you should add a checkbox to activate/deactivate TLS, just next to the "Quickconnect" button. I don't know if this is a bug report or a feature request~ it is certainly a problem for inexperienced users.

==> Login works fine when: a) Using the FileZilla Site Manager and picking the "Only use plain FTP (insecure)" option b) Adding a network location within Windows c) Using Internet Explorer

under connection, the timeout in seconds will revert to 10 secs and not accept the zero to disable the timeout.

When downloading a file from filezilla client, the first char is cut off. This is a random event. Doesn't always happen.

Has work around: -Try to download continuously until file is complete.

Personal case: -Downloading XML files, where the first sequence of chars are <?xml and < gets cut off making the xml invalid. -Files are not larger than 2kb. -Win 8.1 Pro, Intel i3 4005U

I was uploading to an FTP and wanted to change the simultaneous upload settings. Once I changed from 2 to 8 and pressed the "OK" button, FileZilla crashed. When I reopened, the setting had not been saved. I changed the setting when no transfer was happening and it saved successfully.

Since FileZilla 3.10.3-beta2 the status bar of the local file list always shows "Not connected". This does not change after connecting to a server.

Version: 3.10.3-rc1

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-03-21 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -msse -mfpmath=sse -O2 -g -Wall -g -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.3.13 SQLite: 3.8.8.3

Operating system:

Name: Windows 7 (build 7601, Service Pack 1) Version: 6.1 Platform: 32-bit system

When importing a Site Manager entry, the Base64-encoded password entry is treated as a plain-text password.

Steps to reproduce (3.10.1.1 and 3.10.2-rc2): 1) File -> Export -> Export Site Manager entries 2) XML file contains a Base64-encoded password string, which correctly decodes to the plain-text password 3) Import the Site Manager entry 4) Password to the FTP site is not accepted anymore by the remote server 5) Repeat Site Manager Export 6) XML file contains a different, longer Base64-encoded password string, which decodes to a Base64-encoded password string from step 2, not the correct plain-text password

Hi,

Error Response: 550 The supplied message is incomplete. The signature was not verified. Error: File transfer failed Status: Retrieving directory listing of "/httpdocs"... Status: Directory listing of "/httpdocs" successful.

Settings on filezilla Protocol: FTP Encryption: Require explicit FTP over TLS Logon Type: Normal

Filezilla version: 3.10.0

Able to upload file on linux server but not on windows server.

Kindly help.

Regards,

Since we upgraded to 3.10.2 DBF files arrive damaged. After a few records the content and fields seems shifted somehow. Additional problem is that we can't go back to an earlier version of Filezilla easily as the passwords are now crypted (good thing...) but in the previous version they weren't. See the damage in the picture, from record 81. The original DBF is attached too; you should be able to read it in Excel for example.

Dick

The installer creates a Utilties folder in the start menu. Utilties is spelled incorrectly - it should be Utilities.

Hello

I have recently upgraded to the latest version of FileZilla Client and it seems that there is a bug when it comes to uploading images. Since I had upgraded to the latest version, all images I upload to my server has been detected as corrupt. It was fine before the upgrade.

I did a test and when I use the server web uploader, the images are being detected fine and I can use them. When uploading with Filezilla, the images turn out to be corrupt.

Here is my version details:

FileZilla Client

Version: 3.10.3-beta2

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-03-16 Compiled with: x86_64-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.3.13 SQLite: 3.8.8.3

Operating system:

Name: Windows 8.1 (build 9600), 64-bit edition Version: 6.3 Platform: 64-bit system

Please fix this bug asap.

Thanks

Dear Sirs,

Filezilla seems to install the update in normal operating mode but every time i close the app and then open it again it want's to upgrade to version current. this installation is accepted for the duration of the usage but when the program is closed and opened again the update is no longer active.

Although, when you run it in Admin mode it works well.

PS; you guys are really kidding when you have the reams and reams of information how to submit a fault report? Do you really think people are going to read all that to fix a fault? It's easier to get a different product.... Please consider.

Copy of Updte confirm; FileZilla Client

Version: 3.9.0.3

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2014-08-13 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.2 GnuTLS: 3.2.16 SQLite: 3.8.4.3

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64 bit system

System: Mac OS 10.9.5 FileZilla Client 3.10.1.1 I am running a laptop connected to a larger monitor. Monitor and laptop windows align at top. Dock is on larger monitor but applications open on laptop.

Steps to reproduce: Open FileZilla client from dock or direct from applications folder. FileZilla opens on laptop screen. Toolbar is not visible, though it is checked on view menu. Top of main window is not visible, so initial file listing is only partly visible. There is no way to drag the window down.

On my Mac OS X (10.9.5) MacBook Pro (13-inch, Mid 2012), when I unplug my external monitor the FileZilla window adapts to the new smaller built-in display by moving the entire window upward, leaving the title bar and upper panel offscreen. It remembers this new window position to that the title bar and upper panel remain offscreen even when I plug the large monitor back in, and worse, even when I quit and restart FileZilla. I cannot reach the window Zoom button, since the title bar is offscreen, and there is no Window menu from which to choose a Zoom command. On the built-in monitor, I haven't found any way out; the only solution I have found is to reattach the large monitor, go to Mission Control, and drag the FileZilla window to the smaller built-in monitor. After leaving Mission Control, FileZilla still spreads over the top edge of the built-in monitor, but the title bar is now visible on the large monitor and I can once again drag the app window and use the Zoom button. (My monitor arrangement is the 2560x1600 monitor above, with the menu bar, and the 1200x800 built-in display below left-aligned.) I can provide screen shots if needed.

Status: Insecure server, it does not support FTP over TLS. Command: USER mirprepmain Response: 331 Password required for mirprepmain. Command: PASS Response: 530 User mirprepmain cannot log in. Error: Critical error: Could not connect to server

Status: Insecure server, it does not support FTP over TLS. Command: USER mirprepmain Response: 331 Password required for mirprepmain. Command: PASS Response: 530 User mirprepmain cannot log in. Error: Critical error: Could not connect to server

Alwasy when I am uploading something to my server it does not show in the right side box (remote site:). It only appears when I click "REFRESH" seems it is not automatic have to do it manually.

Even in the left side box (local site:) it is not refreshing automatically. i have to do it manually to show the update on the left side box.

Status: Resolving address of server.kdimachine.com Status: Connecting to 50.76.186.9:21... Status: Connection established, waiting for welcome message... Status: Insecure server, it does not support FTP over TLS. Command: USER blixberg Response: 331 Please specify the password. Command: PASS Response: 530 Login incorrect. Error: Critical error: Could not connect to server

Status: Resolving address of server.kdimachine.com Status: Connecting to 50.76.186.9:21... Status: Connection established, waiting for welcome message... Status: Insecure server, it does not support FTP over TLS. Command: USER blixberg Response: 331 Please specify the password. Command: PASS Response: 530 Login incorrect. Error: Critical error: Could not connect to server

Status: Resolving address of server.kdimachine.com Status: Connecting to 50.76.186.9:21... Status: Connection established, waiting for welcome message... Status: Insecure server, it does not support FTP over TLS. Command: USER blixberg Response: 331 Please specify the password. Command: PASS Response: 530 Login incorrect. Error: Critical error: Could not connect to server

Hello,

I get a GnuTLS - 15 error on Windows 8.

Same trying on another PC under Windows 7 on the same network works.

FileZilla Client

Version: 3.10.2

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-03-02 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -msse -mfpmath=sse -O2 -g -Wall -g -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.3.13 SQLite: 3.8.8.3

Operating system:

Name: Windows 8.1 (build 9600), 64-bit edition Version: 6.3 Platform: 64-bit system

Log: 2015-03-13 08:38:19 3492 1 Status: Resolving address of ftp.car-pass.be 2015-03-13 08:38:19 3492 1 Status: Connecting to 85.112.27.122:990... 2015-03-13 08:38:19 3492 1 Status: Connection established, initializing TLS... 2015-03-13 08:38:19 3492 1 Error: GnuTLS error -15: An unexpected TLS packet was received. 2015-03-13 08:38:19 3492 1 Error: Could not connect to server 2015-03-13 08:38:19 3492 1 Status: Waiting to retry... 2015-03-13 08:38:24 3492 1 Status: Resolving address of ftp.car-pass.be 2015-03-13 08:38:24 3492 1 Status: Connecting to 85.112.27.122:990... 2015-03-13 08:38:24 3492 1 Status: Connection established, initializing TLS... 2015-03-13 08:38:24 3492 1 Error: GnuTLS error -15: An unexpected TLS packet was received. 2015-03-13 08:38:24 3492 1 Error: Could not connect to server

Any idea?

Kind regards

I love FileZilla and have used this program for years. I've never had an issue until this latest batch of updates. The last version that works for me is 3.9.0.6. Anything after that installs and opens fine. However, when trying to connect to my saved website (as I always have in the past - changing nothing), I get the message that it is "Retrieving directory listing...". It sits there for almost 30 seconds, then quickly spools through a few commands and ends with the red "Error: Connection timed out" and "Error: Failed to retrieve directory listing". Nothing in the settings for the connection has been changed, yet every version after the one listed gives me this problem. I have resorted to downgrading to the last working build to be able to access my websites. What is happening and how can I fix it?

1) 2 days ago I tried to install FZ on the computer of a friend. This was a new installation.

Environment: Windows 8 + internet Explorer (IE) + Kapersky as antivirus I analyzed the exe installation file once downloaded with Kapersky, no issue reported. When I executed the file, it was hanging with an empty or black pop-up windows openening. I had to stop the computer and restart it

I think the file was around 700 ko ( the same size than the one mentioned by IE while confirming the download).

2) Today on my computer, where FZ is installed since a long time, and is runing as expected, I received an update and I see that FileZilla_3.10.2_win32-setup.exe is around 6064 Ko I got no issue while installing an using this new update.

Then I tried to download FileZilla from FZ site on my computer: Windows 7 + Chrome + Norton

Norton stopped the downloading sending messages as : "c90f.tmp (suspicious.Cloud9) deleted"

At the end no file is downloaded

the file c90f.tmp is loaded from ​http://cdn.qualitycontenthouse.com

Is the downloaded file corrupted? or is it a malware? I have no more access to the Windows 8 environment and hope to have not installed a malware on this computer which is not mine.

In both cases I started the download from: ​https://forum.filezilla-project.org/ and was redirected to sourceforge

Thanks for your time

Hi There,

I have been experiencing an error lately when I attempt to drop files into folders that are intended to replace outdated files. Perhaps some context will help...

We operate an online storefront for Neighborhood Health Plan. They have thousands of products which are identified by product codes. For example, one item might be labeled "11020". Each product has a thumbnail and full sized image which we drop into a directory in Filezilla, which we pull from when "creating the product". Thumbnail images have a _2 suffix, with _1 for the full sized image.

Now, lets say they print a new version of 11020 with new graphics, new colors, etc.. In this case we would need to create and drop in new thumbnails. So I would Scale and crop the image, save as 11020_1 and 11020_2, and drop it into the appropriate directory. When I do this, I see a prompt asking me If I want to replace the existing files with these new ones. I click yes to replace, but the file never gets swapped out. I find that the only option I have is to change the suffix to _T and _F for the new file to be available.

There are several other ramifications for this replace file bug, but I figured this was the easiest way to describe it.

GnuTLS error -12: A TLS fatal alert has been received.

in new version 3.5.3 win client, old version 3.5.2 works just fine. Server UNIX.

As connection proceeds, it comes up with a "certificate expired" for the server. Whether or not this is 'OK'd' it then moves on, makes a complaint about non ascii characters and finally holds and times out at 'failed to read directory listing: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. (what non-ascii characters??) Status: Connected Status: Retrieving directory listing..

(there may be some extra lines here but they don't wait around long enough to be copied)

Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (173,254,28,147,20,170) Command: MLSD Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listing

Have installed v 3.9.0.5 on another PC and it works fine. Seems to be a problen with 3.10.2

When attempting to upload using FileZilla the server access does not list the directories. Unable to list directories is the error. At first I thought it was my problem then discovered after the update from my older version (3.9.0.5) is when the problem began. I rolled back to the 3.9.0.5 version and the app began to work correctly. I now ignore the prompt to update each time it loads. I have other clients that use FileZilla and I recommend to them not to update until further notice about this problem being solved.

Just upgrade to new version; now i cannot log into server (previous version 2+ years old 3.6.02 and worked fine).

"Command: MSLD Connection timed out afer 20 second of inactivity Failed to retrieve directory listing"

config: FileZilla Client

Version: 3.10.2

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-03-02 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -msse -mfpmath=sse -O2 -g -Wall -g -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.3.13 SQLite: 3.8.8.3

Operating system:

Name: Windows 7 (build 7601, Service Pack 1) Version: 6.1 Platform: 32-bit system

========================= Trying to open a new connection, app says it already has a connection. But directory list does not succeed. Old version 3.6 works fine.

After updating to the new version 3.10.2 on March 5, 2015 I am no longer able to view the directory listing thus unable to perform either uploads or downloads. This does not happen with my connection to GoDaddy.

I recently installed the FTP Client. After this I had an application called "super optimizer" installed and running without my authorization or having installed this application knowingly myself. I can only surmise that it came with the Filezilla installation. It blocked access to my desktop by displaying a dark grey window which could not be closed.
Removing the Super Optimizer was difficult because it infiltrated a lot in the Registry. I like to install the FTP Server as well but hesitate to do so with the above experience.
Are you aware of this Super Optimizer possibly being installed with FileZilla free downloads?

When trying to FTP to Plesk 12.0 using Avtive or Passive mode we get the same issues.

Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Connected Status: Retrieving directory listing... Status: Server sent passive reply with unroutable address. Using server address instead. Command: LIST Response: 534 Protection level negotiation failed. Error: Failed to retrieve directory listing

The OS of the server is Server 2012.

When trying an alternative FTP client FTP Voyager we are able too FTP

With option --disable-manualupdatecheck there is error wxTimerEvent not declared in Mainfrm.h I saw that the file call updater.h on the value of the variable FZ_MANUALUPDATECHECK

 #if FZ_MANUALUPDATECHECK
 #include "updater.h"
 #endif

This file by making a check on the same variable includes the file wx/timer.h

Then I added an else to control the variable

 #if FZ_MANUALUPDATECHECK
 #include "updater.h"
 #else
 #include "wx/timer.h"
 #endif

and build is ok.

I do not know if it is the best choice.

I'm sorry for my bad english.

I applied this patch, and it's ok --- filezilla-3.10.2-orig/src/interface/Mainfrm.h 2014-12-28 18:48:10.000000000 +0100 +++ filezilla-3.10.2/src/interface/Mainfrm.h 2015-03-03 16:14:02.441945287 +0100 @@ -28,6 +28,8 @@ class CWindowStateManager;

#if FZ_MANUALUPDATECHECK #include "updater.h"

+#else +#include "wx/timer.h"

#endif class CWindowStateManager;

I get a virus alert from Norton when I try to download either the client or the server file.

Using View / Edit - lowercase and uppercase files of same name results in error

Testcase 1 (works): Remote -> /foo/bar.html Opens as -> fz3temp-1\bar.html Remote -> /foo2/bar.html Opens as -> fz3temp-1\bar 2.html

Testcase 2 (fails): Remote -> /foo/bar.html Opens as -> fz3temp-1\bar.html Remote -> /foo2/Bar.html Opens as -> fz3temp-1\bar.html Result -> when saving bar.html, it tries to upload it to both /foo/bar.html and /foo2/Bar.html

Hi i looked through the tracker and it seems this was reported more than once but still not properly working.

The directory listing works with Internet Explorer but filezilla doesn't show all files.

I've attached the log. Sorry but i had to obfuscate my ftp host and the IP in the passive transfer.

Hi i looked through the tracker and it seams this was reported more than once but still not properly working.

The directory listing works with Internet Explorer but filezilla doesn't show all files.

I've attached the log. Sorry but i had to obfuscate my ftp host and the IP in the passive transfer.

I connect to my hosting service just fine this morning. After updating to the latest version, I can not login to anywhere. I used another computer with an older version of FileZilla and logged in just fine.

Status: Resolving address of serendipity-photography.com Status: Connecting to 184.172.54.126:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (184,172,54,126,221,253) Command: MLSD Error: The data connection could not be established: ETIMEDOUT - Connection attempt timed out

If I type /tmp/ in Local site, it works fine. if I then type ~ in Local site, it says: '/tmp/~' does not exist or cannot be accessed.

It seems to look for ~ as a subdirectory of the current directory.

This is on Filezilla 3.7.3

Hello. I got an update recently which messed up my secure FTP functionality. As such, I installed the previous version of Filezilla client (btw, with one slip of the finger I was "rewarded" with extra software that was extremely annoying and was quite difficult to fully uninstall, nearly malware. I guess that's how Sourceforge rolls now, probably not your fault.)

Anyway...because of the above, I tried the feature where in Settings... Updates you can choose "Never". This apparently doesn't work. Now I'm nagged every single time I use the program. And yes, I already know that there was some fix that deals with secure connections, so I might try my luck and see if the program works again for secure stuff.

So I'd call it non-urgent priority, even though it's super annoying. :)

Thanks for your help.

Ever since that last 2 updates I've been unable to connect to any remove hosts. I keep getting similar failures. For some reason it times out retrieve the directories. I've tried 2 other FTP clients and they resolve with no issue.

Status: Resolving address of ftp.spierce-1.bluehoststaff.com Status: Connecting to 50.87.230.172:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (50,87,230,172,218,171) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

Hi, for about 3 months or more I have problem when I try drag&drop folder/file to my Explorer, so I have to download it to current local directory set in FileZilla :/ I am updating with releases continously, so FileZilla is reinstalled very often. I hope you could help me. Let me know if any logs/raports are needed. Greetings

I connect to a server, then establish a connection to a different server in a new tab.

(See screenshot 1.)

Instead of creating a new tab alongside the old one, it creates a new screen that overlays the old one, but is slightly smaller.

There is no way to switch between the two tabs.

(See screenshot 2.)

This has been a problem since FileZilla version 3.9.0.6. I am now using FileZilla version 3.10.1.1, and the problem remains.

Original forum discussion: ​https://forum.filezilla-project.org/viewtopic.php?f=2&t=34409

I have just installed Filezilla 3.10.1.1

When I try to connect to a server I get a Certificate notification

and then I am unable to remain connected to the server.

Server messages: Status: Connecting to 154.42.65.15:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing of "/"... Command: CWD / Response: 250 OK. Current directory is / Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (154,42,65,15,71,37) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

This happens every time.

after installing update to v 3.10.1.1 i receive certificate notification on some of the servers I connect to. Once I hit ok to ignore the cert error, I am unable to connect to that server

after installing update to v 3.10.1.1 i receive certificate notification on some of the servers I connect to. Once I hit ok to ignore the cert error, I am unable to connect to that server

after update v3.10.1.1 i cannot connect my servers problem is

Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: Connection timed out Error: Could not connect to server

after update v3.10.1.1 i cannot connect my servers problem is

Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: Connection timed out Error: Could not connect to server

after update v3.10.1.1 i cannot connect my servers problem is

Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: Connection timed out Error: Could not connect to server

I have Filezilla 3.10.1.1 When I try to connect to some server appear this message:

Status: Resolving address of server02.4more.it Status: Connecting to 46.16.88.36:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (46,16,88,36,105,69) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

This error appear for EVERY server... But when i try to connect with Filezilla 3.9.0.6 nothing error appear and i can work in FTP.... WHY?!

After upgrading to 3.10.1.1 experienced a problem with editing file with the same name. As far as I can see it's a know issue which should be fixed with this relase, but it is not.

"2015-02-01 - FileZilla Client 3.10.1.1 released Bugfixes and minor changes: Fix editing of files with the same name in different directories"

Downgrading to 3.10.0.2 fixed the issue.

Steps to reproduce:

• View/Edit folder1/file1.php
• View/Edit filder2/file1.php
• File has changed dialog appears even if it is not changed

Using editor Notepad++ (not upgraded recently)

I have been seeing this for a number of FileZilla Client versions... kind of annoying.

The latest update is having issues connecting to my web host server...I am not the only one having this issue!!! Please can you fix this as soon as possible while I continue using the previous version.

Currently you can only hide the local tree view. I don't use the local section. I only use the remote section and drag & drop.

Is there a way to hide the entire local section? It's extra space that I could use.

Sadly it only collapses so far and that's it.

I would like to hide the entire local section. If my attachment works it will be marked red.

Have been using FileZilla. FTP had been working fine. Perhaps last update of FileZilla changed something – They updated yesterday. It does connect, and I do get the file listing at the Remote site. However:

During a file update (upload) I get a message: Response: 150 Opening ASCII mode data connection. Response: 550 The supplied message is incomplete. The signature was not verified. Error: File transfer failed

• If the file to be updated is already at the Remote Site, I will have seen something happening at the Remote Site view of FileZila, then the target file disappears.

• Now if the target file of that name is not there, if I try again, it does upload the desired file … keep in mind, however, that I still get that error message.

This is true with other hosts I am using also.

My webhost website has an alternative, Cyberduck, and the update worked with that, but... I strongly prefer FileZilla interface.

Message -> "The server's certificate is unknown" with version "FileZilla_3.10.0-rc2_win32-setup.exe". It works okay using version "FileZilla_3.9.0.6_win32-setup.exe"

Every time I want to copy a file/dir name with "right clic->copy" it "freezes" filezilla just after I do right clic. After that, I can only kill the process using OS task killer.

It only tested it under Ubuntu (any version) and I can confirm that it doesn't happens under Windows. I'm using FileZilla 3.7.3 but the bug has been there for a long time.

First I connect to the server with the client and it is fast and no problems. I open the folders on server and on my pc so I can make a transfer. I doubleclick to transfer a file, and it reacts allright, but then it reports an error and for a slight second I can see the file in the list on the serverfolder and then it disappears. So instead of updating the file on the server the file is now missing!!!! I tried several times. This occured just after upgrading the client on automatic suggestion. Which I have done before without problems. Now this is extra annoying as it is the last thing I wanted to do before going on a travel tomorrow morning. And now instead of having an updated website I have a website with 2 missing files. Here is a copy of the report:

Status: Resolving address of s219191705.onlinehome.fr Status: Connecting to 82.165.174.120:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Connected Status: Retrieving directory listing... Status: Calculating timezone offset of server... Status: Timezone offsets: Server: 3600 seconds. Local: 3600 seconds. Difference: 0 seconds. Status: Directory listing of "/u46581113" successful Status: Resolving address of s219191705.onlinehome.fr Status: Connecting to 82.165.174.120:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Connected Status: Starting upload of E:\Hallon\Hemsidor\Brocante Albinque\sieges.htm Command: CWD /u46581113 Response: 250 CWD command successful. Command: PWD Response: 257 "/u46581113" is current directory. Command: TYPE A Response: 200 Type set to A. Command: PASV Response: 227 Entering Passive Mode (82,165,174,120,202,118). Command: STOR sieges.htm Response: 150 Opening ASCII mode data connection. Response: 550 The supplied message is incomplete. The signature was not verified. Error: File transfer failed Status: Starting upload of E:\Hallon\Hemsidor\Brocante Albinque\sieges.htm Status: Retrieving directory listing of "/u46581113"... Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (82,165,174,120,202,122). Command: LIST Response: 150 Opening BINARY mode data connection. Response: 226 Transfer complete. Command: TYPE A Response: 200 Type set to A. Command: PASV Response: 227 Entering Passive Mode (82,165,174,120,202,123). Command: STOR sieges.htm Response: 150 Opening ASCII mode data connection. Response: 550 The supplied message is incomplete. The signature was not verified. Error: File transfer failed Status: Starting upload of E:\Hallon\Hemsidor\Brocante Albinque\sieges.htm Status: Retrieving directory listing of "/u46581113"... Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (82,165,174,120,202,133). Command: LIST Response: 150 Opening BINARY mode data connection. Response: 226 Transfer complete. Command: TYPE A Response: 200 Type set to A. Command: PASV Response: 227 Entering Passive Mode (82,165,174,120,202,135). Command: STOR sieges.htm Response: 150 Opening ASCII mode data connection. Response: 550 The supplied message is incomplete. The signature was not verified. Error: File transfer failed Status: Retrieving directory listing of "/u46581113"... Status: Directory listing of "/u46581113" successful

I just upgraded to the current version today and now I can't communicate with the FTP service. Here is the command line summary:

Status: Resolving address of rjwagner49.com Status: Connecting to 74.220.207.135:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (74,220,207,135,73,188) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

I made no changes to the log-in information, but now it won't get the directory listing.

That's really it. At first, I just thought maybe something was wrong on the website. So to see, I just uninstalled the latest version (FileZilla_3.10.0.2_win32-setup.exe or whatever was the latest as of a day or two ago), and then reinstalled a previous version (which does not have the problem), which is:

FileZilla Client

Version: 3.8.0

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2014-03-28 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 3.2.12 SQLite: 3.7.16.2

Operating system:

Name: Windows NT 6.1 (build 7601, Service Pack 1) Version: 6.1 Platform: 64 bit system

Thanks! Roger

I just downloaded the latest version 3.10.0.2 and it wouldn't work. My ISP worked on the problem for a long while today and finally called to say that the new version doesn't authenticate with a PLESK Web host.

This is the error message:

Status: Resolving address of xxxxxxx.com Status: Connecting to 216.235.225.28:21... Status: Connection established, waiting for welcome message... Response: 220 ProFTPD 1.3.4c Server (ProFTPD) [216.235.225.28] Command: AUTH TLS Response: 234 AUTH TLS successful Status: Initializing TLS... Error: GnuTLS error -12: A TLS fatal alert has been received. Error: Could not connect to server

Since version 3.10.0, connections through SFTP always ignore any proxy settings I might have configured. 3.9.6 and older do not.

I've got it configured to use a HTTP proxy, over port 443. The "Bypass Proxy" setting for the connection I use is not checked.

The console shows the following lines (after enabling detailed output):

Response:	fzSftp started
Command:	proxy 1 "proxy.domain.com" 443
Command:	open "user@site.com" 2222

But then it actually does a direct connection instead. I confirmed this by looking at my firewall's network connections view, netstat, and by the fact that I'm no longer speed-limited by the proxy.

I've downgraded until the issue disappeared, and found that the proxy 3.9.6 and older versions do not have this issue.

I assume it's caused by the "Updated SFTP components from PuTTY" change introduced in 3.10.0-beta3, but I might be wrong.

Dear Sirs, During the last update I got a blue screen. Two more attempts to update resulted in further crashes. Dowloaded the update file from your site but same problems. Uninstalled Filezilla. Ran registry cleaner. Tried installing Filezilla - blue screen (twice). Seems the initial crash resulted in some damaged registry files which will need to be removed manually. Are you able to help? OS Windows7 x64 Many thanks, Sylvio www.lifestylephotography.co.uk

I get this error message after closing Filezilla

Directory ... couldn't be deleted (error 66: Directory not empty) see attached screen shot

Doesn't make sense to me

Every time I close FileZilla, I get "File 'C:\Users\Rich\AppData\Roaming\FileZilla\filezilla.xml~' couldn't be removed (error 0: the operation completed successfully.)"

It's mostly a nuisance, but it's unclear to me why this transpires, and error success seems like incorrect behavior.

Autoupdate works fine except that it places the finished app in the Documents folder. From memory it indicates it will be in the Downloads folder, but really it would be preferable if it went directly into the Applications folder, but would then have to handle replacing the current version or keeping both

After this update in cannot connect to my sever. it gives me some unknown certificate error and cannot connect to server. I downgraded to the previous version and its working fine.

Since updating FileZilla Client from v3.10.0.2 to v3.10.1.1, when FileZilla prompts for my 'Unknown certificate' it no longer shows the checkbox for 'Always trust certificate for future sessions'.

Certificate is within the Validity period and host address matches the SAN. This is self-signed, with many SAN entries to cover all accessible hostnames the FTP is accessed from internally and externally.

I can only assume because of the number of SAN in the list, it pushes the checkbox off screen, and doesn't have anything to do with any problem or expiration of the certificate.

Only other issues I found similar to this were expired certificates where the checkbox was visible, but not selectable.

For me, it's not even visible.

Previous updates have gone smoothly Now Status: Connecting to 65.175.112.233:21... Status: Connection attempt failed with "EACCES - Permission denied". Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of ftp.acbtexas.org Status: Connecting to 65.175.112.233:21... Status: Connection attempt failed with "EACCES - Permission denied".

FileZilla Client

Version: 3.10.1.1

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-02-01 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.21 SQLite: 3.8.8.2

Operating system:

Name: Windows Vista (build 6002, Service Pack 2) Version: 6.0 Platform: 32-bit system

Upgraded and now get the error "Failed to retrieve directory listing" from MediaTemple servers. Most others I get the same error but I have one that will work.

Something has changed with the update I did today. Another machine that I did NOT upgrade FZ on is working fine.

Status: Resolving address of www.killeringenuity.com Status: Connecting to 70.32.68.105:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (70,32,68,105,234,27) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

FileZilla Client

Version: 3.10.0.2

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-01-16 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.20 SQLite: 3.8.7.2

Operating system:

Name: Windows 7 (build 7601, Service Pack 1), 64-bit edition Version: 6.1 Platform: 64-bit system

Hello, please bear with me, I am very much a newbie. I barely know how to upload files, but have been doing that through you for a while and all was going fine until recently when I updated my version of FileZilla. I keep getting error messages, such as "Failed to retrieve directory listing", and can't connect to my website(s)on my main computer. I called GoDaddy for help, and they thought it might be my browser or firewall, but nothing changed and I don't think that's it. Then I tried to upload via my laptop, which had an older version of FileZilla, and it worked fine. I asked my friend who told me about FileZilla a few years ago, and he suggested I report the issue, because maybe no one else has noticed it. I can't imagine that I'd be the only one, but don't know what else to do. Here is the message I've been getting: " Status: Connecting to 160.153.59.0:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (160,153,59,0,198,14) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing"

Can you help? Bear in mind it's hard for me to comprehend much of this at all. I hope I am using the proper protocol to ask for help. Thank you very much for your time and consideration. Steve

Problems uploading since new version of FZ updated Insecure server messages never had before, files don't load or fail. I had an older version of FZ on another PC and it is fine. Also more stable when dragging and dropping files, new version skips down remote directory files

After updating this morning, the new version failed to login on my Server. Restoring the system - and everything worked perfectly - with the old version 3.9.0.2

After upgrading to version 3.10.0.0 then 3.10.0.1 and now 3.10.1.1 program times out after failing to retrieve directory listing. Have needed to downgrade to version 3.9.0.6 to establish connection and use program. FileZilla Client

Version: 3.10.1.1

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-unknown-linux-gnu Build date: 2015-02-01 Compiled with: i686-w64-mingw32-gcc (GCC) 4.9.1 Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 3.0.3 GnuTLS: 3.2.21 SQLite: 3.8.8.2

Operating system:

Name: Windows 8.1 (build 9600), 64-bit edition Version: 6.3 Platform: 64-bit system

2015-02-16 20:35:12 5156 1 Status: Resolving address of ftp.allstyle-bathrooms.com.au 2015-02-16 20:35:12 5156 1 Status: Connecting to 116.0.23.214:21... 2015-02-16 20:35:12 5156 1 Status: Connection established, waiting for welcome message... 2015-02-16 20:35:12 5156 1 Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- 2015-02-16 20:35:12 5156 1 Response: 220-You are user number 5 of 50 allowed. 2015-02-16 20:35:12 5156 1 Response: 220-Local time is now 20:34. Server port: 21. 2015-02-16 20:35:12 5156 1 Response: 220-IPv6 connections are also welcome on this server. 2015-02-16 20:35:12 5156 1 Response: 220 You will be disconnected after 15 minutes of inactivity. 2015-02-16 20:35:12 5156 1 Command: AUTH TLS 2015-02-16 20:35:12 5156 1 Response: 234 AUTH TLS OK. 2015-02-16 20:35:12 5156 1 Status: Initializing TLS... 2015-02-16 20:35:12 5156 1 Status: Verifying certificate... 2015-02-16 20:35:12 5156 1 Status: TLS connection established. 2015-02-16 20:35:12 5156 1 Command: USER all49915 2015-02-16 20:35:12 5156 1 Response: 331 User all49915 OK. Password required 2015-02-16 20:35:12 5156 1 Command: PASS * 2015-02-16 20:35:13 5156 1 Response: 230 OK. Current restricted directory is / 2015-02-16 20:35:13 5156 1 Command: SYST 2015-02-16 20:35:13 5156 1 Response: 215 UNIX Type: L8 2015-02-16 20:35:13 5156 1 Command: FEAT 2015-02-16 20:35:13 5156 1 Response: 211-Extensions supported: 2015-02-16 20:35:13 5156 1 Response: EPRT 2015-02-16 20:35:13 5156 1 Response: IDLE 2015-02-16 20:35:13 5156 1 Response: MDTM 2015-02-16 20:35:13 5156 1 Response: SIZE 2015-02-16 20:35:13 5156 1 Response: MFMT 2015-02-16 20:35:13 5156 1 Response: REST STREAM 2015-02-16 20:35:13 5156 1 Response: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; 2015-02-16 20:35:13 5156 1 Response: MLSD 2015-02-16 20:35:13 5156 1 Response: AUTH TLS 2015-02-16 20:35:13 5156 1 Response: PBSZ 2015-02-16 20:35:13 5156 1 Response: PROT 2015-02-16 20:35:13 5156 1 Response: TVFS 2015-02-16 20:35:13 5156 1 Response: ESTA 2015-02-16 20:35:13 5156 1 Response: PASV 2015-02-16 20:35:13 5156 1 Response: EPSV 2015-02-16 20:35:13 5156 1 Response: SPSV 2015-02-16 20:35:13 5156 1 Response: ESTP 2015-02-16 20:35:13 5156 1 Response: 211 End. 2015-02-16 20:35:13 5156 1 Status: Server does not support non-ASCII characters. 2015-02-16 20:35:13 5156 1 Command: PBSZ 0 2015-02-16 20:35:13 5156 1 Response: 200 PBSZ=0 2015-02-16 20:35:13 5156 1 Command: PROT P 2015-02-16 20:35:13 5156 1 Response: 200 Data protection level set to "private" 2015-02-16 20:35:13 5156 1 Status: Connected 2015-02-16 20:35:13 5156 1 Status: Retrieving directory listing of "/public_html"... 2015-02-16 20:35:13 5156 1 Command: CWD /public_html 2015-02-16 20:35:13 5156 1 Response: 250 OK. Current directory is /public_html 2015-02-16 20:35:13 5156 1 Command: PWD 2015-02-16 20:35:13 5156 1 Response: 257 "/public_html" is your current location 2015-02-16 20:35:13 5156 1 Command: TYPE I 2015-02-16 20:35:13 5156 1 Response: 200 TYPE is now 8-bit binary 2015-02-16 20:35:13 5156 1 Command: PASV 2015-02-16 20:35:13 5156 1 Response: 227 Entering Passive Mode (116,0,23,214,33,198) 2015-02-16 20:35:13 5156 1 Command: MLSD 2015-02-16 20:35:33 5156 1 Error: Connection timed out 2015-02-16 20:35:33 5156 1 Error: Failed to retrieve directory listing

Awesome new feature to automatically download updates to FileZilla, however, instead of in the user'sDownloads folder, the archive ends up in Documents instead. Only a minor nuisance, but still I think this should be corrected.

I've just updated to the latest version of FileZilla. Now it times out everytime and I have been unable to do a successful upload. I know it's the version of FileZilla at fault, because I then tried again, on my laptop, with the previous version still installed and succeeded without any problem at all. Here is the sequence showing where it times out:- Status: Resolving address of hannahmarco.co.uk Status: Connecting to 173.254.28.74:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (173,254,28,74,81,14) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

Since I upgraded to the latest version, I can no longer access my FTP site. It says:

Status: Resolving address of ftp.XXXX.com Status: Connecting to XX.XXX.XXX.XXX:XX... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing of "/public_html/XXXX/XXXXX"... Command: CWD /public_html/ Response: 250 OK. Current directory is /public_html/XXXX/XXXXX Command: PWD Response: 257 "/public_html/XXXX/XXXXX" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (XX,XXX,XXX,XXX,XXX,XX) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing

Up to this morning I have had no difficulties with Filezilla either when uploading or downloading to a site I have been using for year. This morning I updated Filezilla. Immediately I had a popup notice informing me that the licence to this site was not recognised. The notice allowed me to override this. However, I noticed that the check box allowing me to indicate that this site can be trusted in future had not been enabled.

The site I am trying to connect to is run by Freeola.com, and I was attempting a connection to vip4.freeola.net.

This is the log of the attempted connection:-

Status: Resolving address of vip4.freeola.net Status: Connecting to 193.0.158.4:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (193,0,158,4,182,147) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing.

I have included an attachment which is the licence warning I received on a pop up screen.

I am concerned that up to noon today I was able to use your software to connect to this site, as I have been doing for several years, and then with the 'improved' update it is now effectively useless to me.

Steps to reproduce the bug:

1. Select a folder with many subfolder on the server. Make sure you have a folder of the same name on the client with a similar tree structure containing at least a few files in common. Right click and choose "Download"

2. When the first file that already exists is found, the prompt appears asking you what to do.

• Select "Overwrite"
• Check "Always use this action"
• Check "Apply only to current queue"

3. Click OK

Expected: it should download all the rest of the files and never ever ask you again what to do with existing files in the current queue

Observed: every once in a while the "file already exists" dialog appears again. I select "always use this action" and "apply to current queue only" again, and again, but it will still pop up again.

I don't know if this happens when the connection is lost and reestablished with the server. Even if this is the case it is wrong.

I have not been able to access this server with the updated versions of FileZilla - I have asked host and they agree that certificate is there and is correct and in date etc and therefore I should be able to access via TLS and thus a filezilla bug (?)

my version and details

FileZilla Client
----------------

Version:          3.10.1.1

Build information:
  Compiled for:   i686-w64-mingw32
  Compiled on:    x86_64-unknown-linux-gnu
  Build date:     2015-02-01
  Compiled with:  i686-w64-mingw32-gcc (GCC) 4.9.1
  Compiler flags: -g -O2 -Wall -g -fexceptions -std=gnu++11

Linked against:
  wxWidgets:      3.0.3
  GnuTLS:         3.2.21
  SQLite:         3.8.8.2

Operating system:
  Name:           Windows 7 (build 7601, Service Pack 1)
  Version:        6.1
  Platform:       32-bit system

and debug log report - I have to abort it as it sits there and does nothing!

DEBUG

Error:	Directory listing aborted by user
Status:	Resolving address of ftp.websq.uk
Status:	Connecting to 185.52.24.183:21...
Status:	Connection established, waiting for welcome message...
Status:	Initializing TLS...
Status:	Verifying certificate...
Status:	TLS connection established.
Status:	Server does not support non-ASCII characters.
Status:	Connected
Status:	Retrieving directory listing...
Status:	Disconnected from server
Command:	PWD
Response:	257 "/" is your current location
Command:	TYPE I
Response:	200 TYPE is now 8-bit binary
Command:	PASV
Response:	227 Entering Passive Mode (185,52,24,183,85,246)
Command:	MLSD
Error:	Directory listing aborted by user

I can only access via unsecure route which I would rather not

Thank you Sarah