Custom Query (2163 matches)

Hello

I fully reinstalled my Mac OS, and after that - on clear OS X I have a bug: ​https://www.dropbox.com/s/2iauavn25tlmz5i/Screenshot%202017-05-15%2017.00.07.png?dl=0

I am not able to log into a specific site using the latest version of FileZilla.

I have not yet been able to successfully log in to this particular site (216.55.183.227). However, I have been able to do so using other FTP clients such as FTP Voyager using the same configurations (site IP address, port #, password, remote directory, transfer mode, etc.).

The following is typical of what is logged by FZ:

Status: Connecting to 216.55.183.227:21... Status: Connection established, waiting for welcome message... Status: Logged in Status: Retrieving directory listing of "/FC35"... Command: CWD /FC35 Response: 250 CWD command successful Command: PWD Response: 257 "/FC35" is the current directory Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (216,55,183,227,190,31). Command: MLSD Error: The data connection could not be established: ETIMEDOUT - Connection attempt timed out Error: Connection timed out after 61 seconds of inactivity Error: Failed to retrieve directory listing Status: Disconnected from server Status: Connecting to 216.55.183.227:21... Status: Connection established, waiting for welcome message... Status: Logged in Status: Retrieving directory listing of "/FC35"... Command: CWD /FC35 Response: 250 CWD command successful Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (216,55,183,227,157,158). Command: MLSD Error: The data connection could not be established: ETIMEDOUT - Connection attempt timed out Error: Connection timed out after 61 seconds of inactivity Error: Failed to retrieve directory listing

Refresh does not work properly in the new release

I just downloaded FileZilla. I get to the log in screen. The cursor blinks in the cell where I should enter my ftp information, but it does not allow me to enter anything.

I am using a Mac.

using SFTP over port 22 to upload files I changed my login information on my linux server and then I changed my login information in the Site Manager, after clicked 'Connect' and successfully connected to my server, I tired to upload some file onto my server and find out that new upload threads reports login incorrect and caused me banned for 10 minutes due to fail2ban installed on my server. And after I restarted Filezila, the problem is gone.

I found that FileZilla 3.28.0 can't import settings from other PC's FileZilla.xml, both on Windows 10 Pro (version 10.0.15063).

How to reproduce it?

1) make some changes in Settings window, adjust Limit local ports to 1025 and 60000 for example.

2) select Files > Export... > Export Settings and export settings to FileZilla.xml

3) copy FileZilla.xml to another PC, select Files > Import... and select FileZilla.xml then check Settins to import settings.

4) restart FileZilla and you will see everything as default value.

Hello Admin,

Is it able to sync the data from remote FTP site with Filezilla in a scheduled date. Filezilla is a great tool. But we need to download the data everyday, The FTP server is in other country, due to the time difference, we can't download the data in time. If FileZilla can auto sync the data from remote site. it would be much helpful.

Kindly view the image and please check it

​https://drive.google.com/open?id=1cAlldZzcNJ-LJNkDd_di-pLE-3B-sxNK ​https://drive.google.com/open?id=126mbOgB9BbkNRzyMXiY01fqxuiY4qaed

It takes 130 hours to download 4Gb with a 10Mb/s download speed. If I use google drive or Teamviewer to download the same file it takes me 20 minutes or 2 hours for the same file. Try it on this moment also, it will take 8 hours (still to go)

The provider checked the internet connection already, changed the cable and modem. Speedtest result is 11Mb/s almost every test.

What can I do?

Archlinux, Filezilla compiled with wxGTK v. 3.0.3.1. The better decription of the problem is the pictures I attached. I think all fonts of all controls should have the same size like it was with GTK2 build.

Hi,

This comes with new (very last news version).

When you uses this : 1- upload a new version of a file with a different name. 2- after upload : rename the file and give the name of the file which is to be replaced

Before, with previous version, you get : 1- A panel to confirm (existing file with same name : replace) 2- Replacement 3- (in previous-previous) the position into the list was not changing

Now, new ( 3.32.0) you get : 1- A panel to confirm (existing file with same name : replace) 2- Both files are deleted, this most of time (there are conditions which produce the normal - old - behavior, but I could not find exactly the conditions. Note :

• that when this occurs we have two refreshes (since-prev-prev : I have not the version id) of screen while before we were getting this refresh just once.
• with the "just before version" the refresh was not clean because we had, as told, two displays and at the end the user was reaching the top of the list and had to go back manually to the position of the file changed to verify.
• now when it functions normally the file is replaced and focus stays on the file (generally for the two files : I name the new updated with a name so that it will be displayed just before the file to replace into the list). I think that the second display corresponds to the "delete all" invalid phase.

Best regards

Trebly

Since 3.26, we've had a few users report that once they log in and begin to try and transfer files, they are suddenly logged out, and then asked for their password again. Putting in their password again is not accepted (says its incorrect), so now the user cannot do anything else. Closing Filezilla down and opening it back up has no effect.

To make matters worse, in our environment, we use Red Hat's IDM LDAP server (based off of the Free IPA project). When this happens to these users, their account in IDM is locked due to too many failed logins and an administrator has to go into the IDM server and unlock the account.

It keeps transfering the files every time I send FTP no matter if file has changed or not

Hi,

Tried to uploading the data into remote server, Every 19 secs coming up with error. Error : Network Error : software caused connection abort file transfer failed

Is anyone able to help with this please?

Thank you.

I always have to reupload audio files when the program says they were successful. Never fails that I have to upload again.

Hello!

Currently when I upload an image to a specific sub folder, the image is uploaded successfully, but then will not show up on the live site, even after waiting multiple days, and clearing my cache.

The images will work properly when uploaded to the Incoming folder, but not each subfolder within the Incoming folder.

Would you be able to help me figure out why uploading to these folders is not working, even after we get a successful message.

Thank you, Melissa

On starting, FileZilla pops up this error box:

Error loading xml file

The file 'C:\Users\jcarnuccio\AppData\Roaming\FileZilla\filezilla.xml' could not be loaded. Error parsing end element tag at offset 8160.

For this session the default settings will be used. Any changes to the settings will not be saved.

OK

and it looks like all previous settings are lost.

Hey, I having an issue with filezilla on uploading files and editing them from the server. the problem accure on any server and not on specific one. I have tested with diffrent file editors and computers but the problem still stays. this issue very interupt me while working while editing files on live site and the files doesn't uploaded at their full weight.

I have logged the issue while I did try to edit a file and it uploaded only part of the full file (it's not even 0.5mb file..) here is the log:

2018-06-26 10:57:43 21792 3 Status: Starting upload of C:\Users\leon\AppData\Local\Temp\fz3temp-2\index.php 2018-06-26 10:57:43 21792 3 Command: CWD /public_html/itcare 2018-06-26 10:57:43 21792 3 Response: 250 OK. Current directory is /public_html/itcare 2018-06-26 10:57:43 21792 3 Status: Retrieving directory listing of "/public_html/itcare"... 2018-06-26 10:57:43 21792 3 Command: TYPE I 2018-06-26 10:57:43 21792 3 Response: 200 TYPE is now 8-bit binary 2018-06-26 10:57:43 21792 3 Command: PASV 2018-06-26 10:57:43 21792 3 Response: 227 Entering Passive Mode (5,100,252,97,162,223) 2018-06-26 10:57:43 21792 3 Command: MLSD 2018-06-26 10:57:43 21792 3 Response: 150 Accepted data connection 2018-06-26 10:57:43 21792 3 Response: 226-Options: -a -l 2018-06-26 10:57:43 21792 3 Response: 226 4 matches total 2018-06-26 10:58:12 21792 3 Command: TYPE A 2018-06-26 10:58:12 21792 3 Response: 200 TYPE is now ASCII 2018-06-26 10:58:12 21792 3 Command: PASV 2018-06-26 10:58:12 21792 3 Response: 227 Entering Passive Mode (5,100,252,97,168,133) 2018-06-26 10:58:12 21792 3 Command: STOR index.php 2018-06-26 10:58:12 21792 3 Response: 150 Accepted data connection 2018-06-26 10:58:13 21792 3 Response: 226-File successfully transferred 2018-06-26 10:58:13 21792 3 Response: 226 0.315 seconds (measured here), 264.48 Kbytes per second 2018-06-26 10:58:13 21792 3 Status: File transfer successful, transferred 87,358 bytes in 1 second 2018-06-26 10:58:13 21792 3 Status: Retrieving directory listing of "/public_html/itcare"... 2018-06-26 10:58:13 21792 3 Command: TYPE I 2018-06-26 10:58:13 21792 3 Response: 200 TYPE is now 8-bit binary 2018-06-26 10:58:13 21792 3 Command: PASV 2018-06-26 10:58:13 21792 3 Response: 227 Entering Passive Mode (5,100,252,97,157,193) 2018-06-26 10:58:13 21792 3 Command: MLSD 2018-06-26 10:58:13 21792 3 Response: 150 Accepted data connection 2018-06-26 10:58:13 21792 3 Response: 226-Options: -a -l 2018-06-26 10:58:13 21792 3 Response: 226 4 matches total 2018-06-26 10:58:13 21792 3 Status: Directory listing of "/public_html/itcare" successful

If you need any more information please inform me. filezila version 3.33.0

I keep gettying a notice that my SSL cert. is expired. I just applied all new certs. in May and they are posed on the servier and works on other items.

How can I stop this. The check box is grayed out and can not click it.

Hi, Today I opened my FileZilla, as in every day for several years. In the opening, I had an update to be made dating July 23rd, 2018 for the version 3.35.1. I clicked to Update. After a few seconds, an error message appears to me, "an error arrived at the update". I had only the choice of the button "Cancel". I clicked to cancel. Afterward I had no more icon of FileZilla on my desktop, on my fast bar, nothing. I verified those folders of FileZilla.

There were only 3 folders. The first one is: C:\Program Files\FileZilla FTP Client\ with a single entitled file "Uninstall".

The second one is : C:\Users\xxxx\AppData\Roaming\FileZilla\ with 1 SQLITE3 file and 6 XML Documents.

The last one is: C:\Users\xxxx\AppData\Local\FileZilla\ with around 320 PNG files.

I had no execute file, or file to updated. I could not use the software. I restarted the PC and nothing changed. I am not certainly the only one to have had this problem. I would have liked registering you the code of error and the exact text, but I clicked on the button too fast. Sorry.

For now I downloaded the complete version on your site. That works. I had a waste of considerable time for my company.

Claude.

Hello,

I added 315943 files to the queue. Filezilla just cycles through 'elapsed time' and 'Transferring' on two files but not actually transferring them.

I've had this queue trying to transfer for over a week and a half. I've stopped the queue and reinitiated several times.

Initially the transfer was interrupted by the computer being restarted and I haven't been able to resume this transfer. Please let me know if you have any ideas on how to fix this issue. Thank you

MAC OS X SIte Manager Sroll overlap entries

I have to attach screenshot to ticket.

Filezilla on macOS Mojave has a few issues which include the following:

1) Dragging files from a folder to the server causes the client to crash. You can still highlight and click upload by right clicking through the context menu 2) UI issues with the dark theme (it's difficult to see) 3) UI issues with the client size (it starts huge and needs to be resized smaller)

These issues make the client very difficult to use on macOS.

1. The Limit for Concurrent Downloads setting over-rides ALL Global and Individual site settings for Transfers!

2. The Queue Priority setting also over-rides the User setting for Maximum Multiple Connections of Individual for sites.

Flexible User settings are no good if the program takes no notice, like the Concurrent Download Limit setting controls everything to do with transfers. As does the Priority.

Eg. For a Session

• Maximum Simultaneous Transfers = 10
• Limit for Concurrent Downloads = 5
• Limit for Concurrent uploads = 0
• Site 1: 10 Queued transfers, Priority Normal, Maximum Multiple Connections = 3
• Site 2: 10 Queued transfers, Priority High, Maximum Multiple Connections = 3

Process the Queue and five Transfers will all start at once from Site 2; instead of two Transfers from Site 1 and three Transfers from Site 2; This blows-out Site 2 because it has a max number of connections/session of 3. Also, despite the Maximum Simultaneous Transfers being higher, whatever the Limit for Concurrent Downloads is set to, that is the number of transfers that will try to start, not 10. Also, setting the Priority up or down has a similar effect.

My thoughts:

1. Globally: The “Maximum Simultaneous Transfers” should be the only setting to determining the Maximum number of Transfers that FileZilla starts at any one Session. (ps: 10 also seems a bit small in these days of High-speed Broadband).

2. Globally: Limit for Concurrent Downloads should perhaps be Limit for Concurrent Downloads per Site; and determine the maximum number of Transfers to start on any Site at one time, UNLESS the Maximum Multiple Connections is set.

3. Locally: Limit for Concurrent Downloads per Site should not override the Maximum Multiple Connections setting.

4. Locally: Queue Priority should not override the Maximum Multiple Connections setting.

Hope this helps Tranowme

I had been using version 3.37.2 with no problems. Yesterday, FileZilla said there was an update, so I downloaded it and installed it. Version 3.37.3. I then opened it and tried to open a subdirectory on the server so I could download some files to my computer. I tried to open public_html. It didn't open to show the contents. Instead it started downloading the entire subdirectory. I tried opening a few others and the same thing--cannot open them.

When I went to file a bug, I was shown a message that the software was out of date. How can the application not have downloaded the current update? The app gave me 3.37.3 and said I was up-to-date.

I downloaded the adware-free version for 3.37.4 from the Other Options download page (https://filezilla-project.org/download.php?show_all=1) and tried to use it. The same thing happens. After both updates, no subdirectories will open. Clicking twice on a folder downloads the entire subdirectory automatically. I tried right click on a folder and I was shown a list but it has Download selected and there is no Open selection so I can't get to the contents from the list.

If user has dark mode enabled in macOS Mojave the UI does not adhere.

Erro que acontece quando eu faço um upload de uma pasta inteira com várias subpastas e vários arquivos. O aplicado aponta como upload finalizado, mas os arquivos são criados com 0 bytes. Isso foi observado em várias ocasiões ao fazer upload de arquivos. Quando sobe arquivo único, não há problemas, o problema está relacionado quando sobe pastas com subpastas e vários arquivos. Foi observado tanto com arquivos .html, .php, .jpg, .png, .js, .css e outros formatos ainda.

Dear FileZilla Team,

Hope you're doing good!

Kindly let me know, if FileZilla has web based open but secure mechanism like WeTransfer that can be connected to space of private domain space i.e. domain FTP space with backend authentication. And, if it's not there, then will it be possible for you to develop.

Waiting for your kind consideration and revert. Thanks!

BR, AMIT K.

Every time I try to login I see this

Status: Waiting to retry... Status: Resolving address of www.governors-america.com Status: Connecting to 54.236.190.114:21... Status: Connection established, waiting for welcome message... Error: Connection closed by server Error: Could not connect to server

I've looked up other tickets but none of them have had an answer to this problem. I have used filezilla for three years to manage a work website and have never had a problem. I really need to find a solution this week.

Thanks,

KB

Good afternoon All,

I hope you're well

Could you please enable the function which generates a next day statement on a Tuesday each week going forward?

Many thanks, Alexandra Degan Senior Payroll Administrator

New or changed files are randomly not being uploaded when inside folders and dragged over server.

hello sir my ip has been banned without any reason. tried to login information was right but filezilla was crashing so i tried again and again so my ip is banned now so i request to solve it my ip address 2405:204:902e:13e2:186b:ca9a:4fd8:d190 and 49.35.50.238 ipv4

FileZilla_3.39.0_win64-setup.exe works with explicit ftp over TLS if available on our FTP called - pnecftp001.gijima.com but with the latest two versions we are getting an error - 14:06:11 - Error:A certificate in the chain was signed using an insecure algorithm. 14:06:11 - Error: Received certificate chain could not be verified. Verification status is 2. 14:06:11 - Error:Could not connect to server. I have downgraded again so it can work but it is a problem.

For an entire day I was talking to tech support of a hosting company and trying to figure out what's wrong with my connection. Turns out I have so many keys attempting to be used that the server was denying access with this error response:

Error: Server sent disconnect message Error: type 2 (protocol error): Error: "Too many authentication failures" Error: Could not connect to server

If I removed my keys down to just 4 then I was able to connect. This is a huge pain and bug IMO since I should be able to specify on a per-site basis what key to use if needed like my IDE allows which doesn't run into a similar issue.

Possible solution options?

1) In the SFTP key page in settings allow me to click an "Edit Key" button or something that allows me to checkmark off what sites I want it used on.

2) On my site setting page on "Advanced" tab allow me to say "Specify key file" or allow me to specify key file on that screen for use on that site or select a dropdown from available files to use.

Crazy annoying that there isn't an option for this already in FZ.

Hi Team,

This is with regard my XI account.

I'm unable login to XI account as my password not working.User id pcardusr

Could you please help me to get my password reset

I'm using the same password as always and it's not letting me into FileZilla to transfer to my website since my latest update. I need to resolve asap. Here's what I'm getting when I try logging in: Status: Resolving address of thebarnpub.com Status: Connecting to 64.71.34.26:21... Status: Connection established, waiting for welcome message... Status: Insecure server, it does not support FTP over TLS. Command: USER thebarnpub Response: 331 Please specify the password. Command: PASS Response: 530 Login incorrect. Error: Critical error: Could not connect to server

The first time Refresh/F5 is used in a session the Status window shows that the refresh was sent to the server, but then nothing happens. Any subsequent Refresh/F5 does nothing at all. The files and folders are only refreshed on a new connection or reconnection.

I've attached a copy of the Status log up to the point where I started this report. Note line 310 where I clicked the Refresh icon on the Toolbar. When that didn't do anything, I pressed the F5 key, then used the menu to choose View/Refresh. As you can see, Filezilla didn't even acknowledge these additional attempts to refresh.

Before starting this Bug ticked, I searched the Bug reports where I found multiple unresolved tickets starting from 9 years ago about this problem. Is this not important enough to resolve ? I've used numerous FTP clients in the past and every one of them had no problem refreshing during a session.

Filezilla not work same FTP setting is work on core FTP but not work on filezilla

Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listing

FileZilla Client

Version: 3.41.2

Build information:

Compiled for: x86_64-apple-darwin18.2.0 Compiled on: x86_64-apple-darwin18.2.0 Build date: 2019-03-18 Compiled with: Apple LLVM version 10.0.0 (clang-1000.11.45.5) Compiler flags: -Werror=partial-availability -Wall -g -std=gnu++14

Linked against:

wxWidgets: 3.0.5 SQLite: 3.26.0 GnuTLS: 3.6.6

Operating system:

Name: Mac OS X (Darwin 18.5.0 x86_64) Version: 10.14 CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi2 bmi2 adx lm Settings dir: /Users/deepaksaini/.config/filezilla/

I am no longer able to move multiple files at a time, it will only allow me to move 1 at a time

I inadvertantly deleted the Quickconnect information in Filezilla Client and am now unable to reconnect, I get "ECONNREFUSED" My Server is OMC@…. How can i reset my Password please?

I upgraded to 3.42.1 and can no longer get directory listings on TLS connection. This was not happening with previous version of Filezilla.

The error I receive is: Certificate of connection does not match expected certificate.

I cleared the certificate by removing trustedcerts.xml and retrieved a new certificate, but that did not fix the problem. I also cleared cache (from debug tab) and that also did not fix the problem. Evertyhing was working fine until I installed new release (no changes to connections). And it still works with older version of FileZilla.

Log (verbose) snippet follows:

10:22:12	Command:	LIST
10:22:12	Trace:	CTlsSocketImpl::ContinueHandshake()
10:22:12	Trace:	CFtpControlSocket::OnReceive()
10:22:12	Response:	125 List started OK
10:22:12	Trace:	CFtpRawTransferOpData::ParseResponse() in state 4
10:22:12	Trace:	CControlSocket::SendNextCommand()
10:22:12	Trace:	CFtpRawTransferOpData::Send() in state 5
10:22:14	Trace:	CTlsSocketImpl::ContinueHandshake()
10:22:14	Trace:	CTlsSocketImpl::ContinueHandshake()
10:22:14	Trace:	CTlsSocketImpl::ContinueHandshake()
10:22:14	Trace:	TLS Handshake successful
10:22:14	Trace:	Protocol: TLS1.0, Key exchange: RSA, Cipher: AES-256-CBC, MAC: SHA1
10:22:14	Error:	Certificate of connection does not match expected certificate.
10:22:14	Error:	The data connection could not be established: ECONNABORTED - Connection aborted
10:22:14	Trace:	CTransferSocket::TransferEnd(3)
10:22:14	Trace:	CFtpControlSocket::TransferEnd()
10:22:14	Trace:	CFtpControlSocket::OnReceive()
10:22:14	Response:	250 List completed successfully.
10:22:14	Trace:	CFtpRawTransferOpData::ParseResponse() in state 7
10:22:14	Trace:	CFtpControlSocket::ResetOperation(2)
10:22:14	Trace:	CControlSocket::ResetOperation(2)
10:22:14	Trace:	CFtpRawTransferOpData::Reset(2) in state 7
10:22:14	Trace:	CFtpListOpData::SubcommandResult(2) in state 3
10:22:14	Trace:	CFtpControlSocket::ResetOperation(2)
10:22:14	Trace:	CControlSocket::ResetOperation(2)
10:22:14	Trace:	CFtpListOpData::Reset(2) in state 3
10:22:14	Error:	Failed to retrieve directory listing

I have multiple server connections and different servers. Any one I connect to, since I updated filezilla, I get an error - All transfers complete, files could not transfer. So I can't upload anywhere. I need help. Thanks.

Many times a specific file or specific files, whose names do not change over time, need to be uploaded for publishing.

Like in the Seamonkey Suite, which has a pusblish button for uploading the whole page that one is editing in one go, it would be fine if there is one or more publish/Quicktransfer buttons for uploading one's favourite file(s).

Now, one has to manoevre each time through all directories to locate the files. Synchronized browsing and bookmarking helps, but then still scrolling and locating is necessary.

This/these Publish/Quicktransfer button/buttons could be located for instance to the right of the the Quickconnect Bar.

(A) corresponding shortcut key(s) could be assigned to the button(s).

If such a button/these buttons work for one favourite file, such a button could be extended to work for a list of files, for which each time extensive browsing is required.

It would then look like the Publish Button of the Seamonkey Suite, which unfortunately only handles ftp, not sftp or ftps, so if FileZilla is going to do this it would be great!

See also ticket #4333 and #8182.

I've connected to the remove computer correctly. Same as I have on many times. I updated to the latest version yesterday and now this problem. Is there another way to transfer a file?

In the newest FTP client version (3.45.0), when selecting the Refresh button, all folders in the local site view close, and the view jumps to the top of the directory tree. This never used to occur. This is highly irritating as I have to navigate back to the folder in which I was working and dig back into any subfolders I had open after every single refresh.

The Forum registration is not accessible to a blind person using screen reading software.

this is since the new mac osx update catalina. after edit of a download file it takes a long time until filezilla is uploading the file automatically!

Workflow: download a file - open in editor - save -> upload take a long response time

I've tried to get access to our S3 bucket through an http proxy which has username and password restrictions. The debug shows that the connection to the proxy host is being established, but after the 407 response that an authentication is required, the attept failes with "ECONNRESET" - and I don't have a clue why. The user name and password are correct so I assume that this is a kind of misunderstanding between FileZilla Pro and the squid proxy server.

We have a specific site that has successfully used a private key with a passphrase for over 2 years. With 3.46.1, when I try to connect to the site, it no longer asks for the keyphrase, which has always been required, and subsequently the connection fails authentication.

During investigation, I also received errors when look at the site config. The errors related to the private key file. Unfortunately I did not do a screen capture of the error as I needed to access the site asap.

I reverted back to 3.46.0 and immediately everything went back to normal. When connecting to the site the key passphrase was prompted for and once entered I was able to connect to the site with no issue.

As we use this site weekly, I will not be able to update until this bug is fixed.

I opened FileZilla today 12/30/19 and an update popped up, so updated to the latest version. Then I connected and tried to upload a 1gb file like I do weekly. It says "Transferring" for 20 seconds a then times out. I have tried several times and it is the same. Everything was fine before I updated to the latest version today.

Hi

I am a small home-based business owner. My home PC is working from the IP:

163.47.56.184

Please can you set out the reasons why I appear to be banned from your forum? My registered email address with your site is pbbythesea@…. I have never received any communications in regard to problems with my login. In fact I can still access the site from my phone but not my office PC, so it must to tied to my IP and not my username.

Please can you clearly set out why this has happened and what I can do to lift the ban?

Regards,

Paul

After check the option FileZilla > Settings > Interface > Minimize to tray the program shows strange behavior, after minimize the tray icon is created but when you click in the tray icon the screen blink and the program turn unable to open again and there is no popup menu option when perform a left click on the filezilla tray icon. This situation force the user to kill the filezilla process.

Expected action: Able to minimize the program to tray icon running fedora 31 Cinnamon.

(All others programs like telegram, skype, steam go to tray without problems.)

FileZilla: 3.45.1 OS: Fedora 31 Thirty One (x86-64) DE Cinnamon, version: 4.4.8 Kernel: 5.4.13-201.fc31.x86_64 CPU: Intel Core i7-3770K CPU @ 3.50GHz × 4 Memory: 7.5 GiB Video Card: NVIDIA Corporation GK104 [GeForce GTX 680] Driver version: 440.44

I have tried specifying the ASCII editor (EditPlus), putting in the verified location, and selecting Use system's default editor for text files. In both cases, when I select a text file from either the local or remote file list, I get an error (attached). The actual location of the editor is "c:\program files\editplus 3\editplus.exe", but FileZilla is adding a whole bunch of extra characters (see attached). Help!!!

I am trying to connect to our server to upload files and this is what pops up when it is trying to connect and then fails. It is happening on every computer we try:

Status: Connecting to 198.143.160.133:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Logged in Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (198,143,160,133,195,136). Command: MLSD Response: 150 Opening BINARY mode data connection for MLSD Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listing

On MacOSX, when creating a new local folder in the left-most pane, the bug forces you to go up a level.

Example: if I'm on /Users/James/Desktop/ and create a folder called "Test", it will automatically take me to /Users/James/

When displaying any dialogue box (e.g. Settings, Site Manager), there is a lag of 3-5 seconds after making any selection within them, including Ok and Cancel.

This is not occurring in the main window.

This is not new; it has been occurring for a long time in FileZilla (> 1 year). I'm on macOS 10.14.6. (No other app behaves this way.)

I used to be able to connect to my sftp server and now I can't with a strange error message:

Error:	The first host key type supported by the server is ssh-rsa, which is no longer secure. Aborting connection.

I tried switching the server to use a ecdsa host key and I got the error message:

Error:	The first host key type supported by the server is ecdsa-sha2-nistp521, which is no longer secure. Aborting connection.

Thanks, Alex

This issue happens intermittently, this happens:

• only for some folders on mounted CIFS shares
• only sometimes: same folders can be accessed one moment but become unreachable a minute later
• only in "Local site" view: at the same time client successfully continues downloads in the same folder and can Import/Export configurations from/to the same folders

I haven't been able to find reflection of error in any of the logs: /var/log/messages, kern.log, syslog, built-in Filezilla Logging from the Settings does not have any traces.

Buenos dias, soy nuevo con este programa y he usado ya varios métodos para arreglar el problema que me presenta al momento de usar el scaner por medio de filezilla, ya que me da ese error adjunto en la imagen espero puedan brindarme una solucion

Dear Support

I am trying to assist one of the directors of our company onto your platform to upload some work for a client. The client has sent us a pdf manual which guides us how to connect via site manager. Upon following the instructions, the password prompt does not come thus allowing us not being able to connect. I would appreciate a swift response as this is a matter of urgency. Look forward hearing back from you soon.

Thanks Hassan TPBennett TechSupport Team

When you update Filezilla via the window that appears whilst using it, the content inside the "Custom filetype associations" textbox is sometimes lost. This has happened to me twice within the last month. When it first happened, I slowly repopulated it there and then but the most recent update has erased them again. I have not changed any settings recently that will affect this.

I wish I can provide steps to replicate this, however this doesn't happen on every update.

I uploaded modified files from Local to Remote Site/Website as before but this time the changes do not appear in my Website on the Internet.

Boa noite. Comprei a versão do filezila MAIS NOVA PAGUEI 27,00 REAS COM CARTÃO DO MEU FILHO, O NOME DELE É ANDRE LUIS ARAUJO , MAS NÃO RECEBI A CHAVE PARA PODER BAIXAR NO MEU COMPUTADOR. POR GENTILEZA QUEIRA ME ENVIAR URGENTE, POIS PRECISO DISSO PARA TRABALHAR NO MEU SITE.

OBRIGADA

I have tried to connect to my server on two different computers and this is the message I receive on both. I have spoken with my webmasters, and the server information is correct. How do I fix this with FileZilla? Below are the error messages I receive. Thank you.

Status: Connecting to 67.225.147.34:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Logged in Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (67,225,147,34,236,134). Command: MLSD Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listing Status: Disconnected from server Status: Connecting to 67.225.147.34:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Logged in Status: Retrieving directory listing...

Hello, the S3 Secret Access Key is not saved anymore between sessions. Connecting works, but there is no access possible. This is occurring since we upgraded our installation yesterday. This is very annyoing. Thank you very much! Wolfgang

Please update the OpenSSL library inside FileZilla Server, the current version contains known vulnerabilities, and I don't know a way of updating the version in production.

I am having rouble activating the software. I did the installation and put in the requested credentials, host, domain and port info, etc... and I get the below error message: Error: GnuTLS error -110 in gnutls_record_recv: The TLS connection was non-properly terminated. Status: Server did not properly shut down TLS connection Error: Could not read from socket: ECONNABORTED - Connection aborted Error: Disconnected from server

When I try to connect the server it present the following messages, other people that has access to the host can connect normally:

Status: Resolving address of ftp.brasilnutrishop.com.br Status: Connecting to 209.188.87.180:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 6 of 50 allowed. Response: 220-Local time is now 12:21. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: AUTH TLS Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of ftp.brasilnutrishop.com.br Status: Connecting to 209.188.87.180:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 7 of 50 allowed. Response: 220-Local time is now 12:21. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: AUTH TLS Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server

Hi Team,

I Signed up for the FileZilla today and I am unable to access the details of HOST ID and PORT ID. While I am trying to search the details to login on my desktop application regarding this, I find it difficult to get the details of HOST ID and PORT ID to access in the server application on my laptop. I am a first time user. Can you please send me the details of HOST and PORT ID for logging into that and suggest me how to proceed with this.

Please need this needfully.

Thanks, Srujan Kumar

In previous versions of filezilla, ive been able to login to an ftp site automatically via sitemanager, then select manual transfer from the Transfer menu, select a file to upload manually, and set the associated options for the upload, then just click the ok button, and the file would upload "automatically" without me having to put in the login details, as it would automatically use the login details for the currently logged in session.

This process no longer seems to work in filezilla 3.50.0, ive been scractching my head over why my file was not succesfully uploading, as in the past it would just automatically work.

i tried experimenting with the settings on the manual transfer menu, but i can only get the login details to fill in correctly if i fiddle about a bit.

The actual sequence i need to follow to get the correct login details to be pre-filled, is a bit bizarre, and i shouldnt need to do this, it should follow the same behaviour as it always did in the past which was to default to the using the login details etc for the currently logged in server.

Here is what i need to do now, to get it to fill in the correct login details when i switch to manual transfer, when i am already logged into a server:

I need to click the "use server from site manager" radio button then the "Select Server" button and select the same server that i am currently logged into. This on its own does not fill in the password, as you would expect, instead, i then need to go back and click the "Use server currently connected to" radio button, and then it fills in the password field correctly.

This is a pretty odd bug, i hope you can fix this as its very annoying.

When i search in one tab then open another tab , when second tab shows blank content , So i need to again Press(Cntl + F) and clear the search bar then tab shows directory list. So i think when new tab opens why search filter applies by default to it.

I reported this bug on ​lets encrypt and was told that it's a Filezilla bug

Reproduction steps, taken from the internal documentation for my company, which I've written, doing dns verification method, on windows 10, uploading to centos, using latest version of Filezilla, over sftp.

1. ​Download certbot for windows and run it in Powershell as administrator

2. do this command

certbot certonly --manual --preferred-challenges=dns --email examil@example.com --server https://acme-v02.api.letsencrypt.org/directory --agree-tos --manual-public-ip-logging-ok -d *.example.com -d example.com

3. Once done the certificates will be downloaded to C:/Certbot, upload everything inside that folder to /etc/letsencrypt . Override all existing files in that folder, if that folder doesn't exist, create it.

Okay now when doing this

Note: make sure that the files inside C:\Certbot\live\example.com are uploaded correctly to /etc/letsencrypt/live/example.com because often filezilla fails to upload those

if I just upload what's in certbot folder to the empty /etc/letsencrypt/live/, only the readme file will be uploaded. All other files get uploaded correctly

If I then go to C:\Certbot\live\example.com And upload to /etc/letsencrypt/live/example.com everything gets uploaded correctly.

So it's not a permission error. Does anyone have a clue what's happening?

It ftp's fine from the desktop with WIN 10 to our master Website www.biblebelievers.org.au

It will not connect from the desktop connect to our secondary Website biblebelievers.worthyofpraise.org

Please advise and assist.

ags@…

Anthony Grigor-Scott

I'm using version 3.50.0 for updating website files on the server.

At present I can't rely on FileZilla to overwrite files reliably. The only sure way to do so is to delete the existing file on the server and then upload the new one.

Sometimes the first "Upload" click on the client-side file has no effect at all. More times there is a change to the date of the server file but it still is not the same size as the client-side file.

Surely, an overwrite ought to be total - and totally reliable.

Dear Filezilla Developers,

we work for a German federal government agency and have been using Filezilla server for a long time. We would like to continue using Filezilla since we are satisfied with Filezilla server and haven’t had a single problem until recently.

Currently one can not configure the cipher suites that Filezilla Server uses which according to BSI doc TR-02102-2 [2] poses a security risk and should therefore be changed.

The only post on configuring cipher suites - that we were able to find - is from 2016 [1].

In the post Tim Kosse says that..

• a feature to configure the cipher suites is not planned
• people who need to configure this should change the source code and compile their own versions of Filezilla

However, since 2016 new guidelines – like the one mentioned above - have emerged that require the usage or blocking of specific cipher suites when using TLS 1.2.

For example, German companies are recommended to follow the guidelines published by Federal Office for Information Security (german abbreviation: BSI). The guideline [2] lists a table of recommended cipher suites in section 3.3.1 "Cipher-Suiten" and explicitly discourages the use of all other ciphers.

Since most of German companies have to comply with the BSI guidelines Filezilla server could no longer be used. We expect other European countries to adopt similar guidelines in the near future making this feature quite urgent.

Since recommendations on cipher suites occur more often nowadays the use of a static set of cipher suites maintained by Filezilla doesn’t look like a modern solution anymore. Users of Filezilla server should be able to change the allowed cipher suites without having to recompile the software. A similar feature has already been requested in Ticket #11134 [3].

Is this feature perhaps already in development or is something similar on your scope for the next year?

We would greatly appreciate an answer to this ticket by Monday 12:00 UTC+2 since we have to discuss this issue with our management that day.

Best Regards and greetings from Germany Jonas

[1] "Weak Cipher Supported" Filezilla forum post from 2016 ​https://forum.filezilla-project.org/viewtopic.php?t=41686https://www.bsi.bund.de/SharedDocs/Downloads/DE/BSI/Publikationen/TechnischeRichtlinien/TR02102/BSI-TR-02102-2.pdf?__blob=publicationFile&v=10

[2] BSI Recommendation - Cipher suites for TLS 1.2 ​https://www.bsi.bund.de/SharedDocs/Downloads/DE/BSI/Publikationen/TechnischeRichtlinien/TR02102/BSI-TR-02102-2.pdf?__blob=publicationFile&v=10

[3] Ticket #11134 "Disable support for weak ciphers when using TLS 1.2" from 2016 ​https://trac.filezilla-project.org/ticket/11134

Dear Sir,

I would like to make a proposal for automatic uploads of small files to avoid the popup window requesting confirmation.

I have been using this patch since quite some time now and I saw that many people over time keep asking for that. I also know this was already discussed several times.

Anyhoo, this patch includes a safe upload (avoiding file corruption) of the modified files and only applies to files smaller than 1MB. NB: The current patch is quite simple and do not provide any customization of the parameters (e.g. user could chose the max size for automatic upload or to disable/enable the feature by default)

Thank you for your consideration.

Best regards, Marco

Hello, I have FileZilla installed on 2 windows 10 desktops. Both have the same quick connect connection. One desktop can open excel files in FileZilla, the other desktop you need to transfer file locally in order for it to be opened. Can we do a remote session so you can see the issue more clearly?

Thank you

Steps to reproduce:

1. Go to Site Manager; edit or create a site
2. For "Protocol" choose SSH, and for "Logon type" choose "key file"
3. Click the "Browse..." button to browse for a key file
4. Browse to a directory that contains a private key file whose name does not contain any dot
5. In the file type dropdown selector at the bottom (by default "ppk files") select "All files"

Expected: Since I have selected "All files", all files in the folder should be shown. Since there is a valid file as per step 4 (the fact that it has no extension should be irrelevant), that file should be shown, among others if any.

Observed: The file is not listed.

The file is readable by my user. If I rename the file so it has ANY extension (e.g. "mykeyfile.wtf" instead of just "mykeyfile"), then the file is listed. And in this case I have tried selecting it and it works, confirming that it is a valid file (but this is not relevant because invalid files are also listed and you can choose them, then you'll get an error message when you try to use them).

So, when "all files" is selected, you show files with any extensions, but only if they do have an extension, that is, if the file name contains at least one dot. That makes no sense and it's something I've never seen anywhere else.

I am trying to log into my server of WWW.Torchlakeca.com but when it attempts the login it is using a different server name and I don't know where it got that name. It is using www.torchlskeca.com Somehow the A was replaced with an S???

Status: Connecting to www.torchlakeca.com through FTP proxy Status: Resolving address of www.torchlskeca.com Status: Connection attempt failed with "EAI_NONAME - Neither nodename nor servname provided, or not known". Error: Could not connect to server Status: Waiting to retry... Status: Connecting to www.torchlakeca.com through FTP proxy Status: Resolving address of www.torchlskeca.com Status: Connection attempt failed with "EAI_NONAME - Neither nodename nor servname provided, or not known". Error: Could not connect to server

Here is my Filezilla information: FileZilla Client

Version: 3.51.0

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2020-10-20 Compiled with: x86_64-w64-mingw32-gcc (GCC) 8.3-win32 20190406 Compiler flags: -O2 -g -Wall -Wextra -pedantic -ffunction-sections -fdata-sections -Wno-cast-function-type

Linked against:

wxWidgets: 3.0.6 SQLite: 3.31.1 GnuTLS: 3.6.15

Operating system:

Name: Windows 10 (build 18363), 64-bit edition Version: 10.0 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi bmi2 lm Settings dir: C:\Users\msr\AppData\Roaming\FileZilla\

Hi, Could you help explain possibly why our file folders keep disappearing with all of our images in them for our website? It happened yesterday afternoon and we started rebuilding and it just happened again. Thank you, Emily Cooksey emily@…

Since last version deployed with SCCM on our enterprise computers (3.51.0). When checking the settings, I've discovered that the proxy password is now displayed in clear text instead of stars !

Path: Menu "Edit" > "Settings..." > "Connection" > "FTP" > "FTP Proxy" > field "Proxy password" at the end of the page. (see attached printscreen)

This cause a security breach from our enterprise perspective and prevent us to use your product.

We are running Windows 10 1803 and 1909 64b.

Details: FileZilla Client

Version: 3.51.0

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2020-10-20 Compiled with: x86_64-w64-mingw32-gcc (GCC) 8.3-win32 20190406 Compiler flags: -O2 -g -Wall -Wextra -pedantic -ffunction-sections -fdata-sections -Wno-cast-function-type

Linked against:

wxWidgets: 3.0.6 SQLite: 3.31.1 GnuTLS: 3.6.15

Operating system:

Name: Windows 10 (build 17134), 64-bit edition Version: 10.0 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi bmi2 adx lm Settings dir: C:\Users\\AppData\Roaming\FileZilla\

To reproduce:

1. Upload a folder that contains some empty folders
2. Upload it again

Expected behavior:

• the first time, if the subfolders don't already exist on the server, they will be created
• the second times, no folders will be created on server as they already exist.

Nothing should be listed in "failed transfers" as no transfer has failed

Observed: After the second time (or already the first if any if the empty folders already existed on the server), the empty folders will be listed in the "Failed transfers" tab. That makes no sense whatsoever because you don't upload an empty folder, you create it on the server. When "uploading" a folder, if it already exists on the server, you either know that by requesting the listing beforehand and hence shouldn't have to attempt creating it, or you try to create it anyway and detect that it already exists because you fail to create it. Either way, that's not an error and it shouldn't be listed as a failed transfer. The only case where a folder should be listed as a failed transfer is if you fail to create it on the server but it does not already exist. Additionally:

• the "reason" column says "Creating directory". That makes no sense either. You are saying that you failed to upload a directory because "creating directory".
• When I have failed transfers, usually what I do is: reset and requeue all, and then process the queue again. This results in the folders showing up again in failed transfers. So, it looks like there was some error creating the folders on the server and that errors keeps happening and cannot be fixed. And none of that is true: there is no error to begin with, the folders simply already exist.

Note that if the folders contain files, none of this happens. All is uploaded as expected and nothing is listed under failed transfers. As expected.

I'm setting priority as high because false errors are as bad as failing to detect real errors. If an error log of any kind is polluted with false positives that I have to ignore, I'll end up missing real errors.

I think this is a regression, I hadn't observed this until recently.

Remote directory tree is no longer refreshing after installing the 3.51 update. 3.50 was working fine. After 3.51 refresh issue i tried to revert back to 3.50 but no longer had access to the 3.50.exe installer.

Next tried the latest beta 3.52.0-beta1, but getting same refresh issue.

Only resolve was to restart FZ, which causes extra work as I have to export active queued and successful transfers.

Status: Connecting to hssftp.azdhs.gov... Error: fzsftp could not be started Error: Could not connect to server Status: Waiting to retry... Status: Connecting to hssftp.azdhs.gov... Error: fzsftp could not be started Error: Could not connect to server

Neue Version 3.52.0.5 installiert. Seitdem übernimmt Filezilla nicht mehr das Datum beim Herunterladen der Datei (obwohl Haken bei "Änderungszeitpunkt der übertragenen Dateien beibehalten" aktiviert ist in Übertragungen).

Hi,

it seems that v3.52.0.5 is unable to move (rename) a file when a file with same name exists in the destination directory. This is the error:

Error: mv /source/directory/TESTFILE /destination/directory/TESTFILE: received failure with description 'Failure'

TESTFILE is an empty text file; /destination/directory already contained a file named TESTFILE.

Trying the same operation with sftp CLI (rename /source/directory/TESTFILE /destination/directory/TESTFILE) the operation succeeds.

Optimal would be asking whether overwrite or not, which neither the sftp command does; 'Failure' looks like a bug to me.

Thanks!

FileZilla Client

Version: 3.53.1

Build information:

Compiled for: x86_64-apple-darwin20.3.0 Compiled on: x86_64-apple-darwin20.3.0 Build date: 2021-03-22 Compiled with: Apple clang version 12.0.0 (clang-1200.0.32.29) Compiler flags: -O2 -g -Wall -Wextra -pedantic -O2 -g -Wall -Wextra -pedantic -Werror=partial-availability

Linked against:

wxWidgets: 3.0.6 SQLite: 3.31.1 GnuTLS: 3.6.15

Operating system:

Name: Mac OS X (Darwin 19.6.0 x86_64) Version: 10.15 CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi bmi2 adx lm Settings dir: /Users/mihai/.config/filezilla/

### STEPS TO REPRODUCE ###

1. open a remote site
2. right click on a file
3. select File permissions
4. click inside 'Numeric value' input
5. type any number (eg: 777)

Result - application crashes

Hi guys, We’ve been having trouble dragging our PDFs into FileZilla for a number of weeks now. When we drag the PDFs in, FileZilla either closes altogether or they all go into the “unsuccessful transfers” folder. The only way to get around this is to delete the app, reboot our computers and re download/re open. What’s happening? Please can you look into this for us. Thanks, Evan

FTPES server Directory Listing fails using FileZilla 3.53.1 Login to server is successful yet directory listing fails. .... 16:39:52 Command: PORT 172,29,23,55,23,253 16:39:52 Response: 550 PORT command not allowed. Connecting to a remote IP (172.29.23.55) is not allowed. demo2 tried an apparent F X P transfer. 16:39:52 Error: Failed to retrieve directory listing ....

When performing exact same test using for example Cyberduck same works flawlessly and directory content is shown.

After a recent update (in OpenSUSE), this error message shows up every time I start FileZilla.

There are at least two issues here: the one that causes the error, and the fact that the error message doesn't give enough information. What file? Where?

I moved recently for CA to NV if that mmakes a difference. I've been uploading to my website using 'Quickconnect' for years.

Somehow I cannot find my password so I can't connect and upload to my website (www.rapiddog.net).

I believe my ID is 'rapidog'.

Tried using this but no 'Filezilla server' file id there.

C:\Users\{username}\AppData\Roaming\FileZilla Server\

Can you reset this for me? I'm in truble if my clients doion't know what's up...

Hi there, I opened an html page for editing. Then I closed it, but needed to open it again to correct a couple of mistakes. However, FileZilla opened an empty local file for editing instead of the original html page.

The question: where does it download a file that was opened for editing in Windows? I tried searching the location, but couldn't find anything despite xml conf files for Filezilla.

I currently use FileZilla with one company and need help to set up another company.

Hi, I always receive an error message when opening Filezilla on my Windows7 64-bit PC. The message says: "The file 'C:\{username}\AppData\Roaming\Filezilla\filezilla.xml' could not be loaded. No document element found at offset 40678. For this session the default settings will be used. Any changes to the settings will not be saved.

I've seen previous tickets you've said to "repair" the xml file in a text editor, but not stated what exactly to repair it with. When I open my filezilla.xml file in textedit, there is no content.

What should it contain?

Thanks. Debs

When building filezilla 3.55.0 I see the following error:

gmake[2]: Entering directory '/scratch/net/filezilla/work/filezilla-3.55.0/src/commonui' /bin/sh ../../libtool --mode=link g++ -g -O2 -no-undefined -release 3.55.0 ../engine/libfzclient-private.la -Wl,-R/usr/pkg/lib -L/usr/pkg/lib -lfilezilla -lpthread -lpugixml -Wl,-z,relro -Wl,-z,now -L/usr/pkg/lib -Wl,-R/usr/pkg/lib -L/usr/lib -Wl,-R/usr/lib -L/usr/X11R7/lib -Wl,-R/usr/X11R7/lib -o libfzclient-commonui-private.la -rpath /usr/pkg/lib libfzclient_commonui_private_la-buildinfo.lo libfzclient_commonui_private_la-cert_store.lo libfzclient_commonui_private_la-chmod_data.lo libfzclient_commonui_private_la-file_utils.lo libfzclient_commonui_private_la-filter.lo libfzclient_commonui_private_la-fz_paths.lo libfzclient_commonui_private_la-ipcmutex.lo libfzclient_commonui_private_la-local_recursive_operation.lo libfzclient_commonui_private_la-login_manager.lo libfzclient_commonui_private_la-remote_recursive_operation.lo libfzclient_commonui_private_la-site.lo libfzclient_commonui_private_la-site_manager.lo libfzclient_commonui_private_la-updater.lo libfzclient_commonui_private_la-updater_cert.lo libfzclient_commonui_private_la-xml_cert_store.lo libfzclient_commonui_private_la-xml_file.lo -lrt libtool: link: unable to infer tagged configuration libtool: error: specify a tag with '--tag'

Locally, I used a workaround patch (attached). Please fix this properly. Thank you!

I enter with the same mode I used in the past but I always receveid the same error message. I insert: HOST: ftp.gruppobotanicolivornese.it NOME UTENTE: 2038272@… PASSWORD: the same to my dayli access to Aruba but evry time I receave the same error message here indicated: "Tentativo di connessione con "EAI_NONAME - nome nodo e nome server non forniti, o sconosciuti" non riuscito ERRORE - Impossibile collegarsi al server. but I repeat: I work as I have always done

When attempting to download files over FTP using the queue the download fails with the error "No such file or directory".

This appears to only happen to files with colons in their name and only if the files are added to the queue before they are downloaded.

Sample filenames that fail:

1410488582.H473970P287028.slmp-001-001.sub-domain.domain.com,S=28627:2,S
1416539102.H702473P565036.slmp-001-001.sub-domain.domain.com,S=4132:2,S
1429859102.H103707P208334.slmp-001-001.sub-domain.domain.com,S=10776:2,S

Filename: 1610943074.M291083P16808.slmp-001-001.sub-domain.domain.com,S=3489,W=3545:2,

Sample Connection Log (Processed from Queue):

Status:	Resolving address of ftp.domain.com
Status:	Connecting to 255.255.255.255:21...
Status:	Connection established, waiting for welcome message...
Response:	220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
Response:	220-You are user number 1 of 50 allowed.
Response:	220-Local time is now 14:34. Server port: 21.
Response:	220-This is a private system - No anonymous login
Response:	220-IPv6 connections are also welcome on this server.
Response:	220 You will be disconnected after 15 minutes of inactivity.
Command:	AUTH TLS
Response:	234 AUTH TLS OK.
Status:	Initializing TLS...
Status:	Verifying certificate...
Status:	TLS connection established.
Command:	USER username
Response:	331 User username OK. Password required
Command:	PASS *********
Response:	230 OK. Current restricted directory is /
Command:	OPTS UTF8 ON
Response:	504 Unknown command
Command:	PBSZ 0
Response:	200 PBSZ=0
Command:	PROT P
Response:	200 Data protection level set to "private"
Status:	Logged in
Status:	Starting download of /mail/domain.com/administrator/cur/1610943074.M291083P16808.slmp-001-001.sub-domain.domain.com,S=3489,W=3545_2,
Command:	CWD /mail/domain.com/administrator/cur
Response:	250 OK. Current directory is /mail/domain.com/administrator/cur
Command:	TYPE I
Response:	200 TYPE is now 8-bit binary
Command:	PASV
Response:	227 Entering Passive Mode (255,255,255,255,144,137)
Command:	RETR 1610943074.M291083P16808.slmp-001-001.sub-domain.domain.com,S=3489,W=3545_2,
Response:	550 Can't open 1610943074.M291083P16808.slmp-001-001.sub-domain.domain.com,S=3489,W=3545_2,: No such file or directory
Error:	Critical file transfer error
Status:	Disconnected from server

Sample Connection Log (Downloaded Directly):

Status:	Resolving address of ftp.domain.com
Status:	Connecting to 255.255.255.255:21...
Status:	Connection established, waiting for welcome message...
Response:	220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
Response:	220-You are user number 1 of 50 allowed.
Response:	220-Local time is now 14:42. Server port: 21.
Response:	220-This is a private system - No anonymous login
Response:	220-IPv6 connections are also welcome on this server.
Response:	220 You will be disconnected after 15 minutes of inactivity.
Command:	AUTH TLS
Response:	234 AUTH TLS OK.
Status:	Initializing TLS...
Status:	Verifying certificate...
Status:	TLS connection established.
Command:	USER username
Response:	331 User username OK. Password required
Command:	PASS *********
Response:	230 OK. Current restricted directory is /
Command:	OPTS UTF8 ON
Response:	504 Unknown command
Command:	PBSZ 0
Response:	200 PBSZ=0
Command:	PROT P
Response:	200 Data protection level set to "private"
Status:	Logged in
Status:	Starting download of /mail/domain.com/administrator/cur/1610943074.M291083P16808.slmp-001-001.sub-domain.domain.com,S=3489,W=3545:2,
Command:	CWD /mail/domain.com/administrator/cur
Response:	250 OK. Current directory is /mail/domain.com/administrator/cur
Command:	TYPE I
Response:	200 TYPE is now 8-bit binary
Command:	PASV
Response:	227 Entering Passive Mode (255,255,255,255,183,64)
Command:	RETR 1610943074.M291083P16808.slmp-001-001.sub-domain.domain.com,S=3489,W=3545:2,
Response:	150 Accepted data connection
Response:	226-File successfully transferred
Response:	226 0.000 seconds (measured here), 10.27 Mbytes per second
Status:	File transfer successful, transferred 3,489 bytes in 1 second
Status:	Disconnected from server

I anticipate this bug has something to do with the way filenames are processed from the queue. From the above logs you can see the same file name is changed when processed from the queue.

1610943074.M291083P16808.slmp-001-001.sub-domain.domain.com,S=3489,W=3545:2,

becomes

1610943074.M291083P16808.slmp-001-001.sub-domain.domain.com,S=3489,W=3545_2,

It seems that the colon (:) in the filename is translated to an underscore (_) resulting in the server appropriately responding with "No such file or directory".

I anticipate this translation is performed so the file can be stored on a local Windows system that prevents the use of colon's in file names. However it appears that the code incorrectly translates the filename on the server as well and this only happens when the file is processed from the queue rather than a direct download.

Client information:

Version:          3.55.1

Build information:
  Compiled for:   x86_64-w64-mingw32
  Compiled on:    x86_64-pc-linux-gnu
  Build date:     2021-08-09
  Compiled with:  x86_64-w64-mingw32-gcc (GCC) 8.3-win32 20190406
  Compiler flags:  -O2 -g -Wall -Wextra -pedantic -ffunction-sections -fdata-sections -Wno-cast-function-type

Linked against:
  wxWidgets:      3.0.6
  SQLite:         3.31.1
  GnuTLS:         3.6.15

Operating system:
  Name:           Windows 10 (build 17134), 64-bit edition
  Version:        10.0
  Platform:       64-bit system
  CPU features:   sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi bmi2 adx lm
  Settings dir:   C:\Users\UserName\AppData\Roaming\FileZilla\

Finally, I recently updated to 3.55.1 from a version 3.52.2. This bug was not present in that previous version so I anticipate it has been recently introduced somehow.

I have confirmed downgrading to version 3.52.2 resolves this issue while upgrading to 3.55.1 causes the issue to re-appear.

After a quick review of the source code in trunk (r10397) I discovered in /src/interface/QueueView.cpp on line 2974 in method CQueueView::ReplaceInvalidCharacters a code-site that may be responsible for swapping colons for underscores however as I do not have sufficient experience with the FileZilla codebase I'm uncertain if this is relevant.

std::wstring CQueueView::ReplaceInvalidCharacters(std::wstring const& filename, bool includeQuotesAndBreaks)
{
	auto& options = *COptions::Get();
	if (!options.get_int(OPTION_INVALID_CHAR_REPLACE_ENABLE)) {
		return filename;
	}

	wchar_t const replace = options.get_string(OPTION_INVALID_CHAR_REPLACE)[0];

	std::wstring ret = filename;
	for (auto & c : ret) {
		if (IsInvalidChar(c, includeQuotesAndBreaks)) {
			c = replace;
		}
	}
	return ret;
}

Further review of that source file shows that line 359 may also be related, but again I don't have sufficient experience with the codebase to know for certain.

An ideal patch would preserve the server file-name in the queue while changing it locally to be compatible with Windows filenames.

If any additional information is required to resolve this please let me know.

To the development team, great work on FileZilla I've been using it for years and this is the first time I've encountered a (minor) bug. Thank you for your hard work.

Esteemed,

After upgrading Filezilla Pro to version 3.56.0 we can no longer connect via FTP to our S3 buckets on AWS.

Error:

16:08:32 Erro: Falha na obtenção da lista de pastas 16:08:32 Estado: Obtendo lista de pastas... 16:08:32 Estado: A resolver o endereço de s3.dualstack.us-east-1.amazonaws.com 16:08:32 Estado: Conectando 52.217.41.118:443... 16:08:32 Estado: Conexão estabelecida, iniciando o TLS... 16:08:33 Erro: Failed to extract certificate trust path 16:08:33 Estado: Tentativa de conexão falhou com "ECONNABORTED - Conexão cancelada". 16:08:33 Erro: Desconectado do servidor: ECONNABORTED - Conexão cancelada 16:08:33 Erro: Falha na obtenção da lista de pastas

Please check it out.

Looking forward to it and thank you.

Hello good Morning!

When I drag files up to FTP via filezilla, filezilla just closes, like a general crash. It's a lot to click and drag, but this way I can't work.

FileZilla Client

Version: 3.56.2

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2021-10-27 Compiled with: x86_64-w64-mingw32-gcc (GCC) 10-win32 20210110 Compiler flags: -O2 -g -Wall -Wextra -Wno-deprecated-copy -ffunction-sections -fdata-sections -Wno-cast-function-type

Linked against:

wxWidgets: 3.0.6 SQLite: 3.35.5 GnuTLS: 3.7.2

Operating system:

Name: Windows 10 (build 19043), 64-bit edition Version: 10.0 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx aes pclmulqdq lm Settings dir: C:\Users\armaz\AppData\Roaming\FileZilla\

Hello! When I start FileZilla I became the Message that a new version is arrived from FileZilla! When I download and installed the new Filezilla I became all three seconds another Message that the Installation go wrong! Than i install the old Version! Than I become the same Message as before that a new version is arrived! When I installed the new version again! Than i become the Messages that the installation dont work again!

Can you help me?