Custom Query (2164 matches)

FileZilla client uses the default SSH agent, which is really useful. However, when the SFTP server in question only allows password authentication, the prior key authentications by the SSH agent used by FileZilla will prevent a connection (and no password is prompted).

As a workaround I have to temporarily shut the SSH agent down when using FileZilla with password-only SFTP servers.

A solution to this issue could be the introduction of a password-only auth option field or a toggle for using the SSH agent for a server.

пытался войти , выдало ошибку 530 , искал в ютубе и на форумах как ее исправить , ничего не помогло , надеюсь на вашу помощь.

I have set the Master Password and on some occasions, even though I know it is correct it has not been accepted. I know it is correct as it is the same password that I put in to reset the master password.

I enter with the same mode I used in the past but I always receveid the same error message. I insert: HOST: ftp.gruppobotanicolivornese.it NOME UTENTE: 2038272@… PASSWORD: the same to my dayli access to Aruba but evry time I receave the same error message here indicated: "Tentativo di connessione con "EAI_NONAME - nome nodo e nome server non forniti, o sconosciuti" non riuscito ERRORE - Impossibile collegarsi al server. but I repeat: I work as I have always done

I have a few downloads where the orig filesize is 11 gb. The download window says 100% and the filesize is about 6GB higher than the original.... :( And it keeps on going and going..... What gives with that?

selecting edit on a .txt file notepad is used, even thought the default system editor for my .txt files is notepad++

Filezilla client shows the notepad++ icon against the files.

FileZilla Client

Version: 3.55.1

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2021-08-09 Compiled with: x86_64-w64-mingw32-gcc (GCC) 8.3-win32 20190406 Compiler flags: -O2 -g -Wall -Wextra -pedantic -ffunction-sections -fdata-sections -Wno-cast-function-type

Linked against:

wxWidgets: 3.0.6 SQLite: 3.31.1 GnuTLS: 3.6.15

Operating system:

Name: Windows 10 (build 19042), 64-bit edition Version: 10.0 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi bmi2 adx lm Settings dir: C:\Users\xxxxxxx\AppData\Roaming\FileZilla\

When you create a new Site in Site Manager you have to insert "host" value filling in address and port text fields.

In many cases can happends that for more than one Site the same host is used (usually because more than one website is hosted on a single server) and, in some unfortunate circumstances, the IP address of the server change; when this occour I need to update all Site Manager Sites to reflect the new IP.

It will be great if I had a "Host List Manager", where I can create a Host with it's Label, IP, port, access type and so on, and then use this "Host Object" in the Site Settings as an alternative to directly input IP and port.

So, when the Host IP would change, I just need to update the "Host Object" to make all relate Sites use new IP or new Authentication certificate ecc, ecc..

Since this is something really useful for Agencies and Professionals, maybe could be more appetible for Pro version, but litteraly, I would pay for it!

I have an FTP server with HostGator provider (CENTOS 7.9 Linux) and I only used their tool to access it. After an update it managed to connect, but it mistranslated the filenames. Now it connects and lists folders and files that I renamed to solve the translation issue. But now I can't download, just through Windows Explorer (windows 10 Pro x64). Not to mention that it was much slower to access via FileZilla and it was super fast. Now I can only transfer (upload and download) these files via Windows Explorer, for new ones I can use FileZilla.

Estado: Listagem do diretório "/" bem sucedida Estado: Recuperando listagem do diretório de "/Balanço + DRE"... Estado: Listagem do diretório "/Balanço + DRE" bem sucedida Estado: Recuperando listagem do diretório de "/Balanço + DRE/2021"... Estado: Listagem do diretório "/Balanço + DRE/2021" bem sucedida Estado: Recuperando listagem do diretório de "/Balanço + DRE/2021/Estoque"... Estado: Listagem do diretório "/Balanço + DRE/2021/Estoque" bem sucedida Estado: A resolver o endereço de ftp.tecshopping.com.br Estado: Conectando 162.214.155.152:21... Estado: Conexão estabelecida, esperando mensagem de boas-vindas... Estado: A iniciar o TLS... Estado: Verificando certificado... Estado: Conexão TLS estabelecida. Estado: Identificado Estado: Iniciando a transferência de /Balanço + DRE/2021/Estoque/Relatório de Estoque - Saldo Estoque4 (2021-01).xlsm Comando: CWD /Balanço + DRE/2021/Estoque Resposta: 550 Can't change directory to /Balanço + DRE/2021/Estoque: No such file or directory Comando: SIZE /Balanço + DRE/2021/Estoque/Relatório de Estoque - Saldo Estoque4 (2021-01).xlsm Resposta: 550 Can't check for file existence Comando: TYPE I Resposta: 200 TYPE is now 8-bit binary Comando: PASV Resposta: 227 Entering Passive Mode (162,214,155,152,202,113) Comando: RETR /Balanço + DRE/2021/Estoque/Relatório de Estoque - Saldo Estoque4 (2021-01).xlsm Resposta: 550 Can't open /Balanço + DRE/2021/Estoque/Relatório de Estoque - Saldo Estoque4 (2021-01).xlsm: No such file or directory Erro: Erro crítico na transferência de arquivo

The last time I opened Filezilla on my MacBook (macOS BigSur 11.5.2), I did it with a screen configuration that I no longer have; now, the result is that the position (top, left) is out of screen, and doesn't let me see the entire window, also hides the commands that would allow me to reset it. Blocker bug!!

While you fix this bug, how do I to reset screen? (restart was not enough)

When I log in to FileZilla like I have before, it shows that it is attempting to connect, then shows the following Response: fzSftp started protocol_version=11 Command: open "0060100@…"22 Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server Status: Waiting to retry...

And then it starts all over again. I contacted our I.T. department who checked to see if it was a problem on our end, but it's still not working.

When user refresh Directory or change files name in Working Directory (Local site), It redirect to root Directory. So users always need to select working directory from Local site history Dropdown.

Version, OS and other details below

FileZilla Client

Version: 3.55.1

Build information:

Compiled for: x86_64-apple-darwin20.6.0 Compiled on: x86_64-apple-darwin20.6.0 Build date: 2021-08-09 Compiled with: Apple clang version 12.0.5 (clang-1205.0.22.11) Compiler flags: -O2 -g -Wall -Wextra -pedantic -O2 -g -Wall -Wextra -pedantic -mmacosx-version-min=10.13.0 -Werror=partial-availability

Linked against:

wxWidgets: 3.0.6 SQLite: 3.31.1 GnuTLS: 3.6.15

Operating system:

Name: Mac OS X (Darwin 17.7.0 x86_64) Version: 10.13 CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx aes pclmulqdq lm Settings dir: /Users/din/.filezilla/

On logging into the shared Onedrive through Filezilla Pro, Filezilla does allow the login, but crashes back to the desktop on attempting to access the shared folders. Crash report from Event viewer-: Faulting application name: filezilla.exe, version: 3.55.1.0, time stamp: 0x00000000 Faulting module name: ntdll.dll, version: 10.0.19041.1202, time stamp: 0x4f115fac Exception code: 0xc0000374 Fault offset: 0x00000000000ff199 Faulting process id: 0x3414 Faulting application start time: 0x01d7af415b3c5908 Faulting application path: C:\Program Files\FileZilla Pro\filezilla.exe Faulting module path: C:\WINDOWS\SYSTEM32\ntdll.dll Report Id: 704ec29f-91eb-40a7-ba70-2fe48e44641f Faulting package full name: Faulting package-relative application ID:

When I select "log to file" then I see that the file is empty. Sometimes when I stop the server then suddenly the file is filled with all the log information. But not always.

So this feature does not work as expected.

Have just upgraded from 0.9.6 to version 1.0.1 and have found that systems can no longer authenticate. Traced the issue to the fact that usernames in the new version are case sensitive but not in 0.9.6

Please correct to remove the need for case match on usernames

When I copy a modified file to a server, a pop-up windows opens which tells the file is already there on the server with a choice of overwrite options. Hovever, the checkboxes for always performing said action don't work at all: the next time the pop-up window reopens with uncĥecked always perform option.

many years ago i had the website dropbord.nl. i deleted this site years ago but i want to put the site back online. can you help me with this. we have a backup

Filezilla client version 3.56.0 64 bit for windows 10 I attempted to download a directory structure into a samba share on a linux machine running Ubuntu 20:04. I got many failures - can't open a file for writing. Investigation showed that the file's immediate parent directory did not exist. In think what is happening is that the directory create is not written to the disk immediately and the following transfer of files in that directory therefore fails. A bit of the log follows.

Command: cd "/var/www/georgemetcalfe.com/htdocs/wp-content/themes/twentyfifteen/js" Response: New directory is: "/var/www/georgemetcalfe.com/htdocs/wp-content/themes/twentyfifteen/js" Command: get "color-scheme-control.js" "K:\websites\georgemetcalfe.com\htdocs\wp-content\themes\twentyfifteen\js\color-scheme-control.js" Error: Could not open 'K:\websites\georgemetcalfe.com\htdocs\wp-content\themes\twentyfifteen\js\color-scheme-control.js' for writing. Error: local: unable to open K:\websites\georgemetcalfe.com\htdocs\wp-content\themes\twentyfifteen\js\color-scheme-control.js Error: Critical file transfer error Status: Starting download of /var/www/georgemetcalfe.com/htdocs/wp-content/themes/twentyfifteen/js/html5.js Command: get "html5.js" "K:\websites\georgemetcalfe.com\htdocs\wp-content\themes\twentyfifteen\js\html5.js" Error: Could not open 'K:\websites\georgemetcalfe.com\htdocs\wp-content\themes\twentyfifteen\js\html5.js' for writing. Error: local: unable to open K:\websites\georgemetcalfe.com\htdocs\wp-content\themes\twentyfifteen\js\html5.js Error: Critical file transfer error Status: Starting download of /var/www/georgemetcalfe.com/htdocs/wp-content/themes/twentyfifteen/js/skip-link-focus-fix.js Command: get "skip-link-focus-fix.js" "K:\websites\georgemetcalfe.com\htdocs\wp-content\themes\twentyfifteen\js\skip-link-focus-fix.js" Error: Could not open 'K:\websites\georgemetcalfe.com\htdocs\wp-content\themes\twentyfifteen\js\skip-link-focus-fix.js' for writing. Error: local: unable to open K:\websites\georgemetcalfe.com\htdocs\wp-content\themes\twentyfifteen\js\skip-link-focus-fix.js Error: Critical file transfer error Status: Starting download of /var/www/georgemetcalfe.com/htdocs/wp-content/themes/twentyfifteen/js/functions.js Command: get "functions.js" "K:\websites\georgemetcalfe.com\htdocs\wp-content\themes\twentyfifteen\js\functions.js" Error: Could not open 'K:\websites\georgemetcalfe.com\htdocs\wp-content\themes\twentyfifteen\js\functions.js' for writing. Error: local: unable to open K:\websites\georgemetcalfe.com\htdocs\wp-content\themes\twentyfifteen\js\functions.js Error: Critical file transfer error Status: Starting download of /var/www/georgemetcalfe.com/htdocs/wp-content/themes/twentyfifteen/js/keyboard-image-navigation.js Command: get "keyboard-image-navigation.js" "K:\websites\georgemetcalfe.com\htdocs\wp-content\themes\twentyfifteen\js\keyboard-image-navigation.js" Error: Could not open 'K:\websites\georgemetcalfe.com\htdocs\wp-content\themes\twentyfifteen\js\keyboard-image-navigation.js' for writing. Error: local: unable to open K:\websites\georgemetcalfe.com\htdocs\wp-content\themes\twentyfifteen\js\keyboard-image-navigation.js Error: Critical file transfer error Status: Starting download of /var/www/georgemetcalfe.com/htdocs/wp-content/themes/twentyfifteen/js/customize-preview.js Command: get "customize-preview.js" "K:\websites\georgemetcalfe.com\htdocs\wp-content\themes\twentyfifteen\js\customize-preview.js" Error: Could not open 'K:\websites\georgemetcalfe.com\htdocs\wp-content\themes\twentyfifteen\js\customize-preview.js' for writing. Error: local: unable to open K:\websites\georgemetcalfe.com\htdocs\wp-content\themes\twentyfifteen\js\customize-preview.js Error: Critical file transfer error Status: Starting download of /var/www/georgemetcalfe.com/htdocs/wp-content/themes/twentyfifteen/genericons/Genericons.woff Command: cd "/var/www/georgemetcalfe.com/htdocs/wp-content/themes/twentyfifteen/genericons" Response: New directory is: "/var/www/georgemetcalfe.com/htdocs/wp-content/themes/twentyfifteen/genericons" Command: get "Genericons.woff" "K:\websites\georgemetcalfe.com\htdocs\wp-content\themes\twentyfifteen\genericons\Genericons.woff" Error: Could not open 'K:\websites\georgemetcalfe.com\htdocs\wp-content\themes\twentyfifteen\genericons\Genericons.woff' for writing. Error: local: unable to open K:\websites\georgemetcalfe.com\htdocs\wp-content\themes\twentyfifteen\genericons\Genericons.woff Error: Critical file transfer error

r10380 (user impersonation), breaks compatibility with OpenBSD. OpenBSD does not support shadow(3) and crypt(3) causing building to fail.

As a workaround introduce FZ_OPENBSD, which is similar in behavior as FZ_MAC.

#12554 fixes building of libfilezilla on OpenBSD. It does this by introducing FZ_OPENBSD, mimicking behavior of e.g. FZ_MAC.

Enclosed patch adds support for FZ_OPENBSD to filezilla client.

Hi,

I have created ftp account,

username: Kiran password:e&UB!eHi#5JV!DyfYemr

but not sure why it is not working with this password. I tried with some simple password then it worked, is this happened because FileZilla doesn't support some spl characters?

Please add 64x64 icon.

The is a warning via Debian AppStream checks that we wish to eliminate.

​https://appstream.debian.org/sid/main/issues/filezilla.html

Dragging a folder onto the target server adds thousands of ".." onto the queue. This never resolves and the program must be closed. I have downgraded to 3.55.1 which is working fine.

Same problems occur on my colleague's machine (also Windows 10, but completely different hardware).

After updating to version 3.56.1 today, every time I transfer a file, FileZilla shuts down after the transfer is complete.

Since I uploaded the new version - 3.56.1 - uploading files works normally but at the end of the upload, the screen greys out and a window appears saying Filezilla has crashed and Windows will shut it down. This happens every time I upload files.

When i uploading .net core application in windows server with 4000+ files its crash after few file update.

I wish to update my portable version to 3.56.1 but there is no zip on the download section of the web page. Thanks.

FileZilla Client

Version: 3.56.0

Build information:

Compiled for: i686-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2021-10-11 Compiled with: i686-w64-mingw32-gcc (GCC) 10-win32 20210110 Compiler flags: -O2 -g -Wall -Wextra -Wno-deprecated-copy -ffunction-sections -fdata-sections -Wno-cast-function-type

Linked against:

wxWidgets: 3.0.6 SQLite: 3.35.5 GnuTLS: 3.7.2

Operating system:

Name: Windows 10 (build 18363), 64-bit edition Version: 10.0 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi bmi2 adx lm Settings dir: F:\FileZillaPortable\Data\settings\

I have been running FileZilla for many years with any major issues, but when I upgraded from 3.56.1 to 3.56.2 FileZilla Become unusable in my circumstances. I attempted to find and reinstall 3.56.1 so FileZilla would be viable to me again, but after a long search it seems like it no longer exists on the world wide web in binary install format. The directory listing window will not display folders nor files, except one just downloaded in the only the root folder of the selected drive. Can not even navigate drive C. Issue was first noticed on other drive letters, namely, drive B an internal SSD, and drive E an USB 3.0 SSD. Please provide access to 3.56.1 so that I can use FileZilla. Please correct the issue in next release so I can stay on most recent. Please provide a way to disable auto-updates so I can operate quickly until issues is corrected. Thank you.

I have an old NAS (Netgear Stora - 2010) which required flash to run, but I accessed it via the sftp and started to transfer the files, to my QNAP NAS, about 105,000 files I recall. The logs were all working, about 4,500 files did not transfer because of permission restrictions I think. I watched the queue progress OK. I think it finished but then just stopped. I could not close the app. I was able to alt-tab to other software and close that, but I could not use the PC (Windows 10). I had to power cycle the PC. Everything seems OK now. I would like to have seen the log files saved then I would know if it really completed. Also an option to continue if the queue was interrupted. PS: I just noticed a notification message that "All transfers have finished. 45,871 could not be transferred" Many Thanks Barry Marshall

Hello! When I start FileZilla I became the Message that a new version is arrived from FileZilla! When I download and installed the new Filezilla I became all three seconds another Message that the Installation go wrong! Than i install the old Version! Than I become the same Message as before that a new version is arrived! When I installed the new version again! Than i become the Messages that the installation dont work again!

Can you help me?

imagine the consequences of moving your entire home folder to root with the click of a button. I am asking that you please add the option of having a simple prompt "do you want to move dir1 into dir2?" YES/NO. Its kinda insane that a project this big and old has not added this yet despite hundreds of suggestions from users over the last 20 years. Why can't this be added?

When I drag a folder into another folder the prompt asking to confirm its move does not show and filezilla immedietly begins moving files with no user input.

Error on connection to remote host. Changed to early version and it works fine. Below is the Filezilla log file. 2021-11-05 18:53:48 10736 1 Status: Resolving address of ftp.iexchangeweb.com 2021-11-05 18:53:48 10736 1 Status: Connecting to 38.105.33.241:21... 2021-11-05 18:53:48 10736 1 Status: Connection established, waiting for welcome message... 2021-11-05 18:53:48 10736 1 Response: 220 iExchangeWeb FTP Server - Authorized access only 2021-11-05 18:53:48 10736 1 Command: AUTH TLS 2021-11-05 18:53:48 10736 1 Response: 234 AUTH command OK. Initializing SSL connection. 2021-11-05 18:53:48 10736 1 Status: Initializing TLS... 2021-11-05 18:53:48 10736 1 Error: GnuTLS error -8: A packet with illegal or unsupported version was received. 2021-11-05 18:53:48 10736 1 Status: Connection attempt failed with "ECONNABORTED - Connection aborted". 2021-11-05 18:53:48 10736 1 Error: Could not connect to server 2021-11-05 18:53:48 10736 1 Status: Waiting to retry... 2021-11-05 18:53:52 10736 1 Error: Connection attempt interrupted by user Thanks

No filesystem links seem to work any longer. Junction links on windows 7 and windows 10 just result in a "550 Couldn't open the directory"

According to botg ​here this is indeed a bug.

This is an entire feature that is suddenly removed which renders the server software totally useless in my usecase since users can no longer enter their folders. The only current solution would be to totally re-arrange the filesystems, which is ofcourse completely unfeasable.

When downloading text file with UTF 16 LE, Should using binary transfer type. Otherwise the downloaded file will become unreadable. If the transfer type is set on "Auto", FileZilla will use ASCII mode to download the text file. For some green hands. they will consider it the file in the FTP server is bad. Can FileZilla detect the encoding automatically and choose the correct transfer type for downloading the text file ?

Bij het updaten van wijzigingen op onze website www.wkvmusica.nl krijg ik de melding serverfout (500 error).

I transfert a lot of files after several downloads i have this message:

"451 Another command is currently pending, please try again later"

my transfer configuration is FTPs over TLS implicit encryption Passive mode

A strange thing is that at this moment, we see my private ip address in the firewalls

Hello, i have been having issues getting connected to the server in order for me to submit our monthly billing into TMHP. The connection continues to time out. I am currently using version 3.56.2. Has anything changed recently or how may this issue be resolved for me.

Filezile not working on Macbook Air M1 2020 - I cannot open Filezila - error msg: Filezila Quit unexpecedly:

Process: filezilla [32257] Path: /Volumes/VOLUME/*/FileZilla.app/Contents/MacOS/filezilla Identifier: org.filezilla-project.filezilla Version: ??? Code Type: X86-64 (Translated) Parent Process: ??? [1] Responsible: filezilla [32257] User ID: 501

Date/Time: 2021-11-24 10:39:31.826 +0000 OS Version: macOS 11.6 (20G165) Report Version: 12 Anonymous UUID: 5BD02B7C-5F6C-C06F-7C6F-45BE69379115

Sleep/Wake UUID: AB85FA10-DA0F-4843-81E6-AA776C1DFD31

Time Awake Since Boot: 260000 seconds Time Since Wake: 210 seconds

System Integrity Protection: enabled

Notes: Translocated Process

Crashed Thread: 0

Exception Type: EXC_BREAKPOINT (SIGTRAP) Exception Codes: EXC_ARM_BREAKPOINT at 0x00007ffdffcccd38 (brk 1) Exception Note: EXC_CORPSE_NOTIFY

Termination Signal: Trace/BPT trap: 5 Termination Reason: Namespace SIGNAL, Code 0x5 Terminating Process: exc handler [32257]

Application Specific Information: rosetta error: /var/db/oah/223263137464320_223263137464320/8525bb1ba7f50efc9a4f51b635712d1821d4e417a61147fedea7d2f2c7d41a12/filezilla.aot: attachment of code signature supplement failed: 1

Thread 0 Crashed: 0 runtime 0x00007ffdffcccd38 0x7ffdffcb0000 + 118072 1 runtime 0x00007ffdffcccd80 0x7ffdffcb0000 + 118144 2 runtime 0x00007ffdffcbc6e4 0x7ffdffcb0000 + 50916 3 runtime 0x00007ffdffcbddf4 0x7ffdffcb0000 + 56820 4 runtime 0x00007ffdffcbd5ec 0x7ffdffcb0000 + 54764 5 runtime 0x00007ffdffcb4440 0x7ffdffcb0000 + 17472 6 dyld 0x00000002015fd000 0x2015fd000 + 0

Thread 0 crashed with ARM Thread State (64-bit):

x0: 0x0000000000000000 x1: 0x0000000000000003 x2: 0x000000000000003c x3: 0x000000000000002c x4: 0x0000000000000303 x5: 0x0000000000000000 x6: 0x0000000000000000 x7: 0x00000000003eb7d3 x8: 0x00007ffdffcec000 x9: 0x0000000000000000 x10: 0x00007ffdffce208e x11: 0x0000000000000000

x12: 0x00000000ffffffff x13: 0x0000000000000000 x14: 0x0000000000000000 x15: 0x00007ffdffcd3758 x16: 0xffffffffffffffe1 x17: 0x00007ffdffcdc7b6 x18: 0x0000000306687fb3 x19: 0x00007ffdffce1fd0 x20: 0x00000003066879b8 x21: 0x00000001012c8000 x22: 0x0000000000000004 x23: 0x00000001012c8000 x24: 0x0000000000000003 x25: 0x0000000000000001 x26: 0x0000000306687ad0 x27: 0x00000002015fd000 x28: 0x00000003066908a0 fp: 0x00000003066868b0 lr: 0x00007ffdffcccd30

sp: 0x0000000306686890 pc: 0x00007ffdffcccd38 cpsr: 0x60000000

far: 0x00007ffdffce1fd0 esr: 0xf2000001

Binary Images:

0x2015fd000 - 0x201698fff dyld (852.2) <0CC19410-FD43-39AE-A32A-50273F8303A4> /usr/lib/dyld

0x7ffdffcb0000 - 0x7ffdffcdffff runtime (203.58) <BBDCFB04-7B39-3FDE-90D3-A6E55EE628E7> /usr/libexec/rosetta/runtime

External Modification Summary:

Calls made by other processes targeting this process:

task_for_pid: 0 thread_create: 0 thread_set_state: 0

Calls made by this process:

task_for_pid: 0 thread_create: 0 thread_set_state: 0

Calls made by all processes on this machine:

task_for_pid: 0 thread_create: 0 thread_set_state: 0

VM Region Summary: ReadOnly portion of Libraries: Total=1048K resident=0K(0%) swapped_out_or_unallocated=1048K(100%) Writable regions: Total=22.7M written=0K(0%) resident=0K(0%) swapped_out=0K(0%) unallocated=22.7M(100%)

VIRTUAL REGION

REGION TYPE SIZE COUNT (non-coalesced) =========== ======= ======= STACK GUARD 56.0M 1 Stack 8176K 1 VM_ALLOCATE 10.5M 1 VM_ALLOCATE (reserved) 4088K 2 reserved VM address space (unallocated) DATA 288K 4 DATA_CONST 32K 1 LINKEDIT 272K 4 TEXT 816K 2 mapped file 4.7G 8 =========== ======= ======= TOTAL 4.8G 24 TOTAL, minus reserved VM space 4.8G 24

Model: MacBookAir10,1, BootROM 6723.140.2, proc 8:4:4 processors, 8 GB, SMC Graphics: kHW_AppleM1Item, Apple M1, spdisplays_builtin Memory Module: LPDDR4 AirPort: spairport_wireless_card_type_airport_extreme, wl0: Aug 18 2021 22:48:53 version 18.50.40.11.7.8.123 FWID 01-3ed0e3a2 Bluetooth: Version 8.0.5d7, 3 services, 27 devices, 1 incoming serial ports Network Service: Wi-Fi, AirPort, en0 USB Device: USB 3.1 Bus USB Device: USB 3.1 Bus Thunderbolt Bus: MacBook Air, Apple Inc. Thunderbolt Bus: MacBook Air, Apple Inc.

I recently was uploading a set of directories with FileZilla Client via SFTP, with most of the queued directories containing subdirectories. I noticed that the subdirectories are placed in the queue AFTER all of the parent directories. In most cases this is not a concern, but it makes it very tedious to remove or add items to/from the queue while it is not completely finished, and gives a false sense that a directory is "done transferring" halfway through the queue, when in reality its contents may not be transferred until much later. In my case, the destination has very limited disk space and I wanted to move directories out of the destination before the queue completed, and I was unable to do this reliably.

I feel it is more functional to position a queued directory's subdirector(y|ies) immediately after their parent directory in the queue, rather than at the end of all the other parent directories. That would be a much more intuitive queueing order to most users, I believe.

To Reproduce:

Start a transfer queue of multiple directories at once (shift+click to select many, perhaps, then begin the transfer), where at at least one of the directories queued has contents within a subdirectory. Observe the queue "finish" the files that were in the directory, then interrupt the transfer (to simulate a full disk, for example). At first glance, it appears a directory's queue entries were successfully processed, but in reality there is are entire other sets of files still waiting at the end of the queue. A natural urge in a disk full situation would be to move some of the "completed" transfers out of the destination, but in this case, that would be disastrous, as the contents of their subdirectories have not yet transferred.

Proposed solution:

Always append subdirectory contents immediately after their parent directory's contents in the transfer queue.

Thank you so much for the excellent and valuable work you do.

Hello I am using coz Server with sftp on MVS. I try to open an MVS DATAset with VTAM.TEST or with 'VTAM.TEST.' but I don't get an answer. Is filezilla able to work with MVS-Datasets under sftp Protokoll?

Hi,

I have been using Filezilla FTP since long time for file sharing from client site to server site. Till yesterday it worked perfectly alright. But today it is showing up this error.

Error:Connection timed out after 20 seconds of inactivity

Error:Could not connect to server

Please help me out with this. I have tried changing the server time out settings too but nothing worked out.

Hi Team,

we have purchased file zilla through online however invoice not received Below order number FYI Kindly do the needful

Order Number: 169025187

I am running filezilla at Debian Bookworm (testing). On startup I use the option "Restart tabs and reconnect". Filezilla then shows the files of the local and remote (sub)directories, that were active at the previous exit of filezilla. This is a nice feature because often more than once files from the same subdirectory are changed.

Unfortunately at the reconnect the option "synchronized browsing" is not activated, although this option is set for the site. This option only seems to be automatically activated, if the site is manually connected using the site-manager at the default local and remote root-directory, but you almost never want to be at this directory.

This problem exists at filezilla-3.52.2, filezilla-3.53.1 and filezilla-3.57.0.

The "synchronized browsing"-option is a very important option, because it avoids, that files are transported to the wrong directory.

If you forget to set the option and change directory without noticing this, the website will not work anymore.

So it is not only annoying to set the option each time at a reconnect, it also causes an unneeded risk of a not working website.

A weak property of this solution is that at a reconnect "synchronized browsing" also is set if the local and remote path are not in sync, because at the previous session "synchronized browsing" was disabled by the user. But this is general behavior of filezilla, which never checks, that the directories really are in sync, when the user sets the option.

I send a simple, validated patch for filezilla-3.57.0 (8 lines) which always sets the option at a "Restart tabs and reconnect" or by reconnect-button, if this option is specified for the site.

The patch-logic is also validated at filezilla-3.52.2, which was the current filezilla-release at Debian Bullseye.

I think this patch causes a more logical and user-friendly implementation of the "synchronized browsing" option for the site, avoiding unnecessary mistakes with downloads.

KDE - Minimize to systemtray crashes if used.

See: ​https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=726348

Video of issue attached.

I have an app on all my Android devices: "FX File Explorer". Basically, it allows me to browse a remote device via an SFTP connection *or* my local files in a viewing pane similar to a Windows File Explorer window.

The biggest advantage is that I can stream any media file just by tapping on it. The explorer invokes the local device's media player, and streams the file, versus downloading and opening it.

My request is to add this functionality to FileZilla, where double clicking on a media file would invoke your local media player, and stream the media to your machine, with downloading switched to a right-click function.

It would be really nice if, on reopening a connexion, Filezilla would remember that I had toggled Synchronized Browing and go directly to the last local and distant folders opened.

I am having trouble connecting to the FileZilla. Every time I am trying to connect, it says "Could not Connect to Server". I have restarted the computer and I think I have the latest version too.

Add a function that would enable speed limits on a schedule.

Example: From 8am to 5pm upload speed limit enabled. That way a long backup wouldn't interrupt other users as much during the workday, but would allow full speed at night.

Hi, I am experimenting an issue when connecting to the FTP server owned by a vendor of my company. The server is a Microsoft FTP and I am connecting from a MacBook Pro M1 through a VPN.

My connection is configured as:

• Require explicit FTP over TLS
• Logon by password (normal)
• Server type autodetect
• Transfer passive
• Transfer type binary (I have experimented with ASCII too)

but I receive the error 550 Data channel timed out on LIST operation. Here are the full logs at debug level:

Status:      	Connecting to <IP>:21...
Status:      	Connection established, waiting for welcome message...
Status:      	Initializing TLS...
Status:      	TLS connection established.
Status:      	Logged in
Status:      	Retrieving directory listing...
Command:	PWD
Response: 	257 "/" is current directory.
Command:	TYPE I
Response: 	200 Type set to I.
Command:	PASV
Response: 	227 Entering Passive Mode (<IP1>,<IP2>,<IP3>,<IP4>,19,138).
Command:	LIST
Response: 	150 Opening BINARY mode data connection.
Response: 	550 Data channel timed out.
Error:        	Failed to retrieve directory listing

On the same machine this simple python script succeeds in the operation:

from ftplib import FTP_TLS
ftp = FTP_TLS("ThirdPartyServer", "MyLogin", "MyPassword")
ftp.set_debuglevel(2)
ftp.set_pasv(True)
ftp.prot_p()
ftp.pwd()
ftp.dir()

producing the following stack:

Python 3.9.7 (default, Nov 19 2021, 08:43:07)
[Clang 13.0.0 (clang-1300.0.29.3)] on darwin
Type "help", "copyright", "credits" or "license" for more information.
>>> from ftplib import FTP_TLS
>>> ftp = FTP_TLS("ThirdPartyServer", "MyUser", "MyPassword")
>>> ftp.set_debuglevel(2)
>>> ftp.set_pasv(True)
>>> ftp.prot_p()
*cmd* 'PBSZ 0'
*put* 'PBSZ 0\r\n'
*get* '200 PBSZ command successful.\n'
*resp* '200 PBSZ command successful.'
*cmd* 'PROT P'
*put* 'PROT P\r\n'
*get* '200 PROT command successful.\n'
*resp* '200 PROT command successful.'
'200 PROT command successful.'
>>> ftp.pwd()
*cmd* 'PWD'
*put* 'PWD\r\n'
*get* '257 "/" is current directory.\n'
*resp* '257 "/" is current directory.'
'/'
>>> ftp.dir()
*cmd* 'TYPE A'
*put* 'TYPE A\r\n'
*get* '200 Type set to A.\n'
*resp* '200 Type set to A.'
*cmd* 'PASV'
*put* 'PASV\r\n'
*get* '227 Entering Passive Mode (<IP1>,<IP2>,<IP3>,<IP4>,19,141).\n'
*resp* '227 Entering Passive Mode (<IP1>,<IP2>,<IP3>,<IP4>,19,141).'
*cmd* 'LIST'
*put* 'LIST\r\n'
*get* '150 Opening ASCII mode data connection.\n'
*resp* '150 Opening ASCII mode data connection.'
06-11-21  10:06AM       <DIR>          folder1
05-24-21  01:25PM       <DIR>          folder2
10-06-21  10:34AM       <DIR>          folder3
03-30-21  08:43AM       <DIR>          folder4
*get* '226 Transfer complete.\n'
*resp* '226 Transfer complete.'
>>>

Am I missing some configuration in Filezilla?

Using SFTP to a Rocky Linux 8 OS, manually setting the numeric value of a directory to 2755 does not set the sticky group bit:

2755: drwxr-xr-x.

2775: drwxrwxr-x.

2777: drwxrwxrwx.

6755 does set the SUID bit: drwsr-xr-x.

chmod 2755 over SSH also sets the sticky bit.

Everything is perfect on PC. Moving to a MacBook with an M1 processor. Exported settings etc. on PC and then imported those settings on the MacBook. FTP connects as it should but the uploads "stutter". A few files will upload and then the upload stops and the server disconnects because of no data transfer. FZ reconnects and the process repeats. Uploads that used to take 15-20 seconds now take 5 or more minutes. Apple care found no issues on the MacBook. The router setup has not changed from the PC. The Debug report is attached.

Server upload permission used to be read [Y/N] and write [Y/N]. On my server you can login anonymously and download files from the virtual "/" which is physically "c:/downloads". this directory is Read:Y write:N. I have another virtual directory "/upload" which physically links to "c:/uploads" but it has the following permission "read:n write:Y". You cannot view this directory nor can you download but you can upload files.

It is important that the upload and download capabilities lie in separate directories so that random people cannot use my server as a file storage location.

in filezilla server 1.2 the directory permissions are R or R+W. W-only no longer exists.

Please add Write-only as an additional option in the next version.

Error: GnuTLS error -15 in gnutls_record_recv: An unexpected TLS packet was received. Error: Could not read from socket: ECONNABORTED - Connection aborted Error: Disconnected from server

It's easier than what I thought it should be, only need to add the following below to the FileZilla interface manifest xml. Patch added.

  <application xmlns="urn:schemas-microsoft-com:asm.v3">
    <windowsSettings>
      <longPathAware xmlns="http://schemas.microsoft.com/SMI/2016/WindowsSettings">true</longPathAware>
	  <activeCodePage xmlns="http://schemas.microsoft.com/SMI/2019/WindowsSettings">UTF-8</activeCodePage>
    </windowsSettings>
  </application>

Hi, I think it would be really great if Filezilla gave the possibilty to use a freedesktop.org secret service[*] compliant password manager (like keepassxc, gnome keyring, kde wallet) for storing and retrieving account's passwords.

[*] ​https://freedesktop.org/wiki/Specifications/secret-storage-spec/

With regards

The new impersonation code does not build on (Net)BSD. crypt.h and shadow.h are Linux-specific. I'll attach a patch to show what is needed to make this compile on NetBSD, but of course proper support would be preferred.

Hello!

Long time user, first time bookmarker. I'm not quite sure what I expected, but as I was tidying up my Site Manager I noticed the button and decided to give it a go.

While it is somewhat more convenient than navigating the file structure, I find that having it in its own menu is sub-optimal. What if the bookmarks presented in the dropdown from the Site Manager button as a second level menu.

So, hover on a connection with bookmarks and a menu pops out to the right with the list of bookmarks so you can get there without the extra step.

Still keep the bookmarks menu for navigating while connected and for those that are accustomed to it, but for my use, I generally connect for a quick task and then close FZ until I need to do something else.

Ok, i have on my server "linked files" and it was fine until now. Now filezilla shows those files as folders and it is a living mess. I don't see my real folders. It is all yellow.

we are running filezilla server 1.30 ( previously 1.20 which also had the same issue)

the ftp server part runs fine but the admin interface does not work ( log throws a tls error )

we have a production server and a testing server. on the testing server it runs fine

the test server has more strict setup of enabled tls version and cipher suites ( see attachment)

i suspect it might be somewhere in the code where it chooses the encryption method for the local connection with the admin interface.

NO HE RECIBIDO EMAIL DE AUTORIZACION AL CONFIGURAR LA CUENTA DE ONE DRIVE, EXISTE OTRO MODO DE RECIBIR EL CÓDIGO DE AUTORIZACIÓN? EN LUGAR DE RECIBIRLO EN EL EMAIL DE MICROSOFT, ENVIARLO A LA CUENTA DE GMAIL? LA CUENTA DE MICROSOFT ES EDUCACIONAL Y PARECE QUE HAY CIERTOS PERMISOS QUE NO TENGO ACTIVADOS. HE COMPRADO LA VERSIÓN PRO PARA PODER GESTIONAR ESTA CUENTA DE ONE DRIVE, PERO NO PUEDO GESTIONARLA.

I frequently use the search function to find a specific file and download to the local folder I am working in, then 5 minutes later, search for another unrelated file and download to the same folder. There is no function to just...DOWNLOAD straight from the search window like there is if I were just perusing the remote directory. It prompts a "Download to:" dialogue every time. But within a single day that I am working, 99% of the time, this is the same folder, and I have the same requirements of the path structure and queueing. I just want it downloaded *now* with a flat structure. But it never remembers my settings, and as near as I can find, there is no option to make it remember.

If I knew already which remote folder the file I need was in, I could just sort through the list there, hit Return, and it would download, but it could be in one of several folders, and I rarely know which I'll find it in. Just an option to remember preferences would be an incredible help. Thanks.

Recieving following error.

Request Id: 63ab93dd-4bc2-4b96-a4ab-a92fd25ef000 Correlation Id: a1791b7e-d357-4e3d-bfb1-abf9037591d2 Timestamp: 2022-03-10T02:10:53Z Message: AADSTS90014: The required field 'request' is missing from the credential. Ensure that you have all the necessary parameters for the login request.

Hi,

It seems that the file's name length is limited to tight. I have long file names support enabled in Windows (HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\FileSystem\LongPathsEnabled=1)

I try to transfer game's saves from my PC to my Wii-U and very long files'names are concerned (using more than 128 characters).

FilleZilla client failed to open the file and so don't even send the STOR command.

I transferred the same files successfully using Cyberduck.

Bonjour, ça fait 3 jours que je n'arrive pas a me connecté a FileZilla.

Statut : Résolution de l’adresse de sb12900.sdedi.com Statut : Connexion à 51.75.243.135:21… Statut : Connexion établie, attente du message d’accueil… Statut : Initialisation de TLS… Erreur : Erreur GnuTLS -8: A packet with illegal or unsupported version was received. Statut : Échec de la tentative de connexion avec « ECONNABORTED - Connexion annulée ». Erreur : Impossible d’établir une connexion au serveur Statut : Attente avant nouvel essai… Statut : Résolution de l’adresse de sb12900.sdedi.com Statut : Connexion à 51.75.243.135:21… Statut : Connexion établie, attente du message d’accueil… Réponse : 220-Sdedi.com You're Welcome! Réponse : 220 ProFTPD 1.3.5b Server (File Transfert Protocol Sdedi.com) [51.75.243.135] Commande : AUTH TLS Réponse : 234 AUTH TLS successful Statut : Initialisation de TLS… Erreur : Erreur GnuTLS -8: A packet with illegal or unsupported version was received. Statut : Échec de la tentative de connexion avec « ECONNABORTED - Connexion annulée ». Erreur : Impossible d’établir une connexion au serveur

hi there, i have been using key authentication without passphrase for a long time with FileZilla. This works like a dream, however, there will come a time where you need to protect your ssh keys with passphrases.

A helpful feature addition would be to add the ability to enter your passphrase before you get access to your filesystem.

in Prior versions (0.x) we had the ability to permit write, but not delete as well as write, but not list. In reading the forums, you has suggested that blocking delete was bad and you were not going to be brining that back (those were not the exact words).

The use case that I have is a single anonymous dropbox where people can easily just drop a file. Often this is a one time ad-hoc event, so creating a dedicated user account, while possible. is not always quick/simple.

Having "anyone" (anonymous) be able to delete a file that anyone else uploaded is not idea. If brining back the ability to prevent anonymous from deleting, can you consider the ability to remove list perms from anonymous account ? This would permit users/client to drop a file, but they can not see other files that were also dropped.

Thanks!

my system mac os 10.14 FileZilla pro client3.58.1 used to be available, but it can't continue to be used after today's update，if additional information is required, my email lyf1994s@…, please help me

When trying to replace a file using Microsoft Azure File Storage Service protocol. Replacing file creates a new fz_incomplete file and doesn't replace current file.

I have a website that uses a certificate from Let's Encrypt. FileZilla reports a chain of four certificates:

0 (Server certificate) 1 (Intermediate certificate) 2 (Intermediate certificate) 3 (Root certificate)

Certificate 0 is from Let's Encrypt Certificate 1 is from ISRG Root X1 Certificate 2 is from DST Root CA X3 Certificate 3 says the issuer is self-signed (DST Root CA X3) and that it expired 9/30/2021. Certificate 1 should be trusted. The DST Root CA X3 was a temporary work-around that Let's Encrypt used to get their certificates working. The expiration of their DST Root CA X1 certificate was always planned and the ISRG Root X1 certificate should be trusted.

The situation is fully explained at ​https://letsencrypt.org/docs/dst-root-ca-x3-expiration-september-2021/

I don't have any idea of how FileZilla does its certificate checks, but by complaining about the expired certificate (and not allowing a user override), some sites are inaccessible through FileZilla.

If FileZilla uses OpenSSL, the notes from Let's Encrypt say it must use version 1.1.0 or later.

In my deployment environment I want to install FileZilla silently in a given directory. According to the ​FileZilla-Wiki the correct command line should be for example:

FileZilla_3.59.0_win64-setup.exe /S /user=all /D=C:\Program Files\FileZilla

However, the installation always lasts in the directory C:\Program Files (x86)\FileZilla FTP Client. I tried to use the /D argument without and with quotes. It does not make a difference. The destination directory is ignored by the 32-bit and 64-bit versions. So far, I had also omitted /user=all.

By the way: It is also unfortunate that the installer for the 64-bit version writes the uninstall information in the 32-bit branch of the registry.

Hello, I'm using the latest version of FileZilla. I just noticed that it's not longer possible to upload CSS-files. Is this a bug ? Kindest regards, Luc

Problem details copied from Mac OS automatic reporting system:

Translated Report (Full Report Below)

Incident Identifier: 2F23778D-FD8F-40DB-9E6D-E13C0FDD3908 CrashReporter Key: 80EAB0EE-55AC-45FA-0039-1D0AE3B17B74 Hardware Model: MacBookPro18,2 Process: filezilla [81376] Path: /Applications/FileZilla Pro.app/Contents/MacOS/filezilla Identifier: org.filezilla-project.filezilla.sandbox Version: 3.59.0 (3.59.0) Code Type: X86-64 (Native) Role: Default Parent Process: launchd [1] Coalition: org.filezilla-project.filezilla.sandbox [75056]

Date/Time: 2022-04-15 14:31:52.7444 +0200 Launch Time: 2022-04-15 14:31:52.7292 +0200 OS Version: macOS 12.3.1 (21E258) Release Type: User Report Version: 104

Exception Type: EXC_BREAKPOINT (SIGTRAP) Exception Codes: 0x0000000000000001, 0x00007ff7ffe6d9c8 Exception Note: EXC_CORPSE_NOTIFY Termination Reason: SIGNAL 5 Trace/BPT trap: 5 Terminating Process: exc handler [81376]

Triggered by Thread: 0

Application Specific Information: rosetta error: /var/db/oah/279293133324288_279293133324288/941d88b9390edd2d635eea926ba3108843df4ea63af2c9e58467a75b3ba12c4f/filezilla.aot: attachment of code signature supplement failed: 1

Thread 0 Crashed: 0 runtime 0x7ff7ffe6d9c8 0x7ff7ffe50000 + 121288 1 runtime 0x7ff7ffe6da10 0x7ff7ffe50000 + 121360 2 runtime 0x7ff7ffe6426c 0x7ff7ffe50000 + 82540 3 runtime 0x7ff7ffe6534c 0x7ff7ffe50000 + 86860 4 runtime 0x7ff7ffe64ac4 0x7ff7ffe50000 + 84676 5 runtime 0x7ff7ffe53b40 0x7ff7ffe50000 + 15168 6 ??? 0x3 ???

Thread 0 crashed with ARM Thread State (64-bit):

x0: 0x0000000000000000 x1: 0x0000000000000003 x2: 0x000000000000003c x3: 0x000000000000002c x4: 0x0000000000000303 x5: 0x0000000000000000 x6: 0x0000000000000000 x7: 0x0000000000458ae0 x8: 0x00007ff7ffe8b000 x9: 0x0000000000000000 x10: 0x0000000000000000 x11: 0x00007ff7ffe8b938

x12: 0x0000000000000000 x13: 0x0000000000000000 x14: 0x000001b900000100 x15: 0x00007ff7ffe73828 x16: 0xffffffffffffffe1 x17: 0x00007ff7ffe7c6ee x18: 0x000000030d51e06b x19: 0x00007ff7ffe812e1 x20: 0x000000030d51e720 x21: 0x0000000104b7e000 x22: 0x0000000000000004 x23: 0x0000000104b7e000 x24: 0x0000000000000003 x25: 0x0000000000000001 x26: 0x000000030d51db80 x27: 0x0000000204da11c0 x28: 0x000000030d526950 fp: 0x000000030d51c980 lr: 0x00007ff7ffe6d9c0

sp: 0x000000030d51c960 pc: 0x00007ff7ffe6d9c8 cpsr: 0x60001000

far: 0x000000030d51c998 esr: 0xf2000001 (Breakpoint) brk 1

Binary Images:

0x7ff7ffe50000 - 0x7ff7ffe7ffff runtime (*) <24497be3-a1b4-360a-b90e-cde9ce78a93b> /usr/libexec/rosetta/runtime

0x0 - 0xffffffffffffffff ??? (*) <00000000-0000-0000-0000-000000000000> ???

Error Formulating Crash Report: dyld_process_snapshot_get_shared_cache failed

EOF

Full Report

{"app_name":"filezilla","timestamp":"2022-04-15 14:31:52.00 +0200","app_version":"3.59.0","slice_uuid":"14f6c892-9b0e-342b-92d3-12dcb2e758af","adam_id":"1298486723","build_version":"3.59.0","platform":0,"bundleID":"org.filezilla-project.filezilla.sandbox","share_with_app_devs":1,"is_first_party":0,"bug_type":"309","os_version":"macOS 12.3.1 (21E258)","incident_id":"2F23778D-FD8F-40DB-9E6D-E13C0FDD3908","name":"filezilla"} {

"uptime" : 750000, "procLaunch" : "2022-04-15 14:31:52.7292 +0200", "procRole" : "Default", "version" : 2, "userID" : 501, "deployVersion" : 210, "modelCode" : "MacBookPro18,2", "procStartAbsTime" : 18219607574055, "coalitionID" : 75056, "osVersion" : {

"train" : "macOS 12.3.1", "build" : "21E258", "releaseType" : "User"

}, "captureTime" : "2022-04-15 14:31:52.7444 +0200", "incident" : "2F23778D-FD8F-40DB-9E6D-E13C0FDD3908", "bug_type" : "309", "pid" : 81376, "procExitAbsTime" : 18219607832076, "translated" : true, "cpuType" : "X86-64", "procName" : "filezilla", "procPath" : "\/Applications\/FileZilla Pro.app\/Contents\/MacOS\/filezilla", "bundleInfo" : {"CFBundleShortVersionString":"3.59.0","CFBundleVersion":"3.59.0","CFBundleIdentifier":"org.filezilla-project.filezilla.sandbox"}, "storeInfo" : {"storeCohortMetadata":"10|date=1650024000000&sf=143443&rdom=filezilla-project.org&rapp=com.apple.Safari&pgtp=Software&pgid=1298486723&ctxt=Discover&lngid=2","itemID":"1298486723","deviceIdentifierForVendor":"FB46F929-2220-5E16-8AF8-3263D4EBA252","thirdParty":true,"softwareVersionExternalIdentifier":"848268890"}, "parentProc" : "launchd", "parentPid" : 1, "coalitionName" : "org.filezilla-project.filezilla.sandbox", "crashReporterKey" : "80EAB0EE-55AC-45FA-0039-1D0AE3B17B74", "wakeTime" : 916, "sleepWakeUUID" : "80201597-3852-4A8C-B622-F7BB34ED62C7", "sip" : "enabled", "isCorpse" : 1, "exception" : {"codes":"0x0000000000000001, 0x00007ff7ffe6d9c8","rawCodes":[1,140703126968776],"type":"EXC_BREAKPOINT","signal":"SIGTRAP"}, "termination" : {"flags":0,"code":5,"namespace":"SIGNAL","indicator":"Trace\/BPT trap: 5","byProc":"exc handler","byPid":81376}, "asi" : {"runtime":rosetta error: \/var\/db\/oah\/279293133324288_279293133324288\/941d88b9390edd2d635eea926ba3108843df4ea63af2c9e58467a75b3ba12c4f\/filezilla.aot: attachment of code signature supplement failed: 1}, "extMods" : {"caller":{"thread_create":0,"thread_set_state":0,"task_for_pid":0},"system":{"thread_create":0,"thread_set_state":0,"task_for_pid":5553880},"targeted":{"thread_create":0,"thread_set_state":0,"task_for_pid":0},"warnings":0}, "faultingThread" : 0, "threads" : [{"triggered":true,"id":5986084,"threadState":{"x":[{"value":0},{"value":3},{"value":60},{"value":44},{"value":771},{"value":0},{"value":0},{"value":4557536},{"value":140703127089152},{"value":0},{"value":0},{"value":140703127091512,"symbolLocation":208,"symbol":"crashreporter_info"},{"value":0},{"value":0},{"value":1894080577792},{"value":140703126992936},{"value":18446744073709551585},{"value":140703127029486},{"value":13108371563},{"value":140703127048929},{"value":13108373280},{"value":4374126592},{"value":4},{"value":4374126592},{"value":3},{"value":1},{"value":13108370304},{"value":8671334848,"symbolLocation":0,"symbol":"dyld_all_image_infos"},{"value":13108406608}],"flavor":"ARM_THREAD_STATE64","lr":{"value":140703126968768},"cpsr":{"value":1610616832},"fp":{"value":13108365696},"sp":{"value":13108365664},"esr":{"value":4060086273,"description":"(Breakpoint) brk 1"},"pc":{"value":140703126968776,"matchesCrashFrame":1},"far":{"value":13108365720}},"frames":[{"imageOffset":121288,"imageIndex":0},{"imageOffset":121360,"imageIndex":0},{"imageOffset":82540,"imageIndex":0},{"imageOffset":86860,"imageIndex":0},{"imageOffset":84676,"imageIndex":0},{"imageOffset":15168,"imageIndex":0},{"imageOffset":3,"imageIndex":1}]}], "usedImages" : [ {

"source" : "P", "arch" : "arm64", "base" : 140703126847488, "size" : 196608, "uuid" : "24497be3-a1b4-360a-b90e-cde9ce78a93b", "path" : "\/usr\/libexec\/rosetta\/runtime", "name" : "runtime"

}, {

"size" : 0, "source" : "A", "base" : 0, "uuid" : "00000000-0000-0000-0000-000000000000"

}

],

"vmSummary" : "ReadOnly portion of Libraries: Total=840K resident=0K(0%) swapped_out_or_unallocated=840K(100%)\nWritable regions: Total=26.4M written=0K(0%) resident=0K(0%) swapped_out=0K(0%) unallocated=26.4M(100%)\n\n VIRTUAL REGION \nREGION TYPE SIZE COUNT (non-coalesced) \n=========== ======= ======= \nSTACK GUARD 56.0M 1 \nStack 8176K 1 \nVM_ALLOCATE 13.3M 4 \nVM_ALLOCATE (reserved) 5192K 3 reserved VM address space (unallocated)\nDATA 80K 3 \nDATA_CONST 80K 1 \nLINKEDIT 240K 4 \nTEXT 624K 2 \nmapped file 6.1G 27 \n=========== ======= ======= \nTOTAL 6.1G 46 \nTOTAL, minus reserved VM space 6.1G 46 \n", "legacyInfo" : { "threadTriggered" : {

}

},

"trialInfo" : { "rollouts" : [

{

"rolloutId" : "61301e3a61217b3110231469", "factorPackIds" : {

"SIRI_FIND_MY_CONFIGURATION_FILES" : "6216ae152a40e71046e16225"

}, "deploymentId" : 240000016

}, {

"rolloutId" : "6112dda2fc54bc3389840642", "factorPackIds" : {

"SIRI_DICTATION_ASSETS" : "624b730e273d707ffc05b1f5"

}, "deploymentId" : 240000104

}

], "experiments" : [

]

},

"reportNotes" : [ "dyld_process_snapshot_get_shared_cache failed"

] }

Model: MacBookPro18,2, BootROM 7459.101.3, proc 10:8:2 processors, 64 GB, SMC Graphics: Apple M1 Max, Apple M1 Max, Built-In Display: Color LCD, 3456 x 2234 Retina, Main, MirrorOff, Online Memory Module: LPDDR5 AirPort: Wi-Fi, wl0: Feb 8 2022 01:51:44 version 20.90.39.0.8.7.114 FWID 01-510a2aee Bluetooth: Version (null), 0 services, 0 devices, 0 incoming serial ports Network Service: Wi-Fi, AirPort, en0 USB Device: USB31Bus USB Device: USB31Bus USB Device: USB31Bus Thunderbolt Bus: MacBook Pro, Apple Inc. Thunderbolt Bus: MacBook Pro, Apple Inc. Thunderbolt Bus: MacBook Pro, Apple Inc.

downstream report can be found here: ​https://bugs.gentoo.org/837740

libtool: link: riscv64-unknown-linux-gnu-g++ -std=c++17 -O2 -pipe -mabi=lp64d -Wall -g -Wl,-O1 -Wl,--as-needed -o timer_fizzbuzz timer_fizzbuzz-timer_fizzbuzz.o ../lib/.libs/libfilezilla.so -lpthread -Wl,-rpath -Wl,/var/tmp/portage/dev-libs/libfilezilla-0.36.0/work/libfilezilla-0.36.0/lib/.libs /usr/lib/gcc/riscv64-unknown-linux-gnu/11.2.1/../../../../riscv64-unknown-linux-gnu/bin/ld: ../lib/.libs/libfilezilla.so: undefined reference to `atomic_exchange_1' collect2: error: ld returned 1 exit status make[1]: * [Makefile:496: process] Error 1 make[1]: * Waiting for unfinished jobs.... /usr/lib/gcc/riscv64-unknown-linux-gnu/11.2.1/../../../../riscv64-unknown-linux-gnu/bin/ld: ../lib/.libs/libfilezilla.so: undefined reference to `atomic_exchange_1' /usr/lib/gcc/riscv64-unknown-linux-gnu/11.2.1/../../../../riscv64-unknown-linux-gnu/bin/ld: ../lib/.libs/libfilezilla.so: undefined reference to `atomic_exchange_1' collect2: error: ld returned 1 exit status collect2: error: ld returned 1 exit statu

Hi. I am attempting to use Filezilla to transfer immensely large numbers of infinitesimally small files over a long range wifi network with incredibly high latency. I am aware of the developer stance of "If you feel you need more than 10 connections, there's something wrong with your internet connection.". Yes, my internet connection is utterly fu%%ed. That's the nature of long range agricultural IoT systems that at least one developer at Filezilla cannot seem to comprehend the potential existence of.

In case you don't believe me, here is a video that shows the bottleneck. Many connections are in a pending state, or a low speed state, because it takes time to initiate the connection and to start transmitting at maximum speed. Connecting multiple filezilla clients to the server so that there are 20 connections increases the transfer speed almost a full 100%.

​https://www.youtube.com/watch?v=x1HwNOOOk-Q

Now, please, for the love of god, can you allow the max simultaneous file transfers parameter to be set to any user defined number rather than the hard cap of 10 so that my speeds are not arbitrarily limited by the ego of some Filezilla developer I will not name? Or at least limit to 32 to take advantage of my NVME (that's a new fancy storage device: imagine 32 hard drives in raid 0. Yeah i know, wild what these young whippersnappers are putting together these days, huh?) Thank you immensely.

If not, I will be forced to upgrade my company to another FTP software that does not place such ridiculous and arbitrary limitations on an otherwise almost unlimited application, solely because of the developers ego.

Thank you for your generous consideration.

Previous ticket on the issue for reference:

​https://trac.filezilla-project.org/ticket/5062#:~:text=This%20limit%20is%20intentional.,wrong%20with%20your%20internet%20connection.

I updated FZ yesterday from 3.57.0 to 3.59.0 on Windows 10 and when I try connect to two different Ubuntu servers (sftp ssh protocol) I receive the same error message: Statut : Connexion à (IP):(port)… Réponse : fzSftp started, protocol_version=11 Commande : open "username@IP" port Erreur : Connection interrompue après 20 secondes d’inactivité Erreur : Impossible d’établir une connexion au serveur note that I have a second pc, with FZ still on 3.57.0, which work perfectly

Same as they described in the original ticket. It respects the timeout on initial login fails but if it fails during the file transfer...hammer time.

My delay was set for 45 seconds, 99 retries, 30 second timeout.

My OS, as well as most of my apps, are set to run in dark mode as it is easier on the eyes.

I cannot locate a way to turn on dark mode in Filezilla, nor can I find a setting that forces it to use the OS settings. Can this be added to the client interface?

when the directory of file has a lot of subdirectories and FileZilla asks to overwrite a file over an existing file, the options are moved out of window (because of long names in directory) and it's not possible to scroll horizontally or change the size of window.

When connecting to a site it will initially connect but then when clicking on the first folder available it appears to be completely empty. There is no error code, the status says "directory listing of "/I-Drive" successful. Have tried to reconnect several times but no luck, the site was working normally until a few hours ago.

I have 2FA enabled on my server and so i need to have the 'Maximum number of simultaneous connections' set to 1, otherwise every file transfer triggers the 2FA request again. This has been working fine until the latest update (It is definitely working fine with version 3.57.0).

With the latest version (3.59.0) i can connect to my server but when i try and do the file transfer in the status window it just says 'Waiting for browsing connection' and never starts the download. If i change the simultaneous connections to 2 then it does work, but i need to constantly add the 2FA code.

Connection type - SFTP - SSH

FileZilla Client v3.59.0 Windows 7 Version 6.1 (Build 7601: Service Pack 1)

Steps to reproduce the bug:

• start FileZilla
• connect to a server
• upload a file to that server
• press "X" to close the FileZilla window

-> FileZilla still running in Process Explorer

Instead of moving items by dragging on the local side, it moves BUT leaves the original where it was, causing a duplicate to be developed.

I have an issue with sFTP transferts with files using a very long path length. The transfert can't start, it just creates an empty file in the remote folder) If I move my file up in the tree, no problem to complete the transfert

Transfer queue section looks bad/hard to read in desktop dark mode.

Improvement would be nice.

This crash occurs at various place when in the program:

1. GNU TLS error-110 connection not properly terminated.
2. Connection could not be established ECONN aborted - connection aborted.

The encryption option I use is "explicit FTP over TLS, if available."

Sometime the connection will re=establish and let me proceed for a few more steps. This happens on both ftp servers at Go Daddy and Inmotion Hosting. te problem started in mid-late May I updated Filezilla and then reinstalled it later with Version 3.01.6.

Oh, sometimes when I manage to upload files they upload with 0 Bytes. I have been using Filezilla for many many years and never had a problem until now.

狀態: 正在連線到 192.168.0.51:21... 狀態: 連線已建立, 正在等候歡迎訊息... 回應: 220 ProFTPD 1.3.5e Server (J51 FTP server) [192.168.0.51] 指令: AUTH TLS 回應: 234 AUTH TLS 成功執行 狀態: 正在初始 TLS... 錯誤: GnuTLS 錯誤 -8: A packet with illegal or unsupported version was received. 狀態: 以 "ECONNABORTED - 中止連線" 嘗試連線失敗. 錯誤: 無法連線到伺服器 =========================== FileZilla 3.55.1 can connect to this server (remove 3.60.1 , install 3.55.1) 狀態: 正在連線到 192.168.0.51:21... 狀態: 連線已建立, 正在等候歡迎訊息... 狀態: 正在初始 TLS... 狀態: 正在驗證憑證... 狀態: TLS 連線已建立. 狀態: 記錄 狀態: 正在取得目錄列表... 狀態: 成功取得 "/cad" 的目錄

Estado: A porta selecionada é habitualmente usada por um protocolo diferente. Estado: A resolver o endereço de getsftp1.getnet.com.br Estado: Conectando 201.87.186.27:22... Erro: Conexão expirou após 20 segundos de inatividade Erro: Não foi possível conectar ao servidor Estado: Aguardando para tentar novamente... Estado: A resolver o endereço de getsftp1.getnet.com.br Estado: Conectando 201.87.186.27:22... Erro: Conexão expirou após 20 segundos de inatividade Erro: Não foi possível conectar ao servidor Estado: Desconectado do servidor Estado: A porta selecionada é habitualmente usada por um protocolo diferente. Estado: A resolver o endereço de getsftp1.getnet.com.br Estado: Conectando 201.87.186.27:22... Erro: Conexão expirou após 20 segundos de inatividade Erro: Não foi possível conectar ao servidor Estado: Aguardando para tentar novamente... Estado: A resolver o endereço de getsftp1.getnet.com.br Estado: Conectando 201.87.186.27:22... Erro: Conexão expirou após 20 segundos de inatividade Erro: Não foi possível conectar ao servidor Estado: Desconectado do servidor Estado: A porta selecionada é habitualmente usada por um protocolo diferente. Estado: A resolver o endereço de getsftp1.getnet.com.br Estado: Conectando 201.87.186.27:22... Erro: Conexão expirou após 20 segundos de inatividade Erro: Não foi possível conectar ao servidor Estado: Aguardando para tentar novamente... Estado: A resolver o endereço de getsftp1.getnet.com.br Estado: Conectando 201.87.186.27:22... Erro: Conexão expirou após 20 segundos de inatividade Erro: Não foi possível conectar ao servidor

a Loungerie precisa de suporte para os erros acima, pois não está sendo possível baixar os arquivos hoje.

Most of Desktop Environments, like GNOME, use 'MimeType=' line from *.desktop files inside the '/usr/share/applications' and '~/.local/share/applications' directories.

This line make mime-type assosiation between program and file types, which this program support.

For FileZilla, this assosiation may be like this:

MimeType=x-scheme-handler/ftp;

If this line placed into filezilla.desktop file:

[Desktop Entry] Name=FileZilla ... MimeType=x-scheme-handler/ftp;

then Desktop Environment will be know, that '​ftp://' links, which mime-type is 'x-scheme-handler/ftp', may be opened by FileZilla program. Desktop Environment will know this from /usr/share/application/filezilla.desktop file.

Then, all clicks to '​ftp://' links from browser (Chrome, Firefox, Opera, etc.) may be quickly opened in the FileZilla program.

Please, add this line to 'data/filezilla.desktop' file:

MimeType=x-scheme-handler/ftp;

I am using VS Code and Live Sass Compiler. When I save the .scss file, It creates .css and .min.css files in temp folder on system but not uploading to live server. It was working fine on Last Friday in old version. Today I have downloaded the latest version facing this issue.

Recursive delete fails if there are any files to be uploaded. I have to run it at least twice to clear out files that need to be uploaded then run it again to clear out deleted files.

I cannot recall having any issues like this previously:

Status: Connecting to 194.68.59.6:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: TLS connection established. Status: Logged in Status: Retrieving directory listing of "/domains/skglimma.se/public_html"... Status: Directory listing of "/domains/skglimma.se/public_html" successful Status: Retrieving directory listing of "/domains/skglimma.se/public_html/CatchSQL"... Status: Invalid character sequence received, disabling UTF-8. Select UTF-8 option in site manager to force UTF-8. Status: Directory listing of "/domains/skglimma.se/public_html/CatchSQL" successful Status: Connecting to 194.68.59.6:21... Status: Connecting to 194.68.59.6:21... Status: Connection established, waiting for welcome message... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Initializing TLS... Status: TLS connection established. Status: TLS connection established. Status: Logged in Status: Starting download of /domains/skglimma.se/public_html/CatchSQL/Errol_Fångster_2020-10-15_1559_Start.sql Status: Logged in Status: Starting download of /domains/skglimma.se/public_html/CatchSQL/Errol_Fångster_2020-10-15_1600.sql Command: CWD /domains/skglimma.se/public_html/CatchSQL Response: 250 OK. Current directory is /domains/skglimma.se/public_html/CatchSQL Command: TYPE A Response: 200 TYPE is now ASCII Command: PASV Response: 227 Entering Passive Mode (194,68,59,6,138,190) Command: RETR Errol_Fångster_2020-10-15_1559_Start.sql Response: 550 Can't open Errol_Fångster_2020-10-15_1559_Start.sql: No such file or directory Error: Critical file transfer error Status: Starting download of /domains/skglimma.se/public_html/CatchSQL/Errol_Fångster_2020-10-15_1600_Start.sql Command: CWD /domains/skglimma.se/public_html/CatchSQL Response: 250 OK. Current directory is /domains/skglimma.se/public_html/CatchSQL Command: TYPE A Response: 200 TYPE is now ASCII Command: PASV Response: 227 Entering Passive Mode (194,68,59,6,137,223) Command: RETR Errol_Fångster_2020-10-15_1600.sql Response: 550 Can't open Errol_Fångster_2020-10-15_1600.sql: No such file or directory Error: Critical file transfer error Command: PASV Response: 227 Entering Passive Mode (194,68,59,6,138,193) Command: RETR Errol_Fångster_2020-10-15_1600_Start.sql Response: 550 Can't open Errol_Fångster_2020-10-15_1600_Start.sql: No such file or directory Error: Critical file transfer error Status: Disconnected from server Status: Disconnected from server

Somewhere something has changed. Windows was updated yesterday to the latest version.

Currently Filezilla Pro only show one's private folder, usually the same as the user's full name. It displays as the root (/) in the Filezilla client.

Dropbox Business has shared team folders but it's not possible to list them through the Filezilla Pro client. This would be a nice feature for Dropbox Business clients, which probably makes up for a good percentage of the users who wants to use your Dropbox integration.

Mer info about shared team folders: ​https://help.dropbox.com/teams-admins/team-member/team-folders

In the beta of macOS that I can not mention here, Filezilla reports as "damaged, please Trash the app" due to Gatekeeper not liking the fact that we are putting an fzdefaults.xml file into the app package when building an app package that contains that.

Is there an alternate method of surpressing update notifications that does not involve modifying the contents of the app package?

(If not, there will need to be for said new macOS that I can't mention...)

Hello,

On Windows 11 the local file change monitoring doesn't work. When I open the file and save it, the change popup in FileZilla doesn't appear. When I close the editing program and re-open it again, the popup apprears once the file editing software has re-opened.

I tested this with both Notepad++ and the built-in Windows Notepad.

I also tested this with Windows 10 and there I don't have the issue, I do however have this issue on all of my Windows 11 devices (3 different devices).

This issue is already there for at least a few months, I don't know exactly when it started but probably since Windows 11.

Regards, Bas

This seems to be happening at random when I close the client. Sometimes I will get a report like this, and other times it will exit with no issues. In both instances, I do not get a crash dialog, the program appears to exit just fine, but these events will show up in Event Viewer and Reliability report under Windows 10 and 11.

OS is Windows 11 64Bit. Platform is 12th Gen Intel Alder Lake, 12600K 32GB DDR4 Memory

I have attached crash dumps, so hopefully they reveal something.

Steps to reproduce the issue: Open Filezilla Client. Close Filezilla Client. You don't have to transfer or connect for the crash on exit to happen. It is intermittant.

Source FileZilla FTP Client

Summary Stopped working

Date ‎7/‎9/‎2022 1:18 PM

Status Report sent

Description Faulting Application Path: C:\Program Files (x86)\FileZilla FTP Client\filezilla.exe

Problem signature Problem Event Name: APPCRASH Application Name: filezilla.exe Application Version: 3.60.1.0 Application Timestamp: 00000000 Fault Module Name: libfilezilla-25.dll Fault Module Version: 0.37.2.0 Fault Module Timestamp: 00000000 Exception Code: c0000005 Exception Offset: 0006bfa0 OS Version: 10.0.22000.2.0.0.768.101 Locale ID: 4105 Additional Information 1: 0ae6 Additional Information 2: 0ae6a0829a15e53d618c7a5d1168fbf9 Additional Information 3: 5ee6 Additional Information 4: 5ee6bb8c36d6da3df6b1517d3eaecc1e

Extra information about the problem Bucket ID: 7fce7a87fd49ce6682ec8408d5ee4062 (1363609960670183522)

This issue probably isn't as specific as might be desired, but I feel obligated at this point to report this to the project.

I have been using FileZilla for many many years. Throughout the past year, the performance and usability of FileZilla has decreased significantly. It has gotten to the point where it has become a significant impediment to doing work, since I SFTP files very regularly in order to do work. Several major regressions have been introduced into the software in the past few months/past year or so, for example:

1) Permanent hangs. If you leave a tab alone for a while and then come back to it, after it has timed out, and then try to navigate on the server, it just will not. With synchronized browsing, you can try to navigate different folders and it will just whine "synchronized browsing operation already in progress" and never complete. If you try closing the tab, it will prompt for confirmation and then the dialog for creating a directory that isn't synchronized comes up, which is obviously completely out of place and wrong. Very messed up.

TL;DR - often times, if a session becomes "stale", then it is stuck that way and can't become "unstale" - you have to start ALL over.

Changing the timeout in settings from 20 to 0 has no effect.

The solution is to open an entirely new tab and then re-navigate to the path you were at. The new tab opens and connects instantly. However, this is very annoying as if you manually changed paths, you now have to find your way back to where you were, and when you have to do this dozens of times per day, that wastes A LOT of time. It got to the point where it was faster to just come back to FileZilla and open a new window and start all over again rather than trying to bother recovering the previous session.

2. Infinite loops. There are serious bugs in the software that can cause infinite loops. On multiple occasions, CPU usage has gone to 100%, even after FileZilla was closed, and it turned out to be filezilla.exe consuming 100% of CPU. Clearly something went very wrong, as even when closing the window the process didn't exit as I told it. This doesn't happen super frequently, but it's happened enough times to be vexing.

3. Corrupted transfers. Quite frequently, on certain servers especially, file transfers get truncated at some multiple of 256 bytes, and I might have to retry the transfer 2, 3, 4, 5, 6, 7, 8 etc. times before the entire file actually fully copies. (FileZilla does correctly show the transfer "failed").

As a result, I have been wasting 15+ minutes PER DAY just because of how broken FileZilla has become in the past year.

I have been able to notice the difference because I have been upgrading FileZilla normally on one system and I have a static copy of FileZilla Portable 3.44.1 on another system, from 2019. That system never has any issues, but the up-to-date one just gets worse and worse.

Today, I downgrade from the latest version that I had (3.60.1) to 3.44.1 and immediately noticed the difference. No hangs. No freezes. No issues. The software JUST WORKS as it used.

And then of course, a pop up comes up saying it's automatically downloaded 3.60.1 to the Downloads folder. No thanks - modern versions of FileZilla are no longer suitable for production usage. FileZilla has become so unusable these days I can't even stand it. As 3.44.1 works fine, I'll be using that indefinitely forever unless these issues are all resolved, as the software continues to perform noticeably worse with every upgrade.

Yes, I'm rating this "Blocker", because the fact is that the trunk release of FileZilla is essentially broken. Major functionality no longer works as it used to, and there are serious problems that need to be resolved before this project can carry on with releases as normal. There is zero point in you guys releasing any more versions of this software ever again unless all of these issues are fixed, because apparently the releases from 2019 will work much better anyways. I think the project should do a test of all the software releases since 2019 to find out where exactly these kinds of things went off the rails, as those issues need to be resolved if FileZilla in its current form is ever going to be usable in the future again.

Hi team,

It appears that one of our IPs is blocked from accessing Filezilla. Can we have the following list of IPs, owned by Netskope, allow listed? At the very least it seems 163.116.135.120 is being blocked. Our IP scope includes 163.116.128.0/17. When trying to access filezilla-project.org the IP receives a Bad Gateway error while other IPs in the same /24 work well.

Thank you,

Wil Tranchell

There's a few patches for libfilezilla that fixes the template order for the clang compiler in mingw mode and a fix for an include guard

Attached is a patch that allows filezilla to be compiled against clang in mingw mode and with lld

version 3.60.2