Custom Query (2163 matches)

When a file is added to the download queue it gets added to the bottom of the Queued files list.

There should be a setting on the Interface page where the user can elect to have the queued file list auto scroll to the bottom each time a new file is added.

This would be helpful when the user is adding multiple files as the list will scroll off the screen, so the user has to go to that section and scroll down to verify that the item was added.

The easier solution would be to have an option that when files are added to the download queue that new entries are added at the top of the list instead of the bottom, so new entries always appear at the top and the user can see that they were added to the queue succesfully.

hello my ftp server data is the following

ad: Nftp.vertical.ru log: Imagazine pass: <removed>

on windows version FileZilla it is connected ok but on macOS version FileZilla it can't be connected but on other FTP client for macOS it is connected very well please help

thank you for your help!

When uploading a large file (in my case ~300kB), the upload proceeds three or four times faster if I switch to a different folder while the upload is in progress. I assume this is because the software is updating the window with each block sent. It is something that could be improved.

When you scroll the Files window (Local or Remote) and then select a new Folder, the scrollbar should be reset to 0. Currently it retains the previous Folder scrollbar position which is no longer relevant.

I can't get access to my sites via ftp with Vodafone adsl but Win yes, where is the problem besause my primary line is Vodafonn . THANKS

Look at the picture... ;)

I tried to upgrade my copy of Filezila and it kept coming back saying it could not copy files, i think. I did a shutdown and restart of my system and it locked up in the process. I have to physically turn off the system and reboot. Got the same error again. Went to the web site and downloaded the client, this time it came down as "FileZilla_3.49.0_win64_sponsored-setup.exe". Same problem. I had done an update last June, and that version would install. Just thought you should know.

Hello, the S3 Secret Access Key is not saved anymore between sessions. Connecting works, but there is no access possible. This is occurring since we upgraded our installation yesterday. This is very annyoing. Thank you very much! Wolfgang

Almost every time I upload a folder with many subfolder to a server, a couple or three random files fail to upload.

If I just reset and requeue them, they never fail again. Also re-uploading the whole folder always work.

Until recently I was using a very old version of FileZilla (because, you know, Ubuntu), and I assumed this was fixed by this change that I found in the changelog:

3.37.3 (2018-10-01) Bugfixes and minor changes:

Fix issues with directory creation when uploading many files in

parallel

However, I'm now using 3.46.3 and the issue is not fixed.

I'm sure this has already been reported, but finding a bug report in this bugtracker is like finding a needle in a haystack.

See the screenshot.

This is a regression. I've starting seeing this after upgrading Ubuntu from 16.04 to 20.04

Hello,

For 1 week and a half I have had a problem uploading detos to a server, when I upload files of more than 4 GB there are times that they give me errors and they don't end up uploading.

I have tried to re-install it and am still having the same problems.

I would need help to see if it can be solved or if it is a problem external to you, because another partner has tried to upload them and gives you the same error.

A greeting.

I have never had issues being able to view/edit a file. I have always used UltraEdit (current version 27.00.0.72). The transfer says successful when selecting view/edit. The files have always been placed in a temp folder but now all that is in the temp folder is a lock file fz3temp-lockfile of zero bytes. I updated setting to use the system default editor for text files and that did not work. Here is the setting for UltraEdit "C:\Program Files\IDM Computer Solutions\UltraEdit\uedit64.exe". This has worked for years. I am able to FTP the files from the server to my PC. I am attach the debug log with Windows and FileZilla version. I use this option religiously and would really like some help. I did read the forum pages and looked though the tickets but nothing seems to match my issue.

Accepted the prompt to upgrade FileZilla to the latest stable yesterday, now I cannot transfer files. Transferring to server pops up an error that the file already exists. It immediately appears on the right with zero byte size. None of the suggested actions give the desired results (overwrite, resume rename etc). Deleting the file works OK.

This error appears in the command log box at the top: Error: GnuTLS error -110 in gnutls_record_recv: The TLS connection was non-properly terminated.

In folders only "9998 files" are listed, alphabetically, obmitting the last files of the list.

If you need to retrieve or delete those files from folder, you can't through Filezilla.

It could be useful if this limit can be removed, since remote folders are able to contain more than 9998 files.

Thanks a lot

Hi, good morning, I was going to go into my FileZilla, to start working on my Garry's Mod server, and it wont let me log in. All the credentials are correct, it just says. Thank you for your time. Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of cp-dal08.gmchosting.com Status: Connecting to 137.83.91.20:8855... Status: Connection attempt failed with "ECONNREFUSED - Connection refused by server". Error: Could not connect to server

I am having rouble activating the software. I did the installation and put in the requested credentials, host, domain and port info, etc... and I get the below error message: Error: GnuTLS error -110 in gnutls_record_recv: The TLS connection was non-properly terminated. Status: Server did not properly shut down TLS connection Error: Could not read from socket: ECONNABORTED - Connection aborted Error: Disconnected from server

Unable to login to inventive-engineering FTP, I can login to other clients FTPs with no issues but I get the following when trying to login to inventive-engineering and it seems to time out:

Status: Resolving address of ftp.inventive-engineering.com Status: Connecting to 194.78.36.98:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Logged in Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (194,78,36,98,35,17). Command: MLSD Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listing Status: Disconnected from server Status: Resolving address of ftp.inventive-engineering.com Status: Connecting to 194.78.36.98:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Status: Logged in Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (194,78,36,98,34,215). Command: MLSD Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listing

I just installed and launched from macOS App Store. Version is 3.49.2. On first launch, I was prompted to subscribe (which I did) then to select allowed directories (which I did). Then, the application window opened and is too high on the screen for me to access the titlebar and toolbar buttons. See screenshot attached.

Note I launched this on a monitor that has lower resolution (which may be the catalyst). However, I have tried dragging to a new window using macOS Expose (since I can't drag the window by its titlebar which is inaccessible). The window moves to the new monitor but is still too high on the screen to be usable.

If a queue is in progress and I change priority or the sorting (local file, remote file, size), then those changes are ignored. In order for it to be respected, I have to stop the queue, sort or update priorities, then start again.

Another related issue, ignoring priority here (let's assume all set to the same priority), newer files added to the queue while it's in progress get selected next after a current file has finished, instead of going to the next one in line. (ie, not doing "first come, first served.")

The priority was said to be fixed based on #11932, but it appears it hasn't. The mention of the sorting is just an added "bonus" I have noticed.

I verified I am using the latest version (3.49.1) before starting this ticket.

Simple enough (to describe).

Be able to sort by the date/time that items were added to the queue, and for all sorting options, be able to reverse the order. ie, clicking size currently does small->large, but make it so clicking it again will do large->small.

Hi. Thanks for this excellent software. I use 3.49.1. I have a very slow upload channel (ca. 60 kiB/s). I often upload pictures (small ones, thumbs) as well as larger videos (> 100 MiB). When a very large file (video) is to be uploaded, the smaller ones next transfer very fast, but the large one goes down to less than 1 kiB/s. And very often the connection fails due to inactivity. I have checked with my Fritz box that the upload from the box to the server provider is not causing the failure (this is always at max). Also the WLAN is not the cause because channel activity is low. So Filezilla is the only problem that is left as probable cause. Is there load balancing in Filezilla? Why does it fail here? brgs, gerhard

This may seem silly, but for those of us who work on audio software, the "ding" on file transfer is quite annoying.

You say "turn down the volume", or "change your default speaker", both reasonable under most circumstances. But when in heavy test mode, which requires audio to be on, the ding on transfers is annoying at best, and invasive at worst.

So, what I am asking for is a "mute audio" selection somewhere in user prefs.

Thanks.

We have two servers that we use with Filezilla one hosted by ourselves and one by a third party.

As of yesterday we are no longer able to connect to either - we have tried on a few different accounts with IPs that are cleared for access but none appear to be working.

We have checked with our development team and the details we are entering and correct and were working prior to yesterday.

When attempting to connect we get error "Unable to connect to server". One of the servers is part of a covid tracker so it is vital we can update it ASAP. We have updated to the latest version of Client but still no luck.

When I try to connect the server it present the following messages, other people that has access to the host can connect normally:

Status: Resolving address of ftp.brasilnutrishop.com.br Status: Connecting to 209.188.87.180:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 6 of 50 allowed. Response: 220-Local time is now 12:21. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: AUTH TLS Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server Status: Waiting to retry... Status: Resolving address of ftp.brasilnutrishop.com.br Status: Connecting to 209.188.87.180:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 7 of 50 allowed. Response: 220-Local time is now 12:21. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: AUTH TLS Error: Connection timed out after 20 seconds of inactivity Error: Could not connect to server

I have the current version of FileZilla Client 3.50.0 on Windows 10 with all updates and drivers on my desktop and my new laptop; I can quick connect on the desktop; I cannot quick connect on my new laptop; I have compared the setting on both systems and they are the same

verbose debug from new laptop that does not work: Trace: CControlSocket::SendNextCommand() Trace: CFtpLogonOpData::Send() in state 0 Status: Resolving address of www.riouxgenealogy.org Status: Connecting to 160.153.92.103:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 1 of 500 allowed. Response: 220-Local time is now 12:37. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220 You will be disconnected after 15 minutes of inactivity. Trace: CFtpLogonOpData::ParseResponse() in state 1 Trace: CControlSocket::SendNextCommand() Trace: CFtpLogonOpData::Send() in state 2 Command: AUTH TLS Trace: CFtpControlSocket::OnReceive() Response: 234 AUTH TLS OK. Trace: CFtpLogonOpData::ParseResponse() in state 2 Status: Initializing TLS... Trace: tls_layer_impl::client_handshake() Trace: tls_layer_impl::continue_handshake() Trace: tls_layer_impl::continue_handshake() Trace: tls_layer_impl::continue_handshake() Trace: tls_layer_impl::continue_handshake() Trace: tls_layer_impl::continue_handshake() Trace: tls_layer_impl::continue_handshake() Trace: TLS Handshake successful Trace: Protocol: TLS1.2, Key exchange: ECDHE-SECP256R1-RSA-SHA384, Cipher: AES-256-GCM, MAC: AEAD Trace: tls_layer_impl::verify_certificate() Trace: Hostname does not match certificate SANs Status: Verifying certificate... Trace: CFtpControlSocket::SetAsyncRequestReply Error: Remote certificate not trusted. Trace: CFtpControlSocket::ResetOperation(70) Trace: CControlSocket::ResetOperation(70) Trace: CFtpLogonOpData::Reset(70) in state 4 Error: Critical error: Could not connect to server Status: Disconnected from server Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Trace: CFtpControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Trace: CControlSocket::ResetOperation(66) Trace: CControlSocket::SendNextCommand() Trace: CFtpLogonOpData::Send() in state 0 Status: Resolving address of www.riouxgenealogy.org Status: Connecting to 160.153.92.103:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 1 of 500 allowed. Response: 220-Local time is now 12:40. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220 You will be disconnected after 15 minutes of inactivity. Trace: CFtpLogonOpData::ParseResponse() in state 1 Trace: CControlSocket::SendNextCommand() Trace: CFtpLogonOpData::Send() in state 2 Command: AUTH TLS Trace: CFtpControlSocket::OnReceive() Response: 234 AUTH TLS OK. Trace: CFtpLogonOpData::ParseResponse() in state 2 Status: Initializing TLS... Trace: tls_layer_impl::client_handshake() Trace: tls_layer_impl::continue_handshake() Trace: tls_layer_impl::continue_handshake() Trace: tls_layer_impl::continue_handshake() Trace: tls_layer_impl::continue_handshake() Trace: tls_layer_impl::continue_handshake() Trace: tls_layer_impl::continue_handshake() Trace: tls_layer_impl::continue_handshake() Trace: TLS Handshake successful Trace: Protocol: TLS1.2, Key exchange: ECDHE-SECP256R1-RSA-SHA384, Cipher: AES-256-GCM, MAC: AEAD Trace: tls_layer_impl::verify_certificate() Trace: Hostname does not match certificate SANs Status: Verifying certificate... Trace: CFtpControlSocket::SetAsyncRequestReply Error: Remote certificate not trusted. Trace: CFtpControlSocket::ResetOperation(70) Trace: CControlSocket::ResetOperation(70) Trace: CFtpLogonOpData::Reset(70) in state 4 Error: Critical error: Could not connect to server

I check the box "Always trust this certificate in future sessions." but there is no OK or Save button; I close the window and try again with the same results

here is the successful quick connect from the desktop that does work Trace: CControlSocket::SendNextCommand() Trace: CFtpLogonOpData::Send() in state 0 Status: Resolving address of www.riouxgenealogy.org Status: Connecting to 160.153.92.103:21... Status: Connection established, waiting for welcome message... Trace: CFtpControlSocket::OnReceive() Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 1 of 500 allowed. Response: 220-Local time is now 13:03. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220 You will be disconnected after 15 minutes of inactivity. Trace: CFtpLogonOpData::ParseResponse() in state 1 Trace: CControlSocket::SendNextCommand() Trace: CFtpLogonOpData::Send() in state 2 Command: AUTH TLS Trace: CFtpControlSocket::OnReceive() Response: 234 AUTH TLS OK. Trace: CFtpLogonOpData::ParseResponse() in state 2 Status: Initializing TLS... Trace: tls_layer_impl::client_handshake() Trace: tls_layer_impl::continue_handshake() Trace: tls_layer_impl::continue_handshake() Trace: tls_layer_impl::continue_handshake() Trace: tls_layer_impl::continue_handshake() Trace: tls_layer_impl::continue_handshake() Trace: tls_layer_impl::continue_handshake() Trace: tls_layer_impl::continue_handshake() Trace: TLS Handshake successful Trace: Protocol: TLS1.2, Key exchange: ECDHE-SECP256R1-RSA-SHA384, Cipher: AES-256-GCM, MAC: AEAD Trace: tls_layer_impl::verify_certificate() Trace: Hostname does not match certificate SANs Status: Verifying certificate... Trace: CFtpControlSocket::SetAsyncRequestReply Status: TLS connection established. Trace: CControlSocket::SendNextCommand() Trace: CFtpLogonOpData::Send() in state 6 Command: USER genealogy Trace: CFtpControlSocket::OnReceive() Trace: CFtpControlSocket::OnReceive() Response: 331 User genealogy OK. Password required Trace: CFtpLogonOpData::ParseResponse() in state 6 Trace: CControlSocket::SendNextCommand() Trace: CFtpLogonOpData::Send() in state 6 Command: PASS Trace: CFtpControlSocket::OnReceive() Response: 230-Your bandwidth usage is restricted Trace: CFtpControlSocket::OnReceive() Response: 230 OK. Current restricted directory is / Trace: CFtpLogonOpData::ParseResponse() in state 6 Trace: CControlSocket::SendNextCommand() Trace: CFtpLogonOpData::Send() in state 7 Command: SYST Trace: CFtpControlSocket::OnReceive() Response: 215 UNIX Type: L8 Trace: CFtpLogonOpData::ParseResponse() in state 7 Trace: CControlSocket::SendNextCommand() Trace: CFtpLogonOpData::Send() in state 8 Command: FEAT Trace: CFtpControlSocket::OnReceive() Response: 211-Extensions supported: Response: EPRT Response: IDLE Response: MDTM Response: SIZE Response: MFMT Response: REST STREAM Response: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; Response: MLSD Response: AUTH TLS Response: PBSZ Response: PROT Response: UTF8 Response: TVFS Response: ESTA Response: PASV Response: EPSV Response: SPSV Response: ESTP Trace: CFtpControlSocket::OnReceive() Response: 211 End. Trace: CFtpLogonOpData::ParseResponse() in state 8 Trace: CControlSocket::SendNextCommand() Trace: CFtpLogonOpData::Send() in state 10 Command: OPTS UTF8 ON Trace: CFtpControlSocket::OnReceive() Response: 200 OK, UTF-8 enabled Trace: CFtpLogonOpData::ParseResponse() in state 10 Trace: CControlSocket::SendNextCommand() Trace: CFtpLogonOpData::Send() in state 11 Command: PBSZ 0 Trace: CFtpControlSocket::OnReceive() Response: 200 PBSZ=0 Trace: CFtpLogonOpData::ParseResponse() in state 11 Trace: CControlSocket::SendNextCommand() Trace: CFtpLogonOpData::Send() in state 12 Command: PROT P Trace: CFtpControlSocket::OnReceive() Response: 200 Data protection level set to "private" Trace: CFtpLogonOpData::ParseResponse() in state 12 Status: Logged in Trace: Measured latency of 105 ms Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpLogonOpData::Reset(0) in state 15 Trace: CControlSocket::SendNextCommand() Trace: CFtpListOpData::Send() in state 0 Status: Retrieving directory listing... Trace: CFtpChangeDirOpData::Send() in state 0 Trace: CFtpChangeDirOpData::Send() in state 1 Command: PWD Trace: CFtpControlSocket::OnReceive() Response: 257 "/" is your current location Trace: CFtpChangeDirOpData::ParseResponse() in state 1 Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpChangeDirOpData::Reset(0) in state 1 Trace: CFtpListOpData::SubcommandResult(0) in state 1 Trace: CControlSocket::SendNextCommand() Trace: CFtpListOpData::Send() in state 2 Trace: CFtpRawTransferOpData::Send() in state 0 Trace: CFtpRawTransferOpData::Send() in state 1 Command: TYPE I Trace: CFtpControlSocket::OnReceive() Response: 200 TYPE is now 8-bit binary Trace: CFtpRawTransferOpData::ParseResponse() in state 1 Trace: CControlSocket::SendNextCommand() Trace: CFtpRawTransferOpData::Send() in state 2 Command: PASV Trace: CFtpControlSocket::OnReceive() Response: 227 Entering Passive Mode (160,153,92,103,198,214) Trace: CFtpRawTransferOpData::ParseResponse() in state 2 Trace: CControlSocket::SendNextCommand() Trace: CFtpRawTransferOpData::Send() in state 4 Trace: Binding data connection source IP to control connection source IP 192.168.1.77 Trace: tls_layer_impl::client_handshake() Trace: Trying to resume existing TLS session. Command: MLSD Trace: tls_layer_impl::continue_handshake() Trace: CFtpControlSocket::OnReceive() Response: 150 Accepted data connection Trace: CFtpRawTransferOpData::ParseResponse() in state 4 Trace: CControlSocket::SendNextCommand() Trace: CFtpRawTransferOpData::Send() in state 5 Trace: tls_layer_impl::continue_handshake() Trace: TLS Handshake successful Trace: TLS Session resumed Trace: Protocol: TLS1.2, Key exchange: ECDHE-SECP256R1, Cipher: AES-256-GCM, MAC: AEAD Trace: tls_layer_impl::verify_certificate() Trace: CTransferSocket::OnConnect Trace: CTransferSocket::TransferEnd(1) Trace: tls_layer_impl::shutdown() Trace: tls_layer_impl::continue_shutdown() Trace: CFtpControlSocket::TransferEnd() Trace: CFtpControlSocket::OnReceive() Response: 226-Options: -a -l Trace: CFtpControlSocket::OnReceive() Response: 226 29 matches total Trace: CFtpRawTransferOpData::ParseResponse() in state 7 Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpRawTransferOpData::Reset(0) in state 7 Trace: CFtpListOpData::SubcommandResult(0) in state 3 Trace: CFtpControlSocket::ResetOperation(0) Trace: CControlSocket::ResetOperation(0) Trace: CFtpListOpData::Reset(0) in state 3 Status: Directory listing of "/" successful

Tom Rioux 512-422-8682 Austin, Texas

In previous versions of filezilla, ive been able to login to an ftp site automatically via sitemanager, then select manual transfer from the Transfer menu, select a file to upload manually, and set the associated options for the upload, then just click the ok button, and the file would upload "automatically" without me having to put in the login details, as it would automatically use the login details for the currently logged in session.

This process no longer seems to work in filezilla 3.50.0, ive been scractching my head over why my file was not succesfully uploading, as in the past it would just automatically work.

i tried experimenting with the settings on the manual transfer menu, but i can only get the login details to fill in correctly if i fiddle about a bit.

The actual sequence i need to follow to get the correct login details to be pre-filled, is a bit bizarre, and i shouldnt need to do this, it should follow the same behaviour as it always did in the past which was to default to the using the login details etc for the currently logged in server.

Here is what i need to do now, to get it to fill in the correct login details when i switch to manual transfer, when i am already logged into a server:

I need to click the "use server from site manager" radio button then the "Select Server" button and select the same server that i am currently logged into. This on its own does not fill in the password, as you would expect, instead, i then need to go back and click the "Use server currently connected to" radio button, and then it fills in the password field correctly.

This is a pretty odd bug, i hope you can fix this as its very annoying.

When i search in one tab then open another tab , when second tab shows blank content , So i need to again Press(Cntl + F) and clear the search bar then tab shows directory list. So i think when new tab opens why search filter applies by default to it.

not local and not on site

I am unable to connect Filezilla app to my PS3 so I can use FTP

Using refresh normally had the effect of reorganizing the folder windows. Now it doesn't anymore. The slider doesn't go to the new file. The view is not reorganized so that you see the new files.

I have left the FTP to transfer thousands of files but it keeps crashing every 250000 files or so (roughly). My workaround is to right click the file queue and export the queue because it seems to still allow that. Then I can restart Filezilla to try again.

This is Windows Server 2012 R1 but the problem could exist on any for all I know.

With this error attached.

I want to connect to ftp.digiland.it associated to IP 213.209.17.162 but filezilla always points to IP 212.48.15.179

Filezilla is giving me an error when trying to connect to an already established connection. FATAL ERROR: Network error: Software caused connection abort Error: Could not connect to server

Is there a possible remedy to this? Please help ASAP. Thanks

I reported this bug on ​lets encrypt and was told that it's a Filezilla bug

Reproduction steps, taken from the internal documentation for my company, which I've written, doing dns verification method, on windows 10, uploading to centos, using latest version of Filezilla, over sftp.

1. ​Download certbot for windows and run it in Powershell as administrator

2. do this command

certbot certonly --manual --preferred-challenges=dns --email examil@example.com --server https://acme-v02.api.letsencrypt.org/directory --agree-tos --manual-public-ip-logging-ok -d *.example.com -d example.com

3. Once done the certificates will be downloaded to C:/Certbot, upload everything inside that folder to /etc/letsencrypt . Override all existing files in that folder, if that folder doesn't exist, create it.

Okay now when doing this

Note: make sure that the files inside C:\Certbot\live\example.com are uploaded correctly to /etc/letsencrypt/live/example.com because often filezilla fails to upload those

if I just upload what's in certbot folder to the empty /etc/letsencrypt/live/, only the readme file will be uploaded. All other files get uploaded correctly

If I then go to C:\Certbot\live\example.com And upload to /etc/letsencrypt/live/example.com everything gets uploaded correctly.

So it's not a permission error. Does anyone have a clue what's happening?

In the site manager, when adding a sftp site with Logon Type = Key file, the file selector for the private key does not show files without extensions. The linux ssh-keygen utility creates private keys without extension by default (id_rsa).

Version 3.50 update - When I set a pdf to open it still downloads like a previous version that was broken and fixed.

So Im running 3.47.2.1 , but I cant turn on of stupid New version to download message, even tho I have it set to Never, AND in AppData\Roaming\FileZilla\filezilla.xml set to disable updates.

It ftp's fine from the desktop with WIN 10 to our master Website www.biblebelievers.org.au

It will not connect from the desktop connect to our secondary Website biblebelievers.worthyofpraise.org

Please advise and assist.

ags@…

Anthony Grigor-Scott

Does anyone else wish that it were possible to create a new file in the local pane? It’s something I find myself wanting to do for various reasons. For example, I have just retrieved some files from a server, and wanted to place a readme into the same directory. Or, I may want to create a local file first, enter some content, and only upload it when done.

It just seems like, since the option exists for the remote pane, it would make sense for it to also exist in the local pane.

(Granted, it would be inferior to Explorer’s (rather terrible) New menu, but for plain-text files, it would suffice, and even Word’s new file is 0 bytes, rather than pulled from a template.)

I'm using version 3.50.0 for updating website files on the server.

At present I can't rely on FileZilla to overwrite files reliably. The only sure way to do so is to delete the existing file on the server and then upload the new one.

Sometimes the first "Upload" click on the client-side file has no effect at all. More times there is a change to the date of the server file but it still is not the same size as the client-side file.

Surely, an overwrite ought to be total - and totally reliable.

For some unknown reason the local directory tree keeps collapsing because of the bug this ticket references. Just in case the terminology isn't clear I've prepared a screenshot with the local directory tree's header outlined in red. The directory tree that keeps collapsing is below. I've obviously checked to ensure that I'm using the latest version. I think this is a regression as this only seems to have started happening the past few weeks and I use the program on a near-daily basis.

Status: Resolving address of www.TYPINGSERVICESOFHOUSTON.COM Status: Connecting to 160.153.94.137:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Command: USER brazosvalley Response: 331 User brazosvalley OK. Password required Command: PASS Response: 530 Login authentication failed Error: Critical error: Could not connect to server

I cannot access a server. I always get the message: Estado: Aguardando para tentar novamente... Estado: A resolver o endereço de ftp.saopaulo.sdl.com Estado: Conectando 52.25.152.233:21... Estado: Conexão estabelecida, esperando mensagem de boas-vindas... Resposta: 220 Serv-U FTP Server v15.1 ready... Comando: AUTH TLS Erro: Conexão expirou após 20 segundos de inatividade Erro: Não foi possível conectar ao servidor Please, help me, I need to access this server to pick up a task. I am a translator e can't work without access it. Using : Windows 10 - Intel core 5 8th gen. McAfee Intenet Security ( already desabled Firewall, but noting help. Tks

I often use FileZilla to modify my website files, before I do I always backup the file before modifying. Currently I do this by:

(1) Transfer the file locally (2) Rename the remote file xxxx.bak (3) Modify the local file (4) Upload the local file

It would be so much easier if I could just duplicate the remote file like you can in Windows File Manager. Even if I just end up with a 'Copy of xxx' this would make things easier but if you want to knock the ball out of the park, then a 'Duplicate and edit' feature would be such a timesaver.

Use case would be:

(a) Right click file, choose 'Duplicate and edit' (b) Filezilla renames existing file xxx.bak (c) FileZilla copies renamed file as original filename (d) Filezilla opens new file for edit e.g. in Notepad++

Then all I have to do is make my edit, click save (the normal 'This file has changed...' dialogue would then re-upload the modified file as normal.

When using FileZilla Client, if I select a menu item, the item panel from the menu remains on the screen after the item is activated. In fact, it remains after the program is closed. I have to log off the computer to get rid of it. The problem appeared in the prior release of FZ Client. I hoped it would go away, but I have updated this morning and the problem remains. I have attached a screenshot where my Dreamweaver dialog box is being obscured by the left over "Manage Sites..." menu selection, even after the client has been closed.

Dear Sir,

I would like to make a proposal for automatic uploads of small files to avoid the popup window requesting confirmation.

I have been using this patch since quite some time now and I saw that many people over time keep asking for that. I also know this was already discussed several times.

Anyhoo, this patch includes a safe upload (avoiding file corruption) of the modified files and only applies to files smaller than 1MB. NB: The current patch is quite simple and do not provide any customization of the parameters (e.g. user could chose the max size for automatic upload or to disable/enable the feature by default)

Thank you for your consideration.

Best regards, Marco

Hello, I have FileZilla installed on 2 windows 10 desktops. Both have the same quick connect connection. One desktop can open excel files in FileZilla, the other desktop you need to transfer file locally in order for it to be opened. Can we do a remote session so you can see the issue more clearly?

Thank you

Steps to reproduce:

1. Go to Site Manager; edit or create a site
2. For "Protocol" choose SSH, and for "Logon type" choose "key file"
3. Click the "Browse..." button to browse for a key file
4. Browse to a directory that contains a private key file whose name does not contain any dot
5. In the file type dropdown selector at the bottom (by default "ppk files") select "All files"

Expected: Since I have selected "All files", all files in the folder should be shown. Since there is a valid file as per step 4 (the fact that it has no extension should be irrelevant), that file should be shown, among others if any.

Observed: The file is not listed.

The file is readable by my user. If I rename the file so it has ANY extension (e.g. "mykeyfile.wtf" instead of just "mykeyfile"), then the file is listed. And in this case I have tried selecting it and it works, confirming that it is a valid file (but this is not relevant because invalid files are also listed and you can choose them, then you'll get an error message when you try to use them).

So, when "all files" is selected, you show files with any extensions, but only if they do have an extension, that is, if the file name contains at least one dot. That makes no sense and it's something I've never seen anywhere else.

This would help organizing files during transfer.

I would like files to be optionally automatically renamed (prefix/suffix) and/or moved to a specified remote directory after finishing its individual download.

I backed up files from my mobile phone using ES File Explorer's FTP server. Sadly, it messes up dates and times. Amaze file manager and Primitive FTPd however report times correctly.

But I don't want to download all files again, just set the dates and imes of the local files to the original remote files.

I suggest implementing such an option.

There is a remote file search feature.

I suggest the ability to export the search results (including time attribute and full remote paths) into an XML or JSON file.

It is already possible for the queue, the failed transfer list and successful transfer list.

Changing a file during downloading is possible thanks to the inode system used by Linux.

But I suggest allowing changing it while in queue, to prevent forgetting it until the transfer has finished.

Sehr geherte Damen und Herren, beim einspielen eines Backups ist mir aufgefallen das FileZilla nicht alle Daten per FTP transferiert. Beispiel: ich möchte den Ordner meiner Wordpress-Installation sichern, FileZille sagt mir das alles heruntergalden ist aber die Ordner wp-admin und wp-includes wurden nicht mit herunter geladen. Die Ordnerberechtugungen lautet 755. Wenn ich die Ordner versuche einzeln herunterzuladen geschieht dies nicht. Wo liegt der Fehler?

Mit freundlichen Grüßen Martin Frickmann

In other software that have the ability to rename files (photo organizers like Thumbsplus, for example), when you choose to rename a file the default portion of the filename selected is the name excluding the extension. This avoid changing the extension by mistake and, honestly, speeds up the renaming process since most of the times only the name is meant to be changed.

Every time I turn off the computer, if I don't close the FileZilla window, I get this error (in the attachment). The error is about a year old. I used to use Windows 7, but I thought it would disappear when I switched to Windows 10.

How to repeat bug:

1. Open FileZilla
2. Click "Shut down Windows" or press power button.
3. A dialog appears with an error.

I installed Filezilla on a USB drive so I could carry it with me and use on a public computer.

Works great !!!

Problem is server definitions are apparently not saved in installation directory on USB drive, since when I went to a different public computer, my site management server definitions were gone, and I had to create them all over again.

Need to retain these server definitions in the installation directory one id running the program from.

Hi, I can't find what name my host is. Could you help?

Hi, Could you help explain possibly why our file folders keep disappearing with all of our images in them for our website? It happened yesterday afternoon and we started rebuilding and it just happened again. Thank you, Emily Cooksey emily@…

I just purchased FileZilla Pro in order to upload/download files from Google Drive. I noticed that when uploading files TO Google Drive from my computer, the modified date/time stamps are listed correctly on Google Drive. However, when downloading FROM Google Drive, the modified date/time stamps reflect the current system date/time and not the original date/time stamps.

In the first screen shot, you'll see that I uploaded 12 files from the local "SMS Backup" folder to the remote "SMS Backup" folder on Google Drive. The date/time stamps are correct on Google Drive.

In the second screen shot, I downloaded the same files FROM Google Drive to a local folder named "kill test" as a test of the process. You'll notice that the local date/time stamps are the current system date/time when the files are downloaded.

I use a separate application (​https://webdrive.com/) which maps Google Drive to a local drive letter, similar to a Windows network. When downloading files from this application, the modified date/stamps are correct.

Can you advise?

I am downloading multiple TV shows and notice that some of the files do not completing download. The client appears to simply stop the downloading of the file, but moves it into the completed list. When I resubmit the list to be downloaded and select the resume (all) options, it sees that some of the files are not fully downloaded and continues. Sometime that will again fail and I have to resubmit again.

I am running a windows 10 on the latest release software with a COX Gigabyte connection.

For my company's use of FileZilla, we frequently need to browse remote directories and download files, but it's very very rare that we'd need to upload a file. There's no good default double-click behavior configuration for us, because what we really want is for double-clicks on remote files to transfer but for double-clicks on local files to open. Instead, we have to choose between not being able to use double-clicks to download files or risking accidental uploads.

I hope this feature request—splitting the double-click settings into a local setting and a remote setting—wouldn't be too hard to implement. It sounds silly but it would really make a big difference for all of us (there's a lot of us with Pro licenses that I'm making this ticket on behalf of).

Since last version deployed with SCCM on our enterprise computers (3.51.0). When checking the settings, I've discovered that the proxy password is now displayed in clear text instead of stars !

Path: Menu "Edit" > "Settings..." > "Connection" > "FTP" > "FTP Proxy" > field "Proxy password" at the end of the page. (see attached printscreen)

This cause a security breach from our enterprise perspective and prevent us to use your product.

We are running Windows 10 1803 and 1909 64b.

Details: FileZilla Client

Version: 3.51.0

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2020-10-20 Compiled with: x86_64-w64-mingw32-gcc (GCC) 8.3-win32 20190406 Compiler flags: -O2 -g -Wall -Wextra -pedantic -ffunction-sections -fdata-sections -Wno-cast-function-type

Linked against:

wxWidgets: 3.0.6 SQLite: 3.31.1 GnuTLS: 3.6.15

Operating system:

Name: Windows 10 (build 17134), 64-bit edition Version: 10.0 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi bmi2 adx lm Settings dir: C:\Users\\AppData\Roaming\FileZilla\

Hi guys,

I'm a big fan of Filezilla and I've been using it for years.

I'm working in a new role here and I have to deal with multiple VPNs to access multiple datacenter.

To do so, I run many small docker instance with their own VPN client and a socks proxy. Doing so, I avoid network collision and software limitation of running simultaneous VPN clients.

But, when times come to use Filezilla to access one of those machines via SFTP, I have to manually update the general settings 'Generic proxy' configuration of the client each time if I want to use a different socks proxy.

I would appreciate if Filezilla client can have a section in the 'Advanced' pane of each site definition to fill specific proxy configuration to use for a given site definition.

Currently the only option is 'Bypass proxy' but that doesn't make it in my case, since I want to use a proxy but an alternate one.

I updated FileZilla and uploaded to my websites. Both now are getting 404 errors. 3rd that was not updated is fine.

​https://freepages.rootsweb.ancestry.com/~hillmer/genealogy/Hillmer/index.htm ​https://freepages.rootsweb.com/~hillmer/genealogy/DNA/index.htm ​https://freepages.rootsweb.com/~hillmer/genealogy/Newby/index.htm

I use Second Site to create my genealogy website. SS's review prior to upload looked great.

My previous version had no problems

FileZilla Client

Version: 3.51.0

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2020-10-20 Compiled with: x86_64-w64-mingw32-gcc (GCC) 8.3-win32 20190406 Compiler flags: -O2 -g -Wall -Wextra -pedantic -ffunction-sections -fdata-sections -Wno-cast-function-type

Linked against:

wxWidgets: 3.0.6 SQLite: 3.31.1 GnuTLS: 3.6.15

Operating system:

Name: Windows 10 (build 18363), 64-bit edition Version: 10.0 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi bmi2 adx lm Settings dir: C:\Users\Owner\AppData\Roaming\FileZilla\

every time, I run FileZilla using ssh on both local IP and remote it hangs when I search folders or try to carry out any operation. it also hangs when searching and opening folders on local machine.

FileZilla is set to allow full access to disk and access private folders.

It hangs on NFS and SMB/CIFS shares within any file structure this never happen previously

I have never had an issue with any previous version on any OS hence using Pro Version

filizilla build

FileZilla Pro

Version: 3.51.0

Build information:

Compiled for: x86_64-apple-darwin19.6.0 Compiled on: x86_64-apple-darwin19.6.0 Build date: 2020-10-21 Compiled with: Apple clang version 12.0.0 (clang-1200.0.32.21) Compiler flags: -O2 -g -Wall -Wextra -pedantic -O2 -g -Wall -Wextra -pedantic -Werror=partial-availability

Linked against:

wxWidgets: 3.0.6 SQLite: 3.31.1 GnuTLS: 3.6.15

Operating system:

Name: Mac OS X (Darwin 20.1.0 x86_64) Version: 10.16 CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi bmi2 adx lm Settings dir: /Users/christopherswain/Library/Containers/org.filezilla-project.filezilla.sandbox/Data/.config/filezilla/

Mac Details

Model Name: iMac

Model Identifier: iMac19,1 Processor Name: 6-Core Intel Core i5 Processor Speed: 3 GHz Number of Processors: 1 Total Number of Cores: 6 L2 Cache (per Core): 256 KB L3 Cache: 9 MB Memory: 40 GB System Firmware Version: 1554.50.2.0.0 SMC Version (system): 2.46f12

As you can see my machine is unto date including all software

Right-click option to create new site (in current folder) or new subfolder.

I always right-click on a folder to create a new site, but it's not possible. The only option is export.

Thanks for considering.

Apparently, Filezilla pro sends the request to the root folder. Is this conform with the mkcol method definition? As I understand, the "to be created" collection should be part of the request url

So if I wan to create collection "test" within "home", the request shoud be like MKCOL /home/test

and NOT

MKCOL /home

To reproduce:

1. Upload a folder that contains some empty folders
2. Upload it again

Expected behavior:

• the first time, if the subfolders don't already exist on the server, they will be created
• the second times, no folders will be created on server as they already exist.

Nothing should be listed in "failed transfers" as no transfer has failed

Observed: After the second time (or already the first if any if the empty folders already existed on the server), the empty folders will be listed in the "Failed transfers" tab. That makes no sense whatsoever because you don't upload an empty folder, you create it on the server. When "uploading" a folder, if it already exists on the server, you either know that by requesting the listing beforehand and hence shouldn't have to attempt creating it, or you try to create it anyway and detect that it already exists because you fail to create it. Either way, that's not an error and it shouldn't be listed as a failed transfer. The only case where a folder should be listed as a failed transfer is if you fail to create it on the server but it does not already exist. Additionally:

• the "reason" column says "Creating directory". That makes no sense either. You are saying that you failed to upload a directory because "creating directory".
• When I have failed transfers, usually what I do is: reset and requeue all, and then process the queue again. This results in the folders showing up again in failed transfers. So, it looks like there was some error creating the folders on the server and that errors keeps happening and cannot be fixed. And none of that is true: there is no error to begin with, the folders simply already exist.

Note that if the folders contain files, none of this happens. All is uploaded as expected and nothing is listed under failed transfers. As expected.

I'm setting priority as high because false errors are as bad as failing to detect real errors. If an error log of any kind is polluted with false positives that I have to ignore, I'll end up missing real errors.

I think this is a regression, I hadn't observed this until recently.

When speed limits are turned on the upload progress meter changes in jumps and spurts instead of progressing smoothly (but at a slower pace).

When speed limits are turned off it progresses as expected in the smallest increments being displayed.

Remote directory tree is no longer refreshing after installing the 3.51 update. 3.50 was working fine. After 3.51 refresh issue i tried to revert back to 3.50 but no longer had access to the 3.50.exe installer.

Next tried the latest beta 3.52.0-beta1, but getting same refresh issue.

Only resolve was to restart FZ, which causes extra work as I have to export active queued and successful transfers.

To reproduce: View > Directory comparison > Enable (or press Ctrl-O) Set focus to a directory that has differences and press Shift-Ctrl-A Note the number shown in the status of the pane: "Selected x directories".

Current result: The number of selected directories is actually the total number of directories shown.

Expected result: The number of selected directories should be those that differ and are selected and highlighted.

FileZilla Client:

Version: 3.51.0

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2020-10-20 Compiled with: x86_64-w64-mingw32-gcc (GCC) 8.3-win32 20190406 Compiler flags: -O2 -g -Wall -Wextra -pedantic -ffunction-sections -fdata-sections -Wno-cast-function-type

Linked against:

wxWidgets: 3.0.6 SQLite: 3.31.1 GnuTLS: 3.6.15

Operating system:

Name: Windows 10 (build 18363), 64-bit edition Version: 10.0 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi bmi2 adx lm

When you go to edit/clear privacy data, you can't wipe search history for files you are searching for on your local disk drive. I don't think it should come up at all and should be private by default. Is there a way to exit Filezilla without worrying about search terms? I hope this problem will be fixed in future releases.

I always do file searches with the binoculars icon on the top right.

Please ask for more information if needed. Thank you.

Clean install of Windows 10 Pro, Clean install of Filezilla Client 3.52.0.3 From clicking on the Icon until the Filezilla window is displayed takes around 45 seconds. Once in Filezilla speed is no longer an issue, the programme works fine.

I have set up for logging and set the debug level to 3, but after start it has reset to Level 1 and no log file has been created.

Hi, Usually I have no problem but this week and last week it didn't provide my supples list from mckesson. it used give me the option of View/Edit form. I cant even get this weeks supplies. How do you get old files as well.

Status: Connecting to hssftp.azdhs.gov... Error: fzsftp could not be started Error: Could not connect to server Status: Waiting to retry... Status: Connecting to hssftp.azdhs.gov... Error: fzsftp could not be started Error: Could not connect to server

Neue Version 3.52.0.5 installiert. Seitdem übernimmt Filezilla nicht mehr das Datum beim Herunterladen der Datei (obwohl Haken bei "Änderungszeitpunkt der übertragenen Dateien beibehalten" aktiviert ist in Übertragungen).

function 'preserve timestamps of transferred files' can't work on SFTP protocol.

Please check, thanks.

Hi, FileZilla Team.

i use FileZilla to copy Big Files from Linux server to my notebook when i copy this Big Files, FileZilla delay Hours. but i can't see time when finished or disconnected. can you add time for activities on status activities window ?

thanks

Upon completion of a transfer, disconnects from server / fails to connect. I have to close and reopen filezilla. only since last update done yesterday 01/15/2021

I've got stuck in connecting to the server in the site manager option. I encountered a much smaller message box with no button in it. See the reproduce part for a detail description.

I'm sorry about that the bug only reproduce in language ZH_CN. However, as it's easy to see what the problem is without any knowledge in Chinese, the developer can easily fix it.

What is the environment? FileZilla Client

Version: 3.52.2

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2021-01-18 Compiled with: x86_64-w64-mingw32-gcc (GCC) 8.3-win32 20190406 Compiler flags: -O2 -g -Wall -Wextra -pedantic -ffunction-sections -fdata-sections -Wno-cast-function-type

Linked against:

wxWidgets: 3.0.6 SQLite: 3.31.1 GnuTLS: 3.6.15

Operating system:

Name: Windows 10 (build 19042), 64-bit edition Version: 10.0 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi bmi2 adx lm Settings dir: C:\Users\*\AppData\Roaming\FileZilla\

How to reproduce this bug? First, you need to move your personal configuration (Default at C:\Users\*\AppData\Roaming\FileZilla\) of FileZilla Client to some where else. Second, open the FileZilla Client in the simplified Chinese and open the site manager(站点管理器). Use the sftp protocol, and fill in the Host and Port. Choose the Normal(正常) Logon type, fill in the user name and password. Finally, Press Connect(连接).

What should be shown? A normal Message Box to ask me whether to save my password in the FileZilla Client.

What did you see instead? A much smaller Message Box. There is no confirm or cancel button on the Message Box which makes me get stuck in connecting to the server. And you can see it in the attached picture.

Add 'Keywords' entry to 'data/filezilla.desktop' file. Fixes a lintian warning under Debian.

Patch attached.

Note: Add, remove or modify keywords as you see fit. It is the mere fact of having a 'Keywords' entry that fixes the lintian warning.

Hi,

it seems that v3.52.0.5 is unable to move (rename) a file when a file with same name exists in the destination directory. This is the error:

Error: mv /source/directory/TESTFILE /destination/directory/TESTFILE: received failure with description 'Failure'

TESTFILE is an empty text file; /destination/directory already contained a file named TESTFILE.

Trying the same operation with sftp CLI (rename /source/directory/TESTFILE /destination/directory/TESTFILE) the operation succeeds.

Optimal would be asking whether overwrite or not, which neither the sftp command does; 'Failure' looks like a bug to me.

Thanks!

Hi,

There is a security issue in putty CVE-2020-14002 that I think is not yet fixed in filezilla bundled one. This was fixed upstream in putty 0.74:

​https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-14002 ​https://www.chiark.greenend.org.uk/~sgtatham/putty/changes.html

Is it possible to fix this security issue?

Regards, David

Could not connect to server

The login type is set to interactive (for two factor authentication). The maximum number of connections under transfer settings is set to 1. Despite that, FileZilla opens 3 connections when I drag and drop a directory to download it. This only happens in the Windows version, the Mac version is fine.

Log:

Status: Connecting to xxxxxx:2222... Status: Using username "yyyyyy". Status: Connected to xxxxxx Status: Retrieving directory listing... Status: Listing directory /home/yyyyyy Status: Directory listing of "/home/yyyyyy" successful Status: Retrieving directory listing of "/home/yyyyyy/test"... Status: Listing directory /home/yyyyyy/test Status: Directory listing of "/home/yyyyyy/test" successful Status: Retrieving directory listing of "/home/yyyyyy/test"... Status: Directory listing of "/home/yyyyyy/test" successful Status: Connecting to xxxxxx:2222... Status: Connecting to xxxxxx:2222... Status: Retrieving directory listing of "/home/yyyyyy/test"... Status: Listing directory /home/yyyyyy/test Status: Directory listing of "/home/yyyyyy/test" successful Status: Using username "yyyyyy". Status: Using username "yyyyyy". Status: Connected to xxxxxx Status: Starting download of /home/yyyyyy/test/file0 Status: File transfer successful, transferred 104,857,600 bytes in 1 second Status: Starting download of /home/yyyyyy/test/file6 Status: File transfer successful, transferred 104,857,600 bytes in 1 second Status: Starting download of /home/yyyyyy/test/file2 Status: Connected to xxxxxx Status: Starting download of /home/yyyyyy/test/file3 Status: File transfer successful, transferred 104,857,600 bytes in 1 second Status: Starting download of /home/yyyyyy/test/file7 Status: File transfer successful, transferred 104,857,600 bytes in 2 seconds Status: Starting download of /home/yyyyyy/test/file1 Status: File transfer successful, transferred 104,857,600 bytes in 2 seconds Status: Starting download of /home/yyyyyy/test/file4 Status: File transfer successful, transferred 104,857,600 bytes in 2 seconds Status: Starting download of /home/yyyyyy/test/file5 Status: File transfer successful, transferred 104,857,600 bytes in 8 seconds Status: Starting download of /home/yyyyyy/test/file9 Status: File transfer successful, transferred 104,857,600 bytes in 2 seconds Status: Starting download of /home/yyyyyy/test/file8 Status: File transfer successful, transferred 104,857,600 bytes in 2 seconds Status: File transfer successful, transferred 104,857,600 bytes in 3 seconds Status: Disconnected from server Status: Disconnected from server Status: Disconnected from server

If Remote Folder is filled with an erroneous one, FileZilla crashes.

Expected behaviour: Display a "Non existing folder" warning

Steps to reproduce it:

1. Open FileZilla
2. Connect to a Linux remote host
3. Write c:\ in Remote Folder and press Enter

The Windows Event log traced it:

• <EventData> <Data>filezilla.exe</Data> <Data>3.52.2.0</Data> <Data>00000000</Data> <Data>libfzclient-private-3-52-2.dll</Data> <Data>0.0.0.0</Data> <Data>00000000</Data> <Data>40000015</Data> <Data>0000000000003216</Data> <Data>4704</Data> <Data>01d6fcb6322ca5ea</Data> <Data>C:\Program Files\FileZilla FTP Client\filezilla.exe</Data> <Data>C:\Program Files\FileZilla FTP Client\libfzclient-private-3-52-2.dll</Data> <Data>ed27ca11-d631-450a-a301-ff8a3d26aeb3</Data> <Data /> <Data /> </EventData>

Hi,

example:

user@host:/volume/one$ ls -l *ide* lrwxrwxrwx 1 user group 98 Feb 10 09:16 image.ide.ova -> /volume/two/image.ide.ova

when downloading this "file" the progress indicator does immediately jumps to "> 100.0%" and "00:00:00 left" for the rest of the download.

I think this is because the base of this calculation is based on the 'stat' of the symlink instead of doing a 'stat' on the actual file before downloading.

Regards

Ulf

One thing that seems to be missing (correct me if I'm wrong) is the ability to add a file to the queue by providing a path string (I can see you can add files that are showing within Filezilla or drag files in from Explorer)

A scenario would be when you have explorer in one virtual desktop and filezilla in another; because you can't drag between virtual desktops (I've suggested the idea to MS...) it would be ideal to be able to pick up the file name path, switch desktops, and add it to the queue (Main menu item, or right-click in a remote pane). Another scenario is when the file is listed in another application (eg a database) and you can copy its text path.

Since it would just pop up a simple dialog box you can paste the path in I would expect it would be easy to implement. I can see there's a slightly related ticket at ​https://trac.filezilla-project.org/ticket/2666 which I can certainly see the logic of. Cheers, David

The bookmarks list ("Bookmarks" on the main menu) is not sorted automatically when a new bookmark is added. (this behavior is not new to the current version; it existed for a long time)

When new bookmarks are added, they always go to the top of the bookmarks list and stay there. Bookmark sort order is not corrected, until one does some bookmark management ("Manage Bookmarks"), like the deletion of an existing bookmark. Only then gets the list sorted correctly (alphabetical). Otherwise all recently added bokmarks stay on the top of the list, regardless of their names.

If a dir contains many (thousands of) files, the deletion process is interrupted after around 1000 files.

Logs (shortened):

2021-03-02 11:00:29 7068 2 Status: Sende Verbindungserhaltungs-Befehl
2021-03-02 11:00:29 7068 2 Befehl: TYPE I
2021-03-02 11:00:29 7068 2 Antwort: 200 Type set to I
2021-03-02 11:00:52 7068 2 Status: Empfange Verzeichnisinhalt für "/xx.de/cache4"...
2021-03-02 11:00:52 7068 2 Befehl: CWD cache4
2021-03-02 11:00:52 7068 2 Antwort: 250 CWD command successful
2021-03-02 11:00:52 7068 2 Befehl: PWD
2021-03-02 11:00:52 7068 2 Antwort: 257 "/xx.de/cache4" is the current directory
2021-03-02 11:00:52 7068 2 Befehl: PASV
2021-03-02 11:00:52 7068 2 Antwort: 227 Entering Passive Mode (xx,xx,xx,xx,xx,xx).
2021-03-02 11:00:52 7068 2 Befehl: MLSD
2021-03-02 11:00:52 7068 2 Antwort: 150 Opening BINARY mode data connection for MLSD
2021-03-02 11:00:52 7068 2 Antwort: 226 Transfer complete
2021-03-02 11:00:52 7068 2 Status: Anzeigen des Verzeichnisinhalts für "/xx.de/cache4" abgeschlossen
2021-03-02 11:00:52 7068 2 Status: Empfange Verzeichnisinhalt für "/xx.de/cache4/firewall"...
2021-03-02 11:00:52 7068 2 Befehl: CWD firewall
2021-03-02 11:00:52 7068 2 Antwort: 250 CWD command successful
2021-03-02 11:00:52 7068 2 Befehl: PWD
2021-03-02 11:00:52 7068 2 Antwort: 257 "/xx.de/cache4/firewall" is the current directory
2021-03-02 11:00:52 7068 2 Befehl: PASV
2021-03-02 11:00:52 7068 2 Antwort: 227 Entering Passive Mode (xx,xx,xx,xx,xx,xx).
2021-03-02 11:00:52 7068 2 Befehl: MLSD
2021-03-02 11:00:52 7068 2 Antwort: 150 Opening BINARY mode data connection for MLSD
2021-03-02 11:00:53 7068 2 Antwort: 226 Transfer complete
2021-03-02 11:00:53 7068 2 Status: Anzeigen des Verzeichnisinhalts für "/xx.de/cache4/firewall" abgeschlossen
2021-03-02 11:00:53 7068 2 Status: Lösche 3440 Dateien aus "/xx.de/cache4/firewall"
2021-03-02 11:00:53 7068 2 Befehl: DELE 56.txt
2021-03-02 11:00:53 7068 2 Antwort: 250 DELE command successful
... around 1000 files get deleted
2021-03-02 11:01:21 7068 2 Befehl: DELE 159.txt
2021-03-02 11:01:21 7068 2 Antwort: 250 DELE command successful
2021-03-02 11:01:21 7068 2 Befehl: DELE 40.txt
2021-03-02 11:01:21 7068 2 Fehler: Verbindung zum Server getrennt: ECONNABORTED - Verbindung abgebrochen
2021-03-02 11:01:23 7068 2 Status: Verbindung zum Server getrennt
2021-03-02 11:01:23 7068 2 Status: Auflösen der IP-Adresse für xx.xx.com
2021-03-02 11:01:23 7068 2 Status: Verbinde mit xx.xx.xx.xx:21...
2021-03-02 11:01:23 7068 2 Status: Verbindung hergestellt, warte auf Willkommensnachricht...
2021-03-02 11:01:23 7068 2 Antwort: 220 FTP on xx.xx.com ready
2021-03-02 11:01:23 7068 2 Befehl: AUTH TLS
2021-03-02 11:01:23 7068 2 Antwort: 234 AUTH TLS successful
2021-03-02 11:01:23 7068 2 Status: Initialisiere TLS...
2021-03-02 11:01:23 7068 2 Status: Überprüfe Zertifikat...
2021-03-02 11:01:23 7068 2 Status: TLS-Verbindung hergestellt.
2021-03-02 11:01:23 7068 2 Befehl: USER xx
2021-03-02 11:01:23 7068 2 Antwort: 331 Password required for xx
2021-03-02 11:01:23 7068 2 Befehl: PASS ****************
2021-03-02 11:01:23 7068 2 Antwort: 230 User xx logged in
2021-03-02 11:01:23 7068 2 Befehl: CLNT FileZilla
2021-03-02 11:01:23 7068 2 Antwort: 200 OK
2021-03-02 11:01:23 7068 2 Befehl: OPTS UTF8 ON
2021-03-02 11:01:23 7068 2 Antwort: 200 UTF8 set to on
2021-03-02 11:01:23 7068 2 Befehl: PBSZ 0
2021-03-02 11:01:23 7068 2 Antwort: 200 PBSZ 0 successful
2021-03-02 11:01:23 7068 2 Befehl: PROT P
2021-03-02 11:01:23 7068 2 Antwort: 200 Protection set to Private
2021-03-02 11:01:23 7068 2 Status: Angemeldet
2021-03-02 11:01:23 7068 2 Status: Lösche 3440 Dateien aus "/xx.de/cache4/firewall"
2021-03-02 11:01:23 7068 2 Befehl: CWD /xx.de/cache4/firewall
2021-03-02 11:01:23 7068 2 Antwort: 250 CWD command successful
2021-03-02 11:01:23 7068 2 Befehl: PWD
2021-03-02 11:01:23 7068 2 Antwort: 257 "/xx.de/cache4/firewall" is the current directory
2021-03-02 11:01:23 7068 2 Befehl: DELE 560.txt
2021-03-02 11:01:23 7068 2 Antwort: 550 560.txt: Datei oder Verzeichnis nicht gefunden
... around 1000 files are "not found"
2021-03-02 11:01:40 7068 2 Befehl: DELE 247.txt
2021-03-02 11:01:40 7068 2 Antwort: 550 247.txt: Datei oder Verzeichnis nicht gefunden
2021-03-02 11:01:40 7068 2 Befehl: DELE 197.txt
2021-03-02 11:01:40 7068 2 Fehler: Verbindung zum Server getrennt: ECONNABORTED - Verbindung abgebrochen
2021-03-02 11:01:42 7068 2 Status: Auflösen der IP-Adresse für xx.xx.com
2021-03-02 11:01:42 7068 2 Status: Verbinde mit xx.xx.xx.xx:21...
2021-03-02 11:01:42 7068 2 Status: Verbindung hergestellt, warte auf Willkommensnachricht...
2021-03-02 11:01:42 7068 2 Antwort: 220 FTP on xx.xx.com ready
2021-03-02 11:01:42 7068 2 Befehl: AUTH TLS
2021-03-02 11:01:42 7068 2 Antwort: 234 AUTH TLS successful
2021-03-02 11:01:42 7068 2 Status: Initialisiere TLS...
2021-03-02 11:01:42 7068 2 Status: Überprüfe Zertifikat...
2021-03-02 11:01:42 7068 2 Status: TLS-Verbindung hergestellt.
2021-03-02 11:01:42 7068 2 Befehl: USER xx
2021-03-02 11:01:42 7068 2 Antwort: 331 Password required for xx
2021-03-02 11:01:42 7068 2 Befehl: PASS ****************
2021-03-02 11:01:42 7068 2 Antwort: 230 User xx logged in
2021-03-02 11:01:42 7068 2 Befehl: CLNT FileZilla
2021-03-02 11:01:42 7068 2 Antwort: 200 OK
2021-03-02 11:01:42 7068 2 Befehl: OPTS UTF8 ON
2021-03-02 11:01:42 7068 2 Antwort: 200 UTF8 set to on
2021-03-02 11:01:42 7068 2 Befehl: PBSZ 0
2021-03-02 11:01:42 7068 2 Antwort: 200 PBSZ 0 successful
2021-03-02 11:01:42 7068 2 Befehl: PROT P
2021-03-02 11:01:42 7068 2 Antwort: 200 Protection set to Private
2021-03-02 11:01:42 7068 2 Status: Angemeldet
2021-03-02 11:01:42 7068 2 Befehl: CWD /xx.de/cache4
2021-03-02 11:01:42 7068 2 Antwort: 250 CWD command successful
2021-03-02 11:01:42 7068 2 Befehl: PWD
2021-03-02 11:01:42 7068 2 Antwort: 257 "/xx.de/cache4" is the current directory
2021-03-02 11:01:42 7068 2 Befehl: RMD firewall
2021-03-02 11:01:42 7068 2 Antwort: 550 firewall: Das Verzeichnis ist nicht leer
2021-03-02 11:01:42 7068 2 Befehl: CWD /xx.de
2021-03-02 11:01:42 7068 2 Antwort: 250 CWD command successful
2021-03-02 11:01:42 7068 2 Befehl: RMD cache4
2021-03-02 11:01:42 7068 2 Antwort: 550 cache4: Das Verzeichnis ist nicht leer
2021-03-02 11:01:42 7068 2 Status: Empfange Verzeichnisinhalt für "/xx.de"...
2021-03-02 11:01:42 7068 2 Befehl: TYPE I
2021-03-02 11:01:42 7068 2 Antwort: 200 Type set to I
2021-03-02 11:01:42 7068 2 Befehl: PASV
2021-03-02 11:01:42 7068 2 Antwort: 227 Entering Passive Mode (xx,xx,xx,xx,xx,xx).
2021-03-02 11:01:42 7068 2 Befehl: MLSD
2021-03-02 11:01:42 7068 2 Antwort: 150 Opening BINARY mode data connection for MLSD
2021-03-02 11:01:42 7068 2 Antwort: 226 Transfer complete
2021-03-02 11:01:42 7068 2 Status: Anzeigen des Verzeichnisinhalts für "/xx.de" abgeschlossen

Similarly to already closed #8305 the process does not terminate anymore. I am unsure, but I think this started happening after some Windows update. I had an earlier version of FileZilla (did not write down which one, sadly), then updated and the issue was not solved. It's easy to replicate for me: just start the app, close it with "X" and see that the process is still hanging in Task Manager and even eats 8-10% of CPU. Furthermore, if I change any settings, they do not get saved: after killing the process and opening the app again, settings revert back. Issue persists both when running as admin and as a regular user.

I can't manage to log in with Filezilla Pro with the same credentials I use for Android (Solid Explorer, webdav) and used for AirExplorer (Windows 10, webdav). Provider Ziggo. With webdav Android and AirExplorer I get (got) a connection, I see the folder structure and can navigate through it.. With Filezilla Pro I do not get a connection at all: Error: Too many redirections Error: Failed to receive folder list I have tried everything, no result.

A part of the log: ........ ........ Opdracht: Authorization: Opdracht: Connection: keep-alive Opdracht: Content-Length: 0 Opdracht: Depth: 1 Opdracht: Host: mail.ziggo.nl:443 Opdracht: Keep-Alive: 300 Opdracht: User-Agent: FileZilla/3.52.2 Antwoord: HTTP/1.0 301 Moved Permanently Antwoord: Location: ​https://mail.ziggo.nl/servlet/webdav.infostore/ Antwoord: Server: BigIP Antwoord: Connection: Keep-Alive Antwoord: Content-Length: 0 Opdracht: PROPFIND /servlet/webdav.infostore/ HTTP/1.1 Opdracht: Authorization: Opdracht: Connection: keep-alive Opdracht: Content-Length: 0 Opdracht: Depth: 1 Opdracht: Host: mail.ziggo.nl:443 Opdracht: Keep-Alive: 300 Opdracht: User-Agent: FileZilla/3.52.2 Antwoord: HTTP/1.0 301 Moved Permanently Antwoord: Location: ​https://mail.ziggo.nl/servlet/webdav.infostore/ Antwoord: Server: BigIP Antwoord: Connection: Keep-Alive Antwoord: Content-Length: 0 Fout: Te veel omleidingen Fout: Ontvangen van mappenlijst is mislukt

FileZilla Client

Version: 3.53.1

Build information:

Compiled for: x86_64-apple-darwin20.3.0 Compiled on: x86_64-apple-darwin20.3.0 Build date: 2021-03-22 Compiled with: Apple clang version 12.0.0 (clang-1200.0.32.29) Compiler flags: -O2 -g -Wall -Wextra -pedantic -O2 -g -Wall -Wextra -pedantic -Werror=partial-availability

Linked against:

wxWidgets: 3.0.6 SQLite: 3.31.1 GnuTLS: 3.6.15

Operating system:

Name: Mac OS X (Darwin 19.6.0 x86_64) Version: 10.15 CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi bmi2 adx lm Settings dir: /Users/mihai/.config/filezilla/

### STEPS TO REPRODUCE ###

1. open a remote site
2. right click on a file
3. select File permissions
4. click inside 'Numeric value' input
5. type any number (eg: 777)

Result - application crashes

I love filezilla but have been forced to use the slower WinSCP for 1 reason and 1 reason only, I am paranoid about holding down my mouse for too long when navigating to a directory and accidentally moving a directory, imagine the consequences of moving your entire home folder to root etc. I am asking that you please add the option of having a simple prompt "do you want to move dir1 into dir2?" YES/NO. Thank you for reading

. I just updated to 3.53.1 (newest version), and now I can't download the larger files at all, error message "error while reading: received a short buffer from FXP_READ, but not at EOF".

Hi

I am trying to connect to external sftp server which doesn't require ssh key for login. External server only requires host, Port number, User and password for login. But each time during connecting to any external sFTP server, by default FileZilla is looking for ssh key credentials for login and get a connection error. And for specifically the external host connection which require ssh public key authentication, that is also giving " connection error" on my personal Mac laptop. But, the Filezilla external sFTP connection works fine, if I use another laptop or desktop.

Response: fzSftp started, protocol_version=10 Command: proxy 2 "localhost" 2222 Command: keyfile "/MAC_Public_Key/.ssh/MAC_public_key.ppk" Command: open "any@…" 22 Error: FATAL ERROR: Connection refused Error: Could not connect to server

Would be good if there werean option in FZ to hide the full FTP connection URL from tabs, to save space.

Since connection profiles have names anyway ("my site") this is sufficient information to display in the tab, not the profile name PLUS the whole connection URL, which means tabs are wider than they need be. In other words:

When a server sends a keyboard-interactive authentication info request (SSH_MSG_USERAUTH_INFO_REQUEST) with zero prompts, the user is not presented with the instructions field.

We are attempting to use the instructions field to convey the OAuth2 Device Flow instructions field in ContainerSSH:

Please click the following link: https://github.com/login/device

Enter the following code: CODE HERE

The server waits with sending the SSH_MSG_USERAUTH_SUCCESS until the user has completed the OAuth2 device flow.

Thank you for your help.

Hi guys, We’ve been having trouble dragging our PDFs into FileZilla for a number of weeks now. When we drag the PDFs in, FileZilla either closes altogether or they all go into the “unsuccessful transfers” folder. The only way to get around this is to delete the app, reboot our computers and re download/re open. What’s happening? Please can you look into this for us. Thanks, Evan

This is right after upgrading to the latest update.

FileZilla Client

Version: 3.53.1

Build information:

Compiled for: x86_64-w64-mingw32 Compiled on: x86_64-pc-linux-gnu Build date: 2021-03-22 Compiled with: x86_64-w64-mingw32-gcc (GCC) 8.3-win32 20190406 Compiler flags: -O2 -g -Wall -Wextra -pedantic -ffunction-sections -fdata-sections -Wno-cast-function-type

Linked against:

wxWidgets: 3.0.6 SQLite: 3.31.1 GnuTLS: 3.6.15

Operating system:

Name: Windows 10 (build 18362), 64-bit edition Version: 10.0 Platform: 64-bit system CPU features: sse sse2 sse3 ssse3 sse4.1 sse4.2 avx avx2 aes pclmulqdq rdrnd bmi bmi2 adx lm