Custom Query (2164 matches)

I sucessfully transfered more than 100'000 files from an archive to local. The log pannel of sucessful transfers contains the 100'000 names of files. I select all the log by ctrl-a and press the del key.

It takes about 5 minutes to clear the list - a huge time.

Observation: at the beginning of the freeing, memory is released by 5ko/interval (monitoring the processes), than by 24 ko/interval and finally at 200ko/interval. I bet that the algorithm used fro freeing the list and memory is not optimal.

The same "long time" was observed at least 3 times and is always present.

When the list is "short", the time is short - a few seconds or so. Is a much faster ?

I tried to stop both the files' downloading and the exploration of the tree (huge, more than 8 minutes) of the distant site using a ctrl-p. It effectively stopped the downloading of files, but not the tree exploration.

Is there a facility to stop the tree exploration from the distant site ?

I was hoping that this could be implemented. I see that tateu updated 3.5.3 but it doesn't work for the latest 3.6.0.2 version. Can someone create a patch please?

It would be very helpful. Thanks in advance.

​http://forum.filezilla-project.org/viewtopic.php?f=3&t=13341&sid=cdf9d15feff72c2f81bc68a5e827ab4d&start=15

Subject pretty much says it all. I have an active file transfer, and then I go to Edit -> Settings and pick a new Theme, and then hit OK.

I am returned to the main window, but the "Process Queue" toggle button has lost its state and appears in the "off" position (not-pressed).

I only had a single file in the queue and it was already in progress, so I'm not sure if this was simply cosmetic (the rest of the queue would've completed) or if the Process Queue setting actually got frobbed.

Client details below.

FileZilla Client

Version: 3.6.0.2

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2012-11-29 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 3.1.4 SQLite: 3.7.6.2

Operating system:

Name: Windows NT 6.1 (build 7601, Service Pack 1) Version: 6.1 Platform: 64 bit system

Hi,

Thanks for FileZilla client - great software; I just made a donation.

When editing a file, my workflow is like this: 1) Edit file 2) Switch to FileZilla to upload 3) Switch to browser to test impact 4) Switch back to editor

If FileZilla's "Do you want to upload this file?" box had a "Always upload this file" checkbox that could last for the session's duration, then that would be great and save some time.

Thank you for considering the idea.

On any other Mac program, the entire grey title/toolbar can be clicked and dragged. In FileZilla, only the very top portion works as it should. This often leads to the cursor arrow sliding off and moving something in the window below.

CONDITIONS: Create 2 folders, e.g. TEST1 and TEST2. Use directory tree pane to drag TEST2 onto the TEST1 folder. As when trying to move a folder inside another folder. Although the folder TEST2 is successfully moved to TEST1 using this approach, the TEST2 folder's icon will still remain where it was. Resulting in seemingly 2 TEST2 folders. (please reference the submitted image).

When this happens, slicking 'Refresh' will not help as long as the original TEST2 folder icon is highlighted.

Right now, it's nice that you can put FTP URLs in the quickconnect bar, but the functionality isn't quite usable.

For example, if you copy ​ftp://190.144.167.33/planificacion/VAD&Hepp/Metodo-participativo-VAD.pdf from your browser and you want to download it in filezilla. When you paste it in the quick connect "host" field, you get the following error:

Connecting to 190.144.167.33:21... Status: Connection established, waiting for welcome message... Response: 220-Microsoft FTP Service Status: Connected Status: Retrieving directory listing... Command: CWD /planificacion/VAD&Hepp/Metodo-participativo-VAD.pdf Response: 550 /planificacion/VAD&Hepp/Metodo-participativo-VAD.pdf: The directory name is invalid. Command: PWD Response: 257 "/" is current directory.

Ideally, it would CDW TO /planificacion/VAD&Hepp/ then start a download of Metodo-participativo-VAD.pdf

Version: 3.6.0.2 OS: Windows 7 x64

I have a LOT of certificate-authenticated SFTP sites; since I went over 10, I began getting this error:

Status: Connecting to devstbe1... Response: fzSftp started Command: keyfile "
tsclient\C\Users\hwilkins\Documents\Work Documents\projects\0 I02218 ST Upgrade\SFT\certificates\test1_password1234.ppk" Command: keyfile "
tsclient\C\Users\hwilkins\Documents\Work Documents\projects\0 I02218 ST Upgrade\SFT\certificates\devccm\ccm.ppk" Command: keyfile "
tsclient\C\Users\hwilkins\Documents\Work Documents\projects\0 I02218 ST Upgrade\SFT\certificates\ccm\ccm.ppk" Command: keyfile "
tsclient\C\Users\hwilkins\Documents\Work Documents\projects\0 I02218 ST Upgrade\SFT\certificates\hoh\wellsfargo.ppk" Command: keyfile "
tsclient\C\Users\hwilkins\Documents\Work Documents\projects\0 I02218 ST Upgrade\SFT\certificates\ccm\sterling.ppk" Command: keyfile "
tsclient\C\Users\hwilkins\Documents\Work Documents\projects\0 I02218 ST Upgrade\SFT\certificates\mytestuser\mytestuser1.ppk" Command: keyfile "
tsclient\C\Users\hwilkins\Documents\Work Documents\projects\0 I02218 ST Upgrade\SFT\certificates\mytestuser\mytestuser2.ppk" Command: keyfile "
tsclient\C\Users\hwilkins\Documents\Work Documents\projects\0 I02218 ST Upgrade\SFT\certificates\cie\cie.ppk" Command: keyfile "
tsclient\C\Users\hwilkins\Documents\Work Documents\projects\0 I02218 ST Upgrade\SFT\certificates\fisglobal\dataexpress.ppk" Command: keyfile "
tsclient\C\Users\hwilkins\Documents\Work Documents\projects\0 I02218 ST Upgrade\SFT\certificates\testcertlogin\testcertlogin1.ppk" Command: keyfile "
tsclient\C\Users\hwilkins\Documents\Work Documents\projects\0 I02218 ST Upgrade\SFT\certificates\testcertlogin\testcertlogin2.ppk" Command: open "testcertlogin2@devstbe1" 22 Error: Server sent disconnect message Error: type 14 (no more auth methods available): Error: "Too many publickey verification attempts were made." Error: Could not connect to server

Shouldn't FileZilla only try the key file reflecting the login name instead of trying them all?

FileZilla does not appear to support client-certificate auth (no password) mode. Examples where this does work via cURL include:

curl -v -k --ftp-ssl --ftp-pasv --disable-epsv --key userkey.pem --cert usercert.pem ​ftp://user@server

curl -v -k --tlsv1 --ssl --ssl-reqd --ftp-alternative-to-user "SITE AUTH" --disable-epsv --ftp-skip-pasv-ip --key userkey.pem --cert usercert.pem ​ftp://server

I can provide output and trace logs if desired, but since the traces show certificate detail, I'd prefer not to do it in public.

RFC 2228 specifically states that the server can accept AUTH info as sufficient for login, and provides FTP response codes for doing so, bypassing the PASSWORD prompt.

The ability to specify a certificate for a particular connection profile would help here, keeping the connection from trying the wrong certificate (this would also help SFTP connections avoide the error noted in bug report 8476 (​http://trac.filezilla-project.org/ticket/8476)

Please add a checkbox to this dialog that causes the dialog to remember what you did last time. I frequently use FileZilla to just look at files that are changing at the remote site so every time I want to refresh I have to select "Discard local file...".

You get the idea.

As an alternative to this change make view and edit two different functions.

Here are the "info" dump:

FileZilla Client

Version: 3.6.0.2

Build information:

Compiled for: i686-apple-darwin9 Compiled on: i386-apple-darwin9.8.0 Build date: 2012-11-29 Compiled with: i686-apple-darwin9-gcc-4.2.1 (GCC) 4.2.1 (Apple Inc. build 5577) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 3.1.3 SQLite: 3.7.6.2

Operating system:

Name: Mac OS X (Darwin 10.8.0 i386) Version: 16.104

With recent versions of FileZilla, we have been seeing a number of incomplete file transfers. Here are our steps to reproduce:

1) Connect to the FTP server (on Windows CE device). (No encryption, anonymous FTP). 2) Transfer a file of size > 1MB from client to server. 3) Often the file transfer will "complete" after only ~200kB have been transferred. Sometimes a client PC will get stuck in this state, unable to transfer larger files. 4) The file remains on the server with a size of ~200kB.

The reason why I suspect FileZilla is the culprit is because other FTP clients (such as Microsoft command line ftp client and Windows Explorer) work OK from the same machines that have trouble with FileZilla.

Furthermore, I once took a Wireshark capture during the transfer and it seemed evident that FileZilla was dropping the ball on the communications.

This seems to happen with 3.6.0.2 but not with 3.6.0. However, I am not certain of that.

Thank you for your assistance. Please let me know if there is more information I could provide that would be helpful in tracking down this bug.

Detailed version information below:

FileZilla Client

Version: 3.6.0.2

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2012-11-29 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 3.1.4 SQLite: 3.7.6.2

Operating system:

Name: Windows NT 6.1 (build 7601, Service Pack 1) Version: 6.1 Platform: 64 bit system

we have following issue

protocol: ftp encryption: Require explicit FTP over TLS Logon: normal our client have an internal ip 10.35..4 the destination address is the internal ip address from our firewall : 10.35..254 the real destination is an server outside: 172......

when the client open the connection to the ftp server: The ftp connection can be opened to the destination server!

But wenn the command "LIST" where send to the server, we don't get a sign from the real destination ftp server, because the protocol package has the wrong IP address information included into the package to the client. Maybe it wll be a bug?

when we use another software 4 example "smartftp", to do the same thing -> it works fine. We we want to use flezilla.

FileZilla is very slow ~5MB/s, ~90seconds when using sftp to upload a file to my local SSH file server only, while a Linux command-line "sftp" tool is much faster:

$ sftp sshserver@127.0.0.1 sftp> put Filename.tar Filename.tar 100% 379MB 20.0MB/s 00:19

I'm really wondering why this is.

While downloading some folders from my webspace with ftpes (explicit ftp over tls), I tried to rename another local folder in the left area in filezilla, where i can see my local folders.

I made a right-click/edit on it, and it turned editable. Then I clicked on it directly after its name (downloads|) because i wanted to rename it to "downloads-old".

When i start to type the first letter ("-"), the "edit-mode" disappeared/closed , and so it is impossible to rename this or another local folder.

I had to open a filemanager of gnome to rename the folder.

This problem exists only When downloads are active. Without any downloads, the renaming works without problem.

The 'Download-Mode', where the problem appeared, is: "overwrite if filesize is different or file is more actual". I use the german version of filezilla.

here my filezilla info: =============================================================== FileZilla Client

Version: 3.6.0.2

Build information:

Compiled for: x86_64-redhat-linux-gnu Compiled on: x86_64-redhat-linux-gnu Build date: 2012-12-06 Compiled with: gcc (GCC) 4.7.2 20121109 (Red Hat 4.7.2-8) Compiler flags: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -Wall -g -fexceptions -std=gnu++11

Linked against:

wxWidgets: 2.8.12 GnuTLS: 2.12.22 SQLite: 3.7.13

Operating system:

Name: Linux 3.7.7-201.fc18.x86_64 x86_64 Version: 3.7

======================================================== i can't test it with the nightly build because ​http://filezilla-project.org/nightly.php does only show a "nightly builds" - header, but no content or download-links, at the moment.

Hi, I'm uploading a file very slowly and I believe it is not counting the hour in the upload's elapsed time. Essentially this previous bug: ​http://trac.filezilla-project.org/ticket/5657 but as applied to uploads rather than downloads.

Steps to reproduce:

• navigate on the client side to a folder with a lot of files
• select all of them
• upload them

Expected:

• all the files should be added to the queue immediately

Observed:

• only a few are added to the queue, then after a while a few more are added, etc

I guess this is by design, but it is a completely wrong design that has no reason to be like this, and has huge drawbacks and no one single advantage. I understand why _downloads_ are added to the queue like this (though an option should be provided to queue _all_ files for download before starting to download them, if one wants to, because there are a number of situation when one needs to have a complete queue). But there is NO reason at all for uploads to work like this.

Here's an obvious case of a problem this generates:

• there is some network issue that interrupts the upload, or anything that forces you to restart filezilla

=> After restarting filezilla, the queue is remembered, but the files that were going to be added to the queue are not. So you are left with a partial queue that you can resume but you have absolutely no way to figure out which are the files that need to be re-added to the queue.

This is made worst by a bunch of other bugs that make filezilla go completely berserk and uncapable of recovering at the slightest network problem, so you are forced to restart it very, very often, facing this issue. However this issue is an issue of its own and must be fixed regardless of the other ones that make it worse (i.e. even if you were never forced to restart filezilla without a reason, because you can always have a good external reason to have to restart it, and also because the behavior is plain wrong in the first place).

When I download a file and then tab to the list view and down arrow to the time left, time remaining and other information list item, the NVDA screen reader just says list item, it will not read that information. Please fix this so NVDA reads all file transfer status information for downloads and uploads.

I renamed about 20 of the 48 .JPG files in the 'photos' directory in my PC mirror of my website. Instead of manually renaming them on the website, I created a new '@swap' sub-directory there, and dragged and dropped the files to be renamed to it. Then on the PC I selected all the files in the 'photos' directory and uploaded them to the website's 'photos' directory, responding to whether to skip overwriting the files that were not renamed with 'skip' and 'all'. It all worked fine.

Before that upload was quite completed, on both the PC and Website, I changed the window focus to another directory, my 'ph' directory in each window. The I tried to upload its '@…' file, but the file was not added to the queue. I tried changing the directory focuses in other ways and coming back to try again with no effect. I opened a new connection to the website and went to the 'ph' directories and it had no effect.

I closed and reopened FileZilla and went to the 'ph' directories and the file uploaded as usual, prompting me to overwrite the old one.

The version it occured on was: 3.5.3 then I installed current version: 3.6.0.2

I always miss this little detail. You must take the file and put it into the dir, one change an do it again. I will thank this little button that I would use to upload new version of a file that i'm editing, but i would do twice (up and down)

Actually you need to edit a file directly from ftp to do some like this. The idea is make it on local server files.

my two cents. thank you.

Figured this should be automatic.. appears to inquire about overwriting when first attempt to download fails (broken connection or incomplete transmission).

I would have expected this to be automatic on retries..

On the other hand, if it fails, I would expect it to ask to keep partial file or delete...

I'm experiencing a race condition when uploading. Approx. every 300 files, a file that's being uploaded already exists, and I'm prompted what to do. Typically the file has 0 bytes, sometimes it has <100% size. These files are from previously failed attempts in the same queue - NB that the target directory was empty before.

I'd expect FileZilla to retry failed uploads non-interactively. I'm using 8 concurrent transfers, and the remote server is "flaky" in that it likes to terminate connections randomly every once in a while.

So here's my hypothesis:

1) Thread A uploads file foo, is kicked off the server before upload completes. This leaves the file in the transfer queue (does it?). 2) Thread B finds foo in the transfer queue, tries to upload, and finds the incomplete file created by thread A in 1).

If this is true, the solution might be to do the collision handling cross-threads, i.e. B should know that A just failed to upload foo, and retry non-interactively.

I'm happy to set up a test account on this flaky server. The race is pretty easy to trigger by uploading, say, WordPress (maybe 2 or 3 times).

Also, and I assume this is related, there are files in the "Failed transfers" list. Shouldn't those be retried? (Should I open a new bug for the latter issue, in case it's not related? Or is it even a bug?)

Preconditions:

• Pref "Server -> Force show hidden files" is Off
• Remote server contains a directory structure with a hidden file
• User has adequate access rights to all relevant files and directories

Action:

Try to recursively delete the structure

What happens:

• The hidden file is not deleted
• Deleting the directory fails because its not empty

What should happen:

• Hidden file should be deleted regardless of the "Force show hidden files" setting
• Deleting the directory won't fail

Extra information:

• Server is running ProFTPd; tested with various versions.
• Everything works fine with the setting on.

Hi,

Here is my problem. When I do Directory Listing of an SFTP Server running ProFTPD 1.3.4b with mod_sftp 0.9.8, I see Filezilla Client 3.5.3 reporting me that there are some directories whose name are including their last writing date : "avril 8 14:48 <directory name>"

I checked the same server with Windows client version, Linux Client version : it's the same problem.

I checked with WinSCP client under Windows and all is OK. I checked with the last version of proftpd 1.3.4c and the problem still appear with FileZilla Client

I want to say that during last month, everything was OK with proftpd 1.3.4b/Mod_sftp 0.9.8 versions.

I checked sftp with openssh soft and everything is OK.

But, the difference I noticed is that with the same host, running directory listing under mod_sftp returns me a list of files whose date are in french (eg : 'avril' for the 4th month) whereas with openssh, the same directory listing returns me a list of files with a date in english (eg : Apr for the 4th month).

Can you confirm me that there is a FilleZilla issue ?

When connecting to a site using FTPS (SSL/TLS) the common name of the certificate is not checked against the server name. Although a warning is displayed that the certificate is untrusted it is not explicitly stated that the server named mismatches the CN.

This could be easily overlooked by unexperienced users.

Steps to reproduce:

In servermanager: config server A: serverA.domain.com (explicit TLS)

Setup an FTP Server serverA.domain.com presenting a certificate with a common name of "someotherserver.domain.com"

Connect to server A, a warning is displayed that the certificate is not trusted. The fact that "serverA.domain.com" and "someotherserver.domain.com" do not match is not explicitly stated.

As this is a strong indication of malicious activity, the user should be warned about it in an urgent manner.

Hi, I love filezila it’s the best. I running hundreds of sites using that software and it's the best.my quotations Is if it possible to have an "search option" inside the site manger windows So I will be able to quaky find web sites information instead spending minutes to find one site info in my 250 hundred web sites?

Regards yani

BUG REPORT BUG REPORT BUG REPORT

FILEZILLA 3.6.0.2 (MOST CURRENT VERSION) FOR MAC

KEYBOARD DELETE KEY IS WORTHLESS

MAC OS X 10.8.3

CAN NOT DELETE a file -- either remote or local USING DELETE KEY

Pressing the DELETE key simply JUMPS UP A LEVEL in the directory structure. Does NOT delete file.

( COMMAND DELETE DOES SAME AS DELETE -- FAILS )

Highlighting a file to delete and RIGHT clicking brings up a menu which has a DELETE selection. THAT WORKS and DELETES the file OK

IOW the KEYBOARD DELETE KEY IS WORTHLESS

Discovered as I migrate from Windows to Mac (that sorry Win8, no way Jose)

JOHN STONE JDSTONE@… 702.396.6545

Hello,

I'm not sure, if it's a bug or a feature. I searched a little bit for this, but found no other tickets on this:

When the directory-comparison mode is enabled, differences between host and server are displayed in three colours: green, yellow, red. But it seems, that the test on possible differences are made in the wrong order.

This is the actual behaviour of filezilla: if a file occurs on one side only, then the colour is yellow. else if a file differs in its age, then the colour is green. else if a file differs in file size, then the colour is red.

The result is, that files, which differ in file size _and_ age are displayed green, not red.

As the difference in age may be irrelevant (sometimes the timestamps are simply not correct on one side), but the difference in file size and hence the difference in content is relevant very much.

According to this, I would prefer, if the files with difference in age and file size are displayed in red, not green. The test on differences in file size should be made before the test on a different age.

I'm sorry, that no patch is attached, because I think it would be easy to change the described behaviour, but I don't have the time to do that by myself actually.

thanks for a great client,

Christoph Mühlmann

PS.: I'm using FileZilla 3.6.0.2 on Windows 7 x64

Hi,

there is a problem if I want to connect to a ftp server that ONLY supports active mode connections.

This is the FileZilla client output: 13:58:31 Status: Connecting to ftp-01.eurorscg.de through proxy 13:58:31 Status: Resolving address of proxy.oz.de 13:58:31 Status: Connecting to 10.1.224.211:1080... 13:58:31 Status: Connection with proxy established, performing handshake... 13:58:32 Status: Connection established, waiting for welcome message... 13:58:32 Response: 220 ftp-01.eurorscg.de X2 WS_FTP Server 7.5.1(64741463) 13:58:32 Command: USER username 13:58:32 Response: 331 Enter password 13:58:32 Command: PASS 13:58:32 Response: 230-User logged in 13:58:32 Response: Welcome to FTP Euro RSCG 13:58:32 Response: 230 User logged in 13:58:32 Status: Server does not support non-ASCII characters. 13:58:32 Status: Connected 13:58:32 Status: Retrieving directory listing... 13:58:32 Command: PWD 13:58:32 Response: 257 "/users/username" is current directory 13:58:32 Command: TYPE I 13:58:32 Response: 200 Transfer mode set to BINARY 13:58:32 Command: PASV 13:58:53 Error: Connection timed out 13:58:53 Error: Failed to retrieve directory listing

I have enabled Active-Mode in Transfer-Settings but FileZilla still sends the PASV command to the server to obtain the directory listing. That is where it stops. Since I don't have access to the server and can't change anything on the server side it would be nice if you can have a look at this issue. And the problem is not in my network configuration, because ws_ftp manages to connect to that server in active mode without any problems. I even can reproduce the problem with a simple linux ftp command line client outside of our firewall. As soon as I send the PASV command to the server, it stops responding. Without the PASV command, the connection works fine.

Greetings,

Uwe.

Hi, I am having trouble with imported settings not changing the Filezilla active settings.

I have altered the settings as needed and then created my export file, FileZilla.xml, which I can open and see has all the values that I changed. For example:

<Setting name="File exists action upload">6</Setting>

When I import the XML file in a new Filezilla client and restart, the settings are still set to their defaults. The program does not generate any errors, and does provide feedback that the task has completed: "The settings have imported successfully..." and "The selected categories have been imported."

If I look in $HOMEDIR\AppData\FileZilla\filezilla.xml, it still has the default setting:

<Setting name="File exists action upload">0</Setting>

Site manager entries are getting imported with no problem, but none of the settings are changing.

I've tried multiple times, restarting FileZilla each time after import, and it never shows the imported settings.

Below is the client version info, and I've attached the exported settings file I'm trying to import (I manually deleted the Last Server tag for privacy reasons).

FileZilla Client Info:

Version: 3.6.0.2

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2012-11-29 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 3.1.4 SQLite: 3.7.6.2

Operating system:

Name: Windows NT 6.1 (build 7601, Service Pack 1) Version: 6.1 Platform: 64 bit system

If you have a lot of entries plus bookmarks in your site manager list (which is always fully expanded), it needs some time to find the server you're searching for. Under the windows version of FileZilla, there is a drop-down-list in the button bar for a fast access.

It would be great, if such a kind of compact list can be included in the Mac version too.

Additional suggestion: Building the site list as a menu with server entries and expanding bookmarks as submenus: 1st level: Only the server entries; If the mouse hovers the server entry, than the additional bookmarks from this server appears as child-menu.

However, thanks for constantly improving FileZilla!

Example: displayed /Work/Êëèåíòû instead of /Work/Клиенты

Please, fix this little bug

Best regards, Anton

Transfer Settings > Limit number of simultaneous uploads.

If I set this to two, and begin the upload, only one upload begins.

If I then begin an additional upload to a different server, the second upload for the first server begins, and the second server is queued.

The second server being queued is fine and correct, but the first server should begin with the two uploads as I have set, and not just the one.

Hope that made some sense.

Filezilla works well with a Squid proxy using the basic authentication mechanism, but with the negotiate mechanism using a kerberos backend, it doesn't work at all.

It would be great to have this working, since it would allow to use Filezilla with our proxy server in a secure and convenient way.

Is it possible to implement kerberos authentication?

Every day I use FileZilla and it is common for me to open several tabs connecting to the same server/ftp account. On every new tab I have to manually navigate to the folder I am interested.

It would be a nice feature to add a "Duplicate tab" functionality, meaning open a new tab, connecting to the same server and open the same folder as the original tab.

Is it possible?

In the local file list box, the behavior is as expected: the list cursor stays at the same list position after renaming a file.

But in the remote list box, the list cursor moves to the first entry ("..") in the list after renaming a file. The user can press "Page down" and the cursor keys to navigate to the last position and rename the next file. Which is more annoying the more files you have to rename.

I use filezilla since several years now and this was ever an annoying issue. I thought "I can not be the only one and in one of the future updates this will be fixed for sure". But maybe the develpers are are not using filezilla often to rename remote files... ;)

Anyway, thank you for this otherwise great piece of software.

When setting a key file in the SFTP settings, closing the dialog, then deleting the key file from harddisk and connecting, Filezilla does not warn about the file being not accessible.

I still get:

Befehl: keyfile "Z:\foo.ppk" Befehl: open "user@…" 22

without any warning that foo.ppk does not exist.

Would it be possible to improve the update process? Currently (at least for the mac), updates are downloaded and require the user to manually extract and apply the update.

Ideally, I would like to see the process enhanced so that after the file is downloaded, the option to restart + install is provided to automatically apply the update.

Given the diverse user base for Filezilla, if this particular feature request conflicts with other user workflows, perhaps it could be implemented as an option within the application?

Since recently updating Filezilla, I now get this error when opening a html file to view? Filezilla use to open the file in a new tab in an open browser, but now after getting the error, it opens a brand new browser.

Taken from #2989:

I think it should be a menu like the "New" menu in Windows Explorer. And when the user clicks, for example, "New Text Document", FileZilla should create a new text document in the temporary directory and then upload it to the server.

All the other menu items should be also available:

1 - New Word document 2 - New Microsoft powerpoint etc.

That helps the user to create some customised template in Windows Explorer and use them in FileZilla. The user may want to create some templates like:

New HTML document New PHP file New Smarty template etc.

And he will be able to use these templates in FileZilla as well as Windows Explorer.

All this applies to KDE, GNOME and other graphical environments as well.

Feature request: Add shourtcuts for entries in the Servermanager to allow the users to jump directly to designated directories.

Something like that:

RE: Sorting of files or dirs is still in "old style" (pre-vista) format:

Client is still using a click column date sort based on pre-vista - (initial sort is old to new - new at bottom first). Please do the initial sort 'new to old'.

This was an annoyance in Windows for years (fixed in vista onward), and still a MAJOR annoyance in client.. why? Seems as simple change and a pretty logical follow-through to complement Vista/7/8/ explorer interfaces..

i regularly perform backups of all kinds of files with filezilla client and i use it a lot. actually, reliability has been an issue before. i even noticed files that were not entirely transfered. actually, i don't if this has been fixed by now. but back then i noticed, files were not fully transfered. so i went back and had to transfer it directory after directory to make it work.

and i've lost files before. but this time it's very critical. and i don't talk about the files. a website or application never runs if even one or two files are missing. but the loss this time is severe.

the trouble is, i can re-list "not transfered" files. but now filezilla ALWAYS says, not all files were put back in the transfer list. and i mean ALWAYS. every time i tried and try, i had this message and with different file formats. no matter if there were only 4 entries in the "not transfered" list, 40 or 400.

two days ago i started a major backup and after only a few thousand files and this message coming again and again i started checking and within a few thausand transfered files i've lost like 700 files!!! meaning even after like 1/6 of the backup i've lost more than 1000 files!!!

the entries just disappear from all lists. they don't go back to the transfer list and they are cleared in the "not transfered" list. it's not quite funny to backup lost files by hand. especially if there are hundreds or thousands. but that is not even possible when they are cleared in all lists! backing up some thousand files of different purpose and directories, you have no chance to find out the missing files. actually, today i tried to backup the most important files and again i've lost a lot of files. just now i re-listed 1772 files, 12 were in the list before and after re-listing i had 1756. meaning, 28 files are gone in only this one re-listing.

i didn't notice this trouble before and especially not to this extent. i'm using a german version and it says it's compiled on may 26th ... and it's says, version is 3.7.0.2. wxwidget 2.8.12, gnutls 3.1.11, sqlite 3.7.16.2, active transfer mode ... hope that's everything you need.

you should really try to get filezilla highly reliable. i barely have trouble with the application, but reliability has always been an issue. and this application is for "file transfer". so, i don't know about other people, but my data is always important. so is reliability. i like filezilla and i've been using it for years. reliability would be a good "feature" to add.

Hi

I am working under Windows Vista with filezilla client 3.7.0.2

I am extensively using the "Folder compare" feature of filezilla client and I am using the option to preserve timestamps when uploading files.

After uploading a file on the box, filezilla client still says that the files are not the same. The timestamp of file copied is the current timestamps only for files with eml extension.

I am connected to a remote linux box throught its sftp server

I've rename the file with txt extension and now it's good !!!

Thanks for looking into this

Regards,

Patrick (french user)

When I edit a file on my computer, which is listed in the client window and "save as" under a new file name, the new file does not show up in the listing. Currently I have to move up the directory tree and back down to the original directory for the new file to show up in the listing. It sure would be nice if creation of the new file would trigger an immediate update in the directory listing.

Thanks for what you do.

Using Windows 8 / Intel Core i5 running:

FileZilla Client

Version: 3.7.0.2

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2013-05-26 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 3.1.11 SQLite: 3.7.16.2

Operating system:

Name: Windows NT 6.2 (build 9200) Version: 6.2 Platform: 64 bit system

I tried to upload a file that has a space at the beginning of the name, for example: " 123.tif". The application starts uploading it but after reaching the 100% it returns to 0 automatically and upload the file again. I am using the latest version of Filezilla.

Adding the optional option for FileZilla to change Simultaneous transfers based on current file size(user set) that is currently being transferred.

Example: User sets if a file is greater than or equal to 1GB(customizable) use only x(customizable) simultaneous transfer in transfer options when enabling this optional option by checkbox. While the norm of that user is using x simultaneous transfers. (x=1<->10)

Basically smaller files get multiple transfers while larger files run on a single or few transfer/s to speed up the transfer of the larger files since the current bottleneck for the larger files would be the network and disk speed.

I download a file from the server and EDIT the file. At some point later I have to re-download the file. Once it downloads I get the dialog box asking if I want to re-upload the file because it changed, but I also get the dialog box asking if I want to edit a file that's already being edited, then it locks up.

I'm running OS X 10.8.

Filezilla 3.7.0.2 is using the full bandwidth of the network connection and doesn’t honor the speed limits when they are set and active. This is happening for the both limits on Download & Upload.

If we are watching the reported momentary speed in the transfer queue everything is fine because the speed match to the configured limits. Actually Filezilla is transferring the file at the full speed of the connection ignoring the speed limits that were reported properly in the queue.

Example: 1) The size of the test file is about 101 MiB at:

ftp.mozilla.org/pub/firefox/releases/21.0/source/firefox-21.0.source.tar.bz2

2) The speed of my connection is 3 Mbits/s 3) The download limit is set to 100 KiB/s 4) The parameter for the reported speed of the Transfer Queue is checked to:

[v] Display momentary transfer speed instead of average speed

5) When I start the file download the reported speed in transfer queue is constant at 100 KiB/s 6) When the file is downloaded at 50% and I disable the speed limit then Filezilla reports that the file is downloaded at 100% and shows a speed that exceed the physical speed of the connection. Actually the entire file was downloaded when the transfer queue reports 30% with active speed limit.

I'd like to see Filezilla follow suit with the new Windows shortcut of Ctrl+Shift+N to create a new directory.

i'm using a laptop with a wifi card and a wired card.

i'd like to bind filezilla client to the wifi card but windows is telling it to use the wired one.

There's a feature like that one in filezilla server, can you add to filezilla client ?

The first use in the day, when I click on the icon on the desktop it can take from one to several minutes to get to the main screen.

FileZilla then seems to work OK until I close it using the red X having disconnected first. It then crashes with a 'problem and has to close'

Subsequent use of the program open/close etc appears to be OK. It is only the first instance that has a problem.

The Windows (? - it is not specific) message allows me to see a file that will be sent, but when I try and find it there is no such file.

FileZilla Client

Version: 3.7.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2013-06-18 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 3.1.11 SQLite: 3.7.16.2

Operating system:

Name: Windows XP (build 2600, Service Pack 3) Version: 5.1 Platform: 32 bit system

This would be most helpful and save people a lot of time. A typical work session includes uploading the same files multiple times. I can pretty much do everything from the keyboard except upload the same files, which I have to use the mouse. Actually, I don't think there is even a menu command to do this.

I posted a FileZilla design concept on Forrst ​https://forrst.com/posts/A_Modern_FileZilla-GuY and I was wondering if you would be interested in using this design in a future update like in version 4 or 5. I would be very happy to assist you in building out the rest of the design.

I've got a public key file (ppk)in a folder which has my name on it, namely: C:\Users\André\PPKs\AmazonEC2.ppk

This doesn't work. The same directory and file works for putty.

I copied the very file to C:\, meaning: C:\AmazonEC2.ppk

It worked fine.

It seems like Filezilla doesn't like non-ANSI characters in folder paths for public keys. At least on Windows.

When I minimize the filezilla client the task icon disappears. I see the process when I open task manager. I can not alt-tab to find the process. I am running on windows 7 (64bit) sp 1. Below is information from my about page.

FileZilla Client

Version: 3.7.1

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2013-06-18 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 3.1.11 SQLite: 3.7.16.2

Operating system:

Name: Windows NT 6.1 (build 7601, Service Pack 1) Version: 6.1 Platform: 64 bit system

Sometimes FileZilla connection seems to timeout or something similar. As leaving connection open for 15 minutes, returning and trying to upload. File will be added to upload queue but it wont be uploaded.

Trying to move around in server folder is also not possible.

Clicking disconnect and connect again fixes the issue. Or simply reconnect.

In CentOS if filezilla is minimize or not active and queue completes its show small notification on top right corner of screen.

It helps if we working on somthing still files upload or doing some operation

How In win 7 we will get this feature?

(In Magento after every update in code we need to delete files from cache directories. so we need to check again and again in filezilla to check status. This feature helps so many developer to use this time in productive work)

Thanks and regards,

Sandesh

Site Manager permits assigning a connection limit to individual saved sites.

Settings permits a global cap on connections.

In order to use multiple servers at once, you need to raise the global cap on connections. When you do that, you remove the connection limit for hosts where it's not specified explicitly.

Ideally, the global limit would be per-host/session (i.e. per tab), not overall, i.e. with a per-session limit of 1 connection, each tab can transfer one file at a time, but every tab is permitted to transfer data, instead of having stalled tabs.

At the moment, a global limit of 10 means that unrestricted/ad-hoc connections will get all 10 connections at once. This means that the limit must be set on every site one by one manually in Site Manager otherwise the global limit doesn't do anything useful, and this seems wrong.

Not a huge issue, just something to play with one day.

Please add "Resume download" item to context menu on files and folders under the "Download" item, because its very often daily operation resume download very big log files with out many unneeded clicks and wasted time for wait directory scans with many files.

Hello, There is if a feature I'm missing in FileZilla: Creating a Site profile with:

• Auth type = Normal/Interactive/Ask for Username
• no username
• a password

I connect often to a support sftp server where the login is the TikectID (as username) and a personal password.

If this feature is implemented then upon connection FileZilla will ask for the username and complete the login.

Thanks, Opher.

As there are lots of broken servers out there, an option to disable the timezone detection completely seems to be reasonable. The effect simply is that all dates parsed are considered UTC.

In FZ v3.7.3 (and the last few prior versions), I've noticed that after I've uploaded files via drag-and-drop, the shortcut keys don't work for the menus (Alt+F for File menu, etc.). I must use the mouse to access them---and you know how we keyboard geeks dislike that. :?)

With more developers using GIT or similar Version Control Systems, I have files and folders in my local folders which I must retain, but which I would not want/need to upload to my FTP server.

Similarly, some other developers (working on the same projects, or who have created plugins or other software which I am using) may have failed to properly sanitise their files, resulting in files being on the server which cannot be seen when I have a Filter applied, and which prevent the deletion of some folders (because the folders, containing these hidden files, are not empty).

Attempting to apply a Filter, where "CVS and SVN directories" are filtered locally (so I don't upload them) and not remotely (so I can see them and delete them as needed), when I try and apply Directory Comparison, I get an error:

---------------------------
Directory comparison failed
---------------------------
Cannot compare directories, different filters for local and remote directories are enabled
---------------------------
OK   
---------------------------

Could this alert be modified so that the buttons are "OK" and "Ignore"? Allowing users who want to apply different local and remote filters to do so, but warning other users that they may not be seeing a correct reflection of the local and remote files?

Hello,

When you have at least 2 tabs, there is a little cross on the right side of the tab, presumably to close the tab. But when you click on it, it doesn't work. The tab can be right clicked to be closed.

Steps to reproduce : Open two tabs Click the cross to close a tab Expected : the tab closes Bug : nothing happens.

This bug is present in version 3.7.3 on GNU/Linux plateform. I can't reproduce it on Mac OS X.

My window manager is Awesome WM.

Entering a password for the FTP proxy containing an ampersand (&), the ampersand character gets discarded, means it does not appear in filezilla.xml . Example password to test with: wRk8!uN3&UHeQ%h Gets stored in filezilla.xml as: wRk8!uN3UHeQ%h Entering the password as wRk8!uN3&amp;UHeQ%h in filezilla.xml does not solve the issue, so retrieving the FTP proxy password with an &amp; entity is also an issue.

When you have directory comparison toggled ON and delete a folder from the remote site panel the directory comparison untoggles itself.

Expected behavior would be to keep directory comparisons toggled ON.

Scenario I enable directory comparison and both "compare file size" and "compare time modification" show lots of hilights on directories whose content is absolutely the same.

This happens because Filezilla compares directories the same way it compares files but directories can't be aligned client/server side because their modification time is actually the creation time of the first upload. So, AS SOON as I upload a new directory, it becomes always NEWER than the original and so marked green server side. On the contrary, if I upload a dir, then I delete and recreate it client side, it will be always newer than server side, unless I delete that on the server and upload again. But in this case we get back to the previous problem: on the server I'll have a newer dir. So there is no chance to have it working.

SOLUTION I don't ask you a complex/heavy content recursive analysis (as asked e.g. here ​http://trac.filezilla-project.org/ticket/4424). I don't ask you to to more, I ask you to do less, adding a very much simpler option: "Test only files" which can however do the job for me.

This can probably be implemented in minutes and can save the eyes of millions of users. :-)

PS: I work on Linux client side and server side with the option "preserve timestamp". Everything it's OK for me except these useless hilights on directories.

Procedure: 1) Select filezilla Edit > Settings > 2) In Settings window select Generic proxy 3) In Generic proxy select 'HTTP/1.1 using CONNECT method' enter proxy host eg. 10.9.8.123 enter proxy port: 8080 4) click ok 5) close filezilla client 6) re-launch filezilla client 7) Select Edit > Settings > 8) In Settings window select Generic proxy 9) the host and port details previously entered have been lost. host field is empty and port field states 0

FileZilla Client

Version: 3.7.3

Build information:

Compiled for: i586-pc-mingw32msvc Compiled on: x86_64-unknown-linux-gnu Build date: 2013-08-07 Compiled with: i586-mingw32msvc-gcc (GCC) 4.2.1-sjlj (mingw32-2) Compiler flags: -g -O2 -Wall -g -fexceptions

Linked against:

wxWidgets: 2.8.12 GnuTLS: 3.1.11 SQLite: 3.7.16.2

Operating system:

Name: Windows NT 6.1 (build 7601, Service Pack 1) Version: 6.1 Platform: 32 bit system

Hello

There is one setting which I very often change: the max. number of parallel file transfers

It would be great to have an up/down spinner control in the Toolbar to directly change this setting with one mouse click.

Thanks a lot, kind regards, Thomas

Use the delete key to delete a large directory on the server with 1000 or more files in it

Start an upload using drag and drop from the left hand local machine directory pane into another directory

The delete is aborted in mid progress

Try it the other way around - with a long upload in progress - delete a different directory - upsets the upload but can recover

I regularly upload 5000 plus files - there is a mix of small ones (under 100k) and large ones (over 50M)and several files that have not changed at all - so use overwrite only if changed

You operate two parallel ftp channels. These tend to be response time limit when dealing with short files and bandwidth limited when transferring large files.

By selecting one channel only to do the biggest files first and the other to do smallest files first, you will get better use of bandwidth

Also note with a 60M line running more channels goes faster (test done by running two Filezilla instances concurrently)

I have a large number of websites with the same or very similar directory structures. There is a risk I make errors and upload from the wrong directory.

On the local site pane, could you consider placing a user controlled optional padlock against a directory such that you cannot, when padlocked, navigate outside that directory and its children. Then have that directory included in the remembered profile for a particular ftp address.

Now when you open an ftp address you will have the relevant local file area showing.

This is very similar to bug 4667: ​http://trac.filezilla-project.org/ticket/4667 but I think it is very important to bring this up again, as the excuse that the code relies on a clearly inadequate API is, IMHO, not acceptable for this actually DANGEROUS behaviour! I copied a file from one directory to another, decided I didn't want it there, and subsequently deleted it - only to discover that the file was NOT copied but instead moved, despite visual indications to the contrary, thus removing the only instance of that file entirely!

In fact, I'm not even convinced by the argument that the Windows drag-and-drop cursor cannot not display a plus sign - it regularly doesn't when I am MOVING files in Windows Explorer. Or if you are correct in that it doesn't, then a different icon system should be used. You mention that FTP can't do copy - that's fine if it can't, but you should give users any sort of visual indication that this is the case!

And before anyone says it, the fact that I should have had a backup is not applicable in this case - the copy was an effort to MAKE a backup! It your tool informs you, quite clearly, that you have TWO copies of a file, when it is hiding the fact that you only have one, then the tool is at fault and needs correcting!

when we currently paste such ftp path (s)​ftp://user:password@host/directory into filezilla it's extracted in the way:

user password host /directory

the last part is not corrected it should be just "directory" without leading slash

why it make different?

on most ftp systems, root directory == user directory (and it make no difference)

when - for security reasons - account is chrooted, then slash from beginning point outside user directory and the path can't be found

example:

(s)​ftp://user:password@host/directory

on our system (with chroot) /bin /data (it's user "home" directory) /data/directory /dev /etc ....

so runing cd /directory will fail, but when you login (your current directory is set to /data) and try cd directory (relative path) everything will work fine.

so the whole bug is about removing 1st slash from directory path. (only 1st, because path like (s)​ftp://user:password@host//data/directory should work - in this case your using absolute path)

such way of parsing path is used for example in FF (and other programs)

if you have any questions please let me know.

I can also prepare test (valid for 24h) account on our system (but I can't share it by ticketing system, so please mail me if such account would be helpful)

Regards, Bartosz

In current situation if file being transfer has a very long path, then user can not see the file name only the path with ... at the end.

A better way would be to have file name visible all the time. Some e.g. Current: /dir/another/dir/and/long/path... Desirable: /dir/another/dir/a...filename.ext

Current: /dir/veryveryveryverylongfilen... Desirable: ...veryveryverylongfilename.ex... (although this is not complete file name, but more informative then before.

Other approach is to give option to user how they want to see, the existing way or the new way.

Need an option for more log files.

Having 1 complete long running log file is great for debugging, but what about people who need to process those things, or even just try to figure them out.

I propose at the Program Preferences level, X options,

1. Keep what it currently uses, 1 big file limited by MB.
2. Create a Log file for each Site (FZ-Client_Log_[SITENAME]_[DATETIME].log)
3. Both 1 & 2.
4. Keep NO LOG FILE! (Warning, no log file = no chance in getting quality support from filezilla-project.org.

Then at the Site Level Preferences, At this level, give users some options, what to log, log name format.

This all stems from trying to sort through a massive log file, that includes data from dozens of sites. It's nuts. I know I'm having a problem with 1 site, I just want to see that 1 sites log.

Or is there a Log File Anal-yzer that can handle this?

Thanks for your time.

When trying to do multi-select by clicking on an empty spot in the file list, rather than bringing up the drag lines, the pointer flies to the top-right corner of the screen and scrolls the file list to the top. This occurs in both the local and remote file lists.

This is only on empty space where a file would not be selected. If a file is selected on click this issue does not occur. It also only occurs if the file list has more files than will fit without scrolling, and if it has been scrolled down.

If there is only one host, it would be nice if FileZilla automatically connected when it was launched, instead of having to do so manually. This could be an enable/disable feature, also with a "default" host if there's more than one. - Thanks!

After downloading the setup file for 3.7.3, I try to run and get an error message, "Error writing temporary file. Make sure your temp folder is valid." Which temp folder is this referring to and how does one make it valid?

Filezilla 3.7.3 (if it matters) Layout of file and directory panes: widescreen

The status bar has an icon that I guess is supposed to report the download and upload speed. It's basically like a semaphore with a red and green light but they never light up.

When mouse hovers over the icon, it says the download and upload speed, but the values reported are incorrect. It seems the download and upload speeds are computed based on the part of the queue that's visible in the interface.

For example, queue 100-200 files to upload to a ftp server, then queue 100-200 files to download from a ftp server and limit to 5 download slots and 5 upload slots.

At the bottom, I can only see the 5 files being uploaded and the rest of the files queued for upload. I know 5 files are being downloaded but they're all the way at the bottom of the queue.

If I move mouse over the icon, it will say Download : 0 KB/s , Upload : 300 KB/s (or whatever). If I scroll down until I see the active downloads, the files being uploaded are no longer visible in the interface so when i put mouse over the icon I get Download: x MB/s , Upload : 0 KB/s When both uploads and downloads are visible, tooltip shows both speeds properly.

So basically it looks like the math regarding download speed is done just on what's visible on screen (or I don't know, maybe just a small subset of the queue the application holds in memory for that view)

ps (this is basically feature request).. It would help if I could see in the status bar the amount of data queued split between uploads and downloads, right now you only see the Total queued.

For example, I have 400 GB of transfers queued but no way to easily tell how much is left to upload when I'm not sure if the server has enough free disk space to hold what's left.

corrupted files even though say OK. here is screenshot so you can see the size of files are different, note the G4 SY Master.xmp which has completed. Seems to be related to a "resume" since I was disconnected and the transfer restarted automatically.

Here is log: Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Command: SYST Response: 215 Windows_NT Command: FEAT Response: 211-Extended features supported: Response: SIZE Response: MDTM Response: 211 END Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current directory. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,143). Command: LIST Response: 125 Data connection already open; Transfer starting. Response: 226 Transfer complete. Status: Directory listing successful Status: Retrieving directory listing... Command: CWD NEW EXPORTS FROM REN Error: Connection timed out Error: Failed to retrieve directory listing Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: CWD / Response: 250 CWD command successful. Command: PWD Response: 257 "/" is current directory. Command: CWD NEW EXPORTS FROM REN Response: 250 CWD command successful. Command: PWD Response: 257 "/NEW EXPORTS FROM REN" is current directory. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,146). Command: LIST Response: 125 Data connection already open; Transfer starting. Response: 226 Transfer complete. Status: Directory listing successful Status: Retrieving directory listing... Command: CWD G4 SY Dvd Assets new Response: 250 CWD command successful. Command: PWD Response: 257 "/NEW EXPORTS FROM REN/G4 SY Dvd Assets new" is current directory. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,147). Command: LIST Response: 125 Data connection already open; Transfer starting. Response: 226 Transfer complete. Status: Calculating timezone offset of server... Command: MDTM G4 SY Master.m2v Response: 213 20131024121555 Status: Timezone offsets: Server: -14400 seconds. Local: -14400 seconds. Difference: 0 seconds. Status: Directory listing successful Status: Connecting to 208.124.197.26:21... Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.xmp Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.wav Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 250 CWD command successful. Command: PWD Response: 257 "/NEW EXPORTS FROM REN/G4 SY Dvd Assets new" is current directory. Command: TYPE I Response: 250 CWD command successful. Command: PWD Response: 200 Type set to I. Command: PASV Response: 257 "/NEW EXPORTS FROM REN/G4 SY Dvd Assets new" is current directory. Command: TYPE I Response: 227 Entering Passive Mode (208,124,197,26,21,148). Command: RETR G4 SY Master.wav Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,149). Command: RETR G4 SY Master.xmp Response: 125 Data connection already open; Transfer starting. Response: 125 Data connection already open; Transfer starting. Error: Connection timed out Error: File transfer failed after transferring 36,400 bytes in 35 seconds Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.xmp Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,150). Command: REST 36400 Response: 350 Restarting at 36400. Command: RETR G4 SY Master.xmp Response: 125 Data connection already open; Transfer starting. Response: 421 Timeout (120 seconds): closing control connection. Response: 421 Terminating connection. Error: Connection closed by server Response: 226 Transfer complete. Status: File transfer successful, transferred 1,295,147 bytes in 138 seconds Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.m2v Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,151). Command: REST 0 Response: 350 Restarting at 0. Command: RETR G4 SY Master.m2v Response: 125 Data connection already open; Transfer starting. Error: Connection timed out Error: File transfer failed after transferring 5,401,141 bytes in 610 seconds Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.wav Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,152). Command: REST 5401141 Response: 350 Restarting at 5401141. Command: RETR G4 SY Master.wav Response: 125 Data connection already open; Transfer starting. Error: Connection timed out Error: File transfer failed after transferring 8,477,636 bytes in 979 seconds Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.m2v Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,153). Command: REST 8477636 Response: 350 Restarting at 8477636. Command: RETR G4 SY Master.m2v Response: 125 Data connection already open; Transfer starting. Error: Transfer connection interrupted: ECONNABORTED - Connection aborted Error: Disconnected from server: ECONNABORTED - Connection aborted Error: File transfer failed after transferring 35,355,767 bytes in 18779 seconds Error: Transfer connection interrupted: ECONNABORTED - Connection aborted Error: Disconnected from server: ECONNABORTED - Connection aborted Error: File transfer failed after transferring 39,832,699 bytes in 19329 seconds Status: Connecting to 208.124.197.26:21... Status: Connection attempt failed with "EHOSTUNREACH - No route to host". Error: Could not connect to server Status: Connecting to 208.124.197.26:21... Status: Connection attempt failed with "EHOSTUNREACH - No route to host". Error: Could not connect to server Status: Delaying connection for 5 seconds due to previously failed connection attempt... Status: Delaying connection for 5 seconds due to previously failed connection attempt... Status: Connecting to 208.124.197.26:21... Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.wav Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.m2v Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 250 CWD command successful. Response: 250 CWD command successful. Command: TYPE I Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,200). Command: REST 45233840 Response: 227 Entering Passive Mode (208,124,197,26,21,201). Command: REST 43833403 Response: 350 Restarting at 45233840. Command: RETR G4 SY Master.wav Response: 350 Restarting at 43833403. Command: RETR G4 SY Master.m2v Response: 125 Data connection already open; Transfer starting. Response: 125 Data connection already open; Transfer starting. Error: Connection timed out Error: File transfer failed after transferring 52,762,887 bytes in 1781 seconds Status: Connecting to 208.124.197.26:21... Error: Connection timed out Error: File transfer failed after transferring 51,105,114 bytes in 1782 seconds Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.wav Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.m2v Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 250 CWD command successful. Response: 250 CWD command successful. Command: TYPE I Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,220). Command: REST 97996727 Response: 227 Entering Passive Mode (208,124,197,26,21,221). Command: REST 94938517 Response: 350 Restarting at 97996727. Command: RETR G4 SY Master.wav Response: 350 Restarting at 94938517. Command: RETR G4 SY Master.m2v Response: 125 Data connection already open; Transfer starting. Response: 125 Data connection already open; Transfer starting. Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,222). Command: LIST Response: 125 Data connection already open; Transfer starting. Response: 226 Transfer complete. Status: Directory listing successful Status: Retrieving directory listing... Command: CDUP Response: 250 CWD command successful. Command: PWD Response: 257 "/NEW EXPORTS FROM REN" is current directory. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,223). Command: LIST Response: 125 Data connection already open; Transfer starting. Response: 226 Transfer complete. Status: Directory listing successful Error: Connection timed out Error: File transfer failed after transferring 32,266,124 bytes in 2091 seconds Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.wav Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,227). Command: REST 130262851 Response: 350 Restarting at 130262851. Command: RETR G4 SY Master.wav Response: 125 Data connection already open; Transfer starting. Error: Connection timed out Error: File transfer failed after transferring 37,412,485 bytes in 2792 seconds Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.m2v Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,228). Command: REST 132351002 Response: 350 Restarting at 132351002. Command: RETR G4 SY Master.m2v Response: 125 Data connection already open; Transfer starting. Error: Connection timed out Error: File transfer failed after transferring 7,832,393 bytes in 893 seconds Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.wav Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,232). Command: REST 138095244 Response: 350 Restarting at 138095244. Command: RETR G4 SY Master.wav Response: 125 Data connection already open; Transfer starting. Error: Connection timed out Error: File transfer failed after transferring 1,676,733 bytes in 219 seconds Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.m2v Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,233). Command: REST 134027735 Response: 350 Restarting at 134027735. Command: RETR G4 SY Master.m2v Response: 125 Data connection already open; Transfer starting. Error: Connection timed out Error: File transfer failed after transferring 16,715,824 bytes in 1676 seconds Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.m2v Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,234). Command: REST 150743559 Response: 350 Restarting at 150743559. Command: RETR G4 SY Master.m2v Response: 125 Data connection already open; Transfer starting. Error: Connection timed out Error: File transfer failed after transferring 11,362,324 bytes in 1047 seconds Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.m2v Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,21,235). Command: REST 162105883 Response: 350 Restarting at 162105883. Command: RETR G4 SY Master.m2v Response: 125 Data connection already open; Transfer starting. Error: Disconnected from server: ECONNABORTED - Connection aborted Error: Disconnected from server: ECONNABORTED - Connection aborted Error: File transfer failed after transferring 102,786,797 bytes in 7211 seconds Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Starting download of /NEW EXPORTS FROM REN/G4 SY Dvd Assets new/G4 SY Master.wav Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,22,0). Command: REST 240882041 Response: 350 Restarting at 240882041. Command: RETR G4 SY Master.wav Response: 125 Data connection already open; Transfer starting. Status: Connecting to 208.124.197.26:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER ftpuser Response: 331 Password required for ftpuser. Command: PASS * Response: 230 User ftpuser logged in. Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: CWD /NEW EXPORTS FROM REN/G4 SY Dvd Assets new Response: 250 CWD command successful. Command: TYPE I Response: 200 Type set to I. Command: PASV Response: 227 Entering Passive Mode (208,124,197,26,22,2). Command: LIST Response: 125 Data connection already open; Transfer starting. Response: 226 Transfer complete. Status: Directory listing successful

I create a queue, it starts downloading, and then I set file priorities. What I mean is: while the queue is downloading, I change the priorities of files. I end up with something like:

file1 low - waiting file2 highest - waiting file3 medium - downloading- I only recently set file2 to highest file4 low - waiting file5 high - waiting file6 low - waiting

However when file3 finishes, the next file to be downloaded is file5, NOT file2. It seems Filezilla is only scanning the remainder of the queue when picking the next file to download, rather than the whole queue.

When deleting only one file (maybe few more) maybe it is better to show which files about to delete? At now filezilla only shows Yes or No prompt.

Hi,

I've written up an appdata file for filezilla so it can be part of gnome-software in a more complete manner. Please find it attached. I'm going to update the Fedora package to include this file sometime this week so that it's picked up by gnome-software for Fedora 20.

It'll be great if this file can be included in future releases, and optionally, if the build system could install it to /usr/share/appdata. The installation isn't necessary, since us maintainers can do it manually too.

Please feel free to edit the file to improve the descriptions, add more screenshots etc. The screenshots must be 16:9 in aspect ratio though. Here's a post explaining how to make such screenshots: ​http://blogs.gnome.org/hughsie/2013/10/08/how-to-take-169-screenshots/

More information on appdata files: ​http://people.freedesktop.org/~hughsient/appdata/

I'm trying to upload a directory (with files and subdirectories) from an external USB HD. FileZilla doesn't create the directory structure. This results in a failure of the upload. When trying to upload the same files from the local drive everything works.

I have this structure locally:

C is the local Drive, F the external USB HD.

C:/folder/file.txt F:/folder/file.txt

I have this structure remotely:

/

The action I've tried:

1. Local F:/folder --Drag--> Remote / : fails
2. Remote make directory folder/ and local F:/folder/file.txt --Drag--> remove /folder : works
3. local C:/folder --Drag--> remote / : works
4. local F:/folder/file.txt --Drag--> remote / : works

I hope this is sufficient information.

I know this has been asked for in the past - there is a reason that the DEBUG file does not provide the desired output... The DEBUG file is the step by step FTP commands that execute during a session. The [Results] frame in the [Remote file search] dialog includes the full path associated with the (filename) result in the same line - in DEBUG file the directory listing COMMAND is a completely different line in the output. My request is to add a button or right-click option to [export to csv] like function. I will add files with details...

I am having a similar issue with certificates signed by DigiCert. The certificate is not trusted despite it originating from a trusted CA. Other clients handle this perfectly (Transmit, Fetch, Cyberduck - even PHPStorm allows for connections over TLS using this certificate chain).

This has been confirmed on both OSX and Windows 7 running the latest Filezilla release of 3.7.3.

In Windows 7 (and maybe Vista) they introduced the recently used popup on applications. For example, if you go to Microsoft Word on the start menu, there is a little arrow to the right of it that will popup recently opened or pinned documents.

It would be nice if Filezilla would use this for recently connected to sites.

Add the Right Mouse Button actions menu in the Edited Dialog (Ctrl+E) please, and hotkey ctrl+a. coz its very slow to use buttons/

EMET 4.1 SimExecFlow triggers an "appcrash" with exception code c000001d in fzsftp.exe.

FileZilla Client 3.7.3 OS: Windows 7 SP1 x64

it is possible in the transfert options to add the ability to choose the priority of transfer based on the size of the file by setting the maximum size that the file I need to be transferred first

Downloads not following que in the order they were added

SFTP Server is IBM Sterling proprietary SFTP Server, The GUI explorer modify date column mixed with path name, see attachments screenshots, I have no problem with other SFTP client

When connecting via FTP to an OpenVMS server, the "last modified" column is showing the file creation date.

This is a resurrection of client bug #790 (which was closed due to inactivity). I was not the person who filed that originally. I am the senior FTP support specialist with Novell Worldwide Support. I will base this report description on the older one, but will update it:

Novell's FTP server software allows one to access the files on ANY Novell file server in their directory tree, using this syntax: cwd server/volume/dir/subdir

And some Novell FTP servers will even let someone's home directory be in that format.

This feature is sometimes referred to at Novell as a "FTP Gateway" where one FTP server can give users access to an entire Directory Tree of servers. We also call it our "remote server" feature.

Novell FTP server is (to my knowledge) the only FTP server in the world to provide this feature. So admittedly, this effects only a subset of your user base. But when FileZilla (3.7.3) sees such a syntax (through pwd output), or when you enter a path into Filezilla's "remote site" field, such as "server1/volume1/path/" Filezilla often strips off the first '/' character. This seems to especially be a problem when using the QuickConnect button to start a session, rather than Site Manager. But I've had customers complain of it even when using Site Manager.

Because of this, anytime Filezille wants to reference the absolute path in a command, it references "/server1/..." instead of "server1/...". This difference causes the Novell FTP server to look for a local path (local to the FTP server) called "/server1/..." rather than access the separate host machine "server1". And thereby, it returns a '550 invalid path' error, or similar.

I would be happy to work closely with you to pursue this issue. Many of our common customer would benefit from having Filezilla know that (at least with Novell servers) it should preserve double-slash syntax rather than strip it off. Also, please note that not every Novell FTP server would be using this syntax. So it wouldn't be as simple as saying, "build every absolute path for Novell beginning with a double slash." Instead, it will be a matter of looking at what syntax is given (via PWD or via user input) and if it begins with "" preserve that rather than strip it to "/".

I will quote the following from the older bug as well, though I have not verified all of this:

Another FTP client, NCFtp (www.ncftp.com) had the same issue a few versions back, but has since been fixed. WS_FTP on Windows, Fetch and Transmit on Mac OSX, and the command line FTP program on any Mac/Linux/Windows system all work correctly with this functionality and do not have this issue.

That is not to say that all those clients fully understand and automatically correctly use the "" syntax. But in many cases, clients don't insist on referencing the absolute path as much as Filezilla does, so they will often "just work" where Filezilla doesn't.

Here's a log of a Filezilla FTP session to a Novell FTP server, demonstrating this:

Status: Connecting to 151.155.214.77:21... Status: Connection established, waiting for welcome message... Response: 220-Welcome to Pure-FTPd. Response: 220-You are user number 1 of 1000 allowed. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER admin Response: 331 User admin OK. Password required Command: PASS * Response: 230-User admin has group access to: admingroup Response: 230 OK. Current directory is dp-sles11sp2VOL1\sub2 Command: OPTS UTF8 ON Response: 200 OK, UTF-8 enabled Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "dp-sles11sp2/VOL1\sub2" is your current location Status: Directory listing successful Status: Connecting to 151.155.214.77:21... Status: Connection established, waiting for welcome message... Response: 220-Welcome to Pure-FTPd. Response: 220-You are user number 2 of 1000 allowed. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER admin Response: 331 User admin OK. Password required Command: PASS * Response: 230-User admin has group access to: admingroup Response: 230 OK. Current directory is dp-sles11sp2VOL1\sub2 Command: OPTS UTF8 ON Response: 200 OK, UTF-8 enabled Status: Connected Status: Starting upload of C:\Users\dpartrid\Desktop\add5.pdf Command: CWD /dp-sles11sp2/VOL1\sub2 Response: 550 Can't change directory to /dp-sles11sp2/VOL1/sub2: No such file or directory Command: CWD /dp-sles11sp2 Response: 550 Can't change directory to /dp-sles11sp2: No such file or directory Command: CWD / Response: 250 OK. Current directory is / Command: MKD dp-sles11sp2 Response: 550 Can't create directory: Permission denied Command: MKD /dp-sles11sp2/VOL1\sub2 Response: 550 Can't create directory: No such file or directory Command: CWD /dp-sles11sp2/VOL1\sub2 Response: 550 Can't change directory to /dp-sles11sp2/VOL1/sub2: No such file or directory Command: SIZE /dp-sles11sp2/VOL1\sub2/add5.pdf Response: 550 Can't check for file existence

More often than not, I'm right-clicking on a local file in the left panel, in order to copy-paste it onto an Explorer window. The use case :

1. local files often needs to be re-organized and we only realize it when handling them when working with FTP.
2. in my connections many remote folders are paired with a "Default local directory", but distant files sometimes needs to head to a second local directory elsewhere, and browsing forth and back inside Filezilla is sometimes not desirable.

I'm really intuitively expecting to have this function somewhere and am often frustrated to get remembered it still doesn't exist.

Would it be possible to plan this feature in a next release ?

Besides, thanks a lot for this good software. Regards

Well, I'm not sure if it's a FileZilla error or a server error; but as you can see in the attached image, the same file (Arabic name) was uploaded TWICE to the same path!

Set default account logon type "Normal" when create new Account. ( No anonymus )

(Sorry, my english is bad :p )

It would be immensely helpful if I could right-click on an active transfer and click "Interrupt". That specific file would stop, (like all files do if you right-click the queue and untick Process Queue), and the highest priority file in the queue would be started.

I have a queue downloading and the maximum number of transfers are already transferring. I add a file to the queue and set it to priority 'Highest'. The only way to get the new file downloading is to stop the whole queue processing, then restart it. I have this issue many times every time I do a big upload and restarting the queue causes all sorts of problems (eg, errors "ftpcontrolsocket.cpp(1871): Waiting for replies to skip") and overheads.