Custom Query (8171 matches)

In Options -> Directory Cache, if one or more of the "hours, minutes, seconds" entries has *no value* (i.e. nothing is entered there, and isn't zero), hitting OK brings up a blank prompt with nothing but an ok button.

There's no indication of what is wrong, and had I not remembered exactly what I had changed I might not have figured it out.

It might also be good to assume non-entered values here are zero.

Found the bug using FZ 2.2.4b, but confirmed in 2.2.4f on both win2k and winxp.

When you try to edit files with characters which are illegal in windows, such as a : FileZilla crashed. Downloading these files works fine, special characters are converted to _. This bug is slightly related to bug # 888404, since filezilla must be able to download a file to a temp dir, then upload it and rename the file with special chars.

If you enter a folder after connecting to a server, that begins with two slashes (), they are replaced by a single slash (/). Example: fh-kroesus/data1/kurs is converted to: /fh-kroesus/data1/kurs

Response: 550 Invalid Path Error: Could not retrieve directory listing

Cannot set the folder permissions of a remotely created directory until FileZilla is refreshed (F5) in v. 2.2.5.

Also date is set to '???', until refreshed. Error Message on click of ‘File Attributes…’ menu item: 'The Parameter is incorrect.'

Hi, when connecting to a sftp server (over ssh2), if you submit an invalid password, the status message is really not helpful.

Here's what it looks like :

Status: Connecting to 10.61.3.122:22 ... Status: Connected with 10.61.3.122:22, initializing SFTP connection... Command: CONNECT der01ale@10.61.3.122:22 Error: FzSFtp.exe was closed, terminating connection. Error: Unable to connect! Status: Waiting to retry... (5 retries left)

There is no clear evidence that this was a password problem. Here's what it looks like with debug on (with the same wrong password) : +++++++++++++++++++++++++++ Status: Connecting to 10.61.3.121:22 ... Trace: FzSFtp.exe: FzSFtp started and initialized. Trace: SftpControlSocket.cpp(2288): OnConnect(0) caller=0x003af000 Status: Connected with 10.61.3.121:22, initializing SFTP connection... Command: CONNECT der01ale@10.61.3.121:22 Trace: FzSFtp.exe: Ssh.c(1949): Server version: SSH- 2.0-Sun_SSH_1.0 Trace: FzSFtp.exe: Ssh.c(1985): We claim version: SSH-2.0-PuTTY-FZ-Local: Mar 21 2004 15:40:05 Trace: FzSFtp.exe: Ssh.c(1987): Using SSH protocol version 2 Trace: SftpControlSocket.cpp(2570): OnReceive(0) caller=0x003af000 Trace: FzSFtp.exe: Ssh.c(4244): Doing Diffie-Hellman key exchange Trace: SftpControlSocket.cpp(2570): OnReceive(0) caller=0x003af000 Trace: FzSFtp.exe: Ssh.c(4301): Host key fingerprint is: Trace: FzSFtp.exe: Ssh.c(4302): ssh-rsa 1024 73:f3:02:7f:28:07:ef:90:b2:d1:d0:f0:f3:f5:53:e2 Trace: SftpControlSocket.cpp(2570): OnReceive(0) caller=0x003af000 Trace: FzSFtp.exe: Ssh.c(675): Initialised AES-128 client->server encryption Trace: FzSFtp.exe: Ssh.c(675): Initialised AES-128 server->client encryption Trace: SftpControlSocket.cpp(2570): OnReceive(0) caller=0x003af000 Trace: SftpControlSocket.cpp(2570): OnReceive(0) caller=0x003af000 Trace: FzSFtp.exe: Ssh.c(5284): Sent password Trace: SftpControlSocket.cpp(2570): OnReceive(0) caller=0x003af000 Trace: FzSFtp.exe: Ssh.c(4751): Access denied Trace: FzSFtp.exe: Ssh.c(5124): Unable to authenticate Trace: SftpControlSocket.cpp(2356): OnClientError (1) caller=0x003af000 Error: FzSFtp.exe was closed, terminating connection. Trace: SftpControlSocket.cpp(2376): DoClose(0) caller=0x003af000 Trace: SftpControlSocket.cpp(2406): ResetOperation (4100) caller=0x003af000 Error: Unable to connect! Status: Waiting to retry... (5 retries left) ++++++++++++++++++++++++++++++++++

I also tested this with a plain FTP server, and the message is really clear, so this seems to affect only sftp over ssh2 connections.

_adery_ at _hotmail_ dot _com_

FileZilla doesn't display any error messages when a user tries to uplaod or add to queue when not connected to a server.

While trying to use GSSAPI authentication, I'm getting the following error:

Trace: GSSAPI authentication succeeded Command: PBSZ 4096 Trace: Encrypted command: ENC YDsGCSqGSIb3EgECAgIBAAAAAPwyMZsNK8HgjRWIvZzVteBaHWO4difNb4Tp1f8BR8eyZPF3lR9l0aCg== Trace: Encrypted reply: 632 YDsGCSqGSIb3EgECAgIBAAAAAP0L5v0lDTPAfV3tawWxEdrPYRum6cAkxXAgokmdZ2wGhRWSOOvmUf7w== Response: 200 OK Trace: GSSAPI PBSZ failed Trace: FtpControlSocket.cpp(807): DoClose(10240) OpMode=1 OpState=-5 caller=0x003abf40 Trace: FtpControlSocket.cpp(2919): ResetOperation(14340) OpMode=1 OpState=-5 caller=0x003abf40 Error: Unable to connect! Trace: ControlSocket.cpp(184): m_pGssLayer changed state from 16253000 to 4 caller=0x003abf40 Error: Interrupted by user!

The server appears to be returning '200 OK' in response to the 'PBSZ 4096' command, but the FileZilla client doesn't appear to be accepting that repsonse.

Windows XP, MIT Kerberos for Windows 2.6b3 installed, valid K5 TGT, FileZilla causes a host/hostname@REALM ticket to be fetched, as expected.

I searched through the sources, but couldn't find any indication of where the 'PBSZ 4096' command was being sent, or where the 'GSSAPI PBSZ failed' message is being returned.

Any help would be appreciated.

FileZilla_2_2_5_setup can not be installad in Windows NT with service pack 6a. Just when the installation is started after answering the questions, it aborts with an "Application error occurred" message.

Hi, the error message "Error: The language DLL for the language 'Deutsch' could not be found" occurs on the first start of FileZilla-2.2.5 after installation (where I selected "German" as language) on Windows 98. The installation directory is F:\DFUE\FTP\FileZilla\2\2\5, a after installation write-protected samba-share (samba 2.2.8a). FileZilla itself shows "English" as list item in "Edit|Settings|Language" only. The DLLs in F:\DFUE\FTP\FileZilla\2\2\5\ are: ---8<--- linserv:/usr/local/smbd/Apps/DFUE/FTP/FileZilla/2/2/5 # ls -l *.[dD][lL][lL] -r--r--r-- 1 admin admins 106496 Mar 21 16:43 FzResBu.dll -r--r--r-- 1 admin admins 77824 Mar 21 16:43 FzResCh.dll -r--r--r-- 1 admin admins 77824 Mar 21 16:43 FzResChs.dll -r--r--r-- 1 admin admins 114688 Mar 21 16:43 FzResDe.dll -r--r--r-- 1 admin admins 106496 Mar 21 16:43 FzResEs.dll -r--r--r-- 1 admin admins 114688 Mar 21 16:43 FzResFr.dll -r--r--r-- 1 admin admins 94208 Mar 21 16:43 FzResHu.dll -r--r--r-- 1 admin admins 110592 Mar 21 16:43 FzResIt.dll -r--r--r-- 1 admin admins 86016 Mar 21 16:43 FzResJp.dll -r--r--r-- 1 admin admins 86016 Mar 21 16:43 FzResKr.dll -r--r--r-- 1 admin admins 86016 Mar 22 01:38 FzResNor.dll -r--r--r-- 1 admin admins 106496 Mar 21 16:43 FzResPo.dll -r--r--r-- 1 admin admins 102400 Mar 21 16:43 FzResRu.dll -r--r--r-- 1 admin admins 323584 Oct 23 11:11 dbghelp.dll -r--r--r-- 1 admin admins 27648 Oct 5 11:26 fzgss.dll -r--r--r-- 1 admin admins 373760 Dec 8 00:35 libeay32.dll -r--r--r-- 1 admin admins 67584 Dec 8 00:35 ssleay32.dll ---8<---

Some installation tests on local drives shows, that this error occurs only, if the installation directory is a samba network share, not depending on access rights.

Any hints to solve that?

Some other remarks: 1) The deinstallation program should fail, if the program-to-be-deinstalled is running while deinstallation (more general: if any of the files is in use by the OS) 2) The deinstallation does not delete the file "FzSFtp.exe"

Regards, Matthias

Go to Site Manager -> [Advanced] If you enter a relative path for the Default remote directory eg reports/

then click [OK]. When you go back to look at it, it changes to an absolute path by adding a '/' in front eg /reports/

We have recently started trialling Filezilla in a Corporate (multi-user) environment, and this functionality is fairly important.

Everything else has been spot on so far - congratulations on a great project =)

Regards, Bernard Gray bernard_gray@…

Status: Connecting to apollo ... Status: Connected with apollo, negotiating SSL connection... Response: 220---------- Welcome to Pure-FTPd [TLS]

Response: 220-You are user number 2 of 10 allowed. Response: 220-Local time is now 15:29. Server port: 21. Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: AUTH TLS Response: 234 AUTH TLS OK. Status: SSL connection established. Waiting for welcome message... Command: PBSZ 0 Response: 200 PBSZ=0 Command: PROT P Response: 534 Fallback to [C] Command: USER horia Response: 331 User horia OK. Password required Command: PASS Response: 230-User horia has group access to: cvs

video audio dialout

Response: 230- uucp users Response: 230-This server supports FXP transfers Response: 230 OK. Current restricted directory is / Status: Connected Status: Retrieving directory listing... Command: CWD /store/ Response: 250 OK. Current directory is /store Command: PWD Response: 257 "/store" is your current location Command: PASV Response: 227 Entering Passive Mode (192,168,254,132,167,79) Command: TYPE A Response: 200 TYPE is now ASCII Command: LIST Response: 150 Accepted data connection Error: Could not retrieve directory listing Response: 226-Options: -a -l Response: 226 4 matches total Command: TYPE A Response: 200 TYPE is now ASCII

When I try to view/edit a remote file (attached as restart.ac) that is dated 1970-01-01 Filezilla crashes. The same happens when trying to move the file from remote site to local PC. The file has no info in the time column.

I'm unable to start Filezilla on XP Pro. Latest version of FZ (2.2.5f) All updates on XP. When I start Filezilla it shows up in the task list but never displays any thing. If I start FZ again, it adds another entry to the task list with the same result as before (nothing). I've searched the forums and found one other person with the same problem. I didn't find any other bug report on this problem. I don't know what else to try. I'd be glad to work with someone on this problem.

The FileZilla server can not open the data port when the port command looks like:

PORT 192,168,160,010,80,51

Seems the leading zero in the 010 bothers him as changing the IP to 100 worked well.

Just for the files: the client is a DEMAG injection moulding machine with an NC4 controller running a EuroMap63 protocol via FTP. They have a very lousy FTP implementation and for now only Serv-U and FileZilla (accept the mentioned flaw) work with it...

Hallo, can the FileZilla drag and drop to the upload Files of the Networkfolders ?

have you Informatioen.

thank you

Current cvs source doesn't compile:

source\FileZilla.cpp(146) : error C2675: unary '+' : 'class CString' does not define this operator or a conversion to a type acceptable to the predefined operator

relevant line is

config = +token;

My guess is that that is a typo for

config += token;

I have been uploading a big file at 32KB/s and suddenly it picked UP to 2.5MB/s!!! I checked it using Windows Networking Graph (Task Manager) and saw that Filezilla was actually liying... And the correct rate was about 0.5 of a 100Mbps line.

And it keeps on going up..

Dekel

When opening a file with case sensitive name, the file name is passed in lowercase to the editor (phpedit), so it is saved in lowercase when modifications are saved. When the file is directly opened from the explorer and save it, the file is saved with a case sensitive name.

OS: windows 2000 service pack 4

Connected successfully to a VMS system running VMS 7.2 and UCX 5.3 I see no directory listing. The "Dump Directory Cache" file looks like this:

FileZilla Directory Cache Dump

Dumping 1 cached directories

Entry 1: Path: DISK$CAM:[NINGERSOLL] Server: ningersoll@…:21, type: 256 Directory contains 0 items:

This is my root directory and there are a lot of files and directories. An "ls" from Windows FTP shows lots of files. Occassionally I see garbled VMS directory info. The debug file I have attached shows another version of the "Directory Cache".

Error message ('Incorrect parameter') when trying to edit an bandwidth restriction (for server and group, not tested for user).

the restriction was: From 8am To 8pm On Monday, Thuesday, Wednesday, Thursday and Friday

The only solution to edit the restriction is: remove it and add an new one.

FServeur Version: 0.8.9 OS: XP Pro SP1 Lang: French

Versions tested with problem: 2.2.5.100, 2.2.4.600

Environment: W2kSP4 running under VMWare Workstation 4

When browsing local filesystem, if you select a drive mapped to a VMWare share, a box pops up saying "The parameter is incorrect". For the rest of your session, the local file list box is grey and empty (but the treeview control continues to function). Upon exiting Filezilla, you will no longer be able to run it; when you attempt to execute it, there will be brief drive/processor activity, but no process appears in the task manager.

Examination of Filezilla.XML shows the following value:

<FileZilla>

<Settings>

<Item name="Default Folder" type="string">M:\</Item>

...where M: is the offending drive. Changing M: to C: allows Filezilla to work again.

Background on VMWare shares: VMWare allows the host to share folders, in much the same way as Windows Networking. In the guest OS, they appear as network shares & behave pretty much the same way. In the virtual machine, The Windows network view shows the following:

Entire Network

Microsoft Windows Network

workgroup_name

machine_name

share_name

VMWare Shared Folders

.host

.host\share_name

VMWare shares can be mapped to a drive letter and used the same as any other network share.

I don't know if this same problem occurs in other types of filesystems outside of the VMWare environment or not, but suspect it might...

Hello,

Thought I ought to let you know Installing 5 or 5a Reach the choose a directory section of install process The directory chooser widget is not displayed instead I get a Dr Watson error !

Regards

LG UK Developer

Display of VMS server information has garbled FileType information. The filetype, for example .TXT, is displayed along with the file version. Probably would be better to display the fill filename including the version and a "proper" filetype. However, I personally would be just as happy to have the version information completely ignored and have only one of a file, the highest version, be displayed.

After connecting to a custom FTP server on Linux, I'm able to see the directory listing, but when I try to open a directory, I hear a beep and do not descend into the directory. With debug turned on, I don't see any debugging when I try to open a directory.

I have also tried the FTP client in Internet Explorer, the command line FTP client in Linux and Windows/DOS, and WS_FTP. All of these clients are able to descend into the directory when connected to the FTP server.

This FTP server is running on port 2741. I'm running Filezilla 2.2.5a on Windows XP Pro, SP1.

Debugging information from Filezilla attached.

Using a certain file request (like: ./) returns the full path where the file lies.

For example: ​ftp://www.example.com/./

Will make the address bar in IE change to: ​ftp://www.example.com/C:/Documents%20and% 20Settings/Administrator/Desktop/ExampleWebSite/ (just an example).

This can be done with a simple limited read-only access to the server.

If you have questions, my email is erez8@…

Server08_0_9 Install to WINNT4.0 server caused exception: access violation (0xc0000005) error?

Access violation occurr and Dr. Watson log attached.

I am currently listing directories in the home directory of my server (v. 0.8.9) using windows shortcuts. When attepting to connect to my server using Internet Explorer I find that none of my directories in the home directory are listed. They are listed on my friend's FTP server (same version), however, because he just uses one of his hard drives as the home directory and hence doesn't use shortcuts. So I believe this is a problem with the way the server is resolving windows shortcuts. I also find them listed in an odd manner when I log in using the client, as if it notices that they are unresolved shortcuts.

I request that you fix this problem because I doubt Microsoft will fix it even if I asked them to, and I cannot install your client on every computer that I use even though I would like to. I have attached a log file of somebody logging on using Internet Explorer in case it proves useful.

Thanks in advance for your help.

Server does not accept ALLOCATE command (it should be treated as a NOOP command). It makes it unusable with my Embedded Linux. I'm using BusyBox, its ftpput command sends ALLO before file transfer starts to inform the server about the file size.

Jan Cablik cablik@…

Using the tilde (~) for home directory in "Default Remote Directory" or "Remote Site" doesn't work because a slash (/) or the PWD is put in front. The tilde indicates user's home directory, but can't have anything in front. The remote site will replace it by the actual directory.

When I'm trying to connect to a server(by TLS), connection is stopped after authorization !!!

Connection LOG: Status: Connecting to blabla... Status: Connected with blabla, negotiating SSL connection... Response: 220---------- Witaj na Pure-FTPd [TLS] ---------- Response: 220-Jeste¶ 1 u|ytkownikiem z 5 mo|liwych Response: 220-Lokalny czas: 20:33. Port serwera: 21. Response: 220-To jest prywatny system - Bez anonimowych logowaD Response: 220-IPv6 connections are also welcome on this server Response: 220 Zostaniesz rozB±czony po 5 minutach nieaktywno¶ci. Command: AUTH TLS Response: 234 AUTH TLS OK. Error: Timeout detected! Error: Unable to connect!

What I have to do ????

Hi,

if a file upload fails because the destination file already exists and is write protected, the file handle is locked. If this is a source file for example that has to be edited again, you are unable to save that file in your editor unless you close filezilla and so release that file. Removing the failed file transfer from the queue does not work, filezilla has to be closed completely. This is annoying because every cvs-driven development relies on the read-only file protection stuff and so I often have the requirement to overwrite read-only files. Wouldn't it make sense just to ask per popup "warning, write protected! Really overwrite?"

If this behaviour is too risky for most of the users, a preference caption like "[ ] automatically ask for overriding read-only files" would do the trick.

Greetings from Lüneburg/Germany, Eckard

I use filezilla to connect to a mainframe system. Couldn't change directories because slashes are appended to the dir name. I think the user should be allowed to put anything as dir name w/o any 'automatic change'.

Files containing : é è î etc ... are seen with other caracters under fillezillaserveur

FileZilla 2.2.5a

A delete of a fille on a VMS system fails because the file version number is missing.

Example.

Command: DELE SUPP$DIR:[DIR1.DIR2]XX.X Response: 550-Failed to delete file SUPP$DIR:[DIR1.DIR2]XX.X Response: 550 The file specification must contain a version number (even if wildcarded). Status: Retrieving directory listing... Command: PORT 172,20,24,1,4,195 Response: 200 PORT command successful. Command: TYPE A Response: 200 TYPE set to ASCII. Command: LIST

The fill file name in this example should be XX.X;3

The display of remote files shows the file name as "XX.X" but the filetype as "X;3 File".

The VMS command to delete this file would be

DELETE XX.X;3 or DELETE XX.X;* to delete all versions (the expected behaviour I would suspect in this case).

Ian.Gray@…

There are approximately 300 FTP connections in the Site Manager (FileZilla.xml is 83,211 bytes in size, approximately 83 KB). Having so many connections in Site Manager causes a ~1 second delay before Site Manager closes and opens up the selected FTP site. There seems to be a positive correlation between the number of FTP sites and the delay before connecting - increasing the number of FTP sites increases the delay, presumably because building the XML file takes longer with more connections.

Using latest build as of 2004-04-30, FileZilla_2_2_5a_setup.exe, on Windows XP Professional, Pentium III 800, 256 MB RAM. Contact: nwong-filezilla@…

Problem:

In Win XP, toolbar background color is a gradient going from lightgray (extreme left) to darkgray (extreme right), like Internet Explorer one.

But when changing the width of the main window (by dragging its right or bottom border), this toolbar background doesn't repaint itself properly.

Solution (very easy):

Put the following class styles:

CS_VREDRAW | CS_HREDRAW

in the first parameter of AfxRegisterWndClass() in mainfrm.cpp.

cvs version

Server.cpp

CServer::WindowProc

for (std::list<CServerThread *>::iterator iter =

pServer->m_ThreadArray.begin(); iter != pServer->m_ThreadArray.end(); iter++, i++)

for (std::list<CServerThread *>::iterator iter =

pServer->m_ClosedThreads.begin(); iter != pServer->m_ClosedThreads.end(); iter++, i++)

causes this compilation error:

FileZilla Server\source\Server.cpp(188) : error C2086: 'iter' : redefinition

on MSVC6

version: FileZilla Client 2.2.5a o/s: Windows XP & 2000 description: When browsing or uploading files from CD gives error. error message: pop-up window saying "The parameter is incorrect"

If I create a new folder on the server with FileZilla and I try to change attributes appear an error message.

spelling error in Response text Response: Fatal: unable to initialise SFTP: could not

Spelling error "initialise" should be "initialize"

I noticed that when I set a bunch of files to upload and they are queued, I cannot change the remote directory into another directory while files are queued to upload. It would make sense to allow you to change remote directories for other files you want to queue and upload instead of having to wait until the last upload finished before you can queue more files to upload.

I think the welcome message should be updated every time it is changed.

Currently I have to restart the server for the changes to take effekt.

Using the v2.2.6 version, when I right-hand-click and 'download' a single file (which is a symbolic-link to the real file stored in a remote directory) the FTP is request is successful and the file is download immediatly.

However, if I use [ctrl][a] or select multiple files and then 'download' them FileZilla gets into a lengthy, almost recursive loop, presumably trying to build a filelist. With a small number of files the download is successful.

It might be that is re-freshes the remote filelist between the analysis of each of the symbolic-link files, re- counting the number of files in the directory???

Many Thanks Mike <mike@…>

Using Filezilla v2.2.6 (configured to use the French language pack) under the French version of Windows ME, I have noticed that the list that contains the custom file associations sometimes "empties itself" when I close/restart Windows (and therefore Filezilla too). Filezilla is configured to use the settings from the Registry (not from the XML file) since I have various user profiles in Windows.

(C) year needs to be bumped to 2004 ;-)

When connecting to an FTP server using TLS, the connection hangs before retrieving the directory listing. Connection is direct (no firewall). I'm using Filezilla 2.2.6. A zip file containing two logs is attached; 1 log from an unsuccessful attempt to connect using Filezilla, the 2nd from a successful connection attempt using CuteFTP 6.0

Hi,

I'm really pleased with Mozilla, except for one thing. Whenever I upload files, the date/time stamp is not the same as the local date/time stamp.

This is particularly annoying as some files are dated 2002 to 2003, and the upload date/time stamp results in the server date/time stamp. This makes comparing files local<-->remote very difficult. It doesn't appear to be a server problem, because I have used Leech FTP on the same server, for an upload, and the datetime stamp (from local) was preserved.

Peter (peter_j_richards@…)

I am trying to download a SuSE 9.1 DVD.

The actual size on the server is 4.126.703.616 bytes I paused FileZilla paused after 4.196.548.428 byte since it reported 100% bud did not end.

After a Filezilla restart i got the following messages

Command: TYPE I Response: 200 Type set to I Command: PORT 9,145,244,119,11,245 Response: 200 PORT command successful Command: REST 4196548428 Response: 350 Restarting at 2147483647. Send STORE or RETRIEVE to initiate transfer Command: RETR SuSE-9.1-DVD-i386-RC2-DVD1.iso Response: 150 Opening BINARY mode data connection for SuSE-9.1-DVD-i386-RC2-DVD1.iso (1979219969 bytes)

Is this a bug or feature ?

Manfred Hantl

filezilla attempts to use multiple connections to a server when uploading files, which is not allowed by some servers... some servers are even configured to temporarily ban ip address that attempt to establish multiple simultaneous connections...

note: i did read the rules...

Login to SourceForge

not possible, due to the fact that sourceforge will not let me register

If possible, attach a log file from FileZilla which

shows the problem. For client logs, both "Trace messages from the FTP engine" and "Show raw directory listing" should be enabled on the debug page in the settings dialog.

not possible, due to the fact that i'm on dialup and the connection times out when i try to attach the log file

FileZilla version 2.2.7 - File transfer option resume verses ask doesn't get saved. It always goes back to "ask". Infact when you select resume instead of ask the ask selection still shows as selected.

Menu option "Edit" Tap "File Transfer Settings" Option "If the target file of a transfer already exists, you can specify a default.

Ask, Overwrite, Resume, Skip.

No matter what I choose here it doesn't save it; additionally it doesn't de-select the Ask when another option is selected.

Thanks.

Connect to FZServer using the admin interface on another computer. If you want to add a directory (in the user accounts dialog), the directory chooser shows the local filesystem. But it is no use, if I choose a local directory which does not exist on the server.

Workaround is to press cancel and type in the directory manually.

I think the directory chooser should always display the file system on the server.

i use FileZilla client ftp and wanted to try the server but here is a problem...

if use don't use the C drive (or a C drive subdir) , you don't assign the right path...i show you an exemple...

-i configured the path "e:\ftp" as my home director that i nename as "ftp" -when i connected with a client ftp (filezilla) i did not have the files i should...the client told me that there is no file and no subdir in my home dir.....strange!!!!.... -in fact not realy....i decided to create a sub dir in my home dir that i called "123"...then i uploaded a file in my homedir and in my subdir (123)... -the filetransferts worked well... -BUT!!!!!!!!when i wanted to search the uploaded files in my directory "e:\ftp" on my E drive...you know what i had no "123" directory that i was supposed to had creating...and none of the two files i uploaded..... -SO....where were they???? nopb i lounched a search on all my drive to find the two files......you want to know the result??....sure you do ;-) the first one was in "c:\windows\system32\ftp" and the second one in "c:\windows\system32\ftp\123"

Hope you debug that shortly !!!!!!!!!!!!

good luck for the project !!!!

Yomm

PS: computer OS : win XP Home fillezilla server version : 0.9.0 beta

If FileZilla Server is Offline and you open the Group Management FZ duplicates all Groups. Looks like it happens only if there are no users configured.

version 2.2.7 doesn't "overwrite if newer" any more.

I was using FileZilla 2.2.6 without any problem with FTP servers with SSL/TLS support.

With FileZilla 2.2.7, i've the error message when i'm connecting to the server : ######## Can't load SSL libraries. Please make sure the files "ssleay32.dll" and "libeay32.dll" are in the same folder as FileZilla. ########

These files are present in the FileZilla setup directory...

I've tried to uninstall/resinstall FileZilla and there's always problems with 2.2.7, not with 2.2.6...

After some minutes, the server blocked file transfer. There were two simultaneous downloads (global limited to 8kb/s) and one upload. After this I tried to stop the service, but i could not do this. The service was not accessible.

I installed the newest version of Filezilla (2.2.7) but it is impossible to upload existing files.

Befehl: FEAT Antwort: 500 'FEAT': command not understood. Status: Verbindung hergestellt Status: Starte Upload von c:\website\index.php Befehl: CWD /home/*/ Antwort: 250 CWD command successful.

I have to delete the file otherwise the file will not be updatet.

In both Filezilla 2.2.6 and 2.2.7 (at least) Filezilla is attempting to send PASV mode command when it should not be. I have PASV turned off in firewall options AND I have "Use Active Mode" explicitly set in the site for Site Manager (I've tried to use default in site manager also.) This is causing me errors as the FTP server I am speaking to does not gracefully handle being asked to go to PASV. However, since there is no reasno for filezilla to be sending the PASV command it is clearly a bug.

Occasionaly filezilla can not retrieve remote directory listing after connecting. I really can't figure out what causes this. When I switch to WS-FTP I can get the listing fine, and often I can reboot (windows obviously) and filezilla will then be able to get the remote listing. This is frustating because I like the Filezilla GUI better than ws-ftp.

In 2.2.7, view/edit has stopped working. I'm using notepad as editor. When doing view/edit, notepad pops up with the marked file. When I change and save the file, there is no question like in previous versions, like "the file has changes, do you want to upload the file?"... So it is now impossible to edit files on the server.

Please correct this!

1. it cannot show directory listings on connect
2. it cannot xfer more than a few files before choking
3. it hangs on retrying very often

2.2.5 was wayyyyyyyyyyyyyyyyyyy more usable than this version ... what happened?

:|

Upon resuming an FTP download of a large file, Filezilla takes up 100% of CPU usage on Windows 98 SE, and mouse pointer movement gets extremely sluggish. After the connection is established, all returns to normal. If the download fails, Filezilla will retry the connection, and upon resuming it again the problem happens again but worse: the system seems to lock up completely for about 60 seconds (sometimes more, sometimes less). Most of the times, the connection is established and the system becomes responsive again after that lock-up period, but sometimes the lock-ups require a hardware reset.

If more than one large file are being downloaded, the lock-up caused by one transfer can make the others fail, so that they in turn lock the system up and make the first resumed download fail too.

This only happens when the resume position (the parameter for the RSET command) is large enough. Resuming the download of a large file on a position near zero doesn't cause any lock-up.

I guess (without looking at Filezilla's source) that there's some blocking call being made while Filezilla waits for the remote server to seek() to the RSET position.

In case that this be a server-dependent bug in Filezilla (I don't think it is), here's an example: I've experienced this problem while downloading the Mandrake distribution from many of the USA mirrors (for example, ​http://www1.mandrakelinux.com/ftpredir.php?url=ftp://mirror.cs.wisc.edu/pub/mirrors/linux/Mandrakelinux/official/iso/10.0/i586&tpc=mirrors-iso-Mandrakelinux-10.0-Official-inst-i586.txt ). This is a 700 Mb file. And for the record, Filezilla was run on a 400 Mhz AMD K6-3 processor.

Using the version 2.2.7a (downloaded as executable) on WINXP, i cannot change the default file viewer, because when i click on edit/settings menu nothing appears and i must kill the application from the task manager. the same problem with the 2.2.7 version. Using, instead, the 2.2.6 version (downloaded as zip file) the configuration panel appears and i'm able to change everything.

Double clicking a directory named ~ returns the navigator to the root, rename will not allow you to name directories ~.

LForopoulos (At) microimagesinc.com

Hy, The sort order of the local directory list is like the physical, but the one of the server is sorted alphanumerical descending. They should be the same. It would be nice to have the opportunity to choose.

• Thanks

If change language to Italian and try to open Setttings Filezilla hung and does not respond.

When I try to connect to one of our FTP servers here, the connection fails with the following:

Response: 232 User jeaton logged in. Command: FEAT Response: 211-Supported features: Error: Disconnected from server Error: Unable to connect!

When I don't use GSS authentication, it succeeds with:

Response: 230 User jeaton logged in. Command: FEAT Response: 211-Supported features: Response: MDTM Response: REST STREAM Response: SIZE Response: 211 End Status: Connected

(Plus more output, getting a directory listing, etc.)

The server is based on the Heimdal FTPd: (Version 6.00+Heimdal 20040105+KTH-KRB 1.3-20031030)

I'm using FileZilla 2.2.7a, with the patched FzGSS.dll from 924180 (which I've also updated, to ask for a status on when that fix will be incorporated into a release).

Hi.. First, thank for your program..

Qeustion is this.. When I upload the files, permission of Uploaded file set Automatically -rw------- (600) mode..

I frequently would do use this program for web development. So, default permission of uploaded file must be 755 or etc.

And Now I manually modified permission of these file...

Please make to modify configuration that...

Please overlook that my English is short.. ;; Good luck to you..

Hi, so far I like filezilla but with the following few notes.

It would benefit from up and download buttons on the toolbar. Right click to transfer seems an unnecessary strain on the carpel.

"Clear queue" wouldn't hurt anything either.

More importantly, v2.2.7a seems to be causing performance issues. Specifically, it's slow to open and some operations impact on other programs - most notably windows explorer. The system appears to be not responding until Filezilla sorts itself out. Then it's okay again.

I did a clean install on winxp so filezilla is virtually the only thing installed.

I was trying out the "overwrite if newer" feature... which I couldn't get to work =( Doing server backups without the need to download everything over and over each time is the goal.

I hope these things can get straightened out.

Thanks for a great job so far.

PS. Feature request. I don't know if it's possible but an option to follow symblic links or not follow them might be handy. I haven't played around enough to know the default behaviour yet.

• Phineus

Note. This forum always gives me a hard time. That's why I'm not logged in. I hope you don't mind. Also, you do not need to reply. It's enough that I report my experience. I'll check back for program updates and see what you come up with.

I am using 2 Solaris machines. V480(SunOS 5.8) and E3500(SunOS 5.7). If I connect the server with Filezilla, it is listing files properly on SunOS 5.7 but it's not listing any files on SunOS 5.8. If I use some other FTP (AceFTP), it lists files on SunOS 5.8 properly. If you need more feedback on this issue please let me know.

When FZ is in tryicon (and downloading files Q->), Transfer Queue list (at the bottom) lost when I shutdown windows.

FileZilla makes a little space in system tray when there are no icons in system tray. <img src="​http://file.manian.intizen.com/board/downadd.asp? bid=A020107&no=84560" border="0">

Whow... i reinstalled filezilla after upgrading my pc... and expected when i exported all the settings (edit->export settings) that also all the sitemanager servers would be copied...

mmm... lost them...

maybe a good plan for a future realease to export these settings too?

Thanx! And keep up the really good work!

When logging onto a IBM MVS system FileZilla can not retrieve a directory listing. That is fine because I would rathter enter the specific directory to go to at that point. Unfortunately when this happens, the Remote Directory listing area is disabled and I cannot type the directory I want.

Please enable the remote directory listing area for manual entry.

To reproduce:

1. Open up FileZilla
2. Connect to an FTP
3. Navigate the "Local Site:" to a network share, i.e.

server\folder with subfolder test

4. Click on the subfolder test and drag and drop it to

the remote folder listing, and FileZilla does not upload that folder.

This works for local drives, however not for network shares.

Also, if you map the network share to a local drive letter, it works.

when running a silent uninstall

"C:\Program Files\FileZilla\uninstall.exe" /S

a dialog is displayed asking about deleting registry keys. should this not be silent too?

installed using FileZilla_2_2_7b_setup.exe /S

i know there is no need for uninstall prior to upgrading in current releases, but that may change.

cheers ken@…

I've got a problem when browsing directories on a SunOS 5.8 serveur. The bug has been reproduced with Fzilla 2.2.5 -> 2.2.7

It seams that all items (files and directories) that have been created or modified after 1st july 2004 does not appear ine the list.

Nevertheless when I enable raw directory listing in the debug pannel they are present.

You'll find hereafter a subpart of of the directory list. I've not included a screenshot but I testify that at least the "tmp" dir and the "util" dir are not present in the directory list

Trace : total 872 Trace : drwxrwxrwx 45 ugdc gold 1536 jui 8 12:47 . Trace : drwxr-xr-x 75 upmnr gprod 1536 déc 22

2003 ..

...

Trace : drwxr-xr-x 3 ugdc gold 512 oct 29

2003 SAUVEGARDE

Trace : drwxrwxrwx 4 ugdc gold 512 fév 14

2003 src_globale

Trace : drwxrwxrwx 3 ugdc gold 512 nov 25

2003 surgeles

Trace : drwxrwxrwx 9 ugdc gold 7168 jui 8 14:10 tmp Trace : drwxrwxrwx 2 ugdc gold 512 fév 21

2003 trsf

Trace : drwxr-xr-x 2 oracle oinstall 1536 fév 6 16:58 TTS_2141 Trace : drwxr-xr-x 2 oracle oinstall 512 fév 6 15:46 TTS_25420 Trace : drwxr-xr-x 2 oracle oinstall 512 fév 6 15:51 TTS_26153 Trace : drwxr-xr-x 2 oracle oinstall 1536 fév 6 16:44 TTS_26259 Trace : -rwxrwxrwx 1 ugdc gold 15516 sep 4

2003 typescript

Trace : drwxrwxrwx 3 ugdc gold 512 jan 22

2003 users

Trace : drwxrwxrwx 14 ugdc gold 10240 jui 8 13:43 util Trace : drwxrwxrwx 2 ugdc cvs 1024 jun 21 15:25 util_cvs Trace : drwxrwxrwx 3 ugdc gold 8704 jun 23 12:10 util_dev Trace : drwxrwxrwx 3 ugdc gold 512 mar 25 14:44 voc Réponse : 226 ASCII Transfer complete. Etat : Succès du listage du répertoire

Cheers

I just downloaded and unzipped the 2.2.7b zip, thinking my version was too old, but I still get the same behavior:

I double-click FileZilla.exe, and nothing happens.

Windows 2000sp4

I check task manager and the process is running, but it has not created any top-level windows.

I don't really know how to debug it.

I can not compile the source (I tried that, but it requires some platform sdk changes I think, which I don't have).

Any suggestions?

Configuration:

Multihomed windows machine, IP 1.2.3.4 and 1.2.3.5

Filezilla server 0.9.1b, configured to listen on 1.2.3.5 and to use 1.2.3.5 for PASV too

Problem:

opening an ftp (active) session to 1.2.3.5:21 works and the logon completes successfully, but trying to retrieve bombs with a "425 Can't open data connection" error

running a "netstat -an" on the machine running FZserver shows the 1.2.3.5:21 in ESTABLISHED state but also shows some 1.2.3.4:20 in TIME_WAIT state, this seems to indicate that FZServer isn't using the correct IP for the data channel when running on a multihomed system even if it has been configured to use a particular IP a confirm is the fact that using PASV solves the issue since in that case the FZserver will be forced to use the correct IP address

To reproduce:

Start uploading a file. While the file is uploading:

edit->settings->file transfer settings->speed limit->upload speed limit:

Change from "no limit" to "upload speed limit of " (I used 4KB).

Hit "ok". Blammo. Upload stops.

Download is ok.

HTH.

I just installed the latest server and client, opened firewall holes for ftp port. client will connect to server, but server refuses to transfer directory or anything and disconnects after timeout.

(Problems in text on dialog)

FileZilla Server 0.9.1b beta

General Settings/IP Filter

"...or address ranges of if you block..."

I'm pretty sure that should be "...or address ranges, or if you block" (typo "of" => "or" and insert comma).

Further along in the same paragraph:

"...you may readd access..."

I'm not as sure what this should be. Perhaps:

"...you may reenable access..."

I was in the process of adding a huge site to the Queue. So I went to the root site and right-click "Add to queue". The process runs.. and since this is such a huge site, I let it run over-night.... Sometime during the night, the connection is broken and my queue is populated, but not with the whole site. In fact, it's very difficult to know when the process has even finished.

May I suggest 1st and foremost, a queue for the queue, so if something happens, I can re-load my last task and pick up where I left off.

Also, a message box that tells when my task is done, so I know it has completed 100% sucessfully.

• c4(at)audiline[dot]com

commandqueue.cpp/.h are in lower case while Mainfrm.cpp tries to #include it as CommandQueue.h

In Windows, this is fine, but on UNIX, this fails.

spamthis@…

I'm continuing to experience this problems with 2.2.7c, windows version.

On a first connect after I start Fzilla, it gives me an error: Could not retrieve directory listing

After i Disconnect and Reconnect, this issue goes away. I tryed numerous times and was perfectly able to replicate this problem.

current cvs source

When I open the dsw (FileZilla.dsw), it lists the Catalan translation as missing.

It appears that the dsw expects the Catalan project to be FzResCatalan.dsp, but the actual file is currently FzResCa.dsp.

Currently, public key authentiation thru Pageant (Putty Key Agent) works fine. But FZ still pops up a password dialog, even though the value from that is not used.

It would be nice to first check Pageant, and see if key authorization works with the remote, before this dialog is brought up. Putty's current method for this user interface is a good sample to follow.

Cordially, Chacko

When uploading your FTP V227c to your FTPServer with a large amount of directories anda large number of files, the function desynchronizes with a message "UPLOAD FAILED". Stopping the upload, disconnecting your FTP program and restarting doesn't help. CuteFTP does the work perfectly. So it must be FileZilla Small number of direcvtories with large amount of files are OK. ????

hello,

sorry, my english isn't that great and i hope "line-makeup" is the right word for the german "zeilenumbruch"...

my problem: even i download a ascii-file (like a php-file) from a linux server filezilla(2.2.7c) puts 2 line-makeups for each line.

exaple/original-file: --- <?php echo "hello world"; ?> ---

downloaded-file: --- <?php

echo "hello world";

?> ---

my os is windows 2000. any ideas?

thanks tobi

I am using FileZilla Server 0.9.2 beta. If I'm connected to a remote Server and want to edit the shared Folders for Groups and Users, the browse for folder dialog gives me not the directory structure of the remote machine. Instead it displays the local filesystem. Manually changing (rename) the path to the wanted directory on the traget machine works.

Another odd problem: no mapping of virtual folders into virtual folders is possible.

Thanx in advance for fixing this, and keep up the good work.

when i give a user the read and list right for some dir, than all dir's in that folder are automaticly listed. in all other ftp server i've tested a subdir is only listed when you have the read right for that subdir. which i think is normal. no i can't hide subdir's for some users which is very anoying.

example:

C:\serverdir\group\all\ C:\serverdir\group\hidden\

if i give group A read and list rights to the "group" dir, the get to see both dir's in there, "all" and "hidden". i want to give them read and list right but not to see any dir in there. unitil.. i give them read rights for the "all" and/or "hidden" dir's.

with other ftp server (like bulletproof) this is perfectly possible, with filezilla server it is not...

Using version 2.2.7c, Windows XP Professional SP1

While using the Settings->Interface Settings->Remote file list window, I have found that the "Filetype" and "Permissions" checkboxes do not dim as they should when I click from "Always use the following configuration" to "Remember last used configuration".

While transfering several folders with checkbox "Use multiple connections to transfer files" unchecked Filezilla will still use a second connection. This is clearly shown in the log. A second connection is established while FileZilla creates the folders you want to transfer on the remote side. Then, as sonn as all the folders have been created, Filezilla uses the second connection to actually transfer the files in the folders.

Expected behavior would be not to use a second connection when the "Use multiple connections to transfer files" checkbox is unchecked.

The erroneous behavior could lead to being banned from sites which do not allow multiple connections in parallel.

if the folder name is unicode the function GetFileAttributes fails in the retr command causing the return message file not found prependinga
?\ to the pathname would call the unicode variant of GetFileAttributes, it works then correctly but the
?\ is NOT compatible with windows 95/98/me

If you delete a lot of files of one directory (more than 500), it is very slow, beacuse FileZilla refreshes after each file and loads again the whole directory. The deleting-process gets faster with each file that was deleted!

I run Windows 2000 SP4 and FileZilla 2.2.8a. I have installed Norton Systemworks 2004 with Norton AV 2004. When I try to run FileZilla it crashes with an unhandled exception before the main window is shown. If I disable the Auto-Protect in Norton AV it works just fine.

Status: Connecting to XXX.NET... Trace: FtpControlSocket.cpp(759): OnConnect(0) OpMode=1 OpState=-1 caller=0x003ed584 Status: Connected with XXX.NET. Waiting for welcome message... Trace: FtpControlSocket.cpp(627): OnReceive(0) OpMode=1 OpState=-1 caller=0x003ed584 Response: 220 ntf Microsoft FTP Service (Version 5.0). Command: USER XXX Trace: FtpControlSocket.cpp(627): OnReceive(0) OpMode=1 OpState=0 caller=0x003ed584 Response: 331 Password required for XXX. Command: PASS Trace: FtpControlSocket.cpp(627): OnReceive(0) OpMode=1 OpState=3 caller=0x003ed584 Response: 230 User XXX logged in. Command: FEAT Trace: FtpControlSocket.cpp(627): OnReceive(0) OpMode=1 OpState=-13 caller=0x003ed584 Response: 500 'FEAT': command not understood Status: Connected Trace: FtpControlSocket.cpp(3456): ResetOperation (1) OpMode=1 OpState=-13 caller=0x003ed584 Trace: FtpControlSocket.cpp(904): List (FALSE,0,"","",1) OpMode=0 OpState=-1 caller=0x003ed584 Status: Retrieving directory listing... Command: PWD Trace: FtpControlSocket.cpp(627): OnReceive(0) OpMode=4 OpState=0 caller=0x003ed584 Response: 257 "/" is current directory. Trace: FtpControlSocket.cpp(904): List (FALSE,0,"","",0) OpMode=4 OpState=0 caller=0x003ed584 Command: PORT 192,168,0,100,16,163 Trace: FtpControlSocket.cpp(627): OnReceive(0) OpMode=4 OpState=7 caller=0x003ed584 Response: 500 'RT XXX,XXX,XXX,XXX,19,143': command not understood Trace: FtpControlSocket.cpp(904): List (FALSE,0,"","",0) OpMode=4 OpState=7 caller=0x003ed584 Trace: FtpControlSocket.cpp(3456): ResetOperation (4) OpMode=4 OpState=7 caller=0x003ed584 Trace: TransferSocket.cpp(91): ~CTransferSocket() caller=0x0140066c Trace: TransferSocket.cpp(1083): Close() caller=0x0140066c Error: Could not retrieve directory listing

I run Windows XP and find that Filezilla Server often does not connect. It evidently starts too early in the boot process, before other needed services are available.

Is it possible to put a variable user chosen delay in the start up of the Filezilla Server service?

Bob Eisenberg beisenbe@…

It is not possible to upload files into directories that one CAN write in but had no listing rights in with FileZilla 2.2.8a.

Directory shows permissions 000 from /.

Attached file includes logs of 3 ftp sessions:

• Session with commandline ftp (succesful upload of

test3 to /Upload/)

• Session with FileZilla 2.2.8a (failed CWD to /Upload/)
• Session with FTP Voyager 11.1.0.0 (succesful upload

of test4.txt to /Upload/)

Please contact me if you need access to the site for upload testing.